{"title":"Autoround","description":"\u003cp\u003eBrowse 31 Autoround products at British Garage, including engine cooling \u0026amp; air con parts. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked UK delivery on every order and 30-day returns.\u003c\/p\u003e","products":[{"product_id":"autoround-front-wheel-bearing-hub-assembly-2-pack-6-lug-w-abs-direct-fit-replacement","title":"Autoround Front Wheel Bearing Hub Assembly 2-Pack — 6-Lug w\/ABS, Direct-Fit Replacement","description":"\u003cp\u003e\u003cstrong\u003eAutoround 513188 is a direct-fit front wheel bearing hub assembly (2-pack) designed to replace worn hubs on select Chevy, GMC, Buick, Saab and Isuzu SUVs and pickups with 6-lug wheels and ABS.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a wheel hub or bearing shows noise, looseness, or ABS sensor warnings, swapping in a properly specified hub assembly restores safe wheel mounting and ABS function. The Autoround 513188 assemblies are built to match OE fitment for the listed vehicles and come as a pair so both front hubs can be refreshed at the same time for balanced performance.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this hub assembly fit?\u003c\/h3\u003e\n\u003cp\u003eThis 513188 hub is compatible with multiple GM-platform SUVs and the Isuzu Ascender and Saab 9-7x that share the same front hub design. It replaces many OE references so mechanics can cross-check fit before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment includes: 2003–2006 Chevy SSR; 2002–2009 Chevy Trailblazer and 2002–2006 Trailblazer EXT;\u003c\/li\u003e\n  \u003cli\u003e2002–2009 GMC Envoy, 2002–2006 Envoy XL, 2004–2005 Envoy XUV;\u003c\/li\u003e\n  \u003cli\u003e2004–2007 Buick Rainier, Isuzu Ascender, Oldsmobile Bravada, Saab 9-7x where applicable;\u003c\/li\u003e\n  \u003cli\u003eOE cross references: 513188, 8151308580, H513188, BR930470, 12413037 and similar numbers for verification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the 513188 assembly handle ABS and wheel mounting needs?\u003c\/h3\u003e\n\u003cp\u003eThe assembly includes an integrated wheel bearing and tone ring compatible with ABS systems used on the covered models. That means the hub provides the sensor reference surface required for correct ABS readings and secure 6-lug wheel mounting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated ABS-compatible tone ring for sensor signal consistency;\u003c\/li\u003e\n  \u003cli\u003e6-lug flange to match factory wheel bolt pattern and torque specs;\u003c\/li\u003e\n  \u003cli\u003eFlange diameter 5.92 inches and flange offset 1.85 inches for accurate wheel positioning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and installation expectations?\u003c\/h3\u003e\n\u003cp\u003eAutoround wheel bearing and hub assemblies are manufactured and tested to meet or exceed common OEM performance criteria. The units come pre-assembled so installation is faster than pressing in a separate bearing and race, and they simplify front-end service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled hub and bearing for quicker replacement and fewer tools;\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined mounting surfaces to ensure proper fit and wheel alignment;\u003c\/li\u003e\n  \u003cli\u003eManufacturer-backed QA and a three-year quality assurance period for buyer support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical details should I check before ordering?\u003c\/h3\u003e\n\u003cp\u003eConfirm your vehicle’s year, model, axle side, and wheel lug count, and compare current part numbers to the listed cross-references. Also verify ABS tone ring presence and flange measurements if your vehicle has non-standard wheels or aftermarket modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify 6-lug configuration and ABS requirement on your vehicle;\u003c\/li\u003e\n  \u003cli\u003eMatch OE part number or compare flange diameter (5.92 in) and offset (1.85 in);\u003c\/li\u003e\n  \u003cli\u003eInspect hub mounting surface and axle stub for compatibility before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: technicians, DIY mechanics, and owners of compatible Chevy, GMC, Buick, Saab and Isuzu vehicles who need a direct-fit front hub replacement with ABS compatibility. Choose the Autoround 513188 2-pack when you want pre-assembled hubs that simplify front-end repair and help ensure both sides are refreshed together for consistent wheel handling and brake-sensor performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hub include the ABS tone ring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Autoround 513188 assembly includes an integrated ABS-compatible tone ring for proper sensor signals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this a direct-fit replacement for Trailblazer and Envoy models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s designed as a direct-fit front hub for specified Chevy Trailblazer, GMC Envoy and related models with 6-lug wheels.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55161170198871,"sku":"B0833WBT2L","price":143.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-513188-front-hub-packaging-view.jpg?v=1790322650"},{"product_id":"autoround-rear-wheel-hub-assembly-for-jeep-compass-patriot-2007-2017-pre-assembled-with-abs-tone-ring","title":"Autoround Rear Wheel Hub Assembly for Jeep Compass\/Patriot 2007–2017 — Pre-assembled with ABS Tone Ring","description":"\u003cp\u003e\u003cstrong\u003eThe Autoround 512332 rear wheel hub assembly is a direct-fit replacement hub and bearing unit engineered to restore rear-wheel function and ABS compatibility on specified Jeep, Chrysler and Dodge models.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis precision-engineered hub assembly replaces worn or damaged rear hubs on select Jeep Compass, Patriot, Chrysler 200, Sebring, Dodge Avenger and Caliber vehicles from model years listed by the manufacturer. Built to the original equipment dimensions, the unit includes the hub flange, integrated bearing and ABS tone ring so it installs as a complete replacement and returns correct wheel mounting, rotation and sensor feedback for vehicles with four-wheel ABS systems or FWD rear axles.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and model years does this hub fit?\u003c\/h3\u003e\n\u003cp\u003eThe Autoround 512332 is designed specifically for multiple FWD rear-axle vehicles. Confirm fitment by matching VIN\/body codes and part numbers before purchase to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eJeep Compass (FWD): 2007–2016 (including 2007 with MK body code, USA-built)\u003c\/li\u003e\n  \u003cli\u003eJeep Patriot (FWD): 2007–2017\u003c\/li\u003e\n  \u003cli\u003eChrysler 200: 2011–2014 (FWD)\u003c\/li\u003e\n  \u003cli\u003eDodge Sebring\/Avenger and Caliber: 2007–2014 models with FWD and 4-wheel ABS\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this hub assembly match OEM specifications?\u003c\/h3\u003e\n\u003cp\u003eThis assembly was manufactured to meet or exceed original equipment tolerances for flange dimensions, bolt circle and ABS integration so it aligns with existing wheel studs, rotor mounting and wheel speed sensor function.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlange offset: 2.39 inches\u003c\/li\u003e\n  \u003cli\u003eFlange diameter: 5.54 inches\u003c\/li\u003e\n  \u003cli\u003eBolt circle diameter: 4.5 inches\u003c\/li\u003e\n  \u003cli\u003e5 lug configuration and integrated ABS tone ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the installation and performance expectations?\u003c\/h3\u003e\n\u003cp\u003eThe unit ships as a fully assembled hub and bearing to simplify replacement—no press-in bearing work is required for most installations. Professional installation is recommended to ensure correct torque and ABS sensor alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled hub and bearing for faster replacement\u003c\/li\u003e\n  \u003cli\u003eEngineered for consistent wheel rotation and load handling on rear axles\u003c\/li\u003e\n  \u003cli\u003eCompatible with factory ABS systems to preserve sensor signals\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM part references like HA590216, BR930609, 5105719AB\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support does Autoround provide?\u003c\/h3\u003e\n\u003cp\u003eAutoround backs this wheel hub assembly with a multi-year quality assurance period and customer support to help with fitment questions and post-purchase concerns. Contact Autoround Customer Service if you need assistance identifying the correct replacement or resolving an installation issue.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3 years of QA coverage through Autoround\u003c\/li\u003e\n  \u003cli\u003eCustomer support available via Amazon messaging\u003c\/li\u003e\n  \u003cli\u003eManufacturer-tested to meet or exceed OEM performance standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This hub assembly is intended for owners, mechanics and restoration shops working on affected Jeep Compass, Patriot, Chrysler 200, Dodge Sebring\/Avenger and Caliber models who need a reliable, direct-fit rear hub and bearing replacement with ABS compatibility. If your vehicle shows wheel play, unusual noise from the rear hub area, or ABS warning related to wheel speed, this pre-assembled unit offers a practical solution when matched to the correct model and year.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the 512332 hub include the ABS tone ring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Autoround 512332 ships with the integrated ABS tone ring compatible with factory four-wheel ABS systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I reuse my original wheel studs with this assembly?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typically yes; the pre-assembled unit uses standard 5-lug mounting, but inspect studs for wear and replace if damaged.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55168308904279,"sku":"B08QHQK33P","price":80.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-512332-front-view-hub-assembly.jpg?v=1790399406"},{"product_id":"autoround-front-wheel-hub-assembly-513121-for-1997-2011-impala-integrated-bearing-abs-tone-ring","title":"Autoround Front Wheel Hub Assembly 513121 for 1997–2011 Impala — Integrated Bearing \u0026 ABS Tone Ring","description":"\u003cp\u003e\u003cstrong\u003eThe Autoround 513121 front wheel hub assembly is a direct-fit replacement hub with integrated bearing and ABS tone ring engineered for select 1997–2011 GM front-wheel- and all-wheel-drive vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis hub assembly restores wheel mounting, rotational support and ABS signal reliability without needing separate press-fit bearing installation. Designed as a complete unit, it saves time during service by combining the hub flange, bearing and ABS reluctor into one component that matches OEM mounting patterns and electrical needs for compatible Chevrolet, Buick, Pontiac, Oldsmobile and Cadillac models.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and model years will this hub fit?\u003c\/h3\u003e\n\n\u003cp\u003eThis 513121 hub covers a wide range of GM platforms from the late 1990s through early 2010s. It explicitly fits many FWD and AWD applications across Chevrolet, Buick, Cadillac, Pontiac, Oldsmobile and Saturn lineups. Always verify your vehicle’s year, axle position and OEM part number before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with Impala, Monte Carlo, Uplander, Venture and Montana model years listed in product specs.\u003c\/li\u003e\n  \u003cli\u003eCovers Buick Regal, LeSabre, LaCrosse, Lucerne, Century, Park Avenue, Allure and Terraza applications.\u003c\/li\u003e\n  \u003cli\u003eFits Cadillac DeVille, DTS, Eldorado and Seville FWD models within specified year ranges.\u003c\/li\u003e\n  \u003cli\u003eAlso fits Pontiac Aztek, Bonneville, Grand Prix and Montana AWD\/FWD where noted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the 513121 hub assembly match OEM fit and function?\u003c\/h3\u003e\n\n\u003cp\u003eThe Autoround hub is built to match OEM flange and bolt dimensions so wheel studs and brake components align correctly. It includes an ABS tone ring where applicable to maintain wheel-speed sensor signals. Critical dimensions like flange diameter, offset and bolt circle are specified to ensure consistent fitment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFlange diameter: 5.73 inches; flange offset: 1.65 inches.\u003c\/li\u003e\n  \u003cli\u003eBolt circle diameter: 4.53 inches with 5-lug configuration.\u003c\/li\u003e\n  \u003cli\u003eConfigured for front positions on FWD\/AWD and rear where indicated for AWD.\u003c\/li\u003e\n  \u003cli\u003ePre-assembled bearing and hub eliminate pressing operations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the installation and quality notes for this hub?\u003c\/h3\u003e\n\n\u003cp\u003eThe assembly arrives as a ready-to-install unit intended to simplify replacement and reduce shop time versus separate bearing installs. Autoround reports quality testing to meet or exceed OEM performance parameters, and the design supports normal service procedures for wheel hub replacement. Follow torque specs and service manual steps for safe installation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePre-assembled for faster fitment and fewer specialized tools required.\u003c\/li\u003e\n  \u003cli\u003eDesigned for ABS-equipped systems with integrated reluctor ring.\u003c\/li\u003e\n  \u003cli\u003eQuality-tested to match OEM tolerances for fit and rotation.\u003c\/li\u003e\n  \u003cli\u003eAutoround provides a 3-year QA support period and customer service assistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this hub work with my vehicle’s ABS and brake components?\u003c\/h3\u003e\n\n\u003cp\u003eYes—when the application matches the vehicle list and the vehicle uses a tone-ring-equipped hub, the integrated ABS ring preserves wheel speed sensing without additional parts. Confirm sensor wiring and mounting orientation to ensure correct signal delivery to the vehicle’s ABS module.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes ABS reluctor ring for compatible models to maintain sensor input.\u003c\/li\u003e\n  \u003cli\u003eMatches OEM stud count and bolt pattern for proper rotor and caliper alignment.\u003c\/li\u003e\n  \u003cli\u003eCheck hub orientation and sensor clearance during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians, DIY mechanics and fleet owners replacing worn or noisy wheel hubs on compatible GM FWD\/AWD cars and crossovers who want a pre-assembled, OEM-pattern hub with ABS compatibility. Before purchasing, verify year, model, axle side and OEM part cross-reference to confirm exact fit for your vehicle.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the 513121 hub include an ABS tone ring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Autoround 513121 hub includes an integrated ABS reluctor ring for compatible ABS-equipped models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hub pre-assembled or does it require pressing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It arrives pre-assembled as a complete hub-and-bearing unit, eliminating the need to press in a separate bearing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55168549323095,"sku":"B07FLRX7V5","price":71.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-front-hub-assembly-front-view.jpg?v=1790407879"},{"product_id":"autoround-wheel-hub-assembly-for-buick-enclave-513277-front-rear-6-lug-w-abs-tone-ring-direct-fit","title":"Autoround Wheel Hub Assembly for Buick Enclave 513277 — Front\/Rear 6-Lug w\/ ABS Tone Ring, Direct-Fit","description":"\u003cp\u003e\u003cstrong\u003eAutoround 513277 is a direct-fit front and rear wheel hub assembly with integrated bearing and ABS tone ring engineered to replace factory hubs on select GM crossover models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement hub assembly is built to restore wheel alignment, wheel-to-axle connection, and ABS sensor reliability for 2008–2017 Buick Enclave models and several compatible GM siblings. It pairs a sealed bearing with a robust flange and tone ring so you can reinstall the wheel, reactivate the ABS signal path, and return the vehicle to safe, predictable handling without modifying factory components.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles does this Autoround hub fit?\u003c\/h3\u003e\n\u003cp\u003eThe 513277 hub assembly is designed as a direct replacement for specific Buick, Chevrolet, GMC and Saturn crossovers. It fits both front and rear positions where equipped with a 6-lug wheel layout and ABS tone ring.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuick Enclave: 2008–2017\u003c\/li\u003e\n  \u003cli\u003eChevrolet Traverse: 2009–2017\u003c\/li\u003e\n  \u003cli\u003eGMC Acadia: 2007–2016 and 2017 Acadia Limited\u003c\/li\u003e\n  \u003cli\u003eSaturn Outlook: 2007–2010\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key technical specs and replaced part numbers?\u003c\/h3\u003e\n\u003cp\u003eThis assembly includes a sealed bearing, a flange sized for OE wheels, and an ABS tone ring. Key dimensions and reference part numbers help confirm compatibility before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6 lugs and ABS-equipped tone ring for sensor compatibility\u003c\/li\u003e\n  \u003cli\u003eFlange diameter: 6.65 in; flange offset: 1.86 in; bolt circle diameter: 5.2 in\u003c\/li\u003e\n  \u003cli\u003eCross-references: 25784448, 25848366, BR930532, HA590227\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eAutoround hub assemblies are pre-assembled and sealed to simplify installation and reduce bench time. Expect a straightforward swap when replacing the hub in-loco using standard suspension tools and following factory torque specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled bearing and hub reduces shop labor\u003c\/li\u003e\n  \u003cli\u003eSealed design minimizes prep and contamination risk\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet OEM fitment for direct bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Autoround assure quality and customer support?\u003c\/h3\u003e\n\u003cp\u003eEach wheel hub is quality-tested to meet or exceed OEM performance criteria and includes a limited assurance period from the manufacturer. Autoround provides customer help channels for fitment questions and a multi-year quality assurance program.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuality tested to match OEM standards for durability and fit\u003c\/li\u003e\n  \u003cli\u003e3-year QA coverage offered by Autoround for added confidence\u003c\/li\u003e\n  \u003cli\u003eCustomer service available for fitment and replacement inquiries\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Autoround 513277 hub assembly is aimed at DIY mechanics, independent repair shops, and fleet maintainers working on mid-size GM crossovers that need a reliable, direct-fit wheel hub and bearing replacement. Choose this part if you want a sealed, ABS-equipped assembly that restores wheel engagement and sensor function without aftermarket modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the 513277 hub include an ABS tone ring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Autoround 513277 comes with an integrated ABS tone ring for sensor compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hub a direct fit for a 2012 Buick Enclave?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 513277 is compatible with Buick Enclave models from 2008 through 2017.