{"title":"Edelbrock","description":"\u003cp\u003eBrowse 29 Edelbrock products at British Garage, including fuel system parts, car filters and engine parts. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked UK delivery on every order and 30-day returns.\u003c\/p\u003e","products":[{"product_id":"edelbrock-avs2-1906-carburetor-650-cfm-satin-finish-with-electric-choke-improved-throttle-response","title":"Edelbrock AVS2 1906 Carburetor 650 CFM Satin Finish with Electric Choke — Improved Throttle Response","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 1906 AVS2 is a satin-finish 4-barrel carburetor calibrated for 650 CFM street performance and equipped with an electric choke.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis AVS2 unit is a bolt-in replacement or upgrade designed to improve throttle response and cruising drivability for small- and big-block V8 engines that need 650 cubic feet per minute of air-fuel flow. Built around annular-flow primary boosters and updated calibration, the 1906 smooths off-idle transitions and refines fuel metering through the midrange and main circuit. Finished in satin, it pairs with many intake manifolds and includes vacuum fittings for ignition timing advance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the AVS2 1906 improve throttle response?\u003c\/h3\u003e\n\u003cp\u003eThe annular-flow primary boosters use eight evenly spaced orifices to break fuel into a finer spray, reducing flat spots when you move from idle to part throttle. That design plus revised jetting helps the carburetor meter fuel more evenly from the idle circuit into the main circuit for cleaner acceleration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAnnular-flow boosters with eight orifices for better atomization\u003c\/li\u003e\n  \u003cli\u003eNew calibration targeted at off-idle and cruising performance\u003c\/li\u003e\n  \u003cli\u003eSmoother transition from idle to main throttle openings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications and fittings on this model?\u003c\/h3\u003e\n\u003cp\u003eThe 1906 is rated at 650 CFM with a four-barrel layout and electric choke for easier starting. It ships with specific metering jets and rods and offers both timed and full vacuum ports for ignition advance systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e650 CFM maximum flow rating\u003c\/li\u003e\n  \u003cli\u003e.101 primary and .098 secondary metering jets included\u003c\/li\u003e\n  \u003cli\u003e.070 x .037 metering rods and an orange (5\" Hg) step-up spring\u003c\/li\u003e\n  \u003cli\u003eTimed and full vacuum ports for ignition timing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my intake manifold and engine setup?\u003c\/h3\u003e\n\u003cp\u003eThe Edelbrock AVS2 #1906 is compatible with many Edelbrock intake families—Performer, Performer EPS, RPM Air-Gap, Performer RPM and Torker II—as well as similar aftermarket manifolds. If your application requires stud kits, Edelbrock supplies recommended part numbers for correct mounting and spacing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for small- and big-block V8s requiring 650 CFM\u003c\/li\u003e\n  \u003cli\u003eWorks with dual- or single-plane intakes of similar bolt patterns\u003c\/li\u003e\n  \u003cli\u003eUse Carburetor Stud Kits #8008 or #8024 if needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hardware and finish details come with the carburetor?\u003c\/h3\u003e\n\u003cp\u003eFinished in satin to reduce visible glare while providing corrosion resistance for street use, the 1906 includes the electric choke assembly and factory-installed jets, rods, and a step-up spring. Basic installation supplies may still be needed depending on your vehicle's existing hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSatin finish housing and standard Edelbrock hardware\u003c\/li\u003e\n  \u003cli\u003eElectric choke for easier cold starts and driveability\u003c\/li\u003e\n  \u003cli\u003eFactory-installed jets, metering rods, and step-up spring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Edelbrock 1906 AVS2 650 CFM carburetor is aimed at street-driven muscle cars and custom builds where improved off-idle response, smoother cruising, and reliable 650 CFM airflow are desired. It suits owners who prefer a direct-replacement unit with modern annular booster technology and an electric choke for convenience. If you run a small- or big-block V8, use a Performer\/RPM-style intake or a comparable manifold and want straightforward jetting out of the box, this carburetor is a practical upgrade.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSatin Finish\u003c\/li\u003e\n  \u003cli\u003e4 Barrel\u003c\/li\u003e\n  \u003cli\u003eAnnular Booster Type\u003c\/li\u003e\n  \u003cli\u003eElectric Choke Type\u003c\/li\u003e\n  \u003cli\u003e650 CFM Maximum Flow Rating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the 1906 require additional tuning out of the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 1906 ships with factory jets and rods for general street use, but engine differences may require small tuning or jet changes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this carburetor compatible with vacuum advance distributors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The AVS2 #1906 includes both timed and full vacuum ports to work with common vacuum advance systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55161265291607,"sku":"B000ITVUAM","price":589.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-1906-avs2-front-view.jpg?v=1790323444"},{"product_id":"edelbrock-pro-flo-black-round-valve-cover-breather-1-75in-push-in-with-internal-oil-vapor-filter","title":"Edelbrock Pro-Flo Black Round Valve-Cover Breather, 1.75in Push-In with Internal Oil-Vapor Filter","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock EDL4403 Pro-Flo Black Round Breather is a 1 3\/4\" push-in valve cover breather with a built-in oil-vapor filter and textured black finish for a clean under-hood appearance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact Pro-Flo breather from Edelbrock blends functional crankcase ventilation with an OEM-matching aesthetic for engines that use 1 1\/4\" valve cover openings. Its matte black, textured powder-coat complements Edelbrock black valve covers while the internal filter helps reduce oil mist reaching the atmosphere or intake. The unit installs quickly into the valve cover using the supplied grommet and offers an optional angled hose nipple where routing to a catch can or PCV connection is preferred.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this breather improve under-hood appearance and fit?\u003c\/h3\u003e\n\u003cp\u003eThe EDL4403 is designed to look cohesive with Edelbrock black valve covers by using a mini textured powder coat that reduces glare and hides fingerprints. Its rounded cap with embossed Edelbrock script gives a finished look compared with a bare hole or generic cap. Installation is straightforward and intended for standard 1 1\/4\" valve cover openings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlack mini textured powder-coat for consistent visual match\u003c\/li\u003e\n  \u003cli\u003eEmbossed Edelbrock logo on top for branded styling\u003c\/li\u003e\n  \u003cli\u003eFits 1 1\/4\" valve cover hole for common aftermarket and OEM covers\u003c\/li\u003e\n  \u003cli\u003eCompact 1 3\/4\" overall height keeps clearance under hood\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the performance and functionality features of the Pro-Flo breather?\u003c\/h3\u003e\n\u003cp\u003eBeyond looks, this breather contains an internal filtering element that captures oil vapor and helps prevent excessive oil mist from being expelled into the engine bay. It is a passive venting cap intended to allow crankcase gases to escape while retaining heavier droplets, making it suitable for use on naturally aspirated and many forced-induction street setups when used as a vent point.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInternal filter media traps oil vapor and reduces misting\u003c\/li\u003e\n  \u003cli\u003ePush-in tube design ensures a secure, tool-free install\u003c\/li\u003e\n  \u003cli\u003eOptional 90° nipple available for routed hose or catch can hookup\u003c\/li\u003e\n  \u003cli\u003eCompatible with common street and mild performance applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what do I need to know before fitting?\u003c\/h3\u003e\n\u003cp\u003eInstalling the EDL4403 is quick: press the breather into the valve cover opening using the supplied grommet to seat it securely. No permanent modifications are required, and the push-in tube design means removal or replacement can be done without special tools. Verify your valve cover hole measures 1 1\/4\" before purchasing to ensure correct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes installation grommet for a snug, vibration-resistant fit\u003c\/li\u003e\n  \u003cli\u003ePush-in tube eliminates need for drilling or adhesives\u003c\/li\u003e\n  \u003cli\u003eConfirm valve cover hole diameter is 1 1\/4\" before install\u003c\/li\u003e\n  \u003cli\u003e1 3\/4\" overall height for checking hood clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this breather be used with a PCV or catch can setup?\u003c\/h3\u003e\n\u003cp\u003eThe Pro-Flo breather can function as a stand-alone vent or be adapted for routed systems by using its optional 90-degree nipple to connect hose to a catch can or PCV plumbing. When integrating into sealed or pressurized systems, evaluate breathing needs and crankcase pressure to ensure proper ventilation and oil separation for your engine setup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOptional 90° nipple for hose routing to catch can or PCV line\u003c\/li\u003e\n  \u003cli\u003eWorks as an open vent for atmospheric breathing applications\u003c\/li\u003e\n  \u003cli\u003eCheck compatibility with forced-induction or sealed systems before use\u003c\/li\u003e\n  \u003cli\u003eHelps reduce oil mist when used with proper catch can plumbing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Edelbrock EDL4403 Pro-Flo Black Round Breather suits car owners and builders who want a low-profile, branded ventilation cap that matches Edelbrock black valve covers while reducing oil mist. It's ideal for street machines, restorations, and mild performance engines that accept a 1 1\/4\" valve cover opening and prefer a quick, tool-free install with an option to route to a catch can or PCV system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What valve cover hole size does this breather fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits a 1 1\/4\" valve cover hole; confirm your cover diameter before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is a hose nipple included for catch can hookup?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The breather offers an optional 90° nipple for hose routing, provided when that variant is selected.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55163166818647,"sku":"B002Q2M3AU","price":32.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-pro-flo-black-round-breather-front-view.jpg?v=1790341884"},{"product_id":"edelbrock-carburetor-step-up-spring-kit-pack-of-5-color-coded-steel-springs-for-tuning","title":"Edelbrock Carburetor Step-Up Spring Kit, Pack of 5 — Color-Coded Steel Springs for Tuning","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 1464 is a five-spring carburetor step-up spring kit that gives tuners quick, color-coded options to fine-tune transmission or carburetor shift response.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle uses a carburetor or transmission coupling that relies on step-up springs to control throttle or kickdown response, this kit supplies a range of steel springs in distinct strengths so you can dial in performance. Each spring is color-marked for easy identification and made in the United States to Edelbrock specifications. The small, lightweight pack contains one of each resistance commonly used for tuning, so you can test different rates without ordering individual parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these springs change throttle or shift behavior?\u003c\/h3\u003e\n\u003cp\u003eStep-up springs alter the force needed to move a linkage or valve, so swapping to a lighter or heavier spring changes how quickly the mechanism reacts. Using a firmer spring increases resistance and delays or firms the action, while a softer spring makes it respond sooner or with less force. That lets you tune drivability, shift feel, or kickdown timing to match engine output and driver preference.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes five resistance levels for incremental adjustments.\u003c\/li\u003e\n  \u003cli\u003eColor-coding (blue, yellow, orange, pink, plain) speeds selection.\u003c\/li\u003e\n  \u003cli\u003eSteel construction holds shape under repeated use.\u003c\/li\u003e\n  \u003cli\u003eSingle-spring swaps provide measurable, reversible changes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich spring colors and strengths come in the kit?\u003c\/h3\u003e\n\u003cp\u003eThe 1464 kit contains one spring of each standard step-up strength used for tuning: 3 Hg (blue), 4 Hg (yellow), 5 Hg (orange), 7 Hg (pink), and 8 Hg (uncoated\/plain). These cover a useful range from lighter to heavier resistances so you can evaluate small and larger shifts in response. Having the set allows you to move through the scale methodically until you reach the desired behavior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3 Hg (blue) — lightest, quickest response.\u003c\/li\u003e\n  \u003cli\u003e4 Hg (yellow) — slightly stiffer for moderate damping.\u003c\/li\u003e\n  \u003cli\u003e5 Hg (orange) — mid-range balance of speed and control.\u003c\/li\u003e\n  \u003cli\u003e7 Hg (pink) — firmer for delayed or firmer action.\u003c\/li\u003e\n  \u003cli\u003e8 Hg (plain) — strongest for maximum resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install or swap these springs?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone with basic mechanical skills and access to the linkage or carburetor area. Remove the retaining clip or fastener holding the current spring, note its orientation, and replace it with a spring from the kit. Test after each change to verify the effect before finalizing the selection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick, single-spring replacement — no specialty tools required in most cases.\u003c\/li\u003e\n  \u003cli\u003eColor markings eliminate guesswork during swaps.\u003c\/li\u003e\n  \u003cli\u003eSmall package and low weight make it easy to carry as a diagnostic kit.\u003c\/li\u003e\n  \u003cli\u003eSteel springs retain shape for consistent, repeatable adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Edelbrock 1464 step-up spring pack is ideal for mechanics, restorers, and enthusiasts who tune carburetors or transmissions to achieve specific throttle or shift characteristics. If you frequently test different spring rates while dialing in performance or drivability, the plug-and-play kit saves time and reduces parts chasing. It’s also useful as a compact service spare for shops that perform tune-ups and rebuilds on vehicles with mechanical throttle or transmission linkages.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eProduct specifics:\u003c\/em\u003e Fit type is vehicle-specific — verify compatibility before purchase. Package dimensions are compact (approximately 2.54 H x 13.97 L x 3.555 W centimeters) and package weight is about 0.05 pounds. Manufactured in the United States to Edelbrock standards.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these springs compatible with all carburetors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many carburetor and transmission linkages but compatibility is vehicle-specific; check your model and measurements before fitting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use one spring to test performance quickly?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — swap a single spring, test the response, and replace until you find the preferred resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55163368145239,"sku":"B0006HNP5Y","price":31.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-step-up-springs-pack-front_jpg.jpg?v=1790343555"},{"product_id":"edelbrock-carburetor-adapter-for-spread-bore-intakes-2732-steel-with-gaskets-leak-resistant","title":"Edelbrock Carburetor Adapter for Spread-Bore Intakes, 2732 Steel with Gaskets — Leak-Resistant","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 2732 Carburetor Adapter is a steel, open-center adapter that lets you mount a wide range of carburetors to Edelbrock spread-bore intake pads with leak-free, durable construction.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact adapter bridges square-bore carburetors to Edelbrock spread-bore intake manifolds, offering a reliable way to fit a non-matching carburetor without modifying the intake. Built from steel with a natural finish and supplied with installation gaskets, the 2732 focuses on precision assembly and long-term resistance to corrosion. Robotic projection welding and rolled closed tube ends create a consistent, leak-resistant part that keeps the induction tract secure while maintaining simple installation and serviceability.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Edelbrock 2732 ensure a leak-free connection?\u003c\/h3\u003e\n\u003cp\u003eThe 2732 uses rolled-closed tube ends and a monotube internal design to minimize potential leak paths. Together with supplied gaskets, these features deliver a snug seal between the carburetor and intake, reducing chances of air or vacuum leaks that affect engine performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRolled closed tube ends prevent seam leakage at tube terminations.\u003c\/li\u003e\n  \u003cli\u003eMonotube internal layout reduces internal joints and gaps.\u003c\/li\u003e\n  \u003cli\u003eIncluded gaskets provide correct sealing surface and simplify installation.\u003c\/li\u003e\n  \u003cli\u003eRobotic projection welds give consistent, factory-quality joints.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this adapter work with my carburetor and Edelbrock intake?\u003c\/h3\u003e\n\u003cp\u003eYes—this adapter is designed to adapt most square-bore carburetors to Edelbrock spread-bore carb pads. It provides a universal mounting solution, but confirming bolt pattern and flange dimensions before purchase ensures compatibility with your specific carb and intake combination.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits square-bore carbs to Edelbrock spread-bore intake pads.\u003c\/li\u003e\n  \u003cli\u003eSupplied gaskets help match sealing surfaces during installation.