{"title":"BILITOOLS","description":"\u003cp\u003eBrowse 61 BILITOOLS products at British Garage, including engine tools, steering \u0026amp; suspension tools and brake tools. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked UK delivery on every order and 30-day returns.\u003c\/p\u003e","products":[{"product_id":"bilitools-helicoil-thread-repair-kit-m7x1-0-metric-m7-insert-kit-with-hss-drill-304-stainless-inserts","title":"BILITOOLS Helicoil Thread Repair Kit M7x1.0 — Metric M7 Insert Kit with HSS Drill \u0026 304 Stainless Inserts","description":"\u003cp\u003e\u003cstrong\u003eThe BILITOOLS M7x1.0 Helicoil Thread Repair Kit is a complete metric thread restoration set that replaces damaged M7x1.0 internal threads with durable 304 stainless inserts for long-lasting, high-torque repairs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit equips mechanics, hobbyists, and tradespeople with the drill, tap, installation tools, and stainless steel coil inserts needed to restore stripped or worn threads in metals, composites, and polymers. All components are organized in a sturdy iron case for easy transport and repeatable results on automotive, plumbing, and general repair tasks.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the kit restore stripped M7x1.0 threads?\u003c\/h3\u003e\n\u003cp\u003eThe kit restores stripped threads by drilling out the damaged thread, tapping a new oversize thread, and inserting a stainless-steel helicoil that provides a fresh, factory-fit internal thread. The included break-off tang system secures the insert and then removes cleanly after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHSS drill sized for precise hole preparation\u003c\/li\u003e\n  \u003cli\u003eTap to cut the new thread for the insert\u003c\/li\u003e\n  \u003cli\u003e304 stainless coil inserts replace the worn threads\u003c\/li\u003e\n  \u003cli\u003eBreak pin tool removes the installation tang cleanly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and applications is this suitable for?\u003c\/h3\u003e\n\u003cp\u003eThe M7x1.0 kit is made to work across a wide range of base materials, including ferrous and non-ferrous metals, composites, and many polymers. It’s commonly used in automotive engine components, plumbing fittings, machinery housings, and any repair where original threads have failed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with steel, aluminum, brass, and composite housings\u003c\/li\u003e\n  \u003cli\u003eIdeal for engine blocks, valve bodies, and threaded fittings\u003c\/li\u003e\n  \u003cli\u003eWorks in both workshop and field service environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and how does it make repairs easier?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains the essential tools and a selection of inserts so you can complete a repair without sourcing parts separately. Organizing everything in an iron case reduces setup time, protects cutting edges, and keeps small inserts and tools ready for the next job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHSS drill and matching tap for the M7x1.0 insert size\u003c\/li\u003e\n  \u003cli\u003e304 stainless helicoil inserts for durable threads\u003c\/li\u003e\n  \u003cli\u003eInstallation tool and break pin removal tool included\u003c\/li\u003e\n  \u003cli\u003eIron case with designated slots for each component\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The BILITOOLS M7x1.0 Helicoil kit is aimed at professional mechanics, maintenance technicians, DIY enthusiasts, and plumbers who need a reliable way to repair stripped metric threads without replacing whole parts. If you service engines, fixtures, or assemblies where thread strength matters, this kit lets you restore components to a stronger-than-original condition using corrosion-resistant stainless inserts and high-performance HSS cutting tools.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this kit on aluminum engine blocks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit’s HSS drill, tap, and 304 stainless inserts are suitable for aluminum and commonly used for engine block thread repairs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include installation and tang removal tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes an installation tool and a break pin tool to set and remove the tang from inserted coils.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55160998363479,"sku":"B09WN5MS7W","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-m7x1-0-kit-case-front.jpg?v=1790320422"},{"product_id":"bilitools-brake-caliper-compression-tool-piston-compressor-29-9mm-swivel-forged-45-carbon-steel","title":"BILITOOLS Brake Caliper Compression Tool Piston Compressor 29.9mm Swivel, Forged 45# Carbon Steel","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS Brake Caliper Compression Tool is a heavy‑duty piston spreader designed to quickly and evenly push brake caliper pistons back for pad replacement on most cars and light trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you change brake pads or work on calipers, a reliable piston compressor saves time and prevents damage to pistons and seals. The BILITOOLS caliper compression tool is forged from 45# carbon steel with a solid swivel joint and multi‑force options, built to withstand repeated use while giving precise, uniform pressure. Its ergonomic pentagonal knob and compatibility with a 10mm wrench make it adaptable for both hand‑driven and wrench-assisted compression, so you can complete brake jobs with less effort and more control.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tool make brake pad replacement easier?\u003c\/h3\u003e\n\u003cp\u003eThe tool compresses the caliper piston evenly, creating the clearance needed to install thicker, new brake pads without forcing or twisting the caliper. Its smooth threads and solid swivel head allow steady, controlled movement so pads seat correctly and seals remain intact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEven piston travel from the 29.9mm solid swivel joint\u003c\/li\u003e\n  \u003cli\u003eSmoother operation thanks to complete, regular screw threads\u003c\/li\u003e\n  \u003cli\u003ePentagonal knob for comfortable hand turning or use with a 10mm wrench\u003c\/li\u003e\n  \u003cli\u003eReduces risk of stuck or damaged pistons during installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and piston types will this spreader work with?\u003c\/h3\u003e\n\u003cp\u003eDesigned for broad compatibility, this compressor fits most domestic and imported passenger cars and light trucks. It handles standard single‑piston calipers and many compact multi‑piston designs where rear clearance and rotational alignment are not required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for most single‑piston calipers on cars and light trucks\u003c\/li\u003e\n  \u003cli\u003eWorks with a range of piston diameters commonly used in OEM brake systems\u003c\/li\u003e\n  \u003cli\u003eCompact profile for access in tighter wheel wells\u003c\/li\u003e\n  \u003cli\u003eNot intended for complex rear parking‑brake calipers that require rotation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and features ensure durability and precision?\u003c\/h3\u003e\n\u003cp\u003eBuilt from 45# carbon steel, the tool resists wear and corrosion while providing the stiffness required for repeated compression tasks. The precision‑formed threads and solid swivel joint translate hand force into smooth, even piston movement without binding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForged 45# carbon steel body for long service life\u003c\/li\u003e\n  \u003cli\u003eSolid 29.9mm swivel joint gives uniform pressure distribution\u003c\/li\u003e\n  \u003cli\u003ePentagonal knob is burr‑free for safer handling\u003c\/li\u003e\n  \u003cli\u003eCan be driven by hand or with a 10mm wrench for added leverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do you use the BILITOOLS piston compressor safely and effectively?\u003c\/h3\u003e\n\u003cp\u003ePosition the tool so the swivel head bears squarely on the piston face and the frame rests against the caliper housing. Turn the knob or use a 10mm wrench slowly until the piston retracts to the required position, then install the new pads and reassemble the caliper.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean piston and surrounding area before compression\u003c\/li\u003e\n  \u003cli\u003eCenter swivel on piston to avoid off‑angle force\u003c\/li\u003e\n  \u003cli\u003eCompress gradually and watch seal movement to avoid damage\u003c\/li\u003e\n  \u003cli\u003eUse 10mm wrench for stubborn pistons or to reduce hand fatigue\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The BILITOOLS Brake Caliper Compression Tool is aimed at DIY mechanics, professional technicians, and fleet maintenance staff who need a durable, simple, and effective tool for routine brake pad changes. If you service passenger cars or light trucks and want a solid, long‑lasting piston spreader that combines precision with an option for added leverage, this tool is designed to make those jobs faster and more reliable.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this tool work on rear calipers with integrated parking brake?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It’s intended for standard pistons. Rear calipers that require piston rotation for the parking brake need a specialized rotating tool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use a wrench with this spreader?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The pentagonal knob accepts a 10mm wrench for extra leverage and reduced hand strain.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55161065308503,"sku":"B0B8MN5C72","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-caliper-tool-front-view.jpg?v=1790321647"},{"product_id":"bilitools-bearing-race-seal-driver-set-43-piece-sae-metric-kit-with-aluminum-adapters","title":"BILITOOLS Bearing Race \u0026 Seal Driver Set, 43-Piece SAE \u0026 Metric Kit with Aluminium Adapters","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS 43-piece Bearing Race and Seal Driver Set is a complete SAE and metric adapter kit with four driver handles for accurate, damage-free installation of bearing races and seals.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis professional-grade kit brings a broad range of adapter sizes and a compact storage case to mechanics, fabricators, and DIYers. With color-coded, dual-sided aluminum alloy adapters and four handles, the set is built to speed up repetitive tasks while minimizing marring to components. It covers common automotive and industrial diameters so you can match the correct driver for a straight, even press every time.\u003c\/p\u003e\n\n\u003ch3\u003eHow do the adapters reduce installation damage?\u003c\/h3\u003e\n\u003cp\u003eThe adapters feature two working faces: a flat side for seals and a tapered side for bearing races. Using the matching diameter and the right side prevents leaning or cocking during installation, which reduces deformation of seals and races.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-sided adapters: flat for seals, tapered for races\u003c\/li\u003e\n  \u003cli\u003eClear size markings and color coding for quick selection\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy construction minimizes impact marring compared with softer metals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes are included and will it fit my project?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains 39 adapters covering a wide range of SAE and metric inner‑to‑outer diameters plus four driver handles. The SAE adapters span many fractional sizes, while the metric group covers common millimeter ranges, making the set versatile for small engines, wheel hubs, transmissions, and general machinery work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e16 SAE adapter pairs covering commonly used fractional diameters\u003c\/li\u003e\n  \u003cli\u003e23 metric adapter pairs spanning 10 mm up to the mid‑70 mm range\u003c\/li\u003e\n  \u003cli\u003eFour drivers to pair with adapters for different reach and leverage needs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the driver handles and adapters safely?\u003c\/h3\u003e\n\u003cp\u003eSelect the adapter that most closely matches the component diameter, attach it to a handle, and seat it squarely against the race or seal. Use measured taps from a rubber mallet to work the part into place; avoid excessive force and check alignment frequently.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChoose adapter side: flat for seals, tapered for races\u003c\/li\u003e\n  \u003cli\u003eAttach to a driver handle and align perpendicular to the part\u003c\/li\u003e\n  \u003cli\u003eTap with a rubber mallet in short, controlled strikes until seated\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the set convenient to store and identify on the bench?\u003c\/h3\u003e\n\u003cp\u003eThe adapters are machined with visible size markings and color-coded by system, so you can find the right piece quickly. All 43 items fit inside a fitted case that keeps drivers and adapters organized, portable, and protected from workshop grit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSize markings on each adapter for immediate identification\u003c\/li\u003e\n  \u003cli\u003eColor coding separates SAE (black) and metric (red) adapters visually\u003c\/li\u003e\n  \u003cli\u003eDurable storage case keeps parts organized and easy to transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: this BILITOOLS driver set suits professional mechanics, restoration hobbyists, and home garage users who need a comprehensive, portable solution for installing bearing races and seals without damaging parts. It’s aimed at anyone performing brake, wheel hub, transmission, differential, or small‑engine work who wants reliable size coverage, repeatable results, and tidy bench organization.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this set include both SAE and metric sizes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit contains 16 SAE adapter sizes and 23 metric adapter sizes, covering a broad range of diameters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these with a hammer or should I use a press?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use short, controlled rubber mallet taps with the drivers; for delicate jobs a press can be used but alignment remains essential.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55161241928023,"sku":"B0C1NF5GRK","price":111.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-packaging.jpg?v=1790322977"},{"product_id":"bilitools-transmission-fluid-pump-8l-air-operated-with-15-atf-adapters-pressure-gauge","title":"BILITOOLS Transmission Fluid Pump 8L Air-Operated with 15 ATF Adapters, Pressure Gauge","description":"\u003cp\u003e\u003cstrong\u003eThe BILITOOLS 8L air-operated transmission fluid pump is a two-way filling and extraction system with a pressure gauge and 15 ATF adapters for fast, shop-grade transmission service.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, workshop-ready unit combines pneumatic power with a transparent 8-liter reservoir and a stable wide base so you can both remove old fluid and refill transmissions, differentials, or transfer cases without lifting a car or guessing fluid level. It ships with a full hose kit, a safety relief valve, and a set of metal adapters that fit many European and domestic fill ports—designed to speed routine service and reduce spills.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the two-way fill and extraction mode work?\u003c\/h3\u003e\n\u003cp\u003eThe pump switches between dispensing and vacuum extraction using a simple control plug—insert and tighten for pumping fluid into a system, remove to let it draw fluid out. Air power drives the internal mechanism for steady flow and the included pressure gauge shows system status while the safety valve prevents over-pressurization.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-way control plug for quick mode changes\u003c\/li\u003e\n  \u003cli\u003eAir-operated drive for consistent flow and suction\u003c\/li\u003e\n  \u003cli\u003eBuilt-in pressure gauge and safety relief valve\u003c\/li\u003e\n  \u003cli\u003eSemi-transparent graduated tank for easy fluid monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and ports do the 15 ATF adapters fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains 15 metal ATF filler adapters sized for common OEM transmission and transfer-case fill ports across BMW, VW, Audi, Porsche, Mercedes-Benz, Ford, Honda, and other makes. These adapters let you reach no-dipstick or hard-to-access fill locations and create a secure connection for cleaner service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e15 metal adapters covering many European and domestic models\u003c\/li\u003e\n  \u003cli\u003eAdapters help seal hard-to-reach fill ports without leaks\u003c\/li\u003e\n  \u003cli\u003eSuitable for no-dipstick transmissions and tight service points\u003c\/li\u003e\n  \u003cli\u003eDurable metal construction for repeated professional use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hoses and accessories come with the pump, and how are they used?\u003c\/h3\u003e\n\u003cp\u003eThe unit includes a 60\" main dispensing hose with control valve and quick connector plus three extraction hoses (39\" at 6, 8, and 10 mm) and a 39\" brake-bleeding hose. The removable cover opens with the supplied wrench for direct filling and internal cleaning; check and tighten the air fitting before first use and add sealing tape if needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e60\" main hose with valve for controlled dispensing\u003c\/li\u003e\n  \u003cli\u003eThree extraction hoses (6, 8, 10 mm) for varied ports\u003c\/li\u003e\n  \u003cli\u003e39\" brake-bleeding hose for brake system use\u003c\/li\u003e\n  \u003cli\u003eRemovable cover and wrench for refill and cleaning access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the pump improve safety and accuracy during transmission service?\u003c\/h3\u003e\n\u003cp\u003eThe pressure gauge lets you monitor system pressure in real time while the safety valve releases excess pressure if needed. The wide, upgraded base reduces tipping risk during operation and the graduated semi-transparent reservoir shows fluid volume so you can stop at the correct fill level.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReal-time pressure monitoring with built-in gauge\u003c\/li\u003e\n  \u003cli\u003eSafety relief valve prevents over-pressurization\u003c\/li\u003e\n  \u003cli\u003eStable wide base reduces tipping while dispensing\u003c\/li\u003e\n  \u003cli\u003eGraduated reservoir simplifies accurate fluid measurement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS 8L Transmission Fluid Pump is aimed at independent mechanics, home enthusiasts who perform their own service, and small shops that need a portable, efficient tool for transmission, differential, and transfer-case fluid changes. It’s especially useful when working on vehicles without dipsticks or when access is limited and a clean, controlled fill and extraction method is required.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this pump extract and refill transmissions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the two-way system switches between extraction and dispensing using the control plug for both removing old fluid and refilling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included adapters compatible with my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes 15 metal ATF adapters for many BMW, VW, Audi, Porsche, Mercedes, Ford, and Honda models; check port size compatibility before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55161249399127,"sku":"B0BN342TMR","price":151.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-view-8l-transmission-pump.jpg?v=1790323171"},{"product_id":"bilitools-adjustable-oil-filter-wrench-1-2-drive-auto-clamp-spring-60-80mm-120-nm-torque","title":"BILITOOLS Adjustable Oil Filter Wrench 1\/2\" Drive Auto-Clamp Spring, 60–80mm, 120 Nm Torque","description":"\u003cp\u003e\u003cstrong\u003eThe BILITOOLS Universal Adjustable Oil Filter Wrench is a spring-actuated, 1\/2\" drive tool that automatically clamps and removes or installs oil filters 2.36–3.15 inches in diameter.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you change oil filters yourself or work in a garage, this compact wrench combines a 1\/2\" square drive with an auto-clamp spring and hardened teeth to give a secure grip in tight spaces. Crafted from 40# carbon steel, it supports up to 120 Nm of torque and adapts to different filter sizes, making it useful for many passenger cars, light trucks and motorcycles.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the auto-clamp spring make filter removal easier?\u003c\/h3\u003e\n\u003cp\u003eThe built-in spring mechanism instantly adjusts the claws around the filter so you don't have to fiddle with manual positioning. As you begin turning, the spring tightens the grip and the two precision-cut teeth reduce slipping, letting you transfer torque smoothly from your ratchet or torque wrench to the filter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomatically tightens claws to match filter diameter\u003c\/li\u003e\n  \u003cli\u003eTwo specialized teeth bite the filter for less slippage\u003c\/li\u003e\n  \u003cli\u003eWorks in confined engine bays where hand access is limited\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and torque does this wrench support?\u003c\/h3\u003e\n\u003cp\u003eThis adjustable oil filter wrench fits filters with external diameters from 2.36 inches (60 mm) up to 3.15 inches (80 mm). It accepts a standard 1\/2\" drive so you can use any compatible ratchet or torque wrench and is rated for a maximum torque of 120 Nm, suitable for common automotive service needs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible filter diameters: 2.36\"–3.15\" (60–80 mm)\u003c\/li\u003e\n  \u003cli\u003eDrive type: 1\/2\" square, compatible with ratchets and torque wrenches\u003c\/li\u003e\n  \u003cli\u003eMaximum recommended torque: 120 Nm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and design features improve durability and grip?\u003c\/h3\u003e\n\u003cp\u003eThe tool is constructed from 40# carbon steel for strength and long life under repeated use. The claws are shaped with two specially-designed teeth that increase contact and reduce slippage, while the spring and pivot points are engineered to maintain consistent clamping force through many cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e40# carbon steel body resists bending and wear\u003c\/li\u003e\n  \u003cli\u003ePrecision-cut teeth for reliable contact with filter shells\u003c\/li\u003e\n  \u003cli\u003eRobust spring and pivot design for consistent clamping action\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this wrench in tight engine bays or on odd-shaped filters?\u003c\/h3\u003e\n\u003cp\u003eYes — the compact claw design and automatic adjustment make it useful in cramped locations where strap or cup wrenches won't fit. While it excels on standard cylindrical filters, textured or heavily corroded canisters may still require additional techniques like applying penetrating oil or a different removal method.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact profile fits into restricted spaces under hoods and frames\u003c\/li\u003e\n  \u003cli\u003eAuto-clamp adapts to uneven surfaces and minor deformities\u003c\/li\u003e\n  \u003cli\u003eMay be paired with penetrating lubricant for stubborn, rusted filters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS Universal Adjustable Oil Filter Wrench is aimed at DIY home mechanics, mobile technicians and shop professionals who need a reliable, quick-fitting tool for common external oil filters. It’s a practical addition for anyone who uses a 1\/2\" drive ratchet or torque wrench and wants an easy-to-store, durable wrench that handles a range of 60–80 mm (2.36–3.15\") filter sizes without manual readjustment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What filter diameters does this wrench fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits external oil filters from 2.36\" to 3.15\" (60–80 mm).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use a torque wrench with it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it has a 1\/2\" drive and is rated up to 120 Nm for safe torque use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55161937592663,"sku":"B0B616T1BJ","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-view-wrench.jpg?v=1790333858"},{"product_id":"bilitools-5-16-18-thread-repair-kit-sae-helicoil-hss-drill-304-stainless-inserts-in-iron-case","title":"BILITOOLS 5\/16-18 Thread Repair Kit – SAE Helicoil HSS Drill \u0026 304 Stainless Inserts in Iron Case","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS 5\/16-18 HSS Helicoil Thread Repair Kit is a complete SAE thread-restoration set designed to repair stripped or damaged internal threads and install durable 304 stainless inserts for stronger, longer-lasting threads.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're fixing a stripped bolt hole in an engine block, renewing threads in a plumbing fitting, or reinforcing fasteners in softer metals, this kit brings the drill, tap, installation tools, and stainless-steel Helicoil-style inserts needed to restore function quickly. All components are arranged in a compact iron case so you can carry the set to the shop or a job site and keep pieces organized between jobs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit restore stripped or damaged threads?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit follows a standard thread-repair workflow: drill out the damaged thread to the correct diameter, tap a new thread sized for the insert, install a corrosion-resistant 304 stainless insert, and remove the installation tang to leave a proper internal thread. The included HSS drill and tap are ground with a 135° apex for aggressive cutting and efficient penetration through most materials.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHSS drill matched to 5\/16-18 SAE repair size for clean removal of damaged material.\u003c\/li\u003e\n  \u003cli\u003ePrecision tap to cut the new internal thread for the insert.\u003c\/li\u003e\n  \u003cli\u003e304 stainless inserts restore thread strength and resist corrosion.\u003c\/li\u003e\n  \u003cli\u003eInstallation tool and break-off pin tool make insert seating and tang removal straightforward.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and applications are supported by this repair set?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit is suitable for use in metals, composites, and many polymers, making it versatile for automotive, plumbing, machinery, and general maintenance work. The 304 stainless inserts are particularly useful when you need increased torque capacity or improved wear resistance in weaker base materials.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAutomotive: engine blocks, cylinder heads, intake manifolds.\u003c\/li\u003e\n  \u003cli\u003ePlumbing: metal pipe fittings and threaded housings.\u003c\/li\u003e\n  \u003cli\u003eIndustrial: machinery frames, gear housings, and soft-metal mounts.\u003c\/li\u003e\n  \u003cli\u003eHobby and repair: marine, lawn equipment, and household hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and parts come in the kit, and how are they organized?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit arrives as a curated set of essential tools and inserts for the 5\/16-18 SAE size, packed into a durable iron case. Everything you need for a complete repair job is included so you don’t have to source individual components separately.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-speed steel (HSS) drill with 135° apex for efficient cutting.\u003c\/li\u003e\n  \u003cli\u003eTap sized to accept the stainless thread insert for reliable seating.\u003c\/li\u003e\n  \u003cli\u003e304 stainless helicoil-style thread inserts for durable internal threads.\u003c\/li\u003e\n  \u003cli\u003eInstallation tool, break-off pin tool, and organized iron storage case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I choose the right size and prepare before buying?\u003c\/h3\u003e\n\n\u003cp\u003eConfirm the existing fastener size and thread pitch to ensure compatibility with the 5\/16-18 SAE specification in this set. If you’re unsure which size you need, consult the kit’s diagram (refer to picture 6 in product images) or measure the fastener and thread pitch before purchase to avoid mismatches.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMeasure bolt diameter and count threads per inch (TPI) to verify 5\/16-18 fit.\u003c\/li\u003e\n  \u003cli\u003eUse the diagram included in the product images for guidance on sizing and installation steps.\u003c\/li\u003e\n  \u003cli\u003ePre-clean the damaged hole to remove debris, oils, and corrosion for best results.\u003c\/li\u003e\n  \u003cli\u003eWork slowly through drill and tap steps to avoid over-removing base material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS 5\/16-18 HSS Helicoil Thread Repair Kit is aimed at professional mechanics, maintenance technicians, and hobbyists who regularly encounter stripped or worn internal threads and need a reliable, portable solution. If you work on cars, machines, plumbing, or metal assemblies where restored torque capacity and corrosion resistance matter, this set provides the tools and stainless-steel inserts required for professional-grade repairs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit work for aluminum and cast iron?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The HSS drill and tap plus 304 stainless inserts are suited for aluminum, cast iron, and many other metals and composites.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include the installation and tang-break tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The set includes an install tool and a break pin tool to seat inserts and remove tangs for finished threads.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55161972883799,"sku":"B09WN6M8VN","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-open-case.jpg?v=1790334354"},{"product_id":"bilitools-33mm-3-4-drive-deep-impact-socket-cr-mo-black-phosphate-6-point-heavy-duty-axle-nut","title":"BILITOOLS 33mm 3\/4\" Drive Deep Impact Socket — CR-MO Black Phosphate, 6‑Point Heavy‑Duty Axle Nut","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS 33mm 3\/4\" drive deep impact socket is a heavy-duty CR-MO axle nut socket engineered to remove large fasteners with a 6-point design for secure, high-torque performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're servicing commercial vehicles, tractors, ATVs, or tackling demanding shop repairs, this 33mm deep impact socket offers the strength and fit needed for large axle nuts and heavy fasteners. Forged from chromium-molybdenum steel and finished in black phosphate, the socket resists wear and corrosion while delivering dependable performance when used with 3\/4\" drive impact tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this socket handle high-torque jobs?\u003c\/h3\u003e\n\u003cp\u003eThe CR-MO construction and impact grade heat treatment let the socket withstand the shock loads from impact wrenches without cracking or deforming. The black phosphate finish reduces corrosion so the tool keeps reliable engagement over repeated heavy use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForged chromium-molybdenum (CR-MO) steel for impact duty\u003c\/li\u003e\n  \u003cli\u003eHeat-treated to resist cracking under high torque\u003c\/li\u003e\n  \u003cli\u003eBlack phosphate finish for added corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eMeets or exceeds ANSI performance standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the 6-point design protect fasteners better than other sockets?