{"title":"HIAORS","description":"\u003cp\u003eBrowse 31 HIAORS products at British Garage, including motorcycle \u0026amp; atv parts. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked UK delivery on every order and 30-day returns.\u003c\/p\u003e","products":[{"product_id":"hiaors-pz20-carburetor-kit-for-50-125cc-atvs-go-karts-20mm-intake-35mm-air-filter-ready-to-install","title":"HIAORS PZ20 Carburetor Kit for 50–125cc ATVs \u0026 Go-Karts — 20mm Intake, 35mm Air Filter, Ready-to-Install","description":"\u003cp\u003e\u003cstrong\u003eHIAORS PZ20 carburetor kit is a complete replacement carburetor assembly designed to fit most 50–125cc Chinese-made 4-stroke ATVs, pit bikes and go-karts, improving airflow and offering fuel-saving performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re repairing a TaoTao, Coolster, Baja or Loncin-powered mini ATV or upgrading a small 4-stroke engine, the HIAORS PZ20 arrives as a ready-to-install kit. It includes the PZ20 carburetor plus gaskets, fuel line, clamps, twin fuel filters and a 35mm air filter so you can swap components quickly and get back on the trail. Key dimensions (20mm intake, 48mm mounting center-to-center, 35mm air filter inner diameter) match a wide range of popular Chinese models.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this carburetor affect engine performance?\u003c\/h3\u003e\n\u003cp\u003eThe PZ20 balances airflow and fuel delivery for smoother throttle response compared with smaller PZ19 units, while using less fuel than some larger PZ22 types. It improves mixture consistency, which helps maintain steady idling and more predictable acceleration under load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBetter air-fuel mix for smoother throttle transitions\u003c\/li\u003e\n\u003cli\u003e35mm air filter reduces dust and prolongs engine life\u003c\/li\u003e\n\u003cli\u003eDesigned to improve fuel economy versus larger carb sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles will this kit fit and what are the exact dimensions?\u003c\/h3\u003e\n\u003cp\u003eThis carburetor targets many Chinese 4-stroke mini ATVs, pit bikes and go-karts in the 50–125cc range. It fits numerous models from TaoTao, Coolster, SunL, Kazuma, Roketa, Baja, Loncin, Lifan and similar brands.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntake inner diameter: 20mm\u003c\/li\u003e\n\u003cli\u003eMounting center-to-center: 48mm\u003c\/li\u003e\n\u003cli\u003eAir filter inner diameter: 35mm, included red foam filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the HIAORS PZ20 kit and is it ready to install?\u003c\/h3\u003e\n\u003cp\u003eThe package is a full replacement kit with the parts needed for a straightforward swap. You get the carburetor and all basic consumables to make installation quick without sourcing extra parts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x PZ20 carburetor\u003c\/li\u003e\n\u003cli\u003e2 x red inline fuel filters, 2 x mounting gaskets\u003c\/li\u003e\n\u003cli\u003e1 x 35mm red air filter, 1 x fuel line and 4 x clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I maintain the carburetor to keep it working well?\u003c\/h3\u003e\n\u003cp\u003eRoutine care includes keeping the air filter clean, replacing the small fuel filters regularly and draining old fuel before storage. Periodic inspection of gaskets and clamps prevents leaks and ensures long-term reliability.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRinse and lightly oil the foam air filter every few rides\u003c\/li\u003e\n\u003cli\u003eReplace inline fuel filters yearly or when contaminated\u003c\/li\u003e\n\u003cli\u003eCheck clamps and gaskets for secure, leak-free seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The HIAORS PZ20 carburetor kit is aimed at owners and mechanics of mini ATVs, pit bikes and go-karts with 50–125cc Chinese 4-stroke engines who need a dependable, easy-to-install replacement that improves throttle response and fuel efficiency. It suits DIY riders repairing TaoTao, Coolster, Baja, Loncin, Lifan and similar models, as well as small shops servicing recreational off-road machines.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this PZ20 fit my 110cc TaoTao ATV?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the PZ20 fits many TaoTao 110cc and 125cc models with 48mm center-to-center mounts and a 20mm intake.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include an air filter and fuel line?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it includes a 35mm red foam air filter, fuel line, two fuel filters, gaskets and four clamps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55161010225495,"sku":"B0894MFFKD","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-pz20-front-angle-carburetor.jpg?v=1790320731"},{"product_id":"hiaors-pz19-19mm-carburetor-for-50-125cc-atvs-pit-bikes-cable-choke-adjustable-idle-mixture","title":"HIAORS PZ19 19mm Carburetor for 50–125cc ATVs \u0026 Pit Bikes — Cable Choke, Adjustable Idle \u0026 Mixture","description":"\u003cp\u003e\u003cstrong\u003eHIAORS PZ19 is a 19mm cable-choke carburetor designed to replace stock carbs on many 50cc–125cc 4-stroke ATVs and pit bikes, offering adjustable air-fuel tuning and straightforward bolt-on installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your small-displacement ATV, quad, or dirt bike is running lean, idling poorly, or you need a reliable aftermarket carb for maintenance or performance tuning, this PZ19 unit is a widely compatible option. Built with standard 19mm intake sizing and a cable-actuated choke, it fits a long list of models from TaoTao, Coolster, Apollo, Baja, Sunl, Lifan and several pit bike brands. The design prioritizes simple fitment, user-adjustable idle and mixture, and improved fuel metering compared with larger PZ22-style carbs for these engines.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines will this HIAORS PZ19 carburetor fit?\u003c\/h3\u003e\n\u003cp\u003eThe PZ19 is intended for many 50cc–125cc 4-stroke ATVs, quads and pit bikes that use a 19mm intake and standard mounting pattern. It’s commonly used as a replacement on TaoTao DB-series and ATA models, Coolster 110\/125, Apollo Blazer 125, Baja BA49 and similar bikes and quads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntake diameter: 19mm (0.75\").\u003c\/li\u003e\n  \u003cli\u003eBolt hole spacing: 48mm (center to center).\u003c\/li\u003e\n  \u003cli\u003eListed compatible brands: TaoTao, Coolster, Apollo, Baja, Sunl, Lifan, Roketa, SSR, X-motos and more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the cable choke and adjustability help performance?\u003c\/h3\u003e\n\u003cp\u003eThe cable-actuated choke gives reliable cold-start enrichment without fumbling with a manual flip. You can fine-tune idle speed and the air-fuel mixture using the built-in adjustment screws so the engine runs smoothly across conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCable choke: easier, more precise cold starts.\u003c\/li\u003e\n  \u003cli\u003eIdle screw: quick idle RPM tuning after installation.\u003c\/li\u003e\n  \u003cli\u003eAir\/fuel mixture screw: helps correct lean\/rich conditions for better throttle response.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical specs and build details I should check before buying?\u003c\/h3\u003e\n\u003cp\u003eConfirming physical dimensions prevents fitment issues. The carb features a 19mm bore and 48mm mounting-hole center-to-center spacing; it’s built from durable materials intended for routine replacement and maintenance use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDiameter: 19mm intake (0.75\").\u003c\/li\u003e\n  \u003cli\u003eMount spacing: 48mm center-to-center.\u003c\/li\u003e\n  \u003cli\u003eConstruction: metal body with standard fittings for fuel line and throttle cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what should I expect during setup?\u003c\/h3\u003e\n\u003cp\u003eInstallation is generally straightforward for someone comfortable with basic small-engine work. Remove the old carb, match the flange and intake size, hook up the fuel and throttle\/cable choke, then set idle and mixture for best running. Expect to make minor jet or needle adjustments based on altitude and fuel quality.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical steps: remove old carb, mount new unit, connect fuel and cable choke, adjust idle.\u003c\/li\u003e\n  \u003cli\u003eTip: verify gasket alignment and tighten bolts evenly to avoid leaks.\u003c\/li\u003e\n  \u003cli\u003eAdjustment: finalize air-fuel and idle after a warm-up ride.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Riders and mechanics who need a cost-effective, widely compatible replacement carburetor for 50cc–125cc 4-stroke ATVs, quads and pit bikes. It’s geared toward owners of TaoTao, Coolster, Apollo, Baja and similar machines who want straightforward installation, basic tunability, and a reliable cable-choke mechanism without buying a full OEM assembly. If you need precise dyno-level tuning or a larger bore for performance beyond the engine’s stock configuration, consider consulting a specialist before swapping jets or needles.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this PZ19 fit my 110cc TaoTao ATV?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most TaoTao 110cc models use a 19mm intake and 48mm mount spacing, so the PZ19 is typically compatible—confirm the intake diameter and bolt hole centers first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the carburetor include jets or require further tuning?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It ships as a standard PZ19 with basic jets; you may need to adjust jets or needle position for altitude or fuel differences.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55161011175767,"sku":"B07K9VJFJM","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-pz19-front-view-carburetor.jpg?v=1790320774"},{"product_id":"hiaors-mini-bike-throttle-assembly-7-8-inch-red-twist-grip-with-50-inch-cable-kill-switch","title":"HIAORS Mini Bike Throttle Assembly 7\/8-inch, Red Twist Grip with 50-inch Cable \u0026 Kill Switch","description":"\u003cp\u003e\u003cstrong\u003eHIAORS mini bike throttle cable and grip kit is a complete 7\/8\" handlebar throttle assembly that replaces worn controls on minibikes, pit bikes and small 4-stroke motorcycles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit delivers a ready-to-install throttle, twist grip, housing, kill switch and a 50-inch cable designed to match the 7\/8\" handlebars found on many minibike models — including Coleman CT200U, BT200X and machines powered by Predator clone engines. It ships with mounting hardware and simple accessories so you can restore throttle response and handlebar ergonomics without hunting for separate parts.\u003c\/p\u003e\n\n\u003ch3\u003eWill this throttle kit fit my minibike or pit bike?\u003c\/h3\u003e\n\u003cp\u003eIf your bike uses a 7\/8\" (22mm) handlebar and a single cable throttle layout, this HIAORS assembly is designed to fit. The package includes a 50-inch total cable with a 45-inch outer conduit, which accommodates most small-frame bikes and many clones of common 4-stroke engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Coleman CT200U, CT200U-EX, BT200X and similar models.\u003c\/li\u003e\n  \u003cli\u003eWorks with many Predator 79–224cc clone engines (5.5–6.5hp range).\u003c\/li\u003e\n  \u003cli\u003eDesigned for 50–125cc style minibikes, ATVs and small dirt bikes.\u003c\/li\u003e\n  \u003cli\u003eCheck handlebar diameter (7\/8\") and cable routing before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what comes in the box?\u003c\/h3\u003e\n\u003cp\u003eThe kit is intended for straightforward bolt-on replacement — basic tools are enough to remove an old grip and clamp on the new assembly. HIAORS bundles a twist throttle, textured grip, red throttle cable, kill switch, housing clamp, small wrench, cable ties and a cruise-assist piece so you won’t need extra parts for a standard install.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes throttle grip, twist housing, and cable pre-measured to 50 inches.\u003c\/li\u003e\n  \u003cli\u003eKill switch and clamp are supplied for safe, tidy mounting.\u003c\/li\u003e\n  \u003cli\u003eSmall wrench and cable ties are included to simplify assembly.\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle-specific routing and fastener torque recommendations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance or durability should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe cable and grip are made to withstand typical off-road and recreational use on small-engine bikes. While not a high-end racing race part, this kit offers reliable daily performance and improved hand feel compared with older or damaged stock components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTextured grip improves control during rides and light off-road use.\u003c\/li\u003e\n  \u003cli\u003e50-inch cable length fits most small-bike frame layouts without modification.\u003c\/li\u003e\n  \u003cli\u003eDurable outer conduit protects the inner cable from dirt and abrasion.\u003c\/li\u003e\n  \u003cli\u003eRegular lubrication and inspection extend service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders or mechanics who need a cost-effective, complete replacement throttle for 7\/8\" minibikes, pit bikes or light off-road motorcycles will find this HIAORS kit useful. It’s aimed at owners of Coleman CT200 series machines, clones using Predator-style engines, and a wide range of 50–125cc small-frame bikes who want an easy, parts-included swap to restore throttle function and improve grip comfort.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit Coleman CT200U minibikes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the HIAORS 7\/8\" throttle assembly is listed compatible with Coleman CT200U and CT200U-EX models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the cable length included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The total cable is 50 inches with a 45-inch outer conduit, suited for most small-bike layouts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55161064816983,"sku":"B0D73NTNJM","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-front-assembly-grip-and-housing.jpg?v=1790321627"},{"product_id":"hiaors-13mm-2-stroke-carburetor-for-43-50cc-mini-dirt-bikes-atvs-38mm-mount-direct-fit","title":"HIAORS 13mm 2-Stroke Carburetor for 43–50cc Mini Dirt Bikes \u0026 ATVs — 38mm Mount, Direct-Fit","description":"\u003cp\u003e\u003cstrong\u003eHIAORS 13mm 2-stroke carburetor is a direct-fit replacement carb designed to restore smooth starting, steady idle and responsive throttle on 43–50cc mini dirt bikes, ATVs, pocket bikes and scooters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact carburetor is built for small two-stroke engines and engineered to match the intake and mounting dimensions commonly found on SYX Moto, SSR, Coolster and many other Chinese-brand 50cc machines. With a 13mm intake bore and 38mm mounting center distance, it replaces worn or clogged stock carbs to improve fuel-air metering, reduce stalling and sharpen low-end throttle response without major modifications.\u003c\/p\u003e\n\n\u003ch3\u003eWill this HIAORS carburetor fit my 50cc mini bike or pocket quad?\u003c\/h3\u003e\n\u003cp\u003eFitment is based on intake diameter and mounting hole spacing rather than brand alone. If your engine uses a 13mm (0.51 inch) intake and the mounting centers measure about 38mm (1.5 inch), this carb is likely compatible. Many popular models from SYX Moto, SSR, Coolster, X-Pro and others share these dimensions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntake inner diameter: 13mm (0.51 inch) for direct fit to manifold boots\u003c\/li\u003e\n  \u003cli\u003eMounting center-to-center distance: 38mm (1.5 inch)\u003c\/li\u003e\n  \u003cli\u003eCommon applications: 43cc–50cc 2-stroke mini dirt bikes, ATVs, pocket bikes, choppers and scooters\u003c\/li\u003e\n  \u003cli\u003eCheck your machine’s carb flange and boot size before ordering to ensure compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this carburetor improve engine performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or gummed carburetor restores correct fuel and air delivery to the cylinder, which helps your engine start easier, idle more stably and accelerate more predictably. The precision-machined passages and needle assembly provide crisper throttle transitions and reduce the chance of flooding when tuned correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores reliable cold and warm starts by renewing fuel flow control\u003c\/li\u003e\n  \u003cli\u003eSmoother, steadier idle thanks to cleaner jets and passage geometry\u003c\/li\u003e\n  \u003cli\u003eImproved throttle response from a well-sealed slide and needle setup\u003c\/li\u003e\n  \u003cli\u003eReduces sputtering and hesitation caused by clogged or degraded stock carbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and serviceable features?\u003c\/h3\u003e\n\u003cp\u003eHIAORS manufactures this 2-stroke carb from durable materials to withstand everyday off-road use. The design includes user-serviceable items—jets, needle and float bowl—that can be cleaned, inspected or replaced to maintain performance over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable alloy body and stainless hardware for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eRemovable float bowl and accessible main\/idle jets for cleaning or rejetting\u003c\/li\u003e\n  \u003cli\u003ePrecision tolerances for consistent fuel-air metering and reduced leakage\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard carb tools and replacement parts used on small 2-stroke engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and tune this replacement carburetor?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for mechanically minded riders: match the intake and mount dimensions, swap the carb and reconnect throttle and fuel lines. After installation, basic tuning—adjusting idle screw, fuel mixture and possibly rejetting—ensures optimal running with your specific airbox, exhaust and altitude.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify intake boot and mounting hole alignment before tightening clamps\u003c\/li\u003e\n  \u003cli\u003eReconnect throttle cable with correct freeplay and test slide operation\u003c\/li\u003e\n  \u003cli\u003eStart with stock jetting, then fine-tune idle and air-fuel mixture for your setup\u003c\/li\u003e\n  \u003cli\u003eConsider rejetting for aftermarket exhausts, air filters or high-altitude riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The HIAORS 13mm 2-stroke carburetor is aimed at owners and mechanics of 43–50cc mini dirt bikes, kids’ quads, pocket bikes and scooters who need a reliable, serviceable replacement for a failing carb. It’s suitable for riders restoring an older machine, shops stocking common parts for Chinese-brand small motorcycles, and DIY tuners wanting a straightforward swap to regain consistent starting, idling and throttle response.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carb fit my SYX Moto 50cc?