{"title":"FVRITO","description":"\u003cp\u003eBrowse 50 FVRITO products at British Garage, including motorcycle \u0026amp; atv parts. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked UK delivery on every order and 30-day returns.\u003c\/p\u003e","products":[{"product_id":"fvrito-2-75-3-00-12-inner-tube-twin-pack-for-klx110-yozma-in10-straight-valve-heavy-duty-rubber","title":"FVRITO 2.75\/3.00-12 Inner Tube Twin-Pack for KLX110 Yozma IN10 — Straight Valve, Heavy-Duty Rubber","description":"\u003cp\u003e\u003cstrong\u003eFVRITO 2.75\/3.00-12 inner tube is a heavy-duty replacement tube with a straight valve stem designed to fit 12\" rims on small off-road and electric pit bikes like KLX110 and Yozma IN10.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis twin-pack of inner tubes is built for riders and technicians who need a dependable, long-lasting spare for 12-inch dirt bike wheels. Manufactured from reinforced rubber and supplied with valve accessories, the set aims to reduce roadside downtime and provide a precise airtight seal for consistent tire pressure. The product supports a wide range of 50–125cc petrol bikes and many popular electric pit bikes and e‑bikes that use a 3.00-12 sized rear tube.\u003c\/p\u003e\n\n\u003ch3\u003eWhich bikes and rims will this inner tube fit?\u003c\/h3\u003e\n\u003cp\u003eThe tube covers common 12\" rim sizes and several tire size notations used by manufacturers. Always cross-check your tire sidewall or owner’s manual for compatible dimensions before ordering to ensure a proper fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible notations: 2.50-12, 2.75-12, 3.00-12, 80\/100-12 and equivalents.\u003c\/li\u003e\n  \u003cli\u003eFits many 50cc–125cc dirt and pit bikes including KLX110, XR\/CRF variants, TTR90\/110 models.\u003c\/li\u003e\n  \u003cli\u003eAlso fits rear wheels on e-bikes like Yozma IN10, Tuttio Soleil01 and similar mini electric dirt bikes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the valve and air seal engineered for reliability?\u003c\/h3\u003e\n\u003cp\u003eThis tube uses a straight valve stem built at 90 degrees to the rubber body and includes a precision brass valve core. The design focuses on creating an airtight seal to minimize slow leaks and maintain stable inflation for safer riding and better handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStraight valve stem for easy access and pump compatibility.\u003c\/li\u003e\n  \u003cli\u003eBrass internal valve core for improved longevity and leak resistance.\u003c\/li\u003e\n  \u003cli\u003eIncludes spare valve cores and caps to replace worn components quickly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does it offer?\u003c\/h3\u003e\n\u003cp\u003eThe inner tube is molded from premium heavy-duty rubber to withstand off-road conditions and repeated repairs. Its thicker compound and construction increase puncture resistance and extend service life when compared to economy tubes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium rubber compound for abrasion and impact resistance.\u003c\/li\u003e\n  \u003cli\u003eReinforced seams to reduce blowout risk under load.\u003c\/li\u003e\n  \u003cli\u003eSuitable for home repairs, track use, and fleet maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how does it help roadside repairs?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes everything you need to swap tubes and perform small valve repairs, enabling quick roadside or workshop replacements without extra parts. Having spares and a valve tool cuts repair time and keeps you riding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 x inner tubes for immediate spares or dual-wheel service.\u003c\/li\u003e\n  \u003cli\u003e2 x red aluminum valve caps and 2 x black valve caps for protection.\u003c\/li\u003e\n  \u003cli\u003e1 x valve core wrench and 5 x brass valve stem cores for maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This FVRITO 2.75\/3.00-12 inner tube set is aimed at dirt bike owners, pit-bike racers, e-bike riders, and mechanics who need reliable spare tubes for 12\" wheels. It’s particularly useful for owners of KLX110-style machines, small motocross models (50–125cc), and a range of compact electric pit bikes such as the Yozma IN10. If you value durability, quick repairability, and broad fitment across popular small-bike platforms, this kit provides practical hardware and accessories to keep you on the trail or track with minimal downtime.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this tube fit my KLX110 rear wheel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this 2.75\/3.00-12 tube fits most KLX110 12\" rear rims, but verify your tire sidewall reads a compatible size like 80\/100-12 or 3.00-12.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are valve cores and caps included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit includes spare brass valve cores, red and black valve caps, and a valve core wrench for quick replacements.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55161039323479,"sku":"B08YJ1QWKK","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-packaging-inner-tubes.jpg?v=1790321266"},{"product_id":"fvrito-pull-recoil-starter-and-carburetor-kit-for-predator-212cc-196cc-6-5hp-starter-carb-with-gaskets-hardware","title":"FVRITO Pull Recoil Starter and Carburetor Kit for Predator 212cc\/196cc 6.5HP — Starter + Carb with Gaskets \u0026 Hardware","description":"\u003cp\u003e\u003cstrong\u003eFVRITO's all-in-one pull recoil starter and carburetor kit replaces worn starting and fuel components on Predator 212cc\/196cc and compatible mini bike and go-kart engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement kit combines a recoil pull start, a performance-ready carburetor and a full gasket and fuel hardware set so you can restore reliable starting and steady fuel delivery without hunting for separate parts. It fits a broad range of small OHV engines and many popular mini bike and go-kart models; the package includes the main components and mounting hardware required for a straightforward swap.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and vehicles will accept this FVRITO kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed for single-cylinder OHV small engines commonly sold as 6.5–7 HP units. It fits Predator 212cc and similar 196cc\/173cc\/6.5HP–7HP engines and is compatible with numerous mini bikes and go-karts from several brands.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible engines: Predator 212cc, 196cc, 173cc and equivalent 6.5–7HP OHV motors.\u003c\/li\u003e\n  \u003cli\u003eVehicle fit examples: Massimo MB200, Baja MB165\/MB200, Coleman CT200U, BT200X, KT196 and similar models.\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for many Baja Motorsports go-karts and Motovox\/Mini Bike platforms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what will I need to install it?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes the pull start assembly, a replacement carburetor, a complete gasket set and the fuel components to get you running. A set of bolts, a spark plug and a wrench are included so you have the basic hardware for a direct swap; minor adjustments and basic hand tools complete the job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded parts: pull recoil starter, carburetor, full gasket set, fuel filter, fuel line, six mounting bolts, spark plug and a small wrench.\u003c\/li\u003e\n  \u003cli\u003eMounting dimensions: adjacent bolt spacing 80mm; triangle center-to-center 132mm; diagonal across-center 160mm.\u003c\/li\u003e\n  \u003cli\u003eNote on installation: only three mounting holes are required—extra holes on the housing are not used.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit help with starting and running issues?\u003c\/h3\u003e\n\u003cp\u003eThe pull starter replaces a brittle or broken recoil so the engine can be cranked reliably, while the carburetor restores proper air–fuel metering to improve throttle response and idle stability. Together they target the two most common mechanical causes of hard starting and inconsistent running on older mini bikes and go-karts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecoil starter restores smooth rope retraction and consistent pull tension.\u003c\/li\u003e\n  \u003cli\u003eNew carburetor provides clean fuel delivery and easier adjustment for idle and throttle.\u003c\/li\u003e\n  \u003cli\u003eFuel filter and new line prevent dirt-related blockages that cause hesitation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit for? If you own a mini bike, go-kart or small OHV engine that uses the Predator-style 212\/196\/173cc platform and you’re dealing with a broken starter rope, gum-clogged carburetor, or leaking gaskets, this FVRITO kit is built to get those machines back to dependable service. It’s intended for DIY enthusiasts and mechanics who are comfortable performing basic engine swaps and adjustments; check mounting dimensions and vehicle compatibility before ordering and contact the seller if you need fitment help.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my Predator 212cc engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s designed for Predator 212cc and equivalent 196cc\/173cc 6.5–7HP OHV engines; verify your bolt spacing matches the listed dimensions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are all installation bolts included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit ships with six bolts plus a spark plug and a small wrench for basic installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55161139265879,"sku":"B092SFHYPM","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-assembly-pull-starter-carburetor.jpg?v=1790322610"},{"product_id":"fvrito-12x5-00-6-inner-tube-for-razor-dirt-quad-bent-valve-stem-heavy-duty-2-pack","title":"FVRITO 12x5.00-6 Inner Tube for Razor Dirt Quad — Bent Valve Stem, Heavy-Duty 2-Pack","description":"\u003cp\u003e\u003cstrong\u003eFVRITO 12x5.00-6 inner tube is a heavy-duty replacement tube with a bent valve stem designed to fit Razor Dirt Quad (v19+) and a wide range of 6\" rim utility equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a dependable tube for small ATVs, go-karts, yard tractors or utility wagons, this FVRITO inner tube is built from premium rubber and supplied with extra valve cores and caps so you can get back on the trail or finish a chore without extra parts runs. It fits several common 12x5.00-6 style tires and is made to match 6\" rims, offering a straightforward swap for punctured or aging tubes.\u003c\/p\u003e\n\n\u003ch3\u003eWill this inner tube fit my Razor Dirt Quad or similar vehicle?\u003c\/h3\u003e\n\n\u003cp\u003eYes — this inner tube is specified to work with Razor Dirt Quad 4-wheelers from version 19 onward and also matches many tires labeled 12x5.00-6 or equivalent. Always verify your tire sidewall markings and rim diameter before ordering to confirm compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits tire sizes: 12x5.00-6, 13x5.00-6, 5.00-6, 12x5-6 (check sidewall)\u003c\/li\u003e\n  \u003cli\u003eDesigned for 6\" rims commonly used on ATVs and utility carts\u003c\/li\u003e\n  \u003cli\u003eCompatible with go-karts, lawn tractors, wheelbarrows, hand trucks and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the FVRITO inner tube for regular yard and trail use?\u003c\/h3\u003e\n\n\u003cp\u003eThe tube is manufactured from heavy-duty rubber formulated to withstand repeated inflation cycles and common puncture stresses encountered in yard, trail and utility applications. While no tube is puncture-proof, the thicker rubber and quality construction extend service life compared with thin, low-cost replacements.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePremium rubber compound for improved tear and abrasion resistance\u003c\/li\u003e\n  \u003cli\u003eBuilt for home, commercial, and light industrial use\u003c\/li\u003e\n  \u003cli\u003eSupplied with valve spares to simplify repairs and maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat valve and spare parts are included in the package?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit arrives ready-to-install with a bent stem valve tube plus a selection of valve components to keep you rolling. Having extra cores and caps on hand reduces downtime if you need to replace a core or protect the valve from dirt and damage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e2 inner tubes with bent stem valves included\u003c\/li\u003e\n  \u003cli\u003e2 red and 2 black valve caps for color or visibility options\u003c\/li\u003e\n  \u003cli\u003e5 brass valve cores and a valve core wrench for quick servicing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain this inner tube?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation follows standard inner-tube replacement steps: partially seat one bead, position the tube, check for twists, then inflate gradually while seating the opposite bead. Routine maintenance includes keeping correct tire pressure, checking valves for leaks, and using the included wrench and spare cores for fast valve repairs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInflate gradually to seat beads and avoid pinching the tube\u003c\/li\u003e\n  \u003cli\u003eUse included valve cores and wrench for secure valve installation\u003c\/li\u003e\n  \u003cli\u003eMaintain recommended tire pressure and inspect for embedded debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This FVRITO inner tube kit is appropriate for owners of Razor Dirt Quad (v19+) and many small utility vehicles, go-karts, lawn tractors, wagons, and work carts who want a durable replacement with extra valve parts included. It suits DIYers, maintenance teams, landscapers and hobby riders who prefer to carry spares and service tools for quick roadside or yard repairs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this tube fit 6-inch rims?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The FVRITO 12x5.00-6 inner tube is made for 6\" rims and common 12x5-style tires; confirm your tire sidewall markings first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You get 2 inner tubes, 2 red and 2 black valve caps, 5 brass valve cores, and a valve core wrench.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55161653526871,"sku":"B08XJMZDS4","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-inner-tube-front-view.jpg?v=1790330905"},{"product_id":"fvrito-415-chain-110l-replacement-chain-kit-for-49cc-80cc-motorized-bikes-master-links-guide-roller","title":"FVRITO 415 Chain 110L Replacement Chain Kit for 49cc–80cc Motorized Bikes — Master Links \u0026 Guide Roller","description":"\u003cp\u003e\u003cstrong\u003eFVRITO 415 Chain 110L is a heavy‑duty, 110‑link replacement chain kit engineered to fit 2‑stroke 49cc–80cc motorized bikes, dirt bikes, and ATVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete chain kit gives owners of small displacement motorized bicycles and pit bikes a durable, ready‑to‑install replacement designed to match 415H sprockets. Built with standard 1\/2\" pitch spacing and a compact 7\/16\" overall width, the chain is compatible with many Chinese and aftermarket brands and arrives with master links and a guide roller to simplify fitment and tensioning.\u003c\/p\u003e\n\n\u003ch3\u003eWill this chain fit my 49cc or 66cc motorized bike?\u003c\/h3\u003e\n\u003cp\u003eThe FVRITO 415 chain is made to the 415H specification, which is common on 49cc through 80cc 2‑stroke engines and many small ATVs. Check your current chain pitch and width before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard pitch: 1\/2\" center‑to‑center between pins\u003c\/li\u003e\n  \u003cli\u003eInner link spacing: 3\/16\"\u003c\/li\u003e\n  \u003cli\u003eOverall width: ~7\/16\" to match 415 sprockets\u003c\/li\u003e\n  \u003cli\u003eWorks with brands like TaoTao, Lifan, Roketa and many Chinese pit bike makes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and how easy is it to install?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes everything needed to replace a full chain on most small motorized bikes. Installation is straightforward for those familiar with basic chain maintenance and requires common hand tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: one 110‑link 415 chain, six master links, and one guide roller\u003c\/li\u003e\n  \u003cli\u003eUse master link to close the loop; a chain tool or pliers can help install pins\u003c\/li\u003e\n  \u003cli\u003eChain tensioner adjustment recommended after initial ride‑in\u003c\/li\u003e\n  \u003cli\u003eGuide roller helps align chain and reduces premature wear during setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the chain and what maintenance does it need?\u003c\/h3\u003e\n\u003cp\u003eFVRITO builds this chain from higher‑grade steel for improved wear resistance under typical motorized bike loads. Routine care extends chain life — keep it clean, lubricated, and properly tensioned.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed for heavy‑duty use on small engines and off‑road conditions\u003c\/li\u003e\n  \u003cli\u003eInspect for tight links or elongation at regular intervals\u003c\/li\u003e\n  \u003cli\u003eLubricate after cleaning to prevent corrosion and reduce friction\u003c\/li\u003e\n  \u003cli\u003eReplace if wear exceeds manufacturer tolerance or if damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this chain for? Riders, mechanics, and DIY enthusiasts who own 2‑stroke 49cc–80cc motorized bicycles, pit bikes, or similar small ATVs will find this 110‑link 415 chain kit a practical replacement. It’s tailored for users seeking a direct, durable swap that matches common 415H sprockets and arrives with master links and a guide roller for quicker installation. If you’re restoring a bike, replacing a stretched chain, or upgrading to a reliable aftermarket option for everyday riding or light off‑road use, this FVRITO kit provides the essential parts and dimensions to get you back on the trail with confidence.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this 415 chain the right pitch for my 49cc bike?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this chain is 415H spec with a 1\/2\" pitch, commonly used on 49cc–80cc motorized bikes and pit bikes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include master links and tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes six master links and one guide roller; tools are not included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55161720144215,"sku":"B091823N1P","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-415-chain-front-packaging.jpg?v=1790331755"},{"product_id":"fvrito-3-00x10-2-75-10-inner-tube-kit-10-tr87-bent-valve-heavy-duty-rubber-2-pack-with-valve-cores-wrench","title":"FVRITO 3.00x10 \/ 2.75-10 Inner Tube Kit — 10\" TR87 Bent Valve, Heavy-Duty Rubber, 2-Pack with Valve Cores \u0026 Wrench","description":"\u003cp\u003e\u003cstrong\u003eFVRITO's 3.00-10 (fits 2.50–3.00x10) inner tube kit is a heavy-duty replacement set with TR87 bent valve stems designed for 10\" rims on pit bikes, scooters, mopeds and small dirt bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese inner tubes are made from premium rubber and supplied as a ready-to-install kit so you can replace worn or damaged tubes quickly. The set includes two tubes, extra valve cores, valve caps, and a wrench to speed up roadside repairs or routine maintenance. Sizes commonly listed by manufacturers as 2.50-10, 2.75-10, 3.00-10 or 80\/100-10 are supported; verify your rim and tire markings before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWill these inner tubes fit my 10\" rim dirt bike or scooter?\u003c\/h3\u003e\n\u003cp\u003eYes — the tubes are sized for 10\" rims and accommodate several nominal tire widths. Check the tire sidewall for compatible size markings to confirm fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits sizes commonly labeled 2.50-10, 2.75-10, 3.00-10 and 80\/100-10.\u003c\/li\u003e\n  \u003cli\u003eDesigned for 10-inch rims; not compatible with larger wheel diameters.\u003c\/li\u003e\n  \u003cli\u003eTR87 bent valve stem suits rims requiring angled access or back\/side valve positioning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich bikes and brands are these tubes compatible with?\u003c\/h3\u003e\n\u003cp\u003eThese inner tubes work with many small-displacement dirt bikes, pit bikes, mopeds and scooters, including popular Chinese-made models and a variety of youth bikes. Use the compatibility list as a reference rather than a guarantee; confirm your model’s tire size.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon matches include Honda XR50, XR70, CRF50, CT70 and EZ90 Cub models.\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with Razor RSF650, Motovox MVX70, Coolster and many SSR\/YCF-style pit bikes.\u003c\/li\u003e\n  \u003cli\u003eCompatible with aftermarket pit bikes from brands like YX, Lifan, Kayo and Apollo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the packaged kit and how does it help repairs?\u003c\/h3\u003e\n\u003cp\u003eThe kit is built for convenience and includes spare parts so you can complete multiple repairs without extra purchases. Small accessories reduce downtime and make roadside fixes straightforward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 2 inner tubes, 2 red valve caps and 2 black valve caps for identification.\u003c\/li\u003e\n  \u003cli\u003eComes with 5 brass replacement valve cores and a valve core wrench for fast service.\u003c\/li\u003e\n  \u003cli\u003ePremium heavy-duty rubber construction increases puncture resistance and service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a small dirt bike, pit bike, scooter, moped or youth motorcycle that uses 10\" wheels and needs a reliable replacement inner tube set, this FVRITO kit is a practical choice. It's especially useful for home mechanics, rental fleets, track day riders and anyone who prefers carrying spare parts for quick roadside or garage repairs. Always confirm your tire sidewall size and rim valve orientation before installing to ensure proper fit and safe operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this tube fit a 3.00x10 and 2.75x10 tire?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The tube fits tires labeled 2.50–3.00x10, including 2.75x10 and 3.00x10; check your tire sidewall to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are valve caps and spare cores included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes valve caps, five brass valve cores and a valve core wrench.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55161973014871,"sku":"B08YJL6NT6","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvirtiro-front-packaging-two-tubes.jpg?v=1790334354"},{"product_id":"fvrito-12v-led-atv-headlight-for-50-125cc-quads-14-led-ip67-waterproof","title":"FVRITO 12V LED ATV Headlight for 50-125cc Quads - 14-LED, IP67 Waterproof","description":"\u003cp\u003e\u003cstrong\u003eFVRITO 12V LED front headlight is a direct-replacement LED lamp made to fit most 50cc–125cc Chinese-style ATVs, offering brighter, longer-lasting illumination and IP67 water resistance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you’re replacing a worn or dim headlamp on a small quad or mini ATV, this FVRITO LED front light is built to be a plug-and-play upgrade for many 50–125cc models from brands like Coolster, Taotao, Roketa, Baja, Kazuma and others. It uses 14 high-efficiency LEDs, a three-wire plug, and a compact mounting pattern so installation is straightforward on compatible bikes. The housing is sealed to IP67 standards and includes improved heat dissipation for longer service life.\u003c\/p\u003e\n\n\u003ch3\u003eHow easy is this headlight to install on my 110cc or 125cc ATV?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be simple: the lamp uses a three-wire plug and a fixed bolt spacing of 103 mm (4.05 inches) center-to-center, matching many small-ATV mounting brackets. Basic hand tools are usually all you need to swap the old unit for this LED headlight.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounting bolts center-to-center: 103 mm (4.05 in)\u003c\/li\u003e\n  \u003cli\u003eVoltage: 12V, fits standard ATV electrical systems\u003c\/li\u003e\n  \u003cli\u003eThree-wire connector for plug-and-play wiring\u003c\/li\u003e\n  \u003cli\u003eCompact form factor to fit common headlight housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance improvements will I notice compared to a halogen lamp?\u003c\/h3\u003e\n\u003cp\u003eThe 14 high-quality LED chips deliver brighter, whiter light with lower power draw than typical halogen bulbs, improving night visibility and reducing load on the charging system. LEDs also reach full brightness instantly and resist filament breakage from vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e14 LEDs for a wider, clearer beam\u003c\/li\u003e\n  \u003cli\u003eLower current draw extends battery and charging life\u003c\/li\u003e\n  \u003cli\u003eFast start-up, no warm-up required\u003c\/li\u003e\n  \u003cli\u003eBetter vibration resistance than filament bulbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this headlight weatherproof enough for off-road use?\u003c\/h3\u003e\n\u003cp\u003eThe headlight housing is rated IP67 for water and dust protection, so it can withstand rain, mud splashes, and temporary immersion. The unit’s sealed construction and leak-resistant design make it suitable for outdoor riding in varied conditions, but avoid prolonged underwater use beyond the IP67 specification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP67-rated sealing for dust and temporary immersion\u003c\/li\u003e\n  \u003cli\u003eDurable housing resists road grime and weathering\u003c\/li\u003e\n  \u003cli\u003eEngineered gasket and seal points reduce leak risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich ATV models and brands are compatible with this lamp?\u003c\/h3\u003e\n\u003cp\u003eThe lamp is made to fit a wide range of popular 50–125cc ATVs and Chinese-built quads. It lists direct compatibility with many specific models and also fits other bikes with the same mounting spacing and 12V electrical system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommonly fits: Coolster 3125R\/3050D\/3125X, Taotao 110\/125D, Kazuma 125cc, Roketa, Baja\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with many Apollo, Kayo, Kandi, Vitacci, Nitro, RPS, Sej and similar 50–125cc ATVs\u003c\/li\u003e\n  \u003cli\u003eCheck your headlamp bolt spacing (103 mm) and 3-wire connector for a match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders and owners of small-displacement ATVs who want a durable, brighter headlight that installs easily and stands up to wet, muddy conditions. It’s a practical option for hobby riders, kids’ quad owners, rental fleets, and anyone maintaining a 50–125cc Chinese-style four-wheeler who needs a reliable replacement lamp without major wiring modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this headlight fit my ATV if it has 103 mm bolt spacing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This FVRITO lamp is designed with 103 mm center-to-center mounting bolts and fits many 50–125cc ATVs with that spacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the wiring plug compatible with standard 12V ATV systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It uses a three-wire plug for 12V systems; most installations are plug-and-play or require only basic connector matching.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55162898252119,"sku":"B095HKSS6L","price":31.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-view-headlight.jpg?v=1790339610"},{"product_id":"fvrito-pull-start-recoil-starter-for-79-100cc-ohv-engines-165mm-housing-complete-replacement-kit","title":"FVRITO Pull Start Recoil Starter for 79–100cc OHV Engines — 165mm Housing, Complete Replacement Kit","description":"\u003cp\u003e\u003cstrong\u003eThe FVRITO Pull Start Recoil Starter is a complete replacement starter assembly designed to fit 79cc–100cc small OHV clone engines used on mini bikes, go-karts, generators and other light equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement recoil starter is engineered as a direct-fit option for many common clone engines, including Predator and Harbor Freight models, and works with machines such as Coleman CT100U, CC100X, MB100 mini bikes, and small generators and pumps. The unit includes a stamped metal housing, internal plastic spool, nylon pull cord, hardware and a wrench so you can swap the old starter in one service interval. Dimensions and hole spacing are provided to confirm compatibility before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWill this starter fit my engine model?\u003c\/h3\u003e\n\u003cp\u003eThe starter is intended for a broad range of 79cc–100cc clone OHV engines used by brands like Predator, GPS, Champion and others. Fitment depends on housing diameter and bolt pattern rather than model name alone, so verify the measurements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits many Coleman CC100X, CT100U, CK100, SK100 and MB80\/MB100 style engines.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Harbor Freight Predator part numbers and similar clones.\u003c\/li\u003e\n  \u003cli\u003eCheck: outer housing diameter 165mm, inner shell 120mm, bolt spacing 150mm and 130mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eThe package arrives with the full pull-start assembly plus mounting hardware so you can replace the starter right away. A simple wrench is included, and common hand tools are sufficient for most installs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 pull start unit, 6 bolts and 1 wrench.\u003c\/li\u003e\n  \u003cli\u003eOnly three of the six supplied bolts are typically required; extra bolts serve as spares.\u003c\/li\u003e\n  \u003cli\u003eRecommend tools: screwdriver, socket set or box wrench and basic hand tools for removal and alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and easy to install is the FVRITO pull starter?\u003c\/h3\u003e\n\u003cp\u003eThe assembly uses a metal housing, synthetic rubber handle, nylon cord and a plastic internal spool for balance between durability and smooth operation. Installation is straightforward for anyone comfortable removing a few bolts and aligning the starter with the flywheel boss.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable materials: stamped metal housing and nylon pull cord resist wear.\u003c\/li\u003e\n  \u003cli\u003eSmooth rewind action from the internal plastic spool reduces binding.\u003c\/li\u003e\n  \u003cli\u003eSimple swap: aligns to existing bolt pattern and includes spare fasteners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat measurements should I confirm before buying?\u003c\/h3\u003e\n\u003cp\u003eBecause many aftermarket starters share a similar appearance but differ in key details, measure your existing starter before ordering. Verify the housing diameter and the spacing between mounting holes to ensure a correct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall metal housing diameter: 165mm (6.49\").\u003c\/li\u003e\n  \u003cli\u003eInternal plastic shell diameter: 120mm (4.72\").\u003c\/li\u003e\n  \u003cli\u003eMounting hole distances: 150mm (furthest) and 130mm (sub-distal); six holes total.