{"title":"AUCLIDIS","description":"\u003cp\u003eBrowse 21 AUCLIDIS products at British Garage, including shocks, struts \u0026amp; suspension. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked UK delivery on every order and 30-day returns.\u003c\/p\u003e","products":[{"product_id":"auclidis-ml99-45-10-gas-strut-set-45-lb-200-n-pair-with-10mm-ball-sockets-mounting-kit","title":"AUCLIDIS ML99-45 10\" Gas Strut Set 45 lb (200 N) — Pair with 10mm Ball Sockets \u0026 Mounting Kit","description":"\u003cp\u003e\u003cstrong\u003eAUCLIDIS ML99-45 10-inch gas struts are a pair of 45 lb (200 N) lift supports designed to replace worn shocks on truck tool boxes, RV cabinets, boat lids and similar hinged covers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese gas struts are a direct-fit replacement option engineered to match common OEM interchange numbers and mounting dimensions so you can quickly restore smooth, controlled opening and closing of storage lids and overhead doors. The set includes two struts plus mounting hardware and an installation guide, and each rod uses 10mm nylon ball sockets for both ends.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know these will fit my toolbox or cabinet?\u003c\/h3\u003e\n\u003cp\u003eMeasure your existing gas strut from ball center to ball center in both the compressed and extended positions and compare with the ML99-45 specifications. Also check for matching ball socket diameter and any OEM part numbers stamped on the original cylinder.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length: 9.84 in (center-to-center)\u003c\/li\u003e\n  \u003cli\u003eCompressed length: 6.30 in (center-to-center)\u003c\/li\u003e\n  \u003cli\u003eBall socket size: 10 mm nylon at both ends\u003c\/li\u003e\n  \u003cli\u003eCompatible interchange numbers: 1015931, 10159-31, 6915, 8322QS, 9023SS, ML9945\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat load and motion can I expect from these 45 lb (200 N) struts?\u003c\/h3\u003e\n\u003cp\u003eEach strut provides roughly 45 pounds (200 newtons) of push force, which yields steady, controlled lift and hold for many medium-duty lids and doors. They are suited to applications where you want a reliable assist in opening and a damped, stable closing motion rather than abrupt movement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated force: 45 lb \/ 200 N per strut\u003c\/li\u003e\n  \u003cli\u003eSmooth gas-driven extension and controlled retraction\u003c\/li\u003e\n  \u003cli\u003eGood for medium-weight lids such as truck tool boxes, RV overhead doors and small hatches\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how difficult is installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with two complete gas struts plus brackets, mounting screws and a step-by-step guide so most users can complete the swap with basic hand tools. You won’t need welding or special tools; just remove the old struts, attach the supplied brackets if required, and clip the nylon ball sockets onto the mating ball studs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 2 gas struts, 4 mounting brackets, 10 screws, installation guide\u003c\/li\u003e\n  \u003cli\u003eConnection type: snap-on 10 mm nylon ball sockets\u003c\/li\u003e\n  \u003cli\u003eTypical tools: screwdriver, wrench, possibly an assistant to hold the lid\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these a reliable long-term replacement and what support does AUCLIDIS offer?\u003c\/h3\u003e\n\u003cp\u003eThe ML99-45 struts are built as direct-replacement parts with common OEM fitments in mind; when installed correctly they deliver dependable operation under normal use. AUCLIDIS backs the set with a 12-month replacement guarantee and customer support if you encounter fitment or performance questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to match common OEM interchange numbers for easier sourcing\u003c\/li\u003e\n  \u003cli\u003e12-month replacement warranty from AUCLIDIS\u003c\/li\u003e\n  \u003cli\u003eCustomer service available for installation guidance and troubleshooting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The AUCLIDIS ML99-45 10-inch gas strut set is aimed at DIYers, mechanics, RV owners and boaters who need a straightforward replacement for medium-duty lid and door supports. If your current lift supports are sagging, noisy, or no longer hold lids open, this kit provides the parts and hardware to restore safe, predictable operation without specialty tools.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these replace my 1015931 struts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—ML99-45 lists 1015931 and similar numbers as compatible; confirm ball-center lengths and 10mm socket size first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install them myself without special tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Most installs require only basic hand tools and the included brackets and screws; an assistant is helpful for holding the lid.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55161002328407,"sku":"B0DFHJZ8L8","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-ml99-45-front-view-pair.jpg?v=1790320534"},{"product_id":"auclidis-12-inch-gas-struts-lift-supports-24-lb-107-n-set-of-2-10-mm-ball-sockets-for-camper-shells-toolboxes","title":"AUCLIDIS 12-inch Gas Struts Lift Supports 24 lb (107 N) Set of 2 — 10 mm Ball Sockets for Camper Shells \u0026 Toolboxes","description":"\u003cp\u003e\u003cstrong\u003eA pair of AUCLIDIS 12-inch gas struts (24 lb \/ 107 N) designed to replace OEM lift supports on camper shells, truck toppers, toolboxes and bed covers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese AUCLIDIS replacement lift supports restore smooth, controlled opening and holding of hatches and lids on pickup topper caps, snugtop shells, and toolbox doors. Each cylinder measures 12.20 inches extended and 8.66 inches compressed (measured center-to-center), with 10 mm nylon ball sockets at both ends. The set includes two identical gas struts and fits a range of interchange part numbers, making it a practical repair part when the original shocks lose pressure or fail.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this kit fits my camper shell or topper?\u003c\/h3\u003e\n\u003cp\u003eMatch three quick details to the original strut: the extended and compressed center-to-center lengths, the ball-socket diameter, and the required force. Many OEM numbers are cross-referenced on the cylinder; confirm at least two matching specs before ordering for a reliable fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length: 12.20 in (center-to-center)\u003c\/li\u003e\n  \u003cli\u003eCompressed length: 8.66 in (center-to-center)\u003c\/li\u003e\n  \u003cli\u003eEnd fittings: 10 mm nylon ball sockets at both ends\u003c\/li\u003e\n  \u003cli\u003eForce rating: 24 lb \/ 107 N\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and applications will these gas struts work with?\u003c\/h3\u003e\n\u003cp\u003eThese lift supports are intended for camper shell hatches, truck topper caps, pickup bed covers, and many aftermarket toolboxes. They replace a variety of interchange numbers used by manufacturers and aftermarket suppliers, so they’re commonly suitable for snugtop and camper shell projects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces part numbers like C16-28848, C1633273, and Stabilus Lift-O-Mat #8383IJ\u003c\/li\u003e\n  \u003cli\u003eCommonly used on camper shell lift windows and topper rear hatches\u003c\/li\u003e\n  \u003cli\u003eAlso fits some pickup toolbox lids and canopy doors\u003c\/li\u003e\n  \u003cli\u003eSold as a set of two for symmetric mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the AUCLIDIS gas struts safely?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward when you follow basic safety steps: support the lid to prevent it from dropping, remove old ball-socket clips, then snap the new nylon ball sockets onto the mounting balls. If the original fasteners are corroded, replace clips and mounting hardware to ensure secure retention.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlways support lid before removing old struts\u003c\/li\u003e\n  \u003cli\u003eSnap new 10 mm nylon sockets over existing ball studs\u003c\/li\u003e\n  \u003cli\u003eUse fresh clips or bolts if original hardware is worn\u003c\/li\u003e\n  \u003cli\u003eTest open\/close motion and confirm proper hold at several positions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho should consider this replacement pair? If your camper shell hatch, truck topper, or toolbox lid no longer stays open, opens too slowly, or sags, these AUCLIDIS gas struts restore reliable lift and positioning. They’re aimed at DIYers, fleet maintenance teams, and vehicle owners needing a direct-fit, value replacement that corresponds to common OEM numbers. Ideal for anyone wanting a two-piece replacement set with clear specifications (12.20\" extended, 8.66\" compressed, 10 mm ball ends, 24 lb \/ 107 N force) and backed by a 12-month replacement guarantee from AUCLIDIS.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePackage contents:\u003c\/em\u003e two 12-inch AUCLIDIS gas struts with nylon 10 mm ball sockets, ready to mount. For the best outcome, verify the original part number or measure your existing strut before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the exact extended and compressed lengths?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Extended length is 12.20 inches center-to-center; compressed length is 8.66 inches center-to-center.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this set include mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes two gas struts; mounting clips or bolts are not included, replace if originals are worn.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55161012814167,"sku":"B0CWXX6LHB","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-front-view-12-inch-gas-struts.jpg?v=1790320848"},{"product_id":"auclidis-7-5-gas-strut-lift-support-for-sentry-safe-18-lb-80n-replacement-with-coil-spring-set-of-1","title":"AUCLIDIS 7.5\" Gas Strut Lift Support for Sentry Safe - 18 lb (80N) Replacement with Coil Spring, Set of 1","description":"\u003cstrong\u003eAUCLIDIS 7.5-inch 18lb (80N) gas strut is a direct replacement lift support for Sentry Safe models that use QAP1BE, QAP1E or QAP1BLX cylinders, restoring smooth lid operation.\u003c\/strong\u003e\n\nThis gas shock is designed to swap in for worn or leaking Sentry Safe door struts, giving your safe lid controlled opening and steady support when accessing contents. It matches the standard OEM-style ball-end fittings and the listed extended\/compressed lengths so you can replace a failed cylinder without modifying the cabinet. The package ships with one strut and one coil spring and comes backed by AUCLIDIS customer support and an 18-month replacement guarantee.\n\n\u003ch3\u003eHow do I confirm this strut fits my Sentry Safe?\u003c\/h3\u003e\n\u003cp\u003eCheck the model number stamped on your existing cylinder or on the safe’s parts list and compare the OEM interchange (QAP1BE, QAP1E, QAP1BLX). If the OE number matches, verify the physical measurements from ball center to ball center in both extended and compressed positions to ensure proper fit and operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length: 7.68 inches (ball to ball)\u003c\/li\u003e\n  \u003cli\u003eCompressed length: 5.70 inches (ball to ball)\u003c\/li\u003e\n  \u003cli\u003eForce: 18 lb \/ 80 N suitable for many standard Sentry lids\u003c\/li\u003e\n  \u003cli\u003eCompatible OE numbers: QAP1BE, QAP1E, QAP1BLX\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and steps are needed to replace the Sentry Safe strut?\u003c\/h3\u003e\n\u003cp\u003eReplacement is typically straightforward and requires only basic hand tools. Remove the old ball-end fittings by prying off the retaining clips or unsnapping the socket, then snap the new ball ends into place; the spring included helps maintain correct tension during reassembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools: flathead screwdriver or small pry tool, safety gloves\u003c\/li\u003e\n  \u003cli\u003eRemove retaining clips or unsnap sockets from ball studs\u003c\/li\u003e\n  \u003cli\u003eInstall included spring if original has one, then snap new strut onto studs\u003c\/li\u003e\n  \u003cli\u003eTest lid motion and secure any fasteners or clips\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this 18lb force strut affect my safe lid's motion?\u003c\/h3\u003e\n\u003cp\u003eAn 18 lb (80 N) gas strut provides moderate lift and controlled descent for many mid-weight Sentry Safe lids. It reduces abrupt slamming and keeps the lid held open at accessible angles, while still allowing smooth closing when you lower it.