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your SYX Moto uses a 13mm intake and 38mm mounting centers, this HIAORS carb should fit as a direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I rejet this carb for different performance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The float bowl and jets are serviceable so you can rejet for aftermarket filters, exhausts, or altitude changes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55161617744215,"sku":"B07BS7PSFN","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-front-view-carburetor.jpg?v=1790330298"},{"product_id":"hiaors-ignition-coil-a7tc-spark-plug-kit-for-50-125cc-chinese-atvs-horizontal-4-stroke-thick-copper-windings","title":"HIAORS Ignition Coil \u0026 A7TC Spark Plug Kit for 50-125cc Chinese ATVs - Horizontal 4-Stroke, Thick Copper Windings","description":"\u003cp\u003e\u003cstrong\u003eHIAORS ignition coil and A7TC spark plug kit replaces worn ignition components on 50–125cc Chinese 4-stroke ATVs and pit bikes to restore consistent spark and smoother starts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement ignition coil paired with an A7TC spark plug is designed specifically for many popular Chinese small-displacement off-road machines. Intended for horizontal 4-stroke engines from brands like Taotao, Coolster, Kazuma, Baja, Lifan, Apollo and others, the module steps up 12V input into the high voltage needed for reliable combustion. The assembly is built to resist vibration and rough terrain, and uses thicker copper windings plus a three-electrode spark plug for improved conductivity and spark stability.\u003c\/p\u003e\n\n\u003ch3\u003eWhich models and engine types does this kit work with?\u003c\/h3\u003e\n\u003cp\u003eThe HIAORS kit fits a wide range of 50cc–125cc Chinese ATVs, quads and pit bikes that use a horizontal 4-stroke ignition system. It is not compatible with GY6 or CG-style engines, so confirming your engine type before ordering is important.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible examples: Taotao, Coolster, Kazuma Falcon\/Meerkat, Roketa, Baja, Lifan, Sunl, Buyang, Apollo dirt\/pit bikes.\u003c\/li\u003e\n  \u003cli\u003eSpecific Taotao\/Coolster model ranges including ATA series and 3050\/3125 families.\u003c\/li\u003e\n  \u003cli\u003eFits 50cc, 70cc, 90cc, 110cc and 125cc 4-stroke horizontal engines listed by manufacturers.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for GY6 or CG engine families—verify physical dimensions and connector style.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the upgraded coil and A7TC spark plug improve engine performance?\u003c\/h3\u003e\n\u003cp\u003eThe ignition coil uses thicker copper windings for better electrical conductivity and more stable output, while the three-electrode A7TC spark plug creates a dependable, concentrated spark. Together they support more complete fuel combustion and more predictable ignition times under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThicker copper wire reduces resistance and delivers steadier voltage to the plug.\u003c\/li\u003e\n  \u003cli\u003e3-electrode plug design increases spark reliability across conditions.\u003c\/li\u003e\n  \u003cli\u003eImproved spark can reduce misfires and aid smoother acceleration.\u003c\/li\u003e\n  \u003cli\u003eDurable construction resists vibration and off-road stresses for longer service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying to ensure fitment?\u003c\/h3\u003e\n\u003cp\u003eBecause small off-road machines use several ignition system variants, measure and compare your existing coil and plug to the product photos and dimensions. Confirm the system uses 12V input and a horizontal 4-stroke layout—mismatched voltage or engine type can cause no spark or ECU issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify your engine type: horizontal 4-stroke (not GY6\/CG).\u003c\/li\u003e\n  \u003cli\u003eConfirm the vehicle’s electrical system is 12V to match the coil.\u003c\/li\u003e\n  \u003cli\u003eCompare connector style and mounting points with images and your part.\u003c\/li\u003e\n  \u003cli\u003eContact seller with your model\/year if unsure about compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I maintain and install the ignition kit for best results?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with small-vehicle ignition systems: remove the old coil and plug, mount the new coil in the same position, attach wiring and fit the A7TC plug with the correct torque. Keep the components clean and inspect connections regularly for secure contact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the same mounting points and routing as the original coil to avoid wire strain.\u003c\/li\u003e\n  \u003cli\u003eTighten spark plug to manufacturer torque—avoid over-tightening ceramic parts.\u003c\/li\u003e\n  \u003cli\u003eKeep connectors free of corrosion and ensure a tight 12V supply at startup.\u003c\/li\u003e\n  \u003cli\u003ePeriodically inspect for cracks, heat damage, or loose wires after off-road use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This HIAORS ignition coil and A7TC spark plug kit is aimed at owners and mechanics of small Chinese 4-stroke ATVs, quads and pit bikes (50–125cc) who need a durable, direct-replacement ignition solution. It’s suitable for riders who perform their own maintenance, repair shops stocking common replacement parts, and anyone seeking to restore reliable starting and consistent spark without upgrading the entire ignition system. Double-check engine family and 12V compatibility before purchase to ensure a proper fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this ignition kit compatible with GY6 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This coil and A7TC spark plug fit horizontal 4-stroke Chinese ATVs and pit bikes, not GY6 or CG engine types.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What voltage does the HIAORS ignition coil require?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The coil is designed for a 12V electrical system; using a different input voltage can cause no spark or ECU issues.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55161626427735,"sku":"B0FWRCYPPY","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-coil-front-assembly.jpg?v=1790330454"},{"product_id":"hiaors-mini-bike-throttle-cable-kit-7-8-red-complete-twist-throttle-50-cable-kill-switch","title":"HIAORS Mini Bike Throttle Cable Kit 7\/8\" Red — Complete Twist Throttle, 50\" Cable \u0026 Kill Switch","description":"\u003cp\u003e\u003cstrong\u003eComplete red 7\/8\" mini bike throttle cable kit by HIAORS provides a ready-to-install twist throttle, grips, cable, kill switch and accessories engineered to fit Predator 212cc\/196cc and many popular 50–212cc pit and mini bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis HIAORS throttle assembly replaces worn or incompatible controls with a single coordinated set: twist throttle, matching grips, 50\" cable (45\" exposed conduit), red housing clamp, kill switch, cruise assist and installation hardware. The kit is made for a wide range of mini bikes and small 4-stroke pit bikes so you can restore throttle function or upgrade the cockpit appearance with a unified red finish.\u003c\/p\u003e\n\n\u003ch3\u003eWill this throttle kit fit my mini bike or engine?\u003c\/h3\u003e\n\u003cp\u003eCompatibility is broad: the kit is designed to work with many 50–212cc small engines and models from Predator, Coleman, Baja, SSR, Apollo and other common mini bike brands. Check your engine size and the throttle bore before ordering to ensure a match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Predator 196cc and 212cc engines and many 4-stroke 50–125cc pit bikes\u003c\/li\u003e\n  \u003cli\u003eIncludes parts suitable for Coleman CT200U\/CT200U-EX, CC100X, BT200X and similar models\u003c\/li\u003e\n  \u003cli\u003eCompatible with Baja MB165\/MB200, Baja Warrior series, SSR125 and Apollo CRF50-style bikes\u003c\/li\u003e\n  \u003cli\u003eConfirm the 7\/8\" handlebar throttle mounting and compare cable length measurements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long is the cable and can I trim or extend it?\u003c\/h3\u003e\n\u003cp\u003eThe supplied throttle cable measures 50 inches overall with 45 inches of outer conduit exposed; this length suits most mini bike layouts but may require minor routing adjustments. You can trim excess cable at the outer end and use the included cable stops and ties for a tidy installation; extending a cable is not recommended without professional-grade parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTotal cable length: 50\" (1270 mm)\u003c\/li\u003e\n  \u003cli\u003eExposed conduit length: 45\" (1148 mm)\u003c\/li\u003e\n  \u003cli\u003ePackage includes two cable stops and six ties for routing and securing\u003c\/li\u003e\n  \u003cli\u003eTrim excess outer jacket for fit; avoid kinking inner core when shortening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components come in the HIAORS throttle assembly package?\u003c\/h3\u003e\n\u003cp\u003eThis kit contains everything needed to swap or upgrade a throttle on compatible mini bikes, reducing the need to source separate parts. Fasteners and a small wrench are included so you can complete most installations with basic hand tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwist throttle housing with integrated red clamp and matching grips\u003c\/li\u003e\n  \u003cli\u003eRed throttle cable and two cable stops for secure attachment\u003c\/li\u003e\n  \u003cli\u003eOn\/off kill switch, cruise assist and six cable ties for neat routing\u003c\/li\u003e\n  \u003cli\u003eSmall wrench included for clamp installation and quick adjustments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill installing this kit change the look or control feel?\u003c\/h3\u003e\n\u003cp\u003eThe kit was styled with an upgraded uniform red color across grips, clamp, cable and switch to deliver a cleaner, more coordinated cockpit. Control feel depends on cable routing and throttle tension adjustments, but the twist throttle is compatible with typical mini bike ergonomics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUnified red components create a streamlined visual upgrade\u003c\/li\u003e\n  \u003cli\u003eTwist throttle provides familiar rotary control for gradual throttle input\u003c\/li\u003e\n  \u003cli\u003eCruise assist helps hold throttle position during extended rides\u003c\/li\u003e\n  \u003cli\u003eProper routing and secure fastening preserve smooth response\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: the HIAORS 7\/8\" Mini Bike Throttle Cable Kit is aimed at DIY mechanics, mini bike restorers and riders who need a full, color-matched replacement throttle assembly for Predator engines and a wide range of 50–212cc pit or mini bikes. Buy this kit if you want a complete plug-and-play style swap with included hardware, or if you’re upgrading the cockpit appearance while restoring reliable throttle control.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit Predator 212cc engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The HIAORS 7\/8\" kit is compatible with Predator 196cc and 212cc engines when your bike uses a 7\/8\" throttle mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I shorten the throttle cable myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can trim excess outer jacket and shorten carefully, but avoid damaging the inner core; use included stops and ties for secure routing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55162169721175,"sku":"B0F48724TX","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-front-assembly-view.jpg?v=1790335166"},{"product_id":"hiaors-gy6-flywheel-puller-clutch-lock-nut-tool-kit-24mm-27mm-puller-20mm-24mm-sockets-for-50-150cc-bikes","title":"HIAORS GY6 Flywheel Puller \u0026 Clutch Lock Nut Tool Kit — 24mm\/27mm Puller, 20mm\/24mm Sockets for 50–150cc Bikes","description":"\u003cb\u003eHIAORS two-piece tool kit combines a GY6 stator\/flywheel puller (24mm \u0026amp; 27mm) and a clutch lock nut spanner\/socket (20mm \u0026amp; 24mm) to remove and install flywheels and clutch lock nuts on 50–150cc motorcycles, ATVs, pit bikes and scooters.\u003c\/b\u003e\n\nThis compact kit brings two workshop essentials together so riders and home mechanics can separate tapered flywheels and secure or release clutch lock nuts without improvising with wrong-sized wrenches. The set is machined to fit common small-engine sizes and works with many GY6-style engines and popular 50–150cc machines, letting you service stators, magnetos and clutches more quickly and with less risk of damage.\n\n\u003ch3\u003eWhich engines and bikes will these tools fit?\u003c\/h3\u003e\n\u003cp\u003eThe puller and spanner were designed for small-displacement, single-cylinder bikes and ATVs that use GY6-style magnetos and standard clutch lock nut sizes. They fit a wide range of 50cc to 150cc scooters, pit bikes, quads and go-karts from many common manufacturers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGY6-type 50cc, 125cc and 150cc engines compatible with 24mm \u0026amp; 27mm puller sizes\u003c\/li\u003e\n  \u003cli\u003eClutch lock nut tool fits 20mm and 24mm lock nuts on many 50–125cc models\u003c\/li\u003e\n  \u003cli\u003eUseful for scooters, pit\/dirt bikes, ATVs, quads and small go-karts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the flywheel puller safely and effectively?\u003c\/h3\u003e\n\u003cp\u003eThread the puller into the flywheel’s threaded holes and tighten the center bolt to press the flywheel off the crank taper evenly. Use steady, even force and confirm threads are engaged so the puller extracts the flywheel without bending or marring components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch the puller size (24mm or 27mm) to the engine’s threaded hole diameter\u003c\/li\u003e\n  \u003cli\u003eEnsure clean threads and hand-start bolts to avoid cross-threading\u003c\/li\u003e\n  \u003cli\u003eTighten center bolt gradually until the flywheel works free from the crank taper\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I use the clutch lock nut spanner, and how does it help?\u003c\/h3\u003e\n\u003cp\u003eThe clutch lock nut spanner is intended to hold or remove the lock nut that secures the clutch assembly during repairs or replacements. Its sockets are sized to fit common small-engine lock nuts so you can torque or loosen them without slipping or damaging the nut face.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the 20mm or 24mm socket depending on the lock nut size\u003c\/li\u003e\n  \u003cli\u003ePair with a breaker bar or torque wrench where required for safe loosening\/tightening\u003c\/li\u003e\n  \u003cli\u003eWorks to lock the clutch while removing the nut or to hold parts during reassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what materials\/finish can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with one GY6 magneto flywheel puller and one clutch lock nut spanner covering the sizes listed. The tools are built for workshop use; expect metal construction with durable machining for thread engagement and socket fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 × GY6 magneto flywheel puller (24mm \u0026amp; 27mm compatible)\u003c\/li\u003e\n  \u003cli\u003eIncluded: 1 × clutch lock nut tool \/ spanner (20mm \u0026amp; 24mm sockets)\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeated mechanical use on small-displacement engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for\n\nThis HIAORS kit is aimed at DIY mechanics, home garage owners and professional technicians who service 50–150cc motorcycles, scooters, pit bikes and ATVs. If you need a reliable, size-specific puller for GY6-style flywheels and a matched clutch lock nut spanner to speed clutch work and stator replacement, this compact two-piece set covers the common sizes without needing multiple specialty tools.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this puller fit my 150cc GY6 engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the puller includes 24mm and 27mm sizes compatible with most GY6-style 150cc engines; confirm your flywheel threaded hole size before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the spanner handle both 20mm and 24mm clutch lock nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the spanner provides sockets for 20mm and 24mm lock nuts so you can loosen or tighten common small-engine clutch nuts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55162499137879,"sku":"B0D9VND98L","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-front-view-tools-on-white.jpg?v=1790336740"},{"product_id":"hiaors-7-8-left-hand-hydraulic-brake-master-cylinder-for-50-250cc-atvs-adjustable-aluminum-lever","title":"HIAORS 7\/8\" Left-Hand Hydraulic Brake Master Cylinder for 50–250cc ATVs — Adjustable Aluminium Lever","description":"\u003cp\u003e\u003cstrong\u003eHIAORS 7\/8\" left-hand hydraulic brake master cylinder lever is a durable, adjustable replacement fitted for 50–250cc Chinese ATVs and pit bikes that need a reliable left-side hydraulic brake control.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis precision-machined aluminum master cylinder and lever assembly replaces worn or damaged left-side hydraulic brake pumps on many popular Chinese 4-stroke quads and dirt bikes. Built with an adjustable lever reach, a clear fluid inspection window, and an 8mm mirror hole plus brake-light switch provision, it’s engineered for routine maintenance and on-trail dependability. Before ordering, confirm your handlebar is 7\/8\" (22mm) and compare the mounting and port locations to your original part.\u003c\/p\u003e\n\n\u003ch3\u003eWhat models and engine sizes will this HIAORS master cylinder fit?\u003c\/h3\u003e\n\u003cp\u003eThis left-hand unit supports a wide range of Chinese-brand ATVs and pit bikes across 50cc up to 250cc four-stroke platforms. Compatibility covers many common model lines, but sizing and mounting must match your existing brake pump.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 50cc, 70cc, 90cc, 110cc, 125cc, 150cc, 200cc, 250cc Chinese ATVs and pit dirt bikes.\u003c\/li\u003e\n  \u003cli\u003eWorks with brands like Taotao, Coolster, Kazuma, Sunl, Loncin, Baja, Ice Bear and others.\u003c\/li\u003e\n  \u003cli\u003eSpecific model examples: Tao Tao Boulder B1, ATA-110\/125 series, Coolster 3050\/3125 lines, Kazuma Falcon 90.\u003c\/li\u003e\n  \u003cli\u003eConfirm 7\/8\" (22mm) handlebar clamp size and mounting hole alignment before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the adjustable lever improve braking control?\u003c\/h3\u003e\n\u003cp\u003eThe lever’s adjustable design lets riders set reach and angle to suit hand size and riding style, allowing safer, more comfortable braking without forcing grip changes. The quick-release action returns the lever to unlocked position for easy disengagement when needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMultiple reach positions accommodate small to large hands.\u003c\/li\u003e\n  \u003cli\u003eQuick-unlock mechanism returns lever after a firm pull.\u003c\/li\u003e\n  \u003cli\u003eErgonomic angle reduces wrist fatigue on long rides.\u003c\/li\u003e\n  \u003cli\u003eFine-tuning helps match lever feel to existing brake setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and reliability features does this pump include?\u003c\/h3\u003e\n\u003cp\u003eManufactured from high-quality aluminum, the HIAORS master cylinder offers improved strength and resistance to wear compared with lower-grade cast parts. Sealing and an inspection window help preserve hydraulic integrity and let you monitor brake fluid level at a glance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum body for strength and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eWell-sealed housing to minimize hydraulic fluid loss.