{"title":"JURPLIX","description":"\u003cp\u003eBrowse 20 JURPLIX products at British Garage, including motorcycle \u0026amp; atv parts, fuel system parts and headlights \u0026amp; tail light units. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked UK delivery on every order and 30-day returns.\u003c\/p\u003e","products":[{"product_id":"jurplix-forward-and-reverse-relay-module-12v-80a-heavy-duty-brass-studs-corrosion-resistant","title":"JURPLIX Forward and Reverse Relay Module 12V 80A Heavy‑Duty Brass Studs Corrosion‑Resistant","description":"\u003cp\u003e\u003cstrong\u003eJURPLIX Forward and Reverse Relay Module is a heavy‑duty 12VDC switching unit that enables reliable motor direction reversal for winches, lifts, vents and similar equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact relay assembly replaces part numbers 5541100 and 24452 and is built to handle high current loads while resisting rust and moisture. It’s engineered with brass studs and a robust housing to control directional change in DC motors used for tarpaulin systems, truck winches, boat jack lifts, electric trim tabs, fans and vents. Use it to swap a failed relay or upgrade existing reversal controls for better durability and responsive switching.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this relay module reverse motor direction reliably?\u003c\/h3\u003e\n\u003cp\u003eThe module uses a set of heavy‑duty contacts and studs to reroute power polarity, allowing a motor to run forward or reverse as needed. Its construction supports intermittent peak currents and sustained continuous loads without rapid wear, delivering consistent directional control.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12VDC operation for standard vehicle and marine electrical systems\u003c\/li\u003e\n  \u003cli\u003e80A rating for intermittent duty, 50A continuous duty capacity\u003c\/li\u003e\n  \u003cli\u003eBrass studs and corrosion‑resistant materials for longevity\u003c\/li\u003e\n  \u003cli\u003eDesign optimized for fast, repeatable switching under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat equipment and systems can it power and replace?\u003c\/h3\u003e\n\u003cp\u003eThis relay module is suitable wherever directional motor control is required. It fits tarpaulin systems, trailer and truck winches, boat jack lifts, hatch actuators, trim tabs, intake\/exhaust fans and other 12V DC reversing motors, and it can substitute for common OEM part numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible replacements: 5541100, 24452, ATP0110, K10746M, 13994\u003c\/li\u003e\n  \u003cli\u003eCommon applications: winches, hatches, tarps, lift systems\u003c\/li\u003e\n  \u003cli\u003eWorks for both marine and land vehicle installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the electrical and mechanical connection details I need to know?\u003c\/h3\u003e\n\u003cp\u003eThe relay includes multiple stud sizes for secure terminal connections and requires matching ring terminals for installation. Properly sized wiring and ring terminals ensure safe current flow and minimize voltage drop during operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour M6 studs and two M5 studs for power and control connections\u003c\/li\u003e\n  \u003cli\u003ePrepare M5 and M6 ring terminals rated for the motor’s current\u003c\/li\u003e\n  \u003cli\u003eUse appropriate fusing and cable gauge for 50–80A operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does build quality affect performance and service life?\u003c\/h3\u003e\n\u003cp\u003eThe relay’s rust‑ and moisture‑resistant materials and brass studs reduce corrosion and electrical resistance over time. A sturdier assembly keeps contact surfaces stable, which improves switching reliability and lowers the chance of heat buildup or premature failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion‑resistant housing for marine or exposed environments\u003c\/li\u003e\n  \u003cli\u003eBrass studs for secure, low‑resistance terminations\u003c\/li\u003e\n  \u003cli\u003eEngineered for repeated directional switching under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: technicians, fleet managers and DIY installers who need a dependable 12V forward\/reverse relay for medium‑ to heavy‑duty motor systems will find this JURPLIX module a direct, rugged replacement for specified OEM parts. It’s aimed at users who require clear load ratings, solid connection options (M5 and M6 studs) and corrosion protection for installations on trucks, trailers, boats and industrial equipment. If you need a durable relay to restore or improve directional motor control while matching common replacement part numbers, this unit is designed for that purpose.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this relay work with 12V systems only?