{"title":"Bando USA","description":"\u003cp\u003eBrowse 28 Bando USA products at British Garage, including belts, hoses \u0026amp; pulleys. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked UK delivery on every order and 30-day returns.\u003c\/p\u003e","products":[{"product_id":"bando-usa-serpentine-belt-7pk1700-7-rib-1700mm-oem-quality-epdm-for-acura-honda-nissan","title":"Bando USA Serpentine Belt 7PK1700 7-Rib 1700mm OEM-Quality EPDM for Acura\/Honda\/Nissan","description":"\u003cp\u003e\u003cstrong\u003eThe Bando USA 7PK1700 is an OEM-grade serpentine belt with seven ribs and a 1700 mm (66.9 in) length engineered for heat resistance and long service life.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBando has produced automotive rubber components for over a century and supplies belts to major vehicle manufacturers worldwide. The 7PK1700 serpentine belt uses EPDM compound and precision two-stage grinding to match OEM rib profiles and tensioner fit, delivering consistent performance for drive systems in a wide range of domestic and import cars and light trucks.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this belt match OEM fit and performance?\u003c\/h3\u003e\n\u003cp\u003eThe 7PK1700 is manufactured to the same dimensional and material standards used by original equipment suppliers. Bando grinds each belt twice to achieve the exact rib geometry needed for modern accessory drives, helping the belt seat correctly on pulleys and tensioners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision two-stage rib grinding for accurate profile and smooth engagement\u003c\/li\u003e\n  \u003cli\u003eEPDM rubber compound for higher heat tolerance and longer wear life\u003c\/li\u003e\n  \u003cli\u003eStrong tensile cords to resist elongation under high loads\u003c\/li\u003e\n  \u003cli\u003eSingle premium standard across OEM and aftermarket lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat applications and vehicles use the 7PK1700 belt?\u003c\/h3\u003e\n\u003cp\u003eThis belt fits numerous models from Acura, Honda and Nissan across several model years. It is intended for accessory drive systems that require a 7-rib belt at 1700 mm length, covering many sedans and light trucks where that specification is stipulated.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAcura ILX 2013–2015 and Acura RSX 2005–2006\u003c\/li\u003e\n  \u003cli\u003eHonda Civic 2012–2015\u003c\/li\u003e\n  \u003cli\u003eNissan Altima 2007–2013, Maxima 2009–2014, Murano 2009–2014\u003c\/li\u003e\n  \u003cli\u003eDesigned for high-performance and everyday engines that demand stable accessory drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and construction features should I expect?\u003c\/h3\u003e\n\u003cp\u003eBando builds this belt with wear-resistant compounds and reinforced tensile cords so it resists cracking, glazing and stretch. The ground ribs and synthetic rubber formulation reduce noise and vibration for smoother operation over the belt’s service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEPDM compound formulated for heat and ozone resistance\u003c\/li\u003e\n  \u003cli\u003eHigh-strength tensile cords carry horsepower loads without permanent elongation\u003c\/li\u003e\n  \u003cli\u003eGround rubber ribs for improved wear characteristics and quiet running\u003c\/li\u003e\n  \u003cli\u003eManufactured under consistent global standards from Bando’s production network\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I replace and inspect this serpentine belt?\u003c\/h3\u003e\n\u003cp\u003eReplacement follows standard accessory belt procedures: relieve tensioner, remove the old belt, route the new belt according to the vehicle diagram and re-tension. While replacing, inspect pulleys, tensioner, and idlers for wear to avoid premature belt failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRelease tensioner and remove old belt before fitting replacement\u003c\/li\u003e\n  \u003cli\u003eConfirm belt routing against engine diagram and seat ribs fully on pulleys\u003c\/li\u003e\n  \u003cli\u003eCheck tensioner, idler bearings, and pulleys for smooth rotation and play\u003c\/li\u003e\n  \u003cli\u003eRun engine briefly and re-check alignment and noise after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians, DIY mechanics and fleet managers who need an OEM-quality serpentine belt that matches factory dimensions and materials. The Bando USA 7PK1700 is suited to owners of the listed Acura, Honda and Nissan models, as well as anyone seeking a robust aftermarket belt made to original-equipment standards for reliable accessory-drive performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Bando 7PK1700 the exact size for my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your vehicle’s belt specification—7 ribs and 1700 mm (66.9 in). It fits listed Acura, Honda, and Nissan models; verify against your manual or OEM part number.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long will this serpentine belt typically last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Service life varies by use and conditions, but EPDM construction and reinforced cords provide longer wear versus older rubber belts; inspect annually or per manufacturer intervals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55161741017431,"sku":"B0027A3APS","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-usa-7pk1700-front-packaging.jpg?v=1790331976"},{"product_id":"bando-usa-serpentine-belt-7pk1715-7-rib-1715-mm-oem-quality-epdm-reinforced-cords","title":"Bando USA serpentine belt 7PK1715 — 7‑rib 1715 mm OEM-quality EPDM, reinforced cords","description":"\u003cp\u003e\u003cstrong\u003eThe ban.do 7PK1715 is an OEM-grade 7-rib serpentine belt (1715 mm \/ 67.5 in) engineered from heat‑resistant EPDM rubber to meet original equipment performance and longevity.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt by Bando USA — a global belt manufacturer with more than a century of rubber expertise and broad OEM experience — this 7PK1715 belt is made to the same standards used by major automakers. It is precision ground to achieve the correct rib profile, reinforced with strong tensile cords to resist stretching under load, and formulated to offer wear resistance and extended service life. The part fits a range of Acura and Honda models and is offered as the exact OEM-quality replacement in aftermarket packaging.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the ban.do 7PK1715 differ from cheaper molded belts?\u003c\/h3\u003e\n\u003cp\u003eThe 7PK1715 is double-ground to match OEM rib geometry precisely, which promotes quieter operation and more consistent belt seating on pulleys. Molded belts often leave subtle profile variances that can accelerate wear or cause squeal. Bando’s EPDM compound is selected for higher heat tolerance and longer life than many bargain alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision two-pass grinding for accurate rib profile\u003c\/li\u003e\n  \u003cli\u003eEPDM rubber compound for heat and ozone resistance\u003c\/li\u003e\n  \u003cli\u003eHigh-strength tensile cords reduce stretch under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this belt fit my vehicle and what models are covered?\u003c\/h3\u003e\n\u003cp\u003eThe 7PK1715 is specified for several Acura and Honda vehicles spanning model years; always verify fitment with your VIN or vehicle manual before purchase. Typical compatible applications include some RSX, TSX, Civic and CR‑V model years listed by the manufacturer. If in doubt, compare the old belt length and rib count to ensure a match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e7 ribs by 1715 mm (67.5 inches) belt length\u003c\/li\u003e\n  \u003cli\u003eCommon fits: Acura RSX (2002–2004), Acura TSX (2009–2014)\u003c\/li\u003e\n  \u003cli\u003eHonda Civic (2016–2021) and CR‑V (2017–2021) reported coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and durability highlights I should expect?\u003c\/h3\u003e\n\u003cp\u003eConstruction focuses on matching OEM specification: a durable EPDM rubber compound, ground ribs for precise pulley contact, and reinforced tensile cords designed to transmit horsepower without elongation. These design choices reduce slippage, maintain proper accessory drive timing, and extend replacement intervals when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEPDM rubber for long-term wear and thermal stability\u003c\/li\u003e\n  \u003cli\u003eGround ribs for consistent pulley engagement and reduced noise\u003c\/li\u003e\n  \u003cli\u003eReinforced cords to resist stretching under high loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain an OEM serpentine belt for best life?\u003c\/h3\u003e\n\u003cp\u003eProper installation and routine checks extend belt life: inspect pulleys, tensioner, and idlers for wear, replace any damaged components, and use a belt tension gauge or the vehicle’s tensioner to set correct tension. Avoid oil or coolant contamination on the belt surface and replace the belt at manufacturer-recommended intervals or sooner if cracking or glazing appears.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck pulleys, tensioner and idlers before installing the new belt\u003c\/li\u003e\n  \u003cli\u003eSet correct tension per vehicle specs or use automatic tensioner\u003c\/li\u003e\n  \u003cli\u003eInspect regularly for cracks, glazing, or contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The ban.do 7PK1715 is aimed at vehicle owners, independent mechanics, and fleet technicians who need a direct OEM-quality serpentine belt replacement for compatible Acura and Honda models. It’s a practical choice for anyone prioritizing manufacturer-level fit and durability, quieter operation, and parts built to the same standards automakers use on new vehicles.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the ban.do 7PK1715 the same as the OEM belt?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it is manufactured to OEM specifications and uses the same EPDM compound and precision grinding as factory belts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm this belt fits my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Match the belt’s 7 ribs and 1715 mm length to your existing belt or check vehicle fitment lists and VIN-based parts lookup.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55161936249175,"sku":"B000Q03IS0","price":29.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-7pk1715-front-packaging.jpg?v=1790333835"},{"product_id":"bando-usa-7-rib-serpentine-belt-7pk1905-1905-mm-75-in-oem-grade-epdm-high-strength-cords","title":"Bando USA 7-rib Serpentine Belt 7PK1905 (1905 mm \/ 75 in) — OEM-grade EPDM, high-strength cords","description":"\u003cp\u003e\u003cstrong\u003eThe Bando USA 7PK1905 is an OEM-grade 7-rib serpentine belt (1905 mm \/ 75 in) engineered from EPDM rubber for heat resistance and long service life.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBando has produced automotive belts for over a century and supplies many original equipment manufacturers worldwide. The 7PK1905 serpentine belt is built to the same precise standards used for OEM parts: twice-ground ribs for exact profile matching, high-strength tensile cords to resist stretching, and EPDM rubber compound for improved temperature tolerance. This belt replaces or fits specific Toyota, Scion and Pontiac models and is made by one of the world’s largest drive-belt manufacturers, ensuring consistent fit and performance for routine maintenance or replacement projects.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 7PK1905 differ from cheaper aftermarket belts?\u003c\/h3\u003e\n\u003cp\u003eThe 7PK1905 is produced using OEM-grade processes rather than simple molding, so the rib profile is precision-ground twice to match factory specifications. That accurate profile reduces slippage and improves accessory drive alignment compared with belts made purely from molded ribs. Materials also matter: Bando uses EPDM rubber and reinforced tensile cords that resist heat and stretching better than lower-cost blends.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwice-ground ribs for precise OEM rib geometry\u003c\/li\u003e\n  \u003cli\u003eEPDM compound for higher heat and ozone resistance\u003c\/li\u003e\n  \u003cli\u003eStrong tensile cords to carry horsepower without elongation\u003c\/li\u003e\n  \u003cli\u003eManufactured to consistent global standards used for OEM supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and fitments does this belt support?\u003c\/h3\u003e\n\u003cp\u003eThis 7-rib 1905 mm (75 in) belt covers a range of Toyota, Scion and Pontiac applications. It’s listed to fit several model years of Camry, Corolla, Matrix, RAV4, Scion xB and Pontiac Vibe. Always verify the belt length and rib count against your vehicle’s parts diagram or original belt marking before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePontiac Vibe: 2009–2010\u003c\/li\u003e\n  \u003cli\u003eScion xB: 2012–2015\u003c\/li\u003e\n  \u003cli\u003eToyota Camry: 2007–2009\u003c\/li\u003e\n  \u003cli\u003eToyota Corolla: 2009–2010; Matrix: 2009–2013; RAV4: 2006–2008\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the technical features and benefits of this serpentine belt?\u003c\/h3\u003e\n\u003cp\u003eThe belt combines a durable EPDM rubber compound with ground ribs and robust tensile cords to provide long wear life and stable operation. These design choices reduce crack formation, resist thermal aging, and help maintain proper accessory drive tension and alignment over time. The belt’s construction is suitable for the varied loads found in modern engines, from air-conditioning compressors to alternators and power steering pumps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e7 ribs × 1905 mm (75 in) profile for correct pulley engagement\u003c\/li\u003e\n  \u003cli\u003eHigh-strength synthetic rubber ribs for wear resistance\u003c\/li\u003e\n  \u003cli\u003eTensile cords engineered to carry high horsepower without stretching\u003c\/li\u003e\n  \u003cli\u003eManufactured to OEM-quality standards for consistent replacement fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this belt for? The Bando USA 7PK1905 is aimed at vehicle owners, independent mechanics and fleet managers who want an OEM-quality replacement for select Toyota, Scion and Pontiac models. It’s a good choice when you need a reliable, long-lasting belt built to factory tolerances—especially for vehicles that run accessories under frequent load or in hotter climates. If you need a precise-fit replacement that mirrors factory construction and materials, this Bando serpentine belt is engineered for that purpose.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Bando 7PK1905 an OEM-equivalent belt?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 7PK1905 is manufactured to OEM-grade standards with twice-ground ribs and EPDM compound for equivalent fit and durability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm this belt fits my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your current belt’s rib count and length (7 ribs, 1905 mm\/75 in) or compare part numbers in your vehicle’s service manual before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55162769965399,"sku":"B00E0EUQYW","price":34.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-usa-7pk1905-front-packaging.jpg?v=1790338730"},{"product_id":"bando-usa-serpentine-belt-7pk2480-oem-quality-epdm-quiet-operation-metric-fit","title":"Bando USA serpentine belt 7PK2480 — OEM-quality EPDM, quiet operation, metric fit","description":"\u003cp\u003e\u003cstrong\u003eThe ban.do 7PK2480 is an OEM-quality serpentine (accessory drive) belt engineered for long life, quiet operation, and precise fit across many domestic and import vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement belt combines Bando USA’s original-equipment know-how with advanced materials to deliver dependable accessory drive performance. Built with high-strength tensile cords, a soft noise-reducing backing and ground rubber ribs, the 7PK2480 is designed to resist heat, oil, and wear while maintaining correct rib profile and tension. It’s manufactured with metric precision so the fit and tracking closely match factory specifications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this belt resist heat, oil, and wear?\u003c\/h3\u003e\n\u003cp\u003eThe 7PK2480 uses an EPDM rubber compound and reinforced rib construction created to tolerate high under-hood temperatures and incidental oil exposure. Ground rubber ribs are formulated from a high-strength synthetic elastomer to slow wear and preserve grip under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEPDM compounding for elevated temperature resistance and longevity\u003c\/li\u003e\n  \u003cli\u003eGround rubber ribs for improved abrasion resistance\u003c\/li\u003e\n  \u003cli\u003eOil- and heat-resistant backing to prevent premature breakdown\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this belt fit my vehicle and perform like the original?\u003c\/h3\u003e\n\u003cp\u003eManufactured to meet or exceed OE specifications, the 7PK2480 offers precise metric sizing and machine-cut ribs for an accurate fit and consistent tracking. The bidirectional cord construction helps prevent rib wandering so the belt runs true on pulleys designed for factory belts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact metric sizing for reliable OE-style fit\u003c\/li\u003e\n  \u003cli\u003eMachine-cut ribs for consistent contact with pulley grooves\u003c\/li\u003e\n  \u003cli\u003eBidirectional tensile cords to minimize tracking issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does it stay quiet and maintain grip under load?\u003c\/h3\u003e\n\u003cp\u003eBan.do incorporated a proprietary \"Run Quiet\" approach that balances grip and slip resistance while using a softer backing compound to damp vibration and noise. Strong tensile cords transmit engine accessory loads without excessive stretch, keeping tension stable and pulleys synchronized.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRun Quiet design for reduced belt whine and vibration\u003c\/li\u003e\n  \u003cli\u003eSoft backing compound to absorb noise and improve pulley contact\u003c\/li\u003e\n  \u003cli\u003eHigh-tensile cords for stable tension under horsepower loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich makes and models are covered by this part number?