{"title":"HNeekyr","description":"\u003cp\u003eBrowse 22 HNeekyr products at British Garage, including body \u0026amp; trim parts, headlights \u0026amp; tail light units and starters \u0026amp; alternators. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked UK delivery on every order and 30-day returns.\u003c\/p\u003e","products":[{"product_id":"hneekyr-ls-rear-main-cover-alignment-tool-seal-installer-billet-guide-for-gm-ls-engines-seal-friendly-fit","title":"HNeekyr LS Rear Main Cover Alignment Tool \u0026 Seal Installer - Billet Guide for GM LS Engines, Seal-Friendly Fit","description":"\u003cp\u003e\u003cstrong\u003eHNeekyr's LS rear main cover alignment tool and seal installer is a billet alignment guide that positions the rear cover and presses the crankshaft rear seal into GM LS-series engines for an accurate, leak-minimizing fit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen rebuilding or servicing GM LS engines, getting the rear main cover and crankshaft seal seated perfectly is essential to avoid oil leaks and rework. The HNeekyr LS Rear Main Cover Alignment Tool \u0026amp; Seal Installer is machined for stability and repeatable positioning across a wide range of LS-family blocks, reducing installation time and the chance of damaged seals during assembly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the tool improve rear cover alignment?\u003c\/h3\u003e\n\u003cp\u003eThe alignment guide indexes to factory mounting points and holds the rear cover in the correct orientation while you torque fasteners, eliminating guesswork. That steady positioning prevents uneven gaps and helps the sealing surface mate cleanly with the crankcase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMachined billet design resists flex under torque\u003c\/li\u003e\n  \u003cli\u003eIndexes to LS bolt pattern for repeatable alignment\u003c\/li\u003e\n  \u003cli\u003ePrevents cover twist that can pinch or mis-seat seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this tool install the rear main seal without damaging it?\u003c\/h3\u003e\n\u003cp\u003eYes — the tool doubles as a seal installer, applying even pressure around the seal perimeter during seating. This controlled press reduces the risk of tearing, folding, or uneven insertion that leads to premature leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to center the seal on the crankshaft bore\u003c\/li\u003e\n  \u003cli\u003eEvenly distributes installation force to avoid seal distortion\u003c\/li\u003e\n  \u003cli\u003eSuits common GM LS seal sizes for a precise fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich engines and models are compatible with this kit?\u003c\/h3\u003e\n\u003cp\u003eThe HNeekyr alignment tool is compatible with a broad range of GM LS engines, including small- and big-block LS variants commonly used in street, race, and swap applications. It covers popular factory blocks so you can use the same tool for multiple projects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with LS engines: 4.8, 5.3, 5.7, 6.0\u003c\/li\u003e\n  \u003cli\u003eFits LS1, LS2, LS3, LS6, LS4, LS9, LSA, LQ4, LQ9, L76, L99, L92 blocks\u003c\/li\u003e\n  \u003cli\u003eWorks for rebuilds, conversions, and maintenance tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to use for a home mechanic?\u003c\/h3\u003e\n\u003cp\u003eThe tool is straightforward to operate with basic hand tools — no specialty presses required. An installer can align and seat the rear main cover and seal in minutes, saving time and avoiding the frustration of trial-and-error positioning.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-piece billet tool included in the package\u003c\/li\u003e\n  \u003cli\u003eSimple installation steps suitable for DIY shops\u003c\/li\u003e\n  \u003cli\u003eRequires only standard sockets, torque wrench, and hand tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The HNeekyr LS Rear Main Cover Alignment Tool \u0026amp; Seal Installer is aimed at professional engine builders, backyard mechanics, and vehicle restorers who work on GM LS-series engines and want a reliable, reusable tool for accurate rear cover seating. If you service multiple LS blocks or perform engine swaps, this tool reduces installation errors, protects seals during fitment, and speeds up rebuilds without needing costly presses or jigs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this tool compatible with LS swap blocks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits a wide range of GM LS-series blocks and is suitable for many LS swap and rebuild applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include the seal?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The kit includes one billet rear cover alignment tool; seals must be purchased separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55162144096599,"sku":"B0CNJJ3HGD","price":29.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-front-view-rear-cover-alignment-tool.jpg?v=1790335032"},{"product_id":"hneekyr-trailer-tandem-slide-stopper-locking-pin-white-zinc-2-125-flange-heavy-duty","title":"HNeekyr Trailer Tandem Slide Stopper Locking Pin — White Zinc 2.125\" Flange, Heavy‑Duty","description":"\u003cp\u003e\u003cstrong\u003eThe HNeekyr Trailer Tandem Slide Stopper is a heavy-duty locking pin designed to secure and position a semi-trailer's sliding tandem axle for safer load distribution and stable towing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered for professional trucking and fleet use, the HNeekyr Tandem Slide Stopper provides a simple, robust way to lock a trailer's sliding mechanism. Constructed from heavy steel with white zinc plating, this tool resists corrosion while delivering the strength needed to hold axle positions under highway loads. It installs quickly into standard slider holes and works as an auxiliary device to help drivers fine-tune axle placement for balance and compliance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the HNeekyr Slide Stopper secure a tandem slider?\u003c\/h3\u003e\n\u003cp\u003eThe stopper uses a tapered shaft and flange to drop into a slider hole and lock the slider in place. Once the handle is released, the dowel engages a hole in the slider series so the parking brake and trailer slide remain secure during transit or staging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlange diameter: 2.125 inches for positive seating\u003c\/li\u003e\n  \u003cli\u003eShaft taper diameter: 1.31\" to 1.47\" to fit common slider bores\u003c\/li\u003e\n  \u003cli\u003eWhite zinc plating for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eOne-piece heavy-duty steel construction for strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and removal in the yard?\u003c\/h3\u003e\n\u003cp\u003eInstallation is a straightforward four-step process that most drivers can complete without tools. Insert the slider into the hole, release the parking brake and slide until the dowel contacts the hole, then release the handle so the dowel drops into place; removal reverses the steps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInsert tandem slider into target hole\u003c\/li\u003e\n  \u003cli\u003eRelease parking brake, slide trailer until dowel contacts hole\u003c\/li\u003e\n  \u003cli\u003eRelease handle to lock; lift handle to remove\u003c\/li\u003e\n  \u003cli\u003eCompact design for quick handling and storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat measurements and specs should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eConfirm your trailer slider hole dimensions and required flange seating to ensure a secure fit. The HNeekyr slide stopper’s listed flange and shaft diameters accommodate many standard tandem slider systems, but verifying compatibility avoids fit issues on installation day.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlange diameter: 2.125 inches\u003c\/li\u003e\n  \u003cli\u003eShaft taper: 1.31\"–1.47\" for common slider hole sizes\u003c\/li\u003e\n  \u003cli\u003eOverall height: 2.5 inches for proper engagement depth\u003c\/li\u003e\n  \u003cli\u003eSold as a single stopper per package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this tool improve trailer handling and safety?\u003c\/h3\u003e\n\u003cp\u003eUsing a dedicated slide stopper helps drivers position axles to better distribute load weight, reducing sway and uneven tire wear. Proper axle placement can enhance stability during hauling and make compliance checks quicker when adjusting for varying cargo weights.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnables precise axle positioning for balanced loads\u003c\/li\u003e\n  \u003cli\u003eReduces slider movement during stops and maneuvers\u003c\/li\u003e\n  \u003cli\u003eDurable materials withstand repeated insertion and removal\u003c\/li\u003e\n  \u003cli\u003eWhite zinc finish slows corrosion in outdoor conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: Drivers, owner-operators, and fleet maintenance teams who need a reliable, easy-to-use locking pin for tandem slider systems. If you routinely adjust trailer axles to meet hauling requirements, perform frequent coupling\/uncoupling, or maintain trailers in outdoor environments, the HNeekyr Tandem Slide Stopper offers a compact, heavy-duty solution to help secure slider positions quickly and consistently.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this stopper fit my trailer slider holes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check that your slider bore accepts a tapered shaft between 1.31\" and 1.47\" and a 2.125\" flange; those are the HNeekyr dimensions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the HNeekyr stopper corrosion resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s white zinc plated to resist rust and extend service life in outdoor conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55162525253975,"sku":"B0CM5KN45H","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-front-view.jpg?v=1790337047"},{"product_id":"hneekyr-t-post-puller-plate-bright-orange-heavy-duty-carbon-steel-powder-coated-durability","title":"HNeekyr T-Post Puller Plate Bright Orange — Heavy-Duty Carbon Steel, Powder-Coated Durability","description":"\u003cstrong\u003eHNeekyr T Post Puller Plate is a heavy-duty carbon steel attachment that lets you extract T-posts quickly and safely using chains, S-hooks, jacks, or tractor buckets.\u003c\/strong\u003e\n\n\u003cp\u003eIf you install and remove fence posts, boundary stakes, or temporary site posts, this removable T-post puller plate simplifies extraction from compacted or dry soil. Built from thicker carbon steel than common consumer options and finished with a protective black powder coat, the plate is designed to resist bending, rust, and slippage while delivering reliable load-bearing performance on farms, construction sites, and yards.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the HNeekyr plate attach and work with existing equipment?\u003c\/h3\u003e\n\u003cp\u003eThe plate is engineered as a removable puller that connects to chains, S-hooks, vehicle hitches, jacks, or tractor buckets so you can lever and lift posts without manual digging. Its shape grips T-post heads securely during vertical extraction, transferring force evenly to minimize post damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits common chains, S-hooks, and grab points for mechanical pulling.\u003c\/li\u003e\n  \u003cli\u003eCompatible with tractors and loaders that can lift or apply steady upward force.\u003c\/li\u003e\n  \u003cli\u003eWorks with farm jacks or hand jacks to pull posts straight up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this puller plate durable and rust-resistant?\u003c\/h3\u003e\n\u003cp\u003eHNeekyr uses heavy-gauge carbon steel thicker than many aftermarket plates, offering greater hardness and load capacity. The black powder-coat finish protects the metal from moisture and abrasion, extending service life in outdoor conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThick carbon steel body resists bending under tension.\u003c\/li\u003e\n  \u003cli\u003ePowder-coated surface reduces corrosion and chipping.\u003c\/li\u003e\n  \u003cli\u003eHigh hardness and load-bearing capacity for repeated use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to use the T-post puller without damaging the post?\u003c\/h3\u003e\n\u003cp\u003eThe plate’s contact geometry helps distribute extraction forces so the post lifts straight instead of bending or twisting. That means you can often reuse posts after removal and avoid cutting or damaging them during service operations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to engage the post head for vertical lift and minimal distortion.\u003c\/li\u003e\n  \u003cli\u003eWorks with mechanical lifting devices to reduce manual labor.\u003c\/li\u003e\n  \u003cli\u003eIdeal for dry, compacted ground where posts are tightly seated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what are the practical limits?\u003c\/h3\u003e\n\u003cp\u003eEach order ships one HNeekyr T Post Puller Plate in bright orange for visibility on worksites. While the plate is built for heavy-duty pulling, match attachment hardware and lifting equipment capacity to the soil conditions and post size before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes one orange puller plate ready to attach to standard connectors.\u003c\/li\u003e\n  \u003cli\u003eNot a standalone jack — requires compatible chains, hooks, or lifting gear.