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55169050149207,"sku":"B076F4W37N","price":88.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-513277-front-packaging.jpg?v=1790417612"},{"product_id":"autoround-front-wheel-hub-bearing-assembly-for-ford-f-150-2000-2003-2004-heritage-5-lug-m14-with-abs-pre-assembled","title":"Autoround Front Wheel Hub \u0026 Bearing Assembly for Ford F-150 2000-2003, 2004 Heritage — 5-Lug M14 with ABS, Pre-assembled","description":"\u003cp\u003e\u003cstrong\u003eAutoround 515029 is a direct-fit front wheel hub and bearing assembly engineered for 4WD Ford F-150 (2000–2003) and F-150 Heritage (2004) vehicles with 5-lug wheels and 4-wheel ABS.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis wheel hub and bearing assembly replaces worn or damaged front hubs on compatible Ford F-150 trucks, restoring wheel alignment accuracy and ABS sensor integrity. Built to match OEM mounting points and electrical connections, the Autoround 515029 unit is intended for 4x4 models that use M14 wheel bolts, a 5-stud configuration, and full-time four-wheel ABS systems. The part includes a pre-assembled hub and sealed bearing to simplify installation and reduce the need for extra presses or bearings.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hub assembly fit my F-150 and what exact models does it replace?\u003c\/h3\u003e\n\u003cp\u003eThe 515029 hub is manufactured to match the original equipment bolt pattern, flange size, and offset for selected Ford F-150 trucks. It fits 2000–2003 F-150 front hubs for 4WD models and the 2004 F-150 Heritage front hubs that share the same specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible vehicles: 2000–2003 Ford F-150 (4WD) and 2004 F-150 Heritage (4WD)\u003c\/li\u003e\n  \u003cli\u003eWheel bolts: M14 thread size\u003c\/li\u003e\n  \u003cli\u003eConfiguration: 5-stud hub with 4-wheel ABS sensor provision\u003c\/li\u003e\n  \u003cli\u003eDirect replacements include part numbers: 515029, WE61560, 715029, BR930423, 1L34-1104AA, WB15029\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key dimensions and mechanical features I need to know?\u003c\/h3\u003e\n\u003cp\u003eThis assembly specifies flange diameter, offset and bolt circle dimensions to ensure proper wheel mounting and brake rotor clearance. The sealed bearing and hub flange are engineered to meet common OEM tolerances so the wheel runs true and ABS signals remain consistent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlange diameter: 7.13 inches for correct rotor and caliper clearance\u003c\/li\u003e\n  \u003cli\u003eFlange offset: 1.95 inches to preserve factory wheel positioning\u003c\/li\u003e\n  \u003cli\u003eBolt circle diameter (BCD): 5.31 inches to match 5-lug wheels\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for 4WD models with ABS wiring\/sensor integration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what tools or steps are typically required?\u003c\/h3\u003e\n\u003cp\u003eAutoround ships the hub and bearing as an assembled unit which reduces labor compared with separate bearing replacement. Typical installation requires removing the wheel, brake caliper, rotor, and old hub, then bolting the new assembly in place and reconnecting the ABS sensor harness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSold as a pre-assembled hub and bearing to save pressing time\u003c\/li\u003e\n  \u003cli\u003eCommon shop tools required: torque wrench, socket set, jack and stands\u003c\/li\u003e\n  \u003cli\u003eExpect to reattach brake components and verify ABS wiring after installation\u003c\/li\u003e\n  \u003cli\u003eFollow factory torque specs and alignment check after replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality assurances and post-sale support does Autoround provide?\u003c\/h3\u003e\n\u003cp\u003eAutoround states the 515029 assemblies are quality-tested to meet or exceed OEM performance standards, and the product includes a customer service pathway for after-sales questions. The brand provides a limited service window to address fitment or functional concerns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTested to match or exceed OEM specifications for fit and function\u003c\/li\u003e\n  \u003cli\u003eThree-year after-sales service from Autoround for support inquiries\u003c\/li\u003e\n  \u003cli\u003eReplaces several OEM and aftermarket part numbers for easier cross-reference\u003c\/li\u003e\n  \u003cli\u003eSold alongside other replacement components from Autoround for full-vehicle repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and technicians working on late-model Ford F-150 trucks (2000–2003 F-150 and 2004 F-150 Heritage) equipped with 4WD and 4-wheel ABS who need a direct-fit front hub replacement. This unit is intended for those who want a pre-assembled hub and sealed bearing that aligns with factory mounting geometry, preserves ABS sensor function, and replaces the specified OEM part numbers. If you need a hub for a different wheel bolt pattern, 2WD model, or non-ABS setup, confirm compatibility before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hub work on 2WD F-150 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The Autoround 515029 is built for 4WD Ford F-150 and F-150 Heritage models with 4-wheel ABS and M14 wheel bolts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the ABS sensor included or pre-wired?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The assembly includes the ABS sensor provision and connector integrated on the hub for direct reconnection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55169079968087,"sku":"B089K5TNS7","price":93.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-front-hub-assembly-front-view_e3374f1d-08ea-4b08-a220-b9fc20f737b7.jpg?v=1790418032"},{"product_id":"autoround-wheel-hub-assembly-for-2004-2007-nissan-titan-armada-pathfinder-part-515066-integrated-abs-tone-ring","title":"Autoround Wheel Hub Assembly for 2004–2007 Nissan Titan Armada Pathfinder — Part 515066, Integrated ABS Tone Ring","description":"\u003cp\u003e\u003cstrong\u003eAutoround 515066 is a direct-fit wheel hub assembly engineered to replace your vehicle's worn hub and restore secure wheel mounting and ABS functionality.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis wheel hub assembly is manufactured to match OEM form, fit and function for select Nissan and Infiniti full-size SUVs and trucks. It combines an integrated bearing, ABS tone ring and a durable flange to simplify replacement and help return steering stability, wheel alignment consistency and ABS sensor reliability after installation.\u003c\/p\u003e\n\n\u003ch3\u003eWill this hub assembly fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThis part is designed specifically for 2004–2007 Infiniti QX56 and 2004–2007 Nissan Armada, Titan and certain Pathfinder models (including 2004 Pathfinder LE\/SE and 2004 Pathfinder Armada). Cross-references and part numbers are provided to confirm compatibility before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: 2004–2007 Infiniti QX56; 2004–2007 Nissan Armada; 2004–2007 Nissan Titan; 2004 Nissan Pathfinder LE\/SE and Pathfinder Armada.\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM references: 515066, WE61000, SP500701, BR930637 for quick verification.\u003c\/li\u003e\n  \u003cli\u003eConfirm fit by matching vehicle year, model and OE part number or consulting a mechanic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key technical specifications I should know?\u003c\/h3\u003e\n\u003cp\u003eThe assembly includes a six-lug flange designed to accept factory wheels and an internal ABS tone ring for sensor feedback. Physical dimensions and bolt patterns match OEM guidance to ensure correct wheel centering and torque distribution.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlange diameter: 6.75 inches; flange offset: 1.8 inches.\u003c\/li\u003e\n  \u003cli\u003eBolt circle diameter: 5.5 inches; lug pattern: 6 lugs.\u003c\/li\u003e\n  \u003cli\u003eIntegrated ABS system compatibility for vehicles equipped with ABS sensors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eAutoround provides a pre-assembled hub and bearing unit to reduce installation time versus pressing in a separate bearing. Installation typically requires basic specialty tools, proper torque sequences and adherence to vehicle-specific service procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled design eliminates pressing the bearing into the hub on most replacements.\u003c\/li\u003e\n  \u003cli\u003eExpect to reuse or replace wheel hub bolts and observe proper torque specifications.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation is advised if you lack press tools or wheel alignment capabilities.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Autoround support product quality and post-sale help?\u003c\/h3\u003e\n\u003cp\u003eAutoround wheel hub assemblies are quality tested to meet or exceed OEM-level performance benchmarks. The company stands behind their parts with a limited three-year QA period and customer support for fitment or warranty inquiries.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured and inspected to match OEM performance targets.\u003c\/li\u003e\n  \u003cli\u003eThree years quality assurance coverage for defects and early failures.\u003c\/li\u003e\n  \u003cli\u003eCustomer assistance available via \"Autoround Customer Service\" through Amazon for questions and claims.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Autoround 515066 wheel hub assembly is intended for owners and technicians working on 2004–2007 Infiniti QX56, Nissan Armada, Titan and compatible Pathfinder variants who need a reliable, direct-fit replacement with integrated bearing and ABS capability. Choose this assembly if you want a pre-assembled hub to reduce installation complexity, restore proper wheel mounting and maintain ABS sensor operation, while relying on a three-year QA backing for peace of mind.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hub include the wheel bearing and ABS ring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Autoround 515066 is a pre-assembled unit with integrated bearing and ABS tone ring for compatible vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What model years does this fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits 2004–2007 Infiniti QX56 and 2004–2007 Nissan Armada, Titan; also fits certain 2004 Pathfinder variants.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55169080000855,"sku":"B07ZN4XF5V","price":100.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-hub-front-view.jpg?v=1790418031"},{"product_id":"autoround-front-wheel-hub-assembly-for-ram-1500-2012-2018-5-lug-preassembled-with-abs-tone-ring","title":"Autoround Front Wheel Hub Assembly for Ram 1500 2012-2018, 5-Lug Preassembled with ABS Tone Ring","description":"\u003cp\u003e\u003cstrong\u003eThe Autoround 515151 front wheel hub assembly is a direct-fit, 5-lug replacement designed to restore front-wheel rotation and ABS signal reliability on compatible Ram 1500 trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your 2012–2018 Ram 1500 or 2019–2022 Ram 1500 Classic needs a front hub replacement, the Autoround 515151 offers a factory-style fit with integrated wheel bearings and ABS tone ring. This assembly replaces OE references such as BR930858, HA590515 and 68267298AA, and is engineered to meet or exceed original equipment performance standards for everyday driving and towing loads.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hub assembly fit my Ram 1500?\u003c\/h3\u003e\n\u003cp\u003eThe 515151 hub is built to match factory mounting points, bolt pattern and ABS wiring location for compatible model years. It is designed to install in the front axle position and accept the vehicle's original brake and wheel components without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2012–2018 Ram 1500 and 2019–2022 Ram 1500 Classic\u003c\/li\u003e\n  \u003cli\u003e5-lug bolt pattern to match OEM wheels\u003c\/li\u003e\n  \u003cli\u003ePreassembled bearing and hub for straightforward swap-in installation\u003c\/li\u003e\n  \u003cli\u003eReplaces part numbers BR930858, HA590515, 68267298AA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features affect performance and safety?\u003c\/h3\u003e\n\u003cp\u003eThis wheel hub assembly includes an integrated wheel bearing and ABS tone ring so speed-sensor readings remain accurate. Components are manufactured to resist wear under normal road conditions and to maintain wheel alignment and rotational stability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated ABS system compatibility preserves traction and braking system inputs\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined mating surfaces for consistent fit and runout control\u003c\/li\u003e\n  \u003cli\u003eSealed bearing design helps keep contaminants out and lubricants in\u003c\/li\u003e\n  \u003cli\u003eDurable materials chosen for load-bearing front axle use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eThe assembly ships prebuilt so technicians or experienced DIYers can replace the hub without pressing bearings or repacking grease. Typical installation requires standard removal of the wheel, brake caliper and rotor, followed by hub mounting and torqueing to factory specs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePreassembled hub and bearing reduce labor time compared with separate components\u003c\/li\u003e\n  \u003cli\u003eCompatible with factory brake components for a plug-and-play job\u003c\/li\u003e\n  \u003cli\u003eFollow factory torque settings and wheel bearing break-in procedures\u003c\/li\u003e\n  \u003cli\u003eInspect axle and surrounding seals while replacing the hub\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kind of warranty and support does Autoround provide?\u003c\/h3\u003e\n\u003cp\u003eAutoround backs this hub assembly with a three-year quality assurance period and customer support channels for help with fitment or replacement questions. Their attention to testing seeks to ensure each unit meets or surpasses OEM-style performance checks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree years of QA support from Autoround\u003c\/li\u003e\n  \u003cli\u003eCustomer service available via Amazon messaging for questions\u003c\/li\u003e\n  \u003cli\u003eManufacturer testing aimed at OEM-equivalent durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Autoround 515151 front wheel hub assembly is aimed at Ram 1500 owners, fleet managers and independent mechanics who need a reliable, direct-fit replacement for front-axle wheel bearings with ABS compatibility. It's a practical choice when the original hub shows play, noise, worn bearing performance, or when the ABS tone ring is damaged and you want a full, preassembled swap that restores proper wheel rotation signals and handling stability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Autoround 515151 hub compatible with my 2016 Ram 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 515151 hub fits 2012–2018 Ram 1500 models, including 2016, with a 5-lug front axle and ABS.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this assembly include the wheel bearing and ABS tone ring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The unit ships preassembled with the wheel bearing and integrated ABS tone ring.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55169084490071,"sku":"B089K7P4VZ","price":110.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-515151-front-hub-assembly-front-view.jpg?v=1790418207"},{"product_id":"autoround-rear-wheel-hub-assembly-512553-direct-fit-5-lug-with-abs-for-hyundai-sonata-2015-2019","title":"Autoround Rear Wheel Hub Assembly 512553 — Direct-Fit 5-Lug with ABS for Hyundai Sonata 2015–2019","description":"\u003cp\u003e\u003cstrong\u003eThe Autoround 512553 rear wheel hub assembly is a direct-fit replacement hub with integrated bearing and ABS provision designed to restore rear-wheel alignment and smooth rotation for compatible Hyundai and Kia models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis hub assembly combines a pre-assembled bearing and mounting flange so you can replace a worn rear hub without pressing in a separate bearing. Built for vehicles with a five-lug pattern and ABS wiring, the unit matches critical OEM dimensions so it mounts cleanly and keeps wheel runout and sensor signals within expected tolerances.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this Autoround hub assembly fit?\u003c\/h3\u003e\n\u003cp\u003eThe 512553 is engineered to match the rear hubs on a range of Hyundai and Kia models. Confirm fitment by cross-referencing your original part number or the vehicle application list before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHyundai Sonata: 2015–2019 (rear; all trims)\u003c\/li\u003e\n  \u003cli\u003eHyundai Tucson: 2016–2021 (rear; front-wheel-drive models)\u003c\/li\u003e\n  \u003cli\u003eHyundai Veloster N: 2020–2022 (rear; all trims)\u003c\/li\u003e\n  \u003cli\u003eKia Cadenza: 2017–2020 (rear; all trims)\u003c\/li\u003e\n  \u003cli\u003eKia Optima: 2016–2020 (rear; all trims)\u003c\/li\u003e\n  \u003cli\u003eKia Sportage: 2017–2021 (rear; front-wheel-drive models)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications and how do they compare to OEM?\u003c\/h3\u003e\n\u003cp\u003eThis assembly includes the hub, integrated bearing and ABS provision, sized to match factory geometry. It is specified to replace common OEM numbers and maintain ride and brake-sensor performance when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWheel stud count: 5 lug configuration for direct bolt-on replacement\u003c\/li\u003e\n  \u003cli\u003eFlange diameter: 143 mm; hub pilot diameter: 80.9 mm\u003c\/li\u003e\n  \u003cli\u003eBolt circle diameter (PCD): 114.7 mm\u003c\/li\u003e\n  \u003cli\u003eReplaces part numbers: 512553, BR930925, HA590614\u003c\/li\u003e\n  \u003cli\u003eIncludes ABS sensor provision to preserve anti-lock braking input\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I expect during replacement?\u003c\/h3\u003e\n\u003cp\u003eThe unit ships pre-assembled to simplify installation compared with separate bearing-and-hub jobs. Basic mechanical skills and common shop tools are usually sufficient for a competent DIYer; a press is not required for the bearing itself because it is factory-installed into the hub.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled hub and bearing reduces install steps and alignment work\u003c\/li\u003e\n  \u003cli\u003eFits existing brake and suspension hardware when matched to application\u003c\/li\u003e\n  \u003cli\u003eTorque wheel studs and axle components to manufacturer specifications\u003c\/li\u003e\n  \u003cli\u003eVerify ABS sensor connection and clear any diagnostic codes after fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality assurances and support does Autoround provide?\u003c\/h3\u003e\n\u003cp\u003eAutoround tests its wheel bearing and hub assemblies to meet performance expectations similar to original equipment. The brand backs this product with a multi-year quality assurance period and direct customer service to address fitment or performance questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured and tested to match OEM performance benchmarks\u003c\/li\u003e\n  \u003cli\u003eThree-year quality assurance coverage from Autoround\u003c\/li\u003e\n  \u003cli\u003eCustomer support available via Autoround channels for troubleshooting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Autoround 512553 rear wheel hub assembly is aimed at owners and technicians replacing a worn or noisy rear hub on supported Hyundai and Kia vehicles who want a pre-assembled, OEM-dimension replacement with ABS compatibility. Choose this hub if you need a direct-fit, tested component that reduces installation complexity and restores the vehicle's rear-wheel mounting geometry.