{"title":"BLACKHORSE-RACING","description":"\u003cp\u003eBrowse 26 BLACKHORSE-RACING products at British Garage, including engine cooling \u0026amp; air con parts, motorcycle \u0026amp; atv parts and caravan exterior parts. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked UK delivery on every order and 30-day returns.\u003c\/p\u003e","products":[{"product_id":"blackhorse-racing-hpop-high-pressure-oil-pump-seal-gasket-kit-for-ford-7-3l-1994-2003-complete-o-rings-base-gasket","title":"BLACKHORSE-RACING HPOP High-Pressure Oil Pump Seal \u0026 Gasket Kit for Ford 7.3L (1994–2003) — Complete O‑rings \u0026 Base Gasket","description":"\u003cp\u003e\u003cstrong\u003eComplete seal and gasket overhaul kit for the high-pressure oil pump (HPOP) used on Ford 7.3L engines from 1994–2003, including base gasket and all necessary O-rings and seals for a leak-resistant reinstall.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you service the HPOP on a 7.3L Power Stroke, having every correct seal, O-ring and a reliable base gasket saves time and prevents post-repair leaks. BLACKHORSE-RACING assembled this kit to include parts often omitted in other aftermarket sets, so technicians and DIY mechanics can replace the pump seals and reinstall the regulator with confidence. The kit fits late-90s to early-2000s Ford 7.3L models and replaces several OE part numbers for straightforward cross-referencing.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly is included and why does it matter?\u003c\/h3\u003e\n\u003cp\u003eThis kit gathers the seals and small parts needed to refresh the entire high-pressure oil pump assembly and its base flange, reducing the risk of oil seepage and pressure loss after service. Using all recommended seals during reassembly helps the regulator and pump operate within designed tolerances.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete set of O-rings for pump housings and regulator\u003c\/li\u003e\n\u003cli\u003eBase gasket sized to match the HPOP mounting surface\u003c\/li\u003e\n\u003cli\u003eAssorted seals and hardware typically missing from competing kits\u003c\/li\u003e\n\u003cli\u003eMaterials chosen for oil resistance and long-term sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this kit compatible with my engine and which OE numbers does it replace?\u003c\/h3\u003e\n\u003cp\u003eThe BLACKHORSE-RACING HPOP kit is designed specifically for Ford 7.3L Power Stroke engines built between 1994 and 2003. It’s intended as a direct-fit seal and gasket package to simplify part selection during HPOP service.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFitment: 1994–2003 Ford 7.3L Power Stroke\u003c\/li\u003e\n\u003cli\u003eOE references replaced: F6TZ-9417-AA, 2C3Z-9G804-AB, 4C3Z-9C977-AA\u003c\/li\u003e\n\u003cli\u003eMade to match original pump sealing surfaces\u003c\/li\u003e\n\u003cli\u003eHelps avoid buying multiple separate seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this kit improve my repair process or performance?\u003c\/h3\u003e\n\u003cp\u003eBy providing a full complement of pump and regulator seals, the kit reduces rework and the need to source individual parts mid-job. Properly installed seals minimize oil leaks and help maintain correct system pressures, which supports reliable pump operation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFewer trips to the parts store—everything included\u003c\/li\u003e\n\u003cli\u003eHigh-quality sealing materials for durability\u003c\/li\u003e\n\u003cli\u003eCleaner reassembly with the correct gasket geometry\u003c\/li\u003e\n\u003cli\u003eLower chance of post-repair oil seepage or pressure issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I prepare for installation and are any special tools required?\u003c\/h3\u003e\n\u003cp\u003eBasic mechanical tools and a clean work area are needed. Some tasks—like controlled torque on the pump bolts and regulator reinstallation—benefit from a torque wrench and appropriate hand tools; follow factory service instructions for safety and correct procedure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTorque wrench for pump and mounting hardware\u003c\/li\u003e\n\u003cli\u003eClean solvent and lint-free rags for mating surfaces\u003c\/li\u003e\n\u003cli\u003eSmall picks or seal drivers for installing O-rings without damage\u003c\/li\u003e\n\u003cli\u003eFactory service manual recommended for torque specs and sequence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: technicians, mobile diesel mechanics and experienced DIYers working on Ford 7.3L Power Stroke HPOP repairs who want one consolidated kit with high-quality seals and a correct-fit base gasket. This BLACKHORSE-RACING kit reduces parts hunting, replaces common OE numbers, and supplies components often left out of lesser seal sets—ideal for thorough HPOP maintenance or rebuilds where a lasting, leak-resistant result is the goal.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit all Ford 7.3L HPOP models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — this seal and gasket kit is intended for 1994–2003 Ford 7.3L Power Stroke HPOP applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit replace OEM part numbers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It replaces OE references F6TZ-9417-AA, 2C3Z-9G804-AB and 4C3Z-9C977-AA for easier cross-reference.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55161122881879,"sku":"B07H9L4DBV","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-hpop-kit-front-packaging.jpg?v=1790322496"},{"product_id":"blackhorse-racing-hammer-lock-coupling-links-1-2-in-2-pack-red-g80-alloy-12-000-lb-wll","title":"BLACKHORSE-RACING Hammer Lock Coupling Links 1\/2 in 2-Pack Red — G80 Alloy, 12,000 lb WLL","description":"\u003cp\u003e\u003cstrong\u003eA pair of BLACKHORSE-RACING Grade 80, 1\/2-inch hammer lock coupling links built for heavy towing—rated 12,000 lbs working load and finished in rust-resistant red powder coat.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two hammerlock safety chain connectors are designed to attach quickly to trailer safety chains, tow hooks or clevises on trucks and trailers. Constructed from G80 alloy steel and colored with a durable red powder coat, they balance strength and corrosion resistance for regular use. The simple hammer-pin installation makes them suitable for field repairs or as a permanent towing accessory.\u003c\/p\u003e\n\n\u003ch3\u003eHow strong and reliable are these hammer lock coupling links?\u003c\/h3\u003e\n\u003cp\u003eEach coupling link is manufactured from Grade 80 (G80) high-strength alloy steel, tested for heavy-duty towing tasks. They carry a Working Load Limit of 12,000 lbs, giving you a high safety margin for most light- and medium-duty towing applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: heat-treated G80 alloy steel for higher tensile strength\u003c\/li\u003e\n  \u003cli\u003eWorking Load Limit: 12,000 lbs per link\u003c\/li\u003e\n  \u003cli\u003eGrade 80 rating indicates superior load-bearing capacity versus standard chain fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my truck or trailer chains—what vehicles are they compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe 1\/2-inch shank size and common hammerlock design make these connectors broadly compatible with safety chain kits and towing hardware. They work well as a safety chain link for many pickup trucks, including Chevy, Ford and GMC models, and fit most trailers that use 1\/2\" chain or clevis-type attachment points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSize: 1\/2-inch pin\/shank matches common safety chains\u003c\/li\u003e\n  \u003cli\u003eWorks with clevises, hooks and chain ends on trailers and trucks\u003c\/li\u003e\n  \u003cli\u003eRecommended for vehicles that specify 1\/2\" chain fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain the hammer lock coupling link properly?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: lubricate the pin tip, align the link into the chain or clevis, then drive the pin into the locking ring using a hammer or C-clamp until it seats securely. Periodic inspection and light lubrication will keep the link functioning and reduce corrosion risk despite the powder-coat protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApply a small amount of grease to the pin before installation\u003c\/li\u003e\n  \u003cli\u003eUse a hammer or a C-clamp to drive the pin into the locking ring\u003c\/li\u003e\n  \u003cli\u003eInspect pins, rings and powder coat for wear; re-lubricate as needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat finish and durability features help prevent rust and wear?\u003c\/h3\u003e\n\u003cp\u003eThe links are finished with a red powder coat, providing a protective barrier against moisture and road grime. Combined with the corrosion resistance of the alloy steel and routine maintenance, the coating extends service life in outdoor towing environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRed powder coating resists rust and abrasion\u003c\/li\u003e\n  \u003cli\u003eAlloy steel core retains strength after surface wear\u003c\/li\u003e\n  \u003cli\u003eVisual color makes inspection and identification easier\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These BLACKHORSE-RACING 2-piece 1\/2\" hammer lock coupling links are aimed at truck and trailer owners, fleet operators, and anyone who needs durable safety chain connectors for towing or recovery. If you perform regular towing, maintain trailers, or want a dependable spare coupling link for Chevy, Ford, GMC or similar vehicles, this Grade 80 option delivers high load capacity, simple field installation and rust-resistant protection.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the Working Load Limit of these coupling links?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each BLACKHORSE-RACING Grade 80 1\/2\" hammer lock link has a 12,000 lb working load limit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I install the hammer lock pin?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Grease the pin tip, align the link, then drive the pin into the locking ring with a hammer or C-clamp until fully seated.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55162944553303,"sku":"B0BGHMJN7J","price":47.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-packaging.jpg?v=1790339967"},{"product_id":"blackhorse-racing-6-slim-electric-cooling-fan-6-inch-black-650-cfm-push-pull-low-profile-kit","title":"BLACKHORSE-RACING 6\" Slim Electric Cooling Fan 6-inch Black — 650 CFM Push\/Pull Low-Profile Kit","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING 6\" Small Slim Push-Pull Electric Cooling Fan is a compact 12V, 80W cooling kit delivering up to 650 CFM to help manage radiator, oil cooler and engine bay temperatures.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact fan assembly is built for tight engine bays where space matters. The kit includes mounting brackets and tie straps, and its reversible push\/pull blade orientation allows you to adapt airflow direction without swapping hardware. Designed for universal fitment on many classic and modern engines, this fan offers a high airflow-to-size ratio for radiators, intercoolers, oil coolers and A\/C condensers.\u003c\/p\u003e\n\n\u003ch3\u003eHow much airflow and power does this fan deliver?\u003c\/h3\u003e\n\u003cp\u003eThe BLACKHORSE-RACING 6\" fan is rated at 12V and 80W with a maximum speed of 2250 RPM, producing up to 650 CFM under ideal conditions. That combination of voltage, wattage and RPM gives strong, focused airflow from a very small footprint.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVoltage: DC 12V\u003c\/li\u003e\n  \u003cli\u003ePower: 80 Watts\u003c\/li\u003e\n  \u003cli\u003eMax speed: 2250 RPM\u003c\/li\u003e\n  \u003cli\u003eMax airflow: 650 CFM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this slim fan fit in tight or modified engine bays?\u003c\/h3\u003e\n\u003cp\u003eYes — the fan’s slim profile is engineered for installations where depth is limited, such as between radiator and condenser or behind small-core radiators. The included brackets and tie straps make it adaptable to a variety of mounting points and custom setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlim housing suits compact clearance areas\u003c\/li\u003e\n  \u003cli\u003eMount brackets and straps included for versatile placement\u003c\/li\u003e\n  \u003cli\u003eWorks behind radiators, A\/C condensers, and intercoolers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this fan as push or pull, and is it easy to switch?\u003c\/h3\u003e\n\u003cp\u003eThe fan supports both push and pull configurations. To change the airflow direction you simply reverse the power cord connection and flip the fan blades, so no additional parts are required to convert modes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePush or pull operation by wiring and blade flip\u003c\/li\u003e\n  \u003cli\u003eNo separate motor or casing swap needed\u003c\/li\u003e\n  \u003cli\u003eIdeal for testing both airflow directions to find best cooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does the kit include?\u003c\/h3\u003e\n\u003cp\u003eThe fan is molded from durable plastic formulated for good heat resistance and corrosion resistance, offering long service life in under-hood environments. Its design reduces pump noise and maintains steady airflow even under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable plastic construction resists heat and corrosion\u003c\/li\u003e\n  \u003cli\u003eNoise-reducing blade geometry\u003c\/li\u003e\n  \u003cli\u003eBuilt for continuous duty in engine bays\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This BLACKHORSE-RACING 6\" slim push-pull fan kit is suited to hot rod builders, classic car restorers, and anyone with limited radiator clearance who needs a powerful, space-saving cooling solution. It fits a wide range of V8 and V6 engines used in Chevy, Ford, Buick, Pontiac, Cadillac and other popular platforms, and is an easy add-on for oil coolers, transmissions, intercoolers and A\/C condensers when extra airflow is required.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this fan compatible with my 350 or 302 engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit lists fitment for many Chevy and Ford engines including 350 and 302; verify mounting clearance and electrical connection before installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I switch between push and pull modes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Flip the fan blades and reverse the power cord wiring to change airflow direction; no extra parts needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55165895737687,"sku":"B07T65FBR1","price":36.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-view-fan-kit.jpg?v=1790359462"},{"product_id":"blackhorse-racing-go-kart-drive-belt-725-3-piece-kit-for-30-series-torque-converters-durable-rubber","title":"BLACKHORSE-RACING Go Kart Drive Belt 725 — 3-Piece Kit for 30-Series Torque Converters, Durable Rubber","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING 3Pcs 725 drive belt kit is a set of three asymmetrical replacement belts engineered to fit 30-series torque converters and many Hammerhead and Trailmaster mid-kart setups.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen your go-kart loses smooth acceleration, slipping belts or worn ribs are common culprits. This 3-piece 725 belt kit from BLACKHORSE-RACING provides aftermarket replacements built from durable rubber to restore reliable power transfer for 30 series torque converter systems. The kit is intended for hobbyists and technicians who need several spare belts on hand for maintenance, track days, or to swap parts quickly between sessions.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and torque converters will these 725 belts fit?\u003c\/h3\u003e\n\u003cp\u003eThese belts are designed for 30-series torque converters and are commonly used in mid-kart models from brands like Hammerhead and Trailmaster. Some related kits use a 669 belt, so verify the number stamped on your current belt before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 30-series torque converters and similar clutch systems\u003c\/li\u003e\n  \u003cli\u003eCompatible with many Hammerhead and Trailmaster mid-kart models\u003c\/li\u003e\n  \u003cli\u003eCheck existing belt code (725 vs 669) for exact match\u003c\/li\u003e\n  \u003cli\u003eUseful as spare or replacement belts for track maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and heat-resistant are these aftermarket replacement belts?