\u003c\/li\u003e\n  \u003cli\u003eBest used with rated lifting equipment appropriate for post resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Landscapers, ranchers, contractors, and homeowners who remove T-posts regularly will benefit most from the HNeekyr T Post Puller Plate. It’s aimed at people who need a rugged, reusable extraction tool that pairs with existing lifting gear to speed up fence removal and reduce manual strain while protecting posts for reuse.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this plate work with my tractor bucket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it links to chains or hooks that mount to tractor buckets, provided your bucket or hitch can apply vertical lift safely.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include all mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the package contains one puller plate; chains, S-hooks, and lifting equipment are sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55162589577559,"sku":"B0CKDZC59S","price":45.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-front-view-puller-plate.jpg?v=1790337547"},{"product_id":"hneekyr-12v-reversing-winch-solenoid-6-terminal-dc-contactor-relay-direct-fit-copper-contacts","title":"HNeekyr 12V Reversing Winch Solenoid 6-Terminal DC Contactor Relay — Direct-Fit, Copper Contacts","description":"\u003cp\u003e\u003cstrong\u003eHNeekyr's 12V 6-terminal reversing solenoid is a direct-fit replacement contactor relay that restores proper reversing and starting function to permanent-magnet winch and accessory motors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty DC contactor is designed for intermittent-duty applications where dependable switching under load matters. Built from durable plastics and copper contacts, the unit replaces worn or faulty solenoids that cause motors to fail to start, spin continuously, or behave erratically after engine ignition. It supports a wide range of equipment including winches, snow-plow motors, spreaders, windlasses and hydraulic pump motors — provided those motors use permanent magnets rather than field windings.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this solenoid fix my winch that won’t reverse?\u003c\/h3\u003e\n\u003cp\u003eThe reversing solenoid replaces the original switching device that routes current to the motor for forward and reverse operation. A new contactor restores clean, solid connections so the motor receives proper polarity and can change direction reliably.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for common part numbers (e.g., 24450BX, 214-1211A11 variants)\u003c\/li\u003e\n  \u003cli\u003e6-terminal layout matches original wiring for plug-and-play swaps\u003c\/li\u003e\n  \u003cli\u003eCopper contacts reduce voltage drop and improve switching under load\u003c\/li\u003e\n  \u003cli\u003eDesigned for intermittent duty found in winch and plow use cases\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this solenoid easy to install on my vehicle or equipment?\u003c\/h3\u003e\n\u003cp\u003eYes — the HNeekyr solenoid is built for simple installation with no drilling or cutting required. Most replacements take only a few minutes using basic hand tools and by following the original wiring layout.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6 clearly labeled terminals to match existing harnesses\u003c\/li\u003e\n  \u003cli\u003eMounting points align with common winch and motor brackets\u003c\/li\u003e\n  \u003cli\u003ePre-formed plastic housing for quick swap-out durability\u003c\/li\u003e\n  \u003cli\u003eComes as a single unit—ready to install out of the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich motors and part numbers are compatible with this contactor?\u003c\/h3\u003e\n\u003cp\u003eThis relay is intended for permanent-magnet motors and is compatible with many aftermarket and OEM accessory motors. It replaces several factory part numbers and works across multiple applications when the motor design matches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces: 24450BX, 214-1211A11, 214-1231-A11, 2141211A51, 2141211A61, 214-1211A11-06\u003c\/li\u003e\n  \u003cli\u003eFits winch motors, snow plow motors, spreader motors and windlasses\u003c\/li\u003e\n  \u003cli\u003eNot suitable for motors with traditional copper-wound field coils\u003c\/li\u003e\n  \u003cli\u003e12V DC rated for intermittent duty switching\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and durability highlights?\u003c\/h3\u003e\n\u003cp\u003eThe HNeekyr solenoid uses robust materials chosen for outdoor and heavy-use environments. Corrosion-resistant contact surfaces and a rugged housing extend service life where moisture, vibration and temperature swings are common.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable plastic body resists impact and weather exposure\u003c\/li\u003e\n  \u003cli\u003eCopper contact elements reduce wear and resist rusting\u003c\/li\u003e\n  \u003cli\u003eEngineered for reliable intermittent-duty performance\u003c\/li\u003e\n  \u003cli\u003eCompact design retains compatibility with tight mounting spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This reversing solenoid is aimed at vehicle owners, fleet technicians and equipment mechanics who need a dependable replacement for failed winch or accessory motor solenoids. It's ideal for those who want a plug-and-play repair to restore reversing and starting functions on 12V permanent-magnet motors used in off-road winches, snow-plow systems, spreaders, marine windlasses and hydraulic pump drives.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this solenoid work with my winch motor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It works with 12V permanent-magnet winch and accessory motors; not compatible with motors that use copper-wound field coils.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How hard is the installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Installation is straightforward: match the six terminals to your original wiring and secure the mount—no cutting or drilling required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55162693353815,"sku":"B0CWRKF62K","price":30.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-front-view-reversing-solenoid.jpg?v=1790337998"},{"product_id":"hneekyr-12v-power-trim-solenoid-starter-for-mercury-mariner-35-275-hp-pair-oe-fit-high-temp-copper","title":"HNeekyr 12V Power Trim Solenoid Starter for Mercury\/Mariner 35–275 HP — Pair, OE-Fit High-Temp Copper","description":"\u003cp\u003e\u003cstrong\u003eThe HNeekyr 12V trim solenoid starter is a direct-fit replacement for Mercury\/Mariner outboard engines (35–275 HP) that restores power trim and tilt function with easy bolt-on installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your boat’s trim\/tilt stopped responding or the original solenoid shows corrosion, this HNeekyr 12V power trim solenoid offers an affordable replacement engineered to match OE fit and function. Designed for a wide range of Mercury and Mariner outboards as well as compatible stern drives, the unit arrives as a pair so you can replace a failing solenoid and keep a spare on board. The body uses robust plastic housing with heavy-gauge copper windings rated to 180°C, and the electrical connections mimic factory geometry for a straightforward swap.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and part numbers does this solenoid work with?\u003c\/h3\u003e\n\n\u003cp\u003eThis solenoid supports many Mercury and Mariner outboards from 35 HP up to 275 HP and fits certain MerCruiser stern drives that use SAE J1171 marine trim pumps. It replaces several OEM numbers commonly found in these systems.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible HP range: 35–275 HP and 3.7L engine families\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM references: 89-846070, 89-94318, 89-96158T, 89-818864T and variants\u003c\/li\u003e\n  \u003cli\u003eWorks with MerCruiser stern drives and SAE J1171 trim pumps when matching OEM part numbers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable and durable is the HNeekyr power trim solenoid?\u003c\/h3\u003e\n\n\u003cp\u003eThe internal coil uses high-temperature 180°C copper wire, and the exterior shell is molded plastic chosen for marine resistance. While this is an aftermarket part rather than an original-equipment unit, it is built to meet OE standards for electrical conductivity and mechanical fit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-temp copper winding for better conductivity under load\u003c\/li\u003e\n  \u003cli\u003eSturdy plastic housing resists moisture and corrosion\u003c\/li\u003e\n  \u003cli\u003eManufactured to match original mounting points and electrical terminals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what comes in the box?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is designed to be fast and accessible: no new holes, no specialty tools—just remove the old solenoid and bolt the HNeekyr unit in place. The package includes two 12V trim solenoids so you can replace the failed unit and keep a backup.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSimple bolt-on replacement: no drilling required\u003c\/li\u003e\n  \u003cli\u003eIncludes 2 solenoids per order for immediate spare usage\u003c\/li\u003e\n  \u003cli\u003eTypical deck-side installation time: minutes for someone with basic tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying to ensure compatibility?\u003c\/h3\u003e\n\n\u003cp\u003eConfirm the OE part number on your existing solenoid before ordering to avoid mismatches. Compare terminal layout, mounting hole spacing and the vehicle’s listed compatible HP range to be certain this aftermarket part will fit correctly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eVerify the existing part number against the listed replacement numbers\u003c\/li\u003e\n  \u003cli\u003eCheck physical terminal orientation and bolt pattern on your unit\u003c\/li\u003e\n  \u003cli\u003eConfirm your engine falls within the specified HP and model families\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: boat owners, marine technicians and DIYers who need a reliable, cost-effective replacement for a failed 12V trim\/tilt solenoid on Mercury, Mariner or compatible MerCruiser applications. If you want an aftermarket unit that mirrors OEM fit and function, arrives as a two-piece kit, and installs quickly without special tools, the HNeekyr trim solenoid is built to get your power trim working again while holding a spare for future convenience.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this trim solenoid fit my Mercury 115 HP outboard?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your current solenoid's OEM number; if it matches the listed replacements and the engine falls in the 35–275 HP range, it should fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install the HNeekyr solenoid?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools required—installation is a bolt-on swap that a DIYer with basic hand tools can complete.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55163233075543,"sku":"B0DBT4BQ3P","price":32.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-trim-solenoid-front-view.jpg?v=1790342300"},{"product_id":"hneekyr-lt890-brake-spring-adjuster-tool-for-heavy-duty-truck-brakes-steel-frame-adjustable-handle","title":"HNeekyr LT890 Brake Spring Adjuster Tool for Heavy-Duty Truck Brakes — Steel Frame, Adjustable Handle","description":"\u003cp\u003e\u003cstrong\u003eThe HNeekyr LT890 is a heavy-duty brake spring adjuster and installer tool engineered to fit most truck brake systems and make installing or removing brake shoe return springs faster, safer, and more precise.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for professional technicians and serious DIYers, the LT890 combines a robust steel frame with an ergonomic handle and an adjustable mechanism so you can position, compress, and secure brake springs without struggling or risking damage to shoes and hardware. Its shape and features were developed specifically for the demands of heavy-duty truck brake work, where leverage, durability, and control matter.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the LT890 make truck brake spring installation easier?\u003c\/h3\u003e\n\u003cp\u003eThe tool provides targeted leverage and a secure holding position so springs can be guided into place with minimal hand strain. Its adjuster mechanism allows fine-tuning so the spring aligns precisely with the shoe hole or anchor point.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in adjuster for precise spring positioning\u003c\/li\u003e\n  \u003cli\u003eLeverage geometry reduces force required to install\/remove springs\u003c\/li\u003e\n  \u003cli\u003eSecure tip and cradle to prevent spring slips during work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat truck brake systems is this compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe LT890 is made to work with most heavy-duty truck and commercial vehicle drum brake systems that use return or hold-down springs. It’s not limited to a single model and fits common spring sizes found in professional workshops.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with typical heavy-duty truck brake shoe return springs\u003c\/li\u003e\n  \u003cli\u003eWorks across a range of commercial drum brake assemblies\u003c\/li\u003e\n  \u003cli\u003eIdeal for fleet maintenance, haulage trucks, and service shops\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat construction and features ensure it lasts in a workshop?