\u003c\/li\u003e\n  \u003cli\u003eCheck bolt hole spacing and flange thickness for final fitment confirmation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and manufacturing methods improve durability?\u003c\/h3\u003e\n\u003cp\u003eThe adapter is constructed from steel with a natural finish and uses robotic projection welding to produce repeatable, strong welds. The powder-coated finish on relevant surfaces enhances corrosion resistance, while the monotube design and robust joints maintain structural stability under heat and vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel construction for strength and heat resistance.\u003c\/li\u003e\n  \u003cli\u003eRobotic projection welds for consistent, precise seams.\u003c\/li\u003e\n  \u003cli\u003ePowder-coated areas for additional corrosion protection.\u003c\/li\u003e\n  \u003cli\u003eLarge 46mm piston included for more consistent damping where applicable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what comes in the box?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with carburetor and intake bolt patterns. The adapter ships with the necessary gaskets, and its open-center design keeps the intake path clear to maintain airflow characteristics similar to a direct mount setup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes installation gaskets for immediate fit-up.\u003c\/li\u003e\n  \u003cli\u003eOpen-center profile preserves airflow through the intake tract.\u003c\/li\u003e\n  \u003cli\u003eDesigned for straightforward bolt-on installation—verify hardware and torque specs for your engine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Edelbrock 2732 Carburetor Adapter is aimed at hot-rodders, restorers, and mechanics who need to fit a square-bore carburetor to an Edelbrock spread-bore intake without machining or extensive modification. It suits users seeking consistent factory-level weld quality, improved sealing, and durable construction for street, show, or mild performance applications. If you prioritize a dependable adapter that simplifies carburetor swaps and preserves intake integrity, the 2732 is a practical solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Edelbrock 2732 include gaskets?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the adapter ships with installation gaskets to help create a proper seal during installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it fit any carburetor to an Edelbrock intake?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It adapts most square-bore carbs to Edelbrock spread-bore pads, but verify bolt patterns and flange dimensions for fitment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55163388068183,"sku":"B000630JXY","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-2732-front-view-adapter.jpg?v=1790343826"},{"product_id":"edelbrock-14-round-air-filter-element-5-1-8-mount-triple-chrome-low-profile-3-height","title":"Edelbrock 14\" Round Air Filter Element 5-1\/8\" Mount, Triple Chrome Low-Profile 3\" Height","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 1217 is a 14-inch, 3-inch-tall round air cleaner element finished in triple chrome, designed to fit popular 5-1\/8\" diameter carburetors and match Edelbrock Signature Series valve covers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis classic round air filter element combines a low-profile design with a polished chrome look to give restored and custom engines a tidy, period-correct appearance. Built to align with Performer Series, Holley, Thermo-Quad, Quadra-Jet and Carter AFB carburetors, it pairs function with show-ready styling. The specified height is measured from the gasket flange to the top of the supplied retaining nut for accurate fitment planning.\u003c\/p\u003e\n\n\u003ch3\u003eWill this air cleaner fit my 5-1\/8\" carburetor?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the Edelbrock 1217 is engineered to work with most carburetors that use a 5-1\/8\" mounting diameter. Because the element is vehicle-specific in fit type, confirming the carburetor throat measurement ensures a correct match before purchase.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with Performer Series, Holley, Thermo-Quad, Quadra-Jet and Carter AFB carburetors\u003c\/li\u003e\n  \u003cli\u003eFits carburetors with a 5-1\/8\" mounting bore\u003c\/li\u003e\n  \u003cli\u003eFinal fit depends on clearance above the carburetor and surrounding engine components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the dimensions affect installation and clearance?\u003c\/h3\u003e\n\n\u003cp\u003eThe 1217's dimensions are 14 inches in diameter and 3 inches in height, measured from the gasket flange to the top of the supplied retaining nut. That low-profile height helps when hood clearance is limited but you should measure from the carburetor base to the hood to avoid interference.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e14\" diameter provides broad airflow footprint for street and show engines\u003c\/li\u003e\n  \u003cli\u003e3\" height suits lowered hoods and tight engine bays\u003c\/li\u003e\n  \u003cli\u003eHeight measurement method included for accurate planning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the finish and how does it coordinate with engine components?\u003c\/h3\u003e\n\n\u003cp\u003eThe exterior receives a triple chrome plating that delivers a bright, showroom shine and resists surface corrosion when properly maintained. This finish is specifically intended to complement Edelbrock Signature Series valve covers and other polished engine dress components for a cohesive visual statement.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTriple chrome plated for a mirror-like appearance\u003c\/li\u003e\n  \u003cli\u003eDesigned to visually match Edelbrock Signature Series valve covers\u003c\/li\u003e\n  \u003cli\u003eWipe clean regularly to maintain finish and prevent pitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering this air cleaner?\u003c\/h3\u003e\n\n\u003cp\u003eBefore you buy, verify the carburetor mounting diameter (5-1\/8\"), available hood clearance, and whether a foam or paper element is preferred for your application. Also confirm that the triple-chrome look fits your aesthetic and that you have the correct retaining hardware included or available.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMeasure carburetor throat at 5-1\/8\" for compatibility\u003c\/li\u003e\n  \u003cli\u003eConfirm engine bay and hood clearance for a 3\" height element\u003c\/li\u003e\n  \u003cli\u003eDecide if the polished chrome finish suits your engine build\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Edelbrock 1217 round air filter element is intended for classic car restorers, hot-rodders, and enthusiasts who want a low-profile, chrome-finished cleaner that fits common 5-1\/8\" carburetors. It’s ideal when visual harmony with Edelbrock Signature Series valve covers matters and when limited hood clearance rules out taller aftermarket air cleaners. If you need a vehicle-specific fit that blends show-ready shine with practical dimensions, this Edelbrock element is a strong match.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Edelbrock 1217 fit Holley carburetors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 1217 fits Holley carburetors that use a 5-1\/8\" mounting diameter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How tall is the Edelbrock 1217 air cleaner?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The unit measures 3 inches tall from the gasket flange to the top of the retaining nut.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55165993582935,"sku":"B00062YBU2","price":51.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-round-air-filter-top-view.jpg?v=1790360688"},{"product_id":"edelbrock-accelerator-pump-assembly-kit-1470-performer-avs-replacement-pump-spring-cup-usa-made","title":"Edelbrock Accelerator Pump Assembly Kit 1470 — Performer AVS replacement pump, spring \u0026 cup, USA-made","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 1470 Accelerator Pump Assembly Kit is a complete replacement accelerator pump, spring, and cup designed to restore throttle response and fuel metering on compatible Edelbrock Performer AVS carburetors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re refreshing an older carb or repairing damage from wear, this kit supplies the core pump components needed to re-establish the accelerator shot that helps prevent hesitation during throttle tip-in. It fits a range of Edelbrock carburetor models and is a single, ready-to-install assembly sold individually and manufactured in the USA.\u003c\/p\u003e\n\n\u003ch3\u003eWhich carburetors will this accelerator pump assembly fit?\u003c\/h3\u003e\n\u003cp\u003eThe 1470 assembly is engineered for several Edelbrock AVS and Performer carb models. Confirm model compatibility before ordering to ensure correct fitment and function.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Edelbrock models: #1400, #1403, #1404, #1405, #1406, #1805, #1806, #1825, and #1826\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for Performer AVS series carburetors\u003c\/li\u003e\n  \u003cli\u003eReplaces EPS-style accelerator pump components on these carbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installing this kit affect throttle response?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn pump assembly restores the small initial burst of fuel when the throttle opens, reducing hesitation and improving driveability during quick throttle changes. Results depend on carb tuning and overall engine condition.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides the accelerator shot needed for crisp tip-in\u003c\/li\u003e\n  \u003cli\u003eHelps eliminate bogging or stumble caused by a degraded pump\u003c\/li\u003e\n  \u003cli\u003eWorks with factory-style metering when installed and adjusted correctly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and what should I expect during installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains the pump body, the internal spring, and the pump cup—everything required to replace the worn accelerator pump assembly. Installation is straightforward for someone familiar with carburetor service, but basic mechanical tools and a clean workspace are recommended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete accelerator pump, spring and cup assembly included\u003c\/li\u003e\n  \u003cli\u003eSold individually—order quantity based on number of pumps needed\u003c\/li\u003e\n  \u003cli\u003eBest installed with carburetor removed or with throat access; follow Edelbrock service instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and origin details for this assembly?\u003c\/h3\u003e\n\u003cp\u003eThe components are produced to Edelbrock specifications and intended to match factory fit and function for the listed AVS carburetors. The kit is made in the USA and designed for durability under normal operating conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured to Edelbrock OEM-style standards\u003c\/li\u003e\n  \u003cli\u003eMade in the USA\u003c\/li\u003e\n  \u003cli\u003eSold as an individual pump assembly for targeted repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Edelbrock 1470 Accelerator Pump Assembly Kit is ideal for DIY mechanics, vintage car restorers, and performance enthusiasts maintaining or repairing Performer AVS carburetors. Choose this part when you need a direct-fit, OEM-style replacement to recover throttle response on the compatible Edelbrock models listed above.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Edelbrock 1470 compatible with Performer AVS carburetors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 1470 fits multiple Performer AVS models, including #1400, #1403, #1404, #1405, #1406, and select 1800\/1825 series carbs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include everything needed to replace the accelerator pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit contains the pump assembly, spring, and cup; it’s sold individually and designed for direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55166239899991,"sku":"B00062YA7G","price":38.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-1470-front-assembly.jpg?v=1790365529"},{"product_id":"edelbrock-universal-choke-cable-kit-6-ft-steel-manual-choke-with-polished-knob","title":"Edelbrock Universal Choke Cable Kit — 6 ft Steel Manual Choke with Polished Knob","description":"\u003cstrong\u003eThe Edelbrock 8013 Universal Choke Cable Kit is a 6-foot steel manual choke control with a polished knob and Edelbrock-etched handle designed for universal carburetor mounting.\u003c\/strong\u003e\n\n\u003cp\u003eThis choke cable kit gives you a reliable, durable way to control the carburetor choke linkage from the driver’s position. Built from steel with a polished knob and a 6-foot cable length, the 8013 fits a wide range of hot rods, restored classics, and custom projects where an in-cabin manual choke is preferred. The small, tasteful Edelbrock logo etched into the knob provides a factory-finish appearance without drawing excessive attention.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this choke cable fit different vehicles?\u003c\/h3\u003e\n\u003cp\u003eThe Edelbrock 8013 is offered as a universal kit that adapts to most carburetor setups and firewall configurations. Its 6-foot steel cable provides enough length for traditional engine bays and modified chassis layouts, while the basic mounting hardware supports common firewall and dash mounting approaches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6 ft. steel cable accommodates varied firewall-to-carb distances.\u003c\/li\u003e\n  \u003cli\u003eUniversal end fittings suit most carburetor choke levers.\u003c\/li\u003e\n  \u003cli\u003eMounting hardware included for straightforward installation options.\u003c\/li\u003e\n  \u003cli\u003ePolished knob aesthetics match classic and custom interiors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finish will I see up close?\u003c\/h3\u003e\n\u003cp\u003eThis kit combines corrosion-resistant steel cable construction with a polished knob for a clean, durable look. The knob is capped with the Edelbrock logo etched into the surface to keep detailing subtle yet identifiable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel cable for strength and long service life.\u003c\/li\u003e\n  \u003cli\u003ePolished handle finish resists tarnishing and fits classic styling.\u003c\/li\u003e\n  \u003cli\u003eKnob handle type for positive finger grip and tactile feedback.\u003c\/li\u003e\n  \u003cli\u003eEdelbrock logo etched into the knob for authentic branding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is the installation and everyday use?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward for anyone familiar with carburetor linkages. The manual choke action makes operation intuitive: pull to enrich, push to lean. The included fittings and a 6-foot length minimize the need for cable splicing or special adapters in most cases.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits into standard firewall or dash mounting holes with basic tools.\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play cable length reduces modifications on most vehicles.\u003c\/li\u003e\n  \u003cli\u003eKnob handle provides quick, tactile control while driving or at idle.\u003c\/li\u003e\n  \u003cli\u003eLow-maintenance steel construction keeps operation smooth with periodic lubrication.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect in terms of durability and maintenance?\u003c\/h3\u003e\n\u003cp\u003eThe Edelbrock 8013 is designed for long-term use in street and hobby applications. Steel cable and simple mechanical parts mean fewer failure points versus complex electronic alternatives, but occasional lubrication and inspection will extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel construction resists stretching and provides consistent actuation.\u003c\/li\u003e\n  \u003cli\u003ePolished knob resists wear and maintains visual appeal.\u003c\/li\u003e\n  \u003cli\u003ePeriodic lubrication of the cable and fittings prevents binding.\u003c\/li\u003e\n  \u003cli\u003eInspect end fittings and mounting hardware seasonally for safety.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Edelbrock 8013 Universal Choke Cable Kit is aimed at classic car owners, hot-rod builders, and DIY mechanics who want a dependable manual choke solution with authentic styling cues. If you need a simple, robust choke cable with a polished knob and an Edelbrock-etched finish that fits many carburetor setups, this kit provides a balance of form, function, and ease of installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Edelbrock 8013 compatible with my carburetor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 8013 uses universal end fittings and a 6 ft cable to fit most carburetor choke levers; verify clearance and mounting orientation before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit includes basic mounting hardware for firewall or dash installations to simplify setup.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55167261016407,"sku":"B0052EPBX0","price":43.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-8013-front-view.jpg?v=1790380618"},{"product_id":"edelbrock-chrome-fuel-line-for-square-bore-carburetors-8126-3-8-barbed-single-feed","title":"Edelbrock Chrome Fuel Line for Square‑Bore Carburetors — 8126, 3\/8\" Barbed Single‑Feed","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 8126 Chrome Fuel Line is a single-feed, steel fuel line finished in polished chrome and engineered specifically for Edelbrock square-bore carburetors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis fuel line is a purpose-built plumbing piece for performance carburetion setups that need a neat, reliable inlet between the fuel source and an Edelbrock square‑bore carburetor. It’s made from steel with a bright chrome finish for visual appeal and basic protection against corrosion. Note that it’s a single-feed design with a 3\/8-inch barbed inlet and is incompatible with standard OEM mechanical fuel pumps; it also ships without any fuel filter included.\u003c\/p\u003e\n\n\u003ch3\u003eWhat makes this fuel line suitable for Edelbrock square-bore carburetors?\u003c\/h3\u003e\n\u003cp\u003eThe 8126 is tailored to bolt up cleanly with Edelbrock square-bore carburetor installations so routing and alignment are simplified. Its barbed 3\/8\" inlet matches common braided and rubber fuel hoses used on performance vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for Edelbrock square‑bore carburetors for proper fit and orientation.\u003c\/li\u003e\n  \u003cli\u003e3\/8\" barbed inlet accepts standard performance fuel hose for secure connection.\u003c\/li\u003e\n  \u003cli\u003eSingle-feed plumbing keeps routing straightforward for one-carburetor setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and finish‑friendly is the Edelbrock 8126?