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hub include the wheel bearing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Autoround 512553 is a pre-assembled hub with the bearing already installed, ready for bolt-on replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty or support does Autoround provide?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Autoround offers a three-year quality assurance period and customer service for fitment or product questions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55169093304663,"sku":"B0CK21XLXL","price":95.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-512553-front-packaging.jpg?v=1790418451"},{"product_id":"autoround-front-wheel-hub-assembly-for-2008-2016-dodge-grand-caravan-5-lug-integrated-abs-513273","title":"Autoround front wheel hub assembly for 2008–2016 Dodge Grand Caravan — 5-lug, integrated ABS (513273)","description":"\u003cstrong\u003eAutoround 513273 is a direct-fit front wheel hub assembly designed to replace the original hub on 2008–2016 Dodge Grand Caravan models, restoring wheel support and ABS functionality.\u003c\/strong\u003e\n\n\u003cp\u003eWhen a wheel hub begins to wear, symptoms such as noise, vibration, or ABS warnings can appear. The Autoround 513273 hub assembly is manufactured to match OEM specifications for fit and function across multiple compatible makes and models, providing a straightforward replacement without the need to press out bearings. Built with a 5-lug pattern and integrated ABS tone ring, this assembly targets mechanics and DIYers who need a reliable, ready-to-install hub that meets standard performance expectations.\u003c\/p\u003e\n\n\u003ch3\u003eWill this hub assembly fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThis unit is engineered to be compatible with specific Chrysler, Dodge, Volkswagen, and Ram C\/V front applications produced in the listed years. Confirm fitment by matching the part number and vehicle year, make, and model before purchase to ensure proper fitment and bolt pattern alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit for 2008–2016 Chrysler Town \u0026amp; Country (front)\u003c\/li\u003e\n  \u003cli\u003eDirect fit for 2008–2016 Dodge Grand Caravan (front)\u003c\/li\u003e\n  \u003cli\u003eDirect fit for 2009–2014 Volkswagen Routan (front)\u003c\/li\u003e\n  \u003cli\u003eDirect fit for 2012–2015 Ram C\/V (front)\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM references: 4721, 985AE, 4721578AE, HA590243, BR930688\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this hub assembly affect braking and ABS performance?\u003c\/h3\u003e\n\u003cp\u003eThe Autoround 513273 includes an integrated ABS tone ring, so wheel speed sensors can continue to monitor rotation accurately. Replacing a worn hub with a unit that preserves ABS signaling helps maintain braking system stability and prevents erroneous ABS warnings when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in ABS ring for sensor compatibility\u003c\/li\u003e\n  \u003cli\u003eMaintains wheel speed signal integrity when installed\u003c\/li\u003e\n  \u003cli\u003eHelps avoid false ABS fault codes caused by damaged hubs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the mechanical specs and notable features?\u003c\/h3\u003e\n\u003cp\u003eThe assembly uses a five-lug mounting pattern and a precise flange geometry that aligns with specified OEM measurements. It’s tested to meet or exceed OEM performance standards and comes with a flange diameter and offset suited to the listed vehicle applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5-lug configuration for correct wheel mounting\u003c\/li\u003e\n  \u003cli\u003eFlange diameter: 6.36 inches; flange offset: 1.91 inches\u003c\/li\u003e\n  \u003cli\u003eBolt circle diameter: 5.00 inches\u003c\/li\u003e\n  \u003cli\u003ePre-assembled bearing for quicker installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is the installation and what support is available?\u003c\/h3\u003e\n\u003cp\u003eThe Autoround hub assembly arrives pre-assembled to reduce installation steps; for most experienced technicians the swap is a direct replacement using standard tools. Autoround backs the product with a three-year QA period and customer support through their service channels for fitment or function questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled hub and bearing to simplify replacement\u003c\/li\u003e\n  \u003cli\u003eDesigned for bolt-on installation—no pressing required if matching OEM setup\u003c\/li\u003e\n  \u003cli\u003e3-year quality assurance and customer service available\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: the Autoround 513273 hub assembly is intended for vehicle owners, fleet managers, and independent mechanics who need a cost-effective, OEM-compatible front hub replacement for compatible Dodge Grand Caravan, Chrysler Town \u0026amp; Country, Volkswagen Routan, or Ram C\/V models. Choose this unit when you want a pre-assembled, ABS-compatible hub that matches OEM geometry and reduces installation time while restoring safe wheel support and sensor performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hub include an ABS tone ring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Autoround 513273 includes an integrated ABS tone ring for compatible wheel speed sensors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this a direct replacement or does it need machining?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is a pre-assembled direct-fit replacement for the listed models and typically requires no bearing press work when matched to OEM configuration.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55169122402647,"sku":"B076DZPWHZ","price":87.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-front-hub-assembly-front-view_jpg.jpg?v=1790418944"},{"product_id":"autoround-front-wheel-hub-assembly-for-2007-2014-chevy-tahoe-4wd-pre-assembled-with-abs-tone-ring","title":"Autoround Front Wheel Hub Assembly for 2007–2014 Chevy Tahoe 4WD — Pre‑assembled with ABS Tone Ring","description":"\u003cp\u003e\u003cstrong\u003eAutoround 515096 is a direct-fit front wheel hub assembly engineered to replace the original hub on 2007–2014 Chevy Tahoe 4WD\/AWD models and compatible GM trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis hub assembly is built for drivers and mechanics who need a reliable, factory-style replacement for worn or damaged front hubs on Chevrolet, GMC and Cadillac vehicles from the late 2000s to early 2010s. It includes an integrated wheel bearing, ABS tone ring compatibility, and mounting geometry that matches OEM specifications so installation is straightforward and torque procedures follow factory guidance.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this Autoround hub fit?\u003c\/h3\u003e\n\u003cp\u003eThe 515096 hub is designed for front-axle fitment on many GM full-size trucks and SUVs. It fits 4WD and AWD front applications and certain RWD police-spec vehicles listed by model year. Confirm fitment by matching year, model, and drive type before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet: Tahoe 2007–2014 (4WD), Tahoe 2014 Police Package (RWD), Suburban, Avalanche, Silverado 1500 (selected years 4WD)\u003c\/li\u003e\n  \u003cli\u003eGMC: Sierra 1500, Yukon, Yukon XL 1500 (2007–2014 variations with 4WD\/AWD)\u003c\/li\u003e\n  \u003cli\u003eCadillac: Escalade, Escalade ESV, Escalade EXT (front AWD models within listed years)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications and replacement part numbers?\u003c\/h3\u003e\n\u003cp\u003eThis hub offers the flange and bolt pattern needed to mirror OEM mounting and wheel alignment. It supports ABS-equipped wheel systems and a six-lug wheel pattern for proper wheel attachment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlange diameter: 7.04 in; flange offset: 1.94 in\u003c\/li\u003e\n  \u003cli\u003eBolt circle diameter: 5.5 in; 6-lug configuration\u003c\/li\u003e\n  \u003cli\u003eDesigned for 4WD\/AWD front applications and ABS systems\u003c\/li\u003e\n  \u003cli\u003eDirect replacements include GM part references such as 25976819, BR930661, SP500301\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eThe hub assembly comes pre-assembled with bearing and tone ring, which reduces steps during installation. Basic shop tools and a torque wrench are required; follow vehicle service manual torque specs and wheel alignment check after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled hub and bearing save time compared with separate components\u003c\/li\u003e\n  \u003cli\u003eRequires hub nut torqueing, rotor\/wheel re-installation, and ABS wiring inspection\u003c\/li\u003e\n  \u003cli\u003eRecommended: verify axle seal condition and replace hub nut if damaged\u003c\/li\u003e\n  \u003cli\u003eAfter installation: road test and inspect for noise or ABS error codes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality assurances and customer support does Autoround provide?\u003c\/h3\u003e\n\u003cp\u003eAutoround tests its wheel bearing and hub assemblies to meet or exceed OEM performance characteristics. The product comes with a limited 3-year QA period and access to customer service for fitment or installation questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured and tested to match OEM fitment and durability expectations\u003c\/li\u003e\n  \u003cli\u003e3-year quality assurance\/support from Autoround\u003c\/li\u003e\n  \u003cli\u003eCustomer service available via the seller platform for questions or returns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This hub assembly is intended for owners, DIY mechanics, and professional technicians replacing a failed or worn front hub on compatible GM trucks and SUVs—especially those who want a cost-effective, direct-fit option that includes the bearing and ABS tone ring in one unit. If you need a like-for-like replacement for 4WD\/AWD front applications on Chevy Tahoe, Suburban, Silverado, GMC Sierra, Yukon or Cadillac Escalade models from 2007–2014, the Autoround 515096 is built to match the original mounting and performance characteristics while simplifying installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hub assembly include the wheel bearing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Autoround 515096 comes pre-assembled with the wheel bearing and ABS tone ring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit a 2010 Chevy Tahoe 4WD?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it fits 2010 Tahoe front 4WD models, but confirm your vehicle’s axle and ABS configuration.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55169147502935,"sku":"B06XD96G83","price":113.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-front-wheel-hub-assembly-front-view.jpg?v=1790419487"},{"product_id":"autoround-wheel-hub-bearing-assembly-513420-for-hyundai-kia-5-lug-w-abs-front-or-rear-direct-replacement-pre-assembled","title":"Autoround Wheel Hub \u0026 Bearing Assembly 513420 for Hyundai \u0026 Kia 5-Lug w\/ABS — Front or Rear Direct Replacement, Pre-assembled","description":"\u003cp\u003e\u003cstrong\u003eAutoround 513420 is a direct-replacement wheel hub and bearing assembly with ABS signal designed to restore factory fit and rotation for compatible Hyundai and Kia models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis hub assembly combines a pre-assembled bearing, hub flange and ABS tone ring into one unit engineered to meet or exceed OEM tolerances. It is sold as a 5-lug unit and fits specific front or rear positions on a range of 2017–2023 Hyundai and Kia vehicles. Because the bearing and hub arrive pre-pressurized and mounted, the part reduces install time and avoids the need for a separate pressed-in bearing.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and positions does this assembly fit?\u003c\/h3\u003e\n\u003cp\u003eThe Autoround 513420 is specified to fit either front or rear applications depending on the model year and drivetrain. It lists compatibility with Hyundai Elantra, Elantra GT, Ioniq, Veloster families and Kona, plus Kia Forte, Niro and Seltos for the model years shown. Confirm fit by matching your OEM part number (513420, 51750-F2000, 51750F2000) and verifying wheel stud count and bolt circle diameter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFront fit: Hyundai Elantra 2017–2023, Elantra GT 2017–2020, Ioniq 2017–2022, Veloster 2019–2021, Veloster N 2019; Kia Forte 2019–2022, Niro 2017–2022.\u003c\/li\u003e\n  \u003cli\u003eRear fit: Hyundai Kona 2018–2023 (AWD), Kia Seltos 2021–2022 (AWD).\u003c\/li\u003e\n  \u003cli\u003eHardware specs: 5 lugs, flange diameter 137.99 mm, bolt circle 114.3 mm; includes ABS tone ring.\u003c\/li\u003e\n  \u003cli\u003eOEM cross-references: 513420, 51750-F2000, 51750F2000.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this hub assembly affect safety and drivability?\u003c\/h3\u003e\n\u003cp\u003eA properly functioning hub and bearing assembly maintains wheel alignment, reduces vibration and provides accurate ABS wheel-speed signals. Replacing a worn assembly helps restore steering stability and braking performance as intended by the vehicle design. This unit is quality-tested to align with original equipment standards.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in ABS tone ring preserves wheel-speed sensor accuracy for traction and braking systems.\u003c\/li\u003e\n  \u003cli\u003ePre-assembled bearing reduces misalignment risk compared with separate components.\u003c\/li\u003e\n  \u003cli\u003eQuality testing aims to match OEM durability and rotational precision.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the installation and maintenance considerations?\u003c\/h3\u003e\n\u003cp\u003eThe Autoround hub arrives assembled for straightforward installation, often saving labor versus pressing in a new bearing. Basic installation requires standard wheel hub removal tools and correct torque on axle nuts and mounting bolts. After installation, verify wheel endplay and retorque fasteners per the vehicle manufacturer’s procedure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for direct bolt-on replacement — no bearing press needed in most installs.\u003c\/li\u003e\n  \u003cli\u003eFollow factory torque specs and inspect axle and mounting surfaces before assembly.\u003c\/li\u003e\n  \u003cli\u003ePost-installation checks: road test for noise\/vibration and confirm ABS sensor codes are cleared.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact specifications and replacement cross-references?\u003c\/h3\u003e\n\u003cp\u003eThis part is a 5-lug hub assembly with a flange diameter of 137.99 mm and a bolt circle diameter of 114.3 mm. It replaces OE numbers 513420 and 51750-F2000 (also shown as 51750F2000). The assembly is suitable for both front and rear fitments listed by vehicle model and year.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlange diameter: 137.99 mm; Bolt circle diameter: 114.3 mm.\u003c\/li\u003e\n  \u003cli\u003eLug count: 5; Integrated ABS tone ring included.\u003c\/li\u003e\n  \u003cli\u003eOE cross-reference: 513420 \/ 51750-F2000 \/ 51750F2000.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Autoround 513420 assembly is aimed at DIY mechanics, independent repair shops and fleet owners who need a reliable, direct-replacement hub for supported Hyundai and Kia models. Choose this unit if you require a pre-assembled hub with ABS compatibility, OEM-equivalent fitment and specifications for the vehicles and years listed. Always confirm fit by comparing part numbers, lug pattern, and bolt circle before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hub include the ABS tone ring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Autoround 513420 assembly includes an integrated ABS tone ring for wheel-speed sensing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this part fit my 2020 Kia Forte?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Kia Forte 2019–2022 front applications; verify by matching your OEM part number and wheel lug pattern.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55169163723095,"sku":"B0CQJP5C3F","price":90.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-front-packaging-hub-assembly.jpg?v=1790419853"},{"product_id":"autoround-front-wheel-hub-assembly-for-jeep-wrangler-2011-2017-4wd-integrated-bearing-abs-tone-ring","title":"Autoround Front Wheel Hub Assembly for Jeep Wrangler 2011–2017 — 4WD, Integrated Bearing \u0026 ABS Tone Ring","description":"\u003cstrong\u003eAutoround 513369 is a complete front 4WD wheel hub assembly engineered to replace the OEM hub on Jeep Wrangler models from 2011–2017, restoring wheel mounting, ABS sensor integration, and smooth bearing operation.\u003c\/strong\u003e\n\n\u003cp\u003eThis direct-replacement wheel hub assembly is built for front-wheel 4WD applications on Jeep Wrangler JK models (2011–2017). It includes an integrated bearing and ABS tone ring, a 5-lug flange, and dimensions that match OEM fitment to simplify installation and maintain drivetrain alignment. The unit replaces factory part numbers HA590482 and 513369 and is designed, tested, and backed by Autoround's quality assurance program.\u003c\/p\u003e\n\n\u003ch3\u003eWill this hub fit my Jeep Wrangler?\u003c\/h3\u003e\n\u003cp\u003eYes — the Autoround 513369 hub is manufactured to fit front 4WD Jeep Wrangler models from 2011 through 2017. It matches common OEM mounting dimensions so it mounts directly to the spindle and mates with factory brake and wheel components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Jeep Wrangler (JK) 2011–2017, front 4WD\u003c\/li\u003e\n  \u003cli\u003eReplaces part numbers HA590482 and 513369\u003c\/li\u003e\n  \u003cli\u003eBolt circle diameter: 5.00 in for direct wheel fitment\u003c\/li\u003e\n  \u003cli\u003eHub pilot diameter: 3.94 in to align with factory hubs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications I should know?\u003c\/h3\u003e\n\u003cp\u003eThe hub assembly includes a pre-pressed wheel bearing and an ABS tone ring for reliable wheel-speed sensing. The flange accepts 5-lug wheels and the overall dimensions were chosen to match OEM geometry and maintain vehicle handling characteristics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlange type: 5-lug configuration for standard Wrangler wheels\u003c\/li\u003e\n  \u003cli\u003eFlange diameter: 6.36 in for proper wheel seating\u003c\/li\u003e\n  \u003cli\u003eIncludes ABS-compatible tone ring for factory anti-lock systems\u003c\/li\u003e\n  \u003cli\u003eQuality-tested to meet or exceed OEM performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with front-hub removal and spindle reassembly; the unit arrives pre-assembled to reduce press-fit work. Typical steps include removing the old hub, cleaning the spindle and mounting surface, and torqueing the hub to factory specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled bearing and hub reduce shop press needs\u003c\/li\u003e\n  \u003cli\u003eSame bolt pattern and pilot diameter as OEM for faster alignment\u003c\/li\u003e\n  \u003cli\u003eUse factory torque specs and service procedures for safe installation\u003c\/li\u003e\n  \u003cli\u003eIf unsure, have a professional mechanic perform the replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Autoround 513369 hub assembly is aimed at Jeep Wrangler owners, DIY mechanics, and professional shops that need a reliable, direct-fit front 4WD hub replacement for 2011–2017 Wranglers. It’s suited for vehicles requiring an OEM-style hub with ABS compatibility, a 5-lug flange, and verified dimensional match. Autoround supports the product with a 3-year QA policy and customer service for fitment questions or post-purchase assistance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hub include the wheel bearing and ABS ring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Autoround 513369 comes pre-assembled with the wheel bearing and ABS tone ring for front 4WD fitment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What Jeep years does this hub fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This hub is compatible with Jeep Wrangler (JK) front 4WD models from 2011 through 2017.