\u003c\/h3\u003e\n\u003cp\u003eThe tool is fabricated from high-strength steel to resist bending and wear under repeated use. An ergonomic handle reduces operator fatigue, while a durable finish and precise adjuster keep performance consistent over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength steel construction for industrial use\u003c\/li\u003e\n  \u003cli\u003eComfort grip handle reduces hand fatigue during long jobs\u003c\/li\u003e\n  \u003cli\u003eAdjustable mechanism held by robust fasteners for repeatable accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use the LT890 safely and effectively?\u003c\/h3\u003e\n\u003cp\u003ePosition the tool so its cradle captures the spring, use the adjuster to set alignment, then apply controlled leverage to install or remove the spring. Always wear eye protection and follow vehicle-specific brake service procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlign cradle with spring eye before applying force\u003c\/li\u003e\n  \u003cli\u003eUse steady pressure rather than sudden movements to avoid slips\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer brake-service safety practices and PPE\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The HNeekyr LT890 is intended for professional mechanics, fleet service technicians, and experienced DIY truck owners who regularly service drum brakes on heavy vehicles. It’s a practical addition to any commercial truck shop or home garage that handles brake shoe spring replacement, offering a durable, adjustable solution for repetitive or high-torque brake work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the LT890 suitable for all truck brake springs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits most heavy-duty truck brake shoe return springs, though rare or nonstandard springs may need a different tool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material is the LT890 made from?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The LT890 is constructed from high-strength steel designed for repeated professional use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55163403993431,"sku":"B0F3D8TWKH","price":31.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-lt890-front-view.jpg?v=1790344068"},{"product_id":"hneekyr-starter-solenoid-relay-for-yamaha-yfm-350-400-450-660-2-pack-copper-contacts","title":"HNeekyr Starter Solenoid Relay for Yamaha YFM 350\/400\/450\/660 — 2-Pack, Copper Contacts","description":"\u003cp\u003e\u003cstrong\u003eHNeekyr starter solenoid relay is a direct-fit replacement designed to restore reliable starting on many Yamaha YFM ATVs (350, 400, 450, 660) and comes as a two-piece set.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your ATV cranks slowly, clicks without engaging, or won’t start at all, a faulty starter solenoid is a common culprit. This HNeekyr unit is built with copper contacts and a durable plastic housing to deliver strong conductivity and corrosion resistance. It’s engineered to meet OEM fit specifications so you can swap it in quickly without modifying wiring or drilling new holes.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Yamaha models will this starter relay fit?\u003c\/h3\u003e\n\u003cp\u003eThis solenoid covers a broad range of Yamaha YFM models across multiple years. It’s intended as a replacement part that mirrors factory dimensions so it mounts and plugs in like the original.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2002–2008 Yamaha YFM 660 Grizzly\u003c\/li\u003e\n  \u003cli\u003e2000–2006 Yamaha YFM 400 Kodiak and 2000–2009 YFM 400 Big Bear\u003c\/li\u003e\n  \u003cli\u003e2006–2009 Yamaha YFM 350 Raptor and 2004–2006 Bruin 350 YFM350\u003c\/li\u003e\n  \u003cli\u003e2003–2006 Yamaha Kodiak 450 YFM450 and 2006–2009 Yamaha Wolverine 450 YFM450\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable and durable is this starter solenoid?\u003c\/h3\u003e\n\u003cp\u003eThe relay uses copper internals for effective electrical transfer and a rugged plastic outer case that resists rust and impact. Those materials improve longevity compared with lower-grade aftermarket units, helping maintain consistent performance under typical riding conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCopper contacts for high conductivity and lower voltage drop\u003c\/li\u003e\n  \u003cli\u003ePlastic housing that resists corrosion and physical wear\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet OEM dimensional and electrical standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation—do I need special tools?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: this is a plug-and-play replacement that requires no drilling or custom wiring. Basic hand tools are typically all you need, and the swap can be completed in a few minutes by following common starter-relay replacement steps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement design for bolt and terminal alignment\u003c\/li\u003e\n  \u003cli\u003eNo special connectors or adapters required\u003c\/li\u003e\n  \u003cli\u003eQuick install with standard sockets and screwdrivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do I receive when I order this product?\u003c\/h3\u003e\n\u003cp\u003eYour purchase contains two starter relays, giving you a spare or a matched set for dual-vehicle households. The pair is boxed for safe transit and intended for immediate installation or storage as a backup repair part.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo HNeekyr starter solenoid relays per order\u003c\/li\u003e\n  \u003cli\u003ePackaged to protect electrical contacts and terminals\u003c\/li\u003e\n  \u003cli\u003eReady for plug-and-play installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This HNeekyr starter solenoid relay set is for Yamaha ATV owners, mechanics, and fleet operators who need a reliable, OEM-style replacement without paying dealer prices. It's aimed at riders of Grizzly, Kodiak, Big Bear, Raptor, Bruin and Wolverine models who prefer a straightforward swap—either to restore a non-starting ATV or to keep a spare on hand for fast roadside repairs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this solenoid fit my 2005 Yamaha Kodiak 450?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This HNeekyr starter solenoid is compatible with 2003–2006 Yamaha Kodiak 450 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are tools or wiring changes needed to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools or wiring changes are required; it’s a direct plug-and-play replacement using basic hand tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55164218933591,"sku":"B0DLK8PHW1","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-starter-solenoid-front-view.jpg?v=1790351497"},{"product_id":"hneekyr-14v-golf-cart-solenoid-for-e-z-go-txt-1994-up-direct-fit-starter-relay-copper-contacts","title":"HNeekyr 14V Golf Cart Solenoid for E-Z-GO TXT 1994-Up — Direct-Fit Starter Relay, Copper Contacts","description":"\u003cp\u003e\u003cstrong\u003eHNeekyr's 14V golf cart solenoid is a direct-fit replacement for 1994 and newer E-Z-GO TXT gas models, delivering reliable starter relay operation with durable copper contacts and a rugged housing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen an aging starter relay causes slow starts or intermittent cranking on your E-Z-GO TXT or compatible gas models, swapping in a quality solenoid restores dependable starter engagement. This 14-volt unit is built to match OE mounting and terminal locations so installation is straightforward. It’s designed for a range of 1994-up E-Z-GO vehicles and several Cushman models, offering a robust, cost-effective alternative to OEM parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhich carts will this solenoid fit?\u003c\/h3\u003e\n\u003cp\u003eThis 14V solenoid fits many E-Z-GO gas models from 1994 onward and specific Cushman applications. It is not compatible with RXV models, so confirm your cart model before ordering. The solenoid replaces commonly referenced part numbers for easy cross-reference.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with E-Z-GO TXT, Medalist, 875 models (1994 and later)\u003c\/li\u003e\n  \u003cli\u003eWorks with Four- and Six-Passenger Shuttle, ST Express, ST Shuttle, ST Sport, ST 350\u003c\/li\u003e\n  \u003cli\u003eFits Cushman 2200 vehicles\u003c\/li\u003e\n  \u003cli\u003eReplaces part numbers 27153G01 and 612813\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is the HNeekyr solenoid?\u003c\/h3\u003e\n\u003cp\u003eThe HNeekyr solenoid uses copper coil contacts and a steel sheet core inside a sturdy plastic housing for corrosion resistance and longer service life. These materials reduce wear at contact points and help the unit withstand vibration and outdoor conditions commonly encountered on golf carts. Regular maintenance of connections will extend life further.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCopper coil contacts reduce electrical resistance and arcing\u003c\/li\u003e\n  \u003cli\u003eSteel sheet and robust plastic housing resist rust and impact\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeated cycles typical of golf cart starting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult—will it fit directly into my cart?\u003c\/h3\u003e\n\u003cp\u003eThe solenoid follows OEM mounting and terminal layout, so it installs much like the factory part without modification. Typical installation requires disconnecting the battery, swapping the old unit for the new one, and reconnecting the battery and wiring to the matching terminals. If you’re comfortable with basic hand tools and battery safety, this is a straightforward replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour-terminal layout matches original equipment placement\u003c\/li\u003e\n  \u003cli\u003eBolt-on mounting for direct replacement—no drilling required\u003c\/li\u003e\n  \u003cli\u003eIncludes one starter relay per order for quick swap-out\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical specs and limitations should I know?\u003c\/h3\u003e\n\u003cp\u003eThis is a 14-volt starter solenoid designed for gas-powered E-Z-GO and compatible vehicles and is not suitable for electric or RXV model systems. Verify your cart’s voltage and model year before purchase. Using the correct voltage and terminal connections ensures safe, reliable operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for 14-volt systems used on specified gas carts\u003c\/li\u003e\n  \u003cli\u003eNot compatible with RXV models or non-listed vehicle types\u003c\/li\u003e\n  \u003cli\u003eSold as a replacement, not an OEM-branded part\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a 1994-up E-Z-GO TXT, Medalist, ST-series, Shuttle, 875, or a Cushman 2200 with a failing starter relay, this HNeekyr 14V solenoid is intended for you. It’s aimed at DIY owners and small repair shops that need an affordable, durable, direct-fit replacement matching common OEM part numbers (27153G01, 612813). Avoid this part only if your cart is an RXV or uses a different voltage system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this solenoid be used on RXV models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This 14V solenoid is not compatible with RXV models; confirm your cart model before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it replace part number 27153G01?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is designed to replace 27153G01 and 612813 as a direct-fit alternative.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55164881371479,"sku":"B0CFV2FP4W","price":31.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-front-view-solenoid.jpg?v=1790354258"},{"product_id":"hneekyr-interior-rear-view-mirror-for-hyundai-elantra-tucson-851013x100-tempered-glass-oem-fit","title":"HNeekyr Interior Rear View Mirror for Hyundai Elantra\/Tucson 851013X100 — Tempered Glass, OEM-Fit","description":"\u003cp\u003e\u003cstrong\u003eThe HNeekyr 851013X100 interior rear view mirror is a direct-fit replacement mirror designed to restore clear rear visibility for compatible Hyundai and Kia vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your factory rear view mirror is cracked, fogged, or otherwise compromised, this HNeekyr unit offers a straightforward swap using the original mounting location and connector. Built from tempered glass and durable plastic housing, the mirror is intended to match the fit and function of the OEM part number 851013X100 so installation is simple and the sightlines return to factory-like performance.\u003c\/p\u003e\n\n\u003ch3\u003eWhich cars will this mirror fit?\u003c\/h3\u003e\n\u003cp\u003eThis mirror covers a wide range of Hyundai and Kia models across multiple model years. Always verify vehicle compatibility by checking the mirror part number and year range before purchase to ensure a correct match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHyundai: Elantra (2011–2022), Tucson (2011–2022), Santa Fe (2013–2022), Sonata (2011–2021), Equus (2011–2016), Kona (2018–2022), Veloster (2012–2021).\u003c\/li\u003e\n  \u003cli\u003eKia: Forte, Forte Koup, Forte5 variations (2010–2015 depending on engine), Optima (2011–2020), K5 (2021–2022), Rio (2011–2023), Sorento (2011–2019), Sportage (2011–2023), Stinger (2018–2022), Soul EV (2010–2022), Sedona (2014–2021).\u003c\/li\u003e\n  \u003cli\u003eCheck engine and body variations for some Forte\/Forte5 years to confirm fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the installation?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to mirror the original mirror removal and replacement process so most technicians or confident DIYers can complete it quickly. The mirror uses the same mounting interface as the original, allowing plug-and-play replacement without modifying the windshield or dash trim.