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it is designed for 12V DC systems and supports 80A intermittent, 50A continuous loads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which OEM numbers does it replace?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It replaces part numbers 5541100, 24452, ATP0110, K10746M and 13994.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55163096203607,"sku":"B0FHH8M2CZ","price":33.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-front-view-relay-module.jpg?v=1790341330"},{"product_id":"jurplix-piston-ring-grinder-manual-filing-tool-with-120-grit-carbide-wheel-hardened-steel-frame-replaceable-wheel","title":"JURPLIX Piston Ring Grinder Manual Filing Tool with 120-Grit Carbide Wheel — Hardened Steel Frame, Replaceable Wheel","description":"\u003cp\u003e\u003cstrong\u003eJURPLIX manual piston ring grinder is a hand-operated filing tool with a 120-grit carbide wheel designed to square and size piston ring ends for accurate ring gap control.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, no-power tool is built to dress, lap, and remove small amounts of material from piston ring ends so you can meet manufacturer end-gap tolerances and improve ring seating. Constructed with a hardened steel frame and a replaceable carbide grinding wheel, the grinder is suited for garage shops, mobile mechanics, and hobby engine builders who need precise, repeatable ring clearance adjustments without complex machinery.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tool achieve precise piston ring end gaps?\u003c\/h3\u003e\n\u003cp\u003eThe grinder uses a 120-grit carbide wheel mounted to a manual filing arm, allowing you to remove controlled amounts of metal from ring ends. The hardened frame keeps the wheel aligned for consistent contact and repeatable results across multiple rings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e120-grit carbide wheel for accurate material removal\u003c\/li\u003e\n  \u003cli\u003eRigid steel frame prevents wobble and uneven cuts\u003c\/li\u003e\n  \u003cli\u003eHand control lets you slow down for fine adjustments\u003c\/li\u003e\n  \u003cli\u003eReplaceable wheel for sustained precision over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat setup and steps are required to use the piston ring filer?\u003c\/h3\u003e\n\u003cp\u003eSetup is straightforward: secure the filer in a vise or on a flat surface, clamp the piston ring squarely, and rotate the wheel against the ring end while checking the gap. Work slowly and measure frequently to avoid over-grinding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClamp tool or ring to a stable surface\u003c\/li\u003e\n  \u003cli\u003eIndex ring so the cutting path is square to the end face\u003c\/li\u003e\n  \u003cli\u003eFile in short passes, measuring the end gap between passes\u003c\/li\u003e\n  \u003cli\u003eFinish with light passes until the specified gap is reached\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich components and materials make this grinder durable?\u003c\/h3\u003e\n\u003cp\u003eThe core structure is a hardened steel frame that resists bending and maintains alignment under pressure. The carbide grinding wheel holds an edge longer than standard abrasives, and it is replaceable to extend the tool’s working life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHardened steel frame for structural stability\u003c\/li\u003e\n  \u003cli\u003e120-grit carbide wheel for long-lasting abrasive performance\u003c\/li\u003e\n  \u003cli\u003eReplace part numbers 66785 and 66786 compatible\u003c\/li\u003e\n  \u003cli\u003eCompact design for easy storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this tool fit into a workshop routine?\u003c\/h3\u003e\n\u003cp\u003eBecause it requires no electricity, the filer is portable and useful for field repairs or small shops without bench grinders. It speeds up prep work during engine rebuilds and reduces the need to ship rings out for professional reworking.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManual operation — no power source needed\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight for mobile mechanics\u003c\/li\u003e\n  \u003cli\u003eUse during rebuilds to get rings within spec before installation\u003c\/li\u003e\n  \u003cli\u003eEasy to swap wheels for different grit or replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The JURPLIX Manual Piston Ring Grinder is aimed at engine hobbyists, home mechanics, small machine shops, and mobile technicians who need a reliable, portable way to adjust piston ring end gaps. It’s appropriate for anyone who wants accurate, repeatable ring clearance control without investing in larger powered equipment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the grinding wheel replaceable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 120-grit carbide wheel is replaceable and extends tool life.