\u003c\/li\u003e\n  \u003cli\u003eIntegrated inspection window for quick fluid checks.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in 8mm rearview mirror hole and brake-light switch port included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo I need any extra parts or tools to install it?\u003c\/h3\u003e\n\u003cp\u003eBasic tools and common brake-bleeding supplies are usually sufficient for swap-in installation, but confirm your bike’s fittings and lines match the master cylinder ports. If your OEM mounting hardware or banjo fittings differ, you may need adapters or replacement bolts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires 7\/8\" (22mm) handlebar clamp—verify before buying.\u003c\/li\u003e\n  \u003cli\u003eMay need brake fluid and bleeding kit after installation.\u003c\/li\u003e\n  \u003cli\u003eCheck if banjo bolt size and thread match existing brake lines.\u003c\/li\u003e\n  \u003cli\u003eMinor hand tools (wrenches, pliers) typically required for fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: riders and mechanics who own Chinese-made ATVs or pit bikes—from youth 50cc quads to larger 250cc 4-stroke machines—seeking a robust, adjustable left-hand hydraulic master cylinder replacement. It’s ideal for DIY maintenance, quick on-trail repairs, or upgrades where improved lever ergonomics, an inspection window, and mirror\/switch compatibility matter. Always match handlebar diameter and mounting points to your original unit to ensure correct fit and safe braking performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this master cylinder fit my 110cc TaoTao ATV?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s compatible with many TaoTao 110cc models like ATA-110 series if your handlebar is 7\/8\" and mounting points match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the unit include a brake-light switch and mirror hole?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it has an 8mm mirror hole and a provision for a brake-light switch; wiring and switch may be sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55162617495895,"sku":"B07CCYWDV7","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-left-brake-master-cylinder-front-view.jpg?v=1790337623"},{"product_id":"hiaors-inner-tube-for-18-inch-rims-2-75-3-00-18-surron-light-bee-x-fit-heavy-duty-butyl-reinforced-seams","title":"HIAORS Inner Tube for 18-inch Rims 2.75\/3.00-18, Surron Light Bee X Fit — Heavy-Duty Butyl, Reinforced Seams","description":"\u003cp\u003e\u003cstrong\u003eHIAORS 2.75\/3.00-18 inner tube is a heavy-duty butyl replacement tube built to fit 18\" rims on Surron Light Bee X, Sur Ron LBX, Talaria Pro SS and a wide range of off-road motorcycles and pit bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement inner tube is engineered for riders who want reliable air retention, stronger puncture resistance and a smoother ride across trails and roads. Constructed from thick butyl rubber with reinforced seams and a straight valve stem, this tube suits 18-inch rims and is listed in compatible sizes as 2.50-18, 2.75-18, 3.00-18, 80\/90-18, 90\/90-18 and 80\/100-18. It’s offered as a direct-fit spare for electric dirt bikes like the Surron Light Bee X, Sur Ron LBX, Talaria Pro SS 3.0 and several small-displacement motorcycles, providing a rugged, user-friendly replacement option.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tube improve ride comfort and impact control?\u003c\/h3\u003e\n\u003cp\u003eThe thick butyl compound helps absorb shock and reduces vibrations transmitted through the wheel, which makes bumps feel less harsh. Reinforced walls and precise seam construction maintain consistent pressure, reducing sudden deflation and improving handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThick butyl rubber for added shock damping\u003c\/li\u003e\n  \u003cli\u003eReinforced seams to prevent blowouts under load\u003c\/li\u003e\n  \u003cli\u003eStable air pressure for consistent handling across terrains\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this inner tube fit my Surron Light Bee X or other bikes?\u003c\/h3\u003e\n\u003cp\u003eThis tube is designed for 18-inch rims and covers common size notations used on off-road and small-displacement bikes. Confirm your rim diameter and the tube size stamped on your current tube or tire before ordering to ensure correct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 18\" rim sizes: 2.50-18, 2.75-18, 3.00-18\u003c\/li\u003e\n  \u003cli\u003eAlso labeled as 80\/90-18, 90\/90-18, 80\/100-18 for cross-reference\u003c\/li\u003e\n  \u003cli\u003eCompatible with Surron, Talaria, Rebel 250, CB350\/CB360 and similar models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the valve and air retention reliable?\u003c\/h3\u003e\n\u003cp\u003eThe straight valve stem is heavy-duty and comes with a valve core cap, designed to seal tightly and allow easy inflation without manual locking. Enhanced air retention comes from the butyl material and precision manufacturing, keeping pressure stable over longer periods.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStraight valve stem for easy access and inflation\u003c\/li\u003e\n  \u003cli\u003eValve core cap included for secure sealing\u003c\/li\u003e\n  \u003cli\u003ePrecision-engineered seams to minimize slow leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this tube against punctures and wear?\u003c\/h3\u003e\n\u003cp\u003eBuilt from a thicker butyl rubber than many standard tubes, this inner tube resists cracking, abrasion and punctures better. While no tube is puncture-proof, the reinforced construction extends service life and reduces roadside repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThick butyl resists abrasion and weathering\u003c\/li\u003e\n  \u003cli\u003eReinforced walls lower the risk of pinch flats\u003c\/li\u003e\n  \u003cli\u003eSuitable for trail use and daily commuting conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders of electric dirt bikes, pit bikes and lightweight motorcycles who need a rugged, reliable replacement inner tube for 18\" rims. If you own a Surron Light Bee X, Sur Ron LBX, Talaria Pro SS, Rebel 250, CB350\/CB360, DS100, AX100 or similar model and want improved air retention and tougher construction than stock tubes, this HIAORS butyl tube is a practical choice. Always verify your rim diameter and tire\/tube size before purchase to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What rim size does this HIAORS inner tube fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits 18-inch rims and is specified as 2.50-18, 2.75-18, 3.00-18 or equivalent 80\/90-18, 90\/90-18, 80\/100-18.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the tube include a valve cap and is it easy to inflate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it includes a valve core cap and a straight valve stem for straightforward inflation and secure sealing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55162867581271,"sku":"B08B4P5L45","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-front-view-inner-tube.jpg?v=1790339331"},{"product_id":"hiaors-pz30-30mm-carburetor-for-150-300cc-cg-4-stroke-engines-aluminum-body-improved-low-mid-throttle","title":"HIAORS PZ30 30mm Carburetor for 150–300cc CG 4-Stroke Engines — Aluminium Body, Improved Low-Mid Throttle","description":"\u003cp\u003e\u003cstrong\u003eThe HIAORS PZ30 is a 30mm replacement carburetor designed to restore smoother starts, steadier idling, and better low-to-mid throttle response on many 4-stroke 150–300cc motorcycles, ATVs, pit bikes and go-karts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your machine suffers from hard starting, inconsistent idle, poor throttle response, or higher fuel use due to a worn or mismatched factory carburetor, the PZ30 offers a direct, affordable swap. Built from rust-resistant aluminum with brass wear parts and sealed fittings, this carb balances fuel and air for improved everyday performance without complicated jetting for many popular CG-style engines and models from brands like TaoTao, Apollo, Lifan and Zongshen.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines will the PZ30 carburetor fit?\u003c\/h3\u003e\n\u003cp\u003eThe PZ30 fits a wide range of CG-style 4-stroke 150–300cc engines found on pit bikes, ATVs, quads, go-karts and small motorcycles. It is not compatible with GY6 engines. Check your intake manifold size and throttle linkage before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for CG 150cc–300cc 4-stroke engines and similar setups\u003c\/li\u003e\n  \u003cli\u003eCommon compatible models: XR200 variants, TaoTao, Apollo, Baja, Loncin, Lifan, Zongshen\u003c\/li\u003e\n  \u003cli\u003eWorks for pit dirt bikes, quads, go-karts and small motorcycles\u003c\/li\u003e\n  \u003cli\u003eNot suitable for GY6 engine families\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the PZ30 improve engine behavior?\u003c\/h3\u003e\n\u003cp\u003ePrecision machining and a 30mm bore help the PZ30 deliver a more consistent air–fuel mixture compared with degraded stock carbs. The result is easier cold and hot starts, steadier idling and stronger throttle response in low and mid rpm ranges without aggressive modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBetter mixture metering for smoother startup and idle stability\u003c\/li\u003e\n  \u003cli\u003eImproved low-to-mid acceleration feel and throttle control\u003c\/li\u003e\n  \u003cli\u003eReduced fuel waste from leaking or worn factory carburetors\u003c\/li\u003e\n  \u003cli\u003eSealed components and brass wear parts resist corrosion and wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction features ensure reliability?\u003c\/h3\u003e\n\u003cp\u003eThe body is cast from lightweight, rust-resistant aluminum for durability and heat tolerance. Critical moving parts use wear-resistant brass and sealing rings to limit leaks and fuel dilution, making the carburetor resilient under varied riding conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy main body: light, corrosion-resistant and durable\u003c\/li\u003e\n  \u003cli\u003eBrass internal components for wear resistance and longevity\u003c\/li\u003e\n  \u003cli\u003eSealing rings to prevent fuel leakage and maintain consistent pressure\u003c\/li\u003e\n  \u003cli\u003eSimple design for easier maintenance and longer service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the PZ30 difficult to install or tune?\u003c\/h3\u003e\n\u003cp\u003eThe PZ30 is built for straightforward installation as a replacement carburetor on compatible machines. Basic tools and mechanical knowledge are usually enough; minor jet or idle adjustments may be needed to match local altitude, fuel quality, or exhaust modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUser-friendly mounting layout for quick swap with many CG-style carbs\u003c\/li\u003e\n  \u003cli\u003eTypical installation requires basic hand tools and hose connections\u003c\/li\u003e\n  \u003cli\u003eSimple idle and mixture adjustments possible without specialty tools\u003c\/li\u003e\n  \u003cli\u003eMay require jet changes for high-altitude or heavily modified engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders, mechanics and hobbyists who need a robust, cost-effective replacement carburetor for 150–300cc CG-style 4-stroke engines. Choose the HIAORS PZ30 if you want to restore reliable starts, stabilize idle, and improve everyday throttle response on pit bikes, ATVs, quads or go-karts from popular budget brands—without replacing the entire engine or exhaust system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this carburetor fit my CG200\/250 motorcycle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the PZ30 is compatible with many CG-style 200–250cc engines but confirm intake manifold diameter and linkage match before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install or tune it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required for installation; basic hand tools work and minor idle\/mixture tuning may be helpful.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55163067040087,"sku":"B07L3WLTTV","price":33.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-pz30-front-view.jpg?v=1790341065"},{"product_id":"hiaors-90-100-16-dirt-bike-inner-tubes-16in-rear-2-pack-heavy-duty-butyl-reinforced-valve","title":"HIAORS 90\/100-16 Dirt Bike Inner Tubes 16in Rear 2-Pack — Heavy-Duty Butyl \u0026 Reinforced Valve","description":"\u003cstrong\u003eHIAORS 90\/100-16 inner tubes are heavy-duty 16\" butyl replacements designed for rear dirt bike and pit bike tires, sold as a two-pack and built for improved air retention and durability.\u003c\/strong\u003e\n\n\u003cp\u003eThese replacement inner tubes fit a wide range of 16-inch rear applications — from CRF and KLX models to KTM, TTR, DRZ, TC85 and many electric pit-bike conversions. Constructed from thicker butyl rubber with reinforced seams and a straight valve stem, they aim to reduce punctures, hold pressure longer and deliver more consistent handling on off-road rides and commuting routes.\u003c\/p\u003e\n\n\u003ch3\u003eWhich motorcycles and tires work with these 90\/100-16 inner tubes?\u003c\/h3\u003e\n\u003cp\u003eThis tube set is made for 16-inch rims with 20×3-type tires and lists compatibility across many small-displacement dirt bikes and pit bikes. Check your rim diameter and tire profile before ordering to ensure a correct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models include CR80RB, CRF125FB, CRF150F, KLX125L\/KLX140L, KX100, DRZ125L, TTR125L\/LE, TC85, KTM85, KTM125 and similar pit bikes.\u003c\/li\u003e\n  \u003cli\u003eAlso fits many 3.0–3.5×16 and 90\/100-16, 100\/80-16 size notations and 20×3 tires.\u003c\/li\u003e\n  \u003cli\u003eUseful for electric conversions and small e-bikes like LectriX, Z20 Max, Shinko SR244 and Coolster models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these tubes handle punctures and air retention on trails?\u003c\/h3\u003e\n\u003cp\u003eHIAORS uses thicker butyl rubber and reinforced walls to resist abrasion and reduce air loss compared with thinner generic tubes. The straight valve stem includes a core cap to help maintain a secure seal during rough use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThicker butyl construction for wear and puncture resistance.\u003c\/li\u003e\n  \u003cli\u003ePrecision seams and reinforced walls to limit slow leaks.\u003c\/li\u003e\n  \u003cli\u003eStraight high-strength valve stem with a protective cap for reliable sealing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these tubes affect ride balance and wheel performance?\u003c\/h3\u003e\n\u003cp\u003eThe tube design balances strength and optimized rubber density to keep rotating weight low while preserving durability. Riders should notice smoother rotation and consistent pressure, which helps with handling during climbs and longer rides.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOptimized rubber density reduces friction and rotational drag.\u003c\/li\u003e\n  \u003cli\u003eMaintains consistent inflation for predictable handling on off-road terrain.\u003c\/li\u003e\n  \u003cli\u003eSuitable for both trail riding and daily commuting on small motorcycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and installation reminders?\u003c\/h3\u003e\n\u003cp\u003eRim size for these tubes is 16 inches; the outside diameter is approximately 21.24 inches and width about 2.76 inches. Multiple size notations are common — confirm your tire's markings before purchase to avoid fitment issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon specifications: 3.25\/3.50-16, 3×16, 16×3.0; equivalent indices include 80\/90-16, 90\/90-16, 90\/100-16, 100\/80-16 and 100\/90-16.\u003c\/li\u003e\n  \u003cli\u003eVerify tire and rim markings prior to installation to ensure compatibility.\u003c\/li\u003e\n  \u003cli\u003eSold as a two-pack so you have a spare for quick roadside replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These HIAORS inner tubes are aimed at riders of small-displacement motocross, trail and pit bikes, mechanics servicing multiple 16\" rear wheel platforms, and owners of electric pit-bike conversions who want a durable, better-sealing replacement tube. If you need a heavier-duty, consistently sealing tube for frequent off-road use or for keeping a second bike ready, this two-pack offers a practical, cost-effective solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these tubes compatible with CRF125 rear tires?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 90\/100-16 HIAORS tubes list fitment for CRF125FB and many CRF150 rear tires; confirm your rim is 16 inches and tire profile matches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the valves include caps and replacement valve cores?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The tubes include a straight valve stem with a valve core cap for sealing, but replacement valve cores are not included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55163284586839,"sku":"B08BTRWWWS","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-front-packaging-2pack.jpg?v=1790343024"},{"product_id":"hiaors-mini-bike-throttle-assembly-kit-for-predator-212-gx160-gx200-50-cable-governor-linkage-spare-parts","title":"HIAORS Mini Bike Throttle Assembly Kit for Predator 212\/GX160\/GX200 - 50\" Cable, Governor Linkage, Spare Parts","description":"\u003cp\u003e\u003cstrong\u003eComplete replacement throttle assembly and linkage kit for mini bikes using Predator 212\/GX160\/GX200 and similar clone engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis HIAORS kit bundles the parts needed to restore or upgrade the throttle and governor system on a wide range of 196–224cc small OHV engines and compatible mini bike models. It combines a governor control base and arm, multiple linkage rods and springs, a 50\" throttle cable, handlebar grip, on\/off starter switch and a spare throttle linkage set to reduce downtime and make installation straightforward for DIY mechanics and service shops.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this throttle assembly improve my mini bike's control?\u003c\/h3\u003e\n\u003cp\u003eThe kit replaces worn or missing throttle and governor components so the engine responds predictably to rider input. Renewed springs and linkage reduce slack and inconsistent throttle return, restoring smoother acceleration and steadier idle behavior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGovernor control base and lever arm for accurate governor engagement\u003c\/li\u003e\n  \u003cli\u003eTwo throttle return springs and two speed control springs for reliable response\u003c\/li\u003e\n  \u003cli\u003e50\" steel-braided throttle cable for reduced stretch and precise input\u003c\/li\u003e\n  \u003cli\u003eSpare throttle linkage kit included for quick replacement of worn parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich engines and mini bike models are compatible with this kit?\u003c\/h3\u003e\n\u003cp\u003eThis assembly is built for common OHV clone engines and well-known small-engine models. It's compatible with Predator 212\/196\/224cc and many 6.5–7HP clones such as GX160\/GX200-style engines, plus a long list of mini bikes that use those powerplants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePredator 212cc, 196cc and 224cc Hemi\/Non-Hemi OHV engines\u003c\/li\u003e\n  \u003cli\u003eHond* GX160\/GX200 clone 6.5hp engines and similar Tillotson, Hisun, DuroMax units\u003c\/li\u003e\n  \u003cli\u003eFits Coleman CT200U series, BT200X, Trail 200, Baja\/Massimo MB165\/MB200 and many others\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation for a home mechanic?