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove the trim or cover and detach the old mirror from its bracket.\u003c\/li\u003e\n  \u003cli\u003eDisconnect any electrical connectors if applicable and transfer them to the new unit.\u003c\/li\u003e\n  \u003cli\u003eSecure the HNeekyr mirror on the original mount and reattach trim—no special tools required beyond basic hand tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the materials and visual benefits?\u003c\/h3\u003e\n\u003cp\u003eThe mirror glass and housing are manufactured from high-quality materials intended to match OEM durability and optical clarity. The tempered glass reduces distortion and the robust plastic frame resists vibration and wear for consistent rearward visibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-clarity tempered glass for accurate rearview images.\u003c\/li\u003e\n  \u003cli\u003eDurable plastic housing built to withstand everyday vibrations and temperature changes.\u003c\/li\u003e\n  \u003cli\u003eOEM-match dimensions and mounting points to preserve sightlines and alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what should I expect after buying?\u003c\/h3\u003e\n\u003cp\u003eEach purchase includes a single HNeekyr 851013X100 interior rear view mirror intended as a direct replacement part. Expect the mirror to arrive ready for installation; verify fitment against your vehicle model and the OEM part number before removing the original mirror.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 x HNeekyr interior rear view mirror (part number 851013X100).\u003c\/li\u003e\n  \u003cli\u003ePackaging designed to protect the glass and housing in transit.\u003c\/li\u003e\n  \u003cli\u003eNot included: installation tools, trim removal tools, or additional mounting hardware unless specified by seller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a compatible Hyundai or Kia listed above and need to replace a cracked, cloudy, or nonfunctional interior rear view mirror, the HNeekyr 851013X100 is a practical OEM-style replacement. It’s suitable for vehicle owners, independent mechanics, and service shops seeking a reliable mirror that restores factory sightlines without costly windshield or headliner modification. Before ordering, confirm your vehicle year and model against the fitting list and the original part number to ensure correct compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this mirror fit my 2016 Hyundai Elantra?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — HNeekyr 851013X100 is listed for Elantra model years 2011–2022. Confirm by checking your original part number or mounting style.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is electrical wiring required to install this mirror?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installs are plug-and-play using the existing connector. If your original mirror had electrical features, transfer the wiring during replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55165567795543,"sku":"B0D6GGDS8N","price":34.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-front-view-mirror-assembly.jpg?v=1790355738"},{"product_id":"hneekyr-rear-view-mirror-for-nissan-rogue-altima-direct-fit-interior-replacement-wide-clear-glass","title":"HNeekyr Rear View Mirror for Nissan Rogue \u0026 Altima — Direct-Fit Interior Replacement, Wide Clear Glass","description":"\u003cp\u003e\u003cstrong\u003eThe HNeekyr interior rear view mirror is a direct-fit replacement mirror engineered to restore a clear, wide rearward view for many Nissan models including Rogue and Altima.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your original rearview mirror is cracked, loose, or provides a distorted reflection, this HNeekyr replacement offers a straightforward swap using OE-style fit and mounting. Constructed from quality glass and durable plastic, it delivers reliable clarity and long-term durability so you can return your cabin to safe, usable condition without expensive dealer parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Nissan models will this mirror fit?\u003c\/h3\u003e\n\u003cp\u003eThis mirror covers a broad range of Nissan vehicles across multiple years and platforms. Check fitment against your vehicle’s model and year before ordering to be certain of compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits certain Nissan Altima generations (L31, L32, L33) and Rogue\/X-Trail T32 (2014–2022).\u003c\/li\u003e\n  \u003cli\u003eCompatible with various Pathfinder, Sentra, Sylphy\/Pulsar, Tiida\/Versa, Leaf, Frontier\/Navara, Titan, Xterra and Quest models listed in the product details.\u003c\/li\u003e\n  \u003cli\u003eReplacement part number reference: 96321-2DR0A — use this to confirm match with your original mirror.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this mirror improve rear visibility?\u003c\/h3\u003e\n\u003cp\u003eThe glass is designed to provide a clear, undistorted reflection so you can see traffic and obstacles behind the vehicle more accurately. Its size and angle give a wider field of view than damaged or warped mirrors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality reflective glass for crisp, true-to-life images.\u003c\/li\u003e\n  \u003cli\u003eBroader viewing area to help with lane changes, overtaking and reversing.\u003c\/li\u003e\n  \u003cli\u003eStable mounting reduces vibration and keeps the image steady at speed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and installation like?\u003c\/h3\u003e\n\u003cp\u003eHNeekyr manufactures this interior mirror with durable plastic housing and precision glass for long service life. Installation is designed to be a direct swap—either clip-on or bolt-on depending on your vehicle’s mounting style—so no major modifications are typically required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable plastic frame resists wear and cabin-temperature changes.\u003c\/li\u003e\n  \u003cli\u003eOEM-style mirror glass for clear reflections and longevity.\u003c\/li\u003e\n  \u003cli\u003eSimple replacement process: remove the old unit and install the new one using existing mounts or screws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eEach order includes one HNeekyr rear view mirror ready to install. Before purchasing, confirm the mirror’s part number and that your vehicle’s mount type matches the replacement to avoid fitment issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contains 1 HNeekyr interior rearview mirror.\u003c\/li\u003e\n  \u003cli\u003eVerify compatibility with the specific Nissan year and model on the product details page.\u003c\/li\u003e\n  \u003cli\u003eKeep your original mounting hardware; you may reuse clips or screws if required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own compatible Nissan vehicles and need a reliable, cost-effective replacement for a damaged or worn interior rear view mirror. It’s ideal for DIY installers, mechanics replacing mirrors during interior repairs, or anyone restoring factory functionality without buying dealer-priced parts. If you want an OE-style mirror with clear glass, durable housing, and wide compatibility across Nissan model years, this HNeekyr mirror is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this mirror a direct fit for my Nissan Altima?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Possibly—this mirror fits many Altima generations (L31, L32, L33). Check the detailed vehicle list and part number 96321-2DR0A to confirm fit for your specific year.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The box includes one mirror; you may reuse your vehicle’s original clips or screws. Check your mounting style before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55165568024919,"sku":"B0D6GDXFNM","price":34.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-front-view-mirror.jpg?v=1790355738"},{"product_id":"hneekyr-exhaust-hanger-rods-3-8-x-10-heavy-duty-4-pack-with-rubber-isolators-weld-on-replacement","title":"HNeekyr Exhaust Hanger Rods 3\/8\" x 10\" Heavy-Duty 4-Pack with Rubber Isolators — Weld-On Replacement","description":"\u003cp\u003e\u003cstrong\u003eHNeekyr 4 Pcs Heavy Duty Exhaust Hanger Rod is a set of four 3\/8\" x 10\" iron weld-on exhaust hanger rods with rubber isolators designed to replace or reinforce vehicle exhaust mounts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese heavy duty replacement hangers provide a straightforward, durable way to secure mufflers, pipes, and tail sections of an exhaust system. Built from iron rods with bonded rubber isolators, each piece is sized to fit common repair needs and to accept weld-on installation. The package includes four ready-to-install rods so you can repair multiple mounting points or keep spares on hand for future maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these hangers hold up to road vibration and movement?\u003c\/h3\u003e\n\u003cp\u003eThe combination of solid iron rod and rubber isolator reduces metal-on-metal contact and dampens vibration, helping prevent premature wear of exhaust components. Rubber isolates motion and absorbs small shocks while the iron rod provides the structural support needed for heavy exhaust sections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/8\" diameter iron rod for strong, rigid support\u003c\/li\u003e\n  \u003cli\u003eRubber isolators that reduce rattling and noise\u003c\/li\u003e\n  \u003cli\u003eDesigned to limit metal fatigue from repeated movement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these hangers easy to install on my vehicle?\u003c\/h3\u003e\n\u003cp\u003eYes—each hanger rod has two pre-drilled holes to simplify mounting and to make them suitable for weld-on repairs. The 10\" length offers flexibility for positioning, and the universal design fits many common exhaust geometries.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo mounting holes for straightforward placement and welding\u003c\/li\u003e\n  \u003cli\u003eUniversal sizing that integrates with most exhaust systems\u003c\/li\u003e\n  \u003cli\u003eComes as a four-piece kit so multiple points can be addressed at once\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and materials used?\u003c\/h3\u003e\n\u003cp\u003eEach hanger rod measures 3\/8\" in diameter and 10\" long, constructed from durable iron for structural strength. The attached rubber isolators are bonded to the rod to separate the exhaust from direct contact with mounting points, improving longevity of both parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRod: 3\/8\" diameter, 10\" length iron\u003c\/li\u003e\n  \u003cli\u003eIsolator: molded rubber bonded to the metal rod\u003c\/li\u003e\n  \u003cli\u003eFour rods included for a complete repair or upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich repair situations are these best suited for?\u003c\/h3\u003e\n\u003cp\u003eThese hanger rods are ideal for replacing broken or missing exhaust mounts, reinforcing aging hangers, or fabricating custom supports during exhaust modifications. Their robust construction and straightforward installation make them a common choice for shops and DIY mechanics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRepairing detached or rusted factory hangers\u003c\/li\u003e\n  \u003cli\u003eSupporting aftermarket mufflers or custom exhaust runs\u003c\/li\u003e\n  \u003cli\u003eProviding spare parts for routine maintenance and emergency fixes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: HNeekyr 4 Pcs Heavy Duty Exhaust Hanger Rod is aimed at automotive enthusiasts, mechanics, and DIYers seeking a reliable exhaust mounting solution. If you need durable, weld-on replacement hangers that cut down vibration and provide dependable support for mufflers and pipes, this kit supplies four robust rods and rubber isolators for immediate use. It's especially useful for vehicles with corroded factory mounts, custom exhaust projects, or shops that prefer stocked replacement parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these hangers be welded directly to my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are designed for weld-on installation using the pre-drilled holes; use proper welding procedures for automotive exhaust components.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the rubber isolator withstand high exhaust temperatures?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The molded rubber isolator resists typical exhaust heat and vibration but avoid direct contact with extreme heat sources like open flames.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55166057775447,"sku":"B0DCZ36C36","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-exhaust-hanger-front-view.jpg?v=1790362054"},{"product_id":"hneekyr-rear-door-latch-cable-kit-for-ford-f150-f250-1997-2004-upper-lower-4-piece-oem-style","title":"HNeekyr Rear Door Latch Cable Kit for Ford F150 \u0026 F250 (1997-2004) — Upper \u0026 Lower, 4‑Piece OEM‑Style","description":"\u003cp\u003e\u003cstrong\u003eHNeekyr Rear Door Upper \u0026amp; Lower Latch Cables are a direct-fit replacement kit that restores rear door latching for left and right rear doors on select Ford F150 and F250 models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf a rear door on your Ford F150 or F250 drags, won’t latch, or makes slacky pull motions, worn or broken latch cables are often the cause. This HNeekyr kit supplies both upper and lower rear-door cables for driver and passenger sides, built to match the original routing and lengths so installation is straightforward. The components are manufactured from durable materials to resist breakage and extend service life compared with a damaged OEM cable.