\u003c\/h3\u003e\n\u003cp\u003eBLACKHORSE-RACING belts are manufactured from a robust rubber compound meant to resist heat, oil exposure, and typical wear from everyday karting. They are built for high mileage usage and repeated installations, making them dependable for practice runs and competitive events.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMade from quality rubber for long service life\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist oil and heat encountered in kart drivetrains\u003c\/li\u003e\n  \u003cli\u003eAsymmetrical rib profile to maintain traction and reduce slip\u003c\/li\u003e\n  \u003cli\u003eManufactured as aftermarket replacements to meet common kit specs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the practical advantages of buying a 3-piece kit instead of a single belt?\u003c\/h3\u003e\n\u003cp\u003eHaving three belts available reduces downtime between sessions and ensures you always have a fresh belt ready when wear or damage occurs. Multiple belts also let you test different break-in periods and compare performance as belts age, which helps fine-tune clutch response for your karting conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImmediate spares minimize time lost to belt changes\u003c\/li\u003e\n  \u003cli\u003eAllows side-by-side performance checks of new vs. worn belts\u003c\/li\u003e\n  \u003cli\u003eCost-effective versus purchasing single belts separately\u003c\/li\u003e\n  \u003cli\u003eConvenient for teams, rentals, or frequent riders\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what should I check before fitting?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with clutch and torque converter maintenance: remove the old belt, inspect pulleys for wear, and fit the new 725 belt with correct alignment. Before installing, confirm belt size, inspect the clutch faces and sheaves for nicks or dirt, and follow the torque converter manufacturer's service recommendations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove old belt and inspect clutch components for damage\u003c\/li\u003e\n  \u003cli\u003eFit new belt ensuring proper seating on sheaves and pulleys\u003c\/li\u003e\n  \u003cli\u003eVerify belt code (725) matches your torque converter requirements\u003c\/li\u003e\n  \u003cli\u003eRun a short break-in at low load, then recheck belt seating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BLACKHORSE-RACING 3Pcs 725 belt kit is aimed at go-kart owners, mechanics, club racers, and rental operators who use 30-series torque converters or mid-kart platforms like Hammerhead and Trailmaster. It’s a practical choice for anyone who needs dependable, aftermarket replacement belts for routine maintenance, track preparation, or to keep multiple karts ready for repeated use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these 725 belts compatible with 669 belts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, 725 and 669 are different sizes\/profiles. Check the number printed on your current belt to confirm proper fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many belts should I carry for track days?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Carrying at least two spares is wise; this 3-piece kit gives one installed belt plus two replacements for minimal downtime.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55166297145687,"sku":"B08GWQLHTM","price":36.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-packaging_d7a43d52-08bb-42ac-a14c-ea2db7026b10.jpg?v=1790366599"},{"product_id":"blackhorse-racing-10-slim-12v-radiator-fan-kit-red-push-pull-800-cfm-low-profile-2-54-thick","title":"BLACKHORSE-RACING 10\" Slim 12V Radiator Fan Kit — Red, Push\/Pull 800 CFM, Low-Profile 2.54\" Thick","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING's 10\" slim 12V push\/pull electric radiator fan kit is a compact, reversible cooling fan assembly designed to boost radiator airflow up to 800 CFM for a wide range of vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis low-profile 10-inch fan pack includes the fan, mounting brackets and tie straps, and is built for engine-bay clearance where space is tight. With a six-blade design, 80W motor power and a peak speed around 2400 RPM, the fan delivers targeted airflow to help manage temperatures for radiators, intercoolers and auxiliary cooling components without taking up excessive thickness.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the slim profile help in cramped engine bays?\u003c\/h3\u003e\n\u003cp\u003eThe fan's thin construction (about 2.54 inches thick) keeps it from interfering with hood clearance, belts or other nearby hardware. That smaller footprint also makes it easier to fit directly to the radiator face or in front\/behind tight mounting points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact 11.42\" diameter fits tight radiator spaces\u003c\/li\u003e\n  \u003cli\u003e2.54\" thickness minimizes obstruction to other components\u003c\/li\u003e\n  \u003cli\u003eUniversal brackets adapt to common radiator frames\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does 'push\/pull reversible' mean and why does it matter?\u003c\/h3\u003e\n\u003cp\u003eReversible operation lets you install the fan to either push air through the radiator (mounted ahead of the core) or pull air through it (mounted behind the core), giving flexibility in intake or exhaust setups. This helps tailor airflow direction to vehicle design and cooling strategy.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSwitch or wiring config changes airflow direction\u003c\/li\u003e\n  \u003cli\u003eUseful for front-mounted radiators, intercoolers, and supplemental cooling\u003c\/li\u003e\n  \u003cli\u003eAllows optimization for condenser or transmission coolers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much cooling performance can I expect from this 10\" fan?\u003c\/h3\u003e\n\u003cp\u003eThe six-blade, 80W motor is rated up to ~800 CFM with a top speed near 2400 RPM, offering measurable airflow to assist primary cooling systems. While it supplements factory cooling, the fan is best used as an auxiliary or replacement fan matched to radiator size and vehicle demands.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum fan airflow: 800 CFM (approximate)\u003c\/li\u003e\n  \u003cli\u003eRated motor output: 80W; RPM around 2400±10%\u003c\/li\u003e\n  \u003cli\u003eSix-blade design for efficient, stable airflow\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and how durable is it?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes the fan, mount brackets and tie straps for straightforward installation and positioning. The housing and materials are chosen for heat and corrosion resistance to extend service life in under-hood conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: fan assembly, mounting brackets, tie straps\u003c\/li\u003e\n  \u003cli\u003eHeat-resistant, corrosion-resistant materials for longevity\u003c\/li\u003e\n  \u003cli\u003eWiring and connectors designed for standard 12V vehicle systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BLACKHORSE-RACING 10\" Slim Fan Push\/Pull Kit suits DIY mechanics, track enthusiasts and everyday drivers who need a compact, flexible auxiliary cooling solution. It's ideal when factory fans are marginal, extra airflow is required for intercoolers or AC condensers, or when space constraints rule out thicker aftermarket fans. Before purchase, verify radiator dimensions and mounting options to ensure proper fitment for your vehicle.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fan fit my radiator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Measure radiator core diameter and mounting space; the fan is ~11.42\" diameter and 2.54\" thick, and uses universal brackets for many setups.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the fan blow both directions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it's reversible for push or pull installation by changing mounting orientation or wiring configuration.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55166803149143,"sku":"B014KK7NIM","price":53.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-view-fan.jpg?v=1790371551"},{"product_id":"blackhorse-racing-10-slim-electric-radiator-fan-kit-12v-800-cfm-reversible-push-pull-2-54-thin-black","title":"BLACKHORSE-RACING 10\" Slim Electric Radiator Fan Kit — 12V 800 CFM Reversible Push\/Pull, 2.54\" Thin Black","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING's 10-inch slim electric radiator fan kit is a reversible 12V, 80W cooling solution that delivers up to 800 CFM in a low-profile 2.54\" package with universal mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for tight engine bays and varied vehicle setups, this fan kit combines a six-blade high-flow impeller with corrosion-resistant materials and a compact frame so you can add extra cooling without sacrificing clearance. The kit arrives with mounting brackets and tie straps for fast installation, and its reversible motor supports both push and pull configurations to suit radiators, intercoolers, condensers, and other heat exchangers.\u003c\/p\u003e\n\n\u003ch3\u003eHow much airflow and power does this 10\" fan produce?\u003c\/h3\u003e\n\n\u003cp\u003eThe BLACKHORSE-RACING 10\" fan is engineered for strong airflow with modest electrical draw. It runs on a 12V system, consumes up to 80W, and is rated to move a maximum of around 800 CFM while drawing no more than approximately 6 amps.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaximum airflow: ~800 CFM for effective radiator and condenser ventilation.\u003c\/li\u003e\n  \u003cli\u003ePower: 12V DC, 80W motor for balanced performance and efficiency.\u003c\/li\u003e\n  \u003cli\u003eCurrent draw: ≤6A under normal conditions to work with common automotive electrical systems.\u003c\/li\u003e\n  \u003cli\u003eSpeed: Rated around 2400 RPM (±10%) for reliable high-speed operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the slim design fit in my crowded engine bay?\u003c\/h3\u003e\n\n\u003cp\u003eYes—the fan is purpose-built for tight spaces. With an overall thickness of roughly 2.536 inches and an overall diameter near 11.42 inches, it clears most radiators and accessories where thicker blowers won’t fit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOverall fan diameter: 11.42 inches to match common radiator cores.\u003c\/li\u003e\n  \u003cli\u003eSlim thickness: 2.536 inches for improved clearance around headers, shrouds, and A\/C lines.\u003c\/li\u003e\n  \u003cli\u003eSix-blade impeller: balances compact form with strong airflow.\u003c\/li\u003e\n  \u003cli\u003eDurable construction: heat- and corrosion-resistant materials increase service life in engine environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this fan be used as push or pull, and what mounts are included?\u003c\/h3\u003e\n\n\u003cp\u003eThe motor supports reversible operation so the unit can be mounted as either a pusher (in front of the radiator) or a puller (behind the radiator), giving installation flexibility. The kit contains metal mounting brackets and tie straps for secure attachment to different radiator styles and aftermarket cores.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReversible motor: configure as push or pull depending on airflow needs.\u003c\/li\u003e\n  \u003cli\u003eIncluded hardware: mounting brackets and tie straps for universal fitment.\u003c\/li\u003e\n  \u003cli\u003eUniversal fit: works with many radiators, intercoolers, condensers, oil coolers, and transmission coolers.\u003c\/li\u003e\n  \u003cli\u003eBlack finish: unobtrusive aesthetic that blends with engine bay components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the kit for daily driving and performance use?\u003c\/h3\u003e\n\n\u003cp\u003eThe design emphasizes longevity in automotive environments by using heat- and corrosion-resistant materials and a robust six-blade impeller. It’s intended as an auxiliary cooling solution for both everyday and demanding conditions without adding significant weight or bulk.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaterial resilience: components resist heat and corrosion to extend service life.\u003c\/li\u003e\n  \u003cli\u003eBalanced fan blade design: reduces vibration for smoother operation.\u003c\/li\u003e\n  \u003cli\u003eLow amp draw: minimizes strain on the vehicle electrical system during extended use.\u003c\/li\u003e\n  \u003cli\u003eService support: included instructions and customer assistance from BLACKHORSE-RACING if you need help.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The BLACKHORSE-RACING 10\" Slim Fan Push\/Pull kit is aimed at car owners, mechanics, and fabricators who need extra cooling but have limited space—compact-swap imports, compact trucks, engine bays with tight clearances, or anyone adding an auxiliary cooler for performance or towing. It’s also useful for workshops that retrofit radiators, intercoolers, or condensers and need a reliable, reversible fan that installs quickly using the supplied brackets and straps.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fan fit my radiator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits many radiators; check core diameter and available clearance—overall diameter 11.42\" and thickness 2.536\".\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use it as push and pull?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The motor is reversible so you can mount it as either a pusher or puller depending on your setup.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55167070437719,"sku":"B014KK7OCW","price":53.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-view-10-inch-slim-fan.jpg?v=1790376417"},{"product_id":"blackhorse-racing-7-slim-12v-radiator-cooling-fan-kit-black-push-pull-800-cfm-compact-2-64-profile","title":"BLACKHORSE-RACING 7\" Slim 12V Radiator Cooling Fan Kit — Black, Push\/Pull, 800+ CFM, Compact 2.64\" Profile","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING's 7\" slim 12V electric fan kit is a reversible push\/pull radiator cooling solution that delivers high airflow in a low-profile package with mounting brackets and tie straps.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eCompact yet powerful, this 7-inch fan assembly was engineered to increase airflow through radiators and engine bays where space is limited. The set includes the fan, bracket hardware and straps to simplify installation on many vehicles. With a slim thickness and corrosion-resistant materials, it fits tight spaces while resisting heat and road conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow much airflow and power does this fan produce?\u003c\/h3\u003e\n\u003cp\u003eThe BLACKHORSE-RACING fan is rated for strong airflow and high rotational speed while drawing modest current. It runs on 12 volts, consumes about 80 watts, and delivers at least 800 CFM with a top speed near 2,900 RPM.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVoltage: 12 V nominal\u003c\/li\u003e\n  \u003cli\u003ePower: 80 W\u003c\/li\u003e\n  \u003cli\u003eAirflow: ≥ 800 CFM\u003c\/li\u003e\n  \u003cli\u003eMax speed: ~2,900 ±10% RPM and amp draw ≤ 5 A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this slim fan fit my radiator and tight engine bay?\u003c\/h3\u003e\n\u003cp\u003eThe fan’s thin profile and compact outer diameter make it suitable for cramped mounting locations and narrow core spacing. Overall diameter is about 8.27 inches and the fan thickness is 2.64 inches, so it’s designed to clear hoses and shrouds that larger fans cannot.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall diameter: 8.27 in for clearance checks\u003c\/li\u003e\n  \u003cli\u003eFan thickness: 2.64 in for tight-fit installations\u003c\/li\u003e\n  \u003cli\u003e10-blade design for concentrated airflow in narrow gaps\u003c\/li\u003e\n  \u003cli\u003eIncludes brackets and tie straps for adjustable mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan the fan be used as a pusher and a puller, and how reliable is it?