{"title":"GAsupply","description":"\u003cp\u003eBrowse 22 GAsupply products at British Garage, including motorcycle \u0026amp; atv parts. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked UK delivery on every order and 30-day returns.\u003c\/p\u003e","products":[{"product_id":"gasupply-m12x1-25-chrome-short-open-lug-nuts-20-pc-0-8-tall-3-4-hex-cone-seat","title":"GAsupply M12x1.25 Chrome Short Open Lug Nuts 20 Pc — 0.8\" Tall, 3\/4\" Hex Cone Seat","description":"\u003cstrong\u003eGAsupply M12x1.25 Short Open Lug Nuts are a 20-piece set of chrome, 60° conical-seat, 3\/4\" hex acorn-style nuts designed for wheels using 12x1.25mm studs.\u003c\/strong\u003e\n\n\u003cp\u003eIf you need compact, durable lug nuts that improve wheel appearance and match cone-seat studs, this GAsupply pack offers a ready-to-install option. These short open-end acorn lug nuts measure 0.8\" (21mm) tall, feature a 3\/4\" (19mm) hex for common sockets, and are finished in chrome for corrosion resistance and a polished look. The set contains 20 pieces, packaged for storage and easy transport.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my vehicle with 12x1.25 studs?\u003c\/h3\u003e\n\u003cp\u003eThese nuts are engineered specifically for studs with a 12mm diameter and 1.25mm thread pitch, and they seat against a 60° conical surface. They will not fit alternate thread pitches or seat types, so verifying your vehicle's stud measurements and seat angle is essential before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread size: 12-1.25mm — confirm your car’s studs match\u003c\/li\u003e\n  \u003cli\u003eSeat type: 60° conical cone seat — designed for matching conical lug holes\u003c\/li\u003e\n  \u003cli\u003eHeight: 0.8\" (21mm) — short\/open-end profile for low-clearance wheels\u003c\/li\u003e\n  \u003cli\u003eHex: 3\/4\" (19mm) — works with common sockets and impact tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant are these chrome lug nuts?\u003c\/h3\u003e\n\u003cp\u003eGAsupply manufactures these lug nuts from cold-headed steel in a single-piece design to improve strength and integrity. They undergo nearly 96 hours of salt spray testing and receive an anti-rust oil treatment and chrome finish to slow corrosion and maintain appearance under typical road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: high-quality cold-headed steel one-piece construction\u003c\/li\u003e\n  \u003cli\u003eFinish: chrome plating with anti-rust oil for added corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eTesting: approximately 96 hours salt spray resistance for durability\u003c\/li\u003e\n  \u003cli\u003eThread condition: clean, clear threads for easier installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat wheel clearance and tool access should I expect with the short open design?\u003c\/h3\u003e\n\u003cp\u003eThe 0.8\" tall short\/open-ended acorn design is made for wheels and aftermarket rims with limited lug nut recess depth. Because the end is open, you can fit nuts over longer studs and use standard 3\/4\" sockets without interference from a closed cap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShort profile minimizes interference with low-clearance wheel designs\u003c\/li\u003e\n  \u003cli\u003eOpen end allows room for longer studs and easy installation\u003c\/li\u003e\n  \u003cli\u003e3\/4\" hex size accepted by most lug socket sets and impact tools\u003c\/li\u003e\n  \u003cli\u003eAcorn shape offers a neat, finished look while protecting threads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how do I get support if needed?\u003c\/h3\u003e\n\u003cp\u003eThe package contains 20 chrome acorn-style lug nuts in GAsupply’s premium packaging, suitable for storage and transport. If compatibility or quality questions arise, GAsupply offers customer support to assist with fitment checks or to address product concerns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 20× short open acorn lug nuts, chrome finish\u003c\/li\u003e\n  \u003cli\u003ePackaging: compact, premium storage-ready box for easy organization\u003c\/li\u003e\n  \u003cli\u003eSupport: customer service available for fitment and quality help\u003c\/li\u003e\n  \u003cli\u003eUse advice: verify stud thread and seat type before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These lug nuts are aimed at drivers, mechanics, and wheel enthusiasts who need a compact, chrome-finished nut with a 60° conical seat for vehicles using 12x1.25mm studs. They suit aftermarket wheels or factory rims with shallow lug wells, anyone replacing a full set of nuts, or those wanting a corrosion-tested, easy-to-install option for everyday driving. Always check your vehicle’s thread pitch and seat type before ordering to ensure correct fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit wheels with 12x1.25 studs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they are made for 12mm diameter with 1.25mm pitch and a 60° conical seat. Confirm your studs and seat angle first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use a 3\/4\" socket or impact wrench on these nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the hex is 3\/4\" (19mm), compatible with most lug sockets and impact tools designed for that size.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55163927494999,"sku":"B08XQCLRBN","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-front-view-packaging.jpg?v=1790348287"},{"product_id":"gasupply-chrome-20pc-lug-nuts-1-2-20-1-38in-tall-3-4in-19mm-hex-60-cone-seat-solid-steel","title":"GAsupply Chrome 20pc Lug Nuts 1\/2-20, 1.38in Tall, 3\/4in (19mm) Hex, 60° Cone Seat, Solid Steel","description":"\u003cp\u003e\u003cstrong\u003eGAsupply 20-piece chrome acorn lug nut set: 1\/2-20 thread, 1.38\" tall, 3\/4\" (19mm) hex with a 60° conical seat for vehicles using 1\/2\" wheel studs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts are a compact, high-strength replacement designed for wheels that require a conical (cone) seat and 1\/2\" x 20 threads. Finished in multi-layer chrome plating and constructed from solid steel, the set of 20 provides both corrosion resistance and a polished look to refresh wheel appearance while maintaining secure wheel fastening.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my wheel studs and seat type?\u003c\/h3\u003e\n\u003cp\u003eCheck three measurements: thread pitch, seat style, and stud diameter. These nuts are manufactured to 1\/2-20 UNF thread specifications and intended for 60° conical (cone) seat wheels with 1\/2\" studs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: 1\/2-20 (also listed as 1\/2x20).\u003c\/li\u003e\n  \u003cli\u003eSeat: 60° conical cone seat—match to wheel lug hole profile.\u003c\/li\u003e\n  \u003cli\u003eStud diameter: for 1\/2\" wheel studs only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant are these lug nuts?\u003c\/h3\u003e\n\u003cp\u003eGAsupply uses a one-piece solid steel construction with four-layer chrome electroplating and an anti-rust oil for increased longevity. They are tested against salt spray to reduce the risk of rust and finish fading under typical road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid one-piece steel body for strength under torque.\u003c\/li\u003e\n  \u003cli\u003eFour-layer chrome plating plus anti-rust oil for enhanced corrosion defense.\u003c\/li\u003e\n  \u003cli\u003eSalt spray testing to verify resistance to environmental exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical dimensions and installation details?\u003c\/h3\u003e\n\u003cp\u003eEach acorn-style lug nut measures approximately 1.38 inches (35mm) in overall height and accepts a 3\/4\" (19mm) hex socket for installation. The tapered conical seat centers the wheel on the hub when torque is applied, similar to factory cone-seat lug nuts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeight: 1.38\" (35mm) bulge\/acorn profile.\u003c\/li\u003e\n  \u003cli\u003eDrive: 3\/4\" (19mm) hex—use a matching socket or torque wrench adapter.\u003c\/li\u003e\n  \u003cli\u003eQuantity: set of 20, packaged for easy storage and transport.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these change the look and maintenance of my wheels?\u003c\/h3\u003e\n\u003cp\u003eThe polished chrome acorn shape offers a clean, classic tuner-style appearance that covers exposed stud threads and gives a finished look. Routine cleaning and occasional inspection are all that’s needed to maintain fit and shine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAppearance: chrome acorn design hides studs and complements many wheel styles.\u003c\/li\u003e\n  \u003cli\u003eMaintenance: wipe clean and check torque periodically; reapply anti-seize if removing frequently.\u003c\/li\u003e\n  \u003cli\u003ePackaging: arrives in compact premium packaging for storage or spares.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These lug nuts suit vehicle owners and mechanics who need a reliable, conical-seat replacement in 1\/2-20 thread size—especially owners of tuner-style wheels or anyone wanting a chrome acorn look while maintaining safe wheel seating. Confirm your wheel’s seat angle and stud size before purchase to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts compatible with aftermarket wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They work with wheels that use a 60° conical seat and 1\/2-20 studs. Verify your wheel’s seat angle and stud diameter before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket size do I need to install these lug nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 3\/4\" (19mm) hex socket or wrench; torque per your vehicle manufacturer’s specifications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55164049523031,"sku":"B08XQDK3YT","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-front-packaging-chrome-lug-nuts.jpg?v=1790349384"},{"product_id":"gasupply-1-2-20-lug-nuts-20pc-chrome-1-38in-tall-19mm-hex-60-cone-seat-corrosion-resistant","title":"GAsupply 1\/2-20 Lug Nuts 20pc Chrome 1.38in Tall — 19mm Hex, 60° Cone Seat, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eGAsupply 1\/2x20 lug nuts are a 20-piece set of chrome-plated, 1.38\" tall acorn-style nuts with a 3\/4\" (19mm) hex and 60° conical seat for vehicles using 1\/2-20 wheel studs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts are built for drivers who need reliable, corrosion-resistant fasteners that fit classic and contemporary trucks, SUVs, and Jeeps with 1\/2-20 studs and cone-style wheel seats. Finished in chrome, each nut is cold-headed from steel and treated to resist rust and discoloration, then packaged as a convenient 20-piece kit so you can replace every lug on a single axle or keep spares on hand.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my Dodge, Ford, or Jeep?\u003c\/h3\u003e\n\u003cp\u003eThey fit models that use a 1\/2-20 threaded stud and a 60° conical (cone) seat. Fitment includes many Dodge, Ford, RAM, and Jeep models, but compatibility depends on your wheel seat type and stud thread size rather than vehicle make alone.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread size: 1\/2-20 (verify your studs match).\u003c\/li\u003e\n  \u003cli\u003eSeat type: 60° conical cone seat only.\u003c\/li\u003e\n  \u003cli\u003eCommon compatible vehicles: Dodge Dakota, Durango, Nitro; RAM 1500; Ford F-150, Mustang; Jeep Comanche, Commander, Grand Cherokee, Liberty, TJ, Wrangler.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and rust-resistant are these chrome lug nuts?\u003c\/h3\u003e\n\u003cp\u003eGAsupply lug nuts are cold-headed from steel and receive an anti-rust oil coating plus a chrome finish for improved longevity. The manufacturing process includes extended salt-spray testing to reduce the chance of corrosion and surface degradation in road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction: high-strength cold-headed steel for consistent threads and strength.\u003c\/li\u003e\n  \u003cli\u003eProtective finish: chrome plating with anti-rust oil coating for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eQuality check: extended salt spray testing to evaluate rust performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact specifications and size details?\u003c\/h3\u003e\n\u003cp\u003eEach nut measures 1.38 inches (35 mm) tall and uses a 19 mm (3\/4 inch) hex for installation. The set contains 20 acorn-style lug nuts, suitable for replacing an entire axle’s hardware or maintaining a spare collection for multi-lug applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread pitch: 1\/2-20 (imperial).\u003c\/li\u003e\n  \u003cli\u003eNut height: 1.38\" (35 mm) tall acorn profile.\u003c\/li\u003e\n  \u003cli\u003eDrive size: 19 mm (3\/4\") hex.\u003c\/li\u003e\n  \u003cli\u003eSeat angle: 60° conical (cone) seat—must match wheel seat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and care for these lug nuts?\u003c\/h3\u003e\n\u003cp\u003eInstall using a properly sized 19 mm (3\/4\") socket and torque to your vehicle manufacturer’s specifications. Periodic inspection and light cleaning will help maintain the chrome finish; reapply anti-seize or protective lubricant if you often drive in salty or wet conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTool: use 19 mm (3\/4\") socket; avoid rounded or worn sockets that can damage hex corners.\u003c\/li\u003e\n  \u003cli\u003eTorque: follow vehicle-specific torque values—do not overtighten.