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55169286209879,"sku":"B0CKXCN8GZ","price":93.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-front-wheel-hub-assembly-front-view_da4df38d-64e8-45e6-b01a-c1b1d92aa1bb.jpg?v=1790421749"},{"product_id":"autoround-brake-caliper-18b4728-18b4729-direct-fit-for-1999-2013-chevy-gmc-trucks-suvs-oem-style","title":"Autoround Brake Caliper 18B4728\/18B4729 — Direct-Fit for 1999-2013 Chevy\/GMC Trucks \u0026 SUVs, OEM-Style","description":"\u003cp\u003e\u003cstrong\u003eThe Autoround 18B4728 \/ 18B4729 is a direct-fit replacement brake caliper engineered to match OE dimensions and restore reliable stopping performance on a wide range of GM trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt to OEM-style specifications and factory-tested for durability, this caliper is offered as a direct replacement for numerous Chevrolet, GMC, Cadillac and Hummer models from 1999 through 2013. It arrives ready to install with the same mounting geometry, piston arrangement and brake-fit tolerances to reduce installation time and avoid modification. Autoround backs the part with a three-year QA period and customer support for fitment questions.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will accept this Autoround caliper?\u003c\/h3\u003e\n\u003cp\u003eThis caliper covers many front- and rear-axle applications across GM platforms. Fitment includes multiple model years of Silverado, Sierra, Suburban, Tahoe, Avalanche, Express vans, Yukon series, Escalade, H2 and others—check the exact position (front or rear) and model year before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Silverado\/Sierra 1500\/2500\/3500 models (specific years and axle positions vary)\u003c\/li\u003e\n  \u003cli\u003eFits Suburban, Tahoe, Yukon and Yukon XL entries across 2000–2013 model years\u003c\/li\u003e\n  \u003cli\u003eAlso matches select Cadillac Escalade and Hummer H2 applications\u003c\/li\u003e\n  \u003cli\u003eReplace part numbers include 184728, 184729 and OE cross-references for easy lookup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this caliper compare to the original equipment part?\u003c\/h3\u003e\n\u003cp\u003eManufactured to meet OE tolerances, the Autoround caliper mirrors the original in size, piston configuration and mounting points. It undergoes factory testing for pressure hold and mechanical integrity to help achieve consistent braking feel without reengineering brackets or hoses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-targeted dimensions and piston layout for bolt-on replacement\u003c\/li\u003e\n  \u003cli\u003eQuality control testing performed at the factory level\u003c\/li\u003e\n  \u003cli\u003eSurface finishes and seal systems chosen to resist corrosion and leaks\u003c\/li\u003e\n  \u003cli\u003eShipping as a complete caliper reduces bench-assembly time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know before installing the Autoround caliper?\u003c\/h3\u003e\n\u003cp\u003eVerify left\/right and front\/rear orientation and confirm the vehicle VIN\/year to ensure the correct application. Prepare by flushing brake fluid, inspecting hoses and hardware, and using new pads and hardware where recommended for best results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm axle position and piston count to match the vehicle’s system\u003c\/li\u003e\n  \u003cli\u003eBleed the brake system after installation to remove air\u003c\/li\u003e\n  \u003cli\u003eInspect mounting bolts, brake hose condition, and rotor surface beforehand\u003c\/li\u003e\n  \u003cli\u003eUse compatible pads and torque specifications during reassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with this product?\u003c\/h3\u003e\n\u003cp\u003eAutoround provides a three-year quality assurance window and direct customer service to address fitment or performance questions. Replacement or support options are available through Autoround customer channels if manufacturing defects arise within the coverage period.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree years of QA coverage from Autoround\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment and technical questions\u003c\/li\u003e\n  \u003cli\u003eClear OE cross-reference numbers included for verification\u003c\/li\u003e\n  \u003cli\u003ePart numbers listed for easier parts lookup prior to purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This caliper is intended for do-it-yourself mechanics, independent repair shops and fleet managers who need a dependable, direct-fit brake caliper replacement for GM trucks and SUVs. It suits anyone restoring original braking performance without custom modifications, provided the buyer confirms exact vehicle fitment and installs the part following standard brake service procedures.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this caliper fit both front and rear on my Silverado?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fitment depends on year and specific model; some Silverado years require the caliper on the front, others on the rear. Check the exact model year and axle position before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is bleeding the brakes required after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. After installing the new caliper you must bleed the brake system to remove air and restore firm pedal feel.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55170528510295,"sku":"B0BR574Q43","price":215.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-caliper-front-view.jpg?v=1790430264"},{"product_id":"autoround-rear-wheel-hub-assembly-for-subaru-outback-2015-2021-pre-assembled-bearing-abs-tone-ring","title":"Autoround Rear Wheel Hub Assembly for Subaru Outback 2015–2021 — Pre-assembled Bearing \u0026 ABS Tone Ring","description":"\u003cp\u003e\u003cstrong\u003eAutoround 512536 is a direct-replacement rear wheel hub assembly engineered to restore rear-wheel rotation, ABS sensor function, and wheel mounting for compatible Subaru models from 2015–2021.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis hub assembly is built as a one-piece, pre-assembled bearing and hub unit that replaces worn or noisy rear hubs on a range of Subaru models. It includes the wheel mounting face, integrated bearing, and ABS tone ring so you can swap the complete unit without pressing bearings separately. Autoround tests these assemblies to meet or exceed original equipment fit and performance standards, and the listing includes cross-reference part numbers to help confirm fitment.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Subaru models and years will this hub fit?\u003c\/h3\u003e\n\u003cp\u003eThe Autoround 512536 hub is designed for many late-model Subarus. It fits several Outback, Legacy, Forester, Ascent, WRX and WRX STI configurations within the stated model years, but always verify against your VIN or OEM part number before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Outback and Legacy (2015–2021), Ascent (2019–2021), Forester (2019), WRX\/WRX STI variants (2015–2019 depending on trim), and some 2017–2018 WRX trims.\u003c\/li\u003e\n  \u003cli\u003eReplaceable OEM cross-reference numbers included for easier confirmation.\u003c\/li\u003e\n  \u003cli\u003eRear axle location and 5-lug mounting pattern match specified Subaru rear hubs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this assembly handle ABS and wheel speed sensing?\u003c\/h3\u003e\n\u003cp\u003eThe unit arrives with an integrated ABS tone ring so the vehicle’s wheel-speed sensor retains correct input after installation. That means the anti-lock brake and traction control systems can continue to function as designed once the assembly is installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in ABS reluctor ring for consistent sensor readings.\u003c\/li\u003e\n  \u003cli\u003ePrecision-mounted tone ring to maintain factory sensor spacing.\u003c\/li\u003e\n  \u003cli\u003eDesigned to minimize electrical or signal variances compared with OEM hubs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the practical benefits and quality expectations?\u003c\/h3\u003e\n\u003cp\u003eAutoround units are manufactured and inspected to meet stringent dimensional and bearing performance standards, offering a cost-effective alternative to dealer parts while maintaining fit, form, and function. The hub is pre-assembled to simplify replacement and reduce labor compared with separate bearing-and-hub jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled bearing and hub save installation time and tooling.\u003c\/li\u003e\n  \u003cli\u003eQuality-tested to align with OEM tolerances for durability and noise control.\u003c\/li\u003e\n  \u003cli\u003eIncludes standard five-lug wheel flange suitable for OEM wheels and aftermarket options.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what support is available?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires standard suspension and brake service tools; hubs are intended to be a direct swap but may require a torque wrench and basic press or hub removal tools depending on vehicle condition. Autoround provides a limited QA period and customer service contact for fitment or quality questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for direct replacement—no bearing press during reassembly in most cases.\u003c\/li\u003e\n  \u003cli\u003eFollow factory torque specs for axle nut and wheel studs to ensure safety.\u003c\/li\u003e\n  \u003cli\u003eAutoround offers three years of quality assurance and customer support for issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a compatible Subaru and are hearing rear hub growl, feeling wheel play, or experiencing ABS or traction control warnings tied to a wheel-speed sensor fault, this assembly is intended as a straightforward, vehicle-specific replacement. It’s suitable for DIY mechanics with suspension experience, independent shops seeking a reliable aftermarket hub, or owners who prefer a pre-assembled unit to reduce labor time. Always verify fitment against your VIN, factory part number, or an experienced technician before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hub include the ABS tone ring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Autoround 512536 arrives with an integrated ABS tone ring for proper wheel-speed sensor operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this a direct replacement for Subaru Outback 2017?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your Outback is within the 2015–2021 range and matches the listed cross-reference numbers, this hub fits as a rear direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55170569142615,"sku":"B0CL5T9S3H","price":165.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-512536-front-face-hub.jpg?v=1790430979"},{"product_id":"autoround-front-wheel-hub-assembly-for-2007-2012-nissan-altima-2-5l-29-spline-abs-pre-assembled-bearing","title":"Autoround Front Wheel Hub Assembly for 2007-2012 Nissan Altima 2.5L — 29-Spline ABS, Pre-Assembled Bearing","description":"\u003cp\u003e\u003cstrong\u003eAutoround 513294 is a direct-fit front wheel hub assembly designed to replace the OEM hub on 2007–2012 Nissan Altima 2.5L (29-spline, ABS models) for reliable wheel support and ABS sensor compatibility.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis wheel hub assembly is engineered as a like-for-like replacement for the factory part number 513294 (also referenced as BR930655 or 40202-JA000). It’s built to meet or exceed OEM tolerances so it mounts cleanly to the steering knuckle, integrates with the vehicle’s ABS system, and aligns to the factory flange, bolt circle, and lug pattern. The assembly includes the bearing and hub pre-assembled to speed installation and reduce alignment issues that can arise from reusing worn components.\u003c\/p\u003e\n\n\u003ch3\u003eWill this hub fit my Altima and how do I verify compatibility?\u003c\/h3\u003e\n\u003cp\u003eThis Autoround 513294 hub is made specifically for 2007 Nissan Altima 2.5L L4 (ABS models with 29 splines) and 2008–2012 Nissan Altima 2.5L L4 with 29 splines. Confirm fit by matching your existing part’s spline count, lug pattern, and the vehicle model year.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for Nissan part numbers 513294, BR930655, 40202-JA000\u003c\/li\u003e\n  \u003cli\u003eFits front left or right on specified 2.5L Altima models\u003c\/li\u003e\n  \u003cli\u003eRequires 29-spline axle shaft and ABS-equipped vehicles\u003c\/li\u003e\n  \u003cli\u003eCompare flange diameter (5.35 in) and bolt circle (4.5 in) to your old hub\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the important specifications I need to know before buying?\u003c\/h3\u003e\n\u003cp\u003eKey dimensions and features determine whether the hub will bolt up and work with your brake and wheel assembly. This Autoround unit lists flange offset, flange diameter, lug count, and ABS compatibility so you can match it to the wheel and brake hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlange offset: 1.6 inches for proper wheel positioning\u003c\/li\u003e\n  \u003cli\u003eFlange diameter: 5.35 inches to align with brake rotor and dust shield\u003c\/li\u003e\n  \u003cli\u003eBolt circle diameter: 4.5 inches and 5 lug pattern\u003c\/li\u003e\n  \u003cli\u003e29-spline inner bore for correct axle engagement; ABS sensor compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools or steps are typical?\u003c\/h3\u003e\n\u003cp\u003eThe Autoround hub comes pre-assembled (bearing and hub), which reduces labor versus pressing in a separate bearing. Installation requires standard shop tools, proper torqueing, and basic suspension disassembly; an experienced DIYer can complete it, but some installations benefit from lift access or a press for the old hub removal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires wheel removal, brake caliper and rotor removal, and knuckle access\u003c\/li\u003e\n  \u003cli\u003eTorque axle nut and hub-to-knuckle bolts to manufacturer specs\u003c\/li\u003e\n  \u003cli\u003eABS tone ring and sensor engagement should be checked during fit-up\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended if you lack a torque wrench or press\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality assurances and post-sale support does Autoround provide?\u003c\/h3\u003e\n\u003cp\u003eAutoround states their wheel bearing and hub assemblies are tested to meet or exceed OEM standards. The product listing notes a three-year quality assurance period and direct customer support via Autoround Customer Service on Amazon for questions or warranty claims.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuality-tested to match OEM fit and performance expectations\u003c\/li\u003e\n  \u003cli\u003eThree-year QA coverage from Autoround for manufacturing issues\u003c\/li\u003e\n  \u003cli\u003eCustomer service available through the Amazon seller channel\u003c\/li\u003e\n  \u003cli\u003eReplaces multiple OEM numbers for straightforward parts matching\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Autoround 513294 front wheel hub assembly is aimed at owners, independent mechanics, and repair shops replacing worn or noisy front hubs on 2007–2012 Nissan Altima 2.5L (29-spline, ABS models). Choose this assembly if you want a pre-assembled hub\/bearing that matches OEM geometry, reduces bench time, and is backed by multi-year quality support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hub include the wheel bearing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Autoround 513294 is a pre-assembled hub that includes the wheel bearing for faster installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this on non-ABS Altima models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — this unit is specified for ABS-equipped 2007–2012 Altima 2.5L models with 29 splines.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55170575597911,"sku":"B089KH2H8H","price":130.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-513294-front-hub-front-view.jpg?v=1790431119"},{"product_id":"autoround-front-wheel-hub-assembly-2-pack-for-toyota-tacoma-4runner-fj-cruiser-2wd-6-lug-sealed-bearings","title":"Autoround Front Wheel Hub Assembly 2-Pack for Toyota Tacoma, 4Runner \u0026 FJ Cruiser (2WD, 6-Lug, Sealed Bearings)","description":"\u003cp\u003e\u003cstrong\u003eThe Autoround 2-Pack front wheel bearing and hub assembly (950-004) replaces worn front hubs on compatible 2WD Toyota Tacoma, 4Runner and FJ Cruiser models, restoring smooth rotation and secure wheel mounting.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Toyota shows vibration, rough steering, or abnormal wheel noise, a worn hub assembly can be the culprit. This Autoround 950-004 replacement kit includes two preassembled front wheel hubs designed for specific 2WD Toyota models and lug configurations, engineered to match original-equipment fit and restore proper wheel alignment and rotation. It’s a sealed unit intended to reduce contaminants, minimize noise, and simplify installation when performed by a professional mechanic.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Toyota models and years does this hub assembly fit?\u003c\/h3\u003e\n\u003cp\u003eThis 2-pack is built for front axle, rear-wheel-drive (2WD) configurations with six-lug wheels. It covers a range of Toyota models and model years with specific trim notes—double-check your vehicle’s layout before ordering.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Toyota 4Runner: 2003–2019 (Front; RWD)\u003c\/li\u003e\n\u003cli\u003eCompatible with FJ Cruiser: 2007–2009 (Front; RWD)\u003c\/li\u003e\n\u003cli\u003eCompatible with Tacoma: select years 2005–2019 (Front; various RWD prerunner and SR5\/TRD Sport trims)\u003c\/li\u003e\n\u003cli\u003eVerify fit using your vehicle VIN or the product compatibility tool before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this hub assembly improve driving feel and safety?\u003c\/h3\u003e\n\u003cp\u003eA properly functioning hub assembly keeps the wheel secured to the axle, maintains smooth bearing rotation, and prevents excess play that can cause vibration or steering instability. Replacing a failing hub reduces noise, improves handling predictability, and restores correct ABS sensor mounting where applicable.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSealed bearing design reduces contamination and extends service life\u003c\/li\u003e\n\u003cli\u003ePrecision flange dimensions restore correct wheel position and bolt circle alignment\u003c\/li\u003e\n\u003cli\u003eABS-compatible version ensures proper sensor operation on equipped vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the technical specifications and replacement cross-references?