{"title":"ARANA","description":"\u003cp\u003eBrowse 108 ARANA products at British Garage, including shocks, struts \u0026amp; suspension and body \u0026amp; trim parts. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked UK delivery on every order and 30-day returns.\u003c\/p\u003e","products":[{"product_id":"arana-hood-struts-for-nissan-titan-armada-2004-2015-pair-oem-fit-long-life-gas-assist","title":"ARANA Bonnet Struts for Nissan Titan \u0026 Armada 2004–2015 — Pair, OEM Fit \u0026 Long-Life Gas Assist","description":"\u003cp\u003e\u003cstrong\u003eARANA Hood Struts are a direct-fit, two-piece replacement designed to lift and hold the hoods of Nissan Titan and Armada models from 2004–2015 with reliable gas-assisted support.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen an original hood lift weakens it makes everyday vehicle access slower and less safe. These ARANA replacement struts are engineered to match OEM fitment and mounting points while improving longevity and operation. They arrive as a pair and include construction and part-number guidance so you can confirm compatibility before install.\u003c\/p\u003e\n\n\u003ch3\u003eWill these struts fit my Nissan Titan or Armada?\u003c\/h3\u003e\n\u003cp\u003eYes — these ARANA struts are made to replicate the factory mounting and stroke length for Nissan Titan (2004–2012), Armada (2005–2015), and some Pathfinder years listed by the manufacturer. Always compare the original part number on your vehicle to the compatibility list to ensure a correct match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck OEM numbers: 95410, 14260, 4182, 654707S000, 654717S000\u003c\/li\u003e\n  \u003cli\u003eAlternate reference: 65471-7S000, 8196154, 9917VK\u003c\/li\u003e\n  \u003cli\u003eManufacturer codes: E95410, SG425003 — verify before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these struts compare to the original equipment?\u003c\/h3\u003e\n\u003cp\u003eARANA uses carbon steel rods, airtight seals, and durable gas charge techniques to surpass many worn OEM units. They are rated for long cycle life and are built to resist common failure modes like gas loss and corrosion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered for 50,000+ compression cycles for extended service life\u003c\/li\u003e\n  \u003cli\u003eCarbon-steel construction improves strength over many stock struts\u003c\/li\u003e\n  \u003cli\u003eAirtight seals and finish resist leaks and corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and can typically be completed in about five minutes with only a screwdriver or small wrench. The struts mount to the same ball studs as OEM parts — no cutting, drilling, or special tools required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple pop-on ball socket and retaining clip attachment\u003c\/li\u003e\n  \u003cli\u003eApproximate install time: 5 minutes per side for one person\u003c\/li\u003e\n  \u003cli\u003eNo professional mechanic required; minimal hand tools recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kind of warranty and customer support is offered?\u003c\/h3\u003e\n\u003cp\u003eARANA provides a 365-day post-delivery support window to help with fitment questions, replacements, or warranty issues. Customer service aims to resolve compatibility or performance concerns quickly so you can get back on the road.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e365-day worry-free service for defects and fitment support\u003c\/li\u003e\n  \u003cli\u003eDirect support for troubleshooting installation and part-number verification\u003c\/li\u003e\n  \u003cli\u003eInstructions and customer service available if any issue arises after delivery\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: These replacement hood struts suit owners and DIY enthusiasts who drive Nissan Titan (2004–2012), Nissan Armada (2005–2015), or compatible Pathfinder models and want a durable, affordable alternative to dealer-priced units. Ideal if your current hood feels heavy, drops unexpectedly, or shows signs of oil seepage at the rod. If you want an easy, cost-effective fix with clear OEM cross-references and a 365-day support promise, this ARANA two-piece set is built for you.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts replace the factory parts directly?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are made as direct-fit replacements, but confirm your vehicle's OEM part number before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take and what tools are needed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Installation usually takes about five minutes per side and typically requires only a screwdriver or small wrench.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55161000853847,"sku":"B00VJWRIAI","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-hood-struts-front-pair.jpg?v=1790320490"},{"product_id":"arana-10mm-ball-stud-brackets-for-gas-struts-4-pc-set-with-16-screws-galvanized-steel","title":"ARANA 10mm Ball Stud Brackets for Gas Struts — 4-Pc Set with 16 Screws, Galvanized Steel","description":"\u003cp\u003e\u003cstrong\u003eARANA 10mm ball stud mounting brackets are a four-piece steel bracket set with 16 screws, designed to attach 10mm gas struts securely to lids, doors, and frames.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese mounting brackets give you a simple, durable way to fit universal 10mm gas springs—two angled brackets for lid or cover attachment and two flat brackets for side-frame mounts. Constructed from galvanized steel, the brackets resist corrosion and pair with both nylon- and metal-head gas struts. The included screws and clear hardware selection make installation straightforward for automotive repairs, furniture upgrades, or DIY projects.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these brackets attach to my gas struts and panels?\u003c\/h3\u003e\n\n\u003cp\u003eThe brackets accept 10mm ball studs and secure to your panel or hinge point with the supplied screws. The angled pair is shaped to sit on a lid or door edge while the flat pair mounts flush against vertical frames. Together they let the gas strut pivot on the ball stud while keeping fasteners hidden and tight.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes two angled and two flat brackets plus 16 screws for immediate mounting\u003c\/li\u003e\n  \u003cli\u003eFits 10mm connector bores on both nylon and iron strut heads\u003c\/li\u003e\n  \u003cli\u003eGalvanized steel construction for a strong, rust-resistant connection\u003c\/li\u003e\n  \u003cli\u003eBall-stud pivot gives smooth opening and closing motion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these brackets work with my specific gas springs and weight requirements?\u003c\/h3\u003e\n\n\u003cp\u003eThese ARANA brackets are compatible with most universal gas springs that use a 10mm ball end. They are engineered to handle common loads used in automotive and furniture applications—suitable for struts rated up to approximately 200 lb when mounted correctly and paired with appropriate struts. Always check your strut’s rated force and mounting geometry before final installation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned for any gas strut with a 10mm connector bore\u003c\/li\u003e\n  \u003cli\u003eCompatible with both nylon-headed and metal-headed struts\u003c\/li\u003e\n  \u003cli\u003eAppropriate for struts in the typical 0–200 lb range depending on setup\u003c\/li\u003e\n  \u003cli\u003eUse correct screw locations and surface reinforcement for heavier loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools do I need?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is a quick, straightforward process suitable for DIYers and technicians alike. Most users can complete the job in about five minutes per bracket once pilot holes are marked. Basic tools—drill, screwdriver or socket set, and measuring tape—are all that's required.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDrill and bit for pilot holes; screwdriver or socket for the included screws\u003c\/li\u003e\n  \u003cli\u003eMeasure and mark bracket positions to ensure correct strut geometry\u003c\/li\u003e\n  \u003cli\u003eNo specialized skills required; follow torque guidance to avoid stripping\u003c\/li\u003e\n  \u003cli\u003eSwap between angled and flat brackets to match lid or frame mounting needs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finishes are used, and will they resist rust?\u003c\/h3\u003e\n\n\u003cp\u003eARANA brackets are fabricated from steel and receive a galvanized finish to slow corrosion and extend service life in everyday environments. The protective coating helps maintain a secure connection in garage, boat, or household settings, but saltwater exposure or industrial atmospheres may require extra protection or stainless alternatives.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eGalvanized steel resists surface rust under typical indoor and outdoor use\u003c\/li\u003e\n  \u003cli\u003eSolid construction prevents deformation under normal operating forces\u003c\/li\u003e\n  \u003cli\u003eUse additional sealants or stainless hardware for high-corrosion environments\u003c\/li\u003e\n  \u003cli\u003eRegular inspections recommended for heavy-use or marine installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The ARANA 10mm ball stud mounting bracket kit is aimed at car owners doing trunk or hood strut replacements, furniture makers fitting lift-assist mechanisms, and DIYers who need a reliable, off-the-shelf mounting solution for 10mm gas struts. If you want a corrosion-resistant steel bracket set with both angled and flat options and all necessary screws included, this kit simplifies installation and gives a long-lasting pivot point for your gas springs. For any fit questions or post-purchase issues, ARANA provides responsive support and a 365-day assistance window.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these brackets compatible with all 10mm gas struts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—compatible with universal gas struts that use a 10mm ball connector, including nylon and metal heads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need extra tools or parts to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No extra parts are included, but you’ll need a drill, screwdriver or socket set, and measuring tools for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55161063965015,"sku":"B08MWLPYD8","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-front-view-packaging-and-brackets.jpg?v=1790321606"},{"product_id":"arana-telescoping-hood-prop-rod-adjustable-16-95-40-15-in-padded-end-support-for-hands-free-hood-tailgate-work","title":"ARANA Telescoping Hood Prop Rod — Adjustable 16.95–40.15 in Padded-End Support for Hands-Free Hood \u0026 Tailgate Work","description":"\u003cp\u003e\u003cstrong\u003eThe ARANA Universal Telescoping Hood Prop Rod is an adjustable, tool-free support bar that holds open car hoods, tailgates and other lids safely while you work.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for DIY car care, quick roadside access and everyday convenience, this extendable support rod replaces worn factory struts or supplements them when extra stability is needed. The rod compresses to 16.95 inches for compact storage and extends to 40.15 inches to suit a wide range of vehicles and applications. Crafted for easy setup and reliable load-bearing, the ARANA telescoping prop puts your hood or door in a fixed, hands-free position so you can inspect, repair or load with confidence.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the telescoping rod attach and stay secure?\u003c\/h3\u003e\n\u003cp\u003eThe ARANA rod uses a friction-lock telescoping mechanism with adjustable length, plus end fittings designed to seat against hood or door edges. Installation takes only moments and no special tools — simply expand to the desired length and set the end points in place.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtendable from 16.95\" to 40.15\" for precise fit\u003c\/li\u003e\n  \u003cli\u003eFriction lock maintains chosen length under load\u003c\/li\u003e\n  \u003cli\u003ePadded end caps protect paint and provide grip\u003c\/li\u003e\n  \u003cli\u003eWorks with hoods, tailgates, canopies and aquarium lids\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much weight and movement can the support rod handle?\u003c\/h3\u003e\n\u003cp\u003eARANA designed this prop for strong load-bearing without bending or slipping during typical maintenance tasks. It provides steady support for open lids so you can work safely without bracing the hood by hand.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust internal shaft resists deformation\u003c\/li\u003e\n  \u003cli\u003eSecure seating prevents lateral sliding\u003c\/li\u003e\n  \u003cli\u003eSuits most passenger cars, trucks, SUVs and utility lids\u003c\/li\u003e\n  \u003cli\u003eNot intended as a permanent replacement for damaged structural parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow fast is setup and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eSetup is tool-free and takes less time than a coffee break: adjust the rod length, position the end fittings, and the hood is supported. This makes routine checks and light repairs faster and more convenient.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall in under three minutes\u003c\/li\u003e\n  \u003cli\u003eNo bolts, drills or brackets required\u003c\/li\u003e\n  \u003cli\u003eCompact compressed length stores easily in trunk or garage\u003c\/li\u003e\n  \u003cli\u003eQuick-release adjustment if repositioning is needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect for durability and aftercare?\u003c\/h3\u003e\n\u003cp\u003eThe ARANA prop is made to resist everyday wear and to maintain performance over repeated use. Simple care like cleaning dirt from contact points and storing the rod compressed will keep it functioning smoothly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant finish for outdoor use\u003c\/li\u003e\n  \u003cli\u003eReplaceable end caps extend service life\u003c\/li\u003e\n  \u003cli\u003eInspect telescoping sections for grit or damage before use\u003c\/li\u003e\n  \u003cli\u003e365-day replacement support included with purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ARANA Universal Telescoping Hood Prop Rod is ideal for vehicle owners who perform their own maintenance, automotive technicians who need a portable support solution, and anyone who wants a quick, reliable way to hold open hoods, tailgates or lids without relying on failing factory struts. It suits commuters, fleet operators, hobby mechanics and home aquarists alike—anyone who values a compact, tool-free prop that fits a variety of applications and keeps hands free for the job.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this rod fit my car hood?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it adjusts from 16.95\" to 40.15\" to fit most passenger cars, trucks and SUVs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install the support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No tools required; expand to length, set the end tips, and it holds the lid securely.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55161617973591,"sku":"B0F6Y845DT","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-front-packaging-rod.jpg?v=1790330299"},{"product_id":"arana-7-5-gas-strut-for-sentry-safe-replacement-7-5-inch-lid-support-with-mounting-spring-direct-fit-qap1be-qap1blx","title":"ARANA 7.5\" Gas Strut for Sentry Safe Replacement – 7.5-inch Lid Support with Mounting Spring, Direct-Fit QAP1BE\/QAP1BLX","description":"\u003cp\u003e\u003cstrong\u003eARANA 7.5 inch gas strut replaces worn Sentry Safe lid supports to restore controlled opening and secure closure.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a direct replacement for common Sentry Safe models, this 7.5\" gas spring delivers reliable lift and damping for heavy safe lids. The kit includes one gas strut and one mounting spring, and it matches interchange numbers QAP1BE and QAP1BLX. Built for straightforward swaps, the part is sized and rated to match original performance so lids open smoothly and stay where you set them.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm this strut fits my Sentry Safe?\u003c\/h3\u003e\n\n\u003cp\u003eVerify fit by comparing the interchange number stamped on your existing strut and measuring the extended or compressed length. The ARANA unit lists QAP1BE and QAP1BLX as compatible references; if your part shows one of these codes the replacement is likely correct. When in doubt, measure length and feel of force to ensure similar operation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCheck for interchange numbers QAP1BE or QAP1BLX on your old strut\u003c\/li\u003e\n  \u003cli\u003eMeasure the strut length when extended and note mounting ball end spacing\u003c\/li\u003e\n  \u003cli\u003eConfirm lid movement feels comparable to the original spring force\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and time are required to install the replacement gas spring?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is intentionally simple and needs only a flat-head screwdriver for most Sentry Safe lids. The design uses ball-socket attachments so you pop the worn strut off and press the new one onto the same mounting studs. Typical installs take about five minutes even for DIY beginners.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNo special tools required beyond a flat screwdriver\u003c\/li\u003e\n  \u003cli\u003eBall-socket fittings snap on for quick mounting\u003c\/li\u003e\n  \u003cli\u003eReplacement typically completed in under five minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat if the spring force feels too strong or too weak after installation?\u003c\/h3\u003e\n\n\u003cp\u003eGas springs have specific pressure ratings; a mismatch can make a lid open too quickly or hold too tightly. If the ARANA strut’s force doesn’t match your expectation, contact ARANA support for a replacement or guidance. The product comes with one-year support to address incorrect pressure or fit issues.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompare force rating of old and new parts before buying\u003c\/li\u003e\n  \u003cli\u003eContact ARANA within warranty if pressure is inappropriate\u003c\/li\u003e\n  \u003cli\u003eReplacement or troubleshooting help available within 24 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill installing this affect the safe’s security or warranty?\u003c\/h3\u003e\n\n\u003cp\u003eReplacing a worn gas strut with a correct-fit ARANA part restores the original lid operation without altering lock mechanisms. The strut is a mechanical accessory and does not change electronic or locking components. For warranty concerns, consult your safe manufacturer’s policy regarding third-party replacement parts.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRestores controlled lid movement without altering locks\u003c\/li\u003e\n  \u003cli\u003eDesigned as a compatible mechanical replacement, not an electronic part\u003c\/li\u003e\n  \u003cli\u003eCheck Sentry Safe warranty terms for third-party part guidelines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ARANA 7.5 inch gas strut is intended for Sentry Safe owners who need a quick, reliable replacement for a sagging or failed lid support. It’s a practical option for homeowners, office managers, and service technicians who want a like-for-like swap with minimal tools and fast results. Ideal when you need smooth lid operation restored without professional service.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this ARANA gas strut match Sentry Safe part QAP1BE?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the ARANA 7.5\" gas strut lists QAP1BE and QAP1BLX as interchange numbers for direct compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take and what tools are needed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installs take about five minutes and require only a flat-head screwdriver to snap the ball-socket ends on.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55161714835799,"sku":"B0F9PKMBCX","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-7-5-inch-gas-strut-front-view.jpg?v=1790331687"},{"product_id":"arana-10-inch-18-lb-gas-struts-for-truck-toolbox-cabinet-doors-2-pack-weatherproof-short-stroke","title":"ARANA 10-inch 18 lb Gas Struts for Truck Toolbox \u0026 Cabinet Doors, 2-Pack — Weatherproof Short-Stroke","description":"\u003cb\u003eARANA 10-inch 18 lb gas struts are a two-piece set of hydraulic lift supports designed to hold and smoothly raise lids, doors and hatches weighing about 13–23 lbs (80N) for truck toolboxes, cabinets and similar applications.\u003c\/b\u003e\n\n\u003cp\u003eThese compact gas springs deliver controlled lift and damped closing for small-to-medium lids and access panels. Each strut measures 9.65\" center-to-center when extended and 6.11\" when compressed, offering a short-stroke solution that replaces worn-out hinges, adds soft-opening functionality, and prevents slammed lids. The pack includes two struts plus four mounting brackets, and the steel construction with robust seals is built to tolerate outdoor exposure and frequent use.\u003c\/p\u003e\n\n\u003ch3\u003eHow much weight can these gas struts support?\u003c\/h3\u003e\n\u003cp\u003eEach ARANA strut supplies approximately 80 N (about 18 pounds) of force, which is tuned to steady lift and hold for lids in the 13–23 lb range. They are best used where the lid or door is balanced and the gas spring mounting geometry provides leverage. For uneven or very heavy lids, consider multiple struts or a higher-rated model.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated force: 80 N (~18 lb) per strut\u003c\/li\u003e\n  \u003cli\u003eRecommended lid weight: 13–23 lb for optimal operation\u003c\/li\u003e\n  \u003cli\u003ePack includes: 2 gas struts and 4 mounting brackets\u003c\/li\u003e\n  \u003cli\u003eShort-stroke design: 9.65\" extended, 6.11\" compressed (center-to-center)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat mounting and installation steps are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and requires only basic tools such as a screwdriver and simple measurements to place the supplied brackets. ARANA provides installation instructions in the package so most users can complete the job in about five minutes per strut with no special skills.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools needed: screwdriver and measuring tape\u003c\/li\u003e\n  \u003cli\u003eMounting parts included: 4 brackets for two struts\u003c\/li\u003e\n  \u003cli\u003eEstimated install time: ~5 minutes per strut for typical setups\u003c\/li\u003e\n  \u003cli\u003eTip: verify center-to-center positions before drilling or screwing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these gas springs weatherproof and durable?\u003c\/h3\u003e\n\u003cp\u003eThe ARANA struts use carbon steel components and a tight sealing design to resist moisture and contaminants. They are built for outdoor and marine-adjacent use, surviving rain, snow and cold, and are rated to endure more than 50,000 compression cycles for long-term reliability under regular use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: high-quality carbon steel construction\u003c\/li\u003e\n  \u003cli\u003eSeal design: tight sealing for weather resistance\u003c\/li\u003e\n  \u003cli\u003eLongevity: tested for over 50,000 cycles of compression and extension\u003c\/li\u003e\n  \u003cli\u003ePerformance: smooth extension and steady support over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich applications fit these 10\" gas struts?\u003c\/h3\u003e\n\u003cp\u003eThese struts are versatile and can be fitted to many light-to-medium DIY and OEM projects. Common uses include truck tool boxes, storage chests, cabinet doors, toy boxes, boat hatches and display tables where a compact, controlled lift is needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTruck toolbox lids and job boxes\u003c\/li\u003e\n  \u003cli\u003eCabinet doors, toy boxes, and storage chests\u003c\/li\u003e\n  \u003cli\u003eBoat hatches and small access panels (non-structural)\u003c\/li\u003e\n  \u003cli\u003eDIY builds: display tables, workboxes, and small lids\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? ARANA’s 10-inch 18 lb gas struts are aimed at DIYers, mechanics and small-vehicle owners who want an affordable, weather-resistant lift solution for medium-light lids and doors. If you need a compact gas spring with clear mounting dimensions, straightforward installation and enough force for 13–23 lb lids, this two-piece set provides a dependable upgrade to hinges and worn supports without complex fittings. If your lid is heavier, larger, or unbalanced, choose a higher-rated model or add additional struts for the correct lifting geometry.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts fit truck toolbox lids?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They work well on balanced toolbox lids weighing about 13–23 lbs when mounted with the included brackets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools are needed for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only basic tools like a screwdriver and measuring tape are required; instructions are included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55162485571927,"sku":"B0CGHJT6FL","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-front-packaging-10-inch-gas-struts.jpg?v=1790336608"},{"product_id":"arana-10-inch-gas-struts-10-lb-45n-2-pack-for-truck-toolbox-cabinet-lids-sealed-steel-soft-closing","title":"ARANA 10-inch Gas Struts 10 lb (45N) 2-Pack for Truck Toolbox \u0026 Cabinet Lids — Sealed Steel, Soft-Closing","description":"\u003cp\u003e\u003cstrong\u003eARANA 10-inch gas struts are a 2-piece set of 45N (≈10 lb) gas springs designed to hold, lift, and softly lower lids and doors on truck toolboxes, cabinets, and small hatches.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese compact gas struts provide controlled lifting and support for lids that weigh roughly 8–11 pounds. Each kit includes two gas struts plus four mounting hardware pieces, and the steel construction with sealed ends is built to resist weather and heavy use. They’re intended for DIY installs on storage boxes, boat hatches, display tops, and other light applications where consistent lift and damped closing are needed.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these gas struts make opening and closing easier?\u003c\/h3\u003e\n\u003cp\u003eThe struts offer assisted lift so lids open smoothly without sudden drops and close with damping to prevent slamming. Their 45N force provides enough push for light lids while reducing the effort required to lift and hold the lid open.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length (center-to-center): 9.69\" for adequate leverage and clearance\u003c\/li\u003e\n  \u003cli\u003eCompressed length (center-to-center): 6.49\" for compact mounting\u003c\/li\u003e\n  \u003cli\u003eRated push force: 10 lb (45N) suitable for 8–11 lb lids\u003c\/li\u003e\n  \u003cli\u003eTwo struts included for balanced support on larger lids\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these gas struts durable enough for outdoor or heavy-use environments?\u003c\/h3\u003e\n\u003cp\u003eYes — ARANA designs these struts with carbon steel bodies and tight sealing to keep moisture and debris out. The units are tested for longevity and handle temperature changes, making them dependable for truck toolboxes and similarly exposed locations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality carbon steel construction for strength\u003c\/li\u003e\n  \u003cli\u003eSealed design to resist rain, snow, and dust intrusion\u003c\/li\u003e\n  \u003cli\u003eTested for over 50,000 compression cycles for long-term use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation, and what hardware is included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and can usually be completed in about five minutes with a screwdriver and basic measurements. The package comes with two gas struts, four mounting hardware pieces, and step-by-step instructions to help DIYers mount them correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 2 gas struts and 4 mounting hardware pieces\u003c\/li\u003e\n  \u003cli\u003eNo special tools required — just a screwdriver and measuring tape\u003c\/li\u003e\n  \u003cli\u003eClear installation instructions included for quicker setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat applications work best with these 10 lb gas springs?\u003c\/h3\u003e\n\u003cp\u003eThese struts are ideal for light-duty lids and doors where steady support and soft closing are helpful. They suit many small projects and common vehicle or home uses where a modest lifting force is needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTruck toolbox lids and bed-mounted toolboxes\u003c\/li\u003e\n  \u003cli\u003eCabinet, toy box, job box, storage box lids, and display tables\u003c\/li\u003e\n  \u003cli\u003eBoat hatches and other small marine compartments (with sealed construction)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? ARANA’s 10\" 10 lb gas struts are for DIYers, tradespeople, and vehicle owners who need reliable, low-effort lid support for light compartments. If you maintain a truck toolbox, cabinet, or small hatch and want a durable, weather-resistant lift assist that’s easy to fit yourself, this 2-pack gives balanced support and long service life at an affordable price. For any post-purchase questions, ARANA provides 365-day after-sales support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What weight lid will these 10 lb gas struts support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They’re rated at 45N (≈10 lb) and best for lids weighing about 8–11 pounds for ideal lift and hold.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these gas struts come with mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the package includes two struts plus four mounting hardware pieces and installation instructions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55162485637463,"sku":"B07S6GFCXB","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-front-packaging-gas-struts.jpg?v=1790336606"},{"product_id":"arana-7-5-inch-10-lb-gas-struts-for-truck-tool-boxes-rv-cabinets-2-pcs-sealed-carbon-steel-weatherproof","title":"ARANA 7.5-inch 10 lb Gas Struts for Truck Tool Boxes \u0026 RV Cabinets — 2 Pcs, Sealed Carbon-Steel Weatherproof","description":"\u003cp\u003e\u003cstrong\u003eARANA 7.5-inch gas struts are a pair of 10 lb (45N) support shocks engineered to lift and hold lids on truck tool boxes, RV cabinets, hatches and other storage panels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two gas struts replace common OEM parts (SX075P10, CS750-10) and are built for everyday use in outdoor and mobile environments. With a 7.5\" extended center-to-center length and a 5.25\" compressed length, each cylinder is rated to support 5–15 lb lids, delivering reliable lift and controlled motion. The sealed carbon-steel construction is designed to stand up to weather, frequent opening cycles and range-of-motion needs for toolboxes, RV compartments, marine hatches and furniture lids.