\u003c\/li\u003e\n  \u003cli\u003eMaintenance: clean and inspect for corrosion; recoat lug threads if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This GAsupply 20-piece lug nut set is aimed at owners of trucks, SUVs and Jeeps who need a reliable replacement or upgrade for wheels that accept 1\/2-20 studs and a 60° cone seat. It’s useful for mechanics, DIY enthusiasts, fleet managers, and anyone who prefers a full-kit purchase to match all wheel studs at once. Confirm your wheel seat type and stud size before ordering to ensure a proper fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts compatible with spline or mag wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These are 60° cone seat lug nuts for 1\/2-20 studs and won’t fit spline or mag-style wheel holes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket size is required to install these nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 19 mm (3\/4\") socket to install or remove these GAsupply lug nuts safely.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55164129771863,"sku":"B089D8FZ72","price":48.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-lug-nuts-front-packaging.jpg?v=1790350466"},{"product_id":"gasupply-m10x1-25-lug-nuts-for-atv-chrome-16-pc-14mm-hex-1-2-in-tall-60-cone-seat","title":"GAsupply M10x1.25 Lug Nuts for ATV — Chrome 16 pc, 14mm Hex, 1.2 in Tall, 60° Cone Seat","description":"\u003cp\u003e\u003cstrong\u003eGAsupply M10x1.25 Lug Nuts are a 16-piece set of chrome-plated, one-piece 14mm hex acorn nuts engineered to fit 10×1.25 studs with a 60° conical seat for ATV and small vehicle wheels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts combine a short acorn profile with corrosion-resistant chrome plating and a clear, factory-cut thread to offer a secure, finished look for compatible wheels. Built from cold-headed steel and tested for salt-spray resistance, the set is intended for owners who need a compact lug nut that matches 10×1.25 studs and a 60° seat angle. Before installing, verify your wheel studs and seat type to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lug nuts match my wheel studs and seat type?\u003c\/h3\u003e\n\u003cp\u003eThey are specifically sized for studs with a 10×1.25 thread pitch and feature a 60° conical (cone) seat. That combination is common on many ATVs and smaller passenger wheels, but not universal — double-check wheel specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: M10 x 1.25 (metric fine thread)\u003c\/li\u003e\n  \u003cli\u003eSeat: 60° conical seat for secure centering\u003c\/li\u003e\n  \u003cli\u003eProfile: Short\/small acorn (caps full stud length)\u003c\/li\u003e\n  \u003cli\u003eQuantity: 16 pieces per set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical dimensions and driver requirements?\u003c\/h3\u003e\n\u003cp\u003eEach lug nut measures about 1.2 inches (30 mm) tall and is driven with a 14mm socket or wrench. The compact acorn shape keeps the overall height low while still protecting exposed stud threads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeight: 1.2 in \/ 30 mm\u003c\/li\u003e\n  \u003cli\u003eHex size: 14 mm for standard sockets\u003c\/li\u003e\n  \u003cli\u003eMaterial: cold-headed steel one-piece construction\u003c\/li\u003e\n  \u003cli\u003eFinish: chrome plating with anti-rust oil coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant are these chrome lug nuts?\u003c\/h3\u003e\n\u003cp\u003eGAsupply uses a one-piece steel design and chrome plating combined with an anti-rust oil to resist corrosion and keep threads clean. The manufacturing process includes extended salt-spray testing to reduce the risk of surface degradation in demanding conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction: solid one-piece steel for strength\u003c\/li\u003e\n  \u003cli\u003eFinish: chrome plating plus anti-rust oil for added protection\u003c\/li\u003e\n  \u003cli\u003eTesting: produced to withstand extended salt-spray exposure\u003c\/li\u003e\n  \u003cli\u003eInstallation: clean, well-formed threads for easy fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how will this change the look of my wheels?\u003c\/h3\u003e\n\u003cp\u003eThe set contains 16 chrome acorn lug nuts packaged in GAsupply’s compact retail box for easy storage. Swapping to these chrome nuts can give wheels a neater, polished appearance while keeping the ends of studs covered and protected.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContents: 16 acorn lug nuts in premium packaging\u003c\/li\u003e\n  \u003cli\u003eAppearance: bright chrome finish for a cleaner wheel look\u003c\/li\u003e\n  \u003cli\u003eProtection: caps exposed stud threads from dirt and corrosion\u003c\/li\u003e\n  \u003cli\u003eSupport: GAsupply customer service available for compatibility questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 16-piece GAsupply M10x1.25 set is aimed at ATV owners, small-vehicle drivers, and anyone with wheels that require a 10×1.25 thread and 60° conical seat who want a short acorn profile and a chrome finish. If you need a compact, factory-style lug nut that covers stud tips and improves wheel aesthetics, and your wheels match the listed specs, this set is a practical choice. Always confirm thread size and seat angle before ordering to ensure safe fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my ATV wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit wheels with 10×1.25 studs and a 60° conical seat. Verify your vehicle’s thread pitch and seat angle before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket size do I need to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 14mm socket or wrench. Each nut is 1.2 inches tall and accepts a 14mm driver.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55164431827287,"sku":"B08XQD418Q","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-chrome-lug-nuts-front-view.jpg?v=1790352587"},{"product_id":"gasupply-m12x1-5-black-lug-nuts-20pcs-key-35mm-tall-60-conical-6-spline-anti-theft-finish","title":"GAsupply M12x1.5 Black Lug Nuts 20pcs + Key — 35mm Tall 60° Conical, 6-Spline Anti-Theft Finish","description":"\u003cp\u003e\u003cstrong\u003eGAsupply 12x1.5 Black Lug Nuts are a 20-piece set of 6-spline, 35mm tall conical-seat wheel nuts with a matching key, built to replace or upgrade M12x1.5 studs while improving wheel appearance and durability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts are engineered for wheels that use M12x1.5 threads and a 60° conical seat. The one-piece steel construction and electrophoresis black finish resist corrosion and fading, while the included spline key fits the 6-spline pattern for secure installation and anti-theft convenience. This product combines a practical fitment specification with an aesthetic blackout look to modernize a vehicle’s wheelset.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my car or aftermarket wheels?\u003c\/h3\u003e\n\n\u003cp\u003eCompatibility depends on two key measurements: thread pitch and seat type. Confirm your vehicle’s stud specification is M12x1.5 (often noted as 12x1.5) and that your wheels accept a 60° conical (acorn) seat. If both match, these lug nuts will thread on properly and seat securely.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread size: 12x1.5 (M12x1.5)\u003c\/li\u003e\n  \u003cli\u003eSeat type: 60° conical (acorn)\u003c\/li\u003e\n  \u003cli\u003eLug nut height: 35mm (1.38\")\u003c\/li\u003e\n  \u003cli\u003eHex\/driver requirement: 19mm (3\/4\") wrench for the hex portion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these lug nuts perform in terms of durability and finish?\u003c\/h3\u003e\n\n\u003cp\u003eEach lug nut is machined as a solid one-piece steel unit and finished using electrophoresis, which improves adhesion and resists chipping better than basic paint. Threads are cleaned and cut to provide smooth installation with minimal cross-thread risk, and the black finish reduces visible corrosion and maintains a factory-like appearance longer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: high-strength steel one-piece construction\u003c\/li\u003e\n  \u003cli\u003eFinish: electrophoresis black coating for long-lasting color\u003c\/li\u003e\n  \u003cli\u003eThread condition: clear, clean-cut threads for easier mounting\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistance: improved vs. basic painted nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how do I install them safely?\u003c\/h3\u003e\n\n\u003cp\u003eThe set includes 20 spline-drive acorn lug nuts plus a matching spline key socket for installation and removal. Use the spline key to engage the nuts, then tighten to the vehicle manufacturer’s recommended torque with a 19mm socket or torque wrench to ensure safe wheel mounting. Always tighten in the recommended star pattern and recheck torque after the first 50–100 miles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 20 spline lug nuts + 1 spline key socket tool\u003c\/li\u003e\n  \u003cli\u003eRecommended tool: 19mm (3\/4\") torque wrench for final torque\u003c\/li\u003e\n  \u003cli\u003eInstallation tip: tighten in a star pattern and retorque after initial driving\u003c\/li\u003e\n  \u003cli\u003ePackaging: compact, protective retail box for storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these lug nuts improve my vehicle’s look without affecting safety?\u003c\/h3\u003e\n\n\u003cp\u003eYes—when matched to the correct stud and seat type, these lug nuts provide a sleek, blacked-out aesthetic while maintaining proper mechanical engagement. They are designed to meet fitment and torque requirements; however, they do not change wheel alignment, tire performance, or load ratings. Always follow torque specs and periodic inspections for continued safety.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVisual upgrade: blackout finish for a modern wheel appearance\u003c\/li\u003e\n  \u003cli\u003eFunction: secure 60° seat engagement with proper torque\u003c\/li\u003e\n  \u003cli\u003eMaintenance: inspect threads and coating during routine tire service\u003c\/li\u003e\n  \u003cli\u003eDo not use if seat or thread type mismatches the wheel or stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The GAsupply 12x1.5 Black Lug Nuts set is aimed at vehicle owners and wheel enthusiasts who need a direct replacement for M12x1.5, 60° conical-seat lug nuts and want a durable black finish. It’s a good choice for drivers updating factory chrome or plain nuts to a sportier look, for aftermarket wheels that require spline-drive acorn nuts, and for anyone who prefers receiving a complete set with a matching key for installation and anti-theft convenience. Confirm fitment before purchase to ensure safe, reliable use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit all cars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit only wheels\/studs with M12x1.5 thread and 60° conical seat. Confirm your vehicle’s specifications first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is a special tool required to remove them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No; the included spline key fits these 6-spline nuts, and a 19mm wrench or torque wrench finishes the job.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55164478521687,"sku":"B08KXQYV9N","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-front-packaging.jpg?v=1790352704"},{"product_id":"gasupply-spline-lug-nuts-m12x1-5-20pc-chrome-35mm-tall-60-conical-with-duplex-key","title":"GAsupply spline lug nuts M12x1.5 — 20pc Chrome 35mm Tall 60° Conical with Duplex Key","description":"\u003cp\u003e\u003cstrong\u003eGAsupply 12x1.5 spline lug nuts are a 20-piece chromed acorn set with a 35mm (1.38\") tall conical seat design and one duplex spline key for secure, tamper-resistant wheel fastening.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need replacement tuner-style lug nuts for wheels that accept M12x1.5 studs with a 60° conical seat, this complete kit supplies 20 hardened steel spline lug nuts and a dedicated key so you can mount wheels with a cleaner, factory-like appearance. The lugs are manufactured as one-piece units, finished in chrome plating and protected with anti-rust treatment to resist corrosion and maintain shine under road conditions. They are sized for common tuner and aftermarket wheels but require confirmation that your wheel studs and seat angle match before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lug nuts fit my wheels?\u003c\/h3\u003e\n\u003cp\u003eThese lug nuts are built specifically for studs with an M12x1.5 thread pitch and a 60° conical seat. They will not fit wheels designed for different thread sizes or seat types, so matching the lug thread and seat geometry is essential to safe installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread size: M12 x 1.5 (12x1.5)\u003c\/li\u003e\n  \u003cli\u003eSeat: 60° conical (conical seat)\u003c\/li\u003e\n  \u003cli\u003eHeight: 35 mm (1.38\") tall acorn profile\u003c\/li\u003e\n  \u003cli\u003eQuantity: 20 lug nuts plus 1 duplex spline key\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and steps should I use to install them?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward but should be done carefully. Use a manual wrench to avoid over-torquing; avoid impact wrenches which can damage the spline pattern and alter torque accuracy.