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrevents sudden drops and reduces wear on hinge hardware\u003c\/li\u003e\n  \u003cli\u003eMaintains lid position for safe access and loading\u003c\/li\u003e\n  \u003cli\u003eBalanced force for typical home or office Sentry safes\u003c\/li\u003e\n  \u003cli\u003eNot intended to alter factory hinge geometry—matches OEM behavior\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I compare if the fit feels off after installation?\u003c\/h3\u003e\n\u003cp\u003eIf the lid feels too heavy or too light after swapping the strut, double-check the length, ball-stud spacing and whether the spring was installed correctly. Minor variations in hinge position or an extra bracket may require a different force rating or a slightly different extended length.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRe-measure ball-to-ball lengths against original cylinder\u003c\/li\u003e\n  \u003cli\u003eConfirm spring orientation and clip engagement\u003c\/li\u003e\n  \u003cli\u003eConsider a different N\/Lb rating if lid balance is incorrect\u003c\/li\u003e\n  \u003cli\u003eContact AUCLIDIS support for fit advice or replacement within 18 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\nThis AUCLIDIS replacement strut is intended for homeowners, small businesses and maintenance pros who need a like-for-like gas lift for Sentry Safe boxes using QAP1BE\/QAP1E\/QAP1BLX parts. If your safe lid shows leaking oil, inconsistent support, or noisy motion, this 7.5\" 18lb unit lets you restore safe functionality quickly without expensive OEM ordering. For unusual hinge arrangements or nonstandard safes, measure carefully or reach out to our support team for guidance before purchasing.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this gas strut an exact Sentry Safe OEM replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—it's designed to match QAP1BE, QAP1E and QAP1BLX specifications including ball-to-ball lengths and 18lb force.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long is the AUCLIDIS warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: AUCLIDIS provides an 18-month replacement guarantee and customer support for fit or performance issues.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55161073729879,"sku":"B0FX4Q7TDW","price":31.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-front-view-sentry-strut.jpg?v=1790321906"},{"product_id":"auclidis-14-gas-strut-lift-support-set-of-2-24-lb-107-n-10mm-ball-sockets-13-98-extended","title":"AUCLIDIS 14\" Gas Strut Lift Support Set of 2 — 24 lb (107 N), 10mm Ball Sockets, 13.98\" Extended","description":"\u003cstrong\u003eThese AUCLIDIS C16-06389 gas struts are 14-inch, 24 lb (107 N) lift supports sold as a set of two for camper shells, truck toppers, toolbox lids and similar applications.\u003c\/strong\u003e\n\n\u003cp\u003eReplace worn or broken lift supports quickly with this matched pair of gas struts engineered for camper shell and topper doors. Each strut measures 13.98\" extended and 8.90\" compressed (ball-center to ball-center) and uses 10 mm nylon ball sockets on both ends. The set includes two struts and a basic installation guide so you can restore smooth opening and secure holding for your tailgate, canopy door or toolbox lid.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm these struts fit my camper shell or topper?\u003c\/h3\u003e\n\u003cp\u003eMatch three key details from your original strut: extended\/compressed lengths, ball socket diameter, and force rating. The AUCLIDIS C16-06389 corresponds to many OEM interchange numbers, making it simpler to verify compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length: 13.98 inches (ball center to ball center)\u003c\/li\u003e\n  \u003cli\u003eCompressed length: 8.90 inches (ball center to ball center)\u003c\/li\u003e\n  \u003cli\u003eBall\/socket connection: 10 mm nylon ball sockets both ends\u003c\/li\u003e\n  \u003cli\u003eForce rating: 24 lb (107 N)\u003c\/li\u003e\n  \u003cli\u003eCommon interchange numbers: C16-06389, C1606389, SE140P25S10, 8409QP, and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and steps are needed for installation?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for most DIYers and typically requires only basic hand tools. The supplied struts use standard 10 mm ball socket fittings so you usually only need to unclip the old socket and snap the new one into place.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended tools: flathead screwdriver and wrench set\u003c\/li\u003e\n  \u003cli\u003eRemove old strut by prying off ball-socket clips gently\u003c\/li\u003e\n  \u003cli\u003eAlign new strut and push sockets onto ball studs until they click\u003c\/li\u003e\n  \u003cli\u003eTest the door motion and check for secure attachment before use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical and performance specifications?\u003c\/h3\u003e\n\u003cp\u003eThese gas lift supports are specified for mid-range loads and designed to provide smooth, controlled opening and holding for lids and doors. Dimensions and connection types are consistent with many OEM replacement part numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length: 13.98\" (ball-center to ball-center)\u003c\/li\u003e\n  \u003cli\u003eCompressed length: 8.90\" (ball-center to ball-center)\u003c\/li\u003e\n  \u003cli\u003eForce: 24 lb (107 N)\u003c\/li\u003e\n  \u003cli\u003eConnection: 10 mm nylon ball sockets (shaft and body)\u003c\/li\u003e\n  \u003cli\u003ePack contents: two gas struts and one installation guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable are AUCLIDIS replacement struts and what warranty is included?\u003c\/h3\u003e\n\u003cp\u003eAUCLIDIS provides a customer support channel and backs these gas struts with a 12-month replacement guarantee. Proper installation and matching to the original specifications help ensure predictable service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: AUCLIDIS\u003c\/li\u003e\n  \u003cli\u003eWarranty: 12-month replacement guarantee\u003c\/li\u003e\n  \u003cli\u003eSupport: dedicated customer service available online\u003c\/li\u003e\n  \u003cli\u003ePackaged as a matched pair for balanced performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a camper shell, truck topper, toolbox lid, canopy door or similar application that uses ball-socket gas struts and you need a direct-fit replacement with a mid-range 24 lb lift rating, this AUCLIDIS C16-06389 set is built to match common OEM sizes and interchange numbers. Confirm lengths, ball sizes and force rating against your original parts for the best fit, and enjoy a set that arrives ready for straightforward DIY swapping with support from AUCLIDIS should you need it.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these gas struts a direct replacement for OEM part C1606389?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these AUCLIDIS struts match C16-06389\/C1606389 specifications: 13.98\" extended, 8.90\" compressed, 10 mm ball sockets, 24 lb force.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these myself without professional help?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Usually yes. Basic tools and simple ball-socket clips are all that’s needed; follow the included guide and verify secure attachment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55161869926743,"sku":"B0D2PWNGZ3","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-front-packaging-14in-gas-strut.jpg?v=1790333110"},{"product_id":"auclidis-15-inch-gas-strut-set-for-camper-shells-truck-toppers-24-lb-107-n-10mm-ball-sockets-set-of-2","title":"AUCLIDIS 15-inch Gas Strut Set for Camper Shells \u0026 Truck Toppers — 24 lb (107 N), 10mm Ball Sockets, Set of 2","description":"\u003cp\u003e\u003cstrong\u003eAUCLIDIS 15-inch gas strut set (C16-04154) provides 24 lb (107 N) lift support for camper shell doors, truck toppers, and toolboxes as a direct replacement pair.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese replacement gas springs are made to match common OEM numbers and restore smooth opening and secure hold of camper shell and truck topper doors. Each set includes two 15-inch gas struts with 10 mm nylon ball socket fittings at both ends. Before buying, check the original strut’s part number and measure ball-center lengths to confirm fitment.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm this gas strut fits my camper shell or topper?\u003c\/h3\u003e\n\u003cp\u003eMeasure the gas strut from ball center to ball center when fully extended and when compressed, and compare any OEM numbers stamped on the original cylinder. This AUCLIDIS model corresponds to several interchange numbers often found on camper shell parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length: 14.47 inches (ball center to ball center).\u003c\/li\u003e\n  \u003cli\u003eCompressed length: 8.66 inches (ball center to ball center).\u003c\/li\u003e\n  \u003cli\u003eForce rating: 24 lb \/ 107 N.\u003c\/li\u003e\n  \u003cli\u003eFittings: 10 mm nylon ball sockets both ends.\u003c\/li\u003e\n  \u003cli\u003eCommon interchange numbers: 025531, C1604154, C16-04154, 95851, GP6624, SG359024, and others.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and applications are these gas struts made for?\u003c\/h3\u003e\n\u003cp\u003eThese struts are designed for camper shells, truck topper caps, canopy doors, windows, and many toolbox lids that use similar ball-socket gas springs. They work as direct replacement parts when dimensions and force rating align with the original hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCamper shell\/toppers and SnugTop-style caps.\u003c\/li\u003e\n  \u003cli\u003eTruck canopy doors and rear windows with ball-socket mounts.\u003c\/li\u003e\n  \u003cli\u003eToolbox lids and storage compartments using 10 mm ball fittings.\u003c\/li\u003e\n  \u003cli\u003eOther aftermarket or OEM systems matching listed part numbers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the AUCLIDIS 15\" gas struts safely and correctly?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires basic tools and one person holding the door or lid. Remove the old strut by popping off the ball sockets, align the new strut so the body and shaft match the original orientation, then press the nylon ball sockets onto the vehicle’s ball studs until they snap into place.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupport the lid or door before removing old strut to prevent sudden closure.\u003c\/li\u003e\n  \u003cli\u003eConfirm orientation: shaft typically faces the load or downward when closed.\u003c\/li\u003e\n  \u003cli\u003eSnap new nylon ball sockets onto 10 mm ball studs until secured.\u003c\/li\u003e\n  \u003cli\u003eCheck operation a few times for smooth travel and correct holding force.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect in the package and from AUCLIDIS after purchase?\u003c\/h3\u003e\n\u003cp\u003eThe listing includes two identical 15-inch gas struts ready to install. AUCLIDIS backs this product with customer support and a 12-month replacement guarantee for manufacturing issues, helping ensure you receive functioning replacement parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContents: two (2) AUCLIDIS 15\" gas struts, pre-fitted with 10 mm nylon ball sockets.\u003c\/li\u003e\n  \u003cli\u003eWarranty: 12-month replacement guarantee for defects.\u003c\/li\u003e\n  \u003cli\u003eSupport: AUCLIDIS customer service available for fitment or installation questions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This AUCLIDIS gas strut set is for vehicle owners, mechanics, and DIY installers replacing worn or failed lift supports on camper shells, truck toppers, canopies, or toolbox lids. Choose this pair if your original struts match the listed lengths, 10 mm ball socket fittings, and the 24 lb (107 N) force rating, or if you find a matching interchange number on your existing cylinders.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these gas struts a direct replacement for part number 025531?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — AUCLIDIS lists interchange numbers including 025531; confirm lengths and 10 mm ball fittings to ensure a direct swap.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the lift force and dimensions of these struts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each strut provides 24 lb (107 N). Extended length 14.47\" and compressed 8.66\" measured ball center to ball center.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55162000114007,"sku":"B0CWXR9ZBG","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-front-packaging-15in-gas-struts.jpg?v=1790334577"},{"product_id":"auclidis-hood-strut-lift-supports-for-nissan-armada-2017-2021-set-of-2-oem-fit-gas-shocks","title":"AUCLIDIS Bonnet Strut Lift Supports for Nissan Armada 2017–2021 — Set of 2, OEM-fit Gas Shocks","description":"\u003cp\u003e\u003cstrong\u003eAUCLIDIS hood strut lift supports are direct-fit gas shocks made to replace the Nissan Armada 2017–2021 front bonnet struts for reliable, OEM-like hood lift and hold.