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows a clear sequence: fit the governor lever arm, attach linkage between the governor and carburetor\/choke, mount the governor base and hook up the speed control spring. Basic hand tools and removal of the air box are typically all that's required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMount governor lever arm on engine and connect governor rods\u003c\/li\u003e\n  \u003cli\u003eInstall throttle return and speed control springs for secure movement\u003c\/li\u003e\n  \u003cli\u003eRoute and clamp the 50\" throttle cable to handlebars; attach included grip and switch\u003c\/li\u003e\n  \u003cli\u003eExtra linkage kit provided for quick on-track or field replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and which common issues does the kit address?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships as a complete control upgrade, addressing broken cables, lost springs, seized governor levers and missing switches or grips. The additional linkage set combats the most frequently failing metal components during routine riding or heavy use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGovernor control base ×1, governor lever arm ×1, governor rods ×2\u003c\/li\u003e\n  \u003cli\u003eSpeed control springs ×2, throttle return springs ×2, extra throttle linkage kit\u003c\/li\u003e\n  \u003cli\u003eSpark plug ×1, 22mm handlebar grip ×1, 50\" throttle cable ×1, throttle clamp ×1, on-off starter switch ×1\u003c\/li\u003e\n  \u003cli\u003eAddresses throttle slop, poor idle, broken cables and missing hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: riders, hobbyists and small-engine mechanics who own or service mini bikes, go-karts or utility machines using Predator-style or GX160\/GX200 clone engines. Choose this HIAORS assembly if you need a full control-system replacement that supplies both the core parts and a spare linkage kit for reliable on-vehicle performance and easier roadside repairs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my Predator 212 engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this HIAORS kit is compatible with Predator 212 and similar 196–224cc OHV clone engines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include a throttle cable and spare linkage?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the package contains a 50\" throttle cable and an extra throttle linkage kit for replacements.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55163339374935,"sku":"B0CQSZG4CZ","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-front-assembly-overview.jpg?v=1790343339"},{"product_id":"hiaors-inner-tubes-9x3-50-4-2-80-2-50-4-bent-metal-valve-stem-2-pack-with-screw-caps","title":"HIAORS Inner Tubes 9x3.50-4 (2.80\/2.50-4) Bent Metal Valve Stem — 2-Pack with Screw Caps","description":"\u003cp\u003e\u003cstrong\u003eThese are two HIAORS inner tubes sized to fit 9x3.50-4 (2.80\/2.50-4) tires with a bent metal valve stem, designed for hand trucks, lawn equipment, scooters and small ATVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplace a flat or aging inner tube quickly with this 2-pack from HIAORS. Each tube is manufactured to match the common 9x3.50-4 tire size (also listed as 2.80-4 and 2.50-4), and includes a bent metal valve stem with a protective screw-on cap for easier inflation in confined rims. These tubes are a practical spare for utility carts, lawn mowers, wheelbarrows, dollys, kid scooters and many small recreational vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eWill these inner tubes fit my tire and rim?\u003c\/h3\u003e\n\u003cp\u003eCheck the tire sidewall for the size stamp; this tube fits tires marked 9x3.50-4, 2.80-4 or 2.50-4. The tube’s diameter and cross-section are matched to that family of tires and common small rim widths.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible markings: 9x3.50-4, 2.80-4, 2.50-4\u003c\/li\u003e\n  \u003cli\u003eIntended rim types: small utility and scooter rims used on hand trucks and lawn gear\u003c\/li\u003e\n  \u003cli\u003eAlways verify tire stamp before purchase to ensure correct fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and inflation with the bent metal valve?\u003c\/h3\u003e\n\u003cp\u003eThe bent metal valve stem lets you inflate the tube in tight wheel wells where straight valves can be hard to access. Each valve has a screw-on plastic cap to help keep dirt out and retain a secure seal while you pump.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBent valve aligns with recessed or shallow rims for easier access\u003c\/li\u003e\n  \u003cli\u003eMetal stem for durability during inflation and handling\u003c\/li\u003e\n  \u003cli\u003ePlastic screw cap included to protect valve core and dust entry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and uses are these tubes suited for?\u003c\/h3\u003e\n\u003cp\u003eThese inner tubes are built for a range of small wheeled equipment and light recreational vehicles. They are commonly used as replacement tubes for electric scooters, wheelbarrows, garden equipment and compact ATVs where the 9x3.50-4 size is standard.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with Razor E300 scooters, pocket rockets and similar models\u003c\/li\u003e\n  \u003cli\u003eFits hand trucks, utility carts, dollys and lawn mowers\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for small go-karts, skateboards with pneumatic tires, and TTR50-type ATVs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable are these tubes for regular use?\u003c\/h3\u003e\n\u003cp\u003eHIAORS inner tubes are made to hold air under typical loads and speeds expected for the listed vehicles. While they provide a dependable replacement, proper installation, correct tire pressure and avoiding sharp debris will extend their service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed from standard tube rubber suitable for light-duty wheeled equipment\u003c\/li\u003e\n  \u003cli\u003eBent metal valve helps reduce stress at the valve base during use\u003c\/li\u003e\n  \u003cli\u003eShips as a convenient 2-pack so you have a spare on hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: If you maintain small wheeled equipment — from garden tools and hand trucks to electric scooters and small recreational ATVs — and need a reliable, easy-to-install replacement inner tube, this HIAORS 2-pack is targeted for you. Ideal for hobbyists, landscapers, delivery drivers using utility carts, and families with scooters or backyard go-karts who want a quick, cost-effective way to restore a tire to service. Always confirm tire size before ordering to ensure a proper match.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these tubes fit a Razor E300 scooter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these 9x3.50-4 (2.80\/2.50-4) inner tubes are compatible with many Razor E300 models that use that tire size.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the valve stems angled or straight?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They have bent metal valve stems with a plastic screw-on cap for easier access and protection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55163426832727,"sku":"B088NGL3FH","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-front-packaging-view.jpg?v=1790344458"},{"product_id":"hiaors-recoil-pull-starter-for-47-50cc-dirt-bikes-pocket-atvs-aluminum-alloy-direct-fit-replacement","title":"HIAORS Recoil Pull Starter for 47–50cc Dirt Bikes \u0026 Pocket ATVs — Aluminium Alloy Direct-Fit Replacement","description":"\u003cp\u003e\u003cstrong\u003eHIAORS Alloy Recoil Pull Starter is a durable replacement pull-start assembly designed to fit many 47–50cc 2-stroke mini dirt bikes, pockets ATVs and quads for reliable hand-start performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your small-bike or pocket ATV recoil has worn, frayed, or failed, this HIAORS alloy pull starter provides a direct-fit, aluminum-alloy replacement engineered to restore dependable manual starts. It’s made to match common mounting patterns on popular Chinese-made 50cc platforms—so you can swap it in without modifying the engine. Below you’ll find practical answers to the most common buyer questions, installation details, compatibility notes, and what to expect from the part.\u003c\/p\u003e\n\n\u003ch3\u003eWhat bikes and ATVs will this pull starter work with?\u003c\/h3\u003e\n\u003cp\u003eThis starter is built for 47cc–50cc 2-stroke Chinese engines and fits many well-known mini dirt bike and pocket-quad models. Compatibility covers a long list of makes that share the same mounting pattern and engine layout.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with SYX Moto 50cc models including Holeshot and Blitz series\u003c\/li\u003e\n  \u003cli\u003eCompatible with SSR SX50, Coolster QG-50, X-Pro Hawk\/Bolt, DRX Holeshot-X\u003c\/li\u003e\n  \u003cli\u003eAlso fits Kayo, Apollo, KXD\/Highper, MotoTec, Thumpstar, Pitster Pro and many Chinese-branded 47–50cc engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the HIAORS starter constructed and what are the advantages?\u003c\/h3\u003e\n\u003cp\u003eThe housing and internal components use aluminum alloy for strength and resistance to deformation, while the pull rope is selected for tensile durability. Together these choices aim to give a longer service life and smoother engagement compared with brittle or plastic replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum-alloy body resists bending and warping under repeated use\u003c\/li\u003e\n  \u003cli\u003eDurable pull rope reduces fraying and improves energy transfer to the flywheel\u003c\/li\u003e\n  \u003cli\u003ePrecision mounting holes keep alignment stable for reliable engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the mounting and sizing details I need to check?\u003c\/h3\u003e\n\u003cp\u003eBefore buying, measure your flywheel bolt pattern to confirm fit. This HIAORS starter uses a three-bolt pattern with specific center-to-center dimensions—match these to your engine to avoid fitment issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounting holes: 3-bolt pattern\u003c\/li\u003e\n  \u003cli\u003eAdjacent hole center distance: 3.2 inches (81 mm)\u003c\/li\u003e\n  \u003cli\u003eAcross hole center distance: 4.8 inches (121 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and what comes in the kit?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable removing the existing recoil and bolting a new one onto the flywheel. The kit includes the starter assembly plus three mounting screws so you can install it right away.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes starter assembly and three mounting screws\u003c\/li\u003e\n  \u003cli\u003eSimple bolt-on replacement—no engine modification required if your holes match\u003c\/li\u003e\n  \u003cli\u003eRecommended: verify bolt pattern and orientation before tightening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Riders, family mechanics, and shop technicians who need a rugged, cost-effective replacement pull starter for small 47–50cc 2-stroke dirt bikes, pocket bikes, and ATVs. It’s best for users with engines that share the three-bolt mounting layout listed above and anyone who wants a metal-bodied alternative to worn or plastic units. If you’re unsure about fitment, measure your existing starter’s mounting hole distances or contact HIAORS support with photos for help before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 49cc dirt bike?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your 49cc uses the listed three-bolt pattern (adjacent 3.2\" \/ across 4.8\"), it should fit—confirm by measuring your starter mounting holes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include mounting screws?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the HIAORS kit includes the starter and three mounting screws for immediate installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55163921400151,"sku":"B08LD33R2G","price":31.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-front-view-assembled-starter.jpg?v=1790348241"},{"product_id":"hiaors-mini-bike-exhaust-header-kit-for-predator-212-224-6-5hp-tig-welded-heat-shielded-performance","title":"HIAORS Mini Bike Exhaust Header Kit for Predator 212\/224 6.5hp, TIG-welded \u0026 Heat-Shielded Performance","description":"\u003cp\u003e\u003cstrong\u003eHIAORS Mini Bike Exhaust Pipe Header Kit is a complete bolt-on exhaust system designed to replace stock headers on Predator 212\/224 and similar 5.5–7HP OHV clone engines, improving flow, sound and durability for mini bikes, go-karts and small engine projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis header kit includes a heavy-duty TIG-welded header, heat shield materials, gasket, fasteners, a wrench, a simple carb jet kit and a spark plug so you can fit and tune the system right away. It is built from corrosion-resistant metal to resist moisture and vibration encountered in off-road riding, and it’s compatible with a long list of mini bikes, karts and utility machines that use Predator-style small engines.\u003c\/p\u003e\n\n\u003ch3\u003eWill this header fit my Predator 212 or similar clone engine?\u003c\/h3\u003e\n\u003cp\u003eYes — the HIAORS header is engineered to match the exhaust port and bolt pattern used on Predator 212cc, 196cc, 224cc and many GX160\/GX200 clone engines. It’s sized to work with both hemi and non-hemi configurations commonly found in small engine applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Predator 212\/196\/224, GX160\/GX200 style OHV clones.\u003c\/li\u003e\n  \u003cli\u003eCompatible with many mini bikes, go-karts, pumps and washers that use those engines.\u003c\/li\u003e\n  \u003cli\u003eIncludes gasket and hardware to align with standard exhaust ports.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this header affect performance and sound?\u003c\/h3\u003e\n\u003cp\u003eThe pipe improves exhaust evacuation compared with many restrictive factory headers, which can help the engine breathe more efficiently and deliver a more responsive throttle feel. You’ll also notice a deeper, more pronounced exhaust tone; the kit is tuned for a balance of sound and usable mid-range power rather than extreme peak rpm gains.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOptimizes exhaust flow for steadier power delivery.\u003c\/li\u003e\n  \u003cli\u003eProduces a fuller, sportier exhaust note without extreme volume spikes.\u003c\/li\u003e\n  \u003cli\u003eComes with a basic jetting kit to help tune air\/fuel after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build quality should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe header is constructed from corrosion-resistant metal and uses TIG welds at stress points to resist cracking under vibration and heat. A supplied heat shield tape and a protective shield help reduce radiant heat near the rider’s legs, and included fasteners are sized for a secure installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty TIG-welded header resists cracking and leaks.\u003c\/li\u003e\n  \u003cli\u003eRust-resistant finish tolerates outdoor use and moisture.\u003c\/li\u003e\n  \u003cli\u003eHeat shield tape plus a formed shield protect legs and components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with everything needed for a straightforward replacement of a stock header: the exhaust pipe, heat shield tape and shield, gasket, screws, ties, a wrench, a basic carburetor main jet\/ emulsion tube set and a replacement F7TC spark plug. Most mechanically literate users can install it with basic hand tools in an hour or two.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x header pipe, 1x gasket, 2x screws, 1x wrench included.\u003c\/li\u003e\n  \u003cli\u003eCarb jet kit (emulsion tube + three main jets) for post-install tuning.\u003c\/li\u003e\n  \u003cli\u003eHeat shield tape and ties to secure shielding; F7TC spark plug included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The HIAORS Mini Bike Exhaust Header Kit is aimed at hobbyists, racers and small-engine DIYers who run Predator-style 5.5–7HP engines in mini bikes, go-karts, and utility equipment. It’s a good upgrade for riders wanting improved throttle response, a more engaging exhaust note and a durable replacement for corroded or damaged factory headers. If you need a drop-in style header with basic tuning parts included, this kit provides a practical, ready-to-fit option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit Coleman CT200U and Baja Warrior models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the HIAORS header fits many Coleman CT200U and Baja Warrior MB165\/MB200 variants that use Predator-style 212\/196\/224 clone engines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is tuning required after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A basic jetting adjustment may be needed; the kit includes an emulsion tube and three main jets to help optimize air\/fuel mix.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55164046016855,"sku":"B0D813XWZP","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-header-front-view.jpg?v=1790349289"},{"product_id":"hiaors-12-5x2-75-tire-inner-tube-set-12-1-2x2-75-replacement-for-razor-mx350-mx400-mini-bikes","title":"HIAORS 12.5x2.75 Tyre \u0026 Inner Tube Set — 12-1\/2x2.75 Replacement for Razor MX350\/MX400, Mini Bikes","description":"\u003cp\u003e\u003cstrong\u003eHIAORS 12.5x2.75 tire and inner tube set is a direct aftermarket replacement sized for Razor MX350\/MX400 Dirt Rocket, X-Treme X-560, EZIP 750\/500 and many mini pocket bikes and scooters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis tire-and-tube combo delivers a ready-to-install replacement when an original wheel wears out or is punctured. The set contains one 12-1\/2 x 2-3\/4 tire paired with a matching inner tube sized to fit the same rim; it’s engineered for light off-road and pavement use on small electric or gas-powered youth bikes and scooters. It’s an economical aftermarket option designed to restore rolling performance and maintain intended ground clearance and handling.\u003c\/p\u003e\n\n\u003ch3\u003eWill this fit my Razor MX350 or MX400 without modification?\u003c\/h3\u003e\n\n\u003cp\u003eIf your vehicle uses a 12.5 x 2.75 (12-1\/2 x 2-3\/4) wheel size, this set should mount directly as a like-for-like aftermarket replacement. Confirm rim width and tire diameter against your current tire labeling and owner’s manual before purchasing to ensure compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes one tire and one inner tube sized 12.5 x 2.75.\u003c\/li\u003e\n  \u003cli\u003eDesigned for common kid-size electric and gas pocket bikes and scooters.\u003c\/li\u003e\n  \u003cli\u003eNo special adapters typically required for matching 12.5\" rims.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the HIAORS tire for off-road and pavement riding?\u003c\/h3\u003e\n\n\u003cp\u003eThis tire is manufactured as an aftermarket option for small off-road and mixed-surface use; it balances tread grip and ride comfort rather than heavy-duty industrial service life. Expect reliable short- to medium-term performance for recreational riding, commuting to school, and backyard trails, provided proper inflation and routine inspection are maintained.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTread pattern suited for light dirt, grass, and paved surfaces.