\u003c\/h3\u003e\n\u003cp\u003eThis unit is reversible and can be installed to either push air through the radiator or pull air across it, depending on your setup. Materials are chosen for heat and corrosion resistance to extend service life in under-hood environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReversible mounting supports both push and pull configurations\u003c\/li\u003e\n  \u003cli\u003e10-blade rotor optimized for steady airflow and pressure\u003c\/li\u003e\n  \u003cli\u003eHeat- and corrosion-resistant construction for durability\u003c\/li\u003e\n  \u003cli\u003eIncludes hardware and straps to secure the fan reliably\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what’s included in the kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with mounting brackets and tie straps so you can adapt the fan to a variety of radiator shapes and mounting points. Basic electrical wiring to a 12V source and a secure mechanical attachment are all that’s required for most installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes with mounting brackets and tie straps for flexibility\u003c\/li\u003e\n  \u003cli\u003eSimple 12V wiring: fuse, switch or temperature controller recommended\u003c\/li\u003e\n  \u003cli\u003eSlim design reduces the need for shroud modifications\u003c\/li\u003e\n  \u003cli\u003eInstructions provided in the main product image for reference\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: drivers and technicians needing additional radiator airflow in confined engine bays, owners of custom builds or older cars with limited fan clearance, and anyone who wants a compact aftermarket fan that can be mounted as a pusher or puller. Ideal for supplemental cooling on cars, trucks, ATV\/UTV projects, or custom radiator-retrofit applications where space and airflow matter.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this fan reversible for push or pull mounting?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the fan is reversible and can be mounted to either push air through or pull air across the radiator.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What electrical requirements does the fan need?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It runs on 12V, draws up to about 5 amps and consumes approximately 80W; use an inline fuse and proper switch or controller.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55167198921047,"sku":"B014KK7M06","price":52.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-7in-front-view.jpg?v=1790378068"},{"product_id":"blackhorse-racing-torque-converter-belts-3-pack-40-series-7-8-x-33-7-8-replacement-for-comet-203785","title":"BLACKHORSE-RACING Torque Converter Belts 3-Pack — 40-Series 7\/8\" x 33-7\/8\" Replacement for Comet 203785","description":"\u003cp\u003e\u003cstrong\u003eThree replacement 40-series cogged torque-converter belts designed to fit common go-kart Torq-A-Verter drive systems and replace Comet 203785, 203785A, and MANCO 12346 belts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese BLACKHORSE-RACING belts are new, symmetrical cogged belts sized for many 40- and 45-series torque-converter applications. Built to the same form factor as the OEM belts they replace, this three-pack gives you immediate spares for track days, maintenance, or repairs so your kart gets back on the course quickly. The belts are 7\/8\" wide and measure 33-7\/8\" long, engineered for reliable engagement with torque-converter pulleys while helping maintain consistent power transfer under varying loads.\u003c\/p\u003e\n\n\u003ch3\u003eWhich karts and systems will these belts fit?\u003c\/h3\u003e\n\n\u003cp\u003eThese belts are made for 40-series Torq-A-Verter setups and are also compatible with many 45-series systems that use the same belt profile. They specifically replace Comet part numbers 203785 and 203785A, as well as MANCO 12346, making them a direct fit for many popular small-engine go karts and utility karts.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWidth: 7\/8\"; Length: 33-7\/8\" for correct pulley engagement\u003c\/li\u003e\n  \u003cli\u003eSymmetrical cogged 40-series profile for compatible converters\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for Comet 203785, 203785A, and MANCO 12346\u003c\/li\u003e\n  \u003cli\u003eWorks on many 40 and 45 series Torq-A-Verter drive systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable are these replacement belts?\u003c\/h3\u003e\n\n\u003cp\u003eThese belts are new and designed to resist typical wear from standard recreational and light-utility karting. The cogged construction aids flexibility around pulleys and reduces heat buildup, which can extend service life compared with a worn, glazing belt. Proper installation and routine inspection will maximize longevity.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNew, symmetrical 40-series cogged belts for consistent tooth engagement\u003c\/li\u003e\n  \u003cli\u003eHeat-dissipating design helps reduce premature glazing\u003c\/li\u003e\n  \u003cli\u003eThree belts included so you have immediate spares for fast swaps\u003c\/li\u003e\n  \u003cli\u003eUse visual inspection for cracks, fraying, or hardened sections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installing these belts?\u003c\/h3\u003e\n\n\u003cp\u003eBefore swapping belts, inspect pulleys, idlers, and the torque converter for wear or misalignment—these can shorten belt life or cause poor performance. Confirm the belt length and width match the required 33-7\/8\" by 7\/8\" specification and verify the 40-series cog profile fits the pulley teeth. Tension and alignment are critical: adjust according to your kart manufacturer’s recommendations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMeasure existing belt to verify 33-7\/8\" length and 7\/8\" width\u003c\/li\u003e\n  \u003cli\u003eCheck pulley teeth, idler bearings, and converter surfaces for damage\u003c\/li\u003e\n  \u003cli\u003eInstall with correct tension; avoid over-tightening or overtensioning\u003c\/li\u003e\n  \u003cli\u003eKeep a spare from the three-pack for quick roadside or track-side change\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy buy a three-pack instead of a single belt?\u003c\/h3\u003e\n\n\u003cp\u003eBuying three belts provides immediate replacements so you can swap a worn or damaged belt without delay, reducing downtime during events or maintenance. Multiple belts also offer value compared with single-piece purchases and reduce the need to reorder when another belt reaches its service limit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eImmediate on-hand spares for quick repairs during events\u003c\/li\u003e\n  \u003cli\u003eCost-efficient compared with buying belts individually\u003c\/li\u003e\n  \u003cli\u003eUseful for multi-vehicle owners or shops servicing several karts\u003c\/li\u003e\n  \u003cli\u003eHelps plan preventative maintenance with scheduled replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: BLACKHORSE-RACING 3PCS 40 Series torque converter belts suit kart owners, small repair shops, and track mechanics who need OEM-compatible replacements for Comet 203785 \/ 203785A and MANCO 12346. Choose this three-pack if you want correct-size, cogged 40-series belts ready for routine maintenance, spares for racing days, or to keep a fleet of recreational karts running without interruption.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these belts direct replacements for Comet 203785A?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These belts are manufactured to replace Comet 203785 and 203785A, as well as MANCO 12346, fitting compatible 40-series setups.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the belt dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each belt measures 7\/8\" wide and 33-7\/8\" long and uses a 40-series cogged profile.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55167360565591,"sku":"B097DL49ZR","price":55.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-packaging-view.jpg?v=1790384750"},{"product_id":"blackhorse-racing-tr-600hp-snap-in-valve-stems-50pc-1-1-4in-brass-core-high-pressure-100-psi-durability","title":"BLACKHORSE-RACING TR-600HP snap-in valve stems 50pc 1-1\/4in brass-core high-pressure 100 PSI durability","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING 50PCS TR-600HP snap-in valve stems are durable 1-1\/4\" high-pressure replacements built for rims with a 0.453\" valve hole and up to 100 PSI.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplace worn or leaking tire valve stems with a bulk kit engineered for heavy-duty use. These TR-600HP valve stems combine a rubber body with brass cores and stems to resist corrosion and maintain airtight seals. Each stem is factory-tested for leaks so you can reinstall tires with confidence on cars, trucks, trailers, ATVs and more.\u003c\/p\u003e\n\n\u003ch3\u003eWhat makes the TR-600HP valve stems durable enough for heavy use?\u003c\/h3\u003e\n\u003cp\u003eThe TR-600HP stems pair a reinforced rubber exterior with brass internal hardware to resist cracking, corrosion and air loss under pressure. Their materials and manufacturing include leak testing so each piece meets tight tolerances before shipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRubber body resists weathering and wheel motion stress\u003c\/li\u003e\n  \u003cli\u003eBrass stems and cores reduce corrosion compared with plated steel\u003c\/li\u003e\n  \u003cli\u003eBuilt to withstand maximum inflation pressure of 100 PSI\u003c\/li\u003e\n  \u003cli\u003eFactory 100% leak-tested for reliable sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do you install these snap-in valve stems on rims?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with tire removal. After deflating and dismounting the tire, insert the valve stem from the wheel’s inside until it seats; the snap-in design secures it without additional hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDeflate tire fully and remove from rim before inserting stem\u003c\/li\u003e\n  \u003cli\u003ePush the valve stem through the 0.453\" (11.5 mm) valve hole until it snaps into place\u003c\/li\u003e\n  \u003cli\u003eCheck seating and inflate slowly to verify no leaks\u003c\/li\u003e\n  \u003cli\u003eUse with standard caps and tire-pressure monitoring systems (TPMS) where compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and rims are these TR-600HP valve stems compatible with?\u003c\/h3\u003e\n\u003cp\u003eThese snap-in stems fit rims that accept a 0.453\" (11.5 mm) valve hole and are often found on passenger cars, trucks and utility wheels. Their 1-1\/4\" length is suitable for most standard wheel depths encountered on road and off-road vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with cars, heavy-duty trucks and large trailers\u003c\/li\u003e\n  \u003cli\u003eWorks for ATVs, lawn mowers, motorcycles and utility wheels\u003c\/li\u003e\n  \u003cli\u003eRequires a 0.453\" valve hole and 1-1\/4\" stem length for proper fit\u003c\/li\u003e\n  \u003cli\u003eSold as a 50-piece kit—convenient for fleets or multiple-wheel projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain these valve stems to ensure long life?\u003c\/h3\u003e\n\u003cp\u003eRoutine checks and simple care extend their service life: keep caps on, inspect for dry rot or abrasions, and replace stems during tire service when wear or cracking appears. Avoid harsh solvents or prolonged heat exposure to the rubber body.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKeep valve caps in place to block dirt and moisture\u003c\/li\u003e\n  \u003cli\u003eInspect stems during tire rotations or seasonal changes\u003c\/li\u003e\n  \u003cli\u003eReplace any stem showing cracking, flat spots or air loss\u003c\/li\u003e\n  \u003cli\u003eStore unused stems in a cool, dry place away from sunlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: this 50-piece BLACKHORSE-RACING TR-600HP kit is designed for automotive shops, fleet managers, maintenance crews, and DIYers who frequently service wheels. It’s ideal when you need multiple, dependable replacements—whether updating a single vehicle, stocking a garage, or prepping trailers and off-road rigs. If your rims use a 0.453\" valve hole and you require robust, leak-tested snap-in stems with brass hardware, this kit provides a cost-effective, ready-to-install solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these valve stems fit TPMS-equipped wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit rims with a 0.453\" valve hole but verify TPMS sensor clearance; some systems require specific stem types.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these on trailers and ATVs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these TR-600HP stems suit many cars, heavy trucks, trailers, ATVs and lawn equipment using the stated hole size.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55167530336599,"sku":"B09T2SKGJM","price":40.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-packaging-valve-stems.jpg?v=1790388241"},{"product_id":"blackhorse-racing-12-slim-electric-radiator-cooling-fan-kit-12v-800-cfm-2-36-low-profile-universal-mount","title":"BLACKHORSE-RACING 12\" Slim Electric Radiator Cooling Fan Kit — 12V 800 CFM, 2.36\" Low-Profile, Universal Mount","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING's 12-inch slim electric radiator fan kit is a universal 12V puller that delivers up to 800 CFM in a compact 2.36\" profile, complete with mounting brackets and tie straps for straightforward installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis high-performance cooling fan is engineered for tight engine bays where space is limited but airflow is critical. The 10-blade 80W motor provides robust draw-through cooling without adding bulk, making it a practical upgrade or replacement for radiators, intercoolers, A\/C condensers, oil coolers, and transmission coolers. Its corrosion-resistant construction and heat-tolerant materials are chosen for longevity under continuous under-hood exposure.\u003c\/p\u003e\n\n\u003ch3\u003eHow much cooling power does this fan actually provide?\u003c\/h3\u003e\n\u003cp\u003eThe fan is rated to move a maximum of 800 CFM and spins up to approximately 2000 ±10% RPM, driven by a 12V, 80W motor with a current draw of no more than 7.5 amps. That combination gives strong airflow while remaining within typical electrical limits for most vehicles when wired correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum airflow: 800 CFM\u003c\/li\u003e\n  \u003cli\u003eTop speed: ~2000 ±10% RPM\u003c\/li\u003e\n  \u003cli\u003ePower: 12V, 80W; Amp draw ≤ 7.5 A\u003c\/li\u003e\n  \u003cli\u003eOverall diameter: 12.44 inches; thickness: 2.36 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this slim fan fit in cramped engine compartments?\u003c\/h3\u003e\n\u003cp\u003eThe fan’s low-profile 2.36\" thickness is designed to maximize clearance behind the grille and around tight radiators. Its slim form factor reduces interference with other components while still permitting strong pull-through airflow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlim 2.36\" depth for tight-fit installations\u003c\/li\u003e\n  \u003cli\u003eUniversal mounting brackets allow multiple attachment points\u003c\/li\u003e\n  \u003cli\u003eTie straps included for secure fit on varied radiator types\u003c\/li\u003e\n  \u003cli\u003eGood heat and corrosion resistance for under-hood durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and use this fan as a puller for my radiator or intercooler?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes mounting brackets and tie straps; you can orient the fan to pull air through the core by mounting it on the engine side of the radiator. Follow vehicle-specific wiring best practices—use a relay and a temperature switch or a manual switch—so the fan runs only when needed and protects your electrical system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMount as a puller on the engine side for draw-through cooling\u003c\/li\u003e\n  \u003cli\u003eUse a relay and thermostat or manual switch for safe operation\u003c\/li\u003e\n  \u003cli\u003eBrackets and straps provide flexible mounting positions\u003c\/li\u003e\n  \u003cli\u003eReference included instructions or contact customer service for help\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This BLACKHORSE-RACING 12\" slim fan kit is ideal for mechanics, DIY enthusiasts, and fleet owners who need a compact, powerful cooling solution for tight engine bays, upgraded radiators, or auxiliary cooling systems. It suits cars, trucks, performance builds, and retrofit projects where space is limited but reliable airflow is required. If you need help selecting the right fan orientation or wiring setup, the manufacturer provides basic instructions in the main image and customer support for installation questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this fan a pusher or a puller?