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know these will fit my truck toolbox or RV cabinet?\u003c\/h3\u003e\n\u003cp\u003eMeasure the distance between your existing ball-mount centers fully extended and fully compressed to compare with the ARANA dimensions. This kit matches common OEM lengths and ball-end fittings used by many toolbox and RV manufacturers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended center-to-center: 7.5 inches\u003c\/li\u003e\n  \u003cli\u003eCompressed center-to-center: 5.25 inches\u003c\/li\u003e\n  \u003cli\u003eBall-end diameter: 10 mm pre-attached\u003c\/li\u003e\n  \u003cli\u003eWorks as direct replacement for Weather Guard, Husky, Better Built, UWS, Delta and Dee Zee models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat weight lids are these 10 lb struts suitable for?\u003c\/h3\u003e\n\u003cp\u003eEach strut provides about 45N (listed as 10 lb) of push force and is intended for lids that weigh roughly between 5 and 15 pounds. They stabilize medium-light lids and prevent sudden drops while allowing smooth opening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for lighter tool box lids, RV cabinet doors and small hatches\u003c\/li\u003e\n  \u003cli\u003eNot recommended as sole support for very heavy metal lids without additional reinforcement\u003c\/li\u003e\n  \u003cli\u003eMultiple struts can be used for wider or heavier panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weatherproof are these gas struts?\u003c\/h3\u003e\n\u003cp\u003eARANA gas struts use carbon-steel bodies with a sealed design to limit water and dirt intrusion. They are tested for more than 50,000 cycles to ensure consistent extension and retraction through repeated use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarbon-steel construction resists impact and wear\u003c\/li\u003e\n  \u003cli\u003eSealed cylinder protects the gas charge from moisture and debris\u003c\/li\u003e\n  \u003cli\u003eDesigned for outdoor exposure—rain, snow and cold conditions tolerated\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how hard is installation?\u003c\/h3\u003e\n\u003cp\u003eThe set includes two pre-fitted gas struts with 10mm ball ends plus an instruction guide and an after-sales contact card. Installation is a straightforward DIY job if you have basic tools and access to existing mounting points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 2 gas struts, instruction guide, customer support card\u003c\/li\u003e\n  \u003cli\u003eMounting hardware (brackets\/screws) not included—reuse original fittings or buy replacements\u003c\/li\u003e\n  \u003cli\u003eTypical tools required: screwdriver, measuring tape, possibly a socket or wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a pickup with an aftermarket tool box, maintain an RV or boat, or build cabinets and storage lids that need consistent, weather-resistant support, these ARANA gas struts are a practical, cost-effective replacement. They suit homeowners, contractors, fleet technicians and DIYers who need dependable lift assistance for medium-light lids without a complicated installation. For heavier applications or specialized mounts, consider higher-force struts or consult a technician to confirm proper fit and safe mounting practices.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are mounting brackets included with these gas struts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The package includes two struts with 10mm ball ends and instructions; mounting brackets and screws must be reused or purchased separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these struts handle heavy steel toolbox lids?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They’re rated for lids around 5–15 lb. For heavier steel lids, use higher-force struts or multiple units and verify mount strength.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55162678313303,"sku":"B0D4Q5PY84","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-front-view-toolbox-struts.jpg?v=1790337885"},{"product_id":"arana-10mm-ball-stud-mounting-brackets-4-pack-with-20-screws-galvanized-l-brackets-for-gas-struts-200-lb","title":"ARANA 10mm Ball Stud Mounting Brackets — 4-Pack with 20 Screws, Galvanized L-Brackets for Gas Struts (200 lb)","description":"\u003cp\u003e\u003cstrong\u003eARANA 10mm Ball Stud Mounting Brackets are a galvanized steel L-shaped mounting kit—four 10mm ball brackets plus 20 screws—designed to attach 10mm-ball gas struts to lids, doors or covers quickly and securely.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese brackets let you mount 10mm ball-end gas springs from ARANA and most other brands, offering a compact, corrosion-resistant anchor point for lift supports used on cabinets, trunks, toolboxes and DIY projects. The package includes four L-shaped brackets and twenty self-tapping screws, and the brackets are galvanized to resist rust and handle gas springs rated up to 200 lb. They suit both metal and many wood mounting surfaces and are intended for straightforward installation by hobbyists and professionals alike.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these ARANA brackets fit a gas strut?\u003c\/h3\u003e\n\n\u003cp\u003eEach bracket is built for 10mm ball studs, the common connection size for many gas springs. The L-shaped profile gives a stable mating surface for the ball socket on the strut end, keeping the strut aligned and reducing side loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits ARANA 10mm ball-end lift supports and most other 10mm ball struts\u003c\/li\u003e\n  \u003cli\u003eL-shaped design positions the ball stud for lid\/cover mounting\u003c\/li\u003e\n  \u003cli\u003eGalvanized steel construction prevents corrosion at the joint\u003c\/li\u003e\n  \u003cli\u003eCompatible with both nylon- and carbon-steel-headed gas struts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the ARANA 10mm bracket kit and what tools are needed?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit contains 4 L-shaped ball stud brackets and 20 screws—enough fasteners for secure installation and spare screws for multiple surfaces. Basic tools such as a drill or screwdriver and a measuring tape are all you need; no special welding or machining required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4 galvanized L-shaped 10mm ball stud brackets\u003c\/li\u003e\n  \u003cli\u003e20 screws sized for typical wood or metal panels\u003c\/li\u003e\n  \u003cli\u003eInstallation requires a drill\/screwdriver, pencil and measuring tape\u003c\/li\u003e\n  \u003cli\u003eApproximate install time: about five minutes per bracket for most users\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow strong and durable are these mounting brackets?\u003c\/h3\u003e\n\n\u003cp\u003eManufactured from galvanized steel, the ARANA brackets are corrosion resistant and engineered to withstand the loads generated by gas springs up to about 200 lb. The hardened finish and sturdy geometry reduce wear where the ball socket pivots, keeping the connection reliable over repeated cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGalvanized coating resists rust in indoor and covered outdoor settings\u003c\/li\u003e\n  \u003cli\u003eSteel construction supports gas springs up to 200 lb load rating\u003c\/li\u003e\n  \u003cli\u003eRobust L-shape minimizes bending or deformation under strain\u003c\/li\u003e\n  \u003cli\u003eSupplied screws ensure a firm mechanical attachment to most substrates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use these brackets for automotive and DIY projects?\u003c\/h3\u003e\n\n\u003cp\u003eYes—ARANA’s 10mm ball stud brackets are suitable for automotive hatches, truck toolboxes, camper cabinets, furniture lids and a wide range of DIY applications. Their compact footprint and included screws make them convenient for retrofits, repairs and new builds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommonly used on car trunks, hatchbacks and RV cabinets\u003c\/li\u003e\n  \u003cli\u003eWorks well for workshop chests, storage boxes and furniture lids\u003c\/li\u003e\n  \u003cli\u003eSmall size fits tight installation locations where clearance is limited\u003c\/li\u003e\n  \u003cli\u003ePackage supports multiple bracket placements or spare parts inventory\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This ARANA bracket kit is made for DIYers, mechanics and furniture makers who need a reliable, economical way to mount 10mm ball-end gas struts. If you’re replacing worn brackets, fitting new lift supports to lids or assembling a project that requires compact, rust-resistant mounting points, this 4-piece kit with 20 screws gives the parts and hardware to complete the job quickly and securely—backed by ARANA’s 365-day support for product or installation questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these brackets compatible with non-ARANA gas struts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They fit most 10mm ball-end gas struts from other brands if the strut uses a 10mm ball connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the brackets resist rust for outdoor use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The brackets are galvanized for corrosion resistance, suitable for covered outdoor or indoor use but not recommended for constant immersion.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55162707280215,"sku":"B08B4QG5DK","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-front-packaging-mounting-kit.jpg?v=1790338177"},{"product_id":"arana-liftgate-struts-for-gmc-acadia-2007-2016-2-pack-high-carbon-steel-all-weather-durability","title":"ARANA Liftgate Struts for GMC Acadia 2007-2016, 2-Pack — High-Carbon Steel, All-Weather Durability","description":"\u003cp\u003e\u003cstrong\u003eRobust, ready-to-install liftgate struts designed specifically to replace worn or failing rear hatch supports on GMC Acadia models from 2007 through 2016.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Acadia’s liftgate no longer holds open, is slow to rise, or drops unexpectedly, these ARANA replacement gas struts restore smooth, controlled hatch operation without the dealer price. Engineered from high-carbon Grade 45 steel with multi-layer chrome plating and wear-resistant hydraulic fluid, the pair delivers long service life and all-weather reliability for Base, Denali, SL, SLE, SLT and the 2015–2016 SLT1\/SLT2 variants when matched to the OEM numbers listed.\u003c\/p\u003e\n\n\u003ch3\u003eWill these struts fit my GMC Acadia?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on matching the OEM part number and your vehicle year\/trim. ARANA supplies the struts to replace a range of factory part numbers—confirm yours against the list to ensure correct fit and operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaceable OEM numbers: 20782756, 22918204, 22918205, 84050727, 84298332, 84298333, 20762755, 20782755.\u003c\/li\u003e\n  \u003cli\u003eFits GMC Acadia models from 2007–2016, including Base, Denali, SL, SLE, SLT and 2015–2016 SLT1\/SLT2 when numbers match.\u003c\/li\u003e\n  \u003cli\u003eMeasure length and end-fit style if uncertain; compare with your old struts before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these ARANA liftgate struts in extreme weather?\u003c\/h3\u003e\n\u003cp\u003eThese struts are built for wide temperature ranges and frequent cycles. Industrial 45# high-carbon steel, mirror chrome plating and premium hydraulic fluid help resist rust, pressure loss and wear even in very hot or cold climates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperates reliably in temperatures from −40°F to 110°F.\u003c\/li\u003e\n  \u003cli\u003eMulti-layer chrome plating reduces corrosion and surface wear.\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand 50,000+ compression cycles without noticeable force loss.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is the installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is quick and straightforward for most DIYers—no specialty tools or pro service required. ARANA designed the replacement struts for fast swap-out using basic tools, saving dealer fees and downtime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical installation time: about 5 minutes for both struts.\u003c\/li\u003e\n  \u003cli\u003eOnly a screwdriver (or standard ratchet set for some clips) is usually required.\u003c\/li\u003e\n  \u003cli\u003eIncludes standard ball-socket ends that snap onto factory mounting points.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance can I expect compared to OEM parts?\u003c\/h3\u003e\n\u003cp\u003eThese ARANA struts aim to match or exceed the functional life of many factory units at a much lower cost. Their materials and hydraulic fill are chosen to reduce leaks and maintain consistent lift pressure through heavy use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to resist leakage and pressure loss better than ordinary aftermarket struts.\u003c\/li\u003e\n  \u003cli\u003eIntended lifespan exceeds typical replacement intervals—fewer repeat purchases.\u003c\/li\u003e\n  \u003cli\u003eSold as a two-piece kit so both sides work evenly after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own a 2007–2016 GMC Acadia and need an affordable, durable replacement for weakened or failed liftgate supports. It’s especially useful if you want to avoid dealer markups, prefer a fast DIY swap, or need components that tolerate wide temperature swings and heavy daily use. Verify your original part number against the provided list to confirm fit before purchase; contact ARANA’s support within 365 days if you encounter issues after installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts fit my Acadia model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your vehicle’s OEM part number against the list provided; if it matches one of the listed numbers, the struts will fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installations take about five minutes for both struts using a screwdriver or basic hand tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55163632484695,"sku":"B0DNQCB9M8","price":34.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-acadia-liftgate-struts-front-view.jpg?v=1790346184"},{"product_id":"arana-quick-lift-hood-struts-for-toyota-camry-2007-2011-2-pack-oem-fit-high-carbon-steel","title":"ARANA Quick Lift Bonnet Struts for Toyota Camry 2007–2011, 2-Pack — OEM Fit, High-Carbon Steel","description":"\u003cp\u003e\u003cstrong\u003eThese two ARANA Quick Lift hood struts replace worn factory supports on 2007–2011 Toyota Camry models, restoring effortless, secure hood opening and holding power.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Camry’s hood sags, drops, or requires a rod to stay open, this pair of OEM-fit gas struts offers an affordable, durable alternative to dealer parts. Engineered for a direct fit with the listed part numbers, the ARANA struts are built from Grade 45 high-carbon steel with multi-layer chrome plating and premium hydraulic fluid to resist leaks, rust, and pressure loss across extreme temperatures.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these struts improve everyday hood use?\u003c\/h3\u003e\n\u003cp\u003eReplacing factory struts with ARANA Quick Lift units brings back smooth, single-handed hood operation and reliable hold while you work. You’ll avoid sudden drops and the need for a prop rod.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores consistent lift and damped closure\u003c\/li\u003e\n  \u003cli\u003ePrevents sudden hood slams during maintenance\u003c\/li\u003e\n  \u003cli\u003eSaves time with easy one-person operation\u003c\/li\u003e\n  \u003cli\u003ePairs sold to replace both sides at once for balanced performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my Camry and match OEM specifications?\u003c\/h3\u003e\n\u003cp\u003eARANA designed these struts for a direct OEM-style fit across 2007–2011 Toyota Camry trims. They correspond to multiple original part numbers, but you should confirm compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Camry Base, CE, Hybrid, LE, and SE sedans (2007–2011)\u003c\/li\u003e\n  \u003cli\u003eCross-references OEM part numbers like 5345006040 and 5344006050B\u003c\/li\u003e\n  \u003cli\u003eDirect-fit endpoints and mounting style for factory brackets\u003c\/li\u003e\n  \u003cli\u003eCheck your vehicle’s existing part number to ensure match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant are these replacement gas struts?\u003c\/h3\u003e\n\u003cp\u003eBuilt for long life, the ARANA struts use industrial-grade materials and wear-resistant hydraulic oil to maintain performance through temperature extremes and repeated cycles. The construction reduces corrosion and leakage risk over thousands of uses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGrade 45 high-carbon steel body with mirror chrome plating\u003c\/li\u003e\n  \u003cli\u003ePremium anti-wear hydraulic fluid resists pressure loss and leaks\u003c\/li\u003e\n  \u003cli\u003eRated to perform from −40°F to 110°F without major performance loss\u003c\/li\u003e\n  \u003cli\u003eEngineered to endure 50,000+ compression cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what support is available?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and can usually be completed in about five minutes with basic tools—no mechanic required. ARANA includes a 365-day support promise if issues arise after delivery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick swap using a screwdriver or simple hand tools\u003c\/li\u003e\n  \u003cli\u003eNo specialty tools or professional labor needed\u003c\/li\u003e\n  \u003cli\u003e365-day customer care for post-purchase questions\u003c\/li\u003e\n  \u003cli\u003eCost-effective alternative to dealer replacement pricing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: Drivers of 2007–2011 Toyota Camry sedans—especially those who want a budget-friendly, long-lasting hood strut replacement without dealer markups. It’s ideal for DIYers replacing both hood supports at once, owners in areas with hot summers or cold winters who need weather-resistant performance, and anyone who wants to restore safe, effortless hood operation without complicated installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these ARANA struts fit all 2007–2011 Camry trims?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit Base, CE, Hybrid, LE, and SE sedans in that model range; verify your existing strut’s part number against the listed OEM references before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take and what tools are needed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Installation usually takes about five minutes per strut using a screwdriver or basic hand tools; no professional mechanic required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55163724595543,"sku":"B077845DX6","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-hood-struts-front-packaging.jpg?v=1790346872"},{"product_id":"arana-rear-hatch-struts-for-chevy-trailblazer-gmc-envoy-2002-2009-2-pack-heavy-duty-gas-springs-direct-fit","title":"ARANA Rear Hatch Struts for Chevy Trailblazer \u0026 GMC Envoy 2002-2009 — 2-Pack Heavy-Duty Gas Springs, Direct-Fit","description":"\u003cp\u003e\u003cstrong\u003eARANA rear hatch struts are a direct-fit, heavy-duty replacement set that restores smooth, reliable lift and hold for 2002–2009 Chevrolet Trailblazer and GMC Envoy rear tails.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your liftgate sags, closes unexpectedly, or feels weak, these replacement gas springs are engineered as an affordable OEM-style solution. Made for late-model mid-size SUVs and closely matching original part dimensions, the kit arrives as two ready-to-install struts that revive factory operation without special tools or garage time.\u003c\/p\u003e\n\n\u003ch3\u003eWill these struts fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThey are designed to match the fit and function of the factory hatch supports used on 2002–2009 Chevy Trailblazer and GMC Envoy models (also compatible with related makes listed by OEM cross-reference). Check the original part number before ordering to prevent fitment issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm compatibility using OEM numbers: 014293, 0317SS, 15068721\/22, 15079252\/53, 15120902\/03, 16068721, 3113PX.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with EXT or XL extended-length liftgates—measure if unsure.\u003c\/li\u003e\n  \u003cli\u003eShips as a pair: left and right rear hatch struts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are ARANA hatch supports in real-world conditions?\u003c\/h3\u003e\n\u003cp\u003eThese struts are built for long service life and stable performance in a wide range of climates. High-carbon steel construction, multi-layer chrome plating, and wear-resistant hydraulic fluid help them resist corrosion, leaks, and pressure loss across seasonal extremes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGrade 45 high-carbon steel body with mirror chrome finish for rust resistance.\u003c\/li\u003e\n  \u003cli\u003eHydraulic oil formulated to maintain pressure from -40°F to 110°F.\u003c\/li\u003e\n  \u003cli\u003eRated to exceed 50,000 compression cycles for extended reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre they easy to install, or do I need a mechanic?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and can be completed in about five minutes with common hand tools. The struts use standard ball-stud end fittings so you can pop the old supports off and press the new ones into place without disassembling trim or wiring.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo special tools required—screwdriver or small pry tool recommended.\u003c\/li\u003e\n  \u003cli\u003eQuick, dealer-free replacement saves on labor costs and downtime.\u003c\/li\u003e\n  \u003cli\u003eIncludes clear installation guidance; professional help optional.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance or warranty support comes with the product?\u003c\/h3\u003e\n\u003cp\u003eARANA backs this pair of hatch struts with responsive customer care and a 365-day service promise. While gas springs are essentially maintenance-free, the warranty covers defects and early failures so you can replace with confidence.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-year worry-free support from ARANA customer service.\u003c\/li\u003e\n  \u003cli\u003eInspect mounting studs and surrounding hardware during replacement for best results.\u003c\/li\u003e\n  \u003cli\u003eIf fit or function problems occur, contact ARANA for assistance or replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: drivers and DIYers who own a 2002–2009 Chevy Trailblazer, GMC Envoy, or similarly equipped siblings and want a cost-effective, long-lasting solution to sagging or weak liftgate performance. These struts suit owners who prefer quick self-service over dealer visits, need weatherproof reliability across hot or cold climates, and want parts that match OEM specifications and numbers for a correct fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts fit the extended-length (EXT\/XL) hatch?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This two-piece set is for standard-length rear hatches only and does not fit EXT or XL extended models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take and what tools are needed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Installation typically takes about five minutes using a screwdriver or small pry tool; no professional mechanic required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55163724726615,"sku":"B00UL3ET4E","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-rear-hatch-strut-front-packaging.jpg?v=1790346872"},{"product_id":"arana-tailgate-assist-shock-for-ford-f-150-2015-2026-soft-open-dampener-bolt-on-fit","title":"ARANA Tailgate Assist Shock for Ford F-150 2015-2026 — Soft‑Open Dampener, Bolt‑On Fit","description":"\u003cp\u003e\u003cstrong\u003eARANA Tailgate Assist Shock is a bolt-on dampener that replaces or augments the Ford F-150 tailgate hardware so the heavy tailgate lowers slowly and safely.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you own a 2015–2026 Ford F-150 (XL, XLT, Lariat, King Ranch), this ARANA Tailgate Assist Shock provides a controlled, soft-open action that prevents the tailgate from slamming down. Designed to match the tailgate geometry and to install with OEM hardware, the kit is an affordable way to upgrade an abrupt or noisy tailgate into a smooth, confidence-inspiring system without drilling or permanent modification.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the ARANA Tailgate Assist improve tailgate operation?\u003c\/h3\u003e\n\u003cp\u003eThe ARANA shock uses a calibrated dampener to slow the tailgate during its descent so it doesn’t free-fall or slam. It gives a consistent, linear resistance throughout the drop, making opening safer and easier, especially when your hands are full.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces tailgate drop speed for safer loading and unloading\u003c\/li\u003e\n  \u003cli\u003eCreates consistent, smooth movement across the full travel\u003c\/li\u003e\n  \u003cli\u003eMinimizes noise and impact on the tailgate latch and cables\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my Ford F-150 model and how does it mount?\u003c\/h3\u003e\n\u003cp\u003eARANA Tailgate Assist is molded and shaped specifically for 2015–2026 Ford F-150 XL, XLT, Lariat and King Ranch models and mounts using the truck’s factory bolt points. No drilling or body modifications are required when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 2015–2026 F-150 bed tailgates and OEM bolt locations\u003c\/li\u003e\n  \u003cli\u003eUses existing mounting points and bolts, preserving paint and finish\u003c\/li\u003e\n  \u003cli\u003eMounts align with tailgate contours for a factory-like fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does installation take and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eMost owners complete the install in about 10 minutes with the included hardware and basic hand tools. The kit comes with what you need, though the driver-side bottle opener must be removed to access the mounting area.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEstimated install time: roughly 10 minutes\u003c\/li\u003e\n  \u003cli\u003eIncludes mounting hardware and straightforward instructions\u003c\/li\u003e\n  \u003cli\u003eTip: remove driver-side bottle opener as directed for access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kind of support and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eARANA backs the Tailgate Assist Shock with a 365-day support promise from the date of purchase, meaning the brand will help troubleshoot or replace components if problems arise. The dampener is built to handle the weight and frequent use typical of full-size truck tailgates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e365 days of ARANA customer support after purchase\u003c\/li\u003e\n  \u003cli\u003eRobust dampener design for repeated opening cycles\u003c\/li\u003e\n  \u003cli\u003eEngineered to reduce impact on latch and cables, extending hardware life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The ARANA Tailgate Assist Shock is aimed at Ford F-150 owners (2015–2026 XL, XLT, Lariat, King Ranch) who want a quick, non-invasive upgrade to reduce tailgate slamming, improve safety while loading, and add a more refined feel to daily use. It’s useful for drivers who haul cargo frequently, families that want quieter tailgate operation, and anyone who prefers a simple DIY install without altering the truck’s finish.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this require drilling into my F-150?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. ARANA mounts to existing OEM bolt points and requires no drilling or paint damage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typical install time is about 10 minutes using the included hardware and basic tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55163730362711,"sku":"B0D2HZ4X11","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-tailgate-assist-front-mounted.jpg?v=1790346915"},{"product_id":"arana-hood-struts-for-hyundai-sonata-2015-2017-2-piece-oem-fit-quick-lift-durable","title":"ARANA Bonnet Struts for Hyundai Sonata 2015–2017 — 2‑Piece OEM Fit Quick Lift, Durable","description":"\u003cp\u003e\u003cstrong\u003eThese ARANA Quick Lift hood struts replace factory supports on Hyundai Sonata models (2015–2017) to restore effortless hood opening and secure hold.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Sonata's hood no longer stays open or feels heavy to lift, this 2-piece ARANA strut set provides a direct-fit, budget-friendly replacement built to match the original mounting and performance. Designed for Eco\/GL\/GLS (2015–2016) and Limited (2015–2017), the pair installs in minutes and uses rugged materials and sealed hydraulic fluid to resist temperature extremes and wear.\u003c\/p\u003e\n\n\u003ch3\u003eWill these struts fit my 2015–2017 Hyundai Sonata?\u003c\/h3\u003e\n\u003cp\u003eYes — the ARANA Quick Lift set is made for the noted Sonata trims and mirrors OEM geometry so it mounts without modifications. Still, confirm compatibility by checking your existing part numbers to avoid mismatches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible trims: 2015–2016 Eco\/GL\/GLS and 2015–2017 Limited\u003c\/li\u003e\n  \u003cli\u003eCross-check OEM numbers: 371418, 81161C1000, 81171C1000, 941221, PM3570, 5B941221, 5B-941221\u003c\/li\u003e\n  \u003cli\u003eDirect-fit replacement — no drilling or special brackets needed\u003c\/li\u003e\n  \u003cli\u003eSold as a 2-piece set for both sides of the hood\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these struts in real-world conditions?