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese gas struts are engineered to match the original hood support geometry and performance for Nissan Armada model years 2017 through 2021. Each set includes two lift supports that replicate the manufacturer’s specifications, including ball-to-ball extended and compressed lengths and stroke. They are designed for a no-modification swap, so you can restore safe, smooth hood opening and secure holding after installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these AUCLIDIS struts fit my Nissan Armada?\u003c\/h3\u003e\n\u003cp\u003eThe lift supports are manufactured to align with the Armada’s factory mounting points and ball-stud fittings, making them a direct replacement for the OEM parts listed. They correspond to common Nissan part numbers and match original dimensions for straightforward compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Nissan Armada 2017, 2018, 2019, 2020, 2021.\u003c\/li\u003e\n  \u003cli\u003eInterchange with OEM numbers: 654701LB0A, 654711LB0A and related variants.\u003c\/li\u003e\n  \u003cli\u003eBall-to-ball extended length: 18.35 inches; compressed: 11.44 inches; stroke: 6.91 inches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance can I expect compared with the original hood shocks?\u003c\/h3\u003e\n\u003cp\u003eThese gas springs are built to deliver lift force and damping close to factory specifications so the hood opens smoothly and stays up reliably. They are tuned to provide balanced lift without sudden drops or excessive force when closing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered for OEM-standard support and controlled motion.\u003c\/li\u003e\n  \u003cli\u003eDesigned to prevent hood flutter or unexpected lowering.\u003c\/li\u003e\n  \u003cli\u003eDurable seals and gas charge intended for consistent operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is the installation, and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and typically requires only simple hand tools. The design uses ball-stud connectors for quick removal of the old struts and snapping in the replacements, so no special fabrication or drilling is necessary.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree-step replacement process: remove old, align new, snap into ball studs.\u003c\/li\u003e\n  \u003cli\u003eNo professional mechanics or complex tools required—common pliers and a small flat tool suffice.\u003c\/li\u003e\n  \u003cli\u003eSwap both struts as a pair to maintain balanced hood operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support does AUCLIDIS provide if something goes wrong?\u003c\/h3\u003e\n\u003cp\u003eAUCLIDIS offers an 18-month replacement guarantee that covers defects and premature failure under normal use. Their customer service team is available to help with fitment questions, returns, or replacement processing to ensure you get a functioning pair quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e18-month replacement guarantee included with purchase.\u003c\/li\u003e\n  \u003cli\u003eResponsive customer support for fitment guidance or issues.\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement assurance—no vehicle modifications expected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This AUCLIDIS hood strut set is intended for Nissan Armada owners and mechanics who need a dependable, OEM-compatible replacement for worn or failed hood shocks on 2017–2021 models. It suits DIY technicians wanting a quick, tool-light installation as well as shops seeking a cost-effective, spec-matching alternative to dealer parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these struts fit my 2019 Nissan Armada?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These AUCLIDIS struts are made to directly replace OEM hood supports on 2017–2021 Armada models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Installation typically requires only basic hand tools and snapping the new struts onto existing ball studs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55162025804119,"sku":"B0F9TQ68TG","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-front-packaging-nissan-armada-hood-struts.jpg?v=1790334671"},{"product_id":"auclidis-16-inch-38-lb-gas-strut-set-replacement-camper-shell-lift-supports-10mm-ball-sockets-set-of-2","title":"AUCLIDIS 16-inch 38 lb Gas Strut Set — Replacement Camper Shell Lift Supports, 10mm Ball Sockets, Set of 2","description":"\u003cp\u003e\u003cstrong\u003eAUCLIDIS C16-09209 is a pair of 16-inch, 38 lb (169 N) gas struts designed to replace worn or broken lift supports on camper shells, truck toppers, canopy doors, and pickup windows.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement gas shocks provide reliable, controlled lift and hold for camper shell hatches and utility lids. Engineered to match common OEM interchange numbers, the set of two is sized to replicate original equipment dimensions and mounting style so you can swap them in without modifying the vehicle. Each strut uses 10 mm nylon ball sockets on both ends and comes with a manufacturer-backed 12-month replacement guarantee and customer support from AUCLIDIS.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm these struts will fit my camper shell or topper?\u003c\/h3\u003e\n\u003cp\u003eMatch the OEM part number stamped on your existing strut or compare key measurements. AUCLIDIS provides a list of compatible reference numbers and precise length specs so you can verify fit before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare interchange numbers: C1609209, C16-09209, C16-33309, C16-33277, C16-14195, and others.\u003c\/li\u003e\n  \u003cli\u003eCheck extended length: 15.71 inches (center-to-center).\u003c\/li\u003e\n  \u003cli\u003eCheck compressed length: 9.80 inches (center-to-center).\u003c\/li\u003e\n  \u003cli\u003eConfirm end fittings: 10 mm nylon ball sockets at both ends.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat load and motion behavior should I expect from these 38 lb struts?\u003c\/h3\u003e\n\u003cp\u003eEach gas spring delivers roughly 38 pounds (169 N) of force to assist opening and to hold lids in the open position under normal loads. They provide smooth extension and dampened closing to help prevent slamming while giving predictable lift assistance for camper and truck applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated force: 38 lb \/ 169 N per strut for consistent support.\u003c\/li\u003e\n  \u003cli\u003eSmooth, gas-assisted lift for controlled opening and closing.\u003c\/li\u003e\n  \u003cli\u003eDurable body to withstand regular outdoor use on vehicle installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the AUCLIDIS gas strut set on my vehicle?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward when your original strut uses 10 mm ball sockets; typical replacements require removing the old sockets and snapping the new strut ends onto the vehicle ball studs. No special tools are usually necessary beyond basic hand tools to remove retainers and install the new supports.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify ball stud size and orientation matches the 10 mm nylon sockets.\u003c\/li\u003e\n  \u003cli\u003eSupport the hatch or lid before removing the old struts for safety.\u003c\/li\u003e\n  \u003cli\u003eSnap new sockets onto ball studs; secure any retaining clips if present.\u003c\/li\u003e\n  \u003cli\u003eTest operation slowly to confirm correct fit and motion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what warranty or support is provided?\u003c\/h3\u003e\n\u003cp\u003eThe product ships as a set of two gas struts and is covered by AUCLIDIS customer care and a 12-month replacement guarantee. If you need assistance identifying the correct interchange number or troubleshooting installation, AUCLIDIS offers direct support channels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contents: two 16-inch gas struts (pair).\u003c\/li\u003e\n  \u003cli\u003eDocumentation: measurement and part-number guidance for fit verification.\u003c\/li\u003e\n  \u003cli\u003eSupport: online customer service and a 12-month replacement policy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These AUCLIDIS gas struts are intended for vehicle owners, mechanics, and fleet managers who need a reliable, OEM-compatible replacement for camper shell hatches, truck topper caps, canopies, pickup windows, and snugtop applications. Choose this set if your original parts list includes any of the listed interchange numbers or if the provided center-to-center lengths and 10 mm nylon ball fittings match your installation requirements.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these struts a direct swap for my OEM part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your OEM number matches one of the listed interchange numbers and the center-to-center lengths and 10 mm ball fittings match, they should be a direct swap.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts come as a pair and include mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes two gas struts; typical mounting sockets are fitted but separate vehicle-specific clips or ball studs may be required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55162235945303,"sku":"B0CWXSJ6DX","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-front-view-packaging-gas-struts.jpg?v=1790335334"},{"product_id":"auclidis-13-30-lb-gas-strut-lift-support-set-of-2-10mm-ball-sockets-5-stroke-for-camper-shells-truck-toppers","title":"AUCLIDIS 13\" 30 lb Gas Strut Lift Support Set of 2 — 10mm Ball Sockets, 5\" Stroke for Camper Shells \u0026 Truck Toppers","description":"\u003cp\u003e\u003cstrong\u003eAUCLIDIS C16-04464 is a pair of 13-inch, 30 lb (133 N) gas struts designed to replace worn or broken lift supports on camper shells, truck toppers, canopy doors, toolboxes and similar applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement gas shocks are engineered to match common OEM fitments for camper shells and truck caps, providing consistent lift and controlled closing for doors and lids. The pair arrives ready to install with nylon 10 mm ball-socket fittings and a mid-range stroke length ideal for many recreational vehicle and utility box applications. Before ordering, compare the original strut’s part number and dimensions to ensure correct interchange and operation.\u003c\/p\u003e\n\n\u003ch3\u003eWill these gas struts fit my camper shell or truck topper?\u003c\/h3\u003e\n\n\u003cp\u003eCompatibility depends on the original strut’s dimensions and connection style. This AUCLIDIS set matches many common interchange numbers, but you should verify the measurements and ball-socket size on your existing struts for an accurate match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length: 13.00 inches (ball center to ball center)\u003c\/li\u003e\n  \u003cli\u003eCompressed length: 7.99 inches (ball center to ball center)\u003c\/li\u003e\n  \u003cli\u003eStroke: 5.01 inches\u003c\/li\u003e\n  \u003cli\u003eConnection: 10 mm nylon ball sockets at both ends\u003c\/li\u003e\n  \u003cli\u003eForce: 30 lb \/ 133 N\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these replacement struts perform during everyday use?\u003c\/h3\u003e\n\n\u003cp\u003eThese struts provide steady support for opening and holding lids or doors, then dampen closing movement to reduce slamming. Their mid-range force is intended for medium-weight applications like camper shell doors and small tool chests, giving predictable lift without excessive force.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConsistent 30 lb push force for balanced opening\u003c\/li\u003e\n  \u003cli\u003eSmooth travel across a 5.01-inch stroke\u003c\/li\u003e\n  \u003cli\u003eNylon ball sockets for common quick-connect mounts\u003c\/li\u003e\n  \u003cli\u003eDesigned to replace various OEM part numbers for interchangeability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do I need to know about installation and maintenance?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward when your original mounts use 10 mm ball studs; no special tools are required for most installs. Regular visual checks for corrosion or socket wear help maintain safe operation; these struts are provided as a matched pair for even support across the opening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounting: snap onto 10 mm ball studs—no special adapters needed if studs match\u003c\/li\u003e\n  \u003cli\u003eSwap both sides together to keep balanced lift\u003c\/li\u003e\n  \u003cli\u003eInspect sockets and shafts periodically for wear or leaks\u003c\/li\u003e\n  \u003cli\u003eIf unsure, compare OEM numbers like 711498, C1604464, C16-04464 before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich interchange part numbers match this AUCLIDIS gas strut?