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need power to use this filer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It is fully manual and works without electricity for field or shop use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55165689594199,"sku":"B0F915J887","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-front-view-manual-piston-ring-grinder.jpg?v=1790357228"},{"product_id":"jurplix-6-trailer-jack-block-6in-rv-leveling-stabilizing-pad-with-carry-bag-10-000-lb-capacity","title":"JURPLIX 6\" Trailer Jack Block – 6in RV Leveling \u0026 Stabilizing Pad with Carry Bag, 10,000 lb Capacity","description":"\u003cp\u003e\u003cstrong\u003eJURPLIX Trailer Jack Block is a rugged 6-inch RV leveling and stabilizing pad that lifts and supports trailer jacks, tongue posts, scissor jacks and 5th wheel feet for safer, faster setup on uneven or soft ground.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eLightweight yet heavy-duty, this single JURPLIX jack block offers a 6\" increase in height to reduce jack travel and improve campsite leveling. Molded from weather-resistant material with internal ribbing, it resists cracking and sinking under loads up to 10,000 lbs. The block arrives with a tough storage bag for tidy transport and features anti-slip surfaces, drainage channels and carry holes to make placement and removal simple during trips.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this jack block make leveling an RV easier?\u003c\/h3\u003e\n\u003cp\u003eThe added 6-inch lift reduces the amount your jack needs to extend, speeding up leveling while increasing stability. The wide base and textured top prevent the jack foot from slipping, especially on gravel, dirt or soft grass.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" height reduces jack extension and saves setup time\u003c\/li\u003e\n  \u003cli\u003eTextured surface keeps jack feet from shifting\u003c\/li\u003e\n  \u003cli\u003eBroad footprint distributes weight to avoid sinking\u003c\/li\u003e\n  \u003cli\u003eWorks on uneven campsites, gravel and soft terrain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this block hold heavy trailers without cracking or sinking?\u003c\/h3\u003e\n\u003cp\u003eYes — the JURPLIX block is engineered for high load capacity and outdoor use. Reinforced hollow construction with internal ribs provides strength while keeping the unit lightweight; materials resist UV, moisture and repeated pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated to support up to 10,000 lbs under normal conditions\u003c\/li\u003e\n  \u003cli\u003eReinforced internal ribbing for improved load distribution\u003c\/li\u003e\n  \u003cli\u003eWeather-resistant polymer resists UV degradation and water damage\u003c\/li\u003e\n  \u003cli\u003eDrainage design prevents water pooling that could weaken footing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes it fit different jack foot shapes and trailer types?\u003c\/h3\u003e\n\u003cp\u003eThe block’s top cavity and wide base accept round and square jack feet, scissor jacks, tongue posts and many 5th wheel stabilizers. Its universal shape and side grip holes make accurate placement easy for a variety of trailer and motorhome configurations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with round or square jack feet and post-style supports\u003c\/li\u003e\n  \u003cli\u003eWorks with travel trailers, campers, 5th wheels and motorhomes\u003c\/li\u003e\n  \u003cli\u003eSide grip holes help align the jack foot quickly and safely\u003c\/li\u003e\n  \u003cli\u003eSingle-pack option for targeted lift where you need it most\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The JURPLIX 6\" Trailer Jack Block is made for RV owners, weekend campers, road-trippers and anyone who needs a dependable, portable solution for leveling and stabilizing trailers on uneven, soft or loose surfaces. It’s especially useful for single-jack setups, occasional boondocking, and travelers who want a compact, durable pad that stores easily in a carry bag.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What jack types will this block work with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits most round and square jack feet, scissor jacks, tongue posts and many 5th wheel stabilizers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much weight can the block support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The block is built to support up to 10,000 lbs under normal outdoor conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55166137991511,"sku":"B0GDFTC46F","price":58.