\u003c\/h3\u003e\n\u003cp\u003eThe 7PK2480 covers a broad range of domestic platforms and selected imports, matching common factory belt applications from the early-to-mid 1990s. Always confirm compatibility with your vehicle’s year, make and engine to ensure correct fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Dodge D150 (1993), D250 (1993), Dakota (1993–1995)\u003c\/li\u003e\n  \u003cli\u003eFits Ram 1500 (1994–1997), Ram 2500 (1994–1996), Ram 3500 (1995–1996)\u003c\/li\u003e\n  \u003cli\u003eAlso fits Ramcharger (1993), W-series trucks (1993), Lincoln Town Car (1991–1992), Mercury Grand Marquis (1992)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this belt for? The ban.do 7PK2480 is ideal for DIY mechanics, professional shops, and fleet managers seeking an OEM-quality replacement that prioritizes durability, quiet operation, and precise fit. If you need a serpentine belt that resists heat, oil, and wear while maintaining factory-style performance for compatible Dodge, Ram, Lincoln, and Mercury vehicles, this part delivers a cost-effective, long-lasting option. Verify your vehicle’s belt size and part number before purchase to ensure correct application.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 7PK2480 compatible with my 1995 Dodge Dakota?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the ban.do 7PK2480 lists Dakota 1993–1995 among compatible models; verify engine and belt routing to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this belt reduce noise compared with standard replacements?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — proprietary Run Quiet technology plus a soft backing reduce vibration and audible belt noise during operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55162996785495,"sku":"B000CAYTOG","price":34.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-7pk2480-front-packaging.jpg?v=1790340525"},{"product_id":"bando-usa-serpentine-belt-7pk2090-for-toyota-lexus-oem-quality-quiet-durable-fit","title":"Bando USA serpentine belt 7PK2090 for Toyota \u0026 Lexus — OEM-quality, quiet durable fit","description":"\u003cstrong\u003eThe ban.do 7PK2090 is an OEM-quality serpentine (accessory drive) belt from Bando USA engineered for durable, quiet operation across many Toyota and Lexus models.\u003c\/strong\u003e\n\n\u003cp\u003eBuilt using Bando's OEM heritage, this 7PK2090 replacement belt blends high-strength tensile cords, EPDM rubber compounds, and proprietary noise-reduction technology to match or exceed original equipment performance. It's manufactured for precise metric sizing and machine-cut ribs so the belt fits as intended and resists slipping, oil, heat, and wear for longer service life.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will the ban.do 7PK2090 fit?\u003c\/h3\u003e\n\u003cp\u003eThis belt covers a range of domestic and import applications, with specific compatibility for multiple Toyota and Lexus model years. Verify fit by comparing part numbers or consulting vehicle fitment charts before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Lexus ES350 (2007–2012) and RX350 (2007–2009)\u003c\/li\u003e\n  \u003cli\u003eFits Toyota Avalon (2005–2012), Camry (2007–2011), and Sienna (2007–2010)\u003c\/li\u003e\n  \u003cli\u003eDesigned to match OE metric sizing and machine-cut ribs for correct alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this belt resist wear and stretching?\u003c\/h3\u003e\n\u003cp\u003eDurability comes from a combination of strong tensile cords and high-performance rubber compounds. Those components handle horsepower loads and protect the rib surface against abrasion and oil-induced degradation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-tensile cords prevent elongation under load\u003c\/li\u003e\n  \u003cli\u003eGround rubber ribs use synthetic rubber for enhanced wear resistance\u003c\/li\u003e\n  \u003cli\u003eEPDM compounding improves heat and oil resistance for longer life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features reduce noise and slipping?\u003c\/h3\u003e\n\u003cp\u003eBando applies a proprietary “Run Quiet” design and soft compound backing to minimize belt noise and improve grip on pulleys. Precise manufacturing tolerances and bidirectional cords also help the belt track consistently with less vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProprietary noise-reduction technology for quieter operation\u003c\/li\u003e\n  \u003cli\u003eSoft backing compound reduces squeal and pulley chatter\u003c\/li\u003e\n  \u003cli\u003eBidirectional cord construction eliminates tracking issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose this Bando USA replacement over aftermarket alternatives?\u003c\/h3\u003e\n\u003cp\u003eBando has long supplied OEM manufacturers and earned quality recognition across the automotive industry. The 7PK2090 leverages that experience, offering OE-level materials and precise production that many generic belts do not match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAward-winning OEM supplier with extensive manufacturer approvals\u003c\/li\u003e\n  \u003cli\u003eManufactured to exceed OE specifications for fit and performance\u003c\/li\u003e\n  \u003cli\u003eDesigned for resistance to oil, heat, and high horsepower loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and technicians seeking an OE-equivalent serpentine belt for compatible Toyota and Lexus models who want a factory-like fit, quieter operation, and extended service life. Ideal for routine maintenance, scheduled belt replacement, or when you need a reliable, OEM-quality replacement without guessing about compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the ban.do 7PK2090 an original equipment (OE) part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s an OEM-quality replacement built to meet or exceed OE specifications, made by Bando USA, a long-time supplier to major manufacturers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How does this belt handle oil and heat exposure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt uses EPDM compounds and oil-resistant backing that increase durability against heat and oil compared with standard rubber belts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55163040498007,"sku":"B000Q073CM","price":32.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-7pk2090-front-packaging.jpg?v=1790340889"},{"product_id":"bando-usa-serpentine-belt-7-rib-1320-mm-52-in-7pk1320-oem-quality-epdm-with-reinforced-tensile-cords","title":"Bando USA serpentine belt 7-rib 1320 mm (52 in) 7PK1320 — OEM-quality EPDM with reinforced tensile cords","description":"\u003cp\u003e\u003cstrong\u003eThe Bando USA 7PK1320 is an OEM-quality 7-rib serpentine belt, 1320 mm (52 inches) long, built from heat-resistant EPDM rubber and precision-ground to meet factory fit and durability standards.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned by a manufacturer with over a century of rubber experience and a global footprint, this belt matches the same specifications used by many vehicle makers. Bando supplies original equipment for a significant portion of top-selling cars and produces belts under a single premium standard for both OEM and aftermarket channels. The 7PK1320 combines reinforced tensile cords and precision rib geometry to transmit power cleanly to alternators, power steering pumps, A\/C compressors and other accessory drives.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 7PK1320 deliver reliable fit and performance?\u003c\/h3\u003e\n\u003cp\u003eThe belt is precision-ground twice to replicate the rib profile required by vehicle manufacturers, ensuring accurate engagement with pulley grooves. That close tolerance reduces slippage and noise while improving accessory drive efficiency over belts molded without post-processing. Materials and construction aim for a consistent fit across replacement and factory-installed parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact 7-rib profile at 1320 mm (52 in) length for direct-fit replacements\u003c\/li\u003e\n  \u003cli\u003eDual grinding process for accurate rib geometry\u003c\/li\u003e\n  \u003cli\u003eReinforced tensile cords to resist elongation under load\u003c\/li\u003e\n  \u003cli\u003eManufactured to the same standards used for OEM supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and engineering help this belt resist wear and heat?\u003c\/h3\u003e\n\u003cp\u003eThe 7PK1320 uses EPDM synthetic rubber compound, which tolerates higher operating temperatures and resists ozone and environmental aging better than older rubber types. Ground ribs are formulated for abrasion resistance so the belt maintains profile and grip over time, extending service life under normal operating conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEPDM rubber for improved heat and ozone resistance\u003c\/li\u003e\n  \u003cli\u003eHigh-strength synthetic rubber rib compound for wear resistance\u003c\/li\u003e\n  \u003cli\u003eTensile cords engineered to carry horsepower loads without stretching\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and applications is this belt suited for?\u003c\/h3\u003e\n\u003cp\u003eThe 7-rib, 1320 mm length is commonly used on a wide range of domestic, import and light-truck accessory drive systems. Bando products follow manufacturer specifications, so this belt is intended for direct replacement where 7PK1320 is the specified belt size. Always verify belt length and rib count against your vehicle's service manual or existing belt part number before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with vehicles requiring a 7-rib, 1320 mm (52 in) belt\u003c\/li\u003e\n  \u003cli\u003eDesigned for alternator, power steering, A\/C and other accessory drives\u003c\/li\u003e\n  \u003cli\u003eSuitable for domestic, import, and light truck applications that list 7PK1320\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Bando’s manufacturing background affect product quality?\u003c\/h3\u003e\n\u003cp\u003eBando operates multiple global plants and supplies both OEM and aftermarket with the same production standards, reflecting decades of automotive belt experience. Their position as a major belt maker and long-term OEM partner means consistent material selection, production processes, and quality checks that align with factory expectations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOver 100 years in rubber manufacturing and automotive supply\u003c\/li\u003e\n  \u003cli\u003eGlobal production network with standardized manufacturing criteria\u003c\/li\u003e\n  \u003cli\u003eBelts produced to the same specifications sold to vehicle manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Bando USA 7PK1320 is aimed at mechanics, DIYers and fleet maintainers who need a direct-fit, OEM-grade serpentine belt for vehicles calling for a 7-rib 1320 mm \/ 52 in belt. Choose this belt when you want a manufacturer-backed replacement made from EPDM rubber with precision ground ribs and reinforced cords to match factory expectations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 7PK1320 the same as an OEM belt?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Bando manufactures this belt to OEM specifications and supplies the same standards used by vehicle manufacturers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material is the 7PK1320 made from?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt is produced from EPDM synthetic rubber with reinforced tensile cords for heat and wear resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55163281506647,"sku":"B002EC3TGY","price":32.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-usa-7pk1320-front-packaging.jpg?v=1790342977"},{"product_id":"bando-usa-serpentine-belt-6pk2005-6-rib-2005mm-79-epdm-oem-quality-durability","title":"Bando USA serpentine belt 6PK2005 6-rib 2005mm (79\") — EPDM, OEM-quality durability","description":"\u003cp\u003e\u003cstrong\u003eThe Bando USA 6PK2005 is a 6-rib, 2005 mm (79\") OEM-quality serpentine belt built from EPDM rubber and precision-ground to meet factory specifications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned and manufactured by Bando, a global belt maker with over a century of experience, this serpentine belt is engineered for reliable accessory drive performance across domestic, import and light-truck applications. Bando supplies OEM components to many major automakers and produces drive belts to a single high standard — the same exacting production criteria used for factory replacement parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow is the 6PK2005 constructed to last longer?\u003c\/h3\u003e\n\u003cp\u003eThis belt uses high-strength tensile cords and EPDM rubber compounds to resist stretching, heat, and wear that shorten belt life. Bando also precision-grinds the rib profile twice to match the exact dimensions expected by OEM pulleys, improving contact and reducing slippage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6 ribs with a 2005 mm (79\") length for correct pulley engagement\u003c\/li\u003e\n  \u003cli\u003eEPDM rubber compound for higher heat resistance and durability\u003c\/li\u003e\n  \u003cli\u003eStrong tensile cords that carry horsepower loads without elongating\u003c\/li\u003e\n  \u003cli\u003eDouble-precision rib grinding to meet OEM rib profile tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits can I expect after installation?\u003c\/h3\u003e\n\u003cp\u003eWhen fitted properly, the 6PK2005 provides smooth accessory drive operation and consistent belt tension, helping maintain alternator, A\/C, and power steering function. Its engineered rubber formulation and cord reinforcement reduce premature wear and noise compared with lower-grade belts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStable belt tension for steady accessory operation\u003c\/li\u003e\n  \u003cli\u003eReduced noise and vibration due to accurate rib profile\u003c\/li\u003e\n  \u003cli\u003eLonger service intervals from improved wear resistance\u003c\/li\u003e\n  \u003cli\u003eCompatible with a wide range of domestic and import pulley systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Bando’s manufacturing background affect belt quality?\u003c\/h3\u003e\n\u003cp\u003eBando has produced rubber products for over 100 years and operates multiple plants worldwide, manufacturing both OEM and aftermarket belts to the same premium standard. Their long-term partnerships with major automakers mean production methods, materials, and inspection processes are tuned to factory-level expectations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOver 19 production facilities providing global manufacturing capacity\u003c\/li\u003e\n  \u003cli\u003eSupplier credentials with leading automakers inform quality control\u003c\/li\u003e\n  \u003cli\u003eUniform premium production standards across OEM and aftermarket belts\u003c\/li\u003e\n  \u003cli\u003eHigh-quality rubber compounding and cord technology used in every belt\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat specifications should I confirm before ordering?\u003c\/h3\u003e\n\u003cp\u003eVerify that your vehicle requires a 6-rib belt with a 2005 mm (79\") circumference and that the belt profile matches OEM routing. Confirm fitment with your vehicle’s make, model, and engine variant to avoid mis-sizing or improper tensioning.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm 6 ribs and 2005 mm (79\") length match vehicle requirements\u003c\/li\u003e\n  \u003cli\u003eCheck manufacturer part cross-reference or belt routing diagram\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys and tensioner condition before installing a new belt\u003c\/li\u003e\n  \u003cli\u003eUse a torque or tension gauge where recommended for proper fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Bando USA 6PK2005 is aimed at technicians and vehicle owners seeking a direct-fit, OEM-grade replacement serpentine belt for light trucks, passenger cars, and import models that call for a 6-rib 2005 mm belt. It suits anyone who prioritizes factory-level specifications, improved wear life, and consistent accessory drive performance over economy-grade alternatives.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 6PK2005 an OEM-equivalent belt?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Bando manufactures the 6PK2005 to OEM tolerances with double precision grinding and EPDM compound for factory-level fit and performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What does 6PK2005 mean?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It denotes a 6-rib poly-V serpentine belt with a 2005 mm (79\") effective length, matching specific vehicle pulley systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55163369226583,"sku":"B000CB0KLG","price":31.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-usa-6pk2005-front-packaging.jpg?v=1790343581"},{"product_id":"bando-usa-serpentine-belt-7pk1035a-7-rib-1035mm-oem-fit-epdm-with-aramid-cord","title":"Bando USA serpentine belt 7PK1035A — 7-rib 1035mm OEM-fit, EPDM with aramid cord","description":"\u003cp\u003e\u003cstrong\u003eThe ban.do 7PK1035A is a factory-grade 7-rib serpentine belt made from EPDM rubber with aramid cord reinforcement, built to OEM dimensions for select Nissan and Infiniti engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBando USA brings over a century of rubber manufacturing experience and supplies original-equipment quality belts to many leading automakers. This 7PK1035A belt is precision-ground to match OEM rib profile and length (7 ribs × 1035 mm \/ 40.7 in) and uses EPDM compound and aramid cord for heat resistance, flexibility, and long service life. It’s designed as a direct replacement for belts used on a variety of Nissan and Infiniti models, manufactured to consistent premium standards that mirror factory performance.\u003c\/p\u003e\n\n\u003ch3\u003eWhat vehicles and engines does this belt fit?\u003c\/h3\u003e\n\u003cp\u003eThis specific belt covers a selection of Nissan and Infiniti models that use a 7-rib, 1035 mm serpentine belt. Confirm fitment by comparing the part number and belt dimensions with your vehicle’s service manual or the old belt markings. Installation compatibility depends on belt routing and accessory layout for each model year.