\u003c\/h3\u003e\n\n\u003cp\u003eThe AUCLIDIS pair is made to replace several commonly referenced OEM numbers, easing the search for a compatible aftermarket option. Use the original strut’s printed code as a reference to confirm a direct replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon interchange IDs: 711498, C1604464, C16-04464, C1604464A\u003c\/li\u003e\n  \u003cli\u003eAlso cross-references: C16-04464A, C1621703, C16-21703\u003c\/li\u003e\n  \u003cli\u003eEquivalent model codes: CS130030, CS1300-30, SE130P30\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This AUCLIDIS C16-04464 pair is for vehicle owners and DIY technicians replacing medium-duty lift supports on camper shells, truck caps, toolbox lids or canopy doors. Choose this set if your original strut's ball-to-ball lengths, socket size and force rating match, and you want a ready-to-install, matched pair backed by a 12-month replacement guarantee and customer support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the exact dimensions of these gas struts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Extended 13.00\" and compressed 7.99\" (ball center to ball center), stroke 5.01\", 10 mm ball sockets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these without special tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they snap onto 10 mm ball studs; basic hand tools may be needed to remove old mounts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55162241155415,"sku":"B0CWXX1NFB","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-front-view-13-inch-gas-struts.jpg?v=1790335359"},{"product_id":"auclidis-gas-strut-lift-supports-12in-40-lb-set-of-2-for-truck-toolboxes-camper-toppers-10mm-ball-sockets","title":"AUCLIDIS gas strut lift supports — 12in 40 lb set of 2 for truck toolboxes \u0026 camper toppers, 10mm ball sockets","description":"\u003cp\u003e\u003cstrong\u003eAUCLIDIS C16-11028 is a pair of 12-inch gas struts providing 40 lb (178 N) lift support designed to replace worn shocks on truck toolboxes, camper shells, toppers and pickup doors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pair of replacement lift supports restores controlled opening and steady holding for lids and doors that rely on gas struts. Engineered to match common OEM interchange numbers, the C16-11028 set fits a wide range of toolbox and topper models so you can swap them quickly without modifying mounting points.\u003c\/p\u003e\n\n\u003ch3\u003eWill these gas struts fit my toolbox or camper shell?\u003c\/h3\u003e\n\u003cp\u003eThey are built to be compatible with many popular toolbox and topper models and list several interchange part numbers for quick reference. Compare the original cylinder markings and ball-to-ball dimensions to confirm fit before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length: 12.20 inches (ball center to ball center)\u003c\/li\u003e\n  \u003cli\u003eCompressed length: 8.66 inches (ball center to ball center)\u003c\/li\u003e\n  \u003cli\u003eBall sockets: 10 mm nylon at shaft and body\u003c\/li\u003e\n  \u003cli\u003eInterchange numbers: C16-11028, C1611028, 19068, 7009-2PK, ML1540, SL15-40\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much lift force do these struts provide and what does that mean?\u003c\/h3\u003e\n\u003cp\u003eEach strut delivers approximately 40 pounds (178 N) of push force, suitable for medium-weight lids and doors commonly found on truck toolboxes and camper toppers. This force helps open heavy panels reliably and keeps them supported at full extension for safe access.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForce rating: 40 lb \/ 178 N per strut\u003c\/li\u003e\n  \u003cli\u003eTwo-strut set to balance and stabilize lids\u003c\/li\u003e\n  \u003cli\u003eDesigned for steady hold without sudden drops\u003c\/li\u003e\n  \u003cli\u003eWorks well for single- or dual-strut applications depending on the original setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the connection details and installation considerations?\u003c\/h3\u003e\n\u003cp\u003eThe C16-11028 uses 10 mm nylon ball sockets on both ends, matching many standard mounting studs used on toolboxes and toppers. Installation is straightforward: remove the old struts, snap the ball sockets onto the existing studs, and verify smooth operation across the full travel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSockets: 10 mm nylon ball at both shaft and body\u003c\/li\u003e\n  \u003cli\u003eSimple snap-on replacement—no welding or drilling required for most installs\u003c\/li\u003e\n  \u003cli\u003eMeasure existing ball-to-ball length to confirm match to 12.20\"\/8.66\" specs\u003c\/li\u003e\n  \u003cli\u003eSold as a set of two for paired installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and customer support come with this product?\u003c\/h3\u003e\n\u003cp\u003eAUCLIDIS backs this gas strut set with a 12-month replacement guarantee and a dedicated customer service team to assist with fit questions or issues. If you find the parts don’t match your original specifications, reach out for guidance or replacement within the warranty period.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-month replacement guarantee included\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fit and installation help\u003c\/li\u003e\n  \u003cli\u003ePackage contains two identical 12\" gas struts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The AUCLIDIS C16-11028 set is ideal for vehicle owners, fleet managers and DIY technicians who need a reliable direct-replacement lift support for truck toolboxes, camper shells, toppers and pickup doors. If your original struts match the listed interchange numbers or the ball-to-ball measurements and you need steady 40 lb support, this set provides a cost-effective, easy-to-install solution with warranty coverage and customer assistance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these gas struts sold as a pair?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the C16-11028 comes as a set of two identical 12-inch gas struts for paired installations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm these will fit my toolbox?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare your current strut's ball-to-ball lengths and interchange numbers to the listed specs: 12.20\" extended, 8.66\" compressed, 10 mm nylon ball sockets.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55162629456215,"sku":"B0CWX63DLJ","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-front-packaging-c16-11028.jpg?v=1790337675"},{"product_id":"auclidis-14-inch-gas-strut-lift-supports-for-camper-shells-35lb-156n-set-of-2-with-nylon-ball-socket-ends","title":"AUCLIDIS 14-inch Gas Strut Lift Supports for Camper Shells, 35lb (156N) Set of 2 with Nylon Ball-Socket Ends","description":"\u003cp\u003e\u003cstrong\u003eAUCLIDIS 14-inch 35lb (156N) gas strut set designed to replace OEM C16-10176\/C16-33276 lift supports on camper shells, truck toppers, canopies and toolbox lids.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf a worn or weak lift support is making your camper shell, truck topper or toolbox lid hard to open or hold, this AUCLIDIS replacement pair restores smooth, reliable lift and dampening. These shocks match common OEM interchange numbers and offer nylon ball-socket ends for easy, direct swap-out. The set includes two gas struts plus a basic installation guide so you can replace both sides for balanced operation.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know these will fit my camper shell or topper?\u003c\/h3\u003e\n\u003cp\u003eCheck the original part numbers stamped on your current strut or measure ball-center-to-ball-center lengths. This AUCLIDIS set lists multiple interchange numbers and precise dimensions to help verify fit before purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeasured extended length: 13.98 inches (center-to-center)\u003c\/li\u003e\n\u003cli\u003eMeasured compressed length: 8.90 inches (center-to-center)\u003c\/li\u003e\n\u003cli\u003eNylon 10mm ball-socket ends on both shaft and body\u003c\/li\u003e\n\u003cli\u003eCommon interchange numbers: C16-10176, C1610176, C16-33276, C1610493, SE140P40, TAG #62896\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and specifications should I expect from these gas struts?\u003c\/h3\u003e\n\u003cp\u003eThese lift supports provide 35 pounds (156 newtons) of force, delivering moderate lift assistance and steady hold for medium-weight lids and doors. They’re designed to replace like-for-like OEM parts rather than upgrade heavy-duty applications.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated force: 35 lb (156 N)\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant body suitable for exterior vehicle use\u003c\/li\u003e\n\u003cli\u003eNylon ball-socket fitment for quick install and replacement\u003c\/li\u003e\n\u003cli\u003eSold as a pair to restore balanced lift and wear evenness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what comes in the package?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for most DIYers: remove the old ball-socket mounted struts, align the new sockets over the existing studs and snap into place. The included guide covers basic steps and safety tips for handling pressurized struts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePackage includes: two 14-inch gas struts and one installation guide\u003c\/li\u003e\n\u003cli\u003eNo special tools required beyond common hand tools for removing clips or fasteners\u003c\/li\u003e\n\u003cli\u003eReplace both sides to maintain even door motion and load distribution\u003c\/li\u003e\n\u003cli\u003eFollow vehicle-specific instructions if available for safe handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these AUCLIDIS struts interchangeable with my OEM model numbers?\u003c\/h3\u003e\n\u003cp\u003eAUCLIDIS lists multiple cross-reference numbers to simplify matching: look for the OEM code on your current strut and compare. If the lengths, ball-socket size and force rating match, these should be an appropriate replacement.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInterchange references include: C16-10176, C16-33276, C16-10493 and related codes\u003c\/li\u003e\n\u003cli\u003eAlso cross-references Lift-O-Mat #691004 and TAG numbers 62896 or 97744\u003c\/li\u003e\n\u003cli\u003eConfirm both length and socket size (10mm) for correct installation\u003c\/li\u003e\n\u003cli\u003eContact AUCLIDIS support for part verification if uncertain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These AUCLIDIS gas struts suit vehicle owners, DIY mechanics and fleet managers who need a direct-fit, moderately rated lift support replacement for camper shells, truck toppers, canopy doors, snugtops and toolbox lids. Choose this pair when your original OEM part numbers or measured lengths match, and you want a quick, reliable swap with a clear specification and a 12-month replacement guarantee.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit if my old strut shows C1610176?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. C1610176 is listed as an interchange; confirm the 13.98\" extended length and 10mm ball sockets match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these myself without special tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Usually yes—most installs require only basic hand tools and snapping the ball sockets onto existing studs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55163634418007,"sku":"B0D2PX8FVL","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-front-packaging-14in-gas-struts.jpg?v=1790346208"},{"product_id":"auclidis-14-gas-strut-lift-supports-15-lb-set-of-2-14-00-extended-10-mm-ball-sockets-for-truck-toolboxes-camper-shells","title":"AUCLIDIS 14\" Gas Strut Lift Supports 15 lb (Set of 2) — 14.00\" Extended, 10 mm Ball Sockets for Truck Toolboxes \u0026 Camper Shells","description":"\u003cstrong\u003eAUCLIDIS 14-inch SX140P15 gas struts are a pair of 15 lb (67 N) lift supports designed to replace worn or broken shocks on truck toolboxes, camper shells, toppers and canopies.\u003c\/strong\u003e\n\n\u003cp\u003eIf your truck topper, toolbox lid or camper shell stays closed or slams when opening, these replacement gas springs restore smooth, controlled lifting and holding. The pair matches common interchange numbers and offers nylon ball-socket fittings for simple swap-in installation. This description summarizes fit, measurements, fast facts and practical uses so you can confirm compatibility before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWill these replace my current gas struts on a toolbox or topper?\u003c\/h3\u003e\n\u003cp\u003eThey are intended as direct replacements for many OEM parts used on toppers, canopies and toolboxes. Compare the interchange numbers stamped on your original cylinder: SX140P15, lt08-05b or SE1375P15M13 are the common references used for cross-compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInterchange references: SX140P15 \/ lt08-05b \/ SE1375P15M13.\u003c\/li\u003e\n  \u003cli\u003eCheck your original part number on the strut body before purchasing.\u003c\/li\u003e\n  \u003cli\u003eSold as a set of two for matching left and right installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact measurements and connection types?