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and years are these cables compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis kit is made to fit rear left and right doors on a range of late-1990s and early-2000s Ford trucks. Compatibility is based on door latch design used on these model years rather than a generic universal fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFord F150: 1997 through 2003 and F150 Heritage 2004\u003c\/li\u003e\n  \u003cli\u003eFord F250: 1997 through 1999 (rear driver and passenger sides)\u003c\/li\u003e\n  \u003cli\u003eReplaces common rear latch cable configurations for these model years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these HNeekyr cables match the original parts?\u003c\/h3\u003e\n\u003cp\u003eThe cables are produced with OEM-style dimensions and attachment points so they plug into the same clips and latches as the factory originals. While not branded OEM, they are sized to the same lengths and connection types for a direct replacement experience.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpper cable length: 32.2 inches\u003c\/li\u003e\n  \u003cli\u003eLower cable length: 23.5 inches\u003c\/li\u003e\n  \u003cli\u003eDesigned for direct swap with original routing and connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and durability features?\u003c\/h3\u003e\n\u003cp\u003eHNeekyr uses reinforced cable cores and protective outer sheaths to reduce wear and breakage under repeated use. The kit’s hardware and terminations are designed to withstand regular door operation and exposure to road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium materials for increased tensile strength and resilience\u003c\/li\u003e\n  \u003cli\u003eProtective coating to resist abrasion and moisture\u003c\/li\u003e\n  \u003cli\u003eFactory-style end fittings to prevent premature failure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how does it simplify repair?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives complete with two upper and two lower rear-door latch cables so both sides can be serviced at once. Having all four cables on hand reduces downtime and ensures consistent feel and operation between the left and right rear doors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eA pair of rear upper latch cables (left and right)\u003c\/li\u003e\n  \u003cli\u003eA pair of rear lower latch cables (left and right)\u003c\/li\u003e\n  \u003cli\u003eFits and replaces part numbers 6L3Z18264A26A, 6L3Z18264A27A, 6L3Z18264A01C, 6L3Z18264A00C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This HNeekyr rear-door latch cable kit is aimed at DIY truck owners, independent mechanics, and restoration shops working on late-1990s to early-2000s Ford F150 and F250 models who need a reliable, direct-fit repair option. If you want to replace worn or broken rear latch cables in a single service without modifying the latch assembly, this kit supplies the correct lengths and fittings to restore proper door operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these cables fit both driver and passenger rear doors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes upper and lower cables for both left and right rear doors on the specified Ford models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these original OEM parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are aftermarket replacements built to OEM-style specifications and listed compatible part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55166328209751,"sku":"B0DLK9MY3T","price":38.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-front-packaging-rear-door-cable-kit.jpg?v=1790366915"},{"product_id":"hneekyr-led-interior-door-courtesy-lights-for-1999-2006-silverado-sierra-white-4-pack-plug-and-play","title":"HNeekyr LED Interior Door Courtesy Lights for 1999–2006 Silverado\/Sierra — White, 4-Pack, Plug-and-Play","description":"\u003cp\u003e\u003cstrong\u003eHNeekyr LED Interior Door Courtesy White Light is a drop-in, plug-and-play replacement set of four bright white LED door panel lights designed specifically for 1999–2006 Silverado\/Sierra and compatible Chevy\/GMC trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese courtesy lamps modernize interior door illumination with high-output SMD LEDs housed in durable ABS shells. They are made to fit the original sockets on a variety of Chevy and GMC models, so you can restore or upgrade faded factory door lamps without cutting wires or modifying the vehicle. The housings are tinted smoky while the emitted light stays clear and white, improving visibility when entering or exiting the truck at night and acting as a visible courtesy\/warning light.\u003c\/p\u003e\n\n\u003ch3\u003eWill these LED door lights fit my Silverado, Sierra, or Yukon?\u003c\/h3\u003e\n\u003cp\u003eThese lamps are engineered for direct compatibility with many late-1990s and early-2000s Chevrolet and GMC models. They match the original mounting and electrical connections for a true plug-and-play swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 1999–2006 Silverado and Sierra 1500 models\u003c\/li\u003e\n  \u003cli\u003eWorks with 2001–2006 3500 and 2500 HD variants\u003c\/li\u003e\n  \u003cli\u003eCompatible with 1999–2006 Yukons and C1500\/C2500\/C3500 trucks\u003c\/li\u003e\n  \u003cli\u003eReplaces OE part numbers 15021517, 15021518, 923-103, 923-104\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and requires no wiring or special tools; most owners complete the swap in minutes. Remove the old lamp, plug the new unit into the existing socket, and snap the assembly back into the door panel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrue plug-and-play—no splicing or adapters\u003c\/li\u003e\n  \u003cli\u003eTypical install time: a few minutes per door\u003c\/li\u003e\n  \u003cli\u003eNo extra connectors, relays, or resistors required\u003c\/li\u003e\n  \u003cli\u003eSimple panel removal may need a trim tool for some vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build and light quality features?\u003c\/h3\u003e\n\u003cp\u003eThese courtesy lights use multiple high-output SMD LED chips inside a sturdy ABS housing to deliver brighter, whiter light than many original incandescent bulbs. The assembly is made to resist fading and handle repeated use over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt with thirty-three high-power SMD LED chips for even illumination\u003c\/li\u003e\n  \u003cli\u003eABS housing for impact resistance and long-term durability\u003c\/li\u003e\n  \u003cli\u003eSmoky-colored lens with clear white output for a modern look\u003c\/li\u003e\n  \u003cli\u003eDesigned to tolerate exposure — water-resistant and UV-stable materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical benefits will I notice after upgrading?\u003c\/h3\u003e\n\u003cp\u003eReplacing factory door lamps with these LEDs improves interior visibility while using less current, and the brighter light helps others see open doors at night. They also refresh the cabin appearance and reduce the need for frequent bulb changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrighter, clearer light for safer entering and exiting at night\u003c\/li\u003e\n  \u003cli\u003eLower energy draw extends battery\/charging system demands\u003c\/li\u003e\n  \u003cli\u003eLonger service life compared with incandescent bulbs\u003c\/li\u003e\n  \u003cli\u003ePackage includes four lamps for a full door-panel update\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a compatible Silverado, Sierra, Yukon, or classic C‑series truck from the listed years and want a clean, easy interior lighting upgrade, this HNeekyr LED courtesy light set is aimed at do-it-yourselfers, fleet owners, and restorers who prefer a plug-and-play solution. It’s especially useful for drivers who want improved night-time visibility, a refreshed interior look, and a low-maintenance alternative to aging factory lamps.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lights require any wiring modifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No wiring changes are needed; they plug directly into the factory socket for a quick swap.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many lights come in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The set includes four door panel courtesy lights for a full interior update.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55166454202711,"sku":"B0CRTQDGQY","price":38.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-front-assembly-view.jpg?v=1790368736"},{"product_id":"hneekyr-led-interior-door-courtesy-lights-for-chevy-gmc-4-piece-set-plug-and-play-brighter-smd-leds","title":"HNeekyr LED Interior Door Courtesy Lights for Chevy\/GMC (4‑Piece Set) — Plug-and-Play, Brighter SMD LEDs","description":"\u003cp\u003e\u003cstrong\u003eA set of four HNeekyr LED interior door courtesy lights that directly replace factory lamps for 1995–2006 Chevy and GMC trucks and SUVs, delivering brighter, energy-saving illumination with plug-and-play installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUpgrade flickering or dim factory door lamps with this ready-to-install HNeekyr kit made for select Chevy\/GMC models from the mid-1990s through the 2000s. Each lamp uses multiple high-output SMD LEDs housed in durable ABS and is designed to fit the original socket and mounting points so you can restore interior courtesy lighting quickly without splicing wires or modifying the vehicle.\u003c\/p\u003e\n\n\u003ch3\u003eWill these LED door lights fit my truck or SUV?\u003c\/h3\u003e\n\u003cp\u003eThese courtesy lamps are engineered to match the factory form and electrical connection for a long list of Chevrolet and GMC vehicles. Check compatibility by model and year to ensure a correct fit before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models include: 1999–2006 Silverado\/Sierra 1500, 2500, 3500, 2001–2006 3500 HD, 1999–2006 Yukon, 1999–2006 Escalade, 1995–1999 C1500\/C2500\/C3500, Suburban, Tahoe, Avalanche.\u003c\/li\u003e\n  \u003cli\u003eDesigned as direct replacements for OEM part numbers 15021517, 15021518, 923-103, 923-104.\u003c\/li\u003e\n  \u003cli\u003eSold as a 4-piece set for front and rear door installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is the installation process?\u003c\/h3\u003e\n\u003cp\u003eInstallation is plug-and-play and intended for quick do-it-yourself replacement. You’ll remove the old lamp, plug the vehicle socket into the new HNeekyr unit, and reseat the lamp—no cutting or hardwiring required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical installation takes only a few minutes per door.\u003c\/li\u003e\n  \u003cli\u003eNo additional adapters, relays, or wiring splices needed.\u003c\/li\u003e\n  \u003cli\u003eWorks with the original mounting location and connector type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and performance highlights?\u003c\/h3\u003e\n\u003cp\u003eEach lamp uses thirty-three SMD LED chips in an ABS casing built to resist fading and environmental exposure. The LEDs offer a brighter, more efficient light than many aging incandescent door lamps, while the housing provides basic water resistance and UV protection for long-term use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eABS housing for impact resistance and color stability.\u003c\/li\u003e\n  \u003cli\u003e33 high-power SMD LEDs per unit for increased brightness and lower energy draw.\u003c\/li\u003e\n  \u003cli\u003eWaterproof and UV-resistant design to withstand interior moisture and sun exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these lights improve nighttime visibility and warning at doors?\u003c\/h3\u003e\n\u003cp\u003eThe HNeekyr LEDs increase interior door illumination, helping occupants see when entering or exiting at night and making open doors more noticeable to others. They are intended to enhance visibility and act as a supplemental warning—appropriate as a safety-minded upgrade but not a replacement for vehicle safety systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrighter than many aged factory bulbs for clearer ground and doorway visibility.\u003c\/li\u003e\n  \u003cli\u003eLow power draw reduces load on the vehicle’s lighting circuit.\u003c\/li\u003e\n  \u003cli\u003eFits front and rear door locations to provide consistent illumination throughout the cabin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and DIY owners of older Chevrolet and GMC trucks and SUVs who want an easy, reliable interior lighting upgrade. If you have dim, failing, or missing door courtesy lamps and want a fast plug-and-play replacement that improves cabin lighting while keeping the original fitment, this four-piece HNeekyr LED set is built for your vehicle.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these LED lights require any wiring modifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No wiring changes needed; they are plug-and-play replacements that use your vehicle’s existing door lamp connector.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many lights are included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit contains four door panel courtesy lights to cover front and rear doors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55166977016151,"sku":"B0CLGS662N","price":39.