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Infiniti: JX35 (2013), QX60 (2014–2020)\u003c\/li\u003e\n  \u003cli\u003eFits Nissan: Altima (2013–2018), Maxima (2016–2020)\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Murano (2015–2020), Pathfinder (2013–2020), Quest (2013–2017)\u003c\/li\u003e\n  \u003cli\u003eConfirm by matching 7 ribs and 1035 mm (40.7 in) length before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is this belt constructed and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eThe 7PK1035A uses EPDM rubber and an OEM-grade aramid (armid) cord to deliver durability and stable dimensional performance under heat and load. Bando precision-grinds the belt to replicate OEM rib profiles, which helps reduce slippage, noise, and premature wear compared with molded aftermarket belts. Those features matter in maintaining accessory drive reliability over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEPDM compound resists heat, ozone, and aging better than older rubbers\u003c\/li\u003e\n  \u003cli\u003eAramid cord provides high tensile strength and low elongation\u003c\/li\u003e\n  \u003cli\u003eDouble ground rib profile for precise pulley engagement\u003c\/li\u003e\n  \u003cli\u003eManufactured to consistent OEM-caliber standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the practical benefits during installation and use?\u003c\/h3\u003e\n\u003cp\u003eBecause it’s made to OEM dimensions and rib profile, the belt installs like the factory unit and typically requires no routing changes or belt modification. Mechanics and DIYers will notice a consistent tension and quieter operation when matched to factory pulleys and tensioners. Regular inspection and correct tensioning will maximize its service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for straightforward replacement\u003c\/li\u003e\n  \u003cli\u003eReduced chance of belt squeal when correctly tensioned\u003c\/li\u003e\n  \u003cli\u003eDurable materials mean longer intervals between replacements\u003c\/li\u003e\n  \u003cli\u003eWorks with original pulleys and tensioners without alteration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I verify I’m ordering the right belt?\u003c\/h3\u003e\n\u003cp\u003eCheck the part number on your old belt and measure ribs and length if possible; the 7PK1035A specification is 7 ribs and 1035 mm (40.7 in). Cross-reference with your vehicle’s service guide or the fitment list above, and compare pulley layout photos to ensure compatibility before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch part number 7PK1035A or measure 7 ribs × 1035 mm\u003c\/li\u003e\n  \u003cli\u003eCompare with vehicle fitment list in product details\u003c\/li\u003e\n  \u003cli\u003eInspect pulley alignment and tensioner condition before fitting\u003c\/li\u003e\n  \u003cli\u003eReplace associated tensioner\/idler if worn to avoid premature belt failure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ban.do 7PK1035A is aimed at vehicle owners, mechanics, and fleet technicians who need a reliable, OEM-spec replacement serpentine belt for compatible Nissan and Infiniti vehicles. It suits anyone seeking a long-lasting, heat-resistant belt engineered to match factory profile and fitment—especially when original-equipment quality and consistent manufacturing standards matter.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this an OEM-quality replacement belt?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The ban.do 7PK1035A is manufactured to OEM standards with EPDM rubber and aramid cord for comparable durability and fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this belt on a 2017 Nissan Altima?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 7PK1035A fits Nissan Altima models from 2013 through 2018 when the vehicle uses a 7-rib, 1035 mm belt.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55163393737047,"sku":"B00PKIWQLS","price":34.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-front-view-serpentine-belt.jpg?v=1790343909"},{"product_id":"bando-usa-serpentine-belt-6-rib-1855-mm-73-in-oem-quality-epdm-heat-resistant","title":"Bando USA Serpentine Belt 6‑Rib 1855 mm (73 in) OEM‑Quality EPDM Heat‑Resistant","description":"\u003cp\u003e\u003cstrong\u003eThe Bando USA 6PK1855 is an OEM‑quality 6‑rib serpentine belt (1855 mm \/ 73 in) built from heat‑resistant EPDM rubber and precision‑ground to meet original equipment specifications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned and manufactured by Bando — a global belt maker with over a century of rubber expertise and a long track record as an OEM supplier — the 6PK1855 offers the same construction standards used on factory belts. This serpentine belt is engineered for modern engine accessory loads, combining strong tensile cords, ground rib profiles and a durable EPDM compound to resist heat, wear and stretching. It is suitable for a wide range of passenger cars, light trucks and import models listed by fitment.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this belt match OEM performance?\u003c\/h3\u003e\n\u003cp\u003eThe 6PK1855 is produced to OEM tolerances and undergoes precision grinding to reproduce the original rib profile, unlike belts made from generic molds. Bando uses the same materials and quality controls for both factory supply and aftermarket parts, ensuring consistent fit and function.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-ground ribs for accurate pulley contact and reduced slippage\u003c\/li\u003e\n  \u003cli\u003eEPDM compound for improved heat resistance and long life\u003c\/li\u003e\n  \u003cli\u003eHigh-strength tensile cords to carry horsepower loads without stretching\u003c\/li\u003e\n  \u003cli\u003eManufactured to the same standards supplied to major automakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and applications does the 6PK1855 cover?\u003c\/h3\u003e\n\u003cp\u003eThis belt has broad compatibility across domestic and import vehicles — from older domestic trucks to several Audi, Chevrolet, Ford, Jeep and other models. Always verify fitment with your vehicle’s factory belt length and rib count before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6 ribs x 1855 mm (73 inches) nominal length\u003c\/li\u003e\n  \u003cli\u003eFits select Audi A6, Allroad, S4 models and multiple Chevrolet, Ford, Jeep, Mazda, Pontiac, Oldsmobile VIN years\u003c\/li\u003e\n  \u003cli\u003eDesigned for passenger cars, light trucks and some 4x4 applications\u003c\/li\u003e\n  \u003cli\u003eCross‑checks against OEM part numbers recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the 6PK1855 resist wear and heat over time?\u003c\/h3\u003e\n\u003cp\u003eBando’s EPDM rubber formulation and ground rib construction are chosen to withstand high under‑hood temperatures and extended service intervals. The compound resists cracking and glazing while the tensile cords maintain proper belt tension under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEPDM rubber provides superior heat and ozone resistance versus older rubbers\u003c\/li\u003e\n  \u003cli\u003eGround rubber ribs reduce irregular wear and help maintain traction with pulleys\u003c\/li\u003e\n  \u003cli\u003eHigh‑strength cords minimize elongation for consistent accessory timing\u003c\/li\u003e\n  \u003cli\u003eManufacturing controls from Bando’s global plants ensure repeatable quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installing this replacement belt?\u003c\/h3\u003e\n\u003cp\u003eConfirm the rib count (6), the belt length (1855 mm \/ 73 in), and compare to your vehicle’s OEM part number or service manual. Inspect pulleys, tensioner and accessories for wear; replacing a worn tensioner together with the belt extends service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify 6 ribs and 1855 mm (73 in) length against the original belt\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys and tensioner for bearing play or damage\u003c\/li\u003e\n  \u003cli\u003eReplace any worn idlers or tensioners when replacing the belt\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle manufacturer torque and routing diagrams during installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Bando USA 6PK1855 is aimed at owners and technicians needing an OEM‑grade replacement belt for compatible Audi, Chevrolet, Ford, Jeep, Mazda, Pontiac and other listed models. It suits those who want factory‑level fit, an EPDM compound for long service life, and a belt built to the same standards Bando supplies to automakers. Ideal for routine maintenance, restoration projects or when upgrading to a durable, precision‑finished serpentine belt.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eFeatures quick reference:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6 Ribs x 1855 mm (73 in)\u003c\/li\u003e\n  \u003cli\u003eStrong tensile cords resist stretching under load\u003c\/li\u003e\n  \u003cli\u003eAwarded OEM supplier with multiple manufacturer quality recognitions\u003c\/li\u003e\n  \u003cli\u003eGround ribs from high‑strength synthetic rubber for wear resistance\u003c\/li\u003e\n  \u003cli\u003eSame belt design used for OEM and aftermarket applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 6PK1855 the exact OEM replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — Bando manufactures this belt to OEM standards with precision‑ground ribs and the same materials used for factory supply.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What length and rib count does this belt have?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt is 1855 mm (73 inches) long and has 6 ribs; confirm these match your vehicle’s original belt before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55163395572055,"sku":"B000CAXI3E","price":32.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-6pk1855-front-packaging.jpg?v=1790343948"},{"product_id":"bando-usa-serpentine-belt-6pk2375-oem-quality-epdm-run-quiet-technology","title":"Bando USA Serpentine Belt 6PK2375 — OEM Quality EPDM, Run Quiet Technology","description":"\u003cp\u003e\u003cstrong\u003eThe Bando USA 6PK2375 is an OEM-quality serpentine belt engineered from EPDM rubber and precision ground to match factory rib profiles for reliable, long-lasting accessory drive performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt by Bando, a century-old belt manufacturer that supplies OEMs worldwide, this 6PK2375 serpentine belt is designed to meet factory specifications for fit, strength and longevity. Bando uses a two-step precision grinding process to achieve the exact rib profile required by modern engine accessory systems, and formulates the belt from EPDM rubber that resists heat and wear better than older compounds. Whether you're replacing a worn drive belt on a late‑model sedan, truck or light-duty vehicle, this belt is manufactured to the same high standards Bando supplies to automakers.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 6PK2375 ensure quiet, slip-free operation?\u003c\/h3\u003e\n\u003cp\u003eThe 6PK2375 incorporates Bando's proprietary \"Run Quiet\" technology which improves grip and reduces micro-slip, cutting down on noise and belt chatter. Precision-ground ribs ensure full contact with pulleys, lowering vibration and delivering smoother accessory operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRun Quiet compound reduces squeal and noise under load.\u003c\/li\u003e\n  \u003cli\u003ePrecision two-step grinding matches OEM rib geometry for consistent contact.\u003c\/li\u003e\n  \u003cli\u003eHigh-strength tensile cords minimize stretch and maintain tension.\u003c\/li\u003e\n  \u003cli\u003eEPDM rubber resists heat-related hardening that can lead to slipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and applications does this belt fit?\u003c\/h3\u003e\n\u003cp\u003eThe 6PK2375 covers a broad range of domestic and import applications across cars, trucks and SUVs. It fits numerous models from manufacturers such as Buick, Chevrolet, Ford, Jaguar, Mercury, Pontiac and more—consult vehicle fitment lists or the product guide to confirm compatibility for your year and engine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits include Buick Park Avenue and Regal (1997–1998) and Chevrolet Caprice (1993).\u003c\/li\u003e\n  \u003cli\u003eWide truck coverage such as Ford F-150\/F-250\/F-350 model years in the 1990s.\u003c\/li\u003e\n  \u003cli\u003eContemporary fits include Jaguar models like F-Pace (2019) and F-Type (2015–2021).\u003c\/li\u003e\n  \u003cli\u003eAlso fits vans and light trucks including Express\/Savana 3500 (2001–2002).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose Bando’s EPDM construction over other belt materials?\u003c\/h3\u003e\n\u003cp\u003eEPDM (ethylene propylene diene monomer) rubber is more heat- and ozone-resistant than older materials, which helps the belt maintain flexibility and strength over time. That translates to longer service life and fewer premature replacements, especially in high-temperature engine bays.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuperior heat resistance reduces cracking and hardening.\u003c\/li\u003e\n  \u003cli\u003eCompound designed for wear resistance increases mileage between changes.\u003c\/li\u003e\n  \u003cli\u003eConsistent performance under varying operating temperatures.\u003c\/li\u003e\n  \u003cli\u003eManufactured to OEM standards used by leading automakers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the 6PK2375 under high horsepower or demanding conditions?\u003c\/h3\u003e\n\u003cp\u003eThe 6PK2375 uses strong tensile cords and a reinforced rib compound to carry higher accessory loads without excessive stretch. This makes it suitable for engines with heavier accessory loads or for drivers who demand reliable performance under towing or prolonged highway use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength tensile cords resist elongation and preserve tension.\u003c\/li\u003e\n  \u003cli\u003eGround rubber ribs are compounded for abrasion resistance.\u003c\/li\u003e\n  \u003cli\u003eOEM-quality manufacturing reduces variability and early failures.\u003c\/li\u003e\n  \u003cli\u003eDesigned for both everyday driving and demanding operating conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this belt for? The Bando USA 6PK2375 is aimed at vehicle owners, fleet managers and independent technicians who want a direct-fit replacement that mirrors OEM quality without compromise. It’s ideal for drivers of covered Buick, Chevrolet, Ford, Jaguar and other listed vehicles who expect quiet operation, long life and consistent performance from a replacement serpentine belt. If you want an aftermarket belt built to the same standards supplied to automakers—and the heat and wear benefits of EPDM—this Bando belt is engineered for that purpose.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 6PK2375 an OEM-equivalent belt?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 6PK2375 is manufactured to OEM standards with precision-ground ribs and EPDM compound for factory-equivalent fit and performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does this serpentine belt typically last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Lifespan varies by driving conditions, but EPDM construction and reinforced cords generally extend service life compared with older compounds.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55163437220183,"sku":"B000CAYTHI","price":34.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-6pk2375-front-package-view.jpg?v=1790344631"},{"product_id":"bando-usa-serpentine-belt-7pk1125-7-rib-1125mm-epdm-oem-fit-long-life-quiet-operation","title":"Bando USA serpentine belt 7PK1125 — 7-rib 1125mm EPDM OEM-fit, long-life quiet operation","description":"\u003cp\u003e\u003cstrong\u003eThe ban.do 7PK1125 is an OEM-spec, EPDM serpentine drive belt engineered by Bando USA for long life, quiet operation, and precise fit on compatible vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBando has manufactured rubber drive components for over a century, supplying belts to many of the world's major automakers. The 7PK1125 serpentine belt is produced in Bando USA's Bowling Green facility to the same tolerances expected by OEMs: precision-ground ribs, high-strength tensile cord, and EPDM rubber compounded for heat resistance and wear life. This belt is intended as a direct-style replacement where the 7PK1125 specification is required, offering consistent belt geometry and run characteristics that match factory expectations.\u003c\/p\u003e\n\n\u003ch3\u003eHow is the 7PK1125 constructed to meet OEM standards?\u003c\/h3\u003e\n\u003cp\u003eBando builds the 7PK1125 using a combination of engineered materials and manufacturing controls that replicate OEM profile and performance. The belt undergoes double grinding of its rib profile to ensure accurate contact with pulleys and reduce vibration. Materials are selected for durability and temperature tolerance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEPDM rubber compound for improved heat and ozone resistance\u003c\/li\u003e\n  \u003cli\u003eHigh-tensile cord engineered to resist stretching under load\u003c\/li\u003e\n  \u003cli\u003ePrecision double-ground ribs to match OEM pulley geometry\u003c\/li\u003e\n  \u003cli\u003eManufactured to ISO and QS9000-aligned processes in Bowling Green, KY\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical benefits will I notice after installing this replacement belt?\u003c\/h3\u003e\n\u003cp\u003eWhen installed correctly, this belt helps restore proper accessory drive operation and reduces belt-slap or misalignment noise. Proprietary noise-control features increase grip and diminish slip during stop-and-go driving, producing a quieter cabin and steadier accessory performance. Longer wear resistance means fewer replacements over the vehicle’s life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduced squeal and hum thanks to run-quiet technology\u003c\/li\u003e\n  \u003cli\u003eImproved accessory drive grip under varying loads\u003c\/li\u003e\n  \u003cli\u003eLess frequent belt changes due to wear-resistant compound\u003c\/li\u003e\n  \u003cli\u003eConsistent tension retention from strong tensile cords\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this belt fit my vehicle and how do I confirm compatibility?