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-front-view-packaging.jpg?v=1790364083"},{"product_id":"jurplix-adjustable-oil-filter-wrench-set-2pcs-60-105-mm-auto-clamp-spring-1-2-drive","title":"JURPLIX Adjustable Oil Filter Wrench Set 2PCS 60–105 mm — Auto-Clamp Spring, 1\/2\" Drive","description":"\u003cp\u003e\u003cstrong\u003eThe JURPLIX 2PCS Universal Adjustable Oil Filter Wrench Set is a pair of spring-auto-clamp, non-slip jaw tools that remove and install most spin-on oil filters from 60–105 mm with a 1\/2\" drive connection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis two-piece kit delivers a versatile solution for home mechanics and professional shops who need reliable grip and leverage on a wide range of filter sizes. Each wrench features a self-tightening spring mechanism and serrated jaws to bite into oily or rusted canisters, while heat-treated carbon steel construction and a corrosion-resistant finish extend service life. The set covers small motorcycle and car filters through larger truck and light commercial units, enabling quick one-handed removal even in confined engine bays.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these wrenches adapt to different filter sizes?\u003c\/h3\u003e\n\u003cp\u003eThe set includes two adjustable caps sized 60–80 mm and 80–105 mm so you can match the tool to common spin-on filter diameters. A built-in spring causes the jaws to clamp tighter as torque increases, accommodating slightly out-of-round or dented filters without slipping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCovers 60–80 mm (2-3\/8\" to 3-1\/8\") and 80–105 mm (3-1\/8\" to 4-1\/8\").\u003c\/li\u003e\n  \u003cli\u003eAuto-clamp spring tightens grip under load for one-handed use.\u003c\/li\u003e\n  \u003cli\u003eSerrated jaws engage oily surfaces and corroded edges securely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these work with my ratchet or wrench?\u003c\/h3\u003e\n\u003cp\u003eEach cap accepts a standard 1\/2\" drive so you can attach a ratchet or breaker bar for high leverage. The smooth interface also lets you use a 22 mm wrench on many units, making the set compatible with common garage tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/2\" square drive socket-ready for ratchets and torque tools.\u003c\/li\u003e\n  \u003cli\u003eCan be paired with a 22 mm wrench when needed for hand control.\u003c\/li\u003e\n  \u003cli\u003eDesigned for tight engine compartments where space is limited.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe are the wrenches under heavy use?\u003c\/h3\u003e\n\u003cp\u003eManufactured from heat-treated carbon steel with an anti-corrosion coating, these wrenches resist wear from repeated use and exposure to oil and grime. The serrated, non-slip jaws reduce rounding and crushing of filters, while the spring-assisted clamp lowers the chance of sudden slippage during removal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated carbon steel for strength and long life.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finish protects against rust and oil exposure.\u003c\/li\u003e\n  \u003cli\u003eJaw design minimizes filter damage and improves safety under torque.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat types of vehicles benefit most from this set?\u003c\/h3\u003e\n\u003cp\u003eThe adjustable sizes make this kit applicable to a broad range of vehicles, from motorcycles and compact cars to full-size trucks and light commercial equipment. It’s a practical choice for routine oil changes, rapid roadside repairs, and professional shop workflows where varying filter diameters appear frequently.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits most passenger cars, SUVs, motorcycles, trucks, and light commercial vehicles.\u003c\/li\u003e\n  \u003cli\u003eUseful for DIYers, fleet maintenance, and professional mechanics.\u003c\/li\u003e\n  \u003cli\u003eCompact design fits tight spaces around engine assemblies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: If you change oil regularly, maintain multiple vehicle types, or need a dependable tool to remove stubborn spin-on filters without distortion, the JURPLIX 2PCS Universal Adjustable Oil Filter Wrench Set is built for you. It suits backyard mechanics who want professional-grade durability and shop technicians who require fast, slip-resistant operation across common filter sizes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What filter sizes do these wrenches cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The set fits 60–80 mm and 80–105 mm spin-on filters, covering most passenger and light commercial filters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these with my ratchet?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, each wrench accepts a 1\/2\" drive for ratchets and breaker bars; a 22 mm wrench also works in many situations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55167621071191,"sku":"B0G2BW579D","price":61.