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-front-view-installed.jpg?v=1790374083"},{"product_id":"hneekyr-door-hinge-pin-bushing-repair-kit-for-gm-trucks-1988-2001-with-springs-spring-tool-stainless-corrosion-resistant-part","title":"HNeekyr Door Hinge Pin Bushing Repair Kit for GM trucks 1988–2001 — with springs \u0026 spring tool, stainless corrosion-resistant part","description":"\u003cp\u003e\u003cstrong\u003eHNeekyr's Door Hinge Pin Bushing Repair Kit with springs and a door spring tool restores worn GM front door hinges so doors open and close smoothly like new.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Chevrolet or GMC truck or SUV from the late 1980s through the early 2000s has sagging or stiff front doors, this all-in-one kit supplies the bushings, hinge pins, gaskets, springs and a simple spring tool to correct the fit and movement. Each component is stainless steel or corrosion-resistant for long life, and the set is sold as a direct replacement designed to match factory hinge dimensions for a reliable repair without body work or welding.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this kit improve a sagging or noisy door?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit replaces worn hinge bushings and pins that cause door droop, rubbing, and misalignment. By restoring correct hinge spacing and tension with fresh bushings and springs, doors return to smooth, centered operation and reduced rattles.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes 8 bushings to replace degraded nylon\/metal sleeves that allow play.\u003c\/li\u003e\n  \u003cli\u003eSix upgraded hinge pins provide straight, corrosion-resistant pivot shafts.\u003c\/li\u003e\n  \u003cli\u003eTwo return springs and gaskets restore tension and sealing at the hinge.\u003c\/li\u003e\n  \u003cli\u003eDoor spring tool helps compress and install springs safely and accurately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles is this HNeekyr kit compatible with?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit fits a wide range of Chevrolet and GMC pickups and SUVs built between 1988 and 2001. Compatibility covers C1500\/K1500, C2500\/K2500, C3500\/K3500 trucks plus Suburban, Tahoe and Yukon models in the listed year ranges.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eChevrolet C\/K series 1988–2001 (model-specific ranges noted).\u003c\/li\u003e\n  \u003cli\u003eChevrolet Suburban and Tahoe where factory hinge design matches.\u003c\/li\u003e\n  \u003cli\u003eGMC C\/K series trucks and Yukon 1989–2000 variants.\u003c\/li\u003e\n  \u003cli\u003eDoor spring tool also fits most GM cars and light trucks of the era.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the parts in this kit durable and easy to fit?\u003c\/h3\u003e\n\n\u003cp\u003eComponents are made from stainless steel or treated metal to resist rust and wear from repeated opening cycles. The parts are machined to match OEM dimensions so they slip into the original hinge assemblies and secure with minimal modification.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStainless and corrosion-resistant metals resist seizing and galling.\u003c\/li\u003e\n  \u003cli\u003ePrecision-fit bushings and pins reduce side-to-side play and wear.\u003c\/li\u003e\n  \u003cli\u003eSimple hardware layout eliminates the need for welding or hinge replacement.\u003c\/li\u003e\n  \u003cli\u003eClear parts count for one-door or multi-door repairs—see included quantities.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does installation take and what tools are needed?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation can often be completed in one garage session per door by a DIYer with basic hand tools. The included door spring tool speeds spring removal and installation while reducing risk of damage to paint or the hinge posts.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTypical install time: 30–90 minutes per door depending on corrosion and access.\u003c\/li\u003e\n  \u003cli\u003eBasic tools: punch, hammer, sockets, and the included spring tool for safety.\u003c\/li\u003e\n  \u003cli\u003eNo welding or body filler required for standard hinge repairs.\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle service manual torque and alignment steps for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The HNeekyr Door Hinge Pin Bushing Repair Kit is intended for owners, mechanics, and restoration enthusiasts working on Chevrolet and GMC trucks and SUVs from the late 1980s through the early 2000s who want a cost-effective, durable repair that returns door alignment and function to factory-like performance without replacing complete hinges.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit my 1996 Chevrolet Tahoe?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit lists compatibility with Chevrolet Tahoe models from 1995–2000; confirm hinge style matches your vehicle before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are tools included to install the springs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A dedicated door spring tool is included to compress and fit the springs safely during installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55167282184535,"sku":"B0BW5RJXLX","price":59.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-front-packaging-kit.jpg?v=1790381218"},{"product_id":"hneekyr-6an-transmission-cooler-hose-kit-70-ptfe-lined-stainless-braided-high-flow-durable","title":"HNeekyr 6AN Transmission Cooler Hose Kit 70\" PTFE-Lined Stainless Braided - High-Flow, Durable","description":"\u003cp\u003e\u003cstrong\u003eHNeekyr 6AN 70\" Transmission Cooler Hose Line Kit is a stainless steel braided PTFE transmission cooling line set designed to add or replace transmission fluid plumbing and protect your gearbox from overheating.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete kit includes two 70\" PTFE-lined hoses with stainless wire braid and a full assortment of AN-to-NPT\/NPS adapters so you can route transmission fluid to an external cooler or replace worn factory lines. Built for hard use under high temperatures and corrosive conditions, the lines deliver reliable fluid flow and long service life for popular automatic and manual transmissions.\u003c\/p\u003e\n\n\u003ch3\u003eWhich transmissions will this hose kit work with?\u003c\/h3\u003e\n\u003cp\u003eThe HNeekyr 6AN 70\" lines are compatible with many common automatic and some manual transmissions. Check your vehicle fittings and adapter needs before ordering to ensure proper fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with: TH350, TH400, 4L60E, 4L80E, 700R4, 200-4R, TR6060\u003c\/li\u003e\n  \u003cli\u003eAlso fits: C5, C6, AOD, 4R100, 4R70W when adapter matches\u003c\/li\u003e\n  \u003cli\u003e6AN fittings provide a universal, high-flow connection for aftermarket coolers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these hoses improve transmission cooling and reliability?\u003c\/h3\u003e\n\u003cp\u003eReplacing old rubber lines with PTFE-lined, stainless braided hoses reduces the chance of leaks, swelling, and heat-related deterioration. The smooth PTFE bore maintains consistent fluid flow while the stainless braid protects the hose from abrasion and pressure spikes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePTFE inner tube resists heat and chemical breakdown\u003c\/li\u003e\n  \u003cli\u003eStainless steel braid prevents abrasion and limits expansion\u003c\/li\u003e\n  \u003cli\u003e6AN fittings support higher flow rates to external coolers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hardware comes in the package and how does it help installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with two full-length hoses and a selection of adapters to connect to a variety of transmission and cooler ports. Multiple adapter types let you adapt the 6AN lines to common NPT and NPS threads without fabricating custom fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2x 70\" PTFE-lined stainless braided hoses (3\/8\" inner)\u003c\/li\u003e\n  \u003cli\u003e4x 90° 6AN female-to-male adapters for tight routing\u003c\/li\u003e\n  \u003cli\u003e4x 6AN to 1\/4\" NPT, 2x 6AN to 3\/8\" NPT, 2x 6AN to 1\/4\" NPS adapters\u003c\/li\u003e\n  \u003cli\u003e2x rubber rings to assist sealing where needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install these lines myself and what should I watch for?\u003c\/h3\u003e\n\u003cp\u003eMany mechanically inclined buyers can install the hoses with basic tools, but proper routing, torque, and leak checking are essential. Avoid sharp bends, ensure adapters are sealed correctly, and pressure-test the system before full use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse correct thread sealant where required on NPT\/NPS fittings\u003c\/li\u003e\n  \u003cli\u003eAvoid kinking; maintain gentle bends and secure clamps\u003c\/li\u003e\n  \u003cli\u003eBleed and pressure-test to verify leak-free connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The HNeekyr 6AN 70\" Transmission Cooler Hose Line Kit is aimed at DIY mechanics, performance builders, and restoration shops that need durable, high-temp transmission fluid lines. If you’re upgrading to an external cooler, replacing aged rubber hoses, or preparing a vehicle for towing or heavy-duty use, this kit supplies the hoses and adapters required for a dependable installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these 6AN hoses fit my 4L60E transmission?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit supports 4L60E when you use the included adapters to match factory threads; confirm your port size before install.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these hoses safe for high-temperature use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, PTFE inner lining and stainless braid resist high heat and chemical exposure for transmission fluid applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55167291949399,"sku":"B0DYJJFKBT","price":61.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-front-packaging-hoses.jpg?v=1790381761"},{"product_id":"hneekyr-led-third-brake-light-assembly-compatible-with-2015-2020-gmc-direct-fit-brighter-leds","title":"HNeekyr LED Third Brake Light Assembly Compatible with 2015-2020 GMC — Direct-fit, Brighter LEDs","description":"\u003cstrong\u003eHNeekyr LED Third Brake Light Assembly is a direct-fit replacement high-mount stop light engineered to restore factory fit, brighter LED braking visibility, and weather-resistant performance for 2015–2020 GMC and Cadillac full-size SUVs.\u003c\/strong\u003e\n\n\u003cp\u003eIf your center high mount stop light is cracked, dim, or not functioning, this HNeekyr LED assembly replaces OEM part numbers 923-117, 22783103, and 22803028 for a reliable, plug-and-play upgrade. It’s designed to match the original mounting points and electrical connector so you can swap it into Yukon, Yukon XL, Escalade, or Escalade ESV models from 2015 through 2020 without cutting or splicing wires.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this third brake light match my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe HNeekyr assembly follows factory dimensions and uses the same 2-pin connector found on the original unit, so alignment, bolt locations, and electrical plug-in are consistent with OEM expectations. It’s intended as a direct replacement part rather than a universal aftermarket piece.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with GMC Yukon, Yukon XL, Cadillac Escalade, Escalade ESV (2015–2020).\u003c\/li\u003e\n\u003cli\u003eReplaces OEM numbers 923-117, 22783103, 22803028 for exact fitment.\u003c\/li\u003e\n\u003cli\u003eStandard 2-pin connector avoids wiring changes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the LED upgrade improve safety and visibility?\u003c\/h3\u003e\n\u003cp\u003eThis unit uses a full LED light source that illuminates faster and appears brighter than many burned-out or aging incandescent third brake lights. Brighter, quicker illumination helps trailing drivers notice braking sooner in many driving conditions, improving visual signalling during stop-and-go traffic.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull LED array for faster response and higher perceived brightness.\u003c\/li\u003e\n\u003cli\u003eClear red lens for strong rear visibility under various light conditions.\u003c\/li\u003e\n\u003cli\u003eIP-rated waterproof housing for consistent output in rain or snow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be straightforward and quick: unbolt the old assembly, unplug its connector, and fit the HNeekyr unit into the original location. No special tools or wire splicing are required, and the swap can typically be finished in about ten minutes with basic hand tools.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlug-and-play 2-pin wiring—no electrical modifications.\u003c\/li\u003e\n\u003cli\u003eFactory-style bolt points for an accurate, secure mount.\u003c\/li\u003e\n\u003cli\u003eInstallation time generally about 10 minutes for a single person.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the HNeekyr third brake light for everyday driving?\u003c\/h3\u003e\n\u003cp\u003eBuilt from high-quality ABS plastic with a clear red lens and an IP-rated sealed structure, this assembly resists impact, corrosion, and moisture to maintain operation over time. The materials and design focus on long-term reliability in common automotive environments.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eABS housing resists impacts and wear.\u003c\/li\u003e\n\u003cli\u003eCorrosion- and humidity-resistant construction for extended life.