\u003c\/h3\u003e\n\u003cp\u003eThe 7PK1125 is a length-and-rib-count designation. Confirm fit by matching the 7-rib profile and 1125 mm effective length to your vehicle’s OEM part number or service manual. Use vehicle-specific compatibility tools or consult a mechanic if you are unsure about tensioner or pulley differences that might affect installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch 7 ribs and 1125 mm specification to your OEM reference\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle parts catalogs or VIN-based fitment tools\u003c\/li\u003e\n  \u003cli\u003eInspect tensioner and idler condition when replacing the belt\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended for first-time jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should the belt be cared for to maximize lifespan?\u003c\/h3\u003e\n\u003cp\u003eRoutine visual checks and servicing of related components help the belt last longer. Keep pulleys, tensioners, and bearings in good condition to avoid premature wear. Replace the belt at the first sign of cracking, glazing, or rib damage and follow manufacturer-recommended service intervals for best results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect for cracking, fraying, or rib deformation regularly\u003c\/li\u003e\n  \u003cli\u003eReplace any worn pulleys, idlers, or a faulty tensioner promptly\u003c\/li\u003e\n  \u003cli\u003eAvoid exposure to engine oils and solvents that degrade rubber\u003c\/li\u003e\n  \u003cli\u003eFollow OEM service intervals for preventative replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ban.do 7PK1125 serpentine belt is aimed at mechanics, DIY enthusiasts, and fleet operators seeking an OEM-quality replacement that mirrors factory specifications. It’s suitable for vehicles that require a 7-rib, 1125 mm belt and for anyone who values precision fit, quieter operation, and durable EPDM rubber that withstands higher under-hood temperatures. Choose this belt when you want an aftermarket option manufactured by a long-established OEM supplier with global production standards.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the ban.do 7PK1125 an OEM equivalent belt?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s manufactured to OEM specifications with precision-ground ribs and EPDM compound to match factory performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm this belt fits my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Verify a 7-rib profile and 1125 mm length against your vehicle’s service manual or VIN-based parts lookup.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55163557413207,"sku":"B00FJSOMBG","price":32.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-7pk1125-front-packaging.jpg?v=1790345460"},{"product_id":"bando-usa-6pk2515-serpentine-belt-oem-quality-epdm-replacement-durable-quiet-fit","title":"Bando USA 6PK2515 Serpentine Belt — OEM‑quality EPDM replacement, durable quiet fit","description":"\u003cp\u003e\u003cstrong\u003eBando USA 6PK2515 is an OEM-quality EPDM serpentine belt engineered for durable, quiet accessory drive performance on the specified domestic and import vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt by a manufacturer with over a century of rubber experience and a global footprint, this serpentine belt matches OEM rib profile and tensile strength for reliable fit and long life. Bando produces belts to the same standards used by major automakers, so the 6PK2515 is intended as a direct-replacement drive belt that resists heat, wear, and stretching in modern engines.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles does the 6PK2515 fit?\u003c\/h3\u003e\n\u003cp\u003eThe 6PK2515 covers a broad range of domestic and import models across many years, including select Audi, Chevrolet, Chrysler, Dodge, Ford, GMC, Plymouth, Porsche and Volkswagen applications. Always cross-check with your vehicle's year, make and engine options before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAudi Q7 2013–2015 and Volkswagen Touareg 2013–2016\u003c\/li\u003e\n  \u003cli\u003eChevrolet Astro, G10\/G20\/G30 vans from early 1990s and GMC Safari variants\u003c\/li\u003e\n  \u003cli\u003eFord F-series trucks and Econoline vans across multiple model years (see fitment list)\u003c\/li\u003e\n  \u003cli\u003ePorsche Cayenne 2014 and select Chrysler\/Dodge minivans from the 1990s\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is this belt constructed to handle heat and wear?\u003c\/h3\u003e\n\u003cp\u003eBando uses EPDM rubber compounded for higher heat resistance and extended life compared with older materials. The belt features ground ribs and strong tensile cords to preserve rib profile and prevent stretching under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEPDM compound for thermal stability and long service life\u003c\/li\u003e\n  \u003cli\u003ePrecision double-ground ribs to match OEM profiles\u003c\/li\u003e\n  \u003cli\u003eHigh-strength tensile cords to carry horsepower loads without elongation\u003c\/li\u003e\n  \u003cli\u003eManufactured to single premium standard across Bando plants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this belt run quietly and reduce slip?\u003c\/h3\u003e\n\u003cp\u003eThe 6PK2515 incorporates Bando’s proprietary Run Quiet technology designed to improve pulley grip and minimize slippage and noise. That translates to smoother accessory operation and fewer belt squeals during start-up or heavy load conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSurface compounds engineered to reduce friction-related noise\u003c\/li\u003e\n  \u003cli\u003eRib geometry ground precisely for consistent contact with pulleys\u003c\/li\u003e\n  \u003cli\u003eLess slip means more efficient accessory drive and lower noise\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose an OEM-quality aftermarket belt instead of a generic mold-made belt?\u003c\/h3\u003e\n\u003cp\u003eBando emphasizes OEM-level production methods — including precision grinding — which yield a more accurate rib profile than many mold-made belts. That closer match reduces premature wear, belt chatter, and compatibility issues with modern accessory systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble grinding ensures rib profile matches OEM specifications\u003c\/li\u003e\n  \u003cli\u003eConsistent manufacturing across 19 global plants for dependable quality\u003c\/li\u003e\n  \u003cli\u003eDesigned for aftermarket and OEM replacement without sacrificing standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this belt for? The Bando USA 6PK2515 is aimed at professional technicians and DIYers who need an OEM-fit replacement serpentine belt for specific domestic and import vehicles. It suits owners who want a heat-resistant EPDM compound, reduced noise, and a high-strength cord construction for durable accessory drive performance. Verify fitment for your exact model and engine before installation to ensure correct compatibility.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 6PK2515 an exact OEM replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 6PK2515 is manufactured to OEM-quality standards with double-ground ribs to match OEM rib profiles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material is the belt made from?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It uses an EPDM rubber compound for improved heat resistance and longer service life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55165729538391,"sku":"B000CB0KQQ","price":39.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-usa-6pk2515-front-packaging.jpg?v=1790357568"},{"product_id":"bando-usa-serpentine-belt-7pk1781-for-honda-accord-2003-2007-oem-quality-epdm-twice-ground-ribs","title":"Bando USA serpentine belt 7PK1781 for Honda Accord 2003–2007 — OEM-quality EPDM, twice-ground ribs","description":"\u003cb\u003eThis is an OEM-quality Bando USA 7PK1781 serpentine belt in black, engineered to match factory specifications for compatible Honda Accord models from 2003–2007.\u003c\/b\u003e\n\n\u003cp\u003eBuilt by Bando, a century-old manufacturer and a top-tier OEM supplier to major automakers, this 7PK1781 belt is manufactured from EPDM compound and precision-ground ribs to deliver the same fit and profile used in original equipment. Bando produces belts to a single premium standard—used by manufacturers and sold in the aftermarket—so you get the same part design and materials the automaker intended. This listing covers the specific fit for Honda Accord years 2003 through 2007 and highlights construction and durability features relevant to everyday drivers and independent technicians.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this belt match original factory specifications?\u003c\/h3\u003e\n\u003cp\u003eThe 7PK1781 is manufactured to OEM tolerances: ribs are precision ground twice to recreate the exact profile required for smooth engagement with pulleys. Using EPDM rubber and strong tensile cords, the belt resists heat and stretching that can alter fit and function. Choosing a belt made to factory specs reduces noise, slippage and premature wear compared with lower-grade molded alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwice-ground rib profile for accurate pulley contact\u003c\/li\u003e\n  \u003cli\u003eEPDM compound for higher heat and ozone resistance\u003c\/li\u003e\n  \u003cli\u003eHigh-tensile cords to minimize elongation under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability traits should I expect?\u003c\/h3\u003e\n\u003cp\u003eBando designs its belts for long service life under normal driving conditions. The synthetic rubber compound and reinforced cords resist cracking, glazing and stretch, helping maintain consistent tension and accessory operation. These traits translate into fewer belt replacements and reliable accessory drive function over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWear-resistant rubber ribs for extended mileage\u003c\/li\u003e\n  \u003cli\u003eStable tensile strength to handle engine accessory loads\u003c\/li\u003e\n  \u003cli\u003eOEM-grade manufacturing reduces premature failure modes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this belt fit my vehicle and how do I verify compatibility?\u003c\/h3\u003e\n\u003cp\u003eThis part is listed to fit Honda Accord model years 2003 through 2007. Always cross-check the part number 7PK1781 against your vehicle’s existing belt, owner’s manual, or a dealer parts catalog before purchase. If you have a different engine option or accessory configuration, confirm fitment with your VIN or application guide.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntended applications: Honda Accord 2003–2007\u003c\/li\u003e\n  \u003cli\u003eConfirm by comparing OEM part number or checking vehicle VIN\u003c\/li\u003e\n  \u003cli\u003eContact support if unsure about accessory layout or tensioner type\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Bando's manufacturing history affect this product?\u003c\/h3\u003e\n\u003cp\u003eBando has supplied belts to top automakers for decades and operates multiple global plants under consistent quality standards. That scale and OEM experience mean the same design criteria used for factory installation are applied to aftermarket belts, so the part you receive mirrors the original equipment in composition and finish. The company’s reputation is backed by numerous industry awards and long-term OEM relationships.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOver 100 years of rubber product manufacturing expertise\u003c\/li\u003e\n  \u003cli\u003eManufactures OEM belts for many leading automakers\u003c\/li\u003e\n  \u003cli\u003eProduced to uniform premium standards across global plants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Bando 7PK1781 serpentine belt is for Honda Accord owners (2003–2007) and independent mechanics who want an exact-fit, OEM-quality replacement without the uncertainty of generic molded belts. It suits drivers seeking a durable belt made from high-temperature EPDM compound and technicians who rely on repeatable factory-level parts for repairs and maintenance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 7PK1781 a direct replacement for my Honda Accord?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this Bando 7PK1781 is listed to fit Honda Accord models from 2003 to 2007; confirm with your OEM part number or VIN before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material is the belt made of and why it matters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It uses EPDM rubber for improved heat and ozone resistance, and reinforced cords to reduce stretch and extend service life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55165833675095,"sku":"B000CMIG66","price":37.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-7pk1781-front-packaging.jpg?v=1790358389"},{"product_id":"bando-usa-serpentine-belt-6pk2415-oem-quality-epdm-6-rib-long-life-quiet-operation","title":"Bando USA serpentine belt 6PK2415 OEM-quality EPDM 6-rib — long-life, quiet operation","description":"\u003cp\u003e\u003cstrong\u003eThe ban.do 6PK2415 is an OEM-grade EPDM serpentine belt engineered for long life, quieter operation, and precise rib profile fit for many domestic and import vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBando USA brings more than a century of rubber manufacturing experience to this replacement serpentine belt. Built to the same exacting standards used for original equipment, the 6PK2415 is precision-ground for accurate rib shape, uses heat-resistant EPDM compound, and incorporates reinforced tensile cords so it resists stretch under load. That combination delivers reliable accessory drive performance across a wide range of engines and models.\u003c\/p\u003e\n\n\u003ch3\u003eWhat makes this belt OEM quality?\u003c\/h3\u003e\n\u003cp\u003eThe 6PK2415 is manufactured to match OEM specifications rather than a generic mold profile. It undergoes a dual-precision grinding process to reproduce the exact rib geometry required by vehicle makers, and the EPDM rubber compound provides improved heat and wear resistance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwice ground ribs for accurate profile contact with pulleys\u003c\/li\u003e\n  \u003cli\u003eEPDM compound for higher temperature tolerance and longevity\u003c\/li\u003e\n  \u003cli\u003eHigh-strength tensile cords to prevent elongation under load\u003c\/li\u003e\n  \u003cli\u003eProduced to the same standards Bando supplies to automakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does “Run Quiet” technology help my vehicle?\u003c\/h3\u003e\n\u003cp\u003eRun Quiet improvements reduce belt slippage and vibration that cause noise while keeping grip on accessory pulleys. That results in a smoother, quieter accessory drive system and more dependable accessory operation under varying loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved grip reduces squeal on startup and during acceleration\u003c\/li\u003e\n  \u003cli\u003eMinimized vibration for quieter cabin noise levels\u003c\/li\u003e\n  \u003cli\u003eMore consistent torque transfer to alternator, A\/C, and pumps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles does the 6PK2415 fit?\u003c\/h3\u003e\n\u003cp\u003eThis belt covers a broad list of domestic and import models across cars, SUVs, and light trucks. Check the fitment list against your vehicle year, make, and engine; it includes popular Audi, Cadillac, Chevrolet, GMC, GMC, Mercedes-Benz, Jeep and more.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVarious Audi models including A4, A6, A7 and Q5 across mid-2000s to mid-2010s\u003c\/li\u003e\n  \u003cli\u003eMultiple GM trucks and SUVs: Silverado, Sierra, Express, Savana, Suburban, and Tahoe-era platforms\u003c\/li\u003e\n  \u003cli\u003eOther makes: Cadillac SRX, Chevrolet Blazer\/Impala, Jeep Cherokee, Mercedes-Benz 190E\/E320, Isuzu Hombre\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does construction affect durability and performance?\u003c\/h3\u003e\n\u003cp\u003eDurability comes from the materials and construction choices: EPDM for rubber longevity and heat resistance, plus reinforced cords that resist stretching. Ground ribs maintain consistent contact with pulleys, reducing premature wear and preserving accessory drive alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEPDM compound resists ozone, heat, and abrasion better than standard rubber\u003c\/li\u003e\n  \u003cli\u003eReinforced cords maintain belt tension and prevent slacking over time\u003c\/li\u003e\n  \u003cli\u003ePrecision grinding reduces uneven wear and extends service intervals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ban.do 6PK2415 is intended for vehicle owners, mechanics, and fleet managers seeking an OEM‑level serpentine belt replacement for domestic and select import models. It’s a solid option for anyone who prioritizes correct fitment, quieter operation, and longer life from a belt that meets the same standards Bando supplies to automakers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 6PK2415 the same quality as an OEM belt?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s built to OEM standards with precision-ground ribs and EPDM compound matching automaker specifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm this belt fits my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare the 6PK2415 fitment list to your make, model, and year or verify by the belt part number and engine application.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55165843308887,"sku":"B000CMIG5M","price":36.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-6pk2415-front-packaging.jpg?v=1790358541"},{"product_id":"bando-usa-serpentine-belt-7pk1745-for-honda-cr-v-2010-2011-7-rib-1745mm-epdm-oem-grade","title":"Bando USA Serpentine Belt 7PK1745 for Honda CR-V 2010-2011 — 7-Rib 1745mm EPDM OEM-Grade","description":"\u003cp\u003e\u003cstrong\u003eBando USA 7PK1745 is an OEM-grade 7-rib serpentine belt (1745 mm \/ 68.7 in) designed to replace the factory drive belt on select Honda CR-V models with durable EPDM compound and precision-ground ribs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBando has produced rubber drive components for over a century and manufactures belts to the same standards used by original equipment automakers. The 7PK1745 matches OEM rib profile and tensile strength requirements by using a double-ground rib surface and high-strength synthetic rubber, giving consistent fit, quiet operation, and extended service life compared with lower-grade molded replacements.