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a mini bike, go-kart, small generator, water pump, pressure washer or other light equipment powered by 79cc–100cc clone OHV engines and you need a reliable, ready-to-install replacement starter, the FVRITO Pull Start Recoil Starter is a cost-effective option. It’s aimed at DIY mechanics, small-engine repair shops and fleet owners who want a straightforward aftermarket swap with included hardware. Measure your old unit carefully, and contact the seller if you need help confirming fitment before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter fit Predator 79cc and 98cc engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it fits many Predator 79cc–100cc clone engines if your housing and bolt spacing match the listed dimensions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are all mounting bolts required for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typically only three of the six supplied bolts are used; the extras are provided as replacements.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55163116945751,"sku":"B0B7G4GY1W","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-view-metal-housing.jpg?v=1790341507"},{"product_id":"fvrito-212cc-pull-start-assembly-for-predator-212-196cc-engines-metal-cover-nylon-rope-hardware","title":"FVRITO 212cc Pull Start Assembly for Predator 212\/196cc Engines — Metal Cover, Nylon Rope \u0026 Hardware","description":"\u003cp\u003e\u003cstrong\u003eFVRITO 212cc pull start assembly is a direct-replacement recoil starter kit built to fit Predator 212\/196cc and many compatible small engines used on mini bikes, go-karts, generators and more.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement pull start kit from FVRITO supplies the parts you need to restore manual starting to engines like the Predator 212 and other 6.5hp\/7.0hp small engines. The assembly combines a metal cover, durable internal components and a nylon rope with an ergonomic handle, and ships with the common mounting hardware and a spark plug so you can install and test quickly. Because these engines are used across mini bikes, go-karts, generators and outdoor power equipment, the kit is built to match multiple bolt patterns and pawl types—verify fitment before installing.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and machines will this starter work with?\u003c\/h3\u003e\n\u003cp\u003eThe FVRITO 212cc pull start is engineered to be compatible with Predator 212cc and similar 196cc Hemi and non‑Hemi engines, and many equivalents from other brands. It also fits a wide assortment of recreational vehicles and light equipment that use those engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for Predator 212\/196cc and many 6.5hp\/7.0hp engines.\u003c\/li\u003e\n  \u003cli\u003eCommon fitments include Coleman CT200U, BT200X, Trailmaster MB200 and similar minibikes and go-karts.\u003c\/li\u003e\n  \u003cli\u003eAlso appropriate for generators, snow blowers, pressure washers, tillers and water pumps using those engines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what hardware is included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic engine maintenance. The kit supplies the typical fasteners and tools you need, and the starter uses a three-hole mounting pattern—extra cover holes are cosmetic and not required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes one pull start assembly, one nylon pull cord and an ergonomic handle.\u003c\/li\u003e\n  \u003cli\u003eSupplied hardware: 6 bolts, a spark plug, a wrench and a pull start sticker.\u003c\/li\u003e\n  \u003cli\u003eThree mounting holes are used for secure installation; confirm pawl type before fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does the kit offer?\u003c\/h3\u003e\n\u003cp\u003eFVRITO built this recoil starter with longevity in mind: a metal outer cover for protection, durable internal components and a nylon rope designed to resist fraying and breakage. The handle can be removed easily for replacement or service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMetal cover shields internal components from debris and impact.\u003c\/li\u003e\n  \u003cli\u003ePlastic inner parts and reinforced nylon cord reduce wear and breakage risk.\u003c\/li\u003e\n  \u003cli\u003eReplaceable handle design improves maintenance and user comfort.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any fitment notes or precautions to know before buying?\u003c\/h3\u003e\n\u003cp\u003eConfirm the pawl (engagement) type on your engine before ordering, since not all starters share the same pawl design. Also be aware that while the cover may display extra holes, only the three designated holes are required for proper mounting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify engine model and pawl configuration for compatibility.\u003c\/li\u003e\n  \u003cli\u003eOnly three mounting holes are required—other holes are nonfunctional.\u003c\/li\u003e\n  \u003cli\u003eIf unsure, compare your old starter’s bolt pattern and engagement parts to this kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This FVRITO pull start assembly suits mechanics, DIYers and owners of mini bikes, go-karts, compact generators and other small-engine equipment who need a reliable, ready-to-install replacement. It’s ideal for users seeking a durable recoil starter that matches Predator 212\/196cc engines and many cross‑brand equivalents, and for anyone wanting hardware included for a quick swap.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my Predator 212 engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this FVRITO starter is designed for Predator 212\/196cc 6.5hp engines, but confirm your pawl type and bolt pattern before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You get the pull start assembly, nylon cord, spark plug, wrench, six bolts and a pull start sticker.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55163253588311,"sku":"B0F2T172LR","price":31.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvirtiro-front-cover-assembly.jpg?v=1790342596"},{"product_id":"fvrito-pull-start-recoil-starter-for-47-50cc-2-stroke-engines-80-120mm-mount-aluminum-housing","title":"FVRITO Pull Start Recoil Starter for 47–50cc 2‑Stroke Engines — 80\/120mm Mount, Aluminium Housing","description":"\u003cp\u003e\u003cstrong\u003eFVRITO Pull Start Recoil Starter is a replacement recoil assembly with cord and mounting hardware designed to restart 47cc–50cc 2-stroke engines on small dirt bikes, ATVs, pocket bikes, and scooters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement pull start assembly provides a straightforward way to revive a worn or broken starter on many Chinese-made 47cc–50cc 2-stroke engines. Built from aluminum alloy for the housing and supplied with a durable nylon pull cord, the unit bolts directly to the flywheel and includes the fasteners and wrench needed for installation. It fits a long list of models from brands such as SYX Moto, SSR, Coolster, Apollo, Taotao and more — but always double-check the mounting hole distances before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWill this recoil starter fit my 47cc or 50cc dirt bike?\u003c\/h3\u003e\n\n\u003cp\u003eCompatibility is broad but depends on the mounting pattern and engine type. The FVRITO assembly is intended for 2-stroke 47cc–50cc motors commonly used in pocket bikes, pit bikes, and small ATVs. Measure and compare before buying to ensure a proper fit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMounting hole distances: adjacent 3.15\" (80 mm), across 4.72\" (120 mm)\u003c\/li\u003e\n  \u003cli\u003eDesigned for 2-stroke 47cc, 49cc and 50cc engines\u003c\/li\u003e\n  \u003cli\u003eConfirmed fit for many SYX Moto, SSR SX50, Coolster, Apollo, Taotao models\u003c\/li\u003e\n  \u003cli\u003eContact seller with model photos if unsure about fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and serviceable is the FVRITO pull start?\u003c\/h3\u003e\n\n\u003cp\u003eThe starter uses an aluminum alloy housing for strength and resistance to deformation, while the included nylon cord offers smooth pull action and reliable rebound. Replacement cord is simple to install, and the package includes bolts and a wrench to make the swap quick for DIY mechanics.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy construction resists cracking and bending\u003c\/li\u003e\n  \u003cli\u003eNylon pull cord designed for good rebound and easy replacement\u003c\/li\u003e\n  \u003cli\u003eComes with 3 bolts and wrench for installation\u003c\/li\u003e\n  \u003cli\u003eSimple bolt-on repair reduces downtime and repair cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the package contents and technical specs?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit contains everything needed to install the recoil starter on a compatible engine. Technical dimensions are provided so you can verify compatibility before purchase.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 recoil starter assembly, 1 replacement pull cord\u003c\/li\u003e\n  \u003cli\u003eHardware: 3 mounting bolts and 1 installation wrench\u003c\/li\u003e\n  \u003cli\u003eSpecification: mounting hole spacing 80 mm (adjacent), 120 mm (across)\u003c\/li\u003e\n  \u003cli\u003eSuitable for many Chinese-brand pit bikes, ATVs, and scooters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain the starter assembly?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation typically requires removing the old recoil from the flywheel, aligning the new unit to the bolt pattern, and torquing the supplied bolts to secure it. Routine checks and keeping the cord clean extend service life.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRemove old assembly, clean mounting surface before fitting\u003c\/li\u003e\n  \u003cli\u003eAlign holes to 80 mm and 120 mm pattern, tighten supplied bolts\u003c\/li\u003e\n  \u003cli\u003eInspect cord for fraying; replace if wear appears\u003c\/li\u003e\n  \u003cli\u003eLubricate pivot points lightly only if manufacturer recommends\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders and home mechanics who own small 47cc–50cc 2-stroke bikes, pocket choppers, pit bikes or ATVs and need a cost-effective, bolt-on replacement starter. It's ideal for anyone with a compatible model from SYX Moto, SSR, Coolster, Apollo, Taotao and similar brands who wants a durable aluminum housing, a ready-to-install cord, and the basic hardware to complete the repair at home. If you’re unsure about fitment, provide model photos or measurements to confirm compatibility before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit my SSR SX50 or similar 50cc models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Probably if your engine is a 2-stroke 47–50cc and the mounting holes match 80mm and 120mm; confirm measurements first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bolts and tools included for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes 3 mounting bolts and a wrench plus a replacement pull cord for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55164086878551,"sku":"B0CK2JJFGN","price":31.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-pull-start-front-assembly.jpg?v=1790349965"},{"product_id":"fvrito-exhaust-muffler-silencer-for-196cc-420cc-clone-engines-chrome-1-female-thread-noise-reducing-durable-design","title":"FVRITO Exhaust Silencer for 196cc–420cc Clone Engines — Chrome, 1\" Female Thread, Noise-Reducing Durable Design","description":"\u003cstrong\u003eFVRITO exhaust muffler silencer is a chrome-plated replacement muffler designed to fit many 79cc–420cc OHV clone engines and mini bike\/go-kart applications, reducing noise while preserving engine performance.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact silencer offers a direct-fit option for a wide range of small engines commonly used on mini bikes, go-karts, generators, and pressure washers. Built with a thickened inner wall and high-temperature baking finish, it resists rust and heat while keeping useful back pressure so the engine maintains throttle response. The unit threads onto a 1\" female header and mates to a 3\/4\" muffler outlet, making installation quick for most hobbyists and small-engine mechanics.\u003c\/p\u003e\n\n\u003ch3\u003eWill this muffler fit my 196cc or 212cc Predator or similar clone engine?\u003c\/h3\u003e\n\u003cp\u003eCompatibility is broad but depends on thread size and engine layout. The muffler uses a 1\" female header thread and connects to a 3\/4\" outlet; if your engine uses that thread standard or an adapter, it will fit many Predator, GX clone, Powerhorse, Tillotson and other 79cc–420cc OHV engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 79cc–420cc OHV clone engines including Predator 196cc\/212cc\u003c\/li\u003e\n  \u003cli\u003eCommon fitment: Coleman CT200u, Massimo Baja MB200\/MB165, KT196 and similar\u003c\/li\u003e\n  \u003cli\u003eAlso usable on small generators, lawn equipment, go-karts and pressure washers\u003c\/li\u003e\n  \u003cli\u003eConfirm your exhaust pipe thread is 1\" female before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this silencer affect sound and performance?\u003c\/h3\u003e\n\u003cp\u003eThe silencer reduces overall noise without flattening the engine’s power band; its thick inner wall dampens harsh tones while leaving enough back pressure for responsive throttle. The result is a deeper, fuller low-end sound rather than a rasp or muffled, lifeless tone.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThickened inner wall reduces high-frequency noise while retaining power\u003c\/li\u003e\n  \u003cli\u003eMaintains moderate back pressure for consistent throttle response\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature finish helps avoid heat-related deterioration\u003c\/li\u003e\n  \u003cli\u003eChrome polish improves appearance without changing engine mapping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction features ensure durability?\u003c\/h3\u003e\n\u003cp\u003eThe muffler is finished with a high-temperature baking process that improves resistance to rust and heat cycling. Weld quality and chrome polishing provide corrosion protection and an OEM-style look for both restorations and upgrades.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-temp baked chrome finish for improved rust resistance\u003c\/li\u003e\n  \u003cli\u003eSolid welds and polished exterior for a professional appearance\u003c\/li\u003e\n  \u003cli\u003eThick inner wall for longevity and effective noise attenuation\u003c\/li\u003e\n  \u003cli\u003eSimple threaded design reduces leak points compared with clamp-on styles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This FVRITO muffler is intended for small-engine owners who need a reliable replacement or upgrade for mini bikes, go-karts, light-duty generators, lawn equipment and water pumps running 79cc–420cc OHV clone engines. It suits DIY mechanics, restorers and small-engine shops that require a durable, easy-to-fit silencer that tones down noise without compromising usable power. Always verify thread compatibility and snap-ring orientation before installation; contact seller support by email for fitment questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What thread size does this muffler require?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It uses a 1\" female header thread and mates to a 3\/4\" outlet; confirm your exhaust thread before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it reduce engine power?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — it reduces noise while keeping back pressure to preserve usable engine performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55164112011607,"sku":"B0BFCMCVPK","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fcrito-front-view-chrome-muffler.jpg?v=1790350267"},{"product_id":"fvrito-exhaust-muffler-silencer-for-predator-gx-clones-black-3-4-threaded-low-noise-torque-saving","title":"FVRITO Exhaust Silencer for Predator \u0026 GX Clones — Black 3\/4\" Threaded, Low-Noise \u0026 Torque-Saving","description":"\u003cp\u003e\u003cstrong\u003eFVRITO's black exhaust muffler silencer is a threaded 3\/4\" replacement designed to reduce noise and preserve low-end torque on Predator, Honda GX clones and other 79–420cc small OHV engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mini bike, go-kart, generator or lawn machine uses a common small-engine header pipe and needs a compact, durable muffler that tones down sound without killing performance, this threaded silencer is built to fit a wide range of 5.5–7hp and similar clone engines. The unit features professional welding, chrome-polished finish, and a thickened inner wall for better heat and corrosion resistance. It installs quickly onto a 1\" female-threaded adapter and keeps measured back pressure to support low-end response.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and vehicles will this muffler fit?\u003c\/h3\u003e\n\u003cp\u003eThis muffler is compatible with many small OHV engines, including Predator 196cc\/212cc\/301cc\/420cc and common GX160\/GX200 clones, plus various 79–420cc models. It also fits a long list of mini vehicles and equipment that use those engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePredator 5.5hp, 6.5hp and 7hp engines and similar clones\u003c\/li\u003e\n  \u003cli\u003eHonda GX160\/GX200\/GX240 series and certain DuroMa* 7hp engines\u003c\/li\u003e\n  \u003cli\u003eColeman CT200u, BT200x, Trail 200, Massimo Baja MB200\/MB165 go-karts and mini bikes\u003c\/li\u003e\n  \u003cli\u003eSmall generators, lawn mowers, water pumps and pressure washers using listed engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation work and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: the muffler connects to the header with a 3\/4\" threaded adapter and uses a snap ring to secure orientation. Basic hand tools are enough and the product ships ready to bolt on after verifying thread size and snap ring direction.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm your header thread matches the 1\" female \/ 3\/4\" adapter specification\u003c\/li\u003e\n  \u003cli\u003eHand-tighten and then use a wrench for final seating if required\u003c\/li\u003e\n  \u003cli\u003eCheck snap ring direction during assembly to ensure a secure seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability features does this silencer offer?\u003c\/h3\u003e\n\u003cp\u003eThe silencer uses a thickened inner wall and high-temperature baking finish to improve rust and heat resistance while reducing noise without overly restricting exhaust flow. That balance helps retain low-end torque and prevents a raspy tone.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThick interior wall for effective noise dampening and maintained back pressure\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature cured finish resists corrosion and heat discoloration\u003c\/li\u003e\n  \u003cli\u003eQuality welding and chrome polish for long-lived appearance and strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there installation tips or compatibility cautions I should know?\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, measure your exhaust pipe thread to ensure compatibility. Pay attention to the snap ring orientation during installation and contact the seller if you’re unsure about fit or fitment list details.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify thread size before purchase to avoid returns\u003c\/li\u003e\n  \u003cli\u003eObserve snap ring direction; incorrect fit can leak or loosen\u003c\/li\u003e\n  \u003cli\u003eReach out by email to the seller for fit questions or clarifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This muffler suits hobbyists and DIY mechanics who need a compact, threaded silencer for mini bikes, go-karts, compact generators, and other small-engine projects running Predator, GX clone or similar 79–420cc OHV engines. It’s a practical upgrade for anyone who wants quieter operation without sacrificing low-end power and who can confirm thread compatibility before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this muffler fit my Predator 212cc engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it fits Predator 212cc models and many 196–420cc clone engines, provided the header thread matches the muffler specification.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does installing this muffler reduce engine power?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — it is designed to lower noise while retaining low-end torque by maintaining moderate back pressure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55165556949335,"sku":"B0BFCFZKQF","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-muffler-front-view.jpg?v=1790355502"},{"product_id":"fvrito-mini-bike-exhaust-pipe-kit-for-196-224cc-engines-black-tig-welded-bolt-on-replacement","title":"FVRITO Mini Bike Exhaust Pipe Kit for 196–224cc Engines — Black, TIG-welded bolt-on replacement","description":"\u003cp\u003e\u003cstrong\u003eFVRITO Mini Bike Exhaust Pipe Kit is a bolt-on replacement exhaust designed to fit 196cc–224cc small OHV engines, delivering a durable TIG-welded pipe, gasket and mounting hardware for mini bikes, go-karts and small equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis exhaust kit offers a compact, high-quality replacement for common clone and OEM small engines such as Predator 196cc\/212cc\/224cc, Honda GX160\/GX200 style clones, Harbor Freight and Powerhorse 208 variants, and popular mini-bike platforms including Coleman CT200U, Baja Warrior models, Massimo MB200 and similar machines. The package includes the exhaust pipe, heat shield tape, gasket, fasteners and simple tools so you can swap the muffler quickly without sourcing extra parts.\u003c\/p\u003e\n\n\u003ch3\u003eWill this exhaust fit my Predator, GX or CT200U engine?\u003c\/h3\u003e\n\u003cp\u003eYes — the FVRITO kit is built to match the common flange and port sizes used on 6.5HP small OHV engines and many popular clones. Verify your engine displacement and mounting pattern against the product photos and dimensions before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Predator 196cc \/ 212cc \/ 224cc engines (non-hemi and hemi).\u003c\/li\u003e\n  \u003cli\u003eWorks on Honda GX160\/GX200-style clone engines and Powerhorse\/Harbor Freight variants.\u003c\/li\u003e\n  \u003cli\u003eFits platforms like Coleman CT200U, BT200X, KT196, Baja Warrior MB165\/MB200 and Massimo MB200.\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for some go-karts, water pumps and pressure washers using these engines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what comes in the kit?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic hand tools; the kit includes everything needed for a direct swap in most cases. The exhaust uses common flange fasteners and a pre-cut gasket, and the included wrench and hardware speed up the process.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete kit: exhaust pipe, heat-shield tape, gasket, 2 lock washers, 2 nuts, 1 wrench, 4 steel ties.\u003c\/li\u003e\n  \u003cli\u003eNo welding or fabrication required for compatible engines — just remove the old unit, fit the gasket, and bolt on the new pipe.\u003c\/li\u003e\n  \u003cli\u003eHeat-shield tape helps protect nearby wiring and components from exhaust heat.\u003c\/li\u003e\n  \u003cli\u003eCheck flange alignment and tighten hardware evenly to prevent leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance or durability changes can I expect?\u003c\/h3\u003e\n\u003cp\u003eThis pipe is manufactured with thick tubing and TIG welding to provide a robust, longer-lasting assembly versus many thin stamped muffler replacements. While every engine and application behaves differently, the construction is intended to reduce vibration and resist cracking in demanding off-road and recreational use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTIG-welded seams strengthen joints and resist fatigue under vibration.\u003c\/li\u003e\n  \u003cli\u003eThicker solid pipe material improves longevity compared with flimsy stock parts.\u003c\/li\u003e\n  \u003cli\u003eHeat-shield tape and included fasteners promote secure, reliable mounting.\u003c\/li\u003e\n  \u003cli\u003eDesigned for recreational engines — check local noise regulations before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The FVRITO Mini Bike Exhaust Pipe Kit is aimed at hobbyists, mini-bike and go-kart owners, small-engine mechanics and fleet owners who need a reliable replacement or upgrade for 6.5HP-class OHV engines. It’s a good option if you want a ready-to-install, rugged exhaust for Coleman CT200U, Predator clones, GX160\/GX200-style engines or compatible recreational equipment without fabricating adapters. Before purchase, compare your engine’s mounting pattern and port size to the product images and ask the seller questions if you’re unsure.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this exhaust fit Predator 212cc engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit is compatible with Predator 196cc\/212cc\/224cc clone engines—confirm flange and port size against the product images.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are mounting bolts and gasket included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes a gasket, nuts, lock washers, a wrench, steel ties and heat-shield tape for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55165618356567,"sku":"B0CGTGJ1M9","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-exhaust-front-view.jpg?v=1790356444"},{"product_id":"fvrito-9x3-50-4-tire-inner-tube-bent-valve-stem-9x3-1-2-compact-atv-go-kart-wheel-kit","title":"FVRITO 9x3.50-4 Tyre \u0026 Inner Tube — Bent Valve Stem, 9x3-1\/2 Compact ATV\/Go-Kart Wheel Kit","description":"\u003cp\u003e\u003cstrong\u003eFVRITO 9x3.50-4 tire with matching inner tube is a direct-replacement wheel assembly for mini ATVs, go-karts, petrol\/electric scooters, and garden equipment that restores grip and air retention quickly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact tire-and-tube set combines a 9\" diameter, 3.50\" width tire with a 4\" rim fit and a bent-valve inner tube, plus valve cores, caps, and a wrench for straightforward installation. It’s designed for common small-vehicle uses — from 49cc mini quads and go-karts to gas skateboards, mini choppers, and lawn tractors — where a reliable, serviceable wheel is needed. Before purchasing, verify the size markings on your existing tire and rim to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm the 9x3.50-4 will fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eMeasure your current tire sidewall and rim: the tire diameter should be about 9 inches, width roughly 3.5 inches, and rim diameter 4 inches. Check the valve stem orientation and type (bent valve stem included) against your rim’s valve hole to ensure the assembly aligns properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare markings: look for 9x3.50-4 or 9x3-1\/2 on the tire sidewall.\u003c\/li\u003e\n  \u003cli\u003eConfirm rim inner diameter: 4 inches required.\u003c\/li\u003e\n  \u003cli\u003eCheck valve hole angle: bent valve stem supplied for angled rims.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what tools do I get?\u003c\/h3\u003e\n\u003cp\u003eThe set includes one tire, one inner tube with a bent valve stem, three valve caps (one red, two black), two spare brass valve cores, and a small valve-core wrench. These parts let you mount the tire, seat the bead, and service the valve without needing a separate kit for basic installations and repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x tire, 1 x inner tube with bent valve stem included.\u003c\/li\u003e\n  \u003cli\u003e1 red and 2 black valve caps to protect stems and aid color coding.\u003c\/li\u003e\n  \u003cli\u003e2 extra brass valve cores and a wrench for quick maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this tire affect performance and durability?\u003c\/h3\u003e\n\u003cp\u003eThe compact 9x3.50-4 profile is built for stability and manageable handling on light off-road and paved surfaces typical of small ATVs and utility equipment. While not a heavy-duty tractor tire, it balances traction and ride comfort for low-speed work and recreational use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTread designed for mixed surfaces common to yard work and light trails.\u003c\/li\u003e\n  \u003cli\u003eInner tube with bent valve helps maintain air seal on angled rims.\u003c\/li\u003e\n  \u003cli\u003eReplacement parts included reduce downtime after punctures or wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install this tire myself or should I go to a shop?\u003c\/h3\u003e\n\u003cp\u003eAnyone familiar with small-tire mounting can fit this assembly at home using basic tools and a pump; the package includes a valve-core wrench and extra cores for convenience. If you’re unsure about seating the bead or balancing the wheel, a quick shop visit ensures safe, even installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHome install feasible with tire irons and a floor pump or compressor.\u003c\/li\u003e\n  \u003cli\u003eValve-core wrench simplifies inserting or replacing cores during installation.\u003c\/li\u003e\n  \u003cli\u003eProfessional mounting recommended if you lack tire-mounting tools or experience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FVRITO 9x3.50-4 tire and inner tube set suits owners of small recreational and utility vehicles — including 49cc mini ATVs, mini quads, go-karts, petrol or electric scooters, gas skateboards, mini choppers, lawnmowers, and small garden tractors — who need a straightforward, serviceable replacement wheel that restores reliable air retention and functional traction. Confirm measurements and valve orientation before ordering to ensure a correct fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 9x3.50-4 tire tubeless or requires an inner tube?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This product is a tire-and-inner-tube set; it requires and includes the inner tube supplied with a bent valve stem.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit a 4-inch rim on a go-kart?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this tire is sized for a 4-inch rim diameter; confirm your rim and tire sidewall read 9x3.50-4 before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55166010130775,"sku":"B08RZ9L9QV","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-packaging-9x3-50-4.jpg?v=1790361118"},{"product_id":"fvrito-recoil-starter-kit-for-47-50cc-2-stroke-engines-black-alloy-includes-ignition-coil-spark-plug","title":"FVRITO Recoil Starter Kit for 47–50cc 2-Stroke Engines — Black Alloy, Includes Ignition Coil \u0026 Spark Plug","description":"\u003cp\u003e\u003cstrong\u003eThe FVRITO Alloy Easy Pull Recoil Starter is a complete replacement starter and ignition coil kit designed to restore fast, reliable hand-start operation to 47cc–50cc 2-stroke mini ATVs, go-karts, and pit bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your small-engine vehicle uses a manual recoil start and it's become stiff, inconsistent, or nonfunctional, this kit supplies the core components to get it turning again. Made from aluminum with a black finish, the assembly includes the pull-start housing and hardware plus an ignition coil, spark plug, fuel filter and basic tools so you can complete a straightforward swap on many Chinese-brand 2-stroke engines.\u003c\/p\u003e\n\n\u003ch3\u003eWill this starter fit my 47cc–50cc 2-stroke mini ATV or pocket bike?\u003c\/h3\u003e\n\u003cp\u003eThe kit is built to match common mounting patterns used across many Chinese-made small engines and aftermarket minis. Before ordering, compare the mounting hole measurements and the general shape with your existing starter to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 2-stroke 47cc, 49cc, 50cc engines.