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It can be mounted as a puller; orient it on the engine side of the radiator to draw air through the core.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What electrical draw should I expect?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The fan runs at 12V, 80W with a maximum amp draw of about 7.5 amps; use a proper relay and fuse.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55167570706775,"sku":"B014KK7Q84","price":64.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-view-12in-fan.jpg?v=1790388873"},{"product_id":"blackhorse-racing-14-slim-12v-radiator-cooling-fan-kit-universal-push-pull-90w-900cfm","title":"BLACKHORSE-RACING 14\" Slim 12V Radiator Cooling Fan Kit — Universal Push\/Pull, 90W 900CFM","description":"\u003cstrong\u003eBLACKHORSE-RACING’s 14\" slim 12V push-pull electric radiator cooling fan kit is a low-profile, reversible 90W assembly designed to boost airflow and clear engine-bay space while fitting a wide range of radiators.\u003c\/strong\u003e\n\nThis slim 14.72\" (14\") fan assembly combines a compact profile with high airflow to help supplemental cooling around radiators, condensers, intercoolers and transmission oil coolers. The kit includes mount brackets and tie straps for flexible installation and uses corrosion-resistant materials and heat-tolerant components to stand up to under-hood conditions. Because the blade and motor are reversible, you can configure the unit as either a pusher or a puller to match your vehicle’s cooling needs.\n\n\u003ch3\u003eHow much airflow and power does this fan deliver?\u003c\/h3\u003e\n\u003cp\u003eThe fan is rated at approximately 900 CFM peak airflow and runs at roughly 2000 RPM with a 10% tolerance, powered by a 12V, 90W motor. Those specifications make it suitable for supplemental cooling on many street and light-duty applications where additional forced airflow is needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated power: 12V, 90W motor\u003c\/li\u003e\n  \u003cli\u003eMaximum airflow: ≈900 CFM\u003c\/li\u003e\n  \u003cli\u003eTypical speed: ~2000 RPM (±10%)\u003c\/li\u003e\n  \u003cli\u003eFan diameter: 14.72\" (nominal 14\")\u003c\/li\u003e\n  \u003cli\u003eOverall thickness: 2.64\" for tight installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my vehicle and radiator setup?\u003c\/h3\u003e\n\u003cp\u003eThe kit is universal and intended to fit most radiators and condenser cores that have space for a 14.7\" diameter fan. Fit depends on the radiator dimensions and available clearance; the slim 2.64\" thickness helps where space is limited but check measurements before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUniversal mounting brackets and tie straps included\u003c\/li\u003e\n  \u003cli\u003eSlim profile to maximize engine-bay clearance\u003c\/li\u003e\n  \u003cli\u003eMeasure radiator core diameter and available depth before purchase\u003c\/li\u003e\n  \u003cli\u003eSuitable for radiators, AC condensers, intercoolers, and oil coolers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use it as a pusher and a puller, and how reliable is it?\u003c\/h3\u003e\n\u003cp\u003eThe fan is reversible by design, allowing installation as either a push or pull unit to match airflow direction requirements. Materials and motor design emphasize heat and corrosion resistance for extended service life when properly mounted and wired.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReversible blade orientation for push or pull operation\u003c\/li\u003e\n  \u003cli\u003eHeat-resistant components for under-hood durability\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finishes on brackets and fasteners\u003c\/li\u003e\n  \u003cli\u003eMounting hardware included for secure attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and are installation instructions provided?\u003c\/h3\u003e\n\u003cp\u003eThe package includes the 14\" fan assembly, mounting brackets, and tie straps needed for most installations. Basic instructions are provided in the main product images for reference; contact customer support if you need additional guidance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e14.72\" fan assembly (approx. 14\" nominal)\u003c\/li\u003e\n  \u003cli\u003eMounting brackets and multiple tie straps for flexibility\u003c\/li\u003e\n  \u003cli\u003eVisual instructions included in product imagery\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for installation questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\nThis BLACKHORSE-RACING 14\" slim fan kit is aimed at DIY mechanics, performance enthusiasts, and technicians who need an efficient, space-saving auxiliary fan for radiators, condensers, intercoolers or oil coolers. It’s useful for vehicles with limited engine-bay depth, retrofits where additional airflow is required, or anyone seeking a reversible pusher\/puller solution that’s easy to mount and built to resist heat and corrosion. Always verify physical clearance and electrical compatibility before installation to ensure the best fit and performance.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this fan reversible for both push and pull setups?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The blade and mounting orientation allow installation as either a pusher or puller to suit airflow direction needs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the slim fan fit in tight engine bays?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Likely—its 2.64\" thickness is designed for limited clearance, but confirm your radiator depth and available space before buying.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55167570837847,"sku":"B014KK7S28","price":67.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-view-assembly.jpg?v=1790388874"},{"product_id":"blackhorse-racing-rv-step-covers-3-pack-18-wide-black-wrap-stair-rugs-with-stainless-steel-springs-17-9-18-for-8-10-deep-ste","title":"BLACKHORSE-RACING RV Step Covers 3-Pack — 18\" Wide Black Wrap Stair Rugs with Stainless-Steel Springs, 17.9×18\" for 8–10\" Deep Ste","description":"\u003cp\u003e\u003cstrong\u003eThese BLACKHORSE-RACING RV step covers are 18\" wide carpeted stair rugs sold in a 3-pack that protect metal steps, reduce dirt tracked inside, and secure to curved or straight RV stairs with paired grommets and spring hooks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you want a simple, durable way to keep your camper entry cleaner and safer, these 17.9\" x 18\" step rugs are made for RVs, trailers and motorhomes. Constructed from 100% polyester with reinforced grommets and stainless-steel springs, the covers wrap around 8–10\" deep steps and can conform to rounded or radius edges. They scrape off grime from shoes, add a soft surface underfoot, and help shield pets and small children from exposed metal edges and hot surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these step rugs stay in place during travel?\u003c\/h3\u003e\n\u003cp\u003eThe covers attach quickly using paired grommets and heavy-duty springs with hooks. Each rug includes two sets of paired grommets so you can choose the best depth setting for your step profile, and the rust-resistant springs hold tension while driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes stainless-steel springs and hooks for secure fastening.\u003c\/li\u003e\n  \u003cli\u003eTwo paired grommet positions accommodate different step depths.\u003c\/li\u003e\n  \u003cli\u003eWrap-style design grips curved or flat step edges without adhesives.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these rugs fit my RV or camper stairs?\u003c\/h3\u003e\n\u003cp\u003eThe rugs measure 17.9\" long by 18\" wide and are intended for 18\" wide steps and 8–10\" deep step treads. Their flexible construction adapts to many rounded or radius stair profiles commonly found on pop-up trailers, motorhomes, and travel trailers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for standard 18\" wide RV steps.\u003c\/li\u003e\n  \u003cli\u003eWorks with 8–10\" deep treads and curved step edges.\u003c\/li\u003e\n  \u003cli\u003eAdjustable grommet spacing for shallow or deeper steps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these covers help keep my RV interior cleaner?\u003c\/h3\u003e\n\u003cp\u003eThe low-pile polyester carpet scrapes and traps dirt, mud, and debris from footwear before you enter. Because the rugs are washable and quick to remove, you can keep the entry area tidy with simple routine cleaning.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePolyester fibers remove surface dirt and grit from shoes.\u003c\/li\u003e\n  \u003cli\u003eMachine-washable or hose-off cleaning for easy maintenance.\u003c\/li\u003e\n  \u003cli\u003eCovers reduce the need to deep-clean interior flooring frequently.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these step covers durable and pet-friendly?\u003c\/h3\u003e\n\u003cp\u003eMade from 100% polyester with reinforced mounting points, the rugs resist wear from foot traffic and the elements. They provide a softer surface for pets and children, protecting paws and toes from sharp metal or hot steps without altering step functionality.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable polyester resists abrasion and retains shape over time.\u003c\/li\u003e\n  \u003cli\u003eReinforced grommets and anti-rust springs prevent failures in travel conditions.\u003c\/li\u003e\n  \u003cli\u003eSoft underfoot surface reduces slipping and protects small feet and paws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These BLACKHORSE-RACING step covers suit RV owners, weekend campers, and pet-loving travelers who want a fast, reversible upgrade to entry steps. They’re ideal if you have standard 18\" wide steps, need protection for curved stair edges, or want a washable, non-permanent solution to cut down on dirt and improve underfoot comfort for family and pets.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these step covers fit rounded RV steps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The wrap-style design and paired grommets accommodate curved or radius steps 8–10\" deep.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I clean the rugs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They’re washable—hose off or machine wash on gentle, then air dry for best results.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55167661375831,"sku":"B09XDMVF7B","price":41.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-step-cover-front-packaging.jpg?v=1790390510"},{"product_id":"blackhorse-racing-rv-step-covers-3-pack-22-wide-wrap-around-camper-stair-rugs-non-slip-washable-black","title":"BLACKHORSE-RACING RV Step Covers 3-Pack — 22\" Wide Wrap-Around Camper Stair Rugs, Non-Slip Washable Black","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING RV Steps Covers Rugs 3 Pack are 22\" wide, washable wrap-around stair carpets with stainless springs that protect stairs, reduce slipping, and keep dirt out of your camper.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you want a simple, removable way to safeguard your RV or camper steps while controlling dirt and wear, these stair rugs are designed to fit most 22\" wide steps and curved treads. Each pack includes three carpet covers sized for common RV stair depths and supplied springs with grommets that fit a variety of step profiles. Constructed from durable polyester and reinforced where it counts, they aim to make entering and exiting your vehicle cleaner and safer without permanent modification.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these step covers attach and stay secure during travel?\u003c\/h3\u003e\n\u003cp\u003eInstallation is tool-free and adjustable: place the rug over the step, align the grommets with the spring hooks, and snap the springs into place. The stainless-steel springs resist rust and are strong enough to hold the cover against wind and movement while driving or cruising campgrounds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour paired grommets per rug for varied depth settings\u003c\/li\u003e\n  \u003cli\u003eStainless anti-rust springs included for reliable fastening\u003c\/li\u003e\n  \u003cli\u003eWraps accommodate curved or radius steps and standard flat treads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these covers fit my RV or camper steps?\u003c\/h3\u003e\n\u003cp\u003eEach rug measures approximately 20\" long by 22\" wide and is intended for 22\" wide stairs; the paired grommets and spring positions allow fitting on steps 8–10\" deep. The wrap design and flexible fabric let them conform to rounded metal treads and nonstandard step shapes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 22\" wide steps\u003c\/li\u003e\n  \u003cli\u003eAdjustable placement for 8–10\" step depths\u003c\/li\u003e\n  \u003cli\u003eWorks with both flat and curved step edges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these rugs help keep the RV interior cleaner?\u003c\/h3\u003e\n\u003cp\u003eThe textured polyester surface scrapes and traps dirt, mud, and grit from shoes and pet paws before they reach your entryway. Because the covers are removable and washable, you can shake out or launder them to maintain a cleaner threshold without replacing carpets or mats inside the RV.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTextured polyester removes debris from soles efficiently\u003c\/li\u003e\n  \u003cli\u003eMachine-washable and quick to dry for easy maintenance\u003c\/li\u003e\n  \u003cli\u003eReplaceable covers prevent dirt transfer into living space\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these covers improve safety on metal or hot steps?\u003c\/h3\u003e\n\u003cp\u003eYes—by adding a non-slip, cushioned layer to metal steps, the covers reduce slipping risk and protect bare feet and pet paws from sharp holes or hot surfaces. The doubled polyester in high-wear zones increases durability where most foot traffic occurs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-slip surface enhances traction in wet conditions\u003c\/li\u003e\n  \u003cli\u003eCushions feet and blocks direct contact with hot metal\u003c\/li\u003e\n  \u003cli\u003eDouble-layer reinforcement at high-impact areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: BLACKHORSE-RACING RV Steps Covers are suited for RV and camper owners who use 22\" wide stairs and want a quick, non-permanent way to reduce dirt transfer, add traction, and protect step surfaces. They work well for families with children or pets, seasonal travelers protecting step finishes, and anyone who prefers washable, replaceable stair protection without drilling or adhesives.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What step size do these covers fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit 22\" wide stairs and accommodate 8–10\" step depths using the adjustable grommet positions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I wash the step rugs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The polyester covers are washable—shake out debris first, then machine wash or hand wash and air dry.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55167735497047,"sku":"B09XDX7NN9","price":61.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-packaging-rv-step-covers.jpg?v=1790392293"},{"product_id":"blackhorse-racing-10-inch-slim-universal-electric-radiator-fan-12v-80w-black-push-pull-800-cfm","title":"BLACKHORSE-RACING 10-inch Slim Universal Electric Radiator Fan 12V 80W Black Push-Pull 800 CFM","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING's 10\" slim 12V 80W push-pull fan is a universal electric radiator cooling solution that delivers up to 800 CFM in a low-profile design and includes a 180°F thermostat kit for automated operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle needs more consistent airflow without sacrificing engine-bay space, this slim 10-inch fan is engineered to mount on a variety of radiators and cooling systems. The dual push-pull configuration moves a high volume of air at a compact thickness so it fits tight installations while helping reduce under-hood temperatures for radiators, oil coolers, intercoolers and transmissions.\u003c\/p\u003e\n\n\u003ch3\u003eHow powerful is the fan and what are the performance specs?\u003c\/h3\u003e\n\u003cp\u003eThe fan uses a 6-blade rotor driven by an 80W motor at 12 volts, producing a maximum of roughly 800 CFM and spinning around 2400 RPM (±10%). It draws no more than 6 amps under typical conditions, making it compatible with common automotive electrical systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlade count: 6 blades for efficient airflow\u003c\/li\u003e\n  \u003cli\u003ePower: 12V, 80W motor\u003c\/li\u003e\n  \u003cli\u003ePeak airflow: up to 800 CFM\u003c\/li\u003e\n  \u003cli\u003eMax speed: approx. 