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-front-packaging-and-tools.jpg?v=1790389733"},{"product_id":"jurplix-trailer-wiring-harness-connector-7-4-pin-dual-socket-with-mounting-bracket-and-copper-terminals","title":"JURPLIX Trailer Wiring Harness Connector — 7 \u0026 4‑Pin Dual Socket with Mounting Bracket and Copper Terminals","description":"\u003cp\u003e\u003cstrong\u003eJURPLIX 7 \u0026amp; 4 Pin Trailer Wiring Harness Connector is a combined 7-way blade and 4-way flat receptacle assembly with bracketed mounting hardware for reliable trailer electrical connections on pickup trucks and tow vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned to give you a compact, ready-to-install towing receptacle, this JURPLIX dual-socket assembly consolidates common trailer connections into a single, heavy-duty unit. It fits standard USCAR sockets and arrives with a metal mounting bracket and hardware, so you can secure the connector to your tow hitch or bumper without extensive rewiring. The assembly uses copper terminals to improve conductivity and reduce heating under load, making it suitable for lighting, turn signals, and auxiliary power circuits used by most light- and medium-duty trailers.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this dual-socket connector simplify hooking up trailers?\u003c\/h3\u003e\n\n\u003cp\u003eThe combined 7-way and 4-way design lets you accept either blade-style or flat-style trailer plugs without swapping adapters constantly. Although both sockets cannot be used simultaneously, having both options on one plate removes the need to keep separate adapters or change connectors when switching trailers. The included bracket keeps the connector stable so plugs align easily every time.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOne assembly supports 7-way blade and 4-way flat plugs for two common trailer types.\u003c\/li\u003e\n  \u003cli\u003eMounting bracket and hardware provided for secure, vibration-resistant installation.\u003c\/li\u003e\n  \u003cli\u003eWorks with standard USCAR sockets for plug-and-play compatibility.\u003c\/li\u003e\n  \u003cli\u003eCopper terminals reduce resistance and heat for consistent electrical contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill installation require cutting or splicing my vehicle wiring?\u003c\/h3\u003e\n\n\u003cp\u003eThis JURPLIX unit is built for straightforward installation with USCAR-compatible devices so most setups avoid cutting or splicing factory wiring. The harness mate-in options and preconfigured terminals let installers or technicians connect quickly. If your vehicle uses a different connector standard you may need a short adapter or minor wiring changes, but typical pickup truck harnesses are compatible.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned for plug-and-play compatibility with standard USCAR sockets.\u003c\/li\u003e\n  \u003cli\u003eNo extensive wiring or soldering required in most installations.\u003c\/li\u003e\n  \u003cli\u003eMounting hardware included to minimize additional parts or mods.\u003c\/li\u003e\n  \u003cli\u003eAdapters available separately if vehicle connector differs from USCAR standard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and design features improve durability and electrical reliability?\u003c\/h3\u003e\n\n\u003cp\u003eThe connector uses premium copper terminals to lower electrical resistance and limit heat buildup during heavy or prolonged use. The receptacle housing and mating surfaces are made to withstand outdoor exposure and vibration, while the heavy-duty metal bracket keeps the connector firmly anchored to the vehicle frame. These elements together reduce the chance of loose contacts and intermittent faults under towing conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-quality copper terminals for enhanced conductivity and reduced heat.\u003c\/li\u003e\n  \u003cli\u003eReinforced metal mounting bracket to resist vibration and loosening.\u003c\/li\u003e\n  \u003cli\u003eWeather-resistant connector housing for outdoor use.\u003c\/li\u003e\n  \u003cli\u003eSecure hardware included to ensure stable, long-lasting attachment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich trailer functions does this assembly support?\u003c\/h3\u003e\n\n\u003cp\u003eThe JURPLIX connector routes the standard circuits used on trailers: tail\/marker lights, turn signals, brake lights, ground, and auxiliary or battery power where available on 7-pin setups. The 4-way flat socket supports essential lighting and signals for trailers that don’t require brake or auxiliary power. This makes the assembly suitable for a broad range of towing tasks while keeping wiring organized at the hitch.