\u003c\/li\u003e\n  \u003cli\u003eMounting holes: 3 total; adjacent spacing 3.15\" (80 mm).\u003c\/li\u003e\n  \u003cli\u003eAcross-hole spacing: 4.72\" (120 mm) — verify against your unit.\u003c\/li\u003e\n  \u003cli\u003eCommon fits: Taotao, Coolster, SSR, MotoTec, Pitster Pro and many Chinese brands.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components come in the package and what tools are included?\u003c\/h3\u003e\n\u003cp\u003eThis purchase is a multi-piece replacement set intended to cover the basics for a starter and ignition refresh. The package is useful when you want a fast swap without hunting down separate parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x alloy pull-start\/recoil assembly in black.\u003c\/li\u003e\n  \u003cli\u003e1 x ignition coil and 1 x spark plug for basic ignition setup.\u003c\/li\u003e\n  \u003cli\u003e1 x fuel filter to replace the inline screen and keep fuel clean.\u003c\/li\u003e\n  \u003cli\u003e3 x mounting bolts and 1 x wrench included for installation convenience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and easy to install is the FVRITO starter?\u003c\/h3\u003e\n\u003cp\u003eThe housing is aluminum, which keeps weight down while resisting corrosion and wear from regular use. Installation is intended to be straightforward for anyone comfortable with basic hand tools and small-engine maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloy body for improved heat resistance and lighter weight.\u003c\/li\u003e\n  \u003cli\u003eBlack finish for rust protection and a clean look.\u003c\/li\u003e\n  \u003cli\u003eIncludes bolts and wrench to simplify the swap-out process.\u003c\/li\u003e\n  \u003cli\u003eBasic mechanical skill recommended; wiring the ignition coil follows standard small-engine practice.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying to avoid fitment issues?\u003c\/h3\u003e\n\u003cp\u003eBecause small engines vary, a quick measurement and visual check will prevent returns. Compare the pictured starter and the listed hole spacings to your unit, and contact the seller if you have doubt about a fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure the three mounting hole distances on your machine before purchasing.\u003c\/li\u003e\n  \u003cli\u003eConfirm your engine is a 2-stroke 47–50cc configuration.\u003c\/li\u003e\n  \u003cli\u003eReview the product photos and compare overall shape and cable routing to your original starter.\u003c\/li\u003e\n  \u003cli\u003eContact customer support if you need fitment guidance prior to ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FVRITO Alloy Easy Pull Recoil Starter Kit is suited for owners and hobby mechanics who maintain small 2-stroke engines on mini ATVs, go-karts, pit bikes, and pocket rockets from Taotao, Coolster, SSR, MotoTec and similar Chinese makers. It's a practical choice when the original recoil is worn or the ignition coil needs replacing and you want a single, economical kit that includes the starter housing, coil, spark plug, fuel filter and mounting hardware. If you prefer plug-and-play electronic starters or if your engine’s mounting pattern differs from the listed dimensions, verify fitment or seek a model-specific part. For standard 47–50cc 2-stroke maintenance and do-it-yourself repairs, this kit provides the essential parts to get your machine back to hand-starting service.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter fit my 49cc pocket bike?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Likely yes if your bike is a 2-stroke 47–50cc. Compare the mounting hole spacings (80 mm and 120 mm) and overall shape before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are installation tools included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes three bolts and a wrench, plus basic hardware and parts like the spark plug and fuel filter.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55166077043031,"sku":"B094FDWGDS","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-view-pull-start-assembly.jpg?v=1790362341"},{"product_id":"fvrito-28mm-1-1-muffler-for-50-125cc-pit-bikes-aluminum-clamp-gaskets-deepens-exhaust-tone","title":"FVRITO 28mm (1.1\") Silencer for 50–125cc Pit Bikes – Aluminium, Clamp \u0026 Gaskets, Deepens Exhaust Tone","description":"\u003cp\u003e\u003cstrong\u003eFVRITO's 1.1\" (28mm) muffler is a direct-fit replacement designed to reduce harsh stock noise and deliver a deeper, more controlled exhaust tone for 50–125cc four-stroke pit bikes, ATVs and quads.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis lightweight aluminum muffler is built as a complete kit with clamp and gaskets to create a sealed connection and withstand off-road vibration. It suits many popular Chinese and small-displacement models—SSR, TaoTao, Coolster and comparable 50cc–125cc machines—offering a simple slide-on installation for riders who want a calmer sound, improved ride feel, and a durable exhaust solution without complex modifications.\u003c\/p\u003e\n\n\u003ch3\u003eWhich bikes and ATVs will this 28mm muffler fit?\u003c\/h3\u003e\n\u003cp\u003eThe FVRITO 1.1\" muffler is sized for 28mm outlet pipes and is compatible with a broad range of small-displacement four-stroke vehicles. It is intended for many 50cc–125cc pit bikes, dirt bikes, and Chinese quad models, but always confirm pipe diameter and clearance before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits: TaoTao models (ATA-125D, ATA-110 and variants), Coolster 110\/125 (3050 series), SSR 110\/125.\u003c\/li\u003e\n  \u003cli\u003eAlso fits many Apollo, X-pro, Kazuma, Icebear, Vitacci, Baja, and similar machines.\u003c\/li\u003e\n  \u003cli\u003eNotable exclusions: specific model exceptions such as Apollo RFZ 125 and some CRF\/XR variants—measure your outlet first.\u003c\/li\u003e\n  \u003cli\u003eWorks with most 4-stroke engines having a 28mm (1.1\") exhaust pipe diameter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this muffler change the sound and ride feel?\u003c\/h3\u003e\n\u003cp\u003eDesigned to mellow out an overly bright or raspy stock exhaust, this muffler produces a deeper, more pleasant acoustic profile while helping riders perceive smoother throttle response. It focuses on tone refinement rather than power increases, so you get a better auditory experience without complex engine tuning.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSoftens high-frequency noise into a fuller, lower pitch.\u003c\/li\u003e\n  \u003cli\u003eEnhances perceived engine smoothness and rider connection.\u003c\/li\u003e\n  \u003cli\u003eDoes not require engine modification for basic installation.\u003c\/li\u003e\n  \u003cli\u003eMaintains reliable backpressure suitable for stock four-stroke setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is included and how difficult is installation?\u003c\/h3\u003e\n\u003cp\u003eThis muffler ships as a complete replacement kit: the aluminum muffler body plus an exhaust clamp and gaskets for an airtight joint. The slide-on design keeps the install straightforward, making it a good DIY swap for owners with basic hand tools and mechanical familiarity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: muffler, clamp, and sealing gaskets.\u003c\/li\u003e\n  \u003cli\u003eInstallation: slide-on fitment with clamp tightening; basic hand tools required.\u003c\/li\u003e\n  \u003cli\u003eTime: typical install time is short—often under an hour for experienced hobbyists.\u003c\/li\u003e\n  \u003cli\u003eTip: verify pipe diameter and clearance to avoid interference with frame or footpegs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the muffler durable enough for off-road use?\u003c\/h3\u003e\n\u003cp\u003eConstructed from sturdy aluminum and paired with vibration-resistant hardware, the FVRITO muffler is built to handle the rigors of off-road riding. Its clamp-and-gasket system helps keep the connection sealed under bouncing and impacts common to trail and track use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum body for corrosion resistance and light weight.\u003c\/li\u003e\n  \u003cli\u003eClamp and gaskets provide a secure, sealed joint.\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist vibration and maintain fit on rough terrain.\u003c\/li\u003e\n  \u003cli\u003eReplaceable components simplify maintenance and future swaps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders with 50cc–125cc four-stroke pit bikes, quads or ATVs who want to reduce shrill stock noise and gain a fuller exhaust tone without complex tuning. It suits mechanics and DIY owners who need a reliable, easy-to-install replacement muffler compatible with many Chinese-brand machines such as TaoTao, Coolster, SSR, Apollo and similar models. Measure your exhaust outlet (28mm\/1.1\") and check model compatibility before purchase to ensure a correct fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my TaoTao 110?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your TaoTao has a 28mm (1.1\") exhaust outlet, this muffler is compatible; verify clearance and model specifics before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the muffler increase engine power?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—it's designed to refine exhaust tone and reduce noise rather than add horsepower or major performance changes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55166106829143,"sku":"B092H1N6C3","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-muffler-front-view_f1566cfc-58a6-4012-9a41-fc927f7b7fc6.jpg?v=1790363107"},{"product_id":"fvrito-16x3-0-inner-tubes-tr87-bent-valve-2-pack-heavy-duty-rubber-spare-cores-caps","title":"FVRITO 16x3.0 Inner Tubes TR87 Bent Valve 2-Pack — heavy‑duty rubber, spare cores \u0026 caps","description":"\u003cp\u003e\u003cstrong\u003eFVRITO 16x3.0 inner tubes with TR87 angled valve stems are replacement tubes designed to fit 16x3.00–3.50 tires on small electric bikes, scooters, mopeds, trikes and folding bikes, sold here as a 2‑pack with valve accessories.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you ride compact electric vehicles, kids’ chopper bikes or folding frames, getting a reliable inner tube in the right size and valve style matters for easy repairs and steady air retention. These tubes are manufactured from heavy‑duty rubber, include bent TR87 valve stems that clear rims and forks, and ship with spare cores and caps to make roadside fixes quicker. The pack is built so one purchase covers two wheels plus extra valve parts for future use.\u003c\/p\u003e\n\n\u003ch3\u003eWill this tube fit my 16‑inch tire and rim combination?\u003c\/h3\u003e\n\u003cp\u003eThese inner tubes are sized for 16x3.00 tires and stretch to fit 16x3.25 and 16x3.50 widths, matching rims commonly found on e‑bikes, electric scooters and small mopeds. Always check your tire sidewall and rim diameter before ordering to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSizes compatible: 16x3.00, 16x3.25, 16x3.50\u003c\/li\u003e\n  \u003cli\u003eRim diameter match: 12 inches rim listed for common fit — verify rim marking\u003c\/li\u003e\n  \u003cli\u003eValve type: TR87 bent valve stem for constrained rim or fork clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the TR87 angled valve stem helpful for compact wheels?\u003c\/h3\u003e\n\u003cp\u003eA bent TR87 valve stem positions the valve at a convenient angle so pumps and pressure gauges attach easily even when rim holes or mounting hardware block straight access. The included red aluminum caps and spare valve cores reduce the chance of getting stranded with a lost or damaged cap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAngled valve provides easier pump attachment in tight wheel wells\u003c\/li\u003e\n  \u003cli\u003eRed aluminum caps for visibility and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eSpare brass cores included for quick field replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and accessories come with the tubes?\u003c\/h3\u003e\n\u003cp\u003eThe tubes are molded from premium heavy‑duty rubber intended to resist punctures and hold air under normal riding loads. The package adds practical repair items so you can replace cores or swap caps without running to a shop.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: durable, thick rubber for longevity\u003c\/li\u003e\n  \u003cli\u003ePackage contents: 2 inner tubes, 2 red caps, 2 black caps, valve core wrench, 5 brass valve cores\u003c\/li\u003e\n  \u003cli\u003eDesigned for both home repairs and small commercial fleets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain these inner tubes?\u003c\/h3\u003e\n\u003cp\u003eInstall the tube by partially inflating it, seating it into the tire, then mounting the tire on the rim and fully inflating to the recommended pressure. Keep spare cores and the small wrench handy; replacing a core or cap is a simple five‑minute task that prevents slow leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTip: pre‑inflate slightly to avoid pinching during installation\u003c\/li\u003e\n  \u003cli\u003eUse the included wrench to tighten or replace valve cores as needed\u003c\/li\u003e\n  \u003cli\u003eCheck pressure regularly and inspect for embedded debris to prolong tube life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders and fleet managers who need robust replacement tubes for small e‑bikes, electric scooters, kids’ choppers, tadpole trikes, folding bikes and similar compact vehicles. This 2‑pack with spare cores and caps is ideal for parents, repair shops, delivery services and anyone who wants to keep two wheels fully stocked for quick roadside repairs. If your vehicle uses a 16x3.x tube and would benefit from an angled TR87 valve stem for easier pump access, this FVRITO kit is a practical, ready‑to‑use option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these tubes fit 16x3.5 tires?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are compatible with 16x3.00, 16x3.25 and 16x3.50 tire widths—confirm your tire sidewall size before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are valve cores and caps included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The pack includes five brass valve cores, two red and two black valve caps, plus a valve core wrench.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55166187274583,"sku":"B08YJ8YSYP","price":37.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvlrito-front-packaging-2pack.jpg?v=1790364742"},{"product_id":"fvrito-mini-bike-gas-tank-kit-for-predator-212-gx160-engines-3-0l-metal-replacement-with-stainless-cap-filter","title":"FVRITO Mini Bike Fuel Tank Kit for Predator 212\/GX160 Engines — 3.0L Metal Replacement with Stainless Cap \u0026 Filter","description":"\u003cp\u003e\u003cstrong\u003eFVRITO Mini Bike Gas Tank Kit is a 3.0L metal fuel tank assembly engineered to replace worn or leaking Predator 212 \/ GX160-style tanks on mini bikes, go-karts and compatible small engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete replacement kit gives you a durable metal fuel reservoir, stainless-steel cap, fuel line, filter components and mounting hardware sized for Predator 212 \/ GX160 family engines and many OHV clone engines. It’s built to resist corrosion and reduce fuel seepage compared with older plastic tanks, and includes everything needed for a straightforward swap or repair.\u003c\/p\u003e\n\n\u003ch3\u003eWill this tank fit my Predator 212, GX160 or similar engine?\u003c\/h3\u003e\n\u003cp\u003eYes — the FVRITO tank is designed for a wide range of 212cc and related small OHV engines. It matches common mounting points and fuel outlet arrangements used on many mini bikes, go-karts and small equipment that accept Predator-style tanks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible engine listings: Predator 224cc \/ 212cc \/ 196cc \/ 173cc, GX200, GX160, GX140 clones.\u003c\/li\u003e\n  \u003cli\u003eUsed on models like Coleman CT200U, BT200X, Massimo\/Baja MB165\/MB200 and many mini-bike\/go-kart frames.\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM part numbers: 17510-ZE1-030ZA, 17510-ZE1-020ZA, 17510-Z0T-010ZC.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and capacity does the tank offer?\u003c\/h3\u003e\n\u003cp\u003eThe tank is fabricated from coated metal for improved longevity and lower fuel permeability versus typical plastic tanks. It holds approximately 3.0 liters (0.79 gallons), balancing compact size with usable run time for small-engine machines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3.0 L \/ 0.79 gal fuel capacity for extended runtime between refuels.\u003c\/li\u003e\n  \u003cli\u003eMetal construction resists external abrasion and reduces leakage risk.\u003c\/li\u003e\n  \u003cli\u003ePolished stainless-steel cap for corrosion resistance and a tight seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich parts come in the kit and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes the tank and all common components needed for installation so you won’t need to hunt for small parts. Basic hand tools are typically sufficient for removal of the old tank and mounting the FVRITO assembly; installation time varies by vehicle but is generally straightforward for anyone comfortable with small-engine maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: fuel tank assembly, stainless cap, fuel line, clips, joint filter, filter screen and fastening hardware.\u003c\/li\u003e\n  \u003cli\u003eFilter screen and card buckle supplied to secure clean fuel flow to the carburetor.\u003c\/li\u003e\n  \u003cli\u003eMounting uses standard nuts\/screw points compatible with Predator-style brackets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this tank improve reliability and maintenance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a brittle or leaking tank with this metal assembly reduces the chance of fuel drips and contamination, and the supplied filter elements help keep debris out of the carburetor. The robust cap and fittings make routine filling, storage and inspections easier and cleaner.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMetal body reduces long-term fuel seepage and damage from impacts.\u003c\/li\u003e\n  \u003cli\u003eCap prevents dust and moisture intrusion during storage and use.\u003c\/li\u003e\n  \u003cli\u003eIncluded fuel filter and screen protect the fuel system from particulates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This FVRITO 3.0L mini bike gas tank kit is intended for owners, mechanics and hobbyists who maintain or restore mini bikes, go-karts, small generators and other equipment powered by Predator-style or GX-series small engines. It suits anyone upgrading a cracked, leaking or missing tank and who wants a ready-to-install metal replacement with matching hardware and filtration components.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this tank fit Predator 212 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The FVRITO tank is compatible with Predator 212 and related GX-series clone engines and replaces the listed OEM part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the fuel capacity of the tank?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The metal tank holds 3.0 liters (0.79 gallons), providing longer run time between refills.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55166615028055,"sku":"B08R6PNCHX","price":53.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-view-metal-fuel-tank.jpg?v=1790369090"},{"product_id":"fvrito-inner-tubes-18x8-50-8-18x9-50-8-2-pack-tr-13-straight-valve-heavy-duty-rubber-for-atvs-mowers","title":"FVRITO inner tubes 18x8.50-8 \/ 18x9.50-8 2-pack — TR-13 straight valve, heavy-duty rubber for ATVs \u0026 mowers","description":"\u003cp\u003e\u003cstrong\u003eFVRITO replacement inner tubes 18x8.50-8 and 18x9.50-8 are heavy‑duty, universal rubber tubes with TR‑13 straight valve stems sold in a 2‑pack for 8\" rims.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pair of inner tubes is designed for a wide range of small off‑road and utility equipment — from ATVs, quads and go‑karts to lawn mowers, garden trailers and snow blowers. Built from premium rubber and supplied with multiple valve cores, valve caps and a core wrench, the kit aims to make tire repairs fast and dependable whether you're maintaining a backyard mower or prepping a utility trailer.\u003c\/p\u003e\n\n\u003ch3\u003eWill these inner tubes fit my tire and wheel?\u003c\/h3\u003e\n\u003cp\u003eThese tubes are marked for 18x8.50‑8 and 18x9.50‑8 tires and are intended to work on compatible 8\" rims. Because tube sizing can vary by manufacturer, they are listed as universal for several related sizes; verify your tire sidewall and rim diameter before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible tire sizes: 18x6.50‑8, 18x7.50, 18x8.50‑8, 18x9.50‑8\u003c\/li\u003e\n  \u003cli\u003eDesigned for 8\" rim diameter\u003c\/li\u003e\n  \u003cli\u003eTR‑13 straight valve stem fits standard valve access holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these tubes for heavy or commercial use?\u003c\/h3\u003e\n\u003cp\u003eFVRITO inner tubes are molded from heavy‑duty rubber intended to resist punctures and flexing during normal use. They are suitable for home, professional landscaping, and light commercial applications where regular durability is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium rubber compound for toughness and elasticity\u003c\/li\u003e\n  \u003cli\u003eReinforced valve area to reduce leak risk\u003c\/li\u003e\n  \u003cli\u003eTwo tubes per package for quicker swaps and spare coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hardware and accessories come with the 2‑pack?\u003c\/h3\u003e\n\u003cp\u003eThe kit is supplied ready to install: two inner tubes, valve caps in red and black, extra valve cores, and a core wrench to speed installation or replacement. These extras reduce the need for immediate additional purchases when servicing a tire.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 x inner tubes (18x8.50‑8 \/ 18x9.50‑8 compatible)\u003c\/li\u003e\n  \u003cli\u003e2 x red aluminum valve caps and 2 x black caps for identification\u003c\/li\u003e\n  \u003cli\u003e1 x valve core wrench and 5 x brass valve cores included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstalling the tubes follows standard tire‑and‑tube procedures: partially seat the tire bead, insert the deflated tube, align the straight TR‑13 valve stem, then fully seat and inflate to the manufacturer’s recommended pressure. Routine checks of valve cores and tire pressure will extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eValve core wrench included for quick tightening or replacement\u003c\/li\u003e\n  \u003cli\u003eStraight TR‑13 valve allows easy pumping and pressure checks\u003c\/li\u003e\n  \u003cli\u003eSpare cores and caps make roadside fixes straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The FVRITO 18x8.50‑8 \/ 18x9.50‑8 inner tube 2‑pack is aimed at owners and operators of small utility vehicles and equipment who need reliable replacement tubes: ATV and go‑kart riders, landscapers and lawn‑care professionals, gardeners with trailers or wheelbarrows, plus DIYers maintaining snow blowers, generators and other wheeled machinery. If you want a ready‑to‑install set with spare parts that fits common 8\" rims, this kit provides an economical, practical option without specialty ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these inner tubes compatible with 8-inch rims?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the tubes are designed for 8\" rims and compatible with several 18\" tire widths listed on the sidewall.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the 2‑pack kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes two tubes, red and black valve caps, five brass valve cores, and a valve core wrench for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55166634328407,"sku":"B094QXRHSR","price":54.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-packaging-view.jpg?v=1790369246"},{"product_id":"fvrito-replacement-atv-gas-tank-110-125cc-fit-for-tao-tao-coolster-abs-with-vented-cap","title":"FVRITO replacement ATV fuel tank — 110–125cc fit for Tao Tao\/Coolster, ABS with vented cap","description":"\u003cp\u003e\u003cstrong\u003eFVRITO replacement ATV gas tank built from durable ABS plastic, sized for many 50–125cc Chinese quads including Tao Tao and Coolster models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis aftermarket fuel tank is a direct-fit replacement designed for small off-road four-wheelers. Constructed from rigid ABS plastic, it includes a vented cap, fuel filter, hose and mounting clips so you can replace a cracked or leaking tank with a complete, ready-to-install unit. Dimensions and mounting hole spacing are provided to help confirm compatibility before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWill this tank fit my 110cc or 125cc ATV?\u003c\/h3\u003e\n\n\u003cp\u003eThe tank fits many popular Chinese-brand ATVs in the 50–125cc range, but compatibility depends on your specific model and mounting layout. Check the mounting hole distance and overall dimensions against your original tank to ensure a proper match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounting hole distance: 255 mm (10.04 in)\u003c\/li\u003e\n  \u003cli\u003eTank length: 270 mm (10.63 in)\u003c\/li\u003e\n  \u003cli\u003eTank width: 170 mm (6.69 in)\u003c\/li\u003e\n  \u003cli\u003eTank height: 210 mm (8.27 in)\u003c\/li\u003e\n  \u003cli\u003eCommon compatible brands: TaoTao, Coolster, Roketa, BMS, Sunl and many more\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and parts are included with the tank?\u003c\/h3\u003e\n\n\u003cp\u003eThe FVRITO fuel tank is molded from hard ABS plastic that resists cracking and provides a tight seal to reduce leaks. The package contains the main tank plus the essentials you need to install and run it right away.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x ABS plastic gas tank\u003c\/li\u003e\n  \u003cli\u003e1 x vent-cap gas tank cap\u003c\/li\u003e\n  \u003cli\u003e1 x inline fuel filter\u003c\/li\u003e\n  \u003cli\u003e1 x fuel line and 4 mounting clips\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I check before buying?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic ATV maintenance: drain old fuel, remove the old tank, mount the new one and reconnect the line and fittings. Still, verify fitment dimensions and hose connections before purchasing to avoid returns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm the 255 mm mounting hole spacing on your chassis\u003c\/li\u003e\n  \u003cli\u003eCompare tank length, width and height to your existing tank\u003c\/li\u003e\n  \u003cli\u003eInspect fuel line diameter and filter placement compatibility\u003c\/li\u003e\n  \u003cli\u003eHave basic hand tools ready and work with an empty fuel system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and leak-resistant is the replacement tank?\u003c\/h3\u003e\n\n\u003cp\u003eMade from heavy-duty ABS plastic, the tank is designed to withstand vibration, impacts and the chemical exposure from gasoline. The molded design and included cap and clips help minimize leaks when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSturdy ABS construction reduces risk of cracking\u003c\/li\u003e\n  \u003cli\u003eIncluded vented cap helps prevent pressure build-up\u003c\/li\u003e\n  \u003cli\u003eFuel filter and hose supplied for reliable flow and sealing\u003c\/li\u003e\n  \u003cli\u003eUse proper clamps and torque to ensure a tight fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This FVRITO gas tank is intended for owners of smaller Chinese-manufactured ATVs and buggies (roughly 50–125cc) who need a full replacement kit—whether replacing a damaged original tank or upgrading worn components. It’s best for riders who can verify mounting dimensions and handle basic installation; mechanics and DIY enthusiasts will appreciate the included parts for a fast swap.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this tank include the cap and fuel hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes a vented gas cap, fuel line, inline filter and four mounting clips.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the exact tank dimensions I should check?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Measure mounting hole spacing 255 mm, tank length 270 mm, width 170 mm and height 210 mm.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55166734991703,"sku":"B08ZJ5XXX9","price":50.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-profile-gas-tank.jpg?v=1790370979"},{"product_id":"fvrito-13x5-00-6-inner-tubes-4-pack-heavy-duty-thick-rubber-with-tr87-bent-valve-stems","title":"FVRITO 13x5.00-6 Inner Tubes 4-Pack — Heavy-Duty Thick Rubber with TR87 Bent Valve Stems","description":"\u003cp\u003e\u003cstrong\u003eFVRITO 13x5.00-6 inner tube is a heavy-duty replacement tube designed to fit 6\" rims and a 13\" tire diameter for small ATVs, Razor Dirt Quads (versions 1–18), go-karts, lawn equipment and utility carts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis set of four inner tubes offers a durable, ready-to-install option when a punctured or aging tube needs replacement. Constructed from premium thick rubber, the tubes include angled TR87 bent valve stems for easier inflation and come with spare valve cores, metal valve caps and a core removal tool so you have everything needed for a straightforward swap. Compatible sizes and common fitments are listed to help you confirm fit before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWill these tubes fit my vehicle or equipment?\u003c\/h3\u003e\n\u003cp\u003eThese tubes are sized for a 13x5.00-6 tire and a 6-inch rim, and they also suit several equivalent tire designations. Check your equipment's tire markings or owner's manual to match the size before installing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrimary size: 13x5.00-6 for 6\" rims and 13\" tire outside diameter.\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with: 13X5.00-6, 12X5.00-6, 145\/70-6, 5.30-6, 4.50-6, 5.00-6.\u003c\/li\u003e\n  \u003cli\u003eCommon fitments: small ATVs, Razor Dirt Quad (versions 1–18), go-karts, lawn mowers, wheelbarrows, wagons.\u003c\/li\u003e\n  \u003cli\u003eVerify tire sidewall numbers to ensure correct match before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools are included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be straightforward: the angled TR87 valve stem simplifies access for inflating, and the package contains several accessories to finish the job without extra parts. Users should still follow proper tube mounting procedures to avoid pinching or misalignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 4 inner tubes, 4 red valve caps, 4 black valve caps, 1 valve core wrench, 5 brass valve cores.\u003c\/li\u003e\n  \u003cli\u003eAngled TR87 bent valve stem allows easier pump access in tight wheel wells.\u003c\/li\u003e\n  \u003cli\u003eSpare valve cores and caps help with future repairs and sealing.\u003c\/li\u003e\n  \u003cli\u003eUse tire levers and proper lubrication (not included) for safe mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat construction and durability features do these tubes offer?\u003c\/h3\u003e\n\u003cp\u003eFVRITO inner tubes are made from thicker rubber intended for frequent use in home, professional, and light commercial settings. The material emphasizes resistance to wear, punctures, and water exposure while keeping the tube relatively lightweight for handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium thick rubber improves durability and resistance to abrasion.