\u003c\/li\u003e\n  \u003cli\u003eInner tube included to simplify installation and reduce fitment issues.\u003c\/li\u003e\n  \u003cli\u003eAftermarket construction for cost-effective replacement needs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools will I need?\u003c\/h3\u003e\n\n\u003cp\u003eInstalling this tire-and-tube set is straightforward for anyone familiar with small-wheel maintenance. You’ll need basic tire-removal tools, a pump, and an adjustable wrench or socket to remove the wheel; a tire spoon and rim protectors make the job easier and reduce risk of pinching the tube.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRemove wheel bolts with wrench or socket set.\u003c\/li\u003e\n  \u003cli\u003eUse tire spoons and rim protectors to change tire without damaging rim.\u003c\/li\u003e\n  \u003cli\u003eInflate tube to recommended pressure and check bead seating before riding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering this replacement set?\u003c\/h3\u003e\n\n\u003cp\u003eMeasure the current tire’s sidewall marking to confirm 12-1\/2 x 2-3\/4 sizing and inspect valve type on your existing tube. Also verify recommended tire pressure and ensure the rim width is compatible with a 2.75-inch tire to avoid fitment or handling problems.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConfirm exact size marking: 12.5 x 2.75 (12-1\/2 x 2-3\/4).\u003c\/li\u003e\n  \u003cli\u003eCheck valve stem type and rim hole alignment.\u003c\/li\u003e\n  \u003cli\u003eCompare tire tread profile to your riding conditions for best choice.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: riders, parents, and maintenance techs seeking an affordable, plug-and-play replacement tire and inner tube for youth electric or gas mini bikes and scooters such as Razor MX350\/MX400, X-Treme X-560, EZIP 750\/500 and similar models. It’s ideal for recreational riders and fleet owners who need a cost-effective spare to keep small vehicles rolling and safe for everyday use. Always verify sizing and inspect components during installation; consult a mechanic if you’re unsure about fitment or ride safety.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this set include both tire and inner tube?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the package contains one 12.5 x 2.75 tire plus a matching inner tube.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it fit my Razor MX350 or MX400?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your current tire is marked 12-1\/2 x 2-3\/4, this set is a compatible aftermarket replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55164046704983,"sku":"B08FY3JDTX","price":48.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-front-view-tire-assembly.jpg?v=1790349315"},{"product_id":"hiaors-212cc-exhaust-pipe-jet-kit-for-predator-196-224cc-engines-tig-welded-header-tuning-parts","title":"HIAORS 212cc Exhaust Pipe Jet Kit for Predator 196–224cc Engines — TIG-welded Header \u0026 Tuning Parts","description":"\u003cp\u003e\u003cstrong\u003eHIAORS 212cc exhaust pipe jet kit is a complete replacement header and tuning bundle designed to fit Predator-style 196–224cc OHV clone engines for mini bikes, go-karts and small utility equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit upgrades the stock exhaust with a longer, TIG-welded header and includes tuning parts so your engine breathes cleaner, sounds stronger and runs with improved throttle response. It’s built for common 5.5–7HP clone engines (Predator, GX160\/GX200 style and many Harbor Freight\/Powerhorse compatibles) and arrives with hardware and a basic jetting kit to help you tune air\/fuel for varied setups.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this exhaust improve performance on my mini bike or go-kart?\u003c\/h3\u003e\n\u003cp\u003eThe extended pipe and smoother internal flow reduce backpressure and help exhaust gases exit more efficiently, which can boost throttle response and allow the engine to run more freely. You should notice a sharper acceleration feel and a fuller exhaust tone without modifying the engine internals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLonger TIG-welded header reduces restrictive bends.\u003c\/li\u003e\n  \u003cli\u003eHeat shield protects the rider and keeps fitment tidy.\u003c\/li\u003e\n  \u003cli\u003eIncluded gasket and hardware simplify installation.\u003c\/li\u003e\n  \u003cli\u003eDesigned for 196–224cc OHV clone engines for broad compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich engines and vehicles does this HIAORS kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is made to match Predator-style 212 applications and many clones in the same family. It fits 196cc, 212cc and 224cc non-hemi\/hemi variants and is widely used on mini bikes, go-karts, pressure washers and water pumps that use these small horizontal shaft engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Predator 212\/224\/196 and GX160\/GX200 style engines.\u003c\/li\u003e\n  \u003cli\u003eWorks on Coleman CT200U, Baja Warrior MB200, Axis M200 and similar models.\u003c\/li\u003e\n  \u003cli\u003eAlso used on Harbor Freight, Powerhorse and other OHV clone brands.\u003c\/li\u003e\n  \u003cli\u003eSupports common recreational and utility applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe package arrives as a ready-to-fit assembly with the pipe, mounting hardware, a basic carburetor jetting set and a spark plug. Installation is straightforward for anyone comfortable with small engine bolt-on parts: remove the old header, fit the gasket and bolt the new pipe in place, then fine-tune jets as needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: exhaust pipe, heat shield tape, screws and gasket.\u003c\/li\u003e\n  \u003cli\u003eBonus tuning parts: emulsion tube and three main jets (0.036, 0.037, 0.038). \u003c\/li\u003e\n  \u003cli\u003eExtras: wrench, ties, F7TC spark plug for immediate use.\u003c\/li\u003e\n  \u003cli\u003eBasic hand tools required; no welding or machining needed for typical installs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The HIAORS 212cc exhaust pipe jet kit is aimed at hobbyists and DIY mechanics who run Predator-style small engines on mini bikes, go-karts, and portable equipment and want a plug-and-play header that improves flow, sound and tuneability. It’s a fit-and-go option for riders looking to upgrade stock components without major engine work, and for owners of common clone engines seeking compatible replacement parts and a simple jetting starter kit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this exhaust fit my Predator 212 engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this HIAORS kit is made for Predator-style 196–224cc OHV clone engines, including Predator 212 and similar GX160\/GX200 variants.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to rejet after installing the pipe?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Rejetting is recommended if you change intake or intake timing; the kit includes three main jets and an emulsion tube for tuning.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55164126429527,"sku":"B0D8117B2W","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-exhaust-pipe-front-view.jpg?v=1790350426"},{"product_id":"hiaors-gy6-ignition-coil-kit-for-50cc-150cc-scooters-complete-cdi-regulator-solenoid-a7tc-plug","title":"HIAORS GY6 Ignition Coil Kit for 50cc-150cc Scooters — Complete CDI, Regulator, Solenoid, A7TC Plug","description":"\u003cp\u003e\u003cstrong\u003eHIAORS GY6 Ignition Coil Solenoid Relay Voltage Regulator Kit is a complete replacement ignition set that restores reliable spark, charging and starting for GY6 50cc–150cc Chinese scooters and ATVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one kit bundles a high-output ignition coil, 6-pin AC CDI box, starter solenoid relay, 4-pin voltage regulator\/rectifier and an A7TC spark plug to service 139QMB, 139QMA, 152QMI and 157QMJ 4-stroke engines. Designed for popular Chinese scooter makes — including TaoTao, Roketa, Jonway, Sunl, Ice Bear, Baja and many OEM variants — the kit targets common electrical faults and charging problems that cause hard starts, weak acceleration and battery drain.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this kit improve my scooter's starting and acceleration?\u003c\/h3\u003e\n\u003cp\u003eThe HIAORS ignition coil produces a stronger, more consistent spark which helps the engine ignite the fuel-air mix more effectively. Paired with the CDI box that times and delivers the spark correctly, you’ll notice faster cranking and steadier throttle response under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigher secondary output for more reliable combustion.\u003c\/li\u003e\n  \u003cli\u003eCDI timing stability reduces misfires and backfiring.\u003c\/li\u003e\n  \u003cli\u003eFresh A7TC spark plug completes the ignition circuit for immediate benefit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the regulator\/rectifier protect my battery and electronics?\u003c\/h3\u003e\n\u003cp\u003eThe included 4-pin voltage regulator\/rectifier converts AC to DC while maintaining a controlled output voltage to the battery and wiring. It prevents overcharging and voltage spikes that commonly damage batteries, lights and electronic components on GY6-based machines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVoltage stabilization reduces heat and electrical stress on components.\u003c\/li\u003e\n  \u003cli\u003eEfficient heat dissipation design lowers risk of regulator failure.\u003c\/li\u003e\n  \u003cli\u003eCompatible pin layout for easy swap with standard GY6 4-pin units.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this kit a direct fit for my Chinese scooter or ATV?\u003c\/h3\u003e\n\u003cp\u003eThe HIAORS kit is built for GY6 family engines used across many 50cc–150cc Chinese scooters and ATVs. It fits models using 139QMB, 139QMA, 152QMI and 157QMJ engines, but you should verify connector types and mounting points before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with TaoTao, Roketa, Jonway, Sunl, Ice Bear and similar marques.\u003c\/li\u003e\n  \u003cli\u003eCompatible with specific model lists like ATM50 series, VIP scooters, Baja and Kandi 150 variants.\u003c\/li\u003e\n  \u003cli\u003eIncludes matching CDI and regulator pin configurations for standard GY6 wiring harnesses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the package include and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eThe box contains the ignition coil, a 6-pin AC CDI box, starter solenoid relay, 4-pin regulator\/rectifier and an A7TC spark plug — everything required to address common ignition and charging failures. Basic hand tools and a multimeter are recommended to confirm connections and test charging voltage after install.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x ignition coil; 1 x 6-pin AC CDI box; 1 x starter solenoid relay.\u003c\/li\u003e\n  \u003cli\u003e1 x 4-pin voltage regulator\/rectifier and 1 x A7TC spark plug included.\u003c\/li\u003e\n  \u003cli\u003eYou may need screwdrivers, sockets, pliers and a multimeter for verification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This HIAORS kit is aimed at DIY mechanics, scooter shops and owners of GY6 50cc–150cc scooters, ATVs and go-karts who need a reliable, cost-effective replacement for worn ignition and charging components. If your bike shows weak starts, dimming lights at idle, intermittent stalling or battery issues, this comprehensive replacement set targets those common electrical causes without requiring separate component sourcing. It’s suitable for riders who want a single-package upgrade with parts matched for GY6 electrical systems. Always check fitment against your engine code and wiring layout before purchase; professional installation is recommended if you’re not comfortable working on motorcycle electrical systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my TaoTao 150cc scooter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it fits many TaoTao 50cc–150cc models using GY6 139QMB\/152QMI engines. Verify connector types and engine code first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the regulator prevent battery overcharging?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The included 4-pin regulator\/rectifier stabilizes output to protect the battery and electrical components from voltage spikes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55165215637847,"sku":"B07VHBT9KN","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-front-kit-layout.jpg?v=1790354742"},{"product_id":"hiaors-10mm-tie-rod-ball-joint-kit-left-right-fits-50-125cc-atvs-metal-with-cotter-pins","title":"HIAORS 10mm Tie Rod Ball Joint Kit – Left \u0026 Right, Fits 50–125cc ATVs, Metal with Cotter Pins","description":"\u003cstrong\u003eHIAORS 10mm left and right tie rod ball joint kit is a ready-to-install steering end replacement for many 50cc–125cc Chinese ATVs, go-karts, pit bikes and mini quads.\u003c\/strong\u003e\n\n\u003cp\u003eIf your steering feels loose, noisy, or you see play at the steering knuckle, replacing worn tie rod ball joints is a practical fix. This HIAORS set includes left and right 10mm ball joints plus cotter pins, built from metal for a durable, corrosion-resistant connection. It’s designed specifically to match the bolt size and fit common small-displacement models from brands like TaoTao, Coolster, Roketa, Kazuma, Baja and others—helping restore responsive steering without needing expensive OEM parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhat vehicles and models will this 10mm tie rod end kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit targets mini and youth off-road vehicles that use a 10mm tie rod stud. It’s widely compatible with many Chinese 50cc–125cc ATVs, pit bikes and go-karts commonly sold under TaoTao, Coolster, SunL, NST, Roketa, Kazuma and similar badge-engineered models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits TaoTao 50–125cc lines (ATA-125D, ATA-110 series, etc.)\u003c\/li\u003e\n  \u003cli\u003eCompatible with Coolster 110\/125 models (3050\/3125 series)\u003c\/li\u003e\n  \u003cli\u003eAlso suits Roketa, Kazuma, Baja, Icebear, Lifan, Vitacci, Buyang and many small ATV\/pit bike frames\u003c\/li\u003e\n  \u003cli\u003eRequired bolt width: 10mm (0.39\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and easy to install are these HIAORS ball joints?\u003c\/h3\u003e\n\u003cp\u003eEach ball joint is made from high-quality metal with a smooth, treated surface to resist corrosion and wear. They’re engineered for straightforward installation using basic hand tools and include cotter pins so you can secure the studs quickly without special presses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMetal construction for strength and longevity\u003c\/li\u003e\n  \u003cli\u003eSmooth, adhesion-treated finish to reduce rust\u003c\/li\u003e\n  \u003cli\u003eInstallable with common tools; no hydraulic press required for many applications\u003c\/li\u003e\n  \u003cli\u003eIncludes 8 cotter pins for a secure fit of all four joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how do you verify the right part?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with two left and two right 10mm tie rod ball joints plus eight cotter pins so you can service both sides of the steering linkage. Check the stud diameter and thread pattern on your vehicle’s existing parts before purchase to confirm fit—measuring the bolt width at 10mm ensures compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage: 2 left joints, 2 right joints, 8 cotter pins\u003c\/li\u003e\n  \u003cli\u003eVerify: measure existing tie rod stud diameter (10mm required)\u003c\/li\u003e\n  \u003cli\u003eVisual check: compare mounting shape and thread orientation\u003c\/li\u003e\n  \u003cli\u003eAbsence of OEM numbers: match by physical dimensions and vehicle model list\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This HIAORS tie rod ball joint kit is for DIY mechanics, rental shop technicians, and owners of mini ATVs, youth quads, go-karts and pit bikes that need a cost-effective steering-end replacement. If you operate or maintain TaoTao, Coolster, Roketa, Kazuma, Baja or similarly sourced small-displacement off-road vehicles and your steering has play or worn joints, this set supplies the common 10mm components necessary to restore tighter, safer steering without buying full OEM assemblies.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit TaoTao 110 and 125 ATVs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit is compatible with many TaoTao 110cc and 125cc ATV models that use a 10mm tie rod stud.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools do I need to install these ball joints?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic hand tools—wrenches, pliers for cotter pins, and a socket set; no special press usually required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55165904126295,"sku":"B0D8KQYKKJ","price":37.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-front-packaging-tie-rod-kit.jpg?v=1790359752"},{"product_id":"hiaors-gy6-50cc-carburetor-pd18j-replacement-for-49-50cc-scooters-with-78-jet-magnetic-fuel-filter","title":"HIAORS GY6 50cc Carburetor PD18J Replacement for 49–50cc Scooters with #78 Jet \u0026 Magnetic Fuel Filter","description":"\u003cp\u003e\u003cstrong\u003eHIAORS GY6 50cc carburetor kit is a direct-fit PD18J replacement that upgrades fuel atomization and filtration for many 49–50cc Chinese scooters and small ATVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement carburetor assembly is engineered for 139QMB\/139QMA GY6-style 4-stroke engines and is supplied with an upgraded main jet, an ABS-cased inline fuel filter with a magnet, and a resilient fuel line. It’s intended as a durable, drop-in performance and maintenance upgrade for Taotao, Jonway, Roketa, Baja and many other popular 50cc models that use the PD18J or similar carburetors.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor fit my 49cc or 50cc scooter?\u003c\/h3\u003e\n\n\u003cp\u003eCompatibility centers on the 139QMB\/139QMA family and PD18J carburetor style. If your scooter or ATV uses a GY6-type 4-stroke engine and the listed intake and airbox diameters match, this is a suitable replacement without major modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits many Taotao, Jonway, Roketa, Sunl, Vitacci, Icebear, Lance, Baja and similar 49–50cc models.\u003c\/li\u003e\n  \u003cli\u003eIntake side: inner ø 18mm \/ outer ø 28mm for clamp fit.\u003c\/li\u003e\n  \u003cli\u003eAir filter side: inner ø 35mm \/ outer ø 38mm for airbox connection.\u003c\/li\u003e\n  \u003cli\u003eDesigned for PD18J or equivalent GY6 carburetor mounts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this carburetor improve performance and reliability?\u003c\/h3\u003e\n\n\u003cp\u003eThe body is cast from lightweight aluminum alloy for strength and heat dissipation, while the larger #78 main jet improves fuel flow and atomization. Better atomization helps the engine run smoother and can enhance throttle response when the jetting suits the machine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpgraded #78 main jet for optimized air\/fuel mixing.\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy construction resists corrosion and warping.\u003c\/li\u003e\n  \u003cli\u003eSmoother idling and more consistent midrange throttle response.