\u003c\/h3\u003e\n\u003cp\u003eMeasure ball-center-to-ball-center to confirm fit: fully extended length is 14.00 inches and compressed length is 8.39 inches. Both ends use 10 mm nylon ball-socket connectors for straightforward replacement without specialty tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length: 14.00 in (ball center to ball center).\u003c\/li\u003e\n  \u003cli\u003eCompressed length: 8.39 in (ball center to ball center).\u003c\/li\u003e\n  \u003cli\u003eEnd fittings: 10 mm nylon ball sockets on shaft and body.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much lifting force do these struts provide and what does that mean?\u003c\/h3\u003e\n\u003cp\u003eEach gas spring delivers about 15 pounds (67 newtons) of push force, enough to support and control typical truck toolbox and camper shell lids. That force helps prevent sudden closures and reduces the effort needed to raise heavy lids, but always check lid weight and hinge geometry to ensure adequate support.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated force: 15 lb \/ 67 N per strut.\u003c\/li\u003e\n  \u003cli\u003eDesigned to assist opening and to hold lids open under normal use.\u003c\/li\u003e\n  \u003cli\u003eForce selection depends on lid weight, hinge position and mounting angle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the installation and what comes in the package?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for most DIYers: remove the old struts, snap the nylon ball sockets onto the 10 mm ball studs and test operation. AUCLIDIS includes two struts and a concise installation guide; standard hand tools are usually sufficient for the swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contents: two 14\" gas struts and one installation guide.\u003c\/li\u003e\n  \u003cli\u003eMounting: snap-on 10 mm ball-socket connectors; no special press required.\u003c\/li\u003e\n  \u003cli\u003eTools: commonly just basic hand tools for removing old fasteners and studs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This set is intended for owners of pickup truck toppers, camper shells, truck toolboxes, canopies and aftermarket lids who need a reliable, OEM-style replacement. Choose these if your current lift supports are sagging, leaking, or incompatible with safe operation, and verify the stamped part number and measurements match your original struts before ordering. AUCLIDIS backs the set with a 12-month replacement guarantee and customer support to help with fit questions or post-purchase concerns.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these gas struts compatible with my camper shell?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check the stamped part number on your existing strut for SX140P15, lt08-05b or SE1375P15M13 and verify 14\" extended\/8.39\" compressed measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these without a mechanic?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They use snap-on 10 mm nylon ball sockets; basic hand tools are usually enough for removal and installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55163747598679,"sku":"B0D2PYCPB5","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-front-packaging-14in-gas-struts_b4889dd2-1503-4112-8a94-28bbcdcc90a8.jpg?v=1790347041"},{"product_id":"auclidis-17-gas-strut-pair-for-camper-shells-truck-toppers-28-lb-lift-10-mm-ball-sockets-set-of-2","title":"AUCLIDIS 17\" Gas Strut Pair for Camper Shells \u0026 Truck Toppers, 28 lb Lift, 10 mm Ball Sockets (Set of 2)","description":"\u003cp\u003e\u003cstrong\u003eAUCLIDIS 17-inch gas strut pair delivers 28 lb (125 N) of lift support for camper shell\/toppper doors, windows, and toolbox lids.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement set of two gas struts is designed for camper shells, truck toppers, snugtop canopies, rear windows and toolbox lids that match the GSNI-5200-30 family of parts. Each strut measures 17.13 inches extended and 10.75 inches compressed (center-to-center), and both ends use 10 mm nylon ball sockets for straightforward swap-in installation when the OEM numbers align.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm these gas struts will fit my camper shell or truck topper?\u003c\/h3\u003e\n\u003cp\u003eMatch the original gas strut’s specifications and interchange numbers before ordering. Check the extended and compressed center-to-center lengths, the force rating, and the ball socket size. If the OEM number appears in the interchange list, compatibility is very likely.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length: 17.13 in (center-to-center)\u003c\/li\u003e\n  \u003cli\u003eCompressed length: 10.75 in (center-to-center)\u003c\/li\u003e\n  \u003cli\u003eForce: 28 lb \/ 125 N\u003c\/li\u003e\n  \u003cli\u003eBall socket size: 10 mm nylon at both ends\u003c\/li\u003e\n  \u003cli\u003eReference interchange numbers included (e.g., C1602622, C1615041, C1615070)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicle parts and models is this set compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis set is intended for a wide range of camper shell and topper applications that use GSNI-5200-30 style struts. It’s commonly used on rear windows, side windows, and toolbox lids for several topper brands and aftermarket configurations when the part numbers or dimensions match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon families: GSNI-5200-30, SPD-5200-30 variants, SX172P-30\u003c\/li\u003e\n  \u003cli\u003eUsed for: camper shell rear windows, truck topper doors, canopy panels, toolbox lids\u003c\/li\u003e\n  \u003cli\u003eInterchange list helps cross-reference OEM numbers before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install these gas struts safely and what should I expect during replacement?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically a two-person job to hold the panel while you remove and attach ball-socket ends. Use the existing mounting studs if they are 10 mm ball studs; otherwise replace connectors to match. Expect smoother opening and secure holding once correctly fitted.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse a second person or support prop during removal and installation\u003c\/li\u003e\n  \u003cli\u003eConfirm mounting studs are 10 mm ball type or replace end fittings as needed\u003c\/li\u003e\n  \u003cli\u003eTest the panel’s range of motion and hold before finalizing fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability features should I know about this 17\" AUCLIDIS strut set?\u003c\/h3\u003e\n\u003cp\u003eThe pair provides consistent 28 lb lift force designed to hold medium-weight panels open reliably. Nylon ball sockets at both ends reduce metal-on-metal wear and simplify replacement with standard ball-stud mounts. AUCLIDIS backs the product with a 12-month replacement guarantee and customer support to help with fit questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLift force: 28 lb \/ 125 N for steady support\u003c\/li\u003e\n  \u003cli\u003eEnd fittings: 10 mm nylon ball sockets for easier mounting and reduced wear\u003c\/li\u003e\n  \u003cli\u003eManufacturer support: 12-month replacement guarantee and customer service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Choose this AUCLIDIS 17-inch gas strut set if you’re replacing worn or weak lift supports on a camper shell, truck topper, snugtop canopy, rear window or toolbox lid and your OEM part or measurements match the listed specifications. It’s aimed at DIYers, fleet maintenance teams, and vehicle owners who want a direct-fit, reliable replacement with clear interchange references and manufacturer support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I replace one old gas strut with this 17-inch AUCLIDIS set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—replace both for balanced lift, but you can fit one if dimensions and 10mm ball sockets match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What measurements confirm a correct replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Match center-to-center lengths: 17.13\" extended, 10.75\" compressed, 10mm ball sockets, and 28 lb (125 N) force.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55163757527383,"sku":"B0D46FF7SP","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-front-view-17in-gas-struts.jpg?v=1790347110"},{"product_id":"auclidis-hood-lift-supports-for-dodge-charger-chrysler-300-2011-2022-set-of-2-oem-fit-gas-struts","title":"AUCLIDIS Bonnet Struts for Dodge Charger \u0026 Chrysler 300 (2011–2022) — Set of 2 OEM-fit Gas Struts","description":"\u003cp\u003e\u003cstrong\u003eAUCLIDIS hood lift support set replaces factory bonnet gas struts on Dodge Charger (2011–2020 sedans) and Chrysler 300 (2011–2022), restoring smooth, secure hood opening and holding.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your hood no longer stays open or rises unevenly, these replacement gas struts replicate the original fit and motion for a dependable, factory-style lift. Each pair is built to match the OEM geometry and force so installation is straightforward and the hood behaves the way it did when new. The set is intended for specific vehicle years and body styles—verify fit before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lift supports match factory performance?\u003c\/h3\u003e\n\u003cp\u003eAUCLIDIS designed the dampers to mirror OEM lengths, stroke, and mounting ball locations so they provide the same lift force and travel as the originals. That consistency keeps hood alignment and opening speed within factory tolerances.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length: 13.62 inches (ball center to ball center)\u003c\/li\u003e\n  \u003cli\u003eCompressed length: 8.43 inches (ball center to ball center)\u003c\/li\u003e\n  \u003cli\u003eStroke: 5.19 inches for correct travel\u003c\/li\u003e\n  \u003cli\u003eInterchanges with listed OEM part numbers for proper specification match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these install without special tools or modifications?\u003c\/h3\u003e\n\u003cp\u003eYes—installation is designed to be quick and user-friendly, requiring no cutting, drilling, or custom adapters. The struts attach at the factory ball-stud mounts and can be swapped out in a few simple steps, saving time compared with more complex repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit replacement to original ball-stud mounts\u003c\/li\u003e\n  \u003cli\u003eThree-step removal and installation process—no professional tools required\u003c\/li\u003e\n  \u003cli\u003eWorks with existing hood hardware and brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers are compatible with these struts?\u003c\/h3\u003e\n\u003cp\u003eThis gas strut set is manufactured specifically for the front hood of Dodge Charger sedans (2011–2020) and Chrysler 300 (2011–2022). It cross-references multiple OEM part numbers so you can confirm compatibility by checking your original strut markings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFit: Dodge Charger 2011–2020 (sedan only) and Chrysler 300 2011–2022\u003c\/li\u003e\n  \u003cli\u003eCompatible OEM references: 55113776AA, 55113777AA, 55113776AC, and related interchange numbers\u003c\/li\u003e\n  \u003cli\u003eAlso cross-references part codes like 5B893899, 893899, SG314073 for verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these replacement hood shocks?\u003c\/h3\u003e\n\u003cp\u003eAUCLIDIS constructs these gas springs to deliver reliable lift over many cycles, with seals and gas pressure calibrated to resist common wear modes. A manufacturer-backed replacement guarantee and customer support help address fit or performance issues after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to OEM pressure and seal standards for consistent performance\u003c\/li\u003e\n  \u003cli\u003eMeant to restore smooth, controlled hood motion and secure hold-open\u003c\/li\u003e\n  \u003cli\u003e12-month replacement guarantee and responsive customer service included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This AUCLIDIS hood lift support set is aimed at owners or technicians who need a true-to-original replacement for the front hood gas struts on Dodge Charger sedans (2011–2020) or Chrysler 300 (2011–2022). It’s suitable for DIY installers who want a fast, no-modification swap and for repair shops needing an OEM-spec alternative backed by a 12-month replacement warranty.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these gas struts fit my Dodge Charger or Chrysler 300?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit Dodge Charger sedans 2011–2020 and Chrysler 300 2011–2022. Check your original part number against the listed interchange codes to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install them myself without special tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These are designed for simple removal and snap-on installation at the factory ball-stud mounts with minimal tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55164042150231,"sku":"B0F6L4H937","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-front-packaging-hood-lift-support.jpg?v=1790349192"},{"product_id":"auclidis-17-gas-strut-set-45-lb-200n-17-13-extended-10mm-nylon-ball-sockets-set-of-2","title":"AUCLIDIS 17\" Gas Strut Set 45 lb (200N) — 17.13\" Extended, 10mm Nylon Ball Sockets, Set of 2","description":"\u003cp\u003e\u003cstrong\u003eAUCLIDIS 17 inch gas strut set (45lb\/200N) — a direct-fit replacement lift support designed for camper shells, truck toppers, canopies and toolbox lids that use 10mm nylon ball sockets.