{"title":"JRready","description":"\u003cp\u003eBrowse 34 JRready products at British Garage, including lighting \u0026amp; electrical parts and ignition parts. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked UK delivery on every order and 30-day returns.\u003c\/p\u003e","products":[{"product_id":"jrready-2-pin-dt-connector-kit-dw1017-6-sets-ip68-waterproof-14-18-awg-nickel-plated-contacts","title":"JRready 2-Pin DT Connector Kit DW1017 — 6 Sets, IP68 Waterproof, 14–18 AWG, Nickel-Plated Contacts","description":"\u003cp\u003e\u003cstrong\u003eJRready DW1017 is a 2-pin Deutsch-style IP68 waterproof wiring connector kit with stamped size-16 contacts, supplied as six complete plug-and-socket sets for 14–18 AWG applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit provides rugged, industry-compatible DT connectors built from flame-retardant PA66 nylon and nickel-plated copper alloy contacts. It’s engineered for sealed electrical connections in challenging environments — dust, moisture, vibration — while remaining compatible with standard DT-series components used across automotive, marine, and off-highway equipment.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit keep electrical connections sealed in wet or dirty conditions?\u003c\/h3\u003e\n\n\u003cp\u003eThe DW1017 kit uses an improved seal-retention design at the plug end plus wedge locks that secure housings and contacts. Together those features maintain IP68-level protection and resist accidental pull-off, preventing ingress of dirt and water at the mating interface.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePA66 nylon housings with enhanced plug-end sealing geometry\u003c\/li\u003e\n  \u003cli\u003eEPDM-style seals and retention features compatible with standard DT parts\u003c\/li\u003e\n  \u003cli\u003eWedge locks prevent contact misalignment and secure the assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre the electrical contacts durable and easy to install?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the kit includes size-16 stamped and formed contacts made from nickel-plated copper alloy that deliver consistent conductivity and mechanical strength. These contacts are designed to crimp cleanly and seat reliably into the housings for repeatable installs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStamped\/form contacts (pin 1060-16-0122, socket 1062-16-0122)\u003c\/li\u003e\n  \u003cli\u003eWire range supported: 14–18 AWG (recommended 16–18 AWG typical)\u003c\/li\u003e\n  \u003cli\u003eMaximum current rating about 13 A per contact under specified conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how many connections can I make?\u003c\/h3\u003e\n\n\u003cp\u003eThe DW1017 kit contains six full 2-pin connector pairs plus the necessary wedge locks and stamped contacts, enabling six sealed two-conductor connections out of the box. All parts are supplied ready for crimping and assembly, so you can build or repair multiple harness runs quickly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e6 plugs and 6 plug wedge locks\u003c\/li\u003e\n  \u003cli\u003e6 receptacles and 6 receptacle wedge locks\u003c\/li\u003e\n  \u003cli\u003e12 pin contacts and 12 socket contacts (12 pairs total)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow resistant is the kit to temperature and mechanical stress?\u003c\/h3\u003e\n\n\u003cp\u003eHousings are molded from flame-retardant PA66 nylon rated for a wide temperature span and the stamped contacts withstand routine vibration and handling. The assembly is intended for long-term use where thermal cycling and mechanical stress are expected, within the material limits specified.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTemperature range: approximately -40°C to 125°C\u003c\/li\u003e\n  \u003cli\u003eFlame-retardant housing material improves durability and safety\u003c\/li\u003e\n  \u003cli\u003eDesigned for vibration-prone installations like vehicles and marine craft\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The JRready DW1017 kit is aimed at technicians, hobbyists, and manufacturers who need reliable, sealed 2-conductor connections for vehicles, trailers, marine equipment, off-highway machines, and industrial electronics. It’s suited to anyone repairing harnesses or building custom wiring runs that must withstand moisture, dust, and mechanical stress while remaining compatible with existing Deutsch DT-series components.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wire sizes work with these 2-pin DT connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit supports 14–18 AWG wires; typical installs use 16–18 AWG for best fit and performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these connectors compatible with other Deutsch DT series parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The DW1017 follows DT-series standards and is compatible with existing Deutsch DT housings and seals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55162262552919,"sku":"B0DGT6BQW5","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-dw1017-front-packaging.jpg?v=1790335584"},{"product_id":"jrready-deutsch-pin-extraction-tool-kit-10-piece-red-set-for-16-22-awg-non-conductive-tips-for-dtm-hdp20-hd30-drc","title":"JRready Deutsch pin extraction tool kit — 10-piece red set for 16–22 AWG, non-conductive tips for DTM\/HDP20\/HD30\/DRC","description":"\u003cp\u003e\u003cstrong\u003eJRready ST5222 is a 10-piece Deutsch-compatible pin extraction kit designed to remove and insert 16–22 AWG stamped and solid contacts from DTM, HDP20, HD30 and DRC connectors without harming wires or seals.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit supplies ten red plastic insertion-extraction tools (0411-240-2005) housed in a small protective box for easy transport and storage. Built for technicians, hobbyists and fleet mechanics, the tools are molded from heavy-duty plastic to disengage terminals in tight Deutsch-style housings while protecting connector bodies, insulation and seals. The set covers common 16–22 AWG automotive wires used on motorcycles, cars, trucks, marine craft and agricultural equipment.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit remove Deutsch stamped and solid contacts safely?\u003c\/h3\u003e\n\u003cp\u003eEach tool tip is shaped to reach the terminal tangs inside Deutsch plugs and depress the retention feature so pins can be pulled out cleanly. The plastic construction minimizes risk of shorted circuits, connector gouging or seal damage that metal picks can cause.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-molded tips designed for Deutsch DTM\/HDP20\/HD30\/DRC terminal tangs.\u003c\/li\u003e\n  \u003cli\u003eNon-conductive heavy-duty plastic reduces risk of electrical contact during service.\u003c\/li\u003e\n  \u003cli\u003eWorks on both stamped and solid contacts within the 16–22 AWG range.\u003c\/li\u003e\n  \u003cli\u003eSmall profile reaches pins in deep or crowded cavities without widening the aperture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these tools fit my connector and which wires are supported?\u003c\/h3\u003e\n\u003cp\u003eThe kit targets Deutsch-family connectors used widely in automotive and equipment wiring and is intended for terminals sized for 16–22 AWG wire. Because terminal geometry can vary, confirm your connector type and terminal diameter before use to avoid mismatches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Deutsch DTM, HDP20, HD30 and DRC families commonly found on vehicles and machinery.\u003c\/li\u003e\n  \u003cli\u003eDesigned for 16–22 AWG stamped and solid contacts — check terminal size if uncertain.\u003c\/li\u003e\n  \u003cli\u003eIf unsure, provide terminal diameter and connector aperture details to the seller for confirmation.\u003c\/li\u003e\n  \u003cli\u003eUsing an incorrect tool risks damaging the connector or failing to disengage the pin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the kit organized and what makes it convenient for field work?\u003c\/h3\u003e\n\u003cp\u003eThe ten red tools come in a compact, sturdy plastic box that keeps components together and protected from shop grime. The small footprint fits in tool bags, glove boxes or service kits for fast on-site repairs and diagnostics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProtective storage box reduces loss and protects tool tips from deformation.\u003c\/li\u003e\n  \u003cli\u003eBright red color improves visibility in dim engine bays or tool chests.\u003c\/li\u003e\n  \u003cli\u003eLightweight plastic keeps the set portable for mobile technicians.\u003c\/li\u003e\n  \u003cli\u003eTen-piece supply gives spares for multiple repairs or shared shop use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat precautions should I take when using the pin extractor tools?\u003c\/h3\u003e\n\u003cp\u003eFollow standard electrical service safety: disconnect power before working on live circuits and verify connector orientation to avoid forcing a tool into the wrong cavity. Work slowly to avoid bending or nicking wires, and stop if a pin won’t free—re-check retention tang engagement and connector locking features.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlways de-energize circuits before extracting or inserting terminals.\u003c\/li\u003e\n  \u003cli\u003eConfirm you’re using the correct tool for the terminal to prevent damage.\u003c\/li\u003e\n  \u003cli\u003eUse gentle, steady pressure; avoid twisting motions that may harm seals.\u003c\/li\u003e\n  \u003cli\u003eContact seller with terminal dimensions if extraction problems occur.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? JRready ST5222 suits vehicle electricians, fleet service techs, DIY mechanics and equipment maintenance teams who regularly service Deutsch-style connectors and need a reliable, nondamaging extraction option for 16–22 AWG stamped and solid contacts. If you handle wiring on motorcycles, cars, trucks, marine vessels or agricultural machinery and want a portable, inexpensive set to remove and replace pins without harming connectors or seals, this kit is built for that job.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these tools safe for Deutsch DTM connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The JRready tools are molded to release retention tangs on Deutsch DTM, HDP20, HD30 and DRC connectors for 16–22 AWG contacts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the plastic tips damage seals or wires?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Unlikely. The heavy-duty plastic tips are non-conductive and designed to remove pins without cutting insulation or deforming connector seals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55162579779927,"sku":"B0CLTPD18C","price":29.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-st5222-front-view.jpg?v=1790337524"},{"product_id":"jrready-dtp-2-pin-waterproof-connector-kit-2-sets-with-size-12-contacts-12-14-awg-25a-rated","title":"JRready DTP 2-Pin Waterproof Connector Kit — 2 Sets with Size 12 Contacts, 12–14 AWG, 25A Rated","description":"\u003cp\u003e\u003cstrong\u003eJRready ST6138 is a two-set, 2-pin waterproof DTP connector kit with durable PA66 housings and size-12 solid contacts for 12–14 AWG wiring.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit supplies two complete DTP 2-pin connectors plus a full complement of crimp-ready terminals so you can make reliable, weather-resistant power and signal connections on vehicles, boats, ATVs, and industrial equipment. The nylon housings resist moisture and abrasion while the heavy-duty size 12 contacts deliver strong conductivity and a 25-amp continuous rating when installed correctly. The parts are designed for repeated connect\/disconnect cycles and for use with standard crimp and removal tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this connector kit hold up outdoors and in vehicles?\u003c\/h3\u003e\n\u003cp\u003eThe housing is molded from PA66 nylon for chemical and moisture resistance, and the mating design includes wedgelocks that keep pins and sockets secure. That combination helps the connectors resist vibration, rain, and road splash when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePA66 nylon housings for abrasion and moisture resistance\u003c\/li\u003e\n  \u003cli\u003eWedgelock retention prevents accidental contact loss\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeated connect\/disconnect cycles without deformation\u003c\/li\u003e\n  \u003cli\u003eSuitable for marine splashes, automotive mounting locations, and off-road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat wires and current levels are supported?\u003c\/h3\u003e\n\u003cp\u003eThis kit includes size-12 solid contacts rated for a continuous 25 A when crimped to 12–14 AWG conductors. Use the recommended crimp tool and proper insulation-stripping technique to achieve full electrical performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid contacts sized for 12 AWG and 14 AWG wire\u003c\/li\u003e\n  \u003cli\u003e25-amp continuous capacity per contact when properly crimped\u003c\/li\u003e\n  \u003cli\u003eWorks with stranded or solid conductors of the specified AWG range\u003c\/li\u003e\n  \u003cli\u003eRecommended crimp tools: JRD-HDT-48 or equivalent for reliable crimps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do I get in the kit and what tools are recommended?\u003c\/h3\u003e\n\u003cp\u003eThe package contains two assembled DTP 2-pin connector housings plus four pairs of terminals (pins and sockets) so you can wire both connectors. For best results, use a purpose-built crimping tool and a wedgelock removal tool when servicing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 × DTP 2-pin connector housings (male and female pairs)\u003c\/li\u003e\n  \u003cli\u003e4 pairs size-12 terminals (4 pins and 4 sockets) ready for crimping\u003c\/li\u003e\n  \u003cli\u003eRecommended: JRD-HDT-48 crimp tool for 14–12 AWG, DRK-RT1B pick for wedgelock removal\u003c\/li\u003e\n  \u003cli\u003eClear pin\/socket labeling and simple insertion\/removal sequence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward when wires are stripped to the correct length, the contact is properly crimped, and the contact is fully seated into the housing until the wedgelock engages. For field service, use the recommended pick tool to extract contacts without damaging the housing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStrip insulation to recommended length, crimp with JRD-HDT-48\u003c\/li\u003e\n  \u003cli\u003eInsert contacts until wedgelock clicks; confirm retention by pull test\u003c\/li\u003e\n  \u003cli\u003eUse DRK-RT1B pick tool to remove wedgelocks\/contacts during repairs\u003c\/li\u003e\n  \u003cli\u003ePeriodic visual checks and contact cleaning improve lifespan\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians, installers, and DIYers who need a compact, weather-resistant 2-pin connector solution for automotive, marine, motorcycle, or light industrial wiring. If you require reliable power or signal connections for 12–14 AWG conductors and prefer field-serviceable connectors with replaceable solid contacts, this JRready ST6138 kit provides the parts and form factor to complete small harnesses, repair existing plugs, or build custom cable runs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these connectors be used on marine boats?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The PA66 nylon housings and wedgelock retention resist splash and vibration, making them suitable for many marine applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What crimp tool should I use for 12–14 AWG?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use the JRD-HDT-48 or an equivalent crimp tool rated for 14–12 AWG to ensure secure 25 A-capable crimps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55164049195351,"sku":"B08K4GXRCN","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-dtp-front-view.jpg?v=1790349356"},{"product_id":"jrready-st5211-pin-removal-tool-kit-for-weather-pack-metri-pack-connectors-multi-head-extraction-and-insertion-set","title":"JRready ST5211 Pin Removal Tool Kit for Weather Pack \u0026 Metri-Pack Connectors — Multi-head Extraction and Insertion Set","description":"\u003cp\u003e\u003cstrong\u003eThe JRready ST5211 Pin Removal Tool KIT is a compact, multi-head extraction and insertion set built to remove and reinstall Weather Pack, Metri-Pack, AMP Superseal and common automotive connector pins and terminals.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit combines several specialized extraction tools so automotive technicians, electricians and DIYers can service electrical connector harnesses without damaging housings or terminals. The assortment covers a broad range of common automotive connector families and gauges, making it useful for wiring repair, harness rebuilds, and terminal replacement tasks.\u003c\/p\u003e\n\n\u003ch3\u003eWhich connector types and wire gauges does this kit support?\u003c\/h3\u003e\n\u003cp\u003eThe ST5211 kit includes dedicated tools that fit many widely used connector series and terminal sizes. Each tool is shaped to release retention tangs or guide pins back through the housing safely.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDRK-DWP01: designed for 16–18 AWG Weather Pack terminals.\u003c\/li\u003e\n  \u003cli\u003eDRK-DMP280: compatible with GT 150\/280 and 150\/280 Metri-Pack varieties plus 280 tangless styles.\u003c\/li\u003e\n  \u003cli\u003eDRK-DMP630: works with 56, 280, 480, 630 and some 800 Metri-Pack male tangless terminals.\u003c\/li\u003e\n  \u003cli\u003eDRK-785084: AMP Superseal 1.5mm insertion\/extraction tool for secondary housing locks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit protect connectors during removal and reuse?\u003c\/h3\u003e\n\u003cp\u003eEach tool is engineered to engage retention features without bending pins or cracking plastic housings, reducing the risk of connector damage during maintenance. The specific tips and profiles allow precise disengagement of locks and tangs so terminals can be removed and re-seated cleanly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThin insertion blades release secondary locks without prying housings apart.\u003c\/li\u003e\n  \u003cli\u003eShaped tips accommodate tangless and tang-style terminals for safe extraction.\u003c\/li\u003e\n  \u003cli\u003eTools fit tight connector cavities to avoid scraping or deforming pins.\u003c\/li\u003e\n  \u003cli\u003eReplacements can be reinserted and latched back into position after crimp repair.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical tasks can I complete with the ST5211 kit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is suited for on-vehicle repairs, bench harness work, and electrical diagnostics where terminals must be removed or replaced. Use it when swapping a damaged pin, repinning connectors, or when diagnosing intermittent circuits by isolating terminals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove and replace individual pins without cutting the entire harness.\u003c\/li\u003e\n  \u003cli\u003eService lamp sockets, sensor connectors, and ECU harnesses with matching connector types.\u003c\/li\u003e\n  \u003cli\u003eAssist in terminal crimping\/repair workflows by enabling access to individual wires.\u003c\/li\u003e\n  \u003cli\u003ePrepare harnesses for upgrades or custom wiring projects safely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The JRready ST5211 is made for mechanics, fleet technicians, automotive electricians, restorers and serious DIYers who frequently work on vehicle wiring. If you repair or modify connectors from Weather Pack, Metri-Pack or AMP Superseal families, this kit reduces risk of connector damage and speeds terminal service. For those who need wider coverage, pair it with compatible crimpers and replacement terminals to complete professional-quality repairs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the kit remove tangless Metri-Pack terminals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The ST5211 includes tools (DRK-DMP280 and DRK-DMP630) designed for tangless and tang-style Metri-Pack terminals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this kit safe for reuse of connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The shaped tips release retention tangs without deforming housings, allowing terminals to be reinserted and reused.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55166606573911,"sku":"B09B4WJVWW","price":37.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-kit-front-layout.jpg?v=1790368920"},{"product_id":"jrready-deutsch-dtp-2-wire-pigtail-connector-kit-2-sets-10awg-ul3266-with-ip68-waterproof-seals","title":"JRready Deutsch DTP 2-Wire Pigtail Connector Kit — 2 Sets, 10AWG UL3266 with IP68 waterproof seals","description":"\u003cp\u003e\u003cstrong\u003eJRready ST9031 Deutsch 2-wire DTP pigtail connector kit provides two complete 10AWG male-and-female pairs with UL3266 wiring for durable, waterproof vehicle and industrial electrical connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit supplies two male and two female Deutsch DTP 2-pin connectors pre-crimped to 15cm UL3266 10AWG leads, plus user manuals for straightforward installation. Built from PA66 nylon housings and tinned-copper conductors, the assembly is engineered for demanding conditions where reliable high-current wiring and environmental protection matter.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the JRready DTP connector withstand harsh outdoor conditions?\u003c\/h3\u003e\n\u003cp\u003eThe JRready DTP connectors are built with flame-retardant PA66 nylon housings and robust sealing rings that deliver an IP68-level defense against dust, water, and oil. Tinned copper conductors resist oxidation while the UL3266 wire insulation tolerates broad temperature swings, helping the pair maintain electrical integrity over time.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIP68-rated sealing for full dust protection and water immersion resistance\u003c\/li\u003e\n\u003cli\u003ePA66 nylon housing with UL94-V0 flame-retardant rating\u003c\/li\u003e\n\u003cli\u003eTinned copper cores reduce corrosion and maintain conductivity\u003c\/li\u003e\n\u003cli\u003eWire insulation rated -40°C to 125°C for wide temperature use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical specifications and load can I expect from these 10AWG pigtails?