\u003c\/li\u003e\n  \u003cli\u003eDesigned to roll smoothly and reduce lifting effort compared with heavier alternatives.\u003c\/li\u003e\n  \u003cli\u003eAngled valve and included maintenance accessories extend service life.\u003c\/li\u003e\n  \u003cli\u003eSuitable for both recreational and utility applications where reliability matters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This FVRITO 13x5.00-6 inner tube set is intended for owners and maintenance technicians of small off-road vehicles and yard equipment who need a dependable replacement option. It's well-suited to Razor Dirt Quad users (versions 1–18), small ATVs, go-karts, lawn tractors, hand trucks, wagons, pressure washer and generator wheels, snow blowers and other garden or light industrial machines that accept a 6\" rim and 13\" tire diameter. If you want a plug-and-play replacement kit that includes spare valve parts and a core tool, this 4-pack covers multiple wheels and future repairs while keeping downtime low.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this tube fit Razor Dirt Quad versions 1–18?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 13x5.00-6 tube is listed as compatible with Razor Dirt Quad versions 1–18; confirm your tire sidewall matches 13x5.00-6.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What accessories are included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes 4 inner tubes, 8 valve caps (red and black), a valve core wrench and 5 brass valve cores.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55166800658775,"sku":"B0D5YHJ8VD","price":52.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-view-tube-packaging.jpg?v=1790371413"},{"product_id":"fvrito-rear-brake-master-cylinder-caliper-assembly-for-50-125cc-atvs-black-complete-kit-with-hose-spare-pad","title":"FVRITO Rear Brake Master Cylinder \u0026 Caliper Assembly for 50–125cc ATVs — Black, Complete Kit with Hose \u0026 Spare Pad","description":"\u003cp\u003e\u003cstrong\u003eFVRITO's rear brake master cylinder and caliper assembly is a complete replacement kit designed to restore stopping performance on 50cc–125cc Chinese ATVs and mini quads.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your ATV's rear brake is spongy, leaking, or missing components, this all-in-one assembly bundles the master cylinder, caliper, hoses, an extra pad, cable ties and a fuel filter so you can install a functioning brake system quickly. Engineered to match mounting patterns used by many popular Chinese makes and models, the assembly reduces the hassle of sourcing individual parts and provides the essential dimensions to confirm fitment before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this rear brake assembly fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is made to suit a wide range of 50cc through 125cc Chinese ATVs, quads and mini 4-wheelers. It lists compatibility with Taotao, Coolster, Kazuma and many other common brands, but you should verify hole spacing and mounting details for a final fit check.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits: Taotao Boulder B1, Coolster 3050C\/3125R series, Kazuma 125, Apollo and similar models\u003c\/li\u003e\n  \u003cli\u003eEngine sizes covered: 50cc, 70cc, 90cc, 110cc, 125cc\u003c\/li\u003e\n  \u003cli\u003eBrands included: Roketa, Sunl, MotoTec, ICEbear, Baja, KAYO, Lifan and more\u003c\/li\u003e\n  \u003cli\u003eRecommendation: measure mounting holes and hose routing before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the dimensions and connections match my ATV?\u003c\/h3\u003e\n\u003cp\u003eThe assembly provides key measurements so you can confirm compatibility without guesswork. Knowing these dimensions helps ensure proper alignment with your frame and rear wheel brake mounts before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrake cylinder mounting hole distance: 42–50 mm (1.65–1.97 in)\u003c\/li\u003e\n  \u003cli\u003eBrake caliper mounting hole distance: 63 mm (2.48 in)\u003c\/li\u003e\n  \u003cli\u003eBrake oil hose length: 600 mm (23.62 in)\u003c\/li\u003e\n  \u003cli\u003eIncludes one extra brake pad and three cable ties for routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is included in the package and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with most items needed to swap out a rear brake system, reducing the number of individual parts to source. Basic hand tools and a few installation supplies will complete the job depending on your machine’s layout.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage: 1 brake assembly, 3 cable ties, 1 spare brake pad, 1 fuel filter\u003c\/li\u003e\n  \u003cli\u003eTypical tools: metric sockets\/wrenches, screwdriver, bleed kit or tubing, brake fluid\u003c\/li\u003e\n  \u003cli\u003eExtras recommended: thread locker, shop rags, torque wrench to OEM specs\u003c\/li\u003e\n  \u003cli\u003eNote: brake fluid and bleeding procedure are not included—follow manufacturer guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this assembly help with common brake problems?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or leaking master cylinder and caliper with a matched assembly eliminates multiple failure points at once. The refreshed seals, mounting points and included hardware restore hydraulic pressure and improve pedal feel when properly bled and installed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFixes leaks by replacing seals and hose connections\u003c\/li\u003e\n  \u003cli\u003eImproves braking firmness when bled correctly\u003c\/li\u003e\n  \u003cli\u003eSpeeds repair time by supplying matched components together\u003c\/li\u003e\n  \u003cli\u003eIncludes an extra pad to extend service life right away\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This rear brake master cylinder and caliper assembly is aimed at owners, small repair shops and DIY mechanics who maintain Chinese-brand ATVs and mini quads in the 50–125cc range. It suits riders who need an affordable, direct replacement package that matches common mounting dimensions—especially if the current rear brake is damaged, leaking, or missing parts. Before buying, compare the listed hole distances and hose length with your machine to ensure a proper fit; contact the seller with your model details if you need clarification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my Taotao Boulder B1?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit lists Taotao Boulder B1 compatibility. Verify your brake mounting hole distances match before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include brake fluid and bleeding supplies?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — brake fluid and bleeding tools are not included. You’ll need to provide fluid and a bleed kit separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55167214911831,"sku":"B097DG3J59","price":58.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-rear-brake-assembly-front-view.jpg?v=1790378700"},{"product_id":"fvrito-pz20-carburetor-thumb-throttle-kit-for-50-125cc-atvs-complete-replacement-with-air-filter-cable","title":"FVRITO PZ20 Carburetor Thumb Throttle Kit for 50-125cc ATVs — Complete Replacement with Air Filter \u0026 Cable","description":"\u003cp\u003e\u003cstrong\u003eThe FVRITO PZ20 Carburetor Thumb Throttle Kit is a complete replacement and upgrade package designed to improve throttle response and fuel efficiency on 50cc–125cc 4-stroke Chinese ATVs and quads.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your small ATV is sputtering, idling poorly, or you want a straightforward carb upgrade that balances power and economy, this PZ20 kit bundles the carburetor plus the essential accessories to install and ride. The kit replaces older PZ19 units and sits between PZ19 and PZ22 in performance, giving a noticeable breathing improvement without sacrificing fuel use. It’s supplied with the carb, air filter, intake manifold, thumb throttle, cable, grips and hardware so you don’t have to source parts individually.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this carburetor affect everyday riding performance?\u003c\/h3\u003e\n\u003cp\u003eSwapping to the PZ20 improves throttle responsiveness and smooths low- to mid-range delivery compared with worn or smaller carbs. Riders often notice quicker acceleration from a stop and more consistent idling after tuning. Expect better throttle modulation for trail riding and light hauling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBalanced power between PZ19 and PZ22 for usable midrange torque.\u003c\/li\u003e\n  \u003cli\u003eFactory-sized jets and needle designed for 50cc–125cc 4-stroke engines.\u003c\/li\u003e\n  \u003cli\u003eImproved throttle response with the included thumb controller and cable.\u003c\/li\u003e\n  \u003cli\u003eCompact design fits common Chinese ATV engine bays without major modification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat exactly comes in the kit and what do each of the parts do?\u003c\/h3\u003e\n\u003cp\u003eThe package includes the PZ20 carburetor plus all installation items to get the ATV back on the trail quickly. Each component is chosen to match common Chinese ATV fittings so installation is straightforward for home mechanics. Spare gaskets and clamps help prevent fuel leaks after assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePZ20 carburetor — main fuel delivery and air metering device.\u003c\/li\u003e\n  \u003cli\u003e35 mm air filter and intake manifold — clean airflow and secure connection to the engine.\u003c\/li\u003e\n  \u003cli\u003eThumb controller, accelerator cable (1180 mm), and 7\/8\" grips — user controls for throttle input.\u003c\/li\u003e\n  \u003cli\u003eFuel shutoff valve, fuel line, filters, spark plug, clips, screws, gaskets and O-ring — full hardware set for fitment and maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich models and engines is this kit compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis carb kit is built to replace OEM and aftermarket PZ-style carbs used on many Chinese-made ATVs and bikes. It fits an extensive list of 50cc–125cc models from popular brands and common engine families, but always verify physical dimensions and manifold match before purchase. The thumb controller is sized for standard 7\/8\" (22 mm) handlebars.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible brands include TaoTao, Coolster, SunL, Kazuma, Baja, Roketa, Vitacci, Loncin and others.\u003c\/li\u003e\n  \u003cli\u003eFits many TaoTao models such as ATA-110 and ATA-125 series and Coolster 110\/125 variants listed in product specs.\u003c\/li\u003e\n  \u003cli\u003eInner grip diameter 7\/8\" and throttle cable length 46.5\" (1180 mm) for common ATV setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tuning should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation is generally accessible to someone with basic mechanical skills and common hand tools; the kit contains most parts needed to perform the swap. After fitting, a short period of idle and mixture adjustment is normal to dial in performance based on altitude and fuel quality. Keep the supplied fuel filters and gaskets tight to avoid leaks and vacuum issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools required: screwdrivers, pliers, small wrench set and possibly a drill for mounting minor brackets.\u003c\/li\u003e\n  \u003cli\u003eInitial tuning: set idle, check choke operation, and adjust air\/fuel mixture for smooth idle.\u003c\/li\u003e\n  \u003cli\u003eReplacement tips: use clean fuel, inspect new fuel lines, and torque clamps evenly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FVRITO PZ20 Carburetor Thumb Throttle Kit is intended for ATV owners and hobby mechanics who operate Chinese 4-stroke 50cc–125cc quads and need a direct-replacement carb kit that improves throttle feel and fuel economy. It’s ideal if you want a single-purchase solution that includes controls, filters and fittings for a straightforward install without hunting for extra parts. If you own one of the listed TaoTao, Coolster, Kazuma, Baja, Roketa, Loncin or similar models and your machine shows reduced performance or you’re upgrading from a PZ19, this kit is built to fit and perform.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this PZ20 fit my TaoTao ATA-110 ATV?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit lists compatibility with many TaoTao ATA-110 models, but confirm manifold and throttle cable length before installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include everything needed for install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it includes the carburetor, air filter, manifold, throttle kit, cables, grips, fuel fittings and basic hardware.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003c\/p\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55167219466583,"sku":"B0DDKL26VY","price":41.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-pz20-carburetor-front-view.jpg?v=1790378871"},{"product_id":"fvrito-vm22-carburetor-for-predator-212-196cc-complete-kit-with-red-air-filter-10-jet-tuning-set","title":"FVRITO VM22 Carburetor for Predator 212\/196cc — Complete Kit with Red Air Filter \u0026 10-Jet Tuning Set","description":"\u003cp\u003e\u003cstrong\u003eFVRITO VM22 Carburetor kit replaces and upgrades small OHV clone engines (Predator 212\/196cc and similar) to improve airflow, fuel metering and throttle response for karts, mini bikes and utility machines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete VM22 carburetor assembly from FVRITO is built as a direct-fit replacement for many popular 6.5–7HP clone engines and select Predator\/GX-style motors. Supplied with a large red air filter, intake manifold, fuel filter, full gasket set, wrench and a 10‑main‑jet kit, the package gives you the parts needed for installation and tuning. The kit targets applications where improved breathing and the ability to dial in jetting are valuable—off-road karts, mini bikes, trail machines and replacement engine projects.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this carburetor improve engine performance?\u003c\/h3\u003e\n\u003cp\u003eThe VM22 is larger than many stock tiny carbs and allows increased air volume into the intake, which helps higher-displacement or modified clone engines generate more usable power when tuned correctly. Better filtration keeps abrasive dust from the carb throat, protecting moving parts and preserving jet function. Properly matched jetting from the included main-jet kit helps you reach the correct air\/fuel ratio across load and throttle positions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVM22 throat size increases airflow compared to stock small carbs\u003c\/li\u003e\n  \u003cli\u003eLarge paper\/foam red air filter reduces dust ingestion\u003c\/li\u003e\n  \u003cli\u003e10 main jets (#88–#125) let you tune for altitude, load and mods\u003c\/li\u003e\n  \u003cli\u003eIncludes fuel filter and gaskets for a clean installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich engines and machines will this kit fit?\u003c\/h3\u003e\n\u003cp\u003eFVRITO designed this VM22 kit to be compatible with Predator-style 212cc and 196cc OHV clone engines and a long list of equivalent small motors commonly used in go-karts, mini bikes and compact utility rigs. It adapts to many Coleman, Baja, TrailMaster, Massimo and similar platforms when the intake flange and throttle cable geometry match. Always verify physical fit and manifold bolt pattern before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Predator 212cc\/196cc and common GX200\/GX160 clones\u003c\/li\u003e\n  \u003cli\u003eListed fitment includes Coleman CT200U, BT200X, Baja MB200 and others\u003c\/li\u003e\n  \u003cli\u003eWorks on go-kart models like KT196 \/ BK200 and many mini buggies\u003c\/li\u003e\n  \u003cli\u003eCheck flange size, throttle linkage and fuel connection for fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the kit include and how will each part help?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives ready for installation with every common consumable you’ll need to mount and tune the carburetor. A selection of main jets allows you to richen or lean the mixture as conditions and modifications change. The included intake manifold and gaskets simplify bolting the carb to clone engine flanges while the fuel filter keeps debris out of the float bowl.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1× VM22 carburetor body pre-assembled for throttle and choke\u003c\/li\u003e\n  \u003cli\u003e1× large red air filter to increase airflow and dust separation\u003c\/li\u003e\n  \u003cli\u003e1× intake manifold and full gasket set for a clean seal\u003c\/li\u003e\n  \u003cli\u003e10× main jets (#88–#125), fuel filter, mounting screws and wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I approach jetting and setup for best results?\u003c\/h3\u003e\n\u003cp\u003eTuning begins with the middle-size jet from the kit and checking plug color at steady cruise to determine mixture. Make single-step adjustments—one jet size at a time—until you see the recommended spark plug appearance for a safe running mixture. Also trim air filter routing and ensure no vacuum leaks for consistent idle and throttle response.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStart with a mid-range jet (for many engines that’s around #95–#100)\u003c\/li\u003e\n  \u003cli\u003eInspect spark plug after steady-run to judge mixture (color guide)\u003c\/li\u003e\n  \u003cli\u003eAdjust one jet size per test run; avoid skipping multiple sizes\u003c\/li\u003e\n  \u003cli\u003eConfirm manifold\/gasket seal and check for vacuum leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This FVRITO VM22 carburetor kit is aimed at DIY mechanics, kart and mini-bike builders, small-engine repair shops and hobbyists upgrading or replacing carburetors on Predator-style 212cc\/196cc and similar clone engines. If you need more airflow and the ability to tune jetting for performance or changing altitude, this kit provides the parts and flexibility necessary for a practical, serviceable upgrade.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this carburetor bolt to my Predator 212cc clone engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—VM22 is designed for Predator-style 212\/196cc clone engines, but verify your intake flange and bolt pattern before installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What jet should I start with for tuning?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Begin with a mid-range jet from the kit (around #95–#100) and make one-size adjustments after steady-run plug checks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55167222120791,"sku":"B0927PRMNM","price":44.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-vm22-carburetor-front-view.jpg?v=1790378957"},{"product_id":"fvrito-12mm-rear-hydraulic-brake-assembly-for-50-150cc-pit-bikes-master-cylinder-caliper-550mm-hose","title":"FVRITO 12mm Rear Hydraulic Brake Assembly for 50–150cc Pit Bikes — Master Cylinder, Caliper, 550mm Hose","description":"\u003cp\u003e\u003cstrong\u003eThe FVRITO 12mm rear disc hydraulic brake assembly is a complete replacement master cylinder, caliper and pad kit designed for 50–150cc Chinese pit and dirt bikes with a 12mm rear wheel shaft.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, ready-to-install brake assembly combines a 12mm mounting axle, 550mm brake hose and an integrated master cylinder to restore rear stopping power on many small-displacement bikes. It’s built to match common Chinese-made models (SSR, Taotao, Apollo, Coolster, Roketa, Pitster Pro, Atomik and similar brands) and comes with spare pads and basic fittings so you can install quickly and check fitment before final mounting.\u003c\/p\u003e\n\n\u003ch3\u003eWill this brake assembly fit my pit bike?\u003c\/h3\u003e\n\n\u003cp\u003eCompatibility depends on axle diameter and mounting spacing. This assembly is built for 12mm rear wheel shafts and mounting hole distances between 42–50mm; confirm your bike’s shaft size and bracket spacing before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntended for 12mm axle shaft bikes (not compatible with 15mm shafts).\u003c\/li\u003e\n  \u003cli\u003eMounting hole distance: 42–50mm (1.65–1.97 inches).\u003c\/li\u003e\n  \u003cli\u003eBanjo bolt thread: M10 x 1.25 for brake hose connection.\u003c\/li\u003e\n  \u003cli\u003eCommonly fits many 50–150cc Chinese pit\/dirt bikes and popular model lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components come in the box and what tools will I need?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit ships with the brake assembly pre-mounted to the hose plus a few extras so you can swap parts on the trail. Typical installation requires basic hand tools and bleeding supplies to ensure proper hydraulic function after fitting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1x brake assembly (master cylinder + caliper), 3x cable ties, 1x extra brake pad set, 1x fuel filter.\u003c\/li\u003e\n  \u003cli\u003eTools recommended: metric sockets\/wrenches, pliers, hex keys, and a simple brake-bleeding kit.\u003c\/li\u003e\n  \u003cli\u003eBrake hose length: 550mm (approx. 21.65 inches) — trim and refit as needed by a trained mechanic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the FVRITO assembly affect braking performance and maintenance?\u003c\/h3\u003e\n\n\u003cp\u003eReplacing a worn rear master cylinder and caliper restores pedal feel and reduces sponginess from leaks or degraded seals. This hydraulic assembly uses a standard banjo connection and replaceable pads to keep long-term maintenance simple and cost-effective.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHole diameter for mounting: 79mm, enabling stable caliper positioning.\u003c\/li\u003e\n  \u003cli\u003eMount axle hole: 12mm to match 12mm rear shafts without modification.\u003c\/li\u003e\n  \u003cli\u003eSupplied extra pads for quick roadside replacement.\u003c\/li\u003e\n  \u003cli\u003eRegular bleeding and fluid checks recommended for consistent performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizing and fit checks should I run before ordering?\u003c\/h3\u003e\n\n\u003cp\u003eDouble-check a few physical measurements on your bike so the part bolts up cleanly and the hose reaches the master cylinder. If any measurement falls outside the listed range, this assembly may not fit correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm rear wheel shaft diameter is 12mm (not 15mm).\u003c\/li\u003e\n  \u003cli\u003eMeasure caliper mounting hole centers: 42–50mm acceptable.\u003c\/li\u003e\n  \u003cli\u003eVerify banjo bolt thread and brake hose routing are compatible with your frame.\u003c\/li\u003e\n  \u003cli\u003eCompare the kit’s 79mm hole diameter against your bracket clearances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders and mechanics who need an economical, drop-in style rear hydraulic brake replacement for 50–150cc Chinese pit and small dirt bikes. Ideal for owners of SSR, Taotao, Coolster, Roketa, Apollo, Pitster Pro, Atomik and similar models who require a 12mm axle solution and want spare pads and basic hardware included. If you’re unsure about fit, measure your axle and mounting spacing or message the seller with model details for compatibility guidance before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit a 125cc pit bike rear axle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your rear axle is 12mm and mounting hole spacing is 42–50mm; it does not fit 15mm axles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are brake pads included and replaceable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes an extra set of pads, and pads are replaceable for routine maintenance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55167327109463,"sku":"B097R437MX","price":59.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvirtiro-rear-brake-assembly-front.jpg?v=1790383503"},{"product_id":"fvrito-left-hydraulic-brake-master-cylinder-caliper-assembly-for-50cc-125cc-atvs-and-mini-bikes-22mm-lever-perch-63mm-mount","title":"FVRITO Left Hydraulic Brake Master Cylinder \u0026 Caliper Assembly for 50cc–125cc ATVs and Mini Bikes — 22mm Lever Perch, 63mm Mount","description":"\u003cp\u003e\u003cstrong\u003eThis FVRITO left-side hydraulic brake master cylinder and caliper assembly is a direct-replacement brake kit engineered to fit many 50cc–125cc Chinese ATVs and mini bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a complete left-hand braking solution, this assembly combines the master cylinder, caliper, lever perch and mounting hardware into one package so you can restore hydraulic stopping power quickly. It’s built to fit common bolt patterns and hydraulic hose lengths found on many Taotao, Coolster, Vitacci, NST and other Chinese-brand quads and mini bikes. The kit includes spare pads, a fuel filter and a brake switch for easier installation and maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eWill this brake assembly fit my 50cc–125cc ATV or mini bike?\u003c\/h3\u003e\n\u003cp\u003eIt fits a wide range of Chinese-brand ATVs and mini bikes listed by common makes and models, but you should verify key dimensions before ordering. Check the lever perch diameter, caliper mounting hole distance and hose length against your vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLever perch diameter: 22 mm (0.87 inches)\u003c\/li\u003e\n  \u003cli\u003eCaliper mounting hole distance: 63 mm (2.48 inches)\u003c\/li\u003e\n  \u003cli\u003eBrake oil pipe length: 1500 mm (59.06 inches)\u003c\/li\u003e\n  \u003cli\u003eCompatible brands include Taotao, Coolster, Vitacci, Roketa, Baja, NST and many others\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what comes in the package?\u003c\/h3\u003e\n\u003cp\u003eThe kit is supplied with most of the parts needed for a direct swap so installation is straightforward for anyone familiar with basic ATV or mini-bike maintenance. You’ll receive the master cylinder and caliper as an assembled unit plus extras to help finish the job without immediate trips to the parts store.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x complete left brake assembly (master cylinder + caliper + lever perch)\u003c\/li\u003e\n  \u003cli\u003e1 x extra brake pad set and 1 x extra brake switch\u003c\/li\u003e\n  \u003cli\u003e3 x zip ties for securing hoses and wiring\u003c\/li\u003e\n  \u003cli\u003e1 x fuel filter included as a small service convenience\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and maintenance details should I expect?\u003c\/h3\u003e\n\u003cp\u003eThis hydraulic unit restores conventional disc braking behavior—firm lever feel, consistent brake actuation and easier bleeding compared with older systems. Routine inspection and pad replacement will keep stopping performance reliable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace pads when friction material is low or glazing appears\u003c\/li\u003e\n  \u003cli\u003eBleed the system after installation to remove air and ensure firm lever feel\u003c\/li\u003e\n  \u003cli\u003eInspect hoses and fittings for leaks or damage periodically\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there fitment warnings or checks I should do first?\u003c\/h3\u003e\n\u003cp\u003eBecause Chinese ATV and mini-bike frames vary, confirm the listed dimensions and visually compare the item pictures to your current assembly before purchase. If you’re unsure, contacting the seller with photos or measurements helps prevent ordering the wrong part.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare the 22 mm lever perch diameter to your handlebar clamp\u003c\/li\u003e\n  \u003cli\u003eConfirm the 63 mm caliper mounting hole spacing on your fork or bracket\u003c\/li\u003e\n  \u003cli\u003eEnsure the 1500 mm hose length is adequate for routing on your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Riders, home mechanics and small-shop technicians who need a cost-effective left-side hydraulic brake replacement for Chinese-made 50cc–125cc ATVs, quads and mini bikes. It’s suited to owners of Taotao, Coolster, Vitacci, Roketa and similar brands who want a ready-to-install assembly with spare pads and basic hardware included. If you need precise compatibility help, measure your existing parts and reach out with model details before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit Taotao and Coolster 110\/125 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it lists compatibility with many Taotao and Coolster 110\/125 models; verify the 22 mm perch and 63 mm caliper spacing to be certain.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included in the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes the left brake assembly, three tie straps, an extra pad set, a fuel filter and an extra brake switch.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55167369118039,"sku":"B097H8ZNGY","price":59.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-left-brake-assembly-front-view.jpg?v=1790385012"},{"product_id":"fvrito-vm22-carburetor-upgrade-kit-for-predator-212-196-224cc-engines-38mm-twin-filters-jet-kit","title":"FVRITO VM22 Carburetor Upgrade Kit for Predator 212\/196\/224cc Engines — 38mm Twin Filters \u0026 Jet Kit","description":"\u003cp\u003e\u003cstrong\u003eFVRITO's VM22 carburetor upgrade kit replaces stock carbs on 196–224cc clone engines to improve airflow, throttle response, and tuning flexibility for mini bikes and go-karts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete VM22 kit is built to fit a wide range of small OHV clone engines—Predator 212\/196\/224 variants and many GX160\/GX200-style blocks—and arrives with multiple main jets, a high-flow air filter, and all the mounting hardware needed for a direct swap on most mini bikes, go-karts, and small ATVs. It’s intended for riders and DIY mechanics who want an accessible performance upgrade: more consistent fuel metering, simpler tuning, and the ability to experiment with jet sizes for different elevation or load conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this VM22 kit affect engine performance?\u003c\/h3\u003e\n\n\u003cp\u003eUpgrading to the VM22 increases the carburetor’s breathing capacity and provides a range of main jets for richer or leaner mixtures. That can deliver crisper throttle response, smoother midrange, and the potential for slightly higher peak power when matched to the right jetting and filter setup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-flow twin 38mm air filters reduce intake restriction.\u003c\/li\u003e\n  \u003cli\u003eMultiple main jets (#88–#125) let you tune for altitude and load.\u003c\/li\u003e\n  \u003cli\u003eLarger throat and flow profile improve air\/fuel mixing versus many stock carbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the VM22 fit my engine and mini vehicle?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit lists broad compatibility with Predator 212\/196\/200\/224cc and many GX160\/GX200 clone engines plus a long list of mini bikes and go-kart models. Fitment usually requires matching the intake manifold bore and mounting stud holes; the included manifold and gaskets simplify installation but always verify dimensions against your engine before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Predator, RATO clones, Lifan-style and many small OHV engines.\u003c\/li\u003e\n  \u003cli\u003eDesigned for Coleman CT200U, Baja MB200, Massimo MB200, TrailMaster and similar models.