\u003c\/h3\u003e\n\u003cp\u003eConstructed from high-carbon Grade 45 steel with multiple chrome layers and anti-wear hydraulic fluid, the ARANA struts are built to withstand thousands of cycles and harsh climates. They resist corrosion and maintain internal pressure better than basic replacements, so lifting performance stays consistent over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: industrial 45# high-carbon steel with multi-layer chrome plating\u003c\/li\u003e\n  \u003cli\u003eHydraulic oil sealed to reduce leaks and pressure loss\u003c\/li\u003e\n  \u003cli\u003eTemperature rating: reliable from -40°F to 110°F\u003c\/li\u003e\n  \u003cli\u003eEngineered for 50,000+ compression cycles for lasting service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation — can I do it myself?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed for quick DIY replacement with common hand tools; most users finish in about five minutes per side. The struts use the same ball-stud fittings as the original, so you remove the old units and snap the ARANA replacements into place without specialist tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical tools: flathead screwdriver or small pry tool\u003c\/li\u003e\n  \u003cli\u003eInstallation time: approximately 5 minutes per side\u003c\/li\u003e\n  \u003cli\u003eNo professional mechanic required — suitable for at-home replacement\u003c\/li\u003e\n  \u003cli\u003eIncludes OEM-compatible mounting ends for straightforward swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and after-sale support does ARANA provide?\u003c\/h3\u003e\n\u003cp\u003eARANA backs these struts with a 365-day support policy to address delivery or performance issues. Customer service can help with fit checks, troubleshooting, and post-purchase concerns so you get the right part and dependable operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e365-day support for post-sale questions and issues\u003c\/li\u003e\n  \u003cli\u003eAssistance verifying OEM part number compatibility\u003c\/li\u003e\n  \u003cli\u003eReturns and replacements handled through ARANA support\u003c\/li\u003e\n  \u003cli\u003eDocumentation and installation tips available on request\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a 2015–2017 Hyundai Sonata and want an affordable, high-strength replacement that restores smooth hood lift and safe holding without dealer prices, this ARANA Quick Lift 2-pack is aimed at DIY owners, independent shops, and anyone seeking reliable, weather-resistant supports that match OEM fit and mount points.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts match Hyundai original parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are OEM-fit replacements compatible with listed Hyundai Sonata models; verify by matching your existing part number with the provided cross-references.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long will the ARANA hood struts last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Built for longevity with high-carbon steel and sealed hydraulics, they are rated for 50,000+ cycles under normal conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55163735343447,"sku":"B0D7VQNGBF","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-front-packaging-hood-struts.jpg?v=1790346938"},{"product_id":"arana-hood-struts-for-ford-f-250-f-350-f-450-f-550-1999-2007-2-piece-heavy-duty-gas-lift-corrosion-resistant","title":"ARANA Bonnet Struts for Ford F-250\/F-350\/F-450\/F-550 1999-2007 — 2-Piece Heavy-Duty Gas Lift, Corrosion-Resistant","description":"\u003cb\u003eARANA Hood Struts are a pair of heavy-duty gas lift supports engineered to replace the hood\/bonnet lift struts on 1999–2007 Ford F-250, F-350, F-450 and F-550 Super Duty trucks.\u003c\/b\u003e\n\n\u003cp\u003eIf your Super Duty hood no longer holds open or drops unexpectedly, these two replacement hood struts restore smooth, controlled lifting and secure support. Designed as a wallet-friendly alternative to dealer parts, the ARANA kit aims to match factory fit and function while offering enhanced corrosion resistance and extended life. The set includes two matched struts, ready to install in minutes with basic tools.\u003c\/p\u003e\n\n\u003ch3\u003eWill these struts fit my Ford Super Duty from 1999–2007?\u003c\/h3\u003e\n\u003cp\u003eThese gas supports are made to match the mounting points and stroke length used on late‑90s and early‑2000s Ford Super Duty models. Before ordering, compare your OEM part number to one of the compatible numbers listed to ensure a direct match and avoid returns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible model years: 1999–2007 F-250, F-350, F-450, F-550 Super Duty\u003c\/li\u003e\n  \u003cli\u003eCommon OEM reference numbers included for cross-checking: 4339, 95892, 013661, 028381\u003c\/li\u003e\n  \u003cli\u003eAlso cross-references: 2421VR, 2922MN, 5C3416C827AA, F81Z16C826AA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these ARANA hood struts in varied weather?\u003c\/h3\u003e\n\u003cp\u003eARANA built these supports to withstand extreme temperatures and resist the common failure modes of budget struts. Multi-layer chrome plating and quality hydraulic fluid reduce wear, while carbon steel construction limits bending or breakage under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for reliable operation from around −40°F to 110°F\u003c\/li\u003e\n  \u003cli\u003eMirror chrome finish reduces corrosion and improves sliding action\u003c\/li\u003e\n  \u003cli\u003eEngineered to resist leaks and maintain pressure over long use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eReplacement is straightforward and designed for a home mechanic. Most installations use only a screwdriver or small socket; many customers report completing both sides in under 10 minutes without removing the hood.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple pop-off ball-socket ends — no special tools required\u003c\/li\u003e\n  \u003cli\u003eTwo-person assist recommended for safety when removing old struts\u003c\/li\u003e\n  \u003cli\u003eTypical install time: about 5–15 minutes for both sides\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long can I expect these struts to last compared to stock parts?\u003c\/h3\u003e\n\u003cp\u003eThese ARANA struts use industrial-grade materials intended to extend service life beyond typical value replacements. The design emphasizes longevity through thicker steel, extra chrome layers and anti-wear hydraulic fluid to reduce early failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed from Grade 45 high‑carbon steel for strength\u003c\/li\u003e\n  \u003cli\u003eMulti-layer chrome plating to slow rust and surface wear\u003c\/li\u003e\n  \u003cli\u003eEngineered for tens of thousands of compression cycles before noticeable force loss\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This 2‑piece ARANA hood strut set is for Ford Super Duty owners who need a dependable, affordable replacement for worn or leaking hood supports. It’s a good pick for DIYers who want an OEM-compatible fit without dealer markup, fleet owners keeping older trucks in service, and anyone who wants a long-lasting, weather-resistant solution that installs quickly at home.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts match factory mounting points?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are made to fit the factory mounting points for 1999–2007 Ford Super Duty models; verify with OEM numbers before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most users install both struts in 5–15 minutes using a screwdriver or small socket; a helper is recommended for safety.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55163749663063,"sku":"B0DDSW7DQW","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-hood-struts-front-pair_acfb4b3f-4455-4d34-8762-5a23b4db71b4.jpg?v=1790347066"},{"product_id":"arana-12-2-gas-struts-for-truck-cap-window-24-lb-lift-2-piece-set","title":"ARANA 12.2\" Gas Struts for Truck Cap Window - 24 lb Lift, 2-Piece Set","description":"\u003cstrong\u003eARANA C16-03795 are 12.2\" extended, 24 lb lift gas struts sold as a pair to replace or upgrade truck cap, topper and hatch window supports.\u003c\/strong\u003e\n\n\u003cp\u003eIf your truck cap window, toolbox lid or topper hatch needs reliable lift assistance, these ARANA gas springs provide controlled opening and holding power for light-duty applications. Designed to match common interchange numbers, this 2-piece kit delivers 24 pounds (≈107 N) of force per strut and fits many utility topper and canopy installations when the lengths align.\u003c\/p\u003e\n\n\u003ch3\u003eWill these struts fit my truck cap or topper?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on both the interchange number and the measured length. ARANA lists C16-03795 (also referenced as C1603795, C16-25685, C1625685) as the matching part number set; confirming your old struts’ interchange ID and comparing compressed\/extended lengths avoids incorrect purchases.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length (A): 12.2 in (310 mm).\u003c\/li\u003e\n  \u003cli\u003eCompressed length (B): 8.26 in (211 mm).\u003c\/li\u003e\n  \u003cli\u003eForce per strut: 24 lb (≈107 N); sold as a pair.\u003c\/li\u003e\n  \u003cli\u003eCheck your existing part numbers and measure before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much weight can these 12\" gas supports handle?\u003c\/h3\u003e\n\u003cp\u003eThese 24 lb struts are built for light-duty lids and windows. For DIY or replacement work, they perform best when the supported panel weighs roughly between 18 and 26 pounds, giving balanced lift and secure hold without overstressing the piston.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntended useful weight range: ~18–26 lb per supported panel.\u003c\/li\u003e\n  \u003cli\u003eEach strut supplies 24 lb of push force; two work together on most hatches.\u003c\/li\u003e\n  \u003cli\u003eNot recommended for heavy lids or commercial-duty applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and what should I check before fitting?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires matching the length and attachment style to your vehicle’s brackets. These gas springs must be able to compress fully after being mounted; verify mounting points and swivel ball sockets align with the strut ends and that the end fittings match your vehicle or bracket hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm interchange number and both compressed\/extended lengths prior to purchase.\u003c\/li\u003e\n  \u003cli\u003eEnsure ball-stud or bracket dimensions match your existing hardware.\u003c\/li\u003e\n  \u003cli\u003eMount so the piston rod points down when closed to prolong life.\u003c\/li\u003e\n  \u003cli\u003eIf unsure, consult ARANA support for installation guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do I get in the box and is support available?\u003c\/h3\u003e\n\u003cp\u003eThis listing includes two ARANA gas struts (not a single unit) sized to the specifications above. ARANA offers one-year support—reach out with fitment questions, installation help or any dissatisfaction so they can provide timely assistance or troubleshooting tips.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContents: 2 gas struts, each 12.2\" extended, 24 lb force.\u003c\/li\u003e\n  \u003cli\u003eCompatibility note included: intended for light-duty truck caps, toppers, canopies, and hatch windows.\u003c\/li\u003e\n  \u003cli\u003e365-day customer support directly from ARANA for fit and installation help.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? ARANA C16-03795 12\" 24 lb gas struts suit truck and topper owners seeking a direct replacement for worn or broken lift supports on truck cap windows, topper hatches, light tool box lids and similar light-duty panels. They are appropriate for DIY mechanics, fleet managers replacing multiple identical struts, and anyone who can confirm interchange numbers and mounting geometry before installation. If your panel weight and mounting style fall within the recommended ranges, these struts are a straightforward, economical swap to restore smooth opening and secure holding of your hatch or window.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these sold as a single strut or a pair?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This listing contains two gas struts — a matching pair for supporting one hatch or window together.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What if my old strut has a different part number?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Match your existing interchange number and measure lengths; contact ARANA support if numbers differ for compatibility help.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55163753726295,"sku":"B07C7RCV4W","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-c16-03795-front-view.jpg?v=1790347086"},{"product_id":"arana-15-gas-struts-for-truck-cap-24-lb-107-n-2-pack-oem-style-replacement-sealed-steel","title":"ARANA 15\" Gas Struts for Truck Cap 24 lb (107 N) — 2-Pack OEM-Style Replacement, Sealed Steel","description":"\u003cp\u003e\u003cstrong\u003eARANA C16-04154 are 15-inch gas struts that provide 24 lb (107 N) lift support for truck caps, camper shells, and toolbox lids — sold as a 2-pack replacement set.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese gas springs are designed as direct-fit replacements for many common truck toppers and camper shells, offering consistent lift force and a sealed steel cylinder for longer service life. They are made to match the dimensions and force rating of OEM-style struts so you can swap them into existing mounts without major modifications. Before ordering, check the original part number or measure the lid weight to confirm compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm these struts will fit my truck cap?\u003c\/h3\u003e\n\n\u003cp\u003eConfirm fit by matching the part number or measuring the extended and compressed hole-to-hole lengths on your old struts. The ARANA C16-04154 has defined measurements that will fit many A.R.E., LEER, SnugTop, and similar caps when the lid weight falls in the recommended range.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExtended length (hole to hole): 14.45 inches\u003c\/li\u003e\n  \u003cli\u003eCompressed length (hole to hole): 8.98 inches\u003c\/li\u003e\n  \u003cli\u003eRecommended lid weight: 20–26 lbs for proper balance\u003c\/li\u003e\n  \u003cli\u003eInterchange part numbers: C16-04154, C16 04154\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and construction features should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eThese shocks use a thickened steel cylinder and enhanced sealing materials to resist leaks and maintain pressure over time. The 24 lb force provides steady, controlled opening and closing for camper windows, truck caps, and tool box lids without abrupt motion.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRated force: 24 lbs (107 N) per strut\u003c\/li\u003e\n  \u003cli\u003eDurable sealing to reduce gas loss and extend life\u003c\/li\u003e\n  \u003cli\u003eReinforced steel body for improved impact resistance\u003c\/li\u003e\n  \u003cli\u003ePre-set force — no on-site adjustment required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the replacement process for these gas springs?\u003c\/h3\u003e\n\n\u003cp\u003eReplacing these gas struts is typically straightforward: remove the old unit from its ball sockets or brackets and snap the ARANA strut into place. No special tools are usually required for ball-end mounts, though retaining clips or socket pliers can help with tight connections.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRemoval: support the lid, remove retainers, detach old strut\u003c\/li\u003e\n  \u003cli\u003eInstallation: align ball sockets, press onto ball ends until secure\u003c\/li\u003e\n  \u003cli\u003eTime: most replacements take 10–30 minutes per strut\u003c\/li\u003e\n  \u003cli\u003eIf unsure, compare part numbers or consult a mechanic\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about warranties and support?\u003c\/h3\u003e\n\n\u003cp\u003eARANA provides a 365-day replacement support policy covering defects, missing parts, or incorrect orders. Keep your purchase details and photos of the item and packaging to speed up support resolution if anything is wrong.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e365 days replacement support from ARANA\u003c\/li\u003e\n  \u003cli\u003eContact ARANA with order number and issue description\u003c\/li\u003e\n  \u003cli\u003eInclude photos for faster verification and resolution\u003c\/li\u003e\n  \u003cli\u003eRefund or replacement options available depending on the case\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ARANA C16-04154 15-inch 24 lb gas struts are ideal for truck owners, RV and camper DIYers, and tradespeople who need reliable replacement lifts for camper shell windows, truck caps (A.R.E., LEER, SnugTop), and jobsite tool boxes. Choose these struts if your lid falls within the 20–26 lb range and you want a durable, OEM-style two-pack with clear dimensions and manufacturer support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these gas struts a direct replacement for A.R.E. and LEER caps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they match common OEM dimensions and part numbers like C16-04154, but confirm your hole-to-hole lengths before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What lid weight do these 24 lb struts support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are intended for lids weighing about 20–26 pounds for balanced opening and closing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55164065743191,"sku":"B07CGKD9XP","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-front-packaging-15-inch-struts.jpg?v=1790349623"},{"product_id":"arana-14-24-lb-gas-strut-pair-for-toolcart-lids-direct-fit-replacement-weather-resistant","title":"ARANA 14\" 24 lb Gas Strut Pair for Toolcart Lids — Direct-Fit Replacement, Weather-Resistant","description":"\u003cp\u003e\u003cstrong\u003eARANA 14-inch 24 lb gas strut pair (models C16-28554 \/ C16-33275) is a direct-fit replacement set that restores lift and controlled motion for toolcarts, hoods, and lids in minutes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf a worn or leaking strut leaves a toolcart lid sagging or hard to open, these two ARANA gas springs give you a quick, dependable fix. They’re sold as a pair, match common interchange numbers, and are engineered for long service life with weather-resistant finishes and high-grade hydraulic oil. The result: predictable lift force, smoother operation, and fewer returns or repeat repairs compared with lower-quality units.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these struts fit my toolcart or lid?\u003c\/h3\u003e\n\u003cp\u003eThese 14-inch struts are made to replace several OEM and aftermarket part numbers, so they often fit directly where the original parts did. Check the interchange list and measure extended\/retracted lengths to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 14 inches (extended specification matches listed replacements)\u003c\/li\u003e\n  \u003cli\u003eRated force: 24 pounds (approximate lift force)\u003c\/li\u003e\n  \u003cli\u003eCompatible numbers: C16-06389, C16-33275, C16-28554 and others listed\u003c\/li\u003e\n  \u003cli\u003eSold as a pair—both sides refreshed for even lifting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and time are needed to install these gas springs?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intentionally simple: no hydraulic press or specialty tools required. In most cases a single screwdriver and five minutes per strut are all that’s needed, so you can avoid dealer labor charges and get back to work quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical install time: about 5 minutes per strut\u003c\/li\u003e\n  \u003cli\u003eRequired tools: common screwdriver or small wrench for retaining clips\u003c\/li\u003e\n  \u003cli\u003eNo professional installation required—DIY friendly\u003c\/li\u003e\n  \u003cli\u003eIncludes standard ball-socket ends for easy snap-on mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these ARANA gas struts in extreme conditions?\u003c\/h3\u003e\n\u003cp\u003eARANA builds these struts from Grade 45 high-carbon steel, with multi-layer chrome plating and premium anti-wear hydraulic oil to resist corrosion and seal failure. They’re rated to perform across a wide temperature range and to survive heavy daily use without significant force loss.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperating range: -40°F to 110°F for reliable cold and heat performance\u003c\/li\u003e\n  \u003cli\u003eMaterial: 45# high-carbon steel with mirror chrome plating\u003c\/li\u003e\n  \u003cli\u003eTested cycles: designed to exceed 50,000 compressions without notable force loss\u003c\/li\u003e\n  \u003cli\u003eHydraulic oil: wear-resistant formula to minimize leaks and pressure loss\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat support and guarantees come with the purchase?\u003c\/h3\u003e\n\u003cp\u003eARANA offers a 365-day support period so you can reach out if anything goes wrong after delivery. The policy provides straightforward assistance and helps ensure the replacement process is hassle-free if fitment or performance questions arise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e365-day customer support for post-purchase issues\u003c\/li\u003e\n  \u003cli\u003eResponsive help for fitment and installation questions\u003c\/li\u003e\n  \u003cli\u003eClear interchange info to reduce returns and misorders\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These ARANA 14\" 24 lb gas struts are ideal for DIY mechanics, shop owners, and anyone repairing toolcarts, storage lids, or small vehicle hatches that use the listed interchange numbers. If you want a fast, affordable replacement that withstands temperature swings and repetitive use while avoiding dealer labor fees, this two-piece kit is a practical, long-lasting option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these ARANA struts a direct replacement for C16-33275?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These 14\" ARANA struts match interchange numbers including C16-33275 and are sold as a two-piece set for both sides.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools do I need to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typically only a screwdriver or small wrench is needed; most installs take about five minutes per strut.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55164188000599,"sku":"B078S5VNMT","price":31.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-front-packaging-14in-gas-struts.jpg?v=1790351214"},{"product_id":"arana-hood-struts-for-toyota-camry-2012-2017-avalon-2013-2018-2-pc-direct-fit-gas-lift-corrosion-resistant","title":"ARANA Bonnet Struts for Toyota Camry 2012–2017 \u0026 Avalon 2013–2018, 2‑Pc — Direct‑Fit Gas Lift, Corrosion‑Resistant","description":"\u003cp\u003e\u003cstrong\u003eARANA Hood Struts are a pair of direct-fit gas lift supports engineered to replace the factory hood struts on 2012–2017 Toyota Camry and 2013–2018 Toyota Avalon models, restoring smooth, reliable hood opening and secure hold.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle’s hood no longer stays up or opens with resistance, these replacement hood struts from ARANA are built to match the fit and function of the original equipment. They give your hood consistent lift, resist leakage and corrosion, and are designed to be a quick DIY swap so you avoid dealer markups. Materials, finishing and sealed hydraulic fluid are selected to handle extreme temperatures and repeated cycles for long-lasting performance.\u003c\/p\u003e\n\n\u003ch3\u003eWill these struts fit my Camry or Avalon?\u003c\/h3\u003e\n\u003cp\u003eThese ARANA struts are manufactured to fit the specified Toyota chassis and years without modification. Before purchasing, compare your current strut part numbers to confirm compatibility to avoid ordering the wrong item.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: Toyota Camry model years 2012–2017 (Base\/Hybrid\/L\/LE\/SE\/XLE\/XSE)\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Toyota Avalon model years 2013–2018\u003c\/li\u003e\n  \u003cli\u003eCheck: confirm OEM or stamped part numbers on your original strut for exact match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these replacement hood supports?\u003c\/h3\u003e\n\u003cp\u003eARANA builds these struts from high-carbon Grade 45 steel with multi-layer chrome plating and a wear-resistant hydraulic fill. The construction limits corrosion and wear so the struts tolerate frequent use and a wide range of climates without losing pressure quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: industrial-grade 45# high-carbon steel\u003c\/li\u003e\n  \u003cli\u003eFinish: multi-layer mirror chrome for rust protection\u003c\/li\u003e\n  \u003cli\u003eSealing: premium anti-wear hydraulic fluid to resist leaks and pressure loss\u003c\/li\u003e\n  \u003cli\u003eDurability: rated for tens of thousands of compression cycles for long service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow hard is installation and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and intended for home mechanics with basic tools. Most users can swap both struts in roughly five minutes using only a screwdriver or small wrench to release the ball-stud clips and fasteners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTime: typically a quick 5–10 minute replacement for both struts\u003c\/li\u003e\n  \u003cli\u003eTools: common screwdriver or small socket\/wrench set\u003c\/li\u003e\n  \u003cli\u003eSteps: prop hood, remove original clips, press new strut onto ball studs, verify smooth motion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat can I expect from ARANA after purchase?\u003c\/h3\u003e\n\u003cp\u003eARANA supports these struts with a one-year customer service period for post-delivery issues and assistance. If a defect or fitment question arises, the brand offers responsive support to help resolve the problem without involving dealer visits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupport: 365 days of post-purchase assistance\u003c\/li\u003e\n  \u003cli\u003eReturn\/help: contact ARANA customer care for fit or function guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? These ARANA hood struts are aimed at Toyota owners who want a cost-effective OEM-style replacement that restores safe hood operation without professional installation. Ideal for DIYers, budget-conscious drivers, and anyone replacing worn or leaking hood supports on the specified Camry and Avalon years. If you need the original fit, improved corrosion resistance and a fast home installation, this two-piece set is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these ARANA struts require modifications to fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No modifications are needed if your car matches the listed model years; they are direct-fit replacements for the specified Camry and Avalon models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation usually take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most users complete both struts in about 5–10 minutes with a screwdriver or small wrench.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55164229386583,"sku":"B0DDPDK1HS","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-hood-struts-front-view.jpg?v=1790351691"},{"product_id":"arana-tailgate-assist-soft-open-for-dodge-ram-1500-2500-3500-2009-2026-bolt-in-dampener-no-drill-install","title":"ARANA Tailgate Assist Soft Open for Dodge RAM 1500\/2500\/3500 (2009–2026) — bolt-in dampener, no-drill install","description":"\u003cp\u003e\u003cstrong\u003eARANA Tailgate Assist Soft Open is a bolt-in dampener kit that slows and smooths the heavy drop of Dodge RAM tailgates for model years 2009–2026.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your RAM’s tailgate drops fast and slams, this ARANA dampener provides a controlled, linear soft-open so the tailgate lowers gently every time. Engineered with precise molding to match Dodge RAM tailgate contours, the kit installs using the truck’s existing bolts—no drilling or paint damage—and includes the hardware and simple tools to fit in about ten minutes.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the ARANA Tailgate Assist slow a heavy RAM tailgate?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses a mechanical dampener designed to control the tailgate’s descent speed, turning a sudden drop into a smooth, steady motion. It attaches at OEM mounting points and works with the tailgate’s existing hardware for reliable, repeatable performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLinear dampening action to prevent sudden slams\u003c\/li\u003e\n  \u003cli\u003eReduces strain on cables and latch components\u003c\/li\u003e\n  \u003cli\u003eOperates consistently across normal temperature ranges\u003c\/li\u003e\n  \u003cli\u003eWorks with stock tailgate weight and accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my Dodge RAM model and year?\u003c\/h3\u003e\n\u003cp\u003eARANA Tailgate Assist is designed for multiple RAM generations and specific model years; fitment follows factory tailgate shapes and bolt patterns. Check the compatibility list before ordering to confirm your truck is included.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2009–2012 RAM 1500 and 2010–2012 RAM 2500\/3500 supported\u003c\/li\u003e\n  \u003cli\u003e2013–2018 RAM 1500 and 2013–2026 RAM 2500\/3500 supported\u003c\/li\u003e\n  \u003cli\u003e2019–2024 RAM 1500 Classic supported\u003c\/li\u003e\n  \u003cli\u003eMounts with OEM bolts—no cutting or repainting required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is quick and straightforward—ARANA supplies the dampener and the fasteners you need, plus the basic tool to complete the job. Most users can install the kit in about ten minutes; removing the driver-side bottle opener is typically required for access.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes with necessary bolts and a simple tool\u003c\/li\u003e\n  \u003cli\u003eApproximate install time: 10 minutes for one person\u003c\/li\u003e\n  \u003cli\u003eNo drilling, welding, or trimming of the tailgate\u003c\/li\u003e\n  \u003cli\u003eTip: remove driver-side bottle opener for easier access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes the product look and function like original equipment?\u003c\/h3\u003e\n\u003cp\u003eYes — ARANA molds the dampener to match the tailgate’s shape and mounts at OEM locations for a factory-like appearance and operation. The dampener integrates seamlessly with the tailgate so it looks fitted and performs consistently.