\u003c\/p\u003e\n\n\u003ch3\u003eWill this belt fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThis specific part is engineered to fit Honda CR-V model years 2010 and 2011 that require a 7-rib, 1745 mm serpentine belt. Always verify your vehicle's belt specifications against the OEM part number or your owner's manual before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment: Honda CR-V 2010–2011\u003c\/li\u003e\n  \u003cli\u003eConfiguration: 7 ribs × 1745 mm (68.7 inches)\u003c\/li\u003e\n  \u003cli\u003eMatches OEM rib profile and length\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Bando’s construction improve belt performance?\u003c\/h3\u003e\n\u003cp\u003eBando uses EPDM rubber compounded for heat resistance and wear life, combined with strong tensile cords that resist stretching under high loads. The belt’s ribs are precision ground twice to reproduce the exact OEM profile, improving engagement with pulleys and reducing slip and noise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: EPDM for heat and ozone resistance\u003c\/li\u003e\n  \u003cli\u003eDouble-ground ribs for precise pulley contact\u003c\/li\u003e\n  \u003cli\u003eHigh-strength tensile cords for horsepower loads and minimal elongation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance or replacement signs should I watch for?\u003c\/h3\u003e\n\u003cp\u003eInspect the belt periodically for cracks, glazing, rib fraying, or visible wear on the rib faces. A worn or stretched belt can cause squeal, poor accessory performance, and risk of sudden failure—replace it promptly if you see deterioration or after manufacturer-recommended service intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck ribs for cracking, chunking, or glazing\u003c\/li\u003e\n  \u003cli\u003eLook for uneven wear or missing rib material\u003c\/li\u003e\n  \u003cli\u003eReplace if slipping noises or accessory issues occur\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose an OEM-grade aftermarket belt over a cheaper molded option?\u003c\/h3\u003e\n\u003cp\u003eMolded belts often fail to reproduce the exact rib geometry and material properties required for modern accessory drives, which can shorten service life and increase noise. An OEM-grade precision-ground belt like the Bando 7PK1745 preserves correct fit and performance while providing the durability expected by vehicle makers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-ground ribs replicate OEM geometry\u003c\/li\u003e\n  \u003cli\u003eEPDM compound resists heat and aging better than many molded rubbers\u003c\/li\u003e\n  \u003cli\u003eOne-line manufacturing ensures consistent quality for OEM and aftermarket use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and technicians who need a direct-fit, OEM-quality replacement serpentine belt for Honda CR-V 2010–2011. It’s suited to owners who prioritize correct rib profile, durable EPDM construction, and tensile strength that withstands higher accessory loads. Ideal for routine maintenance shops, DIY mechanics, and anyone replacing a worn or damaged drive belt who wants the same specifications used by major automakers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Bando 7PK1745 fit models other than Honda CR-V 2010–2011?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This belt is specified for Honda CR-V 2010–2011. Verify your vehicle's required rib count and length against OEM specs before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material is used in the Bando 7PK1745 belt?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt is made from EPDM rubber with high-strength tensile cords, offering improved heat resistance and longer life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55165844259159,"sku":"B00E0EUP2K","price":37.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-usa-7pk1745-front-packaging.jpg?v=1790358568"},{"product_id":"bando-usa-poly-v-serpentine-belt-7pk1835-7-rib-1835mm-black-for-honda-accord-2008-2012-epdm-oem-fit","title":"Bando USA Poly-V Serpentine Belt 7PK1835 7-Rib 1835mm (Black) for Honda Accord 2008–2012 — EPDM, OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eThe Bando USA 7PK1835 Poly-V serpentine belt is a direct-fit, OEM-quality replacement belt engineered for Honda Accord 2008–2012 models, delivering durable EPDM construction and accurate rib profile for reliable accessory drive performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBando has over a century of rubber manufacturing experience and supplies belts to major automakers worldwide. This 7-rib, 1835mm (72.2 in) belt is produced to OEM tolerances using precision grinding and high-strength materials, so it resists wear, heat, and stretch while maintaining the rib shape modern engines require. The result is a long-lasting aftermarket option that matches the expectations of vehicle manufacturers and service professionals.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 7PK1835 belt match OEM standards?\u003c\/h3\u003e\n\u003cp\u003eThis belt is manufactured with the same engineering priorities as original equipment: accurate rib profile, consistent tensile strength, and EPDM rubber compound. Bando grinds each belt twice to ensure the rib geometry aligns with OEM pulley systems, reducing the risk of slipping or noise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision double-ground ribs to meet OEM fit and function\u003c\/li\u003e\n  \u003cli\u003eEPDM compound for higher heat resistance and longevity\u003c\/li\u003e\n  \u003cli\u003eStrong tensile cords to prevent stretching under load\u003c\/li\u003e\n  \u003cli\u003eBuilt to the same quality standards used for OEM production\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and applications is this belt compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe 7PK1835 replacement belt fits many Honda Accord model years and accessory-drive layouts specified for a 7-rib, 1835mm belt. It’s intended for engine accessory systems—power steering, alternator, A\/C compressor—where the OEM size and rib count match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact size: 7 ribs × 1835 mm (72.2 in)\u003c\/li\u003e\n  \u003cli\u003eCommon fit: Honda Accord model years 2008–2012\u003c\/li\u003e\n  \u003cli\u003eSuitable for alternator, A\/C, and power steering accessory drives\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement form, fit, and function for compatible pulleys\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction features improve longevity?\u003c\/h3\u003e\n\u003cp\u003eBando uses EPDM rubber and reinforced tensile cords to increase heat resistance and reduce wear. The combination of material choice and manufacturing controls—like molded compound formulas and post-mold grinding—helps the belt maintain its shape and strength over longer service intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEPDM rubber resists high under-hood temperatures and ozone\u003c\/li\u003e\n  \u003cli\u003eReinforced tensile cords carry high horsepower loads without stretch\u003c\/li\u003e\n  \u003cli\u003eGround ribs improve tracking and reduce premature wear\u003c\/li\u003e\n  \u003cli\u003eManufactured to consistent global production standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and inspect a replacement serpentine belt?\u003c\/h3\u003e\n\u003cp\u003eInstallation should follow the vehicle’s belt routing diagram and proper tensioning method—either automatic tensioner or specified torque for manual tensioners. Inspect pulleys, tensioner, and idlers for wear before fitting a new belt to avoid rapid belt failure or noise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify belt routing diagram under hood or in service manual\u003c\/li\u003e\n  \u003cli\u003eCheck pulleys and tensioner for smooth rotation and no play\u003c\/li\u003e\n  \u003cli\u003eUse correct tension procedure for your vehicle type\u003c\/li\u003e\n  \u003cli\u003eRecheck alignment and noise after initial run-in\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: technicians, DIY mechanics, and fleet managers seeking a dependable serpentine belt that mirrors the specifications of original equipment—especially owners of Honda Accord models from 2008 to 2012 who want a long-lasting, heat-resistant replacement that preserves accessory drive performance. Bando’s global manufacturing scale and OEM background make this belt a practical choice when you need consistent fit, reduced downtime, and aftermarket reliability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 7PK1835 belt a direct replacement for Honda Accord 2008–2012?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 7PK1835 matches the OEM 7-rib, 1835mm specification for many Honda Accord 2008–2012 accessory drive systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material is the Bando serpentine belt made from?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is made from EPDM rubber with reinforced tensile cords for heat resistance and reduced stretching.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55165844390231,"sku":"B00C68O2IK","price":37.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-usa-front-of-belt.jpg?v=1790358565"},{"product_id":"bando-usa-7-rib-serpentine-belt-7pk1765-1765mm-69-5in-oem-quality-epdm-precision-ground","title":"Bando USA 7-rib Serpentine Belt 7PK1765 1765mm (69.5in) — OEM-quality EPDM, precision-ground","description":"\u003cp\u003e\u003cstrong\u003eBando USA 7PK1765 is an OEM-quality 7-rib serpentine belt engineered in EPDM rubber for heat resistance, consistent rib profile, and long service life.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBando has over a century of experience manufacturing rubber drive components and supplies belts to many leading automakers. The 7PK1765 is produced to OEM tolerances using precision grinding rather than simple molding, delivering the accurate rib geometry modern accessory drives require. Built with strong tensile cords and advanced synthetic rubber compounds, this belt is designed to resist stretch, abrasion, and the high-temperature conditions common under today’s hoods.\u003c\/p\u003e\n\n\u003ch3\u003eHow is this belt different from low-cost molded belts?\u003c\/h3\u003e\n\u003cp\u003eThe 7PK1765 is finished with precision two-pass grinding, which creates a rib profile that matches OEM specifications exactly. Molded belts often fall short on rib shape and surface finish, which can cause noise, slippage, or faster wear. Bando’s materials and manufacturing controls reduce those risks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-pass precision grinding for exact rib geometry\u003c\/li\u003e\n  \u003cli\u003eEPDM compound for superior heat and ozone resistance\u003c\/li\u003e\n  \u003cli\u003eHigh-strength tensile cords that resist elongation under load\u003c\/li\u003e\n  \u003cli\u003eManufactured to the same standards used for OEM supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and fitment does the 7PK1765 cover?\u003c\/h3\u003e\n\u003cp\u003eThis belt fits a range of domestic and import models that require a 7-rib, 1765 mm (69.5 inch) length. Common applications include multiple model years of Dodge Viper and Honda Element, plus other vehicles using the same belt specification. Always verify your vehicle’s part number or belt measurement before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e7 ribs × 1765 mm (69.5 in) nominal length\u003c\/li\u003e\n  \u003cli\u003eDirect fit for specified Dodge Viper model years and Honda Element years\u003c\/li\u003e\n  \u003cli\u003eSuitable replacement where OEM 7PK1765 specification is required\u003c\/li\u003e\n  \u003cli\u003eCross-check service manual or existing belt label before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability features should I expect?\u003c\/h3\u003e\n\u003cp\u003eBando designs these belts to withstand demanding engine environments and accessory loads. The EPDM rubber compound provides improved resistance to heat, cracking, and weathering compared with older rubber formulations. Reinforced tensile cords carry high horsepower accessory loads without excessive stretch, preserving tension and accessory drive timing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEPDM construction for extended wear life and temperature stability\u003c\/li\u003e\n  \u003cli\u003eGround rubber ribs for consistent contact and reduced noise\u003c\/li\u003e\n  \u003cli\u003eStrong tensile cords prevent elongation under load\u003c\/li\u003e\n  \u003cli\u003eAward-winning OEM supplier pedigree and quality controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I inspect and install a replacement belt?\u003c\/h3\u003e\n\u003cp\u003eInspect pulleys, tensioner, and idlers for wear or rough bearings before installing a new belt. Align routing exactly as the vehicle specifies and use the correct tensioning procedure for either automatic or manual tensioners. Proper installation extends belt life and prevents accessory drive issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck pulleys and tensioner for play, noise, or roughness\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle routing diagrams to avoid mis-tracking\u003c\/li\u003e\n  \u003cli\u003eUse manufacturer torque\/tension specs or a calibrated tensioner tool\u003c\/li\u003e\n  \u003cli\u003eReplace belt if fraying, glazing, missing ribs, or heavy cracking present\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Bando USA 7PK1765 is aimed at mechanics, DIY owners, and fleet service teams who need an OEM-quality 7-rib serpentine belt that matches factory fit and performance. It’s a good choice for anyone replacing worn drive belts on compatible Dodge Viper and Honda Element models or on vehicles that list a 7PK1765 equivalent. Buyers who prioritize long service life, quiet operation, and OEM-level manufacturing processes will find this belt suited to high-demand automotive accessory drives.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 7PK1765 the exact OEM replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 7PK1765 is manufactured to OEM tolerances with precision-ground ribs to match factory specifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What does EPDM rubber mean for belt life?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: EPDM offers improved heat, ozone, and wear resistance compared with older compounds, extending service life under high-temperature conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55165845995863,"sku":"B000Q08SLC","price":38.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-usa-7pk1765-front-packaging.jpg?v=1790358590"},{"product_id":"bando-usa-6pk2580-serpentine-belt-6-rib-2580mm-oem-grade-epdm-long-life","title":"Bando USA 6PK2580 Serpentine Belt 6-Rib 2580mm OEM-Grade EPDM Long-Life","description":"\u003cp\u003e\u003cstrong\u003eBando USA 6PK2580 is an OEM-grade 6-rib serpentine belt designed to deliver long life, precise fit, and heat-resistant performance for many domestic and import vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt by a manufacturer with more than a century in rubber technology and decades supplying original equipment to top automakers, this belt is made from EPDM compound and precision-ground ribs to match OEM profiles. It targets drivers and repair shops who need a direct-fit replacement that meets factory tolerances and resists wear under high loads and elevated temperatures.\u003c\/p\u003e\n\n\u003ch3\u003eWhat makes this Bando belt match OEM standards?\u003c\/h3\u003e\n\u003cp\u003eThe 6PK2580 is produced using a mold-plus-grind workflow where ribs are ground twice to achieve the exact profile specified by vehicle manufacturers. The construction uses strong tensile cords and EPDM rubber, giving dimensional accuracy and heat resistance similar to factory-installed belts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble-precision grinding for accurate rib geometry\u003c\/li\u003e\n  \u003cli\u003eEPDM compound formulated for heat and ozone resistance\u003c\/li\u003e\n  \u003cli\u003eHigh-tensile cords minimize elongation under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the 6PK2580 under real-world driving?\u003c\/h3\u003e\n\u003cp\u003eThis belt is engineered for longevity: wear-resistant rib material and high-strength cords help it endure horsepower demands and environmental stress. Users should still inspect belts regularly, but this design extends service life compared with generic molded-only belts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGround rubber ribs resist abrasion for extended mileage\u003c\/li\u003e\n  \u003cli\u003eEPDM resists cracking from heat and ozone exposure\u003c\/li\u003e\n  \u003cli\u003eReinforced cords reduce stretching and maintain tension\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and sizes does this belt fit?\u003c\/h3\u003e\n\u003cp\u003eThe 6PK2580 measures 6 ribs by 2580 mm (101.5 inches) and covers a wide list of domestic and import cars, trucks, and SUVs. It’s offered as the same specification Bando supplies to OEMs, making it suitable where that exact belt length and rib count are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6 ribs x 2580 mm (101.5 inch) profile\u003c\/li\u003e\n  \u003cli\u003eFits selected models from GM, Ford, Chrysler, Hyundai, Jeep, Kia, Mercedes-Benz and more\u003c\/li\u003e\n  \u003cli\u003eUsed for passenger cars, light trucks, and SUVs listed in fitment details\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain this serpentine belt?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows typical belt-routing and tensioner procedures for your vehicle. Inspect pulleys, tensioner, and accessories for alignment and wear before fitting, and replace any failing components to protect the new belt.