\u003c\/h3\u003e\n\u003cp\u003eThese pigtail leads use 10AWG UL3266 wire and tinned copper conductors to handle substantial current loads safely. The wiring is rated for up to 300V and is sized to keep voltage drop low on short runs typical for lighting, motors, or accessory power feeds.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10AWG wire size for higher current capacity\u003c\/li\u003e\n\u003cli\u003eRated voltage: 300V for typical vehicle and marine circuits\u003c\/li\u003e\n\u003cli\u003eUL3266 insulation for consistent electrical performance\u003c\/li\u003e\n\u003cli\u003eTinned copper for improved conductivity and oxidation resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation for hobbyists or professional mechanics?\u003c\/h3\u003e\n\u003cp\u003eJRready includes user manuals that guide you through mating the male and female DTP housings, seating the seals, and securing the pigtail leads. The kit arrives pre-wired to 15cm lengths, minimizing preparation steps and making it faster to integrate into lighting, trailer, or engine-bay wiring than building a harness from scratch.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupplied with 15cm pre-attached 10AWG leads for immediate use\u003c\/li\u003e\n\u003cli\u003eClear user manuals to assist both beginners and pros\u003c\/li\u003e\n\u003cli\u003ePlug-and-play Deutsch DTP form factor for secure mating\u003c\/li\u003e\n\u003cli\u003eCompact connectors simplify tight-space installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat applications are best suited for these Deutsch 2-pin connectors?\u003c\/h3\u003e\n\u003cp\u003eThese 2-pin DTP pigtails are commonly used where a compact, waterproof, high-current connection is required. They are suitable for automotive lighting, off-road LED bars, marine accessories, trailer electronics, and other industrial or racing uses where exposure to moisture, vibration, and contaminants is expected.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLED light bars, utility lighting, and auxiliary vehicle power\u003c\/li\u003e\n\u003cli\u003eMarine and boat electrical systems needing waterproof connections\u003c\/li\u003e\n\u003cli\u003eOff-road vehicles, trucks, and trailers exposed to dirt and water\u003c\/li\u003e\n\u003cli\u003eIndustrial or racing electrical harnesses requiring durable mates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The JRready ST9031 Deutsch DTP pigtail kit is ideal for vehicle owners, installers, and technicians who need dependable 2-pin, high-current connections in wet or dirty environments. It suits DIYers upgrading lighting or power accessories and professionals building rugged harnesses—anyone who needs pre-wired, UL-rated 10AWG leads with proven environmental protection.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these connectors waterproof enough for marine use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit’s IP68-rated seals and PA66 housings protect against dust and water immersion, suitable for marine and wet environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the pigtails come pre-crimped and ready to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each male and female connector includes 15cm pre-attached 10AWG UL3266 leads and user manuals for quick installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55166663360855,"sku":"B0F1TLCBTL","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-dtp-front-view_7748f2b1-c001-4aac-839b-b3e8560e73cf.jpg?v=1790369671"},{"product_id":"jrready-4-pin-dt-connector-kit-3-sets-14-16-awg-waterproof-nylon-housings-sealed-terminals","title":"JRready 4-Pin DT Connector Kit, 3 Sets — 14–16 AWG Waterproof Nylon Housings \u0026 Sealed Terminals","description":"\u003cp\u003e\u003cstrong\u003eJRready ST6114 DT is a three-set kit of 4-pin waterproof automotive connectors with matched solid terminals and seal plugs for 14–16 AWG wiring.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis JRready connector kit bundles durable PA66 nylon housings with precision metal terminals and silicone seal plugs to create reliable 4-cavity connections for vehicles, boats, motorcycles and other outdoor equipment. Designed for repeated connect\/disconnect cycles, the components are sized for 14–16 AWG solid wires (and compatible with a wider AWG range), and the kit includes everything needed for assembling multiple inline joins or replacements.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this connector kit ensure a weather-resistant electrical joint?\u003c\/h3\u003e\n\n\u003cp\u003eThe housing is molded from PA66 nylon and uses individual silicone seal plugs for each cavity, creating a water-shedding barrier around each wire entry. The terminal fit is engineered to lock inside the cavity, minimizing movement and exposure where moisture could intrude.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePA66 nylon housing resists heat, oil, and moisture.\u003c\/li\u003e\n  \u003cli\u003eIndividual silicone seal plugs for each wire entry point.\u003c\/li\u003e\n  \u003cli\u003ePrecision-fit terminals lock into housings to reduce gaps.\u003c\/li\u003e\n  \u003cli\u003eDurable latch profile for secure mating in rough environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat wire sizes and terminal types are compatible with the ST6114 DT kit?\u003c\/h3\u003e\n\n\u003cp\u003eThe included male and female solid terminals are optimized for 14–16 AWG solid conductors but accept a broader range (up to 20 AWG) when properly crimped. These pins are designed for high conductivity and stable contact pressure, producing a reliable electrical path once crimped and seated.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRecommended for 14–16 AWG solid wires (compatible to 20 AWG in some uses).\u003c\/li\u003e\n  \u003cli\u003eIncludes matched male and female terminal sets for polarized connections.\u003c\/li\u003e\n  \u003cli\u003eTerminals engineered for consistent contact pressure and low resistance.\u003c\/li\u003e\n  \u003cli\u003eWorks with standard crimp tools for solid-wire applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich tools and techniques make installation easier and more reliable?\u003c\/h3\u003e\n\n\u003cp\u003eProper crimping and secure removal or insertion of contacts improves longevity. JRready recommends specific tools for removal of wedge locks and for consistent crimp quality, and following standard preparation steps will prevent common installation errors.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUse a 4-way crimp tool (example: JRD-HDT-48) for even crimps and reliable mechanical\/electrical joints.\u003c\/li\u003e\n  \u003cli\u003eEmploy a pick removal tool (example: DRK-RT1B) to extract wedgelocks and contacts without damage.\u003c\/li\u003e\n  \u003cli\u003eStrip the conductor to the correct length and verify insulation-nose seating before final insertion.\u003c\/li\u003e\n  \u003cli\u003eVerify polarity and fit before subjecting the assembly to vibration or moisture exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere is this connector kit best used in vehicles and equipment?\u003c\/h3\u003e\n\n\u003cp\u003eThese 4-pin connector sets are suitable wherever a small, sealed multi-pin connection is required: lighting harnesses, sensor links, accessory feeds, and marine or motorcycle wiring. Their compact, three-set package makes them handy for repairs, upgrades, or custom wiring runs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHeadlights, auxiliary lamps, and lighting harnesses.\u003c\/li\u003e\n  \u003cli\u003eSensors, switches, and small actuator connections.\u003c\/li\u003e\n  \u003cli\u003eMotorcycle, marine, truck, and off-road electrical systems.\u003c\/li\u003e\n  \u003cli\u003eCustom junction points in aftermarket wiring jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians, hobbyists, and DIY mechanics who need a small batch of robust 4-pin sealed connectors for repairs or new wiring projects. If you install or maintain vehicle or marine electrics and want a kit that includes housings, matched solid terminals and seal plugs, this JRready ST6114 DT 3-set pack provides the core components for reliable sealed connections without sourcing individual pieces.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the terminals accept stranded wire or only solid wire?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Terminals are optimized for 14–16 AWG solid wire; stranded wire can be used if properly tinned or with a suitable ferrule.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the connectors rated for outdoor or marine use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Housings are PA66 with silicone seals for splash and moisture resistance, suitable for many outdoor and marine applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55166829494615,"sku":"B07VF2X3WC","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-st6114-dt-connector-front-view.jpg?v=1790372023"},{"product_id":"jrready-deutsch-dt-2-pin-connector-kit-st6328-2-5-sets-with-solid-nickel-contacts-waterproof-pa66-housings","title":"JRready Deutsch DT 2‑Pin Connector Kit ST6328-2 — 5 Sets with Solid Nickel Contacts, Waterproof PA66 Housings","description":"\u003cp\u003e\u003cstrong\u003eJRready ST6328-2 is a complete Deutsch DT 2‑pin connector kit that includes five fully assembled, water‑resistant connector sets with solid nickel‑plated contacts and accessory parts for reliable automotive and industrial wiring.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit bundles the commonly used DT04\/DT06 housings with solid male and female terminals, seals, wedgelocks and mounting clips so you can assemble durable 2‑pin Deutsch DT connectors on vehicles or equipment. The components are made from flame‑retardant PA66 nylon and nickel‑plated copper contacts rated for typical 14–20 AWG wiring; the kit is engineered for field repairs, custom harness building and retrofit work where a tight, waterproof connection is required.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly is included in the JRready ST6328-2 kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies everything needed to make up to five 2‑pin DT connectors plus spare contacts and accessories for several repairs or installations. Parts are organized to let you crimp or solder depending on your preference.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5 DT04‑2P male housings and 5 DT06‑2S female housings\u003c\/li\u003e\n  \u003cli\u003e12 male and 12 female solid contacts (0460‑215‑16141 \/ 0462‑209‑16141)\u003c\/li\u003e\n  \u003cli\u003e5 orange wedgelocks (W2S) and 5 green wedgelocks (W2P)\u003c\/li\u003e\n  \u003cli\u003e5 seal plugs, 2 mounting clips and 1 connector removal tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weatherproof are these Deutsch DT connectors?\u003c\/h3\u003e\n\u003cp\u003eHousings are molded from PA66 nylon with a UL94‑V0 flame rating and the contacts use tin bronze with nickel plating for corrosion resistance. The design and included seal plugs provide a water‑resistant joint suitable for under‑hood and exterior vehicle applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePA66 nylon housings resist heat and mechanical wear\u003c\/li\u003e\n  \u003cli\u003eNickel‑plated copper contacts for low corrosion and reliable conductivity\u003c\/li\u003e\n  \u003cli\u003eSeal plugs and wedgelocks ensure a secure, moisture‑resistant assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat wire sizes and electrical loads are supported?\u003c\/h3\u003e\n\u003cp\u003eContacts are rated up to 13 A maximum and accept conductor sizes from 14 to 20 AWG, making them useful for many sensor, solenoid and small‑load circuits. Both crimping and soldering are supported to match installer preference and application needs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCurrent rating: 13 A (maximum per contact)\u003c\/li\u003e\n  \u003cli\u003eCompatible wire sizes: 14–20 AWG\u003c\/li\u003e\n  \u003cli\u003eCrimp or solder terminations supported for flexibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich tools and techniques work best when assembling these connectors?\u003c\/h3\u003e\n\u003cp\u003eFor consistent crimps use a dedicated Deutsch pin crimping tool; JRready recommends the ACT‑DT1 tool for the turned pin\/socket contacts supplied. The kit also includes a removal tool to aid service and disassembly without damaging housings or seals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended tool: JRready ACT‑DT1 crimper for 12#, 16#, 20# contacts\u003c\/li\u003e\n  \u003cli\u003eUse the included removal tool to extract contacts safely\u003c\/li\u003e\n  \u003cli\u003eApply proper back‑strain relief and wedgelock seating for long life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians, mechanics and DIY installers who build or repair vehicle and equipment wiring harnesses will find this kit practical. It’s especially useful for fleet maintenance, off‑highway equipment, marine and motorcycle electrical work where a compact, waterproof 2‑pin Deutsch DT connector is required. The kit’s assortment of spare contacts, wedgelocks and seals makes it a convenient field or shop supply for repeated repairs and custom harness assemblies.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I crimp and solder these contacts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The solid contacts support both crimping and soldering for flexible termination options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wire sizes do the contacts accept?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They accept 14–20 AWG wires and are rated to a maximum of 13 A per contact.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55166959386967,"sku":"B09ZYDT58G","price":37.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-dt-2pin-front-view.jpg?v=1790373386"},{"product_id":"jrready-deutsch-dtm-2-pin-connector-kit-4-sets-solid-size-20-contacts-waterproof-and-vibration-resistant","title":"JRready Deutsch DTM 2‑Pin Connector Kit (4 Sets) — Solid Size‑20 Contacts, Waterproof and Vibration‑Resistant","description":"\u003cstrong\u003eJRready ST6330-2 is a 4‑set Deutsch DTM 2‑pin connector kit with size‑20 solid contacts, wedgelocks and seal plugs designed for durable, waterproof vehicle electrical connections.\u003c\/strong\u003e\n\u003cp\u003eThis compact kit supplies everything you need to build reliable 2‑pin Deutsch DTM terminations for motorcycles, cars, ATVs, boats and other equipment exposed to vibration, moisture and engine-heat. JRready includes both plug and receptacle housings, solid size‑20 copper‑nickel contacts rated for typical small‑wire circuits, wedgelocks for secure retention and seal plugs to block unused cavities. The housings are molded from PA66 nylon for long service life and resistance to oils and salts.\u003c\/p\u003e\n\n\u003ch3\u003eWhat parts come in the JRready ST6330-2 kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit is complete for assembling four mated Deutsch DTM 2‑pin connections and offers replacement parts for repairs. Each component is sized and selected for ease of assembly and field service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4 pairs DTM 2‑pin housings (DTM06‑2S plug \/ DTM04‑2P receptacle)\u003c\/li\u003e\n  \u003cli\u003e8 pairs size‑20 solid contacts (0460‑202‑20141 \/ 0462‑201‑20141)\u003c\/li\u003e\n  \u003cli\u003e4 wedgelocks for plugs and 4 wedgelocks for receptacles\u003c\/li\u003e\n  \u003cli\u003e4 seal plugs to close unused cavities\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the size‑20 solid contacts perform and fit wires?\u003c\/h3\u003e\n\u003cp\u003eJRready supplies solid size‑20 contacts made from a copper‑nickel alloy chosen for conductivity and mechanical strength. They accept 20–22 AWG conductors and are designed for repeated crimping without surface cracking when proper tools are used.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWire range: 20–22 AWG, suitable for common sensor and accessory circuits\u003c\/li\u003e\n  \u003cli\u003eContinuous current capacity: approximately 7.5 A per contact\u003c\/li\u003e\n  \u003cli\u003eSpecial surface treatment reduces crimp cracking and improves reliability\u003c\/li\u003e\n  \u003cli\u003eSolid (non‑solder) contacts for secure crimp connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre the connector housings weatherproof and durable?\u003c\/h3\u003e\n\u003cp\u003eHousings are injection‑molded from PA66 nylon, a high‑strength engineering plastic resistant to wear, heat and many automotive fluids. The mating geometry, wedgelocks and included seals create a water‑resistant interface suitable for under‑hood and marine applications when assembled correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: PA66 nylon for mechanical strength and insulation\u003c\/li\u003e\n  \u003cli\u003eIncludes wedgelocks to prevent contact back‑out under vibration\u003c\/li\u003e\n  \u003cli\u003eSeal plugs close unused cavities to keep out water and contaminants\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeated connect\/disconnect cycles without deformation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere can these DTM 2‑pin connectors be used safely?\u003c\/h3\u003e\n\u003cp\u003eThe kit is aimed at low‑to‑moderate current circuits in vehicles and marine craft where compact, waterproof two‑pin connections are required. Typical uses include sensors, lighting, small actuators and accessory wiring near engines or in exposed locations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMotorcycles, scooters and ATVs — harness repairs and aftermarket additions\u003c\/li\u003e\n  \u003cli\u003eCars and trucks — sensors, auxiliary lighting and under‑hood connections\u003c\/li\u003e\n  \u003cli\u003eMarine applications and jetskis — corrosion‑resistant housings and seals\u003c\/li\u003e\n  \u003cli\u003eCaravans, trailers and off‑road equipment needing compact waterproof plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: JRready ST6330-2 is ideal for hobbyists, mechanics and installers who need a small quantity of high‑quality Deutsch DTM 2‑pin connectors for repair, prototype or retrofit work. Choose this kit when you want OEM‑style housings, durable size‑20 solid contacts sized for 20–22 AWG wiring, and the convenience of wedgelocks and seal plugs included so assemblies remain secure in vibration, moisture and salt‑spray environments.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wire sizes fit these JRready DTM size‑20 contacts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They accept 20–22 AWG conductors, suitable for small sensor and accessory circuits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the connectors waterproof for under‑hood or marine use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—PA66 housings, wedgelocks and seal plugs provide water resistance when assembled correctly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55166960501079,"sku":"B0B1ZFYG8K","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-dtm-2pin-front-packaging.jpg?v=1790373460"},{"product_id":"jrready-deutsch-dtp-2-wire-pigtail-connector-kit-12awg-2-sets-ip68-weatherproof-pa66-nylon","title":"JRready Deutsch DTP 2-Wire Pigtail Connector Kit 12AWG, 2 Sets — IP68 Weatherproof, PA66 Nylon","description":"\u003cp\u003e\u003cstrong\u003eJRready ST9032 Deutsch DTP 2-wire pigtail connector kit supplies two complete 12AWG male and female harnesses for durable, waterproof power connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit brings factory-style Deutsch DTP two-pin connectors in a ready-to-install pigtail format, shipped as two sets (each set: one male and one female, each with 15cm UL3266 12AWG leads). Built from PA66 nylon housings, tinned-copper conductors and IP68-rated seals, the ST9032 parts are tailored for applications that need compact, weatherproof, high-current wiring where reliable connectivity and corrosion resistance matter.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit handle harsh environments?\u003c\/h3\u003e\n\u003cp\u003eThe JRready Deutsch DTP connectors are engineered for tough conditions: PA66 nylon housings resist heat, wear and chemicals while UL94-V0 flame-retardant material reduces fire risks in high-temperature situations. IP68-rated rubber seals protect the contacts from dust, moisture and oil, so the connectors sustain performance even in wet or dirty environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP68-rated rubber sealing rings block water and contaminants\u003c\/li\u003e\n  \u003cli\u003ePA66 nylon body offers heat and abrasion resistance\u003c\/li\u003e\n  \u003cli\u003eTinned copper conductors reduce oxidation in salty or humid conditions\u003c\/li\u003e\n  \u003cli\u003eFlame-retardant UL94-V0 housing for added safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these pigtails support higher current loads and automotive use?\u003c\/h3\u003e\n\u003cp\u003eYes — the kit uses 12AWG UL3266 wire with a tinned-copper core, sized to carry substantial current for lights, pumps, or accessories. The wires are rated to 300V and endure -40°C to 125°C, making them appropriate for vehicles, boats and off-road gear where thermal range and current capacity are important.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12AWG wire diameter for higher current capacity\u003c\/li\u003e\n  \u003cli\u003eUL3266 certification for reliable insulation and performance\u003c\/li\u003e\n  \u003cli\u003e300V rated voltage suitable for many automotive circuits\u003c\/li\u003e\n  \u003cli\u003e-40°C to 125°C temperature rating for extreme environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation for a DIYer or a pro?\u003c\/h3\u003e\n\u003cp\u003eThe ST9032 kit is delivered as full pigtails with 15cm pre-attached leads, so there is no crimping or soldering of the Deutsch housing required if you plan to splice into your wiring. A user manual is included to walk through mating, sealing and optional strain-relief steps, which shortens installation time for beginners and speeds repeat jobs for technicians.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrewired 15cm leads reduce prep work and wiring errors\u003c\/li\u003e\n  \u003cli\u003eUser manual guides quick mating and sealing procedures\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play mating halves minimize assembly time\u003c\/li\u003e\n  \u003cli\u003eCompact form factor fits tight mounting spaces without adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat equipment and projects are these connectors best suited for?