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision molding based on the OEM tailgate profile\u003c\/li\u003e\n  \u003cli\u003eUses factory bolt locations and hardware for a clean fit\u003c\/li\u003e\n  \u003cli\u003eNo visible aftermarket modifications to tailgate exterior\u003c\/li\u003e\n  \u003cli\u003eDurable finish designed to withstand daily use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? ARANA Tailgate Assist is for Dodge RAM owners who want a safer, smoother tailgate experience without permanent modifications. It’s ideal for owners of the listed 2009–2026 RAM 1500, 2500, and 3500 models who prefer a quick bolt-in upgrade that preserves factory appearance and reduces wear on tailgate components. If you load or unload your truck frequently, use the tailgate with children or tools present, or simply dislike loud slams, this dampener kit provides an easy, reversible improvement backed by 365 days of ARANA support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does installation require drilling?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No drilling is required; the kit mounts using OEM bolt locations and included hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What if my RAM year is not listed exactly?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Confirm compatibility with the specified year ranges; contact ARANA support if unsure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55164429533527,"sku":"B0F83RDM5X","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-tailgate-assist-front-view.jpg?v=1790352565"},{"product_id":"arana-ford-ranger-tailgate-assist-soft-open-2019-2025-bolt-on-dampener-oem-style-fit-10-min-install","title":"ARANA Ford Ranger Tailgate Assist Soft-Open 2019–2025 — Bolt-On Dampener, OEM-Style Fit, 10-Min Install","description":"\u003cp\u003e\u003cstrong\u003eARANA Tailgate Assist Soft Open is a bolt-on dampener kit that converts the Ford Ranger tailgate into a smooth, slow, and safe soft-open tailgate.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for 2019–2025 Ford Ranger models (including XL, XLT, and Lariat), this ready-to-install kit brings a controlled, linear drop to the factory tailgate so it no longer slams or falls quickly. The precision-molded dampener mounts with OEM bolts without drilling or paint damage and mimics the fit-and-finish of original equipment. ARANA includes the tools and hardware required for a fast install plus one year of customer support.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tailgate assist improve everyday use?\u003c\/h3\u003e\n\u003cp\u003eThe ARANA dampener reduces the tailgate’s drop speed so it opens gently and predictably, making loading, unloading, and standing near the tailgate safer and less awkward. It helps prevent sudden slams that can jolt cargo or injure fingers and reduces stress on tailgate cables and hinges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDelivers a linear, damped opening motion instead of a rapid fall.\u003c\/li\u003e\n  \u003cli\u003eMakes one-person tailgate handling easier and steadier.\u003c\/li\u003e\n  \u003cli\u003eProtects tailgate hardware by reducing impact forces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the ARANA kit fit my Ford Ranger and harm the finish?\u003c\/h3\u003e\n\u003cp\u003eThe dampener was molded to match the Ranger tailgate geometry and uses the truck’s existing mounting points with OEM-style bolts, so no drilling or permanent modification is required. Proper installation preserves the exterior finish and aligns with the factory contours.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2019–2025 Ford Ranger XL, XLT, and Lariat trims.\u003c\/li\u003e\n  \u003cli\u003eMounts with supplied hardware using original bolt holes — no drilling.\u003c\/li\u003e\n  \u003cli\u003ePrecision molding ensures a close aesthetic and secure fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does installation take and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eARANA includes the dampener, all mounting hardware, and the basic tools required for the job, so most owners can install it in about 10 minutes. The procedure is straightforward; the only common step is removing the driver’s-side bottle opener trim to access a mounting point.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAverage install time: approximately 10 minutes.\u003c\/li\u003e\n  \u003cli\u003eSupplied hardware and tools included — minimal experience required.\u003c\/li\u003e\n  \u003cli\u003eTip: removal of the driver-side bottle opener trim is typically necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat support and warranty come with the product?\u003c\/h3\u003e\n\u003cp\u003eARANA backs the dampener with 365 days of customer support from the date of purchase. If you encounter issues within that period, the team pledges to assist until the problem is resolved.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e365 days of ARANA support for fitment or performance questions.\u003c\/li\u003e\n  \u003cli\u003eCustomer service available to walk through installation or troubleshooting.\u003c\/li\u003e\n  \u003cli\u003eReplacement or guidance provided for verified defects within the support window.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The ARANA Tailgate Assist Soft Open is ideal for Ford Ranger owners (2019–2025) who want a safer, smoother tailgate experience without modifying their truck. It’s aimed at daily drivers, tradespeople, and weekend adventurers who value convenience and protection for cargo and tailgate hardware, and who prefer a no-drill, quick-fit solution backed by a year of support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this require drilling or modify the tailgate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No drilling is needed; it mounts using OEM bolt locations and preserves the paint.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installs take about 10 minutes; the kit includes necessary tools and hardware.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55164429566295,"sku":"B08SQDJG6W","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-tailgate-assist-installed-on-ranger.jpg?v=1790352565"},{"product_id":"arana-hood-struts-for-lexus-es350-2007-2014-2-pack-oem-fit-quick-lift-gas-assisted-stable-hold","title":"ARANA Bonnet Struts for Lexus ES350 2007-2014 — 2-Pack OEM-Fit Quick Lift, Gas-Assisted Stable Hold","description":"\u003cp\u003e\u003cstrong\u003eThese ARANA Quick Lift Hood Struts are a direct OEM-fit replacement for Lexus ES350 (2007–2014), giving reliable, gas-assisted lift and stable hood support in a 2-piece set.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your ES350 hood no longer stays open or feels heavy to lift, these aftermarket struts are built to match factory fit and function while costing a fraction of dealer parts. Designed from Grade 45 high-carbon steel with multi-layer chrome plating and wear-resistant hydraulic oil, the pair is engineered to resist corrosion, pressure loss, and performance fade across extreme temperatures. The package includes two matched struts and lists common OEM reference numbers so you can confirm compatibility before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these struts improve everyday hood use?\u003c\/h3\u003e\n\u003cp\u003eThey restore smooth, one-handed opening and firm support when you work under the hood. Unlike worn original struts that sag or close unexpectedly, the ARANA units deliver consistent pressure and damped motion for safer maintenance and faster access.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFirm, gas-assisted lift replaces weak factory struts\u003c\/li\u003e\n  \u003cli\u003eSmooth opening without jerks or sudden drops\u003c\/li\u003e\n  \u003cli\u003eStable hold at full extension for hands-free work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my Lexus ES350 and how do I verify fitment?\u003c\/h3\u003e\n\u003cp\u003eThese are manufactured to match OEM geometry for Lexus ES350 sedans from 2007 through 2014. Before ordering, compare one of your original part numbers to the listed references to ensure exact compatibility and avoid returns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 2007–2014 Lexus ES350 3.5L sedan\u003c\/li\u003e\n  \u003cli\u003eCheck OEM numbers: 96477, 017487, 534400W130, 534400W131, 534500W100, 534500W101, 6477, B96477, SG129034\u003c\/li\u003e\n  \u003cli\u003eSimple visual match of mounting ends and length recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features come with these struts?\u003c\/h3\u003e\n\u003cp\u003eARANA builds these struts from industrial-grade 45# high-carbon steel with mirror chrome plating for corrosion resistance and longevity. Internally they use premium anti-wear hydraulic fluid and are tested to withstand tens of thousands of compression cycles without noticeable force loss.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGrade 45 carbon steel construction with multi-layer chrome finish\u003c\/li\u003e\n  \u003cli\u003eWear-resistant hydraulic oil designed for -40°F to 110°F operation\u003c\/li\u003e\n  \u003cli\u003eRated for 50,000+ cycles to reduce replacement frequency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what support does ARANA provide?\u003c\/h3\u003e\n\u003cp\u003eInstallation is quick and requires only a screwdriver—no special tools or professional service. The design mirrors factory attachment points so replacements typically take about five minutes, and ARANA backs the product with a 365-day support policy if anything goes wrong.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical install time: ~5 minutes per strut with basic tools\u003c\/li\u003e\n  \u003cli\u003eUses factory-style mounting ends for simple swap-out\u003c\/li\u003e\n  \u003cli\u003e365-day customer service for post-sale assistance and issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These ARANA Quick Lift Hood Struts are aimed at Lexus ES350 owners (2007–2014) who want a dependable, OEM-fit hood support without dealer prices. Ideal for DIY vehicle owners, independent mechanics, and anyone who needs safe, consistent hood operation for frequent under-hood access or routine maintenance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these struts compatible with my 2010 Lexus ES350?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these ARANA struts fit Lexus ES350 models from 2007 through 2014. Verify by matching one of your original part numbers to the listed OEM references.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation usually take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typical installation takes about five minutes per strut with a screwdriver and no special tools required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55164429795671,"sku":"B0FJLLDJHF","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-hood-strut-front-packaging.jpg?v=1790352564"},{"product_id":"arana-rear-hatch-struts-for-nissan-rogue-2008-2013-2-piece-direct-fit-corrosion-resistant","title":"ARANA Rear Hatch Struts for Nissan Rogue 2008-2013 — 2-Piece Direct-Fit, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eThese ARANA rear hatch struts are a direct-fit 2-piece replacement designed to restore smooth, reliable lift and hold for Nissan Rogue models from 2008 to 2013.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Rogue's liftgate feels heavy, drops unexpectedly, or won't stay open, replacing the worn gas struts is a fast, affordable fix. ARANA engineered this pair as a budget-conscious, high-durability alternative to dealer parts, using industrial-grade materials and sealed hydraulics so the hatch performs consistently across hot summers and freezing winters.\u003c\/p\u003e\n\n\u003ch3\u003eWill these struts fit my specific Nissan Rogue year and trim?\u003c\/h3\u003e\n\u003cp\u003eYes — these ARANA struts are made to match the mounting and stroke requirements of 2008–2013 Nissan Rogue models across common trims (S, SL, SV and others). Before ordering, compare the OEM numbers or your vehicle’s existing strut to ensure exact compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 2008, 2009, 2010, 2011, 2012, 2013\u003c\/li\u003e\n  \u003cli\u003eFits trims including S, SL, SV, Base, Exclusive, Krom, Advance, Sense Sport\u003c\/li\u003e\n  \u003cli\u003eCross-check OEM numbers: 8917WO, 904501VK0B, 904501VK1A, SG225030, PM1029, 904511VK1A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are ARANA rear hatch struts compared with originals?\u003c\/h3\u003e\n\u003cp\u003eARANA uses Grade 45 high-carbon steel, multi-layer chrome plating and wear-resistant hydraulic fluid for long service life. These components resist rust, oxidation and seal failure so the struts can withstand tens of thousands of cycles without notable loss of force.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed from industrial 45# high-carbon steel for strength\u003c\/li\u003e\n  \u003cli\u003eMulti-layer chrome plating for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eEngineered to endure 50,000+ compression cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install these myself and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eYes — installation is straightforward and typically takes about five minutes per strut using only basic hand tools. The design uses standard ball-stud fittings, so removal and replacement don't require special hydraulic knowledge or an expensive trip to the dealership.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEstimated install time: ~5 minutes per side\u003c\/li\u003e\n  \u003cli\u003eTools: flat-head screwdriver or small trim tool to release retaining clips\u003c\/li\u003e\n  \u003cli\u003eNo specialized tools or professional service required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these struts perform in extreme weather?\u003c\/h3\u003e\n\u003cp\u003eARANA fills the struts with an anti-wear hydraulic fluid and seals them to limit pressure loss and leakage across a wide temperature range. That means dependable lift and dampening from subzero conditions up through hot climates where standard struts often fail sooner.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated functional range: approximately -40°F to 110°F\u003c\/li\u003e\n  \u003cli\u003eSealed design minimizes leaks and pressure drop\u003c\/li\u003e\n  \u003cli\u003eChrome plating helps prevent corrosion in wet or salty environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 2-piece ARANA rear hatch strut set is ideal for Nissan Rogue owners (2008–2013) who want a low-cost, durable replacement that’s easy to fit at home. It’s suited to drivers who prefer aftermarket parts that match OEM fitment and performance while avoiding dealer prices, and to DIYers seeking quick, long-lasting repair for sagging or failing liftgates.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eNote: Always confirm the part number on your current strut or vehicle documentation before purchase to ensure correct fitment.\u003c\/em\u003e\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long do ARANA rear hatch struts last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Built with industrial materials, they’re rated for 50,000+ cycles and resist rust and leaks under normal use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need any special tools to replace them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — replacement typically needs only a screwdriver or trim tool to release the retaining clips.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55164486156631,"sku":"B0DKSZJX31","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-rear-hatch-struts-packaging-front.jpg?v=1790352731"},{"product_id":"arana-hood-struts-for-acura-mdx-2007-2013-pair-oem-fit-quick-5-min-install-corrosion-resistant","title":"ARANA Bonnet Struts for Acura MDX 2007–2013 — Pair OEM-Fit, Quick 5-Min Install, Corrosion-Resistant","description":"\u003cb\u003eThese two ARANA hood struts are direct-fit replacements engineered to restore smooth, reliable lift support for the Acura MDX (2007–2013).\u003c\/b\u003e\n\n\u003cp\u003eIf your MDX hood no longer holds open or moves unevenly, these ARANA gas lift supports offer a durable, budget-friendly fix designed to match OEM fit and function. Built from Grade 45 high-carbon steel with multi-layer chrome plating and premium hydraulic fluid, the pair aims to deliver long-lasting performance in diverse climates while keeping installation simple.\u003c\/p\u003e\n\n\u003ch3\u003eWill these struts fit my Acura MDX 2007–2013?\u003c\/h3\u003e\n\u003cp\u003eARANA supplies these hood struts as an OEM-style match for Acura MDX model years 2007 through 2013. Before ordering, compare the part numbers on your originals to ensure a correct swap and avoid returns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible OEM numbers: 102704, 162764, 74145STXA02, 74149STXA02, PM1109, SG226027\u003c\/li\u003e\n  \u003cli\u003eSold as a pair — left and right included\u003c\/li\u003e\n  \u003cli\u003eDesigned for direct replacement with factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will these replacement struts last under regular use?\u003c\/h3\u003e\n\u003cp\u003eThese struts use industrial-grade 45# high-carbon steel and wear-resistant hydraulic oil to extend operational life. They’re rated to withstand tens of thousands of compression cycles and include corrosion-resistant chrome plating for improved longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurability tested to 50,000+ compression cycles\u003c\/li\u003e\n  \u003cli\u003eMulti-layer chrome finish to reduce rust and oxidation\u003c\/li\u003e\n  \u003cli\u003eHydraulic fluid formulated to resist pressure loss and leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install them myself, or do I need a mechanic?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intentionally simple — most owners can complete the swap in about five minutes using basic tools. The design matches factory mount points so no drilling or special adapters are required, which saves dealer labor costs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall time: roughly 5 minutes for both struts\u003c\/li\u003e\n  \u003cli\u003eTools required: typically a screwdriver or small wrench\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design eliminates the need for modifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these struts perform in extreme temperatures?\u003c\/h3\u003e\n\u003cp\u003eARANA engineered the struts to operate across wide temperature ranges by using wear-resistant hydraulic fluid and sturdy materials. They’re designed to maintain pressure and resist leaks from -40°F to 110°F, keeping hood operation consistent from cold winters to hot summers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperable temperature range: -40°F to 110°F\u003c\/li\u003e\n  \u003cli\u003eSeals and fluid formulated to reduce freeze and boil-related failures\u003c\/li\u003e\n  \u003cli\u003eReliable lift support in varied climates like desert heat or snowy regions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These ARANA hood struts are aimed at Acura MDX owners (2007–2013) who want an affordable, OEM-compatible replacement that’s built to last and simple to install. They suit DIYers who prefer a quick, reliable repair without dealership pricing, and drivers in climates with wide temperature swings who need dependable lift support.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Verify your current hood strut part numbers (listed above) before purchase to ensure proper fitment and avoid returns. ARANA offers a 365-day support period for post-delivery questions or concerns.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts come as a pair?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the product includes two hood struts (left and right) for a complete replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools do I need to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typically a screwdriver or small wrench is all you need; installation takes about five minutes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55164496838999,"sku":"B0D4QT311Y","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-hood-struts-front-view_6552081f-aa42-4445-85a0-50797b20bcbf.jpg?v=1790352816"},{"product_id":"arana-rear-window-struts-for-ford-escape-2008-2012-2-pc-rear-hatch-kit-heavy-duty-chrome-plated","title":"ARANA Rear Window Struts for Ford Escape 2008–2012 — 2-Pc Rear Hatch Kit, Heavy-Duty Chrome-Plated","description":"\u003cp\u003e\u003cstrong\u003eThese ARANA 6260 rear window struts are a direct-fit, heavy-duty replacement set designed to restore smooth, reliable lift support for Ford Escape models from 2008–2012 (and compatible Mercury Mariner years).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf the rear hatch on your Escape feels weak, drops unexpectedly, or no longer holds open, replacing the worn gas struts with a pair of ARANA 6260 units brings back secure, controlled operation. Built from high-carbon Grade 45 steel, finished with multi-layer chrome plating and filled with anti-wear hydraulic fluid, these struts are engineered for long service life across wide temperature ranges. They match common OEM reference numbers, fit the listed model years, and are sold as a two-piece kit so both sides move evenly once installed.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these struts improve my hatch operation?\u003c\/h3\u003e\n\u003cp\u003eSwapping worn struts for ARANA 6260 units restores steady opening, consistent hold, and safe closing behavior. The upgraded internals resist leakage and maintain pressure through thousands of cycles so the hatch won’t sag or slam shut.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores even lift force to both sides of the rear window\u003c\/li\u003e\n  \u003cli\u003ePrevents sudden drops and reduces jarring closures\u003c\/li\u003e\n  \u003cli\u003eDesigned for 50,000+ compression cycles for lasting performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my Ford Escape or Mercury Mariner?\u003c\/h3\u003e\n\u003cp\u003eThese struts are intended for Ford Escape model years 2008–2012 (including Mexico-market Base, XLT, XLS, Limited) and Mercury Mariner 2008–2011 where that part number applies. Confirm compatibility by matching your vehicle’s original strut part number to the OEM references listed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM reference numbers included: 8L847842105AD, 96260, 632162, SG304099, 6260, 631923\u003c\/li\u003e\n  \u003cli\u003eSold as a two-piece rear hatch set to ensure balanced performance\u003c\/li\u003e\n  \u003cli\u003eCheck your original strut for matching part numbers before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these struts in varied weather conditions?\u003c\/h3\u003e\n\u003cp\u003eARANA 6260 struts are built to resist corrosion and temperature-related pressure loss. With mirror chrome plating and premium hydraulic fluid, they keep sealing and moving reliably from frigid mornings to scorching afternoons.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperates reliably from -40°F to 110°F without performance drop-off\u003c\/li\u003e\n  \u003cli\u003eWear-resistant hydraulic oil reduces leaks and pressure decay\u003c\/li\u003e\n  \u003cli\u003eMulti-layer plating and high-carbon steel resist rust and oxidation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation—do I need special tools?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: most owners complete the swap in about five minutes with a basic screwdriver and no special skills. The kit replaces both rear hatch struts to restore balanced motion immediately after fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick, no-professional installation—minimal hand tools required\u003c\/li\u003e\n  \u003cli\u003eIncludes two matching struts for synchronized operation\u003c\/li\u003e\n  \u003cli\u003eInstructions and OEM numbers provided to avoid wrong-fit errors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ARANA 6260 rear window struts are intended for Ford Escape and compatible Mercury Mariner owners who need a dependable, budget-conscious replacement to restore safe hatch operation. They suit DIY mechanics, cost-conscious drivers avoiding dealer fees, and anyone who wants longer-lasting struts built to withstand harsh climates. Confirm the OEM numbers match your original parts before ordering to ensure a correct fit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTop-rated affordable replacement praised in auto forums\u003c\/li\u003e\n  \u003cli\u003ePremium Grade 45 carbon steel and multi-layer chrome plating\u003c\/li\u003e\n  \u003cli\u003eDesigned for long life and all-weather reliability\u003c\/li\u003e\n  \u003cli\u003e365-day customer support from ARANA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts fit all Ford Escape 2008–2012 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many 2008–2012 Escape variants, but compare your original part number to the listed OEM references to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long do ARANA 6260 struts typically last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Built for durability, they withstand 50,000+ compression cycles; actual lifespan varies with use and environment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55164496806231,"sku":"B0DKT33G7S","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-6260-front-view-packaging.jpg?v=1790352815"},{"product_id":"arana-rear-window-struts-for-chevy-tahoe-suburban-2007-2014-2-pcs-direct-fit-heavy-duty-lift-support","title":"ARANA Rear Window Struts for Chevy Tahoe\/Suburban 2007-2014, 2 pcs — Direct-fit Heavy-Duty Lift Support","description":"\u003cstrong\u003eThese ARANA 6157 rear window struts are a direct-fit, heavy-duty replacement for 2007–2014 Chevrolet Tahoe, Suburban (and related GM SUVs), sold as a two-piece set for reliable lift support.\u003c\/strong\u003e\n\n\u003cp\u003eIf the rear hatch on your Tahoe or Suburban no longer holds open or snaps closed unexpectedly, worn gas struts are often the culprit. ARANA engineered these replacement struts from grade 45 high-carbon steel with multi-layer chrome plating and anti-wear hydraulic fluid to restore consistent lift and hold performance across extreme temperatures. The pair installs quickly and is supplied with OEM cross-reference numbers so you can verify fitment before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these struts perform in extreme weather?\u003c\/h3\u003e\n\u003cp\u003eARANA struts are built to resist leaks, pressure loss and corrosion so they continue to lift and hold from winter cold to summer heat. The internal hydraulic fluid and chrome-plated rod reduce friction and oxidation, maintaining smooth operation where cheaper struts fail.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperates reliably between −40°F and 110°F.\u003c\/li\u003e\n  \u003cli\u003eMirror chrome plating prevents rust and pitting.\u003c\/li\u003e\n  \u003cli\u003eWear-resistant hydraulic oil minimizes pressure loss.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and how do I confirm compatibility?\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, compare the OEM numbers printed on your old struts to ARANA's cross-reference list to ensure exact fit. These ARANA struts match multiple part numbers used on 2007–2014 Chevy and GMC SUVs; correct verification avoids returns and ensures proper function.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Chevy Tahoe, Suburban and related GM SUVs 2007–2014.\u003c\/li\u003e\n  \u003cli\u003eCross-reference numbers included: 95812, 025141, 047123, 0975UG, and more.\u003c\/li\u003e\n  \u003cli\u003eVisual match of mounting ends and length recommended before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and can be completed in about five minutes per strut using only a basic screwdriver—no mechanic required. Pop the retaining clips, remove the old strut, and snap the ARANA unit into place; the included design mirrors OEM attachment points for a snug fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical install time: ~5 minutes per strut.\u003c\/li\u003e\n  \u003cli\u003eOnly a screwdriver needed for most vehicles.\u003c\/li\u003e\n  \u003cli\u003eFirm snap-in mounting mimics OEM connection style.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability can I expect compared to dealer parts?\u003c\/h3\u003e\n\u003cp\u003eThese ARANA struts are designed for long service life, surviving more than 50,000 compression cycles in testing. That longevity, combined with a budget-friendly price, helps avoid repeated replacements and dealer labor costs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustrial-grade 45# high-carbon steel for strength.\u003c\/li\u003e\n  \u003cli\u003eMulti-layer chrome plating and anti-wear fluid for long-term reliability.\u003c\/li\u003e\n  \u003cli\u003eBacked by a 365-day service promise from ARANA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and DIYers who own a 2007–2014 Chevrolet Tahoe, Suburban, Escalade or similar GM SUV and want an affordable, long-lasting replacement for failed rear hatch or window struts. It’s suitable for anyone who prefers a quick, low-cost repair over expensive dealer service and who will verify OEM numbers to ensure an exact fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these ARANA struts fit my 2010 Chevy Suburban?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your Suburban uses a rear hatch\/window strut with a matching OEM number from ARANA's list, these will fit. Compare part numbers before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools are required to install the ARANA 6157 struts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installs only need a screwdriver to remove clips and snap the new strut into place—no special tools required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55164496871767,"sku":"B0DHQVJTC4","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-rear-window-strut-front-view_72274806-fe02-4671-81f8-cf9d06e24ad7.jpg?v=1790352817"},{"product_id":"arana-rear-window-struts-for-chevy-suburban-tahoe-2000-2006-2-pack-replacement-liftgate-gas-shocks-oem-fit-weather-resistant","title":"ARANA Rear Window Struts for Chevy Suburban\/Tahoe 2000–2006 — 2-Pack Replacement Liftgate Gas Shocks, OEM-Fit \u0026 Weather-Resistant","description":"\u003cp\u003e\u003cstrong\u003eThese ARANA rear window struts are a direct-fit, two-piece replacement designed to reliably support the rear hatch of Chevy Suburban and Tahoe models from 2000–2006.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your rear liftgate feels heavy, won’t stay open, or the original gas struts have leaked, this pair from ARANA restores smooth opening and secure holding. Engineered to match common OEM fitments for late-model Suburban and Tahoe vehicles, the set focuses on long life, weather resistance and simple DIY installation so you can avoid dealer labor charges.\u003c\/p\u003e\n\n\u003ch3\u003eWill these struts fit my 2000–2006 Chevy Suburban or Tahoe?