2400 RPM ±10%\u003c\/li\u003e\n  \u003cli\u003eAmp draw: ≤6 A for most installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the thermostat kit include and how does it work?\u003c\/h3\u003e\n\u003cp\u003eThe included thermostat controls fan activation automatically, turning on at 180°F and off at 165°F to maintain stable coolant temperatures. The kit provides a 3\/8\" NPT brass probe and a 1\/2\" NPT adapter so you can install the sensor into existing ports or a custom location on the cooling system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eActivation temp: 180°F (turn-on)\u003c\/li\u003e\n  \u003cli\u003eDeactivation temp: 165°F (turn-off)\u003c\/li\u003e\n  \u003cli\u003eProbe: 3\/8\" NPT brass probe for reliable sensing\u003c\/li\u003e\n  \u003cli\u003eAdapter: 1\/2\" NPT included to fit common ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this slim fan fit my vehicle and how is it mounted?\u003c\/h3\u003e\n\u003cp\u003eThe slim profile (approximately 11.42\" overall diameter and 2.536\" thickness) is designed to clear tight engine bays and stack against radiators where space is limited. It’s a universal-style fan intended to be used as an auxiliary or replacement fan; mounting hardware and relay wiring make it adaptable to many setups, but you should verify radiator size and mounting options before buying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall diameter: 11.42 inches\u003c\/li\u003e\n  \u003cli\u003eThickness: 2.536 inches for tight clearances\u003c\/li\u003e\n  \u003cli\u003eApplication: radiator, A\/C condenser, intercooler, oil\/transmission coolers\u003c\/li\u003e\n  \u003cli\u003eInstallation: relay, switch, thermostat wiring included for standard setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers, DIY mechanics and performance enthusiasts who need extra cooling in cramped engine bays will benefit most from this slim, high-volume fan. It’s particularly useful for vehicles with limited clearance, aftermarket radiators, or added accessory cooling needs such as tow packages, track use, or upgraded A\/C systems. If you want a compact electric fan that combines substantial airflow with automatic thermostat control and corrosion-resistant construction, this BLACKHORSE-RACING unit is built for those upgrades.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the fan run automatically with the thermostat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The thermostat triggers the fan at 180°F and turns it off at 165°F for automatic control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this fan fit tight engine bays?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The slim 2.536-inch thickness and 11.42-inch diameter are made for limited-clearance installations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55168281379159,"sku":"B07DLTHM7Z","price":59.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-view-10-inch-fan.jpg?v=1790398048"},{"product_id":"blackhorse-racing-3-ton-jack-stands-adjustable-11-4-16-8-pair-heavy-duty-steel-wide-saddle","title":"BLACKHORSE-RACING 3 Ton Jack Stands, Adjustable 11.4\"–16.8\" Pair — Heavy-Duty Steel, Wide Saddle","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING 3 Ton jack stands are a pair of heavy-duty, adjustable steel supports that safely hold vehicles from 11.4\" to 16.8\" with a 6,000 lb capacity each.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered for garages, repair shops and home mechanics, these jack stands combine a wide concave saddle, a multi-position ratchet bar and a welded pyramid base to produce a stable lifting support for cars, SUVs, vans and light trucks. Built from cast ductile iron and heavy steel, they prioritize mechanical reliability and easy height adjustment without tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these jack stands secure a vehicle at different heights?\u003c\/h3\u003e\n\u003cp\u003eThe stands use a serrated, multi-position ratchet bar made from cast ductile iron that locks into place for incremental height settings. A forged self-locking ratchet mechanism prevents accidental lowering when weight is applied.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable range: 11.4\" to 16.8\" to accommodate common lift heights.\u003c\/li\u003e\n  \u003cli\u003eSerrated ratchet bar for precise increments and strong engagement.\u003c\/li\u003e\n  \u003cli\u003eSelf-locking action engages automatically when the handle is lowered.\u003c\/li\u003e\n  \u003cli\u003eLarge concave saddle spreads load contact for safer support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features make these stands stable on shop floors?\u003c\/h3\u003e\n\u003cp\u003eThe base is a pyramid-shaped heavy-steel platform, industrially welded to the stand column to resist tipping and distribute load. A broad footprint combined with the wide saddle reduces rocking and maintains alignment under the vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePyramid-style base welded to resist bending and provide a low center of gravity.\u003c\/li\u003e\n  \u003cli\u003eLarge saddle contact area improves grip on pinch welds or axle points.\u003c\/li\u003e\n  \u003cli\u003eThick steel construction resists deformation under rated load.\u003c\/li\u003e\n  \u003cli\u003ePair configuration lets you support both sides of an axle for balanced lifting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these jack stands handle different vehicle types and workshop tasks?\u003c\/h3\u003e\n\u003cp\u003eWith a 3-ton (6,000 lb) rated capacity per stand and a mid-height adjustment range, they suit most passenger cars, sedans, crossovers and many light trucks. Use them for routine maintenance, brake work, tire changes and underbody inspections when paired with a proper jack.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated capacity: 3 tons (6,000 lb) per stand — check vehicle weight distribution before use.\u003c\/li\u003e\n  \u003cli\u003eAdjustable height covers typical service clearances without overextending the ratchet.\u003c\/li\u003e\n  \u003cli\u003eCompatible with common lifting points such as frame rails, differential housings and axle saddles.\u003c\/li\u003e\n  \u003cli\u003eSold as a pair so you can support both sides of the same axle safely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: BLACKHORSE-RACING 3 Ton jack stands are intended for professional mechanics, automotive hobbyists and home DIYers who need reliable, heavy-duty supports for routine repair and maintenance. They suit garages and repair shops that require rugged, easy-to-adjust stands with a broad contact saddle and secure self-locking ratchet. Always use a correctly rated hydraulic jack to lift the vehicle first, confirm stable contact points, and follow all safety practices and manufacturer instructions when positioning and loading the stands.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the load capacity per stand?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each BLACKHORSE-RACING jack stand is rated for 3 tons (6,000 lbs).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I set the height securely?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Raise the ratchet bar to desired height, then lower the handle to engage the self-locking mechanism.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55168309887319,"sku":"B0BY8JQWBN","price":70.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-view-pair.jpg?v=1790399473"},{"product_id":"blackhorse-racing-12v-portable-electric-fuel-transfer-pump-45-l-min-high-flow-self-priming-diesel-kerosene","title":"BLACKHORSE-RACING 12V Portable Electric Fuel Transfer Pump — 45 L\/min High-Flow, Self-Priming (Diesel\/Kerosene)","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING 12V DC Portable Electric Fuel Transfer Extractor Pump is a high-flow, self-priming pump designed to move diesel, biodiesel and kerosene from drums, tanks or vehicles at up to 45 L\/min.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact 12V pump pairs a 175W, 3500 rpm motor with a rotating vane pumping head and built-in bypass to deliver fast, reliable transfers on job sites, in garages, or for farm and fleet use. The unit runs from a vehicle battery or any 12V supply, lifts fluid up to 32 feet, and includes an easy on\/off switch so you can extract and dispense without lifting heavy barrels or risking spills.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will this pump move diesel or oil?\u003c\/h3\u003e\n\u003cp\u003eThe BLACKHORSE-RACING pump moves fluids at a rated maximum of about 45 liters per minute under optimal conditions. Actual flow depends on fluid viscosity, suction lift, hose diameter and battery voltage. It’s built for speed when transferring diesel, biodiesel, or kerosene between containers or into equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum flow: up to 45 L\/min (175W, 3500 rpm motor)\u003c\/li\u003e\n  \u003cli\u003eEffective for low-viscosity diesel and kerosene blends\u003c\/li\u003e\n  \u003cli\u003eFaster than manual siphoning or small garden pumps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use it with my vehicle or portable battery?\u003c\/h3\u003e\n\u003cp\u003eYes — the pump runs from a 12V DC source and connects to car, van, motorcycle or ATV batteries via included 12V connectors. It’s intended for portable on-site transfers where mains power isn’t available. Ensure a secure battery connection and adequate battery charge for consistent flow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12V battery connectors included for direct vehicle hookup\u003c\/li\u003e\n  \u003cli\u003eSuitable for cars, vans, quads, motorcycles and 12V systems\u003c\/li\u003e\n  \u003cli\u003eWorks best with a healthy battery and short cable runs to minimize voltage drop\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and operational features does it include?\u003c\/h3\u003e\n\u003cp\u003eThe pump uses a self-priming rotating vane design plus an inner bypass valve to protect the motor under varying flow conditions. It has a simple on\/off switch for safe operation and is designed only for diesel-type fuels — do not use with gasoline, alcohols, LPG or other low-flashpoint liquids. Follow basic battery and fuel safety practices when operating.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelf-priming rotating vane pump reduces cavitation risk\u003c\/li\u003e\n  \u003cli\u003eInner bypass valve prevents overloads during restricted flow\u003c\/li\u003e\n  \u003cli\u003eOn\/off switch for controlled starts and stops\u003c\/li\u003e\n  \u003cli\u003eNot suitable for gasoline, LPG, alcohol or highly flammable fuels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow far and where can I pump from drums or tanks?\u003c\/h3\u003e\n\u003cp\u003eThis pump can lift liquid up to approximately 32 feet vertically, allowing transfer from deep drums or lower-level tanks without lifting heavy containers. Horizontal hose runs and fittings will affect actual performance, so using appropriate diameter hoses and minimizing bends preserves flow rate. It’s intended for routine diesel transfer tasks rather than continuous industrial pumping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum lift: about 32 feet (vertical suction capability)\u003c\/li\u003e\n  \u003cli\u003eBest results with short, straight hose runs and correct hose diameter\u003c\/li\u003e\n  \u003cli\u003eDesigned for on-site transfer, refueling equipment, and drum draining\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BLACKHORSE-RACING 12V Portable Electric Fuel Transfer Pump is aimed at fleet managers, farmers, mechanics and DIYers who need a rugged, quick way to move diesel, biodiesel or kerosene without heavy lifting or fixed piping. It’s ideal when portability, a 12V power source and a fast flow rate are priorities. Not for use with gasoline or other non-recommended fuels — follow safety guidelines and local regulations when handling and transporting fuel.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this pump safe for gasoline?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Use only diesel, biodiesel and kerosene. The pump is not suitable for gasoline, LPG, alcohols or other low-flashpoint fuels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What power source does the pump need?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A 12V DC supply, typically a vehicle battery. Ensure the battery is charged and connections are secure for best performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55168481329495,"sku":"B07KQZ4DT7","price":78.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-view-pump.jpg?v=1790405144"},{"product_id":"blackhorse-racing-12-universal-electric-radiator-cooling-fan-kit-slim-800-cfm-thermostat-relay","title":"BLACKHORSE-RACING 12\" Universal Electric Radiator Cooling Fan Kit — Slim 800 CFM, Thermostat \u0026 Relay","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING's 12\" universal electric radiator cooling fan kit is a slim, 10-blade 12V unit (80W) that delivers up to 800 CFM and ships with a 180°F thermostat probe, relay, mounting brackets and tie straps for straightforward auxiliary cooling.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit combines a compact high-flow fan with a temperature-activated switch and hardware so you can add extra cooling where the factory setup falls short. The fan measures about 12.44 inches across and 2.36 inches thick, draws under 7.5 amps, and is designed for engine bays that require a low-profile solution. The included 3\/8\" NPT brass probe (with 1\/2\" adapter) turns the fan on at 180°F and off at 165°F, making it suitable for radiators, intercoolers, A\/C condensers, and other auxiliary cooling tasks.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this fan improve cooling on hot drives?\u003c\/h3\u003e\n\u003cp\u003eThe 10-blade design and compact motor push up to 800 cubic feet per minute of airflow, helping dissipate heat faster than many stock cooling setups. Because the fan is electric and thermostatically controlled, it activates only when needed, reducing engine load and electrical draw.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh airflow: maximum 800 CFM to boost heat exchange across cores\u003c\/li\u003e\n  \u003cli\u003eThermostat activation: automatic on at 180°F, off at 165°F\u003c\/li\u003e\n  \u003cli\u003eLow amp draw: ≤7.5 A preserves electrical system capacity\u003c\/li\u003e\n  \u003cli\u003eSlim profile: 2.36\" thickness fits tight engine compartments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit fit my vehicle and how easy is it to install?\u003c\/h3\u003e\n\u003cp\u003eThe fan is sold as a universal 12\" assembly intended to fit a wide range of radiators and cooling applications, but compatibility depends on the radiator opening and available mounting points. The kit includes brackets, tie straps and a relay\/thermostat setup to simplify installation for DIY mechanics and professional installers alike.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUniversal sizing: ~12.44\" diameter fits many radiator cores\u003c\/li\u003e\n  \u003cli\u003eMounting hardware: brackets and straps included for multiple attachment options\u003c\/li\u003e\n  \u003cli\u003eElectrical kit: relay and thermostat probe for temperature-based control\u003c\/li\u003e\n  \u003cli\u003eSimple wiring: instructions provided and customer support available\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the fan's technical limits and durability features?\u003c\/h3\u003e\n\u003cp\u003eBuilt to withstand engine-bay conditions, the fan's materials resist heat and corrosion to extend service life. The motor runs at about 2000 RPM (±10%) and is rated for continuous use within the specified amperage and thermal ranges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMotor speed: ~2000 RPM for consistent airflow\u003c\/li\u003e\n  \u003cli\u003ePower rating: 12V, 80W performance, ≤7.5 amp draw\u003c\/li\u003e\n  \u003cli\u003eThermostat probe: brass 3\/8\" NPT with 1\/2\" adapter included\u003c\/li\u003e\n  \u003cli\u003eConstruction: heat- and corrosion-resistant components for longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this affect vehicle systems like A\/C, transmission, or oil cooling?