\u003c\/h3\u003e\n\u003cp\u003eDesigned for rugged, high-current two-pin connections, the JRready DTP pigtails fit many automotive and marine projects such as LED light bars, auxiliary power lines, pumps and sensors. Their compact Deutsch form, combined with IP68 protection and robust wire, makes them popular in racing, off-road, industrial and outdoor electrical systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLED light bars and auxiliary vehicle lighting\u003c\/li\u003e\n  \u003cli\u003eMarine bilge pumps and deck electronics\u003c\/li\u003e\n  \u003cli\u003eOff-road accessories, winches and power modules\u003c\/li\u003e\n  \u003cli\u003eIndustrial sensors and low-voltage power runs requiring weatherproofing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The JRready ST9032 Deutsch DTP 2-wire pigtail connector kit is aimed at vehicle owners, mechanics, electricians and hobbyists who need factory-style, weatherproof two-pin wiring with higher current capacity. Choose this kit when you want durable, prewired connections that resist corrosion, handle temperature extremes and simplify installation for aftermarket lights, marine equipment or industrial accessories.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these Deutsch DTP pigtails fully waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The ST9032 uses IP68-rated seals to resist dust, moisture and oil for reliable outdoor use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the wires require additional crimping or soldering?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Each connector comes prewired with 15cm UL3266 12AWG leads, ready to splice or install.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55166971806039,"sku":"B0F1TLC26M","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-dtp-front-facing-pair.jpg?v=1790373900"},{"product_id":"jrready-deutsch-dtm-3-pin-connector-kit-st6330-3-4-sets-solid-size-20-contacts-waterproof","title":"JRready Deutsch DTM 3-Pin Connector Kit ST6330-3 — 4 Sets, Solid Size-20 Contacts, Waterproof","description":"\u003cp\u003e\u003cstrong\u003eJRready ST6330-3 is a 3-pin Deutsch DTM connector kit that provides four waterproof connector pairs with solid size-20 contacts, wedgelocks, and seal plugs for reliable vehicle and marine electrical connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit bundles everything needed to build durable, weatherproof three-pin harnesses: four DTM 3-pin plug\/receptacle pairs plus the matching solid copper-nickel contacts, wedgelocks for secure pin retention, and spare seal plugs. Designed for installations near engines, under hoods, or exposed to moisture, the components are molded from PA66 nylon for ruggedness and include solid contacts rated for continuous use on 20–22 AWG wire.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit keep connections waterproof and secure?\u003c\/h3\u003e\n\u003cp\u003eThe DTM housings are engineered with sealed cavities and molded nylon bodies that resist moisture and contaminants. Combined with rubber or polymer seal plugs and wedgelocks, the assembly minimizes water intrusion and prevents pins from backing out under vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePA66 nylon housings with molded recesses for seals\u003c\/li\u003e\n  \u003cli\u003eIndividual seal plugs to close unused cavities\u003c\/li\u003e\n  \u003cli\u003eWedgelocks for mechanical retention of contacts\u003c\/li\u003e\n  \u003cli\u003eDesign intended for wet or vibration-prone environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical performance can I expect from the solid contacts?\u003c\/h3\u003e\n\u003cp\u003eThe included size-20 solid contacts are made from a copper-nickel alloy for stable conductivity and corrosion resistance. They accept 20–22 AWG wire and are rated for approximately 7.5 amps continuous, making them suitable for lighting, sensors, actuators, and other low-to-moderate current circuits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid contacts for consistent crimp and reduced micro-motion\u003c\/li\u003e\n  \u003cli\u003eCompatible with 20–22 AWG conductor sizes\u003c\/li\u003e\n  \u003cli\u003eApproximately 7.5 A continuous current capacity per contact\u003c\/li\u003e\n  \u003cli\u003eSurface-treated to reduce cracking during crimping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is assembly and what tools are recommended?\u003c\/h3\u003e\n\u003cp\u003eAssembly is straightforward: insert seal plugs where needed, crimp the solid contacts onto stripped wire, then seat each contact into the DTM housing until the wedgelock snaps in. For best results, use an appropriate size precision crimp tool and verify retention before sealing the harness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStrip 20–22 AWG conductors to recommended length\u003c\/li\u003e\n  \u003cli\u003eUse a matched crimp tool for solid size-20 terminals\u003c\/li\u003e\n  \u003cli\u003eConfirm contact retention and orientation before wedgelock installation\u003c\/li\u003e\n  \u003cli\u003eApply dielectric grease if additional moisture protection is desired\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere are these connectors typically used and what environments suit them?\u003c\/h3\u003e\n\u003cp\u003eThese three-pin DTM connectors are popular around engines and in exposed vehicle regions because of their compact, sealed design. They work well on motorcycles, cars, boats, ATVs, and utility vehicles where resistance to oil, water, and vibration is important.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUnder-hood wiring for sensors, pumps, and lighting\u003c\/li\u003e\n  \u003cli\u003eMarine and jetski wiring exposed to spray and salt air\u003c\/li\u003e\n  \u003cli\u003eMotorcycle and off-road vehicle harness repairs or upgrades\u003c\/li\u003e\n  \u003cli\u003eTrailer, caravan, and auxiliary equipment connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: technicians, DIY vehicle owners, and small-scale harness builders who need a reliable, ready-to-use supply of Deutsch DTM 3-pin connectors and solid size-20 contacts. The kit is tailored to anyone wiring low-to-moderate current circuits in automotive, marine, powersports, or industrial applications where a compact, sealed connector is preferred. Because the kit includes wedgelocks and seal plugs, it’s especially useful for those assembling and maintaining connectors in wet or vibration-prone conditions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these contacts compatible with stranded wire?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the size-20 solid contacts accept 20–22 AWG stranded or solid wire when crimped correctly with a matching tool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the kit in saltwater environments?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the PA66 housings and copper-nickel contacts resist corrosion, but add dielectric grease for best long-term saltwater protection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55167064211799,"sku":"B0B1ZJD4XW","price":38.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-dtm-3-pin-kit-front-packaging.jpg?v=1790376209"},{"product_id":"jrready-deutsch-pin-removal-tool-kit-size-12-14-16-20-extractors-stainless-steel-shafts-anodized-handles","title":"JRready Deutsch Pin Removal Tool Kit — Size 12\/14\/16\/20 Extractors, Stainless Steel Shafts \u0026 Anodized Handles","description":"\u003cp\u003e\u003cstrong\u003eThe JRready ST5291 Deutsch Pin Removal Tool Kit is a four-piece set of stainless-steel pin extractors designed to remove and reinstall size 12, 14, 16 and 20 Deutsch connector contacts safely and precisely.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact toolkit is built for technicians, mechanics and electricians who work with Deutsch series connectors (DT, DTM, DTP, DTHD and HD). Each tool pairs a long slotted stainless-steel shaft with an anodized aluminum handle so you can reach recessed terminals, depress retention tangs without marring housings, and pull wires out cleanly. The set covers the most common solid-contact gauges used in automotive, off-road, industrial and marine wiring, and includes guidance on maximum wire outer diameters for each size.\u003c\/p\u003e\n\n\u003ch3\u003eHow does each tool fit different Deutsch contact sizes?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains four dedicated extractors sized to match common Deutsch solid contacts. Each adapter matches a contact family and wire gauge range so insertion depth and tip width align with the terminal’s retention feature. Using the correct size reduces risk of bending clips or nicking insulation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDRK-12DTP-PRO — for size 12 contacts, suitable for 12–14 AWG, max outer diameter ~4.0 mm.\u003c\/li\u003e\n\u003cli\u003eDRK-14DT-PRO — for size 14 contacts, suitable for 14–16 AWG, max outer diameter ~3.5 mm.\u003c\/li\u003e\n\u003cli\u003eDRK-16DT-PRO — for size 16 contacts, suitable for 16–20 AWG, max outer diameter ~3.2 mm.\u003c\/li\u003e\n\u003cli\u003eDRK-20DTM-PRO — for size 20 contacts, suitable for 20–22 AWG, max outer diameter ~2.4 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat construction features make these tools durable and comfortable?\u003c\/h3\u003e\n\u003cp\u003eMaterials and ergonomics are chosen to withstand repeated use while keeping the operator in control. Every shaft is stainless steel to resist bending and corrosion, and the anodized aluminum handles increase grip comfort and long-term wear resistance. The slotted shaft design extends the reach and engages terminals at different depths without forcing parts out of alignment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll stainless-steel shafts for rigidity and corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eLonger slotted length to access deeply seated terminals safely.\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum handles for a secure, comfortable hold.\u003c\/li\u003e\n\u003cli\u003ePrecision tips shaped to depress retention tangs without damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the kit safely to avoid damaging contacts?\u003c\/h3\u003e\n\u003cp\u003eCorrect technique matters more than force. Insert the correct-size tool into the connector until you feel the retention tang release, then gently extract the wire. For smaller size 20 contacts, work slowly and avoid excessive twisting or prying that could deform the tip.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelect the tool matching the contact size and wire gauge.\u003c\/li\u003e\n\u003cli\u003eInsert until tang releases, then pull straight out—no brute force.\u003c\/li\u003e\n\u003cli\u003eFor slim tips (size 20) apply delicate pressure to prevent bending the tool.\u003c\/li\u003e\n\u003cli\u003eInspect connectors and wires after removal before reassembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The JRready ST5291 kit is intended for professional installers, fleet technicians, electrical hobbyists and maintenance staff who regularly service Deutsch-series connectors. If you handle automotive harness repairs, off-road electronics, industrial control wiring or marine connectors and need a small, portable set that covers multiple common contact sizes, this kit gives you durable extraction tools plus practical guidance for safe use. JRready also offers after-sales support—contact them with photos if you encounter fit or function issues for help and resolution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit work on DT and DTM Deutsch connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The set covers DT, DTM, DTP, DTHD and HD series connectors across sizes 12–20.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the size 20 tool on thicker wires?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Size 20 is for 20–22 AWG (max ~2.4 mm). Avoid force or you may bend the slim tip.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55167210029399,"sku":"B0CR6F2HR1","price":46.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-front-packaging.jpg?v=1790378539"},{"product_id":"jrready-deutsch-connector-pin-removal-kit-st5231-size-20-16-12-extractors-stainless-handles","title":"JRready Deutsch Connector Pin Removal Kit ST5231 — Size 20\/16\/12 Extractors, Stainless Handles","description":"\u003cp\u003e\u003cstrong\u003eJRready ST5231 is a four-piece Deutsch connector release and pin removal kit designed to extract size 20, 16, and 12 solid contacts cleanly and to release terminals from a wide range of Deutsch-style housings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact toolkit groups three slotted pin-extractors and one dual-ended pick into a single set tailored for professional electricians, automotive technicians, and hobbyists who service Deutsch DT\/DTP\/DTM and related connectors. Each extractor features a stainless steel shaft for strength and a longer anodized aluminum handle for secure grip and added leverage. The kit is built to access terminals at different depths, minimize wire damage, and speed up wiring repair, replacement, or assembly tasks.\u003c\/p\u003e\n\n\u003ch3\u003eHow do the different tools in this kit fit various contact sizes?\u003c\/h3\u003e\n\n\u003cp\u003eEach stainless-steel extractor is sized for a specific contact gauge so you can remove pins without deforming the contact or insulation. The DRK-20DTM, DRK-16DT, and DRK-12DTP match common Deutsch solid-contact dimensions and accept maximum wire outer diameters as specified.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDRK-20DTM — for size 20 contacts, supports wires up to 2.1 mm outer diameter.\u003c\/li\u003e\n  \u003cli\u003eDRK-16DT — for size 16 contacts, supports wires up to 2.9 mm outer diameter.\u003c\/li\u003e\n  \u003cli\u003eDRK-12DTP — for size 12 contacts, supports wires up to 3.7 mm outer diameter.\u003c\/li\u003e\n  \u003cli\u003eLonger slotted length lets you reach terminals installed at variable depths.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connector series and applications are supported?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit works across a broad range of Deutsch and Deutsch-compatible housings used in automotive, industrial, and off-road equipment. It’s suitable for repair, retrofit, and prototyping work where access to individual contacts is required.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with Deutsch DT, DTP, DTM series and many similar housings.\u003c\/li\u003e\n  \u003cli\u003eAlso fits AEC, DTV, DRB, HD10\/20\/30, STRIKE and JIFFY SPLICE type connectors.\u003c\/li\u003e\n  \u003cli\u003eUseful for wiring harness repair, vehicle diagnostics, and field maintenance.\u003c\/li\u003e\n  \u003cli\u003eRemoves terminals without cutting or otherwise damaging the wire harness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is each tool constructed and how does that affect longevity?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit combines corrosion-resistant stainless steel shafts with anodized aluminum handles for a balance of durability and comfortable control. The build prevents bending and wear during repeated insertions into sealed and unsealed housings.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStainless steel shafts resist rust and maintain slot shape under torque.\u003c\/li\u003e\n  \u003cli\u003eAnodized aluminum handles add ergonomic grip and prevent slippage.\u003c\/li\u003e\n  \u003cli\u003eExtended slotted length reduces force needed and avoids pulling on insulation.\u003c\/li\u003e\n  \u003cli\u003eDRK-RT1B pick adds a hooked and flat-head option for stubborn terminals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are practical tips for safe, efficient use?\u003c\/h3\u003e\n\n\u003cp\u003eUsing the right-size extractor and the correct insertion angle prevents terminal deformation and wiring damage. Work methodically: identify the contact size, depress the retention tang gently, and withdraw the terminal straight out.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSelect the extractor matching the contact size before inserting.\u003c\/li\u003e\n  \u003cli\u003eInsert the slotted end fully until the retention tang clears, then pull straight out.\u003c\/li\u003e\n  \u003cli\u003eUse the DRK-RT1B hook to nudge bent tangs or the screwdriver end for minor lever adjustments.\u003c\/li\u003e\n  \u003cli\u003eKeep tools clean and store dry to sustain long service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The JRready ST5231 kit suits electricians, fleet and heavy-equipment mechanics, motorsport technicians, and electronics hobbyists who frequently service Deutsch-style connectors. It’s particularly useful for workshops that need a compact, durable set to remove solid contacts without replacing entire housings or damaging wire insulation. If you work with automotive harnesses, off-road vehicles, industrial control panels, or custom wiring projects, this kit streamlines terminal removal and reduces rework time.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these extractors work with sealed Deutsch DT connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the stainless-steel slots reach into most sealed DT\/DTP\/DTM housings to depress retention tangs and release solid contacts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the DRK-RT1B pick to realign bent tangs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the small hook and screwdriver ends on the DRK-RT1B are suitable for nudging or aligning retention tangs carefully.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55167330484567,"sku":"B0B6VF33N2","price":45.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-front-view-kit.jpg?v=1790383734"},{"product_id":"jrready-2-pin-deutsch-connector-kit-14awg-6-sets-black-ip67-waterproof-with-heat-shrink-butt-connectors","title":"JRready 2-Pin Deutsch Connector Kit 14AWG, 6 Sets Black — IP67 Waterproof with Heat-Shrink Butt Connectors","description":"\u003cp\u003e\u003cstrong\u003eJRready 2 Pin Deutsch Connector Kit is a complete 14AWG DT pigtail set with IP67 waterproof housings and 24 heat-shrink butt connectors for secure automotive and marine wiring.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit supplies everything needed to create durable, weatherproof two-pin connections: male and female DT housings, matching terminals, pre-attached 14AWG tinned copper pigtails, and 24 heat-shrink butt connectors. Built for heavy-duty electrical loads and harsh environments, the components are engineered to fit tightly, resist corrosion, and stay sealed under vibration and moisture exposure. The package includes six male and six female DT assemblies plus crimpable heat-shrink butt joints for quick, professional repairs or custom harnesses.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit keep connections waterproof and corrosion-resistant?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses DT-series housings rated IP67 and 14AWG tinned copper wires that mate tightly with the sealing plug. JRready adds a tail cover and ultrasonic welding to lock the seal and terminal in place, minimizing gaps where water or contaminants could enter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP67-rated DT housings for dust and waterproof protection\u003c\/li\u003e\n  \u003cli\u003eTinned copper wire resists corrosion in marine and road environments\u003c\/li\u003e\n  \u003cli\u003eUltrasonic-welded tail cover prevents cover separation and seal failure\u003c\/li\u003e\n  \u003cli\u003eSealing plug verified for a snug fit with 14AWG conductors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical ratings and wire specs should I expect?\u003c\/h3\u003e\n\u003cp\u003eEach 2-pin assembly is built around 14AWG (0.254mm x 41 strands) tinned copper for solid current carrying capacity and flexibility. The connectors are designed for continuous temperature ranges from -40°F to 221°F (-40°C to 105°C) and a maximum rated current of 13A per circuit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e14AWG tinned copper wire for reliable conductivity and flexibility\u003c\/li\u003e\n  \u003cli\u003eMaximum continuous temperature: -40°F to 221°F (-40°C to 105°C)\u003c\/li\u003e\n  \u003cli\u003eMaximum rated current: 13 amps per pin\u003c\/li\u003e\n  \u003cli\u003eUL1015 wire standard ensuring insulating integrity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the included heat-shrink butt connectors improve durability?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains 24 heat-shrink butt connectors (BHT2.0) with 0.8mm wall thickness and tinned copper barrels to secure crimps and prevent shorts. Heat-shrink tubing seals the joint, keeping moisture out and strengthening the mechanical bond at the crimp point.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24 heat-shrink butt terminals, suitable for 16–14AWG wiring\u003c\/li\u003e\n  \u003cli\u003eThick tinned-copper barrel for lower voltage drop and strong crimps\u003c\/li\u003e\n  \u003cli\u003eHeat-shrink outer layer provides watertight insulation\u003c\/li\u003e\n  \u003cli\u003eWide temperature range: -40°F to 221°F for consistent performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what applications are common?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard Deutsch DT wiring practices: crimp the terminal to the wire, insert the terminal into the housing, and engage the sealing plug. This kit is tailored for users who need rugged, serviceable connectors for lights, sensors, and harness splices where environmental protection is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-cut pigtails speed up repairs and custom harness builds\u003c\/li\u003e\n  \u003cli\u003eCommonly used for LED light bars, RV lighting, boat wiring, and motorsport harnesses\u003c\/li\u003e\n  \u003cli\u003eTail cover and ultrasonic weld improve long-term reliability under vibration\u003c\/li\u003e\n  \u003cli\u003eSuitable for both field repairs and permanent installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The JRready 2 Pin Deutsch Connector Kit is aimed at mechanics, boatowners, off-road enthusiasts, electricians, and DIYers who require dependable, weatherproof two-pin connections. If you need heavy-duty 14AWG pigtails with factory-style seals for outdoor, automotive, or marine electrical systems, this kit supplies the housings, terminals, and heat-shrink butt connectors to build or repair harnesses with professional-level durability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these Deutsch connectors fully waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The DT housings are rated IP67 and include sealed plugs and heat-shrink joints for waterproof protection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wire gauges do the butt connectors accept?