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Leer camper shell, SnugTop topper or toolbox lid no longer stays open or the original struts have lost pressure, these AUCLIDIS gas shocks restore smooth, controlled lifting and secure hold. This pair replaces common OEM numbers and offers the same key dimensions and connection style so you can swap them in without modifying your vehicle. The package contains two 17\" struts with 10mm nylon ball sockets at both ends and a 12-month replacement warranty backed by AUCLIDIS support.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these gas struts match my existing camper shell hardware?\u003c\/h3\u003e\n\u003cp\u003eThese struts are built to match common OEM measurements and mounting styles used on many camper shells and truck toppers. Use the part numbers stamped on your old struts to confirm interchangeability, then compare lengths and socket sizes to ensure fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended center-to-center length: 17.13 inches (nominal 17\")\u003c\/li\u003e\n  \u003cli\u003eCompressed center-to-center length: 10.75 inches\u003c\/li\u003e\n  \u003cli\u003eNylon ball socket diameter: 10mm at both ends (shaft and body)\u003c\/li\u003e\n  \u003cli\u003eForce rating: 45 lb \/ 200 N suitable for medium-weight lids\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these supports physically fit my Leer or SnugTop topper?\u003c\/h3\u003e\n\u003cp\u003eThey are compatible with many Leer and SnugTop applications when dimensions and ball socket sizes match your original parts. Confirm compatibility by checking the OEM or interchange numbers printed on your existing struts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInterchangeable part references include C16-04270, C16-05209 and related numbers\u003c\/li\u003e\n  \u003cli\u003eDesigned for camper shell doors, topper caps, canopy windows and toolboxes\u003c\/li\u003e\n  \u003cli\u003eDirect replacement of struts that use 10mm nylon ball mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability can I expect from a 45lb (200N) strut?\u003c\/h3\u003e\n\u003cp\u003eA 45 lb (200 N) gas strut provides moderate lift force that balances opening assistance with steady support while preventing sudden drops. These are intended for lids and doors of moderate weight such as small camper windows, topper access panels, and lighter toolboxes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStable lift and hold for medium-weight lids and hatches\u003c\/li\u003e\n  \u003cli\u003eSmooth extension and compression thanks to sealed gas cylinder design\u003c\/li\u003e\n  \u003cli\u003eDual-pack ensures both sides of a hatch can be replaced simultaneously\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what support does AUCLIDIS offer?\u003c\/h3\u003e\n\u003cp\u003eThe shipment includes two identical 17\" gas struts ready to install using your existing 10mm ball mounts. AUCLIDIS provides a 12-month replacement guarantee and customer service to assist with fit questions or warranty claims.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContents: two AUCLIDIS 17.13\" extended gas struts (set of 2)\u003c\/li\u003e\n  \u003cli\u003eMounting: fitted with 10mm nylon ball sockets for easy snap-on installation\u003c\/li\u003e\n  \u003cli\u003eSupport: 12-month replacement warranty and responsive customer service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These AUCLIDIS 17\" 45 lb gas struts are intended for truck owners, RV and camper shell users, and anyone replacing worn lift supports on Leer or SnugTop toppers, canopy doors, and light-duty toolboxes. If your original strut lists a compatible interchange number or has the same center-to-center lengths and 10mm ball connectors, this set offers a straightforward, reliable replacement with manufacturer support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm these struts will fit my camper shell?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare your old strut's center-to-center lengths (extended and compressed), 10mm ball socket size, and any OEM\/interchange numbers to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these gas struts myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They snap onto 10mm nylon ball mounts and typically install without special tools, but follow safety precautions for supporting the lid during replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55164164374871,"sku":"B0D46G68XQ","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-front-packaging-17in-gas-struts.jpg?v=1790351090"},{"product_id":"auclidis-17-40-lb-gas-strut-pair-for-camper-shells-truck-toppers-10mm-ball-sockets-set-of-2","title":"AUCLIDIS 17\" 40 lb Gas Strut Pair for Camper Shells \u0026 Truck Toppers — 10mm Ball Sockets, Set of 2","description":"\u003cp\u003e\u003cstrong\u003eAUCLIDIS 17-inch gas strut pair delivers a 40 lb (178 N) lift to open and hold camper shell, truck topper, canopy, and toolbox doors smoothly and reliably.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement lift supports are designed to match OEM fitments for many camper shells and truck caps. Each set includes two gas struts engineered to replace original cylinders using the same ball-socket fittings, restoring proper lift and secure hold for hatches, windows, and access panels. Before ordering, check the OEM or existing part number stamped on your current strut to ensure full interchange compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm this strut fits my shell or topper?\u003c\/h3\u003e\n\u003cp\u003eVerify fit by comparing the part numbers and the ball-center measurements on your current struts. This AUCLIDIS set lists several interchange references that commonly match factory replacements for camper shells and utility lids.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare OEM numbers: C1606874, C16-06874, SG359011, C16-33312, and listed equivalents.\u003c\/li\u003e\n  \u003cli\u003eMeasure extended length: 17.13 inches from ball center to ball center.\u003c\/li\u003e\n  \u003cli\u003eConfirm compressed length: 10.75 inches center-to-center when closed.\u003c\/li\u003e\n  \u003cli\u003eCheck connector size: 10 mm nylon ball sockets on both ends.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat lifting power and motion should I expect from these gas springs?\u003c\/h3\u003e\n\u003cp\u003eEach strut provides approximately 40 pounds (178 newtons) of force, suitable for moderate-weight doors and access panels. They supply steady, damped opening and a reliable hold when fully extended, reducing slams and making access safer and easier.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated force: 40 lb \/ 178 N per strut for consistent lift.\u003c\/li\u003e\n  \u003cli\u003eSmooth gas-damped motion for controlled opening and closing.\u003c\/li\u003e\n  \u003cli\u003eDual strut set supports balanced lifting of larger lids or windows.\u003c\/li\u003e\n  \u003cli\u003eDurable construction for repeated daily use in outdoor conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these struts installed and what hardware will I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward when the original ball-socket fittings are present on your vehicle. The 10 mm nylon ball sockets snap onto compatible studs; typical installation requires supporting the hatch while swapping the old struts for the new ones.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSnap-on installation to 10 mm ball studs, no special tools for the socket connection.\u003c\/li\u003e\n  \u003cli\u003eSupport the hatch safely while removing the old struts to avoid injury.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle lacks ball studs, you may need to install compatible mounting hardware.\u003c\/li\u003e\n  \u003cli\u003eReplace the pair at the same time for balanced performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this suited for? This AUCLIDIS replacement set is aimed at owners of camper shells, truck toppers, canopies, and toolbox lids who need a direct-fit gas strut swap. It's ideal for DIYers and professional technicians who prefer parts that match OEM reference numbers and restore factory-like lift performance. If your current gas springs show sagging, slow movement, or fail to hold the hatch open, these 17-inch, 40 lb struts provide a like-for-like replacement backed by AUCLIDIS customer support and a 12-month replacement warranty.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these gas struts sold as a pair?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the package contains two 17-inch gas struts for balanced replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the mounting connector size?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Both ends use 10 mm nylon ball socket connectors compatible with standard studs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55164164342103,"sku":"B0CWXRBQ85","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-front-view-packaging.jpg?v=1790351093"},{"product_id":"auclidis-hood-strut-55113748aa-direct-fit-gas-hood-lift-for-jeep-grand-cherokee-2011-2021-dodge-durango-2011-2022-oem-replace","title":"AUCLIDIS Bonnet Strut 55113748AA — Direct-Fit Gas Hood Lift for Jeep Grand Cherokee 2011–2021 \u0026 Dodge Durango 2011–2022, OEM Replace","description":"\u003cp\u003e\u003cstrong\u003eAUCLIDIS 55113748AA is a direct-fit gas hood lift that replaces the front bonnet strut on 2011–2021 Jeep Grand Cherokee and 2011–2022 Dodge Durango models, restoring smooth, reliable hood support.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf the factory hood prop on your Jeep Grand Cherokee or Dodge Durango is failing, this AUCLIDIS gas strut offers an OEM-style replacement engineered to match the original geometry and performance. It replicates the manufacturer specifications and mounting points so you can swap the worn strut without welding, drilling, or custom brackets. Built for straightforward DIY replacement, it helps return consistent lift and hold to the vehicle’s front bonnet.\u003c\/p\u003e\n\n\u003ch3\u003eWill this strut fit my Jeep Grand Cherokee or Dodge Durango?\u003c\/h3\u003e\n\u003cp\u003eYes — this gas lift is manufactured to match the mounting and dimensions used on the specified model years, making it a direct replacement for the original hood support. Check your vehicle year range and listed part numbers to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2011–2021 Jeep Grand Cherokee and 2011–2022 Dodge Durango.\u003c\/li\u003e\n  \u003cli\u003eInterchangeable with OEM references: 5511 3748AA, 55113748AA, 765527, PM3654, SG214069, 877865.\u003c\/li\u003e\n  \u003cli\u003eDesigned for front hood\/bonnet application matching factory mounting balls.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the strut dimensions and how do they affect fit?\u003c\/h3\u003e\n\u003cp\u003eThe AUCLIDIS strut uses precise center-to-center ball measurements to ensure clearance and correct hood travel. Knowing the compressed and extended lengths helps you verify whether the lift clears your build and aligns with existing mounting points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length (ball center to ball center): 22.24 inches.\u003c\/li\u003e\n  \u003cli\u003eCompressed length (ball center to ball center): 13.22 inches.\u003c\/li\u003e\n  \u003cli\u003eStroke (usable travel): 9.02 inches for proper lift and hold range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed for quick, tool-light replacement so most owners can complete it in minutes. The strut snaps onto existing ball studs and removes from the old unit the same way, eliminating the need for specialized tools or bodywork.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple three-step swap: remove old strut, align new strut, snap onto ball studs.\u003c\/li\u003e\n  \u003cli\u003eNo drilling or trimming required when matching OEM mounting points.\u003c\/li\u003e\n  \u003cli\u003eIdeal for DIYers; basic hand tools or none at all for many installs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kind of warranty and support does AUCLIDIS provide?\u003c\/h3\u003e\n\u003cp\u003eAUCLIDIS backs this hood strut with an 18-month replacement guarantee and customer assistance to help with fitment or post-purchase questions. If you encounter any problem during installation or early life, their support team is available to advise or arrange a replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e18-month replacement guarantee for peace of mind.