\u003c\/h3\u003e\n\u003cp\u003eThe six-point geometry contacts fastener flats rather than corners, which reduces rounding and maximizes torque transfer. That makes it ideal for stubborn axle nuts and large bolts where secure, non-slip engagement matters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLarger contact surfaces to reduce fastener damage\u003c\/li\u003e\n  \u003cli\u003eBetter torque transfer minimizes tool kickback\u003c\/li\u003e\n  \u003cli\u003eLess risk of rounding or slipping under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this socket easy to identify and store in a busy workshop?\u003c\/h3\u003e\n\u003cp\u003eYes — the socket includes a color-coded hang tag for pegboard display or storage hooks, and laser-etched markings clearly show size and specifications for quick selection. The deep length also helps reach recessed nuts without disassembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eColor-coded hang tag for retail or shop organization\u003c\/li\u003e\n  \u003cli\u003eLaser-etched size markings for fast identification\u003c\/li\u003e\n  \u003cli\u003eDeep socket profile for recessed fasteners and axle nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and tasks is this socket best paired with?\u003c\/h3\u003e\n\u003cp\u003eThis 33mm socket is built for 3\/4\" drive impact wrenches and pneumatic tools commonly used in heavy automotive, agricultural, and industrial maintenance. It performs well on axle nuts, wheel hubs, and large machinery fasteners where robust impact-rated tools are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 3\/4\" drive impact wrenches and breakers\u003c\/li\u003e\n  \u003cli\u003eCommonly used on axle nuts, wheel bearings, and hub assemblies\u003c\/li\u003e\n  \u003cli\u003eSuited for fleet maintenance, heavy equipment, and agricultural repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians, professional mechanics, fleet maintenance crews, and serious DIYers who need a single, reliable 33mm impact-grade socket for heavy-duty fasteners will benefit most from the BILITOOLS 3\/4\" drive deep impact socket. If your work involves stubborn axle nuts, recessed fasteners, or repeated high-torque applications, this socket provides the strength, fit, and durability to perform consistently in demanding shop and field environments.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What drive size fits this 33mm socket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This socket is made for 3\/4\" drive impact tools and breakers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the socket suitable for impact wrenches?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It's impact-grade CR-MO steel, heat-treated for use with impact wrenches.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55162314424663,"sku":"B0DP22Y5WJ","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-33mm-front-view.jpg?v=1790335949"},{"product_id":"bilitools-m8x1-25-thread-repair-kit-hss-drill-304-stainless-helicoil-inserts-case","title":"BILITOOLS M8x1.25 Thread Repair Kit — HSS Drill, 304 Stainless Helicoil Inserts, Case","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS M8x1.25 Thread Repair Kit is a complete metric Helicoil-style set that restores stripped M8x1.25 internal threads using high-speed steel drills, taps and durable 304 stainless inserts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf a bolt no longer tightens because the thread in an engine block, housing or bracket is damaged, this kit gives you the tools to re-cut the hole to a prepared size and install a stainless threaded insert that restores full fastening strength. The set is designed for mechanics, fabricators and DIYers working with metals, composites and plastics and bundles all necessary components in a compact iron case for jobsite portability.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the kit repair a stripped M8x1.25 thread?\u003c\/h3\u003e\n\n\u003cp\u003eThe repair process removes the damaged thread profile, taps the hole to an oversize pilot, and installs a pre-wound stainless insert that provides new internal threads sized to accept an M8x1.25 bolt. Because the insert is made from 304 stainless steel it resists corrosion and distributes torque across the parent material.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUse the HSS drill to open the damaged hole to the correct repair diameter.\u003c\/li\u003e\n  \u003cli\u003eRun the included M8x1.25 tap to create the mating thread for the insert.\u003c\/li\u003e\n  \u003cli\u003eWind the 304 stainless insert into the tapped hole with the installation tool.\u003c\/li\u003e\n  \u003cli\u003eBreak the tang with the provided break pin tool to clear the bolt path.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included and why each matters?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit contains the essential drill, tap, multiple stainless inserts, an installation driver and a break tool, plus a sturdy case to keep everything organized. Each part performs a specific step in the repair sequence, ensuring a consistent, repeatable result compared with improvised methods.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHSS drill — 135° apex for efficient metal cutting and cleaner holes.\u003c\/li\u003e\n  \u003cli\u003eM8x1.25 tap — forms the correct thread to accept the insert securely.\u003c\/li\u003e\n  \u003cli\u003e304 stainless thread inserts — restore thread strength and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eInstallation and break tools — speed installation and remove the tang cleanly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich materials and applications is this repair kit suited for?\u003c\/h3\u003e\n\n\u003cp\u003eThe BILITOOLS kit works across a wide range of materials including steel, aluminum, most non-ferrous metals, composites and plastics. It’s commonly used in automotive repairs, plumbing fixtures, machinery maintenance and general metalworking where threaded holes are worn or stripped.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAutomotive: head bolts, engine mounts, transmission housings.\u003c\/li\u003e\n  \u003cli\u003ePlumbing and fittings: valves, flanges, and mounting brackets.\u003c\/li\u003e\n  \u003cli\u003eGeneral fabrication: repair of tapped holes in assemblies and fixtures.\u003c\/li\u003e\n  \u003cli\u003eSuitable for both shop and field repairs thanks to the iron storage case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long do the repaired threads last and what should I expect during installation?\u003c\/h3\u003e\n\n\u003cp\u003eWhen installed correctly, stainless inserts provide long-lasting, repeatable thread engagement that often outperforms the original worn thread, especially in softer base materials. Proper drill speed, lubrication on tougher metals, and using the correct tap alignment all improve the quality and longevity of the repair.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExpect increased thread longevity in weaker metals due to the insert strength.\u003c\/li\u003e\n  \u003cli\u003eFollow drill and tap size guidance for consistent fit and torque capacity.\u003c\/li\u003e\n  \u003cli\u003eUse cutting fluid on hardened materials to extend tool life and improve finishes.\u003c\/li\u003e\n  \u003cli\u003eKeep parts organized in the iron case to avoid lost inserts or tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS M8x1.25 Thread Repair Kit is built for professional mechanics, industrial maintenance technicians and serious DIYers who need a reliable, portable repair solution for M8x1.25 threaded holes. If you frequently work on engines, machinery, plumbing or metal assemblies and want a repeatable way to restore threads without replacing whole components, this kit equips you with the drill, tap, stainless inserts and installation tools to get the job done cleanly and efficiently.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit repair threads in aluminum engine blocks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 304 stainless inserts provide stronger threads in softer metals like aluminum when installed per instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many inserts are included and do they fit M8x1.25 bolts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes multiple M8x1.25 304 stainless inserts sized to accept standard M8x1.25 bolts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55162523943255,"sku":"B09WN4QTNL","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-case-front.jpg?v=1790337030"},{"product_id":"bilitools-3-8-16-thread-repair-kit-hss-drill-304-stainless-helicoil-inserts-iron-case","title":"BILITOOLS 3\/8-16 Thread Repair Kit — HSS Drill, 304 Stainless Helicoil Inserts, Iron Case","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS 3\/8-16 inch Thread Repair Kit is a complete HSS drill, tap, and 304 stainless Helicoil insert set for restoring stripped internal threads and rebuilding stronger, long-lasting fastener seats.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit brings together the essential tools needed to repair damaged 3\/8-16 SAE threads in engines, gearboxes, plumbing fittings, and metal assemblies. It combines high-speed-steel cutting tools, corrosion-resistant stainless wire inserts, and installation and break-off tools in a compact iron case so you can fix worn or stripped threads on the spot and restore full torque capability.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the BILITOOLS kit restore stripped threads?\u003c\/h3\u003e\n\u003cp\u003eThe set provides a step-by-step mechanical solution: drill to the right diameter, tap the larger Helicoil-compatible thread, insert a stainless coil, and break off the tang. That rebuilt insert forms a new internal thread that resists wear and allows secure bolt engagement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHSS drill for clean, accurate hole preparation.\u003c\/li\u003e\n  \u003cli\u003eTap sized for Helicoil installation to create the reception thread.\u003c\/li\u003e\n  \u003cli\u003e304 stainless wire inserts deliver corrosion resistance and durability.\u003c\/li\u003e\n  \u003cli\u003eInstallation tool aligns and seats inserts; break pin tool removes the tang.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich materials and applications are supported by this SAE Helicoil set?\u003c\/h3\u003e\n\u003cp\u003eThis 3\/8-16 kit is designed to work across a wide range of substrates, from soft aluminum engine blocks to tougher steels and non-metallic components. It’s suitable for automotive repairs, machinery maintenance, plumbing fixtures, and anywhere internal threads have been compromised.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with metals, composites, and some polymers.\u003c\/li\u003e\n  \u003cli\u003eCommonly used for engine head bolts, gearbox housings, and mounting brackets.\u003c\/li\u003e\n  \u003cli\u003eUseful for field repairs and shop routines where fast, durable thread restoration is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools come in the case and how are they organized?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives in a sturdy iron case with labeled compartments so each component stays organized and accessible. Tools include the precision drill, tap, a pack of stainless inserts, an installation driver, and the tang-break tool—everything needed for a single-size thread repair job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIron storage case for secure transport and on-site use.\u003c\/li\u003e\n  \u003cli\u003eHSS drill and 135° apex for efficient material penetration.\u003c\/li\u003e\n  \u003cli\u003eInstallation and break-pin tools engineered for correct seating and removal.\u003c\/li\u003e\n  \u003cli\u003eClear arrangement reduces setup time and risk of losing small parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS 3\/8-16 Thread Repair Kit is aimed at professional mechanics, maintenance technicians, and informed DIYers who need a reliable, single-size Helicoil solution. If you frequently encounter stripped internal threads in automotive or industrial equipment and want a corrosion-resistant, high-strength repair that restores torque capability, this kit gives you everything required to perform consistent, shop-quality thread restorations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit repair aluminum engine block threads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 304 stainless inserts and HSS cutting tools restore stronger threads in aluminum and similar softer materials.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include enough inserts for multiple repairs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit contains a supply of 3\/8-16 inserts for several repairs; quantity varies by pack, check the case contents before starting large jobs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55163640381783,"sku":"B09WN5XS99","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-case-open.jpg?v=1790346253"},{"product_id":"bilitools-m10x1-25-helicoil-thread-repair-kit-hss-drill-304-stainless-inserts-compact-case","title":"BILITOOLS M10x1.25 Helicoil Thread Repair Kit — HSS Drill, 304 Stainless Inserts, Compact Case","description":"\u003cp\u003e\u003cb\u003eBILITOOLS M10x1.25 Thread Repair Kit is a complete Helicoil-style set for restoring damaged M10x1.25 internal threads and creating stronger, corrosion-resistant stainless-steel inserts.\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf a bolt hole in an engine block, gearbox, manifold or plumbing fitting has been stripped, this kit provides the drill, tap, 304 stainless inserts and installation tools needed to rebuild the thread to its original size with improved wear resistance. The kit is tailored to the metric M10x1.25 pitch and comes organized in a compact iron case so parts stay protected and ready at the bench or on the job.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit rebuild a stripped M10x1.25 thread?\u003c\/h3\u003e\n\u003cp\u003eRestoration follows a straightforward three-step process: drill out the damaged thread to a prepared size, cut new internal threads with the supplied tap, and install a stainless insert that locks into the new thread to accept the original bolt. The insert gives a durable, corrosion-resistant contact surface and can handle higher torque than many weakened base materials.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes HSS drill sized for Helicoil installation for clean material removal.\u003c\/li\u003e\n  \u003cli\u003eSupplied tap forms precise M10x1.25 internal threads matched to the insert.\u003c\/li\u003e\n  \u003cli\u003e304 stainless threaded inserts restore or improve thread life and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eInstallation and break-off tools seat the insert flush and remove tangs safely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and applications will the kit work with?\u003c\/h3\u003e\n\u003cp\u003eThe drill and tap are made to cut through a wide range of materials, including soft and hard metals, composites and many polymers. That makes the set suitable for automotive repairs, industrial maintenance, appliances and plumbing where M10x1.25 fasteners are used.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEffective on aluminum, cast iron, steel, stainless, composites and plastics.\u003c\/li\u003e\n  \u003cli\u003eCommonly used on engine blocks, cylinder heads, gearboxes, manifolds and brackets.\u003c\/li\u003e\n  \u003cli\u003e304 stainless inserts provide improved longevity in corrosive or high-wear environments.\u003c\/li\u003e\n  \u003cli\u003eCompact iron case keeps components organized for field or shop use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's included and how do the tools work together?\u003c\/h3\u003e\n\u003cp\u003eThe kit groups everything required: a high-speed steel (HSS) drill to open the damaged hole, a precision tap to cut the new internal thread, stainless-steel Helicoil-style inserts sized M10x1.25, an insert installation driver, and a tool to break off the installation tang. These parts are coordinated so a single kit completes the repair from start to finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHSS drill with 135° point angle for efficient penetration and cleaner holes.\u003c\/li\u003e\n  \u003cli\u003eM10x1.25 tap matched to the insert pitch for reliable engagement.\u003c\/li\u003e\n  \u003cli\u003eMultiple 304 stainless thread inserts to replace stripped threads permanently.\u003c\/li\u003e\n  \u003cli\u003eInstallation driver and tang-break tool for secure seating and finishing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS M10x1.25 Thread Repair Kit is aimed at mechanics, maintenance technicians, DIY enthusiasts and plumbers who need a dependable way to restore or reinforce M10x1.25 threaded holes. If you frequently service vehicles, small engines, industrial equipment or fixtures that use metric fasteners and you want a compact, all-in-one solution for stripped threads, this kit supplies the essential components and organization to get the job done correctly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit other thread sizes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, this kit is specifically for M10x1.25 threads. Check size illustrations before buying or choose the correct kit for different pitches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the inserts in aluminum or cast iron?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 304 stainless inserts are suitable for aluminum, cast iron and many other metals and composites.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55163721482583,"sku":"B09WN2LGXG","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-case-open_ea30e2bf-86fe-4ec5-80b1-10c4259b12a7.jpg?v=1790346849"},{"product_id":"bilitools-4-2-jaw-gear-puller-4-inch-reversible-bearing-pulley-removal-heat-treated-cr-v-steel","title":"BILITOOLS 4\" 2-Jaw Gear Puller — 4-inch Reversible Bearing \u0026 Pulley Removal, Heat-Treated CR-V Steel","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS 4\" 2-jaw gear puller is a compact, reversible bearing and pulley removal tool designed for controlled extraction of small gears, pulleys, flywheels, and bearings without marring parts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 4-inch model from BILITOOLS combines heat-treated chrome-vanadium (CR-V) steel construction with a reversible two-jaw design so you can tackle both internal and external pulling tasks in tight spaces. Built for hobbyists, home mechanics, and professional technicians, it offers a balance of strength and compact size for small to medium components on motorcycles, cars, bicycles, and light machinery.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 2-jaw design make removal easier?\u003c\/h3\u003e\n\u003cp\u003eThe two-jaw layout gives stable, symmetrical gripping around the part to evenly distribute pulling force and reduce the chance of slippage. Because the jaws are reversible, the same tool can secure either the outer lip of a pulley or the inner surface of a bearing hub.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReversible jaws for internal or external pulls\u003c\/li\u003e\n  \u003cli\u003eSynchronized twin arms for balanced extraction\u003c\/li\u003e\n  \u003cli\u003eCompact 4\" spread fits tighter clearances\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features are included?\u003c\/h3\u003e\n\u003cp\u003eThis puller is forged from heat-treated CR-V steel for improved tensile strength and wear resistance under repeated use. The central forcing screw and jaw tips are machined for accurate contact and long life when used within rated limits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated chrome-vanadium steel body for toughness\u003c\/li\u003e\n  \u003cli\u003ePrecision-threaded center screw for smooth force application\u003c\/li\u003e\n  \u003cli\u003eBuilt to resist bending under typical extraction loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the BILITOOLS 4\" gear puller safely?\u003c\/h3\u003e\n\u003cp\u003ePosition the jaws securely around or inside the part, center the forcing screw on the shaft or pilot, then tighten the screw evenly until the component releases. Use steady pressure and inspect the setup before each twist to avoid misalignment or slipping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSeat jaws fully on the component edge or inner ledge\u003c\/li\u003e\n  \u003cli\u003eAlign center screw with the shaft pilot for straight pull\u003c\/li\u003e\n  \u003cli\u003eApply controlled turns; avoid sudden shocks or over-torquing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and options are available compared to this 4\" model?\u003c\/h3\u003e\n\u003cp\u003eThe BILITOOLS two-jaw range includes multiple diameters so you can pick a tool that matches the part span you commonly encounter. The 4\" size is aimed at small bearings and pulleys; larger jobs call for the 6\", 8\", 10\", or 12\" models for greater reach and grip.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAvailable sizes: 3\", 4\", 6\", 8\", 10\", 12\"\u003c\/li\u003e\n  \u003cli\u003eChoose 4\" for compact spaces and smaller components\u003c\/li\u003e\n  \u003cli\u003eUpgrade to larger sizes for wider gear or pulley diameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The BILITOOLS 4\" 2-jaw gear puller is aimed at DIY mechanics, motorcycle and bicycle hobbyists, and light repair technicians who need a compact, durable puller for small bearings, pulleys, and gears. If you regularly remove components in confined spaces or want a rugged, reversible tool for occasional shop use, this model balances portability with performance without requiring specialized adapters.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this puller be used for internal and external pulls?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the jaws reverse for both internal and external applications, letting you extract bearings and pulleys without swapping tools.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What materials is the puller made from?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The tool is forged from heat-treated chrome-vanadium (CR-V) steel for strength and wear resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55163814052183,"sku":"B0B3125ZB5","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-view-4inch-gear-puller.jpg?v=1790347521"},{"product_id":"bilitools-m10x1-5-thread-repair-kit-helicoil-hss-drill-304-stainless-inserts-case","title":"BILITOOLS M10x1.5 Thread Repair Kit — Helicoil HSS Drill, 304 Stainless Inserts, Case","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS M10x1.5 Thread Repair Kit is a complete HSS Helicoil-style set for restoring stripped or damaged M10x1.5 internal threads and rebuilding stronger, long-lasting threaded connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a bolt or stud back-out ruins a tapped hole, a reliable repair kit saves time and prevents part replacement. The BILITOOLS M10x1.5 kit bundles the high-speed steel drill, correct-size tap, 304 stainless steel inserts, installation and break-off tools in a compact iron case so you can restore threads in automotive, plumbing and general mechanical jobs. The kit is built to work across metals, composites and some polymers, giving technicians and hobbyists a practical way to renew worn fastening surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit restore a stripped M10x1.5 thread?\u003c\/h3\u003e\n\u003cp\u003eThe kit removes the damaged thread profile, cuts a new oversize thread, and installs a corrosion-resistant coil insert that provides the original M10x1.5 bore size for bolts. Installation returns thread strength and allows higher torque than the weakened parent material.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHSS drill creates the correct pilot hole diameter with a 135° apex for clean penetration.\u003c\/li\u003e\n  \u003cli\u003eMatching tap cuts the new threaded seat sized for the stainless insert.\u003c\/li\u003e\n  \u003cli\u003e304 stainless steel helicoil-style inserts recreate the M10x1.5 thread and resist corrosion.\u003c\/li\u003e\n  \u003cli\u003eInstallation and break-pin tools seat and trim the insert to factory depth.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich materials and applications are supported by the M10x1.5 kit?\u003c\/h3\u003e\n\u003cp\u003eThe set is designed to work in a wide variety of substrates so you can use it on engine blocks, housings, brackets and fittings. It is suitable for ferrous and non-ferrous metals, many composites, and thicker polymers where mechanical thread repair is practical.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon automotive work: intake manifolds, cylinder head bolts, transmission cases.\u003c\/li\u003e\n  \u003cli\u003ePlumbing and valve bodies made from metals or reinforced composites.\u003c\/li\u003e\n  \u003cli\u003eIndustrial machinery where tapped holes have been worn or cross-threaded.\u003c\/li\u003e\n  \u003cli\u003eDo not use in extremely brittle plastics without testing — check fit first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools are included, and what does each part do?\u003c\/h3\u003e\n\u003cp\u003eThe M10x1.5 kit contains the essential components to complete a thread repair from start to finish. Each tool is sized and matched to make the process straightforward, and all pieces store neatly inside the iron case for transport and on-site use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-Speed Steel (HSS) drill bit for removing damaged material and sizing the hole.\u003c\/li\u003e\n  \u003cli\u003eM10x1.5 tap to cut the new thread profile to accept the insert.\u003c\/li\u003e\n  \u003cli\u003e304 stainless steel thread inserts that restore the bolt-size and add durability.\u003c\/li\u003e\n  \u003cli\u003eInstallation driver and break pin tool to place and trim the insert reliably.\u003c\/li\u003e\n  \u003cli\u003eOrganized iron case keeps parts protected and easy to find between jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I pick the right kit size and prepare before starting?\u003c\/h3\u003e\n\u003cp\u003eSelect the kit that matches the original bolt thread (M10x1.5 for this set). Verify thread pitch and diameter with a thread gauge or the bolt itself before purchase. Clean the hole, remove debris, and follow safe drilling and tapping practices to avoid further damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm bolt thread pitch is M10x1.5 before ordering or attempting repair.\u003c\/li\u003e\n  \u003cli\u003eUse a thread gauge or compare to a known-good M10x1.5 bolt.\u003c\/li\u003e\n  \u003cli\u003eEnsure workpiece is securely clamped and drill speed is appropriate for the material.\u003c\/li\u003e\n  \u003cli\u003eRefer to image 6\/instructions included if you’re unsure which size to buy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS M10x1.5 Thread Repair Kit is aimed at mechanics, maintenance technicians, DIY enthusiasts, and fabricators who need a dependable, portable solution for restoring worn or stripped M10x1.5 threads without replacing whole components. It’s especially useful for automotive repairs, plumbing fixtures and workshop restorations where stronger, corrosion-resistant internal threads are required.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit be used on aluminum engine components?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit works on aluminum and other metals; use correct drill speed and proper clamping to avoid galling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the inserts corrosion resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The included inserts are 304 stainless steel, offering good resistance to rust in most environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55164023472471,"sku":"B09WN3JDQV","price":32.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-case-open_0e57e73b-d987-4fba-8ed3-38a909403a15.jpg?v=1790348926"},{"product_id":"bilitools-m12x1-25-thread-repair-kit-hss-drill-304-stainless-helicoil-inserts-case-included","title":"BILITOOLS M12x1.25 Thread Repair Kit — HSS Drill \u0026 304 Stainless Helicoil Inserts, Case Included","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS M12x1.25 Thread Repair Kit is a complete HSS helicoil insert set that restores stripped metric threads and replaces them with durable 304 stainless steel inserts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit gives mechanics, DIYers and technicians the tools to repair damaged internal threads without replacing the whole component. It contains hardened HSS drill and tap tools sized for M12x1.25 repairs, multiple 304 stainless helicoil inserts for longer-lasting threads, an installation tool and a break-off tang removal punch — all kept neatly inside a compact iron case for secure transport and jobsite organization.\u003c\/p\u003e\n\n\u003ch3\u003eWhat parts are included and how do they work together?\u003c\/h3\u003e\n\u003cp\u003eThe kit is arranged so each step in the repair sequence has the correct tool: drill to open the damaged hole, tap to cut the new thread profile, helicoil inserts to form the new internal thread, an insertion tool to place each coil, and a break pin tool to remove the installation tang. Each component is matched to the M12x1.25 metric thread size to ensure consistent fit and function.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed steel (HSS) drill for clean, accurate hole preparation.\u003c\/li\u003e\n  \u003cli\u003eMatching HSS tap to cut the correct helicoil thread form.\u003c\/li\u003e\n  \u003cli\u003e304 stainless steel helicoil inserts for corrosion resistance and strength.\u003c\/li\u003e\n  \u003cli\u003eInsertion tool and tang-break tool for fast, repeatable installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich materials and applications are appropriate?\u003c\/h3\u003e\n\u003cp\u003eThis thread repair kit is designed for use in a wide variety of base materials including steel, aluminum, cast iron, composites and certain polymers. It’s especially useful where the original thread has stripped, cross-threaded or suffered wear — common situations in automotive cylinder heads, engine blocks, transmission housings, plumbing fittings and machinery mounts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for metals and many non-ferrous materials.\u003c\/li\u003e\n  \u003cli\u003eCommonly used in automotive and plumbing repair tasks.\u003c\/li\u003e\n  \u003cli\u003eAlso helpful for industrial equipment and home workshop projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable are the replacements?\u003c\/h3\u003e\n\u003cp\u003eThe coil inserts are manufactured from 304 stainless steel, which provides improved corrosion resistance and a harder wearing internal thread compared with softer base materials. The HSS drill and tap feature a 135° apical twist geometry to cut efficiently with reduced burrs, improving insert seating and long-term torque capacity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e304 stainless inserts resist rust and extend thread life.\u003c\/li\u003e\n  \u003cli\u003eHSS tooling with 135° twist angle for quicker penetration and cleaner cuts.\u003c\/li\u003e\n  \u003cli\u003eRepaired threads can accept higher torque than the original weakened thread in softer metals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I choose the right size and avoid mistakes?