\u003c\/h3\u003e\n\n\u003cp\u003eThey are made to fit many Suburban and Tahoe rear liftgates from 2000 through 2006, matching several OEM reference numbers. Confirm your original part number(s) against the listed references to ensure compatibility before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with common OEM numbers such as 15029087 \/ 15029088 and equivalents.\u003c\/li\u003e\n  \u003cli\u003eSuitable for many 1500 and 2500 Suburban and Tahoe trims from the listed years.\u003c\/li\u003e\n  \u003cli\u003eCheck your current strut number or compare mounting points to avoid returns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these ARANA rear window struts in extreme climates?\u003c\/h3\u003e\n\n\u003cp\u003eARANA designed these struts to operate across wide temperature ranges and resist the wear that causes leaks and pressure loss. Corrosion-resistant plating and premium hydraulic fluid help the units keep firm gas pressure even in hot summers or freezing winters.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMulti-layer chrome plating prevents rust and keeps moving parts smooth.\u003c\/li\u003e\n  \u003cli\u003eHigh-carbon Grade 45 steel body built for 50,000+ compression cycles.\u003c\/li\u003e\n  \u003cli\u003eSealed, wear-resistant hydraulic oil limits leaks and maintains lift force.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow hard is installation—can I do it myself?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is designed to be quick and user-friendly: most owners swap the struts in about five minutes using only a screwdriver. The ends use standard ball-socket fittings so no special tools or advanced mechanical skills are required.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSnap-on ball sockets match the factory-style mounts for easy removal and replacement.\u003c\/li\u003e\n  \u003cli\u003eNo press tools or spring compressors needed—suitable for DIYers.\u003c\/li\u003e\n  \u003cli\u003eIncludes two struts so both sides of the rear hatch are replaced at once for balanced lift.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and warranty should I expect from ARANA struts?\u003c\/h3\u003e\n\n\u003cp\u003eThese struts are built for prolonged service life and consistent support through repeated cycles, helping avoid frequent replacements. ARANA backs the product with a 365-day support promise so you can request assistance or replacement if an issue arises after delivery.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned to withstand long-term use with industrial-grade materials.\u003c\/li\u003e\n  \u003cli\u003eResists oxidation and maintains pressure better than many economy struts.\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for one year after purchase for added peace of mind.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This ARANA two-pack is ideal for Suburban and Tahoe owners from the 2000–2006 model years who want an affordable, long-lasting replacement for failing rear hatch struts. It’s also a smart pick for DIY mechanics and budget-conscious drivers who prefer a dependable aftermarket alternative to dealer-priced parts—just verify your original part number for the correct fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts fit both left and right sides?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 2-piece set replaces both sides and matches common OEM numbers for 2000–2006 Suburban\/Tahoe models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools do I need to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Usually just a screwdriver; the snap-on ball sockets allow quick DIY replacement without special tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55164497035607,"sku":"B0DDPK3RNY","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-rear-window-strut-front-view.jpg?v=1790352815"},{"product_id":"arana-hood-struts-for-dodge-ram-1500-2500-3500-4500-5500-2002-2010-oem-fit-replacement-pair-quick-install","title":"ARANA Bonnet Struts for Dodge Ram 1500\/2500\/3500\/4500\/5500 2002-2010 — OEM-Fit Replacement Pair, Quick-Install","description":"\u003cp\u003e\u003cstrong\u003eThese ARANA hood struts are direct-fit replacement gas shocks engineered to lift and hold the hoods of Dodge Ram trucks from 2002–2010, restoring effortless, hands-free access to the engine bay.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Dodge Ram hood no longer stays open or requires propping with a rod or elbow, ARANA offers a pair of OEM-fit hood lift supports that match factory mounting points and common part numbers. Designed for Ram 1500 (2002–2008), Ram 2500 and 3500 (2002–2010), and Ram 4500\/5500 (2008–2010), these struts swap in quickly and give predictable lift force and stable positioning so you can work on the engine without juggling tools or risking the hood falling.\u003c\/p\u003e\n\n\u003ch3\u003eWill these replace my truck’s original hood lift supports?\u003c\/h3\u003e\n\n\u003cp\u003eYes — ARANA struts are made to directly replace the stock lifts and fit the factory ball-and-socket mounts used on the listed Dodge Ram years and models. They correspond to common OEM interchange numbers so alignment and fitment are straightforward.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with original part numbers: 55276321AA \/ 55276321AB \/ 55276321AC\u003c\/li\u003e\n  \u003cli\u003eAlso replaces aftermarket references SG314036, 4364\u003c\/li\u003e\n  \u003cli\u003eNo bracket modification required — uses factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools do I need?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is quick and designed for DIY mechanics: no complex tools or garage lifts required. A flat-head screwdriver is all that’s typically needed to pop the retaining clips and seat the ball studs, so the whole job can take about five minutes per side for most people.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eQuick-release clips for fast removal and replacement\u003c\/li\u003e\n  \u003cli\u003ePush-on ball sockets match factory studs—no drilling\u003c\/li\u003e\n  \u003cli\u003eTypical install time: under 10 minutes for both struts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these struts perform compared with worn OEM units?\u003c\/h3\u003e\n\n\u003cp\u003eARANA hood shocks restore reliable lift force and smooth motion, eliminating slow collapse or sag that develops as factory gas-filled struts age. They hold the hood open firmly at full extension and compress smoothly when closing, reducing bangs and abrupt drops.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConsistent lift force for secure open position\u003c\/li\u003e\n  \u003cli\u003eSmooth compression for quiet, controlled closing\u003c\/li\u003e\n  \u003cli\u003eDurable seals and finish to resist corrosion and leakage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat support and warranty does ARANA provide?\u003c\/h3\u003e\n\n\u003cp\u003eARANA backs these hood struts with 18 months of customer support to address fitment questions or potential defects. That gives added peace of mind compared with secondhand or uncertain parts and helps ensure you get the right fit for your Ram model.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e18 months of manufacturer support included\u003c\/li\u003e\n  \u003cli\u003eCustomer service available for fitment guidance\u003c\/li\u003e\n  \u003cli\u003eHassle-friendly replacement options if a part is defective\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These hood struts are intended for Dodge Ram owners and mechanics who need a reliable, OEM-compatible replacement for worn or failed hood lift supports on 2002–2010 Ram 1500\/2500\/3500\/4500\/5500 models. They suit DIYers who want a fast, tool-light swap and fleet or repair shops seeking consistent, drop-in components that match factory behavior without modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these fit my 2005 Dodge Ram 2500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. ARANA hood struts are compatible with Dodge Ram 2500 models from 2002–2010, including 2005, as a direct OEM-fit replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installs take about five minutes per strut using a flat screwdriver to remove and reseat the retaining clips.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55164532195671,"sku":"B00UL3DLNE","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-hood-struts-front-packaging_ada16af0-6c8c-472b-b960-77634d4b99c9.jpg?v=1790353308"},{"product_id":"arana-hood-struts-for-dodge-charger-2011-2020-2-pc-aluminum-style-gas-lift-easy-diy-install","title":"ARANA Bonnet Struts for Dodge Charger 2011-2020 — 2-Pc Aluminum-Style Gas Lift, Easy DIY Install","description":"\u003cstrong\u003eThese ARANA hood struts are a pair of gas lift supports engineered to replace the factory hood props on Dodge Charger (2011–2020) and compatible Chrysler 300 models, giving smooth, reliable one-person hood opening and secure hold.\u003c\/strong\u003e\n\n\u003cp\u003eIf your Charger’s hood no longer stays open or it’s difficult to lift, ARANA’s hood struts offer a durable, low-cost replacement designed to fit many Dodge Charger Pursuit, SXT, and SRT models (2011–2020) and Chrysler 300 variants (2011–2022). Built from high-carbon steel with multi-layer chrome plating and filled with wear-resistant hydraulic oil, these struts aim to restore effortless hood operation without dealer labor or high parts costs.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these hood struts improve daily use of my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThey let one person lift and secure the hood smoothly and safely, eliminating the need for the original prop rod. The gas-charged cylinders provide controlled motion for opening and closing while holding the hood firmly at full extension.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmoother hood lift and gentle lowering for safer access to the engine bay\u003c\/li\u003e\n\u003cli\u003eHolds hood securely open so you can work unassisted\u003c\/li\u003e\n\u003cli\u003eReduces hood slamming and body stress compared with a failing prop rod\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these struts fit my Dodge Charger or Chrysler 300?\u003c\/h3\u003e\n\u003cp\u003eARANA lists compatibility for Dodge Charger model years 2011 through 2020 (including Pursuit, SXT, SRT trims) and Chrysler 300 model years 2011 through 2022 (Base, C, Limited, S, SRT8, Touring). To avoid ordering the wrong part, compare the OEM reference numbers on your original struts before purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMatches common OEM numbers: PM3526, SG314073, 55113776AA\/AB\/AC, 55113777AA\/AB\u003c\/li\u003e\n\u003cli\u003eCheck existing strut part number or vehicle trim to confirm fitment\u003c\/li\u003e\n\u003cli\u003eSimple size and mounting point match makes replacement straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are these struts made of and how long will they last?\u003c\/h3\u003e\n\u003cp\u003eConstructed from industrial-grade 45# high-carbon steel with multi-layer mirror chrome plating and filled with premium anti-wear hydraulic fluid, the struts are designed for longevity and corrosion resistance. ARANA states these units can withstand 50,000+ compression cycles while maintaining lift performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGrade 45 carbon-steel body with chrome finish for rust resistance\u003c\/li\u003e\n\u003cli\u003eWear-resistant hydraulic oil and seals to resist leaks and pressure loss\u003c\/li\u003e\n\u003cli\u003eDesigned to operate across wide temperatures (-40°F to 110°F) without performance drop\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is quick and intended to be a DIY job for most owners. With basic hand tools—commonly a screwdriver for clip removal—these struts can be swapped in about five minutes per side, letting you avoid dealer labor fees.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstallation typically requires only a screwdriver or small wrench\u003c\/li\u003e\n\u003cli\u003eQuick-release clips or ball-stud fittings for fast removal and mounting\u003c\/li\u003e\n\u003cli\u003eManufacturer guidance and OEM number checks reduce the chance of fitment errors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a Dodge Charger (2011–2020) or a Chrysler 300 (2011–2022) and you want an affordable, durable hood lift replacement that restores single-person access to the engine bay, these ARANA hood struts are a practical choice. They suit owners looking to avoid dealer markups, drivers in varied climates who need reliable performance, and DIYers seeking a quick, low-skill install. ARANA also backs the product with a 365-day support promise for buyer peace of mind.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts fit a 2015 Dodge Charger?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—ARANA lists compatibility with Charger model years 2011–2020; confirm by matching your original strut part number.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most owners complete replacement in about five minutes per side using basic hand tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55164534784343,"sku":"B0F83Q714X","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-hood-struts-front-packaging_e1ef41bd-9a32-4561-ba1d-16d96e04f96c.jpg?v=1790353334"},{"product_id":"arana-12-in-40-lb-gas-struts-for-truck-cap-camper-shells-2-pack-10mm-ball-sockets-matched-pair","title":"ARANA 12 in 40 lb Gas Struts for Truck Cap \u0026 Camper Shells, 2-Pack — 10mm Ball Sockets, Matched Pair","description":"\u003cp\u003e\u003cstrong\u003eARANA C16-11028 are a pair of 12-inch, 40 lb gas struts designed to support and smoothly lift camper shell windows, truck topper doors and light toolbox lids.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement lift supports arrive as a matched two-piece set engineered to match common OEM part numbers and fitments for a wide range of camper shells, truck caps and light-duty toolboxes. Each shock measures about 12.2 inches when fully extended and compresses to approximately 7.5 inches, attaches via 10mm ball-stud sockets, and delivers roughly 40 pounds (178 N) of force per strut. The kit is intended for lightweight lids and doors where controlled opening and holding are required.\u003c\/p\u003e\n\n\u003ch3\u003eWhat dimensions and fittings should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eMeasure the installed length from ball-center to ball-center when the lift is fully extended, and verify the compressed length to ensure proper travel. Confirm the ball-stud diameter and mounting style on your vehicle so the 10mm ball-socket end fittings will secure correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length: ~12.2 inches (ball-center to ball-center)\u003c\/li\u003e\n  \u003cli\u003eCompressed length: ~7.5 inches\u003c\/li\u003e\n  \u003cli\u003eEnd fittings: 10mm ball stud sockets\u003c\/li\u003e\n  \u003cli\u003eForce rating: ~40 lb (178 N) per strut\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and applications are these gas shocks compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis ARANA pair is intended for camper shells (Leer, SnugTop), ARE truck caps, truck topper windows and doors, light aluminum or Weather Guard toolboxes, and other lightweight covers. They are commonly used where OEM numbers like 1789sv, C1611028, 24066-001 or LGP6-120-40 are referenced, but always confirm fit before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLeer, SnugTop and ARE camper shells\u003c\/li\u003e\n  \u003cli\u003eTruck topper windows and rear caps\u003c\/li\u003e\n  \u003cli\u003eLight or aluminum toolbox lids and small tailgate covers\u003c\/li\u003e\n  \u003cli\u003eHome-built lids, bins and light-weight cabinet doors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much weight can these gas struts handle and how do I match them to my lid?\u003c\/h3\u003e\n\u003cp\u003eEach strut provides about 40 pounds (178 N) of lift force; a matched pair is best for lids weighing roughly 32–45 pounds. For heavier lids you should choose higher-rated supports or add additional struts to safely balance and control the load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended single-lid weight range per pair: ~32–45 lb\u003c\/li\u003e\n  \u003cli\u003eIf lid is heavier, use additional or stronger struts\u003c\/li\u003e\n  \u003cli\u003eBalance placement matters: mount symmetrically for even lift\u003c\/li\u003e\n  \u003cli\u003eAccount for lid geometry; longer lids may need greater force\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and service life?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward when the correct ball-stud sockets and mounting points are in place; standard hand tools are usually sufficient. ARANA offers customer support for mismatches, missing parts or broken connectors within a 365-day period, but regular inspection and proper mounting will extend performance life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires 10mm ball-stud mounts or adapters\u003c\/li\u003e\n  \u003cli\u003eInstall as a matched pair to avoid uneven wear\u003c\/li\u003e\n  \u003cli\u003eCheck seals and sockets periodically for corrosion or play\u003c\/li\u003e\n  \u003cli\u003eContact ARANA support for missing pieces or fit issues within 365 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This two-piece ARANA C16-11028 kit is aimed at owners of truck caps, camper shells and light toolboxes who need a like-for-like replacement for worn or broken lift supports. Choose this set if your lid or window is within the light-weight range specified, your current fittings use 10mm ball studs, and you want an affordable, OEM-compatible option to restore smooth opening and positive hold.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts fit my Leer or SnugTop camper shell?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They often match Leer and SnugTop models that use the listed OEM numbers, but measure your extended and compressed lengths and verify 10mm ball studs before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can one set support a 40 lb toolbox lid?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this matched pair is rated for lids in roughly the 32–45 lb range; heavier lids need stronger or additional struts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55165017293143,"sku":"B0869C9P6X","price":32.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-c16-11028-front-package.jpg?v=1790354468"},{"product_id":"arana-hood-struts-for-honda-accord-2003-2007-2-pcs-direct-fit-gas-lift-supports-oem-compatible","title":"ARANA Bonnet Struts for Honda Accord 2003–2007 (2 pcs) — Direct-Fit Gas Lift Supports, OEM-Compatible","description":"\u003cp\u003e\u003cstrong\u003eARANA Hood Struts for Honda Accord 2003–2007 are a pair of direct-fit gas lift supports designed to replace worn hood shocks, restoring smooth, reliable hood opening and holding for 4-door Accord models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf the hood on your 2003–2007 Honda Accord droops, opens jerkily, or no longer stays up safely, these ARANA replacement struts provide a budget-friendly, OEM-compatible upgrade. Built from industrial-grade materials and filled with wear-resistant hydraulic oil, the pair aims to match factory fitment and restore quiet, dependable operation in everyday conditions and extreme temperatures.\u003c\/p\u003e\n\n\u003ch3\u003eWill these struts fit my exact Honda Accord model and year?\u003c\/h3\u003e\n\u003cp\u003eYes — the ARANA set is intended for 4-door Honda Accord Base, DX, EX, Hybrid and LX models from model years 2003 through 2007. Always verify your OEM part numbers to confirm compatibility before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible Honda trims: Base\/DX\/EX\/Hybrid\/LX (4-door)\u003c\/li\u003e\n  \u003cli\u003eModel years covered: 2003, 2004, 2005, 2006, 2007\u003c\/li\u003e\n  \u003cli\u003eOEM part references to check: 74145SDBA02, 74195SDBA02, 74145SDR305, 74145SD6A023\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design requires no modifications when matched to correct OEM number\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these hood struts in real-world conditions?\u003c\/h3\u003e\n\u003cp\u003eARANA uses Grade 45 high-carbon steel, multi-layer chrome plating and premium anti-wear hydraulic fluid to resist corrosion and maintain pressure. They are rated to perform across harsh climates and are engineered to last for many compression cycles before performance degrades.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: industrial 45# high-carbon steel with multi-layer chrome plating\u003c\/li\u003e\n  \u003cli\u003eHydraulics: wear-resistant oil to reduce leaks and pressure loss\u003c\/li\u003e\n  \u003cli\u003eTemperature range: tested to function from -40°F to 110°F\u003c\/li\u003e\n  \u003cli\u003eLongevity: built to withstand 50,000+ compression cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation—do I need special tools or a mechanic?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and designed for home mechanics: most users can complete the swap in about five minutes using only a screwdriver and basic caution. The struts attach to the existing ball studs or brackets, and no drilling or trimming is required when the OEM numbers match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEstimated install time: ~5 minutes for both struts\u003c\/li\u003e\n  \u003cli\u003eTools required: common screwdriver or small wrench depending on vehicle clips\u003c\/li\u003e\n  \u003cli\u003eNo welding or modification when compatible with OEM part number\u003c\/li\u003e\n  \u003cli\u003eStep-by-step replacement is typical: support hood, remove old clips, snap new struts into place\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with ARANA struts?\u003c\/h3\u003e\n\u003cp\u003eARANA provides a 365-day support period after delivery so you can contact the brand about fitment or performance concerns. This coverage helps ensure you can get assistance quickly if any issue arises after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e365-day customer support from ARANA\u003c\/li\u003e\n  \u003cli\u003eReach out for fitment questions or product concerns\u003c\/li\u003e\n  \u003cli\u003eSeller-backed support intended to reduce returns and installation worries\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This ARANA hood strut pair is aimed at Honda Accord owners (2003–2007 4-door models) who want a direct-fit, value-minded replacement that restores hood lift and safety without dealer costs. It suits DIYers who prefer quick, tool-light installs and drivers living in regions with wide temperature swings who need corrosion-resistant, long-lasting hydraulic supports.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts replace the OEM part directly?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your Accord's OEM part number matches one listed; verify numbers before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long do ARANA hood struts typically last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are built for 50,000+ cycles and designed to resist leaks and corrosion over years.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55165382492503,"sku":"B0D7VQRZBP","price":33.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-hood-strut-front-pair.jpg?v=1790354941"},{"product_id":"arana-10-5-25-lb-gas-strut-pair-for-truck-tool-boxes-rv-cabinets-10mm-ball-ends-sealed-carbon-steel","title":"ARANA 10.5\" 25 lb Gas Strut Pair for Truck Tool Boxes \u0026 RV Cabinets — 10mm Ball Ends, Sealed Carbon Steel","description":"\u003cp\u003e\u003cstrong\u003eARANA 10.5-inch gas struts (2-pack) are replacement lift supports rated for 25 lb that stabilize and hold open truck tool box lids, RV cabinets, boat hatches and other storage lids.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two gas springs offer a direct-fit option when you need smooth, reliable lid support without reworking mounting points. Built from carbon steel with a sealed design and pre-attached 10mm ball ends, they replace common OEM struts used in many truck tool box brands and household cabinetry. The pair is tested for long life and engineered for simple DIY swaps.\u003c\/p\u003e\n\n\u003ch3\u003eWill these struts fit my Weather Guard, Husky or other tool box?\u003c\/h3\u003e\n\u003cp\u003eYes — they are designed as a direct replacement for a wide range of popular truck tool boxes and similar lids. Match the center-to-center extended and compressed lengths and the 10mm ball end to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length: 10.5 inches center-to-center\u003c\/li\u003e\n  \u003cli\u003eCompressed length: 6.7 inches center-to-center\u003c\/li\u003e\n  \u003cli\u003eBall end diameter: 10 mm pre-attached\u003c\/li\u003e\n  \u003cli\u003eSuitable for Weather Guard, Husky, UWS, Better Built, Delta, Dee Zee and similar models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much weight will a 25 lb gas strut support and how many do I need?\u003c\/h3\u003e\n\u003cp\u003eEach strut provides approximately 25 pounds (111 N) of support force, meant for lids in the 20–30 lb range when used as recommended. Many installations use two struts for even lifting and secure holding; single-strut setups may work for some lighter or counterbalanced lids.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated force: 25 lb (111 N)\u003c\/li\u003e\n  \u003cli\u003eRecommended lid weight per strut: 20–30 lb\u003c\/li\u003e\n  \u003cli\u003eCommon configuration: two struts for even lift and stability\u003c\/li\u003e\n  \u003cli\u003eNot intended to replace hinges or bear extreme loads alone\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features do these gas springs have?\u003c\/h3\u003e\n\u003cp\u003eARANA gas struts are built with carbon steel bodies and a sealed design to resist the elements and mechanical wear. They have been cycle-tested for longevity and finished to withstand exposure to rain, snow and cold climates common to truck and outdoor use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarbon steel construction for strength\u003c\/li\u003e\n  \u003cli\u003eSealed design to reduce moisture ingress and corrosion\u003c\/li\u003e\n  \u003cli\u003eTested for 50,000+ cycles for consistent motion\u003c\/li\u003e\n  \u003cli\u003eSmooth extension for reliable opening and holding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what’s included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic hand tools — no specialty equipment required. The product ships with two gas struts that already have 10mm ball ends attached, plus an instruction guide and an after-sales contact card; mounting hardware is not included, so reuse your existing brackets or get compatible fasteners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: 2 gas struts with 10mm ball ends, instruction guide, contact card\u003c\/li\u003e\n  \u003cli\u003eMounting brackets and screws: not included; reuse original hardware or buy separately\u003c\/li\u003e\n  \u003cli\u003eTools typically needed: screwdriver, simple measurements, possibly a wrench\u003c\/li\u003e\n  \u003cli\u003eQuick DIY swap: measure center-to-center lengths before replacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These ARANA gas struts are made for vehicle owners, RV and boat enthusiasts, handymen and DIYers who need a dependable replacement for worn or broken lift supports. They suit anyone restoring or upgrading truck tool boxes, RV cabinets, hatches or storage lids who wants a long-lasting, easy-to-install solution that matches common OEM fittings.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these struts replace my existing 10.5-inch gas springs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if your measurements match: 10.5\" extended, 6.7\" compressed, and 10mm ball ends. They replace many OEM struts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are mounting brackets included with the ARANA gas struts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The pack includes two struts and an instruction guide; reuse existing brackets or purchase compatible hardware.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55165630972247,"sku":"B09YRMX6J7","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-front-view-tool-box-struts.jpg?v=1790356689"},{"product_id":"arana-rear-hatch-struts-for-honda-pilot-2003-2007-2-pc-direct-fit-gas-lift-kit-corrosion-resistant","title":"ARANA Rear Hatch Struts for Honda Pilot 2003–2007 — 2-Pc Direct-Fit Gas Lift Kit, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eARANA 4373 rear hatch struts are a two-piece direct replacement kit engineered to restore reliable lift and secure hold for Honda Pilot model years 2003–2007.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Pilot’s liftgate sags, won’t stay open, or slams shut, this pair of gas-assisted hatch struts is made to match factory fit and function without expensive dealer parts. These struts are offered as an exact-fit replacement with multiple OEM cross-reference numbers so you can swap out worn shocks quickly and return the hatch to smooth, controlled operation.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these struts match my Honda Pilot’s original parts?\u003c\/h3\u003e\n\u003cp\u003eARANA struts are manufactured to align with common OEM references for the Pilot 2003–2007 range, ensuring correct mounting points and stroke length for a direct fit. That means no trimming, no custom brackets — just remove the old struts and install the replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCross-references include 95374, 029499, 14187, 53440-0C030 and other common OEM codes\u003c\/li\u003e\n  \u003cli\u003eSold as a two-piece set to replace both left and right hatch gas shocks\u003c\/li\u003e\n  \u003cli\u003eDesigned to match factory dimensions for bolt and ball-socket style mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these struts hold the hatch reliably in hot or cold climates?\u003c\/h3\u003e\n\u003cp\u003eYes — the valves and hydraulic fill are chosen to maintain consistent pressure across a wide temperature span, so lift performance stays predictable from winter cold to summer heat. Sealing and plating reduce leak risk and slow corrosion for longer service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperates across an approximate range of -40°F to 110°F for year-round use\u003c\/li\u003e\n  \u003cli\u003eMulti-layer chrome plating resists rust in wet or salty conditions\u003c\/li\u003e\n  \u003cli\u003eWear-resistant hydraulic oil minimizes pressure loss and sticking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these gas struts and how long will they last?