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck pulley alignment and tensioner condition before installing\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle-specific routing diagrams and torque specs\u003c\/li\u003e\n  \u003cli\u003eInspect periodically for cracks, glazing, or rib wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this belt for? The Bando USA 6PK2580 is aimed at mechanics, DIY enthusiasts, and fleet managers who want an OEM-quality replacement that mirrors factory belts in material and profile. If you need a reliable 6-rib 2580 mm serpentine belt for compatible GM, Ford, Chrysler, Hyundai, Jeep, Kia, Mercedes-Benz and other listed vehicles, this Bando part provides the same engineering standard used by automakers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 6PK2580 the same belt used by automakers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Bando manufactures this belt to the same OEM specifications supplied to vehicle manufacturers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What size and rib count is the 6PK2580?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is a 6-rib serpentine belt measuring 2580 mm (101.5 inches) for compatible vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55165855072599,"sku":"B000CMIGB6","price":38.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-6pk2580-front-packaging.jpg?v=1790358751"},{"product_id":"bando-usa-serpentine-belt-7pk2170-oem-grade-epdm-run-quiet-double-ground-ribs","title":"Bando USA serpentine belt 7PK2170 OEM-grade EPDM Run Quiet double-ground ribs","description":"\u003cp\u003e\u003cstrong\u003eBando USA 7PK2170 is an OEM-grade serpentine belt engineered from EPDM rubber with precision-ground ribs and \"Run Quiet\" technology for reliable, quiet accessory drive performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt by a company with more than a century in rubber manufacturing and a long history of supplying original equipment to top automakers, the 7PK2170 delivers the fit, materials, and manufacturing tolerances expected from OEM replacement belts. This belt is designed to meet the stress and heat demands of modern engines while matching the rib profile and tensile strength required for proper pulley engagement and long service life.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this belt differ from cheaper molded alternatives?\u003c\/h3\u003e\n\u003cp\u003eBando uses a precision double-grind process to achieve the exact rib profile OEM systems require, while many lower-cost belts are molded and can have inconsistent ribs. The 7PK2170's construction and materials reduce slippage, vibration, and premature wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble-ground ribs for accurate pulley contact and smoother operation\u003c\/li\u003e\n  \u003cli\u003eEPDM compound resists heat and ozone better than older rubber blends\u003c\/li\u003e\n  \u003cli\u003eHigh-strength tensile cords minimize stretch under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this belt fit my vehicle and handle everyday driving demands?\u003c\/h3\u003e\n\u003cp\u003eThe 7PK2170 is specified for several models including Honda Civic (2006–2011), Lincoln Town Car (1991–1992), and Mercury Grand Marquis (1992). Its design supports typical passenger-car accessory loads like alternators, power steering pumps, and A\/C compressors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for listed fitments — check part cross-reference for other models\u003c\/li\u003e\n  \u003cli\u003eEngineered for continuous daily use and stop-and-go driving\u003c\/li\u003e\n  \u003cli\u003eMeets OEM fit and functional requirements to help ensure proper belt routing and tension\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance features help it last and run quietly?\u003c\/h3\u003e\n\u003cp\u003eBando combines an EPDM rubber compound with strong tensile cords and a proprietary \"Run Quiet\" design to cut down on slip and noise. These elements work together to extend belt life under high heat and heavy loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRun Quiet technology for reduced belt noise and smoother start-up\u003c\/li\u003e\n  \u003cli\u003eReinforced tensile cords to carry higher horsepower without elongating\u003c\/li\u003e\n  \u003cli\u003eWear-resistant ground rubber ribs for long-lasting grip on pulley grooves\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Bando ensure consistent quality across belts?\u003c\/h3\u003e\n\u003cp\u003eBando manufactures to a single premium standard used for both OEM supply and aftermarket parts. With global production facilities and long-term OEM relationships, the company applies consistent processes and inspections to every belt it produces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOver 100 years of rubber manufacturing experience and extensive OEM supply history\u003c\/li\u003e\n  \u003cli\u003eManufactured to the same quality standards for OEM and aftermarket belts\u003c\/li\u003e\n  \u003cli\u003eProduced in plants following strict dimensional and material controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Bando USA 7PK2170 is aimed at drivers, mechanics, and fleet managers seeking an OEM-quality serpentine belt replacement that prioritizes correct fit, quieter operation, and longevity. It’s a suitable choice for owners of the listed vehicle models and for anyone who prefers belts built to OEM-style tolerances rather than low-cost molded alternatives. Always verify fitment for your specific year, engine, and accessories before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 7PK2170 the same quality as an OEM belt?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Bando produces the 7PK2170 to OEM-grade standards with precision-ground ribs and EPDM compound for comparable fit and durability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which vehicles use this belt?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Common fitments include Honda Civic (2006–2011), Lincoln Town Car (1991–1992), and Mercury Grand Marquis (1992); confirm compatibility with your vehicle.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55165857988951,"sku":"B000CAVE9E","price":35.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-usa-7pk2170-front-packaging.jpg?v=1790358835"},{"product_id":"bando-usa-serpentine-belt-7pk2120-oem-quality-epdm-precision-ground-ribs-for-quiet-long-lasting-fit","title":"Bando USA serpentine belt 7PK2120 — OEM-quality EPDM, precision-ground ribs for quiet, long-lasting fit","description":"\u003cp\u003e\u003cstrong\u003eThe ban.do 7PK2120 is an OEM-quality EPDM serpentine belt engineered for quiet, long-lasting drive performance on compatible Audi, Land Rover and Toyota models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBando USA brings more than a century of rubber manufacturing experience and OEM supply pedigree to this replacement serpentine belt. Built to match factory specifications, the 7PK2120 uses EPDM compound, reinforced tensile cords and precision-ground ribs to resist heat, wear and stretching. It’s designed as a direct-fit alternative to original equipment on many domestic and import vehicles while offering quieter operation under load.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this belt match OEM performance?\u003c\/h3\u003e\n\u003cp\u003eThe 7PK2120 is manufactured to the same exacting standards Bando supplies to automakers, using precision grinding to recreate the correct rib profile instead of molding. Reinforced tensile cords and a high-strength synthetic rubber compound provide the dimensional stability and wear resistance expected from OE parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision ground ribs for accurate OEM rib profile.\u003c\/li\u003e\n  \u003cli\u003eEPDM rubber compound for higher heat tolerance and durability.\u003c\/li\u003e\n  \u003cli\u003eStrong tensile cords resist stretching under horsepower loads.\u003c\/li\u003e\n  \u003cli\u003eProduced under the same premium standards used for OEM supply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it reduce noise and slipping compared with low-cost belts?\u003c\/h3\u003e\n\u003cp\u003eYes. The belt incorporates Bando’s proprietary \"Run Quiet\" technology to improve grip and reduce micro-slip, which lowers operational noise. This makes it a better choice for drivers who want quieter accessory drive performance without sacrificing reliability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRun Quiet formulation reduces squeal and chirp under load.\u003c\/li\u003e\n  \u003cli\u003eGround ribs improve contact with pulleys for consistent traction.\u003c\/li\u003e\n  \u003cli\u003eDurable compound resists glazing that causes noise over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and applications are compatible with 7PK2120?\u003c\/h3\u003e\n\u003cp\u003eThe 7PK2120 fits a variety of domestic and import models where that belt size and rib count are specified. It covers several Toyota pickups and SUVs, older Land Rover Range Rover years, and some Audi A8 Quattro model years—check fitment against your vehicle’s parts list before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAudi A8 Quattro: 2015–2016 compatibility for specified configurations.\u003c\/li\u003e\n  \u003cli\u003eLand Rover Range Rover: selected 1996–1998 model fitment.\u003c\/li\u003e\n  \u003cli\u003eToyota: 4Runner (2003–2009), FJ Cruiser (2007–2009), Tacoma (2005–2019), Tundra (2005–2012).\u003c\/li\u003e\n  \u003cli\u003eDirect-fit replacement when 7PK2120 is OEM part number or equivalent.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long can I expect this belt to last and what protects it?\u003c\/h3\u003e\n\u003cp\u003eLongevity depends on vehicle use and maintenance, but EPDM construction plus high-strength cords and wear-resistant rubber ribs extend service life versus older rubber formulations. Proper pulley alignment and tensioner condition also affect lifespan—inspect accessories during replacement for best results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEPDM resists heat and ozone-related deterioration.\u003c\/li\u003e\n  \u003cli\u003eWear-resistant ribs help maintain profile and grip over time.\u003c\/li\u003e\n  \u003cli\u003eStrong cords prevent elongation that can lead to slippage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ban.do 7PK2120 is aimed at technicians, DIY mechanics and vehicle owners seeking an OEM-quality replacement belt for specific Audi, Land Rover and Toyota applications. It’s ideal for those who prioritize factory-fit performance, quieter accessory operation and durable materials that stand up to heat and high loads. Always confirm part compatibility with your vehicle’s service manual or parts lookup before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the ban.do 7PK2120 a direct OEM replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; the 7PK2120 is manufactured to OEM-quality standards and fits applications that specify this part size.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What materials make this belt more durable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It uses EPDM rubber and reinforced tensile cords for better heat resistance, wear protection and reduced stretching.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55165876568407,"sku":"B000CMEIGS","price":38.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-7pk2120-front-packaging.jpg?v=1790359213"},{"product_id":"bando-usa-serpentine-belt-6pk1880-6-rib-1880mm-74in-epdm-oem-quality-quiet-run","title":"Bando USA Serpentine Belt 6PK1880 6-Rib 1880mm (74in) EPDM OEM-Quality Quiet-Run","description":"\u003cp\u003e\u003cstrong\u003eThe Bando USA 6PK1880 is an OEM-grade 6-rib serpentine belt (1880 mm \/ 74.0 in) engineered for long life and quiet operation on a wide range of domestic and import vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBando has produced precision rubber drive belts for over a century, supplying original equipment to many leading automakers. The 6PK1880 serpentine belt is manufactured from EPDM compound and ground to exact OEM rib profiles so it fits modern accessory pulleys precisely. Built with strong tensile cords and a proprietary quiet-running formulation, this belt is intended to meet the same performance standards as factory-installed belts while providing improved heat and wear resistance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 6PK1880 deliver better durability than generic belts?\u003c\/h3\u003e\n\u003cp\u003eDurability starts with materials and exact fit. Bando uses EPDM rubber compounds resistant to heat and ozone, and the ribs are precision-ground twice to match OEM profiles—reducing stress points and uneven wear. High-strength tensile cords prevent excessive stretch under load, which preserves belt tension and accessory alignment over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEPDM compound for improved heat and ozone resistance\u003c\/li\u003e\n  \u003cli\u003eDouble-ground ribs for accurate pulley engagement\u003c\/li\u003e\n  \u003cli\u003eReinforced tensile cords to resist stretching under horsepower\u003c\/li\u003e\n  \u003cli\u003eManufactured to OEM quality standards for consistent dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this belt fit my car and what vehicles does it support?\u003c\/h3\u003e\n\u003cp\u003eThe 6PK1880 is a 6-rib belt with a length of 1880 mm (74.0 inches) designed to replace factory belts on many model-year vehicles. It covers a broad list of domestic and import cars and light trucks—check your OEM part number or belt length to confirm compatibility. When matched to the specified rib count and length, it installs like the original and drives alternators, power steering pumps, AC compressors and other accessories reliably.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6 ribs x 1880 mm (74.0 in) length\u003c\/li\u003e\n  \u003cli\u003eCommon fits: Audi A4\/A6 (1996–2005), Chevrolet Aveo (2004–2008), Toyota Corolla\/Matrix\/Celica (2002–2008)\u003c\/li\u003e\n  \u003cli\u003eAlso used on Mercedes C230\/SLK230, Mitsubishi Lancer, Volkswagen Passat, Prizm\u003c\/li\u003e\n  \u003cli\u003eConfirm by comparing the belt length and rib count to your factory belt\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does \"Run Quiet\" technology affect everyday driving?\u003c\/h3\u003e\n\u003cp\u003eBando's proprietary Run Quiet technology reduces belt slip and noise by improving grip between ribs and pulleys. The result is quieter accessory drive operation, especially noticeable during cold starts and heavy accessory loads. Reduced slip also lowers friction-related wear, helping maintain smooth performance across mileage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnhanced rib profile and compound reduce squeal and chirp\u003c\/li\u003e\n  \u003cli\u003eBetter grip minimizes slippage at startup and under load\u003c\/li\u003e\n  \u003cli\u003eLess frictional wear extends service intervals and longevity\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet OEM acoustic and performance expectations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect when replacing my serpentine belt with this Bando unit?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the same routine as replacing any OEM serpentine belt: relieve tension with the belt tensioner, route the new belt to match the pulley diagram, and verify tension and alignment. Because Bando belts are ground to OEM geometry, fitment and run-in should be immediate—there’s typically no break-in period beyond a quick visual and tension check. For peace of mind, inspect pulleys and the tensioner while replacing the belt to avoid premature wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall using standard tensioner tool procedures\u003c\/li\u003e\n  \u003cli\u003eVerify correct rib alignment and tension after fitment\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys and tensioner for wear before finalizing installation\u003c\/li\u003e\n  \u003cli\u003eCompatible with original routing diagrams and accessory layouts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Bando USA 6PK1880 is aimed at DIY mechanics, independent shops, and fleet managers who want an OEM-quality replacement belt that matches factory dimensions and materials. It’s particularly suited for owners of late‑1990s to mid‑2000s Audi, Mercedes, Toyota, Volkswagen, Chevrolet, and Mitsubishi models that require a 6-rib, 1880 mm serpentine belt. Choose this belt when you want precise fit, quieter operation, and longer service life without stepping up to specialty or race-specific drive components.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 6PK1880 the correct size for my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your current belt’s length (1880 mm \/ 74.0 in) and rib count (6 ribs) or compare OEM part numbers to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace this serpentine belt?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace based on manufacturer intervals or when you notice cracking, glazing, or loss of tension—inspect at regular service intervals for wear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55166111744343,"sku":"B000CAYT78","price":35.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-usa-6pk1880-front-packaging.jpg?v=1790363270"},{"product_id":"bando-usa-serpentine-belt-6pk2225-oem-grade-epdm-double-ground-ribs-for-quiet-durable-drive","title":"Bando USA Serpentine Belt 6PK2225 – OEM-grade EPDM, Double-Ground Ribs for Quiet Durable Drive","description":"\u003cstrong\u003eBando USA 6PK2225 is an OEM-grade serpentine belt built from EPDM rubber and precision-ground ribs for long life and reliable accessory drive performance.\u003c\/strong\u003e\n\n\u003cp\u003eEngineered by Bando, a belt manufacturer with over a century of experience and OEM supply history, the 6PK2225 replaces worn serpentine belts on many domestic and import vehicles. Manufactured to meet original-equipment rib profiles and tensile standards, this belt emphasizes heat resistance, reduced noise and consistent power transmission to alternators, power steering pumps, air conditioning compressors and other front-end accessories.\u003c\/p\u003e\n\n\u003ch3\u003eWhat makes the 6PK2225 different from economy or molded belts?