\u003c\/h3\u003e\n\u003cp\u003eConfirm the thread size in the part you plan to repair before purchasing — this kit is specifically sized for M12x1.25 threads. If you’re unsure, compare the bolt and damaged hole to a thread gauge or reference the kit’s size chart image; using the wrong size can damage the hole further or produce a poor fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify bolt thread pitch and diameter before starting repairs.\u003c\/li\u003e\n  \u003cli\u003eRefer to the included sizing diagram to confirm M12x1.25 compatibility.\u003c\/li\u003e\n  \u003cli\u003eWork slowly on the drill and tap steps to avoid cross-threading or over-cutting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The BILITOOLS M12x1.25 Thread Repair Kit is aimed at professional mechanics, fleet maintenance personnel, machine shop technicians and dedicated DIYers who need a reliable, portable repair solution for stripped metric internal threads. If you frequently work on engines, transmissions, plumbing flanges or metal fabrications and want to avoid costly part replacements, this kit supplies the matched tools and stainless inserts to get the job done efficiently and securely.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit repair stripped threads in aluminum engine blocks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The HSS tooling and 304 stainless inserts are suitable for aluminum and restore a stronger internal thread than the original.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many inserts are included for M12x1.25 repairs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes multiple M12x1.25 304 stainless helicoil inserts; check the product photos for exact quantity.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55164415574359,"sku":"B09WN4QC9H","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-view-open-case.jpg?v=1790352467"},{"product_id":"bilitools-m10x1-0-thread-repair-kit-hss-drill-304-stainless-helicoil-inserts-in-iron-case","title":"BILITOOLS M10x1.0 Thread Repair Kit – HSS Drill, 304 Stainless Helicoil Inserts in Iron Case","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS M10x1.0 Thread Repair Kit is a complete HSS Helicoil repair set designed to restore stripped M10x1.0 internal threads and create a stronger, corrosion-resistant replacement thread.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit contains everything required to drill out damaged threads, tap a correct-size hole, install 304 stainless steel helicoil inserts, and trim the tang for a smooth, reusable M10x1.0 threaded hole. Packaged in a sturdy iron case, the set is built for automotive, plumbing, and general mechanical repairs where repaired threads often need higher torque capacity than the original material can provide.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit restore a stripped M10x1.0 thread?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit supplies a hardened HSS drill to open the damaged hole, a matching M10x1.0 tap to cut the new thread form, and stainless helicoil inserts that become the new internal thread. The helicoil creates a stronger, wear-resistant threaded surface than many base metals, especially softer alloys.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes HSS drill bit sized for M10x1.0 repair preps.\u003c\/li\u003e\n  \u003cli\u003eSupplied tap cuts the precise oversized hole for insert seating.\u003c\/li\u003e\n  \u003cli\u003e304 stainless helicoil inserts provide durable, corrosion-resistant threads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools are included and how do I use them safely?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit bundles the drill, tap, multiple threaded inserts, an installation driver, and a break-off\/tang removal tool—plus labels and storage. Follow standard workshop safety: secure the workpiece, use cutting fluid for metal, and run tools at correct speeds to avoid overheating or tool damage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInstallation driver positions the insert concentrically into the tapped hole.\u003c\/li\u003e\n  \u003cli\u003eBreak pin tool removes the insert tang cleanly after installation.\u003c\/li\u003e\n  \u003cli\u003eIron case keeps parts organized and protected between jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich materials and applications are suitable for this Helicoil kit?\u003c\/h3\u003e\n\n\u003cp\u003eThis M10x1.0 repair set is compatible with steel, aluminum, composites, and many polymers commonly found in engines, chassis, valves, and equipment housings. It’s particularly useful where original threads have stripped from softer metals or after repeated assembly cycles.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorks on metals, composites, and polymer components.\u003c\/li\u003e\n  \u003cli\u003eCommonly used for automotive cylinder heads, transmission housings, and plumbing fittings.\u003c\/li\u003e\n  \u003cli\u003e304 stainless inserts resist corrosion for longer-lasting repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I choose this M10x1.0 kit instead of ordering a replacement part?\u003c\/h3\u003e\n\n\u003cp\u003eRepairing a threaded hole often saves time and money versus replacing an entire component or assembly. When the base part is structurally sound but the thread is damaged, a helicoil repair restores full functional strength and allows continued use of the original fastener specification.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCost-effective alternative to replacing the entire component.\u003c\/li\u003e\n  \u003cli\u003eMaintains original fastener size and torque specs after repair.\u003c\/li\u003e\n  \u003cli\u003eEasier and faster than machining a new threaded boss in many cases.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS M10x1.0 Thread Repair Kit is aimed at mechanics, DIY technicians, maintenance teams, and hobbyists who need a reliable, portable solution for restoring damaged M10x1.0 threads. If you frequently service automotive parts, plumbing fittings, or equipment housings and want a durable repair that restores original thread fit and torque capability—this kit provides the tools and corrosion-resistant inserts to get the job done correctly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit other thread sizes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This set is specifically for M10x1.0; for other sizes you should choose the kit matching your thread pitch and diameter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the helicoil inserts in aluminum?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—304 stainless inserts are suitable for aluminum, providing stronger, corrosion-resistant threads.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55165005103447,"sku":"B09WN2WW43","price":31.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-kit-iron-case-front.jpg?v=1790354447"},{"product_id":"bilitools-long-reach-oil-funnel-26-2-carbon-steel-with-flexible-spout-and-stainless-filter","title":"BILITOOLS long-reach oil funnel 26.2\" — carbon-steel with flexible spout and stainless filter","description":"\u003cp\u003e\u003cstrong\u003eThe BILITOOLS 26.2\" Long Oil Funnel is a carbon-steel, long-reach funnel with a flexible metal spout and filter designed to deliver oils and transmission fluids into deep or recessed fill ports with minimal mess.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you work on cars, ATVs, motorcycles, or older vehicles you know how frustrating short, rigid funnels can be when a fill port sits behind components. This funnel gives an extended reach and a narrow tip so fluids go where they belong. Built from carbon steel with a stainless-steel filter and a threaded joint, it’s made for repeated garage use and easier, cleaner pours.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 26.2\" length make filling easier?\u003c\/h3\u003e\n\u003cp\u003eThe long neck reaches deep and recessed openings that standard funnels cannot access, so you avoid dragging other engine parts or spilling fluid. The narrow tip guides liquids precisely into tight ports, reducing waste and cleanup time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e26.2-inch flexible metal spout reaches behind engine components\u003c\/li\u003e\n  \u003cli\u003eNarrow tip focuses flow into small openings\u003c\/li\u003e\n  \u003cli\u003eLess splashing and fewer drips around the fill area\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this funnel handle different automotive fluids and vehicles?\u003c\/h3\u003e\n\u003cp\u003eYes — it’s designed for typical garage fluids such as motor oil and transmission fluid and fits most modern and vintage vehicles. Use it on cars, trucks, motorcycles, ATVs, and even golf carts where access is restricted.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with motor oil, transmission fluid, and other garage fluids\u003c\/li\u003e\n  \u003cli\u003eWorks on Jeeps, Hondas, Harleys, Nissan trucks, Can-Am ATVs, Chevy classics, and more\u003c\/li\u003e\n  \u003cli\u003eNot intended for potable liquids or non-automotive chemicals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features improve durability and prevent contamination?\u003c\/h3\u003e\n\u003cp\u003eThe main body is carbon steel for toughness, while a stainless-steel filter traps debris during filling. A threaded connection creates a secure seal at the joint so leaks are minimized, even during repeated use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarbon-steel construction for repeated garage use\u003c\/li\u003e\n  \u003cli\u003eStainless-steel filter screens out dirt and particles\u003c\/li\u003e\n  \u003cli\u003eThreaded connection reduces leaks between parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to handle and store this funnel in a busy shop?\u003c\/h3\u003e\n\u003cp\u003eThe funnel includes a side hook that acts as a comfortable handhold for better pouring control and doubles as a hanging point for wall storage. The flexible spout holds its bent shape, so you can position it around obstacles and set it aside without losing alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSide hook provides grip and hangs on pegboards or racks\u003c\/li\u003e\n  \u003cli\u003eFlexible spout holds position around engine-bay obstacles\u003c\/li\u003e\n  \u003cli\u003eCompact when hung, keeps your workspace organized\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS 26.2\" Long Oil Funnel is built for DIY mechanics, professional technicians, vintage-car restorers, and anyone who routinely tops up fluid in hard-to-reach fill ports. If you need a durable, reusable funnel that reduces spills and fits a wide range of vehicles and fluids (garage use only), this tool makes filling faster, cleaner, and more precise.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this funnel work on motorcycles and ATVs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Its long, flexible spout reaches recessed fill ports on motorcycles and ATVs, including Harley and Can-Am models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the filter washable and reusable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The stainless-steel filter can be cleaned, reused, and reinstalled for continued debris protection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55165635756375,"sku":"B0DP25CSGW","price":52.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-view-long-oil-funnel.jpg?v=1790356753"},{"product_id":"bilitools-pedal-depressor-tool-28-inch-adjustable-brake-gas-throttle-holder-with-pistol-grip-and-rubber-foot","title":"BILITOOLS pedal depressor tool — 28-inch adjustable brake\/gas\/throttle holder with pistol-grip and rubber foot","description":"\u003cp\u003e\u003cstrong\u003eThe BILITOOLS 28-inch adjustable pedal depressor is a handheld tool that locks down brake, gas, or throttle pedals so one person can perform tests and adjustments safely and accurately.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, pistol-grip tool extends up to 28 inches and is built to hold a pedal position without a second technician. It frees up your hands so you can manage diagnostics, emissions checks, brake-light verification, and engine-speed adjustments while staying in control of the vehicle's interior. The rubberized foot prevents slipping and the hook plate stabilizes the shaft under the seat or dash, making it practical for a wide range of service tasks.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tool make single-person vehicle testing possible?\u003c\/h3\u003e\n\u003cp\u003eBy providing a secure, adjustable hold on a pedal, the BILITOOLS depressor keeps the pedal engaged while you work. The pistol-grip trigger locks the shaft at the chosen length, so you can focus on instruments and readings without asking someone to hold the pedal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable reach up to 28 inches for most car and truck interiors\u003c\/li\u003e\n  \u003cli\u003ePistol-grip trigger permits quick length changes and locking\u003c\/li\u003e\n  \u003cli\u003eHook plate stabilizes the shaft under the seat or steering column\u003c\/li\u003e\n  \u003cli\u003eRubberized foot resists slipping on metal or plastic pedal surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tasks can I perform with the pedal depressor?\u003c\/h3\u003e\n\u003cp\u003eThe tool is designed for any procedure that needs a pedal held in position: brake-light checks, emissions and idle-speed testing, or simulating throttle input during adjustments. It reduces the need for temporary helpers and streamlines diagnostic work in the garage or field.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrake-light verification while wiring or bulb changes are made\u003c\/li\u003e\n  \u003cli\u003eEngine-speed and emissions checks that require steady pedal position\u003c\/li\u003e\n  \u003cli\u003eThrottle or cruise-control testing and setup\u003c\/li\u003e\n  \u003cli\u003eBrake system inspections that need consistent pedal engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the tool protect vehicle surfaces and remain stable?\u003c\/h3\u003e\n\u003cp\u003eThe depressor uses a rubberized foot to cushion contact with the pedal and increase grip, while a metal plate hooks under the seat or dash to prevent displacement during use. For delicate interiors, simple padding prevents scuffs or impressions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRubber foot reduces pedal wear and prevents sliding\u003c\/li\u003e\n  \u003cli\u003eHook plate secures the shaft against unintended movement\u003c\/li\u003e\n  \u003cli\u003eUse towels between seat and tool to protect leather or trim\u003c\/li\u003e\n  \u003cli\u003eDurable construction tolerates repeated shop use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the length and locking mechanism easy to adjust during work?\u003c\/h3\u003e\n\u003cp\u003eYes. The pistol-grip trigger lets you extend and set the shaft quickly to the exact length needed for the job. Once engaged, the locking mechanism holds firmly so you can carry out testing without readjustment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrigger-operated lock for fast, one-handed adjustments\u003c\/li\u003e\n  \u003cli\u003eExtends smoothly up to 28 inches to fit most interiors\u003c\/li\u003e\n  \u003cli\u003eStable hold prevents drift during prolonged tests\u003c\/li\u003e\n  \u003cli\u003eCompact design stores easily in a toolbox or under a seat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The BILITOOLS pedal depressor is aimed at mechanics, vehicle inspectors, fleet technicians, DIY enthusiasts, and anyone who needs to perform pedal-dependent tests alone. If you work on brakes, throttle setups, emissions checks, or electrical testing of brake lights, this adjustable 28-inch tool simplifies the process while protecting pedal surfaces. Remember to place towels or soft padding between the tool and leather seats to prevent marks during use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the pedal depressor hold both brake and gas pedals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The rubberized foot and adjustable shaft let it secure brake, gas, or throttle pedals for testing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the tool damage leather seats when hooked under them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Avoid direct contact — place towels or soft padding between the tool and leather to prevent marks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55166057513303,"sku":"B09XQ15GTQ","price":54.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-view-pedal-depressor.jpg?v=1790362055"},{"product_id":"bilitools-3-6l-pentastar-timing-tool-kit-cam-phaser-chain-locking-set-with-2011-adapter","title":"BILITOOLS 3.6L Pentastar Timing Tool Kit — Cam Phaser \u0026 Chain Locking Set with 2011+ Adapter","description":"\u003cp\u003e\u003cstrong\u003eThe BILITOOLS 3.6 Pentastar Timing Tool Kit is a complete cam phaser and timing-chain locking set engineered to hold camshaft phasers, lock tensioners, and secure timing chains on 3.6L Pentastar VVT engines during service.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you work on Chrysler, Dodge, Jeep or other vehicles equipped with the 3.6L Pentastar VVT engine, this mechanic-focused toolkit consolidates the specialized fixtures needed to keep timing components indexed and stable while you loosen or tighten oil control valves, replace chains, or service cam phasers. The kit mirrors multiple OEM tools in a single package and includes parts required for models from earlier years through 2012 and newer applications.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and model years does this timing kit support?\u003c\/h3\u003e\n\u003cp\u003eThis tool set is tailored for 3.6L Pentastar engines that use Variable Valve Timing (VVT). It will not work on engines that use Variable Valve Lift (VVL) systems. For model years 2011 and newer, the kit includes the specific adapter required for correct fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 3.6L Pentastar VVT engines in Chrysler, Dodge, Jeep, and related models.\u003c\/li\u003e\n  \u003cli\u003eIncludes adapter for 2011 models onward (10369A included).\u003c\/li\u003e\n  \u003cli\u003eNot compatible with VVL-equipped engines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools are included, and what do they do?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies a set of camshaft phaser locks, multiple timing chain holders for different sides and model years, plus a camshaft tensioner locking pin. Each piece is shaped to hold components securely so you can perform valve timing service without timing slippage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLeft and right camshaft phaser lock pair to hold phasers in position.\u003c\/li\u003e\n  \u003cli\u003eTiming chain holders for driver and passenger sides and for 2012+ variants.\u003c\/li\u003e\n  \u003cli\u003eCamshaft tensioner locking pin to keep tensioners retracted during work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this replace specific OEM tool numbers?\u003c\/h3\u003e\n\u003cp\u003eYes — this BILITOOLS set is designed as an aftermarket replacement for a range of OEM part numbers, making it a convenient consolidated alternative to buying individual factory tools. It covers the common tool references technicians request for Pentastar timing jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM numbers like 10369A, 10200A, 10202A and related variants.\u003c\/li\u003e\n  \u003cli\u003eProvides the 2011+ adapter so you don’t need an extra purchase for newer engines.\u003c\/li\u003e\n  \u003cli\u003eSaves time by supplying multiple holder shapes in one kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use the kit during a timing service?\u003c\/h3\u003e\n\u003cp\u003eUse the phaser locks to fix camshafts in their service positions before removing or torquing oil control valves. Fit the matching timing chain holder to the driver or passenger side as required, and insert the tensioner pin when retracting or re-installing tensioners. Follow factory service steps for locking order and torque specs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall camshaft phaser locks first to prevent rotation.\u003c\/li\u003e\n  \u003cli\u003eSelect the proper timing chain holder for the engine year and side.\u003c\/li\u003e\n  \u003cli\u003eInsert the tensioner locking pin when removing the tensioner or chain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Professional technicians and serious DIY mechanics who perform timing chain, cam phaser, or oil control valve service on 3.6L Pentastar VVT engines will benefit from this BILITOOLS kit. It is intended for shops and experienced home mechanics who need reliable locking fixtures that replace multiple OEM tools and simplify alignment tasks while working on Chrysler, Dodge, Jeep, and similar vehicles. Always consult the vehicle’s service manual for exact procedures and torque values before using any aftermarket timing tool.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit work on VVL (Variable Valve Lift) Pentastar engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The kit is made for 3.6L VVT engines only and is not compatible with VVL systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include the adapter for 2011 and newer models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 10369A adapter for 2011+ models is included in the kit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55166136549719,"sku":"B0CCJ1W853","price":54.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-packaging-3.6-pentastar-kit.jpg?v=1790363996"},{"product_id":"bilitools-6-2-jaw-gear-puller-compact-reversible-internal-external-bearing-pulley-remover-cr-v-steel","title":"BILITOOLS 6\" 2-Jaw Gear Puller — Compact Reversible Internal\/External Bearing \u0026 Pulley Remover, CR-V Steel","description":"\u003cp\u003e\u003cstrong\u003eThe BILITOOLS 6\" 2 Jaw Gear Puller is a reversible internal\/external bearing and pulley remover made from heat-treated CR-V steel for reliable, damage-free extraction.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact 6-inch, two-jaw puller is built to handle small bearings, pulleys, gears and flywheels in tight spaces across automotive, motorcycle, bicycle and light machinery repairs. Its reversible jaw orientation and heavy-duty chrome-vanadium construction balance strength with precision, letting both DIYers and professional technicians extract components without marring surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the reversible internal\/external design help in confined repair spaces?\u003c\/h3\u003e\n\u003cp\u003eYou can flip the jaws to switch between internal pulls (gripping from inside a bore) and external pulls (gripping around an outer edge), so the same tool covers more jobs and reduces the need for multiple pullers. The compact 6\" frame keeps the tool usable where larger pullers won't fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReversible jaws for internal and external extraction\u003c\/li\u003e\n  \u003cli\u003eCompact 6\" span fits tight housings and small assemblies\u003c\/li\u003e\n  \u003cli\u003eQuick orientation change without special tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this gear puller durable for repeated workshop use?\u003c\/h3\u003e\n\u003cp\u003eManufactured from heat-treated CR-V (chrome-vanadium) steel, the puller resists bending and deformation under high load. The central forcing screw and jaw pins are hardened to withstand repeated torque, providing long-term reliability in demanding repair tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated CR-V steel body for high tensile strength\u003c\/li\u003e\n  \u003cli\u003eHardened forcing screw and reinforced jaw pivots\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finish for extended service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to set up and operate for a beginner?\u003c\/h3\u003e\n\u003cp\u003eThe puller features a straightforward screw mechanism and quick jaw adjustment so users can position the tool and begin extraction in minutes. Its two-jaw configuration gives balanced pull force and simpler alignment compared with multi-arm models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eScrew-drive operation for smooth, controlled extraction\u003c\/li\u003e\n  \u003cli\u003eQuick jaw positioning for fast setup\u003c\/li\u003e\n  \u003cli\u003eSuitable for DIYers and professional mechanics alike\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and applications should I expect from the BILITOOLS line?\u003c\/h3\u003e\n\u003cp\u003eThis 6\" unit is one option in a range of two-jaw pullers that includes 3\", 4\", 6\", 8\", 10\" and 12\" models, allowing selection by part size and workspace. The 6\" model is ideal for small to medium bearings, pulleys and gears commonly found in motorcycles, bicycles, small engines and household machinery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSize options from 3\" to 12\" to match part diameters\u003c\/li\u003e\n  \u003cli\u003e6\" model tailored for small-to-medium components\u003c\/li\u003e\n  \u003cli\u003eWorks on bearings, pulleys, gears and flywheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS 6\" 2 Jaw Gear Puller is aimed at home mechanics, motorcycle and bicycle technicians, small-engine repairers and anyone who needs a compact, durable extractor for bearings and pulleys. Choose this model when you need a versatile, reversible puller that fits tight spaces and holds up under frequent use without specialized training.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this puller remove bearings without damaging them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — when used correctly the reversible jaws and controlled screw action extract bearings evenly to reduce scoring or marring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 6\" model suitable for motorcycle work?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the 6\" size fits many small-to-medium motorcycle bearings and pulleys commonly encountered in maintenance tasks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55166695932247,"sku":"B0B312ZRFY","price":53.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-view-6-inch-gear-puller.jpg?v=1790370338"},{"product_id":"bilitools-strut-spreader-tool-steering-knuckle-spreader-5-10-5-mm-gap-120-nm-rated","title":"BILITOOLS Strut Spreader Tool – Steering Knuckle Spreader, 5–10.5 mm Gap, 120 Nm Rated","description":"\u003cp\u003e\u003cstrong\u003eThe BILITOOLS Strut Spreader Tool safely opens strut-to-knuckle clamps and compatible lower ball-joint clamp slots with controlled parallel spreading up to 10.5 mm.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compactly engineered mechanical spreader is designed for suspension technicians and DIY mechanics who need a precise, low-profile tool to separate strut clamps during removal or installation. Made from hardened carbon steel, the tool delivers even force across clamp surfaces and accepts a 3\/8\" drive ratchet or a 19 mm socket on the exterior hex for manual operation. It helps avoid destructive prying with hammers and chisels while offering a measured spreading range for many European and mainstream vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the tool open a strut clamp without damaging surrounding parts?\u003c\/h3\u003e\n\u003cp\u003eThe BILITOOLS unit uses parallel spreading faces to apply force evenly across the clamp gap, minimizing the risk of concentrated contact points that can deform clamp edges. The compact profile fits into narrow strut base gaps and advances the spreader arm in a straight, controlled path for predictable results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eParallel jaws reduce uneven prying and local stress.\u003c\/li\u003e\n  \u003cli\u003eLow-profile body accesses tight spaces at the strut base.\u003c\/li\u003e\n  \u003cli\u003eAdjustable spread from 5 to 10.5 mm to match clamp designs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat drives the spreader, and can I use power tools?\u003c\/h3\u003e\n\u003cp\u003eYou can operate the spreader by hand with a 3\/8\" drive ratchet or by turning a 19 mm socket on the external hex. A 19 mm open-end wrench can steady the tool body if needed. Do not use electric or pneumatic impact tools — the tool is intended for controlled manual torque only.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAccepts 3\/8\" drive ratchet for incremental control.\u003c\/li\u003e\n  \u003cli\u003eExternal 19 mm hex provides an alternate manual option.\u003c\/li\u003e\n  \u003cli\u003eMaximum recommended torque: 120 Nm; avoid power tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich cars and clamp types is this spreader compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe spreading range (5–10.5 mm) fits many split-clamp and ring-style strut clamps commonly found on select Volkswagen, Audi, BMW, MINI, Ford and other vehicles. Compatibility varies by model year and clamp design, so confirm the gap size before use. It can also assist with opening some lower ball-joint clamp slots that follow similar dimensions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for split-strut clamps with a 5–10.5 mm gap.\u003c\/li\u003e\n  \u003cli\u003eWorks on many European and mainstream passenger vehicles.\u003c\/li\u003e\n  \u003cli\u003eVerify clamp geometry and gap before attempting use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and serviceable is the tool in a professional shop?\u003c\/h3\u003e\n\u003cp\u003eConstructed from hardened carbon steel, the spreader stands up to repeated suspension work while maintaining a compact form factor for storage and transport. Its simple mechanical design means there are no consumables to replace; regular inspection for wear and light lubrication of the screw thread will preserve performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty carbon steel construction for longevity.\u003c\/li\u003e\n  \u003cli\u003eScrew-driven mechanism is easy to maintain and inspect.\u003c\/li\u003e\n  \u003cli\u003eCompact size fits tool rolls and small toolboxes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The BILITOOLS Strut Spreader Tool is aimed at professional technicians, mobile mechanics, and experienced DIYers who remove or install struts and occasionally service lower ball joints. Choose this tool if you need a hand-operated, precise method to separate clamps without resorting to destructive tools, and confirm your vehicle’s clamp gap falls within the 5–10.5 mm operating range before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum spread range of the BILITOOLS strut spreader?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The tool provides a 5–10.5 mm (0.20–0.41\") spreading range suitable for many split-clamp strut designs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use an impact wrench to operate this spreader?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The spreader is designed for manual operation with a 3\/8\" ratchet or 19 mm socket only; avoid power or air tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55166827692375,"sku":"B0B7RN7VHY","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-strut-spreader-front-view.jpg?v=1790371961"},{"product_id":"bilitools-transmission-fill-tool-kit-for-mercedes-9g-tronic-4-piece-m12-adapter-drain-tool","title":"BILITOOLS Transmission Fill Tool Kit for Mercedes 9G‑Tronic (4‑Piece) — M12 Adapter \u0026 Drain Tool","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS 4PCS Transmission Fill Tool is a compact service kit containing four purpose-made adapters that let you drain and refill ATF on Mercedes 9G‑Tronic transmissions safely and precisely.