\u003c\/h3\u003e\n\u003cp\u003eThese struts use high-carbon 45# steel and industrial-grade components built to withstand repeated cycles without rapid force decline. ARANA rates the construction for extensive compression cycles and provides replacement support if quality issues arise during the warranty period.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed from Grade 45 high-carbon steel for strength and longevity\u003c\/li\u003e\n  \u003cli\u003eManufactured to exceed typical wear expectations with 50,000+ cycle durability\u003c\/li\u003e\n  \u003cli\u003eIncludes 365-day replacement support from ARANA for covered defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is the installation—do I need special tools?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and can be completed in about ten minutes using only common household tools. The procedure is a simple ball-socket swap: release the old strut, align the new one, and snap the fittings into place; no specialist tools or workshops required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEstimated install time: roughly 10 minutes for both sides\u003c\/li\u003e\n  \u003cli\u003eOnly a flat-head screwdriver typically required to unclip retaining clips\u003c\/li\u003e\n  \u003cli\u003eComes as a ready-to-install two-piece kit with standard ball-end fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This ARANA 4373 two-piece hatch strut kit is ideal for Honda Pilot owners (2003–2007) who want a cost-effective, factory-compatible replacement to stop a sagging liftgate, prevent sudden closures, and restore smooth opening and closing. It suits DIYers wanting a fast, tool-light swap, fleet managers replacing worn hardware, and anyone seeking a durable alternative to aftermarket parts backed by a one-year replacement support policy.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts fit Honda Pilot 2008 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: These ARANA 4373 struts are specified for 2003–2007 Pilots; 2008 compatibility may differ—check OEM cross-reference numbers before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools are required to install the replacement hatch struts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Installation typically needs only a flat-head screwdriver to release clips; no special tools are required for the swap.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55166378475863,"sku":"B00X5KVDJO","price":37.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-front-packaging-and-parts.jpg?v=1790367501"},{"product_id":"arana-rear-window-struts-for-honda-pilot-2009-2015-2-pc-oem-fit-high-carbon-steel","title":"ARANA Rear Window Struts for Honda Pilot 2009–2015 — 2-Pc OEM-Fit, High-Carbon Steel","description":"\u003cp\u003e\u003cstrong\u003eARANA Rear Window Struts are a direct-fit, durable 2-piece replacement designed to restore smooth, reliable lift support to Honda Pilot models from 2009 to 2015.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Pilot’s rear hatch or liftgate no longer holds open, feels heavy, or drops unexpectedly, these ARANA struts provide an affordable OEM-style repair. Engineered from high-carbon Grade 45 steel with multi-layer chrome plating and premium anti-wear hydraulic fluid, they’re built to withstand wide temperature ranges and tens of thousands of cycles so your liftgate works like new again without the dealer price tag.\u003c\/p\u003e\n\n\u003ch3\u003eWill these struts fit my Honda Pilot?\u003c\/h3\u003e\n\u003cp\u003eThey are manufactured as an OEM-style match specifically for Honda Pilot model years 2009 through 2015. Before ordering, compare your existing part number to the listed compatible numbers to ensure a correct match and avoid returns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible OEM numbers: 240917, 74825SZAA01, 74825-SZA-A01, 74875SZAA01, 74875-SZA-A01, PM1111, SG326019\u003c\/li\u003e\n  \u003cli\u003eSold as a 2-piece pair for both sides of the rear hatch\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design: bolt-on replacement, no special tools required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these replacement lift supports under real-world conditions?\u003c\/h3\u003e\n\u003cp\u003eARANA struts use industrial-grade 45# high-carbon steel, chrome plating, and wear-resistant hydraulic oil to resist corrosion, leaking, and pressure loss. They’re tested for long service life and rated to endure tens of thousands of compression cycles, making them suitable for climates from very cold to very hot.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterials: Grade 45 carbon steel with multi-layer chrome plating\u003c\/li\u003e\n  \u003cli\u003eHydraulic fluid: anti-wear formulation to reduce leaks and friction\u003c\/li\u003e\n  \u003cli\u003eOperational range: approximately -40°F to 110°F for reliable lift support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation—do I need a mechanic?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and designed for DIY drivers: most owners can replace both struts in about five minutes using only a screwdriver. The ARANA units attach using the same mounting points as the original equipment and follow the same clips and bolts, so no drilling or special adapters are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEstimated install time: ~5 minutes with a screwdriver\u003c\/li\u003e\n  \u003cli\u003eNo specialty tools or garage visit required—bolt-on replacement\u003c\/li\u003e\n  \u003cli\u003eIncludes clear fitment info to prevent wrong-part orders\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kind of warranty or support comes with the struts?\u003c\/h3\u003e\n\u003cp\u003eARANA offers a 365-day customer support period covering post-delivery issues; reach out if you experience fitment problems or defects. The policy aims to give buyers confidence in performance and straightforward help if something goes wrong.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e365-day support for fitment or quality concerns\u003c\/li\u003e\n  \u003cli\u003eCustomer service available to troubleshoot installation or performance\u003c\/li\u003e\n  \u003cli\u003eReplacement guidance if part mismatch is confirmed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These ARANA rear window struts suit Honda Pilot owners (2009–2015) who want a cost-effective, OEM-compatible replacement that restores safe hatch operation without dealer labor charges. They’re ideal for DIYers seeking a quick, bolt-on repair; buyers in extreme climates who need robust, leak-resistant units; and anyone who prefers a long-lasting, corrosion-resistant alternative to cheap aftermarket struts. Verify your original part number matches the listed OEM numbers before purchase to ensure perfect fitment and a trouble-free install.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts fit all Honda Pilot trims from 2009 to 2015?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they are designed for Pilot Base\/EX\/EX-L\/LX\/Touring Sport model years 2009–2015. Check your OEM part number against the listed numbers to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take and what tools are needed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most owners install both struts in about five minutes using only a screwdriver—no special tools or professional help required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55166393581911,"sku":"B0DNQ1SCTF","price":37.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-rear-strut-front-view.jpg?v=1790367863"},{"product_id":"arana-hood-struts-for-acura-tl-2006-2008-2-pc-chrome-plated-gas-lift-durable","title":"ARANA Bonnet Struts for Acura TL (2006–2008) 2-Pc — Chrome-Plated Gas Lift, Durable","description":"\u003cp\u003e\u003cstrong\u003eARANA Hood Struts for Acura TL (2006–2008) are a 2-piece set of gas lift supports engineered to replace worn factory hood struts and hold your hood open safely and smoothly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your 2006, 2007 or 2008 Acura TL Base or Type-S hood no longer stays up or feels weak during opening, these ARANA replacement hood struts restore reliable lift without the dealer price. Built from industrial-grade materials with polished chrome plating and upgraded hydraulic oil, the pair is designed for long life across wide temperature ranges and quick DIY installation. Before ordering, check the OEM part numbers listed on your original struts to confirm a match.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these hood struts perform in hot or cold weather?\u003c\/h3\u003e\n\u003cp\u003eARANA hood struts use wear-resistant hydraulic fluid and Grade 45 high-carbon steel so the lift action remains consistent from freezing winters to blazing summers. The multi-layer chrome finish helps resist corrosion and keeps the piston surface smooth for reliable sealing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperates reliably from -40°F to 110°F\u003c\/li\u003e\n  \u003cli\u003eWear-resistant hydraulic oil reduces leak and pressure loss\u003c\/li\u003e\n  \u003cli\u003eChrome plating protects against rust and surface wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my Acura TL and how do I check compatibility?\u003c\/h3\u003e\n\u003cp\u003eThese struts are made to match common replacement dimensions for Acura TL models 2006–2008 (Base and Type-S). Always compare the part numbers and physical mounting style on your existing struts before buying to avoid fitment issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 2006, 2007, 2008 — Base and Type-S\u003c\/li\u003e\n  \u003cli\u003eOEM cross-reference: PM1019, 9489VU, 74149SEPH01, 74145SEPH01\u003c\/li\u003e\n  \u003cli\u003eQuick visual check: compare ball-stud ends and overall compressed length\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and designed for DIY mechanics: most users can swap both struts in about five minutes using only a screwdriver or small socket. The design uses standard ball-stud mounts that clip on and off, so no special tools or garage lifts are necessary.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEstimated install time: ~5 minutes for both struts\u003c\/li\u003e\n  \u003cli\u003eCommon tools: screwdriver or small socket set\u003c\/li\u003e\n  \u003cli\u003eNo advanced mechanical skills required — push clips on\/off the ball studs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will these hood supports last compared with stock parts?\u003c\/h3\u003e\n\u003cp\u003eARANA manufactures these struts from industrial-grade 45# high-carbon steel and fills them with premium anti-wear hydraulic fluid to extend service life well beyond many aftermarket options. The parts are rated for 50,000+ compression cycles, and the robust plating reduces oxidation for longer use in salty or humid environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable construction rated for 50,000+ cycles\u003c\/li\u003e\n  \u003cli\u003eMulti-layer chrome plating fights corrosion and wear\u003c\/li\u003e\n  \u003cli\u003e365-day support from ARANA for post-purchase assistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These ARANA hood struts are aimed at Acura TL owners (2006–2008 Base and Type-S) who want a reliable, budget-friendly replacement that improves safety and convenience without dealer labor costs. They’re ideal for DIYers who prefer quick, tool-light installations, and for drivers in climates with large temperature swings who need a durable, long-lasting lift solution. Verify OEM numbers before purchase to ensure proper fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts fit Acura TL 2006 Type-S?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they’re designed for 2006–2008 Acura TL Base and Type-S, but confirm OEM part numbers before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install them myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — installation typically takes about five minutes with a screwdriver or small socket and no special skills.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55166401249623,"sku":"B00X7FF3Q6","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-hood-struts-installed-front-view.jpg?v=1790367997"},{"product_id":"arana-rear-hatch-struts-for-kia-soul-2010-2013-2-pc-set-high-carbon-steel-leak-resistant","title":"ARANA Rear Hatch Struts for Kia Soul 2010-2013, 2-Pc Set — High-Carbon Steel, Leak-Resistant","description":"\u003cp\u003e\u003cstrong\u003eARANA 817702K00 rear hatch struts are a direct-fit, two-piece replacement designed to restore smooth, reliable lift and hold for Kia Soul hatchbacks from 2010 to 2013.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Kia Soul's liftgate droops, opens sluggishly, or won't stay up, worn gas struts are usually the cause. These ARANA rear hatch struts are manufactured from high-carbon steel with multi-layer chrome plating and premium hydraulic fluid to resist leaks and wear. They match common OEM numbers used on 2010–2013 Soul models, offer all-weather performance, and install in minutes without special tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these struts improve my hatch's performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing tired struts restores crisp opening, steady holding, and consistent damping when lowering the hatch. The ARANA units are engineered for high cycle life and better seal integrity than many budget alternatives, reducing sag and uneven motion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores firm, steady open-and-hold action for the liftgate.\u003c\/li\u003e\n  \u003cli\u003eReduces sudden drops or slow, sticky movement when opening.\u003c\/li\u003e\n  \u003cli\u003eImproved seal and hydraulic fluid minimize leak-related failures.\u003c\/li\u003e\n  \u003cli\u003eRated for extended cycles to avoid frequent replacements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my Kia Soul model and how do I confirm fitment?\u003c\/h3\u003e\n\u003cp\u003eThese struts are sold as a set that fits 2010 through 2013 Kia Soul variants including Base, 2U\/4U, Exclaim, Plus, and Sport when the vehicle uses the listed OEM part numbers. Always compare the OEM references on your current struts to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCross-reference OEM numbers: 4B545879, 4B545879W, 817702K00, 545879, SG35008.\u003c\/li\u003e\n  \u003cli\u003eMatch length and mounting style against your existing struts.\u003c\/li\u003e\n  \u003cli\u003eContact seller support if you are unsure — quick verification prevents returns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these compared with dealer or cheap aftermarket struts?\u003c\/h3\u003e\n\u003cp\u003eARANA builds these struts from Grade 45 high-carbon steel with multi-layer chrome plating and wear-resistant hydraulic oil to resist oxidation and pressure loss across temperature extremes. That construction is specified to withstand many more compression cycles than generic low-cost struts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustrial-grade 45# steel resists bending and fatigue under load.\u003c\/li\u003e\n  \u003cli\u003eChrome plating and rust-resistant finishes protect against corrosion.\u003c\/li\u003e\n  \u003cli\u003eHydraulic fluid formulated to operate from -40°F to 110°F.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and designed for DIYers: most customers replace both hatch struts in under five minutes with a common screwdriver. No heavy lifting or specialty tools required, though a second pair of hands helps when removing the old struts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical install time: about 5 minutes for both struts.\u003c\/li\u003e\n  \u003cli\u003eOnly a screwdriver or small socket set usually needed.\u003c\/li\u003e\n  \u003cli\u003eIncludes clear OEM-compatible mounting orientation—no modification required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This two-piece ARANA kit is aimed at Kia Soul owners (2010–2013) who want a cost-effective, long-lasting hatch lift replacement without dealer pricing. It suits DIY drivers, independent mechanics, and anyone seeking a reliable aftermarket strut that matches common OEM part numbers and withstands seasonal temperature swings. If you need a quick, durable fix to stop sagging or leaking hatch supports and prefer an easy home installation, these ARANA rear hatch struts are designed to deliver practical value and dependable function.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these ARANA struts fit all 2010–2013 Kia Soul trims?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit most 2010–2013 Soul trims (Base, 2U\/4U, Exclaim, Plus, Sport) when OEM part numbers match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take and what tools are needed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typical install takes about 5 minutes using a screwdriver or small socket; no specialty tools required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55166401872215,"sku":"B0DK1GDTG6","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-rear-hatch-struts-front-view.jpg?v=1790368014"},{"product_id":"arana-12-inch-24-lb-gas-struts-for-leer-canopy-2-pack-precharged-corrosion-resistant-replacements","title":"ARANA 12-inch 24 lb Gas Struts for LEER Canopy — 2-Pack, Precharged Corrosion-Resistant Replacements","description":"\u003cp\u003e\u003cstrong\u003eThese ARANA 12-inch, 24 lb gas struts (2-pack) replace LEER canopy lift supports (part C16-09903 \/ 691003) to restore smooth, reliable tailgate and hatch opening.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your truck cap or LEER canopy lid sags, closes too quickly, or leaks hydraulic fluid, this two-pack of ARANA gas struts offers a direct-fit replacement so you can regain dependable lift assistance. Engineered for all-season performance from extreme cold to high heat, these cylinder-and-rod assemblies arrive prefilled and ready to install with basic tools. The kit lists multiple interchange numbers so you can confirm fitment with your canopy model before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these struts improve canopy opening and closing?\u003c\/h3\u003e\n\u003cp\u003eThese gas springs supply consistent 24 lb push force to hold and lift the canopy hatch smoothly throughout its travel. With refined internal damping and tight seals, they reduce sudden drops, minimize bounce, and allow one-person operation without slamming.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24 lb nominal force to support typical LEER canopy lids\u003c\/li\u003e\n  \u003cli\u003eEven damping for smooth motion and reduced vibration\u003c\/li\u003e\n  \u003cli\u003ePrecharged hydraulic oil and tight seals to prevent leaks\u003c\/li\u003e\n  \u003cli\u003eDirect-fit replacement using supplied mounting ends for simple swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these struts durable enough for year-round use?\u003c\/h3\u003e\n\u003cp\u003eYes—the ARANA struts are built from industrial Grade 45 high-carbon steel with multi-layer chrome plating and wear-resistant hydraulic fluid, designed to resist corrosion and maintain pressure through wide temperature swings. They’re specified to withstand tens of thousands of cycles without noticeable loss of lift capability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGrade 45 carbon steel body resists bending and wear\u003c\/li\u003e\n  \u003cli\u003eMirror chrome finish reduces rust and surface corrosion\u003c\/li\u003e\n  \u003cli\u003eHydraulic oil optimized for -40°F to 110°F operation\u003c\/li\u003e\n  \u003cli\u003eRated for 50,000+ compression cycles for long service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation for a DIYer?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and requires only a screwdriver and basic hand tools—no specialist equipment or dealer visit. The struts arrive as a ready-to-install pair with common interchanging part numbers (691003-24#, C1609903, C1625685), so you can match them to your LEER canopy before starting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSwap time: typically about 5 minutes per strut\u003c\/li\u003e\n  \u003cli\u003eNo specialty tools or professional technician required\u003c\/li\u003e\n  \u003cli\u003eMounting ends compatible with common LEER canopy fittings\u003c\/li\u003e\n  \u003cli\u003eClear fitment list to verify part numbers before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty or support does ARANA provide?\u003c\/h3\u003e\n\u003cp\u003eARANA backs these gas struts with a 365-day customer support promise so you can request help or replacements within a year of purchase. The company offers responsiveness on defects or fit issues rather than lengthy service hoops.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e365-day hassle-aware service from ARANA\u003c\/li\u003e\n  \u003cli\u003eCustomer support for fitment and installation questions\u003c\/li\u003e\n  \u003cli\u003eFocused replacement assistance for manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These ARANA 12-inch, 24 lb canopy struts are ideal for truck owners using LEER or compatible canopies who need a cost-effective, long-lasting replacement. They suit DIYers who want quick, dealer-free repairs, fleet managers seeking consistent performance across vehicles, and anyone in climates ranging from cold winters to hot summers who needs reliable lift support without frequent replacements.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts fit my LEER canopy?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They match common LEER interchange numbers (691003, C16-09903). Verify the original part number on your canopy to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install them myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Typical installation takes about five minutes per strut with a screwdriver and basic hand tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55166660870487,"sku":"B09YRNF1MR","price":35.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-front-packaging-12inch-24lb.jpg?v=1790369602"},{"product_id":"arana-10-gas-struts-80-lb-pair-10in-extended-6-46in-compressed-10mm-ball-ends-for-truck-tool-boxes-rv-cabinets","title":"ARANA 10\" Gas Struts 80 lb Pair — 10in Extended \/ 6.46in Compressed, 10mm Ball Ends for Truck Tool Boxes \u0026 RV Cabinets","description":"\u003cp\u003e\u003cstrong\u003eThese ARANA 10-inch gas struts deliver 80 lb (356 N) lid support for truck tool boxes, RV cabinets, boat hatches and DIY lids, sold as a pair with pre-attached 10mm ball ends.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a direct, durable replacement for worn or weak lid supports, the ARANA pair is sized for 10\" extended center-to-center and compresses to 6.46\"—designed to replace common OEM part numbers C16-15052 and C1615052. Constructed from carbon steel with a sealed design, these gas struts are engineered to resist weather and deliver smooth operation through tens of thousands of cycles. They’re a popular fit for Weather Guard, Husky, Better Built, UWS, Delta, Dee Zee tool boxes and adaptable to RVs, boats, kitchen cabinets and custom projects.\u003c\/p\u003e\n\n\u003ch3\u003eWill these gas struts fit my truck tool box or RV cabinet?\u003c\/h3\u003e\n\u003cp\u003eMeasure center-to-center length when the strut is fully extended and fully compressed, then compare force rating. ARANA struts are 10\" extended and 6.46\" compressed with an 80 lb (356 N) support rating—compatible with many OEM replacements listed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended: 10\" (center-to-center)\u003c\/li\u003e\n  \u003cli\u003eCompressed: 6.46\" (center-to-center)\u003c\/li\u003e\n  \u003cli\u003eSupport rating: 80 lb \/ 356 N for 75–85 lb lids\u003c\/li\u003e\n  \u003cli\u003eOEM cross reference: C16-15052, C1615052\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the ARANA gas struts?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and designed for DIY work—no specialized tools required. Reuse your existing mounting brackets or buy compatible hardware if needed; the struts come with pre-attached 10mm ball ends for quick snap-on attachment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools needed: screwdriver, tape measure, possibly a drill if new brackets are required\u003c\/li\u003e\n  \u003cli\u003eMounting: attach ball ends to existing 10mm sockets or compatible brackets\u003c\/li\u003e\n  \u003cli\u003eTip: install with strut body mounted to the stationary side and rod toward the lid for best life\u003c\/li\u003e\n  \u003cli\u003eBracket\/screws: not included—reuse or purchase separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these gas struts for outdoor and marine use?\u003c\/h3\u003e\n\u003cp\u003eARANA struts use carbon steel and a sealed design to stand up to rain, snow and cold climates. Each unit is tested for more than 50,000 cycles to ensure consistent extension and reliable support over many years of repeated use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: carbon steel construction\u003c\/li\u003e\n  \u003cli\u003eSealed design for weather resistance\u003c\/li\u003e\n  \u003cli\u003eTested for 50,000+ cycles—smooth motion and long service life\u003c\/li\u003e\n  \u003cli\u003eSuitable for trucks, RVs, boats, and indoor cabinets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These ARANA gas struts are aimed at vehicle owners, fleet managers, RV and boat enthusiasts, and DIYers who want a dependable, OEM-compatible replacement for worn lid supports. If you own a Weather Guard, Husky, Better Built, UWS, Delta or Dee Zee tool box—or need lift support for cabinets, hatches or storage lids—this two-piece set offers a cost-effective way to restore safe, controlled lid operation. The pack includes two pre-fitted struts, an instruction guide and ARANA after-sales contact information, plus one year of support for installation or product questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts replace OEM C16-15052?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. ARANA 10\" struts match OEM C16-15052 and C1615052 dimensions and 80 lb rating for direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are mounting brackets included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Struts include pre-attached 10mm ball ends; reuse existing brackets or purchase compatible hardware separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55166669848919,"sku":"B0BK8SDXW3","price":37.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-gas-struts-front-view.jpg?v=1790369922"},{"product_id":"arana-rear-window-struts-for-jeep-wrangler-tj-1997-2006-2-pcs-oem-fit-heavy-duty","title":"ARANA Rear Window Struts for Jeep Wrangler TJ 1997–2006, 2 Pcs — OEM-fit, Heavy-Duty","description":"\u003cp\u003e\u003cstrong\u003eThese ARANA rear window struts are a 2-piece OEM-fit replacement engineered to support the rear window\/hatch of Jeep Wrangler TJ models from 1997–2006.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Wrangler’s rear hatch no longer holds open or the factory shocks are leaking, these ARANA struts offer an affordable, heavy-duty replacement that matches common OEM part numbers. Made from high-carbon Grade 45 steel, multi-layer chrome plated, and filled with wear-resistant hydraulic fluid, they are built to resist rust and to deliver consistent lift performance across temperature extremes. The 2-piece set is sold as a direct-fit kit intended for easy, fast installation without special tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow reliable are these struts compared with original equipment?\u003c\/h3\u003e\n\n\u003cp\u003eARANA designed these struts for long service life using industrial-grade materials and durable hydraulic seals. They are rated to endure more than 50,000 compression cycles and include multi-layer chrome plating to resist corrosion that shortens typical replacement intervals.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed from Grade 45 high-carbon steel for strength and durability\u003c\/li\u003e\n  \u003cli\u003eMulti-layer mirror chrome plating to resist rust and oxidation\u003c\/li\u003e\n  \u003cli\u003ePremium anti-wear hydraulic fluid and improved seals for leak resistance\u003c\/li\u003e\n  \u003cli\u003eTested to perform reliably from -40°F to 110°F\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my Jeep Wrangler TJ and how do I confirm compatibility?\u003c\/h3\u003e\n\n\u003cp\u003eThese struts are intended for Jeep Wrangler TJ body styles from 1997 through 2006 and match many OEM reference numbers. Before buying, compare your existing strut number to the listed OEM numbers to ensure a correct match and avoid returns.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCommon compatible OEM numbers: 14603, 95749, 10663, 2884NY\u003c\/li\u003e\n  \u003cli\u003eAlso cross-referenced: 4249, 55076310AB, 610665, 72236\u003c\/li\u003e\n  \u003cli\u003eAdditional references: 8195729, 856842, B95749, SG214012\u003c\/li\u003e\n  \u003cli\u003eIf unsure, remove the old strut and check the stamped or printed part number\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow hard is installation and what tools are required?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is intentionally simple so you can replace the struts yourself and avoid dealer labor. Most users can complete the swap in about five minutes per strut using only a screwdriver or a basic set of hand tools; no hydraulic bleeding or special equipment is necessary.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTypical install time: about 5 minutes per side\u003c\/li\u003e\n  \u003cli\u003eTools needed: screwdriver or small ratchet set depending on clip type\u003c\/li\u003e\n  \u003cli\u003eNo professional mechanic required — straightforward clip and ball-socket removal\u003c\/li\u003e\n  \u003cli\u003eInstructions: remove old strut, align ball studs, press on new strut ends until they click\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and service life should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eWith proper fit and installation, ARANA struts are made to last significantly longer than economy replacements thanks to stronger steel and improved seals. Performance can vary with exposure to road salt or extreme off-road conditions, but routine visual checks are all that’s typically needed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned for 50,000+ compression cycles under normal use\u003c\/li\u003e\n  \u003cli\u003eInspect annually for leaks, pitting, or damaged mounts\u003c\/li\u003e\n  \u003cli\u003eResists pressure loss in wide temperature ranges for year-round use\u003c\/li\u003e\n  \u003cli\u003eARANA offers 365-day after-sale support for fit or performance questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Jeep owners with a 1997–2006 Wrangler TJ who want a dependable, budget-friendly OEM-fit rear window\/hatch lift solution that avoids costly dealer labor. This set suits DIYers who prefer quick installation, drivers in varied climates who need corrosion resistance and thermal stability, and anyone replacing failed or leaking factory struts who wants long-lasting materials and easy compatibility checks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts fit all 1997–2006 Jeep Wrangler TJ models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are designed for TJ models within 1997–2006, but verify by matching your current strut’s OEM number to the listed references before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these myself without special tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Typical installation takes about five minutes per strut and usually only requires a screwdriver or simple hand tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55166671552855,"sku":"B00Z2CXFLW","price":37.