\u003c\/li\u003e\n  \u003cli\u003eMeasure manifold bore and stud pattern if unsure; contact support with photos.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts come in the box and why they matter?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit contains the VM22 carburetor, two 38mm air filters, an intake manifold, fuel filter, full gasket set, mounting screws, a wrench, and a 10-jet main jet kit. These components allow immediate installation and on-the-fly jet changes so you can tune for conditions without sourcing extra parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVM22 carburetor: the primary performance upgrade component.\u003c\/li\u003e\n  \u003cli\u003eTwo air filters: higher flow and replacement ready for dusty conditions.\u003c\/li\u003e\n  \u003cli\u003eMain jet kit (#88–#125): enables precise tuning for elevation and load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I tune and maintain the carb after installation?\u003c\/h3\u003e\n\n\u003cp\u003eStart with the factory jet closest to your original carb size, then test at partial and full throttle to check mixture and spark plug color. Swap jets in small increments; run a compression check and keep the air filter clean. Regularly inspect gaskets and the fuel filter to prevent dirt and varnish from affecting idle and performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBegin with a conservative jet and adjust based on running condition.\u003c\/li\u003e\n  \u003cli\u003eKeep the supplied fuel filter and air filters clean for consistent flow.\u003c\/li\u003e\n  \u003cli\u003eReplace gaskets during reassembly and confirm throttle\/freeplay adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FVRITO VM22 carburetor kit is aimed at DIY mechanics, hobbyists, and small-fleet owners who run Predator-style 196–224cc and GX-style clone engines in mini bikes, go-karts, and light powersports machines. It’s best suited for users comfortable measuring intake flanges and changing jets to dial in performance for different elevations, loads, or racing conditions. If you need help confirming fitment, provide engine photos and measurements before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this VM22 kit fit Predator 212 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this FVRITO VM22 kit is designed to fit many Predator 212\/196\/224cc and GX-style clone engines, but verify manifold bore and mounting pattern before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are jets included for tuning at altitude?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the kit includes main jets #88 through #125 so you can tune mixture for elevation and load variations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55167373803863,"sku":"B0CSM62VKG","price":45.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvirti-vm22-front-assembled.jpg?v=1790385171"},{"product_id":"fvrito-12v-atv-headlight-and-rear-brake-tail-light-kit-for-50-125cc-quads-12v-35w-head-led-tail","title":"FVRITO 12V ATV Headlight and Rear Brake Tail Light Kit for 50–125cc Quads — 12V\/35W Head + LED Tail","description":"\u003cp\u003e\u003cstrong\u003eThe FVRITO 12V 35W headlight and matching rear brake tail light kit replaces worn lighting on most 50–125cc Chinese ATVs, restoring road-legal illumination and visible braking signals.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete lamp assembly includes a 12V\/35W front headlight built into an ABS housing and a red LED rear tail\/brake light, designed to fit many popular Chinese-brand youth and utility quads. The unit ships as a ready-to-install replacement with a 4-wire headlight plug and a 3-wire tail light connector. Before ordering, compare the provided dimensions and connector types to your machine to ensure a correct match.\u003c\/p\u003e\n\n\u003ch3\u003eWill this headlight fit my 110cc kids ATV?\u003c\/h3\u003e\n\n\u003cp\u003eCompatibility covers a wide range of common 50–125cc models from brands like Taotao, Coolster, Roketa, Vitacci, ICEbear and others. Many 110cc youth ATVs share mounting patterns and electrical systems, making this a frequent direct swap. Still, confirm that the housing size and connector wiring match your existing light.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits many models: Taotao 110B, Boulder B1, Coolster 3050C, Vitacci Hawk 110\u003c\/li\u003e\n  \u003cli\u003eDimensions: headlight assembly approx. 440 mm x 490 mm\u003c\/li\u003e\n  \u003cli\u003eElectrical: headlight 12V, 35W with 4-wire plug; tail uses 3-wire LED connector\u003c\/li\u003e\n  \u003cli\u003eMount points: verify bolt spacing against your frame before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what wiring should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic ATV maintenance: unbolt the old assembly, disconnect the wiring harness, and attach this replacement. The headlight uses a 4-wire plug for power and low\/high beam functions while the tail light uses a 3-wire connector for running and brake lights. If your connectors differ, simple wiring adapters or splicing with proper insulation will be required.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePlug types: headlight 4-wire, tail light 3-wire\u003c\/li\u003e\n  \u003cli\u003eNo special tools beyond common sockets and screwdrivers\u003c\/li\u003e\n  \u003cli\u003eCheck grounding and fuse rating (12V system) after installation\u003c\/li\u003e\n  \u003cli\u003eCompare wiring colors and test lights before final assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect from this lamp?\u003c\/h3\u003e\n\n\u003cp\u003eThe housing is molded from ABS plastic for a balance of light weight and impact resistance suitable for off-road conditions. The front lamp uses a 35W halogen-style bulb rating (12V system), while the rear uses multiple red LEDs for efficient brake and running illumination. Proper mounting and waterproofing at connector points will extend service life in dusty or wet environments.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHousing: ABS plastic for strength and weather resistance\u003c\/li\u003e\n  \u003cli\u003eFront lamp rating: 12V, 35W (verify bulb type on your quad)\u003c\/li\u003e\n  \u003cli\u003eRear lamp: multi-LED array for bright brake\/running light\u003c\/li\u003e\n  \u003cli\u003eRecommended: protect exposed splices with heat shrink or dielectric grease\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying to ensure a good match?\u003c\/h3\u003e\n\n\u003cp\u003eMeasure your existing headlight assembly and compare mounting hole centers, overall width\/length, and plug types. Review the listed compatible models for guidance but rely on physical dimensions and electrical match above model names. If unsure, capture a photo of your current light and compare it to the images and specifications provided.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMeasure bolt spacing and overall headlight footprint\u003c\/li\u003e\n  \u003cli\u003eConfirm your ATV runs on a 12V electrical system\u003c\/li\u003e\n  \u003cli\u003eCompare connector pins: headlight 4-wire, tail 3-wire\u003c\/li\u003e\n  \u003cli\u003eContact the seller with photos for fitment help if needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders and DIY mechanics who own 50–125cc Chinese-brand quads and need a complete, economical lighting replacement are the primary audience. The kit suits parents replacing worn lights on youth ATVs, small-fleet owners maintaining multiple machines, and hobbyists who prefer bolt-on parts that restore both headlight illumination and rear brake visibility. If you require exact OEM match, bring measurements and connector photos to confirm compatibility before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this headlight work with 12V 110cc ATVs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The headlight is 12V and commonly fits many 110cc Chinese quads, but check bolt spacing and connector type first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the tail light LEDs replaceable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The tail light is an integrated LED assembly; individual LEDs are not serviceable, so replace the unit if needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55167418859863,"sku":"B0957CDBSW","price":42.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-assembly-full-view.jpg?v=1790386297"},{"product_id":"fvrito-50-inch-left-hydraulic-disc-hand-brake-kit-for-mini-bikes-master-cylinder-caliper-1270mm-hose","title":"FVRITO 50-inch Left Hydraulic Disc Hand Brake Kit for Mini Bikes — Master Cylinder \u0026 Caliper, 1270mm Hose","description":"\u003cb\u003eFVRITO's 50-inch left hydraulic disc hand brake master cylinder and caliper assembly upgrades rear braking on compatible 97cc–212cc mini bikes with smoother, stronger hydraulic control.\u003c\/b\u003e\n\n\u003cp\u003eThis complete hydraulic brake kit replaces or upgrades mechanical rear braking on selected mini bikes, including Baja Doodle Bug DB30 and several Baja Blitz models. It pairs a hand-operated master cylinder with a mounting-ready caliper and a 1270mm (50 inch) hydraulic hose to deliver consistent stopping power without the push-pull friction of cable systems. The kit is sized and pitched for common minibike brackets but requires careful fitting and proper torque to ensure leak-free, safe operation.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does this hydraulic brake kit include and how is it sized?\u003c\/h3\u003e\n\u003cp\u003eThe FVRITO assembly includes a left-hand master cylinder with lever, a rear brake caliper preassembled for disc use, and a 1270mm (50 in) hydraulic hose. The bottom pump installation pitch measures 51mm (2.01 in), a common spacing for many mini bike frames.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLeft-hand master cylinder with lever and reservoir\u003c\/li\u003e\n\u003cli\u003eRear disc caliper ready for mounting\u003c\/li\u003e\n\u003cli\u003e1270mm (50 in) hydraulic line pre-fitted\u003c\/li\u003e\n\u003cli\u003e51mm bottom pump mounting pitch for bracket fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich mini bikes will this FVRITO brake fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is designed for Baja Doodle Bug Dirt Bug DB30 and several Baja Blitz models that use similar hydraulic mounting geometry. It also fits many 97cc and 2.8HP engine minibikes and is compatible with multiple 79cc–212cc platforms when mounting points align.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible: Baja Doodle Bug DB30 and many Baja Blitz variants\u003c\/li\u003e\n\u003cli\u003eEngine range commonly compatible: 79cc to 212cc, including 97cc and 2.8HP options\u003c\/li\u003e\n\u003cli\u003eNot a direct bolt-on replacement for CT100U, Motovox, Mega Moto MMB80\/105 without bracket changes\u003c\/li\u003e\n\u003cli\u003eVerify pump pitch and hose routing before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does hydraulic braking compare to mechanical cable brakes?\u003c\/h3\u003e\n\u003cp\u003eHydraulic systems provide stronger, more linear stopping power with lighter lever effort and smoother modulation than mechanical cables. Because fluid transfers force more efficiently, hydraulics reduce play and friction, making downhill or trail braking more controllable.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmoother lever feel and better modulation under load\u003c\/li\u003e\n\u003cli\u003eHigher braking force with less hand effort\u003c\/li\u003e\n\u003cli\u003eReduced maintenance related to cable stretch and corrosion\u003c\/li\u003e\n\u003cli\u003eRequires correct bleeding and torque for leak-free performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and safety points should I be aware of?\u003c\/h3\u003e\n\u003cp\u003eProper installation is critical for reliability and safety. Ensure mounting holes align with your frame, use the specified 51mm pump pitch, and tighten hydraulic connections to the manufacturer's recommendations—neither over- nor under-tightening. If your frame uses a different bracket layout, you may need to cut and relocate the original brake bracket or fabricate an adapter.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVerify bracket alignment and hole spacing before drilling\u003c\/li\u003e\n\u003cli\u003eBleed the system thoroughly to remove air for firm lever feel\u003c\/li\u003e\n\u003cli\u003eCheck for leaks after first installation and road test at low speed\u003c\/li\u003e\n\u003cli\u003eNot directly compatible with CT100U, Mega Moto 105 without bracket modification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for?\u003c\/p\u003e\n\u003cp\u003eThis FVRITO hydraulic brake kit is aimed at minibike owners who want a reliable performance upgrade from mechanical rear brakes—particularly riders of Baja Doodle Bug DB30, Baja Blitz, and similar 97cc–212cc machines. It's well suited for trail riders, casual racers, and DIY mechanics comfortable measuring mount pitches and making minor bracket adjustments. If you need a plug-and-play replacement for uncommon frames (CT100U, Mega Moto MMB80\/105), plan for bracket modification or consult a fabricator.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this brake kit a direct fit for CT100U or Mega Moto models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This kit is not a direct replacement for CT100U or Mega Moto 105; bracket cutting or relocation is required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the hydraulic hose length and pump mounting pitch?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hose length is 1270mm (50 inches) and the bottom pump installation pitch is 51mm (2.01 inches).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55167436423511,"sku":"B08ZMMJSTS","price":44.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-left-master-cylinder-front-view.jpg?v=1790386627"},{"product_id":"fvrito-12-5x2-75-knobby-tire-inner-tube-kit-2-pack-heavy-duty-off-road-tread-for-razor-mx350-mx400-and-47-49cc-mini-bikes","title":"FVRITO 12.5x2.75 Knobby Tyre \u0026 Inner Tube Kit — 2-Pack Heavy-Duty Off‑Road Tread for Razor MX350\/MX400 and 47–49cc Mini Bikes","description":"\u003cp\u003e\u003cstrong\u003eFVRITO's 12.5x2.75 knobby tire-and-tube kit is a heavy-duty replacement set designed to restore traction, shock absorption, and puncture resistance for Razor MX350\/MX400, many electric scooters and 47–49cc mini dirt bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mini dirt bike, pocket bike, or electric scooter uses 12.5 x 2.75 tires, this kit bundles two knobby tires, two inner tubes and convenience hardware so you can replace both sides in one go. The tread pattern and thicker rubber compound aim to improve grip on packed dirt, gravel, and mixed urban routes while the included valve cores and caps make installation straightforward. Before ordering, confirm the 12.5x2.75 size marking matches your wheel and check the stem type for compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these tires change traction and ride feel?\u003c\/h3\u003e\n\u003cp\u003eThe aggressive knobby tread increases bite on loose or uneven surfaces, helping reduce slippage off-road and on dirt paths. The heavy-duty rubber construction adds firmness for improved stability while still offering some shock absorption for small bumps and curbs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKnobby tread pattern for off-road grip and cornering stability.\u003c\/li\u003e\n  \u003cli\u003eThicker rubber for better wear life and puncture resistance.\u003c\/li\u003e\n  \u003cli\u003eDesign balances traction with everyday ride comfort.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this set fit my Razor MX350, X-Treme X-560, or 49cc pit bike?\u003c\/h3\u003e\n\u003cp\u003eThe wheels listed in the product fitment are common matches for the 12.5x2.75 tire dimension; they include many Razor, X-Treme and small gas or electric mini bikes. Size markings vary—look for 12.5 x 2.75, 12 1\/2 x 2 3\/4 or 12 x 2.75 on your current tire before swapping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models highlighted: Razor MX350\/MX400, X-Treme X-560 and multiple e-bike\/scooter models.\u003c\/li\u003e\n  \u003cli\u003eWorks with many 47cc–49cc mini dirt bikes and pocket bikes using the same diameter\/width.\u003c\/li\u003e\n  \u003cli\u003eConfirm straight-valve stem type and wheel clearance prior to purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how simple is installation?\u003c\/h3\u003e\n\u003cp\u003eThis kit arrives ready to mount: two tires, two inner tubes, stem caps in two colors, valve cores plus a core wrench. If you have basic tire tools and experience or access to a local bike shop, installation is fast; the included valve hardware helps streamline tube seating and inflation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage: 2 tires, 2 inner tubes, 2 red valve caps, 2 black valve caps, valve core wrench, 2 brass valve cores.\u003c\/li\u003e\n  \u003cli\u003eCore wrench and extra cores help avoid mid-install replacements.\u003c\/li\u003e\n  \u003cli\u003eRecommend proper tire levers and a pump or compressor for safe mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these tires for daily riding and rough surfaces?\u003c\/h3\u003e\n\u003cp\u003eConstructed from a heavier rubber compound, these tires prioritize puncture resistance and structural stability for frequent short-distance commutes and light off-road use. They’re intended for recreational and utility applications rather than professional racing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced sidewalls and tread reduce pinch flats and abrasions.\u003c\/li\u003e\n  \u003cli\u003eStable construction suited for mixed-surface riding and kids’ bikes.\u003c\/li\u003e\n  \u003cli\u003eNot marketed as race or high-speed highway tires—use within manufacturer limits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Riders who need a straightforward, all-in-one replacement for both tires and tubes on smaller dirt bikes, pocket bikes and many electric scooters will find value in the FVRITO 12.5x2.75 kit. It’s ideal for parents replacing worn tires on kids’ Razor MX350\/MX400 units, hobbyists maintaining mini dirt bikes, or commuters who want tougher rubber for routes with gravel, trail connectors or uneven pavement. Double-check wheel diameter, width and valve stem type before ordering to ensure a proper fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these tires fit Razor MX350 and MX400?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the 12.5x2.75 size is listed as compatible with Razor MX350 and MX400; verify the size stamped on your current tire first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are inner tubes-included and which valve type?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, two inner tubes are included with straight valve cores and two red plus two black stem caps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55167449137495,"sku":"B08RYQZNWW","price":67.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-packaging-12-5x2-75.jpg?v=1790386797"},{"product_id":"fvrito-fuel-tank-replacement-for-196-212cc-engines-red-kit-with-stainless-cap-petcock","title":"FVRITO Fuel Tank Replacement for 196–212cc Engines — Red Kit with Stainless Cap \u0026 Petcock","description":"\u003cp\u003e\u003cstrong\u003eFVRITO's replacement gas fuel tank with a stainless cap is a direct-fit, upgraded fuel tank assembly for 196–212cc OHV clone and small engines used on mini bikes, go-karts, and light equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty fuel tank kit replaces worn or cracked factory tanks with a more convenient refueling layout and includes everything needed to install and run: cap, petcock, in-tank filter, fuel line, mounting hardware and a spark plug. Designed for a wide range of Honda clone, Predator and Lifan-based engines, the tank works with many popular mini bike, go-kart and light equipment models that use 5.5–6.5 hp class engines.\u003c\/p\u003e\n\n\u003ch3\u003eWill this tank fit my engine or minibike model?\u003c\/h3\u003e\n\u003cp\u003eThe FVRITO tank is built for compatibility across many OHV clone engines and common mini bike\/go-kart platforms. It lists fitment for Honda GX140\/GX160\/GX200 clones, Predator 212 Hemi, Lifan 168F, and other 196–212cc engines, plus direct application to Coleman's CT200u series, BT200x, Massimo MB200 and similar models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible engines: Honda clone GX140\/GX160\/GX200, Predator 212, Lifan 168F, Powerhorse\/Predator clones\u003c\/li\u003e\n  \u003cli\u003eMini bikes: Coleman CT200U series, CT200U-EX, BT200X, Baja Warrior MB200\u003c\/li\u003e\n  \u003cli\u003eGo-karts \u0026amp; equipment: KT196, Massimo MB200, pressure washers, generators and more\u003c\/li\u003e\n  \u003cli\u003eCross-check: compare mounting bolt spacing and fuel neck placement to your original tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what’s included in the kit?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for most hobbyists and mechanics: the kit arrives with the core components pre-supplied so you can swap tanks without sourcing parts separately. Basic hand tools are sufficient and the included wrench, nuts and screws simplify mounting; professional help is optional if you prefer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: gas tank, stainless cap, fuel line, valve petcock, in-tank filter, spark plug\u003c\/li\u003e\n  \u003cli\u003eMounting hardware: 2 nuts, 1 screw and a wrench for installation\u003c\/li\u003e\n  \u003cli\u003eTools needed: common wrenches and screwdrivers; no specialized equipment\u003c\/li\u003e\n  \u003cli\u003eEstimated time: 30–90 minutes depending on model and access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical benefits does the upgraded tank and cap provide?\u003c\/h3\u003e\n\u003cp\u003eThis upgraded tank improves refueling ergonomics and long-term reliability versus brittle factory plastics. The stainless cap resists corrosion, the off-set filler design eases filling, and the supplied in-tank filter plus petcock help reduce clogs and make fuel management simpler during use or storage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless cap: corrosion resistance and a secure seal for storage\u003c\/li\u003e\n  \u003cli\u003eOff-set filler: easier access when tank is mounted in tight frames\u003c\/li\u003e\n  \u003cli\u003eIn-tank filter and petcock: cleaner fuel feed and simple shutoff for maintenance\u003c\/li\u003e\n  \u003cli\u003eComplete kit: reduces downtime by supplying all common replacement parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The FVRITO replacement fuel tank assembly is made for owners of mini bikes, go-karts and small engine equipment who need a dependable, direct-fit replacement or an upgrade from an aging factory tank. It suits DIY mechanics, repair shops, and anyone maintaining pressure washers, generators, small tillers or Coleman\/Trailmaster-style minibikes. Before buying, confirm your engine model and compare mounting points to ensure correct fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this tank include a fuel cap and petcock?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes a stainless fuel cap, valve petcock, in-tank filter, fuel line and mounting hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it fit a Predator 212 or a Honda GX160 clone?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Generally yes. It’s designed for Predator 212 and many Honda GX140\/GX160\/GX200 clone engines; verify mount spacing before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55167494848855,"sku":"B0B82D545X","price":62.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-view-fuel-tank.jpg?v=1790387638"},{"product_id":"fvrito-aluminum-flywheel-kit-for-predator-196-224cc-10-000-rpm-includes-valve-springs-key","title":"FVRITO Aluminium Flywheel Kit for Predator 196–224cc (10,000 RPM, Includes Valve Springs \u0026 Key)","description":"\u003cp\u003e\u003cstrong\u003eFVRITO's aluminum flywheel kit upgrades non-hemi Predator-style 196–224cc engines to smoother revs and higher RPM (up to 10,000 rpm) while including valve springs and a key for safer, more reliable operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis performance flywheel assembly is built for small-engine applications such as mini bikes, go-karts and clones using non-hemi Predator or BSP\/Tilly-style blocks. Machined from durable aluminum, the flywheel is designed to improve throttle response and acceleration by changing rotational mass and ignition timing. The kit includes two 22 lb valve springs and an extra spark plug to help you safely run higher RPMs without valve float or ignition issues.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this flywheel change engine behavior on a mini bike or go-kart?\u003c\/h3\u003e\n\u003cp\u003eSwapping the stock flywheel for this lighter aluminum unit reduces rotational inertia, which lets the engine rev faster and respond quicker to throttle input. The 10krpm capability and built-in timing advance give a noticeable increase in top-end RPM potential without complicated tuning. You may still need to tune carburetion and ensure proper cooling for sustained high-rpm use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLower rotational mass for faster revving and improved acceleration\u003c\/li\u003e\n  \u003cli\u003eBuilt-in 8° timing advance on the 196cc version moves ignition toward 32° TDC\u003c\/li\u003e\n  \u003cli\u003eCompatible with many Predator-style non-hemi engines and several mini bike models\u003c\/li\u003e\n  \u003cli\u003eIncludes valve springs and spare spark plug to support higher RPM operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this flywheel fit my engine—what models are supported?\u003c\/h3\u003e\n\u003cp\u003eThe FVRITO flywheel fits non-hemi Predator 212cc and 224cc engines, plus compatible clones like GX160\/GX200 196cc BSP and Tilly-style blocks. It is not compatible with Predator hemi engines. Verify your crank taper and bolt pattern before ordering to ensure a perfect match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: Predator non-hemi 212cc, 224cc, Ghost 208cc, GX160\/GX200 196cc clones\u003c\/li\u003e\n  \u003cli\u003eCompatible mini bikes: Coleman CT200U, BT200X, Baja Warrior MB series, Massimo MB models\u003c\/li\u003e\n  \u003cli\u003eNot for: Predator hemi-design engines\u003c\/li\u003e\n  \u003cli\u003eNote: lapping to your crank taper recommended for best seating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and how does it protect the engine at higher RPM?\u003c\/h3\u003e\n\u003cp\u003eThis package contains the FVRITO aluminum flywheel, a key for secure hub alignment, two 22 lb valve springs and an extra spark plug. The stronger valve springs reduce valve float risk at raised RPMs, and the spare plug helps address ignition problems during tuning or service. The aluminum hub and threaded center offer durable mounting and reduced taper wear over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHardware included: flywheel, key, two 22 lb valve springs, extra spark plug\u003c\/li\u003e\n  \u003cli\u003eValve springs: even force and stable rebound to prevent valve float\u003c\/li\u003e\n  \u003cli\u003eCenter hub: reinforced with threaded holes to protect crank taper and keyway\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any installation cautions or maintenance tips?\u003c\/h3\u003e\n\u003cp\u003eBecause this flywheel is made by integrated casting, you may see hairline surface cracks that do not affect function; they are normal. Always lap the flywheel to your crank for a tight fit and inspect hardware torque. After installation, monitor valve clearance and carburetor settings when running at higher RPMs to ensure reliable operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLap flywheel to crank for proper seating and balance\u003c\/li\u003e\n  \u003cli\u003eInspect for normal hairline casting lines—these are cosmetic only\u003c\/li\u003e\n  \u003cli\u003eCheck valve clearance and carburation after first run at high RPMs\u003c\/li\u003e\n  \u003cli\u003eUse included key and torque bolts to manufacturer's specs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FVRITO 10krpm aluminum flywheel kit is aimed at riders and DIY mechanics who want a straightforward performance upgrade for non-hemi Predator-style small engines. It suits hobbyists building faster mini bikes, go-karts, or clones who understand small-engine tuning, can perform basic installation and adjustments, and want a durable kit that includes valve springs and a spare plug for safer high-RPM operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this flywheel fit Predator 212 hemi engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This FVRITO flywheel is for non-hemi Predator-style engines only and will not fit hemi designs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are valve springs included and why are they needed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Two 22 lb valve springs are included to reduce valve float and support higher RPM operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55167622840663,"sku":"B0CN4K13ZJ","price":61.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-flywheel-front-view.jpg?v=1790389774"},{"product_id":"fvrito-atv-gas-tank-replacement-for-50-125cc-taotao-coolster-metal-250mm-mounting-includes-cap-filter","title":"FVRITO ATV Fuel Tank replacement for 50–125cc TaoTao Coolster — metal 250mm mounting, includes cap \u0026 filter","description":"\u003cp\u003e\u003cstrong\u003eFVRITO ATV Gas Tank is a direct-fit metal replacement fuel tank designed for most 50–125cc Chinese ATVs including TaoTao and Coolster models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-gauge metal petrol tank replaces worn or damaged tanks on a wide range of small-quads and youth ATVs. It ships with a vented cap, inline fuel filter, fuel line and clamps so you get a ready-to-install assembly. Dimensions and mounting-hole spacing are provided to help verify fitment before you buy, and the tank’s sealed metal construction reduces the risk of leaks that occur with brittle plastic tanks.\u003c\/p\u003e\n\n\u003ch3\u003eWhich ATV models and brands does this tank fit?\u003c\/h3\u003e\n\u003cp\u003eThe FVRITO tank is made to suit many Chinese-manufactured ATVs and buggies in the 50–125cc range. Compatibility covers popular entry-level and youth machines from brands commonly used as replacement parts platforms.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirectly compatible with TaoTao ATA and Boulder series models (110–125cc).\u003c\/li\u003e\n  \u003cli\u003eDesigned to fit Coolster 3050\/3125 series and many 110–125cc Coolster quads.\u003c\/li\u003e\n  \u003cli\u003eAlso fits brands such as Baja, Roketa, Sunl, Apollo, RPS, Vitacci, ICEbear, Kazuma, Kayo and similar Chinese ATVs.\u003c\/li\u003e\n  \u003cli\u003eCheck the supplied tank dimensions and 250 mm mounting-hole distance to confirm your specific model.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the tank’s dimensions and hardware details?\u003c\/h3\u003e\n\u003cp\u003ePhysical measurements and included hardware are listed so you can confirm fitment and install quickly. The tank’s footprint and mounting spacing are especially useful for DIY replacement projects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFuel tank length: 270 mm (10.63 in); width: 182 mm (7.17 in); height: 190 mm (7.48 in).\u003c\/li\u003e\n  \u003cli\u003eMounting hole center-to-center distance: 250 mm (9.84 in).