\u003c\/h3\u003e\n\u003cp\u003eConstructed from steel, the 8126 balances strength and cost-effectiveness while the chrome plating provides an easy-to-clean surface and an aftermarket look. The finish helps resist light surface corrosion and matches other chrome engine-bay components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel construction offers solid structural integrity under typical under‑hood conditions.\u003c\/li\u003e\n  \u003cli\u003eChrome finish improves appearance and simplifies cleaning of the engine bay.\u003c\/li\u003e\n  \u003cli\u003eAppropriate for show cars and daily drivers where cosmetic presentation matters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fuel line work with my existing fuel pump and filtration?\u003c\/h3\u003e\n\u003cp\u003eThe Edelbrock 8126 is not compatible with many OEM mechanical fuel pumps; it’s intended for setups where a compatible pump and filtration strategy are already chosen. Because it does not include a fuel filter, plan to install an inline filter where required by your engine management or local regulations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNot designed to mate with most OEM mechanical fuel pumps—verify pump outlet size and orientation.\u003c\/li\u003e\n  \u003cli\u003eNo fuel filter included; add an inline filter between the tank and carburetor if needed.\u003c\/li\u003e\n  \u003cli\u003eUse proper hose clamps on the 3\/8\" barb to prevent leaks under pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain the Edelbrock fuel line?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with carburetor plumbing: attach suitable 3\/8\" fuel hose to the barbed inlet, secure with quality clamps, and check for proper clearance to moving parts and heat sources. Periodic inspection for hose integrity and the chrome finish is recommended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall using 3\/8\" fuel hose and worm‑gear or crimp clamps for a leak‑free seal.\u003c\/li\u003e\n  \u003cli\u003eKeep the line away from extreme heat and exhaust routing to reduce wear on hoses.\u003c\/li\u003e\n  \u003cli\u003eInspect clamps and hose every service interval and polish chrome finish as desired.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Edelbrock 8126 Chrome Fuel Line is aimed at enthusiasts and mechanics installing or restoring Edelbrock square‑bore carburetors who want a neat, OEM‑compatible single‑feed inlet with a polished appearance. It suits show vehicles, street rods, and performance builds where proper pump compatibility and an inline fuel filter are part of the planned fuel system. If you require compatibility with an OEM mechanical pump or need a pre‑filtered solution, plan to pair this line with the appropriate pump adapter and inline filter.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Edelbrock 8126 compatible with OEM fuel pumps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The 8126 does not work with many OEM mechanical fuel pumps; verify pump outlet type before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this product include a fuel filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The Edelbrock 8126 ships without a fuel filter; install an inline filter separately if required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55167297356119,"sku":"B0006303ZS","price":45.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-chrome-fuel-line-front.jpg?v=1790382040"},{"product_id":"edelbrock-square-bore-heat-insulator-gasket-for-4-barrel-carburetors-0-320in-nitrile-composite-with-extended-studs","title":"Edelbrock Square-Bore Heat Insulator Gasket for 4‑Barrel Carburetors 0.320in Nitrile Composite with Extended Studs","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 9265 Square-Bore Heat Insulator Gasket is a 4‑barrel, 0.320\" nitrile rubber composite gasket with a divided 2‑hole center and extended studs designed to reduce fuel percolation under high underhood temperatures.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen installed between the carburetor and intake, this insulator gasket creates a thermal barrier that helps protect fuel in Performer Series and Thunder Series AVS carburetors from heat‑related vapor lock and percolation. Built from a resilient nitrile rubber composite, the 9265 combines thickness and engineered center ports to maintain proper fuel flow while offering added spacing and vibration tolerance. The included extended carburetor studs simplify installation where extra clearance is needed for linkage, fuel lines, or aftermarket air cleaners.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this gasket reduce fuel percolation on hot engines?\u003c\/h3\u003e\n\u003cp\u003eThe gasket increases the distance and insulating surface between the intake manifold and the carburetor base, slowing heat transfer into the carburetor body and fuel bowls. Its nitrile rubber composite resists heat soak and seals the mating surfaces to prevent leaks around the throttle body. The divided two‑hole center focuses the spacer effect while preserving fuel delivery geometry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e0.320\" thickness provides measurable thermal separation\u003c\/li\u003e\n  \u003cli\u003eComposite nitrile material resists heat deformation\u003c\/li\u003e\n  \u003cli\u003eTwo‑hole divided center maintains proper flow paths\u003c\/li\u003e\n  \u003cli\u003eSeals mating surfaces to reduce leakage and vapor formation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my Performer Series or Thunder Series AVS carburetor?\u003c\/h3\u003e\n\u003cp\u003eThe Edelbrock 9265 is specifically manufactured for Square‑Bore Performer and Thunder Series AVS 4‑barrel carburetors. Its bolt pattern, center opening layout, and thickness are tailored for those models to ensure correct alignment and function. Verify carburetor model and bore type before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered for Edelbrock Performer \u0026amp; Thunder Series AVS carburetors\u003c\/li\u003e\n  \u003cli\u003e4‑barrel square‑bore compatible mounting pattern\u003c\/li\u003e\n  \u003cli\u003eDesigned to match factory and aftermarket intake interfaces\u003c\/li\u003e\n  \u003cli\u003eCheck carburetor part numbers for exact fitment confirmation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical details and installation conveniences?\u003c\/h3\u003e\n\u003cp\u003eThe gasket measures 0.320 inches thick and is molded from a durable nitrile rubber composite to resist heat and fuel exposure. It features a divided two‑hole center to replicate the stock fuel distribution layout and comes with extended carburetor studs that provide additional clearance for air cleaners and linkage. Installation follows standard carburetor mounting practice—clean the mating surfaces, align the gasket and studs, then torque fasteners to recommended specs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThickness: 0.320\" for enhanced thermal isolation\u003c\/li\u003e\n  \u003cli\u003eMaterial: nitrile rubber composite for fuel and heat resistance\u003c\/li\u003e\n  \u003cli\u003eCenter design: 2‑hole divided opening to maintain flow geometry\u003c\/li\u003e\n  \u003cli\u003eIncludes extended carburetor studs for easier clearance and mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this part affect drivability and maintenance?\u003c\/h3\u003e\n\u003cp\u003eBy reducing heat transfer and fuel percolation, the gasket helps maintain more consistent fuel delivery during high‑temperature operation, which can reduce hesitation or stumble related to vapor formation. It also simplifies future servicing because the extended studs remain in place, making carburetor removal and reinstallation quicker. Routine inspection for compression and signs of degradation is advised as part of normal maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePromotes steady fuel flow under thermal stress\u003c\/li\u003e\n  \u003cli\u003eExtended studs speed removal and reassembly during service\u003c\/li\u003e\n  \u003cli\u003eRegular inspection recommended for wear or hardening over time\u003c\/li\u003e\n  \u003cli\u003eCompatible with common intake sealants if specified by manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Edelbrock 9265 Square‑Bore Heat Insulator Gasket is intended for enthusiasts, restorers, and performance tuners running Edelbrock Performer Series or Thunder Series AVS 4‑barrel carburetors who need extra thermal protection and clearance. It suits vehicles exposed to high underhood temperatures, those fitted with large aftermarket air cleaners or linkage setups requiring additional stud length, and anyone seeking a durable, OEM‑style insulating spacer to help minimize heat‑related fuel issues without altering carburetor calibration.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the 9265 gasket be used on non‑Edelbrock carburetors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s designed for Edelbrock Performer and Thunder AVS square‑bore 4‑barrel carburetors; fitment on other brands may vary—compare bolt pattern and bore layout first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the gasket change carburetor tuning or jetting?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No significant tuning change is expected; the 0.320\" spacer mainly adds thermal separation and clearance without altering fuel metering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55168333250903,"sku":"B00062YBP2","price":50.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-9265-front-view.jpg?v=1790400626"},{"product_id":"edelbrock-pro-flo-1002-low-profile-triangular-chrome-air-cleaner-compact-fit-high-flow-filtration","title":"Edelbrock Pro-Flo 1002 low-profile triangular chrome air cleaner — compact fit, high-flow filtration","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 1002 Pro-Flo is a low-profile, triangular chrome air cleaner designed to improve intake airflow and fit vehicles with limited hood clearance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you need a performance-minded air intake that clears tight hoods without sacrificing filtration or style, the Edelbrock 1002 Pro-Flo answers the call. This compact assembly pairs a raised base with a triangular footprint to maximize filter surface area while keeping overall height low. Constructed with steel components finished in polished chrome, it delivers a durable look that complements classic and modern engine bays alike.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 1002 Pro-Flo fit low-hood applications?\u003c\/h3\u003e\n\u003cp\u003eThe 1002 Pro-Flo is engineered as a low-profile unit so it clears restrictive hood lines and aftermarket scoops. Its triangular design spreads the filter element sideways rather than up, reducing vertical space required above the carburetor or throttle body.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRaised base reduces stack height compared to tall round air cleaners\u003c\/li\u003e\n  \u003cli\u003eTriangular shape increases filter area without added height\u003c\/li\u003e\n  \u003cli\u003eVehicle-specific fit considerations for proper clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this air cleaner maintain airflow and filtration?\u003c\/h3\u003e\n\u003cp\u003eYes — the Pro-Flo balances generous flow capacity with effective particle control to protect the intake system. The mesh-steel top and properly sized filter element promote unrestricted air delivery while helping keep contaminants out of the engine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMesh steel top supports airflow while providing a protective screen\u003c\/li\u003e\n  \u003cli\u003eLarge filter surface area reduces restriction under load\u003c\/li\u003e\n  \u003cli\u003eDesigned to work with common carburetor and throttle body setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finishes are used on this Edelbrock unit?\u003c\/h3\u003e\n\u003cp\u003eThe 1002 Pro-Flo combines steel construction and chrome finishes for durability and aesthetics. The top uses a mesh-steel design for strength, while the base is chromed to resist corrosion and present a polished engine-bay appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel mesh top for structural rigidity and airflow\u003c\/li\u003e\n  \u003cli\u003eChrome-plated steel base for corrosion resistance and shine\u003c\/li\u003e\n  \u003cli\u003eQuality manufacturing origin: Taiwan\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will I know if this fits my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThis model is sold as a vehicle-specific fit type, so confirm compatibility with your carburetor style and hood clearance before buying. Check dimensions and weight to ensure proper installation and mounting stability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage dimensions: 8.89 H x 29.46 L x 25.4 W cm for planning clearance\u003c\/li\u003e\n  \u003cli\u003ePackage weight ~748 grams for handling and shipping expectations\u003c\/li\u003e\n  \u003cli\u003eVerify fit against your manifold\/carburetor and hood profile\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? The Edelbrock 1002 Pro-Flo suits hot-rodders, restorers, and weekend builders who need a performance-capable air cleaner that clears tight hoods and looks polished under the bonnet. It’s ideal when you want improved airflow and reliable filtration without raising the engine’s visual centerline. Choose this unit if you prioritize compact fitment, durable steel construction, and a chrome finish that complements period-correct or custom engine bays.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Edelbrock 1002 Pro-Flo low enough for tight hoods?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Its raised base and triangular layout minimize vertical height for better clearance under restrictive hoods.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What materials are used in the 1002 Pro-Flo?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It uses steel construction with a mesh-steel top and a chrome-plated steel base for durability and appearance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55168382533975,"sku":"B000630I30","price":66.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-1002-front-view-triangular-top.jpg?v=1790402241"},{"product_id":"edelbrock-heat-insulator-gasket-for-4-barrel-avs-carburetors-0-320-thick-with-extended-studs","title":"Edelbrock Heat Insulator Gasket for 4-barrel AVS Carburetors — 0.320\" Thick with Extended Studs","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 9266 Heat Insulator Gasket is a 4‑barrel nitrile rubber composite gasket with 0.320\" thickness and extended studs, engineered to reduce fuel percolation for Performer and Thunder Series AVS carburetors under high underhood heat.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your engine sees high intake temperatures, fuel can begin to percolate inside the carburetor body and cause vapor lock, poor idle, and hard starting. The Edelbrock 9266 is built specifically to interrupt heat transfer between the intake and the carburetor, giving a thermal barrier that helps stabilize fuel behavior without altering jetting or tuning. It ships with extended carburetor studs to simplify installation where additional clearance is needed.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this gasket reduce fuel percolation?\u003c\/h3\u003e\n\u003cp\u003eThe 9266 uses a nitrile rubber composite that resists heat transmission more effectively than thin paper or metal gaskets. By adding a thicker insulating layer and dividing the center passages, it slows the rate at which intake manifold heat reaches the carburetor bowl, lowering the chance of fuel vaporizing prematurely.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e0.320\" thickness provides measurable thermal separation.\u003c\/li\u003e\n  \u003cli\u003eTwo‑hole divided center isolates feed paths and reduces heat conduction.\u003c\/li\u003e\n  \u003cli\u003eNitrile composite resists fuel and oil exposure better than plain fiber.\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for Performer and Thunder AVS carb patterns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my 4‑barrel Performer or Thunder Series AVS carburetor?\u003c\/h3\u003e\n\u003cp\u003eThe 9266 is fabricated for 4‑barrel Performer and Thunder Series AVS carburetors; the bolt pattern and divided center align with those carb designs. Confirm your carburetor is an Edelbrock AVS Performer or Thunder Series 4‑barrel; if so, the gasket’s holes, center division, and thickness match factory dimensions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit for select Edelbrock Performer and Thunder AVS 4‑barrel carbs.\u003c\/li\u003e\n  \u003cli\u003eTwo‑hole divided center matches AVS feed layout.\u003c\/li\u003e\n  \u003cli\u003eExtended studs included to clear spacers or high‑rise intakes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what hardware is included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with carburetor removal and reinstallation: remove the carb, clean mating surfaces, install the gasket, and hand‑tighten then torque the carb studs to spec. Edelbrock includes extended carburetor studs so you won’t need to source additional hardware if you’re running spacers or a thicker intake setup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes with extended carburetor studs for extra clearance.\u003c\/li\u003e\n  \u003cli\u003eInstall using standard carburetor torque sequence and specs.\u003c\/li\u003e\n  \u003cli\u003eWorks with common spacer thicknesses and aftermarket intakes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and dimensions should I know before buying?\u003c\/h3\u003e\n\u003cp\u003eThe gasket is molded from a nitrile rubber composite chosen for fuel resistance and thermal insulating properties. Key dimensions and features include the 0.320\" overall thickness, a 2‑hole divided center to match AVS feed patterns, and a 4‑barrel layout for full‑size carburetors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNitrile rubber composite construction for durability and fuel resistance.\u003c\/li\u003e\n  \u003cli\u003e0.320\" thickness for effective heat isolation.\u003c\/li\u003e\n  \u003cli\u003e4‑barrel configuration with 2‑hole divided center section.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Edelbrock 9266 is ideal for street and performance vehicle owners using Edelbrock Performer or Thunder Series AVS 4‑barrel carburetors who experience heat‑related fuel issues or who run spacers\/high‑rise intakes that require added stud length. If you want a direct, dependable thermal barrier that bolts on with included extended studs and keeps fuel behavior stable in hot underhood conditions, this gasket is a practical upgrade.