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-rear-window-struts-front-view-packaging.jpg?v=1790369944"},{"product_id":"arana-dodge-challenger-rear-trunk-struts-no-spoiler-2008-2020-pair-oem-fit-corrosion-resistant","title":"ARANA Dodge Challenger Rear Boot Struts (No Spoiler) 2008–2020 — Pair, OEM Fit \u0026 Corrosion‑Resistant","description":"\u003cp\u003e\u003cstrong\u003eThese two ARANA hydraulic trunk struts replace the rear hatch lift supports on Dodge Challenger models without a spoiler from 2008 to 2020, restoring smooth, reliable opening and secure hold.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your Challenger's rear hatch drops, squeaks, or no longer stays open, worn gas struts are the usual culprit. ARANA's replacement pair is engineered to match OEM fit and performance while costing a fraction of dealer prices. Built from Grade 45 high-carbon steel with multi-layer chrome plating and durable hydraulic fluid, these struts are designed to resist corrosion, leaks, and pressure loss across extreme temperatures.\u003c\/p\u003e\n\n\u003ch3\u003eWill these ARANA struts fit my Dodge Challenger without a spoiler?\u003c\/h3\u003e\n\u003cp\u003eThey are made for Challenger models that do not have a rear spoiler and cover a wide range of trims and years. Before purchasing, compare the part numbers printed on your original struts to the OEM references listed; that ensures a direct swap without adapters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment: Dodge Challenger Base\/R\/T\/SXT\/SXT Plus (2008–2020)\u003c\/li\u003e\n  \u003cli\u003eSpecific trims included: Black Line (2015–2020), R\/T Classic\/Rallye Redline\/SE\/SRT8 (2008–2016)\u003c\/li\u003e\n  \u003cli\u003eSRT variants: SRT (2011–2012, 2014, 2016–2020), SRT 392\/SRT Hellcat (2015–2020)\u003c\/li\u003e\n  \u003cli\u003eOEM numbers to verify: 96657, 04589645AA, 04589645AB, 244263, 244502, and equivalents\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these struts for year-round driving?\u003c\/h3\u003e\n\u003cp\u003eARANA builds these supports from industrial-grade 45# high-carbon steel and applies multi-layer chrome plating to fight rust and abrasion. The hydraulic oil and seals are selected to withstand a broad temperature range so they maintain pressure and avoid leaks in hot summers and cold winters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTemperature range: performs reliably from -40°F to 110°F\u003c\/li\u003e\n  \u003cli\u003eLongevity: engineered for 50,000+ compression cycles without noticeable force loss\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistance: mirror chrome plating reduces oxidation in wet climates\u003c\/li\u003e\n  \u003cli\u003eSeals and fluid: wear-resistant hydraulic oil to minimize leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install the ARANA struts myself, and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eYes—installation is straightforward and accessible for a DIYer. Most replacements take about five minutes per side and require only basic hand tools such as a flathead screwdriver to pop the ball-socket clips free and secure the new strut.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEstimated time: roughly 5 minutes per strut for most users\u003c\/li\u003e\n  \u003cli\u003eTools: common screwdriver; no special presses or lifts\u003c\/li\u003e\n  \u003cli\u003eInstructions: ball-socket ends match OEM mounting points for quick swap\u003c\/li\u003e\n  \u003cli\u003eSave money: no dealer labor costs needed for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty or post-purchase support does ARANA provide?\u003c\/h3\u003e\n\u003cp\u003eARANA backs these struts with a 365-day support policy so you can request help if problems arise after delivery. Customer service assistance helps confirm fitment, troubleshoot installation, or address defects during the first year.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupport window: 365 days of post-purchase assistance\u003c\/li\u003e\n  \u003cli\u003eHelp available: fitment verification and installation guidance\u003c\/li\u003e\n  \u003cli\u003eReplacement options: reach out if units arrive damaged or fail early\u003c\/li\u003e\n  \u003cli\u003eReturn guidance: ARANA's team will advise on next steps promptly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This replacement set is ideal for Dodge Challenger owners (2008–2020) without a rear spoiler who want a cost-effective OEM-style solution that restores confident hatch operation. It's well suited for DIY enthusiasts looking to avoid dealer fees, drivers in extreme climates who need reliable seals and hydraulics, and anyone replacing leaky or weak factory struts. Confirm the part number on your existing struts or check compatibility with your vehicle's trim and year before ordering to ensure a direct, hassle-free fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts fit Challengers with a spoiler?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These ARANA struts are designed specifically for Dodge Challengers without a rear spoiler—verify fitment against your factory part number.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long will the struts last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Manufactured for durability, they’re rated for over 50,000 cycles and resist temperature extremes and corrosion under normal use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55166686921047,"sku":"B0DHQVQ44K","price":37.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-rear-trunk-struts-front-view.jpg?v=1790370182"},{"product_id":"arana-hood-struts-for-hyundai-santa-fe-2013-2019-2-piece-oem-fit-quick-lift-durable-chrome-plated","title":"ARANA Bonnet Struts for Hyundai Santa Fe 2013-2019 — 2-Piece OEM-Fit Quick Lift, Durable Chrome-Plated","description":"\u003cp\u003e\u003cstrong\u003eARANA Quick Lift Hood Struts are a direct OEM-fit replacement set (2 pieces) that restore smooth, reliable front-hood lift for Hyundai Santa Fe models from 2013–2019.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement gas struts are engineered to match the factory fit and performance for the Santa Fe, letting you open and hold the hood securely without the original supports sagging or failing. Built from high-carbon steel with multi-layer chrome plating and premium hydraulic fluid, the pair offers long life, all-weather reliability, and a simple homeowner-friendly install that avoids dealer labor charges.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these struts change hood operation?\u003c\/h3\u003e\n\u003cp\u003eInstall the ARANA struts and the hood will lift smoothly, stay in the open position, and close controllably instead of dropping or requiring a prop rod. They restore the original factory feel and help prevent accidental slams when working under the hood.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides consistent upward force to hold hood open\u003c\/li\u003e\n  \u003cli\u003eReduces effort required to lift the hood\u003c\/li\u003e\n  \u003cli\u003ePrevents sudden drops and improves safety for maintenance\u003c\/li\u003e\n  \u003cli\u003eOEM part numbers compatible for correct fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these struts durable in extreme climates?\u003c\/h3\u003e\n\u003cp\u003eYes — ARANA uses Grade 45 high-carbon steel, multi-layer chrome plating, and wear-resistant hydraulic oil to resist leaks and corrosion. They are rated to function across a wide temperature range so performance remains stable from cold winters to hot summers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperates reliably from -40°F to 110°F\u003c\/li\u003e\n  \u003cli\u003eMirror chrome plating wards off rust and oxidation\u003c\/li\u003e\n  \u003cli\u003eDurable seals and hydraulic fluid reduce pressure loss\u003c\/li\u003e\n  \u003cli\u003eEngineered for 50,000+ compression cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow hard is installation and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and can be completed in about five minutes with just a screwdriver and basic caution. These struts are supplied as a 2-piece set that directly replaces the factory components when the OEM part numbers match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo professional mechanic required — DIY-friendly\u003c\/li\u003e\n  \u003cli\u003eSimple clip or bolt-on attachment depending on your Santa Fe model\u003c\/li\u003e\n  \u003cli\u003eInstructions and OEM part numbers provided for verification\u003c\/li\u003e\n  \u003cli\u003eSave dealer labor costs with a quick at-home swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Hyundai part numbers should I check for compatibility?\u003c\/h3\u003e\n\u003cp\u003eConfirm the OEM numbers on your existing struts before ordering to ensure a proper match and avoid returns. ARANA lists common Hyundai part numbers for the 2013–2019 Santa Fe to help you verify fitment quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePart numbers to compare: SG367023, 96877, 81161B8000\u003c\/li\u003e\n  \u003cli\u003eAlso compatible identifiers: 81161-B8000, 816614Z000, 81661-4Z000\u003c\/li\u003e\n  \u003cli\u003eCompare printed or stamped numbers on your original struts first\u003c\/li\u003e\n  \u003cli\u003eContact ARANA support if you need help confirming fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: These ARANA Quick Lift Hood Struts are ideal for Hyundai Santa Fe owners (2013–2019) who want a cost-effective OEM-fit replacement that restores factory lift performance without dealer labor. Choose this set if you prefer a durable, weather-resistant solution built to last multiple years, want an easy DIY install, and need to confirm compatibility using your vehicle’s original part numbers. Backed by a 365-day support promise, the set suits drivers, home mechanics, and small shops looking to save on parts and service while maintaining safe, reliable hood operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these struts fit my 2016 Hyundai Santa Fe?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your existing strut’s part number against SG367023, 96877, 81161B8000, or listed equivalents to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most owners install the two struts in about five minutes with just a screwdriver and basic caution.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55166687641943,"sku":"B0CYLT9B42","price":38.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-quick-lift-hood-strut-front-view.jpg?v=1790370205"},{"product_id":"arana-hood-lift-struts-for-lexus-gx470-toyota-4runner-2003-2009-pair-oem-fit-high-strength-hydraulic","title":"ARANA Hood Lift Struts for Lexus GX470 \u0026 Toyota 4Runner 2003–2009 — Pair, OEM Fit, High-Strength Hydraulic","description":"\u003cp\u003e\u003cstrong\u003eHigh-strength hood lift struts engineered to replace factory units on Lexus GX470 and Toyota 4Runner (2003–2009), delivering smooth, reliable hood opening and secure hold.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your stock hood supports feel weak, noisy, or no longer hold the hood up, these ARANA replacement struts restore factory-style performance without the dealer price. Designed to match common OEM part numbers and fit patterns for the GX470 and 4Runner models listed, the pair arrives ready to swap in with basic tools and a short install time.\u003c\/p\u003e\n\n\u003ch3\u003eWill these struts fit my Lexus GX470 or Toyota 4Runner?\u003c\/h3\u003e\n\u003cp\u003eThese ARANA struts are manufactured to fit 2003–2009 Toyota 4Runner and Lexus GX470 hoods that use the listed OEM numbers. Before purchase, compare your current part numbers or mount style to the OEM references to confirm compatibility and avoid returns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatches common OEM part numbers: 95588, 36100, 534400W230, and others\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement mounting points for listed model years\u003c\/li\u003e\n  \u003cli\u003eSold as a matched pair for both sides of the hood\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these ARANA hood struts in extreme weather?\u003c\/h3\u003e\n\u003cp\u003eConstructed from Grade 45 high-carbon steel with multi-layer chrome plating and filled with wear-resistant hydraulic fluid, these struts are built for temperature extremes and repeated cycles. The materials and sealing reduce leakage and corrosion risk so the lift force stays consistent over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated to operate between -40°F and 110°F\u003c\/li\u003e\n  \u003cli\u003eMulti-layer chrome resists rust and oxidation\u003c\/li\u003e\n  \u003cli\u003eDesigned for 50,000+ compression cycles without noticeable force loss\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about five minutes per side for most DIYers. The struts use standard clip or ball-socket mounts that pop on and off with a small screwdriver or pliers—no specialty tools or professional service required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple pop-on ball-socket ends for quick swapping\u003c\/li\u003e\n  \u003cli\u003eOnly basic hand tools like a screwdriver recommended\u003c\/li\u003e\n  \u003cli\u003eInstructions included or available online for quick reference\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance improvements can I expect over worn factory supports?\u003c\/h3\u003e\n\u003cp\u003eReplacing tired or leaking factory struts restores smooth, controlled hood lift and secure hold at any open position, making engine access safer and more convenient. Users notice reduced sag, quieter operation, and the confidence that the hood will not drift closed while working beneath it.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother opening and consistent damping\u003c\/li\u003e\n  \u003cli\u003eImproved leak resistance and pressure retention\u003c\/li\u003e\n  \u003cli\u003eLonger service life compared with many budget alternatives\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ARANA hood struts are made for owners of 2003–2009 Toyota 4Runner and Lexus GX470 who want a cost-effective, durable replacement that matches OEM fit and function. Ideal if you're avoiding dealer labor, prefer a quick DIY swap, or need reliable performance across hot summers and cold winters without frequent replacements.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts match OEM part numbers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are made to align with common OEM numbers—compare your current part number to the list before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most users swap each strut in about five minutes using just a screwdriver or pliers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55166691901783,"sku":"B0CGHKVH64","price":36.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-front-packaging-hood-struts_45bf7187-2ee3-48aa-aba4-e7449b57fbba.jpg?v=1790370270"},{"product_id":"arana-trunk-struts-for-hyundai-tucson-2010-2015-non-power-2-pc-set-chrome-plated-temperature-stable","title":"ARANA Boot Struts for Hyundai Tucson 2010–2015 (Non-Power) — 2-Pc Set, Chrome-Plated \u0026 Temperature-Stable","description":"\u003cp\u003e\u003cstrong\u003eThese ARANA replacement trunk struts (2-piece set) restore reliable lift and hold for Hyundai Tucson models 2010–2015 without power tailgate.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Tucson's liftgate sags, won't stay open, or requires support when closing, worn gas struts are usually the cause. The ARANA 817712S000 trunk strut pair is a direct-fit aftermarket option designed for Base, GL, GLS, L, Limited, and SE Sport trims from 2010–2015 that lack a powered tailgate. Built for everyday driving and extreme climates, this affordable set offers an easy DIY swap to return smooth opening and steady support without dealer markup.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these struts perform in hot or cold weather?\u003c\/h3\u003e\n\u003cp\u003eARANA struts use grade 45 high-carbon steel and a wear-resistant hydraulic fluid formulated to resist pressure loss across wide temperatures. That construction helps the struts maintain consistent lift in summertime heat and cold winter conditions, reducing the chance of sagging or leaks compared with lower-grade units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperates reliably from -40°F to 110°F\u003c\/li\u003e\n  \u003cli\u003eMulti-layer chrome plating resists corrosion in wet climates\u003c\/li\u003e\n  \u003cli\u003ePressure-stable hydraulic oil minimizes performance drop in extremes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my Hyundai Tucson and how do I check compatibility?\u003c\/h3\u003e\n\u003cp\u003eThese ARANA struts are intended for non-powered Hyundai Tucson models from 2010 through 2015. To avoid ordering the wrong item, compare your original part number to the OEM-equivalent numbers listed by ARANA before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Hyundai Tucson 2010–2015 without power tailgate\u003c\/li\u003e\n  \u003cli\u003eVerify against OEM numbers: 762904, 817712S000, 817812S000, SG367021, PM2059\u003c\/li\u003e\n  \u003cli\u003eDesigned to replace factory-style ball-stud mounts for a direct fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will these trunk supports last and what are they made of?\u003c\/h3\u003e\n\u003cp\u003eARANA designs these struts for extended service life using industrial-grade materials and quality assembly. The combination of Grade 45 carbon steel, multi-layer chrome plating, and anti-wear hydraulic fluid delivers longevity and resistance to rust and wear under normal use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable 45# high-carbon steel construction\u003c\/li\u003e\n  \u003cli\u003eChromium plating and anti-corrosion finish for longer life\u003c\/li\u003e\n  \u003cli\u003eEngineered to withstand 50,000+ compression cycles without significant force loss\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and intended for most DIYers: remove the old struts and snap the new ones into place. No specialized tools or professional service are required for most installs, helping you save money and time compared to dealer replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEstimated install time: about 5 minutes per strut for one person\u003c\/li\u003e\n  \u003cli\u003eOnly a screwdriver or small pry tool typically required\u003c\/li\u003e\n  \u003cli\u003eIncludes two struts—one for each side of the liftgate\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These ARANA trunk struts are a practical choice for Hyundai Tucson owners (2010–2015) whose liftgate no longer holds open or exhibits slow, uneven movement. They suit budget-conscious drivers who prefer a reliable, long-lasting aftermarket replacement they can install themselves, and fleet or repair shops looking to keep operating costs down. Always confirm your vehicle’s original part number before ordering to ensure a correct fit. ARANA also provides a 365-day support policy should you need help after purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these fit Hyundai Tucson models with power tailgate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This ARANA set is for Tucson 2010–2015 models without a powered tailgate only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty or support does ARANA provide?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: ARANA offers 365 days of post-sale support—contact them if you have issues after delivery.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55166701338967,"sku":"B0DNQ4HZ1C","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-front-packaging-817712s000.jpg?v=1790370411"},{"product_id":"arana-rear-hatch-struts-for-kia-sorento-2016-2020-2-pc-set-no-power-chrome-plated-high-carbon","title":"ARANA Rear Hatch Struts for Kia Sorento 2016-2020, 2-Pc Set (No Power) — Chrome-Plated High-Carbon","description":"\u003cp\u003e\u003cstrong\u003eThese ARANA rear hatch struts are a direct, affordable replacement set engineered to restore smooth, reliable lift and hold for Kia Sorento 2016–2020 models without power liftgate.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a Sorento’s liftgate sags, slams shut, or won’t stay open, worn gas struts are often the culprit. ARANA’s two-piece replacement kit is built from high-carbon Grade 45 steel with multi-layer chrome plating and long-life hydraulic fluid to resist leaks, rust, and temperature-related performance loss. The set is offered as an easy DIY swap that matches common OEM part numbers for a hassle-free fit.\u003c\/p\u003e\n\n\u003ch3\u003eWill these struts fit my Sorento and how do I confirm compatibility?\u003c\/h3\u003e\n\u003cp\u003eThese struts are designed for 2016–2020 Kia Sorento models without a power liftgate and correspond to several OEM part numbers. Before ordering, compare the OEM numbers on your original struts with the list below to make sure you receive the correct replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatches these OEM numbers: 259833, 81771C5000, 81771C5001, 81771C6000, 81781C5000, 81781C5001, 81781C6000, PM3350.\u003c\/li\u003e\n  \u003cli\u003eIntended for Base\/EX\/L\/LX\/Limited\/SX trims with manual hatch only.\u003c\/li\u003e\n  \u003cli\u003eMeasure length and ball-stud locations if in doubt to confirm fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are ARANA lift supports in extreme weather?\u003c\/h3\u003e\n\u003cp\u003eThese struts are built to perform consistently across a wide temperature range using wear-resistant hydraulic oil and chrome plating that reduces corrosion. Independent design choices extend service life and reduce the chance of sudden failure in hot summers or freezing winters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated to operate reliably from −40°F to 110°F.\u003c\/li\u003e\n  \u003cli\u003eMulti-layer chrome plating resists rust and surface wear.\u003c\/li\u003e\n  \u003cli\u003eHydraulic fluid and seals engineered to limit leaks and pressure loss.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install the ARANA struts myself, and how long does it take?\u003c\/h3\u003e\n\u003cp\u003eYes — this kit is aimed at DIYers and can typically be installed in about five minutes using just a screwdriver. The design uses standard ball-stud fittings that snap on and off, avoiding the need for special tools or dealer service appointments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick, tool-light installation — screwdriver often sufficient.\u003c\/li\u003e\n  \u003cli\u003eNo specialized mechanical skills required; ideal for a garage replacement.\u003c\/li\u003e\n  \u003cli\u003eComes as a two-piece set to replace both hatch supports at once.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will these replacement struts last compared with OEM units?\u003c\/h3\u003e\n\u003cp\u003eARANA uses industrial 45# high-carbon steel and premium hydraulic fluid to withstand tens of thousands of cycles before noticeable force loss. While exact lifespan varies by use and environment, the construction targets extended service life versus bargain replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to endure 50,000+ compression cycles without significant force loss.\u003c\/li\u003e\n  \u003cli\u003eSeals and plating reduce oxidation and leak risk over time.\u003c\/li\u003e\n  \u003cli\u003eBacked by a 365-day customer support period for post-purchase concerns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own a 2016–2020 Kia Sorento without a powered liftgate and want a solid, low-cost replacement that restores safe hatch operation. It’s especially suited to owners who prefer a quick DIY fix, people in regions with severe temperatures seeking reliable performance, and anyone wanting to avoid dealer labor costs. Verify OEM part numbers before purchase to ensure correct fit, and contact ARANA support within 365 days if any issues arise.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts fit power liftgate Sorento models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These ARANA struts are for Sorento models without a power liftgate. Check OEM numbers to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is any special tool required for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typically no. Most installs use a screwdriver and the ball-stud fittings snap on, finishing in about five minutes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55166704320855,"sku":"B0DRYJLKP1","price":36.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-rear-hatch-strut-front-packaging_15481e2c-436c-4f43-a736-0df0e2d303e2.jpg?v=1790370450"},{"product_id":"arana-rear-hatch-struts-for-chevy-suburban-tahoe-gmc-yukon-2007-2014-oem-fit-pair-quick-install","title":"ARANA Rear Hatch Struts for Chevy Suburban Tahoe GMC Yukon 2007-2014 — OEM-Fit Pair, Quick-Install","description":"\u003cp\u003e\u003cstrong\u003eThese two ARANA rear hatch gas struts replace worn lift supports on 2007–2014 Chevrolet Suburban, Tahoe, GMC Yukon and Cadillac Escalade models to restore smooth, secure liftgate operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your liftgate sags, closes unexpectedly, or requires a prop rod, these ARANA OEM-fit struts are engineered to match factory geometry and restore proper lift and hold. They are sold as a pair and replace factory part numbers 22743451 and 6156, delivering a direct-fit replacement that installs in minutes without special tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly can I replace my old hatch struts?\u003c\/h3\u003e\n\u003cp\u003eReplacement is designed to be fast and straightforward for DIYers. With the original mounting points exposed, the struts snap off and new ones snap on in most cases, letting you finish the job in under five minutes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePush-button or clip-style mounts for simple removal\u003c\/li\u003e\n  \u003cli\u003eNo special tools or welding required\u003c\/li\u003e\n  \u003cli\u003eTypical install time: under 5 minutes per strut\u003c\/li\u003e\n  \u003cli\u003eStep-by-step guidance available from ARANA support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these struts hold my heavy liftgate securely?\u003c\/h3\u003e\n\u003cp\u003eYes — the ARANA units are built to supply steady, reliable lifting force so the hatch remains open without a prop. They are tuned to support heavier factory liftgates found on SUVs and carry the pressure retention needed for safe use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConsistent gas pressure prevents sudden sagging\u003c\/li\u003e\n  \u003cli\u003eSmooth extension and retraction for controlled movement\u003c\/li\u003e\n  \u003cli\u003eEngineered to match OEM lift characteristics\u003c\/li\u003e\n  \u003cli\u003eSold in a matched pair for balanced support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these hatch struts durable in extreme weather?\u003c\/h3\u003e\n\u003cp\u003eARANA constructs these struts from Grade 45 high-carbon steel with multi-layer chrome plating and wear-resistant hydraulic oil, so they resist leaks, corrosion and pressure loss across wide temperatures. They’re designed to perform in both very cold and very hot climates without accelerated wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperates reliably from -40°F to 110°F\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant chrome surface for long life\u003c\/li\u003e\n  \u003cli\u003eBuilt to withstand 50,000+ compression cycles\u003c\/li\u003e\n  \u003cli\u003eSeals and fluid formulated to reduce leakage over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers do these struts fit?\u003c\/h3\u003e\n\u003cp\u003eThese ARANA struts are made for a wide range of full-size GM SUVs and replace specific factory part numbers for a hassle-free swap. Confirm compatibility by cross-checking your vehicle year and model.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2007–2014 Chevrolet Suburban (Base\/1500\/2500)\u003c\/li\u003e\n  \u003cli\u003e2007–2014 Chevrolet Tahoe (Base\/LS\/LT\/LTZ\/PPV\/SSV\/Z71\/Hybrid)\u003c\/li\u003e\n  \u003cli\u003e2007–2014 GMC Yukon (Base\/Denali\/Hybrid\/SLE\/SLT\/XL)\u003c\/li\u003e\n  \u003cli\u003e2007–2014 Cadillac Escalade (Base\/Hybrid\/Premium\/ESV)\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers: 22743451, 6156\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Vehicle owners who drive full-size GM SUVs from 2007 to 2014 and want a reliable, cost-effective replacement for worn lift supports. It’s ideal for DIY mechanics and anyone seeking an OEM-fit upgrade that restores convenience and safety without dealer-level pricing. ARANA backs the product with a 365-day support promise, making it a practical choice for drivers who demand durable performance and straightforward installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these ARANA struts fit my 2010 Chevy Tahoe?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These fit 2007–2014 Tahoe models, including LT and LS trims; they replace OEM numbers 22743451 and 6156.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the struts myself without special tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Installation is designed to be tool-free or use basic hand tools and typically takes under five minutes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55166705631575,"sku":"B0FFGHTGLZ","price":39.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-front-packaging-view.jpg?v=1790370490"},{"product_id":"arana-rear-window-struts-for-jeep-wrangler-1997-2006-2-piece-oem-fit-direct-replacement-corrosion-resistant","title":"ARANA Rear Window Struts for Jeep Wrangler 1997–2006 — 2‑Piece OEM‑Fit, Direct Replacement, Corrosion‑Resistant","description":"\u003cb\u003eThese ARANA rear window struts are direct-fit replacement gas supports designed to restore smooth, safe opening and secure holding of the Jeep Wrangler rear liftgate for 1997–2006 models.