\u003c\/h3\u003e\n\u003cp\u003eThe Autoround 950-004 is engineered to match key OE dimensions so hub flange and bolt pattern align with the factory rotor and wheel. Check the flange diameter and bolt circle before installation to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor 2WD applications only, 6-lug configuration\u003c\/li\u003e\n\u003cli\u003eFlange diameter: 6.57 in; Bolt circle diameter: 5.5 in; Flange offset: 2.15 in\u003c\/li\u003e\n\u003cli\u003eReplaces part numbers: 950004, SK950004, 29594448, 515040 (2WD)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and product support?\u003c\/h3\u003e\n\u003cp\u003eAutoround hub assemblies are sold as direct-replacement units but require professional installation to ensure torque specifications, axle preload (if applicable), and safe wheel mounting. The assembly ships sealed and ready to install; follow vehicle service manual procedures for safe removal and fitment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional operation is recommended for correct installation and torque settings\u003c\/li\u003e\n\u003cli\u003eCheck Amazon Confirmed Fit or product compatibility tab before ordering\u003c\/li\u003e\n\u003cli\u003eAutoround provides 3 years of after-sales support via their customer service channel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 2-pack from Autoround is intended for owners of compatible Toyota Tacoma, 4Runner, or FJ Cruiser models with 2WD, six-lug front axles who need a direct-fit replacement hub assembly. It suits DIY-savvy vehicle owners working with a trusted mechanic or independent shops seeking an OE-dimensioned, sealed hub assembly to restore wheel stability and quiet operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hub assembly compatible with 4WD Toyota models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This Autoround 950-004 hub assembly is for 2WD front axles only; it does not fit 4WD or AWD applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include ABS sensor components?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The assembly is ABS-compatible and has proper mounting, but external sensors or wiring harnesses are not included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55170609774935,"sku":"B08SJ3YRHW","price":212.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-front-hub-assembly-front-view_51b990b1-f220-472d-9ca0-57f21d29535d.jpg?v=1790431678"},{"product_id":"autoround-rear-wheel-hub-assembly-for-toyota-corolla-2003-2008-5-lug-abs-compatible-pre-assembled","title":"Autoround Rear Wheel Hub Assembly for Toyota Corolla 2003–2008 — 5-Lug ABS Compatible, Pre-Assembled","description":"\u003cp\u003e\u003cstrong\u003eThe Autoround 512217 rear wheel hub assembly is a direct-fit, 5-lug ABS-compatible replacement engineered to restore rear wheel mounting and bearing performance on select Toyota and related models from 2000–2010.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis wheel hub assembly is built to match factory fit and function for a range of vehicles that share the same rear hub specifications. Designed for ABS-equipped, front-wheel-drive applications, the unit integrates the bearing and hub flange so you replace a worn or noisy hub quickly and regain proper wheel alignment and secure mounting. The product listing below explains compatibility, installation considerations, performance details, and who will benefit most from this part.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles is this hub assembly compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe Autoround 512217 is compatible with a group of Toyota-based vehicles that use a common hub specification. It fits ABS models across multiple model years and also replaces several OEM part numbers, making it a practical cross-reference option for repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 2003–2008 Toyota Corolla and Matrix (rear, ABS models)\u003c\/li\u003e\n  \u003cli\u003eFits 2003–2008 Pontiac Vibe and 2004–2009 Toyota Prius rear hubs\u003c\/li\u003e\n  \u003cli\u003eAlso matches 2000–2005 Toyota Celica and 2005–2010 Scion tC front-wheel-drive ABS models\u003c\/li\u003e\n  \u003cli\u003eCross-replaces OEM numbers like 42450-01010, 42450-01020, 42450-02070 and others\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Autoround hub match OEM specifications?\u003c\/h3\u003e\n\u003cp\u003eThis assembly is manufactured to meet or exceed OEM tolerances for flange diameter, bolt circle and offset so it installs and functions like the original part. Critical dimensions ensure correct wheel centering and to maintain ABS sensor operation where applicable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlange diameter: 135 mm for accurate wheel seat\u003c\/li\u003e\n  \u003cli\u003eFlange offset: 54.5 mm to preserve suspension geometry\u003c\/li\u003e\n  \u003cli\u003eBolt circle diameter: 100 mm with 5-lug configuration\u003c\/li\u003e\n  \u003cli\u003eIncludes bearings pre-assembled for straightforward replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and performance?\u003c\/h3\u003e\n\u003cp\u003eThe unit is supplied as a fully assembled hub-and-bearing module to reduce install time and complexity. Proper installation requires standard hub removal tools and following torque specs; installation by a professional or experienced DIYer is recommended to ensure safety and correct ABS sensor alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled hub and bearing for faster swap-out jobs\u003c\/li\u003e\n  \u003cli\u003eEngineered for precise structure and reliable rotation under load\u003c\/li\u003e\n  \u003cli\u003eCompatible with existing ABS tone rings and sensors in supported models\u003c\/li\u003e\n  \u003cli\u003eRecommended to follow vehicle torque specs and wheel alignment after replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support does Autoround provide?\u003c\/h3\u003e\n\u003cp\u003eAutoround backs this hub assembly with a quality assurance period and customer support through their sales channels. If you encounter fitment or performance questions, their support team can assist with part verification and troubleshooting steps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3-year QA coverage from Autoround for manufacturing defects\u003c\/li\u003e\n  \u003cli\u003eCustomer service available via the vendor platform for part questions\u003c\/li\u003e\n  \u003cli\u003eDocumentation and part cross-reference included to confirm fitment before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This hub assembly suits independent mechanics, professional repair shops, and DIY vehicle owners needing a direct replacement for worn or noisy rear wheel hubs on the listed Toyota-based models. It’s ideal for anyone who wants a pre-assembled, OEM-dimensioned hub with ABS compatibility and manufacturer-backed support for routine wheel-end repairs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hub fit ABS-equipped 2005 Toyota Corolla?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—Autoround 512217 fits ABS models of 2003–2008 Toyota Corolla; confirm rear hub application and VIN cross-reference before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the bearing pre-installed in this hub assembly?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the bearing is pre-assembled into the hub for faster installation and reduced labor time.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55170619965783,"sku":"B0CD2899CV","price":135.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-rear-hub-front-view.jpg?v=1790431961"},{"product_id":"autoround-front-wheel-hub-assembly-for-ford-f-250-f-350-2005-2010-8-lug-4wd-srw-with-abs-preinstalled-bearings","title":"Autoround Front Wheel Hub Assembly for Ford F-250 F-350 (2005–2010) 8-Lug 4WD SRW with ABS, Preinstalled Bearings","description":"\u003cp\u003e\u003cstrong\u003eAutoround 515081 is a direct-fit front wheel hub assembly built for 2005–2010 Ford F-250 and F-350 Super Duty 4WD SRW applications with ABS, offering a complete, test-verified replacement for worn or damaged hubs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Super Duty shows wheel play, unusual noise, or ABS warning lights, the hub assembly is a common wear item that restores steering stability and prevents bearing failure. Autoround’s 515081 hub is designed to match the original equipment dimensions—flange diameter, bolt circle, lug count and offset—so it installs without modifying the axle or brake components.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Autoround 515081 match my truck’s original hub?\u003c\/h3\u003e\n\u003cp\u003eThis hub was manufactured to mirror OEM fit and geometry for 2005–2010 Ford F-250 and F-350 Super Duty 4WD SRW models with ABS. That means the bolt circle, flange diameter and offset correspond to factory specs to maintain wheel alignment and rotor clearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 4WD single rear wheel (SRW) front axle configurations\u003c\/li\u003e\n  \u003cli\u003e8 lug design compatible with specified models\u003c\/li\u003e\n  \u003cli\u003eFlange diameter: 7.99 in; bolt circle diameter: 6.69 in\u003c\/li\u003e\n  \u003cli\u003eFlange offset: 1.83 in to preserve wheel fitment and brake caliper clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the performance and quality characteristics of this hub?\u003c\/h3\u003e\n\u003cp\u003eAutoround wheel hubs are engineered and tested to meet or exceed OEM performance criteria. The assembly includes pre-pressed bearings and ABS tone ring where applicable, reducing the chance of premature failure and simplifying installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory-style materials and heat treatment for bearing surfaces\u003c\/li\u003e\n  \u003cli\u003eABS compatibility to prevent sensor errors after replacement\u003c\/li\u003e\n  \u003cli\u003ePreassembled for consistent bearing preload and sealing\u003c\/li\u003e\n  \u003cli\u003eQuality-tested by Autoround to ensure durability under normal driving loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be quick for experienced technicians and competent DIYers with the right tools. Because the assembly is a direct replacement, you typically remove the old hub and press the new unit into place without custom machining or modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit replacement—no axle or brake alterations required\u003c\/li\u003e\n  \u003cli\u003ePreinstalled bearing and seals speed up the swap\u003c\/li\u003e\n  \u003cli\u003eFollow torque specs for wheel studs and axle nut for safe operation\u003c\/li\u003e\n  \u003cli\u003eMay require wheel alignment check after installation in some cases\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich part numbers and models does this hub replace?\u003c\/h3\u003e\n\u003cp\u003eThe Autoround 515081 is intended as a replacement for common OEM and aftermarket references used on the specified Super Duty years, helping you cross-reference repairs quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces parts listed as 515081 in many catalogs\u003c\/li\u003e\n  \u003cli\u003eCross-references BR930695 and SP940200 in aftermarket listings\u003c\/li\u003e\n  \u003cli\u003eSpecifically for front axle, ABS-equipped 4WD SRW Ford Super Duty trucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Autoround 515081 hub assembly is aimed at owners and mechanics servicing 2005–2010 Ford F-250 and F-350 Super Duty 4WD SRW trucks who need a reliable, OEM-dimension replacement—whether remedying worn bearings, eliminating noise or restoring ABS function. It’s a practical option for fleet maintenance, independent shops and experienced DIYers who require a tested, ready-to-install hub that preserves vehicle handling and brake component alignment. Autoround backs the product with a three-year QA support offering and customer service for fitment questions or assistance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this hub fit my 2007 Ford F-250 4WD with ABS?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Autoround 515081 is designed for 2005–2010 Ford F-250 and F-350 Super Duty 4WD SRW models with ABS.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this assembly include bearings and ABS tone ring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The assembly comes preassembled with bearings and the ABS tone ring where required for direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55170638905687,"sku":"B07VW6QJ5Z","price":207.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-front-hub-assembly-front-view_16ff6740-a244-4b00-acb1-0999697958b7.jpg?v=1790432219"},{"product_id":"autoround-front-wheel-hub-assembly-for-jeep-5-lug-non-abs-direct-fit-3-year-qa","title":"Autoround Front Wheel Hub Assembly for Jeep 5‑Lug Non‑ABS — Direct-Fit, 3‑Year QA","description":"\u003cstrong\u003eAutoround 513084 is a front wheel hub bearing assembly engineered to replace the original hub on select Jeep Cherokee, Grand Cherokee, Wrangler, Comanche and Wagoneer models with a 5-lug, non-ABS setup.\u003c\/strong\u003e\n\n\u003cp\u003eThis direct-fit hub assembly restores front wheel mounting, bearing support and flange interface for compatible Jeep models from late 1980s through 1999. It’s designed as a replacement for worn or damaged hubs, matching key OE dimensions like flange diameter and offset while providing a straightforward installation for technicians and DIYers. The unit is quality-tested by Autoround and backed by a three-year QA policy.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Jeep models and years does this hub fit?\u003c\/h3\u003e\n\u003cp\u003eThe Autoround 513084 hub assembly covers a wide range of Jeep vehicles including Cherokee, Grand Cherokee, Wrangler, Comanche and Wagoneer model years primarily between 1989 and 1999. Fitment depends on front-wheel configuration and whether the vehicle uses a non-ABS front hub or a composite rotor design in specified years.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1989 Cherokee (Front; RWD)\u003c\/li\u003e\n  \u003cli\u003e1990–1998 Cherokee (Front; all models) and 1999 Cherokee (1st design; composite rotor)\u003c\/li\u003e\n  \u003cli\u003e1990–1998 Wrangler and 1997–1999 TJ (Front; all models)\u003c\/li\u003e\n  \u003cli\u003e1993–1998 Grand Cherokee, 1990 Comanche, 1990 Wagoneer, 1993 Grand Wagoneer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications and how do they affect installation?\u003c\/h3\u003e\n\u003cp\u003eThis hub assembly is a 5-lug, non-ABS unit with a flange diameter of 6.04 inches and a flange offset of 2.14 inches. Those dimensions are critical to ensure correct wheel positioning, rotor clearance and bearing preload when replacing the original hub.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5-lug pattern — matches stock wheel bolt layout\u003c\/li\u003e\n  \u003cli\u003eFlange diameter: 6.04 in — ensures rotor and wheel seating\u003c\/li\u003e\n  \u003cli\u003eFlange offset: 2.14 in — aligns wheel hub relative to spindle\u003c\/li\u003e\n  \u003cli\u003eNon-ABS — for vehicles without ABS wheel sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this unit compare to the original equipment and which part numbers does it replace?\u003c\/h3\u003e\n\u003cp\u003eAutoround designs this assembly to meet or exceed OEM fit and function, using tested bearings and a precise flange interface. It is supplied as a direct replacement for several OE references so you can cross-check compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces: 53007449, H513084, BR930014, 713084, PT513084, 720-0009\u003c\/li\u003e\n  \u003cli\u003eQuality-tested to meet or exceed OEM performance standards\u003c\/li\u003e\n  \u003cli\u003eComes preassembled for faster installation and reduced shop labor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and aftercare?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for most front-hub replacements: remove the brake rotor and caliper, unbolt the old hub, and press or bolt the new assembly in place depending on model specifics. After installation, verify torque specs, wheel alignment and wheel bearing preload to ensure safe operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePreassembled hub speeds replacement time\u003c\/li\u003e\n  \u003cli\u003eCheck factory torque specifications for axle nut and wheel lug nuts\u003c\/li\u003e\n  \u003cli\u003eInspect rotors and brake components for wear while access is open\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Autoround 513084 hub assembly is targeted at owners and mechanics working on older Jeep models that require a non-ABS, 5-lug front hub replacement. It’s especially useful for shops and DIY enthusiasts seeking a direct-fit, quality-tested alternative to expensive OEM parts, backed by Autoround’s three-year QA support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hub assembly ABS or non-ABS?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This Autoround 513084 hub is non-ABS and intended for vehicles without wheel speed sensors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this unit fit a 1997 Wrangler TJ?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the 513084 hub is listed as a direct-fit for 1997–1999 TJ front assemblies.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55170644869463,"sku":"B08998S8QB","price":134.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-front-packaging.jpg?v=1790432288"},{"product_id":"autoround-water-pump-aw7163-with-gasket-fits-3-7l-4-7l-jeep-grand-cherokee-1999-2013-oe-fit-sealed-bearings","title":"Autoround Water Pump AW7163 with Gasket — Fits 3.7L \u0026 4.7L Jeep Grand Cherokee 1999–2013, OE-fit Sealed Bearings","description":"\u003cp\u003e\u003cstrong\u003eThe Autoround AW7163 water pump is a direct-fit replacement coolant pump with gasket engineered to restore proper coolant circulation on compatible 3.7L and 4.7L Chrysler\/Dodge\/Jeep engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pump is designed to meet or exceed original-equipment dimensions and performance for a range of Chrysler‑based vehicles from the late 1990s through early 2010s. It ships with the necessary gasket and seals, uses permanently sealed bearings, and is factory-tested to reduce the risk of leaks and premature failure. Below you’ll find clear answers to common buyer questions and the concrete specifications technicians and DIYers care about.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines will this Autoround pump fit?\u003c\/h3\u003e\n\u003cp\u003eThe AW7163 is compatible with many Chrysler, Dodge, Jeep and Mitsubishi models that use 3.7L V6 or 4.7L V8 engines. Check the year and engine code before ordering to confirm fitment for your specific vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eJeep Grand Cherokee 1999–2010 (3.7L \u0026amp; 4.7L)\u003c\/li\u003e\n  \u003cli\u003eJeep Liberty 2002–2012 (3.7L)\u003c\/li\u003e\n  \u003cli\u003eJeep Commander 2006–2010, Chrysler Aspen 2007–2009\u003c\/li\u003e\n  \u003cli\u003eDodge Dakota 2000–2010, Durango 2000–2009, Nitro 2007–2011\u003c\/li\u003e\n  \u003cli\u003eRam 1500 2002–2013 and Mitsubishi Raider 2006–2009 — see interchange numbers below\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable and durable is this replacement water pump?\u003c\/h3\u003e\n\u003cp\u003eAutoround builds this pump to meet OE form, fit and function and subjects it to factory pre-testing for leak resistance. Permanently sealed, lubricated bearings and quality casting reduce wear under normal operating conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-level dimensions for straightforward installation\u003c\/li\u003e\n  \u003cli\u003eHigh-load sealed bearings for longer service life\u003c\/li\u003e\n  \u003cli\u003eFactory leak testing to minimize early failures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is included and how difficult is installation?