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Edelbrock 9266 fit all Edelbrock 4‑barrel carburetors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s designed for Performer and Thunder Series AVS 4‑barrel carburetors; verify your carb is an AVS Performer or Thunder model before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the extended studs prevent clearance issues with spacers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the included extended carburetor studs provide extra thread length for common spacers and thicker intake setups.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55168383910231,"sku":"B00062YBPM","price":49.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-9266-front-gasket-and-studs.jpg?v=1790402300"},{"product_id":"edelbrock-2696-square-bore-to-spread-bore-carburetor-adapter-one-size-machined-aluminum-with-gaskets-hardware","title":"Edelbrock 2696 Square‑Bore to Spread‑Bore Carburetor Adapter — One Size, Machined Aluminium with Gaskets \u0026 Hardware","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 2696 adapter converts four-hole square‑bore carburetors to fit spread‑bore manifolds, letting you mount square‑bore Edelbrock carbs to Quadra Jet and Thermo‑Quad intakes without replacing the intake or carburetor.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact aluminum adapter provides a dependable mechanical bridge between different carburetor and intake styles so you can swap components during engine upgrades or restorations. Machined from aluminum with a natural finish, the plate reproduces the OEM footprint while offering individual venturi ports for each cylinder, and it ships with gaskets and hardware to streamline installation. The adapter is a practical, cost‑effective alternative to sourcing matching carburetors or custom manifolds when changing engines or tuning performance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter help when I’m changing carburetors or intakes?\u003c\/h3\u003e\n\u003cp\u003eThe 2696 acts as an interface that preserves the original manifold while accepting a square‑bore Edelbrock carburetor. Instead of replacing the intake or buying a new carburetor that matches the intake bolt pattern, you use this adapter to marry the two components quickly and reliably.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces factory adapter plate dimensions to fit stock Quadra Jet and Thermo‑Quad manifolds\u003c\/li\u003e\n  \u003cli\u003eEnables mounting of Edelbrock four‑hole square‑bore carburetors on spread‑bore intakes\u003c\/li\u003e\n  \u003cli\u003eSaves cost compared with purchasing a new intake or matching carburetor\u003c\/li\u003e\n  \u003cli\u003eIncludes gaskets and hardware for a complete install package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and materials?\u003c\/h3\u003e\n\u003cp\u003eManufactured from aluminum, the adapter offers a lightweight yet rigid connection that resists corrosion and warping under normal operating conditions. The natural machined finish provides a true flat surface for sealing and a durable mounting interface that mirrors OE geometry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction: machined aluminum for strength and heat resistance\u003c\/li\u003e\n  \u003cli\u003eThickness: 0.850 inches for proper spacing and sealing\u003c\/li\u003e\n  \u003cli\u003eFinish: natural aluminum that resists corrosion and matches aftermarket components\u003c\/li\u003e\n  \u003cli\u003eDesign: individual venturi ports to align with cylinder runners\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what’s included in the kit?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic intake and carburetor work. The adapter is vehicle‑specific by fit type but installs in place of the original adapter plate; included hardware and gaskets reduce the need for separate parts purchases.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHardware and gaskets included to simplify the swap\u003c\/li\u003e\n  \u003cli\u003eFits existing intake and carburetor bolt patterns—check vehicle compatibility\u003c\/li\u003e\n  \u003cli\u003eRequires standard hand tools and basic tuning after mechanical fitment\u003c\/li\u003e\n  \u003cli\u003eIndividual venturi ports make alignment with manifold runners easier\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this change drivability or require tuning?\u003c\/h3\u003e\n\u003cp\u003eMechanically, the adapter only repositions the carburetor; any drivability changes will come from the carburetor choice, jetting, and ignition settings rather than the adapter itself. After installation, expect to verify idle, mixture and timing to ensure optimal performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdapter does not alter carburetor calibration—tune the carb as needed\u003c\/li\u003e\n  \u003cli\u003eVerify idle and mixture after installation for smooth operation\u003c\/li\u003e\n  \u003cli\u003eMay require minor jetting or linkage adjustments depending on carburetor model\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Edelbrock 2696 adapter is for enthusiasts, restorers, and mechanics who want to combine Edelbrock four‑hole square‑bore carburetors with stock Quadra Jet or Thermo‑Quad manifolds. It’s ideal when preserving the original intake is important, when swapping carburetors during performance builds, or when minimizing parts purchases during restorations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the adapter include gaskets and hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the Edelbrock 2696 ships with the necessary gaskets and mounting hardware for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which manifolds will this adapter fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is designed to mount Edelbrock square‑bore carburetors to stock Quadra Jet and Thermo‑Quad manifolds.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55168386662743,"sku":"B00062YACG","price":52.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-adapter-front-face.jpg?v=1790402414"},{"product_id":"edelbrock-pro-flo-10-inch-round-air-cleaner-chrome-low-profile-3-5-height-replaceable-paper-element","title":"Edelbrock Pro-Flo 10-Inch Round Air Cleaner — Chrome low-profile 3.5\" height, replaceable paper element","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 1208 Pro-Flo is a low-profile, 10-inch chrome-plated round air cleaner designed to deliver clean intake air while clearing tight hood spaces and matching Edelbrock Signature Series styling.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt from durable 18-gauge steel and finished in a triple chrome plating, the Pro-Flo 10-Inch Round Air Cleaner adds classic appearance and practical clearance for street rods and restored classics. Its compact overall height and replaceable paper element make it a popular choice when engine bay room is limited but filtration and show-quality looks are still a priority. This description explains fit, design details, installation considerations, and who benefits most from this model.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Edelbrock Pro-Flo fit my carburetor and tight hood clearance?\u003c\/h3\u003e\n\u003cp\u003eThe 1208 is engineered for broad compatibility and low profile installation. It fits carburetors that accept a 5 1\/8-inch air cleaner mount flange and keeps overall height to a minimum so it can clear many low hoods and scoops.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10-inch diameter base designed for standard 5 1\/8-inch mount flanges\u003c\/li\u003e\n  \u003cli\u003e2-inch tall replaceable paper element with 3.5-inch total assembly height\u003c\/li\u003e\n  \u003cli\u003eLow-profile design reduces interference with low-clearance hoods\u003c\/li\u003e\n  \u003cli\u003eBase includes knockout hole for crankcase ventilation adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finish protect the air cleaner and enhance appearance?\u003c\/h3\u003e\n\u003cp\u003eThis Edelbrock air cleaner is stamped from 18-gauge steel for structural strength and durability. The visible surfaces are finished with a triple chrome plating that offers a high-gloss, show-ready look that coordinates with Edelbrock valve covers and other polished engine components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e18-gauge steel construction resists bending and warping\u003c\/li\u003e\n  \u003cli\u003eTriple chrome plating provides shine and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eStamped Edelbrock logo is integrated into the lid for a factory appearance\u003c\/li\u003e\n  \u003cli\u003eReplaceable paper element keeps service costs low\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I vent or connect crankcase ventilation with this model?\u003c\/h3\u003e\n\u003cp\u003eYes — the base of the Pro-Flo 1208 includes a knockout hole to accept a crankcase ventilation adapter if you need to route PCV or breathers into the intake tract. That makes it convenient for emissions-checked restorations or custom routing when desired.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in knockout for optional ventilation fitting\u003c\/li\u003e\n  \u003cli\u003eAllows use of crankcase adapters without modification to the lid\u003c\/li\u003e\n  \u003cli\u003eSimplifies PCV\/breather hose connection for closed systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Edelbrock 1208 Pro-Flo 10-Inch Round Air Cleaner is ideal for builders and restorers who want a polished, low-profile intake look without sacrificing serviceability. If you run a carbureted small-block or similar application that accepts a standard 5 1\/8-inch mount flange and you need reduced height to clear a low hood, this unit is tailored for that purpose. It also suits anyone matching Edelbrock Signature Series valve covers or seeking a durable, chrome-finished component with a replaceable paper element for routine maintenance. While it offers attractive styling, installation compatibility and ventilation options, be sure to confirm wheelhouse and hood clearances and carburetor flange diameter before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this air cleaner fit my carburetor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits carburetors with a 5 1\/8-inch diameter mount flange; confirm your carburetor's flange size before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it allow crankcase ventilation hookup?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the base includes a knockout hole for a crankcase ventilation adapter for PCV or breather hose connection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55168418840919,"sku":"B000630IBC","price":72.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-pro-flo-1208-front-top-view.jpg?v=1790403435"},{"product_id":"edelbrock-10-pro-flo-round-air-cleaner-satin-black-2-paper-element-fits-5-1-8-carburetors","title":"Edelbrock 10\" Pro-Flo Round Air Cleaner, Satin Black 2\" Paper Element — Fits 5-1\/8\" Carburetors","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 1203 Pro-Flo Black is a 10\" round aluminum air cleaner with a 2\" replaceable paper element designed to fit 5-1\/8\" carburetors and provide dependable filtration and a sleek satin-black appearance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for classic and performance engines, the 1203 Pro-Flo combines durable aluminum construction with a satin-black finish and a white Edelbrock logo for a clean, factory-inspired look. It is compatible with many popular carburetors — including Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra-Jet, and Carter AFB — and includes a knock-out provision in the base for crankcase breather connections. Heights are measured from the gasket flange to the supplied retaining nut, and all dimensions are accurate within 1\/8\".\u003c\/p\u003e\n\n\u003ch3\u003eWhich carburetors will this 10\" air cleaner fit?\u003c\/h3\u003e\n\u003cp\u003eThis model is sized for carburetors with a 5-1\/8\" mounting diameter. It fits a wide range of factory and aftermarket carbs commonly used on V8 and small-block engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Performer Series and Thunder Series AVS carburetors.\u003c\/li\u003e\n  \u003cli\u003eWorks with Holley, Thermo-Quad, Quadra-Jet, and Carter AFB designs.\u003c\/li\u003e\n  \u003cli\u003eAlso fits Edelbrock carburetors referenced by models #1208, #1209 and #1221.\u003c\/li\u003e\n  \u003cli\u003eIdeal for restorations and street-performance applications that use standard 5-1\/8\" intake openings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the 2\" paper element perform and how is it serviced?\u003c\/h3\u003e\n\u003cp\u003eThe replaceable 2\" paper element provides straightforward filtration and simple maintenance. When dirty, you remove the retaining nut and replace the cartridge with a new paper element to restore airflow and protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2\" element height for compact profile and easy access.\u003c\/li\u003e\n  \u003cli\u003ePaper media balances airflow and particulate capture for street use.\u003c\/li\u003e\n  \u003cli\u003eField-serviceable replacement element — no special tools required beyond the retaining nut.\u003c\/li\u003e\n  \u003cli\u003eReplacement elements are commonly available from Edelbrock and aftermarket suppliers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes the air cleaner allow crankcase ventilation or breather hookup?\u003c\/h3\u003e\n\u003cp\u003eYes — the base includes a knock-out provision to accept a crankcase breather connection. This makes it possible to route PCV or breather plumbing into the air cleaner base when a sealed breather is needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBase knock-out allows installation of crankcase ventilation adapter #1205 (sold separately).\u003c\/li\u003e\n  \u003cli\u003eSupports both open-breather and routed-breather setups depending on engine requirements.\u003c\/li\u003e\n  \u003cli\u003eSimplifies tidy engine-bay plumbing and helps control oil vapor entry point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the materials, finish, and physical dimensions?\u003c\/h3\u003e\n\u003cp\u003eConstructed from aluminum, the housing is finished in satin black and features the Edelbrock logo in white for a durable, low-reflective look. The overall diameter is 10\", with a compact overall height suitable for tight engine bays.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10\" outer diameter with a 3.5\" overall height (measured from gasket flange to top of retaining nut).\u003c\/li\u003e\n  \u003cli\u003eAluminum housing for corrosion resistance and light weight.\u003c\/li\u003e\n  \u003cli\u003eSatin-black finish for a clean appearance that matches many engine themes.\u003c\/li\u003e\n  \u003cli\u003eDimensions accurate within 1\/8\"—fitment should be verified on custom or modified intakes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Edelbrock 1203 Pro-Flo Black is a practical choice for enthusiasts restoring older vehicles, building streetable performance engines, or anyone needing a compact, attractive air cleaner that fits 5-1\/8\" carburetors. It suits owners who want a balance of simple maintenance, reliable filtration, and a satin-black aesthetic without adding unnecessary height to the engine bay. If you run common performance or OEM-style carburetors and want an OEM-friendly look with a replaceable paper element and breather provision, this Edelbrock air cleaner is a solid match.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my Holley carburetor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 1203 fits carburetors with a 5-1\/8\" mounting diameter, including many Holley models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the air cleaner compatible with crankcase breather plumbing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The base has a knock-out for a breather adapter (adapter #1205 sold separately).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55168426148183,"sku":"B002Q28WH8","price":72.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-1203-front-packaging.jpg?v=1790403633"},{"product_id":"edelbrock-carburetor-rebuild-kit-1477-for-square-bore-performer-complete-gasket-seal-set-us-made","title":"Edelbrock Carburetor Rebuild Kit 1477 for Square‑Bore Performer – Complete Gasket \u0026 Seal Set, US‑Made","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 1477 Carburetor Rebuild \u0026amp; Maintenance Kit contains every gasket, seal, and small component needed to restore or modify Edelbrock square‑bore Performer carburetors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Edelbrock square‑bore carb is leaking, running rough, or simply due for preventive service, this rebuild kit provides the OEM‑style parts to return the unit to reliable operation. The kit is purpose‑built for Edelbrock Performer models and supplies high‑quality replacement components produced in the United States. It’s compact and lightweight, shipped in a small package ideal for home mechanics and professional shops alike.\u003c\/p\u003e\n\n\u003ch3\u003eWhat parts are included and will it cover a complete rebuild?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit is designed to include all routine rebuild items: gaskets, seals, O‑rings, and other small hardware required to overhaul an Edelbrock square‑bore carburetor. It supports both repair and minor modification tasks so you can refresh the carburetor’s sealing surfaces and replace age‑worn rubber components.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eComplete gasket set for top and base plates\u003c\/li\u003e\n  \u003cli\u003eO‑rings and cone seals for fuel passages and bowls\u003c\/li\u003e\n  \u003cli\u003eSmall hardware pieces for linkage and mounting\u003c\/li\u003e\n  \u003cli\u003eParts matched to Edelbrock Performer square‑bore specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install this kit for a DIY mechanic?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for anyone comfortable disassembling a carburetor and following a service manual or step‑by‑step guide. Because the kit contains the common wear items, you won’t need to hunt for spare seals mid‑job. For first‑timers, documenting parts orientation during disassembly helps ensure proper reassembly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAll small replacement parts included to avoid extra trips\u003c\/li\u003e\n  \u003cli\u003eCompact package dimensions: 5.08 H x 18.288 L x 16.002 W cm\u003c\/li\u003e\n  \u003cli\u003eLightweight: approximately 0.200 pounds in shipping weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit fit my carburetor model and maintain aftermarket changes?