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The included heat-shrink butt connectors are sized for 16–14AWG wires and use tinned copper barrels for secure crimps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55167482462551,"sku":"B09MM9VGNZ","price":41.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-dt-2pin-front-assembly.jpg?v=1790387302"},{"product_id":"jrready-2-pin-deutsch-dt-connector-kit-10-sets-gray-ip68-waterproof-14-18-awg-contacts","title":"JRready 2 Pin Deutsch DT Connector Kit — 10 Sets Grey, IP68 Waterproof, 14–18 AWG Contacts","description":"\u003cp\u003e\u003cstrong\u003eJRready 2 Pin Deutsch DT Connector Kit supplies 10 complete waterproof 2-pin Deutsch DT assemblies plus pin removal tools and mounting clips for reliable automotive and marine wiring repairs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one kit contains DT04-2P plug bodies, DT06-2S socket bodies, size 16 stamped contacts rated for 14–18 AWG wire, sealing plugs, Deutsch-style pin removal tools and mounting clips. Housings are molded from PA66 with integrated seals to meet IP68 durability expectations; the kit is built to simplify installation, rework and secure panel mounting on vehicles, boats and outdoor equipment.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit make wiring repairs faster and less error-prone?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit bundles every part you need to rebuild or replace a 2-pin Deutsch DT connection so you avoid scavenging mismatched pieces. Included removal tools let you unlock and extract pins without damaging the housing, which saves time when correcting wiring mistakes.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e10 matched plug-and-socket sets for simultaneous multi-connector projects\u003c\/li\u003e\n  \u003cli\u003ePin removal tools to extract both male and female contacts safely\u003c\/li\u003e\n  \u003cli\u003eSeal plugs to preserve IP68 protection when pins are unused\u003c\/li\u003e\n  \u003cli\u003eStamped size 16 contacts sized for 14–18 AWG wire, ready-crimp compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these Deutsch connectors stand up to outdoor and under-hood environments?\u003c\/h3\u003e\n\n\u003cp\u003eThe housings are produced from PA66 engineering plastic and include integrated seals rated for IP68 water ingress protection, designed to resist rain, splashing and temporary submersion. Temperature tolerance from -40°C to +125°C covers typical automotive, marine and off-road exposure ranges.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIP68-rated seals to guard against dust and water\u003c\/li\u003e\n  \u003cli\u003ePA66 construction resists oils, fuels and UV exposure\u003c\/li\u003e\n  \u003cli\u003eTemperature range suitable for engine bays and exterior mounts\u003c\/li\u003e\n  \u003cli\u003eDurable stamped metal contacts for reliable electrical continuity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the mounting clips and removal tools improve installation and serviceability?\u003c\/h3\u003e\n\n\u003cp\u003eMounting clips secure connector bodies to panels or brackets, preventing chafing and accidental disconnection from vibration or movement. The included removal tools let technicians release wedge locks and free pins, enabling terminal repositioning or replacement without replacing the entire connector housing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eClips hold connectors neatly against mounting surfaces to reduce strain\u003c\/li\u003e\n  \u003cli\u003eRemoval tools let you rework individual terminals without damage\u003c\/li\u003e\n  \u003cli\u003eReduced downtime from quicker troubleshooting and terminal swaps\u003c\/li\u003e\n  \u003cli\u003eCleaner harness routing and fewer temporary fixes during repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat wire sizes and applications are these contacts suitable for?\u003c\/h3\u003e\n\n\u003cp\u003eContacts are stamped size 16 items designed specifically for 14–18 AWG wire commonly used in automotive, marine and light industrial wiring. The kit is appropriate for harness repair, custom pigtails and replacing weatherproof connectors on cars, trucks, motorcycles, ATVs and boats.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSize 16 stamped contacts for reliable crimp-to-wire connection\u003c\/li\u003e\n  \u003cli\u003eOptimized for 14–18 AWG service wiring found on vehicle systems\u003c\/li\u003e\n  \u003cli\u003eFits DT04-2P\/DT06-2S housings for standard Deutsch DT compatibility\u003c\/li\u003e\n  \u003cli\u003eUseful for sensors, lights, power leads and accessory circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This JRready kit is aimed at technicians, DIY mechanics, marine electricians and off-road enthusiasts who need a compact, complete solution for repairing or building 2-pin Deutsch DT connections. If you want matched plug-and-socket sets with proper seals, the right-size contacts, removal tools for safe terminal rework and mounting clips for tidy installations, this kit supplies the parts to finish jobs faster and with fewer do-overs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these Deutsch connectors truly waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The housings use PA66 and integrated seals rated to IP68 for protection against dust and temporary submersion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wire sizes do the contacts accept?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Contacts are stamped size 16 and designed for 14–18 AWG wires typically used in automotive and marine applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55167491866967,"sku":"B0BKRRGRQY","price":41.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-front-connector-pair.jpg?v=1790387575"},{"product_id":"jrready-deutsch-dtm-4-pin-connector-kit-st6330-4-4-sets-with-size-20-solid-contacts-wedgelocks-seal-plugs","title":"JRready Deutsch DTM 4‑Pin Connector Kit ST6330‑4 — 4 Sets with Size 20 Solid Contacts, Wedgelocks \u0026 Seal Plugs","description":"\u003cp\u003e\u003cstrong\u003eJRready ST6330-4 is a complete 4-set Deutsch DTM 4-pin connector kit with size 20 solid contacts, wedgelocks and seal plugs for reliable waterproof electrical connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit supplies everything needed to create dependable sealed 4-pin Deutsch DTM connections for vehicles and equipment. The housings are molded from PA66 nylon for strength and environmental resistance, while the included copper‑nickel alloy solid contacts handle 20–22 AWG wires and continuous currents up to 7.5 A. JRready bundled wedgelocks and seal plugs so you can assemble secure, serviceable plugs and sockets for engine compartments, marine gear, and outdoor electrical systems.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit protect electrical connections near engines and outdoors?\u003c\/h3\u003e\n\n\u003cp\u003eThe JRready DTM housings are engineered from high‑strength PA66 nylon that resists heat, abrasion, and moisture. The design accepts sealing plugs and features wedgelocks to lock contacts in place, reducing the chance of corrosion or intermittent connections in harsh environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePA66 nylon housings for heat and wear resistance\u003c\/li\u003e\n  \u003cli\u003eSeal plugs included to block water ingress\u003c\/li\u003e\n  \u003cli\u003eWedgelocks secure contacts against vibration\u003c\/li\u003e\n  \u003cli\u003eSize 20 solid contacts resist deformation under crimp\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat wires and electrical loads can these size 20 solid contacts handle?\u003c\/h3\u003e\n\n\u003cp\u003eThe supplied size 20 solid contacts are suited for 20–22 AWG wiring and rated for continuous currents up to 7.5 amps, which covers many sensor, lighting, and low‑power accessory circuits. Contacts are made from a copper‑nickel alloy and are surface‑treated to improve crimp reliability and reduce cracking during assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWire range: 20–22 AWG\u003c\/li\u003e\n  \u003cli\u003eContinuous current rating: 7.5 A per contact\u003c\/li\u003e\n  \u003cli\u003eCopper‑nickel alloy for stable conductivity\u003c\/li\u003e\n  \u003cli\u003eSurface treatment for improved crimp durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and how many connections can I build?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit contains four full pairs of DTM 4‑pin housings (plugs and receptacles), 16 pairs of solid contacts to populate all positions, plus wedgelocks and seal plugs to finish each connector. That means you can build up to four completed, sealed 4‑pin Deutsch DTM cable assemblies right away.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4 pairs DTM 4‑pin housings (DTM06‑4S \/ DTM04‑4P)\u003c\/li\u003e\n  \u003cli\u003e16 pairs size 20 solid contacts (0460\/0462 part series)\u003c\/li\u003e\n  \u003cli\u003e4 plug wedgelocks and 4 receptacle wedgelocks\u003c\/li\u003e\n  \u003cli\u003e4 seal plugs for unused cavities\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is assembly and what tools are recommended?\u003c\/h3\u003e\n\n\u003cp\u003eAssembly is straightforward with proper tools: strip the wire, insert into the contact, and crimp using a matched size crimp tool for size 20 terminals. After inserting each contact into the housing, install wedgelocks and seal plugs; a small pick or insertion\/extraction tool helps with seating and future service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse a size‑20 crimp tool for reliable crimps\u003c\/li\u003e\n  \u003cli\u003eWire stripper for 20–22 AWG insulation removal\u003c\/li\u003e\n  \u003cli\u003eSmall pick or terminal insertion tool recommended\u003c\/li\u003e\n  \u003cli\u003eInspect crimps visually and with pull test before sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: JRready ST6330‑4 suits technicians, fabricators, and hobbyists who need robust 4‑pin sealed connections for motorcycles, cars, trucks, boats, ATVs, and specialty equipment. If you assemble or repair wiring near engines, under hoods, or in marine environments and require ready‑to‑build Deutsch DTM connectors with durable solid contacts and necessary locking hardware, this kit gives you a complete, serviceable solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these contacts handle automotive sensor circuits?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The size 20 contacts support 20–22 AWG wires and up to 7.5 A continuous, suitable for many sensor and low-power circuits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are seal plugs included for unused cavities?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes four seal plugs to block water ingress in unused connector positions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55167576211799,"sku":"B0C1MXYZVY","price":40.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-dtm-4-pin-front-packaging.jpg?v=1790388920"},{"product_id":"jrready-mini-fit-jr-molex-pin-extractor-dap-d173-atx-eps-pcie-depinning-tool-with-built-in-plunger-hardened-tip","title":"JRready Mini-Fit Jr Molex Pin Extractor DAP-D173 — ATX\/EPS\/PCIe Depinning Tool with Built-In Plunger, Hardened Tip","description":"\u003cp\u003e\u003cstrong\u003eThe JRready DAP-D173 is a compact Molex Mini-Fit Jr pin extractor with an integrated plunger that releases and removes Mini-Fit Jr terminals quickly and safely.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eMade for technicians and hobbyists who service ATX, EPS and PCI-E connectors, this Molex 11-03-0044-equivalent depinning tool combines a hardened alloy extraction tip with an anodized aluminum handle and a built-in ejector rod. It’s designed to clear locking tabs reliably, reduce terminal wear during removal and improve speed when depinning connectors with or without attached wires.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the built-in plunger improve terminal removal?\u003c\/h3\u003e\n\u003cp\u003eThe integrated plunger (ejector rod) depresses locking tangs and pushes contacts out after the extraction tip releases them. This eliminates manual prying that can bend or damage pins and cuts the number of steps needed to depin a terminal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-handed depress-and-push action for faster extraction.\u003c\/li\u003e\n  \u003cli\u003eReduces stress on contacts compared with separate back-pushers.\u003c\/li\u003e\n  \u003cli\u003eMakes removal of terminals without wires easier and safer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this tool compatible with Molex Mini-Fit Jr and ATX connectors?\u003c\/h3\u003e\n\u003cp\u003eYes — the DAP-D173 is dimensioned to work with Molex Mini-Fit Jr family contacts (including 5556 and 5558 series) and common ATX\/EPS\/PCI-E housings. It matches the functional profile of Molex part 11-03-0044, so it fits and operates where Mini-Fit Jr terminals are used.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Mini-Fit Jr terminals used in PC power connectors.\u003c\/li\u003e\n  \u003cli\u003eWorks with both male and female contacts in standard housings.\u003c\/li\u003e\n  \u003cli\u003eSuitable for ATX, EPS and PCI-E connector servicing and repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the tip and handle suited for repeated professional use?\u003c\/h3\u003e\n\u003cp\u003eThe extraction tip is made from hardened alloy steel for durable, precise contact release with minimal wear. The handle is upgraded aluminum alloy with an ergonomic shape to improve grip, control and comfort during extended repair tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHardened tip resists deformation over many cycles.\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy handle reduces tool weight while improving durability.\u003c\/li\u003e\n  \u003cli\u003eErgonomic profile helps steady fine movements in crowded connector bays.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use and care for the JRready pin removal tool?\u003c\/h3\u003e\n\u003cp\u003eInsert the extraction tip into the connector cavity to disengage the terminal latch, then push the built-in plunger to eject the contact. Keep the tip clean, avoid bending it, and store the tool dry to maintain tip hardness and handle finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWork in good light and steady the housing to prevent slippage.\u003c\/li\u003e\n  \u003cli\u003eWipe metal tip with a cloth after use; avoid corrosive cleaners.\u003c\/li\u003e\n  \u003cli\u003eStore in a toolbox or pouch to protect the tip and plunger mechanism.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The JRready DAP-D173 is aimed at electronics technicians, PC builders, automotive electricians and DIYers who frequently remove or replace Mini-Fit Jr terminals. It’s especially useful when terminals lack attached wires or when quick, repeatable depinning is required during connector repair, harness rework or component swap-outs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this tool work on Molex 5556 and 5558 contacts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The DAP-D173 is sized for Molex Mini-Fit Jr contacts, including 5556 and 5558 series.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the built-in plunger for terminals without wires?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The integrated ejector rod is designed to push out terminals even when no wire is attached.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55167638569303,"sku":"B0C3HB1WNK","price":40.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-front-view-dap-d173-packaging.jpg?v=1790390135"},{"product_id":"jrready-deutsch-dtm-2-pin-connector-kit-8-set-with-solid-size-20-contacts-wedgelocks-seals","title":"JRready Deutsch DTM 2-Pin Connector Kit — 8-Set with Solid Size-20 Contacts, Wedgelocks \u0026 Seals","description":"\u003cp\u003e\u003cstrong\u003eJRready ST6330-201 is an 8-set Deutsch DTM 2-pin connector kit with solid size-20 contacts, wedgelocks, and seals designed for reliable, waterproof electrical connections in vehicles and marine equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis JRready kit supplies everything needed to assemble eight complete 2-pin Deutsch DTM plug-and-receptacle pairs for aftermarket wiring, repairs, or custom harness builds. The package pairs robust PA66 nylon housings with copper-nickel alloy solid contacts rated for typical 20–22 AWG wiring. Each connector set includes wedgelocks and seal plugs so you can finish durable, weather-resistant terminations right away.\u003c\/p\u003e\n\n\u003ch3\u003eHow durable are the housings and terminals for long-term use?\u003c\/h3\u003e\n\n\u003cp\u003eThe connector bodies are molded from PA66 nylon, chosen for mechanical strength, heat resistance and electrical insulation. Terminals are solid size-20 contacts made from a copper-nickel alloy and are specially surface-treated to improve crimp integrity, reducing the chance of cracking during assembly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePA66 nylon housings resist wear, corrosion and heat exposure.\u003c\/li\u003e\n  \u003cli\u003eSolid size-20 contacts accept 20–22 AWG wire with 7.5 A continuous capacity.\u003c\/li\u003e\n  \u003cli\u003eSurface-treated contacts improve crimp reliability and conductivity.\u003c\/li\u003e\n  \u003cli\u003eIncluded wedgelocks and seal plugs maintain mechanical retention and environmental sealing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is included in the JRready ST6330-201 kit?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit arrives ready to assemble with every component needed for eight complete 2-pin DTM connections. That eliminates the need to source individual terminals, seals or retention devices for small harness projects or spares.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e8 DTM 2-pin plug\/receptacle pairs (DTM06-2S \/ DTM04-2P).\u003c\/li\u003e\n  \u003cli\u003e16 solid size-20 contacts (0460-202-20141 \/ 0462-201-20141).\u003c\/li\u003e\n  \u003cli\u003e8 wedgelocks for plugs and 8 wedgelocks for receptacles.\u003c\/li\u003e\n  \u003cli\u003e8 seal plugs for unused cavities or added protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere are these connectors best used and how water-resistant are they?\u003c\/h3\u003e\n\n\u003cp\u003eDeutsch DTM series connectors are engineered for demanding environments around engines, transmissions and exposed vehicle areas. With proper assembly—contacts crimped correctly and seals seated—the connectors provide effective protection against moisture and contaminants in automotive, marine and powersports applications.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCommonly used under the hood, on motorcycles, ATVs, and marine craft.\u003c\/li\u003e\n  \u003cli\u003eSeals and wedgelocks help maintain waterproofing when assembled properly.\u003c\/li\u003e\n  \u003cli\u003eSuitable for wiring exposed to vibration, grease and temperature cycles.\u003c\/li\u003e\n  \u003cli\u003eNot intended as an immersion-rated submarine connector; designed for splash and spray protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I crimp and assemble the solid size-20 contacts?\u003c\/h3\u003e\n\n\u003cp\u003eUse a compatible size-20 crimp die and quality crimp tool to achieve a gas-tight connection and avoid damage. The contacts accept 20–22 AWG wire—strip to the recommended length, position the conductor and insulation in the correct crimp pockets, and apply a single, full crimp stroke.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUse a Deutsch-compatible size-20 crimp tool or approved ratchet crimper.\u003c\/li\u003e\n  \u003cli\u003eConfirm wire gauge (20–22 AWG) and keep insulation intact where specified.\u003c\/li\u003e\n  \u003cli\u003eSeat the contact fully into the housing and lock the wedgelock in place.\u003c\/li\u003e\n  \u003cli\u003eTest continuity and mechanical retention before final installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: JRready ST6330-201 is ideal for technicians, DIY auto and marine enthusiasts, and wiring professionals who need a compact stock of reliable 2-pin Deutsch DTM connectors for repair, retrofits or new harnesses. If you build or maintain wiring that sees heat, vibration and wet conditions and you prefer robust, serviceable connectors, this kit provides the terminals, seals and retention parts to complete consistent, durable assemblies.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these contacts handle 12V automotive circuits?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The size-20 solid contacts accept 20–22 AWG wire and are rated for about 7.5 A continuous, suitable for typical 12V accessory circuits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the housings heat- and corrosion-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The PA66 nylon housings resist heat, wear and corrosion, making them suitable for engine-bay and outdoor wiring.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55167678742871,"sku":"B0C244N2WY","price":45.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-dtm-2pin-front-view.jpg?v=1790390914"},{"product_id":"jrready-deutsch-dt-3-pin-connector-kit-5-sets-with-solid-tin-bronze-contacts-seals-tools","title":"JRready Deutsch DT 3-Pin Connector Kit — 5 Sets with Solid Tin-Bronze Contacts, Seals \u0026 Tools","description":"\u003cp\u003e\u003cstrong\u003eJRready ST6328-3 is a complete Deutsch DT 3-pin connector kit that supplies five assembled connector sets with solid tin-bronze contacts, seals, wedgelocks and installation tools for robust, waterproof vehicle and equipment wiring.