\u003c\/li\u003e\n  \u003cli\u003eIdle jet and tuning accessible for local altitude or fuel adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how does the fuel filter protect the engine?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit includes the PD18J-pattern carburetor, a reinforced rubber fuel line, and an ABS-housed inline fuel filter with a built-in magnet to trap metallic debris. The pleated filter element and magnetic catch work together to reduce contaminants that reach the carburetor and engine, extending component life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eABS shell fuel filter with dense pleated media for effective filtration.\u003c\/li\u003e\n  \u003cli\u003eEmbedded magnet captures metal particles before they circulate.\u003c\/li\u003e\n  \u003cli\u003eQuality rubber fuel hose resists kinking and fuel degradation.\u003c\/li\u003e\n  \u003cli\u003eAll parts designed for straightforward replacement without custom fabrication.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and tune this carburetor for best results?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is generally bolt-on where bolt patterns and diameters match; clamp the intake and airbox connections, connect the fuel line, and secure throttle linkage. After install, check for fuel leaks, then fine-tune idle and main jet as needed for local conditions and aftermarket exhaust or air filters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify intake and airbox diameter compatibility before fitting.\u003c\/li\u003e\n  \u003cli\u003eStart with supplied #78 main jet, adjust to local altitude or mods.\u003c\/li\u003e\n  \u003cli\u003eInspect for leaks, proper throttle movement, and correct float level.\u003c\/li\u003e\n  \u003cli\u003eConsider professional tuning if running performance exhaust or major mods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This HIAORS GY6 50cc carburetor kit is meant for owners of 49–50cc Chinese scooters and compact ATVs who need a reliable replacement or mild performance upgrade. It suits riders replacing a worn PD18J-style carburetor, anyone adding a better inline fuel filter with magnetic protection, or DIY mechanics who want a durable aluminum unit that’s easy to tune for local fuel and altitude.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my Taotao 50cc scooter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your Taotao uses a PD18J\/GY6 139QMB-style carb and the intake\/airbox diameters match, it’s a direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include a fuel filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — an ABS-cased inline fuel filter with pleated media and a magnetic insert is included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55165954163031,"sku":"B07X7VGDVC","price":38.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-gy6-50cc-carburetor-front-view.jpg?v=1790360091"},{"product_id":"hiaors-145-70-6-inner-tubes-pack-of-2-bent-metal-valve-stem-for-lawn-mowers-atv-go-karts-145x70-6-4-50-6-fit","title":"HIAORS 145\/70-6 Inner Tubes Pack of 2 — Bent Metal Valve Stem for Lawn Mowers ATV Go-Karts, 145X70-6 \/ 4.50-6 Fit","description":"\u003cp\u003e\u003cstrong\u003eHIAORS 145\/70-6 inner tubes are replacement bent-angle valve tubes sized to fit 145X70-6 \/ 450\/530-6 tires, sold as a convenient pack of two for utility equipment and small off‑road vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese inner tubes are built to swap into 145\/70-6 (also listed as 145X70-6 or 13x5.00-6) and common 4.50-6 \/ 5.30-6 tire sizes, providing a direct spare for lawn mowers, garden tractors, utility trailers, mini bikes, and many compact ATVs and go-karts. Each tube comes fitted with a bent (angle) metal valve stem to make inflation easier in tight wheel wells and to reduce stress at the valve base when rims or hubs are close to frame components.\u003c\/p\u003e\n\n\u003ch3\u003eWill these tubes fit my 145X70-6 or 4.50-6 tire?\u003c\/h3\u003e\n\u003cp\u003eYes — the HIAORS tubes are sized to match 145\/70-6, 145X70-6, 4.50-6 and 5.30-6 tire listings. Confirm your tire sidewall shows one of those size markings before ordering to ensure a correct match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatibility: 145\/70-6, 145X70-6, 4.50-6, 5.30-6 size ranges\u003c\/li\u003e\n  \u003cli\u003eFitment: Works with 13x5.00-6 style rims\u003c\/li\u003e\n  \u003cli\u003ePack: Sold as a set of two tubes for spares or dual-wheel needs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the bent metal valve stem help during installation and use?\u003c\/h3\u003e\n\u003cp\u003eThe bent (angled) valve stem positions the Schrader valve away from cramped wheel openings, making it easier to reach with a pump or gauge without needing to remove the wheel. The metal stem adds rigidity and resists bending when inflating, and its angle reduces rubbing against frames or hubs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEase: Easier access for pumps and gauges in tight spaces\u003c\/li\u003e\n  \u003cli\u003eDurability: Metal stem resists wear and cracking versus rubber-only valves\u003c\/li\u003e\n  \u003cli\u003eClearance: Angled placement avoids interference with forks, hubs, or fenders\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kinds of equipment can I use these inner tubes on?\u003c\/h3\u003e\n\u003cp\u003eThese tubes are designed for a wide range of small utility and recreational equipment. They're ideal for lawn and garden machines, utility trailers and carts, as well as mini bikes and small off-road quads, where that tire size is common.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLawn mowers, garden tractors, and snow blowers\u003c\/li\u003e\n  \u003cli\u003eHand trucks, wheelbarrows, yard carts, wagons and dollies\u003c\/li\u003e\n  \u003cli\u003eMini bikes, go-karts, small ATVs, generators and pressure washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before purchasing these tubes?\u003c\/h3\u003e\n\u003cp\u003eDouble-check the size printed on your tire sidewall and confirm the rim type to ensure compatibility. Also verify that an angled valve stem suits your wheel’s valve hole location so the stem won’t be obstructed once installed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect tire sidewall for matching size code (145\/70-6, 4.50-6, etc.)\u003c\/li\u003e\n  \u003cli\u003eConfirm rim valve hole accepts a bent metal valve stem\u003c\/li\u003e\n  \u003cli\u003eKeep proper inflation specs for your equipment handy when installing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: HIAORS 145\/70-6 inner tubes are a practical spare or replacement for homeowners, landscapers and hobbyists who maintain lawn tractors, trailers, mini bikes, go-karts or compact ATVs. If you need a reliable two-pack with easier valve access and broad size compatibility, these tubes are an economical, ready-to-install option for routine maintenance and quick roadside or yard repairs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these tubes compatible with 5.30-6 tires?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. HIAORS 145\/70-6 tubes also fit 5.30-6 and 4.50-6 tire sizes; confirm your tire sidewall shows a matching code.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the valve stem come angled, and is it metal?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each tube includes a bent (angled) metal valve stem to improve access and resist bending during inflation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55166117871959,"sku":"B089GN85D8","price":36.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-front-view-pack-of-two.jpg?v=1790363504"},{"product_id":"hiaors-header-exhaust-pipe-for-predator-212-196-engines-colorful-tig-welded-5-5-7hp-fit-with-gasket-heat-shield","title":"HIAORS Header Exhaust Pipe for Predator 212\/196 Engines — Colorful TIG-Welded 5.5–7hp Fit with Gasket \u0026 Heat Shield","description":"\u003cp\u003e\u003cstrong\u003eHIAORS header exhaust pipe is a direct-fit replacement for Predator 212\/196 small engines that improves exhaust flow, sound and throttle response for mini bikes and go-karts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSwap the stock muffler for this TIG-welded header to gain cleaner exhaust routing, a livelier tone and easier installation on a wide range of 5.5–7hp OHV clone engines. The kit is built to match Predator 212\/196\/224 and common GX160\/GX200 style manifolds and arrives with a gasket, mounting hardware, a heat shield tape, and useful tuning pieces so you can get back on the trail quickly.\u003c\/p\u003e\n\n\u003ch3\u003eWill this exhaust fit my Predator 212 or similar small engine?\u003c\/h3\u003e\n\u003cp\u003eYes — the design targets Predator 212-series and other popular OHV clone engines that share the same exhaust flange and bolt spacing. Before buying, compare the flange shape and bolt pattern on your engine with the product photos to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Predator 212\/196\/224 and many GX160\/GX200 clones\u003c\/li\u003e\n  \u003cli\u003eCompatible with popular mini bikes, go-karts and utility engines\u003c\/li\u003e\n  \u003cli\u003eIncludes gasket and screws for direct installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this header change performance and sound?\u003c\/h3\u003e\n\u003cp\u003eThe longer, smoother pipe reduces restrictive backpressure compared with many stock mufflers, allowing exhaust gases to exit more freely for crisper throttle response. Expect a more pronounced, sporty exhaust note without modifying the engine internals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended pipe geometry for improved scavenging\u003c\/li\u003e\n  \u003cli\u003eTIG-welded construction for consistent flow and durability\u003c\/li\u003e\n  \u003cli\u003eProduces a stronger, more aggressive tone while maintaining street-legal appearance in many jurisdictions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what tools are provided?\u003c\/h3\u003e\n\u003cp\u003eThe kit is comprehensive so you can install and tune right away. It includes mounting hardware, a gasket, a heat-shield tape to protect legs from radiant heat, a replacement spark plug, and a small carburetor main jet kit to help dial in fueling after changing exhaust flow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 exhaust pipe, 1 gasket, 2 screws and a wrench\u003c\/li\u003e\n  \u003cli\u003eHeat-shield tape plus four ties for secure placement\u003c\/li\u003e\n  \u003cli\u003eSpark plug (F7TC) and carburetor tuning kit (emulsion tube + jets 036–038\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and are safety items included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with small-engine maintenance; basic hand tools are sufficient. The included heat-shield tape and protective hardware reduce burn risk and help mount the pipe securely to frames and brackets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple bolt-on installation with supplied gasket and screws\u003c\/li\u003e\n  \u003cli\u003eHeat shield tape prevents direct contact burns to legs\u003c\/li\u003e\n  \u003cli\u003eWrench included for faster setup; check manifold fit before tightening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This header exhaust kit is suited for hobbyists, off-road riders and small-engine tinkerers who want a durable, better-flowing replacement for worn or restrictive stock exhausts. It’s tailored to owners of mini bikes, go-karts, pressure washers or other equipment powered by Predator-style 5.5–7hp OHV engines who want improved throttle response, a sportier sound and an easy installation with tuning parts included.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this header fit GX160\/GX200 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits many GX160\/GX200-style OHV clone engines that share the Predator 212 flange and bolt pattern.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need to rejet the carburetor after installing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A rejet may be recommended; the kit includes jets and an emulsion tube to help tune fuel delivery.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55166964400471,"sku":"B0D8112HDY","price":36.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-exhaust-front-view.jpg?v=1790373694"},{"product_id":"hiaors-rear-disc-brake-master-cylinder-caliper-assembly-50-125cc-atv-pre-filled-dot3-spare-pads","title":"HIAORS Rear Disc Brake Master Cylinder Caliper Assembly — 50–125cc ATV, Pre-filled DOT3 \u0026 Spare Pads","description":"\u003cp\u003e\u003cstrong\u003eHIAORS Rear Disc Brake Master Cylinder Caliper Assembly is a complete replacement rear brake kit for many 50–125cc Chinese ATV models, supplied pre-filled with DOT3 fluid and including an extra pair of pads.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one rear brake assembly pairs a hydraulic master cylinder and caliper to restore stopping power on a wide range of Chinese 4-wheelers. Built from durable materials, it arrives with one set of brake pads already installed, one spare pair, and 550 mm (21.5\") brake tubing. Use the diagrams and measurements below to confirm fitment before installation.\u003c\/p\u003e\n\n\u003ch3\u003eWill this rear brake assembly fit my ATV model?\u003c\/h3\u003e\n\u003cp\u003eCompatibility covers many popular Chinese and import quads from 50cc through 125cc, including TaoTao, Coolster, Baja, Kazuma and listed brands. Measure mounting hole spacing and compare to your current parts to be sure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaster cylinder mount center spacing: 35–56 mm (1-3\/8\"–2-3\/16\")\u003c\/li\u003e\n  \u003cli\u003eCaliper mounting hole center spacing: 63 mm (2.5\")\u003c\/li\u003e\n  \u003cli\u003eBrake tubing length: 550 mm (21.5\")\u003c\/li\u003e\n  \u003cli\u003eCommon compatible models: TaoTao Boulder B1, Coolster 3050 series, Peace 110B\/125D, Apollo Focus 125, Vitacci Rider and many others\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components and extras are included in the kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships as a ready-to-install rear hydraulic brake assembly with necessary hardware and consumables to get you back on the trail. It reduces the parts you must source separately and includes a spare set of pads for future service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × rear master cylinder with reservoir and lever\u003c\/li\u003e\n  \u003cli\u003e1 × rear hydraulic caliper with pads installed\u003c\/li\u003e\n  \u003cli\u003e1 × spare pair of replacement brake pads\u003c\/li\u003e\n  \u003cli\u003ePre-filled with DOT3 brake fluid and 21.5\" brake hose attached\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation and maintenance work?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone with basic mechanical skills and standard hand tools; you will need to check hose routing and bleed the system after mounting. Routine maintenance is limited to pad replacement and fluid checks — common to all hydraulic brake systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch mount hole spacing and hose routing to your ATV before drilling or modification\u003c\/li\u003e\n  \u003cli\u003eBleed brakes after installation to remove air and ensure firm lever feel\u003c\/li\u003e\n  \u003cli\u003eInspect pads and fluid periodically; replace pads when worn to recommended thickness\u003c\/li\u003e\n  \u003cli\u003eUse DOT3 brake fluid as supplied; follow local disposal rules for old fluid\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the technical dimensions and material notes?\u003c\/h3\u003e\n\u003cp\u003eThe assembly uses standard mounting geometries to fit many import quads and includes a 550 mm brake hose for typical rear brake routing. Materials are chosen for corrosion resistance and durability for off-road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrake tubing length: 21.5\" (550 mm)\u003c\/li\u003e\n  \u003cli\u003eMaster cylinder mount center spacing: 35–56 mm (1-3\/8\"–2-3\/16\")\u003c\/li\u003e\n  \u003cli\u003eCaliper mounting hole center spacing: 63 mm (2.5\")\u003c\/li\u003e\n  \u003cli\u003eSupplied with DOT3 brake fluid and two sets of brake pads (one installed, one spare)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders and mechanics who need a reliable, ready-to-install rear disc brake replacement for small-displacement Chinese and import ATVs. Choose this HIAORS assembly if you want a complete hydraulic rear brake with compatible dimensions, included fluid and spare pads so you can finish the job with fewer visits to parts stores. If you are unsure about fitment, measure your existing mounts and hose routing against the listed specs or contact the seller for advice before buying.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit come with brake fluid and spare pads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The assembly ships pre-filled with DOT3 fluid and includes one installed pad set plus one spare pair.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm it fits my ATV?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare your master mount (35–56 mm) and caliper mount (63 mm) spacing plus 550 mm hose length to your existing parts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55167324029271,"sku":"B07VGGZFW5","price":58.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-rear-brake-assembly-front-view.jpg?v=1790383375"},{"product_id":"hiaors-12v-tail-light-assembly-for-gy6-49-50cc-scooters-5w-brake-amber-turn-signals-148mm-mounting","title":"HIAORS 12V Tail Light Assembly for GY6 49–50cc Scooters — 5W Brake \u0026 Amber Turn Signals, 148mm Mounting","description":"\u003cp\u003e\u003cstrong\u003eHIAORS 12V 5W tail light assembly combines brake light and amber turn signals in a single, drop-in replacement designed for many 49cc–50cc GY6-style scooters and mopeds.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact lamp replaces the rear lighting cluster on a wide range of Chinese small-displacement motorcycles and scooters. Built from durable ABS plastic with clear and red lenses, the unit integrates an amber turn-signal function and a red tail\/brake output. It ships with two electrical plugs (one 5-pin and one 2-pin) and about 30 cm of wiring to simplify connection to existing harnesses. The assembly suits models from brands such as TaoTao, Roketa, Jonway, BAJA and others that use GY6-style mounts.\u003c\/p\u003e\n\n\u003ch3\u003eWill this tail light fit my scooter?\u003c\/h3\u003e\n\n\u003cp\u003eThe assembly is intended for many Chinese 49cc–50cc scooters that use the GY6 layout, but fitment depends on mounting hole spacing and connector types. Measure your existing tail light’s mounting centers and compare connectors before ordering to avoid returns.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMounting hole center-to-center: 148 mm\u003c\/li\u003e\n  \u003cli\u003eConnectors included: one 5-pin plug and one 2-pin plug\u003c\/li\u003e\n  \u003cli\u003eWire length: approximately 30 cm for easier reach to the harness\u003c\/li\u003e\n  \u003cli\u003eCommon compatible makes: TaoTao, Roketa, Jonway, BAJA, Sunl, Baccio, and similar\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools will I need?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic scooter maintenance and wiring. The assembly replaces the original rear cluster: unbolt the old unit, disconnect its plugs, fit the new light, and reconnect using the supplied plugs or splice if necessary.