\u003c\/h3\u003e\n\u003cp\u003eAs an auxiliary cooling device, the fan helps any component that benefits from increased airflow, including A\/C condensers, oil coolers, and transmission coolers. Because it runs only when the thermostat senses elevated temperatures, it avoids continuous operation and limits unnecessary electrical load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eA\/C support: improves condenser cooling under heavy loads or idle\u003c\/li\u003e\n  \u003cli\u003eTransmission and oil systems: aids heat rejection in tight conditions\u003c\/li\u003e\n  \u003cli\u003eIntercooler compatibility: additional airflow where required\u003c\/li\u003e\n  \u003cli\u003eThermostatically managed: runs only as temperatures demand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This BLACKHORSE-RACING kit is aimed at drivers who need extra cooling capacity—owners of older cars with weakened stock fans, vehicles used for towing, high-mileage commuters, track-day or off-road rigs, and anyone fitting aftermarket radiators or intercoolers. It's particularly helpful when space is limited but reliable thermal management is required; installers who want a plug-and-play temperature-controlled solution will also appreciate the included relay, probe and mounting hardware.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What temperature does the thermostat switch use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The brass probe triggers the fan on at 180°F and turns it off at 165°F.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much power does the fan draw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 12V, 80W fan draws up to about 7.5 amps under normal load.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55168539885911,"sku":"B07DLSPDN1","price":68.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-view-fan-assembly.jpg?v=1790407475"},{"product_id":"blackhorse-racing-6-ton-jack-stands-pair-heavy-duty-steel-adjustable-14-6-24-for-cars-light-trucks","title":"BLACKHORSE-RACING 6 Ton Jack Stands Pair — Heavy-Duty Steel, Adjustable 14.6\"–24\" for Cars \u0026 Light Trucks","description":"\u003cp\u003e\u003cstrong\u003eThese BLACKHORSE-RACING 6-ton (12,000 lb) adjustable jack stands are a heavy-duty steel pair designed to securely support cars, SUVs, vans and light trucks at heights between 14.6\" and 24\".\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhether you’re a home mechanic or running a professional garage, reliable support under a lifted vehicle is essential. The BLACKHORSE-RACING jack stands combine a wide concave saddle, a serrated cast-iron ratchet bar, a forged self-locking mechanism and a pyramid-shaped welded base to deliver stable, long-lasting load support rated to 6 tons per stand. They are sold as a pair and intended for use in pairs or sets according to vehicle weight distribution and safe lifting practices.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these jack stands secure a lifted vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe stands use a multi-position ratchet bar with serrations and a forged self-locking design that automatically engages when the handle is lowered. The large concave saddle centers the vehicle contact point while the wide welded base prevents tipping under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelf-locking ratchet rod locks automatically when lowered for hands-free security.\u003c\/li\u003e\n  \u003cli\u003eSerrated cast ductile iron bar provides positive height engagement.\u003c\/li\u003e\n  \u003cli\u003eConcave top saddle improves contact and reduces slippage at the lifting point.\u003c\/li\u003e\n  \u003cli\u003ePyramid-shaped heavy-steel base gives broad footprint stability on shop floors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat weight and height range can these stands handle?\u003c\/h3\u003e\n\u003cp\u003eEach stand carries up to 6 tons (12,000 lbs) and adjusts between 14.6\" and 24\" in height. That range suits most passenger cars, crossovers, light trucks and many service scenarios where higher clearance is needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLoad capacity: 6 tons (12,000 lbs) per stand — follow vehicle lifting guidelines when using multiple stands.\u003c\/li\u003e\n  \u003cli\u003eAdjustment range: 14.6\" minimum to 24\" maximum for flexible work heights.\u003c\/li\u003e\n  \u003cli\u003eMulti-position ratchet makes fine height adjustments quick and repeatable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe are these stands for repeated shop use?\u003c\/h3\u003e\n\u003cp\u003eConstructed from heavy plate steel with industrial welding and a cast ductile iron ratchet bar, the stands are built for repeated service. The design focuses on mechanical locking and a broad contact area to reduce stress concentrations that can cause premature wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy steel structure with industrial welds for long-term durability.\u003c\/li\u003e\n  \u003cli\u003eLarge saddle surface spreads load to protect pinned jacking points.\u003c\/li\u003e\n  \u003cli\u003eForged components minimize deformation under repeated high loads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use these jack stands safely in my garage?\u003c\/h3\u003e\n\u003cp\u003eAlways lift the vehicle with an appropriate jack, then place the stands on firm, level ground at manufacturer-recommended support points. Lower the vehicle slowly onto the saddles, confirm the ratchets are fully engaged, and do not exceed rated capacity per stand.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse stands only on solid, level surfaces; avoid soft ground or ramps without supports.\u003c\/li\u003e\n  \u003cli\u003ePosition stands under manufacturer-approved lifting points on the vehicle frame or pinch welds.\u003c\/li\u003e\n  \u003cli\u003eNever rely on a hydraulic jack alone — always support with rated stands before working underneath.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These BLACKHORSE-RACING jack stands are intended for DIY enthusiasts, independent mechanics and small repair shops that need a rugged, adjustable support solution for routine maintenance and repairs. They suit anyone who lifts passenger cars, SUVs or light trucks and wants a durable, easy-to-adjust pair of stands rated for high-capacity use. As with any lifting equipment, pair these stands with a proper jack, follow vehicle manufacturer lift points and observe safe working procedures.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can one stand support a vehicle alone?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Use stands in pairs or sets and never rely on a single stand for full vehicle support.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these stands rated per stand or combined?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 6-ton (12,000 lb) rating applies to each individual stand; distribute vehicle weight accordingly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55169143112023,"sku":"B0BY8FW75W","price":109.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-view-pair_8d925ebf-fa14-413d-99b1-c60057c5897a.jpg?v=1790419416"},{"product_id":"blackhorse-racing-30-series-cvt-torque-converter-kit-6-driven-3-4-driver-clutches-5-8-shaft-8hp","title":"BLACKHORSE-RACING 30 Series CVT Torque Converter Kit — 6\" Driven + 3\/4\" Driver Clutches, 5\/8\" Shaft, 8HP","description":"\u003cstrong\u003eBLACKHORSE-RACING 30 Series Bore GO Kart CVT Torque Converter Kit is a two-piece clutch set designed to replace Comet\/Manco driver and driven clutches for small engines, delivering reliable power transfer for go-karts, mini bikes, and similar machines.\u003c\/strong\u003e\n\n\u003cp\u003eThis kit pairs a 6-inch asymmetrical driven clutch with a matching driver clutch to restore CVT performance on compact recreational and utility machines. Specifically made to replace common Comet and Manco part numbers, the kit supports small horizontal-shaft engines and provides straightforward mechanical swap-in without complex modification.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly comes in this torque converter kit and what are the key specs?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a 6\" diameter driven clutch and a compatible driver clutch sized for small engines. The driven clutch accepts a 5\/8\" shaft and is rated for up to 8 HP, while the driver clutch has a 3\/4\" bore and fits standard 3\/16\" keyways.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDriven clutch: 6\" diameter, 5\/8\" shaft bore, asymmetrical design, supports up to 8 HP\u003c\/li\u003e\n  \u003cli\u003eDriver clutch: 3\/4\" bore, built to replace Comet 219552 \/ Manco 5957\u003c\/li\u003e\n  \u003cli\u003eDriver keyed for 3\/16\" slot with standard ID hole for easy mount\u003c\/li\u003e\n  \u003cli\u003eCross-compatible with common part numbers: Comet 219457A, 219552; Manco 5957; Yerf Dog Q43201W\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit improve driveability on a go-kart or mini bike?\u003c\/h3\u003e\n\u003cp\u003eBy matching a properly sized driven clutch with a compatible driver, the kit restores correct belt tensioning and engagement characteristics. That means smoother takeoff, more predictable shifting under load, and better acceleration when the vehicle is loaded or climbing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother belt engagement reduces stutter at low RPM\u003c\/li\u003e\n  \u003cli\u003eCorrect pulley diameters improve torque multiplication\u003c\/li\u003e\n  \u003cli\u003eAsymmetrical driven face promotes consistent belt tracking\u003c\/li\u003e\n  \u003cli\u003eReplacement parts restore OEM-style shifting behavior\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this replace my existing Comet or Manco clutch without modifications?\u003c\/h3\u003e\n\u003cp\u003eYes — this kit is engineered as a direct replacement for several Comet and Manco part numbers, so in most setups it installs with standard mounting hardware. Confirm shaft diameter and keyway size before ordering to ensure compatibility with your engine and pulley layout.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replace for Comet 219457A (driven) and Comet 219552 (driver)\u003c\/li\u003e\n  \u003cli\u003eAlternative fit for Manco 5957 and Yerf Dog Q43201W\u003c\/li\u003e\n  \u003cli\u003eCheck: driven 5\/8\" shaft, driver 3\/4\" bore, 3\/16\" keyway\u003c\/li\u003e\n  \u003cli\u003eMay require only existing belts and fasteners — no machining\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and maintenance-friendly is the BLACKHORSE-RACING clutch pair?\u003c\/h3\u003e\n\u003cp\u003eThese clutches are manufactured to handle the wear common to off-road and recreational use while remaining serviceable. Routine checks of belt condition and fastener torque are recommended; replacement life will depend on usage intensity and belt maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSturdy asymmetrical driven face for even wear distribution\u003c\/li\u003e\n  \u003cli\u003ePrecision-bored bores and keyed driver for secure fit\u003c\/li\u003e\n  \u003cli\u003eCompatible with typical belts used on go-karts and mini bikes\u003c\/li\u003e\n  \u003cli\u003eSimple disassembly for inspection or replacement of individual parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This BLACKHORSE-RACING 30 Series Bore kit is aimed at DIY mechanics, go-kart and mini bike owners, rental fleet technicians, and lawn\/garden equipment refurbishers who need a dependable, direct-replacement torque converter set. If your machine uses small horizontal-shaft engines and matches the shaft and bore sizes noted above, this kit gives a cost-effective way to restore drivetrain performance and extend equipment life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What shaft and bore sizes does this kit require?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The driven clutch fits a 5\/8\" shaft; the driver clutch has a 3\/4\" bore and uses a 3\/16\" keyway.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which OEM part numbers does this replace?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It replaces Comet 219457A (driven) and Comet 219552 \/ Manco 5957 (driver), and fits similar models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55169233125719,"sku":"B07N7VBQSV","price":86.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-packed-kit.jpg?v=1790421350"},{"product_id":"blackhorse-racing-go-kart-torque-converter-cvt-clutch-kit-1-shaft-10t-sprocket-6-id-driven","title":"BLACKHORSE-RACING Go Kart Torque Converter CVT Clutch Kit 1\" Shaft — 10T Sprocket, 6\" ID Driven","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING 1\" Go Kart Torque Converter CVT Clutch Kit is a complete replacement clutch and driven assembly designed for 1\" straight crankshafts, compatible with small horizontal-shaft engines producing roughly 8–13 HP.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit is engineered as a direct-fit replacement for several Comet torque converter models and common aftermarket units, delivering a compact CVT-style drive solution for go karts, mini bikes, small tractors, and other light-duty projects. It includes a 10-tooth sprocket for #40\/#41 chain, a 5\/8\" driven clutch with a 6\" inner diameter, and hardware sized for a 1\" shaft. The assembly is compatible with many horizontal-shaft engines including Briggs, Robin, Tecumseh, Honda-style clones, Kohler, Clinton, and Lifan, making it a versatile option when rebuilding or upgrading power transmission on smaller engines.\u003c\/p\u003e\n\n\u003ch3\u003eWill this torque converter fit my engine and go kart?\u003c\/h3\u003e\n\n\u003cp\u003eCheck the crankshaft diameter and engine orientation to confirm fit: this kit is built for a 1\" straight crankshaft on horizontal-shaft engines. It replaces multiple Comet part numbers and several aftermarket drive units, so it's often a direct swap for common go-kart platforms.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eEngine compatibility: Briggs, Robin, Tecumseh, Honda clones, Kohler, Clinton, Lifan\u003c\/li\u003e\n  \u003cli\u003eShaft size: 1\" straight crankshaft required\u003c\/li\u003e\n  \u003cli\u003eSprocket: 10-tooth for #40\/#41 chain included\u003c\/li\u003e\n  \u003cli\u003eReplaces: Comet 218353A, 219552A, 219456A, 217610A, 203814A and others\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this CVT-style clutch affect acceleration and top speed?\u003c\/h3\u003e\n\n\u003cp\u003eThe torque converter uses centrifugal weights and a driven pulley to vary gear ratio under load, offering smooth engagement and automatic change of effective gearing. That helps launch from a stop and keeps the engine in an optimal RPM range as load changes, improving drivability without manual shifting.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSmoother launches than direct drive clutches\u003c\/li\u003e\n  \u003cli\u003eAutomatic ratio change under load for consistent RPMs\u003c\/li\u003e\n  \u003cli\u003eAppropriate for 8–13 HP small engine output\u003c\/li\u003e\n  \u003cli\u003e10-tooth sprocket provides standard chain drive compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and what tools will I need to install it?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit contains the torque converter drive assembly and a driven clutch with a 6\" inner diameter, plus a 10-tooth sprocket for #40\/#41 chain. Typical installation requires basic hand tools and some mechanical familiarity: removing the old clutch, fitting the new drive to the 1\" shaft, aligning chain sprockets, and torquing fasteners to spec.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncluded: drive assembly, 5\/8\" driven clutch (6\" ID), 10-tooth sprocket\u003c\/li\u003e\n  \u003cli\u003eTools: wrenches, socket set, torque wrench, puller (if removing old unit)\u003c\/li\u003e\n  \u003cli\u003eTime estimate: 1–2 hours for experienced DIYers\u003c\/li\u003e\n  \u003cli\u003eRecommended check: chain alignment and belt\/chain tension after first run\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain this torque converter to maximize lifespan?\u003c\/h3\u003e\n\n\u003cp\u003eRegular inspections and preventative maintenance will extend service life. Keep fasteners tight, check the sprocket and chain for wear, and ensure the clutch assembly is free of excessive debris or oil contamination. Replace worn chains and sprockets promptly to avoid uneven loading.