\u003c\/h3\u003e\n\u003cp\u003eThe 6PK2225 is precision-ground twice to match OEM rib geometry, while molded belts often fail to reproduce exact rib profiles. Bando uses EPDM compound and high-strength tensile cords to resist heat, cracking and stretch so the belt keeps correct tension over its service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble precision grinding for accurate rib shape and pulley fit\u003c\/li\u003e\n  \u003cli\u003eEPDM rubber formulation for high-temperature durability\u003c\/li\u003e\n  \u003cli\u003eStrong tensile cords to prevent elongation under load\u003c\/li\u003e\n  \u003cli\u003eProprietary “Run Quiet” design to reduce slippage and noise\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this belt perform under heavy use or high temperatures?\u003c\/h3\u003e\n\u003cp\u003eBando designs its belts for modern high-output engines and extended duty cycles; EPDM resists heat-related hardening and cracking better than older rubber compounds. The reinforced cord package maintains tensile strength so the belt resists stretch and continues driving accessories reliably under higher loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-resistant compound preserves flexibility at elevated temperatures\u003c\/li\u003e\n  \u003cli\u003eWear-resistant ground ribs reduce glazing and slip\u003c\/li\u003e\n  \u003cli\u003eTensile cords carry higher horsepower loads without permanent stretch\u003c\/li\u003e\n  \u003cli\u003eConsistent performance across stop-and-go and highway driving\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles can the 6PK2225 fit, and how do I confirm fitment?\u003c\/h3\u003e\n\u003cp\u003eThis part fits numerous domestic trucks, SUVs, sedans and select import models across model years listed by Bando. Always confirm fitment by cross-referencing the OEM part number or checking the vehicle compatibility list with your year, make and engine to ensure proper length and rib count.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCovers select Cadillac, Chevrolet, GMC, Ford, Dodge, Mazda and Mercedes models\u003c\/li\u003e\n  \u003cli\u003eIncludes many late-1990s and 2000s GM trucks and SUVs and select import cars\u003c\/li\u003e\n  \u003cli\u003eVerify by vehicle year, engine and OEM belt specifications before purchase\u003c\/li\u003e\n  \u003cli\u003eCan be used as a like-for-like OEM replacement when numbers match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation and maintenance affect belt lifespan?\u003c\/h3\u003e\n\u003cp\u003eProper routing, correct tension and checking pulleys and tensioners are essential for long life; a quality belt still depends on a healthy accessory drive system. Inspect pulleys for damage, replace worn tensioners and keep the belt clean of oil and coolant to avoid premature deterioration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnsure correct routing and tension per vehicle service manual\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys, idlers and tensioner bearings before fitting a new belt\u003c\/li\u003e\n  \u003cli\u003eKeep belt free from oil, coolant and debris to prevent slippage and wear\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer intervals or inspect visually for cracking and glazing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Bando USA 6PK2225 is aimed at professional mechanics, DIY enthusiasts and fleet managers who want an OEM-quality replacement belt with proven manufacturing pedigree. If you need a durable, heat-resistant serpentine belt that matches OEM rib profile and reduces noise, this Bando belt is appropriate—provided you confirm vehicle compatibility first.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 6PK2225 an OEM-equivalent belt?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Bando manufactures the 6PK2225 to OEM specifications with precision-ground ribs and OEM-grade materials.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I check this belt fits my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Cross-check the 6PK2225 part number with your vehicle’s OEM belt number or consult the compatibility list for year, make and engine.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55166144545111,"sku":"B000CB0KP2","price":38.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-usa-6pk2225-front-packaging.jpg?v=1790364235"},{"product_id":"bando-usa-serpentine-belt-6pk2095-oem-grade-epdm-twice-ground-ribs-for-long-life","title":"Bando USA Serpentine Belt 6PK2095 — OEM-grade EPDM, twice-ground ribs for long life","description":"\u003cstrong\u003eBando USA 6PK2095 is an OEM-grade serpentine belt engineered from EPDM rubber to deliver quiet operation, accurate rib profile, and long life for a wide range of vehicle applications.\u003c\/strong\u003e\n\n\u003cp\u003eMade by a company with over a century of rubber manufacturing experience and a global footprint, the 6PK2095 serpentine belt is built to meet original equipment standards. Bando produces belts to the same specifications supplied to many top automakers, using precision grinding and reinforced tensile cords to handle modern engine loads while minimizing noise and slippage.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 6PK2095 match OEM fit and performance?\u003c\/h3\u003e\n\u003cp\u003eThe 6PK2095 is manufactured to OEM tolerances with twice-ground ribs for an accurate profile that conforms to pulley geometry. That precision reduces wear on both the belt and accessory pulleys and helps maintain proper accessory drive function under variable loads.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwice-ground ribs for exact OEM geometry\u003c\/li\u003e\n\u003cli\u003eEPDM compound formulated to OEM heat and wear standards\u003c\/li\u003e\n\u003cli\u003eStrong tensile cords to resist stretch under high horsepower\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features reduce noise and slipping in real use?\u003c\/h3\u003e\n\u003cp\u003eBando’s proprietary “Run Quiet” technology and the ground rubber ribs improve grip and reduce micro-slip that causes squeal. The combination of compound, cord strength, and rib profile produces a quieter accessory drive and more consistent power transfer to alternator, power steering, and A\/C.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRun Quiet technology for lower audible noise\u003c\/li\u003e\n\u003cli\u003eHigh-strength synthetic rubber ribs for grip and wear resistance\u003c\/li\u003e\n\u003cli\u003eTensile cords that maintain tension and minimize slip\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles does this belt fit and why is compatibility broad?\u003c\/h3\u003e\n\u003cp\u003eThe 6PK2095 covers a diverse list of domestic and import vehicles, including many Hondas, Chryslers, Jeeps, Cadillacs, and older Mercedes models. Bando’s adherence to OEM profile and material standards enables wide application across model years and engine layouts that share the same belt length and rib count.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits Acura, Honda, Chrysler, Dodge, Jeep, Mazda, Cadillac, Buick and select Mercedes models\u003c\/li\u003e\n\u003cli\u003eDesigned to meet OEM length and rib specifications for listed vehicles\u003c\/li\u003e\n\u003cli\u003eManufactured to the same exacting standards used for OEM supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this belt under heat, load, and mileage?\u003c\/h3\u003e\n\u003cp\u003eConstructed from EPDM rubber and reinforced with strong tensile cords, the 6PK2095 resists heat-related hardening and stretching that shorten belt life. Ground ribs and a wear-resistant compound reduce material loss, supporting consistent performance over extended service intervals.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEPDM compound for improved heat resistance and longevity\u003c\/li\u003e\n\u003cli\u003eWear-resistant rib compound to slow degradation\u003c\/li\u003e\n\u003cli\u003eTensile cords to handle higher horsepower without elongation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Bando USA 6PK2095 is ideal for owners, mechanics, and fleet operators who want an OEM-quality replacement belt with precise fit, quieter operation, and extended life. It suits those maintaining older domestic and import vehicles that require a reliable serpentine belt matching factory specifications, and anyone upgrading to an aftermarket belt made by an established OEM supplier.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey specs and benefits at a glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOEM-quality manufacturing with twice-ground ribs\u003c\/li\u003e\n\u003cli\u003eEPDM rubber compound for heat and wear resistance\u003c\/li\u003e\n\u003cli\u003eProprietary Run Quiet technology for reduced noise\u003c\/li\u003e\n\u003cli\u003eStrong tensile cords to resist stretch and handle load\u003c\/li\u003e\n\u003cli\u003eBroad vehicle compatibility across domestic and import models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 6PK2095 the same as the original factory belt?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 6PK2095 is made to OEM tolerances with twice-ground ribs and EPDM compound to match factory performance and fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this belt withstand high under-hood temperatures?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Its EPDM compound and wear-resistant ribs are formulated to handle higher engine temperatures and extend service life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55166228300119,"sku":"B000CAVE1W","price":35.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-6pk2095-front-view.jpg?v=1790365398"},{"product_id":"bando-usa-serpentine-belt-7pk1550-oem-fit-epdm-precision-ground-ribs","title":"Bando USA serpentine belt 7PK1550 — OEM-fit EPDM, precision-ground ribs","description":"\u003cp\u003e\u003cstrong\u003eBando USA 7PK1550 is a factory-quality EPDM serpentine belt engineered to match OEM fit, rib profile and durability for select Lexus and Toyota engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned by a manufacturer with over a century of rubber expertise and extensive OEM collaborations, this 7PK1550 belt delivers the rib geometry and material properties automakers require. Bando uses precision grinding and high-strength cord construction to create belts that resist heat, abrasion and stretching — the same specification used in many original equipment installations.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines will this belt fit?\u003c\/h3\u003e\n\u003cp\u003eThis belt covers many popular Lexus and Toyota models from the mid-2000s to late 2010s, matching the OEM length and rib count for listed applications. Confirm fitment with your vehicle’s model year and engine code before ordering.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Lexus: ES350 (2013–2019), GS300 (2006), GS350 (2007–2011, 2013–2015), IS250\/IS350\/IS300 (2006–2018 ranges), RC300\/RC350 (2015–2018), RX350 (2010–2015)\u003c\/li\u003e\n\u003cli\u003eCompatible with Toyota: Avalon (2013–2018), Camry (2012–2019), Highlander (2008–2016), RAV4 (2006–2012), Sienna (2011–2016), Venza (2009–2016)\u003c\/li\u003e\n\u003cli\u003eAlways verify OEM part numbers or measure belt length and rib profile for exact replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Bando 7PK1550 perform under engine stress?\u003c\/h3\u003e\n\u003cp\u003eThe belt uses EPDM rubber and high-tensile cords to sustain heat and transfer high accessory loads without permanent stretch. Precision grinding ensures the ribs engage pulleys correctly, reducing slippage and noise compared with lower-grade molded belts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEPDM compound for improved heat and ozone resistance\u003c\/li\u003e\n\u003cli\u003eHigh-strength cords to handle horsepower and accessory loads\u003c\/li\u003e\n\u003cli\u003ePrecision ground ribs for accurate pulley contact and quieter operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose Bando instead of generic aftermarket belts?\u003c\/h3\u003e\n\u003cp\u003eBando supplies many automakers with original belts, so their aftermarket line follows the same manufacturing standards as OEM parts. This results in consistent dimensions, material quality and longevity comparable to factory replacements.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSame production standards used for OEM and aftermarket belts\u003c\/li\u003e\n\u003cli\u003eOver 100 quality awards from major automakers indicate reliability\u003c\/li\u003e\n\u003cli\u003eOne global manufacturer with multiple plants ensures consistent quality control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard serpentine belt replacement steps using a tensioner tool. After installing, inspect pulleys, tensioner and idlers — replacing worn components extends belt life and prevents premature failures.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse a belt tensioner tool to release and set tension properly\u003c\/li\u003e\n\u003cli\u003eCheck pulleys, tensioner, and idler bearings for wear or noise\u003c\/li\u003e\n\u003cli\u003eFollow vehicle service interval recommendations for belt inspection and replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Bando USA 7PK1550 is aimed at technicians, DIYers and fleet maintainers who need an OEM-equivalent serpentine belt for compatible Lexus and Toyota vehicles. It’s a practical choice when you want a replacement that matches factory specifications for fit, material and performance without sacrificing durability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 7PK1550 an OEM replacement belt?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Bando manufactures this belt to OEM specifications, using the same standards they supply to automakers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm this belt fits my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare your vehicle's year and model against the listed applications or match the belt length and rib count to your existing belt.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55166340301143,"sku":"B0027A76GW","price":36.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-usa-7pk1550-front-view.jpg?v=1790366977"},{"product_id":"bando-usa-epdm-serpentine-belt-6pk2345-oem-quality-quiet-long-life-replacement","title":"Bando USA EPDM Serpentine Belt 6PK2345 — OEM Quality, Quiet Long-Life Replacement","description":"\u003cp\u003e\u003cstrong\u003eBando USA 6PK2345 is an OEM-quality EPDM serpentine belt engineered for long life, quiet operation and exact fit to many domestic and import engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBando has over a century of rubber manufacturing experience and supplies belts to major automakers worldwide. The 6PK2345 is manufactured to meet OEM tolerances: ribs are precision-ground twice to match factory profiles, tensile cords resist stretch under high loads, and EPDM rubber improves heat resistance and longevity compared with older compounds. Built with a consistent premium process, this belt is designed as a direct replacement for a broad range of cars, trucks and vans.\u003c\/p\u003e\n\n\u003ch3\u003eWill this belt fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe 6PK2345 fits many GM, Ford, Lincoln, Cadillac, Chevrolet, GMC, Jeep, Saab and other models across several years. Fitment covers a wide selection of passenger cars, SUVs, light trucks and vans — check your OEM belt code or vehicle application list to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits include Chevrolet Silverado, Avalanche, Express series, Corvette, and Tahoe across late 1980s–2008 model years.\u003c\/li\u003e\n  \u003cli\u003eAlso fits Ford Mustang, Crown Victoria, Econoline vans, Lincoln Town Car, and select Mercury models.\u003c\/li\u003e\n  \u003cli\u003eCompatible with GMC Sierra, Savana, Yukon and certain Envoy\/Envoy XL applications.\u003c\/li\u003e\n  \u003cli\u003eFits additional brands like Jeep (Wrangler, Grand Cherokee), Isuzu Ascender and Saab 9-3\/9-7x in listed years.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Bando’s construction improve durability and noise control?\u003c\/h3\u003e\n\u003cp\u003eBando uses EPDM rubber and proprietary construction techniques for wear resistance and lower operating noise. Ribs are double-ground to OEM profiles, and high-strength tensile cords prevent elongation under horsepower loads, maintaining proper belt tension and accessory performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEPDM compound increases heat tolerance and resists ozone and aging better than older rubbers.\u003c\/li\u003e\n  \u003cli\u003ePrecision-ground ribs ensure consistent contact with pulleys, reducing slip and vibration.\u003c\/li\u003e\n  \u003cli\u003eRun Quiet technology improves grip and lowers audible belt noise during operation.\u003c\/li\u003e\n  \u003cli\u003eStrong tensile cords carry high loads without stretching, extending service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect when replacing a serpentine belt with this part?\u003c\/h3\u003e\n\u003cp\u003eWhen installed correctly, the 6PK2345 should restore proper drive accessory operation and reduce belt-driven noise. Replacement typically requires routing the belt around accessory pulleys and releasing tensioner tension; always follow vehicle-specific procedures and inspect pulleys and tensioners while replacing the belt.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify belt direction and routing against the vehicle’s under-hood diagram.\u003c\/li\u003e\n  \u003cli\u003eInspect idler pulleys, tensioner, and accessory pulleys for wear before installation.\u003c\/li\u003e\n  \u003cli\u003eAfter installation, start engine and observe belt tracking and listen for unusual noises.\u003c\/li\u003e\n  \u003cli\u003eRecheck belt tension and alignment after a short test drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose an OEM-quality aftermarket belt instead of a generic replacement?\u003c\/h3\u003e\n\u003cp\u003eAn OEM-quality belt like Bando’s 6PK2345 is manufactured to the same precision standards used by vehicle makers, which helps ensure correct rib profile, tension behavior and longevity. Generic molded belts may not match rib geometry or compound specifications, which can cause premature wear or noise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision grinding produces accurate rib shape that matches factory pulleys.\u003c\/li\u003e\n  \u003cli\u003eUniform manufacturing standards yield consistent performance across replacement belts.