\u003c\/h3\u003e\n\u003cp\u003eThe shipment includes the water pump plus gasket and seals so you get the parts needed to reinstall the cooling system without sourcing extra components. Installation difficulty depends on vehicle model and access; some engines require removal of accessories or the front timing cover for full access.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes with correct gasket and seals for a complete swap\u003c\/li\u003e\n  \u003cli\u003eTypical tools: socket set, torque wrench, coolant catch pan\u003c\/li\u003e\n  \u003cli\u003eExpect moderate labor—professional help recommended if access is tight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat interchange and part numbers should I verify?\u003c\/h3\u003e\n\u003cp\u003eUse the listed interchange numbers to cross-check with your OEM or existing pump before purchasing. Matching part numbers avoids returns and fitment issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutoround AW7163\u003c\/li\u003e\n  \u003cli\u003eCommon OEM\/alternate numbers: 120-4350, 53021187AA, 53020873AB, 53020873AC\u003c\/li\u003e\n  \u003cli\u003eAlso referenced as 53071187AC and 53011380AG in some parts catalogs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Autoround AW7163 water pump is for owners and mechanics working on late‑1990s to early‑2010s Mopar and related vehicles with 3.7L or 4.7L engines who want a factory‑dimension replacement with sealed bearings and included gasket. It’s appropriate for routine replacement when the original pump shows leakage, bearing noise, or reduced coolant flow, and for anyone seeking a cost‑effective aftermarket replacement that aligns with OE specifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Autoround AW7163 include the gasket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The AW7163 ships with the correct gasket and seals needed for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which vehicles are covered by this water pump fitment?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits many Chrysler\/Dodge\/Jeep models 1999–2013 with 3.7L or 4.7L engines; verify with listed interchange numbers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55171206349143,"sku":"B08NJKSJQ3","price":68.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-aw7163-front-view.jpg?v=1790440501"},{"product_id":"autoround-front-wheel-hub-and-bearing-assembly-fit-for-2009-2010-dodge-ram-1500-5-lug-w-abs-pre-assembled-direct-fit","title":"Autoround front wheel hub and bearing assembly fit for 2009-2010 Dodge Ram 1500 5-lug w\/ABS — pre-assembled direct-fit","description":"\u003cp\u003e\u003cstrong\u003eAutoround 515126 is a complete front wheel hub and bearing assembly built to replace the original hub on 2009–2010 Dodge Ram 1500 and some 2011 Ram 1500 models with 5-lug wheels and ABS.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis direct-fit assembly combines the bearing and hub flange into a single pre-assembled unit engineered to restore wheel tracking, reduce vibration, and simplify installation. Manufactured to meet or exceed OEM performance checks, the Autoround 515126 is designed for drivers who need a reliable replacement part without the hassle of bearing packing or separate component alignment.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Ram 1500 years and configurations does this hub fit?\u003c\/h3\u003e\n\u003cp\u003eThe Autoround 515126 is targeted for select 2009–2010 Dodge Ram 1500 and some 2011 Ram 1500 applications that use a 5-lug front axle with an ABS tone ring. Always confirm fitment against your VIN, axle side, and existing hub specifications before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models listed: 2009, 2010 Dodge Ram 1500 and certain 2011 Ram 1500 variants\u003c\/li\u003e\n  \u003cli\u003eDesigned for 5-lug front axle setups\u003c\/li\u003e\n  \u003cli\u003eIncludes ABS tone ring for vehicles with ABS systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this assembly simplify installation compared with separate bearings?\u003c\/h3\u003e\n\u003cp\u003eBecause the bearing and hub are pre-assembled, you avoid pressing operations and reduce assembly time. The unit arrives ready to bolt on, which lowers the chance of installation errors and shortens time in the garage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled hub and bearing ready for direct bolt-on replacement\u003c\/li\u003e\n  \u003cli\u003ePrecision structure minimizes alignment adjustments during fitting\u003c\/li\u003e\n  \u003cli\u003eCompatible flange and bolt circle measurements reduce fit uncertainty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications and part references to check?\u003c\/h3\u003e\n\u003cp\u003eKnowing the critical dimensions and cross-reference numbers ensures you order the correct replacement. This assembly lists flange, bolt circle, and offset specifications that match common OEM values for compatible Rams.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlange diameter: 7.2 in; flange offset: 1.84 in\u003c\/li\u003e\n  \u003cli\u003eBolt circle diameter: 5.5 in; 5-lug configuration\u003c\/li\u003e\n  \u003cli\u003eCross-replaces: 515126, WE61050, BR930808, 68024245AA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality and warranty support does Autoround provide?\u003c\/h3\u003e\n\u003cp\u003eAutoround assemblies are tested to meet or exceed OEM performance criteria, and the brand backs the product with a limited quality assurance period. Customer support through Autoround is available to answer fitment or installation questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured and tested to match OEM-level standards\u003c\/li\u003e\n  \u003cli\u003e3 years of QA coverage from Autoround\u003c\/li\u003e\n  \u003cli\u003eCustomer service available for fitment or after-sales inquiries\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Autoround 515126 front hub and bearing assembly is intended for DIY mechanics, professional technicians, and Ram 1500 owners who need a direct-fit, ABS-compatible replacement that trims installation time and restores wheel smoothness. Confirm your vehicle’s model year, axle configuration, and ABS requirement to ensure proper fit before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hub come with an ABS tone ring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Autoround 515126 includes an ABS tone ring for compatible ABS-equipped Ram 1500 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this a direct bolt-on replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The assembly is pre-assembled for direct bolt-on installation on listed 2009–2011 Ram 1500 applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55171320349015,"sku":"B08SHZGZVB","price":107.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-front-hub-assembly-front-view_43abea32-ca32-4487-80e6-3e53ea7dbd07.jpg?v=1790442469"},{"product_id":"autoround-rear-wheel-hub-assembly-512333-for-jeep-compass-patriot-2007-2017-integrated-bearing-abs-tone-ring","title":"Autoround Rear Wheel Hub Assembly 512333 for Jeep Compass \u0026 Patriot 2007–2017 — Integrated Bearing \u0026 ABS Tone Ring","description":"\u003cp\u003e\u003cstrong\u003eThe Autoround 512333 Rear Wheel Hub Assembly is a direct-fit replacement hub and bearing unit engineered for 2007–2017 Jeep Compass and Patriot (4WD) and 2007–2008 Dodge Caliber (AWD) applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis precision-engineered rear wheel hub assembly combines an integrated bearing, ABS tone ring, and mounting flange to restore factory-style fit and function on compatible vehicles. Designed for all-wheel drive and four-wheel drive rear axles, the unit meets common OEM dimensions—including a 5-lug pattern, 4.5\" bolt circle diameter, 5.53\" flange diameter, and 2.39\" flange offset—so installation is straightforward for professional technicians and experienced DIYers. Autoround tests these assemblies to align with OEM performance expectations and supports the part with a multi-year quality assurance policy.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this hub assembly fit my 2009 Jeep Compass rear axle?\u003c\/h3\u003e\n\n\u003cp\u003eThe 512333 is built to match the rear hub geometry used on 2007–2017 Jeep Compass 4WD models. It mounts to the original stud pattern and attaches directly to the rear axle flange, aligning with the vehicle's ABS system and rear brake components.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e5-lug configuration compatible with factory wheel studs\u003c\/li\u003e\n  \u003cli\u003eBolt circle diameter: 4.5\" to match OEM wheels and rotors\u003c\/li\u003e\n  \u003cli\u003eFlange diameter 5.53\" and offset 2.39\" for correct wheel positioning\u003c\/li\u003e\n  \u003cli\u003ePre-incorporated ABS tone ring for speed sensor integration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the installation process involve and how long will it take?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation typically follows standard rear hub replacement steps and is faster when the vehicle is on a lift with proper tools. Expect removal of the brake rotor, caliper, and old hub unit, followed by bolting the new Autoround hub to the axle and reconnecting the ABS sensor and brake components.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTime estimate: 1–2 hours for an experienced mechanic per side\u003c\/li\u003e\n  \u003cli\u003eRequires torque wrench for proper mounting bolt torque\u003c\/li\u003e\n  \u003cli\u003eNo press-fit bearing work—unit arrives preassembled\u003c\/li\u003e\n  \u003cli\u003eReconnect ABS wiring and verify sensor alignment after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this hub assembly work with my vehicle's ABS and drivetrain?\u003c\/h3\u003e\n\n\u003cp\u003eThis hub assembly includes an ABS tone ring and is specified for AWD\/4WD rear applications, so it supports the original anti-lock braking feedback and drivetrain layout on compatible models. Confirm vehicle compatibility by matching part numbers or cross-referenced OEM replacements before purchase.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes ABS tone ring compatible with factory speed sensors\u003c\/li\u003e\n  \u003cli\u003eSpecified for rear axle use on AWD and 4WD models only\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM references such as 5105770AD and BR930649\u003c\/li\u003e\n  \u003cli\u003eQuality-tested to align with OEM performance standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this replacement hub and what warranty support is offered?\u003c\/h3\u003e\n\n\u003cp\u003eAutoround designs the 512333 hub assembly to withstand normal driving loads and to meet or exceed typical OEM quality checks. The product is backed by Autoround's stated three-year quality assurance support, and customer service is available for fitment questions or post-purchase assistance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed as a complete hub-and-bearing assembly for longevity\u003c\/li\u003e\n  \u003cli\u003eQuality-tested to align with OEM benchmarks\u003c\/li\u003e\n  \u003cli\u003eThree years of QA coverage through Autoround customer service\u003c\/li\u003e\n  \u003cli\u003eAvailable replacement cross-references included for verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Autoround 512333 Rear Wheel Hub Assembly is intended for owners or technicians working on 2007–2017 Jeep Compass and Patriot 4WD models and 2007–2008 Dodge Caliber AWD models who need a cost-effective, OEM-dimension replacement hub. It suits garages performing routine hub replacements, restoration projects where correct ABS tone ring function is required, and DIY mechanics who can follow standard hub-removal and bolting procedures. Verify your vehicle's drivetrain (AWD\/4WD) and original part numbers before ordering to ensure a proper match.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Autoround 512333 hub compatible with front axles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This 512333 assembly is specified for rear axles on AWD\/4WD models only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the hub include an ABS tone ring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The unit includes an ABS tone ring compatible with factory speed sensors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55171331883351,"sku":"B08T7ZDPR8","price":83.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-hub-front-view_bfe5c6e9-a1d3-4525-bbc1-c19dbe43949c.jpg?v=1790442897"},{"product_id":"autoround-front-wheel-hub-assembly-for-1997-2011-chevrolet-impala-pre-assembled-abs-ready-oem-fit-replacement","title":"Autoround Front Wheel Hub Assembly for 1997–2011 Chevrolet Impala — Pre-assembled ABS-ready, OEM-fit replacement","description":"\u003cp\u003e\u003cstrong\u003eAutoround 513121 is a direct-replacement front wheel hub assembly engineered to restore proper wheel mounting, ABS sensor function, and reliable bearing performance on select 1997–2013 GM vehicles including the Chevrolet Impala.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis hub assembly is a ready-to-install unit that combines the wheel bearing and hub flange into one pre-assembled part to speed up repair time and reduce installation complexity. It is manufactured and tested by Autoround to meet or exceed OEM fitment and performance expectations, with specifications for flange diameter, offset, bolt pattern and ABS compatibility included so you can confirm fit before buying.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this Autoround hub fit?\u003c\/h3\u003e\n\u003cp\u003eThis part covers a wide span of General Motors platforms across Chevrolet, Buick, Cadillac, Pontiac, Oldsmobile and Saturn. Fitment varies by model year, drive type (FWD\/AWD) and front or rear position, so check the listed model-specific notes carefully to ensure correct placement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet Impala 2000–2013 (front; 4-wheel ABS; first design with steel sensor wire clip)\u003c\/li\u003e\n  \u003cli\u003eBuick models such as Allure, Century, LaCrosse, LeSabre, Lucerne, Park Avenue, Regal, Riviera and more (front FWD; select rear AWD)\u003c\/li\u003e\n  \u003cli\u003eCadillac DeVille, DTS, Eldorado, Seville (front; FWD; note exclusions for heavy-duty suspension)\u003c\/li\u003e\n  \u003cli\u003ePontiac, Oldsmobile and Saturn coverage for specific years and front\/rear AWD or FWD applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this hub assembly match OEM specifications?\u003c\/h3\u003e\n\u003cp\u003eThe Autoround 513121 hub is built with the flange dimensions and bolt circle that correspond to the original equipment design so wheel mounting and brake rotor alignment remain correct. It also includes ABS sensor compatibility where required, and is pre-assembled to maintain bearing preload and seal integrity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlange diameter: 5.73 in — aligns with original rotor mounting surface\u003c\/li\u003e\n  \u003cli\u003eFlange offset: 1.65 in — preserves wheel offset and track width\u003c\/li\u003e\n  \u003cli\u003eBolt circle diameter: 4.53 in — correct lug pattern for listed models\u003c\/li\u003e\n  \u003cli\u003eABS-ready configuration: supports vehicles with 4-wheel ABS and steel sensor wire clip\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the installation and performance benefits?\u003c\/h3\u003e\n\u003cp\u003eThe unit arrives assembled to reduce labor time compared with rebuilding bearings, and is designed for straightforward swap-in replacement with common shop tools. Autoround performs quality testing intended to match OEM durability so the hub delivers dependable rotation and consistent ABS signals when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled bearing and hub reduces service steps and shop hours\u003c\/li\u003e\n  \u003cli\u003ePrecision structure for accurate wheel alignment and rotor seating\u003c\/li\u003e\n  \u003cli\u003eTested to meet or exceed OEM performance standards for reliability\u003c\/li\u003e\n  \u003cli\u003e3-year after-sales support through Autoround customer service for questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there fitment cautions or special notes to consider?\u003c\/h3\u003e\n\u003cp\u003eDouble-check your vehicle’s year, drive type (FWD or AWD), and whether the part is for the front or rear axle before ordering. Some Cadillac models exclude heavy-duty suspension applications, and certain AWD models require a rear-specific part—verify the fitment list to avoid returns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify front vs rear fitment for AWD vehicles like Rendezvous, Terraza, Uplander and Montana\u003c\/li\u003e\n  \u003cli\u003eCadillac DeVille\/DTS exclude heavy-duty suspension variants\u003c\/li\u003e\n  \u003cli\u003eImpala fitment denotes first-design hub with steel ABS sensor wire clip\u003c\/li\u003e\n  \u003cli\u003eConsult vehicle-specific service manual for torque and installation procedures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Professional mechanics, independent repair shops, and do-it-yourself vehicle owners who need a direct, reliable replacement hub for selected GM cars and crossovers. If you require a pre-assembled, ABS-compatible hub with defined flange and bolt-pattern specifications to restore correct wheel mounting and bearing performance, the Autoround 513121 is designed to address those needs while offering three years of after-sales support for fitment or installation questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hub assembly compatible with my 2006 Impala?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—select 2000–2013 Impala models use this front hub if they are the first-design with a steel ABS sensor wire clip. Confirm your vehicle’s ABS wiring and hub design before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this part include warranty or after-sales support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Autoround provides 3 years of after-sales support; contact Autoround Customer Service for fitment or installation help within 24 hours.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55171402367319,"sku":"B0833V5KMT","price":105.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-513121-front-hub-assembly-front-view.jpg?v=1790444280"},{"product_id":"autoround-front-wheel-hub-assembly-for-honda-cr-v-element-br930580k-pre-assembled-5-lug-direct-fit-with-abs-support","title":"Autoround Front Wheel Hub Assembly for Honda CR-V \u0026 Element BR930580K — Pre-assembled 5-Lug Direct-Fit with ABS Support","description":"\u003cp\u003e\u003cstrong\u003eAutoround BR930580K is a pre-assembled front wheel hub and bearing built to replace the factory hub on compatible Honda CR-V and Element models for reliable steering and wheel alignment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Autoround wheel hub assembly is engineered as a direct-fit replacement for specific Honda CR-V and Element years, combining the bearing and hub flange into one ready-to-install unit. It restores proper wheel mounting, supports ABS tone ring setups where applicable, and is designed to meet or exceed original equipment performance standards. The assembly simplifies service by eliminating the need to press bearings in and out while offering measured dimensions that match factory specifications.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and model years does this hub assembly fit?