\u003c\/li\u003e\n  \u003cli\u003eDedicated customer support team available online for fitment help.\u003c\/li\u003e\n  \u003cli\u003eReplacement aligns with verified OEM spec replication.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This AUCLIDIS hood strut is intended for Jeep Grand Cherokee and Dodge Durango owners (model years listed) who need a dependable, direct-fit replacement for a weakened or failed bonnet gas spring. It’s a fit for do-it-yourself mechanics, fleet maintenance teams, and anyone preferring an OEM-spec swap without modification. If you want to restore safe, controlled hood opening and secure holding without altering factory mounting, this replacement strut provides the correct lengths, compatible part references, and a backed warranty to simplify the repair.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this an exact OEM replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It matches OEM specifications and listed interchange numbers for direct-fit replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long is the warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: AUCLIDIS provides an 18-month replacement guarantee and online customer support.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55164205760855,"sku":"B0F9TR8WBY","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-hood-strut-front-view.jpg?v=1790351276"},{"product_id":"auclidis-hood-shock-strut-lift-supports-for-cadillac-cts-2014-2019-set-of-2-direct-fit-oem-length-ball-stud-mounts","title":"AUCLIDIS Hood Shock Strut Lift Supports for Cadillac CTS 2014-2019, Set of 2 — Direct-Fit OEM-Length, Ball-Stud Mounts","description":"\u003cp\u003e\u003cstrong\u003eAUCLIDIS hood shock strut set replaces your Cadillac CTS 2014–2019 front hood lift supports for smooth, OEM-style opening and reliable hold.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe AUCLIDIS pair of hood gas springs is engineered as a direct-fit replacement for Cadillac CTS sedans and coupes from 2014 through 2019. These struts match key OEM interchange numbers and dimensions so you can swap worn or weak lift supports without modifying the hood or mounting points. Built to restore the original lift force and travel, this set is sold as two matching gas springs with end ball-stud fittings for straightforward vehicle installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these hood struts improve daily use of my Cadillac CTS?\u003c\/h3\u003e\n\u003cp\u003eReplacing tired or leaking gas springs returns consistent hood lift and safe hold-open behavior, preventing sudden drops and awkward manual support. The AUCLIDIS units are calibrated to the same stroke and force profile as the original parts so opening effort and hood position stay as the manufacturer intended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact-fit ball-to-ball lengths: 16.30\" extended, 9.96\" compressed.\u003c\/li\u003e\n  \u003cli\u003eStroke of 6.34\" for the correct travel range and leverage.\u003c\/li\u003e\n  \u003cli\u003eRestores steady, controlled hood opening and holding force.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these struts fit my car and replace the original part numbers?\u003c\/h3\u003e\n\u003cp\u003eYes — AUCLIDIS hood shocks are designed to match common OEM interchange numbers used on the Cadillac CTS. Confirm fitment by checking the part numbers stamped on your existing strut or the vehicle parts list to ensure proper replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 22784840, 590815, 755526, 887656 and 4B-755526.\u003c\/li\u003e\n  \u003cli\u003eDirect replacement with no modification to hood mounts required.\u003c\/li\u003e\n  \u003cli\u003eMade to the same mounting ball-stud configuration as OEM units.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation, and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intentionally simple and can be completed in a few minutes without specialized equipment. Each strut uses snap-on ball fittings that detach and attach with basic hand tools or even by hand in some cases; typical installs follow three straightforward steps: remove the old strut, align the new unit, and snap both ends onto the ball studs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo drilling, cutting, or welding required — true plug-and-play replacement.\u003c\/li\u003e\n  \u003cli\u003eCommon household tools (flat screwdriver or pliers) are sufficient if needed.\u003c\/li\u003e\n  \u003cli\u003eOne-person install possible when hood is safely supported.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact specifications so I can compare before buying?\u003c\/h3\u003e\n\u003cp\u003eAUCLIDIS lists clear measurement details so you can verify compatibility before purchase. These physical dimensions and stroke are critical for matching geometry and ensuring correct hood angle and travel after replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length (ball center to ball center): 16.30 inches.\u003c\/li\u003e\n  \u003cli\u003eCompressed length (ball center to ball center): 9.96 inches.\u003c\/li\u003e\n  \u003cli\u003eStroke (usable travel): 6.34 inches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This hood support set is intended for Cadillac CTS owners or technicians who need a reliable, OEM-compatible replacement for weakened or damaged front hood struts on 2014–2019 models. It’s a practical purchase for DIY enthusiasts, independent shops, and anyone seeking a direct-fit, dimension-matching solution with a simple install and clearly listed interchange references.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these struts fit all Cadillac CTS models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit Cadillac CTS model years 2014–2019 for the front hood; verify part numbers on your original strut to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools are required to install the AUCLIDIS hood struts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools required; a flat screwdriver or pliers may help remove and snap on the ball fittings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55165191389527,"sku":"B0F6L1J6D6","price":34.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-front-packaging-hood-struts.jpg?v=1790354717"},{"product_id":"auclidis-18-inch-gas-strut-set-40-lb-178-n-2-pack-camper-shell-truck-topper-lift-supports-10-mm-ball-ends","title":"AUCLIDIS 18-inch Gas Strut Set 40 lb (178 N) — 2-Pack Camper Shell \u0026 Truck Topper Lift Supports, 10 mm Ball Ends","description":"\u003cp\u003e\u003cstrong\u003eAUCLIDIS 18-inch gas struts (40 lb \/ 178 N), model C16-20651\/C16-33313, are a direct-fit replacement set of two designed to lift and support camper shell doors, truck toppers, canopies, and toolboxes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf a worn or weak lift support on your camper shell, Leer topper, SnugTop cap, or toolbox lid is making openings heavy, unsteady, or difficult to keep open, these replacement gas struts restore smooth, controlled motion. The pair matches common OEM interchange numbers so you can confirm fit by comparing the stamped part number on your original strut. Each strut uses 10 mm nylon ball-socket ends for quick snap-on installation and measures 18.70 inches extended and 10.82 inches compressed.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this strut fits my camper shell or truck topper?\u003c\/h3\u003e\n\u003cp\u003eCheck the stamped part number on your existing strut and compare it to the interchange list provided. If your original shows any of the listed compatible numbers, this AUCLIDIS set will match the length and ball-socket connections needed for a direct swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare OEM number: C1620651 \/ C16-20651 \/ C16-33313 and others listed.\u003c\/li\u003e\n  \u003cli\u003eMeasure center-to-center length: 18.70 in extended, 10.82 in compressed.\u003c\/li\u003e\n  \u003cli\u003eVerify end fittings: 10 mm nylon ball socket at both ends.\u003c\/li\u003e\n  \u003cli\u003eConfirm required force: 40 lb (178 N) lift support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat strength and measurements should I expect from these lift supports?\u003c\/h3\u003e\n\u003cp\u003eEach strut supplies approximately 40 pounds (178 newtons) of lifting force, suitable for many camper shell doors, small tailgates, and toolbox lids. The specified extended and compressed lengths ensure consistent geometry so your door opens and stays supported without overextension or bottoming out.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated force: 40 lb \/ 178 N per strut.\u003c\/li\u003e\n  \u003cli\u003eExtended length: 18.70 inches center-to-center.\u003c\/li\u003e\n  \u003cli\u003eCompressed length: 10.82 inches center-to-center.\u003c\/li\u003e\n  \u003cli\u003eEnd fittings: 10 mm nylon ball sockets for standard mounts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install or replace these gas struts safely?\u003c\/h3\u003e\n\u003cp\u003eReplacement is straightforward with basic tools; always support the door or hatch while you remove the old strut. Nylon ball-socket ends are designed to snap on and off existing ball studs—no special hardware required if your mount uses 10 mm balls—but keep a helper or prop to prevent sudden closure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProp the door open or use a helper before removal.\u003c\/li\u003e\n  \u003cli\u003eUse a flat screwdriver to release retaining clips if present.\u003c\/li\u003e\n  \u003cli\u003eSnap socket ends onto ball studs until they click into place.\u003c\/li\u003e\n  \u003cli\u003eTest opening\/closing motion and confirm secure fit at both ends.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect in terms of durability and warranty?\u003c\/h3\u003e\n\u003cp\u003eAUCLIDIS constructs these gas struts for daily use on exterior vehicle fittings, resisting routine exposure and motion. The product ships as a set of two, and AUCLIDIS backs the purchase with customer support and a 12-month replacement warranty against manufacturing defects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured for exterior vehicle applications like camper shells and toolboxes.\u003c\/li\u003e\n  \u003cli\u003eSet includes two matching 18-inch gas struts.\u003c\/li\u003e\n  \u003cli\u003e12-month replacement guarantee from AUCLIDIS.\u003c\/li\u003e\n  \u003cli\u003eCustomer service available for fitment or replacement help.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This AUCLIDIS gas strut set is aimed at vehicle owners, RV and truck enthusiasts, and repair technicians who need a reliable, OEM-compatible replacement for worn lift supports on camper shells, Leer or SnugTop toppers, canopies, and small tailgate or toolbox lids. If you have an original strut with a compatible part number or require an 18-inch, 40 lb-rated lift support with 10 mm ball-socket fittings, this set provides a cost-effective swap with clear installation steps and a one-year manufacturer backing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these gas struts a direct OEM replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—compare the stamped OEM numbers (like C16-20651, C16-33313) and the 18.70\"\/10.82\" lengths to confirm direct compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these come as a pair and include warranties?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the package contains two 18\" gas struts and includes a 12-month replacement guarantee from AUCLIDIS.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55166400528727,"sku":"B0CWXL223K","price":37.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-front-packaging-18in-gas-struts.jpg?v=1790367973"},{"product_id":"auclidis-20-in-gas-struts-80-lb-set-of-2-10-mm-ball-sockets-19-69-12-20-lift-supports","title":"AUCLIDIS 20 in Gas Struts 80 lb Set of 2 — 10 mm Ball Sockets, 19.69\"\/12.20\" Lift Supports","description":"\u003cp\u003e\u003cstrong\u003eAUCLIDIS C16-08053 is a pair of 20-inch, 80 lb (356 N) gas struts engineered to replace worn lift supports on RV beds, underbed storage, tonneau covers, hatches and similar hinged panels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement set of two gas struts offers a direct-fit option for many RV, marine and automotive lift applications where a 19.69\" extended and 12.20\" compressed center-to-center length is required. Constructed with 10 mm nylon ball sockets on both ends, these shocks deliver controlled lifting and holding force suited to lids, doors and storage compartments. Check the original OEM or stamped interchange number to confirm compatibility before purchasing.\u003c\/p\u003e\n\n\u003ch3\u003eWill these gas struts fit my RV bed, hatch or tonneau cover?