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit is built for technicians and hobbyists who need reliable, weatherproof connections in demanding electrical environments. It combines PA66 nylon housings with UL94-V0 flame-rated material, pre-measured solid contacts rated to 13A maximum, and every accessory required to assemble or repair up to five Deutsch DT 3-pin plugs and sockets. The components are compatible with standard Deutsch DT tooling and suit a wide range of wire gauges and applications.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly is included in this 5-set Deutsch DT 3-pin kit?\u003c\/h3\u003e\n\n\u003cp\u003eThe package provides enough parts to assemble five male and five female Deutsch DT 3-pin connector pairs, plus extra components for secure sealing and fastening. Everything is intended to allow immediate assembly and use without sourcing additional small parts.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e5 x DT04-3P male housings and 5 x DT06-3S female housings\u003c\/li\u003e\n  \u003cli\u003e18 pairs of solid male and female contacts (0460-215-16141 \/ 0462-209-16141)\u003c\/li\u003e\n  \u003cli\u003e5 orange W3S wedgelocks and 5 green W3P wedgelocks for contact retention\u003c\/li\u003e\n  \u003cli\u003e5 seal plugs, 2 mounting clips, and 1 connector removal tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the solid contacts and materials perform in harsh environments?\u003c\/h3\u003e\n\n\u003cp\u003eThe contacts are tin‑bronze with a nickel-plated finish to resist corrosion, and each contact is rated for up to 13A for secure current handling. The housings are molded from PA66 nylon with a UL94-V0 flame rating, providing mechanical strength and improved flame resistance for equipment installations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSolid terminals suitable for wire sizes 14–20 AWG\u003c\/li\u003e\n  \u003cli\u003eTin bronze with nickel plate for conductivity and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003ePA66 nylon connectors offering water resistance and durability\u003c\/li\u003e\n  \u003cli\u003eMaterial may emit a mild odor from flame retardant additives — normal and non-hazardous\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I crimp or solder these contacts, and what tools are recommended?\u003c\/h3\u003e\n\n\u003cp\u003eJRready solid terminals are designed for both crimping and soldering, giving flexibility depending on shop practice or field repair needs. For consistent crimp quality, JRready recommends using the ACT-DT1 crimping tool, which supports turned pin\/socket sizes 12#, 16#, and 20#.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSupports crimp and solder processes for reliable joints\u003c\/li\u003e\n  \u003cli\u003eCompatible with JRready ACT-DT1 crimper for sizes 12#, 16#, 20#\u003c\/li\u003e\n  \u003cli\u003eWire gauge range 14–20 AWG for broad compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere are these Deutsch DT connectors typically used?\u003c\/h3\u003e\n\n\u003cp\u003eThese DT 3-pin connectors are common across transportation and industrial sectors where moisture, vibration and exposure demand sealed, durable connections. They’re suitable for engine bays, control modules, solenoids and any location that needs a small, rugged three-circuit connector.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTrucks, buses and off-highway vehicles\u003c\/li\u003e\n  \u003cli\u003eConstruction, agriculture and mining equipment\u003c\/li\u003e\n  \u003cli\u003eMarine, motorcycle and emergency vehicle wiring\u003c\/li\u003e\n  \u003cli\u003eEngine controls, transmission sensors and cab electronics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This JRready ST6328-3 kit is aimed at vehicle electricians, fleet maintenance teams, OEM installers and DIY mechanics who require a compact, water-resistant 3-pin connector solution with solid contacts and the accessories to complete multiple assemblies. If you need durable, field-serviceable Deutsch DT connectors and prefer parts that accept both crimp and solder terminations, this kit provides the core components to repair or build up to five 3-pin DT connections quickly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the contacts corrosion resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Contacts are tin-bronze with nickel plating to reduce corrosion and maintain conductivity.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which wire sizes work with these terminals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They accept 14–20 AWG wires and are suitable for both crimping and soldering connections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55168284655959,"sku":"B09ZYCB5S3","price":40.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-dt-3pin-front-view.jpg?v=1790398191"},{"product_id":"jrready-deutsch-pin-removal-tool-set-8-piece-depinning-kit-with-insulated-handles-stainless-steel-extractors","title":"JRready Deutsch pin removal tool set — 8‑piece depinning kit with insulated handles \u0026 stainless steel extractors","description":"\u003cp\u003e\u003cstrong\u003eJRready ACTCRH7A06 is an 8-piece Deutsch depinning kit combining four insulated stainless-steel extractors and four plastic removal tools for safe, precise terminal extraction from DT\/DTM\/DTP\/DTHD connector families.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you’re troubleshooting automotive, heavy-equipment, or truck wiring, having the right depinning tools prevents connector damage and speeds repair. This JRready set was designed to match common Deutsch series terminals and offers a mix of rigid, slotted metal extractors with protective PA66-style handles plus softer plastic tools for delicate removal. Together they help technicians and DIYers remove pins and sockets cleanly across a wide range of insertion depths and terminal sizes.\u003c\/p\u003e\n\n\u003ch3\u003eHow do the insulated handle extractors improve safety and control?\u003c\/h3\u003e\n\u003cp\u003eThe four metal extractors include PA66-style insulated handles that increase grip and reduce direct metal contact during use. The handles help steady the tool while you engage the terminal release, which reduces slips and accidental wire damage. These extractors also feature extended slotted tips to reach terminals set deep within the connector body.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePA66-style insulated grip for better handling\u003c\/li\u003e\n  \u003cli\u003eStainless-steel shafts for stiffness and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eExtended slotted tips for varied insertion depths\u003c\/li\u003e\n  \u003cli\u003eDesigned for frequent workshop use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I use the plastic terminal removal tools instead of metal extractors?\u003c\/h3\u003e\n\u003cp\u003eThe four plastic tools are intended for applications that need a gentler touch—removing seals or fragile pins without scraping connector housings. Use plastic tools when working with soft materials, factory-installed seals, or when you want to minimize the risk of nicking plastic retention surfaces. They’re ideal for final adjustments and delicate extractions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSoft plastic avoids scratching connector bodies\u003c\/li\u003e\n  \u003cli\u003eReduces risk of seal or wire insulation damage\u003c\/li\u003e\n  \u003cli\u003eUseful for delicate or close-tolerance terminals\u003c\/li\u003e\n  \u003cli\u003eComplements metal extractors for full-range work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Deutsch connectors and terminal sizes does this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit covers many common Deutsch series including DT, DTM, DTP, HD10, HD30 and HDP20, making it suitable for automotive, truck, and equipment connectors. The varied tip profiles and slot lengths let you access multiple terminal positions and sizes without needing separate specialty tools. If your connector is a widely used Deutsch family terminal, this set is likely to work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with DT, DTM, DTP, HD10, HD30, HDP20 series\u003c\/li\u003e\n  \u003cli\u003eWorks on multiple terminal sizes and positions\u003c\/li\u003e\n  \u003cli\u003eOne kit reduces the need for extra specialized tools\u003c\/li\u003e\n  \u003cli\u003eUseful across automotive and heavy equipment wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the extended slotted tip affect extraction precision?\u003c\/h3\u003e\n\u003cp\u003eThe stainless-steel shafts have extended slots that let you access the terminal latch even when pins sit deep in the connector cavity. That slot design increases leverage and visibility while releasing the retention tang, so you can pull the terminal without deforming it. Precision extraction lowers reassembly problems and preserves terminal reliability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlots reach deeper retention latches cleanly\u003c\/li\u003e\n  \u003cli\u003eImproves leverage and controlled release\u003c\/li\u003e\n  \u003cli\u003eHelps avoid bending or stretching terminals\u003c\/li\u003e\n  \u003cli\u003eEnhances repeatable, workshop-grade results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The JRready ACTCRH7A06 set is aimed at automotive technicians, fleet maintenance teams, off-road equipment mechanics, and experienced DIYers who need a compact, versatile depinning solution. If you regularly service Deutsch-family connectors or work on trucks, heavy machinery, or specialty vehicles, this kit offers a practical balance of robust metal extractors and gentle plastic removers to handle most common terminal removal tasks without wasting time sourcing multiple tools.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these tools work on DT and DTM Deutsch connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The set is compatible with common Deutsch series including DT and DTM, covering a range of terminal sizes used in automotive and equipment wiring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the metal extractors insulated for electrical safety?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They feature PA66-style insulated handles for improved grip and reduced metal contact, but they are not certified electrical insulation for live-circuit work.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55168343507287,"sku":"B0GJ3GMR83","price":48.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-front-view-depinning-kit.jpg?v=1790401084"},{"product_id":"jrready-micro-fit-terminal-extraction-tool-kit-2pc-micro-fit-3-0-with-spring-assisted-ejectors","title":"JRready Micro-Fit Terminal Extraction Tool Kit - 2pc Micro-Fit 3.0 with Spring-Assisted Ejectors","description":"\u003cp\u003e\u003cstrong\u003eJRready ST5262 is a two-piece Micro-Fit terminal removal kit that safely and quickly extracts Molex Micro-Fit 3.0 and compatible male\/female pins using spring-assisted ejector rods and hardened alloy tips.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for technicians, hobbyists, and repair pros who work with Molex MX3.0 connectors and AMP Micro Mate-N-Lok terminals, this compact kit combines a female and a male terminal extractor in one set. Each tool uses a spring-loaded ejector rod and an ergonomically shaped camouflage handle to release locking clips and push pins out from the rear of the housing without bending contacts or damaging plastic shells.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the ejector rod mechanism make pin removal easier?\u003c\/h3\u003e\n\u003cp\u003eThe ST5262 uses an integrated assist spring so the needle-like tip slips alongside the contact to depress the locking tang. When you push the rod, the spring amplifies the motion and the contact is ejected rearward, minimizing hand force and protecting fragile terminals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpring-assisted ejection for quick removal\u003c\/li\u003e\n  \u003cli\u003eNeedle head accesses contact tangs from the front\u003c\/li\u003e\n  \u003cli\u003eRear ejection preserves terminal shape and housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these tools fit both male and female Micro-Fit 3.0 terminals?\u003c\/h3\u003e\n\u003cp\u003eYes — the kit includes one tool sized for Micro-Fit 3.0 female terminals and one for Micro-Fit 3.0 male terminals, and the male extractor also works with AMP Micro Mate-N-Lok male terminals. Each tip follows common Molex dimensions for easy compatibility with MX3.0 systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes DAP-D120 equivalent for Micro-Fit 3.0 female\u003c\/li\u003e\n  \u003cli\u003eIncludes DAP-D145 equivalent for Micro-Fit 3.0 male and AMP male\u003c\/li\u003e\n  \u003cli\u003eSuitable for standard MX3.0 housings and pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre the tips durable enough for repeated use?\u003c\/h3\u003e\n\u003cp\u003eThe extraction tips are crafted from quenched alloy steel and undergo magnetic deburring and polishing to resist wear and corrosion. That process yields a smooth tip that won’t easily deform, chip, or slice plastic, extending tool life while protecting terminals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHardened alloy steel tips for strength and longevity\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion finish for workshop environments\u003c\/li\u003e\n  \u003cli\u003ePolished, non-sharp edges to avoid terminal damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the grip and handling designed for workshop use?\u003c\/h3\u003e\n\u003cp\u003eJRready upgraded the handle with an ergonomic hexagonal profile and a camouflage finish for easier identification in a tool tray. The non-slip shape provides a secure grip when working in tight spaces or when wearing gloves.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eErgonomic hexagonal handle for stable hold\u003c\/li\u003e\n  \u003cli\u003eCamouflage design improves visibility and identification\u003c\/li\u003e\n  \u003cli\u003eCompact size fits tight harnesses and enclosures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The JRready ST5262 kit is aimed at electronics technicians, appliance repairers, automotive electricians, and DIY electronics enthusiasts who frequently service Molex Micro-Fit 3.0 or AMP Mate-N-Lok connectors. It’s a practical addition to any field service kit, bench toolbox, or hobbyist workstation when precise, non-destructive pin extraction is needed.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit remove pins without damaging connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—spring assist and polished alloy tips are designed to release locking tangs and eject pins rearward without bending contacts or cracking housings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it work with AMP Micro Mate-N-Lok connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The male extractor (DAP-D145 equivalent) is compatible with AMP Micro Mate-N-Lok male terminals and Micro-Fit 3.0 male pins.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55168427458903,"sku":"B0C4PTWP8G","price":50.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-st5262-front-packaging.jpg?v=1790403661"},{"product_id":"jrready-st6295-size-20-solid-crimp-pins-for-dtm-16-22-awg-nickel-plated-purple-stripe-50-pairs","title":"JRready ST6295 Size 20 Solid Crimp Pins for DTM — 16–22 AWG, Nickel-Plated, Purple Stripe, 50 Pairs","description":"\u003cp\u003e\u003cstrong\u003eJRready ST6295 are size 20 solid crimp contacts (50 pairs) designed for DTM-style connectors, supporting 16–22 AWG wires with a 7.5A maximum rating.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese ST6295 solid pins are replacement crimp terminals made for DTM, Strike, HDP20\/HD30 and related connector families. Constructed from tin-bronze and finished with nickel plating, they prioritize electrical conductivity and resistance to corrosion. Each pack contains 50 pairs—sufficient for multiple connector assemblies or field spares—engineered to endure repeated insertion cycles and deliver a consistent crimp profile when used with the proper tooling.\u003c\/p\u003e\n\n\u003ch3\u003eWhat wire sizes and current can these solid pins handle?\u003c\/h3\u003e\n\u003cp\u003eST6295 contacts accept conductors from 16 to 22 AWG, covering common wiring sizes for automotive, industrial sensors, and low-voltage control circuits. The specified maximum continuous rating is 7.5 amps, making them suitable for signal lines and many low-power circuits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCrimp wire range: 16–22 AWG\u003c\/li\u003e\n  \u003cli\u003eMaximum current rating: 7.5 A\u003c\/li\u003e\n  \u003cli\u003eFits standard DTM and compatible multi-pin connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable are these contacts during repeated use?\u003c\/h3\u003e\n\u003cp\u003eManufactured from tin-bronze with a nickel plate, these pins resist corrosion and maintain low contact resistance over time. They have been tested through 100 engagement and disengagement cycles without electrical or mechanical failure, indicating dependable performance in service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: tin-bronze core for good conductivity\u003c\/li\u003e\n  \u003cli\u003eNickel plating increases wear and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eValidated for at least 100 mate\/unmate cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and techniques ensure a durable crimp?\u003c\/h3\u003e\n\u003cp\u003eFor consistent tensile strength and a reliable electrical joint, use a 4-indent crimp tool matched to size 20 solid contacts. Professional crimp dies produce uniform compressions and reduce the risk of loose connections compared with improvised methods.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended: 4-indent crimping tool for size 20 solid pins\u003c\/li\u003e\n  \u003cli\u003eUse correct die set for 16–22 AWG range\u003c\/li\u003e\n  \u003cli\u003eInspect crimps for proper barrel closure and wire retention\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich connectors are these contacts compatible with?\u003c\/h3\u003e\n\u003cp\u003eThese pins are intended for DTM-series and compatible connector families such as Strike, HDP20, HD30, DRB, and DRC. They are designed to seat securely in corresponding housings and latches used across automotive and industrial wiring harnesses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible connector lines: DTM, Strike, HDP20, HD30, DRB, DRC\u003c\/li\u003e\n  \u003cli\u003eSized to match standard size 20 cavities and housings\u003c\/li\u003e\n  \u003cli\u003ePack quantity: 50 pairs for rebuilding multiple connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: JRready ST6295 contacts are geared toward technicians, harness builders, and engineers who repair or assemble DTM-style connector systems. They are useful for automotive electrical repairs, custom wiring looms, industrial control panels, and anyone needing durable, field-serviceable replacement pins. Use professional crimp tooling and inspection protocols to ensure safe, reliable connections.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these contacts compatible with HD30 connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. ST6295 size 20 pins are compatible with HD30 and other DTM-style housings that accept size 20 solid contacts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What crimp tool should I use for best results?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a dedicated 4-indent crimp tool sized for size 20 solid contacts to ensure consistent crimps and proper tensile strength.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55168466190679,"sku":"B09V4TC3KL","price":54.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-st6295-front-packaging.jpg?v=1790404881"},{"product_id":"jrready-deutsch-dt-6-pin-connector-kit-st6328-6-5-sets-with-solid-contacts-seals-mounting-clips","title":"JRready Deutsch DT 6-Pin Connector Kit ST6328-6 — 5 Sets with Solid Contacts, Seals \u0026 Mounting Clips","description":"\u003cp\u003e\u003cstrong\u003eJRready ST6328-6 is a complete Deutsch DT 6-pin connector kit that includes five assembled connector sets with solid tin-bronze contacts, seals, wedgelocks, mounting clips and a removal tool for reliable, water-resistant vehicle and equipment wiring.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit provides everything technicians and hobbyists need to build durable Deutsch DT 6-pin harnesses: pre-molded housings, matched male and female solid contacts rated for 13 A (max), color-coded wedgelocks, seal plugs and accessory hardware. Components are made from PA66 nylon with a UL94-V0 flame rating and nickel-plated tin-bronze terminals to balance solderability and corrosion resistance. The package is designed for applications that demand moisture protection and mechanical stability in harsh environments such as automotive, off-highway, marine and industrial equipment.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these connectors protect wiring in wet or harsh environments?\u003c\/h3\u003e\n\u003cp\u003eThe Deutsch DT housings use precision-molded PA66 nylon and individual seals to keep moisture, dust and contaminants out of the contact area. A wedgelock system and mounting clips secure contacts and prevent accidental disengagement under vibration or movement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePA66 nylon body with UL94-V0 flame rating for durability\u003c\/li\u003e\n  \u003cli\u003eIndividual seal plugs included for each cavity to maintain water resistance\u003c\/li\u003e\n  \u003cli\u003eWedgelock pieces (orange and green) lock contacts into place\u003c\/li\u003e\n  \u003cli\u003eMounting clips add mechanical support when installed on panels or frames\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical and mechanical performance can I expect from the contacts?\u003c\/h3\u003e\n\u003cp\u003eEach solid terminal is made from tin-bronze with a nickel-plated finish for improved corrosion resistance and solderability. Contacts accept 14–20 AWG wires and are rated up to 13 A maximum, compatible with many control, sensor and low-power actuator circuits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid turned pin\/socket contacts for stable electrical connection\u003c\/li\u003e\n  \u003cli\u003eWire range 14–20 AWG accommodates common harness sizes\u003c\/li\u003e\n  \u003cli\u003e13 A maximum per contact for typical signal and low-current loads\u003c\/li\u003e\n  \u003cli\u003eCrimp or solder-ready design for flexible termination options\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich tools and accessories are included and what else is recommended?