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKey required: included duplex spline key matched to the spline pattern\u003c\/li\u003e\n  \u003cli\u003eWrench sizes: fits 3\/4\" (19 mm) and 13\/16\" (21 mm) tool openings\u003c\/li\u003e\n  \u003cli\u003eRecommended: hand torque wrench to factory torque spec for your vehicle\u003c\/li\u003e\n  \u003cli\u003eProfessional installation suggested if you lack wheel-fitment experience\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and corrosion protection do these nuts offer?\u003c\/h3\u003e\n\u003cp\u003eEach lug nut is made from a single-piece forged steel construction for strength and integrity. They receive multi-layer chrome plating and anti-rust treatment to improve corrosion resistance and preserve appearance over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction: solid one-piece steel design\u003c\/li\u003e\n  \u003cli\u003eFinish: multi-layer chrome plating for shine and protection\u003c\/li\u003e\n  \u003cli\u003eCorrosion testing: salt spray resistance applied during production\u003c\/li\u003e\n  \u003cli\u003eAdditional: anti-rust oil coating for extended shelf and road life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These GAsupply spline lug nuts suit drivers upgrading to tuner-style chromed acorn nuts, owners replacing worn or damaged lug hardware on M12x1.5 stud wheels, and shops fitting aftermarket wheels that require a 60° conical seat. If you drive a vehicle with compatible studs and want a durable, visually clean fastening solution—backed by a dedicated spline key—this 20-piece kit simplifies installation while keeping wheel aesthetics consistent. Confirm fitment for your specific wheel and vehicle before purchasing and use proper hand tools to secure them to factory torque specifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these lug nuts fit my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit only M12x1.5 studs with a 60° conical seat. Confirm your vehicle's stud size and seat type before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use an impact wrench to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Use a manual wrench or torque wrench to avoid damaging the spline and to ensure correct torque.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55164478587223,"sku":"B08KXW3PG7","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-front-packed-set.jpg?v=1790352704"},{"product_id":"gasupply-1-2-20-black-acorn-lug-nuts-20pc-1-38-in-tall-60-cone-seat-3-4-in-19mm-hex","title":"GAsupply 1\/2-20 Black Acorn Lug Nuts 20pc — 1.38 in Tall, 60° Cone Seat, 3\/4 in (19mm) Hex","description":"\u003cstrong\u003eGAsupply 20pcs 1\/2x20 Black Acorn Lug Nuts are a set of closed-end, 1.38\" tall steel lug nuts with a 60° conical seat designed for wheels using 1\/2\"-20 studs.\u003c\/strong\u003e\n\n\u003cp\u003eThese lug nuts provide a low-profile acorn (bulge) design finished in durable black electrophoresis coating. They are engineered for wheels that accept 60° cone seat fasteners and use a 3\/4\" (19mm) hex socket for installation. The set includes twenty pieces packaged for convenient storage and transport.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my wheels and studs?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on the thread pitch and seat type of your vehicle's wheel studs and lug seats. These nuts are cut for 1\/2\"-20 threads and require a 60° conical seat; they will not fit tapered or ball-seat wheels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread size: 1\/2\"-20 (1\/2 x 20)\u003c\/li\u003e\n  \u003cli\u003eSeat type: 60° conical (cone seat)\u003c\/li\u003e\n  \u003cli\u003eHeight: 1.38\" (35 mm) tall acorn\/bulge design\u003c\/li\u003e\n  \u003cli\u003eHex: 3\/4\" (19 mm) socket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the black finish and steel construction?\u003c\/h3\u003e\n\u003cp\u003eThe nuts are forged from high-quality steel and coated using an electrophoresis process that helps resist rust and fading compared with untreated metal. Proper installation and periodic inspection will extend appearance and corrosion resistance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: high-strength steel core for secure clamping\u003c\/li\u003e\n  \u003cli\u003eFinish: black electrophoresis for long-lasting color retention\u003c\/li\u003e\n  \u003cli\u003eThreading: cleanly cut threads for smooth installation\u003c\/li\u003e\n  \u003cli\u003eClosed-end design: protects threads from dirt and moisture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and torque specs do I need to install them?\u003c\/h3\u003e\n\u003cp\u003eInstall with a 3\/4\" (19 mm) socket or an appropriately sized impact socket. Always follow your vehicle manufacturer’s recommended torque values to ensure proper seating and safe wheel clamping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSocket size: 3\/4\" (19 mm)\u003c\/li\u003e\n  \u003cli\u003eCompatible with hand or impact tools rated for lug nuts\u003c\/li\u003e\n  \u003cli\u003eUse a calibrated torque wrench for final tightening to OEM torque specs\u003c\/li\u003e\n  \u003cli\u003eCheck torque after initial road use per vehicle guidelines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how are they packaged?\u003c\/h3\u003e\n\u003cp\u003eThe package contains twenty closed-end bulge acorn lug nuts in black, supplied in compact, premium-style packaging for neat storage. The nuts arrive ready to install and are suitable as a full replacement set for four- or five-lug wheels depending on your vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuantity: 20 lug nuts per kit\u003c\/li\u003e\n  \u003cli\u003eDesign: acorn (bulge) closed-end nuts\u003c\/li\u003e\n  \u003cli\u003ePackaging: portable, premium packaging for storage\u003c\/li\u003e\n  \u003cli\u003eRecommended: confirm fitment with wheel stud specifications before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit for? This 20-piece GAsupply lug nut set is aimed at drivers, DIY mechanics, and wheel shops needing a full set of replacement nuts for vehicles using 1\/2\"-20 studs and 60° cone seats. It suits anyone who wants a black, low-profile acorn appearance with thread protection from a closed-end design. If you’re unsure about fit, compare these specifications to your wheel studs and seat type or consult a professional before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts compatible with 3\/8\" studs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These are 1\/2\"-20 thread lug nuts and will not fit 3\/8\" studs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts require a special key?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special key is required; they use a standard 3\/4\" (19 mm) hex socket.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55164653109591,"sku":"B08XQDL4XJ","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-front-packaging-black-lug-nuts.jpg?v=1790353977"},{"product_id":"gasupply-12x1-25-spline-lug-nuts-chrome-20-pack-1-38in-acorn-with-60-cone-seat","title":"GAsupply 12x1.25 Spline Lug Nuts, Chrome 20-Pack — 1.38in Acorn with 60° Cone Seat","description":"\u003cp\u003e\u003cstrong\u003eGAsupply 12x1.25 spline lug nuts are a 20-piece chrome acorn set with a 60° conical seat and one spline key, designed to replace factory lug nuts on compatible wheels while improving appearance and corrosion resistance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts are engineered for wheels with 12×1.25 studs and a 60° conical (cone) seat. Each nut is a one-piece acorn (tuner-style) design, 1.38 inches (35 mm) tall, with a six-spline drive pattern requiring the included spline key to install or remove. The polished chrome finish is electroplated in multiple layers and treated for rust resistance, making the set suitable for street use where style and longevity both matter.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my vehicle and wheels?\u003c\/h3\u003e\n\u003cp\u003eThey fit only wheels and studs that specify 12×1.25 thread pitch and a 60° cone seat. Measure your existing lug nuts or consult your owner's manual to confirm compatibility before ordering. Using the wrong thread or seat type can damage studs or wheels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread pitch: 12×1.25 (metric)\u003c\/li\u003e\n  \u003cli\u003eSeat type: conical\/60° cone\u003c\/li\u003e\n  \u003cli\u003eNut height: 1.38 in (35 mm) acorn\/tuner style\u003c\/li\u003e\n  \u003cli\u003eIncludes: 20 lug nuts + 1 spline key tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these spline lug nuts install and remove?\u003c\/h3\u003e\n\u003cp\u003eInstallation and removal require the included spline key because the nuts have a spline-drive outer profile rather than a conventional hex. Fit the key over the splines, then use a compatible socket or wrench on the key to torque the nut. Tighten to your vehicle manufacturer's specified torque with a torque wrench for safe, reliable contact between the cone seat and wheel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the supplied spline key for drive engagement\u003c\/li\u003e\n  \u003cli\u003eApply vehicle-specified torque with a torque wrench\u003c\/li\u003e\n  \u003cli\u003eConfirm seat alignment before final tightening\u003c\/li\u003e\n  \u003cli\u003eDo not reuse damaged lug nuts or studs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and corrosion protection do these lug nuts offer?\u003c\/h3\u003e\n\u003cp\u003eGAsupply lug nuts are cold-headed from high-quality steel and plated with four layers of chrome-like finish. The plating process plus an anti-rust oil treatment gives extended resistance to salt spray and road contaminants compared with uncoated steel. They are built for street use where resistances to rust and finish fading are important.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction: one-piece high-strength steel\u003c\/li\u003e\n  \u003cli\u003eFinish: multi-layer electroplating for shine and protection\u003c\/li\u003e\n  \u003cli\u003eCorrosion test: extended salt-spray resistance\u003c\/li\u003e\n  \u003cli\u003ePre-treated with anti-rust oil\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will these lug nuts change the look and maintenance of my wheels?\u003c\/h3\u003e\n\u003cp\u003eThe acorn tuner profile adds a clean, finished appearance that covers studs and wheel surfaces for a tidy wheel face. Chrome plating keeps them reflective and easy to wipe clean; regular washing and periodic inspection will maintain both appearance and safety. Because they are one-piece steel, they are more durable than thin decorative caps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStyle: polished acorn\/tuner look hides exposed studs\u003c\/li\u003e\n  \u003cli\u003eMaintenance: wipe-clean finish and routine inspections\u003c\/li\u003e\n  \u003cli\u003eDurability: solid one-piece construction\u003c\/li\u003e\n  \u003cli\u003ePackaging: premium box for storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These lug nuts suit car and light-truck owners who need a 12×1.25 thread with a 60° cone seat and want a durable, attractive replacement set. They are ideal for drivers upgrading from worn factory nuts, installing aftermarket wheels that accept conical seats, or anyone who prefers the cleaner look of acorn lug nuts plus the security and convenience of a spline key. Always verify fitment and follow proper torque procedures during installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit 12×1.5 studs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These are 12×1.25 thread pitch; 12×1.5 is a different size and will not fit safely.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the spline key included for removal?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The set includes one spline lug key designed to install and remove the nuts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55165016998231,"sku":"B094NKVZ9D","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-front-view-chrome-lug-nuts.jpg?v=1790354469"},{"product_id":"gasupply-m12x1-25-chrome-lug-nuts-20pc-1-38-tall-3-4-19mm-hex-60-cone-seat","title":"GAsupply M12x1.25 Chrome Lug Nuts 20pc — 1.38\" Tall, 3\/4\" (19mm) Hex, 60° Cone Seat","description":"\u003cstrong\u003eGAsupply 20-piece M12×1.25 chrome acorn lug nut set — 1.38\" tall with a 3\/4\" (19mm) hex and 60° conical seat for compatible wheels.\u003c\/strong\u003e\n\n\u003cp\u003eThese lug nuts are a compact, chrome-finished replacement set engineered for wheels that use 12×1.25 studs and a 60° conical seat. Manufactured from cold-headed steel and finished with corrosion-resistant treatments, this 20-piece kit is packaged for neat storage and designed to refresh the look of compatible rims while providing proper seating on matching bolts. Verify stud pitch and seat type before ordering to ensure fit.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lug nuts fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on three simple dimensions: thread pitch, thread diameter, and seat geometry. These lug nuts are specifically made for M12×1.25 threads and a 60° conical (cone) seat; they will not properly fit wheels that require different pitches or seat types.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: 12×1.25 mm (fine pitch)\u003c\/li\u003e\n  \u003cli\u003eSeat: 60° conical seat (matches tapered lug holes)\u003c\/li\u003e\n  \u003cli\u003eHex size: 3\/4\" (19 mm) for installation tools\u003c\/li\u003e\n  \u003cli\u003eTall: 1.38\" (35 mm) overall nut height\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finish protect against rust and wear?