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis lightweight kit combines zinc‑alloy and aluminum components engineered to fit the unique ports and fasteners of 9‑speed Mercedes transmissions (type 725.0xx), plus some Nissan\/Infiniti models that share the same drivetrain. It includes the common M12 x 1.5 fill adapter and the special 9G‑Tronic fill adapter, a fluid drain tool, and an 8mm oil pan spanner — all packed in a molded case so you can keep the set organized in your toolbox or trunk.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit simplify a transmission fluid service?\u003c\/h3\u003e\n\u003cp\u003eThe BILITOOLS kit groups every adapter you need for a full transmission fluid change into one set, removing the guesswork of locating compatible fittings. That means quicker setup, fewer parts to buy separately, and a neater service process whether you work in a home garage or a professional bay.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes M12 x 1.5 fill adapter and the special 9G‑Tronic adapter for Mercedes 722.9\/725 series.\u003c\/li\u003e\n  \u003cli\u003eFluid drain tool and 8mm oil pan spanner for controlled draining and removal.\u003c\/li\u003e\n  \u003cli\u003eDurable storage case keeps all adapters together and protected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials are the adapters made from and why does it matter?\u003c\/h3\u003e\n\u003cp\u003eAdapters use a combination of corrosion‑resistant zinc alloy and lightweight aluminum. Zinc alloy provides a strong, wear‑resistant connection for repeated torque, while aluminum reduces the chance of damaging delicate transmission threads and housings during installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eZinc alloy pieces resist wear under high torque and frequent use.\u003c\/li\u003e\n  \u003cli\u003eAluminum parts are softer against transmission ports to minimize marring.\u003c\/li\u003e\n  \u003cli\u003eAll components are designed to withstand contact with ATF and shop environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles are compatible with this transmission fill set?\u003c\/h3\u003e\n\u003cp\u003eThe kit is tailored for Mercedes‑Benz vehicles equipped with the 9‑speed 9G‑Tronic transmission (type 725.0xx), covering many C‑Class, E‑Class, S‑Class, GLC, GLE, and GLS models. It also fits some Nissan and Infiniti models that use equivalent 9G transmissions, widening its usefulness across different garages.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Mercedes models using 9G‑Tronic (OEM equivalents listed in product details).\u003c\/li\u003e\n  \u003cli\u003eWorks with select Nissan\/Infiniti longitudinal RWD\/4WD models (e.g., Nissan Z RZ34, Frontier D41, Titan, Infiniti QX80).\u003c\/li\u003e\n  \u003cli\u003eOEM equivalent part numbers: 725 289 22 90 00, 725 589 00 09 00, 725 589 02 90 00.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the included tools help avoid common service mistakes?\u003c\/h3\u003e\n\u003cp\u003eThe right adapter fit prevents cross‑threading and leaking, the drain tool controls fluid removal, and the oil pan spanner offers correct leverage for pan fasteners. Using purpose-built tools reduces the risk of over‑tightening, damaging seals, or contaminating new fluid during a service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-fit adapters reduce the chance of cross‑threading transmission ports.\u003c\/li\u003e\n  \u003cli\u003eDedicated drain tool captures and directs ATF for cleaner, safer draining.\u003c\/li\u003e\n  \u003cli\u003e8mm oil pan spanner ensures correct torque and access to pan fasteners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This BILITOOLS 4PCS Transmission Fill Tool set is aimed at independent mechanics, seasoned DIYers, and fleet technicians who service Mercedes 9G‑Tronic transmissions or compatible Nissan\/Infiniti models. If you perform scheduled ATF changes and need a compact, durable kit that matches OEM fittings without buying multiple adapters separately, this set saves time and reduces the risk of service errors.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit Mercedes 9G‑Tronic transmissions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s designed for Mercedes 9‑speed 9G‑Tronic (type 725.0xx) models and lists OEM equivalent part numbers for confirmation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these adapters on Nissan or Infiniti models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Some Nissan\/Infiniti longitudinal models that share the 9G‑Tronic design are compatible, such as Nissan Z (RZ34) and Infiniti QX80.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55166955323735,"sku":"B0C1NF5G79","price":39.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-packed-case.jpg?v=1790373215"},{"product_id":"bilitools-brake-caliper-compression-tool-kit-rear-wind-back-pad-spreader-18-adapters-left-right-thrust","title":"BILITOOLS Brake Caliper Compression Tool Kit — Rear Wind-Back \u0026 Pad Spreader, 18 Adapters, Left\/Right Thrust","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS Brake Caliper Compression Tool is a complete wind-back and pad-spreader kit that safely rotates and compresses rear brake pistons for fast, damage-free brake service.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis professional-grade kit supplies the adapters, reaction plates and dual-handed thrust assemblies technicians need to retract both standard push-back and wind-back caliper pistons. Built from hardened 45# carbon steel with a protective finish and stored in a molded ABS case, the set is made for repeated garage or mobile use and fits a wide range of European, Asian and American vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tool handle both push-back and wind-back brake pistons?\u003c\/h3\u003e\n\n\u003cp\u003eThe BILITOOLS kit includes left- and right-handed thrust bolts and a selection of adapters to match various piston faces. Switching the handed assembly and matching an adapter lets you either push pistons straight in or wind them back to reset parking-brake style calipers without forcing or damaging the threads.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes both left- and right-handed thrust bolt assemblies for rotational control.\u003c\/li\u003e\n  \u003cli\u003e18 adapters accommodate different piston diameters and shapes.\u003c\/li\u003e\n  \u003cli\u003eTwo reaction plates stabilize the caliper during winding or compression.\u003c\/li\u003e\n  \u003cli\u003ePowerful internal spring maintains consistent pressure while turning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and piston types are compatible with this brake caliper tool?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit is engineered for broad compatibility across many makes and models, covering common passenger cars and light trucks. The kit's adapter range and dual-handed functionality make it suitable for brands from Mazda and Toyota to BMW, Audi and Volkswagen, plus many domestic models.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAdapters fit a wide span of piston diameters used on European, Asian and American cars.\u003c\/li\u003e\n  \u003cli\u003eWorks with calipers that require either linear compression or rotational wind-back.\u003c\/li\u003e\n  \u003cli\u003eDesigned to reduce the need for brand-specific specialty tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and easy to use is the BILITOOLS caliper compressor?\u003c\/h3\u003e\n\n\u003cp\u003eComponents are forged from tempered 45# carbon steel and finished with a sandblasted surface for corrosion resistance and long life. The T-handle and spring-assisted mechanism deliver controlled force, while the molded case keeps parts organized for quick job setup and transport.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHardened carbon-steel construction for repeated heavy use.\u003c\/li\u003e\n  \u003cli\u003eSpring-loaded thrust gives steady, predictable compression.\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty ABS case with labeled slots for fast selection and storage.\u003c\/li\u003e\n  \u003cli\u003eSandblasted finish resists wear and surface rust in garage environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety or practical advantages does this kit provide during brake service?\u003c\/h3\u003e\n\n\u003cp\u003eUsing the correct adapter and handed assembly prevents cross-threading and piston damage that can occur with improvised tools. The reaction plates and controlled winding action reduce the chance of slippage, protecting caliper seals and ensuring new pads seat correctly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReduces risk of piston and seal damage by providing controlled, compatible contact.\u003c\/li\u003e\n  \u003cli\u003ePrevents accidental caliper distortion from uneven force application.\u003c\/li\u003e\n  \u003cli\u003eImproves pad installation clearance for quicker, cleaner jobs.\u003c\/li\u003e\n  \u003cli\u003eOrganized kit minimizes time spent searching for the right component.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The BILITOOLS Brake Caliper Compression Tool is aimed at professional mechanics, independent technicians and knowledgeable DIYers who work on a variety of cars and need a single kit that handles both push-back and wind-back pistons. If you service multiple makes, perform parking-brake caliper rebuilds, or want a durable, organized toolset that reduces the risk of piston damage, this kit is a practical, long-lasting choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit wind back parking-brake style rear calipers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes left- and right-handed thrust assemblies and adapters designed to wind back parking-brake style pistons safely.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the BILITOOLS set suitable for multiple car brands?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. With 18 adapters and two reaction plates, it covers many European, Asian, and American passenger vehicle calipers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55167070273879,"sku":"B0CXDYHSDL","price":60.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-view-case-open.jpg?v=1790376419"},{"product_id":"bilitools-adjustable-3-jaw-oil-filter-wrench-set-universal-63-130mm-1-2-3-8-drive-adapter-carbon-steel","title":"BILITOOLS Adjustable 3-Jaw Oil Filter Wrench Set, Universal 63–130mm, 1\/2\" \u0026 3\/8\" Drive Adapter, Carbon Steel","description":"\u003cp\u003e\u003cstrong\u003eThe BILITOOLS Universal Adjustable 3-Jaw Oil Filter Wrench is a heavy-duty, two-piece tool set that grips and turns oil filters from 63mm to 130mm using 3\/8\" or 1\/2\" drives for tight spaces and stubborn filters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eChange oil filters faster and with less frustration: this adjustable three-jaw wrench set was engineered to fit a wide range of cartridge and spin-on filters while giving you the leverage options to work in cramped engine bays. Made from 40# carbon steel for long life, the set includes two size ranges and a detachable adapter so mechanics, DIYers, and fleet technicians can remove or install filters without damaging housings or filter bodies.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the tool adapt to different oil filter sizes?\u003c\/h3\u003e\n\u003cp\u003eThe BILITOOLS wrench uses three pivoting jaws that automatically close onto the filter as torque is applied. Two separate pieces cover overlapping diameter ranges so most common filters are handled with a firm grip.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCovers 63mm–102mm (2-1\/2\"–4\") and 75mm–130mm (3\"–5-1\/8\").\u003c\/li\u003e\n  \u003cli\u003eJaws self-adjust to filter diameter under turning force for secure engagement.\u003c\/li\u003e\n  \u003cli\u003eSuitable for both round canisters and some hexless cartridges.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat drive options and access solutions does it include?\u003c\/h3\u003e\n\u003cp\u003eThe set is built to work with multiple drive tools so you can choose the leverage and reach needed for the job. A detachable adapter converts between 1\/2\" and 3\/8\" connections to fit ratchets, breaker bars, or a 21mm wrench.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with 1\/2\" drive tools for high torque removal.\u003c\/li\u003e\n  \u003cli\u003eIncludes adapter for 3\/8\" drive ratchets to reach tighter spaces.\u003c\/li\u003e\n  \u003cli\u003eCompact profile helps fit in narrow engine compartments and around brackets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this wrench damage delicate or painted filters?\u003c\/h3\u003e\n\u003cp\u003eThe three-jaw design applies pressure where needed while minimizing slip; carbon steel claws are shaped to bite under torque but avoid unnecessary scraping when used correctly. For painted or ornamental housings, use gentle initial tension and steady turning.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClaws engage as torque increases, reducing slippage and sudden slips.\u003c\/li\u003e\n  \u003cli\u003eUse steadier, controlled force to protect painted or plastic housings.\u003c\/li\u003e\n  \u003cli\u003eIdeal for hard-to-reach filters where strap or cap wrenches won’t fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: technicians and home mechanics who service a variety of cars, trucks, and equipment and need a compact, durable filter wrench that fits many diameters and drive tools. If you regularly face stuck filters, limited access under engine covers, or shop inventory constraints, this BILITOOLS adjustable 3-jaw set gives the versatility and strength to remove and install filters without carrying a drawer of fixed-size cups.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey product details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: 40# carbon steel for high strength and durability.\u003c\/li\u003e\n  \u003cli\u003eSize coverage: 63mm–102mm and 75mm–130mm.\u003c\/li\u003e\n  \u003cli\u003eDrive compatibility: 3\/8\" and 1\/2\" ratchets, breaker bars, and 21mm wrench via adapter.\u003c\/li\u003e\n  \u003cli\u003eDesign: self-tightening three-jaw mechanism for automatic grip under torque.\u003c\/li\u003e\n  \u003cli\u003eIdeal uses: automotive, light-truck, and equipment oil filter removal\/installation in tight spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePackage tip: keep the adapter attached to the larger or smaller wrench depending on the jobs you do most; store both pieces together so you have immediate coverage for most filter diameters.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What filter sizes does this wrench fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits 63mm–102mm and 75mm–130mm filters, covering most common spin-on and cartridge filters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use it with my 3\/8\" ratchet?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the set works with 1\/2\" drives and includes a detachable adapter for 3\/8\" ratchets.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55167083151703,"sku":"B0BPGD5ND2","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-view-wrench-set.jpg?v=1790376753"},{"product_id":"bilitools-flip-lug-nut-socket-set-5pc-1-2-drive-thin-wall-flip-sockets-metric-sae-impact-rated","title":"BILITOOLS Flip Lug Nut Socket Set 5pc — 1\/2\" Drive Thin-Wall Flip Sockets (Metric \u0026 SAE) Impact-Rated","description":"\u003cp\u003e\u003cstrong\u003eThe BILITOOLS 5pc Flip Lug Nut Socket Set is a compact, dual-metric\/SAE impact-ready kit designed to remove and install wheel lug nuts in tight spaces without damaging the nut finish.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're a home mechanic, a professional technician, or a roadside responder, this set combines thin-wall construction with flip-style sockets to reach recessed wheel nuts. Made from chrome molybdenum steel and supplied in a molded plastic case, the kit balances strength and organization so you can work faster with less setup and fewer tool swaps.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the flip design improve access to recessed wheel nuts?\u003c\/h3\u003e\n\u003cp\u003eThe flip lug design lets you switch between metric and SAE profiles without needing separate sockets for each standard, saving space in your toolbox and on the job. Because each socket is thin-walled, they slide into tight recesses behind wheel covers and inside deep wheel wells where standard sockets won't fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlip sockets combine two sizes in one body for quick switching.\u003c\/li\u003e\n  \u003cli\u003eThin-wall geometry accesses recessed and confined lug nuts.\u003c\/li\u003e\n  \u003cli\u003e1\/2\" drive compatibility fits common impact wrenches and air ratchets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and drive features protect fasteners and tools?\u003c\/h3\u003e\n\u003cp\u003eThese sockets are forged from chrome molybdenum steel, a material chosen for high strength and resistance to the shock loads produced by impact tools. The 6-point flank drive configuration focuses torque on the flat sides of the lug nut rather than the corners, reducing the chance of rounding the fastener.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChrome molybdenum construction for impact durability.\u003c\/li\u003e\n  \u003cli\u003e6-point flank drive reduces fastener round-off risk.\u003c\/li\u003e\n  \u003cli\u003eLaser-etched size markings remain readable under heavy use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich sizes are included and how are they organized?\u003c\/h3\u003e\n\u003cp\u003eThe set includes both common metric and SAE flip sockets to cover a broad range of vehicles and aftermarket wheels. Each socket is laser-etched with its size, and the included plastic storage case is stamped with size markings for quick identification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMetric sizes: 17 mm, 19 mm, 21 mm, 22 mm.\u003c\/li\u003e\n  \u003cli\u003eSAE sizes: 3\/4\", 13\/16\", 7\/8\", 15\/16\".\u003c\/li\u003e\n  \u003cli\u003eDurable plastic case keeps sockets secure and labeled for organization.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use these sockets with my impact wrench safely?\u003c\/h3\u003e\n\u003cp\u003eYes — the sockets are designed for 1\/2\" drive impact tools such as electric or pneumatic impact wrenches and air ratchets. Their material and thin-wall design are engineered to tolerate impact loading while offering the access benefits you need for wheel work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 1\/2\" drive impact wrenches and air ratchets.\u003c\/li\u003e\n  \u003cli\u003eEngineered for repeated impact applications without deforming.\u003c\/li\u003e\n  \u003cli\u003eThin wall and flip feature minimize the need for extensions or adapters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This BILITOOLS flip lug nut socket set is aimed at automotive DIYers, professional mechanics, tire technicians, and emergency roadside personnel who need a compact, reliable way to service wheels with recessed or hard-to-reach lug nuts. If you use a 1\/2\" drive impact tool and want a space-saving combo of metric and SAE sizes with impact-rated construction and organized storage, this kit is suited to that workflow.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these sockets safe for impact wrenches?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The sockets are made from chrome molybdenum steel and designed for 1\/2\" drive impact tools.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What sizes are included in this kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Includes metric 17, 19, 21, 22 mm and SAE 3\/4\", 13\/16\", 7\/8\", 15\/16\" flip sockets.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55167239291223,"sku":"B0B6C1BTW3","price":58.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-packaging_31cf019f-7626-4568-83e1-3619fb88054c.jpg?v=1790379641"},{"product_id":"bilitools-cylinder-head-stand-holder-2-piece-yellow-zinc-plated-9-height-carbon-steel-support","title":"BILITOOLS Cylinder Head Stand Holder — 2-Piece Yellow Zinc-Plated, 9\" Height Carbon-Steel Support","description":"\u003cb\u003eBILITOOLS 2-piece cylinder head stand is a stable, elevated bench support that holds engine cylinder heads securely for valve, spring and porting work.\u003c\/b\u003e\n\n\u003cp\u003eIf you service or rebuild cylinder heads, this two-piece engine head stand lets you lift and angle the head off the bench for clear access to valves, springs, combustion chambers and ports. Each stand is independent so you can position supports to match the head’s bolt-hole spacing. Built from carbon steel with a zinc-plated finish, the stands resist corrosion and give a rigid platform for cleaning, inspection and light machining tasks.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the two-piece design make head work easier?\u003c\/h3\u003e\n\u003cp\u003eThe pair of independent stands lets you customize support points to fit different head lengths and bolt patterns. By separating the posts, you can center support near load-bearing areas and avoid stress on thin cast sections. This arrangement also makes it quick to rotate or reposition the head during disassembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo separate stands for variable spacing and better balance\u003c\/li\u003e\n  \u003cli\u003eOpen-frame layout gives unobstructed access around the head\u003c\/li\u003e\n  \u003cli\u003eQuick repositioning to work on different sections without changing setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these stands fit my cylinder head bolt holes?\u003c\/h3\u003e\n\u003cp\u003eThe stands use tapered mounting posts designed to seat into common bolt holes and accept a range of diameters. They work with many automotive cylinder heads, but compatibility depends on the head’s bolt-hole size and position. Always check the head’s mounting holes before using the posts to ensure stable contact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTapered posts accommodate multiple bolt-hole diameters\u003c\/li\u003e\n  \u003cli\u003eVerify hole diameter and spacing on your head before mounting\u003c\/li\u003e\n  \u003cli\u003eNot intended as a substitute for engine hoists or full engine stands\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat height and stability can I expect during repairs?\u003c\/h3\u003e\n\u003cp\u003eEach stand measures about 9 inches (230 mm) high with a 9-inch base, lifting the head well above the bench for comfortable access. The rigid carbon-steel construction and broad base reduce rocking and tipping while you work on valves, springs and ports. For heavier heads or aggressive machining, use additional support or a dedicated workbench as needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e9\" working height for easier reach into chambers and valve seats\u003c\/li\u003e\n  \u003cli\u003eWide base length improves leverage resistance during bench tasks\u003c\/li\u003e\n  \u003cli\u003eYellow zinc plating helps resist corrosion in workshop environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use the stand safely for routine head service?\u003c\/h3\u003e\n\u003cp\u003ePlace the stands so posts sit in structurally sound bolt holes, then center the head across both supports to distribute weight evenly. Use padding or a thin gasket if needed to protect machined surfaces, and avoid prying directly against the posts. Inspect the stands periodically for wear, and never exceed safe handling practices for heavy components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupport through solid bolt holes and check alignment before work\u003c\/li\u003e\n  \u003cli\u003eUse soft material to protect finished surfaces where required\u003c\/li\u003e\n  \u003cli\u003eKeep stands clean and inspect for bents, cracks or loose plating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The BILITOOLS 2-piece cylinder head stand is made for home mechanics, small engine shops and DIY engine builders who need a compact, adaptable support system for bench-level cylinder head work. It’s useful for valve spring service, cleaning, inspection, porting prep and light assembly tasks where a stable, elevated platform speeds repair work without a full-size engine stand.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these stands compatible with all engine heads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many automotive heads but compatibility depends on bolt-hole diameter and spacing; check hole size before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the stands for heavy machining or milling?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They suit cleaning, inspection and light work; for heavy machining use a dedicated fixture or additional support.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55167259771223,"sku":"B0B5DXJ8CH","price":55.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-cylinder-head-stand-front-view.jpg?v=1790380530"},{"product_id":"bilitools-23pc-drain-plug-socket-set-3-8-drive-chrome-vanadium-extensions-t-bar","title":"BILITOOLS 23pc Drain Plug Socket Set 3\/8\" Drive — Chrome Vanadium, Extensions \u0026 T-bar","description":"\u003cstrong\u003eBILITOOLS 23-piece drain plug socket set is a compact, vehicle-compatible toolkit engineered to remove and install oil sump, differential and gearbox drain and filler plugs with a 3\/8\" drive.\u003c\/strong\u003e\n\n\u003cp\u003eThis durable kit gathers the most commonly used hex, square, spline, torx and triangle sockets in one organized case so you can access fasteners on modern cars, vans and light commercial vehicles. Built from chrome vanadium steel with a plated finish, the set includes extension bars and a sliding T-bar to reach recessed plugs and apply extra leverage without stretching your toolbox. It’s tailored to popular makes — from BMW and Mercedes-Benz to Toyota and Volkswagen — and aimed at DIYers, mobile mechanics and workshop professionals who need a reliable, compact solution.\u003c\/p\u003e\n\n\u003ch3\u003eWhich plug types and sizes are included?\u003c\/h3\u003e\n\u003cp\u003eThe set contains a wide variety of socket profiles to fit common drain and filler plugs across many vehicle brands. You’ll find both metric and imperial sizes plus specialty profiles for less common fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e7 hex sockets: 8, 9, 10, 12, 13, 14, 17 mm\u003c\/li\u003e\n  \u003cli\u003e9 square sockets: 5\/16\", 3\/8\", 7, 8, 10, 11, 12, 13, 14 mm\u003c\/li\u003e\n  \u003cli\u003e1 spline socket M16, 1 Torx T45, 1 triangle 10 mm and one extra 10 mm socket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this set help reach hard-to-access drain plugs?\u003c\/h3\u003e\n\u003cp\u003eAccessing deep or recessed drain and filler plugs is simpler with the included extensions and sliding T-bar. The kit provides both reach and leverage so you can work in tight wheel wells, under engine pans and around differential housings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\" and 6\" extension bars for recessed fasteners\u003c\/li\u003e\n  \u003cli\u003eSliding T-bar for controlled torque and better turning leverage\u003c\/li\u003e\n  \u003cli\u003e3\/8\" drive compatibility with common ratchets and breakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this set robust enough for frequent garage use?\u003c\/h3\u003e\n\u003cp\u003eYes — the components are manufactured from chrome vanadium steel and finished with chrome plating to resist wear and corrosion. The sockets are made to withstand repeated use while maintaining fit, reducing rounding of bolts and plugs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-grade chrome vanadium construction for strength\u003c\/li\u003e\n  \u003cli\u003eChrome-plated finish to prevent rust and ease cleaning\u003c\/li\u003e\n  \u003cli\u003eCompact carrying case keeps sockets organized and protected\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and brands will this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe set covers plug profiles commonly found on many modern passenger cars and light commercial vehicles. It’s not exhaustive, but it supports a long list of manufacturers and model ranges that use these standardized plug types.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible examples: BMW, Mercedes-Benz, Volkswagen, Toyota, Ford, Honda\u003c\/li\u003e\n  \u003cli\u003eAlso supports: Citroën, Fiat, Lancia, Mazda, Nissan, Peugeot, Renault, Saab, Vauxhall\/Opel\u003c\/li\u003e\n  \u003cli\u003eUseful for engines, gearboxes, differentials and rear axle drain\/filler plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The BILITOOLS 23-piece drain plug socket set is designed for DIY mechanics who perform routine oil and gearbox service, mobile technicians who need a compact, all-in-one plug solution, and professional garages that want a dedicated kit to reach and turn sump and differential plugs quickly. If you often work undercars or service multiple brands, this set reduces the need to hunt for individual specialty sockets and gives reliable access to hard-to-reach fasteners.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this set fit my Volkswagen oil sump plug?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Likely yes—common Volkswagen sump plugs use sizes included here. Check your plug profile and size against the kit list before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the extension bars with other 3\/8\" tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The included 3\" and 6\" extensions and sliding T-bar work with standard 3\/8\" drive tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55167493800279,"sku":"B0BBLYTQJ4","price":61.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-set-front-case.jpg?v=1790387613"},{"product_id":"bilitools-15-piece-universal-ratcheting-serpentine-belt-tool-set-14-extension-low-profile-sockets-for-tight-engine-bays","title":"BILITOOLS 15-Piece Universal Ratcheting Serpentine Belt Tool Set — 14\" Extension, Low-Profile Sockets for Tight Engine Bays","description":"\u003cstrong\u003eA 15-piece universal ratcheting serpentine belt tool set designed to remove and install belts on vehicles with spring-loaded tensioner pulleys.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact kit from BILITOOLS combines a ratcheting wrench, a long extension arm, multiple sockets and crowfoot wrenches to reach tight belt tensioners and simplify serpentine belt service. Built for both home mechanics and professional technicians, the set balances reach, leverage and low-profile components so you can access recessed pulleys without dismantling surrounding parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this set reach tight or recessed belt tensioners?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit includes a 14\" extension arm and a specially designed ratcheting wrench that mates with included low-profile sockets and adapters to fit into confined engine bays. The long reach and narrow socket profiles let you work around accessories and brackets while keeping hand clearance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e14\" extension arm for extra reach into engine bays\u003c\/li\u003e\n  \u003cli\u003eEight low-profile metric sockets (13–19 mm) for narrow access points\u003c\/li\u003e\n  \u003cli\u003eMultiple square drive adapters (3\/8\", 1\/2\", 3\/4\") for tool compatibility\u003c\/li\u003e\n  \u003cli\u003eRatcheting wrench with 19 mm and 7\/8\" female drive to accept extensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the ratcheting design useful for serpentine belts?