\u003c\/li\u003e\n\u003cli\u003eSealed, weatherproof build for dependable long-distance use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers of 2015–2020 GMC Yukon, Yukon XL, Cadillac Escalade, or Escalade ESV who need a dependable, OEM-style replacement for a damaged or failing center high mount stop lamp. It suits vehicle owners and DIY mechanics who want a quick, bolt-in LED upgrade that restores factory fit and improves rear signaling without electrical work or custom mounting.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this LED third brake light plug-and-play?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It uses the original 2-pin connector for direct replacement with no wiring modifications required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which vehicles does this part fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits GMC Yukon, Yukon XL, Cadillac Escalade, and Escalade ESV model years 2015–2020 replacing OEM 923-117\/22783103\/22803028.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55168342393175,"sku":"B0GMJ8R325","price":68.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-led-third-brake-light-front-view.jpg?v=1790401044"},{"product_id":"hneekyr-6an-transmission-cooler-hose-line-kit-52-stainless-ptfe-braided-6an-fittings-npt-adapters","title":"HNeekyr 6AN Transmission Cooler Hose Line Kit 52\" – Stainless PTFE Braided, 6AN Fittings \u0026 NPT Adapters","description":"\u003cp\u003e\u003cstrong\u003eHNeekyr 6AN 52\" Transmission Cooler Hose Line Kit is a stainless-steel braided PTFE hose kit with 6AN fittings and multiple adapters designed to add or replace transmission cooler lines for a wide range of automatic transmissions.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis hose line kit provides a corrosion-resistant, heat-tolerant route for transmission fluid between the gearbox and an external cooler. Built with a PTFE inner core and stainless-steel woven exterior, the assembly resists high temperatures, fluid breakdown, and abrasion. The kit contains two 52\" hoses plus a selection of 6AN fittings and NPT adapters so you can connect to many popular transmissions without extensive modification.\u003c\/p\u003e\n\n\u003ch3\u003eWill this kit fit my transmission and cooler setup?\u003c\/h3\u003e\n\u003cp\u003eYes — the HNeekyr kit was designed for broad compatibility with many domestic automatic transmissions and aftermarket coolers. It includes adapters to convert 6AN to common NPT sizes used on OEM cooler ports so you can connect directly to transmissions like Turbo 400, Turbo 350, Power Glide, and later GM 700R4\/4L60-series units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible transmissions listed: Turbo 350 (with 1\/4\" NPT), Turbo 400, Turbo 200\/200R4, Power Glide (1\/4\" NPT).\u003c\/li\u003e\n  \u003cli\u003eSupports GM 700R4, 4L60, 4L60E, 4L65E, 4L80E (95-on) and Ford C4, C6, AOD lines.\u003c\/li\u003e\n  \u003cli\u003eIncludes 6AN-to-1\/4\" NPT and 6AN-to-3\/8\" NPT adapters for common ports.\u003c\/li\u003e\n  \u003cli\u003eUseful for connecting aftermarket external coolers or replacing worn OEM lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and leak-resistant are these hoses?\u003c\/h3\u003e\n\u003cp\u003eThe hoses combine a PTFE interior with a stainless-steel woven outer braid to resist chemical attack, high heat and external abrasion. Swivel 6AN fittings and proper NPT adapters reduce stress at connections, lowering the chance of leaks when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePTFE core provides chemical compatibility with automatic transmission fluid.\u003c\/li\u003e\n  \u003cli\u003eStainless-steel braid shields against chafing and high-temperature exposure.\u003c\/li\u003e\n  \u003cli\u003e90° swivel 6AN fittings help orient hoses to prevent kinks and strain.\u003c\/li\u003e\n  \u003cli\u003eThreaded adapters ensure secure sealing when tightened to spec (use proper thread sealant if required).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives ready to install with two 52\" hoses and a full complement of fittings and adapters so you can adapt to different port sizes and cooler inlets. Installation typically requires basic hand tools and attention to routing to avoid hot or moving parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded items: two 52\" 6AN stainless braided hoses (3\/8\" bore), two 90° female-to-male swivel 6AN elbows.\u003c\/li\u003e\n  \u003cli\u003eAdapters: four 6AN-to-1\/4\" NPT and two 6AN-to-3\/8\" NPT adapters for common transmission ports.\u003c\/li\u003e\n  \u003cli\u003eSimple installation: tighten fittings to specification, check routing, and test for leaks under pressure.\u003c\/li\u003e\n  \u003cli\u003eNo specialized tooling required; use wrenches and thread sealant where appropriate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does adding or replacing a cooler line help my vehicle?\u003c\/h3\u003e\n\u003cp\u003eUsing a high-quality line like this helps maintain transmission fluid flow to an external cooler, aiding temperature control under load. Proper cooling reduces thermal stress on fluids and components, which can help avoid performance loss associated with sustained high temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupports consistent fluid circulation to aftermarket or factory coolers.\u003c\/li\u003e\n  \u003cli\u003eHelps limit excessive temperature spikes during towing or heavy use.\u003c\/li\u003e\n  \u003cli\u003eDurable construction reduces rupture and leak risk compared with aged rubber lines.\u003c\/li\u003e\n  \u003cli\u003eModular adapters make it suitable for retrofits and repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The HNeekyr 6AN 52\" Transmission Cooler Hose Line Kit is intended for vehicle owners, mechanics and DIY enthusiasts installing or upgrading external transmission coolers on trucks, SUVs and performance cars. It's a practical choice when replacing worn rubber lines, fitting an aftermarket cooler, or adapting fittings between 6AN and common NPT ports. If you need a corrosion-resistant, heat-tolerant hose set with flexible adapters for broad transmission compatibility, this kit provides the components to complete the job without custom hose fabrication.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit my Turbo 400 transmission?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit supports Turbo 400 and includes adapters to connect 6AN fittings to common NPT ports used on that transmission.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are special tools required to install the hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are needed; basic wrenches and proper thread sealant are sufficient for secure installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55168348356951,"sku":"B0DYJKYNYX","price":62.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-front-packaging-6an-52in-kit.jpg?v=1790401253"},{"product_id":"hneekyr-led-third-brake-light-chevy-tahoe-suburban-2015-2020-oem-fit-full-led-plug-and-play","title":"HNeekyr LED Third Brake Light — Chevy Tahoe \u0026 Suburban 2015–2020, OEM-fit Full LED, Plug-and-Play","description":"\u003cp\u003e\u003cstrong\u003eThe HNeekyr Third Brake Light Full LED High Mount Stop Light is an OEM-compatible, plug-and-play replacement that restores bright, reliable center high-mount stop lighting for 2015–2020 Chevy Tahoe and Suburban models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplacing a worn, dim, or damaged third brake light with a precise-fit LED assembly improves rear visibility and keeps your vehicle looking factory-fresh. This HNeekyr unit is built as a direct swap for GM part numbers #22783104 and 923-116, constructed from durable ABS with a full LED light source and a standard 2-pin connector for fast installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this LED third brake light improve visibility and safety?\u003c\/h3\u003e\n\u003cp\u003eThe HNeekyr high mount stop light uses multiple LEDs to produce a bright, even brake signal that’s easier for following drivers to see in traffic and poor weather. Positioned high on the rear window area, it supplements the main brake lamps and increases the overall conspicuity of your vehicle’s braking action.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull LED array delivers uniform, high-intensity illumination.\u003c\/li\u003e\n\u003cli\u003eHigh-mounted placement catches drivers’ attention earlier than lower taillights.\u003c\/li\u003e\n\u003cli\u003eWorks well in rain, fog, and low-light driving conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my Chevy Tahoe or Suburban without modification?\u003c\/h3\u003e\n\u003cp\u003eYes — HNeekyr designed this assembly to be an exact OEM replacement for the listed models, matching factory mounting points and electrical connections. It replaces GM part numbers #22783104 and 923-116, so no trimming or wiring changes are required for compatible vehicles.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with 2015–2020 Chevy Tahoe and 2015–2020 Chevy Suburban.\u003c\/li\u003e\n\u003cli\u003eAlso fits 2016–2019 Chevy Suburban 3500 HD variants listed by OEM part numbers.\u003c\/li\u003e\n\u003cli\u003eUses original bolt holes and a standard 2-pin connector for plug-and-play mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is the installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be straightforward and quick; most installations take under ten minutes when following basic steps. The lamp uses the factory bolt pattern and a 2-pin connector, so in many cases you only need simple hand tools to remove the old assembly and secure the new one.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlug-and-play 2-pin connector matches factory harness.\u003c\/li\u003e\n\u003cli\u003eUses existing mounting hardware and bolt holes — no drilling required.\u003c\/li\u003e\n\u003cli\u003eEstimated install time under 10 minutes for typical DIYers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does this third brake light offer?\u003c\/h3\u003e\n\u003cp\u003eHNeekyr built the assembly from high-quality ABS plastic for strong impact resistance and weather endurance. The full LED lighting system resists filament failure and heat-related dimming, providing longer service life than conventional incandescent third brake lights.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRobust ABS housing resists daily wear and road debris impact.\u003c\/li\u003e\n\u003cli\u003eFull LED module for consistent brightness and longer lifespan.\u003c\/li\u003e\n\u003cli\u003eSealed construction to help withstand moisture and temperature changes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Owners of 2015–2020 Chevy Tahoe and 2015–2020 Chevy Suburban (including 2016–2019 Suburban 3500 HD where specified) who need a reliable, direct-fit replacement for their center high-mount stop lamp. It’s ideal for drivers who prefer an OEM-correct look with upgraded LED brightness, DIYers who want a fast plug-and-play swap, and fleet managers maintaining consistent vehicle safety and appearance. Avoids complicated rewiring while restoring clear, high-mounted brake signaling to improve visibility behind your vehicle.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this HNeekyr light fit my 2017 Chevy Tahoe?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This unit is a direct OEM replacement compatible with 2015–2020 Chevy Tahoe models, matching the factory mounting and connector.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is wiring or cutting required for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No cutting or rewiring is needed — it uses the factory bolt holes and a standard 2-pin connector for plug-and-play installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55168376373591,"sku":"B0GMHC4YZV","price":69.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-third-brake-light-front-assembly.jpg?v=1790402136"},{"product_id":"hneekyr-roof-marker-lights-5pcs-amber-for-dodge-ram-promaster-2014-2026-plug-and-play-sealed-abs","title":"HNeekyr Roof Marker Lights 5PCS Amber for Dodge Ram ProMaster 2014–2026 — Plug-and-Play Sealed ABS","description":"\u003cstrong\u003eThese HNeekyr 5PCS cab roof top marker lights are plug-and-play amber front clearance lights designed to replace factory markers on Dodge Ram ProMaster 1500\/2500\/3500 models from 2014 through 2026.\u003c\/strong\u003e\n\n\u003cp\u003eIf your ProMaster’s front roof marker lights are dim, cracked, or missing, this five-piece set gives you a straightforward replacement solution. Each lamp uses a clear outer lens with amber illumination for strong visibility, and the housings are molded from durable ABS with a polycarbonate lens and sealed construction for weather resistance. They match common OEM part numbers and are built to install without splicing or additional wiring.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these lights improve visibility on my ProMaster?\u003c\/h3\u003e\n\u003cp\u003eThe HNeekyr markers combine an amber light source with a clear lens to create a focused, penetrating signal that’s easier to notice in rain, fog, and nighttime driving. They don’t alter vehicle wiring and are intended to restore or increase the brightness of your roof clearance lights.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAmber illumination for high contrast against road and sky\u003c\/li\u003e\n  \u003cli\u003eClear lens concentrates light for improved range\u003c\/li\u003e\n  \u003cli\u003eWorks effectively in low-visibility conditions\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet the light positioning of factory markers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and replace the original parts?