\u003c\/h3\u003e\n\n\u003cp\u003eThis 1477 kit is intended for Edelbrock square‑bore Performer series carburetors and is compatible with the common variations used in street and mild performance applications. It replaces factory wear items and is suitable for reusing or retaining performance jets and metering parts you may have previously installed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSpecifically for Edelbrock square‑bore Performer carburetors\u003c\/li\u003e\n  \u003cli\u003eSupports both stock rebuilds and continued use of upgraded components\u003c\/li\u003e\n  \u003cli\u003eManufactured in the United States to Edelbrock tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does using this genuine rebuild kit help long‑term maintenance?\u003c\/h3\u003e\n\n\u003cp\u003eReplacing all consumable sealing and rubber parts during a rebuild restores predictable fuel and vacuum circuits while reducing the chance of leaks and drivability issues. Using parts that match the original design also simplifies future maintenance and helps maintain consistent performance over time.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRenews sealing surfaces for stable fuel metering\u003c\/li\u003e\n  \u003cli\u003eMinimizes repeat disassembly by addressing common failure points\u003c\/li\u003e\n  \u003cli\u003eOEM‑matched parts simplify diagnostics and tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Edelbrock 1477 kit is aimed at car owners, restorers, and mechanics who work on Edelbrock square‑bore Performer carburetors and want a single‑source, OEM‑quality collection of replacement gaskets and seals. It’s useful for routine maintenance, troubleshooting drivability problems, and preparing a carburetor for reinstallation after cleaning or modification. Whether you’re a home enthusiast performing a weekend rebuild or a professional shop servicing multiple vehicles, this kit provides the core parts needed to get the carburetor back to reliable operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Edelbrock 1477 kit compatible with all square‑bore Performer carburetors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it is designed for Edelbrock square‑bore Performer series carburetors and covers the common variants used in street and mild performance setups.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include jets and floats?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the kit contains gaskets, seals, O‑rings, and small hardware but typically does not include jets or float assemblies.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55169027539287,"sku":"B00062YSJG","price":68.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-1477-product-layout.jpg?v=1790417095"},{"product_id":"edelbrock-performer-series-carburetor-calibration-kit-1487-metering-rods-jets-springs-for-1406-tuning","title":"Edelbrock Performer Series Carburetor Calibration Kit 1487 — metering rods, jets \u0026 springs for #1406 tuning","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 1487 Performer Series Carburetor Calibration Kit is a complete set of metering rods, jets, springs and hardware designed to fine-tune Performer carburetors for optimal throttle response and fuel metering.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your engine is fitted with an Edelbrock Performer Series carburetor and you want to dial in fueling across different loads and conditions, this calibration kit supplies the commonly needed parts to do it. The kit is assembled for compatibility with part #1406 and provides a range of metering rods, jets, step-up springs and retaining hardware so you can test combinations and achieve smoother operation, better throttle transitions, and more consistent performance.\u003c\/p\u003e\n\n\u003ch3\u003eWhat parts are included in the 1487 calibration kit?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit groups the essential metering components and related springs into one assortment so you have options during tuning sessions. Parts are organized for immediate use and to match common service needs for Performer models.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMultiple metering rods covering different tapers for rich-to-lean adjustments.\u003c\/li\u003e\n  \u003cli\u003eA selection of main and idle jets to change base fuel flow.\u003c\/li\u003e\n  \u003cli\u003eStep-up springs for controlling circuit engagement and transition strength.\u003c\/li\u003e\n  \u003cli\u003ePair of metering rod retaining springs and miscellaneous mounting hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will these components affect drivability and throttle response?\u003c\/h3\u003e\n\n\u003cp\u003eChanging metering rods, jets and step-up springs gives you control over how the carburetor meters fuel during idle, part-throttle, and full-throttle. Small incremental changes let you reduce hesitation, improve throttle tip-in, or lean the mixture where desired, without replacing the entire carburetor.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSwap rods to alter fuel enrichment curves at different throttle openings.\u003c\/li\u003e\n  \u003cli\u003eTry different jets to modify overall fuel volume and base mixture.\u003c\/li\u003e\n  \u003cli\u003eStep-up springs adjust how and when richer circuits engage for smooth transitions.\u003c\/li\u003e\n  \u003cli\u003eRetaining springs keep metering rods secure under vibration and load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this kit compatible with my Edelbrock Performer carburetor?\u003c\/h3\u003e\n\n\u003cp\u003eThe 1487 kit is specified to fit with Edelbrock part #1406 and is intended for Performer Series carburetors that use the same metering system. If your carburetor is a Performer Series model, review the carburetor part number and mounting details to confirm fitment before purchasing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned around Edelbrock Performer Series hardware and dimensions.\u003c\/li\u003e\n  \u003cli\u003eBest suited for roadside tuning and workshop dialing of part #1406-equipped carbs.\u003c\/li\u003e\n  \u003cli\u003eNot a universal kit — confirm carburetor compatibility first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use this kit when tuning my carburetor?\u003c\/h3\u003e\n\n\u003cp\u003eStart by recording the carburetor’s current components and engine behavior, then change one item at a time while road-testing or dyno-checking. Keep a log of each change and resulting performance so you can identify the optimal combination for your engine, altitude and driving style.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDocument initial jet, rod and spring settings before swapping parts.\u003c\/li\u003e\n  \u003cli\u003eMake single-component changes and test drive to isolate effects.\u003c\/li\u003e\n  \u003cli\u003eUse the provided retaining springs and hardware for secure installation.\u003c\/li\u003e\n  \u003cli\u003eConsider environmental factors—altitude and temperature influence tuning choices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Edelbrock 1487 Performer Series Carburetor Calibration Kit is aimed at enthusiasts, professional tuners, and mechanics who maintain or tune Edelbrock Performer carburetors—especially those using part #1406. It’s suitable for street cars, classic restorations and mild performance builds where precise fuel metering and smooth throttle transitions matter. If you need a straightforward parts assortment to experiment with metering rod tapers, main\/idle jet sizes and step-up springs, this kit gives you the components to refine your carburetor without wholesale replacement.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the 1487 kit fit my Performer carburetor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This kit is designed for Edelbrock Performer carburetors compatible with part #1406. Verify your carburetor part number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include metering rod retaining springs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit contains a pair of metering rod retaining springs plus a range of rods, jets and step-up springs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55169094680919,"sku":"B00062YBTS","price":87.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-1487-kit-parts-layout.jpg?v=1790418509"},{"product_id":"edelbrock-performer-link-timing-chain-gear-set-7802-solid-bushing-chain-billet-crank-gears-up-to-6-500-rpm","title":"Edelbrock Performer-Link Timing Chain \u0026 Gear Set 7802 — Solid-Bushing Chain, Billet Crank Gears (Up to 6,500 RPM)","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 7802 Performer-Link is a solid-bushing timing chain and gear kit engineered to deliver stable cam-to-crank timing for street and performance V8 applications up to 6,500 RPM.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Performer-Link timing set pairs a true-rolling solid-bushing chain with precision-machined billet crank gears and high-strength cam sprockets to minimize stretch and maintain accurate valve timing. Designed for compatibility with stock or performance camshafts, the 7802 offers selectable cam timing via three keyways so you can advance, retard, or run stock timing positions. Note that this set is optimized for durability and accuracy under typical street and moderate performance use and is not rated for sustained operation above 6,500 RPM.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Performer-Link design reduce chain stretch and timing drift?\u003c\/h3\u003e\n\n\u003cp\u003eThe 7802 uses a solid bushing chain that provides a continuous rolling bearing surface against the sprockets, instead of traditional riveted links. That rolling interface spreads load, reduces friction, and resists elongation that leads to timing drift over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid-bushing chain provides a true rolling contact with sprockets\u003c\/li\u003e\n  \u003cli\u003eReduced friction means less wear on pins and bushings\u003c\/li\u003e\n  \u003cli\u003eTighter long-term timing consistency than standard riveted chains\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and machining choices improve durability and accuracy?\u003c\/h3\u003e\n\n\u003cp\u003eEdelbrock built the critical gears from billet SAE-1144 steel and applied induction heat-treating for a hardened surface that resists wear. Cam sprockets are cast iron with high tensile strength to withstand repeated loading while keeping manufacturing cost-effective.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCrank gears: billet SAE-1144, precision machined, heat-treated for wear resistance\u003c\/li\u003e\n  \u003cli\u003eCam sprockets: high-tensile cast iron to handle repetitive loading\u003c\/li\u003e\n  \u003cli\u003eThree keyways on cam sprockets for precise timing selection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this set with my current camshaft and how do the timing positions work?\u003c\/h3\u003e\n\n\u003cp\u003eThe 7802 is compatible with most stock and performance cams that use a three-keyway cam sprocket. The cam sprockets allow selection of three timing positions: 4 degrees advanced, stock, or 4 degrees retarded. This offers modest tuning flexibility for driveability or compatibility when swapping heads or intake components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with either stock or aftermarket performance cams designed for three-keyway sprockets\u003c\/li\u003e\n  \u003cli\u003eProvides +4°, 0°, or −4° cam timing adjustment via keyway selection\u003c\/li\u003e\n  \u003cli\u003eUseful for correcting timing when changing valvetrain geometry or improving mid-range response\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about RPM limits and included components?\u003c\/h3\u003e\n\n\u003cp\u003eThe Performer-Link series is engineered for street and moderate-performance engines and is not rated for continuous use above 6,500 RPM. The kit focuses on core timing components; fasteners, thrust bearings, offset bushings, and gaskets are not included, so plan to reuse or source those separately during installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNot intended for sustained operation beyond 6,500 RPM\u003c\/li\u003e\n  \u003cli\u003eDoes not include bolts, studs, thrust bearing, offset bushings, or gaskets\u003c\/li\u003e\n  \u003cli\u003eRecommended to inspect or replace related hardware during installation for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Edelbrock 7802 Performer-Link timing chain and gear set is aimed at street-driven V8 owners and builders who want a more durable, low-stretch timing solution than a standard riveted chain without moving to an expensive race-only system. It suits restorations, mild performance upgrades, and engine swaps where reliable long-term timing accuracy and modest cam timing adjustability matter. If you plan high-RPM race use or need a complete hardware kit, consider pairing this set with the necessary thrust components, fasteners, and a valvetrain review to ensure compatibility and longevity.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Edelbrock 7802 compatible with performance cams?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It works with most stock and performance cams that use three-keyway cam sprockets for timing adjustment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bolts and thrust bearings included in the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Bolts, studs, thrust bearing, offset bushings, and gaskets are not included and must be sourced separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55169105723735,"sku":"B00062YBHK","price":74.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-front-view-gear-chain-set.jpg?v=1790418768"},{"product_id":"edelbrock-17301-micro-in-line-fuel-pump-red-7-psi-compact-self-priming-design","title":"Edelbrock 17301 micro in-line fuel pump, Red — 7 PSI compact self-priming design","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 17301 is a compact, red micro electronic in-line fuel pump that delivers dependable 7 PSI minimum pressure for gasoline or diesel applications in a universal, easy-to-install package.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Edelbrock 17301 Fuel Pump is designed to provide a simple, reliable source of fuel flow for retrofit projects, performance upgrades, and replacement duties where space is limited. Its micro footprint and self-priming, gravity-fed in-line design reduce the risk of vapor lock and flooding while operating quietly. The pump ships with a filter, mounting hardware, and instructions so you can complete most installs without sourcing extra parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Edelbrock 17301 perform in tight engine bays?\u003c\/h3\u003e\n\u003cp\u003eThis fuel pump is built for compact installations: the small, cylindrical body and hose barb inlet allow it to fit into confined spaces along fuel lines. Because it's an in-line style, you can position it between the tank and carburetor or injector rail where clearance is minimal. Its quiet operation also keeps cabin noise down in close-quarter installs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMicro-sized housing suitable for cramped engine compartments\u003c\/li\u003e\n  \u003cli\u003eHose barb inlet for easy connection to common fuel lines\u003c\/li\u003e\n  \u003cli\u003eQuiet motor minimizes audible intrusion near the firewall\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this pump work with gasoline and diesel engines?\u003c\/h3\u003e\n\u003cp\u003eThe Edelbrock 17301 is offered for both gasoline and diesel setups, making it versatile for multiple fuel types. Confirm you have the correct variant for your fuel system before ordering. Its universal-fit design supports retrofits and replacements across a wide range of vehicles and equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAvailable in gasoline and diesel-compatible models\u003c\/li\u003e\n  \u003cli\u003eUniversal-fit for swap and upgrade applications\u003c\/li\u003e\n  \u003cli\u003eSelf-priming action helps restart flow after downtime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable and easy to install is the 17301?\u003c\/h3\u003e\n\u003cp\u003eThe pump uses a straightforward electric in-line layout with a gravity-fed, self-regulating mechanism that minimizes complexity and potential failure points. Edelbrock supplies a filter and mounting hardware so you can complete most installations without additional purchases. The included instructions walk through wiring, mounting location, and recommended hose connections for a hassle-free setup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounting hardware and filter included for immediate installation\u003c\/li\u003e\n  \u003cli\u003eSimple electrical hookup suitable for standard 12V systems\u003c\/li\u003e\n  \u003cli\u003eRegulating design reduces chances of vapor lock and flooding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat operating specs and features should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe unit is an electric, in-line fuel pump engineered to maintain a minimum of 7 PSI, suitable for many carbureted and low-pressure fuel injection systems. Its durable construction aims to balance long life with compact dimensions. The hose barb inlet and universal mounting options make it broadly compatible with aftermarket fuel lines and brackets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eElectric in-line pump with minimum 7 PSI output\u003c\/li\u003e\n  \u003cli\u003eHose barb inlet type for common fuel hose connections\u003c\/li\u003e\n  \u003cli\u003eMounting hardware included; universal-fit design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Edelbrock 17301 is aimed at DIY mechanics, restomod builders, and performance hobbyists who need a small, dependable fuel pump for retrofit or replacement work. It's a good match for applications where space is constrained and a quiet, self-priming pump is preferred—such as classic cars, hot rods, small trucks, and small-engine conversions. If you require high-pressure modern fuel injection flow or OEM-specific electronic control, consult a specs match; otherwise, this pump offers an economical, easy-to-install solution for low- to moderate-pressure fuel delivery needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Edelbrock 17301 compatible with 12V systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the pump is designed for standard 12V automotive electrical systems and uses a simple two-wire hookup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include mounting hardware and a filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — Edelbrock supplies mounting hardware and a fuel filter with the pump for a complete installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55169135706455,"sku":"B06ZZVDZG3","price":71.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-17301-front-packaging-red-pump.jpg?v=1790419233"},{"product_id":"edelbrock-throttle-lever-adapter-1483-gold-steel-cruise-control-compatible-with-mounting-hardware","title":"Edelbrock Throttle Lever Adapter 1483 — Gold Steel, Cruise‑Control Compatible with Mounting Hardware","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 1483 Throttle Lever Adapter is a steel, gold-iridited adapter that lets automatic-transmission vehicles with cable throttles (excluding AOD) use Edelbrock throttle lever setups and remain cruise-control compatible.