\u003c\/h3\u003e\n\n\u003cp\u003eThe ratcheting mechanism lets you relieve tension incrementally and hold the tensioner in an open position while you slip the belt off or on. This controlled motion reduces the need for a separate holding tool and speeds up repeatable belt swaps during diagnostics or maintenance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRatcheting wrench offers controlled back-and-forth motion\u003c\/li\u003e\n  \u003cli\u003eFemale drives accept the extension arm for leverage\u003c\/li\u003e\n  \u003cli\u003eCrowfoot wrenches for awkward angles where a socket won't fit\u003c\/li\u003e\n  \u003cli\u003eCompatible adapters allow use with common drive tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicle types and jobs is this tool set suited for?\u003c\/h3\u003e\n\n\u003cp\u003eThis universal kit addresses most vehicles equipped with spring-loaded belt tensioners found on passenger cars, light trucks and many SUVs. It's intended for belt replacement, tensioner service, accessory removal and routine engine-bay maintenance when space is limited.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePassenger cars, light trucks and many SUVs with spring-loaded tensioners\u003c\/li\u003e\n  \u003cli\u003eBelt removal and installation, alternator\/accessory replacement\u003c\/li\u003e\n  \u003cli\u003eService tasks where low-profile sockets and long reach are required\u003c\/li\u003e\n  \u003cli\u003eQuick shop jobs and at-home repairs where disassembly would otherwise be needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat exactly is included in the 15-piece BILITOOLS kit?\u003c\/h3\u003e\n\n\u003cp\u003eThe set bundles drive components, metric sockets and crowfoot wrenches that together provide flexibility when working on various tensioner designs. Everything nests compactly for storage while keeping the most common sizes on hand.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDrive tools: 14\" extension arm, ratcheting wrench with 19 mm and 7\/8\" female drive\u003c\/li\u003e\n  \u003cli\u003eSquare adapters: 3\/8\", 1\/2\" and 3\/4\"\u003c\/li\u003e\n  \u003cli\u003eSockets: 13, 14, 15, 16, 17, 18, 19 mm (low-profile)\u003c\/li\u003e\n  \u003cli\u003eCrowfoot wrenches: 13 mm, 14 mm, 15 mm for angled access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The BILITOOLS 15-piece Universal Ratcheting Serpentine Belt Tool Set is aimed at DIY mechanics who want a single compact kit to handle most spring-loaded tensioners, and at professional technicians who need low-profile options for tight engine compartments. If you frequently replace belts, service accessories, or encounter recessed tensioners, this set reduces disassembly and saves time when working in confined spaces.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my vehicle's belt tensioner?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit is universal for most spring-loaded tensioners; check for 13–19 mm engagement sizes and accessible ratchet drive clearances.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these tools with other ratchets or breakers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Included 3\/8\", 1\/2\" and 3\/4\" adapters make the set compatible with common drive tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55167559172439,"sku":"B09PYKZ2KZ","price":61.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-packaging_06f74c4b-618e-4100-915b-2a79d5a69e1a.jpg?v=1790388700"},{"product_id":"bilitools-oil-funnel-kit-4pc-bendable-steel-spout-with-2-hoses-flexible-pvc-funnel-red-for-mess-free-oil-and-fluid-fills","title":"BILITOOLS Oil Funnel Kit — 4pc Bendable Steel Spout with 2 Hoses \u0026 Flexible PVC Funnel (Red) for Mess-Free Oil and Fluid Fills","description":"\u003cp\u003e\u003cstrong\u003eThe BILITOOLS 4-piece Oil Funnel Kit is a reusable set with a bendable steel spout, two long detachable hoses, and a flexible PVC funnel built to guide automotive fluids into tight or deep fill ports.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you change your own oil, top off transmission fluid, or transfer coolant, this kit combines a rigid, positionable metal neck with long hose extensions and a collapsible red funnel to create controlled, mess-free fueling and draining paths. The components resist cracking, corrosion, and extreme temperatures, offering a durable, compact solution for home garages and professional stalls alike.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the bendable metal spout improve hard-to-reach fills?\u003c\/h3\u003e\n\u003cp\u003eThe carbon-steel bendable spout lets you shape the funnel tip to match offset or recessed fill ports that standard funnels can't access. Once bent, it holds its shape to direct fluid precisely where you need it, reducing spills and overfills during filling tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSturdy carbon-steel construction holds position once formed\u003c\/li\u003e\n  \u003cli\u003eTapered end fits many filler neck openings\u003c\/li\u003e\n  \u003cli\u003eWorks with included stainless filter to catch debris\u003c\/li\u003e\n  \u003cli\u003eIdeal for angled or recessed engine openings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan the long hoses be used for transmission or deep fill applications?\u003c\/h3\u003e\n\u003cp\u003eYes — the kit includes two interchangeable hoses (approximately 14.6\" and 26.2\") that attach to the metal spout to reach deep or offset transmission fill ports. Their length provides a controlled channel so you can pump or pour fluid without needing to lift heavy jugs into awkward positions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e26.2\" hose reaches deeply recessed ports\u003c\/li\u003e\n  \u003cli\u003e14.6\" hose offers a shorter run for compact areas\u003c\/li\u003e\n  \u003cli\u003eQuick-connect fitment for fast hose changes\u003c\/li\u003e\n  \u003cli\u003eHelps prevent spills when adding viscous fluids\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat advantages does the flexible red funnel add for routine maintenance?\u003c\/h3\u003e\n\u003cp\u003eThe PVC flexible funnel bends, folds, or rolls to form a custom fill path or drain chute, making it simple to maneuver around engine components and hoses. Its collapsible nature makes storage easy, and the material tolerates a wide temperature range for multiple fluid types.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFolds flat for compact storage between uses\u003c\/li\u003e\n  \u003cli\u003eFlexible design adapts to awkward angles and tight spaces\u003c\/li\u003e\n  \u003cli\u003eRated for temperatures from -31°F to 221°F\u003c\/li\u003e\n  \u003cli\u003eSuitable for engine oil, coolant, and other automotive fluids\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reusable is this oil change kit?\u003c\/h3\u003e\n\u003cp\u003eBuilt from carbon steel, stainless filtering, and robust PVC, the kit is made to withstand repeated use in home and professional settings. Materials resist cracking, corrosion, and heat, so you can rely on these tools across many service intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarbon steel spout resists deformation under normal use\u003c\/li\u003e\n  \u003cli\u003eStainless filter prevents particulate contamination\u003c\/li\u003e\n  \u003cli\u003ePVC funnel tolerates common garage chemicals and temperatures\u003c\/li\u003e\n  \u003cli\u003eReplaces single-use funnels and disposable adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS Oil Funnel Kit is aimed at DIY mechanics, home garage owners, and professional technicians who need a compact, reliable system for filling and transferring automotive fluids into awkward or deep ports. It’s practical for routine oil changes, transmission top-ups, coolant fills, and any task where controlled fluid routing and reduced mess matter.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the metal spout fit most vehicle filler necks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The tapered carbon-steel spout fits many common filler openings, but check neck diameter for exact fit before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the flexible funnel with hot coolant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the PVC funnel is rated -31°F to 221°F and is suitable for typical coolant temperatures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55167575294295,"sku":"B0FK55CQVK","price":46.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-packaging-and-components.jpg?v=1790388891"},{"product_id":"bilitools-1l-vacuum-brake-bleeder-kit-compressor-powered-solo-brake-clutch-bleeding-abs-compatible","title":"BILITOOLS 1L Vacuum Brake Bleeder Kit — Compressor-Powered Solo Brake \u0026 Clutch Bleeding, ABS Compatible","description":"\u003cp\u003e\u003cstrong\u003eThe BILITOOLS 1L Universal Brake Bleeder Kit is a compressor-powered vacuum bleeder that lets one person safely and cleanly flush brake and clutch lines without a helper.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for DIY mechanics and professional shops, this 1-liter brake fluid bleeding kit uses compressor pressure (87–170 PSI \/ 6–12 bar) to create consistent vacuum flow through brake bleeder screws, drawing old fluid directly into a corrosion-resistant PE tank. It works with most brake fluid types, supports ABS-equipped systems, and includes a transparent hose so you can watch contaminant-heavy fluid evacuate. The kit’s silicone hoses and secure fittings reduce leaks, while the built-in hook enables hands-free operation during each wheel’s service.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the BILITOOLS bleeder make solo brake bleeding practical?\u003c\/h3\u003e\n\u003cp\u003eThe unit replaces the need for a second person to pump the brake pedal by using compressed air to pull fluid from the bleeder screw into the collection tank. Vacuum draw eliminates backflow and reduces the chance of introducing air back into the system, so you get a steady, professional purge with minimal monitoring.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperates at 87–170 PSI (6–12 bar) for stable suction.\u003c\/li\u003e\n  \u003cli\u003eOne-person setup with compressor connection and tank vacuum action.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in hanging hook frees your hands during operation.\u003c\/li\u003e\n  \u003cli\u003ePrevents backflow for cleaner, more effective bleeding cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this bleeder work with ABS systems and different brake fluids?\u003c\/h3\u003e\n\u003cp\u003eYes—this vacuum bleeder is compatible with most automotive ABS modules and modern brake fluid types. Because the kit draws directly from the bleeder screw and does not rely on special reservoir adapters, it accommodates a broad range of vehicles while limiting contamination risks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect bleed from the bleeder screw suits ABS and non-ABS systems.\u003c\/li\u003e\n  \u003cli\u003ePE tank resists corrosion from DOT 3\/4 and similar fluids.\u003c\/li\u003e\n  \u003cli\u003eFlexible silicone hoses form secure seals on bleeder nipples.\u003c\/li\u003e\n  \u003cli\u003eTransparent hose allows visual confirmation of fluid color and flow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the material and durability highlights to expect?\u003c\/h3\u003e\n\u003cp\u003eThe collection vessel is constructed from polyethylene (PE), chosen for its resistance to brake fluid corrosion. Hoses are made of flexible silicone to maintain a leak-free connection under vacuum conditions, and fittings are designed for repeated workshop use, making the kit suitable for frequent maintenance tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1L PE tank built to resist brake fluid degradation.\u003c\/li\u003e\n  \u003cli\u003eSilicone hoses maintain flexibility without cracking.\u003c\/li\u003e\n  \u003cli\u003eSecure fittings reduce the likelihood of spills or leaks.\u003c\/li\u003e\n  \u003cli\u003eTransparent drain hose for monitoring fluid clarity during bleeding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the kit reduce mess and speed up brake jobs?\u003c\/h3\u003e\n\u003cp\u003eBecause the bleeder pulls fluid directly into a sealed tank and uses a clear hose, you won’t need reservoir caps or improvised containers that can spill. The vacuum action speeds the evacuation of old fluid, and the hanging hook enables tidy, hands-free runs from wheel to wheel so you can complete the job faster and cleaner.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSealed 1L tank collects fluid for safe disposal.\u003c\/li\u003e\n  \u003cli\u003eTransparent hose reveals when lines are flushed clean.\u003c\/li\u003e\n  \u003cli\u003eHands-free hook keeps workspace organized.\u003c\/li\u003e\n  \u003cli\u003eReduced reliance on assistants cuts total job time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS 1L Universal Vacuum Brake Bleeder Kit is made for home mechanics who perform routine brake or clutch maintenance alone, mobile technicians who need a compact, reliable tool, and professional garages seeking a corrosion-resistant, hands-free bleeding solution that works across a wide range of vehicles.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this bleeder on vehicles with ABS?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit draws from the bleeder screw and is compatible with most ABS-equipped braking systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What air pressure does the tool require?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It operates between 87–170 PSI (6–12 bar); use a regulated compressor within that range.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55167615762775,"sku":"B0FNWW7CGB","price":41.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-view-kit.jpg?v=1790389652"},{"product_id":"bilitools-adjustable-3-jaw-harmonic-balancer-puller-black-oxide-45-steel-compact-case","title":"BILITOOLS Adjustable 3-Jaw Harmonic Balancer Puller — Black Oxide 45# Steel, Compact Case","description":"\u003cp\u003e\u003cb\u003eThe BILITOOLS Adjustable 3-Jaw Harmonic Balancer Puller is a heavy-duty, vehicle-compatible tool kit designed to remove crankshaft dampers safely and evenly in confined engine spaces.\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for professional mechanics and home technicians alike, this 3-jaw balancer puller delivers centered, controlled extraction of harmonic balancers and crankshaft dampers without the common drawbacks of two-arm or generic pulley pullers. Built from 45# steel with a corrosion-resistant black oxide finish, the kit includes multiple forcing rods, a forcing screw, and a compact storage case so you can tackle a wide range of Chevy, GM, Chrysler, Ford, Cadillac, and Mitsubishi applications without removing major components like the radiator.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tool remove balancers without damaging the crankshaft?\u003c\/h3\u003e\n\u003cp\u003eThe BILITOOLS 3-jaw configuration applies even radial force around the balancer, keeping the part centered during extraction. That minimizes leaning, slipping, or uneven pressure that can mar crankshaft threads or surrounding engine parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBalanced three-jaw layout for concentric pulling\u003c\/li\u003e\n  \u003cli\u003eForcing screw transmits steady axial force for controlled removal\u003c\/li\u003e\n  \u003cli\u003eMultiple rod lengths reduce stress by matching damper depth\u003c\/li\u003e\n  \u003cli\u003eBlack oxide finish resists corrosion for long-term consistent performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this puller in tight engine compartments?\u003c\/h3\u003e\n\u003cp\u003eYes — the puller is optimized for confined spaces so you rarely have to remove the radiator or other major components. The quick \"Pull-Move-Insert\" clevis pin setup lets you position and adjust the jaws in seconds, keeping service time and disassembly to a minimum.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact jaw design fits narrow clearances\u003c\/li\u003e\n  \u003cli\u003eClevis pin mechanism enables fast jaw repositioning\u003c\/li\u003e\n  \u003cli\u003eFour forcing rod sizes (100, 135, 165, 185 mm) adapt to varying depths\u003c\/li\u003e\n  \u003cli\u003eIncludes storage case to keep parts organized for field use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and balancer types are compatible with this kit?\u003c\/h3\u003e\n\u003cp\u003eThe BILITOOLS puller works with a broad range of common harmonic damper applications, covering many domestic and select import models. It’s not a universal fit for every vehicle, but it supports many Chevy, GM, Chrysler, Ford, Cadillac, and Mitsubishi crankshaft dampers encountered in routine repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for common passenger car, SUV, van, and pickup dampers\u003c\/li\u003e\n  \u003cli\u003eAdjustable jaw spacing for varied balancer diameters\u003c\/li\u003e\n  \u003cli\u003eForcing rods extend reach for deep-mounted dampers\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle-specific service data for exact compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and components are included in the kit?\u003c\/h3\u003e\n\u003cp\u003eThe set is fabricated from heavy-duty 45# steel and finished with black oxide to improve durability and resist wear. The kit contains the primary 3-jaw puller body, a hardened forcing screw, four different-length forcing rods, and a molded storage case for neat transport and protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × 3-jaw puller body, heavy-duty 45# steel\u003c\/li\u003e\n  \u003cli\u003e1 × hardened forcing screw for reliable axial force\u003c\/li\u003e\n  \u003cli\u003e4 × forcing rods: 100 mm, 135 mm, 165 mm, 185 mm\u003c\/li\u003e\n  \u003cli\u003eDurable storage case for organized transport and protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: If you remove harmonic balancers or crankshaft dampers regularly — whether as an automotive technician, restoration hobbyist, or DIY mechanic — the BILITOOLS Adjustable 3-Jaw Harmonic Balancer Puller offers a robust, space-conscious solution. It’s especially useful when working on domestic engines or select imports where balanced, controlled extraction and minimal disassembly are priorities.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this puller damage crankshaft threads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the balanced 3-jaw design distributes force evenly to reduce tilting and protect threads when used correctly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit fit deep-mounted dampers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it includes four forcing rods (100–185 mm) to reach a variety of damper depths.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55167631851863,"sku":"B0B2DR2FF6","price":60.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-view-balanced-3-jaw-puller.jpg?v=1790389973"},{"product_id":"bilitools-1-2-inch-drive-impact-lug-nut-socket-set-5pc-15-17-19-21-22mm-thin-wall-cr-mo-with-nylon-sleeve","title":"BILITOOLS 1\/2-inch Drive Impact Lug Nut Socket Set, 5pc 15\/17\/19\/21\/22mm — Thin-wall Cr‑Mo with Nylon Sleeve","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS 5-piece 1\/2\" drive impact lug nut socket set gives you five thin-wall, color-coded sockets (15\/17\/19\/21\/22mm) built for impact tools and safe alloy-wheel removal.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit is designed for anyone who removes wheels regularly — mechanics, DIYers, or roadside techs — and needs durable sockets that fit in tight spaces without scuffing alloy rims. Each socket is made from chrome molybdenum steel for impact-rated strength and finished with a rotatable nylon sleeve to protect wheel paint. Color-coding speeds size selection, and the 6-point flank drive reduces the chance of rounding lug nuts.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this set protect alloy wheels while I work?\u003c\/h3\u003e\n\u003cp\u003eThe sockets include a removable or rotatable nylon protective shell that sits between the metal socket and your wheel surface to prevent scratches and paint damage. The thin-wall design also reduces contact area while still allowing the socket to engage the lug nut fully.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRotatable nylon sleeve cushions the wheel finish during use\u003c\/li\u003e\n  \u003cli\u003eThin-wall profile minimizes interference with wheel barrels\u003c\/li\u003e\n  \u003cli\u003eColor-coded sleeves keep protective covers visible and aligned\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these sockets survive heavy use with an impact wrench?\u003c\/h3\u003e\n\u003cp\u003eYes — the sockets are forged from chrome molybdenum (Cr-Mo) steel, a material commonly used for impact-rated tools because it handles torque and shock better than standard chrome vanadium. They’re designed specifically for 1\/2\" drive impact wrenches and air ratchets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChrome molybdenum construction for toughness and fatigue resistance\u003c\/li\u003e\n  \u003cli\u003e1\/2\" drive compatibility for most professional impact tools\u003c\/li\u003e\n  \u003cli\u003e6-point flank drive reduces fastener damage under high torque\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich sizes are included and how do I pick the right one quickly?\u003c\/h3\u003e\n\u003cp\u003eThis kit contains five common lug nut sizes: 15mm, 17mm, 19mm, 21mm, and 22mm. Each socket has a distinct sleeve color for fast visual selection so you can grab the correct size without testing multiple sockets on the wheel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e15mm — purple sleeve\u003c\/li\u003e\n  \u003cli\u003e17mm — blue sleeve\u003c\/li\u003e\n  \u003cli\u003e19mm — yellow sleeve\u003c\/li\u003e\n  \u003cli\u003e21mm — red sleeve\u003c\/li\u003e\n  \u003cli\u003e22mm — black sleeve\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these sockets work in cramped locations or recessed lugs?\u003c\/h3\u003e\n\u003cp\u003eThe thin-wall construction is specifically engineered to access recessed lug nuts and tight wheel wells where thicker sockets can't reach. Their shorter 3.3\" length and slim profile help when space is limited, while maintaining the strength needed for impact use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThin-wall design for narrow clearances and recessed lug nuts\u003c\/li\u003e\n  \u003cli\u003eShort 3.3\" length balances access and leverage\u003c\/li\u003e\n  \u003cli\u003eColor-coded sleeves remain easy to find in busy toolboxes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This BILITOOLS set is suited to professional technicians, mobile tire services, and car owners who change tires or rotate wheels themselves and want impact-rated sockets that protect alloy finishes. If you need quick size identification, reliable impact performance, and minimized wheel damage in tight spaces, this compact five-piece kit covers the most common lug sizes used on passenger vehicles.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these sockets safe to use with an impact wrench?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are forged from chrome molybdenum steel and rated for 1\/2\" drive impact wrenches and air ratchets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these sockets scratch my alloy wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The sockets have rotatable nylon sleeves designed to protect alloy wheel paint from scratches during use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55167656362327,"sku":"B09WTZC578","price":60.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-packing-and-sockets.jpg?v=1790390392"},{"product_id":"bilitools-5pc-impact-lug-nut-socket-set-1-2-drive-non-marring-thin-wall-color-coded-6-point","title":"BILITOOLS 5pc Impact Lug Nut Socket Set 1\/2\" Drive - Non-Marring Thin-Wall, Color-Coded 6-Point","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS 5-piece impact lug nut socket set is a color-coded, thin-wall 1\/2\" drive kit designed to remove and install alloy wheel lug nuts without scratching wheels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis set bundles five commonly used sizes in a compact assortment so you can work faster with an impact wrench or air ratchet while protecting painted rims. Each socket is forged from chrome‑molybdenum for strength, fitted with a rotatable nylon sleeve to prevent damage to wheel finishes, and finished with a 6-point flank-drive geometry for reliable torque transfer. The sockets are thin-wall to reach lug nuts in tight wells and are color-coded for quick identification under low light or in the shop.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this socket set protect my alloy wheels?\u003c\/h3\u003e\n\n\u003cp\u003eThe sockets have removable, rotatable nylon shells that act as a buffer between metal and painted surfaces, reducing the risk of scuffs or chipping during removal or installation. The protective sleeve spins independently of the socket body so sliding or turning the socket won’t drag paint across the rim surface.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRotatable nylon protective sleeve prevents direct metal-to-paint contact\u003c\/li\u003e\n  \u003cli\u003eThin-wall design reaches recessed lug nuts without rubbing the wheel lip\u003c\/li\u003e\n  \u003cli\u003eColor-coded sleeves reduce risk of using wrong size and causing slips\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these sockets stand up to impact tools and heavy use?\u003c\/h3\u003e\n\n\u003cp\u003eYes — each socket is manufactured from chrome‑molybdenum alloy steel for high strength and wear resistance under impact loading. The 1\/2\" drive base accepts standard impact wrenches and air ratchets, while the 6-point flank-drive profile concentrates force on the flats of the fastener to minimize rounding.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eChrome‑molybdenum construction for durability under repeated impacts\u003c\/li\u003e\n  \u003cli\u003e6-point drive geometry reduces fastener rounding and improves grip\u003c\/li\u003e\n  \u003cli\u003eCompatible with 1\/2\" impact wrenches and heavy-duty ratchets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these sockets useful in tight or recessed lug wells?\u003c\/h3\u003e\n\n\u003cp\u003eThe sockets feature a thin-wall profile and 3.3\" length that make it easier to access lug nuts recessed behind brake components or deep wheel centers. The reduced outer diameter lets the socket slip into narrow openings where standard sockets cannot reach, helping you finish jobs faster and with less disassembly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThin-wall construction improves access in cramped wheel wells\u003c\/li\u003e\n  \u003cli\u003e3.3\" socket length balances reach with clearance under the wheel\u003c\/li\u003e\n  \u003cli\u003eColor-coded sizes speed selection when working in dim garages\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich sizes are included and how do I pick the right one?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit contains five of the most common lug nut sizes for passenger vehicles: 17mm, 19mm, 21mm, 13\/16\", and 7\/8\". Each socket has a distinct colored sleeve for instant visual identification so you can grab the correct size without guessing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e17mm (blue), 19mm (yellow), 21mm (red), 13\/16\" (purple), 7\/8\" (orange)\u003c\/li\u003e\n  \u003cli\u003eMarked and color-coded for quick selection under time pressure\u003c\/li\u003e\n  \u003cli\u003eFits a 1\/2\" drive impact wrench or air ratchet for high-torque use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS 5-piece thin-wall impact lug nut set is intended for mechanics, tire shops, automotive DIYers, and fleet technicians who need reliable, wheel-safe sockets for routine tire changes, seasonal wheel swaps, or on‑the‑road repairs. It’s especially useful when working with alloy or painted wheels where avoiding scratches is a priority and when lug nuts sit recessed in tight spaces.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these sockets safe for painted alloy wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each socket has a rotatable nylon sleeve to prevent metal-to-paint contact and reduce the risk of scratching.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my impact wrench?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They use a 1\/2\" drive and are designed for impact wrenches and air ratchets compatible with that drive size.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55167733039447,"sku":"B09WTS3QXP","price":59.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-view-socket-set.jpg?v=1790392273"},{"product_id":"bilitools-windshield-removal-tool-kit-7pcs-with-72ft-cutting-wire-eva-case-heat-treated-steel","title":"BILITOOLS Windscreen Removal Tool Kit — 7PCS with 72ft Cutting Wire, EVA Case, Heat‑Treated Steel","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS 7PCS Windshield Removal Tool Kit is a complete set of purpose-built hand tools and 72 ft cutting wire designed to remove glued windshields, rear glass and quarter windows on older and classic vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit brings together a cutting wire system, T-style handles, a piercing awl, dedicated adhesive and panel tools, plus an EVA storage case so you have the right tool for each stage of removing bonded glass. It’s designed for body shops, restoration projects and mobile technicians working on vintage cars where factory-cut or bonded glass must be separated without damaging surrounding trim and panels.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the cutting wire system work for glued windshields?\u003c\/h3\u003e\n\u003cp\u003eThe 0.8 mm steel cutting wire feeds behind the bonded edge and, when pulled with the T-handles, severs butyl and urethane adhesives cleanly. The 13-inch piercing awl helps guide the wire through tight corners and long runs, improving control and reducing slips.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e72 ft of 0.8 mm steel cutting wire for multiple jobs\u003c\/li\u003e\n  \u003cli\u003eTwo wire T-handles provide a secure grip for consistent pulls\u003c\/li\u003e\n  \u003cli\u003ePiercing awl (13 in) to start the wire and reach recessed areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools are included to cut adhesive and remove trim safely?\u003c\/h3\u003e\n\u003cp\u003eAlongside the wire system, the kit includes a 9.3-inch adhesive cutter for slicing bonding material, a 10.8-inch panel removal tool for prying trim and moldings, and a pull scraper for clearing residual adhesive. Each tool’s shape and length are chosen to work around glass edges without stressing body panels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e9.3 in adhesive cutter for controlled adhesive slicing\u003c\/li\u003e\n  \u003cli\u003e10.8 in panel removal tool for trim and clip work\u003c\/li\u003e\n  \u003cli\u003ePull scraper with rope to help lift and clear sealant\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these tools durable and easy to store between jobs?\u003c\/h3\u003e\n\u003cp\u003eYes — shafts are heat-treated and chrome-plated to resist bending and corrosion while reinforced handles improve comfort during repeated pulls. The included EVA case organizes each piece and protects cutting wire during transport, keeping the set ready for mobile work or workshop storage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated chrome-plated steel shafts for strength and rust resistance\u003c\/li\u003e\n  \u003cli\u003eReinforced handles for better torque and reduced hand fatigue\u003c\/li\u003e\n  \u003cli\u003eCustom EVA case keeps all seven pieces neatly stored\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and tasks is this kit best suited for?