\u003c\/li\u003e\n  \u003cli\u003ePackage includes: vented gas cap, fuel filter, fuel line, and four clips for hose securement.\u003c\/li\u003e\n  \u003cli\u003eMade from metal for improved sealing and resistance to cracking compared with many stock plastic tanks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation and maintenance look for this replacement tank?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone with basic ATV repair skills. The unit is supplied with the small parts needed to reconnect the fuel line and vent; standard hand tools are usually sufficient for the swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrain any remaining fuel and remove the old tank following your owner’s manual steps.\u003c\/li\u003e\n  \u003cli\u003eAlign the mounting holes using the 250 mm spacing and secure with existing or new mounting hardware.\u003c\/li\u003e\n  \u003cli\u003eAttach the supplied fuel line, inline filter and clamps; test for leaks by hand-tightening fittings and running a short engine test.\u003c\/li\u003e\n  \u003cli\u003eInspect the vent cap and replace periodically to prevent blockage from dirt or debris.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This FVRITO metal gas tank is intended for ATV owners and mechanics who need a durable, cost-effective replacement for 50–125cc Chinese quads — especially those riding TaoTao, Coolster and similarly configured models. It’s ideal for parents replacing tanks on youth ATVs, fleet owners keeping loaner machines running, and DIYers wanting a leak-resistant metal alternative to aging plastic tanks. Always verify the tank’s dimensions and mounting-hole spacing against your machine before purchase to ensure a proper fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this tank fit my 110cc TaoTao ATV?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Likely yes for many TaoTao 110\/125 models; verify the 250 mm mounting-hole spacing and tank dimensions against your machine.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include the fuel cap and hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the tank ships with a vented cap, fuel filter, fuel line and four clips for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55167864111447,"sku":"B08ZHLTVXP","price":57.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-atv-tank-front-view.jpg?v=1790394125"},{"product_id":"fvrito-vm22-26mm-carburetor-kit-for-predator-212-196cc-red-stage-1-with-38mm-air-filter","title":"FVRITO VM22 26mm Carburetor Kit for Predator 212\/196cc – Red Stage 1 with 38mm Air Filter","description":"\u003cp\u003e\u003cstrong\u003eThe FVRITO Performance VM22 26mm carburetor kit with 38mm air filter upgrades Predator 212cc\/196cc clone engines to improve throttle response and intake cleanliness for minibikes, go-karts, and small buggies.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis bolt-on Stage 1 kit combines a 26mm VM22-style carburetor with a large 38mm foam air filter, intake manifold, gaskets, fuel filter and mounting hardware to replace worn stock components and support higher airflow needs of 6.5–7 HP small engines. It’s designed for common clones of the Predator 212 and similar 196–200cc horizontal engines used in recreational powersports. The kit aims to deliver crisper throttle feel, more consistent running under load, and easier maintenance thanks to an oversized filter and included parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this carburetor kit affect throttle and engine response?\u003c\/h3\u003e\n\u003cp\u003eFitting the VM22 26mm carburetor gives a wider throttle bore than many stock carbs, which can improve airflow at mid-to-high engine speeds and sharpen throttle transitions. You’ll likely notice faster rev changes and fewer bogging moments when matching jetting is achieved.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e26mm venturi for increased airflow over small OEM carbs\u003c\/li\u003e\n  \u003cli\u003eAdjustable mixture and idle screws for tuning\u003c\/li\u003e\n  \u003cli\u003eIncludes gaskets and manifold for a sealed installation\u003c\/li\u003e\n  \u003cli\u003eBetter throttle feel when tuned to engine and load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the 38mm air filter protect the carburetor and help performance?\u003c\/h3\u003e\n\u003cp\u003eThe larger foam-style 38mm filter supplies greater volume of filtered air while trapping dust and grit before they reach the carb. Clean intake air reduces wear and helps maintain consistent fuel\/air mixture, which is especially useful on dirt tracks or dusty trails.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOversized foam element for higher dust-holding capacity\u003c\/li\u003e\n  \u003cli\u003eOpen design reduces restriction compared with tiny stock filters\u003c\/li\u003e\n  \u003cli\u003eEasy to remove, clean, and re-oil for long service life\u003c\/li\u003e\n  \u003cli\u003eHelps maintain steady engine performance under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich engines and machines is this kit compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis kit is built to adapt to widely used horizontal clone engines like Predator 212 and similar 196–200cc units found on minibikes, go-karts, and small off-road buggies. Fitment depends on intake flange pattern and overall space, so a quick size check before purchase is recommended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for Predator 212cc 6.5–7 HP and many 196–200cc clones\u003c\/li\u003e\n  \u003cli\u003eCommon fits: Coleman CT200U, BT200X, KT196, and many mini bike models\u003c\/li\u003e\n  \u003cli\u003eIncludes manifold and gasket set to match clone bolt patterns\u003c\/li\u003e\n  \u003cli\u003eConfirm flange spacing and throttle linkage clearance prior to install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what tools are required for installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with everything needed to replace the carb and filter assembly so you can install it quickly. Basic hand tools are sufficient for most installs, and the included wrench helps with the throttle\/throttle cable linkage and fuel line connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: VM22 26mm carburetor, 38mm foam air filter, fuel filter\u003c\/li\u003e\n  \u003cli\u003ePlus: intake manifold, full gasket set, mounting screws, small wrench\u003c\/li\u003e\n  \u003cli\u003eTools: common sockets, screwdrivers, pliers, and carb cleaner for prep\u003c\/li\u003e\n  \u003cli\u003eAllow time for jetting adjustments and a break-in check ride\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this upgrade is for: Riders and hobbyists who want a straightforward airflow and filtering improvement for 6.5–7 HP Predator-style engines — ideal for minibike builders, go-kart tuners, and trail riders who need crisper throttle behavior and better protection from dirt. If you run a clone engine and want an affordable, serviceable performance-oriented replacement carburetor and filter kit, this FVRITO Stage 1 package is designed to be a practical first upgrade. Always verify physical fit and be prepared to fine-tune jetting for your specific machine and altitude.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carb fit my Predator 212 engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s designed for Predator 212cc and many 196–200cc clones, but verify flange spacing and clearance before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need to rejet after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Usually yes; adjust jets for your altitude, fuel type, and load to ensure optimal performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55168273154391,"sku":"B08V8XVKXN","price":44.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-carburetor-front-view.jpg?v=1790397643"},{"product_id":"fvrito-foam-replacement-seat-for-50-110cc-youth-atvs-black-gripper-cover-thick-foam-bolt-on-kit","title":"FVRITO Foam Replacement Seat for 50–110cc Youth ATVs — Black Gripper Cover, Thick Foam \u0026 Bolt-On Kit","description":"\u003cp\u003e\u003cstrong\u003eFVRITO’s foam replacement seat is a complete, soft-cushion aftermarket seat designed to fit many 50cc–110cc Chinese ATVs and youth quads, supplying improved comfort and a direct bolt-on style mounting for compatible models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mini quad’s original seat is worn, cracked, or uncomfortable, this FVRITO foam seat offers a full replacement including base, foam, gripper cover and mounting brackets. It’s built to suit a long list of 4-wheeler models — Taotao, Coolster, Vitacci, Roketa and similar Chinese-made ATVs — and is intended for riders of youth and small adult machines in the 50cc–110cc range.\u003c\/p\u003e\n\n\u003ch3\u003eWhich ATV models will this FVRITO seat fit?\u003c\/h3\u003e\n\u003cp\u003eThis seat is engineered to match many popular Chinese mini-quad frames. The fit covers a broad catalogue of 50cc to 110cc machines, but it’s not guaranteed for 125cc models without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: Taotao Boulder B1, Coolster 3050C\/3050D, X-PRO Bolt 110, Vitacci HAWK 110\/RXR 110, Bamboo 110, RPS Raider 6, Icebear Dyno-R 110, MotoTec Rex 110, Veloz ATV06, Mountopz 110, and similar 50–110cc quads.\u003c\/li\u003e\n  \u003cli\u003eCompatibility spans brands: Taotao, Coolster, X-PRO, Roketa, Vitacci, Yamoto, Sunl, Jetmoto, Alpine, Bamboo, Mudcat, RPS, ICEbear, MotoTec, Peace, BMS, Mountopz, and others.\u003c\/li\u003e\n  \u003cli\u003eNot a direct fit for most 125cc models; minor trimming of two underside latch bumps may be necessary on some 125cc frames.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow comfortable and durable is the FVRITO foam seat?\u003c\/h3\u003e\n\u003cp\u003eThe seat combines thick, soft foam with a rigid internal panel and a gripper-style cover to improve rider comfort and keep the cover stable under load. Double-stitched seams add strength and reduce tearing on typical off-road use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThickened foam cushion for better shock absorption on bumpy terrain.\u003c\/li\u003e\n  \u003cli\u003eDouble-stitched vinyl cover reduces wear and slippage during acceleration and cornering.\u003c\/li\u003e\n  \u003cli\u003eRigid base plate maintains shape and consistent mounting alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the seat dimensions and what does the kit include?\u003c\/h3\u003e\n\u003cp\u003eMeasure your original seat and mounting points to confirm fitment before ordering; match the length and width measurements noted here. The replacement ships as a full assembly to simplify installation on compatible quads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall length: 500 mm (19.69 inches).\u003c\/li\u003e\n  \u003cli\u003eWidth: tapers from 195 mm (7.68 in) to 160 mm (6.3 in).\u003c\/li\u003e\n  \u003cli\u003eIncluded: molded base, foam padding, gripper seat cover, and mounting brackets for bolt-in installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill installation require special tools or modifications?\u003c\/h3\u003e\n\u003cp\u003eMost installations are straightforward and use the provided mounting brackets and existing bolt holes on compatible frames. Some 125cc frames or non-standard mounts may need small plastic trim adjustments for a snug fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard hand tools usually suffice: socket set, screwdrivers, and trim knife for minor adjustments.\u003c\/li\u003e\n  \u003cli\u003eIf two small underside latch bumps interfere, careful trimming provides clearance.\u003c\/li\u003e\n  \u003cli\u003eAlways compare mounting points and measure before cutting or drilling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This FVRITO replacement foam seat is aimed at owners of Chinese-made 50cc–110cc ATVs and youth quads who want a ready-to-install seat that improves cushioning and durability over aged or damaged stock seats. It suits riders upgrading comfort on Taotao, Coolster, Vitacci, Roketa, Icebear and similar models, plus small-adult or teen riders wanting a more secure, grippy cover. If you’re running a 125cc machine, check measurements and expect potential minor modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this seat fit my 125cc ATV?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This FVRITO seat is designed for 50–110cc models; some 125cc frames may require trimming of two underside latch bumps for a snug fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the seat ships complete with base, foam, gripper cover and mounting brackets for bolt-on installation on compatible quads.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55168354812247,"sku":"B08Z6X62VB","price":68.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-seat-front-profile.jpg?v=1790401494"},{"product_id":"fvrito-hydraulic-disc-brake-kit-for-baja-db30-doodle-bug-180mm-stainless-rotor-pre-bled","title":"FVRITO Hydraulic Disc Brake Kit for Baja DB30 \u0026 Doodle Bug — 180mm Stainless Rotor, Pre‑bled","description":"\u003cb\u003eFVRITO’s Mini Bike Hydraulic Disc Brake Kit is a complete hydraulic stopping system—master cylinder, caliper, pads, 180mm stainless rotor and hose—designed to replace weak mechanical brakes on Baja DB30, Doodle Bug, Blitz and similar 97cc–212cc mini bikes.\u003c\/b\u003e\n\n\u003cp\u003eThis kit upgrades small-frame mini bikes from hand-tiring cable systems to a hydraulic setup that delivers smoother, stronger braking with less lever effort. It’s built around a 180mm stainless rotor and a compact caliper assembly that fits many Baja Doodle Bug and Blitz models. The package is intended for hobbyists and mechanics who want a tighter feel and more consistent braking performance without a full-frame redesign.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hydraulic kit improve braking compared with the original mechanical setup?\u003c\/h3\u003e\n\u003cp\u003eHydraulic systems transfer force through fluid, which reduces the hand pressure needed to achieve the same stopping power and provides more consistent modulation at the lever. That means quicker response and a firmer feel under load, especially useful on heavier riders or steeper terrain.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHydraulic master cylinder replaces cable pull with fluid actuation for smoother response.\u003c\/li\u003e\n  \u003cli\u003e180mm stainless rotor increases rotor surface area for better heat tolerance and stopping force.\u003c\/li\u003e\n  \u003cli\u003ePre-bled caliper and pads reduce installation time and initial adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich mini bikes and engines will this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit is intended for Baja Doodle Bug, Baja Blitz, DB30 and comparable mini bikes with 97cc, 79cc or 212cc (2.8 HP) engines. It’s not a universal, bolt-on swap for every small bike; some frames require modified mounting points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Baja Doodle Bug, Blitz, DB30 and many 97cc\/79cc mini bikes.\u003c\/li\u003e\n  \u003cli\u003eEngine compatibility: suitable for 97cc, 79cc, 212cc and 2.8 HP Predator-style engines.\u003c\/li\u003e\n  \u003cli\u003eNote: Not a direct replacement for Coleman CT100U—may need bracket relocation or cutting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specs and physical dimensions I should check before buying?\u003c\/h3\u003e\n\u003cp\u003eConfirm the caliper mounting center spacing, handlebar lever perch diameter and hose routing clearances before purchase. These dimensions determine whether the kit bolts up cleanly or if minor frame or bracket changes are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCaliper mounting hole center spacing: 45mm (1.77\").\u003c\/li\u003e\n  \u003cli\u003eBrake hose overall length: 1100mm (43.31\") for flexible routing.\u003c\/li\u003e\n  \u003cli\u003eBrake lever perch diameter: 22mm (0.87\"); banjo bolt size: M10x1.25.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I watch for during fitment?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic mini bike maintenance. Tighten handlebar fasteners evenly and avoid over-torquing the lever perch or banjo fittings; incorrect force can damage components or create leaks. If your frame lacks a compatible mounting tab you may need to fabricate or relocate a mount.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for simple clamp-on lever and caliper mounting with existing fork or swingarm tabs.\u003c\/li\u003e\n  \u003cli\u003ePre-installed pads and sealed caliper minimize initial bleeding; verify fluid level and lever travel after fitting.\u003c\/li\u003e\n  \u003cli\u003eUse correct torque values on banjo bolts and handlebar screws; avoid overtightening the lever clamp.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This FVRITO kit is aimed at mini bike owners who want a clear step-up from cable disc brakes—riders who value stronger stopping power, reduced hand fatigue and better control. It’s a good match for hobbyists, weekend racers and DIY mechanics running Baja Doodle Bug, Blitz, DB30 or similar 97cc–212cc machines who can perform minor frame adjustments if required. If you ride frequently on uneven terrain, carry heavier loads or want more predictable braking, this hydraulic upgrade provides tangible benefits without a full chassis overhaul.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my Baja Doodle Bug without modifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits many Baja Doodle Bug and Blitz models, but some frames need mount relocation or minor modification; not a direct CT100U swap.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit come pre-bled and ready to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The caliper and hose come assembled and typically require minimal bleeding, but check fluid level and lever feel after installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55168367067479,"sku":"B0CL4SFG2W","price":51.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-assembly-overview.jpg?v=1790401888"},{"product_id":"fvrito-vm22-26mm-carburetor-kit-for-predator-212-196cc-clones-26mm-bore-filter-manifold","title":"FVRITO VM22 26mm Carburetor Kit for Predator 212\/196cc Clones — 26mm Bore, Filter \u0026 Manifold","description":"\u003cp\u003e\u003cstrong\u003eFVRITO VM22 is a 26mm replacement carburetor kit designed to fit 212cc and 196cc clone engines—improving throttle response and providing a larger, cleaner air supply for mini bikes, go-karts, and small OHV engines.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis all-in-one kit pairs a VM22 26mm carburetor with an upgraded air filter, fuel filter, manifold, gaskets, mounting screws and a wrench so you can replace or upgrade your engine's intake components in one session. The parts are intended to match common Predator 212cc and 196cc clones and compatible small-engine models used in off-road toys and utility machines. Because larger displacement engines demand greater air volume and cleaner intake, this kit focuses on helping the carb receive steadier airflow and reduce debris ingestion.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this carburetor improve throttle and performance?\u003c\/h3\u003e\n\u003cp\u003eSwapping in the VM22 26mm carb gives a wider central bore and more precise throttle metering than many stock clone carbs. That leads to crisper throttle response and can help the engine make steadier power across the rev range when tuned properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e26mm bore increases air\/fuel flow compared with smaller stock carbs\u003c\/li\u003e\n  \u003cli\u003eIncludes main and idle jets matched for typical 212\/196cc setups\u003c\/li\u003e\n  \u003cli\u003eBetter transient response for rapid throttle openings\u003c\/li\u003e\n  \u003cli\u003eComes with a wrench and gaskets for straightforward replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my Predator 212 or similar clone engine?\u003c\/h3\u003e\n\u003cp\u003eThe kit is produced to match common Predator 212\/6.5 HP and 196cc clone manifolds and typical mini-bike\/go-kart applications. Fitment depends on manifold flange spacing and mounting hole alignment, so a quick size check is recommended before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to adapt to many Predator 212\/6.5HP and 196cc clones\u003c\/li\u003e\n  \u003cli\u003eIncludes manifold and mounting screws for common bolt patterns\u003c\/li\u003e\n  \u003cli\u003eCheck flange dimensions and intake bore to confirm fit\u003c\/li\u003e\n  \u003cli\u003eNot guaranteed for every aftermarket engine—verify measurements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts come in the package and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eThe kit is comprehensive—carburetor, air and fuel filters, manifold, a set of gaskets, mounting screws, and a small wrench. Basic hand tools and time for carburetor synchronization and tuning will be required for best results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: 1 carburetor, 1 air filter, 1 fuel filter, 1 manifold\u003c\/li\u003e\n  \u003cli\u003eAlso includes gaskets, mounting screws, and a small wrench\u003c\/li\u003e\n  \u003cli\u003eRecommended tools: socket set, screwdriver, basic tuning tools\u003c\/li\u003e\n  \u003cli\u003eExpect to set idle and mixture for optimal running after install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain and tune the VM22 for reliability?\u003c\/h3\u003e\n\u003cp\u003eRoutine inspections and proper jetting adjustments will keep the carb running well. Clean the air filter regularly, drain or replace the fuel filter if fuel quality is poor, and verify gasket seals to prevent air leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean or replace air filter depending on riding conditions\u003c\/li\u003e\n  \u003cli\u003eReplace fuel filter if contamination or flow issues appear\u003c\/li\u003e\n  \u003cli\u003eCheck for vacuum leaks at gaskets and manifold connections\u003c\/li\u003e\n  \u003cli\u003eAdjust idle and main jets to match altitude and fuel type\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FVRITO VM22 kit is aimed at hobbyists and riders who operate mini bikes, go-karts, and small off-road machines powered by Predator-style 212cc or 196cc clone engines and want an affordable upgrade path. It's suited for DIY mechanics familiar with carb replacement and basic tuning who need a complete kit—including filters and mounting hardware—to improve airflow and maintain cleaner fuel delivery. Verify fitment by comparing your engine's intake flange and bolt pattern before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the VM22 fit Predator 212 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the VM22 is designed to adapt to many Predator 212\/212cc and similar 196cc clone engines, but confirm your manifold flange and bolt pattern first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tuning is required after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Adjust idle and main jets for local altitude and fuel; check for vacuum leaks and clean the air filter before first ride.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55168549060951,"sku":"B0915GQ64R","price":47.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-vm22-carb-front-view.jpg?v=1790407856"},{"product_id":"fvrito-12-5x2-25-tire-inner-tube-kit-2-tires-2-tubes-tr13-valves-repair-kit","title":"FVRITO 12.5x2.25 Tyre \u0026 Inner Tube Kit — 2 Tyres, 2 Tubes, TR13 Valves, Repair Kit","description":"\u003cp\u003e\u003cstrong\u003eThe FVRITO 12.5 x 2.25 tire and inner tube kit is a heavy-duty replacement set designed to fit 12.5\" (12 1\/2 x 2 1\/4, 57-203\/62-203) scooter and small e-bike rims, supplying two tires, two tubes and a full valve and patch repair kit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you ride a Razor Pocket Mod (Bella, Betty, Chrissy, etc.), a Razor MX dirt rocket, or a range of 12\" wheel electric scooters and mini e-bikes, this FVRITO kit gives a complete spare set to get you back on the road quickly. Built from durable rubber with TR13 straight valve stems, the package includes replacement tires, inner tubes and practical repair tools so you can fix flats and maintain airtight seals without hunting for parts.\u003c\/p\u003e\n\n\u003ch3\u003eWill these tires fit my scooter or mini dirt bike?\u003c\/h3\u003e\n\u003cp\u003eThese tires are sized to match wheels using a 12.5 inch outer diameter and an 8 inch inner rim diameter, commonly labeled 12.5 x 2.25 or 12 1\/2 x 2 1\/4. They are compatible with multiple model lines, but rim width and valve type must match to ensure proper installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSize labels covered: 12.5x2.25, 12 1\/2 x 2 1\/4, 57-203, 62-203.\u003c\/li\u003e\n  \u003cli\u003eFits many Razor Pocket Mod models (Bella, Betty, Blossom, etc.) and MX125\/MX350\/MX400.\u003c\/li\u003e\n  \u003cli\u003eAlso suits mini dirt bikes, kids motorbikes, e-trikes, wheelchairs and carts with 12\" rims.\u003c\/li\u003e\n  \u003cli\u003eVerify rim diameter and valve stem type (TR13 straight valve) before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and how does it help with maintenance?\u003c\/h3\u003e\n\u003cp\u003eThe FVRITO set is sold as a comprehensive repair-and-replacement bundle so you won't need extra parts right away. Included tools and spare cores let you perform common tube repairs and swap valves without a trip to a specialty shop.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 tires and 2 inner tubes for immediate replacement of both sides.\u003c\/li\u003e\n  \u003cli\u003eValve accessories: TR13 straight valve stems, extra brass cores, red and black caps.\u003c\/li\u003e\n  \u003cli\u003eRepair items: valve core wrench, adhesive patches and a metal rasp for prepping punctures.\u003c\/li\u003e\n  \u003cli\u003eNote: kit uses straight (TR13) valves — bent valves may not be compatible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and airtight are these tires and tubes?\u003c\/h3\u003e\n\u003cp\u003eManufactured from premium rubber compounds, the tires are built to resist aging and provide reliable sealing and shock absorption for small electric vehicles. The included valve hardware and spare cores help preserve airtightness after installation and during roadside repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium rubber for better elastic rebound and longer wear life versus generic compounds.\u003c\/li\u003e\n  \u003cli\u003eTR13 straight valve design with spare cores for secure inflation and sealing.\u003c\/li\u003e\n  \u003cli\u003eRepair patches and tools included to restore inner tube airtightness after punctures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I check compatibility before ordering?\u003c\/h3\u003e\n\u003cp\u003eConfirm your wheel's rim inner diameter and the tire size stamped on your current tire or the vehicle manual. Also check whether your wheel uses a straight valve stem; this kit uses TR13 straight valves and will not fit bent-stem applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure or locate rim code confirming 12.5\" outer and 8\" inner dimensions.\u003c\/li\u003e\n  \u003cli\u003eCompare stamped tire labeling to 12.5x2.25 \/ 57-203 \/ 62-203 codes.\u003c\/li\u003e\n  \u003cli\u003eVerify your valve stem type — straight TR13 required for this kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This FVRITO tire and tube kit is aimed at owners of small electric scooters, mini dirt bikes and kids’ motorbikes that use 12.5\" wheels who want a ready-to-install replacement set and repair kit. It's also useful for parents, fleet operators, and DIY mechanics who value having spare tubes, valves and patching tools on hand to minimize downtime from flats or worn tires.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit use straight or bent valves?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This set uses TR13 straight valve stems; it will not fit bent-valve wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these tires fit my Razor MX350 or MX125?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the 12.5x2.25 (57-203 \/ 62-203) size fits many MX125 and MX350 models; confirm rim size first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55168556532055,"sku":"B0G5FPBBKP","price":69.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-packaging-and-contents.jpg?v=1790408130"},{"product_id":"fvrito-vm22-26mm-carburetor-kit-for-predator-196-200-212-224cc-38mm-air-filter-10-jets-50-throttle-cable","title":"FVRITO VM22 26mm Carburetor Kit for Predator 196\/200\/212\/224cc — 38mm Air Filter, 10 Jets \u0026 50\" Throttle Cable","description":"\u003cstrong\u003eFVRITO's VM22 carburetor kit is a full replacement and upgrade package that fits Predator 212\/196\/224cc and many OHV clone mini bike engines, supplying a carburetor, throttle assembly, air filter and ten tuning jets.\u003c\/strong\u003e\n\n\u003cp\u003eIf you're rebuilding or improving a small-engine minibike, go-kart, or utility engine that uses Predator-style OHV clones (196–224cc), this FVRITO kit bundles the key parts you need. It replaces the stock carburetor with a 26mm VM22 unit, adds a 38mm air filter and intake, includes a 50\" twist throttle cable and on\/off switch, and gives ten main jets so you can tune fuel delivery for different conditions.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor kit fit my Predator 212 or similar clone engine?\u003c\/h3\u003e\n\u003cp\u003eYes — the VM22 setup was designed to work with a wide range of small OHV clone engines, including Predator 224\/212\/200\/196cc and compatible Honda GX160\/GX200 clones. Check flange and intake dimensions to confirm fit before installation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Predator 212\/224\/196\/200cc clones and similar OHV engines\u003c\/li\u003e\n\u003cli\u003eIncludes a 26mm carb and 26mm intake manifold pipe for common bolt patterns\u003c\/li\u003e\n\u003cli\u003eWorks on go-karts, mini bikes, Trail 200 variants, Baja\/MB200 models and some pumps\u003c\/li\u003e\n\u003cli\u003eConfirm mounting hole alignment and throttle cable routing on your frame\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the kit improve performance or tuning options?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies ten different main jets so you can adjust air–fuel ratio for altitude, load, and aftermarket exhaust or air filters. The 38mm air filter and 26mm carb help atomize fuel more evenly than worn stock units, which can smooth throttle response.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTen jets (#88–#125) let you richen or lean the main jet in controlled steps\u003c\/li\u003e\n\u003cli\u003e38mm air filter increases airflow compared with clogged stock elements\u003c\/li\u003e\n\u003cli\u003e26mm throttle bore balances low-end tractability with higher-RPM power\u003c\/li\u003e\n\u003cli\u003eIncludes fuel filter and gaskets for cleaner fuel and simple installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and what tools will I need to install it?\u003c\/h3\u003e\n\u003cp\u003eThe package is comprehensive: carburetor, air filter, intake manifold pipe, twist throttle set, on\/off switch, throttle cable, assorted jets, and mounting hardware. Basic hand tools are all that’s required for most installs, plus a method to tune jets once installed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncluded: VM22 26mm carb, 38mm air filter, 26mm manifold, 50\" throttle cable\u003c\/li\u003e\n\u003cli\u003eAlso included: twist throttle, on\/off switch, fuel filter, grips, gaskets, nuts and screws\u003c\/li\u003e\n\u003cli\u003eTools: screwdrivers, wrenches, pliers, and a basic tachometer or ride-testing for tuning\u003c\/li\u003e\n\u003cli\u003eKeep spare gaskets and a fuel-safe sealant handy for secure mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I choose the right main jet from the ten supplied?