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on matching the center-to-center lengths, shaft and body end fittings, and the force rating of your original strut. Compare the extended length (19.69\"), compressed length (12.20\") and the 10 mm nylon ball socket connections to your existing units. The listing includes a long interchange list to help you cross-reference common OEM numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length: 19.69 inches (center-to-center)\u003c\/li\u003e\n  \u003cli\u003eCompressed length: 12.20 inches (center-to-center)\u003c\/li\u003e\n  \u003cli\u003eEnd fittings: 10 mm nylon ball sockets on shaft and body\u003c\/li\u003e\n  \u003cli\u003eRated force: 80 lb \/ 356 N per strut\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install these 20\" lift supports safely and correctly?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic hand tools. Support the hatch or lid before removing old struts, then detach the ball-socket clips and snap the new sockets onto the existing ball studs; no special tools are required for most mounts. Always replace struts in matching pairs and test operation slowly to ensure correct orientation and torque.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSecure the lid open with a prop or assistant before removing old struts\u003c\/li\u003e\n  \u003cli\u003eRemove retaining clips from ball sockets and lift off old struts\u003c\/li\u003e\n  \u003cli\u003eSnap new 10 mm nylon ball sockets onto ball studs until they click\u003c\/li\u003e\n  \u003cli\u003eCheck smooth travel and matching force on both sides\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat applications are these gas shocks designed for?\u003c\/h3\u003e\n\u003cp\u003eThese gas struts were made for a wide range of hinged panels across recreational, marine and utility uses. Typical installations include RV beds, underbed storage compartments, camper doors, tool boxes, boat hatches and tonneau covers. They are also suitable for custom cabinetry, tanning beds and similar lift mechanisms where the dimensional and force specs align.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRV bed covers, under-bed storage doors and camper cabinets\u003c\/li\u003e\n  \u003cli\u003eTruck bed tonneau covers and toolbox lids\u003c\/li\u003e\n  \u003cli\u003eBoat hatch lids, engine covers, and marine compartments\u003c\/li\u003e\n  \u003cli\u003eCustom windows, tanning beds, and furniture lift panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are AUCLIDIS gas struts and what support comes with them?\u003c\/h3\u003e\n\u003cp\u003eEach strut is designed for repeated cycles in common lift applications and uses nylon ball sockets for corrosion-resistant connections. AUCLIDIS backs this product with a 12-month replacement guarantee and customer support for fitment or installation questions. Proper installation, matched pairs, and selecting the correct interchange number help maximize service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant nylon ball socket connections\u003c\/li\u003e\n  \u003cli\u003e12-month replacement guarantee from AUCLIDIS\u003c\/li\u003e\n  \u003cli\u003eDedicated customer service for fitment guidance\u003c\/li\u003e\n  \u003cli\u003eSold as a set of two for balanced operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This set is ideal for RV owners, boat enthusiasts, automotive DIYers and tradespeople who need a reliable 20\" 80 lb replacement lift support with 10 mm ball-socket ends. If you’re maintaining or refurbishing hinged panels—like bed covers, hatches or tonneau lids—and your original struts match the listed lengths and interchange numbers, this AUCLIDIS pair offers a direct, cost-effective swap backed by a one-year replacement policy.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these gas struts sold as a pair?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this listing includes two matching 20\" gas struts for balanced installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm compatibility with my original strut?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Match the extended 19.69\" and compressed 12.20\" center-to-center lengths, 10 mm ball sockets, and the 80 lb force rating.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55166836867415,"sku":"B0CWXVK5ZH","price":38.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-front-view-pair.jpg?v=1790372383"},{"product_id":"auclidis-20-inch-gas-struts-60-lb-set-of-2-19-69-12-20-c-c-nylon-10-mm-ball-ends-for-rv-hatches-tonneau-covers","title":"AUCLIDIS 20-Inch Gas Struts 60 lb Set of 2 — 19.69\"\/12.20\" C-C, Nylon 10 mm Ball Ends for RV Hatches \u0026 Tonneau Covers","description":"\u003cp\u003e\u003cstrong\u003eAUCLIDIS C16-08260 is a pair of 20-inch gas struts rated at 60 lb (267 N), built to replace factory lift supports on RV cargo doors, engine hatches, tonneau covers and other lids that need controlled lifting and holding.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese gas springs provide a direct replacement option for many OEM part numbers and common applications where reliable lift assistance and stable positioning are required. Each set contains two identical struts with nylon ball-socket ends for quick installation, and AUCLIDIS backs the product with a 12-month replacement guarantee and customer support to help confirm fitment.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm these will fit my hatch or bed cover?\u003c\/h3\u003e\n\u003cp\u003eMeasure the original gas strut from ball center to ball center in both the compressed and extended positions, then compare those dimensions to the AUCLIDIS spec. Also check the socket diameter and compatible OEM reference numbers stamped on your current strut to ensure an accurate swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length: 19.69 inches (center-to-center)\u003c\/li\u003e\n  \u003cli\u003eCompressed length: 12.20 inches (center-to-center)\u003c\/li\u003e\n  \u003cli\u003eEnd fittings: 10 mm nylon ball sockets at both ends\u003c\/li\u003e\n  \u003cli\u003eCross-reference common OEM numbers like GSNI-5300-60, 4450, C1608260\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat lifting force and performance should I expect?\u003c\/h3\u003e\n\u003cp\u003eEach gas strut in this set delivers approximately 60 pounds (267 N) of push force, designed to assist with lifting and holding medium-weight lids and panels. The force rating provides a balance of smooth opening and secure support without slamming or sudden drops when correctly matched to the application.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated force: 60 lb \/ 267 N per strut\u003c\/li\u003e\n  \u003cli\u003eDesigned for controlled opening and steady holding\u003c\/li\u003e\n  \u003cli\u003eSuitable for lids, hatches, and covers requiring moderate lift assistance\u003c\/li\u003e\n  \u003cli\u003ePairs for symmetrical support on dual-mount installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain these gas lift supports?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward when the replacement matches the original length and end fittings: snap the nylon ball sockets onto the matching ball studs and secure any retaining clips. Maintenance is minimal—keep the piston rod clean and avoid drilling or welding the body; replace the pair if leaks or loss of force occur.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSnap-on nylon 10 mm ball-socket connections for fast fitment\u003c\/li\u003e\n  \u003cli\u003eInstall as a matched pair for balance and longevity\u003c\/li\u003e\n  \u003cli\u003eWipe the piston rod free of dirt and debris regularly\u003c\/li\u003e\n  \u003cli\u003eAvoid modifying the cylinder or exposing it to corrosive chemicals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: AUCLIDIS C16-08260 gas struts are aimed at RV owners, boaters, DIY mechanics and installers who need a reliable, direct-fit replacement for cargo doors, engine hatches, tanning beds, tonneau covers, camper shells, and storage lids. If your original strut matches the given dimensions or one of the listed interchange part numbers, this set offers an affordable upgrade with easy installation and AUCLIDIS customer service support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these gas struts come as a matched pair?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The product ships as a set of two identical 20-inch gas struts for balanced installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What if the length or part number doesn’t match my original?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Measure center-to-center compressed and extended; if different, contact AUCLIDIS support for the correct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55166836932951,"sku":"B0CWXVYWPM","price":38.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-front-packaging-20-inch-gas-struts.jpg?v=1790372384"},{"product_id":"auclidis-27-gas-struts-45-lb-200n-set-of-2-27in-x-15-2in-tonneau-cover-lift-supports-with-10mm-ball-sockets","title":"AUCLIDIS 27\" Gas Struts 45 lb (200N) Set of 2 — 27in x 15.2in Tonneau Cover Lift Supports with 10mm Ball Sockets","description":"\u003cstrong\u003eThese AUCLIDIS ST270EDI-45 gas struts are 27-inch, 45 lb (200 N) lift supports sold as a set of two for replacing worn or broken tonneau cover shocks on pickup bed covers and toppers.\u003c\/strong\u003e\n\n\u003cp\u003eDesigned as direct-fit replacements for many tonneau covers and truck shell toppers, the ST270EDI-45 struts restore smooth opening and secure holding of lids and covers. Each piston uses matching 10 mm nylon ball sockets at both ends and arrives with an installation guide and a 12-month replacement warranty. Before ordering, check your existing cylinder for an OEM or interchange number to confirm compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exact measurements and force ratings does this gas strut use?\u003c\/h3\u003e\n\u003cp\u003eThese struts measure 27.00 inches when fully extended and 15.20 inches when compressed, both distances taken center-to-center at the ball sockets. The working force is rated at 45 pounds (200 N), suitable for medium-weight tonneau lids and truck toppers that require steady lift assistance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended length: 27.00 inch (ball center to ball center)\u003c\/li\u003e\n  \u003cli\u003eCompressed length: 15.20 inch (ball center to ball center)\u003c\/li\u003e\n  \u003cli\u003eForce: 45 lb \/ 200 N\u003c\/li\u003e\n  \u003cli\u003eBall socket diameter: 10 mm nylon at shaft and body\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich original part numbers or interchange codes match the ST270EDI-45?\u003c\/h3\u003e\n\u003cp\u003eThe AUCLIDIS ST270EDI-45 cross-references several common OEM and aftermarket codes, so you can verify fitment by comparing the number on your existing strut. Use the interchange list on the original cylinder as a guide to pick the correct replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon interchange codes include ST270P45EZ10, ST270EDi45, ST270PU45\u003c\/li\u003e\n  \u003cli\u003eAlso referenced as ML26-45, SL26-45, IH1212GS and related variants\u003c\/li\u003e\n  \u003cli\u003eCheck your current cylinder for a matching code before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install these replacement gas shocks on my pickup bed cover?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically straightforward: remove the old struts from their ball studs, align the new strut sockets on the studs, and snap each socket into place. The included installation guide outlines step-by-step alignment; basic hand tools may be required to access mounting points or remove retaining clips.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShips as a set of two struts plus an installation guide\u003c\/li\u003e\n  \u003cli\u003eSnap-on 10 mm nylon ball sockets for quick attachment\u003c\/li\u003e\n  \u003cli\u003eUse appropriate safety supports when removing old struts from heavy lids\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This replacement set is built for truck owners, professional installers, and DIY enthusiasts who need reliable lift support for tonneau covers, shell tops, or truck toppers. It's a practical choice when your existing shocks leak, weaken, or fail to hold the lid open; confirm fitment with your original part number for the best match.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these struts fit my tonneau cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare your current strut's center-to-center lengths and OEM number to the ST270EDI-45 specs: 27\" extended, 15.2\" compressed, 10mm ball sockets, 45 lb force.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do they come as a pair and include instructions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the product ships as a set of two gas struts and includes an installation guide and a 12-month replacement guarantee.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUCLIDIS","offers":[{"title":"Default Title","offer_id":55167184011607,"sku":"B0DBDL8D6H","price":39.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/auclidis-27-inch-gas-strut-front-view.jpg?v=1790377590"}],"url":"https:\/\/britishgarage.co.uk\/collections\/auclidis.oembed","provider":"British Garage","version":"1.0","type":"link"}