\u003c\/h3\u003e\n\u003cp\u003eThis set is made to fit Dodge Ram ProMaster 1500, 2500, and 3500 models from 2014 through 2026 and is listed to replace common OEM part numbers. Check the part references against your vehicle to confirm compatibility before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2014–2026 Dodge Ram ProMaster 1500\/2500\/3500\u003c\/li\u003e\n  \u003cli\u003eIntended replacements for part numbers 926-109 and 68232473AA\/AB\/AC\/AD\u003c\/li\u003e\n  \u003cli\u003eFive-piece set matches factory roof layout for most ProMaster roofs\u003c\/li\u003e\n  \u003cli\u003eSimple cross-reference avoids fitment guesswork\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weatherproof are these marker lights?\u003c\/h3\u003e\n\u003cp\u003eThe housings are manufactured from impact-resistant ABS with a polycarbonate lens and an all-weather sealed design, so the assemblies resist water, dust, and general road grime. The components are energy-efficient and built for extended service life when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eABS plastic shell resists cracking and UV exposure\u003c\/li\u003e\n  \u003cli\u003ePolycarbonate lens resists impacts and scratching\u003c\/li\u003e\n  \u003cli\u003eSealed construction for waterproof and dustproof performance\u003c\/li\u003e\n  \u003cli\u003eEnergy-efficient illumination to reduce load on vehicle electrical system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult—do I need special tools or wiring?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be plug-and-play: no cutting, splicing, or electrical modifications are required if your vehicle uses standard factory connectors. The replacement process typically involves removing the old unit and snapping the new marker into place.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play connectors match factory wiring harnesses\u003c\/li\u003e\n  \u003cli\u003eNo soldering or additional components required\u003c\/li\u003e\n  \u003cli\u003eMounting hardware and connector orientation follow OEM layout\u003c\/li\u003e\n  \u003cli\u003eSimple removal and replacement for most DIYers or technicians\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers, fleet managers, and van upfitters who operate Dodge Ram ProMaster 1500\/2500\/3500 vans built between 2014 and 2026 and need a reliable, weatherproof, OEM-fit replacement for worn or missing front cab roof marker lights. It’s suitable for routine maintenance, vehicle restorations, or brightness upgrades where factory-style performance and straightforward installation are priorities.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these markers fit my Dodge Ram ProMaster?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this 5-piece set fits ProMaster 1500\/2500\/3500 models from 2014 through 2026 and replaces listed OEM part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is any wiring or modification required to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No modifications are needed; the lights use plug-and-play connectors designed to match factory wiring harnesses.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55168432537943,"sku":"B0FSKV239P","price":50.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-front-roof-marker-light-packaging.jpg?v=1790403819"},{"product_id":"hneekyr-led-third-brake-light-for-ford-edge-2015-2024-direct-fit-923-133-plug-and-play","title":"HNeekyr LED Third Brake Light for Ford Edge 2015-2024 - Direct-Fit 923-133, Plug-and-Play","description":"\u003cstrong\u003eHNeekyr 923-133 is a direct-fit LED high-mount third brake light built to replace the factory stop lamp on Ford Edge models from 2015 through 2024.\u003c\/strong\u003e\n\n\u003cp\u003eThis high-mounted stop lamp restores bright, reliable rear signaling for your Edge without modification. Designed as a direct replacement for OEM part numbers 923-133 and FT4Z13A613A, the assembly uses energy-efficient LED modules housed in a durable casing engineered to resist impact, corrosion, and weather. It installs with a simple plug-and-play connection so you can swap it in and get back on the road quickly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this third brake light improve visibility?\u003c\/h3\u003e\n\u003cp\u003eThe LED array throws a crisp, evenly distributed red light that is more noticeable than many aging incandescent bulbs. This enhanced visibility helps following drivers spot braking earlier, especially in low-light or adverse weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality LED beads for brighter, consistent illumination\u003c\/li\u003e\n  \u003cli\u003eUniform light output reduces hot spots and dark zones\u003c\/li\u003e\n  \u003cli\u003eElevated mounting position enhances sightlines for trailing vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the HNeekyr 923-133 fit my Ford Edge?\u003c\/h3\u003e\n\u003cp\u003eThis assembly is manufactured to match OEM dimensions and electrical connections for Ford Edge model years 2015 through 2024. It is intended as a direct replacement for part numbers 923-133 and FT4Z13A613A, minimizing fitment issues and the need for adapters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Edge 2015–2024 model years\u003c\/li\u003e\n  \u003cli\u003eDirect plug-and-play connector — no cutting or splicing\u003c\/li\u003e\n  \u003cli\u003eEngineered to match factory mounting points and bracket geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does this stop light offer?\u003c\/h3\u003e\n\u003cp\u003eThe housing and lens are constructed from impact-resistant, weatherproof materials selected to withstand road debris, UV exposure, and moisture. LEDs have a long operational life and the sealed assembly limits corrosion on internal contacts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRugged, corrosion-resistant casing for extended service life\u003c\/li\u003e\n  \u003cli\u003eSealed construction to keep out water and contaminants\u003c\/li\u003e\n  \u003cli\u003eLED technology reduces heat and energy draw compared with older bulbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable accessing the rear liftgate area; the unit replaces the original lamp using the factory fasteners and wiring harness. No custom wiring or drilling is required, and basic hand tools are usually sufficient.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play connection to existing Edge wiring harness\u003c\/li\u003e\n  \u003cli\u003eNo vehicle modifications or special tools typically needed\u003c\/li\u003e\n  \u003cli\u003eKeeps original mounting points and appearance for a factory look\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The HNeekyr 923-133 LED third brake light is intended for Ford Edge owners who need a reliable, OEM-compatible replacement for a damaged or dim high-mount stop lamp. It's also a practical upgrade for drivers seeking improved rear signaling with longer-lasting LEDs and weather-resistant construction. Ideal for DIY installers, fleet vehicles, and anyone prioritizing safety and straightforward fitment without electrical modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace OEM part 923-133 and FT4Z13A613A?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the HNeekyr 923-133 is designed as a direct replacement for part numbers 923-133 and FT4Z13A613A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is wiring or drilling required for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No drilling or rewiring is needed; it installs with the factory connector and existing mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55168518455639,"sku":"B0F9YLRZHC","price":72.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-923-133-front-assembly.jpg?v=1790406359"},{"product_id":"hneekyr-hood-release-latch-kit-for-volvo-vn-vnl-2004-2018-4-piece-metal-upper-lower-latches","title":"HNeekyr Bonnet Release Latch Kit for Volvo VN VNL 2004–2018 — 4‑Piece Metal Upper \u0026 Lower Latches","description":"\u003cp\u003e\u003cstrong\u003eHNeekyr's 4-piece hood release latch kit replaces worn or broken hood latches on Volvo VN and VNL trucks from 2004 through 2018 to restore secure, factory-style hood operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Volvo VN\/VNL's hood no longer locks or releases reliably, this complete set provides both upper and lower latches engineered to match original equipment fit and function. The kit includes two upper latches plus one driver-side and one passenger-side lower latch, crafted from durable metal for long-lasting service under heavy-duty conditions. Installation is intended to be straightforward because each component is shaped to the OEM mounting points and replacement part numbers referenced by Volvo.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this latch kit fit my Volvo VN\/VNL truck?\u003c\/h3\u003e\n\n\u003cp\u003eThe set was designed to be compatible with Volvo VN and VNL model years 2004–2018 and replaces several common OEM part numbers. Before ordering, compare your existing latch part numbers or mounting pattern to ensure compatibility. These latches are direct-replacement style components that line up with stock bolt holes and cable routing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits Volvo VN and VNL 2004–2018 model years\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers 20498998, 20565619, 8074938\u003c\/li\u003e\n  \u003cli\u003eIncludes both upper and lower latches for complete replacement\u003c\/li\u003e\n  \u003cli\u003eEngineered to match original mounting and cable connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the materials and durability features of these latches?\u003c\/h3\u003e\n\n\u003cp\u003eEach latch in the HNeekyr kit is manufactured from high-strength metal designed to resist bending and wear from repeated use and road vibration. The robust construction minimizes the risk of deformation or premature failure compared with cheaper stamped components. These parts are intended for heavy-duty truck service where reliability matters day after day.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-strength metal construction for greater longevity\u003c\/li\u003e\n  \u003cli\u003eResistance to deformation under load and vibration\u003c\/li\u003e\n  \u003cli\u003eSuitable for commercial and fleet use\u003c\/li\u003e\n  \u003cli\u003eManufactured to withstand repeated hood cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what does the kit include?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is designed to be straightforward because the latches are shaped to align with the original equipment mounting points and bolt pattern. You’ll receive everything needed for a full hood latch refresh: two upper latches and one lower latch for each side. Basic hand tools and a few minutes per latch are typically all that’s required for replacement.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePackage contents: 2 upper latches, 1 driver-side lower latch, 1 passenger-side lower latch\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement design for OEM alignment\u003c\/li\u003e\n  \u003cli\u003eRequires common hand tools for removal and installation\u003c\/li\u003e\n  \u003cli\u003eRecommended to verify part numbers before installing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill replacing these latches improve hood security and performance?\u003c\/h3\u003e\n\n\u003cp\u003eSwapping out worn latches with this complete 4-piece kit restores the intended engagement and release behavior of the hood mechanism, improving both security and ease of operation. New latches help ensure the hood closes firmly and opens predictably when using the release cable. Regular inspection and timely replacement can prevent unexpected hood movement while driving.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRestores reliable hood engagement and release\u003c\/li\u003e\n  \u003cli\u003eReduces the chance of hood rattles or accidental opening\u003c\/li\u003e\n  \u003cli\u003eImproves driver confidence during road use\u003c\/li\u003e\n  \u003cli\u003eCompletes both driver and passenger side latch systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This HNeekyr hood release latch kit is intended for Volvo VN and VNL owners, fleet managers, and service technicians who need a full set of replacement latches for model years 2004–2018. It's a practical choice for anyone restoring proper hood operation after wear, damage, or failed factory components, and for workshops performing routine maintenance on heavy-duty Volvo trucks. Always confirm your truck's part numbers and inspect the hood latch cable and striker hardware when replacing latches to ensure best results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this kit compatible with my Volvo VN VNL from 2010?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit fits Volvo VN and VNL models from 2004 through 2018; verify existing part numbers 20498998, 20565619 or 8074938 to be certain.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include both upper and lower latches?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The set contains two upper latches plus one driver-side and one passenger-side lower latch for a complete replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HNeekyr","offers":[{"title":"Default Title","offer_id":55171224306007,"sku":"B0DM8SWHW2","price":78.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/hneekyr-hood-latch-kit-front-packaging.jpg?v=1790440814"}],"url":"https:\/\/britishgarage.co.uk\/collections\/hneekyr.oembed","provider":"British Garage","version":"1.0","type":"link"}