\u003c\/h3\u003e\n\u003cp\u003eThe nuts are produced by cold-heading high-strength steel for consistent threads and shape, then treated to resist corrosion. They undergo an extended salt-spray evaluation and receive anti-rust oil so they maintain appearance and function in common road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCold-headed steel core for toughness and dimensional accuracy\u003c\/li\u003e\n  \u003cli\u003eChrome plating for visual appeal and surface protection\u003c\/li\u003e\n  \u003cli\u003eAnti-rust oil coating to delay oxidation and staining\u003c\/li\u003e\n  \u003cli\u003eSalt-spray tested to assess corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and torque these acorn lug nuts safely?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard wheel-fastening practice: hand-thread each nut to avoid cross-threading, tighten in a crisscross pattern, then torque to your vehicle manufacturer’s specified setting. Because these are acorn-style nuts with a 3\/4\" hex, use the matching socket—avoid impact tools if possible when final torquing to prevent damage to the chrome finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-start each nut to prevent cross-threading\u003c\/li\u003e\n  \u003cli\u003eTighten wheels in a star\/crisscross pattern for even seating\u003c\/li\u003e\n  \u003cli\u003eUse a 3\/4\" (19 mm) socket and torque wrench for final torque\u003c\/li\u003e\n  \u003cli\u003eRefer to vehicle torque specs; avoid over-tightening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what service can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains twenty acorn-style lug nuts presented in GAsupply-branded packaging that’s compact for storage. If you have questions about fitment or a product issue, customer support is available to help confirm compatibility or resolve concerns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuantity: 20 acorn lug nuts per package\u003c\/li\u003e\n  \u003cli\u003ePackaging: portable, protective retail box for storage\u003c\/li\u003e\n  \u003cli\u003eSupport: manufacturer customer service for fitment and returns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This set is aimed at drivers, enthusiasts, and Professional Service shops looking to replace worn or missing lug nuts on wheels that require M12×1.25 threads and a 60° conical seat. Choose this kit if you want a chrome-accented appearance, a reliable steel construction, and a full set of 20 nuts to fit multiple wheels or as spare inventory. Confirm your bolt pitch, seat type, and required hex size before purchasing to ensure correct fit and safe installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my car's wheel studs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit wheels with M12×1.25 studs and a 60° conical seat. Confirm your vehicle’s thread pitch and seat type before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket size do I need to install these?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 3\/4\" (19 mm) socket for installation; finish with a torque wrench to your vehicle's specified torque.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55165560750423,"sku":"B08XQD418R","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-chrome-lug-nuts-front-packaging.jpg?v=1790355560"},{"product_id":"gasupply-1-2-20-lug-nuts-20pc-chrome-1-9-tall-bulge-acorn-3-4-hex-60-cone-seat-corrosion-resistant","title":"GAsupply 1\/2-20 Lug Nuts 20pc Chrome 1.9\" Tall Bulge-Acorn — 3\/4\" Hex, 60° Cone Seat, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eGAsupply 1\/2-20 lug nuts are a 20-piece set of 1.9\" tall, chrome-plated, cone-seat wheel nuts designed for vehicles with 1\/2\"-20 studs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a reliable, long-bulge acorn lug nut that suits many Ford, Jeep, and other popular models, this set delivers corrosion-resistant steel construction, clear threads for easy installation, and a chrome finish that complements alloy and steel wheels. The pack includes twenty identical nuts finished with multi-layer electroplating and anti-rust oil for longer life and improved appearance.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my vehicle and wheels?\u003c\/h3\u003e\n\u003cp\u003eThese lug nuts are built for wheels that accept a 60° cone seat and 1\/2\"-20 wheel studs. They are commonly compatible with a variety of models across manufacturers, but you should confirm stud thread and seat type before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread size: 1\/2\"-20 (UNC)\u003c\/li\u003e\n  \u003cli\u003eSeat type: 60° cone seat (cone\/concave)\u003c\/li\u003e\n  \u003cli\u003eNut dimensions: 1.9\" (48 mm) total length, 3\/4\" (19 mm) hex\u003c\/li\u003e\n  \u003cli\u003eIncluded quantity: 20 lug nuts in chrome finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the chrome finish and what prevents rust?\u003c\/h3\u003e\n\u003cp\u003eThe nuts are cold-headed from high-quality steel and treated with four-layer electroplating followed by anti-rust oil to resist corrosion. The manufacturer also reports salt spray testing approaching 72 hours to improve longevity under road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCold-headed steel construction for strength\u003c\/li\u003e\n  \u003cli\u003eFour-layer electroplating for surface protection\u003c\/li\u003e\n  \u003cli\u003eAnti-rust oil coating for added corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eSalt spray tested to help prevent early fading or rust\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy are these lug nuts to install and remove?\u003c\/h3\u003e\n\u003cp\u003eThe threads are described as clear and clean, which simplifies hand-starting and threading onto studs. Use a 3\/4\" (19 mm) wrench or socket for installation and follow torque specifications for your vehicle; professional installation is recommended if you are unsure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHex size: 3\/4\" (19 mm) — fits standard sockets\/wrenches\u003c\/li\u003e\n  \u003cli\u003eClear threads reduce cross-threading risk\u003c\/li\u003e\n  \u003cli\u003eLong bulge-acorn design provides added engagement length\u003c\/li\u003e\n  \u003cli\u003eRecommended: follow vehicle torque specs; consider professional install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how is it packaged?\u003c\/h3\u003e\n\u003cp\u003eThe set ships with 20 identical chrome long lug nuts in GAsupply’s premium packaging for neat storage and transport. The packaging is compact and designed to keep the nuts secure until installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContents: 20 chrome long bulge-acorn lug nuts (1\/2\"-20)\u003c\/li\u003e\n  \u003cli\u003ePackaging: GAsupply branded premium packaging for storage\u003c\/li\u003e\n  \u003cli\u003eLabeling: includes size and seat type for quick identification\u003c\/li\u003e\n  \u003cli\u003eNote: verify wheel seat type and stud size before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This 20-piece GAsupply lug nut set is intended for car owners, mechanics, and fleet managers fitting wheels that require a 60° cone seat and 1\/2\"-20 studs. It suits enthusiasts replacing worn lug nuts, shops stocking service parts, and anyone looking for a chrome finish with enhanced corrosion protection. If your wheels use a different seat type or stud size, select a matching nut specification rather than this set.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts compatible with Jeep Wrangler wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit Wrangler models that use 1\/2\"-20 studs and 60° cone seats; confirm your wheel's seat type before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket size do I need to install these lug nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 3\/4\" (19 mm) socket or wrench to install and remove these lug nuts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55167150063959,"sku":"B089D9FRMF","price":52.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-front-packaging-chrome-lug-nuts_fce25a37-dec2-422d-9aa2-5b765a9fece6.jpg?v=1790376940"},{"product_id":"gasupply-1-2x20-lug-nuts-20pc-black-1-9-tall-closed-end-cone-seat-3-4-hex-electrophoretic-finish","title":"GAsupply 1\/2x20 Lug Nuts 20pc Black 1.9\" Tall Closed-End Cone Seat — 3\/4\" Hex, Electrophoretic Finish","description":"\u003cp\u003e\u003cstrong\u003eGAsupply 1\/2x20 lug nuts are a 20-piece set of 1.9\" tall, closed-end bulge acorn nuts with 1\/2-20 threads and a 60° cone seat, finished in durable black for corrosion resistance and a clean wheel look.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts are built for vehicles that use 1\/2-20 wheel studs and cone-seat wheels. Each nut is a single-piece steel design, cold-headed for strength and finished with an electrophoretic black coating to help resist rust and discoloration. The long, closed-end bulge profile gives wheels a finished appearance while protecting threads from dirt and moisture.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my wheels and studs?\u003c\/h3\u003e\n\u003cp\u003eThey are specifically made for 1\/2-20 (1\/2x20) wheel studs and 60° cone-seat wheels. Confirm your wheel stud thread and seat type before purchasing to ensure safe fitment. If unsure, check your vehicle manual or measure an existing lug nut.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread size: 1\/2\"-20 (UNF)\u003c\/li\u003e\n  \u003cli\u003eSeat angle: 60° cone (cone seat)\u003c\/li\u003e\n  \u003cli\u003eCompatibility: cone-seat wheels only, not compatible with ball-seat or mag-style seats\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and protective is the black finish?\u003c\/h3\u003e\n\u003cp\u003eThe black finish is applied via electrophoresis, which bonds the coating evenly and increases corrosion resistance compared with simple paint. The underlying cold-headed steel gives the nut structural strength, and the closed-end design keeps dirt and moisture away from the thread roots. Regular inspection and torque checks are still recommended to maintain wheel safety.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFinish: electrophoretic black coating for even coverage\u003c\/li\u003e\n  \u003cli\u003eMaterial: high-strength cold-headed steel\u003c\/li\u003e\n  \u003cli\u003eDesign benefit: closed-end protects threads from contaminants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and how do I install them?\u003c\/h3\u003e\n\u003cp\u003eEach nut is 1.9 inches (48 mm) tall with a 3\/4-inch (19 mm) hex drive. They install with a 3\/4\" socket or compatible iron impact socket, tightened to your vehicle manufacturer’s specified torque. Because these are long closed-end nuts, ensure the stud engagement depth is sufficient and follow professional torque procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall height: 1.9\" (48 mm)\u003c\/li\u003e\n  \u003cli\u003eDrive size: 3\/4\" hex (19 mm)\u003c\/li\u003e\n  \u003cli\u003ePack size: 20 pieces — full set for most 4x4, truck, or multi-lug applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these safe to use with aftermarket wheels?\u003c\/h3\u003e\n\u003cp\u003eThey can be used with aftermarket wheels that accept 60° cone-seat lug nuts and 1\/2-20 studs. Always verify the wheel’s seat style and stud length to avoid improper contact or insufficient thread engagement. If in doubt, consult the wheel manufacturer or a trusted installer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBest for wheels specifying 60° cone seat\u003c\/li\u003e\n  \u003cli\u003eNot suitable for spline-drive or ball-seat wheel applications\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended for safety and correct torque\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These GAsupply lug nuts suit drivers and mechanics replacing or upgrading lug hardware on trucks, SUVs, and other vehicles that use 1\/2-20 cone-seat studs. They’re a good choice for anyone who wants a durable black finish, closed-end protection for threads, and a long acorn-style look. If you need a full 20-piece set for multi-lug setups or spare hardware, this set provides matching nuts packaged for easy storage and transport.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit 1\/2-20 wheel studs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they are 1\/2\"-20 thread size and require a 60° cone seat wheel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket size is needed to install these nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 3\/4\" (19 mm) hex socket; torque to your vehicle manufacturer’s specification.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55167150031191,"sku":"B089D9L8G7","price":52.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-front-packaging-lug-nuts.jpg?v=1790376941"},{"product_id":"gasupply-chrome-lug-nuts-1-2-20-thread-35mm-tall-60-cone-seat-20pcs-spline-key-closed-end","title":"GAsupply Chrome Lug Nuts 1\/2-20 Thread, 35mm Tall 60° Cone Seat — 20pcs + Spline Key, Closed-End","description":"\u003cp\u003e\u003cstrong\u003eGAsupply 1\/2 x 20 chrome lug nuts are a 20-piece set of 1.38\" (35mm) tall, 60° conical-seat acorn nuts with a matching spline key for secure wheel fastening and a polished chrome finish.