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a simple replacement or upgrade for compatible Edelbrock throttle assemblies, this adapter provides the correct geometry and hardware to link the throttle cable to Edelbrock carburetor levers. It is intended for vehicles with automatic transmissions that use a cable-operated throttle (note: not compatible with AOD transmissions). The part ships individually and includes the required mounting hardware for straightforward installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and transmissions work with this Edelbrock throttle lever adapter?\u003c\/h3\u003e\n\u003cp\u003eThis adapter is built for automatic-transmission vehicles that use a cable-operated throttle linkage; it will not fit applications with an AOD (Auto Overdrive) transmission. Always verify your throttle cable arrangement and compare to Edelbrock fitment notes before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: automatic transmissions with cable throttle linkage\u003c\/li\u003e\n  \u003cli\u003eNot compatible: AOD (Auto Overdrive) transmissions\u003c\/li\u003e\n  \u003cli\u003eTypical use: aftermarket Edelbrock carburetor throttle levers\u003c\/li\u003e\n  \u003cli\u003eSold individually for single-carburetor installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion resistant is the 1483 adapter?\u003c\/h3\u003e\n\u003cp\u003eThe adapter is manufactured from steel for strength and finished with a gold iridited coating to resist surface corrosion and wear. The finish improves longevity in engine-bay environments while the included hardware is sized for secure installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: robust steel construction\u003c\/li\u003e\n  \u003cli\u003eSurface finish: gold iridited for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eHardware: included for immediate installation\u003c\/li\u003e\n  \u003cli\u003eService life: designed for under-hood exposure and mechanical linkage use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this adapter keep my cruise control operational?\u003c\/h3\u003e\n\u003cp\u003eYes — the Edelbrock 1483 adapter is compatible with cruise-control systems when used on supported automatic, cable-throttle applications. It maintains correct throttle geometry so the cruise actuator and cable function as designed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCruise-friendly design: preserves throttle linkage alignment\u003c\/li\u003e\n  \u003cli\u003eWorks with typical aftermarket Edelbrock throttle levers\u003c\/li\u003e\n  \u003cli\u003eIncludes mounting hardware to ensure secure connection\u003c\/li\u003e\n  \u003cli\u003eSold individually when only one adapter is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how easy is the installation?\u003c\/h3\u003e\n\u003cp\u003eThe 1483 ships with the mounting hardware required to attach the adapter to the throttle lever and cable end, simplifying installation. Basic mechanical skills and standard hand tools are usually all that’s needed to swap or fit the adapter onto a compatible carburetor and linkage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: adapter and mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstallation: straightforward with common hand tools\u003c\/li\u003e\n  \u003cli\u003eRequirement: verify non-AOD transmission and cable throttle\u003c\/li\u003e\n  \u003cli\u003eSold separately: one adapter per carburetor\/throttle lever\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Edelbrock 1483 Throttle Lever Adapter is aimed at automotive enthusiasts, mechanics, and restorers who are fitting Edelbrock carburetors or throttle levers on automatic-transmission vehicles that use a cable-operated throttle system (excluding AOD). It’s a practical replacement part when the original adapter is worn or when converting to Edelbrock throttle components and needing cruise control compatibility. If you’re uncertain about fitment, compare your vehicle’s transmission type and throttle cable arrangement with Edelbrock fitment information or consult a mechanic before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Edelbrock 1483 compatible with AOD transmissions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The 1483 is not compatible with AOD (Auto Overdrive) transmissions; it fits automatic vehicles with cable-operated throttles only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the adapter include installation hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Edelbrock 1483 is sold individually and includes the necessary mounting hardware for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55169149600087,"sku":"B000CN4ZQK","price":59.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-throttle-lever-adapter-front-view.jpg?v=1790419544"},{"product_id":"edelbrock-chrome-drop-down-fuel-inlet-for-carburetors-8134-passenger-side-6-an-with-40-micron-filter","title":"Edelbrock Chrome Drop‑Down Fuel Inlet for Carburetors 8134 — Passenger‑Side -6 AN with 40‑Micron Filter","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 8134 is a chrome drop‑down fuel inlet for Edelbrock carburetors that includes a -6 AN male inlet and an integrated 40‑micron aluminum fuel filter for tidy, right‑side plumbing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis fuel inlet is built to route supply lines on the passenger side beneath linkage and choke housings, providing a neat appearance and simplified hose routing for Edelbrock carburetors. Constructed from plated steel with a 5\/8\"‑20 banjo bolt and gaskets, it connects to Edelbrock fuel line kits to complete the pump‑to‑carburetor plumbing. The 8134 is offered in a chrome finish and ships with a filtration element to protect the carburetor metering circuits from larger particulates.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 8134 change fuel line routing under the carburetor?\u003c\/h3\u003e\n\u003cp\u003eThe 8134 uses a drop‑down design to move the fuel inlet to the passenger side below the carburetor linkage and choke assembly. This keeps the hose out of the way of moving parts and improves engine bay clearance and appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePassenger‑side routing places the hose beneath linkage\/choke housings.\u003c\/li\u003e\n  \u003cli\u003eDrop‑down fitting reduces interference with throttle and choke travel.\u003c\/li\u003e\n  \u003cli\u003eUses a 5\/8\"‑20 banjo bolt for secure mounting and included gaskets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connections and filter features are included with the inlet?\u003c\/h3\u003e\n\u003cp\u003eThe 8134 model includes an aluminum housing containing a 40‑micron filter element and a -6 AN male inlet that mates to Edelbrock fuel line kits. That filter helps trap larger contaminants before they enter the carburetor circuits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated 40‑micron aluminum filter element for debris protection.\u003c\/li\u003e\n  \u003cli\u003e-6 AN male inlet accepts Edelbrock line kits for a complete plumbing run.\u003c\/li\u003e\n  \u003cli\u003ePlated steel body and chromed finish for durability and appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this inlet fit my Edelbrock intake manifold and carburetor?\u003c\/h3\u003e\n\u003cp\u003eThe inlet is made to work with Edelbrock carburetors and most intake manifolds, but it will not fit certain intake manifold part numbers. Verify compatibility before purchasing to avoid fitment issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for Edelbrock carburetors and plumbing systems.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with intake manifolds #2156, #21561, #21563, #2176, #21761, #21763.\u003c\/li\u003e\n  \u003cli\u003eUses standard 5\/8\"‑20 banjo bolt mounting; confirm clearance at installation site.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Edelbrock 8134 chrome fuel inlet suits classic car restorers, hot‑rodders, and anyone installing Edelbrock carburetor plumbing who wants a tidy, right‑side hose routing and a built‑in coarse filter. Avoid this part if your intake manifold is one of the excluded part numbers or if you require a different hose barb style — other Edelbrock inlets offer barbed ends for 3\/8\" push‑on rubber hose. When paired with an Edelbrock fuel line kit, the 8134 provides a factory‑looking, durable feed path from pump to carburetor while helping keep larger particles out of the carburetor's feed passages.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the 8134 include a fuel filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 8134 has an integrated aluminum housing with a 40‑micron filter element protecting the carburetor inlet.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this inlet fit my intake manifold?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Possibly — it fits many Edelbrock carburetor setups but not manifolds #2156, #21561, #21563, #2176, #21761, or #21763.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55169234829655,"sku":"B00063040C","price":68.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-chrome-fuel-line-front_c7a8cbab-978b-49f1-8a82-64df6843aee9.jpg?v=1790421385"},{"product_id":"edelbrock-14-inch-round-air-cleaner-black-3-paper-element-fits-5-1-8-carb-flanges","title":"Edelbrock 14-inch Round Air Cleaner Black — 3\" Paper Element, Fits 5-1\/8\" Carb Flanges","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 1223 Pro-Flo is a 14-inch diameter, black-finish round air cleaner with a 3\" paper filter element designed to fit 5-1\/8\" diameter carburetors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Pro-Flo assembly combines a large 14\" airflow face with a 3\" pleated paper element and a durable black aluminum housing to provide reliable intake filtration for classic and performance carbureted engines. It’s built to match common carburetor flange sizes and includes design features that accommodate crankcase ventilation and a range of carburetor brands, making it a versatile upgrade for street and show vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eWill this air cleaner fit my carburetor?\u003c\/h3\u003e\n\n\u003cp\u003eThe Edelbrock 1223 is made to fit carburetors that use a 5-1\/8\" (approximately 5.125\") diameter flange, which covers many Performer, Thunder, Holley, Thermo-Quad, Quadra-Jet and Carter AFB setups. Measure your carb flange diameter to confirm compatibility before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e14\" outer diameter, fits 5-1\/8\" carb flanges\u003c\/li\u003e\n  \u003cli\u003eWorks with common Edelbrock and aftermarket carb models\u003c\/li\u003e\n  \u003cli\u003eConfirm flange size with a caliper or ruler for a precise match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the 3\" paper element affect performance and maintenance?\u003c\/h3\u003e\n\n\u003cp\u003eThe 3\" pleated paper element balances filtration efficiency and service life—big enough to provide good airflow while trapping particulates that could harm the engine. Paper elements are economical and easy to replace, so routine upkeep is straightforward for street-driven or intermittently used performance cars.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e3\" pleated paper for effective contaminant capture\u003c\/li\u003e\n  \u003cli\u003eSimple element replacement for low-cost maintenance\u003c\/li\u003e\n  \u003cli\u003eLarge 14\" face area helps reduce restriction compared to smaller filters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and ventilation features should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eThe air cleaner includes a base with factory-style knock-outs to accept a crankcase ventilation or PCV adapter (adapter sold separately), allowing you to route crankcase gases back into the intake for cleaner engine bay routing. Height is measured from the gasket flange to the top of the retaining nut, so check clearance under your hood and any shaker or scoop provisions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBase knock-outs for crankcase ventilation adapter (adapter not included)\u003c\/li\u003e\n  \u003cli\u003eHeight listed from gasket flange to retaining nut—verify hood clearance\u003c\/li\u003e\n  \u003cli\u003eAluminum housing with black finish for corrosion resistance and appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the finish and construction suitable for show cars as well as daily drivers?\u003c\/h3\u003e\n\n\u003cp\u003eThe black-finished aluminum housing offers a clean, low-glare look that complements many engine bays and show builds while remaining practical for daily use. The construction tolerances provide a reliable seal and long-term durability when paired with routine filter changes.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBlack aluminum housing for a refined engine-bay appearance\u003c\/li\u003e\n  \u003cli\u003eSturdy retaining nut and flange sealing for dependable operation\u003c\/li\u003e\n  \u003cli\u003eDimensions accurate within approximately 1\/8\" for predictable fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Edelbrock 1223 Pro-Flo 14\" black air cleaner is aimed at owners of carbureted vehicles needing a large-diameter, attractive air filter assembly that fits 5-1\/8\" flanges—ideal for classic muscle cars, restomods and performance street cars where balance between airflow, filtration, and appearance matters. Choose this unit if you want a straightforward installation, serviceable paper element, and the option to add crankcase ventilation plumbing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the 1223 fit a Holley carburetor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits carburetors with a 5-1\/8\" diameter flange, including many Holley models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is a crankcase ventilation adapter included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the base has knock-outs for a ventilation adapter, but the adapter is sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55169695875415,"sku":"B003D29T4A","price":89.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-1223-front-view.jpg?v=1790423213"},{"product_id":"edelbrock-signature-series-14-inch-air-cleaner-triple-chrome-3-inch-filter","title":"Edelbrock Signature Series 14-inch Air Cleaner, Triple Chrome, 3-inch Filter","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 1221 Signature Series Air Cleaner is a 14-inch, triple-chrome plated steel air intake cover designed to pair with Signature Series valve covers and fit popular 5-1\/8\" carburetors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis round air cleaner blends classic show-car shine with functional fitment for street and restored engines. Stamped from heavy 18-gauge steel and finished in a triple chrome plate, it offers a durable, polished look while working with common carburetor setups. The 1221 model includes a three-inch filter element and a deeper flange for compatibility with Edelbrock carburetors, plus a base knockout and crankcase ventilation adapter for cleaner engine bay routing.\u003c\/p\u003e\n\n\u003ch3\u003eWill this air cleaner fit my 5-1\/8\" carburetor and Signature valve covers?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the 1221 is designed to work with standard 5-1\/8\" diameter carburetors and complements Edelbrock Signature Series valve covers for a cohesive appearance. Its build accounts for clearance and sealing needs so installation is straightforward on compatible setups.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e14\" outer diameter with 3\" filter element and 3-3\/4\" overall height for fit balance\u003c\/li\u003e\n  \u003cli\u003e3\/8\" deeper flange to clear Edelbrock carburetor profiles\u003c\/li\u003e\n  \u003cli\u003eStamped from 18-gauge steel for rigidity and stable mounting\u003c\/li\u003e\n  \u003cli\u003eTriple chrome plating matches polished valve cover finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the 1221 handle crankcase ventilation and engine routing?\u003c\/h3\u003e\n\n\u003cp\u003eThe base is fitted with removable knockouts and includes an adapter to route crankcase vapors back into the intake system. That lets you retain a closed breather setup without aftermarket plumbing headaches, preserving engine bay cleanliness and emissions compatibility where applicable.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIntegrated knockouts in base for simple hose connection points\u003c\/li\u003e\n  \u003cli\u003eIncludes crankcase ventilation adapter to reconnect PCV or breather hoses\u003c\/li\u003e\n  \u003cli\u003eFactory-style routing reduces visible hoses for a tidy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finishes ensure long-term appearance and strength?\u003c\/h3\u003e\n\n\u003cp\u003eThe 1221 is formed from 18-gauge steel and undergoes a triple chrome plating process for a bright, durable finish that resists corrosion and road wear. The robust metal construction keeps the unit from flexing under clamp pressure and helps the air cleaner maintain alignment over time.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e18-gauge steel stamping provides structural stiffness\u003c\/li\u003e\n  \u003cli\u003eTriple chrome plating gives high-luster shine and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eSturdy mounting surfaces maintain seal integrity with repeated service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and installation notes I should expect?\u003c\/h3\u003e\n\n\u003cp\u003eThe 1221 measures 14 inches in diameter and has a total height of 3-3\/4 inches, accommodating a 3-inch replacement filter element. It’s engineered for bolt-on installation over popular carburetors; check carburetor stud spacing and available hood clearance before fitting larger aftermarket intakes or scoop setups.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e14\" diameter, 3\" element, 3-3\/4\" overall height\u003c\/li\u003e\n  \u003cli\u003eWorks with common 5-1\/8\" carburetor openings and Edelbrock hardware\u003c\/li\u003e\n  \u003cli\u003eVerify hood clearance when used with tall air scoops or stacks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Edelbrock 1221 Signature Series Air Cleaner suits restorers, street-rod builders, and performance enthusiasts seeking a show-ready chrome solution that matches Signature Series valve covers. It’s ideal for drivers who want factory-style fitment, simple crankcase ventilation routing, and a robust metal assembly that looks as good under the hood as it does at car shows.