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInspect chain and sprocket every 10–20 hours of use\u003c\/li\u003e\n  \u003cli\u003eKeep clutch surfaces clean and dry; avoid oil contamination\u003c\/li\u003e\n  \u003cli\u003eReplace worn components rather than operating with slack or damaged chain\u003c\/li\u003e\n  \u003cli\u003eRe-torque hardware after the first few hours of operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BLACKHORSE-RACING 1\" Go Kart Torque Converter CVT Clutch Kit is aimed at DIY mechanics, hobbyists, and small-vehicle builders who need a reliable replacement for Comet-style torque converters on 1\" straight-shaft horizontal engines. It's a practical upgrade for go karts, mini bikes, project tractors, and other lightweight machines powered by 8–13 HP engines where automatic centrifugal engagement and standard chain drive compatibility are desired. If your vehicle uses a 1\" crankshaft and a #40\/#41 chain drive layout, this kit provides a straightforward, compatible drivetrain solution without complex modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this clutch fit a 1\/2\" or 3\/4\" crankshaft?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This kit is designed for a 1\" straight crankshaft and will not fit 1\/2\" or 3\/4\" shafts without an adapter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which chain size does the included sprocket use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The included sprocket is 10-tooth and sized for #40\/#41 chain compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55170799272279,"sku":"B08SQGNTKD","price":119.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-assembly.jpg?v=1790434417"},{"product_id":"blackhorse-racing-2-5-single-chamber-race-mufflers-pair-7-body-4x9-oval-compact-fit-deep-tone","title":"BLACKHORSE-RACING 2.5\" Single-Chamber Race Silencers Pair — 7\" Body, 4x9 Oval Compact Fit, Deep Tone","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING pair of single-chamber 2.5\" center\/center race mufflers deliver a compact, aggressive deep tone and universal fit for performance applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two 2.5\" center-in\/center-out single-chamber mufflers are built for drivers who want a straight-through, free-flowing exhaust tone and minimal backpressure in a compact package. Each muffler features a 7\" body length, 12\" overall length and a 4\" x 9\" oval outer profile that fits tight spaces while producing the raw, race-inspired sound enthusiasts expect. The universal design makes them adaptable to many custom and replacement installations when welding or clamps are acceptable.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these mufflers change my vehicle’s sound and performance?\u003c\/h3\u003e\n\u003cp\u003eThe single-chamber, straight-through internals prioritize exhaust flow and a pronounced low-end growl typical of race mufflers. You’ll notice a louder, more aggressive exhaust note with reduced restriction compared with many factory silencers, and potential gains in throttle response depending on the rest of the exhaust system setup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDeep, aggressive tone tuned by single-chamber design\u003c\/li\u003e\n  \u003cli\u003eReduced backpressure for freer exhaust flow\u003c\/li\u003e\n  \u003cli\u003eBest sound gains on mid- to high-rev ranges\u003c\/li\u003e\n  \u003cli\u003eWorks well with performance headers and free-flowing downpipes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my car and how do I install them?\u003c\/h3\u003e\n\u003cp\u003eThe mufflers use a center-in \/ center-out 2.50\" inlet and outlet, which is a common size for many aftermarket systems. They are universal parts intended for modification or welding; fitment depends on available space and whether adapters or clamps are used. Check your pipe diameter and routing before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2.50\" inlet and outlet, center-to-center\u003c\/li\u003e\n  \u003cli\u003e7\" body length, 12\" overall length for compact installations\u003c\/li\u003e\n  \u003cli\u003eOval 4\" x 9\" body suits tight underbody clearances\u003c\/li\u003e\n  \u003cli\u003eBest installed by welding or high-quality exhaust clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction details should I expect?\u003c\/h3\u003e\n\u003cp\u003eThese mufflers are constructed for race-oriented durability and simplicity: a straight-through single-chamber core housed in a compact oval shell. The design focuses on flow and sound rather than extensive noise attenuation, so they are built to withstand performance use while remaining lightweight and compact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-chamber straight-through core for minimal restriction\u003c\/li\u003e\n  \u003cli\u003eOval outer shell for space-efficient fitment\u003c\/li\u003e\n  \u003cli\u003eRace-style construction prioritizing sound and flow\u003c\/li\u003e\n  \u003cli\u003eSold as a matched pair for balanced exhaust tone\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you’re a racer, track-day enthusiast, or custom exhaust builder looking for compact, loud, and free-flowing mufflers to add race character to a system, this BLACKHORSE-RACING pair fits the bill. They are particularly well suited for vehicles with 2.5\" piping or custom setups where tight underbody clearance requires a smaller, oval-profile muffler. These are not a direct-fit quiet replacement for stock mufflers — they are meant for drivers wanting aggressive sound and performance-oriented flow in a compact package.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these mufflers a direct bolt-on for my exhaust?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. They are universal and typically require clamps, adapters, or welding for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What exhaust diameter do these mufflers accept?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They use a 2.50\" inlet and 2.50\" outlet (center to center) for 2.5\" piping.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55171335782743,"sku":"B07K48293P","price":111.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-view-pair_61d7da6c-6d4c-4357-96a9-92c042fc8a6a.jpg?v=1790443075"},{"product_id":"blackhorse-racing-performance-race-mufflers-pair-3-center-center-inlet-aluminized-steel-compact-7-body-deep-aggressive-tone","title":"BLACKHORSE-RACING performance race silencers, Pair 3\" centre\/centre inlet — aluminized steel, compact 7\" body, deep aggressive tone","description":"\u003cp\u003e\u003cstrong\u003eThese are a pair of BLACKHORSE-RACING single-chamber performance race mufflers with 3\" center-to-center inlets, built in aluminized steel for a deep, aggressive exhaust tone and track-ready durability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for racers, track-day enthusiasts and anyone upgrading a performance exhaust, this pair of compact single-chamber mufflers balances aggressive sound with robust construction. Each muffler measures approximately 7 inches tall with a 3\" inlet diameter and center\/center orientation, making them a universal fit for many custom and replacement installations. The single-chamber design accentuates low-frequency throat while the directional internal shaping helps channel exhaust flow for better response under load.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these mufflers change my car's exhaust note?\u003c\/h3\u003e\n\u003cp\u003eThe single-chamber architecture emphasizes deeper, throatier tones compared with multi-chamber or straight-through designs. Expect louder, fuller low-end resonance and a pronounced midrange growl under acceleration. They are tuned more for performance sound than noise suppression.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDeep low-frequency emphasis for aggressive exhaust character.\u003c\/li\u003e\n  \u003cli\u003eSingle chamber creates throat swelling and richer midrange.\u003c\/li\u003e\n  \u003cli\u003eDirectional internals shape flow to avoid harsh rasping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and how are they mounted?\u003c\/h3\u003e\n\u003cp\u003eThese mufflers use a universal 3\" inlet (center\/center) which allows them to be welded or clamped into many exhaust systems. Their compact 7\" body makes them suitable for tight rear-end or mid-pipe placements. Professional fitting is recommended for precise alignment and leak-free welds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\" inlet diameter works with standard 3\" exhaust piping.\u003c\/li\u003e\n  \u003cli\u003eCenter-to-center layout suits straight-through pipe runs.\u003c\/li\u003e\n  \u003cli\u003eCompact 7\" body fits limited-clearance installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eConstructed from aluminized steel, these mufflers offer strong corrosion resistance and thermal stability for high-performance use. The finish and welds are built to withstand track conditions better than basic stamped steel alternatives. For extended longevity in harsh climates, consider additional coatings or stainless options where available.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminized steel resists rust and high exhaust temperatures.\u003c\/li\u003e\n  \u003cli\u003eRobust welds designed for performance and competition use.\u003c\/li\u003e\n  \u003cli\u003eIdeal for track and spirited street applications with regular inspection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these affect performance and backpressure?\u003c\/h3\u003e\n\u003cp\u003eThe single-chamber design is intended to maintain freer flow than restrictive resonators while still providing audible feedback. They can reduce backpressure compared with heavily baffled units, helping throttle response in many setups, though effects vary by engine and tuning. Pairing with correctly sized piping and proper tuning yields the best results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypically lowers backpressure relative to multi-baffled mufflers.\u003c\/li\u003e\n  \u003cli\u003eImproves throttle response when combined with matching pipe diameters.\u003c\/li\u003e\n  \u003cli\u003ePerformance gains depend on full exhaust configuration and engine tuning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These BLACKHORSE-RACING mufflers suit track-focused drivers, custom exhaust builders and performance hobbyists wanting a compact, loud, and durable muffler solution. They are not silent replacements for noise-sensitive daily drivers; instead, they fit projects where aggressive sound and robust construction are priorities. If you need universal 3\" center\/center fitment with a deep, racing-style tone and aluminized-steel durability, this pair is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these mufflers universal fit for any 3\" exhaust?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they use a 3\" inlet (center\/center) for universal fitment, but professional welding or clamps are recommended for final installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these mufflers reduce performance or increase backpressure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are designed to maintain freer flow than heavily baffled units and typically reduce backpressure, though results depend on your full exhaust setup.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55171335913815,"sku":"B07BWLVRXR","price":106.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-view-pair_573802f4-67c3-44d7-b290-8ede511bbebf.jpg?v=1790443075"},{"product_id":"blackhorse-racing-rear-tail-light-assembly-for-toyota-camry-2010-2011-pmma-lens-abs-housing","title":"BLACKHORSE-RACING Rear Tail Light Assembly for Toyota Camry 2010-2011 — PMMA Lens, ABS Housing","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING rear tail light brake lamp is a direct-fit replacement for Toyota Camry 2010–2011 models designed to restore rear lighting performance and give the car a sharper look.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis full replacement rear tail lamp assembly is built from durable ABS plastic and PMMA lens material to match OEM fit and finish while resisting impacts, moisture and corrosion. It’s engineered to install using the factory mounting points and connectors so you can replace a damaged or faded lamp without modifying wiring. The unit includes basic electrical protections such as reverse polarity and open-circuit safeguards to reduce the risk of premature failure.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tail light improve my Camry’s appearance?\u003c\/h3\u003e\n\u003cp\u003eReplacing an aged or cracked rear lamp instantly refreshes the vehicle’s rear profile, restoring sharp lines and clear lenses that read better at a distance. The PMMA lens offers a clean, modern look and resists yellowing over time compared with cheaper plastics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClear PMMA lens for crisp light output and less discoloration\u003c\/li\u003e\n  \u003cli\u003eGloss ABS housing that matches factory texture and paint interfaces\u003c\/li\u003e\n  \u003cli\u003eRestores symmetrical rear appearance after damage or wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my 2010–2011 Toyota Camry without wiring changes?\u003c\/h3\u003e\n\u003cp\u003eYes — the lamp is designed as a bolt-in replacement that uses the OEM mounting points and standard connector types for the Camry 2010–2011 years. Typical installations rely on the factory harness and require no cutting or splicing when replacing an original lamp assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit dimensions for 2010–2011 Camry rear quarters\u003c\/li\u003e\n  \u003cli\u003eCompatible plug arrangement for straightforward swap-in\u003c\/li\u003e\n  \u003cli\u003eNo aftermarket adapters needed for most vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant is the assembly?\u003c\/h3\u003e\n\u003cp\u003eThe body uses impact-resistant ABS and a PMMA lens to withstand road debris and UV exposure, while seals and gaskets help keep out dust and moisture. Corrosion-resistant materials are chosen for long-term performance in varied climates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eABS housing resists impacts and cracking\u003c\/li\u003e\n  \u003cli\u003eWaterproof and dust-proof seals to protect internal components\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finishes for extended service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical protections are built into this lamp?\u003c\/h3\u003e\n\u003cp\u003eThe unit includes reverse polarity protection and open-circuit protection features that safeguard the internal lighting elements and reduce risks during installation or if a wiring fault occurs. These measures help prevent immediate failure from common electrical issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReverse polarity protection prevents damage from incorrect connections\u003c\/li\u003e\n  \u003cli\u003eOpen-circuit protection helps avoid electrical shorts and burnout\u003c\/li\u003e\n  \u003cli\u003eNo added electronic interference or audible noise in operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This replacement rear tail light is intended for Toyota Camry owners (2010–2011) who need a direct-fit, long-lasting lamp to replace damaged, faded or non-functional factory units. It’s also a practical choice for restorers and mechanics seeking OEM-style appearance and simple installation without custom wiring. If you want improved rear aesthetics, weather resistance, and built-in basic electrical safeguards in a cost-effective package, this assembly is a suitable match.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this tail light plug-and-play for a 2011 Camry?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s designed for direct fit on 2010–2011 Camry models and uses the factory mounting points and connectors for plug-and-play installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the lamp resist water and road debris?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The assembly features waterproof seals, dust resistance, and an impact-resistant ABS housing for durable road performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55171500245335,"sku":"B0BNCZNYHL","price":86.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-tail-light-front-view.jpg?v=1790447079"},{"product_id":"blackhorse-racing-fender-roller-tool-for-wheel-arch-lip-rolling-blue-heavy-duty-hardened-iron-with-adjustable-arm","title":"BLACKHORSE-RACING Fender Roller Tool for Wheel Arch Lip Rolling — Blue, Heavy-Duty Hardened Iron with Adjustable Arm","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING Fender Roller Tool is a heavy-duty wheel-arch lip reforming tool that bolts to the hub to gradually roll or flare fenders for larger wheels or to repair arch damage.