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts are built for vehicles that use 1\/2\"-20 studs and a 60° conical seat. Each nut is one solid piece of cold-headed steel with a small closed-end tuner style and six-spline pattern. Finished through a multi-layer electroplating process, the set includes 20 nuts and one dedicated spline key so you can install or remove them without altering the wheel face. Before buying, confirm that your vehicle’s studs and seat angle match these specifications to ensure safe fitment.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my wheels and studs?\u003c\/h3\u003e\n\u003cp\u003eThey are made specifically for wheels that accept 1\/2\"-20 studs and a 60° conical (cone) seat. Fit depends on both thread pitch and seat geometry; the 1.38\" (35mm) overall height and closed-end design are also factors to check against wheel clearance and hub-to-rim depth.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: 1\/2\"-20 (UNF) — confirm your studs match this pitch.\u003c\/li\u003e\n  \u003cli\u003eSeat type: 60° conical — required for proper seating and torque.\u003c\/li\u003e\n  \u003cli\u003eHeight: 1.38\" \/ 35mm — verify there’s enough wheel well or cap clearance.\u003c\/li\u003e\n  \u003cli\u003eTool sizes: 3\/4\" (19mm) and 13\/16\" (21mm) fit common torque tools; included spline key for the tuner face.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant are these chrome lug nuts?\u003c\/h3\u003e\n\u003cp\u003eThe nuts are manufactured from steel with a solid one-piece construction and cold-heading for strength. They receive a multi-layer chrome plating and are tested against salt spray to improve rust resistance; plus an anti-rust oil is applied for additional protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction: one-piece cold-headed steel for long-term strength.\u003c\/li\u003e\n  \u003cli\u003eFinish: four-layer electroplating for a bright, protective chrome surface.\u003c\/li\u003e\n  \u003cli\u003eTesting: salt spray exposure to reduce corrosion risk.\u003c\/li\u003e\n  \u003cli\u003eMaintenance: anti-rust oil applied; periodic inspection recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and accessories come with the set?\u003c\/h3\u003e\n\u003cp\u003eThe package contains 20 chrome acorn lug nuts and a single matching spline key for installation and removal. The tuner-style closed ends require the supplied key for access, which helps prevent casual theft and keeps the wheel face neat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 20 lug nuts + 1 spline key tool packaged together.\u003c\/li\u003e\n  \u003cli\u003eTool compatibility: also removable with 3\/4\" (19mm) or 13\/16\" (21mm) sockets depending on application.\u003c\/li\u003e\n  \u003cli\u003ePackaging: compact, premium box for storage and transport.\u003c\/li\u003e\n  \u003cli\u003eRecommendation: professional installation advised to ensure correct torque and seating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These GAsupply chrome lug nuts suit drivers and DIY enthusiasts who want a polished, tuner-style acorn look while maintaining secure wheel attachment on vehicles with 1\/2\"-20 studs and 60° cone seats. They are ideal for street cars, light trucks, and aftermarket wheels that match the spec, especially when you want theft-deterrent spline-style faces and a chrome finish that blends with classic and modern rims. Always confirm fitment with your vehicle’s wheel studs and mounting spec and consider professional installation for safety and accurate torqueing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit 1\/2\"-20 wheel studs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these are specifically 1\/2\"-20 thread size and require a 60° conical seat for proper fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is a special tool included to remove the tuner-style face?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the set includes one matching spline key designed to install and remove the tuner-style closed-end nuts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55167179161943,"sku":"B08KXPJLB9","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-chrome-lug-nuts-front-packaging_aab9146b-cd9d-444d-880a-c4414b51affd.jpg?v=1790377367"},{"product_id":"gasupply-m14x1-5-lug-bolts-for-wheel-spacers-28mm-shank-17mm-hex-chrome-20pc","title":"GAsupply M14x1.5 Lug Bolts for Wheel Spacers — 28mm Shank, 17mm Hex, Chrome 20pc","description":"\u003cp\u003e\u003cstrong\u003eGAsupply M14x1.5 lug bolts are aftermarket chrome steel wheel bolts with a 28mm threaded shank and conical (acorn) seat, supplied as a pack of 20 for use with wheel spacers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug bolts are designed for drivers who need longer-than-stock fasteners when fitting spacers or specific aftermarket wheels. Each bolt is one-piece steel with a polished chrome finish, a 17mm hex head for common sockets, and a 28mm thread length that provides added engagement through spacers. They are not OEM parts; correct fit depends on matching your vehicle's seat type, thread pitch, and the combined length of original bolts plus spacer thickness.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know these bolts will fit my vehicle and wheels?\u003c\/h3\u003e\n\n\u003cp\u003eCompatibility hinges on three factors: thread pitch (M14x1.5), seat shape (conical\/acorn), and total thread length needed. Measure your original bolt's threaded length and confirm your wheel’s lug seat type before buying. If you use spacers, add spacer thickness to the OEM bolt length and compare with these 56mm overall bolts.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThread: M14 x 1.5 — check your vehicle’s spec.\u003c\/li\u003e\n  \u003cli\u003eSeat type: conical (acorn) — must match the wheel’s lug seat.\u003c\/li\u003e\n  \u003cli\u003eThread engagement: 28mm shank for spacer applications.\u003c\/li\u003e\n  \u003cli\u003eHex size: 17mm — use a compatible socket or key.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these bolts safe to use with wheel spacers?\u003c\/h3\u003e\n\n\u003cp\u003eYes, these bolts are intended for spacer use when the combined OEM bolt length and spacer thickness exceed factory engagement. They provide extra thread length to maintain secure clamping through a spacer. However, installing bolts that are too short or too long is unsafe; measure carefully and follow proper installation steps.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNot OEM replacements — only use when correct length is confirmed.\u003c\/li\u003e\n  \u003cli\u003eRecommended turn-in: allow 5–8 turns before final torque.\u003c\/li\u003e\n  \u003cli\u003eAfter installation, double-check torque and re-torque after initial miles.\u003c\/li\u003e\n  \u003cli\u003eAvoid over-length bolts that could strike brake components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the materials and corrosion protections used?\u003c\/h3\u003e\n\n\u003cp\u003eGAsupply lug bolts are manufactured from high-grade steel and finished in chrome plating. The plating process and protective oil treatment reduce the risk of rust and surface fading, helping them withstand road exposure. While robust, regular inspection and maintenance are recommended in harsh climates.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstruction: one-piece high-strength steel.\u003c\/li\u003e\n  \u003cli\u003eFinish: multi-layer chrome plating for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eQuality control: salt spray resistance testing and anti-rust coating.\u003c\/li\u003e\n  \u003cli\u003eMaintenance: clean and inspect periodically for best longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation tips should I follow?\u003c\/h3\u003e\n\n\u003cp\u003eProper installation avoids mechanical issues and increases safety. Always confirm thread engagement and seat compatibility before fitting wheels. Hand-start bolts to avoid cross-threading, ensure the bolt turns freely for 5–8 full revolutions, then torque to the wheel manufacturer’s recommended specification using a calibrated wrench.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHand-thread first to prevent cross-threading.\u003c\/li\u003e\n  \u003cli\u003eVerify 5–8 turns of engagement before torquing.\u003c\/li\u003e\n  \u003cli\u003eUse a 17mm socket and follow wheel torque specs.\u003c\/li\u003e\n  \u003cli\u003eRe-check torque after the first 50–100 miles of driving.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These GAsupply M14x1.5 lug bolts are suited to enthusiasts and installers who need longer aftermarket bolts for wheel spacers or specific wheel fitments with a conical seat. They’re ideal when you require durable chrome finish bolts with a 17mm hex head and a 28mm threaded shank, but they are not drop-in OEM replacements. If you’re unsure about fitment, measure your OEM bolts, verify your wheel seat, or contact us for guidance before purchasing to ensure safe, correct installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these bolts fit my car if I have wheel spacers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They can if your vehicle uses M14x1.5 threads and conical seats and the 28mm thread length provides needed engagement through the spacer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these as direct OEM replacements?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — these are aftermarket bolts for spacer applications and are not guaranteed to match OEM bolt lengths or seat types.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55167590564183,"sku":"B0D262JKXN","price":59.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-chrome-lug-bolts-front-packaging.jpg?v=1790389138"},{"product_id":"gasupply-14x1-5-black-lug-nuts-24pc-1-9in-tall-m14x1-5-cone-seat-19mm-hex-corrosion-resistant","title":"GAsupply 14x1.5 Black Lug Nuts — 24pc, 1.9in Tall M14x1.5 Cone-Seat, 19mm Hex, Corrosion-Resistant","description":"\u003cstrong\u003eGAsupply 14x1.5 Black Lug Nuts are a 24-piece set of 1.9\" (48mm) tall, M14x1.5 conical-seat wheel nuts finished in durable black electrophoresis for secure, corrosion-resistant wheel fastening.\u003c\/strong\u003e\n\n\u003cp\u003eIf you want a reliable replacement or upgrade for M14x1.5 wheel studs that improves appearance and resists corrosion, this set of 24 black lug nuts gives you a direct-fit, 60-degree cone-seat option. The lug nuts feature a 3\/4\" (19mm) hex profile for standard tools and are engineered with clean threads and a long 1.9\" body for solid engagement on compatible wheels. They come packaged for easy storage and are optimized for vehicles that require a conical seat and the specific 14x1.5 thread pitch.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my wheels and studs?\u003c\/h3\u003e\n\u003cp\u003eThese lug nuts are designed specifically for wheels and studs that use an M14x1.5 thread and a 60-degree conical seat. Before ordering, confirm your vehicle’s thread size and seat type by checking an existing nut or your wheel manual to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread pitch: M14 x 1.5 (metric)\u003c\/li\u003e\n  \u003cli\u003eSeat type: 60° conical (cone) seat\u003c\/li\u003e\n  \u003cli\u003eNut height: 1.9 inches \/ 48 mm for deep engagement\u003c\/li\u003e\n  \u003cli\u003eHex size: 3\/4 inch \/ 19 mm for standard sockets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the black finish and material?\u003c\/h3\u003e\n\u003cp\u003eThe nuts are manufactured from high-quality steel and finished with an electrophoresis coating that provides a more uniform, long-lasting surface compared with simple paint. This finish helps reduce rust and fading while preserving a clean, low-gloss black look under road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: high-strength steel for structural durability\u003c\/li\u003e\n  \u003cli\u003eFinish: electrophoresis (black) for improved corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eThread quality: clear, machined threads for easier installation\u003c\/li\u003e\n  \u003cli\u003ePackaging: premium, portable box to protect finish during storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these lug nuts affect installation and wheel performance?\u003c\/h3\u003e\n\u003cp\u003eThe 1.9\" tall body and clean threads make these nuts straightforward to install with a 19 mm socket, and the conical seat ensures correct centering on compatible wheels. They are intended to match factory bolt angles, helping maintain wheel alignment and clamping force when torqued to the vehicle manufacturer’s specification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstallation tool: 3\/4\" (19 mm) socket or wrench\u003c\/li\u003e\n  \u003cli\u003eTorque: follow your vehicle’s specified lug torque for safety\u003c\/li\u003e\n  \u003cli\u003eSeating: 60° cone seat centers wheel on hub accurately\u003c\/li\u003e\n  \u003cli\u003eSet size: 24 pieces covers most cars, SUVs, and light trucks with matching stud patterns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what should I check on arrival?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes 24 black chrome-look lug nuts packed in a protective box. On arrival, inspect the finish, thread condition, and count to ensure all pieces are present and ready for installation. Keep packaging for transport or storage when the nuts are not fitted.