\u003c\/h3\u003e\n\u003cp\u003eSelect jets based on altitude, temperature, load, and exhaust modifications. Start near the stock jet size for your engine, observe plug color and throttle response, then step up or down the jet list to reach a neutral spark plug appearance and smooth running under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigher jet numbers increase fuel flow (richer), lower numbers lean the mixture\u003c\/li\u003e\n\u003cli\u003eAt altitude or with less load, try a smaller jet; with heavy loads or aftermarket exhaust, try larger jets\u003c\/li\u003e\n\u003cli\u003eUse plug color and throttle behavior as primary tuning feedback\u003c\/li\u003e\n\u003cli\u003ePerform incremental changes and test under the engine's typical operating conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FVRITO VM22 Mini Bike Carburetor Kit is aimed at DIY mechanics, minibike and go-kart owners, small-engine repair shops, and hobbyists who need a drop-in carb replacement with tuning flexibility. It's practical for anyone upgrading a Predator-style OHV clone engine on Trail 200 family bikes, Baja\/Massimo\/Motovox MB200 variants, or similar 196–224cc platforms who wants a complete throttle-and-jet solution in one purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this VM22 kit fit a Predator 212 engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The VM22 kit is compatible with Predator 212\/224\/196\/200cc OHV clones, but verify mounting flange and throttle cable routing for your model.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the tuning jets included sufficient for altitude adjustments?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Ten main jets (#88–#125) allow stepwise tuning for altitude, load, and exhaust changes to help reach correct air-fuel mix.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55168558367063,"sku":"B0CNPCXYFM","price":57.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvirti-vm22-carburetor-front-view.jpg?v=1790408189"},{"product_id":"fvrito-dirt-bike-fuel-tank-for-crf50-xr50-ssr-3-5l-abs-replacement-with-cap-filter","title":"FVRITO Dirt Bike Fuel Tank for CRF50 XR50 SSR 3.5L ABS Replacement with Cap \u0026 Filter","description":"\u003cstrong\u003eReplacement 3.5L ABS fuel tank for small-displacement pit and dirt bikes designed to fit many CRF50, XR50, SSR, and Chinese-made 50–160cc frames.\u003c\/strong\u003e\n\n\u003cp\u003eThis FVRITO dirt bike gas tank is a direct-fit aftermarket replacement crafted from rugged ABS plastic to restore reliable fuel storage on 50cc–125cc and similar pit bikes. It ships with the cap, fuel filter, line, clips and vent cap so you can swap tanks without hunting for extra parts. Before ordering, compare the mounting hole distance and overall dimensions to your bike to confirm compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWill this tank fit my CRF50, XR50, SSR or other small pit bike?\u003c\/h3\u003e\n\u003cp\u003eYes — the tank was designed to match the mounting patterns used by many miniature Honda-style frames and a wide range of Chinese-made copies. It suits numerous 50cc to 160cc models from brands like SSR, YCF, Thumpstar, Taotao, Coolster and more, but it does not fit full-size Honda models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits: CRF50, XR50, CRF50F and many Chinese replicas\u003c\/li\u003e\n  \u003cli\u003eCompatible SSR models: SR70, SR110, SR125 variants listed by manufacturers\u003c\/li\u003e\n  \u003cli\u003eAlso works with brands: Kayo, BSE, Pitster Pro, SDG, Taotao, Coolster\u003c\/li\u003e\n  \u003cli\u003eNot compatible with larger adult Hond* models — verify measurements first\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the tank's dimensions and fuel capacity?\u003c\/h3\u003e\n\u003cp\u003eThis replacement tank holds 3.5 liters (0.92 gallons) and is sized for small-frame pit bikes. The compact footprint and specific mounting hole spacing make it suitable for tight frames commonly found in youth and trail machines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 3.5L (0.92 gallon)\u003c\/li\u003e\n  \u003cli\u003eMounting hole distance: 220 mm (8.66 in)\u003c\/li\u003e\n  \u003cli\u003eLength x Width x Height: 265 x 251 x 200 mm (10.43 x 9.88 x 8.77 in)\u003c\/li\u003e\n  \u003cli\u003eConfirm these numbers against your bike before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and hardware are included with the tank?\u003c\/h3\u003e\n\u003cp\u003eThe tank is molded from durable ABS plastic chosen for impact resistance and sealing properties. The package bundles practical hardware so you receive everything needed to install the tank and connect fuel lines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: hard ABS plastic for strength and fuel resistance\u003c\/li\u003e\n  \u003cli\u003eIncluded: tank cap, fuel filter, fuel line, 4 mounting clips and vent cap\u003c\/li\u003e\n  \u003cli\u003ePrevents common leaks when installed correctly with supplied parts\u003c\/li\u003e\n  \u003cli\u003eDesigned for routine replacement and field serviceability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I check before fitting?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for most mechanically inclined riders: drain old fuel, remove the old tank, fit the FVRITO tank using the supplied clips and connect the fuel line and vent. Simple hand tools are normally sufficient, but verify hose routing and tank clearance before riding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools: basic hand tools (screwdrivers, socket\/wrench set) usually suffice\u003c\/li\u003e\n  \u003cli\u003ePrep: drain fuel and remove old tank safely before installing\u003c\/li\u003e\n  \u003cli\u003eVerify: secure vent line routing and ensure no contact with hot\/exhaust areas\u003c\/li\u003e\n  \u003cli\u003eTest: check for leaks after installation and before first ride\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Riders, mechanics and parents who need an affordable, ready-to-install replacement fuel tank for youth and small-displacement pit bikes will find this FVRITO tank ideal. It suits repair shops and hobbyists replacing cracked or leaking OEM tanks on CRF50\/XR50-style bikes and numerous Chinese-made equivalents. Always confirm dimensions and model compatibility before ordering to ensure a trouble-free fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the fuel capacity of this FVRITO tank?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The tank holds 3.5 liters (0.92 gallons).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it include the fuel line and cap?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the package includes a cap, fuel filter, fuel line, four clips and a vent cap.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55168745636183,"sku":"B08ZCY1CRK","price":73.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-view-tank.jpg?v=1790413041"},{"product_id":"fvrito-vm22-26mm-carburetor-kit-for-196-224cc-clone-engines-complete-throttle-assembly-with-jets-filter","title":"FVRITO VM22 26mm Carburetor Kit for 196–224cc Clone Engines — Complete Throttle Assembly with Jets \u0026 Filter","description":"\u003cp\u003e\u003cstrong\u003eThe FVRITO VM22 26mm carburetor kit is a complete throttle assembly upgrade designed to replace or improve carb performance on Predator 212\/196\/224cc and many 6.5HP clone small engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one package includes a 26mm VM22 carburetor plus throttle cable, assortment of main jets, intake pipe, air filter and the hardware needed to install on popular mini bike, go-kart and small utility engines. It’s engineered to fit a wide range of OHV clone motors — including Predator, GX160\/GX200-style clones, and many Trail\/CT200\/MB200 platforms — so you can restore throttle response, tune fuel delivery, and simplify maintenance without buying separate parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhat engines and vehicles will this carburetor fit?\u003c\/h3\u003e\n\u003cp\u003eThe VM22 kit is built for 26mm intake applications common to 196–224cc single-cylinder OHV clone engines. It’s compatible with Predator 212\/200\/196, GX160\/GX200 style 6.5HP clones and many recreational brands that use those engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePredator 212cc \/ 196cc and similar clone engines\u003c\/li\u003e\n  \u003cli\u003eCT200U, BT200X, MB200-series mini bikes and go-karts\u003c\/li\u003e\n  \u003cli\u003eSome small water pumps, pressure washers and utility equipment using compatible engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the included jet assortment help tuning performance?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies ten main jets in graduated sizes so you can tailor fuel flow to altitude, load, and engine modifications. Swapping jets changes the air\/fuel ratio to help achieve smoother idling, stronger midrange, or more consistent top-end power depending on needs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTen sizes (#88–#125) to incrementally adjust fuel delivery\u003c\/li\u003e\n  \u003cli\u003eEasier troubleshooting of lean or rich conditions without guessing\u003c\/li\u003e\n  \u003cli\u003eHelps tune for elevation or added engine accessories like exhausts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hardware and accessories are included for installation?\u003c\/h3\u003e\n\u003cp\u003eThis kit arrives with the essential pieces to mount and connect the carburetor so you can get running quickly. Fasteners, gaskets, throttle components and a replacement air cleaner remove the need to source extra parts for most swaps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e26mm intake pipe, 38mm air filter and foam element\u003c\/li\u003e\n  \u003cli\u003e50\" throttle cable, twist throttle, on\/off start switch and handlebar grips\u003c\/li\u003e\n  \u003cli\u003eFuel filter, wrenches, screws, nuts and gaskets for a complete install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this carburetor improve drivability or engine life?\u003c\/h3\u003e\n\u003cp\u003eWhile results vary with engine condition and setup, the VM22 is intended to provide steadier fuel atomization and more consistent throttle response compared with aged or clogged stock carbs. Proper jet selection and tuning are required to optimize performance and avoid running conditions that could harm the engine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBetter fuel metering when jetted for your specific setup\u003c\/li\u003e\n  \u003cli\u003eReplacement air filter helps protect internals from debris\u003c\/li\u003e\n  \u003cli\u003eComplete throttle assembly reduces installation errors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This carburetor kit is aimed at DIY mechanics, mini-bike and go-kart owners, and small-engine repair shops that need a drop-in replacement or upgrade for 196–224cc OHV clone engines. It’s especially useful if you want a single purchase that includes jets, throttle hardware and mounting bits to get a machine back on the trail or track without multiple orders. If you operate at different elevations, race or modify your exhaust\/intake, the included jet set enables practical tuning to match your changes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this carburetor a direct bolt-on for Predator 212 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits many Predator 212\/196 clone engines but may need the included intake pipe or minor adjustments for perfect alignment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the jets come labeled for easy tuning?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the ten main jets are different sizes and marked, so you can swap and test to match altitude and load.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55169016299863,"sku":"B0CHJNF7X7","price":57.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-vm22-carburetor-front-view_39f8213f-1163-4ad1-a1a8-2d678788fb73.jpg?v=1790416857"},{"product_id":"fvrito-high-performance-exhaust-muffler-assembly-for-70-125cc-crf50-xr50-bikes-one-piece-kit-with-removable-heat-shield","title":"FVRITO High-Performance Exhaust Silencer Assembly for 70–125cc CRF50 XR50 Bikes — One-Piece Kit with Removable Heat Shield","description":"\u003cstrong\u003eFVRITO's complete high-performance exhaust muffler assembly replaces stock systems on many 70–125cc mini dirt bikes to produce a deeper tone and improved flow.\u003c\/strong\u003e\n\nThis one-piece system includes the head pipe and tail section, mounting hardware, gaskets and a removable heat shield so you can swap the factory exhaust for a more durable, better-sounding option that fits a wide range of CRF50-style and Chinese 4-stroke mini motocross bikes. The kit is designed for bolt-on installation on compatible frames and engines commonly found on CRF50, XR50 and many 70–125cc Chinese models.\n\n\u003ch3\u003eWill this exhaust fit my bike model and engine size?\u003c\/h3\u003e\n\u003cp\u003eConfirm compatibility by comparing your bike model and engine displacement with the listed fitment. The system is intended for many CRF50\/XR50 style bikes and a variety of Chinese-manufactured 70cc–125cc 4-stroke machines, but it does not fit XR100x, XR70, CRF70F or certain RFZ 125 variants.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits: CRF50, XR50, CRF70 XL70 (with exclusions noted)\u003c\/li\u003e\n\u003cli\u003eCompatible brands: Apollo DBx14\/DBx18, SSR SR110\/SSR125, Tao Tao, Lifan and many clones\u003c\/li\u003e\n\u003cli\u003eNot compatible: XR100x, XR70, CRF70F and some RFZ 125 models\u003c\/li\u003e\n\u003cli\u003eMeasure head and eye-to-eye dimensions if unsure before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation and included hardware look?\u003c\/h3\u003e\n\u003cp\u003eThe kit is supplied as a complete assembly from head pipe to tail with the necessary gaskets, fasteners and a metal clip so installation is straightforward for someone with basic mechanical skills. No separate muffler purchase is required; you’ll get hardware to attach the system to standard mount points.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePackage includes: muffler, head pipe, metal clip, black rubber gasket, two gaskets and a screw kit\u003c\/li\u003e\n\u003cli\u003eComes with a removable pipe guard for added protection\u003c\/li\u003e\n\u003cli\u003eIntended for bolt-on replacement using factory mounting points\u003c\/li\u003e\n\u003cli\u003eSimple hand tools typically required for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and sound differences should I expect?\u003c\/h3\u003e\n\u003cp\u003eThis exhaust is engineered to improve exhaust flow and give mini bikes a deeper, throaty tone similar to larger CRF-style machines, while remaining appropriate for mildly modified or stock engines. It can change throttle response and the note of the bike without requiring major engine work.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDeeper, fuller exhaust sound compared to many stock mini mufflers\u003c\/li\u003e\n\u003cli\u003eEnhanced flow for improved engine breathing on mild mods\u003c\/li\u003e\n\u003cli\u003eRemovable guard helps protect the pipe during off-road use\u003c\/li\u003e\n\u003cli\u003eNot a guaranteed horsepower kit; effects vary by bike and tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key dimensions and durability features?\u003c\/h3\u003e\n\u003cp\u003eThe assembly features a 28mm head pipe diameter and a 45mm eye-to-eye mounting spacing, plus a removable pipe guard for abrasion resistance. Materials and construction suit off-road use but always check fitment and clearances on your specific frame and swingarm.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHead pipe diameter: 28mm\u003c\/li\u003e\n\u003cli\u003eEye-to-eye mount spacing: 45mm\u003c\/li\u003e\n\u003cli\u003eIncludes removable pipe guard for heat and impact protection\u003c\/li\u003e\n\u003cli\u003eComplete unit from head pipe to tail for a clean installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for\n\nThis FVRITO exhaust kit is aimed at riders who own CRF50\/XR50-style mini dirt bikes or compatible Chinese 70–125cc 4-stroke machines and want a stronger exhaust note, improved flow characteristics, and a complete bolt-on replacement. If you need a full one-piece system with hardware included for a common mini-moto setup and you’re comfortable checking fitment details, this kit offers a practical upgrade for trail riders, backyard racers and youth motocross enthusiasts. Please verify model compatibility and measurements before purchase or contact the seller for fitment help.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this exhaust fit CRF70 or XR70 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It fits CRF50\/XR50-style bikes and many 70–125cc Chinese models but excludes XR70 and CRF70F.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A complete muffler assembly, head pipe, metal clip, black rubber gasket, two gaskets and a screw kit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55169054409047,"sku":"B0B5X33G1Z","price":85.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-exhaust-front-assembly-gold.jpg?v=1790417693"},{"product_id":"fvrito-28mm-exhaust-muffler-kit-for-70-125cc-pit-dirt-bikes-double-layer-stainless-removable-guard-black","title":"FVRITO 28mm Exhaust Silencer Kit for 70–125cc Pit\/Dirt Bikes — Double-Layer Stainless, Removable Guard (Black)","description":"\u003cp\u003e\u003cstrong\u003eThe FVRITO 28mm Exhaust Pipe Muffler Silencer Kit is a complete replacement exhaust system engineered for 70cc–125cc Chinese-style pit and dirt bikes, delivering a durable double-layer stainless muffler, deeper sound, and plug-and-play hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you ride or repair small-displacement pit bikes (70cc, 110cc, 125cc) like XR50\/CRF50 clones, Coolster, SSR, Taotao and similar models, this FVRITO exhaust kit replaces the entire run from manifold to tailpipe. It combines corrosion-resistant double-layer stainless construction with a removable guard and comprehensive mounting hardware so you can swap the assembly without sourcing extra parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit fit my 125cc or 110cc pit bike?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed for many Chinese-manufactured 70–125cc pit and dirt bikes, matching a 28mm head diameter and a 45mm end-to-end spacing for common small-engine headers. It won’t fit every model—double-check head diameter and manifold fitment before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 70cc, 110cc, 125cc pit bikes with 28mm head diameter\u003c\/li\u003e\n  \u003cli\u003eCompatible with many Chinese brands: CRF50\/XR50-style, Coolster, SSR, Taotao, Apollo, Roketa and more\u003c\/li\u003e\n  \u003cli\u003eNot compatible with full-size Hondas or non-matching head diameters\u003c\/li\u003e\n  \u003cli\u003eIncludes gasket and mounting screws for direct replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction ensure durability?\u003c\/h3\u003e\n\u003cp\u003eFVRITO built this exhaust as a single integrated system from the head pipe through the tail, with a double-layer stainless steel muffler core to resist rust and vibration. The thicker inner\/outer walls help the assembly last under heat cycles and rough trail use while dampening unwanted resonance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated full exhaust system for fewer leak points\u003c\/li\u003e\n  \u003cli\u003eDouble-layer stainless-steel inner walls resist corrosion and vibration\u003c\/li\u003e\n  \u003cli\u003eRemovable 28mm pipe guard protects the muffler from impacts\u003c\/li\u003e\n  \u003cli\u003eComes with metal clip, rubber gasket, and additional gaskets for a sealed fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this muffler change my bike’s sound and performance?\u003c\/h3\u003e\n\u003cp\u003eThe FVRITO muffler is tuned to produce a deeper, more resonant exhaust note compared with many stock silencers, emphasizing a fuller roar without being excessively loud. While designed primarily for sound character and durability, correct installation and matching to your engine tune help ensure consistent running.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDeep, resonant tone for a more authoritative exhaust note\u003c\/li\u003e\n  \u003cli\u003eNoise dampening via internal layering for controlled sound output\u003c\/li\u003e\n  \u003cli\u003eIncluded gasket set and clip reduce leaks that sap performance\u003c\/li\u003e\n  \u003cli\u003eRemovable guard keeps the silencer body protected from abrasions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hardware and dimensions are included for installation?\u003c\/h3\u003e\n\u003cp\u003eThe package contains everything needed to mount the exhaust: muffler, head pipe, gasket kit, hardware and a metal clip. Key dimensions include a 28mm head diameter and 45mm center-to-center spacing at the pipe ends; the pipe guard is also sized for a 28mm removable sleeve.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage: muffler, head pipe, metal clip, black rubber gasket, two gaskets, screw kit\u003c\/li\u003e\n  \u003cli\u003eHead diameter: 28 mm; distance between pipe ends: 45 mm\u003c\/li\u003e\n  \u003cli\u003e28mm removable pipe guard for easy maintenance\u003c\/li\u003e\n  \u003cli\u003eDesigned for bolt-on replacement on compatible frames\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FVRITO Exhaust Pipe Muffler Silencer Kit is tailored for riders, mechanics and small-bike enthusiasts who need a robust, ready-to-install exhaust for 70cc–125cc pit and dirt bikes—especially owners of Chinese-made XR50\/CRF50-style bikes, Coolster, SSR, Taotao, Apollo, Roketa and similar models seeking improved durability and a fuller sound without chasing multiple aftermarket parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my CRF50\/XR50 clone?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your clone uses a 28mm head diameter and matches common Chinese pit bike mounts, it should fit. Verify head diameter and mounting points before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include gaskets and screws for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package contains the muffler, head pipe, metal clip, black rubber gasket, two additional gaskets, and a screw kit for mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55169128169815,"sku":"B0B5X8CFHK","price":82.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-view-exhaust-muffler-kit.jpg?v=1790419081"},{"product_id":"fvrito-razor-crazy-cart-caster-wheel-assembly-2-pack-pu-wheels-metal-bearings-fits-xl-dlx","title":"FVRITO Razor Crazy Cart Caster Wheel Assembly 2-Pack — PU Wheels \u0026 Metal Bearings, Fits XL\/DLX","description":"\u003cp\u003e\u003cstrong\u003eFVRITO Complete Caster Wheel Assembly replacement is a 2-pack, original-style front\/rear caster wheel set engineered to restore smooth 360° rotation and drifting performance on Razor Crazy Cart models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Crazy Cart XL or DLX is wobbling, making noise, or resisting turns, worn caster wheels are a common cause. This FVRITO kit includes two full caster wheel assemblies and two replacement PU wheels built to match the original fitment for Razor Crazy Kart part numbers W25143461058 and W25143401048. The assemblies are meant to be a cost-effective way to get both front and rear replacements in one purchase so you can quickly return the cart to safe, predictable handling.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these caster assemblies improve my Crazy Cart's handling?\u003c\/h3\u003e\n\u003cp\u003eReplacing old or damaged casters restores free 360° rotation and reduces drag that affects drifting and turning. The assemblies use metal bearings and PU wheels to lower rolling resistance and deliver steadier, quieter motion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores smooth swivel for sharper drift control and predictable steering.\u003c\/li\u003e\n  \u003cli\u003ePU wheels resist wear and reduce vibration compared with degraded rubber.\u003c\/li\u003e\n  \u003cli\u003eMetal bearings promote longer rolling life and consistent performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these parts compatible with my Razor Crazy Cart model?\u003c\/h3\u003e\n\u003cp\u003eYes — the kit is designed to fit Crazy Cart XL and DLX models and matches the referenced Razor part numbers. Verify compatibility by checking the caster mounting hardware and wheel diameter against your cart’s existing pieces before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Razor Crazy Kart \/ Crazy Cart XL and DLX models.\u003c\/li\u003e\n  \u003cli\u003eMatches Razor part numbers W25143461058 and W25143401048.\u003c\/li\u003e\n  \u003cli\u003eWheel diameter 76 mm and width 30 mm for like-for-like replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features do these replacement casters offer?\u003c\/h3\u003e\n\u003cp\u003eThe wheels are made from polyurethane (PU), chosen for wear resistance, low noise output, and temperature stability. Combined with metal bearings, the assemblies are built to withstand repeated drifting and daily use while keeping maintenance needs low.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePU construction for abrasion resistance and quieter rolling.\u003c\/li\u003e\n  \u003cli\u003eMetal bearings to improve longevity and reduce friction.\u003c\/li\u003e\n  \u003cli\u003eResistant to temperature changes and free of strong factory odors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward with basic hand tools: an Allen wrench to loosen coupling bolts and a 24 mm wrench for caster nuts. The kit comes as complete assemblies, so you remove the old caster and mount the new one, then slide on the replacement wheel if needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWheel diameter: 76 mm (approx. 2.99 in); width: 30 mm (approx. 1.18 in).\u003c\/li\u003e\n  \u003cli\u003eUse an Allen wrench for hub bolts and a 24 mm wrench for caster nuts.\u003c\/li\u003e\n  \u003cli\u003eComplete assemblies reduce installation steps compared with individual parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This 2-pack FVRITO caster wheel assembly set suits owners of Razor Crazy Cart XL or DLX who want an affordable, original-style repair. It’s intended for riders and parents seeking to replace worn caster components quickly, restore reliable drifting and steering, and extend the life of their cart without sourcing multiple single parts. If you value easy installation, durable PU wheels, and matching OEM fitment, this kit provides a practical, cost-effective solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these casters fit my Crazy Cart XL?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the FVRITO assemblies fit Crazy Cart XL and DLX and match listed Razor part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools are needed to install the replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You’ll need an Allen wrench for hub bolts and a 24 mm wrench to remove and install caster nuts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55169180827991,"sku":"B0CGCX4D8S","price":77.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-caster-assembly-packed.jpg?v=1790420226"},{"product_id":"fvrito-60-100-14-dirt-bike-tire-tube-kit-14-knobby-tire-with-inner-tube-valve-kit","title":"FVRITO 60\/100-14 Dirt Bike Tyre \u0026 Tube Kit — 14\" Knobby Tyre with Inner Tube, Valve Kit","description":"\u003cp\u003e\u003cstrong\u003eFVRITO's 60\/100-14 kit is a ready-to-install knobby tire plus inner tube designed to fit 14-inch rims on a wide range of small off-road and electric dirt bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete replacement set includes a heavy-duty 60\/100-14 tire, a matching 2.50-14 inner tube, valve cores and caps, and a valve-core wrench so you can get back on the trail quickly. The size and stem style are made for 14\" rims commonly found on mini motocross bikes, pit bikes and certain electric models such as the Tuttio Soleil01 and Yozma IN10. Built from durable rubber with an aggressive knob pattern, the tire is aimed at riders who need traction, resilience and a straightforward swap-in kit.\u003c\/p\u003e\n\n\u003ch3\u003eWill this 60\/100-14 tire fit my bike?\u003c\/h3\u003e\n\u003cp\u003eIf your rim is 14 inches and your current tire is listed as 60\/100-14 or 2.50-14, this kit is a direct size match. Always confirm rim width and existing tire sizing before purchase to ensure proper clearance and handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 14\" rims and tires labeled 60\/100-14 or 2.50-14.\u003c\/li\u003e\n  \u003cli\u003eValve equipment included for common stem installations.\u003c\/li\u003e\n  \u003cli\u003eWorks with many 50cc–150cc pit and 14\" wheel electric bikes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich bike models are known to work with this kit?\u003c\/h3\u003e\n\u003cp\u003eThis FVRITO tire-and-tube set lists broad compatibility with small-displacement dirt and pit bikes as well as select electric mini bikes. It is especially suited to models that use a 14-inch wheel and require a knobby tread for off-road traction.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits classic mini motocross models like CRF70, XR70, KLX110, TTR110 and similar.\u003c\/li\u003e\n  \u003cli\u003eCompatible with many Chinese-brand pit bikes (SSR, Apollo, TaoTao, Coolster, etc.).\u003c\/li\u003e\n  \u003cli\u003eDesigned to fit electric bikes such as Tuttio Soleil01, Yozma IN10, Heybike and Eskute Nova Mini.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the tire and what’s included in the package?\u003c\/h3\u003e\n\u003cp\u003eThe tire is made from premium heavy-duty rubber that resists cuts and wear from trail use. The kit includes everything needed to install and seal the tube, reducing trips to the shop and letting you finish the repair at home.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne 60\/100-14 knobby tire manufactured from durable rubber compound.\u003c\/li\u003e\n  \u003cli\u003eOne matching 2.50-14 inner tube with valve cores and multiple valve caps.\u003c\/li\u003e\n  \u003cli\u003eValve core wrench included plus spare brass valve cores for quick service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this affect ride and handling off-road?\u003c\/h3\u003e\n\u003cp\u003eThe aggressive knobby pattern improves grip on dirt, gravel and loose surfaces compared with street-oriented tires. Proper inflation and rim compatibility are important to maintain intended handling and to avoid pinch flats on rough terrain.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKnobby tread increases traction on loose or uneven surfaces.\u003c\/li\u003e\n  \u003cli\u003eDurable rubber balances wear resistance with necessary flex for bumps.\u003c\/li\u003e\n  \u003cli\u003eUse recommended pressures for your bike to preserve handling characteristics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FVRITO 60\/100-14 tire and tube kit is aimed at riders of mini motocross, pit bikes and compatible electric dirt bikes who need a reliable, off-road oriented replacement wheel setup. Choose this kit if your bike uses a 14\" rim, you want a complete replacement (tire, tube and installation hardware), and you value a durable knobby tread for trail riding, training or light recreational off-roading.