\u003c\/b\u003e\n\n\u003cp\u003eIf your Wrangler’s rear window sags, doesn’t stay open, or is hard to lift, worn gas struts are the usual cause. ARANA engineered this two-piece set for an OEM-style fit to the 1997–2006 Jeep Wrangler family — including Base, SE, Sahara, Sport, Unlimited and later Rubicon\/X variants listed — so you can replace failed supports quickly and get dependable lift performance again.\u003c\/p\u003e\n\n\u003ch3\u003eWill these struts fit my Jeep Wrangler and replace the original part?\u003c\/h3\u003e\n\n\u003cp\u003eYes — these struts are sized and mounted to match factory geometry for compatible Wrangler years and trims. They are intended to replace part numbers AVM 16403; always cross-check the vehicle list or your original part number before ordering to confirm fitment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOEM-style mount points for direct replacement without modification\u003c\/li\u003e\n  \u003cli\u003eFits 1997–2006 Wrangler Base\/SE\/Sahara\/Sport\/Unlimited\u003c\/li\u003e\n  \u003cli\u003eAlso fits 2003–2006 Rubicon and 2002–2006 Wrangler X models\u003c\/li\u003e\n  \u003cli\u003eCompare your current part number (AVM 16403) to ensure match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow hard is installation — can I do it myself?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is a straightforward, quick DIY job that most owners can complete in under five minutes. The struts use simple pop-on ball sockets; remove the old, failing supports and snap the new units into place with no specialized tools required.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTypical installation time: about 5 minutes per side\u003c\/li\u003e\n  \u003cli\u003eNo drilling, welding or special tools needed\u003c\/li\u003e\n  \u003cli\u003eClear, repeatable attachment using factory ball studs\u003c\/li\u003e\n  \u003cli\u003ePerfect for at-home replacement or roadside convenience\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability can I expect from these ARANA struts?\u003c\/h3\u003e\n\n\u003cp\u003eARANA struts are designed for reliable lifting force and long service life under varied conditions. Built from Grade 45 high-carbon steel with multi-layer chrome plating and premium anti-wear hydraulic fluid, they resist leaks, corrosion and pressure loss so the liftgate stays supported in extremes from cold winters to hot summers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned to withstand -40°F to 110°F operating temperatures\u003c\/li\u003e\n  \u003cli\u003eOver 50,000 compression cycles without significant force loss\u003c\/li\u003e\n  \u003cli\u003eMirror chrome plating and rust-resistant construction\u003c\/li\u003e\n  \u003cli\u003eHydraulic oil formulation for leak resistance and smooth action\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose these aftermarket struts over OEM dealership replacements?\u003c\/h3\u003e\n\n\u003cp\u003eThis ARANA set offers a cost-effective solution that restores safety and convenience without the premium dealer price. You get durable materials, reliable lifting power and a direct-fit design backed by a 365-day support window — a practical alternative to expensive factory parts.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLower cost than many dealer parts with comparable durability\u003c\/li\u003e\n  \u003cli\u003eQuick DIY swap avoids service shop labor fees\u003c\/li\u003e\n  \u003cli\u003eCustomer support and one-year coverage for peace of mind\u003c\/li\u003e\n  \u003cli\u003eRestores safe operation so you don’t need a prop rod or risk slippage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Jeep owners whose 1997–2006 Wrangler rear liftgate or window no longer holds open, feels heavy, or shows oil residue on worn supports. It’s ideal for do-it-yourself drivers who want a fast, reliable replacement that mimics OEM fit and performance without dealer pricing. Whether you use your Wrangler for daily driving, trail work, or weekend projects, these ARANA struts return safe, smooth lift action and long-term durability so you can load, unload, and service the rear cargo area with confidence.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts fit my 2004 Jeep Wrangler Sahara?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. ARANA rear window struts are OEM-fit for 2004 Wrangler Sahara; verify AVM 16403 match to be certain.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I replace both struts myself without tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These pop-on struts install in about five minutes per side with no special tools required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55166706024791,"sku":"B0FFGJ665C","price":37.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-rear-window-struts-front-packaging.jpg?v=1790370513"},{"product_id":"arana-quick-lift-hood-struts-for-lexus-rx350-rx450h-2010-2015-oem-fit-corrosion-resistant-chrome","title":"ARANA Quick Lift Bonnet Struts for Lexus RX350 RX450h 2010–2015 — OEM-fit, Corrosion-Resistant Chrome","description":"\u003cp\u003e\u003cstrong\u003eARANA Quick Lift Hood Struts are direct replacement gas-supported hood lifts engineered to fit 2010–2015 Lexus RX350 and RX450h models, delivering smooth, reliable hood support and quick tool-free installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese hood struts are manufactured to OEM-style specifications so they match factory fitment and restoring proper hood operation on applicable Lexus RX models. Built from high-carbon steel with multi-layer chrome plating and premium hydraulic fluid, they’re designed to resist corrosion and keep consistent pressure across wide temperature ranges. The set replaces common OEM part numbers and aims to bring back stable, effortless hood opening without relying on a prop rod.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these struts fit my 2010–2015 Lexus RX350 or RX450h?\u003c\/h3\u003e\n\u003cp\u003eARANA struts are cut and terminated to match the factory mounting points used on RX350 (Base\/F\/Sportdesign Sport) and RX450h (Base\/Sport) for model years 2010–2015. They replace multiple OEM part numbers, so they’re compatible with most original hood hardware layouts for those years.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect OEM-style fit—no bracket modification required.\u003c\/li\u003e\n  \u003cli\u003eReplaces part numbers such as 53450-0W170 and 53440-0W200.\u003c\/li\u003e\n  \u003cli\u003eCheck your vehicle against the full model list to confirm compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is the installation process?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed for quick, tool-free replacement in most cases—swap the worn supports for the ARANA units in roughly five minutes. The struts use standard ball-socket ends that snap onto factory studs, so even basic DIYers can complete the job without specialized equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical install time: under 5 minutes per side.\u003c\/li\u003e\n  \u003cli\u003eNo cutting, drilling, or custom brackets required.\u003c\/li\u003e\n  \u003cli\u003eBall-socket ends snap on and remove easily for future servicing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eThese hood lifts are built from Grade 45 high-carbon steel with mirror chrome plating and filled with wear-resistant hydraulic oil for stable pressure and long life. They’re engineered to withstand extreme temperatures and deliver consistent lift force throughout an extended service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated to perform between -40°F and 110°F without significant pressure loss.\u003c\/li\u003e\n  \u003cli\u003eMulti-layer chrome finish resists rust and oxidation in humid or salty environments.\u003c\/li\u003e\n  \u003cli\u003eEngineered for 50,000+ compression cycles to reduce replacement frequency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these remove the need for a hood prop or reduce safety concerns?\u003c\/h3\u003e\n\u003cp\u003eWhen installed correctly, ARANA struts hold the hood open securely so you no longer need a manual prop rod during routine maintenance. They are designed to prevent sudden slippage that can create hazards, but always verify correct operation after installation and support the hood if any play or leakage appears.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides steady support to eliminate a separate prop rod under normal conditions.\u003c\/li\u003e\n  \u003cli\u003eReduces risk of unexpected closure compared with worn OE struts.\u003c\/li\u003e\n  \u003cli\u003eAlways inspect mounts and seals for leaks or wear before trusting long-term.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These ARANA Quick Lift Hood Struts are ideal for Lexus RX350 and RX450h owners (2010–2015) who want a direct-fit replacement for failing factory struts. They suit DIY mechanics, independent shops, and owners seeking a corrosion-resistant, long-life solution that restores safe, smooth hood operation. If your hood is heavy, drops unexpectedly, or the original supports are leaking or weak, these struts offer an OEM-style upgrade engineered for reliable everyday use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts fit my 2012 Lexus RX350?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—ARANA struts are OEM-style replacements for 2010–2015 RX350 models; confirm with your VIN or part numbers listed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these without special tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—installation typically takes under five minutes per side and uses snap-on ball sockets with no special tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55166706123095,"sku":"B0F9L6D6FJ","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-front-packaging-assembly.jpg?v=1790370511"},{"product_id":"arana-tailgate-assist-soft-open-for-ford-f-150-lincoln-mark-lt-2004-2014-gas-spring-dampener-no-drill-fit","title":"ARANA Tailgate Assist Soft Open for Ford F-150 \u0026 Lincoln Mark LT (2004–2014) — Gas-Spring Dampener, No-Drill Fit","description":"\u003cp\u003e\u003cstrong\u003eARANA Tailgate Assist Soft Open is a gas-spring dampener kit that slows and controls the heavy tailgate drop on 2004–2014 Ford F150 and 2006–2008 Lincoln Mark LT models for safer, quieter operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your truck’s tailgate slams down or feels too heavy to lower smoothly, this ARANA retrofit uses industrial-grade gas spring technology and a precision-shaped mount to create controlled, linear tailgate opening and closing. Designed to match the dimensions and mounting points of 2004–2014 Ford F150 (including XL, XLT, Lariat, Platinum, King Ranch and EcoBoost variants) and 2006–2008 Lincoln Mark LT, it installs with OEM-style bolts for a clean, no-drill fit. The kit aims to reduce noise, limit sudden drops and make single-person loading and unloading easier.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the ARANA Tailgate Assist improve tailgate operation?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit replaces the uncontrolled free-fall of many stock truck tailgates with a dampened, consistent descent. By applying a calibrated gas spring, it prevents sudden slams and gives you a predictable opening motion for safer handling around people and cargo.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLinear dampening for steady tailgate descent\u003c\/li\u003e\n  \u003cli\u003eReduces loud impact noises and sharp slams\u003c\/li\u003e\n  \u003cli\u003eMakes one-person lowering and loading more manageable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my vehicle and require body modifications?\u003c\/h3\u003e\n\n\u003cp\u003eARANA’s kit is engineered to fit specific model years and trims without altering the truck’s sheetmetal. The bracket is molded to match tailgate contours and uses factory-style bolts, so no drilling or paint damage is required during installation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFitment: 2004–2014 Ford F150 and 2006–2008 Lincoln Mark LT\u003c\/li\u003e\n  \u003cli\u003eCompatible trims: XL, XLT, Lariat, Platinum, King Ranch, EcoBoost\u003c\/li\u003e\n  \u003cli\u003eNo drilling; mounts with OEM bolt locations and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow hard is it to install and what tools are included?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is designed to be fast and user-friendly; most users can complete the job in about ten minutes. ARANA supplies the necessary installation hardware and tools, but you will need to remove the tailgate bottle opener on the driver’s side with your own tool before fitting the dampener.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTypical installation time: ~10 minutes\u003c\/li\u003e\n  \u003cli\u003eIncludes mounting hardware and basic tools in the kit\u003c\/li\u003e\n  \u003cli\u003eDriver-side bottle opener removal required prior to install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and performance features does the kit use?\u003c\/h3\u003e\n\n\u003cp\u003eThe dampener uses a high-strength 45# carbon steel gas spring for durability and consistent force over time. Components are designed to withstand truck use and to replicate OEM aesthetics and mounting, so operation feels factory-like.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIndustrial-grade gas spring construction for long life\u003c\/li\u003e\n  \u003cli\u003e45# carbon steel rod and precise molding for secure fit\u003c\/li\u003e\n  \u003cli\u003eEngineered to deliver smooth, predictable damping performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ARANA Tailgate Assist is for Ford F150 and Lincoln Mark LT owners from the listed years who want a safer, quieter, and more user-friendly tailgate without modifying their truck. It’s ideal for drivers who load cargo often, work alone, or simply want to upgrade a heavy factory tailgate to a controlled, OEM-like operation with quick installation and one-year support from ARANA.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it require drilling into my truck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No drilling is needed; the kit mounts using existing OEM bolt locations and included hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installs take about 10 minutes, though you must remove the driver-side bottle opener first using your own tool.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55166709236055,"sku":"B0D7Z1HN3N","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-tailgate-assist-front-view_af44d3d5-b137-48d3-b8d1-7246902b9584.jpg?v=1790370606"},{"product_id":"arana-hood-struts-for-dodge-ram-1500-2500-3500-2009-2020-pair-oem-fit-chrome-plated-durability","title":"ARANA Bonnet Struts for Dodge Ram 1500\/2500\/3500 (2009–2020) — Pair, OEM Fit \u0026 Chrome-Plated Durability","description":"\u003cp\u003e\u003cstrong\u003eThese ARANA hood struts are a direct-fit, two-piece replacement designed to restore smooth, reliable hood lift on Dodge Ram 1500, 2500 and 3500 trucks from model years 2009–2020.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a factory hood lift weakens, it makes engine access awkward and can pose a safety risk. ARANA engineered these replacement gas struts to match OEM fitment and performance so you can swap the worn originals quickly and get the hood opening and staying open like new. They come as a pair, are built from high-carbon steel with multi-layer chrome plating, and use wear-resistant hydraulic fluid for long life across wide temperature ranges.\u003c\/p\u003e\n\n\u003ch3\u003eWill these struts fit my Dodge Ram model and how do I confirm compatibility?\u003c\/h3\u003e\n\n\u003cp\u003eThey are made to replace factory steel-hood struts on Ram 1500 (2009–2020), Ram 2500 (2009–2018) and Ram 3500 (2011–2016) across all cab styles and trims. Before ordering, compare the OEM part number on your current struts to the compatible numbers ARANA lists to avoid a mismatch.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible OEM numbers: 5160343, 5160343AA, 765288, PM3420, SG314074\u003c\/li\u003e\n  \u003cli\u003eWorks with factory steel hood applications only\u003c\/li\u003e\n  \u003cli\u003eSold as a pair (driver and passenger side)\u003c\/li\u003e\n  \u003cli\u003eCheck your current strut’s part number before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these aftermarket hood supports in extreme weather?\u003c\/h3\u003e\n\n\u003cp\u003eARANA struts use Grade 45 high-carbon steel and mirror chrome plating to resist corrosion, while premium anti-wear hydraulic fluid sustains pressure across a wide temperature range. They’re specified to perform from -40°F to 110°F and are tested for tens of thousands of compression cycles to reduce early failures from weather or repeated use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eGrade 45 carbon steel construction with multi-layer plating\u003c\/li\u003e\n  \u003cli\u003eWear-resistant hydraulic oil for stable pressure and leak resistance\u003c\/li\u003e\n  \u003cli\u003eRated for -40°F to 110°F operating temperatures\u003c\/li\u003e\n  \u003cli\u003eDesigned to exceed 50,000 compression cycles without force loss\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation — do I need special tools or a mechanic?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is intentionally straightforward: these are direct-replacement struts that install in about five minutes using only basic hand tools like a flat-head screwdriver. No welding, drilling, or special tools required, so most owners can complete the swap themselves and avoid dealer labor charges.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect OEM-style mount points for quick swap\u003c\/li\u003e\n  \u003cli\u003eTypical install time: ~5 minutes for both sides\u003c\/li\u003e\n  \u003cli\u003eOnly a screwdriver or small pry tool is usually required\u003c\/li\u003e\n  \u003cli\u003eNo professional installation needed for competent DIYers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and after-sales support does ARANA provide?\u003c\/h3\u003e\n\n\u003cp\u003eARANA offers a 365-day worry-free service policy to address any issues that arise after purchase. If you receive a defective item or need assistance with fitment, their customer service is available to help with replacements or guidance through the claims process.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e365-day post-purchase support for product issues\u003c\/li\u003e\n  \u003cli\u003eCustomer service available for fitment questions or replacements\u003c\/li\u003e\n  \u003cli\u003eClear OEM part numbers listed to reduce wrong-fit returns\u003c\/li\u003e\n  \u003cli\u003eBuilt and tested for long-term service life to minimize hassles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This two-piece ARANA hood strut set is aimed at Dodge Ram owners who have weakened or leaking factory struts and want an affordable, OEM-compatible replacement. It’s ideal for do-it-yourselfers who prefer a fast, low-cost fix without dealer labor, fleet managers seeking consistent aftermarket reliability, and anyone who needs a weather-resistant, long-lasting hood support for regular engine access.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these ARANA struts match OEM part numbers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are compatible with OEM numbers 5160343, 5160343AA, 765288, PM3420, and SG314074. Verify your current part number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these hood struts myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Typical installation takes about five minutes per side with a screwdriver—no special tools or mechanic required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55166801543511,"sku":"B08FDK3SVX","price":37.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-hood-struts-front-packaging_35847627-21a5-4217-b360-f81283506e0f.jpg?v=1790371483"},{"product_id":"arana-rear-hatch-struts-for-dodge-grand-caravan-2001-2007-2-piece-oem-fit-chrome-plated-durable-lift-support","title":"ARANA Rear Hatch Struts for Dodge Grand Caravan 2001-2007 — 2-Piece OEM-Fit, Chrome-Plated Durable Lift Support","description":"\u003cp\u003e\u003cstrong\u003eThese ARANA rear hatch struts are a direct OEM-fit replacement set (2 pieces) designed to restore smooth, reliable lift support to 2001–2007 Dodge Grand Caravan and compatible Chrysler minivans.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your liftgate no longer holds open, drops unexpectedly, or moves sluggishly, worn gas struts are usually the culprit. ARANA engineered this two-piece kit to match common OEM part numbers used on Dodge Grand Caravan, Dodge Caravan, Chrysler Town \u0026amp; Country, and Chrysler Voyager models from 2001 to 2007. The goal is a low-cost, durable alternative that installs quickly and gives you back safe, controlled hatch operation.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these struts restore hatch performance?\u003c\/h3\u003e\n\u003cp\u003eThe ARANA struts replace aging or leaking original gas springs to reestablish steady lift and hold. They use premium hydraulic oil and mirror chrome-plated high-carbon steel to maintain pressure and resist wear across many cycles. Expect consistent opening speed and secure holding without jerks or sudden drops.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to meet OEM-style damping for balanced lift\u003c\/li\u003e\n  \u003cli\u003eMirror chrome finish reduces friction and corrosion\u003c\/li\u003e\n  \u003cli\u003eDesigned for 50,000+ compression cycles for long service life\u003c\/li\u003e\n  \u003cli\u003eIncludes two struts for complete hatch support replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these struts weatherproof and durable?\u003c\/h3\u003e\n\u003cp\u003eYes — ARANA built these struts to tolerate a wide temperature range and resist common failure modes like leakage and rust. The Grade 45 carbon steel body with multi-layer chrome plating and wear-resistant hydraulic fluid helps them perform reliably from extreme cold to intense heat. That durability lowers the chance you'll need repeat replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperates reliably between -40°F and 110°F\u003c\/li\u003e\n  \u003cli\u003eAnti-wear hydraulic fluid minimizes pressure loss and leakage\u003c\/li\u003e\n  \u003cli\u003eChrome plating protects against oxidation and road salt damage\u003c\/li\u003e\n  \u003cli\u003eIndustrial 45# high-carbon steel for strength under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and is installation difficult?\u003c\/h3\u003e\n\u003cp\u003eARANA provides the common OEM part numbers (for example: 95854, 04894554AC, 05054558AC and other variants) so you can verify compatibility before buying. The struts are made to match original mounting configurations for the 2001–2007 Dodge\/Chrysler minivans listed. Installation is simple and usually requires only a screwdriver, allowing most owners to swap them in about five minutes without professional help.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck included OEM numbers against your original strut for correct fit\u003c\/li\u003e\n  \u003cli\u003eTool-free or simple-screwdriver installation — no mechanic needed\u003c\/li\u003e\n  \u003cli\u003eTwo-piece set replaces both hatch supports for balanced operation\u003c\/li\u003e\n  \u003cli\u003eInstructions and basic safety tips included with the kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and customer support come with the kit?\u003c\/h3\u003e\n\u003cp\u003eARANA backs this product with a 365-day support window to address any performance questions or defects after delivery. That customer-first policy gives you a year to reach out for troubleshooting, replacements, or assistance if anything goes wrong. It's part of the brand's effort to offer a dependable budget alternative to dealership-priced parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e365-day customer support for post-purchase concerns\u003c\/li\u003e\n  \u003cli\u003eReplacement assistance if parts arrive damaged or fail early\u003c\/li\u003e\n  \u003cli\u003eClear contact path for installation or fitment questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a 2001–2007 Dodge Grand Caravan, Dodge Caravan, Chrysler Town \u0026amp; Country, or Chrysler Voyager and your rear hatch sags, moves too quickly, or won't stay open, this ARANA two-piece hatch strut kit is designed for you. It's ideal for drivers who want an affordable, long-lasting OEM-style replacement they can install themselves, avoid dealer labor charges, and regain safe, consistent hatch operation. Always verify the OEM part number on your original struts before purchase to ensure proper fit and function.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts fit my 2004 Dodge Grand Caravan?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Likely yes if your original strut number matches one listed (e.g., 04894554AC). Verify OEM numbers before ordering to ensure exact fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How hard is installation and what tools are needed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Installation typically takes about five minutes and usually requires only a screwdriver; no mechanic necessary.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55166832738647,"sku":"B0DKSY9GHS","price":52.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-rear-hatch-strut-front-view.jpg?v=1790372116"},{"product_id":"arana-trunk-struts-for-bmw-e90-2006-2011-2-pc-oem-fit-replacement-heavy-duty-steel","title":"ARANA Boot Struts for BMW E90 2006–2011 — 2-Pc OEM-Fit Replacement, Heavy-Duty Steel","description":"\u003cp\u003e\u003cstrong\u003eARANA trunk struts are OEM-fit gas lift supports engineered to replace worn or broken trunk supports on BMW E90 2006–2011 sedans with a quick, durable installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two replacement trunk struts from ARANA are made to match factory fitment and restore smooth, reliable lift and hold performance to the rear trunk lid of BMW 3 Series E90 models (323i, 325i, 328i, 330i, 335d, 335i, M3, xi, xDrive) produced between 2006 and 2011. Built with high-carbon Grade 45 steel, multi-layer chrome plating and wear-resistant hydraulic fluid, they resist corrosion and maintain pressure across wide temperature ranges. The pair ships ready to install and is intended as a direct swap for worn original struts, saving dealer labor and prolonging trunk life.\u003c\/p\u003e\n\n\u003ch3\u003eWill these struts fit my BMW E90 trunk?\u003c\/h3\u003e\n\u003cp\u003eYes—these ARANA struts are designed as direct-fit replacements for most 2006–2011 BMW E90 2- and 4-door sedans. Confirm fitment by comparing your original part number with the listed OEM references to avoid ordering the wrong item.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: 323i, 325i, 328i, 330i, 335d, 335i, M3, xi, xDrive\u003c\/li\u003e\n  \u003cli\u003eYears: 2006–2011 for E90 chassis\u003c\/li\u003e\n  \u003cli\u003eCheck OEM numbers: 96651, 01612390E, 034249, 10163005, 182304, 25331, 3539XC, 51 24 7 060 623, 51 24 7 250 308\u003c\/li\u003e\n  \u003cli\u003eTwo-piece set matches factory mounting points for a direct swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will these trunk lift supports last?\u003c\/h3\u003e\n\u003cp\u003eARANA builds these struts from industrial-grade 45# high-carbon steel and multi-layer chrome plating to resist rust and wear. They are filled with premium anti-wear hydraulic fluid and are rated to endure extensive compression cycles without noticeable force loss, offering long-term performance compared with generic replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable Grade 45 steel construction\u003c\/li\u003e\n  \u003cli\u003eMulti-layer chrome finish for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eRated for 50,000+ compression cycles under normal use\u003c\/li\u003e\n  \u003cli\u003eHydraulic oil formulated to resist leaks and pressure loss\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install these myself, and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eYes—installation is straightforward and typically takes five minutes per strut for anyone with basic hand tools. Most replacements require only a flathead screwdriver or small pry tool to release the ball-socket clips and swap the supports, with no specialist equipment or professional labor needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical install time: about 5–10 minutes for both struts\u003c\/li\u003e\n  \u003cli\u003eRequired tools: screwdriver or small pry tool\u003c\/li\u003e\n  \u003cli\u003eNo spring compressors or special tools required\u003c\/li\u003e\n  \u003cli\u003eInstructions: remove old clips, pop off ends, align and snap new struts into place\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these struts handle different climates?\u003c\/h3\u003e\n\u003cp\u003eThese ARANA struts are engineered for reliable operation from extreme cold to high heat thanks to their wear-resistant hydraulic fluid and plated steel construction. They minimize leak risk and retain lift force in both subzero and hot environments, making them suitable for year-round use in varied climates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperational range: approximately -40°F to 110°F\u003c\/li\u003e\n  \u003cli\u003eHydraulic fluid resists viscosity changes and leaks\u003c\/li\u003e\n  \u003cli\u003eChrome plating slows rust in humid or salty conditions\u003c\/li\u003e\n  \u003cli\u003eDesigned for consistent pressure and smooth motion across temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ARANA’s OEM-fit trunk strut set is aimed at BMW E90 owners who want a cost-effective, long-lasting replacement that restores factory lift performance without paying dealer prices. It’s ideal for DIYers, budget-conscious drivers, and anyone replacing failing or sagging trunk supports on 2006–2011 BMW 3 Series sedans who values durable materials, straightforward installation, and verified part-number compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts match OEM part numbers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Compare your original number against listed OEM references to ensure correct fit before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is professional installation required?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Typical swap uses a screwdriver and takes about 5–10 minutes for both struts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ARANA","offers":[{"title":"Default Title","offer_id":55166978883927,"sku":"B0DHQVKHRY","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/arana-trunk-strut-front-view.jpg?v=1790374171"}],"url":"https:\/\/britishgarage.co.uk\/collections\/arana.oembed","provider":"British Garage","version":"1.0","type":"link"}