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis professional-grade lip roller is built to give technicians and DIY enthusiasts controlled, repeatable reshaping of wheel arches. Constructed from hardened iron with an adjustable arm and a universal adapter plate, it helps create extra clearance for bigger tires, smooth the fit of aftermarket wheels and fender flares, or correct minor collision deformation. The tool’s design emphasizes gradual pressure and mechanical leverage so metal stretches and reforms without cracking paint or creating sharp creases when used properly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the roller attach to my vehicle so it can reshape the wheel arch?\u003c\/h3\u003e\n\n\u003cp\u003eIt mounts to the hub flange using the included adapter plate, which has elongated bolt slots to fit most 4- and 5-lug hubs. Once secured, the arm swings the roller head against the inner lip, applying uniform pressure as the wheel is turned slowly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBolts to hub flange with elongated holes for versatile fit.\u003c\/li\u003e\n  \u003cli\u003eCompatible with common 4- and 5-bolt hub patterns.\u003c\/li\u003e\n  \u003cli\u003eArm pivots to provide even, progressive pressure.\u003c\/li\u003e\n  \u003cli\u003eDesigned to work while the wheel is rotated for consistent reforming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this tool prevent paint cracking or metal splitting when I roll my arches?\u003c\/h3\u003e\n\n\u003cp\u003eWhen used correctly, the roller applies slow, distributed force to stretch the steel rather than bend it sharply, reducing the risk of paint damage or cracking. Proper technique includes incremental movements, heat if needed (for stubborn metal), and testing progress frequently to avoid overworking the edge.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUse small adjustments and repeat passes rather than large force in one go.\u003c\/li\u003e\n  \u003cli\u003eHeat can be applied cautiously on very stiff metal to improve ductility.\u003c\/li\u003e\n  \u003cli\u003eCheck finish and bend radius often to stop before cracks form.\u003c\/li\u003e\n  \u003cli\u003eRoll gradually to maintain an even flare and preserve paint integrity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features make this a professional tool for body shops and home garages?\u003c\/h3\u003e\n\n\u003cp\u003eThe BLACKHORSE-RACING fender roller combines a hardened iron body, a fully adjustable arm, and a universal mounting plate to deliver reliable, repeatable reshaping. Its construction is aimed at longevity and consistent performance across different vehicle sizes and wheel offsets.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIron construction for strength and durability under repeated use.\u003c\/li\u003e\n  \u003cli\u003eAdjustable arm lets you set push or pull angle and travel distance.\u003c\/li\u003e\n  \u003cli\u003eElongated adapter holes accept multiple hub bolt patterns.\u003c\/li\u003e\n  \u003cli\u003eCompact footprint works on light trucks and automobiles in tight bays.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use it safely and what accessories might I need?\u003c\/h3\u003e\n\n\u003cp\u003eSafety starts with proper mounting, wheel rotation control, and protective measures for paint and hands. Use wheel spacers or test-fit wheels gradually, and have basic shop tools and a torque wrench handy to secure and remove the adapter plate. Protective tape along the fender edge can minimize surface marring during initial passes.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSecurely bolt the adapter plate and torque fasteners to spec before use.\u003c\/li\u003e\n  \u003cli\u003eRotate the wheel slowly—use a helper or vehicle in gear at low RPM.\u003c\/li\u003e\n  \u003cli\u003eMask the paint and keep a heat source ready for very stiff metal.\u003c\/li\u003e\n  \u003cli\u003eInspect progress frequently to avoid over-rolling or creasing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The BLACKHORSE-RACING Fender Roller Tool is aimed at automotive technicians, custom shops, and committed DIYers who fit larger wheels, install fender flares, or repair minor arch damage. It’s suited to users who value a robust, adjustable tool that provides controlled metal reforming for passenger cars and light trucks. If you frequently upgrade wheel sizes, need to correct arch contact, or want a repeatable method to flare arch lips without costly bodywork, this tool offers a practical, long-lasting solution. For any product questions or issues, contact customer support for assistance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 5-lug truck hub?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the adapter plate has elongated holes to fit most 4- and 5-bolt hub patterns.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I roll arches without damaging paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If you work slowly, use protective masking, and check frequently, you can minimize paint damage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55172117266775,"sku":"B07TYXR7BZ","price":105.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-view-mounted.jpg?v=1790450337"},{"product_id":"blackhorse-racing-5-gallon-tire-bead-seater-145-psi-heavy-duty-tank-inflator-with-gauge-for-cars-trucks-atvs","title":"BLACKHORSE-RACING 5 Gallon Tyre Bead Seater - 145 PSI Heavy-Duty Tank Inflator with Gauge for Cars, Trucks, ATVs","description":"\u003cstrong\u003eThe BLACKHORSE-RACING 5 Gallon Air Tire Bead Seater is a heavy-duty 145 PSI tank and blaster tool that delivers a quick burst of compressed air to seat tire beads on vehicles up to 24.5”.\u003c\/strong\u003e\n\n\u003cp\u003eIf you mount tires on cars, trucks, ATVs, tractors or other heavy equipment, seating the bead cleanly and safely is the first step to a reliable tire install. This bead seater uses a 5-gallon vessel and a high-pressure blow-off to force the tire sidewall outward and press the bead against the wheel rim. Built with a pressure gauge and an on\/off valve, it’s designed to fill from a standard shop compressor and deliver consistent shots for faster, more predictable seating than manual methods.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this bead seater speed up tire mounting?\u003c\/h3\u003e\n\u003cp\u003eThe tool stores compressed air in a 5-gallon tank so you don’t need to rely on repeated compressor cycles for each seat attempt. When you open the blow-off, a single powerful pulse inflates the tire sidewall and pushes the bead into position, reducing the time spent adjusting and reseating.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5-gallon tank for multiple shots before refill\u003c\/li\u003e\n  \u003cli\u003eHigh-capacity 145 PSI operating limit for strong seating bursts\u003c\/li\u003e\n  \u003cli\u003eQuick blow-off valve for immediate discharge\u003c\/li\u003e\n  \u003cli\u003eSaves time compared with hand-held compressors or slow inflation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and control features does it include?\u003c\/h3\u003e\n\u003cp\u003eBLACKHORSE-RACING built in a pressure gauge and an on\/off fill valve so you can monitor tank pressure and cut supply when needed. The product is intended to be filled within a recommended operating pressure range and then discharged in short, controlled bursts to minimize risk and ensure consistent performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEasy-to-read gauge shows tank pressure during fill\u003c\/li\u003e\n  \u003cli\u003eOn\/off fill valve prevents overfilling from the compressor\u003c\/li\u003e\n  \u003cli\u003eRecommended fill range of 87–116 PSI for best performance\u003c\/li\u003e\n  \u003cli\u003eSimple manual blow-off control for timed discharge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich tires and rims are compatible with this inflator?\u003c\/h3\u003e\n\u003cp\u003eThis bead seater is sized for most passenger, light-truck and many heavy equipment wheels up to a 24.5\" rim diameter. It’s commonly used for cars, SUVs, pickup trucks, ATVs and tractors, and works with tubeless beads that require a forceful, short burst of air to seat the bead to the rim.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with rims and tires up to 24.5\" diameter\u003c\/li\u003e\n  \u003cli\u003eWorks for tubeless beads on cars, trucks, ATVs and tractors\u003c\/li\u003e\n  \u003cli\u003eNot intended as a replacement for professional mounting when special rims or tire types require it\u003c\/li\u003e\n  \u003cli\u003eBest used with clean rims and proper lubrication on bead seats\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I set it up with a shop compressor?\u003c\/h3\u003e\n\u003cp\u003eConnect the BLACKHORSE-RACING bead seater to a standard shop compressor and fill the tank while watching the included gauge. For reliable seating, fill the tank within the recommended operating pressure range, then move to the wheel and use the blow-off valve to deliver a single, controlled pulse.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse a standard compressor to fill the tank\u003c\/li\u003e\n  \u003cli\u003eMonitor pressure with the built-in gauge while filling\u003c\/li\u003e\n  \u003cli\u003eRecommended operating fill: 87–116 PSI for best results\u003c\/li\u003e\n  \u003cli\u003eDischarge with short bursts until the bead seats properly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BLACKHORSE-RACING 5 Gallon Air Tire Bead Seater is aimed at automotive shops, mobile tire technicians, fleet maintenance teams and experienced DIYers who mount multiple tires and need a dependable, fast way to seat beads. It’s especially useful where repeated seating attempts slow workflow or where compressor recovery time is a concern. It is not a substitute for professional tire mounting when specialized equipment or manufacturer-specific procedures are required.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What PSI should I fill the BLACKHORSE-RACING bead seater to?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fill within the recommended 87–116 PSI range for reliable performance; tank supports up to 145 PSI maximum.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this seat beads on large truck rims?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it works on rims up to 24.5\" diameter, suitable for many cars, trucks, ATVs and tractors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55172713972055,"sku":"B07SRSKJW5","price":147.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-view-tank-and-gauge.jpg?v=1790455451"},{"product_id":"blackhorse-racing-radiator-cooling-fan-assembly-pack-of-2-for-honda-accord-2013-2017-direct-fit-oe-replacement-pull-type-fans","title":"BLACKHORSE-RACING Radiator Cooling Fan Assembly Pack of 2 for Honda Accord 2013–2017 — Direct-Fit OE Replacement, Pull-Type Fans","description":"\u003cp\u003e\u003cstrong\u003eThese two OEM-fit radiator cooling fan assemblies from BLACKHORSE-RACING replace worn units for Honda Accord models 2013–2017, restoring proper airflow to keep engine temperatures in the recommended range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Accord is showing signs of higher-than-normal running temperature or the factory fan has failed, this pack of two replacement assemblies offers a direct-fit, pull-type solution. Each unit is designed to bolt in without modification for EX, EX-L and LX-S submodels and lists compatible OEM part numbers to simplify fitment checks. The set provides both primary and secondary cooling fan replacements so you can service the whole assembly at once.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these fans restore proper cooling performance?\u003c\/h3\u003e\n\u003cp\u003eThese fan assemblies are engineered to pull ambient air through the radiator core, helping dissipate heat generated by the engine and coolant system. Replacing a damaged or non-functional fan returns necessary airflow and stabilizes temperature under idle and driving conditions. They are sold as direct-fit units to match the factory mounting points and electrical connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePull-type fan design for effective radiator airflow\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for OE mounting and connectors\u003c\/li\u003e\n  \u003cli\u003eSold as a pack of two to replace both fans at once\u003c\/li\u003e\n  \u003cli\u003eRestores cooling during idle, low-speed traffic, and highway driving\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these assemblies fit my specific Accord model?\u003c\/h3\u003e\n\u003cp\u003eCompatibility covers Honda Accord model years 2013 through 2017 and explicitly lists Touring 2016 plus submodels EX, EX-L, and LX-S. The product references common OEM replacement numbers to make confirmation quick when cross-checking with parts catalogs or your VIN. If your vehicle uses the listed part numbers, these assemblies are intended to match factory specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Accord 2013–2017, including Touring 2016\u003c\/li\u003e\n  \u003cli\u003eFits EX, EX-L, LX-S submodels without modification\u003c\/li\u003e\n  \u003cli\u003eRefer to OEM numbers: 386155A2A01, 190155A2A01, 190155A2A01-PFM\u003c\/li\u003e\n  \u003cli\u003eAdditional cross-references: HO3113134, HO3115162, 601420, 611420, 620297, 620289\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is the installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eThese units are engineered for a straightforward bolt-on installation that requires no cutting or wiring changes. Basic hand tools—ratchet, sockets, and trim removal tools—are typically sufficient, and the assemblies are designed to align with the factory mounts and plug into the vehicle's existing electrical harness. If you're comfortable with simple automotive maintenance, this is usually a one- to two-hour job for both fans.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-fit replacement; no vehicle modification required\u003c\/li\u003e\n  \u003cli\u003eStandard hand tools needed: ratchet, sockets, pliers\u003c\/li\u003e\n  \u003cli\u003ePlugs into original electrical connectors for a clean install\u003c\/li\u003e\n  \u003cli\u003eSwap both fans at once to ensure balanced cooling performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect in terms of durability and quality?\u003c\/h3\u003e\n\u003cp\u003eThese assemblies are built to match the form and function of the original equipment fan units, with components selected for automotive operating conditions. While individual service life varies by driving environment and maintenance, replacing compromised fans prevents overheating events that can cause more costly engine issues. The pack-of-two format helps ensure both fans age and perform more uniformly after replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed to meet OE fitment and mounting tolerances\u003c\/li\u003e\n  \u003cli\u003eDesigned for everyday driving and stop-and-go traffic\u003c\/li\u003e\n  \u003cli\u003eReplacing both fans reduces load imbalance and vibration\u003c\/li\u003e\n  \u003cli\u003eListed OEM numbers simplify part verification and quality checks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This replacement pack is ideal for Honda Accord owners (2013–2017) and mechanics who need a ready-to-install, OEM-referenced cooling fan pair. Choose this kit if you want a direct-fit, pull-type fan solution for EX, EX-L, LX-S and Touring 2016 models to restore proper radiator airflow and avoid temperature-related drivability issues.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these fans fit my 2015 Honda Accord EX?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This pack fits 2013–2017 Accords including 2015 EX if your vehicle uses the listed OEM part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are any modifications required to install these fans?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No modifications are required; they are direct-fit replacements that plug into the factory harness.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":55172734124375,"sku":"B0BYCZ3Y7F","price":196.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/blackhorse-racing-front-view-assembled-fans.jpg?v=1790455917"}],"url":"https:\/\/britishgarage.co.uk\/collections\/blackhorse-racing.oembed?page=2","provider":"British Garage","version":"1.0","type":"link"}