\u003c\/h3\u003e\n\u003cp\u003eThis BR930580K hub is specified for front axle use on a range of Honda CR-V and Element models. Confirm fit by cross-referencing part numbers or your vehicle's VIN before purchase to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2002–2004 Honda CR-V (Front; 4-Wheel ABS)\u003c\/li\u003e\n  \u003cli\u003e2005–2006 Honda CR-V (Front; all models)\u003c\/li\u003e\n  \u003cli\u003e2003–2004 Honda Element (Front; 4-Wheel ABS)\u003c\/li\u003e\n  \u003cli\u003e2005–2011 Honda Element (Front; EX, LX)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications and physical measurements?\u003c\/h3\u003e\n\u003cp\u003eThe assembly is built with a five-lug configuration and exact pilot diameters to match the factory wheel mounting and hub piloting. These dimensions help maintain wheel concentricity and proper rotor alignment when installed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5 lug pattern for direct bolt-on replacement\u003c\/li\u003e\n  \u003cli\u003eFlange diameter: 5.48 inches; bolt circle diameter: 4.5 inches\u003c\/li\u003e\n  \u003cli\u003eHub pilot diameter: 1.77 inches; wheel pilot diameter: 2.52 inches\u003c\/li\u003e\n  \u003cli\u003eReplaces factory references including 295-96036 and BR930580K\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I expect during replacement?\u003c\/h3\u003e\n\u003cp\u003eThe Autoround hub assembly arrives pre-assembled to reduce shop time and eliminate pressing operations. Installation typically involves removing the old hub, seating the new assembly, and tightening to the manufacturer torque specs; no bearing packing is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled unit reduces labor and press work\u003c\/li\u003e\n  \u003cli\u003eFits existing knuckle and ABS tone ring setups where applicable\u003c\/li\u003e\n  \u003cli\u003eInstall using standard axle and hub torque procedures\u003c\/li\u003e\n  \u003cli\u003eDesigned for quick alignment of brake rotor and wheel mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality controls and support does Autoround provide?\u003c\/h3\u003e\n\u003cp\u003eAutoround tests its wheel hub assemblies to meet or exceed OEM performance expectations and backs the product with a multi-year quality assurance policy. Customer support is available for fitment questions or warranty assistance through the Autoround service channels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuality-tested to align with OEM standards\u003c\/li\u003e\n  \u003cli\u003e3-year quality assurance from Autoround\u003c\/li\u003e\n  \u003cli\u003eCustomer service available for fitment and support inquiries\u003c\/li\u003e\n  \u003cli\u003ePart designed to replace original equipment references\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Autoround BR930580K hub assembly is aimed at DIY mechanics, independent repair shops, and vehicle owners restoring or maintaining 2002–2006 Honda CR-Vs and compatible Element models who want a direct-fit replacement that saves labor and restores correct wheel mounting. If you need a pre-assembled front hub that matches factory dimensions and supports ABS-equipped vehicles on the listed years, this unit is a practical replacement option. Always verify vehicle year and axle side before ordering, and follow manufacturer torque and safety procedures during installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hub include the wheel bearing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the Autoround BR930580K is a pre-assembled hub and bearing unit ready for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 2005 CR-V?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits 2005 Honda CR-V front applications across all trim levels listed in compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55171412951383,"sku":"B0CD292QMG","price":120.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-front-hub-assembly-front-view_deaf56cb-df86-4dec-a4bc-0eaab914da53.jpg?v=1790444474"},{"product_id":"autoround-wheel-hub-assembly-for-2011-2019-ford-explorer-front-rear-abs-compatible-5-lug","title":"Autoround Wheel Hub Assembly for 2011–2019 Ford Explorer, Front\/Rear — ABS-Compatible, 5-Lug","description":"\u003cp\u003e\u003cstrong\u003eAutoround 512460 is a direct-fit front or rear wheel hub assembly engineered to restore proper wheel mounting and ABS compatibility on 2011–2019 Ford Explorer models and 2013–2019 Police Interceptor Utility.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis premium replacement hub assembly from Autoround is built to OEM-aligned dimensions and tested to meet rigorous quality standards. It replaces multiple factory part numbers and is offered with three years of quality assurance, making it a practical option for DIY mechanics and professional shops who need reliable fit, ABS sensor compatibility, and straightforward installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhat Ford applications does this hub assembly fit?\u003c\/h3\u003e\n\u003cp\u003eThe 512460 hub covers front and rear positions on several Explorer model years and the Police Interceptor Utility. Confirm vehicle year and hub position against the fitment list before purchasing to ensure exact compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFront: 2011–2012 Ford Explorer\u003c\/li\u003e\n  \u003cli\u003eRear: 2011–2019 Ford Explorer\u003c\/li\u003e\n  \u003cli\u003eFront\/Rear: 2013–2019 Ford Police Interceptor Utility (all models)\u003c\/li\u003e\n  \u003cli\u003eReplaces factory numbers: 512460, WE60589, HA590446, BR930809\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this assembly match OEM specifications and ABS systems?\u003c\/h3\u003e\n\u003cp\u003eAutoround designs this hub assembly to align with original equipment fit, form, and function so it integrates with factory ABS components. The included ABS-capable design helps maintain traction-control and anti-lock braking performance when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eABS-equipped hub for sensor compatibility\u003c\/li\u003e\n  \u003cli\u003eFlange diameter: 5.73 inches for correct wheel seating\u003c\/li\u003e\n  \u003cli\u003eBolt circle diameter: 4.5 inches to match factory wheels\u003c\/li\u003e\n  \u003cli\u003eFlange offset: 1.69 inches to preserve wheel offset and alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical and hardware features I should know?\u003c\/h3\u003e\n\u003cp\u003eThis hub assembly comes with a five-lug configuration and precision machining to ensure secure wheel mounting and even load distribution. Materials and tolerances are selected to deliver consistent running and to minimize premature wear under normal driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5 lug pattern for secure wheel attachment\u003c\/li\u003e\n  \u003cli\u003ePrecision bearing and hub machining for smooth rotation\u003c\/li\u003e\n  \u003cli\u003eDurable finish to resist corrosion and road exposure\u003c\/li\u003e\n  \u003cli\u003ePre-assembled unit simplifies the replacement process\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what support does Autoround provide?\u003c\/h3\u003e\n\u003cp\u003eThe 512460 hub assembly is supplied as a complete unit intended for direct fit replacement, which reduces labor time versus rebuilding a hub in-place. Autoround backs the product with a three-year quality assurance period and customer support channels to address fitment or installation questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled hub for quicker swap-in installs\u003c\/li\u003e\n  \u003cli\u003eDesigned for tight tolerances to ease alignment during mounting\u003c\/li\u003e\n  \u003cli\u003eThree years of QA from Autoround for peace of mind\u003c\/li\u003e\n  \u003cli\u003eCustomer service available through Autoround channels for help\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians, fleet managers, and vehicle owners who need a dependable, direct-fit wheel hub assembly for late-model Ford Explorers or Police Interceptor Utility vehicles. Choose this part if you want a ready-to-install, ABS-compatible replacement that follows OEM dimensions and is covered by a multiyear quality assurance program. Always verify the part number and vehicle application before ordering and follow proper installation and torque procedures or consult a professional installer for safety.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this hub fit both front and rear on my 2015 Ford Explorer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 512460 fits the rear of 2011–2019 Explorers and both front and rear on 2013–2019 Police Interceptor Utility. Check your wheel position and part cross-reference before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Autoround 512460 include ABS functionality?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — this hub assembly is ABS-compatible and designed to work with factory anti-lock brake sensors when installed correctly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55171437723991,"sku":"B07ZN48JHB","price":90.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-512460-front-view-hub-assembly.jpg?v=1790445272"},{"product_id":"autoround-water-pump-for-3-6l-v6-chrysler-dodge-jeep-ram-vw-routan-aw6169-with-gasket-oe-fit-sealed-bearings","title":"Autoround Water Pump for 3.6L V6 Chrysler Dodge Jeep Ram VW Routan — AW6169 with Gasket, OE-fit \u0026 Sealed Bearings","description":"\u003cp\u003e\u003cstrong\u003eThe Autoround AW6169 is a complete replacement water pump with gasket engineered to restore coolant circulation for 3.6L V6 Chrysler, Dodge, Jeep, Ram and VW applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe AW6169 unit is manufactured to match OE dimensions and mounting points so it installs without modification. It ships with the required sealing components and uses permanently lubricated, high-load bearings designed to resist wear under highway and towing conditions. This product listing covers common interchange numbers and the most frequent passenger and light-truck models that use the 3.6L engine, helping you confirm fit before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles is this pump compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe AW6169 fits a range of 3.6L Pentastar and related V6 applications across Chrysler, Dodge, Jeep, Ram and VW Routan platforms. Verify fitment against your vehicle’s year, engine code and OEM part cross-reference to be certain.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChrysler 300 and Town \u0026amp; Country (3.6L V6)\u003c\/li\u003e\n  \u003cli\u003eDodge Charger, Challenger, Durango, Journey, Grand Caravan, Avenger\u003c\/li\u003e\n  \u003cli\u003eRam 1500 (3.6L variants) and Jeep Grand Cherokee\u003c\/li\u003e\n  \u003cli\u003eVolkswagen Routan using the 3.6L engine\u003c\/li\u003e\n  \u003cli\u003eInterchange references: 18-2074, 1600-479731, AW6169, WP-2408, 120-4450\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the AW6169 perform compared to the original equipment pump?\u003c\/h3\u003e\n\u003cp\u003eAutoround designs this pump to meet or exceed OE form, fit, and function so performance closely matches the factory unit. Components are pre-tested at the factory to minimize leaks and ensure consistent operation under normal driving and towing loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-style housing and mounting points for direct replacement\u003c\/li\u003e\n  \u003cli\u003eSeals and gaskets included to reduce installation variables\u003c\/li\u003e\n  \u003cli\u003ePermanently sealed, lubricated bearings for long service life\u003c\/li\u003e\n  \u003cli\u003eFactory pre-test to confirm leak-free assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the same steps as the original pump—drain coolant, remove belt and any obstructing components, swap the pump and gasket, then refill and bleed the system. The included gasket kit streamlines assembly and reduces the need to source additional parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes with the necessary gasket and sealing components\u003c\/li\u003e\n  \u003cli\u003eDesigned for a direct-fit swap with existing mounting hardware\u003c\/li\u003e\n  \u003cli\u003eRecommended to replace coolant and follow proper system bleeding\u003c\/li\u003e\n  \u003cli\u003eCheck accessory belt and tensioner while pump is replaced\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support does Autoround provide?\u003c\/h3\u003e\n\u003cp\u003eAutoround backs this water pump with a multi-year after-sales window and customer service to help with fitment questions. Contact their support if you encounter fitment concerns or defects so they can advise or process warranty assistance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3 years after-sales support from Autoround\u003c\/li\u003e\n  \u003cli\u003eCustomer service via Amazon messages with typical 24-hour reply\u003c\/li\u003e\n  \u003cli\u003eClear interchange numbers to speed verification and returns\u003c\/li\u003e\n  \u003cli\u003eSupport includes technical fitment help prior to installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Autoround AW6169 is intended for professional mechanics and knowledgeable DIYers replacing a failed or leaking water pump on 3.6L Chrysler, Dodge, Jeep, Ram, or VW Routan vehicles. It’s appropriate when you need an OE-form replacement with included gaskets, durable sealed bearings, and manufacturer support—especially if you prefer to avoid sourcing separate seals or worry about proper fitment numbers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump include the gasket needed for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The AW6169 ships with the required gasket and seals for a direct replacement installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty or support does Autoround offer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Autoround provides a 3-year after-sales support period and customer service with typical 24-hour responses.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55171442409815,"sku":"B08SJBYK9V","price":86.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-aw6169-front-view.jpg?v=1790445453"},{"product_id":"autoround-front-cv-axle-for-honda-civic-2014-accord-2008-2017-direct-fit-3-year-qa","title":"Autoround Front CV Axle for Honda Civic 2014 \u0026 Accord 2008–2017 — Direct-Fit, 3-Year QA","description":"\u003cp\u003e\u003cstrong\u003eThe Autoround 664251 front CV axle is a direct-fit replacement designed to restore front-wheel drive reliability on compatible Honda and Acura models while meeting OE specifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your vehicle exhibits vibration, clicking during turns, or grease around the wheel hub, the front CV axle may be worn. Autoround’s 664251 unit is built to match original equipment dimensions, undergoes factory testing, and is offered with a three-year quality assurance to help ensure correct fit and dependable operation for the listed Honda and Acura years and models.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles does this CV axle fit?\u003c\/h3\u003e\n\u003cp\u003eThis axle is engineered for direct replacement on specific Honda and Acura models. It’s compatible with certain model years of the Accord, Civic, and Acura TSX; always verify part cross-references and your VIN before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: 2009–2014 Acura TSX, 2008–2017 Honda Accord, 2014 Honda Civic (confirm application charts).\u003c\/li\u003e\n  \u003cli\u003eReference numbers include: 44305TA0A50, 44305TL2E50, 44305T2AA50, 44305T2AA71, 44305TA0A00, 66-4251.\u003c\/li\u003e\n  \u003cli\u003eCheck your vehicle’s service manual or VIN parts lookup for final confirmation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Autoround ensure quality and fitment?\u003c\/h3\u003e\n\u003cp\u003eAutoround manufactures the 664251 CV axle to match original equipment tolerances and follows ISO-aligned quality practices. Each assembly is factory-tested for balance, spline integrity, and seal performance to reduce premature failure and installation issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt to OE dimensional and material standards under OEM guidance.\u003c\/li\u003e\n  \u003cli\u003eFactory testing for durability, joint smoothness, and seal integrity.\u003c\/li\u003e\n  \u003cli\u003eManufactured in Autoround’s own facility to control quality and pricing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the installation and maintenance details I should know?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard front axle replacement procedures: remove the wheel, disconnect the hub or steering knuckle as required, and slide the old axle out of the transaxle and hub. Use manufacturer torque specs and inspect related parts while installing the new axle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstallation requires basic to intermediate mechanical skills and common hand tools.\u003c\/li\u003e\n  \u003cli\u003eReplace any damaged boots, clamps, or fasteners encountered during service.\u003c\/li\u003e\n  \u003cli\u003eAlways torque axle nut and hub bolts to factory specifications and check for leaks after road testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and customer support come with this part?\u003c\/h3\u003e\n\u003cp\u003eAutoround backs the axle with a three-year quality assurance period and offers direct customer support for fitment questions or post-sale issues. If the part does not match or has defects, contact Autoround Customer Service to begin resolution.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree-year QA coverage for manufacturing defects.\u003c\/li\u003e\n  \u003cli\u003eDirect support for fitment confirmation before purchase.\u003c\/li\u003e\n  \u003cli\u003eReplacement or assistance options provided through Autoround’s customer service team.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This CV axle is intended for DIY mechanics, independent repair shops, and anyone restoring driveline reliability on compatible Honda Accord, Honda Civic, or Acura TSX models who needs an OE-dimension replacement at a competitive price. It’s particularly appropriate when the vehicle shows joint noise, visible grease leakage, or vibration tied to the front drivetrain, and for buyers who want factory-tested parts with documented reference numbers and a multi-year quality backing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this axle a direct replacement for my 2012 Honda Accord?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits many 2008–2017 Accord models, but verify with your VIN or the listed reference numbers before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty covers the Autoround 664251 CV axle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Autoround provides a three-year quality assurance covering manufacturing defects with customer support available.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55171445129559,"sku":"B0D1PKQDQY","price":121.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-front-cv-axle-full-assembly.jpg?v=1790445571"},{"product_id":"autoround-front-wheel-hub-assembly-for-cadillac-escalade-2wd-515097-oem-fit-abs-compatible","title":"Autoround Front Wheel Hub Assembly for Cadillac Escalade 2WD 515097 — OEM-fit, ABS Compatible","description":"\u003cp\u003e\u003cstrong\u003eAutoround 515097 is a direct-fit front wheel hub and bearing assembly engineered for 2WD Cadillac Escalade and compatible GM models to restore steering stability and ABS sensor function.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Escalade, Tahoe, Suburban or compatible GM pickup is showing wheel vibration, unusual noise from the front wheel area, or ABS warning indicators, replacing the front hub assembly with a properly matched unit can bring back factory-style performance. This Autoround hub is built to the same fitment envelope and mounting pattern as OEM units for model years listed below, making it a straightforward replacement for RWD vehicles equipped with 6-lug wheels and ABS.