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 24 GAsupply black lug nuts in premium packaging\u003c\/li\u003e\n  \u003cli\u003eInspect: confirm thread cleanliness and finish integrity\u003c\/li\u003e\n  \u003cli\u003eStorage: box design keeps parts organized and protected\u003c\/li\u003e\n  \u003cli\u003eReplacement: keep original lug torque specifications handy\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 24-piece set is ideal for car owners, DIY mechanics, and professional shops that need M14x1.5 conical-seat lug nuts with a durable black finish. Choose these if your vehicle uses 14x1.5 studs and you want a long-body nut for improved engagement, a corrosion-resistant coating, and a standard 19 mm hex for simple installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts compatible with 14x1.5 studs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they are M14x1.5 thread pitch designed for studs with a 60° conical seat.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket size do I need to install these?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 3\/4 inch (19 mm) socket or wrench; always torque to your vehicle's spec.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55167696568663,"sku":"B089D8ZMXS","price":57.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-front-packed-box.jpg?v=1790391211"},{"product_id":"gasupply-m12x1-25-oem-lug-bolts-20pc-28mm-shank-cone-seat-chrome-plated-one-piece","title":"GAsupply M12x1.25 OEM Lug Bolts 20pc — 28mm Shank Cone Seat, Chrome-Plated One-Piece","description":"\u003cp\u003e\u003cstrong\u003eGAsupply 12x1.25 OEM lug bolts are a 20-piece, one-piece chrome-plated cone-seat replacement designed for compatible Jeep, Dodge and Chrysler aluminum wheels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug bolts are built to mirror factory OEM fitment while improving durability. They use a one-piece design with a 28mm shank length and M12x1.25 threads, delivering a direct-replacement option for specified models that require conical (cone) seat bolts. The bolts receive multi-layer plating and anti-rust treatment to resist corrosion and preserve appearance over time.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and wheels will these bolts fit?\u003c\/h3\u003e\n\u003cp\u003eThey are intended for select FCA group vehicles that originally use M12x1.25 conical seat bolts and aluminum wheels. Fitment varies by year and model, so confirming the OEM bolt thread, seat style and required length is essential before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible examples: 2014+ Jeep Cherokee, 2018+ Jeep Compass, 2015+ Jeep Renegade.\u003c\/li\u003e\n  \u003cli\u003eAlso used on some Chrysler 200 (2015–2017) and Dodge Dart (2013–2016) aluminum wheels.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for iron\/steel wheels or vehicles using different thread sizes or seat types.\u003c\/li\u003e\n  \u003cli\u003eVerify your wheel uses a conical (cone) seat and M12-1.25 thread pitch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these bolts differ from original two-piece lug designs?\u003c\/h3\u003e\n\u003cp\u003eGAsupply lug bolts adopt a single-piece construction to eliminate the separate sleeve present in two-piece bolts. That reduces the risk of component separation, expansion or fatigue at the joint and provides a simpler, more robust fastener for wheel mounting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-piece design replaces two-piece assemblies for improved structural integrity.\u003c\/li\u003e\n  \u003cli\u003eLonger overall length and increased serrations enhance engagement and safety.\u003c\/li\u003e\n  \u003cli\u003e3\/4\" (19mm) hex head for standard socket fitment and torque application.\u003c\/li\u003e\n  \u003cli\u003e28mm shank (thread) length matches many OEM needs; confirm before fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the durability and corrosion protections on these bolts?\u003c\/h3\u003e\n\u003cp\u003eThese bolts are steel with a four-layer plating process and a post-plating anti-rust oil finish to extend service life in road conditions. They undergo salt-spray resistance testing to help prevent premature rust and maintain appearance on exposed wheels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength steel core for load-bearing performance.\u003c\/li\u003e\n  \u003cli\u003eFour-layer chrome plating to reduce oxidation and surface wear.\u003c\/li\u003e\n  \u003cli\u003e72-hour salt-spray tested finish plus anti-rust oil application.\u003c\/li\u003e\n  \u003cli\u003eChrome finish helps maintain aesthetic match with factory hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm fitment and install these lug bolts safely?\u003c\/h3\u003e\n\u003cp\u003eAlways compare bolt specifications with your vehicle’s OEM requirements: thread size, seat style and shank length. Use the correct torque spec and a calibrated torque wrench to avoid over- or under-tightening; recheck torque after a short test drive.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm M12-1.25 thread pitch, conical seat, and 28mm shank length before purchase.\u003c\/li\u003e\n  \u003cli\u003eInstall with a 3\/4\" (19mm) socket and set to manufacturer torque values.\u003c\/li\u003e\n  \u003cli\u003eRe-torque after 50–100 miles (manufacturer guidance recommended).\u003c\/li\u003e\n  \u003cli\u003eDo not use on iron\/steel wheels or mismatched seat types.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These GAsupply lug bolts suit owners and mechanics who need a reliable, OEM-style replacement set for specific FCA aluminum wheels. They’re appropriate for those who prefer a one-piece bolt solution with improved corrosion resistance and slightly longer engagement than some stock bolts. If you’re unsure about fit, check your wheel seat type and thread specifications before ordering or consult a trusted wheel technician to confirm compatibility.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug bolts compatible with steel wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These are conical-seat bolts designed for aluminum wheels; steel wheels often use different seat types.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What thread and length do these bolts have?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are M12x1.25 thread, 28mm shank length (61mm overall), with a 3\/4\" (19mm) hex head.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55167711576407,"sku":"B0D25XQ3DB","price":64.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-front-packaging-lug-bolts.jpg?v=1790391605"},{"product_id":"gasupply-1-2-20-spline-lug-nuts-black-20pc-key-2-50mm-tall-conical-seat-steel","title":"GAsupply 1\/2-20 Spline Lug Nuts Black — 20pc + Key, 2\" (50mm) Tall Conical Seat, Steel","description":"\u003cp\u003e\u003cstrong\u003eGAsupply 1\/2-20 black spline lug nuts are a 20-piece set of 2\" (50mm) tall conical-seat, closed-end tuner lug nuts with a spline key, designed to replace 1\/2 x 20 wheel studs and enhance wheel security and appearance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts are engineered for wheels that use 1\/2-20 studs and a 60° conical (acorn) seat. Each nut is a single-piece steel construction finished in a durable black electrophoresis coating to resist rust and fading. The kit contains 20 lug nuts plus one spline key tool, packaged for convenient storage and transport. They fit performance and aftermarket wheels that accept conical-seat lug hardware and are sold for automotive enthusiasts, mechanics, and anyone replacing or upgrading their lug nuts.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my wheels and studs?\u003c\/h3\u003e\n\u003cp\u003eThey are compatible only with wheels that use 1\/2 x 20 threaded studs and a 60° conical (acorn) seat. Confirm your vehicle’s stud specification and seat type before purchase to ensure a correct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread size: 1\/2-20 (also shown as 1\/2 x 20 or 1\/2x20).\u003c\/li\u003e\n  \u003cli\u003eSeat type: 60° conical (acorn) seat — not for flat or mag seat wheels.\u003c\/li\u003e\n  \u003cli\u003eLength: 2 inches \/ 50 mm tall — accommodates deep wheels and tuner styles.\u003c\/li\u003e\n  \u003cli\u003eTool compatibility: uses included spline key; external hex sizes listed for removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and finish details?\u003c\/h3\u003e\n\u003cp\u003eEach lug nut is a solid one-piece steel design for consistent strength and simplified installation. The black finish is applied through electrophoresis for even coverage, improved corrosion resistance, and longer-lasting appearance compared with basic paint.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: high-quality steel, single-piece construction for durability.\u003c\/li\u003e\n  \u003cli\u003eFinish: black electrophoretic coating to resist rust and fading.\u003c\/li\u003e\n  \u003cli\u003eThreads: clean-cut, prepped for smooth engagement with studs.\u003c\/li\u003e\n  \u003cli\u003eStyle: long closed-end tuner lug nut — conceals inner threads and wheel studs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and remove these spline lug nuts?\u003c\/h3\u003e\n\u003cp\u003eInstallation uses the included spline key to drive the nuts; removal requires the same key or compatible tools noted below. Follow torque specs from your vehicle manufacturer and check that each nut seats fully against the conical surface to avoid wheel damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: one spline lug key designed to mate with the nut’s spline pattern.\u003c\/li\u003e\n  \u003cli\u003eAlternative tools: external hex sizes listed are 13\/16\" (21mm) and 7\/8\" (22mm) for compatible sockets.\u003c\/li\u003e\n  \u003cli\u003eInstallation tip: hand-thread first to avoid cross-threading, then torque to factory specifications.\u003c\/li\u003e\n  \u003cli\u003eRemoval tip: use the spline key; if damaged, use the external hex with caution and proper fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how is it stored?\u003c\/h3\u003e\n\u003cp\u003eThe set ships with twenty acorn-style spline lug nuts and one dedicated spline key tool, all housed in GAsupply branded packaging intended for storage and transport. The package is compact for garage shelves or toolboxes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContents: 20 lug nuts + 1 spline lug key tool included.\u003c\/li\u003e\n  \u003cli\u003ePackaging: premium GAsupply box for safe storage and portability.\u003c\/li\u003e\n  \u003cli\u003eUse case: ideal for replacing a full wheelset or keeping spares on hand.\u003c\/li\u003e\n  \u003cli\u003eService note: acorn seat design matches standard vehicle bolt profiles for proper seating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This lug nut set is designed for car owners, installers, and aftermarket wheel users who need 1\/2-20 threaded, 60° conical-seat lug nuts with a long closed-end style. It suits drivers upgrading wheel aesthetics, replacing worn hardware, or fitting tuner-style wheels that require taller, spline-keyed nuts. Confirm stud size and seat type before buying; this product is not universal and is specific to wheels compatible with 1\/2 x 20, conical-seat lug hardware.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these fit my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only if your vehicle uses 1\/2-20 studs with a 60° conical (acorn) seat. Check your wheel stud spec before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the spline key included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the set includes one spline lug key tool to install and remove the nuts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55167892062551,"sku":"B08KXL4L46","price":58.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-front-packaging-lug-nuts_ca43ecd6-d045-4430-b5a3-425022525b71.jpg?v=1790395393"},{"product_id":"gasupply-m14x1-5-extended-open-lug-nuts-20pc-black-1-9-tall-17mm-hex-60-cone-seat","title":"GAsupply M14x1.5 Extended Open Lug Nuts 20pc Black 1.9\" Tall 17mm Hex 60° Cone Seat","description":"\u003cstrong\u003eGAsupply M14x1.5 extended open lug nuts are a 20-piece set of 1.9\" tall, black 17mm-hex wheel nuts with a 60° conical seat and a matching key tool for wheels using 14×1.5 studs.\u003c\/strong\u003e\n\n\u003cp\u003eThese extended open-end lug nuts are designed to upgrade the look and restore secure fastening on vehicles that accept 14x1.5mm threads and 60° cone-seat hardware. Finished in a durable black electrophoresis coating, the nuts resist rust and maintain a refreshed appearance while offering straightforward installation thanks to cleanly cut threads. The kit arrives with a tuner socket key so you can fit and remove the nuts using standard tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lug nuts fit my wheels?\u003c\/h3\u003e\n\u003cp\u003eThey are specific to wheels and studs that use a 14×1.5mm thread pitch and a 60-degree conical (cone) seat. The extended open-end design and bulge-style body require that the wheel’s lug opening and stud length can accommodate taller nuts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread pitch: 14x1.5mm — confirm your vehicle’s studs match.\u003c\/li\u003e\n  \u003cli\u003eSeat type: 60° conical seat — must match wheel seat angle.\u003c\/li\u003e\n  \u003cli\u003eHeight: 1.9\" (48mm) — extended length for certain aftermarket wheels or aesthetic preference.