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the 1221 fit Edelbrock carburetors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 1221 has a 3\/8\" deeper flange specifically to clear Edelbrock carburetor profiles for proper fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is a crankcase vent adapter included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 14\" model includes base knockouts and an adapter to connect crankcase ventilation hoses.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55170230419799,"sku":"B000CNAO9W","price":89.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-1221-front-view.jpg?v=1790425542"},{"product_id":"edelbrock-performer-600-cfm-4-barrel-carburetor-1405-square-bore-air-valve-secondary-aluminum-body","title":"Edelbrock Performer 600 CFM 4‑Barrel Carburetor - 1405 Square‑Bore, Air‑Valve Secondary, Aluminium Body","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 1405 Performer is a 600 CFM, 4‑barrel square‑bore carburetor built for reliable street performance on small‑block and compatible big‑block V8 engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt with a two‑piece all‑aluminum body to reduce heat soak and distortion, this Edelbrock Performer 600 CFM carburetor delivers tunable fuel control and straightforward installation for many aftermarket manifolds. It pairs with Edelbrock Performer, Performer EPS, Performer RPM, RPM Air‑Gap, Torker II and similarly designed manifolds, offers both timed and full vacuum ports for ignition advance, and accepts either manual or electric choke setups. The unit is configured as an air‑valve secondary with a single fuel inlet and comes ready with specific jetting and metering rod choices to suit common street builds.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this carburetor improve street drivability?\u003c\/h3\u003e\n\u003cp\u003eThe air‑valve secondary design provides smoother throttle transition and improved part‑throttle manners compared with traditional butterfly secondaries. The all‑aluminum two‑piece construction minimizes heat transfer to the fuel bowls, which helps maintain consistent metering and reduces vapor lock risk. Replaceable metering rods and jets make dialing in mixture simple.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e600 CFM flow rate for broad street performance\u003c\/li\u003e\n  \u003cli\u003eAir‑valve secondary for progressive throttle response\u003c\/li\u003e\n  \u003cli\u003eAluminum two‑piece body for cooler operation and less warping\u003c\/li\u003e\n  \u003cli\u003eEasily changed metering rods and jets for tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat jetting and tuning pieces are included and adjustable?\u003c\/h3\u003e\n\u003cp\u003eThis carburetor ships with factory metering parts chosen for general street use: primary metering jets, a different-size secondary jet, and matched metering rods plus a step‑up spring. Those components provide a sensible starting point while leaving room for tuning to match cam, exhaust and intake differences. Electric choke can be fitted later if desired.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrimary metering jet: .100\u003c\/li\u003e\n  \u003cli\u003eSecondary metering jet: .095\u003c\/li\u003e\n  \u003cli\u003eMetering rods: .070 x .047 (replaceable for tuning)\u003c\/li\u003e\n  \u003cli\u003eStep‑up spring: orange (5\" Hg) for secondary transition\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my engine and accessories?\u003c\/h3\u003e\n\u003cp\u003eThe Edelbrock 1405 is intended for small‑block engines and some larger V8s when used with compatible square‑bore manifolds. It accepts late‑model water necks, alternator brackets, HEI distributors and air‑conditioning components on most manifolds, but note it will not clear a stock Corvette hood. The carburetor does not include EGR provisions or exhaust‑heated choke passages.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Edelbrock Performer family manifolds and similar designs\u003c\/li\u003e\n  \u003cli\u003eAccepts late‑model water neck, A\/C and HEI equipment on most intakes\u003c\/li\u003e\n  \u003cli\u003eNot compatible with stock Corvette hood clearance\u003c\/li\u003e\n  \u003cli\u003eNo EGR or exhaust‑heated choke provisions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is durability and maintenance addressed?\u003c\/h3\u003e\n\u003cp\u003eConstructed entirely from aluminum with no plastic parts below the fuel bowl, this Performer carburetor resists common failure modes like plastic warpage or power‑valve blowouts. There are no gaskets below bowl level to reduce leak points, and the simple layout makes routine service and parts replacement straightforward for home mechanics or professional shops.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo plastic parts in critical areas to prevent common failures\u003c\/li\u003e\n  \u003cli\u003eFewer gaskets below fuel bowl reduces leak opportunities\u003c\/li\u003e\n  \u003cli\u003eReplaceable jets and metering rods simplify tuning and repair\u003c\/li\u003e\n  \u003cli\u003eIncludes options to add electric choke if required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Enthusiasts building or refreshing street‑driven V8s who want a dependable, tunable 600 CFM carburetor that suits aftermarket square‑bore manifolds. It's a practical choice for small‑block applications and many larger motors when paired with compatible intakes, and for anyone who prefers mechanical simplicity with room for fine tuning.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I add an electric choke to the Edelbrock 1405?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The carburetor ships with a manual choke but is set up to accept an electric choke if you choose to install one.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What carburetors or manifolds is the 1405 compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Designed for Edelbrock Performer family manifolds and similar square‑bore intakes; verify hood clearance and accessory fit for specific vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55170426175831,"sku":"B000182DII","price":544.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-1405-front-view.jpg?v=1790429109"},{"product_id":"edelbrock-performer-2701-intake-manifold-aluminum-dual-plane-for-small-block-chevy-improves-low-and-mid-range-torque","title":"Edelbrock Performer 2701 Intake Manifold — Aluminium dual-plane for small-block Chevy, improves low‑ and mid‑range torque","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 2701 Performer Intake Manifold is a dual-plane, aluminum intake engineered to boost low- and mid-range power when used with square-bore or Thunder Series AVS carburetors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for classic small-block Chevy applications that retain a stock or original-equipment deck height, the 2701 Performer swaps into many vehicle-specific setups to improve throttle response and torque from idle through approximately 5,500 RPM. Its lightweight aluminum construction and runner geometry optimize airflow for common street and mild-performance builds without requiring extensive engine modification.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this manifold change day-to-day driving and throttle response?\u003c\/h3\u003e\n\u003cp\u003eThe 2701 is tuned to enhance low- and mid-range performance where street-driven engines spend most of their time. Drivers will notice crisper acceleration off the line and stronger, more usable torque through normal driving rev ranges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved torque and horsepower from idle to 5,500 RPM\u003c\/li\u003e\n  \u003cli\u003eSharper throttle response with square-bore carburetors\u003c\/li\u003e\n  \u003cli\u003eDual-plane design reduces top-end peaky behavior for smoother power delivery\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hardware and carburetor setups work best with this manifold?\u003c\/h3\u003e\n\u003cp\u003eThe manifold is intended for single carburetor, square-bore installations and pairs especially well with Edelbrock Performer Series square-bore or Thunder Series AVS carburetors. It is built for engines with a standard deck height and does not include EGR provisions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle carburetor, no EGR configuration\u003c\/li\u003e\n  \u003cli\u003eOptimized for Edelbrock square-bore and Thunder AVS carburetors\u003c\/li\u003e\n  \u003cli\u003eFits engines with stock\/original deck dimensions and vehicle-specific applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials, finish, and durability features does the Edelbrock 2701 offer?\u003c\/h3\u003e\n\u003cp\u003eCast from aluminum for a favorable strength-to-weight ratio, the 2701 comes with a natural finish that resists corrosion better than cast iron and sheds several pounds from the top end of the engine. Its construction supports reliable street operation and easier installation compared with heavier alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum construction with natural finish for reduced weight and improved heat dissipation\u003c\/li\u003e\n  \u003cli\u003eDurable casting suited for everyday use and mild performance upgrades\u003c\/li\u003e\n  \u003cli\u003eVehicle-specific fitment reduces need for manifold or accessory modification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I need major tuning or additional parts after installing this manifold?\u003c\/h3\u003e\n\u003cp\u003eBecause the 2701 is designed for use with compatible Edelbrock carburetors and stock deck engines, most installations require only routine carburetor calibration and tuning. Dyno tests show measurable gains across the RPM band, but final jetting and timing adjustments depend on supporting modifications and fuel type.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical installation needs carburetor tuning and possible idle mixture adjustments\u003c\/li\u003e\n  \u003cli\u003eNo major machining required for correct vehicle-specific fitments\u003c\/li\u003e\n  \u003cli\u003eDyno-proven gains of several horsepower and foot-pounds of torque over baseline Performer manifolds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Edelbrock 2701 Performer Intake Manifold is aimed at classic small-block Chevy owners and general street-rod builders who want stronger, more usable midrange power without radical engine changes. It's a practical upgrade for restorations, daily drivers, and mild performance projects where reliability, fitment, and improved drivability matter more than extreme high-RPM power.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the 2701 fit engines with stock deck height?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Edelbrock 2701 is intended for use on standard deck height engines and is vehicle specific.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which carburetors are recommended with this manifold?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use Performer Series square-bore or Thunder Series AVS carburetors for the best measured gains and fitment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55170548433239,"sku":"B00063046Q","price":322.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-2701-front-view.jpg?v=1790430725"},{"product_id":"edelbrock-avs2-1905-650-cfm-square-flange-carburetor-satin-finish-annular-boosters-for-improved-throttle-response","title":"Edelbrock AVS2 1905 650 cfm Square-Flange Carburetor Satin finish, annular boosters for improved throttle response","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock AVS2 Series 1905 is a 650 cfm, 4-barrel satin-finish carburetor with annular-flow primary boosters and a manual choke engineered for improved off-idle response and smooth cruising behavior.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis AVS2 1905 model is the next-generation Edelbrock carburetor designed to upgrade induction on small-block and big-block V8 engines. It uses annular-flow primary boosters with eight equally spaced orifices per booster to improve fuel atomization and minimize flat spots when transitioning from idle to throttle. Finished in satin, the unit includes both timed and full vacuum ports for ignition advance and comes pre-jetted and rod-equipped for a wide range of naturally aspirated applications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the AVS2 1905 improve acceleration and throttle response?\u003c\/h3\u003e\n\u003cp\u003eThe annular booster design delivers finer fuel atomization during the transition from idle to main circuits, which reduces flat spots and yields crisper throttle response. Calibration changes in the AVS2 advance off-idle and part-throttle performance compared with conventional boosters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAnnular primary boosters with eight orifices per booster for better fuel distribution\u003c\/li\u003e\n  \u003cli\u003eFactory metering jets: Primary .101 \/ Secondary .098 for balanced flow\u003c\/li\u003e\n  \u003cli\u003eMetering rods .070 x .037 and orange step-up spring optimized for ~5\" Hg\u003c\/li\u003e\n  \u003cli\u003eTimed and full vacuum ports for flexible ignition advance setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat engines and intake setups are best matched to this 650 cfm carburetor?\u003c\/h3\u003e\n\u003cp\u003eWith a 650 cfm rating and a square-flange mounting, the 1905 is suited to many street and mild-performance small-block and big-block engines. It works well on both single-plane and dual-plane intake manifolds where a mid-range powerband and street-friendly drivability are priorities.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for naturally aspirated small- and big-block V8s where 650 cfm is appropriate\u003c\/li\u003e\n  \u003cli\u003eCompatible with dual- and single-plane manifolds for street and light-performance use\u003c\/li\u003e\n  \u003cli\u003eSquare flange interface fits common aftermarket intake manifolds\u003c\/li\u003e\n  \u003cli\u003ePairs especially well with Edelbrock intakes for simplified tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tuning and installation details should I know before buying?\u003c\/h3\u003e\n\u003cp\u003eThe AVS2 ships with factory jets and metering rods that suit many stock and mildly modified engines, but some vehicles may require jet or rod changes for optimal mixture. Use Edelbrock carb studs #8008 or #8024 if your manifold needs stud conversion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory jetting: Primary .101 \/ Secondary .098; factory metering rods included\u003c\/li\u003e\n  \u003cli\u003eStep-up spring (orange) tuned for approximately 5\" Hg vacuum conditions\u003c\/li\u003e\n  \u003cli\u003eManual choke configuration requires linkage and heat source consideration\u003c\/li\u003e\n  \u003cli\u003eCarb studs #8008 or #8024 recommended if manifold stud pattern differs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the manual choke affect cold starts and drivability?\u003c\/h3\u003e\n\u003cp\u003eA manual choke gives you direct control over enrichment during cold starts and warm-up, which is useful for classic cars and custom installations where automatic systems are not desired. Proper choke use reduces over-rich conditions once the engine reaches operating temperature.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManual choke lets the operator control cold-start enrichment precisely\u003c\/li\u003e\n  \u003cli\u003eReduces unnecessary enrishment after warm-up when used correctly\u003c\/li\u003e\n  \u003cli\u003eSimple mechanical design compatible with older or restored vehicles\u003c\/li\u003e\n  \u003cli\u003eRequires driver attention during startup compared with electric chokes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Edelbrock AVS2 1905 650 cfm carburetor is aimed at enthusiasts restoring, upgrading, or tuning street-driven V8s who want improved off-idle behavior, dependable midrange performance, and a satin aesthetic. It’s a strong choice for owners of classic cars, resto-mods, and street\/strip machines that run naturally aspirated setups and benefit from manual choke control and straightforward mechanical tuning.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFeatures: Satin Finish, 4 Barrel, Annular Booster Type, Manual Choke, 650 cfm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Edelbrock 1905 compatible with dual-plane intakes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 650 cfm AVS2 1905 suits both single- and dual-plane intake manifolds for many small- and big-block V8 street applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carburetor include jets and metering rods?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It ships with primary .101 and secondary .098 metering jets and metering rods .070 x .037, plus an orange step-up spring.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55170637758807,"sku":"B004A7RWI2","price":533.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-avs2-1905-front-profile.jpg?v=1790432188"},{"product_id":"edelbrock-avs2-650-series-calibration-kit-for-1905-1906-throttle-bodies-precision-shims-hardware","title":"Edelbrock AVS2 650 Series Calibration Kit for 1905 \u0026 1906 Throttle Bodies — Precision shims \u0026 hardware","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock Calibration Kit for AVS2 650 Series (1905 \u0026amp; 1906) is a precision set of components designed to fine-tune your AVS2 throttle body system for correct airflow and sensor response.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis calibration kit provides the hardware and references you need to adjust the AVS2 650 Series throttle body assemblies so they operate within the intended specifications for the matched Edelbrock systems. It is intended to be used by technicians and experienced enthusiasts during installation, maintenance, or when optimizing the unit for a specific vehicle application. The kit supports accurate calibration of sensors, mechanical linkages, and flow characteristics to help the AVS2 perform as engineered.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does this calibration kit include and why is each part important?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains the specific items required to align and validate the AVS2 650 Series throttle bodies for models 1905 and 1906. Each component helps ensure measurements and adjustments are repeatable and reliable during setup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision hardware for setting throttle stop positions and cable geometry.\u003c\/li\u003e\n  \u003cli\u003eSensors or adapters used for verifying electronic feedback where applicable.\u003c\/li\u003e\n  \u003cli\u003eReference shims and spacers to correct minor alignment and flow discrepancies.\u003c\/li\u003e\n  \u003cli\u003eDocumentation or calibration charts that show target values and tolerances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will using the calibration kit affect installation and initial setup?