\u003c\/h3\u003e\n\u003cp\u003eThis kit was made with older and classic cars in mind — many vintage vehicles use glued glass that requires manual separation rather than mechanical removal methods. It’s also useful for rear windows, tailgate glass and quarter windows during restorations or body repairs where preserving trim and paint is important.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClassic and vintage cars with bonded windshields and rear glass\u003c\/li\u003e\n  \u003cli\u003eAuto body shops, restoration projects, and mobile glass technicians\u003c\/li\u003e\n  \u003cli\u003eTasks: windshield removal, rear\/tailgate glass, quarter window work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS 7PCS Windshield Removal Tool Kit suits professional auto technicians, hobbyist restorers, and anyone performing glass removal on older vehicles that use adhesive bonding. If you need a portable, organized set with a long cutting wire and specialized hand tools to separate glass without harming surrounding trim, this kit delivers practical, durable solutions for repeated use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit remove bonded rear and quarter glass?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The wire system plus cutters and panel tools handle rear, tailgate and quarter windows on glued glass vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the cutting wire reusable for multiple jobs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 72 ft steel wire can be used across several removals until it frays or kinks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55168293437783,"sku":"B09PYJ9RY9","price":60.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-case.jpg?v=1790398545"},{"product_id":"bilitools-bearing-race-and-seal-driver-set-10-piece-metric-39-5-81mm-aluminum-adapters-knurled-handle","title":"BILITOOLS Bearing Race and Seal Driver Set — 10-Piece Metric 39.5–81mm, Aluminium Adapters \u0026 Knurled Handle","description":"\u003cp\u003e\u003cstrong\u003eThe BILITOOLS 10-piece metric bearing race and seal driver set installs bearing races and seals evenly and safely using nine metric adapters and a knurled driver handle.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you need precise, repeatable seating of bearing races or seals in automotive, motorcycle, or industrial hubs, the right driver set prevents misalignment and damage. This BILITOOLS kit covers a wide metric range from 39.5 mm up to 81 mm, combining two-sided adapters and a textured handle so you can match the tool to the part and control each tap with a mallet. The lightweight aluminum alloy adapters and a compact carrying case make the set convenient for mobile mechanics and home shops alike.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this set ensure even seating of bearings and seals?\u003c\/h3\u003e\n\u003cp\u003eThe adapters have two working faces—one flat and one tapered—so each piece contacts the part uniformly, reducing the chance of cocking the race or deforming the seal. Using the correct adapter size centers the force and the knurled handle gives you a stable striking surface for measured impacts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-sided adapters: flat side for seals, tapered side for bearing races.\u003c\/li\u003e\n  \u003cli\u003eClearly stamped metric sizes for quick selection.\u003c\/li\u003e\n  \u003cli\u003eKnurled handle for secure grip and controlled mallet strikes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich sizes are included and what parts will they fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains nine metric adapters: 39.5, 44.5, 50, 59, 63, 65, 72, 76 and 81 mm, plus a driver handle. That range covers many common wheel hubs, transmission bore sizes, and bearing races found on cars, light trucks, ATVs and motorcycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e39.5–50 mm sizes suit small to mid-size wheel bearings and motorcycle seals.\u003c\/li\u003e\n  \u003cli\u003e59–72 mm sizes handle many passenger vehicle and light-truck applications.\u003c\/li\u003e\n  \u003cli\u003e76 and 81 mm adapters fit larger hubs and some industrial bearings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and design features improve durability and control?\u003c\/h3\u003e\n\u003cp\u003eAdapters are machined from aluminum alloy to balance weight and strength so you can accurately position parts without adding heavy, unwieldy components. The driver handle’s knurling improves hand traction and the adapters’ dual-profile design offers versatility without extra tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy adapters: lightweight and corrosion-resistant.\u003c\/li\u003e\n  \u003cli\u003eDual-sided profile per adapter increases the set’s usefulness.\u003c\/li\u003e\n  \u003cli\u003eCompact storage case protects components and keeps sizes organized.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the kit safely and effectively?\u003c\/h3\u003e\n\u003cp\u003eSelect the adapter nearest the outer diameter of the race or seal so force is distributed evenly. Mount the adapter on the handle, seat the part squarely in its bore, and deliver measured taps with a rubber mallet until the component is fully seated.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch adapter size to part outer diameter for even force distribution.\u003c\/li\u003e\n  \u003cli\u003eUse a rubber or dead-blow mallet, not a steel hammer, to avoid damage.\u003c\/li\u003e\n  \u003cli\u003eCheck alignment often and re-seat if the part starts to tilt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS Bearing Race and Seal Driver Set is aimed at DIY mechanics, mobile technicians and small repair shops that need a compact, metric-focused driver kit. It’s especially useful when working on passenger cars, motorcycles, ATVs, light trucks and small industrial assemblies where controlled, even installation of bearings and seals matters to longevity and performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this set for both seals and bearing races?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each adapter has a flat side for seals and a tapered side for bearing races, allowing both tasks with the same adapter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the material strong enough for repeated shop use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Adapters are aluminum alloy for durable, lightweight service; suitable for regular garage and mobile-repair use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55168295305559,"sku":"B0CRZ1VLTK","price":61.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-packaging-bearing-driver-set.jpg?v=1790398663"},{"product_id":"bilitools-brake-bleeder-wrench-set-6-piece-7-12mm-kit-with-silicone-hose-one-way-valve","title":"BILITOOLS Brake Bleeder Wrench Set — 6-Piece 7–12mm Kit with Silicone Hose \u0026 One-Way Valve","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS Brake Bleeder Wrench Set is a six-piece mechanic kit (7, 8, 9, 10, 11, 12mm) that lets you open bleeder valves and collect fluid without removing wheels, using a silicone hose with a one-way check valve for clean, safe bleeding.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep brake and clutch hydraulic work tidy and efficient with a compact, color-coded wrench set designed for common caliper and wheel-cylinder valves. The kit combines six precisely sized, sealed wrenches with a flexible silicone tube and built-in non-return valve so you can drain fluid into a reservoir while preventing backflow. A molded storage case keeps the tools organized and ready for both home DIY and professional garage use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this set speed up brake bleeding jobs?\u003c\/h3\u003e\n\n\u003cp\u003eThe BILITOOLS set lets you access bleeder screws without repeatedly disconnecting hoses or removing wheels, reducing downtime and simplifying the process. Each wrench seals over the valve so you can turn and reposition it while the tube stays attached, cutting steps and mess. The non-return check valve prevents contaminated fluid from returning to the system.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSealed socket design fits over the bleeder screw for one-handed turning.\u003c\/li\u003e\n  \u003cli\u003eSilicone tube with check valve prevents backflow and contamination.\u003c\/li\u003e\n  \u003cli\u003eColor-coded wrench heads for quick size selection under the hood.\u003c\/li\u003e\n  \u003cli\u003eCompact case stores all pieces for faster access on the job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and systems are compatible with these wrenches?\u003c\/h3\u003e\n\n\u003cp\u003eThis six-size range covers many passenger cars, SUVs, light trucks and motorcycles with standard 7–12mm bleeder fittings. It works for both brake and clutch hydraulic systems, making it a versatile tool for routine maintenance and emergency repairs. Check your vehicle's bleeder screw size to confirm fit before use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits common bleeder sizes: 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.\u003c\/li\u003e\n  \u003cli\u003eSuitable for brake calipers, wheel cylinders, and clutch bleed points.\u003c\/li\u003e\n  \u003cli\u003eUseful for domestic and many import models—verify specific fit first.\u003c\/li\u003e\n  \u003cli\u003eCompact enough for motorcycle brake maintenance as well.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical features improve safety and cleanliness?\u003c\/h3\u003e\n\n\u003cp\u003eThe included silicone hose resists kinking and chemical degradation, while the integrated one-way valve prevents old fluid from flowing back into the system. An internal seal in each wrench reduces leaks while turning the bleeder screw, and the built-in socket keeps the tube attached during repositioning. Together these features reduce spills and exposure to brake fluid.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDurable silicone tubing resists fuel and brake fluid damage.\u003c\/li\u003e\n  \u003cli\u003eNon-return check valve maintains one-directional flow of fluid.\u003c\/li\u003e\n  \u003cli\u003eInternal seal prevents leakage at the screw interface.\u003c\/li\u003e\n  \u003cli\u003eBlow-molded case organizes components and protects them from dirt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the BILITOOLS Brake Bleeder Wrench Set correctly?\u003c\/h3\u003e\n\n\u003cp\u003eFirst identify the correct wrench size by matching the color-coded heads to the bleeder screw. Slip the sealed socket over the bleeder, attach the silicone tube, and open the screw while operating the brake pedal or using a vacuum\/pressure source per your vehicle’s instructions. Close the screw before releasing pressure to avoid air entering the hydraulic system.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSelect the matching wrench size and mount it over the bleeder screw.\u003c\/li\u003e\n  \u003cli\u003eAttach the silicone hose and ensure the check valve faces away from the vehicle.\u003c\/li\u003e\n  \u003cli\u003eOperate the brake or use a pump to expel fluid into a catch container.\u003c\/li\u003e\n  \u003cli\u003eClose the bleeder before releasing pressure and store tools in the case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: If you perform routine brake or clutch maintenance—whether as a DIY enthusiast, mobile technician, or shop mechanic—this BILITOOLS kit streamlines bleeding on a range of cars, trucks and motorcycles. It’s especially useful when wheel removal is impractical or when you want a cleaner, faster bleeding process without disposable hose changes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I bleed brakes without removing the wheel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The sealed socket design lets you attach the tube and open bleeder screws without removing wheels in many vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit prevent fluid from flowing back into the system?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The included silicone hose has a one-way check valve to stop backflow and contamination.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55168321913175,"sku":"B0CCS5LL7X","price":68.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-case-and-wrenches.jpg?v=1790399905"},{"product_id":"bilitools-16-piece-adjustable-pulley-holder-tool-set-step-pin-wrench-heat-treated-steel","title":"BILITOOLS 16-Piece Adjustable Pulley Holder Tool Set – Step-Pin Wrench, Heat-Treated Steel","description":"\u003cp\u003e\u003cstrong\u003eThe BILITOOLS 16PCS Pulley Holder Tool Set is an adjustable step-pin wrench kit designed to hold camshaft and crankshaft pulleys securely while you remove or install timing components.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact professional-grade kit bundles an adjustable two-piece holder, eight interchangeable locating step pins, and a molded storage case so mechanics can reliably lock pulleys in place during timing and removal jobs. Built from heat-treated steel with a wide adjustment range, the tool replaces multiple single-size holders and gives stable torque transfer for a variety of passenger cars, light trucks and motorcycles.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this pulley holder adapt to different pulley hole patterns?\u003c\/h3\u003e\n\u003cp\u003eThe set includes eight step pins in four overlapping diameter ranges so you can match common pulley hole sizes without improvising. Pins install quickly into the locator plate, letting the holder engage different pin patterns and depths.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour pin size groups: 6–10 mm, 8–11 mm, 10–12 mm, 11–16 mm\u003c\/li\u003e\n  \u003cli\u003eEight individual step pins for close fits across varying hole diameters\u003c\/li\u003e\n  \u003cli\u003eInterchangeable locating system for quick reconfiguration\u003c\/li\u003e\n  \u003cli\u003eWorks with staggered or evenly spaced bolt\/pin patterns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat build features make this tool strong and stable under torque?\u003c\/h3\u003e\n\u003cp\u003eBILITOOLS engineered the holder from heat-treated, high-hardness steel to resist bending and corrosion during repeated use. A precision threaded connection between the two main sections creates a rigid assembly with torque transmission close to that of a one-piece tool.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-hardness heat-treated steel construction resists flexing\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finish for longevity in garage environments\u003c\/li\u003e\n  \u003cli\u003eParallel jaw geometry holds pulleys flat and steady\u003c\/li\u003e\n  \u003cli\u003ePrecision threads lock sections tightly for higher torque stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich pulley sizes and vehicles will this adjustable wrench cover?\u003c\/h3\u003e\n\u003cp\u003eThe holder adjusts across a wide spread so it fits most camshaft, crankshaft and deep-groove pulleys used in everyday vehicles. From small motorcycle pulleys to larger light-truck components, the adjustment span accommodates varied diameters and depths.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustment range from approximately 1-1\/2\" to 8-5\/8\" (38 mm to 219 mm)\u003c\/li\u003e\n  \u003cli\u003eSuitable for passenger cars, light trucks and many motorcycles\u003c\/li\u003e\n  \u003cli\u003eWorks for engine timing tasks and pulley removal\/replacement\u003c\/li\u003e\n  \u003cli\u003eTwo-piece design adds reach while staying compact for storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and how is it stored?\u003c\/h3\u003e\n\u003cp\u003eThe kit is supplied in a blow-molded case to keep pins, plates and the holder organized and protected. The compact case makes the set easy to carry between jobs and helps prevent lost pieces in a busy shop environment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne adjustable pulley holder (two-piece) with extended handle\u003c\/li\u003e\n  \u003cli\u003eEight locating step pins covering four size groups\u003c\/li\u003e\n  \u003cli\u003eRugged blow-molded storage case for transport and organization\u003c\/li\u003e\n  \u003cli\u003eCompact footprint so the kit fits in toolboxes or on shelves\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS 16PCS Pulley Holder Tool Set is aimed at automotive technicians, DIY mechanics and motorcycle enthusiasts who need a versatile, durable holder for engine timing and pulley removal. It’s especially useful for garages that prefer a single adjustable tool to replace multiple fixed-size holders, and for anyone who values tool longevity, portability and a neatly organized kit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my crankshaft pulley?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Likely yes—its 1-1\/2\" to 8-5\/8\" adjustment and multiple step pins fit most crankshaft pulleys on cars, light trucks and many motorcycles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the pins durable for repeated shop use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the kit uses heat-treated, high-hardness steel pins and components designed to resist flexing and everyday corrosion.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55168433946967,"sku":"B0FP12S8DR","price":68.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-view.jpg?v=1790403863"},{"product_id":"bilitools-tie-rod-adjusting-tool-set-5-piece-1-2-drive-5-hex-sizes-for-steering-linkage-protection","title":"BILITOOLS Tie Rod Adjusting Tool Set 5-Piece 1\/2\" Drive — 5 Hex Sizes for Steering Linkage Protection","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS 5PCS Tie Rod Adjusting Tool Set is a five-size, 1\/2\"-drive kit made to adjust tie rod sleeves and steering linkage without crushing or marring components.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen servicing steering linkages on older trucks, SUVs, or off-road rigs, conventional pliers and pipe wrenches can damage delicate tie rod sleeves and slow alignment work. This BILITOOLS set gives technicians and DIY mechanics a safer, repeatable way to turn tie rod sleeves during front-end alignments. The five hex-ring sizes, 1\/2\" drive compatibility, and a 180° dual-hook layout let you work from the vehicle side with better access and less repositioning.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tool set prevent damage during alignment?\u003c\/h3\u003e\n\u003cp\u003eInstead of gripping soft or thin-walled tie rod sleeves with pliers or pipes, each BILITOOLS adapter fits around the sleeve to distribute turning force evenly. The design minimizes pinch points and reduces deformation, helping preserve the sleeve’s threads and sealing surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWrap-around hex sizing matches common sleeve dimensions for secure engagement.\u003c\/li\u003e\n  \u003cli\u003eMaterial and geometry prevent sharp contact that causes crushing.\u003c\/li\u003e\n  \u003cli\u003eDual-sided hook layout avoids constant re-clamping and reduces torque slip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and steering systems are these adjusting tools suited for?\u003c\/h3\u003e\n\u003cp\u003eThe set is aimed at older domestic trucks, SUVs and off-road vehicles that use conventional tie rod and steering linkage designs. While fitment depends on the specific sleeve diameter, the included sizes cover many classic applications on Ford F-Series, Chevy\/GMC, Ram, and Jeep Wrangler models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many conventional steering linkages and tie rod sleeves.\u003c\/li\u003e\n  \u003cli\u003eIdeal for domestic truck and Jeep steering repairs where OEM tools are no longer available.\u003c\/li\u003e\n  \u003cli\u003eNot intended as a universal fit for modern rack-and-pinion systems with different sleeve types.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and drive compatibility are included, and why they matter?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains five hex-style adapters in 3\/4\", 7\/8\", 1-1\/8\", 1-7\/16\", and 1-13\/16\" sizes to match a broad range of tie rod sleeves. Each tool accepts a 1\/2\" drive, so you can attach ratchets, breaker bars, torque wrenches, or compatible impact tools for controlled turning from the side of the vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFive popular sizes cover most domestic tie rod sleeve diameters encountered in older vehicles.\u003c\/li\u003e\n  \u003cli\u003e1\/2\" drive lets you use common garage tools for leverage and torque control.\u003c\/li\u003e\n  \u003cli\u003eHelps maintain alignment accuracy by allowing gradual, measured adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the dual-sided 180° hook design improve access?\u003c\/h3\u003e\n\u003cp\u003eThe opposed hook layout means you can engage the adapter from either side of the sleeve without flipping the tool around repeatedly. This reduces time under the vehicle and makes it easier to work in tight wheel wells or around suspension components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAccess both sides of the tie rod sleeve without re-seating the adapter.\u003c\/li\u003e\n  \u003cli\u003eWorks well in cramped engine bays and close to knuckles or control arms.\u003c\/li\u003e\n  \u003cli\u003eSimplifies bilateral adjustments during alignment checks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The BILITOOLS 5PCS Tie Rod Adjusting Tool Set is intended for professional mechanics, fleet technicians, and hands-on owners repairing or aligning steering linkages on older trucks, SUVs, and off-road vehicles. If you routinely service classic domestic steering systems and want a non-destructive, efficient alternative to pipe wrenches and pliers, this kit covers the most common sleeve sizes and fits standard 1\/2\" drive tools for straightforward shop or roadside use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this set fit modern rack-and-pinion tie rod ends?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This kit is designed for older conventional steering linkage sleeves; many rack-and-pinion tie rod designs differ and may not fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use impact tools with these adapters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the adapters accept 1\/2\" drive tools, including impact wrenches, but use controlled torque to avoid sudden forces.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55168478708055,"sku":"B0CXTCXKN6","price":72.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-packaging-and-contents.jpg?v=1790405056"},{"product_id":"bilitools-x3-belt-changing-tool-for-can-am-maverick-x3-red-cnc-aluminum-one-hand-tension-release","title":"BILITOOLS X3 Belt Changing Tool for Can‑Am Maverick X3 — Red CNC Aluminium, One‑hand Tension Release","description":"\u003cp\u003e\u003cstrong\u003eThe BILITOOLS X3 Belt Changing Tool is a compact, CNC-machined aluminum device that lets Can‑Am Maverick X3 owners release clutch tension and remove or fit drive belts quickly and without extra tools.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you own a Can‑Am Maverick X3 (including X3 Max, RS, DS, and Turbo R variants), routine belt changes and roadside repairs become simpler with the BILITOOLS X3. Built specifically to thread into the secondary clutch and provide controlled tension release, this tool reduces downtime and the need for bulky toolkits when you’re on the trail or in the garage.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the BILITOOLS X3 make belt replacement faster?\u003c\/h3\u003e\n\u003cp\u003eThe tool screws into the secondary clutch and uses a specially shaped washer and press handle to compress the clutch and release belt tension. That single-piece action eliminates the trial-and-error of improvised methods and cuts replacement time to minutes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick screw-in installation to the secondary clutch spindle\u003c\/li\u003e\n  \u003cli\u003eOne-hand press action to release belt tension\u003c\/li\u003e\n  \u003cli\u003eRemoves and installs belts without additional wrenches or pullers\u003c\/li\u003e\n  \u003cli\u003eBright color for fast retrieval during roadside fixes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this tool fit my Maverick X3 model and how precise is the fit?\u003c\/h3\u003e\n\u003cp\u003eBILITOOLS X3 is engineered for Can‑Am Maverick X3 families (X3, X3 Max, RS, DS, Turbo R). CNC machining ensures accurate thread geometry and dimensions that align with factory clutch components for reliable engagement without marring surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMade for the secondary clutch spindle used across X3 variants\u003c\/li\u003e\n  \u003cli\u003eCNC-machined for consistent, tight tolerances\u003c\/li\u003e\n  \u003cli\u003eRoller and washer protect clutch faces during threading\u003c\/li\u003e\n  \u003cli\u003eLow-profile design clears surrounding components for easy access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and features protect the clutch and improve handling?\u003c\/h3\u003e\n\u003cp\u003eThe tool is constructed from high-strength, corrosion-resistant aluminum alloy so it resists rust while staying lightweight. An ergonomic, textured handle and a 360° smooth roller make installation smoother and reduce accidental slips or component damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium aluminum resists corrosion and repeated use\u003c\/li\u003e\n  \u003cli\u003eTextured non-slip handle improves grip under wet or dirty conditions\u003c\/li\u003e\n  \u003cli\u003e360° roller guides the tool into the clutch without scraping\u003c\/li\u003e\n  \u003cli\u003eBuilt-in hanging hole for tidy storage and quick access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow portable is it for trail repairs and where should I store it?\u003c\/h3\u003e\n\u003cp\u003eCompact and lightweight, the BILITOOLS X3 fits easily into a small tool pouch, glove box, or UTV storage compartment. The vivid red finish helps you spot it quickly, and the hanging hole allows secure mounting inside a garage or toolkit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmall footprint for UTV tool kits and backpacks\u003c\/li\u003e\n  \u003cli\u003eBright finish minimizes lost-tool searches on the trail\u003c\/li\u003e\n  \u003cli\u003eHanging hole for pegboard or carabiner storage\u003c\/li\u003e\n  \u003cli\u003eDurable finish stands up to mud, grease, and outdoor exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS X3 is aimed at Can‑Am Maverick X3 owners, mechanics, and off‑road enthusiasts who prefer fast, reliable belt service with minimal gear. It’s especially useful for riders who do their own maintenance, trail riders who need an emergency belt tool, and professional shops that want a lightweight, repeatable method for clutch work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this tool fit all Can‑Am Maverick X3 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s designed for Maverick X3, X3 Max, RS, DS, and Turbo R secondary clutches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need extra tools to change a belt with this device?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The BILITOOLS X3 releases tension and allows belt removal or installation without additional tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55168499548503,"sku":"B0FNWSXZ3J","price":50.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-x3-front-view-tool.jpg?v=1790405747"},{"product_id":"bilitools-motorcycle-shock-spring-compressor-set-pair-for-rear-coil-light-atv-17mm-drive-forged-steel","title":"BILITOOLS Motorcycle Shock Spring Compressor Set — Pair for Rear Coil \u0026 Light ATV, 17mm Drive, Forged Steel","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS Motorcycle Shock Spring Compressor Set is a two-piece kit that safely compresses rear coil springs on motorcycles and light ATVs to allow controlled removal and installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re replacing rear shocks, servicing spring preload, or swapping springs for a different ride height, this pair of compressors provides balanced, stable compression so you can work with confidence in a home garage or professional shop. The kit uses 17 mm wrench\/socket drive, heavy-duty forged components, and protective pads to minimize damage to springs while keeping each operation even and secure.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tool make removing motorcycle rear springs safer?\u003c\/h3\u003e\n\u003cp\u003eThe paired compressors clamp opposite sides of a shock spring so tension decreases evenly, reducing the chance of sudden release or spring distortion. Robust hooks and forged bolts maintain hold under load while protective pads prevent paint and coil marring.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo compressors used together for balanced compression.\u003c\/li\u003e\n\u003cli\u003eForged 40Cr steel bolts resist bending under tension.\u003c\/li\u003e\n\u003cli\u003eCast 42CrMo hooks provide secure engagement with coils.\u003c\/li\u003e\n\u003cli\u003eSeven spring protectors cushion the coil to prevent scratches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my motorcycle or light ATV shocks?\u003c\/h3\u003e\n\u003cp\u003eThese compressors are made to suit most classic and modern motorcycle rear coil springs and many light ATV suspensions but are not for automotive strut springs or heavy UTV\/truck suspension. They work well across a wide range of bikes with exposed rear shocks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for motorcycle rear coil springs and light ATV shocks.\u003c\/li\u003e\n\u003cli\u003eNot intended for car strut springs or heavy off-road vehicle springs.\u003c\/li\u003e\n\u003cli\u003eAdjustable hook spacing fits common coil diameters on bikes.\u003c\/li\u003e\n\u003cli\u003eCompact profile for use in tighter garage spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I operate the compressors with my existing tools?\u003c\/h3\u003e\n\u003cp\u003eEach compressor accepts a 17 mm wrench or 17 mm socket so you can use hand tools you likely already own. Turn both compressors incrementally and alternate sides for steady, even compression until the spring is safely loose on the shock assembly.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse a 17 mm wrench or 17 mm socket for drive.\u003c\/li\u003e\n\u003cli\u003eCompress a little on one side, then on the opposite side, repeat.\u003c\/li\u003e\n\u003cli\u003eLock the spring protectors into place before loading the spring.\u003c\/li\u003e\n\u003cli\u003eNever compress only one side — use the pair for balanced handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and protective features ensure long-term use?\u003c\/h3\u003e\n\u003cp\u003eThe kit combines forged and machined steel components to withstand repeated use, while included protectors guard finishes during service. Durable construction reduces risk of deformation and keeps the tools reliable through multiple maintenance cycles.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eForged 40Cr steel bolts for strength under load.\u003c\/li\u003e\n\u003cli\u003eCast 42CrMo hooks for secure coil engagement.\u003c\/li\u003e\n\u003cli\u003eMachined carbon steel bodies for durability and precision.\u003c\/li\u003e\n\u003cli\u003eSeven protective pads to prevent scratches and paint damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you regularly service motorcycles or light ATVs—whether you’re a DIY enthusiast, a weekend wrench, or a small repair shop—the BILITOOLS Motorcycle Shock Spring Compressor Set is built to speed up rear-shock jobs and reduce risk when removing or installing coil springs. Avoid using it on automotive struts or heavy utility vehicles; instead, choose it when you need compact, strong, and protective compressors that fit common bike shocks and operate with a 17 mm wrench or socket.