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTools: screwdriver or socket set for rear fasteners\u003c\/li\u003e\n  \u003cli\u003eWiring: plug-and-play where connectors match; simple splicing otherwise\u003c\/li\u003e\n  \u003cli\u003eMaterial: lightweight ABS housing helps align and bolt quickly\u003c\/li\u003e\n  \u003cli\u003eTime: typical swap takes 15–30 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the electrical and visual features?\u003c\/h3\u003e\n\n\u003cp\u003eThe lamp runs at standard 12V and uses a 5W bulb rating to provide rear illumination and turn signaling. Lenses are clear and red to separate functions visually: amber flash for turns and red for tail\/brake visibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eVoltage: 12 V, compatible with typical scooter electrical systems\u003c\/li\u003e\n  \u003cli\u003ePower: 5 W rating for the light element\u003c\/li\u003e\n  \u003cli\u003eLens colors: clear front lens with red inner for brake, amber for indicators\u003c\/li\u003e\n  \u003cli\u003eHousing: impact-resistant ABS plastic for road durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes the product arrive ready to use and what should I check on delivery?\u003c\/h3\u003e\n\n\u003cp\u003eThe package contains one complete motorcycle light assembly. On arrival, confirm the connectors match your scooter and that the 148 mm mounting spacing aligns with your frame. Note slight color variation or measurement tolerances may occur due to manufacturing and photography differences.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1x rear light assembly\u003c\/li\u003e\n  \u003cli\u003eCheck: physical condition, connector types, and mounting hole spacing\u003c\/li\u003e\n  \u003cli\u003eTolerance: small deviations in color or size may occur\u003c\/li\u003e\n  \u003cli\u003eTip: compare with original part photos before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders and mechanics seeking a robust, economical replacement rear lamp for small-displacement scooters and mopeds that use GY6-style rear mounts. It’s suited to owners of TaoTao, Roketa, Jonway, BAJA, Sunl, Baccio and other similar models who need a combined tail and turn-signal assembly with standard 12V compatibility and common connector options. If you value a simple swap that restores both brake illumination and amber signaling in one unit, this HIAORS assembly is designed to meet that need.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What connectors come with the HIAORS tail light?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It includes one 5-pin plug and one 2-pin plug; splicing may be needed if your harness differs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the mounting hole spacing standard?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the center-to-center mounting hole spacing is 148 mm; measure your original part to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55167430558039,"sku":"B08LPQQW5S","price":55.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-tail-light-front-view.jpg?v=1790386417"},{"product_id":"hiaors-aluminum-flywheel-for-predator-212-224-gx160-engines-8-timing-advance-lightweight-10k-rpm-performance","title":"HIAORS Aluminium Flywheel for Predator 212\/224\/GX160 Engines — 8° Timing Advance, Lightweight 10k RPM Performance","description":"\u003cp\u003e\u003cstrong\u003eHigh-strength HIAORS aluminum flywheel engineered to reduce drag and add performance for Predator 212\/224\/196cc and compatible GX160\/GX200 clone engines up to 10,000 rpm.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis performance flywheel replaces heavier iron or plastic stock units with a lightweight cast aluminum rotor, designed to free up horsepower by minimizing aerodynamic drag while preserving sufficient cooling airflow. It includes valve springs, a main jet kit and a hardened crankshaft key so you can immediately begin tuning or swapping for minibikes, go-karts and clone engines. The unit features an 8° built-in timing advance and durable hub threads for secure installation; note it is not compatible with Predator 212 Hemi engines.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this flywheel improve throttle response and acceleration?\u003c\/h3\u003e\n\u003cp\u003eThe HIAORS aluminum flywheel reduces rotational drag compared to stock iron or plastic flywheels, which lets the engine accelerate more freely. Less drag throughout the rev range means improved throttle response and quicker rev-up toward the engine’s higher rpm range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUltra-low drag design reduces airflow resistance at high rpm.\u003c\/li\u003e\n  \u003cli\u003eLightweight cast aluminum allows faster acceleration and cranking.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in 8° timing advance improves ignition timing without external modifications.\u003c\/li\u003e\n  \u003cli\u003eIncludes valve springs and jet kit to support tuning for better throttle feel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this flywheel fit my engine and how do I verify compatibility?\u003c\/h3\u003e\n\u003cp\u003eThe flywheel is made for a range of non-hemi Predator 212cc, 196cc and 224cc clone engines as well as GX160 and GX200 6.5hp clone-type engines and common minibike models. It is not designed for Predator Hemi heads or engines with different keyway or taper dimensions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: Predator 212\/196\/224 non-hemi, Tillotson 212, Honda GX160\/GX200 clones.\u003c\/li\u003e\n  \u003cli\u003eCommon applications: Coleman CT200U\/CT200U-EX, BT200X, Axi M200, Massimo\/Baja MB165\/MB200, KT196 go-karts.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Predator 212 Hemi engines—confirm engine head type first.\u003c\/li\u003e\n  \u003cli\u003eCheck crank taper, keyway and thread hole alignment before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what extra parts might I need?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with the aluminum flywheel plus several tuning and installation accessories so you can install and start adjusting performance right away. Additional tools and routine replacement hardware may still be needed depending on your machine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 aluminum flywheel, 2 x 26 lb valve springs, 1 main jet kit (emulsion tube + jets .036, .037, .038), 1 metal crankshaft key.\u003c\/li\u003e\n  \u003cli\u003eIncluded 8° timing advance built into the flywheel hub.\u003c\/li\u003e\n  \u003cli\u003eYou may need basic hand tools, torque wrench, and possible flywheel puller for removal.\u003c\/li\u003e\n  \u003cli\u003eOptional balancing service if surface casting marks need smoothing for high-precision builds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this flywheel durable and safe for high-rpm use?\u003c\/h3\u003e\n\u003cp\u003eConstructed from cast aluminum with reinforced hub threads and a serviceable keyway, this flywheel is built to withstand higher engine speeds while remaining lightweight. During manufacturing small casting imperfections can appear but these do not affect normal operation; balancing can further refine performance for high-rpm applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCast aluminum construction lowers weight while maintaining strength.\u003c\/li\u003e\n  \u003cli\u003eReinforced threaded hub prevents taper damage and secures fitment.\u003c\/li\u003e\n  \u003cli\u003eDesigned to support speeds up to 10,000 rpm with reduced drag characteristics.\u003c\/li\u003e\n  \u003cli\u003eMinor casting marks are cosmetic; optional balancing recommended for precision racing builds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This HIAORS aluminum flywheel is aimed at enthusiasts who want measurable performance gains on minibikes, go-karts and clone-engine projects—mechanics, DIY tuners and racers who run Predator 212cc\/196cc\/224cc non-hemi or GX160\/GX200-style engines. Choose this kit if you want a lightweight, durable replacement with included tuning parts and an integrated timing advance, and avoid it if your engine is a Predator 212 Hemi or has incompatible crankshaft taper\/keyway dimensions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this flywheel work with Predator 212 Hemi engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This HIAORS flywheel is incompatible with Predator 212 Hemi engines; it fits non-hemi 212\/196\/224 and GX160\/GX200 clones.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tuning parts come with the flywheel kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes two 26 lb valve springs, an emulsion tube with three main jets (.036, .037, .038) and a metal crankshaft key.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55167861326167,"sku":"B0CPXCLR9Q","price":60.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-aluminum-flywheel-front-view.jpg?v=1790393937"},{"product_id":"hiaors-145-70-6-tubeless-mini-bike-tire-6-rim-flame-tread-for-atv-go-kart-durability-traction","title":"HIAORS 145\/70-6 Tubeless Mini Bike Tyre — 6\" Rim, Flame Tread for ATV\/Go-Kart Durability \u0026 Traction","description":"\u003cp\u003e\u003cstrong\u003eThe HIAORS 145\/70-6 tubeless mini bike tire is a heavy-duty 6\" rim tire designed to deliver durable traction and impact resistance for small ATVs, mini bikes, and go-karts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt from reinforced rubber with a directional flame-pattern tread, this 145\/70-6 tire balances grip, shock absorption, and longevity for off-road and mixed-terrain riding. It fits many popular mini bike and small-ATV models including Coleman CC100X and CT100U, Baja Dirt Bug series, Motovox MBX models, Kazuma\/Roketa 110cc machines, and similar 6-inch rim applications. The tubeless design reduces pinch-flat risk and simplifies installation with compatible rims.\u003c\/p\u003e\n\n\u003ch3\u003eWill this tire fit my mini bike or ATV?\u003c\/h3\u003e\n\u003cp\u003eMeasure your wheel and compare model compatibility before purchase. This tire requires a 6-inch rim diameter and approximately 4.5\" rim width. Check your current tire marking or owner manual to confirm 145\/70-6 sizing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSize: 145\/70-6 (rim diameter 6\")\u003c\/li\u003e\n  \u003cli\u003eRecommended rim width: ~4.5 inches\u003c\/li\u003e\n  \u003cli\u003eCompatible models: Coleman CC100X, CT100U, Baja Dirt Bug\/DB30, Motovox MBX10\/MBX11, Kazuma\/Roketa 110cc, many Chinese mini bikes and go-karts\u003c\/li\u003e\n  \u003cli\u003eConfirm existing tire code or rim spec before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the tread perform across different surfaces?\u003c\/h3\u003e\n\u003cp\u003eThe tire’s flame-shaped directional tread is designed to bite into soft ground while shedding mud to maintain contact. On packed dirt, gravel, and mixed trails it provides predictable handling and improved braking traction. The pattern also helps reduce slippage during acceleration on uneven surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirectional flame tread enhances forward traction\u003c\/li\u003e\n  \u003cli\u003eTextured block edges improve grip on loose terrain\u003c\/li\u003e\n  \u003cli\u003eMud-shedding channels maintain rolling resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this tire durable and easy to maintain?\u003c\/h3\u003e\n\u003cp\u003eHIAORS uses a resilient rubber compound engineered for vibration resistance and flexibility under load, helping the tire tolerate impacts and uneven surfaces. The tubeless construction minimizes pinch flats and allows for easier repair with tubeless plugs when punctures occur. Routine checks of pressure and tread condition keep lifespan optimal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: reinforced rubber for strength and elasticity\u003c\/li\u003e\n  \u003cli\u003eDesign reduces pinch-flat likelihood compared to tube setups\u003c\/li\u003e\n  \u003cli\u003eSimple tubeless maintenance: pressure checks and plug repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and service?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires a compatible 6\" rim and basic tire-mounting tools or a professional shop if inexperienced. Before mounting, verify tire orientation for the directional tread and inspect rim condition. HIAORS recommends confirming size against the current tire and contacting seller support for post-sale questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMount on 6\" diameter rim, oriented to directional tread arrow\u003c\/li\u003e\n  \u003cli\u003eUse standard tubeless mounting procedures or professional help\u003c\/li\u003e\n  \u003cli\u003eSeller offers after-sale messaging for fitment or quality issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Riders and owners of small-displacement ATVs, mini bikes, pit bikes, and go-karts who need a cost-effective, tubeless replacement tire for off-road and trail use will find this HIAORS 145\/70-6 tire a practical option. It suits hobbyists, rental operations, and anyone replacing worn 6\" tires on listed models or similar equipment where a durable, all-terrain mini tire is required.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this tire fit a 6-inch rim?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the HIAORS 145\/70-6 is designed for a 6\" rim and roughly 4.5\" rim width; always confirm your rim size before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this a tubeless tire and can it be patched?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it is tubeless and can typically be repaired with tubeless plugs for small punctures; severe damage may need replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55168354353495,"sku":"B089LY44CF","price":68.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-front-view-145-70-6-tire.jpg?v=1790401474"},{"product_id":"hiaors-racing-exhaust-muffler-kit-for-predator-6-5hp-200cc-extended-header-heat-shield","title":"HIAORS Racing Exhaust Silencer Kit for Predator 6.5hp\/200cc — Extended Header \u0026 Heat Shield","description":"\u003cp\u003e\u003cstrong\u003eHIAORS Racing Exhaust Pipe Muffler Main Jet Kit is a complete replacement performance exhaust system for Predator-style 6.5hp and similar 200cc engines that improves airflow, adds heat protection, and fits many mini bikes and go-karts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit includes an extended header pipe, threaded muffler silencer, heat shield and heat-wrap, plus mounting hardware designed to work with Predator 212cc\/196cc\/224cc 6.5hp engines and a wide range of mini bike and go-kart models. The parts are welded and painted with heat-resistant finish to resist peeling, and the header pipe routing keeps the hot outlet away from riders’ legs. It’s supplied as a bolt-on kit for engines like Coleman CT200U, Baja MB165\/MB200, Harbor Freight clones and other 200cc class clones.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this muffler kit affect my mini bike or go-kart performance?\u003c\/h3\u003e\n\u003cp\u003eSwitching to this HIAORS racing exhaust can improve exhaust flow and help the engine breathe more efficiently, which often translates to smoother throttle response and modest gains in acceleration. The longer, freer-flowing pipe reduces backpressure compared with restrictive stock units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended header improves exhaust scavenging for better throttle response\u003c\/li\u003e\n  \u003cli\u003eWelded joints and smooth threads keep airflow consistent\u003c\/li\u003e\n  \u003cli\u003eDesigned for 6.5hp\/200cc Predator-style engines and clones\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the kit protect me from burns and fit under the seat?\u003c\/h3\u003e\n\u003cp\u003eThe header pipe is routed long enough to pass under the seat and point the outlet downward, distancing the hot muffler from the rider. HIAORS includes an extra heat-wrap roll and a heat shield to further reduce radiant heat and protect legs and nearby components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLong under-seat routing lowers contact risk with rider’s legs\u003c\/li\u003e\n  \u003cli\u003eIncluded heat-wrap roll for insulating the header pipe\u003c\/li\u003e\n  \u003cli\u003eStamped heat shield adds a metal barrier between pipe and seat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is the installation and will it stay tight during use?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: thread the muffler into the header pipe, secure with the supplied explosion-proof nut, and bolt the header to your engine. The kit’s smooth threads and one-piece welded muffler provide a snug mechanical fit that resists loosening under vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThreaded muffler silencer screws into the header pipe for quick assembly\u003c\/li\u003e\n  \u003cli\u003eIncludes a durable explosion-proof nut to lock the muffler in place\u003c\/li\u003e\n  \u003cli\u003eDesigned for bolt-on fitment on most Predator-style 200cc engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat finish and durability features does this exhaust have?\u003c\/h3\u003e\n\u003cp\u003eHIAORS applies a heat-resistant baking paint finish that resists blistering and peeling under high temperatures and road use. The visible welds are reinforced for durability, and the materials are selected to withstand normal off-road and recreational riding conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-resistant baked paint keeps the surface looking durable\u003c\/li\u003e\n  \u003cli\u003eStrong, consistent welding reduces risk of cracks or leaks\u003c\/li\u003e\n  \u003cli\u003eComponents sized for everyday recreational and light‑performance use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This HIAORS racing exhaust muffler kit is aimed at hobbyists, mini bike and go-kart owners, and small-engine tuners who run Predator 212cc\/196cc\/224cc or similar 6.5hp engines and want a bolt-on upgrade for improved flow, reduced leg heat, and a durable finish. It suits Coleman CT200U and clone engines, Baja\/Massimo mini bikes, Harbor Freight and other 200cc-class machines where a longer under-seat exhaust and added heat protection are desirable.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my Predator 212cc engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit is designed for Predator 212cc\/196cc\/224cc 6.5hp engines and many 200cc-class clones, including common Coleman and Harbor Freight models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include heat protection?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it includes a stamped heat shield and an extra heat-wrap roll to reduce radiant heat and protect legs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55168518029655,"sku":"B0CP8SP5HW","price":69.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-muffler-front-view.jpg?v=1790406338"},{"product_id":"hiaors-12-5x2-75-dirt-bike-tires-inner-tubes-2-pack-heavy-duty-butyl-reinforced-nylon","title":"HIAORS 12.5x2.75 Dirt Bike Tyres \u0026 Inner Tubes — 2-Pack, Heavy-Duty Butyl \u0026 Reinforced Nylon","description":"\u003cb\u003eHIAORS 12.5x2.75 dirt bike tires and inner tubes are a two-piece replacement set designed to restore traction, puncture resistance, and ride comfort for small electric dirt bikes, scooters, and mini pit bikes.\u003c\/b\u003e\n\n\u003cp\u003eThis complete 2-pack includes two 12.5 x 2.75 tires and two matching butyl inner tubes plus an emergency repair kit so you can replace worn or damaged rubber quickly. The construction mixes reinforced nylon components in the tire carcass with durable butyl inner tubes to increase heat tolerance, air retention, and resistance to punctures. The tread pattern channels water and debris for improved grip on loose surfaces common to backyard, neighborhood, and park riding.