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with the practical accessories needed to assemble and maintain connectors: a removal tool, five connector sets, wedgelocks, seal plugs and mounting clips. For best crimp reliability use a dedicated Deutsch crimping tool that supports sizes 12, 16 and 20 turned contacts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: removal tool, 5 assembled DT housings (male and female), seal plugs, wedgelocks and mounting clips\u003c\/li\u003e\n  \u003cli\u003e33 pairs of solid contacts supplied (0460-215-16141\/0462-209-16141)\u003c\/li\u003e\n  \u003cli\u003eRecommended: JRready ACT-DT1 crimping tool for precise crimps\u003c\/li\u003e\n  \u003cli\u003eCrimping or soldering both supported depending on application preference\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere are these Deutsch DT connectors typically used?\u003c\/h3\u003e\n\u003cp\u003eThese DT 6-pin connectors are specified widely across mobile and stationary equipment where sealed, vibration-resistant electrical connections are required. They fit naturally in engine bays, control cabinets and external sensor locations on vehicles and machinery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrucks, buses and emergency vehicles for sensor and lighting circuits\u003c\/li\u003e\n  \u003cli\u003eConstruction, agricultural and mining equipment in exposed environments\u003c\/li\u003e\n  \u003cli\u003eMarine and recreational vehicles at engine interfaces and controls\u003c\/li\u003e\n  \u003cli\u003eMotorcycles, off-highway vehicles and aftermarket wiring projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Technicians, mechanics, fleet maintenance crews, custom vehicle builders and experienced DIYers who need a ready-to-assemble Deutsch DT 6-pin solution will find this JRready kit useful. It delivers a mix of sealed connector housings, reliable solid contacts and installation accessories so you can build or repair harnesses that withstand vibration, moisture and routine service. Note: components contain flame retardants that may produce a temporary odor; this is normal and does not affect function.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I solder these JRready solid contacts instead of crimping?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The tin-bronze contacts accept both crimping and soldering for flexible termination options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the connectors waterproof for outdoor use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are water-resistant with individual seals and wedgelocks, designed for exposed vehicle and equipment locations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55168675905879,"sku":"B09ZYCDJPS","price":54.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-dt-6pin-front-packaging.jpg?v=1790411528"},{"product_id":"jrready-deutsch-dt-2-pin-connector-kit-8-sets-solid-contacts-sealed-waterproof-housings","title":"JRready Deutsch DT 2-Pin Connector Kit, 8 Sets — Solid Contacts \u0026 Sealed Waterproof Housings","description":"\u003cp\u003e\u003cstrong\u003eJRready ST6318-201 is a complete Deutsch DT 2-pin connector kit with eight assembled connector sets, replaceable wedge locks, solid nickel-plated copper contacts and sealing plugs for reliable waterproof electrical connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit gathers the common Deutsch DT 2-pin parts technicians, electricians and DIYers need to build durable, serviceable harnesses. It combines housings, both male and female contacts, color-coded wedgelocks, and sealing plugs made from PA66 nylon and nickel-plated copper, so you can terminate, repair or prototype circuits used in automotive, marine, industrial and racing environments.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly is included in the JRready DT 2-pin connector kit?\u003c\/h3\u003e\n\u003cp\u003eThe ST6318-201 kit contains complete components to make eight Deutsch DT 2-pin connectors and extras for multiple repairs. Each part is sized for the DT06-2S and DT04-2P housings and matches the standard Deutsch male\/female contact set.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e8 sets of DT 2-pin housings (DT06-2S \u0026amp; DT04-2P)\u003c\/li\u003e\n  \u003cli\u003e10 orange female wedgelocks (W2S) and 10 green male wedgelocks (W2P)\u003c\/li\u003e\n  \u003cli\u003e16 solid contacts: 8 male (0460-215-16141) and 8 female (0462-209-16141)\u003c\/li\u003e\n  \u003cli\u003e5 sealing plugs to close unused cavities\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weatherproof are these Deutsch 2-pin connectors?\u003c\/h3\u003e\n\u003cp\u003eMaterials and plating are chosen to resist corrosion, moisture and everyday wear. The PA66 nylon housings combined with nickel-plated copper contacts provide mechanical strength and long-term electrical reliability when installed properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePA66 nylon housings for heat and abrasion resistance\u003c\/li\u003e\n  \u003cli\u003eNickel-plated copper contacts for corrosion resistance and conductivity\u003c\/li\u003e\n  \u003cli\u003eSealing plugs and wedgelocks to keep moisture and dust out\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I crimp and solder these contacts, and which tool should I use?\u003c\/h3\u003e\n\u003cp\u003eThe included solid contacts are designed to accept both crimp and solder terminations for flexibility in assembly and repair. For consistent crimps use JRready's recommended ACT-DT1 crimping tool, which matches the contact sizes specified.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContacts support crimping and soldering for strong electrical joints\u003c\/li\u003e\n  \u003cli\u003eRecommended crimp tool: JRready ACT-DT1 (supports #12, #16, #20 turned pin\/socket)\u003c\/li\u003e\n  \u003cli\u003eProper tooling reduces resistance and increases mechanical retention\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat applications are these Deutsch DT 2-pin connectors best suited for?\u003c\/h3\u003e\n\u003cp\u003eThese 2-pin Deutsch connectors are widely used where compact, sealed two-conductor connections are needed. They fit engine bays, trailers, off-road equipment, sensors, lighting circuits and other places where vibration and exposure to the elements are concerns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomotive wiring harness repairs and upgrades\u003c\/li\u003e\n  \u003cli\u003eMarine and off-road equipment where waterproofing is necessary\u003c\/li\u003e\n  \u003cli\u003eIndustrial connections for sensors and low-voltage loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: The JRready ST6318-201 kit is aimed at mechanics, electrical technicians, hobbyists and fleet maintenance teams who need a small-stock solution for making or repairing Deutsch DT 2-pin connections. If you assemble wiring harnesses, perform field repairs, or prepare vehicle and equipment installations that require sealed two-pin connectors, this kit provides the housings, wedgelocks, contacts and sealing plugs needed for multiple reliable terminations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the contacts in this kit pre-crimped?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, contacts are supplied loose for crimping or soldering to your wires using appropriate tools.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these connectors resist water and dust?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the PA66 housings, wedgelocks and sealing plugs provide a waterproof and dust-resistant connection when properly assembled.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55168995950935,"sku":"B0C1VH5NNJ","price":48.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-dt-2pin-front-packaging.jpg?v=1790416603"},{"product_id":"jrready-deutsch-connector-pin-removal-kit-st5257-pro-tools-for-dt-dtm-dtp-dtv-hd-series-6-22-awg-size-specific-extractors","title":"JRready Deutsch Connector Pin Removal Kit ST5257-PRO — Tools for DT\/DTM\/DTP\/DTV\/HD Series, 6–22 AWG Size-Specific Extractors","description":"\u003cp\u003e\u003cstrong\u003eThe JRready ST5257-PRO is a complete Deutsch connector pin extraction kit with dedicated tools for 4, 8, 12, 16 and 20 size solid and stamped contacts across DT, DTM, DTP, DTV and HD series.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit gathers the most commonly used Deutsch pin removal tools into one set so technicians, electricians and vehicle hobbyists can extract terminals cleanly without harming seals, insulation or connector bodies. Tools are molded from heavy-duty plastic for stamped contacts and include multiple sizes that correspond to 6–22 AWG ranges for solid contacts. Each tool is tailored to specific terminal diameters and connector apertures to make de-pinning repeatable and safe.\u003c\/p\u003e\n\n\u003ch3\u003eWhich connector series and terminal sizes does the kit support?\u003c\/h3\u003e\n\u003cp\u003eThe ST5257-PRO covers a broad range of Deutsch families and terminal sizes used in automotive and industrial wiring. It includes both stamped-contact removers and solid-contact extractors sized for typical AWG ranges, so you can tackle DT, DTM, DTP, DTV, HD and similar housings without guessing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSize 4 tools for 6 AWG solid contacts (max OD ~8.6 mm).\u003c\/li\u003e\n  \u003cli\u003eSize 8 tools for 8–10 AWG solid contacts (max OD ~6.5 mm).\u003c\/li\u003e\n  \u003cli\u003eSize 12 and 16 tools for 12–16 AWG solid contacts (max ODs ~4.0–3.2 mm).\u003c\/li\u003e\n  \u003cli\u003eSize 20 tools for 20–22 AWG solid contacts (max OD ~2.4 mm).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these tools protect connectors and wires during removal?\u003c\/h3\u003e\n\u003cp\u003eJRready designed each extraction piece to engage the terminal without cutting or deforming the wire insulation or the connector housing. The stamped-contact tools are plastic-molded to be thin yet resilient, reducing the chance of scrape marks or seal damage while still releasing locking tangs effectively.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlastic stamped-contact tools avoid sharp metal edges near seals.\u003c\/li\u003e\n  \u003cli\u003eSize-specific solid-contact extractors match terminal diameters closely.\u003c\/li\u003e\n  \u003cli\u003eReduced insertion force prevents dislodging adjacent terminals.\u003c\/li\u003e\n  \u003cli\u003eClear size markings help select the correct tool quickly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before using a removal tool?\u003c\/h3\u003e\n\u003cp\u003eMatching the tool to the terminal and connector aperture is essential to avoid damage. Verify the terminal diameter and wire outer diameter, and if uncertain, compare against the kit's sizing notes or contact JRready support with measurements for advice.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm terminal type: stamped or solid contact.\u003c\/li\u003e\n  \u003cli\u003eMeasure terminal diameter or check OEM specs.\u003c\/li\u003e\n  \u003cli\u003eSelect the tool sized to the terminal’s AWG range and max OD.\u003c\/li\u003e\n  \u003cli\u003eTest gently on a spare connector if available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these tools be used in the field and for repeated work?\u003c\/h3\u003e\n\u003cp\u003eThe kit is intended for frequent professional use and occasional field repairs. Durable plastic construction for stamped contacts and purpose-shaped solid-contact extractors make the set portable, lightweight, and simple to use on benches or in vehicle harnesses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact pieces fit a technician’s toolkit or service bag.\u003c\/li\u003e\n  \u003cli\u003eDesigned for quick terminal release and rework tasks.\u003c\/li\u003e\n  \u003cli\u003eEasy to clean and store between jobs.\u003c\/li\u003e\n  \u003cli\u003eManufacturer support available for compatibility questions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The JRready ST5257-PRO kit is made for automotive electricians, off-road vehicle builders, industrial maintenance teams and DIYers working on Deutsch-style connectors who need an organized selection of extraction tools. If you frequently remove or replace terminals in DT, DTM, DTP, DTV or HD series connectors, or if you maintain wiring harnesses with mixed stamped and solid contacts, this kit reduces trial-and-error, helps protect delicate seals and speeds up terminal servicing. If you’re unsure which tool fits a particular connector, keep terminal diameter details handy and contact JRready for guidance before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit work with DT and DTM series Deutsch connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The ST5257-PRO includes tools sized for DT, DTM and related Deutsch series sized 4–20 contact terminals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the plastic tools on sealed connectors without damaging seals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The stamped-contact tools are heavy-duty plastic designed to release terminals while preserving seals and insulation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55169176666455,"sku":"B0C2TTHMG4","price":87.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-front-packaging-st5257-pro.jpg?v=1790420100"},{"product_id":"jrready-deutsch-dtm-connector-kit-2-3-4-6-8-12-cavity-54-pair-size-20-nickel-plated-terminals-pa66-housings","title":"JRready Deutsch DTM Connector Kit 2–3–4–6–8–12 Cavity — 54-Pair Size‑20 Nickel-Plated Terminals \u0026 PA66 Housings","description":"\u003cp\u003e\u003cstrong\u003eJRready ST6484 is a complete Deutsch DTM connector kit that supplies 2, 3, 4, 6, 8 and 12-cavity housings, 54 pairs of nickel-plated solid size-20 terminals, seals, wedgelocks and a removal tool for reliable automotive and industrial wiring.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit bundles the core parts technicians and DIYers need to build or repair Deutsch DTM harnesses: durable PA66 nylon connector bodies in common cavity counts, matched solid male and female size-20 contacts for 20–22 AWG, sealing plugs to close unused cavities, wedgelocks for retention, and a compact plastic removal tool to extract stamped contacts without damaging the connector. Parts are broadly compatible with standard Deutsch DTM systems, and the nickel plating on the solid contacts enhances wear and corrosion resistance for long-term electrical contact integrity.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly is included in this DTM connector kit?\u003c\/h3\u003e\n\u003cp\u003eThe ST6484 kit contains connector housings in 2, 3, 4, 6, 8 and 12 cavity configurations along with wedgelocks and sealing plugs to finish each assembly. Also included are 54 pairs of solid male and female size-20 terminals sized for 20–22 AWG wiring and a plastic terminal removal tool for safe disassembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePA66 nylon DTM housings: 2\/3\/4\/6\/8\/12 cavities\u003c\/li\u003e\n  \u003cli\u003e54 pairs of size-20 male and female solid contacts (20–22 AWG)\u003c\/li\u003e\n  \u003cli\u003eRed sealing plugs for unused cavities\u003c\/li\u003e\n  \u003cli\u003eWedgelocks and Deutsch plastic removal tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the solid size-20 terminals perform and install?\u003c\/h3\u003e\n\u003cp\u003eThese terminals are solid (non-stamped) contacts with nickel plating for improved conductivity and corrosion resistance. They are designed to crimp onto 20–22 AWG wire and then insert into the DTM housing for a secure, vibration-resistant connection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNickel-plated surfaces for wear and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eSolid construction for mechanical stability under vibration\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard single-indent crimp or recommended 4-indent tools\u003c\/li\u003e\n  \u003cli\u003e54 pairs supplied to cover multi-cavity assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this kit outdoors or in wet environments?\u003c\/h3\u003e\n\u003cp\u003eDTM housings in the kit are molded from PA66 nylon and are designed to mate with sealed contacts and plugs to reduce moisture ingress. The included red sealing plugs let you close unused cavities, and when correctly assembled with sealed contacts they help maintain reliable performance in damp or dirty conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePA66 nylon bodies resist aging and environmental stress\u003c\/li\u003e\n  \u003cli\u003eSealing plugs block unused cavities from water and debris\u003c\/li\u003e\n  \u003cli\u003eProperly crimped and seated terminals form a sealed interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and best practices are recommended for assembly?\u003c\/h3\u003e\n\u003cp\u003eWhile the kit includes a Deutsch-style plastic removal tool for safe terminal extraction, quality crimps require a dedicated crimping tool. JRready recommends using a professional 4-indent crimper for the highest mechanical and electrical integrity; check each crimp visually and electrically before final installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse a 4-indent crimping tool for consistent crimps\u003c\/li\u003e\n  \u003cli\u003eConfirm terminal seating and wedgelock engagement\u003c\/li\u003e\n  \u003cli\u003eUse the included removal tool to avoid damaging seals when servicing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit best suited for? JRready ST6484 is aimed at automotive electricians, motorsport teams, off-road and marine technicians, and well-equipped DIYers who need versatile Deutsch DTM components for repair, prototyping, or custom harness work. It supplies the common cavity counts, solid terminals and service tools to assemble sealed, serviceable DTM connections for engine bays, sensor harnesses, control modules and other applications where a compact, sealed multi-pin connector is required.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these terminals compatible with 20 AWG wire?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The solid size-20 terminals in this kit are intended for 20–22 AWG wire and crimp to those gauges.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include a tool to remove contacts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A Deutsch-style plastic removal tool is included for safe extraction of stamped contacts without damaging the connector.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55170220622167,"sku":"B0DHNH5323","price":79.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-dtm-front-packaging.jpg?v=1790425350"},{"product_id":"jrready-deutsch-dt-connector-kit-2-3-4-6-pin-housings-size-16-contacts-ratchet-crimper","title":"JRready Deutsch DT Connector Kit — 2\/3\/4\/6‑Pin housings, Size 16 contacts \u0026 ratchet crimper","description":"\u003cp\u003e\u003cstrong\u003eA complete JRready DW5011 Deutsch DT connector kit supplies 2-, 3-, 4- and 6-pin Deutsch DT housings, size 16 contacts, a ratcheting crimp tool, and a pin extraction tool for durable, waterproof wiring connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis JRready DW5011 kit bundles the common Deutsch DT connector sizes and professional tools required to build, repair, or modify vehicle and equipment wiring harnesses. Designed for technicians and skilled DIYers, the set focuses on reliability in demanding environments: sealed nylon housings, nickel-plated copper-alloy pins, and a calibrated crimper ensure consistent electrical performance and long life in automotive, marine, off-road and industrial applications.\u003c\/p\u003e\n\n\u003ch3\u003eWhat parts and tools are included in this Deutsch DT kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains the most-used DT housings and the tooling to terminate and service them. It’s meant to be a standalone starter set for building or repairing harness connectors without additional purchases.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2-, 3-, 4-, and 6-pin Deutsch DT housings (glass-fiber-reinforced Nylon 66)\u003c\/li\u003e\n  \u003cli\u003eSize 16 solid copper-alloy contacts with nickel plating for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eACT-HDT-16DT ratchet crimp tool (comparable to HDT-48-00) for 12–22 AWG\u003c\/li\u003e\n  \u003cli\u003eDRK-RT1B pin removal (extraction) tool compatible with DT family connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the ratchet crimp tool improve connection quality?\u003c\/h3\u003e\n\u003cp\u003eThe included crimper is a ratcheting, adjustable tool engineered for repeatable crimps on size 16 DT contacts. It reduces inconsistent compression and loose terminals that can cause intermittent failures, saving rework time for pros and hobbyists alike.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRatcheting mechanism ensures full compression before release\u003c\/li\u003e\n  \u003cli\u003eAdjustable selector for precise crimps across 12–22 AWG conductor sizes\u003c\/li\u003e\n  \u003cli\u003eDesigned for 8-indent crimps compatible with Deutsch DT contacts\u003c\/li\u003e\n  \u003cli\u003eErgonomic handles for better leverage and reduced hand fatigue\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these connectors suitable for harsh environments?\u003c\/h3\u003e\n\u003cp\u003eYes — the housings meet IP68-style waterproof protection and are molded from glass-fiber-reinforced Nylon 66 to resist water, oil, salt and fuels. The temperature range supports typical automotive and marine conditions without deformation or seal failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP68-rated waterproof performance for dust and immersion protection\u003c\/li\u003e\n  \u003cli\u003eOperational range from -40°C to +125°C for broad environmental tolerance\u003c\/li\u003e\n  \u003cli\u003eNickel-plated contacts guard against corrosion in wet and salty environments\u003c\/li\u003e\n  \u003cli\u003eEach size 16 contact rated for 13A continuous current under proper conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will the pin removal tool help me when servicing harnesses?