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 60\/100-14 kit tubeless-ready?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, this kit includes a standard inner tube and is not intended for tubeless setups.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this tire fit electric mini bikes like Tuttio Soleil01?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it's listed compatible with Tuttio Soleil01, Yozma IN10 and similar 14\" electric mini bikes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55170137489751,"sku":"B093ZK5PGF","price":88.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-60-100-14-front-profile-tire.jpg?v=1790423861"},{"product_id":"fvrito-80-100-12-knobby-rear-tire-inner-tube-kit-12-off-road-pit-bike-traction-tread","title":"FVRITO 80\/100-12 Knobby Rear Tyre \u0026 Inner Tube Kit — 12\" Off-Road\/Pit Bike, Traction Tread","description":"\u003cp\u003e\u003cstrong\u003eFVRITO's 80\/100-12 knobby rear tire and inner tube kit is a ready-to-install 12\" replacement designed to restore traction and reliability for small-displacement off-road and pit motorcycles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete kit pairs an 80\/100-12 knobby tire with a compatible inner tube and a small hardware set so you can swap wheels quickly and get back on the trail. The tread pattern targets loose dirt and mixed terrain common to motocross, pit, and youth bikes, while the included valve parts and wrench let you finish the job without searching for extra tools. Double-check rim width and tire diameter against your bike’s specifications before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat bikes will this 80\/100-12 tire and tube fit?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit is intended for 12\" rims on a wide range of small-displacement off-road motorcycles and many Chinese-brand pit bikes. Compatibility includes factory and aftermarket models commonly used for recreational riding, practice, or replacement parts.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits 12\" rims specifying 80\/100-12 or 3.00-12 sizing.\u003c\/li\u003e\n  \u003cli\u003eCompatible with many 90cc, 110cc, 125cc motorcycles and pit bikes (examples: SSR, Apollo, Kayo, Thumpstar).\u003c\/li\u003e\n  \u003cli\u003eKnown fitment with model lines such as CRF70, XR70, KLX110, KX60\/KX65, DR-Z110, JR80 and similar.\u003c\/li\u003e\n  \u003cli\u003eAlso used on select small electric mini bikes and recreational 48V\/2000–2600W motors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the tread design perform on dirt and mixed terrain?\u003c\/h3\u003e\n\n\u003cp\u003eThe knobby tread is engineered to grip loose soil and provide predictable handling in ruts and berms. It balances bite and self-cleaning to reduce mud buildup while delivering controlled cornering for riders learning technique or those tackling trails and tracks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDeep, spaced knobs for traction on loose dirt and gravel.\u003c\/li\u003e\n  \u003cli\u003eShoulder lugs shaped for consistent corner hold.\u003c\/li\u003e\n  \u003cli\u003eTread spacing helps shed mud and debris for sustained grip.\u003c\/li\u003e\n  \u003cli\u003eModerate block stiffness for responsive feel without harshness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and what tools come with the kit?\u003c\/h3\u003e\n\n\u003cp\u003eThe package is sold as a wheel-ready set: tire, inner tube and valve hardware arrive together so you don’t need to source small parts separately. A valve-core wrench and multiple stem valve caps are included for convenience during installation and maintenance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 × 80\/100-12 knobby rear tire sized for 12\" rims.\u003c\/li\u003e\n  \u003cli\u003e1 × compatible inner tube for the 80\/100-12 tire.\u003c\/li\u003e\n  \u003cli\u003eValve accessories: red and black stem caps, two spare brass valve cores, and a valve core wrench.\u003c\/li\u003e\n  \u003cli\u003eKit supports a ready mount-and-inflate replacement workflow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the rubber and what maintenance should I plan for?\u003c\/h3\u003e\n\n\u003cp\u003eThe tire and tube are made from heavy-duty rubber formulations intended for repeated off-road use; proper mounting, correct inflation and routine inspection extend service life. Avoid prolonged exposure to harsh chemicals and store the tire away from direct sunlight when not installed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePremium rubber compound for abrasion resistance and longevity.\u003c\/li\u003e\n  \u003cli\u003eInspect for cuts, punctures and sidewall damage after every ride.\u003c\/li\u003e\n  \u003cli\u003eMaintain recommended tire pressure for load and terrain to reduce wear.\u003c\/li\u003e\n  \u003cli\u003eReplace inner tube if repeated punctures occur; spare valve cores included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders, mechanics and hobbyists who need a straightforward, cost-effective replacement for worn 12\" rear tires on small dirt bikes and pit bikes. This kit suits parents maintaining youth bikes, track-day enthusiasts refreshing tires before events, and shop technicians stocking common fitments for 90–125cc motocross and pit motorcycle models. Confirm rim size and tire code before purchase to ensure fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my bike if the rim is 12 inches?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this 80\/100-12 tire and tube are designed for 12\" rims; confirm your rim width and OEM size tag before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are valve cores and caps included with the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the package includes valve core wrench, two brass cores, and multiple stem valve caps for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55170337931607,"sku":"B08XH382TP","price":86.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvlrito-front-tire-packaging.jpg?v=1790428158"},{"product_id":"fvrito-rear-wheel-assembly-for-razor-mx500-mx650-sx500-2-50-10-tire-140mm-disc-sprocket","title":"FVRITO Rear Wheel Assembly for Razor MX500 MX650 SX500 — 2.50-10 Tyre, 140mm Disc \u0026 Sprocket","description":"\u003cp\u003e\u003cstrong\u003eFVRITO’s MX650 rear wheel assembly is a complete, ready-to-install replacement rear wheel for Razor MX500, MX650 and SX500 mini dirt rocket bikes, featuring a 2.50-10 tire\/tube, 140mm disc rotor and integrated sprocket and axle.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a worn or damaged rear wheel leaves your mini dirt bike sidelined, swapping the whole assembly is faster and more reliable than patching tires or rebuilding parts. This FVRITO unit arrives pre-mounted with a knobby off-road tire, tube, rim, chain sprocket and brake rotor so you can restore rideability in a single replacement. The assembly is designed to match the original OEM fitment and supports typical off-road loads for these Razor models.\u003c\/p\u003e\n\n\u003ch3\u003eWill this rear wheel fit my Razor MX500, MX650 or SX500?\u003c\/h3\u003e\n\u003cp\u003eYes — the assembly matches the factory specifications used on MX500, MX650 and SX500 mini dirt rocket bikes. It uses a 2.50-10 tire\/tube size and the standard axle dimensions for these models, so it installs without frame modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTire\/tube size: 2.50-10 with TR87 angled valve stem\u003c\/li\u003e\n  \u003cli\u003eDisc rotor: 140 mm diameter\u003c\/li\u003e\n  \u003cli\u003eDesigned as OEM-style replacement for rear use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the FVRITO rear wheel for off-road riding?\u003c\/h3\u003e\n\u003cp\u003eThe wheel is built from materials chosen for abrasion resistance and shock absorption, helping it stand up to rough terrain and repeated use. The knobby tread increases traction in loose surfaces, while the integrated rim and sprocket reduce potential points of failure compared with piecemeal repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKnobby pattern for higher ground contact and anti-slip performance\u003c\/li\u003e\n  \u003cli\u003eReinforced rim and tube for improved wear resistance\u003c\/li\u003e\n  \u003cli\u003eIntegrated sprocket and rotor minimize alignment issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to replace my old wheel with this assembly?\u003c\/h3\u003e\n\u003cp\u003eReplacing the entire rear wheel assembly is straightforward and saves time versus changing a tire, tube, sprocket, and rotor separately. Remove the old assembly and drop in the new FVRITO unit; axle, valve cap and hardware are included to simplify installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes with axle and red valve stem cap for one-step swap\u003c\/li\u003e\n  \u003cli\u003eNo need to bead tires or press bearings during installation\u003c\/li\u003e\n  \u003cli\u003eFactory-style fitment reduces the need for adjustments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat load and pressure specs should I follow?\u003c\/h3\u003e\n\u003cp\u003eObserve the assembly’s rated limits and inflation range to keep handling predictable and components long-lived. The wheel supports typical rider weights for mini dirt bikes and should be inflated to the recommended pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum load: 275 lbs (125 kg)\u003c\/li\u003e\n  \u003cli\u003eRecommended max tire pressure: 36 PSI\u003c\/li\u003e\n  \u003cli\u003eValve type: TR87 angled stem for easy access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FVRITO MX650 rear wheel assembly is aimed at owners of Razor MX500, MX650 and SX500 mini dirt rocket bikes who want a quick, OEM-style rear wheel replacement. It suits riders who prefer restoring functionality fast—mechanics, parents repairing kids’ bikes, or enthusiasts maintaining a spare on hand. Choose this complete assembly if you want a direct-fit, durable wheel with integrated rotor and sprocket instead of sourcing multiple separate parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this wheel as a front wheel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This assembly is designed specifically for rear use and should not be swapped to the front.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include the axle and valve cap?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes one axle, one MX650 rear wheel assembly and a red valve stem cap.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55170686222679,"sku":"B0CGD8K6P8","price":147.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-rear-wheel-front-view.jpg?v=1790432919"},{"product_id":"fvrito-tire-tube-combo-60-100-14-front-80-100-12-rear-complete-kit-for-70-125cc-pit-and-mini-dirt-bikes-tr4-valves","title":"FVRITO Tyre \u0026 Tube Combo 60\/100-14 Front + 80\/100-12 Rear — Complete Kit for 70–125cc Pit and Mini Dirt Bikes, TR4 Valves","description":"\u003cp\u003e\u003cstrong\u003eFVRITO's combo packs a front 60\/100-14 (2.50-14) and a rear 80\/100-12 (3.00-12) tire with matching inner tubes and hardware for 70–125cc off-road and pit bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis set is a complete replacement package built for small off-road motorcycles, minibikes and electric pit bikes. It includes both tires, two inner tubes with TR4 straight valve stems, valve cores, caps and a core wrench so you can mount and ride with fewer trips to the shop. The sizes fit common 14\" front and 12\" rear rims and are designed to suit a wide range of 70cc–140cc class machines from Japanese models to popular Chinese pit-bikes.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these sizes match my bike?\u003c\/h3\u003e\n\u003cp\u003eThe front tire is labeled 60\/100-14 (2.50-14) and fits standard 14-inch rims; the rear is 80\/100-12 (3.00-12) for 12-inch rims. Verify your rim diameters and existing tire markings before ordering to ensure compatibility. These dimensions are common on many junior and pit motorcycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFront: 60\/100-14 — fits 14\" rims (2.50-14 nominal width).\u003c\/li\u003e\n  \u003cli\u003eRear: 80\/100-12 — fits 12\" rims (3.00-12 nominal width).\u003c\/li\u003e\n  \u003cli\u003eValve stem type: TR4 straight valve for easy pumping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich bike models and brands will they fit?\u003c\/h3\u003e\n\u003cp\u003eThis combo is made to cover a broad list of small-displacement dirt and pit bikes, including both gasoline and some electric mini-bikes. It’s compatible with many well-known models and a variety of Chinese-brand pit bikes, making it useful for owners of mixed fleets or replacement needs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits: CRF70, XR70, KLX110, KX60\/65, TTR90, PW80 and similar models.\u003c\/li\u003e\n  \u003cli\u003ePit-bike brands: TaoTao, SSR, Apollo, Coolster, Kayo, Piranha and others.\u003c\/li\u003e\n  \u003cli\u003eElectric mini-bikes noted: Yozma IN10, Tuttio Soleil01 and similar 48V small ebikes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features are included?\u003c\/h3\u003e\n\u003cp\u003eThese tires and tubes are constructed from heavy-duty rubber compounds designed for off-road use. The inner tubes come with brass valve cores and reinforced stems to withstand typical trail and pit use, while the tires offer tread suitable for dirt and mixed off-road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium rubber construction for abrasion resistance and longevity.\u003c\/li\u003e\n  \u003cli\u003eBrass valve cores and included valve caps for secure inflation retention.\u003c\/li\u003e\n  \u003cli\u003eComes with a valve core wrench for easy maintenance and repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat exactly comes in the package?\u003c\/h3\u003e\n\u003cp\u003eThe kit is comprehensive so you can replace both tires and tubes without searching for extras. Everything is intended to get you back on the trail quickly after installation, with spare small parts included for convenience.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 tires (front 60\/100-14 and rear 80\/100-12) and 2 inner tubes.\u003c\/li\u003e\n  \u003cli\u003e2 red valve caps, 2 black valve caps, 2 brass valve stem cores.\u003c\/li\u003e\n  \u003cli\u003e1 valve core wrench included for installation and servicing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This FVRITO combo suits riders, mechanics and fleet managers who need a ready-to-install front-and-rear tire set for 70–125cc dirt bikes, pit bikes, minibikes and compatible electric mini off-road models. It’s ideal if you want a reliable replacement package with matching tubes and tools, rather than sourcing tires and inner tubes separately. Always confirm rim diameter and tire markings before ordering to ensure proper fitment for your specific machine.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these tires fit a 14\" front and 12\" rear rim?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The front is 60\/100-14 for 14\" rims and the rear is 80\/100-12 for 12\" rims; check your tire sidewall to confirm sizes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are valve cores and caps included in the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes brass valve cores, red and black valve caps, and a valve core wrench.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55171156836695,"sku":"B093ZQFNPD","price":136.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-tire-packaging.jpg?v=1790439566"},{"product_id":"fvrito-4-10-6-tire-inner-tube-kit-for-6-rims-set-of-2-with-bent-valve-stems-and-accessories","title":"FVRITO 4.10-6 Tyre \u0026 Inner Tube Kit for 6\" Rims — Set of 2 with Bent Valve Stems and Accessories","description":"\u003cp\u003e\u003cstrong\u003eFVRITO 4.10-6 is a two-piece tire and inner tube kit designed for 6\" rims, supplied with bent valve stems and accessories so you can quickly replace worn wheels on small utility and recreational equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit includes two 4.10-6 (also labeled 4.10\/3.50-6) tires paired with matching inner tubes and a full accessory pack—valve stem cores, caps, and a valve core wrench—so you get everything needed to service compact machinery. The components are molded from heavy-duty rubber intended for frequent use around the yard or on light off-road vehicles. Confirm rim diameter and tire markings before ordering to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWill these tires and tubes fit my 6-inch rim and mini equipment?\u003c\/h3\u003e\n\u003cp\u003eYes—these parts are sized for 6\" rims and commonly listed as 4.10-6 or 4.10\/3.50-6. Measure the rim and compare the stamped size on your current tire to avoid mismatches. If your rim is a non-standard size or has an uncommon bead profile, consult a technician before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 6\" rims with 4.10-6 \/ 4.10\/3.50-6 tire designation\u003c\/li\u003e\n  \u003cli\u003eSuitable for mini bikes, go-karts, Chinese ATVs, and garden machines\u003c\/li\u003e\n  \u003cli\u003eVerify existing tire sidewall markings and rim width prior to purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these tires and inner tubes during regular yard or utility use?\u003c\/h3\u003e\n\u003cp\u003eThe tires and tubes are manufactured from robust rubber compounds made to withstand routine loads and occasional rough surfaces. They are not intended for extreme high-speed use but perform well on lawn tractors, wheelbarrows, and utility carts. Proper inflation and avoiding sharp debris will prolong service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty rubber construction designed for frequent use\u003c\/li\u003e\n  \u003cli\u003eBest for low- to moderate-speed utility and recreational tasks\u003c\/li\u003e\n  \u003cli\u003eReplace when tread or tube shows cuts, bulges, or repeated punctures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe set arrives with two tires, two inner tubes, two red and two black valve caps, two brass valve cores, and a valve core wrench—everything to complete a straightforward swap. A bent valve stem design helps when wheel housings have limited clearance. Installation requires basic hand tools and some tire-lever skill; a second person makes mounting easier.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: 2 tires, 2 inner tubes, 4 valve caps, 2 valve cores, valve core wrench\u003c\/li\u003e\n  \u003cli\u003eBent valve stems for tight wheel wells and easier access\u003c\/li\u003e\n  \u003cli\u003eSimple tire mounting—tube install, seat bead, inflate to recommended pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich machines and tasks are these tires best suited for?\u003c\/h3\u003e\n\u003cp\u003eThese tires and tubes are targeted at compact equipment that uses 6\" rims, including garden and utility gear. They work well for equipment moved over grass, soil, gravel, and paved driveways where high speeds and heavy loads are uncommon. Avoid use on high-power ATVs or commercial vehicles not matching the tire rating.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for wheelbarrows, garden carts, hand trucks, and trolleys\u003c\/li\u003e\n  \u003cli\u003eCompatible with mini bikes, go-karts, Chinese ATVs, and 4-wheelers\u003c\/li\u003e\n  \u003cli\u003eAlso fits snow blowers, pressure washers, and small generators with 6\" wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This FVRITO 4.10-6 two-pack is ideal for homeowners, landscapers, and hobbyists who need a reliable replacement for small-wheel applications. Buy this set if you want a complete, ready-to-install kit with bent valve stems and spare hardware for easy maintenance of garden equipment, utility carts, and light recreational vehicles. Confirm wheel markings and rim size to ensure a proper fit before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these tires fit 6-inch rims?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are sized 4.10-6 (4.10\/3.50-6) and designed for 6\" rims—confirm your rim and sidewall markings before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are valve stems included and easy to access?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Bent valve stems are included with caps and cores for easier access in confined wheel wells.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55171361177943,"sku":"B08RYFBG79","price":86.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-facing-tire-pair.jpg?v=1790443878"},{"product_id":"fvrito-90-100-14-3-00-14-knobby-tire-and-inner-tube-kit-14in-rear-off-road-tire-aggressive-tread","title":"FVRITO 90\/100-14 (3.00-14) Knobby Tyre and Inner Tube Kit - 14in Rear Off-Road Tyre, Aggressive Tread","description":"\u003cp\u003e\u003cstrong\u003eFVRITO's 90\/100-14 knobby tire with matching inner tube is a durable, all-purpose rear wheel replacement designed for 14-inch off-road motorcycles, pit bikes and compatible ebikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement kit pairs a 3.00-14 (90\/100-14) aggressive-tread tire with a heavy-duty inner tube and a small hardware pack so you can swap a worn rear wheel setup quickly. Built from sturdy rubber compounds, the assembly is intended for motocross, trail and pit-bike duties on 14\" rims and is promoted as a direct-fit option for many 125cc–160cc dirt bikes as well as certain high-performance electric dirt bikes with 14\" rear wheels.\u003c\/p\u003e\n\n\u003ch3\u003eWhich bikes and ebikes is this 90\/100-14 set compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis kit lists broad compatibility across popular small-displacement motocross and pit-bike models and select electric dirt bikes. Check your wheel diameter and tire size markings to confirm fit before buying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 14\" rims marked 90\/100-14, 90-100-14, 3.00-14 or 3.00x14.\u003c\/li\u003e\n  \u003cli\u003eCommon compatible petrol bikes: CR80R, CR85R, CRF80F, CRF125F, CRF150R, XR80R, YZ80, YZ85, TTR125, KLX125, KX85, RM85 and similar.\u003c\/li\u003e\n  \u003cli\u003eWorks with many Chinese brand pit bikes: SSR, YCF, Apollo, Kayo, Pitster Pro, Thumpstar, Coolster and others.\u003c\/li\u003e\n  \u003cli\u003eAlso suitable as a rear tire on specific 14\" ebikes like certain high-power Yozma and VALTINSU models — verify your manufacturer’s size spec.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the tire tread and construction perform on dirt and mixed terrain?\u003c\/h3\u003e\n\u003cp\u003eThe knobby tread pattern is engineered for traction on loose, soft and uneven surfaces, shedding mud while digging into loamy soil and gravel. The rubber compound and block spacing balance grip with reasonably long wear for recreational and pit use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAggressive knobbies for traction in sand, dirt and light mud.\u003c\/li\u003e\n  \u003cli\u003eWide block spacing reduces clogging and helps self-cleaning.\u003c\/li\u003e\n  \u003cli\u003eRobust sidewalls improve puncture resistance during off-road use.\u003c\/li\u003e\n  \u003cli\u003eDesigned for normal trail speeds and pit-bike competition conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included in the package and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with one tire and one inner tube plus a small accessory pack to assist a home install or a quick roadside repair. Basic tire-mounting tools or a shop visit may be required if you’re not experienced changing tubed tires.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 tire, 1 inner tube, three valve caps (one red, two black), valve core wrench and two brass valve cores.\u003c\/li\u003e\n  \u003cli\u003eValve hardware and wrench let you service or replace cores without extra parts.\u003c\/li\u003e\n  \u003cli\u003eTube is pre-sized for a snug fit on 14\" rims; use proper tire levers and lubing method for safe mounting.\u003c\/li\u003e\n  \u003cli\u003eRecommended to balance and check bead seating and air pressure after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this a durable option for regular riding and heavier use?\u003c\/h3\u003e\n\u003cp\u003eMaterials are described as premium, heavy-duty rubber intended for repeated off-road use, though longevity will depend on riding conditions and maintenance. For daily hard-ride or race use, inspect for wear regularly and carry a spare tube and repair kit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThicker rubber and reinforced construction for improved abrasion resistance.\u003c\/li\u003e\n  \u003cli\u003eInner tube made to withstand typical trail punctures and pressures for tubed setups.\u003c\/li\u003e\n  \u003cli\u003eSuitable for home, workshop or professional replacement needs.\u003c\/li\u003e\n  \u003cli\u003ePerformance varies with terrain, load and proper inflation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: riders of 14\" wheel pit bikes, small-displacement motocross bikes and owners of compatible high-performance 14\" electric dirt bikes who need a reliable, ready-to-install rear tire and tube combo. It’s aimed at weekend trail riders, pit-bike racers, DIY mechanics and service shops looking for an economical replacement that balances traction and durability. Always verify tire size on your rim and confirm model compatibility before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this 90\/100-14 tire fit my 14\" rim?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your rim is rated for 90\/100-14 or 3.00-14 tires; always confirm the rim and existing tire size markings before installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the inner tube compatible with tubeless rims?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This kit includes a tube designed for tubed wheels; tubeless rims require a tubeless-specific tire and sealing setup.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55171438084439,"sku":"B0933CQ1RF","price":99.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-tire-packaging_3e3d204e-ad04-4fed-ac61-9cae371c60da.jpg?v=1790445292"},{"product_id":"fvrito-145-70-6-knobby-mini-bike-go-kart-tires-with-inner-tubes-4-ply-straight-valve-kit","title":"FVRITO 145\/70-6 Knobby Mini Bike \u0026 Go-Kart Tyres with Inner Tubes — 4-Ply, Straight Valve Kit","description":"\u003cp\u003e\u003cstrong\u003eFVRITO 145\/70-6 knobby tires with inner tubes and straight valves are a ready-to-install wheel kit designed for 6-inch rims on mini bikes, go-karts, ATVs, UTVs and utility lawn equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese tires come as a matched pair with inner tubes, valve cores and caps plus a valve-core wrench so you have everything needed to replace worn tires or convert tubeless setups. Built in a 145\/70-6 size and 4-ply construction, this kit fits many 6-inch wheel applications commonly found on 196cc–212cc minibikes, go-karts, quads and small utility vehicles. The knobby tread pattern improves traction on mixed terrain while the packaged inner tubes give you the option to run tubeless or tube-equipped depending on your wheel and preference.\u003c\/p\u003e\n\n\u003ch3\u003eWill these tires fit my minibike or go-kart?\u003c\/h3\u003e\n\u003cp\u003eConfirm the 145\/70-6 stamp matches your current tire or rim size; the listed wheel (rim) diameter is 6 inches. Check your vehicle’s payload and axle configuration—these are 4-ply tires aimed at light recreational and utility use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSize: 145\/70-6 — matches 6-inch rims\u003c\/li\u003e\n  \u003cli\u003eConstruction: 4-ply for light-duty load capacity\u003c\/li\u003e\n  \u003cli\u003eCommon fitments: 196cc–212cc minibikes, DB30, Motovox MBX10, Doodle Bug, Baja-style go-karts\u003c\/li\u003e\n  \u003cli\u003eAlways measure existing tire and rim before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install these tires and valves?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes two inner tubes, brass valve stem cores, valve caps and a valve-core wrench so you can mount and seal the tire whether you choose tubeless or tube setup. Use standard tire mounting tools and follow safe inflation recommendations for your vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded parts: 2 tires, 2 inner tubes, 4 valve caps (2 red, 2 black)\u003c\/li\u003e\n  \u003cli\u003eTools in kit: valve-core wrench for easy valve service\u003c\/li\u003e\n  \u003cli\u003eInstallation: mount on 6\" rim; add tube if you prefer tube configuration\u003c\/li\u003e\n  \u003cli\u003eTip: inspect rim bead and use proper lubrication and torque when seating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat terrain and conditions are these knobby tires best suited for?\u003c\/h3\u003e\n\u003cp\u003eThe pronounced knobby tread gives improved grip on loose or uneven surfaces like dirt, gravel and grass, making them a practical choice for off-road play, lawn utility tasks and trail riding. They also perform adequately on packed surfaces but are not optimized for high-speed pavement running.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBest: dirt trails, grass, gravel, yard work\u003c\/li\u003e\n  \u003cli\u003eAcceptable: compacted surfaces for low-speed use\u003c\/li\u003e\n  \u003cli\u003eNot ideal: high-speed street use or long highway runs\u003c\/li\u003e\n  \u003cli\u003eUse caution: tire wear increases on paved surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the package include and why is that useful?\u003c\/h3\u003e\n\u003cp\u003eThis set is supplied with everything needed for a straightforward replacement: two tires and two inner tubes plus valve accessories so you can choose tube or tubeless operation and have spare parts on hand. The extra valve cores and caps simplify routine maintenance and reduce downtime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded items: 2 tires, 2 inner tubes, 2 red valve caps, 2 black valve caps\u003c\/li\u003e\n  \u003cli\u003eAdditional accessories: 2 brass valve stem cores, 1 valve-core wrench\u003c\/li\u003e\n  \u003cli\u003eBenefit: ready-to-install kit reduces trips to the shop\u003c\/li\u003e\n  \u003cli\u003eOption: run tubeless or use the supplied tubes for added comfort\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FVRITO 145\/70-6 tire and tube kit suits owners of small recreational vehicles (mini bikes, youth go-karts, entry-level ATVs\/UTVs), lawn and garden machines, and hobbyists who need a budget-friendly, ready-to-fit replacement. Choose this set if you want a durable knobby tread for mixed off-road use, prefer a 6-inch rim package with spare tube and valve parts included, and need a simple, serviceable solution for light-duty applications. Always verify wheel diameter and axle compatibility before ordering to ensure a correct fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these tires tubeless or do they include tubes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The tires are tubeless-style but the kit includes two inner tubes so you can run tubes if preferred.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit a 6-inch rim on my minibike?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these are 145\/70-6 tires designed for 6-inch rims; confirm your current tire size before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FVRITO","offers":[{"title":"Default Title","offer_id":55171464495447,"sku":"B08RXY17G3","price":98.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fvrito-front-packaging-145-70-6-tire-pair.jpg?v=1790446425"}],"url":"https:\/\/britishgarage.co.uk\/collections\/fvrito.oembed?page=3","provider":"British Garage","version":"1.0","type":"link"}