\u003c\/li\u003e\n  \u003cli\u003eHex size: 17mm drive for installation; includes tuner socket key for 19mm and 21mm drivers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finish are used, and how do they perform?\u003c\/h3\u003e\n\u003cp\u003eThe nuts are manufactured from high-quality steel and finished with an electrophoresis coating that enhances corrosion resistance and color retention. The plating process produces a smooth, uniform black surface that resists chipping and fading when properly maintained.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: high-strength steel for reliable clamping force.\u003c\/li\u003e\n  \u003cli\u003eFinish: black electrophoresis coating for durability and rust protection.\u003c\/li\u003e\n  \u003cli\u003eThreads: cleanly cut and clear for easier hand-starting and torqueing.\u003c\/li\u003e\n  \u003cli\u003eDesign: bulge\/extended body for style and added engagement with tapered seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how do I install them correctly?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes twenty lug nuts plus one tuner-style lug nut key tool packaged for safe storage. Installation is simple when following standard lug nut torque procedures and confirming compatibility beforehand.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContents: 20 black extended lug nuts + 1 lug nut key tool.\u003c\/li\u003e\n  \u003cli\u003eTool compatibility: key accepts 3\/4\" (19mm) and 13\/16\" (21mm) driver sockets.\u003c\/li\u003e\n  \u003cli\u003eInstallation tip: hand-start on threads, then torque to your vehicle manufacturer’s spec using a calibrated torque wrench.\u003c\/li\u003e\n  \u003cli\u003eStorage: premium packaging keeps spare nuts and key organized.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This set is intended for drivers who need replacement or upgraded lug nuts for wheels with 14x1.5mm studs and 60° cone seats — especially owners of aftermarket wheels, tuners, or anyone seeking a sleek black finish. It’s ideal for DIY enthusiasts, mechanics, and automotive hobbyists who want a reliable, corrosion-resistant lug nut that’s straightforward to install using the supplied key. Always verify thread size and seat angle for a safe fit before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my car with 12x1.25 studs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These are 14x1.5mm thread lug nuts and will not fit 12x1.25 studs—verify your vehicle’s stud size first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do they include a key for removal?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The set includes one tuner-style lug nut key compatible with 3\/4\" and 13\/16\" driver sockets.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55168532054359,"sku":"B08XQC2MSS","price":67.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-front-packaging-m14x1.5-lug-nuts.jpg?v=1790407045"},{"product_id":"gasupply-1-2-20-extended-open-lug-nuts-black-1-9-20-piece-17mm-hex-60-cone-seat","title":"GAsupply 1\/2-20 Extended Open Lug Nuts Black 1.9\" 20‑Piece — 17mm Hex, 60° Cone Seat","description":"\u003cstrong\u003eGAsupply 1\/2-20 extended open lug nuts are a 20-piece black steel set with 1.9\" tall acorn-style bodies and a 60° cone seat, supplied with a matching tuner key.\u003c\/strong\u003e\n\n\u003cp\u003eThese extended open-end lug nuts are engineered to replace standard 1\/2\"-20 conical-seat nuts on compatible wheels and studs while giving your vehicle a cleaner, more finished look. Finished in a durable black electrophoretic coating, they resist corrosion and maintain appearance longer than untreated hardware. The package includes 20 lug nuts and a dedicated tuning key so you can install them right away.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my wheels and studs?\u003c\/h3\u003e\n\u003cp\u003eCheck that your wheel studs use a 1\/2-20 thread and that your wheels accept a 60° conical (cone) seat. These nuts are not universal; they are sized for 1\/2\"-20 threads and cone-seat wheels only. If your studs or wheel seat differ, they will not seat properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: 1\/2-20 (also written 1\/2 x 20)\u003c\/li\u003e\n  \u003cli\u003eSeat: 60° conical (cone) seat compatible with cone-seat wheels\u003c\/li\u003e\n  \u003cli\u003eHeight: 1.9\" (48 mm) extended open-end design\u003c\/li\u003e\n  \u003cli\u003eHex drive: 17 mm external hex for tightening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the finish and construction?\u003c\/h3\u003e\n\u003cp\u003eEach lug nut is formed from high-strength steel and coated via electrophoresis for a resistant black finish. This process creates a protective surface that stands up to road exposure, reducing rust and fading compared with plain metal. Threads are machine-cut and cleaned to ensure smooth installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: high-grade steel body for strength and impact resistance\u003c\/li\u003e\n  \u003cli\u003eCoating: electrophoretic black finish for corrosion protection\u003c\/li\u003e\n  \u003cli\u003eThreads: precise, clean-cut threads for reliable engagement\u003c\/li\u003e\n  \u003cli\u003eDesign: extended open acorn\/tuner body for aesthetic upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe set arrives with twenty lug nuts plus one tuner key sized to work with the nut design, packaged for neat storage. The included key accommodates common wrench sizes and makes quick hand or impact installation possible. Torque to your vehicle manufacturer’s recommended specification using the supplied driver or a torque wrench.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: 20 lug nuts + 1 lug nut key tool in portable packaging\u003c\/li\u003e\n  \u003cli\u003eKey sizes: designed to fit standard tuner wrench\/socket applications\u003c\/li\u003e\n  \u003cli\u003eInstallation: thread on by hand, then torque to spec with wrench\u003c\/li\u003e\n  \u003cli\u003eCompatibility note: intended for cone-seat wheels and 1\/2-20 studs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these change the look or clearance of my wheels?\u003c\/h3\u003e\n\u003cp\u003eThe extended open acorn profile adds a low-profile, tuner-style appearance and can fill exposed lug holes on many aftermarket and OEM wheels. At 1.9\" tall, they may protrude farther than factory nuts, so verify clearance behind wheel covers or center caps before final installation. They are designed to improve visual uniformity while staying functional.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAppearance: black acorn\/tuner style for a clean, uniform look\u003c\/li\u003e\n  \u003cli\u003eHeight impact: 1.9\" extension may affect recessed center caps\u003c\/li\u003e\n  \u003cli\u003eUse case: ideal for showing off wheel faces or aftermarket rims\u003c\/li\u003e\n  \u003cli\u003ePractical: maintains proper seat angle for safe mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: drivers upgrading their wheel hardware who need 1\/2-20 threaded, cone-seat lug nuts with an extended open acorn profile. It suits owners of aftermarket wheels, tuners, and anyone wanting a durable black finish and an included key for straightforward installation. If your vehicle uses a different thread pitch or seat type, choose a product matched to those specifications instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts compatible with spline-style or spherical-seat wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These are made for 60° conical (cone) seat wheels and 1\/2-20 studs only, not spline or ball-seat types.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include a key for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The set contains one tuner-style lug nut key sized to fit the included nuts for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55168742883671,"sku":"B08XQCQS28","price":64.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-front-packaging-lug-nuts_1e1620ce-91ef-4a47-9a6a-c533b1fd6b5c.jpg?v=1790412951"},{"product_id":"gasupply-m12x1-25-oem-lug-bolts-black-20pcs-28mm-shank-3-4-hex-cone-seat","title":"GAsupply M12x1.25 OEM Lug Bolts Black 20pcs — 28mm Shank, 3\/4\" Hex, Cone Seat","description":"\u003cp\u003e\u003cstrong\u003eGAsupply M12x1.25 OEM Lug Bolt Black is a 20-piece set of one-piece, cone-seat wheel bolts designed to replace factory bolts on compatible Jeep, Chrysler and Dodge aluminum wheels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug bolts are built to OEM dimensions with an M12x1.25 thread, a 28mm shank (thread) length and a 3\/4\" (19mm) hex head. Finished in a multi-layer black coating and protected with anti-rust oil, the bolts are manufactured from high-strength steel and tested for corrosion resistance. The set replaces two-piece factory bolts with a single-piece design to reduce expansion or cracking under load while offering slightly longer length and more teeth engagement for added security.\u003c\/p\u003e\n\n\u003ch3\u003eWill these bolts fit my vehicle and wheels?\u003c\/h3\u003e\n\n\u003cp\u003eFitment depends on year, model and wheel seat type. These bolts are intended for specific Jeep, Chrysler and Dodge models with conical (cone) seat aluminum wheels; they will not fit iron wheels or wheels with different seat geometry.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThread: M12-1.25; bolt overall length: 61mm (2.4\"); shank length: 28mm.\u003c\/li\u003e\n  \u003cli\u003eSeat style: cone (conical) seat — ensure your wheel uses cone seat lug bolts.\u003c\/li\u003e\n  \u003cli\u003eReported compatibility: 2014+ Jeep Cherokee, 2018+ Jeep Compass, 2015+ Renegade, 2015–2017 Chrysler 200, 2013–2016 Dodge Dart (aluminum wheels only).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these one-piece bolts compare with the original two-piece design?\u003c\/h3\u003e\n\n\u003cp\u003eOne-piece bolts remove the separate sleeve or insert found in two-piece designs, reducing the risk of parts loosening, expanding or cracking over time. The monolithic construction increases durability under repetitive torque and road stress.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSingle-piece steel construction for improved structural integrity.\u003c\/li\u003e\n  \u003cli\u003eLonger thread engagement compared with some OEM bolts for extra teeth contact.\u003c\/li\u003e\n  \u003cli\u003eReduced failure points compared with two-piece designs, improving reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protective finish and durability features do these bolts offer?\u003c\/h3\u003e\n\n\u003cp\u003eGAsupply lug bolts receive a four-layer plating process followed by a 72-hour salt spray test and an application of anti-rust oil. This combination reduces surface corrosion and preserves the black finish under common road conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFour-layer plating for adhesion and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003e72-hour salt spray tested to simulate harsh environments.\u003c\/li\u003e\n  \u003cli\u003eAnti-rust oil applied to slow oxidation and color fade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I verify these bolts are right before purchasing?\u003c\/h3\u003e\n\n\u003cp\u003eDouble-check the bolt thread size, seat type and shank length against your vehicle and wheels. Because bolt specifications can vary across years and wheel materials, measuring existing bolts or consulting your wheel manufacturer helps ensure correct fitment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConfirm thread pitch: M12 x 1.25.\u003c\/li\u003e\n  \u003cli\u003eVerify seat geometry: conical cone seat required.\u003c\/li\u003e\n  \u003cli\u003eCompare shank length (28mm) and overall bolt length (61mm) to existing bolts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These GAsupply lug bolts are aimed at owners of compatible Jeep, Chrysler and Dodge vehicles who need a complete 20-piece replacement set for aluminum, cone-seat wheels. They suit DIY mechanics, repair shops and fleet managers who want a durable, OEM-style one-piece bolt with added corrosion protection and slightly extended thread engagement for a secure fit. Not recommended for iron wheels or wheels with a different lug seat style.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug bolts compatible with iron wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These bolts are specified for aluminum wheels with conical seats and are not compatible with iron wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these bolts use M12x1.25 thread pitch?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The bolts use an M12‑1.25 thread pitch with a 28mm shank and 61mm total length.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55168874578263,"sku":"B0D6W1K3FB","price":69.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-front-view-20pcs-lug-bolts.jpg?v=1790415270"},{"product_id":"gasupply-atv-wheel-spacers-4x110-2-in-50mm-74mm-hub-bore-2-pack-cnc-6061-t6-aluminum-with-grade-12-9-studs","title":"GAsupply ATV Wheel Spacers 4x110 — 2 in (50mm) 74mm Hub Bore 2‑Pack, CNC 6061‑T6 Aluminium with Grade 12.9 Studs","description":"\u003cp\u003e\u003cstrong\u003eThis GAsupply 2-inch (50mm) pair of 4x110 ATV wheel spacers widens track width while retaining a 74mm hub bore and using M10×1.25 studs for a secure, CNC-machined aluminum fit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese wheel spacers are crafted for ATVs that use a 4×110 bolt pattern and a hub bore no larger than 74mm. Each spacer is 50mm thick, made from 6061-T6 aluminum billet, anodized for corrosion resistance, and supplied with Grade 12.9 studs and bolts. Sold as a two-pack, they’re designed to keep installation straightforward while increasing tire clearance and stance.