\u003c\/h3\u003e\n\u003cp\u003eThe DRK-RT1B extraction tool is designed to remove terminals without damaging the housing or wires. It speeds repairs and allows reuse of housings during troubleshooting or upgrades.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe extraction of pins from DT, DTP, DTM, DRB, DTV and STRIKE series\u003c\/li\u003e\n  \u003cli\u003ePrevents terminal and housing damage, preserving connector integrity\u003c\/li\u003e\n  \u003cli\u003eCompact, easy-to-use form for field and bench work\u003c\/li\u003e\n  \u003cli\u003eReduces downtime during wiring repairs and harness modifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The JRready DW5011 Deutsch connector kit is aimed at professional electricians, automotive technicians, race team mechanics, marine electricians, and dedicated DIYers who build or maintain wiring harnesses. If you assemble custom connectors, service trailers, outfit UTVs, or repair marine and agricultural equipment, this kit consolidates the essential housings, reliable size-16 contacts, a calibrated crimper and a pin extractor into one practical toolbox staple.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wire sizes work with these Deutsch DT contacts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The size 16 contacts accept 12–22 AWG conductors; the crimper is calibrated to produce proper 8-indent crimps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I reuse housings after removing terminals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The DRK-RT1B extraction tool safely removes pins so housings can be reused without damage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55170543845719,"sku":"B0DB1YMX34","price":217.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-dw5011-front-packaging.jpg?v=1790430639"},{"product_id":"jrready-dt-series-deutsch-connector-kit-708-pcs-solid-pins-14-16-awg-sealed-pa66","title":"JRready DT-Series Deutsch Connector Kit 708 pcs — Solid Pins, 14–16 AWG, Sealed PA66","description":"\u003cp\u003e\u003cstrong\u003eJRready ST6234 is a 708-piece DT-series connector kit with solid-pin terminals and a removal tool, made for durable, weather-resistant vehicle and equipment wiring for 14–16 AWG.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis comprehensive JRready kit collects the most commonly used Deutsch DT-series housings, sealed nylon shells, wedge locks, and heavy-duty solid terminals so you can build reliable multi-pin connections for engines, transmissions, chassis, and accessory wiring. Parts are molded from PA66 nylon for chemical and temperature resilience, while the included DRK-RT1 pick removal tool helps extract contacts and wedge locks without damaging housings. The kit suits technicians, fleet maintenance crews, and serious DIYers who need spare connectors and replacement terminals on hand for trucks, tractors, off-highway machines, motorcycles, boats, and emergency vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eWhich connector types and pin counts are included in the 708-piece set?\u003c\/h3\u003e\n\u003cp\u003eThe set covers DT-series two-, three-, four-, six-, eight-, and 12-pin housings plus matching solid terminals and wedges. It supplies a broad mix so you can assemble single- and multi-circuit plugs and receptacles on the fly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2, 3, 4, 6, 8 and 12-pin DT housings (male and female as required)\u003c\/li\u003e\n  \u003cli\u003eSolid copper-alloy terminals sized for 14–16 AWG wire\u003c\/li\u003e\n  \u003cli\u003eSealing plugs, wedge locks and grommets for IP-style protection\u003c\/li\u003e\n  \u003cli\u003eDRK-RT1 pick removal tool included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the solid-pin terminals perform for 14–16 AWG wiring?\u003c\/h3\u003e\n\u003cp\u003eSolid terminals in this kit are designed for secure mechanical connection and consistent electrical conductivity with 14–16 AWG conductors. Their construction improves stability under vibration and reduces contact resistance compared with loose or damaged pins.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSized to accept 14–16 AWG with correct crimp profile\u003c\/li\u003e\n  \u003cli\u003eStrong mating retention in DT housings to resist vibration\u003c\/li\u003e\n  \u003cli\u003eGood conductivity for power and signal circuits\u003c\/li\u003e\n  \u003cli\u003eEasy to crimp with standard hand crimpers or dies\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat environmental protections and materials are used?\u003c\/h3\u003e\n\u003cp\u003eHousings and accessories are molded from PA66 nylon, chosen for toughness, heat resistance, and chemical tolerance around engines and in mobile equipment. Seals and wedge locks help maintain moisture and debris resistance in exposed locations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePA66 nylon housings resist oils, fuels, and high temperature\u003c\/li\u003e\n  \u003cli\u003eIntegrated grommets and seals for splash and dust protection\u003c\/li\u003e\n  \u003cli\u003eWedge locks secure pins against accidental pull-out\u003c\/li\u003e\n  \u003cli\u003eSuitable for under-hood, chassis, and outdoor exposures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and small parts are included, and how do they help installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes the DRK-RT1 pick removal tool and assorted wedges and seals so you can assemble, service, and repair DT connections without needing additional specialty tools. The removal tool extracts contacts and wedge locks safely for reuse or replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDRK-RT1 pick tool: hook and small screwdriver ends for safe contact removal\u003c\/li\u003e\n  \u003cli\u003eWedge locks: retain terminals inside housings under vibration\u003c\/li\u003e\n  \u003cli\u003eSealing plugs: close unused cavities to maintain protection\u003c\/li\u003e\n  \u003cli\u003eOrganized case for quick access to common parts during repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This JRready ST6234 kit is aimed at vehicle electricians, field technicians, fleet maintenance teams, and skilled DIYers who need a ready supply of genuine-style DT-series connectors and solid terminals for 14–16 AWG wiring. It’s especially useful for work on trucks, buses, off-highway equipment, agricultural machinery, emergency vehicles, recreational marine setups, and motorcycles where sealed, vibration-resistant connections are required. The kit saves time on repairs and reduces downtime by keeping common housings, pins, seals, and a removal tool on hand.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these terminals compatible with 14 AWG and 16 AWG wire?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The solid-pin terminals in this kit are sized to accept and crimp securely to 14–16 AWG conductors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include a tool to remove pins without damaging the connector?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The DRK-RT1 pick removal tool is included for safe contact and wedge lock extraction.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55170596634967,"sku":"B099PMB52Y","price":268.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-dt-connector-kit-case-open.jpg?v=1790431463"},{"product_id":"jrready-deutsch-connector-crimp-tool-kit-st2173-25-piece-act-hdt-ratchet-crimper-with-pin-removal-tools","title":"JRready Deutsch Connector Crimp Tool Kit ST2173 — 25‑Piece ACT-HDT Ratchet Crimper with Pin Removal Tools","description":"\u003cp\u003e\u003cstrong\u003eJRready 25-piece ST2173 kit is a complete Deutsch connector crimping and pin-removal set built to make automotive and marine wiring faster, cleaner, and more reliable.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit combines a precision ACT-HDT ratcheting crimp tool with a selection of Deutsch-compatible solid and stamped contact removal tools, sized to cover common 4, 8, 12, 16 and 20 contacts. It’s intended for mechanics, electricians and DIYers who need consistent crimps and quick depinning for DT\/DTM\/DTP and Amphenol-style connectors in cars, trucks, RVs, motorcycles and boats.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the ACT-HDT crimp tool improve field work?\u003c\/h3\u003e\n\n\u003cp\u003eThe ACT-HDT is a lightweight, single-handed ratchet crimper that reduces the force needed to complete a full crimp while holding pressure until the cycle finishes. That ratchet action helps produce repeatable, secure crimps with less wrist fatigue than non-ratcheting pliers, making long jobs easier and more consistent.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt-in ratchet locks until crimp completion for consistent results\u003c\/li\u003e\n  \u003cli\u003eErgonomic single-hand operation reduces operator strain\u003c\/li\u003e\n  \u003cli\u003eOptimized for 12–22 AWG Deutsch and Amphenol turned contacts\u003c\/li\u003e\n  \u003cli\u003eCompact, durable construction for workshop or field environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich connector types and contact sizes are supported?\u003c\/h3\u003e\n\n\u003cp\u003eJRready’s kit works with Deutsch DT, DTM, DTP series and Amphenol AT\/ATM\/ATP turned contacts, covering the typical automotive contact sizes. The included removal tools address both solid and stamped contact styles across five common sizes so you can depin or re-pin without damaging housings.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSupports Deutsch DT\/DTM\/DTP and Amphenol-series turned contacts\u003c\/li\u003e\n  \u003cli\u003eCrimp range: 12–22 AWG for a broad set of wire gauges\u003c\/li\u003e\n  \u003cli\u003ePin removal tools for 4, 8, 12, 16, 20 contact sizes\u003c\/li\u003e\n  \u003cli\u003eWorks with both solid and stamped contact constructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat results can I expect from the 4\/8 indent crimp pattern?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit’s double-action crimp head creates a 4\/8 indent that secures the conductor and insulator area for maximum tensile hold. That profile reduces the risk of wire pull-out and improves mechanical stability without altering connector geometry when done correctly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e4\/8 indent meets common Deutsch HDT-48-00-style crimp expectations\u003c\/li\u003e\n  \u003cli\u003eImproves tensile strength and contact retention under vibration\u003c\/li\u003e\n  \u003cli\u003eMinimizes chances of poor contact or wire slippage\n\u003c\/li\u003e\n  \u003cli\u003eProduces consistent crimps suitable for repair and production tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories are included and how do they help on the job?\u003c\/h3\u003e\n\n\u003cp\u003eThe 25-piece set bundles the crimp tool with a range of pin extraction tools and a protective storage case so you have both the hand tool and the removers in a single kit. This combination saves time during diagnostics, repairs, and panel wiring because you won’t need to hunt for separate depinning tools.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eACT-HDT ratchet crimper in a durable carry case for transport\u003c\/li\u003e\n  \u003cli\u003eMultiple pin removal tools sized for common Deutsch contacts\u003c\/li\u003e\n  \u003cli\u003eSpare bits and fittings to handle both solid and stamped contacts\u003c\/li\u003e\n  \u003cli\u003eOrganized layout for quick access during field or shop work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The JRready ST2173 kit is aimed at professional technicians, mobile electricians, race shop mechanics and serious DIYers who work with Deutsch and Amphenol automotive connectors. If you need a dependable crimper plus depinning tools for routine wiring, repairs or retrofit projects, this kit provides the core tools to get work done efficiently without carrying multiple single-purpose instruments.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this crimper handle both Deutsch and Amphenol contacts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The ACT-HDT is compatible with Deutsch DT\/DTM\/DTP and Amphenol AT\/ATM\/ATP turned contacts across the 12–22 AWG range.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the pin removal tools safe for connector housings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The removal tools are sized for 4\/8\/12\/16\/20 contacts to depin without damaging common Deutsch housings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55170648179031,"sku":"B0D2KWS9SH","price":262.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-act-hdt-crimp-tool-front-view.jpg?v=1790432370"},{"product_id":"jrready-deutsch-dt-connector-kit-dw5007-02-2-3-4-6-8-12-pin-housings-16-size-contacts-ratcheting-crimp-tool","title":"JRready Deutsch DT Connector Kit DW5007-02 — 2\/3\/4\/6\/8\/12‑pin housings, 16‑size contacts \u0026 ratcheting crimp tool","description":"\u003cp\u003e\u003cstrong\u003eThe JRready DW5007-02 Deutsch Connector Kit is a complete DT-series wiring solution that includes multi-pin Deutsch connectors, 16-size solid contacts, waterproof rear seals, and a ratcheting crimp tool for reliable, field-ready electrical connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit combines rugged Deutsch DT connectors with matched solid contacts and a three-position crimp tool so you can assemble durable, IP68-rated plug-and-socket connections for vehicles and equipment. Everything is sized and specified to work across common Deutsch and Amphenol families, letting technicians, mechanics, and hobbyists build or repair harnesses without guessing compatibility or tool performance.\u003c\/p\u003e\n\n\u003ch3\u003eWhat components are included and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eYou get DT-series female and male housings in multiple pin counts, 16-size solid green contacts rated for 14–20 AWG, yellow non-conductive rear seals, and a NEW-DT2 style crimp tool equivalent to HDT-48-00. Each part is chosen to ensure secure mechanical and electrical performance in harsh conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDT connectors: multiple pin counts (2, 3, 4, 6, 8, 12) for varied wiring needs.\u003c\/li\u003e\n  \u003cli\u003e16 solid green contacts: compatible with DT and many Amphenol series, rated up to 13A.\u003c\/li\u003e\n  \u003cli\u003eYellow rear seals: fill unused cavities and maintain waterproofing.\u003c\/li\u003e\n  \u003cli\u003eThree-in-one ratcheting crimp tool: supports 12–22 AWG, ensures consistent crimps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the crimp tool improve assembly consistency?\u003c\/h3\u003e\n\u003cp\u003eThe included NEW-DT2 crimp tool uses a double-action ratchet and a 4-mandrel, 8-indent crimp pattern to produce repeatable, high-tensile crimps. The ratchet prevents premature release so every crimp completes fully, reducing rework and loose contacts in the field.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble-action ratchet guarantees full-cycle crimps before release.\u003c\/li\u003e\n  \u003cli\u003e4-mandrel, 8-indent pattern for robust mechanical and electrical joint.\u003c\/li\u003e\n  \u003cli\u003eThree-positioner handles 12, 16, and 20 closed-barrel terminals.\u003c\/li\u003e\n  \u003cli\u003eWorks across 12–22 AWG for versatile harness builds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these connectors waterproof and durable enough for outdoor use?\u003c\/h3\u003e\n\u003cp\u003eYes — the DT series parts in this kit use an enhanced seal-retention design and materials rated for harsh environments, including IP68-level protection when mated correctly. They resist corrosion and tolerate wide temperatures, making them suitable for off-road, marine, agricultural, and emergency vehicle applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnhanced seals and rear seals preserve IP68-level waterproofing.\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -40°C to 125°C for broad operating conditions.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant housings remain stable in salt and damp environments.\u003c\/li\u003e\n  \u003cli\u003eCompatible with legacy DT connectors to maintain system continuity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich wiring and bus types are these contacts compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe kit’s size 16 solid contacts accept 14–20 AWG conductors and are interoperable with various Deutsch and Amphenol families, making them an excellent choice for headlights, sensors, actuators, and control circuits. They’re rated for repeated insertions and reliable current transfer in automotive and industrial systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible series: Deutsch DT, DTM, DTP, DTHD and Amphenol AT, ATM, ATP families.\u003c\/li\u003e\n  \u003cli\u003eRated up to 13A with stable conductivity across cycles.\u003c\/li\u003e\n  \u003cli\u003eDurable for over 500 insertion\/extraction cycles under normal usage.\u003c\/li\u003e\n  \u003cli\u003eSuitable for wiring headlights, solenoids, fans, gauges, and actuators.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit built for? Electricians, fleet maintainers, off-road builders, marine technicians, and DIYers who need a single, compatible kit to build or repair Deutsch DT harnesses will appreciate this set. It’s targeted at professionals and knowledgeable hobbyists who require IP68-capable connectors, reliable crimp tooling, and parts that match industry-standard Deutsch and Amphenol systems. If you work on trucks, boats, ATVs, agricultural equipment, or custom vehicles and want a dependable field-ready solution, this kit saves time and reduces compatibility guesswork.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the contacts fit older Deutsch connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The size 16 solid contacts are compatible with legacy Deutsch DT series and many Amphenol equivalents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wire sizes can the crimp tool handle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The included crimp tool supports 12–22 AWG and handles 12, 16, and 20 closed-barrel terminals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55170669707607,"sku":"B0D9K8RVFW","price":340.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-deutsch-connector-kit-front-view.jpg?v=1790432777"},{"product_id":"jrready-deutsch-dtm-connector-kit-542-pc-2-3-4-6-8-12-pin-housings-size-20-contacts-waterproof-pa66","title":"JRready Deutsch DTM Connector Kit 542‑pc — 2\/3\/4\/6\/8\/12‑Pin Housings, Size‑20 Contacts, Waterproof PA66","description":"\u003cp\u003e\u003cstrong\u003eJRready ST6332-01 is a complete 542-piece Deutsch DTM connector kit built for reliable, waterproof automotive and off-road electrical connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit collects a wide range of Deutsch-style DTM housings, size-20 solid contacts, seal plugs and tools so you can assemble and service vehicle wiring harnesses without buying parts separately. All components are molded from durable PA66 nylon and designed for 20–22 AWG wiring, making the set suitable for repairs, prototypes and small production runs across cars, trucks, motorcycles, boats and industrial equipment.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly is included in the JRready DTM connector kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit bundles multiple pin-count housings, a large quantity of solid contacts, seals and mounting accessories plus extraction tools so you can terminate and maintain connectors on-site. Parts come in quantities that cover common automotive uses and allow for spare parts storage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnector housings: 18×2-pin, 7×3-pin, 8×4-pin, 5×6-pin, 2×8-pin, 2×12-pin.\u003c\/li\u003e\n  \u003cli\u003eContacts: 159 pairs of size-20 barrel-style solid contacts (for 20–22 AWG).\u003c\/li\u003e\n  \u003cli\u003eAccessories: 20 seal plugs, 10 mounting clips, contact removal tool, Deutsch extraction tool.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the size-20 solid contacts perform and how are they installed?\u003c\/h3\u003e\n\u003cp\u003eSize-20 solid contacts are chosen for their mechanical stability and good conductivity on 20–22 AWG wiring. They crimp to the wire, then insert into the DTM housing until they latch; the included removal tool releases pins for rework or replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCurrent handling: up to 7.5 A per contact under proper conditions.\u003c\/li\u003e\n  \u003cli\u003eConnection method: crimp the barrel-style contact to wire, then seat into the housing.\u003c\/li\u003e\n  \u003cli\u003eServiceability: contacts are removable using the supplied extraction tool.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these connectors waterproof and rugged enough for harsh environments?\u003c\/h3\u003e\n\u003cp\u003eThe housings are molded from PA66 nylon and fitted with seal plugs to resist moisture and contaminants in demanding vehicle or marine settings. While not a guarantee of absolute ingress protection ratings in every configuration, the kit’s materials and seals are engineered for long-term outdoor and mobile use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: high-strength PA66 nylon for temperature and chemical resistance.\u003c\/li\u003e\n  \u003cli\u003eSealing: included seal plugs help prevent water and dirt intrusion around unused cavities.\u003c\/li\u003e\n  \u003cli\u003eUse cases: suitable for off-road, marine, construction and emergency vehicle wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools are provided and which Deutsch series does the removal tool support?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a plastic contact removal tool for extracting pins and sockets plus a Deutsch connector extraction tool equivalent to DRK-RT1. These tools simplify maintenance and compatibility checks across multiple Deutsch connector families.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContact tool: plastic extraction tool for size-20 contacts and housings.\u003c\/li\u003e\n  \u003cli\u003eExtraction tool: removes wedge locks and releases pins on DT, DTM, DTP, DRB, DTV and STRIKE series.\u003c\/li\u003e\n  \u003cli\u003ePractical benefit: reduces harness downtime and avoids damage during pin replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: technicians, hobbyists and fleet mechanics who need a versatile stock of Deutsch DTM components for repairs, prototyping or custom harness builds. If you work on automotive, marine, agricultural or off-road electrical systems and want a single kit that covers common pin counts, termination hardware and service tools, this JRready set gives the parts and instruments to get the job done efficiently.