\u003c\/li\u003e\n  \u003cli\u003eHigher-grade materials and cords reduce the need for early replacement and maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers, independent mechanics and fleet managers who need a dependable, OEM-grade serpentine belt replacement for domestic and some import vehicles. Choose the Bando USA 6PK2345 when you want a direct-fit, long-wearing EPDM belt built to factory-level tolerances and designed to keep accessory systems functioning quietly and reliably.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 6PK2345 an exact OEM replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — this belt is produced to OEM-grade standards with double-ground ribs and EPDM compound for accurate fit and factory-like performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this belt myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Many owners can replace a serpentine belt with basic tools, but follow the vehicle’s routing diagram and check tensioner and pulleys; consult a mechanic if unsure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55166613258583,"sku":"B000CAXIBQ","price":36.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-usa-6pk2345-front-view.jpg?v=1790369029"},{"product_id":"bando-usa-serpentine-belt-6pk2440-6-rib-2440mm-96in-epdm-oem-quality-precision-ground-for-durable-quiet-operation","title":"Bando USA serpentine belt 6PK2440 — 6-rib 2440mm (96in) EPDM, OEM-quality precision-ground for durable, quiet operation","description":"\u003cstrong\u003eBando USA 6PK2440 is an OEM-quality 6-rib serpentine belt made from EPDM rubber and precision-ground to match factory rib profiles for dependable drive-system performance.\u003c\/strong\u003e\n\n\u003cp\u003eDesigned and manufactured by Bando — a company with more than a century of rubber-production experience and widespread OEM credentials — the 6PK2440 belt delivers the fit, material grade and construction that match original equipment standards. Built with heat-resistant EPDM compound and strong tensile cords, this belt targets applications across domestic, import and light-truck vehicles where OEM-equivalent durability and quiet operation are required.\u003c\/p\u003e\n\n\u003ch3\u003eHow is this belt manufactured to meet OEM standards?\u003c\/h3\u003e\n\u003cp\u003eBando uses a precision grinding process rather than a single cast mold to create the rib profile, which helps the belt follow the exact geometry that engine accessory pulleys require. Multiple quality controls and materials chosen for performance ensure consistent sizing and long life comparable to factory belts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision double-ground rib profiling for accurate pulley contact\u003c\/li\u003e\n  \u003cli\u003eEPDM rubber compound for higher heat and ozone resistance\u003c\/li\u003e\n  \u003cli\u003eHigh-strength tensile cords to resist stretching under load\u003c\/li\u003e\n  \u003cli\u003eProduced to the same standards Bando supplies to global OEMs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and configurations will this 6PK2440 belt fit?\u003c\/h3\u003e\n\u003cp\u003eThe 6PK2440 designation indicates a 6-rib belt with an effective length of 2440 mm (~96 inches), so fitment is vehicle-specific and tailored to various older domestic and select import models. Always confirm fit using your vehicle’s year, make, model and engine code or compare the belt size to your existing belt.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6 ribs x 2440 mm (96 in) nominal length\u003c\/li\u003e\n  \u003cli\u003eCovers many GM trucks, SUVs, vans and older cars (range 1983–2014 across models listed)\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with selected Ford, Mercedes-Benz, Land Rover and Isuzu applications\u003c\/li\u003e\n  \u003cli\u003eVehicle-specific fit — verify against OEM part number or existing belt dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits can I expect from this Bando serpentine belt?\u003c\/h3\u003e\n\u003cp\u003eThis belt’s EPDM composition and reinforced tensile cords help it resist heat, cracking and permanent stretch, which maintain tension and reduce slippage over time. The precise rib profile contributes to quieter operation and improved power transfer to alternators, A\/C compressors and other accessories.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved heat and ozone resistance compared with older rubber compounds\u003c\/li\u003e\n  \u003cli\u003eReduced elongation for longer service intervals and stable tension\u003c\/li\u003e\n  \u003cli\u003eQuieter running due to accurate rib-to-pulley contact\u003c\/li\u003e\n  \u003cli\u003eManufactured under high-quality controls used for OEM supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I confirm and install the correct replacement belt?\u003c\/h3\u003e\n\u003cp\u003eBefore purchasing, compare the 6PK2440 belt length and rib count to the belt removed from the vehicle or to the OEM part number. Installation typically requires releasing the belt tensioner and routing the new belt to match the factory routing diagram; if you’re unsure, a professional mechanic or a service manual will ensure correct tension and alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch rib count (6) and length (2440 mm \/ 96 in) to old belt or OEM reference\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys and tensioner for wear before installing new belt\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle-specific routing diagram and torque specifications\u003c\/li\u003e\n  \u003cli\u003eConsider professional installation for complex accessory layouts or tight engine compartments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Bando USA 6PK2440 is aimed at owners and technicians maintaining older domestic trucks, SUVs and select import cars who need a high-quality, OEM-equivalent replacement belt. It’s well suited for those who value factory-level fit, extended service life and quiet operation without stepping up to specialty aftermarket drive systems. Ideal users include independent repair shops, DIY enthusiasts comfortable with belt replacement, and fleet managers seeking consistent, OEM-grade parts for routine service.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 6PK2440 a direct OEM-equivalent replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — Bando manufactures this belt to OEM-grade specifications with precision-ground ribs and EPDM compound for equivalent fit and performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I verify this belt fits my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare the belt’s 6 ribs and 2440 mm (96 in) length to your old belt or check your vehicle’s OEM part number and fitment list.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55166992810327,"sku":"B000CAXI9I","price":37.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-usa-6pk2440-front-packaging.jpg?v=1790374674"},{"product_id":"bando-usa-serpentine-belt-6pk2325-oem-fit-epdm-run-quiet-double-ground-ribs","title":"Bando USA serpentine belt 6PK2325 — OEM-fit EPDM, Run Quiet, double-ground ribs","description":"\u003cp\u003e\u003cstrong\u003eBando USA 6PK2325 is an OEM-quality serpentine belt engineered from EPDM rubber and precision-ground ribs to match factory fit and long-lasting performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBando has spent more than a century producing rubber drive components and supplies OEM belts to many of the world’s leading automakers. The 6PK2325 serpentine belt is built to the same tight tolerances Bando uses for factory parts: EPDM compound for heat and wear resistance, strong tensile cords to resist stretch, and a double ground rib profile that follows OEM shape and dimensions. This belt is intended for drivers who need a reliable replacement that mirrors factory standards without compromise.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this belt match OEM fit and function?\u003c\/h3\u003e\n\u003cp\u003eThe 6PK2325 is manufactured using processes that reproduce the exact rib geometry and dimensions required by vehicle makers. Instead of casting belts from molds with looser tolerances, Bando precision-grinds the ribs twice to meet original-spec profiles. The result is consistent pulley engagement, correct alignment, and predictable tension behavior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwice ground rib profile for accurate OEM geometry\u003c\/li\u003e\n  \u003cli\u003eEPDM compound formulated to OEM temperature and wear specs\u003c\/li\u003e\n  \u003cli\u003eHigh-strength tensile cords to prevent elongation under load\u003c\/li\u003e\n  \u003cli\u003eProduced to the same quality standards used for factory-supplied belts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and technologies improve durability and noise?\u003c\/h3\u003e\n\u003cp\u003eBando combines EPDM rubber with proprietary Run Quiet technology and reinforced cords to extend service life and reduce operational noise. EPDM resists heat and ozone better than traditional rubber, while the Run Quiet compound improves grip and minimizes slip-related squeal. Reinforced cords carry load without stretching, maintaining tension and accessory drive timing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEPDM rubber for greater heat, ozone, and wear resistance\u003c\/li\u003e\n  \u003cli\u003eRun Quiet formulation reduces belt noise and slippage\u003c\/li\u003e\n  \u003cli\u003eRobust tensile cords support high horsepower demands without elongation\u003c\/li\u003e\n  \u003cli\u003ePrecision compounding for consistent wear characteristics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles does the 6PK2325 fit?\u003c\/h3\u003e\n\u003cp\u003eThe 6PK2325 covers a broad range of domestic and import models, including sedans, trucks, and SUVs from major manufacturers. Bando lists compatibility across many Chevrolet, GMC, Buick, Ford, Dodge, Jeep, Lincoln, Mercury, Pontiac, Saab and Isuzu model years. Always cross-check part numbers and engine options against your vehicle’s OEM specifications before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuick Lucerne (2006–2008), Regal (1999–2002)\u003c\/li\u003e\n  \u003cli\u003eChevrolet Camaro (1987), Colorado (2004–2012), Impala (2000–2002)\u003c\/li\u003e\n  \u003cli\u003eGMC Envoy\/Canyon (2003–2012), Hummer H3\/H3T (2006–2010)\u003c\/li\u003e\n  \u003cli\u003eDodge Dakota (1997–2002), Ford Crown Victoria\/Lincoln Town Car (2000–2002)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I choose and install a replacement belt?\u003c\/h3\u003e\n\u003cp\u003eConfirm the 6PK2325 matches your vehicle’s specified belt length and rib count using OEM cross-reference tools or your owner’s manual. Inspect pulleys, tensioner, and idlers for wear; replacing a worn tensioner at the same time improves belt life. If you’re comfortable with basic engine work, belt replacement is typically straightforward, but professional installation ensures correct routing and tension.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify part number against OEM cross-reference before ordering\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys and tensioner; replace worn components together\u003c\/li\u003e\n  \u003cli\u003eFollow correct routing and torque specifications during installation\u003c\/li\u003e\n  \u003cli\u003eConsider shop installation if unfamiliar with belt systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Bando USA 6PK2325 is ideal for vehicle owners, mechanics, and fleet managers seeking a direct-fit replacement that meets factory-level standards without paying OEM dealer premiums. It suits drivers who prioritize longevity, quiet operation, and accurate pulley engagement across a wide range of domestic and import models. If you need an aftermarket belt manufactured to the same specifications used for original equipment, this Bando serpentine belt is built for that purpose.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 6PK2325 an exact OEM replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 6PK2325 is manufactured to OEM-grade standards with twice-ground ribs and EPDM compound to match factory fit and performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Should I replace the tensioner when installing this belt?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It's recommended to inspect and often replace worn tensioners or idlers to ensure proper belt tension and maximize longevity.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55167074894167,"sku":"B000CB0KM0","price":36.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-usa-6pk2325-front-packaging.jpg?v=1790376571"},{"product_id":"bando-usa-serpentine-belt-6pk2240-14-3-x-3-8-x-1-in-oem-quality-epdm-heat-resistant-long-life-replacement","title":"Bando USA serpentine belt 6PK2240 14.3 x 3.8 x 1 in — OEM-quality EPDM, heat‑resistant long-life replacement","description":"\u003cp\u003e\u003cstrong\u003eBando USA 6PK2240 is an OEM-quality EPDM serpentine belt engineered to match factory fit and deliver long-life, heat-resistant performance for compatible cars and light trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt by Bando — a century-old belt manufacturer that supplies major automakers — this 6PK2240 serpentine belt is precision ground to meet OEM rib profile specifications and constructed from EPDM rubber for improved heat tolerance and longer service life. Its reinforced tensile cords help the belt resist stretching under high loads, while the exact rib grinding provides reliable engagement with pulleys and accessories. Use this belt as a direct replacement where the 14.3 x 3.8 x 1 inch size and vehicle fit list match your application.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles does the 6PK2240 fit?\u003c\/h3\u003e\n\u003cp\u003eThe 6PK2240 is specified for a wide range of domestic, import, and light-truck applications across Chevrolet, Ford, GMC, Jeep, Toyota, Lexus, Mazda, Mercedes-Benz and more. Always verify the size and OEM part cross-reference for your particular engine and model year before purchase. If your vehicle appears in the fit list provided with the product, this Bando belt is manufactured to the same quality standards used for original equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet: Corvette 1984, Malibu 2004–2006, Tahoe 1997\u003c\/li\u003e\n  \u003cli\u003eDodge\/Ram: Dakota 2000–2003, Durango 2000–2003, Ram 1500 2002–2003\u003c\/li\u003e\n  \u003cli\u003eFord\/GMC\/Jeep: Explorer\/Ranger model ranges, GMC C\/K truck and Suburban years listed\u003c\/li\u003e\n  \u003cli\u003eImport \u0026amp; luxury: Lexus (LS, GS, GX, LX series), Toyota 4Runner\/Sequoia\/Tundra, Mazda B-series\/Miata, Mercedes C-class AMG\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Bando construction improve durability?\u003c\/h3\u003e\n\u003cp\u003eBando uses EPDM rubber compounds and multiple precision grinding steps to achieve consistent rib geometry and improved wear life versus molded belts. EPDM resists heat and ozone better than older compounds, which reduces cracking and glazing in severe conditions. Reinforced tensile cords carry torque loads while minimizing elongation over service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEPDM compound for enhanced heat and ozone resistance\u003c\/li\u003e\n  \u003cli\u003eTwice-ground ribs for exact OEM profile and smoother pulley contact\u003c\/li\u003e\n  \u003cli\u003eHigh-strength tensile cords to prevent stretching under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the performance and installation considerations?\u003c\/h3\u003e\n\u003cp\u003eThis belt is designed to be a direct replacement where dimensions and pulley layout match; proper tension and alignment during installation are essential for optimal life. Check pulleys, tensioners, and accessory bearings for wear before fitting a new belt to prevent premature failure. Follow vehicle-specific torque and tensioner adjustment procedures in the repair manual.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm belt length and rib count for your engine configuration\u003c\/li\u003e\n  \u003cli\u003eInspect tensioner and pulley condition prior to installation\u003c\/li\u003e\n  \u003cli\u003eReplace with OEM-spec routing and tension settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this Bando belt compare to aftermarket alternatives?\u003c\/h3\u003e\n\u003cp\u003eBando produces belts for both OEM and aftermarket channels but holds all production to a single premium standard, meaning this belt mirrors the build quality supplied to many automakers. Molded belts can differ in rib profile and compound uniformity compared with Bando’s ground-rib EPDM construction, which may affect fit and long-term wear. Choosing an OEM-grade belt helps ensure consistent performance on high-load, modern accessory drives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle premium manufacturing standard across OEM and aftermarket lines\u003c\/li\u003e\n  \u003cli\u003eGround-rib process for precise profile and smoother operation\u003c\/li\u003e\n  \u003cli\u003eBacked by decades of global production and automaker supply experience\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Mechanics, fleet managers, and DIY owners seeking a reliable OEM-quality serpentine belt for compatible Chevrolet, Ford, GMC, Jeep, Lexus, Toyota, Mazda, Mercedes and other listed vehicles. It's aimed at anyone replacing a worn or damaged accessory belt who wants a factory-like fit, superior heat resistance, and reduced risk of premature stretching or rib wear. Confirm fitment against your vehicle’s part number and engine layout before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 6PK2240 an exact OEM replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—Bando manufactures this belt to OEM-quality standards with ground ribs and EPDM compound to match factory fit and performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm this belt fits my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare the belt dimensions and the vehicle fit list or cross-reference your OEM part number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bando USA","offers":[{"title":"Default Title","offer_id":55167075058007,"sku":"B000CAYTGE","price":38.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bando-usa-6pk2240-front-packaging.jpg?v=1790376571"}],"url":"https:\/\/britishgarage.co.uk\/collections\/bando-usa.oembed","provider":"British Garage","version":"1.0","type":"link"}