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles does this hub assembly fit?\u003c\/h3\u003e\n\u003cp\u003eThis part is specially made for 2-wheel-drive (rear-wheel drive) GM full-size SUVs and certain trucks from the late 2000s and early 2010s. Confirm your year, model and front-wheel drive status before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCadillac Escalade 2007–2014 (front, RWD) and Escalade ESV 2008–2014 (front, RWD).\u003c\/li\u003e\n  \u003cli\u003eChevrolet Avalanche 2007–2013; Silverado 1500 2007–2013 (new body style only); Suburban 1500 and Tahoe 2007–2014 (front, RWD).\u003c\/li\u003e\n  \u003cli\u003eGMC Sierra 1500 2007–2013 (new body style only); Yukon and Yukon XL 1500 2007–2014 (front, RWD).\u003c\/li\u003e\n  \u003cli\u003eDesigned for 6-lug wheels and vehicles with ABS sensors—check hub flange and offset for a match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this hub match the original part and installation expectations?\u003c\/h3\u003e\n\u003cp\u003eAutoround builds this assembly to match OEM interface dimensions including flange diameter and offset so mounting points and wheel fit-up align with factory tolerances. The unit replaces the factory numbers listed and is intended for direct swap installation with commonly available tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlange diameter: 7.07 in and flange offset: 1.96 in for proper wheel alignment.\u003c\/li\u003e\n  \u003cli\u003eReplaces part numbers: SP450303, 22841380, 515097, H515097, FW345, BR930693 for cross-reference.\u003c\/li\u003e\n  \u003cli\u003eIncludes ABS sensor compatibility—no extra sensor mods required when replacing like-for-like.\u003c\/li\u003e\n  \u003cli\u003eDesigned for bolt-in installation; typical mechanic or DIY with service manual guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality and warranty backing does Autoround provide?\u003c\/h3\u003e\n\u003cp\u003eThe assembly undergoes quality checks intended to meet or exceed OEM performance requirements for bearing life and structural reliability. Autoround supports the part with a multi-year quality assurance window and customer service pathways if questions or issues arise after purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured and tested to match expected OEM durability benchmarks.\u003c\/li\u003e\n  \u003cli\u003eThree-year quality assurance from Autoround for functional issues.\u003c\/li\u003e\n  \u003cli\u003eCustomer service available through Autoround channels for part support and fitment questions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during and after installation?\u003c\/h3\u003e\n\u003cp\u003eWhen installed correctly, the hub should eliminate front-end rumble, restore secure wheel mounting, and clear ABS-related faults caused by a failing hub sensor. Proper installation includes cleaning mating surfaces, torquing fasteners to factory specs, and verifying wheel bearing preload where required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstallation is straightforward for trained technicians and experienced DIYers following service manual steps.\u003c\/li\u003e\n  \u003cli\u003eVerify wheel torque and ABS wiring connections after mount; test-drive to confirm noise-free operation.\u003c\/li\u003e\n  \u003cli\u003eReplace hubs in axle pairs if wear is uneven to maintain balanced steering and braking response.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: mechanics, restoration shops, and owners of compatible Cadillac Escalade, Chevrolet or GMC RWD SUVs and trucks who need a reliable, direct-fit front hub\/bearing replacement. If your vehicle matches the listed years and drive configuration and you want an engineered hub that aligns with OEM dimensions and ABS function, this Autoround 515097 assembly is intended as a practical, long-term replacement option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hub assembly compatible with 4WD models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This Autoround 515097 hub is for 2WD (rear-wheel-drive) models only. Verify your vehicle’s drive type before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the assembly include ABS sensor functionality?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The hub is ABS-compatible and designed to work with the factory ABS wiring and sensors on listed vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55171457089879,"sku":"B084T57MPM","price":115.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-front-hub-assembly-front-view_c8cd464a-164b-4bcc-be7a-8d3e4f570353.jpg?v=1790446118"},{"product_id":"autoround-front-wheel-hub-assembly-for-dodge-ram-1500-2006-2008-5-lug-4-wheel-abs-pre-assembled-oem-fit","title":"Autoround Front Wheel Hub Assembly for Dodge Ram 1500 (2006-2008) 5-Lug 4-Wheel ABS — Pre-assembled, OEM-fit","description":"\u003cp\u003e\u003cstrong\u003eAutoround 515113 is a direct-fit front wheel hub assembly designed to replace the factory hub on 2006–2008 Dodge Ram 1500 models with 4-wheel ABS and 5-lug wheels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis premium hub assembly from Autoround provides a complete, pre-assembled unit engineered to meet the original fitment and performance requirements for Dodge Ram 1500 trucks built from 2006 through 2008 (vehicles with 4-wheel ABS, to 12\/07\/2008, 5-stud configuration). It replaces several OEM numbers including 515113, BR930284, BR930690, and HA500100, offering a ready-to-install solution that minimizes downtime and reduces the need to press bearings or match separate components.\u003c\/p\u003e\n\n\u003ch3\u003eWill this hub assembly fit my Dodge Ram 1500?\u003c\/h3\u003e\n\u003cp\u003eIf your truck is a 2006, 2007, or 2008 Dodge Ram 1500 with 4-wheel ABS and a 5-stud front hub, this Autoround 515113 hub assembly is built to be a direct replacement. Confirm VIN-specific compatibility and production cutoff (to 12\/07\/2008) before ordering to ensure correct fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: 2006–2008 Dodge Ram 1500 (4-Wheel ABS)\u003c\/li\u003e\n  \u003cli\u003eCab types supported: Crew Cab and Standard Cab pickups\u003c\/li\u003e\n  \u003cli\u003eHardware pattern: 5 lugs, bolt circle diameter 5.5 in\u003c\/li\u003e\n  \u003cli\u003eFlange specs: offset 1.84 in, flange diameter 7.2 in\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Autoround 515113 match OEM requirements?\u003c\/h3\u003e\n\u003cp\u003eAutoround designs this assembly to meet or exceed OEM performance standards through factory-tested bearings and precision-machined flanges. The unit arrives pre-assembled so tolerances, bearing preload, and ABS tone ring alignment are factory-controlled for consistent operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeets\/exceeds OEM performance testing criteria\u003c\/li\u003e\n  \u003cli\u003eIncludes ABS-compatible bearing and tone ring where applicable\u003c\/li\u003e\n  \u003cli\u003ePre-assembled to ensure correct bearing preload and alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the practical benefits of replacing the whole hub assembly?\u003c\/h3\u003e\n\u003cp\u003eSwapping the complete hub assembly saves time and reduces the risk of improper bearing installation or contamination versus rebuilding. A ready-to-install unit eliminates the need for specialized tools to press bearings, so you can get the vehicle back on the road faster with a reliable replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFaster installation — no bearing press required\u003c\/li\u003e\n  \u003cli\u003eLower risk of installation errors or premature wear\u003c\/li\u003e\n  \u003cli\u003eComplete part replacement includes flange, bearing, and seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and warranty?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic front-end service and torque specifications; follow factory procedures for wheel bearing torque and ABS sensor checks. Autoround also provides a 3-year after-sales service period — contact Autoround Customer Service via Amazon for support or questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick, precise assembly for easier DIY or shop installation\u003c\/li\u003e\n  \u003cli\u003eFollow factory torque specs and ABS diagnostics after install\u003c\/li\u003e\n  \u003cli\u003e3-year after-sales support from Autoround for part issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Autoround 515113 hub assembly is ideal for Dodge Ram 1500 owners and independent mechanics who need a reliable, OEM-style front hub replacement for 2006–2008 trucks with 4-wheel ABS and 5-lug wheels. It suits drivers wanting a full, ready-to-install unit to minimize labor, avoid pressing bearings, and restore proper front hub function with parts that match original fit and specification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hub assembly include the bearing and ABS tone ring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Autoround 515113 is a pre-assembled unit including the bearing and ABS-compatible tone ring where required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What vehicles is this hub compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible with 2006–2008 Dodge Ram 1500 trucks with 4-wheel ABS, 5-stud front hubs (to 12\/07\/2008).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55171459350871,"sku":"B089JY88L5","price":97.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-515113-front-hub-front-view.jpg?v=1790446202"},{"product_id":"autoround-front-wheel-hub-assembly-for-nissan-frontier-2005-2018-rwd-pre-pressed-sealed-bearing-abs-ready","title":"Autoround Front Wheel Hub Assembly for Nissan Frontier 2005–2018 RWD — Pre-Pressed Sealed Bearing, ABS-Ready","description":"\u003cp\u003e\u003cstrong\u003eThe Autoround 515064 front wheel hub assembly is a direct-fit replacement for 2WD Nissan Frontier (2005–2018) and compatible models, delivering OEM-style fit and sealed bearing performance for front-axle ABS applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis wheel hub assembly is engineered as a plug-and-play replacement for specific Nissan and related vehicles, designed to restore front-wheel stability, ABS sensor compatibility and wheel mounting integrity. Autoround supplies this assembly with a pre-pressed bearing, six-lug flange and precise flange geometry so professional mechanics or DIY enthusiasts can replace the front hub without needing separate bearing presses or modifications.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and drivetrains does this hub fit?\u003c\/h3\u003e\n\u003cp\u003eThe 515064 assembly is intended for 2WD (rear-wheel drive) front-axle applications across several Nissan platforms and a related Suzuki model. Confirm compatibility by matching year, model and the OEM part references before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Nissan Frontier model years 2005–2018 (2WD only).\u003c\/li\u003e\n  \u003cli\u003eCompatible with Nissan Pathfinder 2005–2012 and Xterra 2005–2015 (2WD variants).\u003c\/li\u003e\n  \u003cli\u003eAlso fits 2009–2012 Suzuki Equator front 2WD setups.\u003c\/li\u003e\n  \u003cli\u003eReplaces part numbers 515064, SP450702, BR930659, and 40202-EA000.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Autoround hub match OEM performance and ABS systems?\u003c\/h3\u003e\n\u003cp\u003eThis assembly is manufactured and tested to meet or exceed common OEM tolerances for bearing preload, flange runout and ABS sensor clearance. The hub is supplied with a sealed bearing and ABS-compatible tone ring geometry so the vehicle's anti-lock braking system and wheel-speed sensors function as intended once installed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-pressed sealed bearing to maintain lubrication and reduce contaminant intrusion.\u003c\/li\u003e\n  \u003cli\u003eABS-ready design preserves wheel-speed sensor readings and braking stability.\u003c\/li\u003e\n  \u003cli\u003eFlange offset 1.81 in and flange diameter 5.51 in for correct wheel alignment.\u003c\/li\u003e\n  \u003cli\u003eBolt circle diameter 4.5 in and six-lug pattern match factory wheels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for technicians and competent DIYers: remove the old hub, transfer any reusable hardware, and install the Autoround assembly using factory torque specs. Because the bearing comes pre-assembled and sealed, there’s no separate bearing packing or pressing required, which shortens labor time and reduces special-tool needs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for quick swap-in replacement with standard service tools.\u003c\/li\u003e\n  \u003cli\u003eEliminates need for bearing press in most cases thanks to pre-assembled design.\u003c\/li\u003e\n  \u003cli\u003eUse factory torque values and check ABS connector\/sensor clearance after install.\u003c\/li\u003e\n  \u003cli\u003eInspect adjacent components—brake pads, rotors, and wheel studs—while replacing the hub.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality assurances and customer support does Autoround provide?\u003c\/h3\u003e\n\u003cp\u003eAutoround states the hub assemblies undergo quality testing to meet or exceed OEM performance expectations and includes a multi-year QA period. If questions arise before or after installation, company customer service is available through the retailer to assist with fitment or warranty concerns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuality-tested to match OEM performance standards.\u003c\/li\u003e\n  \u003cli\u003eThree-year QA support offered by Autoround for peace of mind.\u003c\/li\u003e\n  \u003cli\u003eCustomer assistance available through the seller channel for fitment or returns.\u003c\/li\u003e\n  \u003cli\u003ePart cross-references provided to verify correct replacement part numbers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Autoround 515064 front wheel hub assembly is intended for owners and mechanics working on 2WD Nissan Frontier, Pathfinder, Xterra and Suzuki Equator vehicles within the listed years who need a reliable, sealed replacement hub that preserves ABS function and wheel mounting geometry. Choose this part when you want a direct-fit, pre-pressed bearing hub to streamline service time and restore proper front-wheel operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hub compatible with 4WD models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The Autoround 515064 is for 2WD front-axle applications only; it does not fit 4WD models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the assembly include a pre-pressed bearing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The unit arrives with a pre-pressed, sealed bearing ready for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55171494936919,"sku":"B076F29K8Q","price":89.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-515064-front-hub-assembly-front-view.jpg?v=1790446888"},{"product_id":"autoround-front-wheel-hub-assembly-for-chrysler-200-2011-2014-513263-oe-fit-with-integrated-abs-encoder","title":"Autoround Front Wheel Hub Assembly for Chrysler 200 2011-2014 — 513263 OE-fit with Integrated ABS Encoder","description":"\u003cp\u003e\u003cstrong\u003eAutoround 513263 is a direct-replacement front wheel hub assembly engineered to restore precise wheel rotation and secure front-end handling on compatible Chrysler and Dodge models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle shows steering vibration, wheel noise, or uneven handling, the hub assembly is often the root cause. The Autoround 513263 hub assembly replaces the worn bearing and hub flange as a complete unit, matching factory mounting points and electrical encoder type for ABS-equipped systems. It’s built to OE-equivalent dimensions so installation is straightforward and alignment of the brake rotor and wheel studs returns to factory geometry.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hub assembly fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe 513263 hub is engineered for front-left (driver) or front-right (passenger) positions on specific Chrysler and Dodge models. Fitment covers Chrysler 200 model years 2011–2014 and several earlier Sebring, Avenger, and Caliber years; confirm compatibility with your exact Year\/Make\/Model before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrimary fit: Chrysler 200 (2011–2014) front\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Chrysler Sebring (2007–2010 front, 4‑Wheel ABS), Dodge Avenger (2008–2014 front), Dodge Caliber (2009 front)\u003c\/li\u003e\n  \u003cli\u003eConfirm fit using seller fitment tool or vehicle VIN\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications I should know?\u003c\/h3\u003e\n\u003cp\u003eKnowing the hub’s flange size, bolt pattern, and ABS encoder type helps ensure compatibility with your wheel, rotor, and anti-lock braking system. Autoround supplies exact measurements so installers can verify a like-for-like replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlange offset: 1.91 inches\u003c\/li\u003e\n  \u003cli\u003eFlange diameter: 5.56 inches\u003c\/li\u003e\n  \u003cli\u003eBolt circle diameter: 4.5 inches with 5 bolt studs\u003c\/li\u003e\n  \u003cli\u003eABS encoder type: integrated electrical encoder\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance differences can I expect after replacement?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn hub assembly eliminates bearing play that causes vibration, noise, and imprecise steering input. The Autoround unit supports vehicle weight and preserves smooth wheel rotation, improving ride comfort and braking confidence when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces steering wheel wobble and vibration\u003c\/li\u003e\n  \u003cli\u003eEliminates grinding or growling from the front wheel area\u003c\/li\u003e\n  \u003cli\u003eRestores correct wheel alignment relation to brake rotor and caliper\u003c\/li\u003e\n  \u003cli\u003eMaintains ABS signal integrity via the encoder-type sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Autoround 513263 front hub assembly is aimed at DIY mechanics, independent technicians, and fleet service shops replacing a failing front hub on compatible Chrysler 200, Sebring, Avenger, or Caliber models. Choose this part if you need an OE-dimension replacement with an integrated ABS encoder, clear fitment specifications, and seller-backed support. If you’re uncertain about compatibility, use the provided Year\/Make\/Model fitment tool or contact Autoround Customer Service for confirmation before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this hub assembly work with my 2012 Chrysler 200?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Autoround 513263 is specified for Chrysler 200 model years 2011–2014. Verify exact fit using your VIN or the product fitment tool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this part include an ABS sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The unit includes an integrated ABS encoder-style connector to maintain the factory anti-lock brake signal.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autoround","offers":[{"title":"Default Title","offer_id":55171513516375,"sku":"B083BCQ6HX","price":86.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autoround-513263-front-hub-assembly-front-view.jpg?v=1790447370"}],"url":"https:\/\/britishgarage.co.uk\/collections\/autoround.oembed","provider":"British Garage","version":"1.0","type":"link"}