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wire size do the contacts support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Size-20 solid contacts are intended for 20–22 AWG wire and carry up to 7.5 A when properly crimped.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the extraction tool remove pins from other Deutsch series?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the included tool works with DT, DTM, DTP, DRB, DTV and STRIKE series connectors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55170861072727,"sku":"B0C2BW6JLR","price":206.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-dtm-connector-front-packaging.jpg?v=1790434788"},{"product_id":"jrready-deutsch-crimping-tool-st2169-3-positioners-12-22-awg-closed-barrel-ratchet-crimper","title":"JRready Deutsch Crimping Tool ST2169 — 3 Positioners (12–22 AWG), Closed-Barrel Ratchet Crimper","description":"\u003cstrong\u003eJRready Deutsch Crimp Tool ST2169 is a compact, detachable-positioner crimper engineered to create consistent 4\/8 indent closed-barrel crimps for Deutsch DT\/DTM\/DTP and Amphenol AT\/ATP\/ATM series contacts (12–22 AWG).\u003c\/strong\u003e\n\n\u003cp\u003eThe ST2169 combines a lightweight, single-handed frame with three interchangeable positioners to simplify field and production crimping of solid pin and socket contacts. Its built-in ratchet and double-action mechanism control stroke and force so each crimp completes to a repeatable profile without manual height adjustments. Designed for service technicians and assembly teams that work on automotive, industrial, agricultural, and marine equipment, this tool supports fast setup and consistent results across high volumes.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the detachable positioner system speed up work?\u003c\/h3\u003e\n\u003cp\u003eThe tool ships with three removable positioners sized for #12, #16, and #20 contacts so you swap guides instead of recalibrating the tool. The corrugated spring anti-loose design holds positioners securely, reducing interruptions and preventing dropped parts during production. This makes transitions between contact sizes quicker and minimizes trial-and-error adjustments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree positioners (#12, #16, #20) for common Deutsch\/Amphenol sizes\u003c\/li\u003e\n  \u003cli\u003eQuick-install, anti-loose corrugated spring retention\u003c\/li\u003e\n  \u003cli\u003eNo manual height setting required—faster changeovers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this tool deliver reliable crimps for Deutsch and Amphenol contacts?\u003c\/h3\u003e\n\u003cp\u003eThe ST2169 is built to meet the crimp profiles required by Deutsch HDT-style contacts and compatible Amphenol series. It uses a double-action ratchet and 4\/8 indent jaws to form closed-barrel crimps that maximize mechanical hold and electrical contact area. The integrated ratchet locks until the correct crimp stroke completes, producing repeatable crimps suited for repair and assembly tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4\/8 indent closed-barrel crimp geometry for secure connections\u003c\/li\u003e\n  \u003cli\u003eBuilt-in ratchet ensures full stroke and consistent crimps\u003c\/li\u003e\n  \u003cli\u003eRange covers 12–22 AWG solid pin and socket contacts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the ST2169 practical for field service and tight spaces?\u003c\/h3\u003e\n\u003cp\u003eYes — the tool is sized for single-handed operation and built to be compact and lightweight for mobile technicians. Low required press force and the ratchet mechanism reduce fatigue during repetitive crimps. Its robust construction also tolerates on-site conditions common to automotive, construction, and marine environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact, single-handed design for confined working areas\u003c\/li\u003e\n  \u003cli\u003eReduced hand force thanks to mechanical advantage and ratchet\u003c\/li\u003e\n  \u003cli\u003eDurable build for harsh environments and frequent use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat applications and contact types does it support?\u003c\/h3\u003e\n\u003cp\u003eThe ST2169 is intended for turned contacts used in Deutsch DT, DTM, DTP and Amphenol AT, ATP, ATM series connectors. It suits assembly, replacement, and field repairs across vehicles, equipment, and marine systems. Use it where closed-barrel crimps are specified and where consistent tensile strength and contact integrity are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Deutsch DT\/DTM\/DTP and Amphenol AT\/ATP\/ATM series\u003c\/li\u003e\n  \u003cli\u003eSuitable for automotive, truck, agricultural, racing, and marine use\u003c\/li\u003e\n  \u003cli\u003eWorks with solid pin and socket contacts, 12–22 AWG\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: technicians and small production teams who need a dependable, portable crimping solution compatible with Deutsch and Amphenol turned contacts. If you perform frequent connector assembly, on-vehicle repairs, or field service where repeatable closed-barrel crimps matter, the JRready ST2169 provides a balance of speed, consistency, and tool portability without requiring bench presses or frequent recalibration.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What contact sizes does the ST2169 support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It supports turned contacts for Deutsch DT\/DTM\/DTP and Amphenol AT\/ATP\/ATM series, covering 12–22 AWG.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the tool require calibration between size changes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—interchangeable positioners (#12, #16, #20) install quickly without manual height adjustments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55170957607255,"sku":"B0CL1S23MS","price":169.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-st2169-front-view.jpg?v=1790435514"},{"product_id":"jrready-36-piece-depinning-tool-kit-metal-handle-labeled-case-36-interchangeable-tips-for-automotive-connectors","title":"JRready 36‑Piece Depinning Tool Kit – Metal Handle, Labeled Case \u0026 36 Interchangeable Tips for Automotive Connectors","description":"\u003cp\u003e\u003cstrong\u003eJRready 36PCS Depinning Tool Kit is a compact, labeled terminal removal set with one metal handle and 36 interchangeable tips for safely extracting pins from automotive and industrial electrical connectors.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis professional-grade depinning kit organizes common terminal extraction tools into a single portable case. Each tip is laser-engraved and stored in a numbered slot that matches the tip’s marking, making it fast to identify the right tool for TE, Deutsch, Delphi, Harting, Yazaki and many other connector families. The metal handle includes a protective sheath and an internal storage channel for slim tips, keeping parts protected and ready for field or bench work.\u003c\/p\u003e\n\n\u003ch3\u003eWhat types of connectors will this depinning kit work with?\u003c\/h3\u003e\n\u003cp\u003eThe JRready set covers a wide range of automotive, heavy equipment and industrial connector systems. The 36 tips include flats, hooks and forks sized to release terminals and retainer locks across many brand standards.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with TE, Deutsch, Delphi, Harting and Yazaki series.\u003c\/li\u003e\n  \u003cli\u003eIncludes multiple pin widths and shapes for sealed and unsealed housings.\u003c\/li\u003e\n  \u003cli\u003eLaser-marked tips enable quick matching to connector types.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the storage case and labeling speed up repairs?\u003c\/h3\u003e\n\u003cp\u003eThe molded storage case has numbered slots that correspond exactly to the markings on each tip, which reduces time spent searching for the correct tool. After use, tips return to their original position for immediate accessibility during the next job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEach slot labeled with the tip’s serial number for instant reference.\u003c\/li\u003e\n  \u003cli\u003eCompact case fits in a toolbox or technician bag without rattling parts.\u003c\/li\u003e\n  \u003cli\u003eClear organization minimizes errors and speeds diagnostics in the field.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and durability features does the metal handle provide?\u003c\/h3\u003e\n\u003cp\u003eThe metal handle is built to take repeated use while keeping technicians safe. A protective sheath covers the inserted tip when not in use, and the handle also stores thin tips up to 8.5mm thick to prevent loss and accidental injury.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable metal construction for sustained leverage and feel.\u003c\/li\u003e\n  \u003cli\u003eSheath protects tips and hands during transport and storage.\u003c\/li\u003e\n  \u003cli\u003eInternal tip storage accepts tips up to 8.5mm thickness for convenience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I choose the right tip from the 36 included options?\u003c\/h3\u003e\n\u003cp\u003eSelect tips by matching the laser-etched model number on the tip to the connector specification or the slot label in the case. If unsure, start with the tip that fits snugly into the terminal aperture and gently test release to avoid bending pins.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse tip markings and case labels to match connector series precisely.\u003c\/li\u003e\n  \u003cli\u003eBegin with the smallest matching tip and increase size only if needed.\u003c\/li\u003e\n  \u003cli\u003ePractice on a spare connector to avoid damage on critical harnesses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: JRready’s 36PCS Depinning Tool Kit is designed for electricians, automotive technicians, fleet maintenance crews, hobbyists and OEM\/aftermarket wire harness technicians who need a reliable, organized toolset for terminal removal. It’s also well-suited to field service professionals who require a portable, clearly labeled kit to troubleshoot and rework connectors quickly and safely.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these tips remove both sealed and unsealed terminals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 36-tip selection includes shapes and widths suited for many sealed and unsealed terminals across common connector brands.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the metal handle compatible with all included tips?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The handle accepts all tips in the set and can store tips up to 8.5mm thick when not in use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55170971795799,"sku":"B0GF252T8S","price":95.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-depinning-kit-open-case.jpg?v=1790435902"},{"product_id":"jrready-st5355-terminal-removal-tool-kit-16-in-1-all-metal-depinning-set-with-quick-change-handle-and-16-precision-tips","title":"JRready ST5355 Terminal Removal Tool Kit – 16-in-1 All‑Metal Depinning Set with Quick‑Change Handle and 16 Precision Tips","description":"\u003cp\u003e\u003cstrong\u003eThe JRready ST5355 Terminal Removal Tool Kit is a 16-in-1 all-metal depinning set designed to remove and replace pins from a wide range of automotive and electronics connectors without damaging contacts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit combines a quick-change metal handle with 16 precision-machined tips to cover popular automotive terminal families (AMP\/TE, Delphi\/Aptiv, Sumitomo, Yazaki) and common electronics connectors (Molex Mini-Fit, Micro-Fit, ATX, PCIe). Each tip is wire-EDM cut, deburred and polished so it slips into release channels cleanly and reduces the risk of bending locking tangs or deforming housings. The handle stores multiple tips for faster swaps on the bench or in the field, making the ST5355 useful for auto technicians, hobbyists, and PC builders alike.\u003c\/p\u003e\n\n\u003ch3\u003eWhich connectors will this kit remove pins from?\u003c\/h3\u003e\n\u003cp\u003eThe ST5355 supports many OEM connector families across automotive and electronics applications. It’s suitable for multi-pin automotive modules, ignition coils, and common PC power connectors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAMP\/TE styles: MCP, MCON, MQS, Micro Timer\u003c\/li\u003e\n  \u003cli\u003eDelphi\/Aptiv: GT150, Metri-Pack 280\/480\u003c\/li\u003e\n  \u003cli\u003eSumitomo: DS, MT, HD, HM, HW and Yazaki Kaizen 0.64\u003c\/li\u003e\n  \u003cli\u003eMolex: Mini-Fit Jr., Micro-Fit 3.0, ATX, EPS, PCIe and small fan headers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the quick-change handle make repairs faster?\u003c\/h3\u003e\n\u003cp\u003eThe durable all-metal handle holds tips securely and stores up to eight replacements inside, so you swap tools without hunting through a toolbox. The ergonomic textured grip improves control during delicate extractions and repetitive work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInternal tip storage for on-the-job convenience\u003c\/li\u003e\n  \u003cli\u003ePositive locking mechanism keeps tips in place under leverage\u003c\/li\u003e\n  \u003cli\u003eComfort grip reduces hand fatigue during long tasks\u003c\/li\u003e\n  \u003cli\u003eSturdy metal construction resists wear from repeated use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these tips damage terminals or connector housings?\u003c\/h3\u003e\n\u003cp\u003eNo—tips are manufactured with precision geometry to engage release tangs without slipping or bending. Each tool is wire-EDM cut, then deburred and polished to fit release channels cleanly and reduce the risk of nicking contacts or deforming housings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-fit tip profiles minimize slippage\u003c\/li\u003e\n  \u003cli\u003ePolished edges reduce scraping or gouging\u003c\/li\u003e\n  \u003cli\u003eDesigned for 1.0, 1.5, 2.2 and 2.8 mm terminal sizes\u003c\/li\u003e\n  \u003cli\u003eReplaceable tips let you swap worn pieces instead of the whole handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this kit for PC builds and electronics repair?\u003c\/h3\u003e\n\u003cp\u003eYes—the kit includes Molex-compatible tips and cross-references to common OEM part numbers, so it works for power supply connectors and many small electronics housings. It’s a versatile choice when you need to depin Molex, ATX, PCIe or custom cable connectors safely.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCross-references: Molex D173 (11-03-0044) and D120\/D145 (11-03-0043)\u003c\/li\u003e\n  \u003cli\u003eCompatible with Mini-Fit Jr., Micro-Fit 3.0, and fan\/3–4 pin connectors\u003c\/li\u003e\n  \u003cli\u003eUseful for PC power cable repairs and custom wiring projects\u003c\/li\u003e\n  \u003cli\u003eAlso suited for industrial equipment connector maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The JRready ST5355 is made for professional mechanics, wiring harness technicians, electrical installers and serious DIYers who need a single, dependable toolset to service multiple connector standards. If you regularly work on automotive wiring, perform ECU or module repairs, build or modify PC cables, or maintain industrial equipment connectors, this kit replaces multiple brand-specific extractors and reduces the time and risk involved in pin removal. It’s also a practical choice for mobile technicians who want a compact, durable set that travels well and keeps essential tips at hand.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit work with Delphi\/Metri-Pack connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes tips compatible with Delphi\/Aptiv Metri-Pack 280\/480 and GT150 families.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are replacement tips available separately?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replacement tips match OEM cross-references listed and can be ordered individually for worn pieces.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55171514073431,"sku":"B0DBZHSGJY","price":68.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-st5355-front-packaging.jpg?v=1790447390"},{"product_id":"jrready-deutsch-dtp-dthd-connector-kit-1-2-4-pin-27-pairs-size-12-solid-pins-12-16-awg","title":"JRready Deutsch DTP \u0026 DTHD Connector Kit 1\/2\/4‑Pin — 27 Pairs Size‑12 Solid Pins, 12–16 AWG","description":"\u003cp\u003e\u003cstrong\u003eThe JRready ST6485 Deutsch connector kit supplies ready-to-install DTP and DTHD housings, 27 pairs of size‑12 solid male and female contacts, seal plugs, and a contact removal tool for reliable 12–16 AWG wiring.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit collects the common Deutsch building blocks technicians use to assemble waterproof, serviceable harnesses for industrial vehicles, off‑road equipment, and specialty electronics. It includes 1‑pin DTHD inline housings, 2‑ and 4‑pin DTP wedgelockable housings, a full set of nickel‑plated solid contacts rated for 12–16 AWG, sealing plugs, and a plastic removal tool—so you can prepare, crimp, seal, and repair connections on the workbench or in the field.\u003c\/p\u003e\n\n\u003ch3\u003eWhat components are included and how are they constructed?\u003c\/h3\u003e\n\u003cp\u003eThe kit bundles housings, 27 male\/female contact pairs, wedgelocks, seal plugs and a contact removal tool. Housings use durable polymer materials and the terminals are nickel‑plated solid pins built for repeated service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDTP 2‑pin and 4‑pin housings made from PA66 nylon for mechanical strength and heat resistance.\u003c\/li\u003e\n  \u003cli\u003eDTHD single‑pin housings molded from PC with integrated latches and rubber seals for waterproofing.\u003c\/li\u003e\n  \u003cli\u003e27 pairs of size‑12 solid male and female contacts, nickel‑plated to resist corrosion and wear.\u003c\/li\u003e\n  \u003cli\u003eSeal plugs and a compact plastic stamped‑contact removal tool for safe disassembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the contacts and housings handle wiring and sealing?\u003c\/h3\u003e\n\u003cp\u003eSize‑12 solid contacts accept 12–16 AWG conductors and have a solid cross‑section for better mechanical stability than thin stamped contacts. The DTHD housings include rubber sealing rings and integrated latches to maintain a weather‑resistant connection when mated or mounted.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid terminals provide firm crimps and consistent conductivity for 12–16 AWG wires.\u003c\/li\u003e\n  \u003cli\u003eNickel plating improves corrosion resistance in harsh environments.\u003c\/li\u003e\n  \u003cli\u003eRubber seals in DTHD housings protect against moisture ingress and contaminants.\u003c\/li\u003e\n  \u003cli\u003ePA66 DTP housings resist vibration and high temperatures in engine bays and equipment enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and techniques are recommended for reliable crimps and repairs?\u003c\/h3\u003e\n\u003cp\u003eA proper crimping tool and the included removal tool are essential for durable terminations. JRready recommends professional 4‑indent crimping tools to form consistent crimps on solid size‑12 contacts and the supplied removal tool to extract terminals without damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse a dedicated 4‑indent crimper suited for size‑12 solid contacts for repeatable quality.\u003c\/li\u003e\n  \u003cli\u003eThe compact plastic removal tool extracts stamped contacts cleanly and preserves seals and housings.\u003c\/li\u003e\n  \u003cli\u003eConfirm wire strip lengths and inspect each crimp for good metal‑to‑metal contact before inserting into housings.\u003c\/li\u003e\n  \u003cli\u003eInstall wedgelocks and seal plugs to ensure vibration resistance and waterproofing where required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit simplify field service and harness assembly?\u003c\/h3\u003e\n\u003cp\u003eThe assortment of common Deutsch housings, a generous supply of matched contacts, and the removal tool let technicians assemble and repair harnesses without returning to a parts bin. Color‑coded housings and sealed single‑pin options make it simple to create in‑line splices or panel mount connections that stand up to outdoor conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReady‑to‑use quantities of contacts reduce downtime when rebuilding or extending harnesses.\u003c\/li\u003e\n  \u003cli\u003eDTHD single‑pin parts allow inline or mounted power\/signal terminations with integrated latches.\u003c\/li\u003e\n  \u003cli\u003eWedgelocks and seal plugs keep multi‑cavity DTP connectors secure under vibration.\u003c\/li\u003e\n  \u003cli\u003eThe removal tool enables service without cutting wires or destroying connectors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: technicians, fleet mechanics, custom harness builders, and OEM fitters who need a reliable, field‑serviceable collection of Deutsch size‑12 connectors and solid contacts. The JRready ST6485 kit is especially useful when you want corrosion‑resistant terminals, waterproof single‑pin options, and the convenience of a contact removal tool to support assembly, maintenance, and repair tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the contacts in this kit suitable for 12 AWG wire?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The size‑12 solid male and female contacts are intended for 12–16 AWG conductors and crimp well with a 4‑indent tool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the DTHD 1‑pin connectors be used inline and stay waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. DTHD single‑pin housings include rubber sealing rings and an integrated latch for waterproof inline or mounted use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JRready","offers":[{"title":"Default Title","offer_id":55171584491863,"sku":"B0DHNG1SXD","price":79.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jrready-dtp-4pin-front.jpg?v=1790448429"}],"url":"https:\/\/britishgarage.co.uk\/collections\/jrready.oembed","provider":"British Garage","version":"1.0","type":"link"}