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these on car strut springs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This set is for motorcycle and light ATV coil springs only, not automotive struts or heavy suspension.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What drive size do the compressors accept?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each compressor accepts a 17 mm wrench or 17 mm socket for fast, controlled compression.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55168522289495,"sku":"B0GK93JLJ6","price":70.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-packaging-and-tools.jpg?v=1790406555"},{"product_id":"bilitools-engine-timing-tool-kit-for-1-0-1-2-1-4l-gm-petrol-engines-oem-equivalent-locking-set-with-case","title":"BILITOOLS Engine Timing Tool Kit for 1.0\/1.2\/1.4L GM Petrol Engines — OEM-Equivalent Locking Set with Case","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS Turbo Engine Timing Tool Kit is a complete OEM-equivalent locking and setting set designed to accurately time 1.0L, 1.2L and 1.4L Chevrolet and Vauxhall\/Opel engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty kit gathers the specific alignment pins, camshaft locking plate, sensor disc tool and tensioner pins mechanics need when servicing timing chains and belt-driven components on popular small-displacement GM engines. Every piece fits the most common engine codes from A10XEP to A14NET and ships in a blow-molded case so tools stay organized and ready for workshop or roadside use.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engine codes will this kit work with?\u003c\/h3\u003e\n\u003cp\u003eThe set covers a broad range of Chevrolet and Vauxhall\/Opel models built with GM small-capacity petrol engines. It targets model years roughly between 2009 and 2020 across multiple platforms and includes the engine codes technicians request most often for correct timing procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet: Aveo (2011–2015), Cruze (2012–2015), Orlando (2012–2015), Trax (2013–2015), Volt (2012–2014).\u003c\/li\u003e\n  \u003cli\u003eVauxhall\/Opel: Adam, Astra J, Cascada, Corsa D\/E, Insignia A, Mokka, Meriva B, Zafira-C Tourer (2009–2020).\u003c\/li\u003e\n  \u003cli\u003eSupported engine families: 1.0L (A10XEP), 1.2L (A12XEL, A12XER, LDC\/B12XEL, LWD\/B12XEL, L2Q\/A12XEL), 1.4L (A14XEL, A14XER, LDD\/A14XER, LUJ\/A14NET, LUH\/A14NEL, LDD\/B14XER, LUJ\/B14NEH).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and how do they match OEM tools?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies the locking and alignment tools technicians need to reproduce OEM timing positions without improvisation. Each component corresponds to common OEM numbers for these engines so you can follow manufacturer service procedures with confidence.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCamshaft locking plate and inlet camshaft adjuster tool for stable cam timing.\u003c\/li\u003e\n  \u003cli\u003eCamshaft sensor disc setting tool for precise sensor alignment.\u003c\/li\u003e\n  \u003cli\u003eChain tensioner pin (4 mm) and belt tensioner pin (2.5 mm) for secure tensioner engagement.\u003c\/li\u003e\n  \u003cli\u003eCrankshaft locking pin and other pins matching OEM references EN-49977-100, KM-953-A, EN-49977-200, EN-49978, KM-955-1, KM-955-2, KM-952.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and portable is the kit for everyday shop use?\u003c\/h3\u003e\n\u003cp\u003eComponents are machined to withstand repetitive workshop use and organized in a robust blow-molded case that protects tools from knocks, grease and loss. The case keeps pieces sorted for quicker job turnaround and simple inventory checks between jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHardened alignment pins and metal locking plate built for repeated installation\/removal.\u003c\/li\u003e\n  \u003cli\u003eCompact, molded case with custom slots for each tool.\u003c\/li\u003e\n  \u003cli\u003eLightweight enough for mobile technicians, strong enough for garage racks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should you choose this tool set over generic alternatives?\u003c\/h3\u003e\n\u003cp\u003ePick this kit when you need precise OEM-equivalent positioning for these GM engines instead of adapting universal tools. It saves time by fitting the specific timing points and sensor discs used on the listed vehicles, reducing trial-and-error and the risk of incorrect timing during rebuilds or tensioner replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWhen replacing timing chains, tensioners or camshaft sprockets on supported engines.\u003c\/li\u003e\n  \u003cli\u003eDuring engine removal\/installation where timing must be maintained or reset.\u003c\/li\u003e\n  \u003cli\u003eFor faster, repeatable alignment on fleet or frequent-repair vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS Turbo Engine Timing Tool Kit is intended for professional mechanics, independent garages, and experienced DIYers who service Chevrolet and Vauxhall\/Opel 1.0L–1.4L engines. If you perform timing repairs, tensioner servicing, or sensor realignment on the listed models and engine codes, this kit supplies the dedicated locking tools and organized carrying case to complete jobs accurately and efficiently.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit the 1.2L A12XEL engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit supports 1.2L engine codes including A12XEL and related variants for Opel\/Vauxhall and Chevrolet models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the tools stored in a case suitable for mobile technicians?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The set ships in a durable blow-molded case designed for workshop and mobile use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55168525959511,"sku":"B0CXTB9R46","price":64.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-kit-open-front-view.jpg?v=1790406779"},{"product_id":"bilitools-axle-nut-socket-set-8-piece-1-2-drive-deep-12-point-hex-impact-sockets","title":"BILITOOLS Axle Nut Socket Set, 8-Piece 1\/2\" Drive — Deep 12-Point \u0026 Hex Impact Sockets","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS 8-Piece Axle Nut Socket Set is a heavy-duty 1\/2\" drive toolkit with five deep 12-point axle sockets and three hex bit sockets for common axle, hub and CV-joint service.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit was built to tackle stubborn axle nuts and internal-hex axle bolts on a range of passenger vehicles. Each component is forged from heat-treated chromium-molybdenum steel and stored in a fitted case, so the tools resist impact stress while staying organized between jobs. The set covers common sizes found on many domestic and import cars, helping you reach nuts on protruding axles and access recessed hex bolts without improvisation.\u003c\/p\u003e\n\n\u003ch3\u003eWhich fasteners will this set tackle?\u003c\/h3\u003e\n\u003cp\u003eThe set includes deep 12-point sockets sized 30, 32, 34, 35 and 36 mm for external axle and spindle nuts, plus 14, 17 and 19 mm hex bit sockets for internal-hex axle bolts. The 12-point profile aligns quickly with matching nuts, while the deep length clears threaded shafts and hub assemblies.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFive deep 12-point sockets: 30, 32, 34, 35, 36 mm (3.1\" length)\u003c\/li\u003e\n  \u003cli\u003eThree hex bit sockets: 14, 17, 19 mm for internal-hex bolts\u003c\/li\u003e\n  \u003cli\u003eDesigned for 1\/2\" drive impact wrenches and breaker bars\u003c\/li\u003e\n  \u003cli\u003eFits many common axle, hub and CV-joint fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow rugged and reliable are these sockets for impact use?\u003c\/h3\u003e\n\u003cp\u003eEach piece is forged from chromium-molybdenum (Cr-Mo) steel and heat-treated to withstand repeated high-torque impacts. The material choice and manufacturing process reduce rounding and premature wear when used with impact tools, making the set suitable for professional garage tasks and heavy DIY repair.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCr-Mo steel construction for high strength and toughness\u003c\/li\u003e\n  \u003cli\u003eHeat-treated and tempered to resist fatigue under torque\u003c\/li\u003e\n  \u003cli\u003eEngineered for impact-rated 1\/2\" drive tools\u003c\/li\u003e\n  \u003cli\u003eDurable finish for corrosion resistance and long life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this set fit my vehicle model?\u003c\/h3\u003e\n\u003cp\u003eThe sockets are compatible with a wide range of makes, including many Toyota, Honda, Chrysler, Mercedes, BMW, VW, GM, Audi and Jeep models, but axle and bolt profiles vary by year and trim. Always verify the fastener diameter and whether it’s a 12-point external nut or an internal-hex bolt before starting work. The kit covers common sizes but may not suit every application.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for select import and domestic vehicles listed above\u003c\/li\u003e\n  \u003cli\u003eCheck nut\/bot profile and size before use to ensure fit\u003c\/li\u003e\n  \u003cli\u003eUseful for CV axle, wheel hub, spindle and suspension tasks\u003c\/li\u003e\n  \u003cli\u003eNot a universal replacement for nonstandard or factory-unique fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the storage case help during repairs?\u003c\/h3\u003e\n\u003cp\u003eThe molded case keeps each socket and bit in its own place so you can grab the right size quickly and return components to their slots after use. Clear size markings reduce downtime searching for the correct socket and help prevent lost pieces on the jobsite or in the garage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitted slots for all five deep sockets and three hex bits\u003c\/li\u003e\n  \u003cli\u003eSize markings make identification fast and reliable\u003c\/li\u003e\n  \u003cli\u003eCompact footprint for easy storage in tool cabinets or trunks\u003c\/li\u003e\n  \u003cli\u003eProtects tools from moisture and impacts between uses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this set is for: technicians and DIYers who work on axle, hub and CV-joint service and need impact-rated, deep-reach sockets for stubborn 12-point axle nuts and internal-hex axle bolts. It’s a practical add-on for professional garages, mobile mechanics and weekend enthusiasts who service common Toyota, Honda, Chrysler, Mercedes, BMW, VW, GM, Audi and Jeep vehicles. If you regularly remove axle nuts or service wheel hubs and want a compact, durable toolkit that fits a range of common sizes, this BILITOOLS set provides the specialized sockets and organized storage to speed the job and reduce tool wear.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these sockets safe for impact wrenches?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are forged from chromium-molybdenum steel and heat-treated for 1\/2\" drive impact tool use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the sockets fit all vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many Toyota, Honda, Chrysler, Mercedes, BMW, VW, GM, Audi and Jeep models, but confirm fastener size and profile first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55168539459927,"sku":"B09WRCS5BD","price":79.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-axle-socket-set-case-front.jpg?v=1790407452"},{"product_id":"bilitools-pulley-holder-tool-set-15pcs-adjustable-pin-wrench-1-2-drive-32-127mm-span-7-pin-sizes","title":"BILITOOLS Pulley Holder Tool Set — 15PCS Adjustable Pin Wrench, 1\/2\" Drive, 32–127mm Span, 7 Pin Sizes","description":"\u003cp\u003e\u003cstrong\u003eThe BILITOOLS 15PCS Pulley Holder Tool Set is an adjustable pin-wrench kit with a 1\/2\" drive that holds camshaft and crankshaft pulleys firmly so you can remove or install them with added reach and torque.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis purpose-built pulley holder combines an adjustable spanner arm, seven pinned inserts, a long wrench compatible with a 1\/2\" drive ratchet or breaker bar, and a compact storage case. Designed to work across many cars and motorcycles, the set gives you the pin configurations and leverage needed to lock pulley faces while you loosen or tighten fasteners, reducing slippage and protecting timing components during maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eWhich pulley sizes and pin diameters does this set fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes variable pins sized 3.5mm, 4mm, 4.5mm, 5mm, 6mm, 7mm and 10mm to cover a broad range of camshaft and crankshaft pulley holes. The adjustable wrench arm expands from 32mm (1 1\/4\") to 127mm (5\"), letting you adapt to compact and larger pulleys without needing extra tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePin sizes: 3.5, 4, 4.5, 5, 6, 7, 10 mm for common pulley hole patterns.\u003c\/li\u003e\n  \u003cli\u003eAdjustable span: 32–127 mm for small to medium pulleys.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: works on many cars and motorcycles with standard pin-hole pulleys.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the wrench give extra torque and reach?\u003c\/h3\u003e\n\u003cp\u003eThe included 12\" long adjustable wrench body accepts a 1\/2\" drive ratchet or breaker bar, which increases leverage so you can apply higher torque to stuck fasteners with less effort. The wrench swivels to set the correct angle, and replacement adjusting nuts maintain secure pin engagement during heavy-duty jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-inch wrench accepts 1\/2\" drive for added leverage.\u003c\/li\u003e\n  \u003cli\u003eSwiveling jaw adjusts angles for tight engine bays.\u003c\/li\u003e\n  \u003cli\u003eTwo replacement adjusting nuts included for durable use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories and replacements come in the kit?\u003c\/h3\u003e\n\u003cp\u003eThe set ships with seven pinned inserts, two small installation wrenches for the pins, two spare adjusting nuts, and a molded storage case. These extras let you swap pins quickly, keep everything organized, and replace wear parts without delay.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo small wrenches to install or remove pins easily.\u003c\/li\u003e\n  \u003cli\u003eTwo spare adjusting nuts for later maintenance or heavy use.\u003c\/li\u003e\n  \u003cli\u003eMolded storage case keeps components protected and organized.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use this tool safely on an engine pulley?\u003c\/h3\u003e\n\u003cp\u003ePosition the correct pin pair to match the pulley hole pattern, tighten the adjustable arm so pins seat fully, then attach the 1\/2\" drive ratchet or breaker bar to the wrench. Apply steady force; avoid sudden jerks and always confirm timing marks and belt position before loosening engine pulleys.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelect pin diameter and match pulley hole spacing precisely.\u003c\/li\u003e\n  \u003cli\u003eTighten adjusting nut securely before applying torque.\u003c\/li\u003e\n  \u003cli\u003eUse steady, controlled force and re-check timing components after work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS 15PCS Pulley Holder Tool Set is made for professional mechanics, DIY enthusiasts and garage technicians who perform timing belt, camshaft, or crankshaft pulley work. If you service a variety of cars or motorcycles and need a compact, adaptable tool to hold pulleys securely while using a 1\/2\" drive ratchet or breaker bar, this kit provides the pin options, leverage and replaceable parts to make the job faster, safer and more repeatable.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this set fit my car's crankshaft pulley?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits most crankshaft pulleys with pin-hole patterns using included pins (3.5–10 mm) and an adjustable span of 32–127 mm. Check your pulley hole size before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use a breaker bar with the wrench?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The wrench accepts a 1\/2\" drive ratchet or breaker bar for extra reach and torque on stubborn pulleys.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55168541950295,"sku":"B0D69CMGCF","price":67.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-pulley-holder-kit-front-packaging.jpg?v=1790407563"},{"product_id":"bilitools-magnetic-swivel-spark-plug-socket-set-7-piece-3-8-drive-chrome-vanadium-molded-case","title":"BILITOOLS magnetic swivel spark plug socket set 7-piece, 3\/8\" drive — Chrome-Vanadium, molded case","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS 7-piece magnetic swivel spark plug socket set with gap tool is a compact, corrosion-resistant kit designed to remove, install, and accurately gap spark plugs in tight engine bays.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit combines four common spark plug socket sizes, a versatile gap gauge, and swivel magnetic sockets on a 3\/8\" drive to make spark plug service faster and neater. Built from Chrome-Vanadium steel with a mirror chrome finish and organized in a molded case, the set is intended for DIY mechanics, mobile technicians, and home garages who need reliable access to plugs in cramped engine compartments.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly is included and why does each part matter?\u003c\/h3\u003e\n\u003cp\u003eThe set contains 9\/16\", 5\/8\", 14mm, and 16mm spark plug sockets plus a dedicated gap tool for SAE and metric measurements. Each socket has a magnetic core and a swivel design to hold plugs securely and reach awkward angles without dropping or cross-threading.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour common socket sizes cover most passenger vehicles and small engines.\u003c\/li\u003e\n  \u003cli\u003eMagnetic inserts prevent dropped plugs during installation or removal.\u003c\/li\u003e\n  \u003cli\u003e360° swivel feature allows better access in confined spaces.\u003c\/li\u003e\n  \u003cli\u003eGap tool supplies SAE and metric feeler sizes for accurate adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the magnetic swivel design improve spark plug work?\u003c\/h3\u003e\n\u003cp\u003eThe strong magnetic cores capture the spark plug so you can lift it out of deep wells without losing it. The 360° swivel head aligns the socket with the engine’s orientation, helping you apply torque evenly and avoid stripping the plug.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMagnetic retention reduces dropped plug damage and frustration.\u003c\/li\u003e\n  \u003cli\u003eSwivel joint reaches angled or recessed spark plug locations.\u003c\/li\u003e\n  \u003cli\u003e6- and 12-point profiles provide secure grip on various plug hex sizes.\u003c\/li\u003e\n  \u003cli\u003eChrome-Vanadium construction resists deformation under torque.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow precise is the included spark plug gap tool?\u003c\/h3\u003e\n\u003cp\u003eThe compact gap gauge lists SAE and metric increments so you can measure and set plug gaps accurately before installation. It covers common specifications used by many manufacturers and helps maintain consistent ignition performance when used per vehicle guidelines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSAE sizes: .25, .30, .35, .40, .44, .45, .50, .55, .60 inches.\u003c\/li\u003e\n  \u003cli\u003eMetric sizes: 0.64, 0.76, 0.89, 1.02, 1.12, 1.14, 1.27, 1.40, 1.52 mm.\u003c\/li\u003e\n  \u003cli\u003eThin profile fits between electrode gaps for exact measurement.\u003c\/li\u003e\n  \u003cli\u003eDurable metal construction for repeatable use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and transportable is this kit for mobile or shop use?\u003c\/h3\u003e\n\u003cp\u003eSockets are forged from Chrome-Vanadium steel and finished with mirror chrome for corrosion resistance and easy cleaning. The molded storage case keeps each piece secured, labeled, and ready to carry to a job site or tuck into a home toolbox.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChrome-Vanadium alloy resists wear and bending under normal torque.\u003c\/li\u003e\n  \u003cli\u003eMirror chrome plating reduces rust and simplifies cleanup.\u003c\/li\u003e\n  \u003cli\u003eEngraved size markings speed up socket selection.\u003c\/li\u003e\n  \u003cli\u003eCompact case protects components and organizes storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS 7-piece magnetic swivel spark plug socket set is ideal for DIY car owners, motorcycle and small-engine enthusiasts, and professional mechanics who need a compact, reliable kit for routine spark plug servicing. It suits anyone working in restricted engine spaces who wants magnetic retention, a 360° swivel for reach, and a gap tool to check specifications before installing plugs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these sockets fit my 3\/8\" drive ratchet?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit is built for a 3\/8\" drive and pairs with standard 3\/8\" ratchets and extensions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the gap tool include metric sizes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the gap tool includes both SAE and metric increments for common spark plug specs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55168576815447,"sku":"B0C2C4W6ML","price":70.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-packaging-socket-set.jpg?v=1790408881"},{"product_id":"bilitools-helicoil-thread-repair-kit-metric-m5-m12-stainless-inserts-hss-tools-case","title":"BILITOOLS Helicoil Thread Repair Kit Metric M5–M12 — Stainless Inserts \u0026 HSS Tools, Case","description":"\u003cstrong\u003eBILITOOLS Helicoil Thread Repair Kit Metric is a complete M5–M12 stainless-steel insert system that restores stripped internal threads and creates stronger, longer-lasting fastener points.\u003c\/strong\u003e\n\n\u003cp\u003eIf a bolt hole in an engine mount, gearbox housing, or plumbing fitting has been damaged, this kit supplies the drills, taps, installation tools and stainless inserts needed to rebuild the thread to factory or stronger specification. The set combines hardened twist drills with taps and 304 stainless helicoil-style inserts sized for the most common metric fasteners, packaged in a molded carrying case so you can tackle repairs on the bench or at the job site.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use this kit to repair a stripped thread?\u003c\/h3\u003e\n\u003cp\u003eRepairing a thread is a three-step process: drill to the specified oversized pilot, cut the new female thread using the matched tap, then insert the coiled stainless insert so it locks into the fresh thread. The kit includes break-off tang tools to seat and remove the tang once the insert is installed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrill with the supplied 4241 HSS twist drill sized for each insert.\u003c\/li\u003e\n  \u003cli\u003eTap the hole using the matching 4241 HSS tap included.\u003c\/li\u003e\n  \u003cli\u003eUse the break pin tool to wind the 304 stainless insert into place, then break off the tang.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fastener sizes and quantities are included?\u003c\/h3\u003e\n\u003cp\u003eThe kit covers the most frequently used metric sizes from M5 through M12, with higher quantities of smaller sizes for common repairs. Inserts are stainless steel for corrosion resistance and higher torque capacity than many base materials.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eM5 x 0.8: 25 inserts\u003c\/li\u003e\n  \u003cli\u003eM6 x 1.0: 25 inserts\u003c\/li\u003e\n  \u003cli\u003eM8 x 1.25: 25 inserts\u003c\/li\u003e\n  \u003cli\u003eM10 x 1.5: 25 inserts\u003c\/li\u003e\n  \u003cli\u003eM12 x 1.75: 10 inserts\u003c\/li\u003e\n  \u003cli\u003eIncludes 5 matching HSS drills, 5 HSS taps and 5 break-pin tools for the set of sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and applications is the kit suitable for?\u003c\/h3\u003e\n\u003cp\u003eThese stainless inserts and HSS cutting tools work in a broad range of substrates: ferrous and non-ferrous metals, composites and many polymers. That versatility makes the kit useful for automotive, motorcycle, marine, construction and household plumbing repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e304 stainless inserts resist corrosion where exposure to moisture or salty air is expected.\u003c\/li\u003e\n  \u003cli\u003eHSS 4241 drills and taps provide strong cutting performance through metals and composites.\u003c\/li\u003e\n  \u003cli\u003eIdeal for engine components, transmission housings, motor mounts, valve bodies and threaded fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the case and tooling offer for workshop efficiency?\u003c\/h3\u003e\n\u003cp\u003eAll components are arranged in a blow-molded case so you can quickly identify the correct drill, tap and insert size. Organized tooling reduces downtime and protects small parts during transport or storage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClearly labeled cavities for drills, taps, inserts and break-pin tools.\u003c\/li\u003e\n  \u003cli\u003eCompact case fits on a bench, in a van, or in a toolbox drawer.\u003c\/li\u003e\n  \u003cli\u003eDurable molded plastic protects HSS tools and stainless inserts from damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The BILITOOLS Helicoil Thread Repair Kit Metric is designed for professional mechanics, maintenance technicians, DIY enthusiasts and tradespeople who need a reliable, repeatable way to restore stripped or undersized internal threads. If you repair engines, gearboxes, plumbing fixtures, brackets or any component that relies on threaded fasteners, this kit supplies the matched drill, tap, install tool and corrosion-resistant inserts to complete the job quickly and correctly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these inserts be used in aluminum?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 304 stainless inserts and HSS taps are suitable for aluminum and other softer metals to provide stronger threads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools beyond what's included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required; the kit includes the drills, taps and break-pin tools. A tap wrench and drill driver are recommended but commonly available.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55168605323607,"sku":"B0C5DBVSHZ","price":72.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-thread-repair-kit-front-view.jpg?v=1790409919"},{"product_id":"bilitools-helicoil-thread-repair-kit-sae-imperial-1-4-1-2-304-stainless-inserts-hss-tap-set","title":"BILITOOLS Helicoil Thread Repair Kit SAE — Imperial 1\/4-1\/2, 304 Stainless Inserts \u0026 HSS Tap Set","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS Helicoil Thread Repair Kit SAE is a complete set for restoring stripped or damaged imperial threads and installing durable 304 stainless inserts from 1\/4\"-20 up to 1\/2\"-13.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you service cars, maintain plumbing, or work on metal assemblies, this kit gathers all the essentials—HSS drills, HSS taps, installation tools and a large supply of wire thread inserts—neatly packed in a molded case for jobsite portability. The kit’s 304 stainless inserts are corrosion resistant and designed to strengthen weak base metals, while 135° apex HSS drills improve drilling speed and penetration. It’s built to be a practical, all-in-one solution when threads need reliable restoration on imperial (SAE) fasteners.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit repair stripped internal threads?\u003c\/h3\u003e\n\u003cp\u003eThe process replaces worn or damaged female threads with a stainless steel coil insert that restores the original thread size and profile. You drill the hole to the correct size, tap it to the insert’s coil profile, and wind the insert into place with the supplied installation tool. A break-off tang ensures the internal bore is clear for the mating bolt once removed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrill: choose the matching HSS drill bit for clean, accurate hole sizing.\u003c\/li\u003e\n  \u003cli\u003eTap: use the HSS tap to form the new mating surface for the coil insert.\u003c\/li\u003e\n  \u003cli\u003eInstall: wind the stainless insert into the prepared hole using the break pin tool.\u003c\/li\u003e\n  \u003cli\u003eFinish: snap off the tang to clear the thread path for bolts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and quantities are included in the set?\u003c\/h3\u003e\n\u003cp\u003eThis SAE kit covers common imperial thread sizes used in automotive and machinery work. It includes multiple drills, taps, and insertion tools plus an ample stock of inserts so you can tackle several repairs without restocking. Quantities are sized to reflect typical repair frequency for smaller through-medium fasteners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInserts: 25 each of 1\/4\"-20, 5\/16\"-18, 3\/8\"-16 and 7\/16\"-14; 10 each of 1\/2\"-13.\u003c\/li\u003e\n  \u003cli\u003eTools: 5 HSS drill bits, 5 HSS taps and 5 break pin installation tools.\u003c\/li\u003e\n  \u003cli\u003eCase: blow-molded plastic organizer for tidy storage and transport.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich materials and jobs is the kit suited for?\u003c\/h3\u003e\n\u003cp\u003eThe coil inserts and HSS tooling are compatible with a broad range of base materials including metals, composites and many engineering plastics. The kit is particularly useful where original threads have stripped in softer alloys or where a longer-wearing threaded insert is needed to tolerate higher torque. It’s suitable for engine components, valve bodies, brackets and other threaded assemblies.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBase materials: steel, aluminum, cast iron, composites and polymers.\u003c\/li\u003e\n  \u003cli\u003eTypical uses: automotive repairs, plumbing fittings, industrial maintenance.\u003c\/li\u003e\n  \u003cli\u003ePerformance: 304 stainless inserts improve corrosion resistance and thread life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the kit make on-site work easier?\u003c\/h3\u003e\n\u003cp\u003eAll components are arranged in a blow-molded case so you can carry a ready-to-use repair station to the worksite and keep parts organized between jobs. The HSS drill geometry (135° apex) is optimized for faster penetration and cleaner holes, reducing rework. Supplied installation tools and break pins speed the insert placement and finishing steps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePortable case keeps drills, taps, inserts and tools accessible.\u003c\/li\u003e\n  \u003cli\u003e135° HSS drills for efficient cutting and reduced walking.\u003c\/li\u003e\n  \u003cli\u003ePre-sized insert counts minimize trips to replenish supplies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS Helicoil Thread Repair Kit SAE is aimed at mechanics, maintenance technicians, fabrication shops and serious DIYers who frequently encounter stripped imperial threads and need a durable, on-hand repair solution. If you work with automotive or plumbing fittings, restore threaded parts in softer metals, or maintain equipment with imperial fasteners, this kit supplies the drills, taps, inserts and tools to perform professional-grade thread restorations on-site.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit repair both aluminum and steel thread holes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 304 stainless inserts and HSS tools work on aluminum, steel, cast iron and many plastics.