\u003c\/h3\u003e\n\u003cp\u003eUsing the kit during installation saves time by giving clear, repeatable settings and reducing guesswork. It helps installers reach correct baseline adjustments so subsequent tuning can focus on vehicle-specific calibrations rather than correcting mechanical errors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpeeds up attaining proper throttle geometry and idle control positions.\u003c\/li\u003e\n  \u003cli\u003eReduces back-and-forth between shop and dyno by establishing correct starting points.\u003c\/li\u003e\n  \u003cli\u003eHelps prevent premature troubleshooting of electronic or fuel systems tied to mechanical misalignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this kit be used for maintenance or troubleshooting?\u003c\/h3\u003e\n\u003cp\u003eYes — the calibration kit is useful beyond initial fitment. It provides standard references for periodic checks and helps pinpoint whether a symptom originates from hardware misadjustment or from unrelated systems like fuel delivery or engine management.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse it to re-establish factory-recommended settings after service or component replacement.\u003c\/li\u003e\n  \u003cli\u003eCompare current measurements against the kit’s reference values to isolate issues.\u003c\/li\u003e\n  \u003cli\u003eValidate sensor outputs and mechanical ranges without guessing at tolerances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should a technician know before using this kit?\u003c\/h3\u003e\n\u003cp\u003eFamiliarity with AVS2 throttle body layouts and standard shop measuring tools is required. The calibration process assumes access to the vehicle’s installation instructions and any engine management adjustments that may follow mechanical setup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHave basic tools: feeler gauges, calipers, and torque wrench for accurate adjustments.\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle-specific installation steps before final calibration checks.\u003c\/li\u003e\n  \u003cli\u003eDocument baseline measurements to support later tuning or warranty checks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This kit is intended for performance shops, experienced home installers, and Edelbrock-savvy enthusiasts working with AVS2 650 Series throttle bodies (part numbers 1905 and 1906). It’s most valuable when combined with professional installation practices and a methodical approach to engine management tuning. If you want predictable mechanical settings and a reliable starting point for further ECU or dyno tuning, this calibration kit provides the targeted tools and references to get there.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this calibration kit compatible with both 1905 and 1906 AVS2 650 Series models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This kit is made specifically for Edelbrock AVS2 650 Series part numbers 1905 and 1906 to support correct mechanical and sensor calibration.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to use the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You’ll need common shop tools—feeler gauges, calipers, and a torque wrench—plus the vehicle’s installation guide for accurate adjustments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55170782822743,"sku":"B07T1JFJQW","price":104.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-avs2-calibration-kit-front.jpg?v=1790433868"},{"product_id":"edelbrock-ultra-spark-50-plug-wire-set-for-gm-ls-trucks-black-8-5mm-silicone-50ω-ft-kevlar-core","title":"Edelbrock Ultra Spark 50 Plug Wire Set for GM LS Trucks — Black 8.5mm Silicone, 50Ω\/ft Kevlar Core","description":"\u003cp\u003e\u003cstrong\u003eEdelbrock 22716 Ultra Spark 50 plug wire set is a high-performance spark plug wire kit with 50 ohms per foot resistance, heavy-duty 8.5mm silicone jackets, and Kevlar spiral cores for maximum voltage delivery.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Ultra Spark 50 wire set is built to supply stronger, more consistent spark energy to performance engines that demand extra voltage. Designed with an 8.5mm silicone jacket guarding a Kevlar-wrapped conductor, these wires minimize electrical interference while resisting heat, moisture and chemicals. They’re supplied in black with metal sleeves and sized for many GM LS truck applications, providing reliable ignition delivery for engines fitted with aftermarket upgrades.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these wires improve ignition on modified engines?\u003c\/h3\u003e\n\u003cp\u003eLower electrical resistance lets more of the coil’s voltage reach the plug instead of being dissipated in the lead. That’s particularly helpful for high-compression engines, forced-induction setups, or systems using aftermarket ignition components which need every bit of available voltage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e50 ohms of resistance per foot for reduced voltage loss\u003c\/li\u003e\n  \u003cli\u003eKevlar spiral-wound core for consistent conduction under load\u003c\/li\u003e\n  \u003cli\u003eHigh EMI\/RFI suppression to protect sensitive electronics\u003c\/li\u003e\n  \u003cli\u003eMetal sleeves for secure terminal connections and durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these wires durable enough for under-hood heat and chemicals?\u003c\/h3\u003e\n\u003cp\u003eYes — the heavy-duty silicone jacket and Kevlar core protect the conductor from common threats found in the engine bay. The silicone resists oil, coolant exposure and high temperatures, while the internal construction maintains electrical stability over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e8.5mm silicone outer jacket resists heat and chemicals\u003c\/li\u003e\n  \u003cli\u003eKevlar-wrapped core resists moisture and mechanical wear\u003c\/li\u003e\n  \u003cli\u003eRobust sleeve and terminal materials reduce corrosion risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my GM LS truck and how are they sized?\u003c\/h3\u003e\n\u003cp\u003eThe set is tailored for many GM LS truck applications; check length and terminal compatibility against your engine’s routing and coil\/plug locations. The kit includes 12.5\" length wires (verify fitment against your specific model year and intake configuration).\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for common GM LS truck layouts\u003c\/li\u003e\n  \u003cli\u003e12.5\" length wires included—confirm against your routing\u003c\/li\u003e\n  \u003cli\u003eMetal sleeves and terminals for secure connection to plugs and coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these compare with value or OEM replacement wires?\u003c\/h3\u003e\n\u003cp\u003eUltra-Spark 50 wires are positioned above standard or value-tier sets because they prioritize minimal resistance and enhanced suppression for performance outcomes. While OEM-style or budget wires offer acceptable daily-driver performance, the Ultra-Spark 50 focuses on maximizing available voltage for upgraded engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLower resistance than typical replacement sets for stronger spark delivery\u003c\/li\u003e\n  \u003cli\u003eImproved EMI\/RFI suppression protects radios and engine management sensors\u003c\/li\u003e\n  \u003cli\u003ePremium construction aimed at performance and longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Edelbrock 22716 Ultra Spark 50 set is best for owners of GM LS trucks or performance builds who have upgraded components (higher compression, forced induction, aftermarket coils) and need lower-resistance wires to preserve ignition voltage. It also suits enthusiasts wanting a robust, heat- and chemical-resistant wire set with improved suppression compared with stock or economy replacements.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What resistance do these Edelbrock wires have?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They provide approximately 50 ohms of resistance per foot for low voltage loss and strong spark delivery.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these wires heat and chemical resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 8.5mm silicone jacket and Kevlar-wrapped core resist under-hood heat, oil and moisture exposure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55170865529175,"sku":"B074TYJRG5","price":155.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-ultra-spark-50-front-packaging.jpg?v=1790434886"},{"product_id":"edelbrock-17303-micro-electric-fuel-pump-12v-universal-in-line-self-priming-low-noise","title":"Edelbrock 17303 Micro Electric Fuel Pump — 12V Universal In-Line, Self-Priming, Low-Noise","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 17303 is a compact, universal 12-volt micro electronic fuel pump designed to deliver steady fuel flow for gasoline and diesel applications with low noise and simple installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Edelbrock 17303 Fuel Pump combines a small footprint with a robust, gravity-fed in-line, self-priming design to reduce vapor lock and flooding risks. Built from durable rubber and cast iron components, it draws about 1 amp at maximum delivery and is intended for standard 12-volt ground electrical systems. This kit ships complete with the pump, filter, mounting hardware, and installation instructions so vehicles, small engines, or custom builds can be up and running quickly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Edelbrock 17303 prevent vapor lock and flooding?\u003c\/h3\u003e\n\u003cp\u003eThe pump’s regulating and self-priming in-line design keeps fuel pressure consistent and helps avoid the air pockets and overheating that contribute to vapor lock. Simplicity in the internal pathway minimizes places where fuel can stagnate or over-pressurize, reducing the chance of flooding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGravity-fed flow keeps fuel moving toward the engine.\u003c\/li\u003e\n  \u003cli\u003eSelf-priming action starts fuel circulation without extra parts.\u003c\/li\u003e\n  \u003cli\u003eRegulating design smooths pressure spikes that can cause flooding.\u003c\/li\u003e\n  \u003cli\u003eCompact internals reduce vapor pockets under heat stress.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical and material specifications should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe 17303 is designed for standard 12-volt ground systems and draws approximately 1 amp at peak delivery, making it energy-efficient and suitable for many small-vehicle or auxiliary fuel setups. The primary construction uses rubber and cast iron for resilient seals and a sturdy housing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNominal operating voltage: 12 volts (standard ground).\u003c\/li\u003e\n  \u003cli\u003eMaximum electrical draw: about 1 amp.\u003c\/li\u003e\n  \u003cli\u003eMaterials: rubber seals and cast iron body for durability.\u003c\/li\u003e\n  \u003cli\u003eTwo-wire electrical hookup simplifies installation and wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and maintenance for the Edelbrock 17303?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward thanks to the simple two-wire design and included mounting hardware and instructions. Routine maintenance is minimal: inspect the included inline filter and quick-check electrical connections; the compact footprint also makes access easier in tight engine bays or custom builds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes pump, inline filter, mounting hardware, and instructions.\u003c\/li\u003e\n  \u003cli\u003eSimple two-wire hook-up reduces wiring time and errors.\u003c\/li\u003e\n  \u003cli\u003eQuiet operation avoids audible cabin\/vibration noise complaints.\u003c\/li\u003e\n  \u003cli\u003eCompact size fits in constrained locations or retrofits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan the pump be used with both gasoline and diesel engines?\u003c\/h3\u003e\n\u003cp\u003eYes — the Edelbrock 17303 is offered for both gasoline and diesel applications. Choose the correct version for your fuel type and follow the installation guidance to ensure compatibility with fuel line fittings and engine requirements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAvailable variants tailored for gasoline or diesel use.\u003c\/li\u003e\n  \u003cli\u003eVerify nozzle, hose, and filter compatibility before installation.\u003c\/li\u003e\n  \u003cli\u003eNot intended to replace high-pressure EFI pumps without checking specs.\u003c\/li\u003e\n  \u003cli\u003eSuitable for gravity-feed and many low-to-moderate pressure systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Edelbrock 17303 is aimed at hobbyists, restorers, and professional installers who need a reliable, quiet, and compact in-line fuel pump for carbureted engines, small diesel setups, auxiliary systems, or custom projects. Its low electrical draw and simple two-wire design make it a practical choice for vehicles with standard 12-volt systems, especially where space and noise are concerns. If you need a balanced combination of durability, easy installation, and consistent fuel delivery for non-high-pressure applications, the 17303 is a solid, ready-to-install option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Edelbrock 17303 compatible with my 12V vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s designed for standard 12-volt ground systems and draws about 1 amp at maximum delivery.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the pump include everything needed for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit includes the pump, an inline filter, mounting hardware, and installation instructions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55171336372567,"sku":"B06ZXTDJVB","price":80.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-17303-front-profile.jpg?v=1790443095"},{"product_id":"edelbrock-4449-signature-series-low-profile-2-8-inch-aluminum-valve-cover-fits-emissions-clears-a-c-alternator","title":"Edelbrock 4449 Signature Series Low‑Profile 2.8‑inch Aluminium Valve Cover — Fits Emissions, Clears A\/C \u0026 Alternator","description":"\u003cp\u003e\u003cstrong\u003eThe Edelbrock 4449 Signature Series Valve Cover is a low-profile, service-friendly aluminum valve cover designed to fit emissions equipment while clearing air-conditioning and alternator brackets.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for both appearance and practicality, the Edelbrock Signature Series Valve Cover 4449 combines OE-style ventilation with a slim 2.8-inch profile so it works under tight engine bay clearances. It accepts all emissions components, including a PCV valve, and ships with rubber grommets for the breather hole. The design emphasizes routine access for maintenance while providing the polished look owners expect from Edelbrock accessories.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this valve cover reduce oil consumption through the PCV system?\u003c\/h3\u003e\n\u003cp\u003eThe 4449 uses original-equipment style breather baffles that help control how much oil is carried into the crankcase ventilation system. Those internal baffles break up oil droplets and limit the amount of oil vapor that can reach the PCV valve, without blocking ventilation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-style baffles reduce oil carryover to the PCV valve\u003c\/li\u003e\n  \u003cli\u003eDesigned to maintain proper crankcase ventilation\u003c\/li\u003e\n  \u003cli\u003eRubber grommets included for secure breather mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the Edelbrock 4449 fit with my engine accessories like A\/C and alternator brackets?\u003c\/h3\u003e\n\u003cp\u003eThis valve cover has a 2.8-inch overall height and a low-profile layout specifically intended to clear common air-conditioning and alternator brackets. Because of that reduced height, it’s a frequent choice when stock or aftermarket accessory placement is tight.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2.8-inch height minimizes interference with accessory brackets\u003c\/li\u003e\n  \u003cli\u003eLow-profile form suits many small-block and V8 engine bays\u003c\/li\u003e\n  \u003cli\u003eCheck specific engine and bracket dimensions before ordering for absolute fit confirmation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes the 4449 work with emissions systems and breathers?\u003c\/h3\u003e\n\u003cp\u003eYes — the Edelbrock 4449 accepts emissions equipment, including PCV valves, and includes rubber grommets for the breather hole. Note that matching decorative breathers are available separately if you want a finished look or a specific breather style.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with PCV valves and stock emissions plumbing\u003c\/li\u003e\n  \u003cli\u003eRubber grommets included to seal breathers properly\u003c\/li\u003e\n  \u003cli\u003eDecorative breathers sold separately for visual customization\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow serviceable is this valve cover for routine maintenance?\u003c\/h3\u003e\n\u003cp\u003eEngineered for serviceability, the 4449 lets you access valve train components and ventilation fittings without complex modifications. The straightforward design simplifies tasks like rocker arm inspection or replacing PCV hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemovable breathers and accessible grommets for quick servicing\u003c\/li\u003e\n  \u003cli\u003eSlim profile reduces the need to remove accessories during routine checks\u003c\/li\u003e\n  \u003cli\u003eDurable construction built for repeated maintenance cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Edelbrock 4449 Signature Series Valve Cover suits car owners and builders who want a factory-compatible, low-profile valve cover that accommodates emissions gear and common accessory brackets. It’s ideal for enthusiasts updating small-block V8 valve covers for improved appearance and easier routine service, while retaining PCV and breather functionality. Confirm your engine’s clearance and mounting dimensions before purchase to ensure fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Edelbrock 4449 accept PCV valves and emissions equipment?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 4449 accepts PCV valves and other emissions components and includes rubber grommets for the breather hole.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this valve cover clear A\/C and alternator brackets?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Generally yes—the 2.8-inch low-profile design clears many A\/C and alternator brackets, but verify your engine's specific clearances before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":55171401187671,"sku":"B00062YBSY","price":91.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/edelbrock-4449-valve-cover-front-profile.jpg?v=1790444204"}],"url":"https:\/\/britishgarage.co.uk\/collections\/edelbrock.oembed?page=2","provider":"British Garage","version":"1.0","type":"link"}