\u003c\/p\u003e\n\n\u003ch3\u003eWhat vehicles and models will these 12.5x2.75 tires work with?\u003c\/h3\u003e\n\u003cp\u003eThese tires are built to fit a broad range of small electric and gas-powered bikes that specify a 12.5 x 2.75 size. The listing covers many popular adult and youth models, so they’re a convenient universal replacement for several manufacturers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRazor MX350, MX400, ZR350, SX350 and Dirt Rocket variants\u003c\/li\u003e\n  \u003cli\u003eX-Treme X-560, Ezip\/IZIP 500–750 series and select Schwinn\/Mongoose models\u003c\/li\u003e\n  \u003cli\u003eMini dirt bikes like Burroma TT250 and small 47–49cc 2-stroke pit bikes\u003c\/li\u003e\n  \u003cli\u003eOther scooters and small motorcycles with 12.5x2.75 wheel specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these tires improve durability and ride control?\u003c\/h3\u003e\n\u003cp\u003eHIAORS tires pair a reinforced carcass with butyl inner tubes to reduce common failures during off-road use. The added nylon layers strengthen the tire against heat and tearing while the butyl tubes hold air longer than natural rubber, stabilizing pressure under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced nylon ply increases puncture and heat resistance\u003c\/li\u003e\n  \u003cli\u003eButyl inner tubes offer superior air retention and tear strength\u003c\/li\u003e\n  \u003cli\u003eShock-absorbing rubber formulation smooths uneven terrain impacts\u003c\/li\u003e\n  \u003cli\u003eGrooved tread sheds water and debris for consistent traction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and repairs are included for roadside fixes?\u003c\/h3\u003e\n\u003cp\u003eEach set ships with a compact repair kit so you can address common punctures and valve issues without searching for parts. The included items let you patch tubes and replace valve cores quickly, getting you back on the trail or commuting route with minimal downtime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eValve core wrench and two brass valve cores for quick replacement\u003c\/li\u003e\n  \u003cli\u003eSix self-adhesive round patches for inner tube repairs\u003c\/li\u003e\n  \u003cli\u003eMetal cleaning rasp to prepare puncture areas for patching\u003c\/li\u003e\n  \u003cli\u003eMultiple valve caps and essential mounting accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the tread perform on mixed surfaces like mud, sand, and gravel?\u003c\/h3\u003e\n\u003cp\u003eThe tread uses angled grooves to evacuate water and maintain bite on loose ground, balancing rolling resistance with grip. That makes these tires suitable for light off-road use where surface conditions change frequently.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGrooved pattern channels water for better wet traction\u003c\/li\u003e\n  \u003cli\u003eBlock spacing reduces clogging in muddy conditions\u003c\/li\u003e\n  \u003cli\u003eRaised edges improve cornering grip on gravel and packed dirt\u003c\/li\u003e\n  \u003cli\u003eDesign tuned for both durability and comfortable rolling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders who need a dependable replacement set for small electric dirt bikes, mini motorcycles, and scooters that use a 12.5 x 2.75 wheel. It’s ideal for hobbyists, commuters with small e-scooters, and parents maintaining youth dirt bikes — anyone who wants reinforced construction, better air retention, and a ready-to-use repair kit in one package.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these tires fit my Razor MX350?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the HIAORS 12.5x2.75 tires are listed as compatible with Razor MX350 and similar Razor MX-series models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are inner tubes included and what type are they?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — two butyl inner tubes are included; butyl offers better air retention and tear resistance than natural rubber.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55168992117079,"sku":"B0FSRZY71W","price":69.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-front-view-tires-packaging.jpg?v=1790416447"},{"product_id":"hiaors-pwk-24mm-carburetor-for-predator-212-196-224cc-anodized-aluminum-d-slide","title":"HIAORS PWK 24mm Carburetor for Predator 212\/196\/224cc - Anodized Aluminium, D-Slide","description":"\u003cp\u003e\u003cstrong\u003eHIAORS PWK 24mm carburetor is a flat-slide replacement carburetor engineered to boost throttle response and tuneability for Predator 212\/196\/224cc-style and many 6.5HP clone small engines and mini bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis precision-cast PWK24 throttle assembly is designed as a bolt-on performance upgrade for a wide range of OHV clone engines and popular mini-bike models. Built from anodized aluminum and supplied with interchangeable jets, the carburetor combines improved airflow geometry with a D-shaped slide for crisper throttle feel, simplified tuning, and robust corrosion resistance for harsh riding conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the PWK 24mm improve engine response?\u003c\/h3\u003e\n\u003cp\u003eThe flat (D-shaped) slide and horn-style inlet reduce turbulence and promote smoother, faster air movement into the intake. That translates to quicker throttle transitions and more consistent mid-range power delivery without major internal engine changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother airflow from horn-shaped inlet\u003c\/li\u003e\n  \u003cli\u003eD-shaped slide for better flow characteristics than round slides\u003c\/li\u003e\n  \u003cli\u003eMain jets included for fine fuel-ratio adjustments\u003c\/li\u003e\n  \u003cli\u003eImproved atomization for more consistent combustion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat engines and bikes will this carburetor fit?\u003c\/h3\u003e\n\u003cp\u003eThis PWK24 is made to work with many 6.5HP clone engines and commonly referenced small OHV engines, plus a variety of mini-bike frames. Referencing common clones and models helps determine fitment, but minor intake manifold or adapter differences may require a gasket or shim.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Predator 212\/196\/224cc and similar 6.5HP clone engines\u003c\/li\u003e\n  \u003cli\u003eFits Coleman CT200U series, BT200X, CT200U-EX and related mini bikes\u003c\/li\u003e\n  \u003cli\u003eWorks with Baja Warrior, Massimo, TrailMaster and similar MB200-style bikes\u003c\/li\u003e\n  \u003cli\u003eAdapters or manifold gaskets may be needed for exact sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build details affect durability?\u003c\/h3\u003e\n\u003cp\u003eThe body is crafted from aluminum alloy and treated with anodic oxidation to resist corrosion and wear. The tougher surface finish helps the carburetor withstand vibration, outdoor storage, and repeated servicing without prematurely degrading.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAnodized aluminum alloy body for corrosion and wear resistance\u003c\/li\u003e\n  \u003cli\u003eMachined internal bore for consistent slide movement\u003c\/li\u003e\n  \u003cli\u003eSturdy throttle and choke mounting points for reliable control\u003c\/li\u003e\n  \u003cli\u003eReplaceable jets allow long-term tuning without replacing the unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I tune and maintain the PWK24 for best results?\u003c\/h3\u003e\n\u003cp\u003eBasic tuning uses the supplied main jets and the adjustable air-fuel mixture screw to match riding conditions and fuel quality. Regular maintenance—cleaning the bowl, inspecting the needle\/ seat, and checking choke operation—keeps the carburetor performing reliably.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStart with supplied jets and use mixture screw for fine adjustments\u003c\/li\u003e\n  \u003cli\u003eCheck and clean float bowl and pilot jet periodically\u003c\/li\u003e\n  \u003cli\u003eInspect throttle slide and needle for wear or deposits\u003c\/li\u003e\n  \u003cli\u003eUse proper manifold gaskets to avoid air leaks during tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders and DIY mechanics upgrading mini bikes, go-peds, or small OHV clone-engined machines who want sharper throttle response and more tunability than stock round-slide carbs provide. It suits enthusiasts replacing worn factory carbs, small engine tuners seeking a simple bolt-on performance path, and workshop owners who need a durable, serviceable carburetor that accepts multiple jet sizes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this PWK 24mm bolt directly onto a Predator 212cc engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Often yes for many Predator-style clone mounts, but you may need a specific gasket or adapter for exact sealing and alignment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include jets for tuning?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the carburetor ships with main jets to help you tune air-fuel ratios for different conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55170243526999,"sku":"B0CQ83T8PV","price":82.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-pwk24-front-profile.jpg?v=1790425851"},{"product_id":"hiaors-3-00-12-80-100-12-rear-dirt-bike-tire-inner-tube-for-90cc-125cc-bikes-deep-tread-puncture-resistant","title":"HIAORS 3.00-12 \/ 80\/100-12 Rear Dirt Bike Tyre \u0026 Inner Tube for 90cc–125cc Bikes — Deep Tread, Puncture-Resistant","description":"\u003cp\u003e\u003cstrong\u003eThe HIAORS 3.00-12 80\/100-12 rear dirt bike tire and matching inner tube provide a durable, grippy replacement designed for 12\" rims on 90cc–125cc off-road motorcycles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you ride trails, practice in sandy tracks or need a reliable spare for weekend motos, this HIAORS combo is built to restore traction and airtight performance quickly. The set pairs a deep-tread rubber tire with a compatible 12\" inner tube so you get both fit and function in one purchase. Below are concise answers to common buyer questions covering fitment, construction, traction and installation details.\u003c\/p\u003e\n\n\u003ch3\u003eWhich motorcycles and wheel sizes will this tire and tube fit?\u003c\/h3\u003e\n\u003cp\u003eThis 80\/100-12 (3.00-12) rear tire is made for 12-inch rims and is compatible with many small-displacement dirt bikes and pit bikes. Confirm your bike’s rear rim diameter and tire width before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 12\" rims with tire width around 3.00 (80\/100-12 sizing)\u003c\/li\u003e\n  \u003cli\u003eCommon compatible models: 90cc–125cc kids’ and pit bikes, including XR70, CRF70, PW80, TTR90, TTR110, KX65, SSR125 and many TaoTao\/Coolster\/Baja variants\u003c\/li\u003e\n  \u003cli\u003eAlso fits other 12\" wheel hub tubes like 2.50-12 and 2.75-12 sizes listed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the construction different from a basic replacement tire?\u003c\/h3\u003e\n\u003cp\u003eHIAORS uses a denser rubber compound for better impact absorption and improved airtightness in the included inner tube. The design emphasizes long-wearing properties without sacrificing ride comfort on rough terrain.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRubber compound formulated for shock absorption and puncture resistance\u003c\/li\u003e\n  \u003cli\u003eInner tube made to maintain air pressure and reduce leakage risk\u003c\/li\u003e\n  \u003cli\u003eManufactured to balance durability with predictable handling characteristics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kind of traction and conditions is this tire suited for?\u003c\/h3\u003e\n\u003cp\u003eThe tread pattern is cut deep to channel mud and water and to bite into loose surfaces, giving predictable grip across many off-road conditions. It’s suitable for recreational trail use, motocross practice and mixed-surface riding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDeep lug pattern for improved bite on dirt, sand and loose gravel\u003c\/li\u003e\n  \u003cli\u003eTread channels to help evacuate water and reduce slipping on wet sections\u003c\/li\u003e\n  \u003cli\u003eEngineered to perform on mixed surfaces like mud, sand, rocks and hardpack\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain this tire and inner tube set?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard 12\" dirt bike tire procedures; check bead seating and tube orientation to avoid pinching. Routine inspections and correct inflation will extend service life and reduce the risk of flats.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMount on a 12\" rim, ensure proper bead seating and torque axle to spec\u003c\/li\u003e\n  \u003cli\u003eInflate to the manufacturer-recommended PSI for your bike and load\u003c\/li\u003e\n  \u003cli\u003eInspect for punctures, sidewall damage and tread wear before each ride\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis HIAORS 3.00-12 80\/100-12 rear tire and inner tube combo is ideal for riders restoring stock-sized rear wheels on small-displacement dirt bikes or keeping a reliable spare for off-road outings. It suits parents maintaining youth bikes, hobbyists upgrading worn tires, and track riders who need a predictable, grippy replacement for mixed-terrain riding. Always confirm rim diameter and tire width compatibility with your bike’s specifications before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this tire fit my 110cc pit bike?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your bike uses a 12\" rear rim and stock sizing around 80\/100-12 (3.00-12), this HIAORS set will fit. Verify rim diameter before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the inner tube come pre-installed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the inner tube is supplied separately; you’ll need to mount and seat it correctly during installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55170348843351,"sku":"B08JLTD2QL","price":85.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-front-packaging-3.00-12-tire.jpg?v=1790428340"},{"product_id":"hiaors-pwk-24mm-flat-slide-carburetor-throttle-assembly-24mm-pwk-for-predator-gx-clone-engines-adjustable-mixture","title":"HIAORS PWK 24mm Flat-Slide Carburetor Throttle Assembly — 24mm PWK for Predator\/GX Clone Engines, Adjustable Mixture","description":"\u003cp\u003e\u003cstrong\u003eThe HIAORS PWK 24mm flat-slide carburetor throttle assembly is a performance replacement designed to boost throttle response and tuneability on 196–224cc Predator, Honda GX clone and similar small OHV engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a direct-fit carburetor upgrade for mini bikes, go-karts, or utility engines running Predator 212\/196\/224cc, GX160\/GX200 6.5HP clones and other OHV clone platforms, this PWK24 unit offers a balance of airflow, adjustability and durable construction. It ships as a throttle assembly compatible with many CT200, BT200X, MB200 and similar models and includes features aimed at improving mixture control and rideability without major modifications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the PWK 24mm improve throttle response?\u003c\/h3\u003e\n\u003cp\u003eThe PWK24 uses a D-shaped flat slide and a horn-style air inlet to reduce turbulence and promote smoother airflow into the venturi. That design gives more consistent throttle opening characteristics and faster engine response across the rev range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlat-slide D-shaped throttle for improved flow characteristics and consistent response\u003c\/li\u003e\n  \u003cli\u003eHorn-shaped air inlet to smooth incoming air and reduce turbulence\u003c\/li\u003e\n  \u003cli\u003eAdjustable mixture and available main jet kit for fine-tuning performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this carburetor fit my Predator, GX clone or mini bike?\u003c\/h3\u003e\n\u003cp\u003eThe PWK 24mm is built to fit a wide range of small OHV clone engines and many popular mini-bike models. Check your intake flange dimensions and throttle linkage; it commonly fits Predator 212\/196\/224cc, GX160\/GX200 clones and model lines like Coleman CT200U, RT200 and MB200 variants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible engines: Predator 212\/196\/224cc, Hond* GX160\/GX200 6.5HP clones, Tillotson, DuroMa*, Hisu* and other OHV clones\u003c\/li\u003e\n  \u003cli\u003eCommon vehicles: Coleman CT200U\/BT200X, Baja Warrior MB165\/MB200, Massimo MB200, TrailMaster\/Interceptor MB200 series\u003c\/li\u003e\n  \u003cli\u003eConfirm fit: verify throttle cable orientation, intake flange size and mounting bolt pattern before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction features enhance durability?\u003c\/h3\u003e\n\u003cp\u003eThis HIAORS PWK24 is manufactured from aluminum alloy and finished with anodic oxidation to resist corrosion and wear. The build prioritizes heat resistance and hardness so it stands up to repeated use and exposure to fuel and elements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy body for light weight and strength\u003c\/li\u003e\n  \u003cli\u003eAnodic oxidation finish for improved corrosion and wear resistance\u003c\/li\u003e\n  \u003cli\u003eRobust slide design to maintain consistent sealing and movement under stress\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can I tune this carburetor for better economy or power?\u003c\/h3\u003e\n\u003cp\u003eThe PWK24 accepts different jets and allows air-fuel ratio adjustments to suit riding conditions and fuel types. Swapping main jets and adjusting the pilot screw provides measurable changes to throttle response, idle quality and fuel consumption.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse supplied jet kit or recommended main jets to tailor fuel mixture\u003c\/li\u003e\n  \u003cli\u003eAdjust pilot screw for low-speed smoothness; main jet for top-end richness\u003c\/li\u003e\n  \u003cli\u003ePerform step-by-step tuning: baseline, small changes, road\/test loop, re-check\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: riders, tinkerers and small-engine owners who want a straightforward, performance-minded carburetor swap for mini bikes, go-karts and clone-engine projects. It suits people comfortable verifying fitment and performing basic jetting and throttle-cable adjustments, and those seeking improved throttle feel and tuning flexibility without replacing the entire engine.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the PWK 24mm compatible with Predator 212cc engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The PWK24 is compatible with Predator 212cc and other 196–224cc OHV clone engines when flange and linkage match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include jets for tuning?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It accepts a main jet kit and commonly comes with pilot\/main jets or supports easy jet swaps for tuning.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HIAORS","offers":[{"title":"Default Title","offer_id":55171556376919,"sku":"B0CQ813375","price":82.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hiaors-pwk24-front-view.jpg?v=1790448085"}],"url":"https:\/\/britishgarage.co.uk\/collections\/hiaors.oembed","provider":"British Garage","version":"1.0","type":"link"}