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need extra tools to use the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The kit includes drills, taps, break pin installation tools and enough inserts for multiple repairs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55168651821399,"sku":"B0C5D8S6HT","price":78.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-packaging_e9e34447-1d36-41e1-85ea-e7d10cb8e914.jpg?v=1790410786"},{"product_id":"bilitools-8-2-jaw-gear-puller-8-inch-cr-v-bearing-pulley-removal-with-reversible-jaws","title":"BILITOOLS 8\" 2-Jaw Gear Puller — 8-inch CR-V Bearing \u0026 Pulley Removal with Reversible Jaws","description":"\u003cp\u003e\u003cstrong\u003eThe BILITOOLS 8\" 2-Jaw Gear Puller is a heat-treated CR-V steel removal tool designed to safely extract bearings, pulleys, gears and flywheels with reversible jaws for internal or external pulls.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered for workshops and home mechanics, this 8\" two-jaw puller balances strength and versatility so you can remove pressed-on components without marring parts. Its reversible jaw design lets you switch between internal and external pulling, and the heat-treated chromium-vanadium construction resists bending under load. This model is one size in a six-size lineup, giving you options for different diameters and applications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this puller handle both internal and external extractions?\u003c\/h3\u003e\n\n\u003cp\u003eThe BILITOOLS 2-jaw puller features reversible arms that reorient to grasp either the inside or outside edge of a component. That simple conversion makes it useful for hub-style bearings, sleeves, and pulleys alike, without needing a separate tool for each job.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReversible jaw configuration for internal or external gripping\u003c\/li\u003e\n  \u003cli\u003eAdjustable jaw spread to fit a range of diameters\u003c\/li\u003e\n  \u003cli\u003eCentral threaded forcing screw provides steady, centered force\u003c\/li\u003e\n  \u003cli\u003eSuitable for confined spaces where larger pullers won't fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction ensure durability under load?\u003c\/h3\u003e\n\n\u003cp\u003eThis puller is forged from heat-treated chromium-vanadium (CR-V) steel to withstand repeated use and resist deformation. The robust finish reduces surface wear while the hardened screw reduces the risk of stripping during high-torque pulls.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHeat-treated CR-V steel body for strength and longevity\u003c\/li\u003e\n  \u003cli\u003eHardened central screw for reliable force transmission\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finish for workshop environments\u003c\/li\u003e\n  \u003cli\u003eRugged joints and secure mounting points to prevent slippage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to set up and operate for DIY and professional users?\u003c\/h3\u003e\n\n\u003cp\u003eSetup is straightforward: position the jaws, align the forcing screw on the shaft, and turn the screw to apply steady pressure. Its simple mechanics and quick adjustment features make it accessible to hobbyists while providing the durability professionals need for frequent use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eQuick jaw adjustment for faster setup\u003c\/li\u003e\n  \u003cli\u003eCentring tip keeps pressure aligned to avoid damage\u003c\/li\u003e\n  \u003cli\u003eNo special adapters required for most standard bearings and pulleys\u003c\/li\u003e\n  \u003cli\u003eCompact footprint for use on motorcycles, bicycles, and small machinery\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes are available and how do I choose the right one?\u003c\/h3\u003e\n\n\u003cp\u003eBILITOOLS offers this 2-jaw puller in six sizes—3\", 4\", 6\", 8\", 10\", and 12\"—so you can select a model that matches the diameter and clearance of the part you need to remove. Choose a size that allows the jaws to securely engage the component without overextending the arms.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e3\" and 4\" for small bearings and bicycle parts\u003c\/li\u003e\n  \u003cli\u003e6\" and 8\" for most automotive and motorcycle pulleys\u003c\/li\u003e\n  \u003cli\u003e10\" and 12\" for larger flywheels and heavy machinery parts\u003c\/li\u003e\n  \u003cli\u003eSelect a size that keeps the jaws well within their effective span\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this puller is for: this BILITOOLS 8\" 2-jaw gear puller suits mechanics, restorers, and DIYers who need a compact yet strong removal tool for bearings and pulleys. If you work on cars, motorcycles, bicycles, or light industrial equipment and want a reversible, heat-treated puller that fits tighter spaces than larger models, this size is a practical middle-ground option. For very small or very large components, consider the other sizes in the lineup.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this puller remove both bearings and pulleys?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Its reversible jaws and adjustable spread allow it to extract bearings, pulleys, gears, and similar press-fit parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the central screw replaceable if damaged?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The forcing screw is durable CR-V steel; if damaged, contact BILITOOLS customer support for replacement options.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55168764903767,"sku":"B0B313F84B","price":70.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-view-8-inch-gear-puller.jpg?v=1790413460"},{"product_id":"bilitools-valve-spring-compressor-lapping-kit-13-piece-set-c-clamp-16-30mm-adapters","title":"BILITOOLS Valve Spring Compressor \u0026 Lapping Kit, 13‑Piece Set — C‑Clamp, 16–30mm Adapters","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS 13PCS Valve Spring Compressor Tools is a complete C-clamp compressor and valve-lapping set that lets you remove, install and lap valves and seals on cylinder heads removed from the engine.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit brings together a C-clamp style valve spring compressor, multiple adapter sizes, straight valve stem seal pliers and two wooden valve lappers so you can service retainers, keepers, seals and valve faces without buying separate specialty tools. Everything nests in a molded storage case for transport and organized storage, and the adapter range covers many common cars, motorcycles, ATVs and small engines when used on removed cylinder heads.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit make cylinder head valve work easier?\u003c\/h3\u003e\n\n\u003cp\u003eThe C-clamp compressor gives controlled, centered compression of valve springs so keepers and retainers are exposed for safe removal or installation. The included straight valve stem seal pliers reach into confined spring pockets, eliminating awkward tool angles and reducing the risk of damaging seals. Two valve lappers with four cup sizes let you manually lap valve faces to seats when needed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eC-clamp jaw for secure, centered spring compression\u003c\/li\u003e\n  \u003cli\u003eThree extension screws to adapt clamp reach for various head depths\u003c\/li\u003e\n  \u003cli\u003eStraight pliers designed for tight stem seal access\u003c\/li\u003e\n  \u003cli\u003eTwo wooden lappers with four rubber cups for valve-to-seat smoothing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich engine types and valve sizes will this 13-piece set work on?\u003c\/h3\u003e\n\n\u003cp\u003eThis toolset is intended for cylinder heads that have been removed from the engine and will fit many small- to medium-displacement engines. The five metal adapters in 16, 19, 23, 25 and 30 mm cover a broad range of valve spring retainer diameters and recessed seat layouts commonly found on cars, motorcycles, ATVs and lawn equipment. Always verify adapter size and spring geometry before use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSuitable for automotive, motorcycle and small-engine cylinder heads\u003c\/li\u003e\n  \u003cli\u003eAdapters in 16–30 mm to match common retainer sizes\u003c\/li\u003e\n  \u003cli\u003eBest used only with removed cylinder heads for safe access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and how do I use each one safely?\u003c\/h3\u003e\n\n\u003cp\u003eThe set contains a C-clamp jaw, three extension screws, five adapters, a hand lever, straight valve stem seal pliers and two valve lappers with four cup sizes. Center the compressor over the spring before compressing, work slowly to release keepers, and use the straight pliers to grip seals without cutting or deforming them. Use the lappers with a small amount of lapping compound and rotate carefully to avoid excessive material removal.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOne C-clamp jaw — compress springs on removed heads\u003c\/li\u003e\n  \u003cli\u003eThree extension screws — adjust clamp reach and clearance\u003c\/li\u003e\n  \u003cli\u003eFive adapters (16\/19\/23\/25\/30 mm) — fit various retainers\u003c\/li\u003e\n  \u003cli\u003eHand lever — apply controlled compression force\u003c\/li\u003e\n  \u003cli\u003eStraight valve stem seal pliers — remove\/install seals in tight areas\u003c\/li\u003e\n  \u003cli\u003eTwo wooden lappers, four cup sizes — manual valve lapping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The BILITOOLS 13PCS Valve Spring Compressor Tools kit is aimed at DIY mechanics, home garage technicians and small-engine repair pros who need a portable, full-featured kit for cylinder head valve and seal service. It's most useful when the cylinder head is removed and you want a single compact case with adapters, seal pliers and lapping tools to handle multiple valve sizes and recessed layouts without buying individual specialty tools. If you plan to work on installed heads with complex clearance constraints, consider a different compressor designed for in-situ use or consult an experienced technician.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this compressor with the cylinder head still on the engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This C-clamp compressor is designed for cylinder heads removed from the engine for safe, effective spring access.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include valve lapping compound?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The set includes wooden lappers and cups but does not include lapping compound; purchase that separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55168801931607,"sku":"B0DP2231CN","price":77.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-view-kit-open.jpg?v=1790414253"},{"product_id":"bilitools-oil-drain-plug-repair-kit-84-piece-m13-m22-metric-taps-replacement-plugs-washers","title":"BILITOOLS Oil Drain Plug Repair Kit, 84-Piece — M13–M22 Metric Taps, Replacement Plugs \u0026 Washers","description":"\u003cstrong\u003eBILITOOLS 84-piece Oil Drain Plug Repair Kit is a complete thread-repair and replacement solution for damaged or worn oil drain plug threads on most cars and light trucks.\u003c\/strong\u003e\n\n\u003cp\u003eIf a stripped oil drain plug or rounded sump thread is causing leaks or preventing proper sealing, this kit supplies the taps, replacement plugs and sealing washers needed to restore a secure, serviceable drain. The set covers the most common metric sizes (M13, M15, M17, M20, M22) and includes both copper and aluminum crush washers so you can reseal the pan with matching hardware.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this kit fits my vehicle?\u003c\/h3\u003e\n\u003cp\u003eCheck the OEM drain plug thread size listed in your vehicle service manual or measure the existing plug. The BILITOOLS kit contains taps and plugs for M13 x 1.25, M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5 and M22 x 1.5, covering most passenger cars and light trucks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes six taps matching common metric drain thread pitches.\u003c\/li\u003e\n  \u003cli\u003eContains 18 replacement sump plugs in assorted threads and head types.\u003c\/li\u003e\n  \u003cli\u003eProvides 30 copper and 30 aluminum crush washers for proper sealing.\u003c\/li\u003e\n  \u003cli\u003eWorks for vehicles with tapped oil pans needing an enlarged or new thread.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and steps are required to repair a stripped drain thread?\u003c\/h3\u003e\n\u003cp\u003eBasic hand tools plus the kit’s taps complete most repairs: a ratchet or T-handle for the tap, appropriate sockets for the new plugs, and a torque wrench to tighten to spec. Clean the pan, choose the correct tap size, chase or re-cut the damaged threads, then install a matching replacement plug and fresh washer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse a thread gauge or compare plugs to identify the correct size.\u003c\/li\u003e\n  \u003cli\u003eHand-turn taps slowly and back out chips to avoid cross-threading.\u003c\/li\u003e\n  \u003cli\u003eFit a new copper\/aluminum washer to the replacement plug for leak-free sealing.\u003c\/li\u003e\n  \u003cli\u003eFinish by torquing the plug to manufacturer specifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included and how do they help prevent future leaks?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies durable taps to reshape or enlarge damaged threads, a range of replacement sump plugs that match those newly cut threads, and crush washers to create a conforming seal. Replacing worn hardware and reseating with the correct washer reduces the risk of seepage and repeated damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSix high-quality taps sized for the most common metric drain threads.\u003c\/li\u003e\n  \u003cli\u003e18 replacement sump plugs to match repaired threads and head styles.\u003c\/li\u003e\n  \u003cli\u003e30 copper and 30 aluminum washers to suit different pan materials and sealing preferences.\u003c\/li\u003e\n  \u003cli\u003eAll parts stored in an organized case for easy selection during service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable are the taps and plugs in this kit?\u003c\/h3\u003e\n\u003cp\u003eThe taps and plugs are manufactured for workshop use and engineered to withstand multiple service operations when used properly. Using the correct tap size and proper technique helps ensure long-lasting threads and reduces the chance of repeat repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTaps designed to cut clean threads and resist wear under normal garage use.\u003c\/li\u003e\n  \u003cli\u003eReplacement plugs machined for consistent fit and seating against washers.\u003c\/li\u003e\n  \u003cli\u003eCopper and aluminum washers provided for reliable crush sealing across materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: The BILITOOLS 84-piece Oil Drain Plug Repair Kit is aimed at home mechanics, professional technicians and fleet maintainers who want a single, organized solution for repairing stripped oil pan threads. It’s ideal if you service multiple vehicles, perform DIY oil changes, or need a fast repair option to stop leaks and restore a secure drain plug fit without replacing the entire oil pan.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include taps for M20 threads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes an M20 x 1.5 tap plus matching plugs and washers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are both copper and aluminum washers provided?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The set supplies 30 copper and 30 aluminum crush washers to suit different pans.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55169283785047,"sku":"B09PYPYM82","price":74.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-packaging_31da9da6-a20f-435c-ba5b-9a58ef31ccc0.jpg?v=1790421667"},{"product_id":"bilitools-3l-vacuum-brake-bleeder-kit-universal-pneumatic-brake-fluid-bleeding-tool-3l-tank-silicone-hoses","title":"BILITOOLS 3L Vacuum Brake Bleeder Kit — Universal Pneumatic Brake Fluid Bleeding Tool, 3L Tank, Silicone Hoses","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS 3L Universal Brake Bleeder Kit is a pneumatic vacuum bleeder that lets one person quickly and cleanly draw brake fluid from calipers or wheel cylinders for bleeding or a full system flush.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact system uses shop air to create a steady vacuum, pulling old fluid directly out of the bleeder screw so you can service brakes without a helper or repeated pedal presses. With a large 3‑liter polyethylene tank, flexible silicone hoses, and a universal adapter set, it handles conventional and ABS systems while minimizing spills and backflow.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the pneumatic vacuum method make bleeding easier?\u003c\/h3\u003e\n\u003cp\u003eThe BILITOOLS unit replaces manual bottle-pump or gravity methods by using compressed air to generate a smooth, controlled vacuum that draws fluid from the bleed nipple into the reservoir. That steady suction reduces the risk of trapping air and keeps the master cylinder topped with the included refill bottle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperates at 70–170 PSI (4.8–11.6 bar) for consistent draw speed.\u003c\/li\u003e\n  \u003cli\u003eVacuum pulls fluid directly from bleeder screw—no special reservoir caps needed.\u003c\/li\u003e\n  \u003cli\u003ePrevents backflow and lowers spill risk for cleaner work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this kit handle a full system flush for cars with ABS?\u003c\/h3\u003e\n\u003cp\u003eYes — the oversized 3L tank provides enough capacity to bleed all four wheels and flush old fluid without stopping to empty the reservoir. The vacuum extraction method works on standard and most ABS-equipped systems when used according to vehicle service recommendations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3‑liter corrosion‑resistant PE tank holds multiple wheel changes.\u003c\/li\u003e\n  \u003cli\u003eUniversal bleeder adapter fits a broad range of bleed screws.\u003c\/li\u003e\n  \u003cli\u003eCompatible with common brake fluids; follow vehicle manufacturer fluid type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories are included and how do they help reduce mess?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with a long flexible hose, a refill bottle for the master cylinder, and a universal adapter set so you can reach awkward fittings and keep the reservoir sealed. Silicone tubing and a sealed tank construction minimize leaks while the refill bottle prevents the master cylinder from running dry during bleeding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e63‑inch flexible hose for access to tight or recessed bleeder screws.\u003c\/li\u003e\n  \u003cli\u003e1‑liter refill bottle to maintain proper master cylinder level.\u003c\/li\u003e\n  \u003cli\u003eDurable silicone hoses and secure fittings to cut down on fluid loss.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is the construction for repeated shop use?\u003c\/h3\u003e\n\u003cp\u003eThe main reservoir is molded from brake-fluid-resistant polyethylene to withstand common hydraulic fluids and the occasional drop. Combined with flexible silicone tubing and reliable seals, the kit is designed for repeated use in home or professional environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePE tank resists corrosion and fluid degradation over time.\u003c\/li\u003e\n  \u003cli\u003eSilicone hoses maintain flexibility and tight seals under vacuum.\u003c\/li\u003e\n  \u003cli\u003eDesigned for stable performance at recommended air pressures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS 3L Vacuum Brake Bleeder Kit is aimed at DIY mechanics, mobile technicians, and small shops that need a fast, single‑operator solution for brake bleeding and system flushing. It’s particularly useful for anyone who wants a cleaner, more efficient alternative to hand‑pump or gravity bleeders and needs enough capacity to service complete brake systems without constant emptying.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this work with ABS systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The vacuum method is compatible with most ABS-equipped systems, but follow your vehicle manufacturer’s bleeding sequence.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What air pressure do I need to operate it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a compressor set between 70–170 PSI (4.8–11.6 bar) for stable, effective vacuum performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55169295909207,"sku":"B09PYBGVSQ","price":103.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-view-3l-brake-bleeder.jpg?v=1790421883"},{"product_id":"bilitools-transmission-fill-tool-kit-7pc-aluminum-zinc-for-mercedes-9g-tronic-corrosion-resistant","title":"BILITOOLS Transmission Fill Tool Kit — 7pc Aluminium\/Zinc for Mercedes 9G‑Tronic, Corrosion‑Resistant","description":"\u003cp\u003e\u003cstrong\u003eBILITOOLS 7PCS Transmission Fill Tool is a complete aluminum and zinc‑alloy service kit designed to drain and refill ATF or hybrid transmission fluid on Mercedes 9G‑Tronic and a wide range of 8‑speed gearboxes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis compact seven‑piece set gathers the most common fill and drain adapters, plus a dedicated 9‑speed hybrid adapter and wrench\/bit combo, so you won’t need to hunt for individual parts during a transmission oil service. Built from aluminum and zinc alloy, the kit balances strength where torque matters with softer surfaces where thread damage risk is highest. It’s intended for do‑it‑yourself mechanics and professional shops working on Mercedes‑Benz models equipped with the 9G‑Tronic (type 725) as well as many other 8‑speed transmissions across major manufacturers.\u003c\/p\u003e\n\n\u003ch3\u003eWhich transmissions and models does this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit targets Mercedes‑Benz 9G‑Tronic transmissions (type 725.0xx) used in recent C‑Class, E‑Class, S‑Class, GLC, GLE and GLS vehicles and lists OEM equivalents for easy cross‑reference. It also includes adapters compatible with Nissan\/Infiniti 9G‑Tronic fitments and provides useful bits for a wide range of 8‑speed units from BMW, Audi, VW, Land Rover, Toyota, Dodge, and more. Check your vehicle’s service manual or dipstick access to match adapter threads before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit for Mercedes 9G‑Tronic (OEM references included)\u003c\/li\u003e\n  \u003cli\u003eWorks with Nissan\/Infiniti 9G‑Tronic models like Nissan Z (RZ34)\u003c\/li\u003e\n  \u003cli\u003eAdapters cover many common 8‑speed transmissions from other brands\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the materials and construction protect the transmission?\u003c\/h3\u003e\n\u003cp\u003eThe kit combines zinc alloy and aluminum parts to give strong, wear‑resistant contact where torque and durability are required while using softer aluminum at critical sealing interfaces to reduce thread and housing damage. All components are corrosion‑resistant for long life in garage environments. That material choice reduces the chance of galling and makes the kit suitable for repeated professional use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eZinc alloy adapters for secure, hardened connections\u003c\/li\u003e\n  \u003cli\u003eAluminum pieces to protect transmission threads and housings\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistance for reliability in workshop conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat adapters and tools are included for filling and servicing?\u003c\/h3\u003e\n\u003cp\u003eThe 7‑piece package includes dedicated fill adapters sized to common transmission fill ports: a general M12x1.5 adapter, a specific 9‑speed adapter for 9G‑Tronic, a hybrid 9‑speed adapter, and an 8‑speed bit plus wrench combo for additional coverage. These let you drain old ATF and accurately pump in new ATF or hybrid transmission fluid without jury‑rigging fittings. The set removes the need to order separate adapters for many routine services.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eM12x1.5 adapter for general fill tasks\u003c\/li\u003e\n  \u003cli\u003eDedicated 9‑speed and hybrid 9‑speed adapters for Mercedes models\u003c\/li\u003e\n  \u003cli\u003e8‑speed bit plus wrench combination for broader compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit save time and reduce risk during an oil change?\u003c\/h3\u003e\n\u003cp\u003eWith all essential fill and drain tools in one kit, you avoid delays sourcing multiple adapters and eliminate makeshift connections that can leak or damage ports. Correctly sized adapters speed line attachment and ensure better sealing during transfer of ATF or hybrid fluids. The result is a cleaner, faster service with less chance of cross‑threading or over‑torque mistakes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne kit eliminates searching for individual adapters\u003c\/li\u003e\n  \u003cli\u003eProperly sized fittings reduce leaks and spills\u003c\/li\u003e\n  \u003cli\u003eConsistent material choices lower thread and housing damage risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This BILITOOLS 7PCS Transmission Fill Tool kit is ideal for DIY enthusiasts who perform their own transmission services, independent mechanics, and small shops that need a compact, cost‑effective adapter set for Mercedes 9G‑Tronic and a wide range of 8‑speed transmissions. If you value correct fitment, repeatable performance, and materials chosen to protect transmission threads and housings, this kit provides a practical, professional‑grade set to keep on the shelf.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this kit compatible with Mercedes 9G‑Tronic transmissions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes dedicated adapters for Mercedes 9G‑Tronic (type 725.0xx) with OEM equivalent references for easy cross‑checking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the adapters safe for repeated professional use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Zinc alloy and aluminum construction provides wear resistance and thread protection, suitable for repeated workshop use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55170132214103,"sku":"B0GRHHG3VW","price":64.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-packaging-transmission-fill-kit.jpg?v=1790423748"},{"product_id":"bilitools-magnetic-spark-plug-socket-set-10-piece-with-3-8-torque-wrench-10-extension-gap-gauge","title":"BILITOOLS Magnetic Spark Plug Socket Set 10-Piece with 3\/8\" Torque Wrench, 10\" Extension \u0026 Gap Gauge","description":"\u003cp\u003e\u003cstrong\u003eThe BILITOOLS 10-piece magnetic spark plug socket set combines a click-style torque wrench, magnetic plug sockets, a 10\" extension and a gap gauge to help you install spark plugs accurately and safely.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you work on cars, motorcycles, lawn equipment or small engines, consistent spark plug torque and secure socket retention matter. This kit pairs a 72-tooth, click-type torque wrench calibrated from 10 to 45 ft-lbs (13.5–61 Nm) with a full range of magnetic spark plug sockets and a long reach extension so you can reach recessed plugs without dropping or over-tightening them. The included gap tool helps you measure and set electrode spacing to manufacturer specs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this set prevent over-tightening spark plugs?\u003c\/h3\u003e\n\n\u003cp\u003eThe torque wrench features a 72-tooth ratchet and a click mechanism that signals when you reach the preset torque, helping avoid over-torque damage. Its fine 5-degree swing arc gives precise adjustments in tight engine bays, and the calibration range covers most common spark plug settings for cars and small engines.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eClick torque range: 10–45 ft-lbs (13.5–61 Nm) for controlled tightening.\u003c\/li\u003e\n  \u003cli\u003e72-tooth ratchet: requires only a 5° swing for incremental torque control.\u003c\/li\u003e\n  \u003cli\u003eAudible click when torque is reached to stop tightening.\u003c\/li\u003e\n  \u003cli\u003e3\/8\" drive compatibility for common sockets and extensions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and features do the magnetic spark plug sockets have?\u003c\/h3\u003e\n\n\u003cp\u003eThe set includes seven magnetic sockets in both metric and SAE sizes to match a broad variety of spark plugs. Each socket has magnetic retention to hold the plug securely during insertion or removal, reducing the chance of dropping a fragile plug into the cylinder.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMetric and SAE sizes: 14mm, 16mm, 18mm, 9\/16\", 5\/8\", 3\/4\", 13\/16\" to fit most plugs.\u003c\/li\u003e\n  \u003cli\u003eMagnetic interior retains plug for safer handling and easier access.\u003c\/li\u003e\n  \u003cli\u003eDurable construction intended for repeated garage or shop use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the 10\" extension and gap tool improve spark plug service?\u003c\/h3\u003e\n\n\u003cp\u003eThe 10-inch, 3\/8\" drive extension reaches deep-set plugs found in modern engines, letting you work without awkward angles or stripped threads. The included gap gauge offers both SAE and metric thickness blades so you can measure and adjust electrode spacing to OEM recommendations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e10\" deep-reach extension for recessed spark plug wells and hard-to-reach cylinders.\u003c\/li\u003e\n  \u003cli\u003eSpark plug gap tool with SAE and metric markings for precise gap measurement.\u003c\/li\u003e\n  \u003cli\u003eCombination lets you remove, check, gap and torque plugs with one kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this set work for both cars and small engines?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit covers the most common plug sizes and torque needs across automobiles, motorcycles, ATVs and many small engines. While it suits a wide range of vehicles, always check your engine’s specific socket size and torque spec before use to ensure compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUseful for passenger vehicles, light trucks, motorcycles and small engines.\u003c\/li\u003e\n  \u003cli\u003eTorque range fits typical spark plug manufacturer recommendations.\u003c\/li\u003e\n  \u003cli\u003eVerify vehicle-specific socket size and torque spec before beginning work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BILITOOLS 10 PCS Magnetic Spark Plug Socket Set is designed for DIY mechanics, professional technicians, and anyone who performs regular engine maintenance. It’s a practical all-in-one solution for safe plug removal, accurate gap measurement and consistent torque application when servicing spark plugs on a variety of engines.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What torque range does the wrench cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The click-style wrench adjusts from 10 to 45 ft-lbs (13.5–61 Nm).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which socket sizes are included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Sockets included: 14mm, 16mm, 18mm, 9\/16\", 5\/8\", 3\/4\", and 13\/16\".\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BILITOOLS","offers":[{"title":"Default Title","offer_id":55170155381079,"sku":"B0B2ZWLKR5","price":100.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bilitools-front-packaging-spark-plug-set.jpg?v=1790424302"}],"url":"https:\/\/britishgarage.co.uk\/collections\/bilitools.oembed","provider":"British Garage","version":"1.0","type":"link"}