\u003c\/p\u003e\n\n\u003ch3\u003eWill these spacers fit my ATV wheels and hub?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on three measurements: bolt pattern, hub bore, and stud pitch. These spacers require a 4×110 bolt pattern, a hub bore ≤74mm, and wheel studs with a 10×1.25 thread pitch.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt pattern: 4x110 mm only\u003c\/li\u003e\n  \u003cli\u003eHub bore tolerance: up to 74 mm\u003c\/li\u003e\n  \u003cli\u003eStud\/thread requirement: M10×1.25 (not compatible with 12×1.25)\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle year\/model fit listings before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these spacers made and how durable are they?\u003c\/h3\u003e\n\u003cp\u003eGAsupply spacers are CNC-machined from 6061-T6 aluminum billet for consistent dimensions and lighter weight compared with steel. Each spacer is anodized to resist corrosion and is supplied with Grade 12.9 hardware for high clamping strength.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: 6061-T6 aluminum billet\u003c\/li\u003e\n  \u003cli\u003eFinish: anodized surface for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eHardware: pre-installed Grade 12.9 bolts\u003c\/li\u003e\n  \u003cli\u003eThickness: 50 mm (2 inches) per spacer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance or fit changes should I expect after installation?\u003c\/h3\u003e\n\u003cp\u003eInstalling these spacers increases track width and moves wheels outward two inches per side when both sides are fitted. That can improve tire clearance for larger tires, alter vehicle stance, and change handling characteristics—so check wheel clearance and suspension geometry after fitting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrack width increase: 2 inches per wheel spacer thickness\u003c\/li\u003e\n  \u003cli\u003eAllows wider or larger tires with improved clearance\u003c\/li\u003e\n  \u003cli\u003eMore aggressive visual stance for off-road use\u003c\/li\u003e\n  \u003cli\u003eVerify brake, fender, and suspension clearances post-install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and safety?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires correct torque specs and matching stud\/thread dimensions. Because wheel spacers change wheel position, follow vehicle manufacturer guidelines and re-torque wheel studs after initial miles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse M10×1.25 wheels only—do not use with 12×1.25 studs\u003c\/li\u003e\n  \u003cli\u003eTighten to manufacturer-recommended torque values\u003c\/li\u003e\n  \u003cli\u003eRe-check torque after first 50–100 miles of driving\u003c\/li\u003e\n  \u003cli\u003eInspect spacers and hardware periodically for wear\/corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders who need to fit wider or higher-traction tires, want a wider stance for improved stability or appearance, and whose ATV hub and wheel specifications match 4×110 bolt pattern, ≤74mm center bore, and M10×1.25 studs. These spacers are aimed at users comfortable verifying fitment and following torque and installation best practices.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these spacers fit any 4-lug ATV?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit only 4×110 bolt pattern hubs with a center bore ≤74mm and wheel studs of M10×1.25.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the studs included and what grade are they?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the spacers include pre-installed Grade 12.9 studs and bolts designed for high clamping strength.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55170343829847,"sku":"B09TVTF9RB","price":95.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-front-view-packaged-spacers.jpg?v=1790428278"},{"product_id":"gasupply-atv-wheel-spacers-4x110-2-in-50mm-74mm-hub-bore-4-pack-cnc-aluminum-with-grade-12-9-bolts","title":"GAsupply ATV Wheel Spacers 4x110 — 2 in (50mm) 74mm Hub Bore 4‑Pack CNC Aluminium with Grade 12.9 Bolts","description":"\u003cp\u003e\u003cstrong\u003eGAsupply 4x110 ATV wheel spacers are precision CNC-machined 2-inch (50mm) adapters with a 74mm hub bore and M10x1.25 studs, sold as a 4-piece kit to increase tire clearance and stance on compatible 4‑lug ATVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese spacers convert a 4×110 bolt pattern to the same 4×110 pitch while moving the wheel outward by 50mm. Made from 6061-T6 aluminum and anodized for corrosion resistance, each spacer arrives pre-fitted with high-strength Grade 12.9 bolts for reliable clamping. They are intended for wheel assemblies that have a center bore no larger than 74mm and wheel studs sized 10×1.25 (do not fit 12×1.25 studs).\u003c\/p\u003e\n\n\u003ch3\u003eWill these spacers fit my ATV?\u003c\/h3\u003e\n\u003cp\u003eCheck three critical measurements: bolt pattern, hub bore, and stud thread pitch. If your vehicle uses a 4×110 bolt pattern, a hub bore ≤74mm, and M10×1.25 studs, these spacers will install correctly. They are not universal—confirm details before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt pattern: 4×110mm (4×4.3\")\u003c\/li\u003e\n  \u003cli\u003eHub bore limit: 74mm (2.9\")\u003c\/li\u003e\n  \u003cli\u003eStud\/thread pitch: M10×1.25 (not 12×1.25)\u003c\/li\u003e\n  \u003cli\u003eSpacer thickness: 50mm (2.0\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these spacers affect ride and tire options?\u003c\/h3\u003e\n\u003cp\u003eMoving the wheel outward by 2 inches increases track width and creates extra clearance between the tire and suspension, frame, or brake components. That extra room allows fitting wider or taller tires and can improve stability when corners are pushed, while also changing the vehicle's visual stance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAllows installation of wider or larger-diameter tires\u003c\/li\u003e\n  \u003cli\u003eReduces rubbing on control arms and fenders\u003c\/li\u003e\n  \u003cli\u003eWidens track for a more aggressive stance and handling stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and hardware are used for durability?\u003c\/h3\u003e\n\u003cp\u003eGAsupply spacers are CNC machined from aircraft-grade 6061-T6 aluminum for a balance of strength and light weight, then anodized to resist corrosion and fading. Each kit includes pre-installed Grade 12.9 bolts, providing high tensile strength where wheel clamping loads are concentrated.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061-T6 billet aluminum construction\u003c\/li\u003e\n  \u003cli\u003eProtective anodized finish\u003c\/li\u003e\n  \u003cli\u003eGrade 12.9 wheel bolts pre-installed for secure fastening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install them and what should I watch for?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for mechanically proficient users: position the spacer on the hub, thread the vehicle’s wheel onto the spacer studs, torque to manufacturer specs, and re-check torque after a short test drive. Verify wheel stud fit and hub centering; never use spacers on incompatible stud sizes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall onto hub, mount wheel, torque lug nuts to spec\u003c\/li\u003e\n  \u003cli\u003eConfirm center bore ≤74mm for proper hub centering\u003c\/li\u003e\n  \u003cli\u003eRe-torque lug nuts after initial miles of driving\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 12×1.25 stud wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? GAsupply 4x110 2\" spacers suit ATV owners who need more tire clearance, want to fit wider or higher-traction tires, or prefer a wider stance for appearance and handling. They are best for riders who can verify bolt pattern, hub bore, and stud pitch ahead of purchase, and who perform or supervise proper installation and torque procedures. These spacers are designed for use on compatible 4‑lug ATVs and are not a universal fit; consult vehicle specifications before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these spacers fit a 4x110 bolt pattern?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these spacers are made for a 4×110 bolt pattern with a hub bore up to 74mm and M10×1.25 studs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these spacers with 12×1.25 studs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—these spacers accept M10×1.25 studs only and will not fit wheels with 12×1.25 studs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55171142386007,"sku":"B08MPRRXF5","price":151.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-front-view-packaged-spacers_27c014d2-c39d-4939-8c8b-59b659edba32.jpg?v=1790439044"},{"product_id":"gasupply-spike-lug-nuts-1-2-20-chrome-20pc-4-4-solid-spline-60-conical-seat","title":"GAsupply Spike Lug Nuts 1\/2-20 Chrome 20pc — 4.4\" Solid Spline, 60° Conical Seat","description":"\u003cp\u003e\u003cstrong\u003eGAsupply 1\/2-20 Spike Lug Nuts are a set of 20 chrome, solid one-piece spline lug nuts with a 4.4\" overall length and 60° conical seat for vehicles using 1\/2\"-20 wheel studs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts combine an aggressive spike aesthetic with heavy-duty construction designed for vehicles that accept conical (cone) seating and 1\/2\"-20 wheel studs. Finished in chrome and delivered as a matched set with a long spline socket key, they aim to give wheels a bold look while resisting corrosion through plating, a 72-hour salt-spray tested finish, and anti-rust oil. The closed-end, solid design reduces the number of stress points compared with multi-piece alternatives.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these spike lug nuts install on my wheels?\u003c\/h3\u003e\n\u003cp\u003eInstallation is the same as standard lug nuts when your wheels use a 60° conical seat and 1\/2\"-20 studs. Hand-start each nut, then use the included long spline socket key to torque them in a crisscross pattern to the vehicle manufacturer's specified torque.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread size: 1\/2\"-20 standard threads for compatible studs\u003c\/li\u003e\n  \u003cli\u003eSeat type: 60° conical (cone) only — not for flat or mag seats\u003c\/li\u003e\n  \u003cli\u003eTool included: long spline socket key for reach and clearance\u003c\/li\u003e\n  \u003cli\u003eTorque: follow vehicle factory torque specs; tighten in star pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the dimensions and technical specs?\u003c\/h3\u003e\n\u003cp\u003eEach lug nut measures approximately 4.4 inches (112 mm) overall with a 0.9\" (23 mm) hex width at the base for seating. They are closed-end, spline-style nuts finished in chrome and designed as a one-piece solid construction to increase strength.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall length: 4.4\" \/ 112 mm\u003c\/li\u003e\n  \u003cli\u003eWidth at base: 0.9\" \/ 23 mm\u003c\/li\u003e\n  \u003cli\u003eSeat angle: 60° conical\u003c\/li\u003e\n  \u003cli\u003eDesign: spline, closed-end, solid one-piece spike lug nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these lug nuts durable and corrosion-resistant?\u003c\/h3\u003e\n\u003cp\u003eThe nuts are manufactured from high-grade steel, plated for a chrome appearance, and subjected to a 72-hour salt spray test to evaluate corrosion resistance. After plating they receive anti-rust oil treatment to further protect the surface, though regular cleaning and inspection prolong life on road-exposed vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: high-quality steel with chrome plating\u003c\/li\u003e\n  \u003cli\u003eCorrosion testing: 72-hour salt spray test\u003c\/li\u003e\n  \u003cli\u003ePost-plating protection: anti-rust oil applied\u003c\/li\u003e\n  \u003cli\u003eConstruction: solid one-piece to reduce cracking and failure risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? GAsupply 1\/2-20 Spike Lug Nuts suit drivers and wheel enthusiasts who want an aggressive, polished look with heavy-duty hardware for vehicles that specifically use 1\/2\"-20 wheel studs and conical seats. They are a fit for custom street trucks, SUVs, and cars with aftermarket wheels that accept 60° cone nuts and for installers who prefer a single-piece, closed-end lug nut with a long spline key included. If you are unsure whether these nuts work with your wheel type, measure your stud and seat or contact GAsupply for fitment guidance before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit only wheels with a 60° conical seat and 1\/2\"-20 studs. Measure your stud and seat or check your wheel specs before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the set include a tool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the package includes one long spline socket key sized to reach and tighten these 4.4\" lug nuts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":55171575054679,"sku":"B0DN643N44","price":83.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gasupply-spike-lug-nuts-front-packaging.jpg?v=1790448362"}],"url":"https:\/\/britishgarage.co.uk\/collections\/gasupply.oembed","provider":"British Garage","version":"1.0","type":"link"}