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e7-way blade supports brake lights, turn signals, tail lights, ground, and auxiliary circuits.\u003c\/li\u003e\n  \u003cli\u003e4-way flat handles tail\/marker lights and turn signals for simpler trailers.\u003c\/li\u003e\n  \u003cli\u003eStable power transfer reduces flicker and intermittent light issues.\u003c\/li\u003e\n  \u003cli\u003eBoth sockets available on one plate for quick trailer changes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The JURPLIX 7 \u0026amp; 4 Pin Trailer Wiring Harness Connector is aimed at pickup owners, fleet operators, and DIY installers who tow different trailers and want a single, durable receptacle on their hitch. It suits those who need quick compatibility with both blade and flat trailer plugs, prefer a bracketed, hardware-included solution, and value improved conductivity and secure mounting over cheap, loose fittings. If you tow frequently, swap trailers often, or are fitting a new hitch wiring solution, this assembly offers a practical, long-lasting option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use both the 7-way and 4-way sockets at the same time?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The assembly supports either the 7-way blade or the 4-way flat plug, but not both simultaneously.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include mounting hardware and a bracket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes a reinforced metal mounting bracket and the necessary hardware for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55167873057111,"sku":"B0G41Q1Z5Q","price":46.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-front-view-dual-socket-assembly.jpg?v=1790394544"},{"product_id":"jurplix-crank-handle-recoil-starter-for-200cc-6-5hp-engines-smooth-starts-easy-bolt-on-fit-with-extra-bolts","title":"JURPLIX Crank-Handle Recoil Starter for 200cc \/ 6.5HP Engines — Smooth Starts, Easy Bolt-On Fit with Extra Bolts","description":"\u003cp\u003e\u003cstrong\u003eJURPLIX Easy Quick Fast Pull Start is a crank-handle recoil starter that replaces fragile pull-cords to deliver smoother, more controlled engine starting for Predator 212, Coleman CT200U, KT196 go-kart, Honda GX160 and similar 200cc engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact replacement starter swaps in for worn or weak pull-cord assemblies to make cold starts faster and less jarring. Built from heat-resistant metals and engineered components, the unit installs in minutes on the original blower housing and uses a crank-handle mechanism to reduce sudden jerks and bounce that strain the operator and the engine components. It’s supplied with extra fasteners and carries a 12-month guarantee after factory inspection.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this crank-handle starter differ from a traditional pull-cord?\u003c\/h3\u003e\n\u003cp\u003eThe JURPLIX design replaces a rope pull with an integrated crank handle and improved recoil mechanism for a controlled, linear pull that minimizes abrupt motion. That gentler action lowers the chance of wrist and shoulder strain while delivering consistent engagement with the flywheel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCrank-handle starting eliminates sudden jerks and bounce\u003c\/li\u003e\n  \u003cli\u003eSmoother engagement protects starter dogs and flywheel\u003c\/li\u003e\n  \u003cli\u003eMaterials withstand high temperatures and repeated use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my engine — what models are compatible?\u003c\/h3\u003e\n\u003cp\u003eThis starter is designed to be a direct-fit replacement for a range of popular small engines and mini-vehicle applications. It fits Predator 212, Coleman CT200U and B200R 200cc mini bikes, KT196 go-karts, Honda 6.5HP GX160, 196 Hisun engines and other machines with matching blower-housing bolt patterns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Predator 212 and Coleman CT200U\/B200R 200cc\u003c\/li\u003e\n  \u003cli\u003eWorks with KT196 go-kart and Honda 6.5HP GX160 engines\u003c\/li\u003e\n  \u003cli\u003eIncludes spare bolts for reinforced mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and intended for hobbyists and home mechanics: remove the old assembly and bolt the new starter onto the existing steel blower housing. No advanced tools or machining are required, and the kit contains extra fasteners for a secure fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAttaches to original blower housing with three bolts\u003c\/li\u003e\n  \u003cli\u003eSix bolts included to replace or reinforce mounting\u003c\/li\u003e\n  \u003cli\u003eNo special skills or modifications required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this replacement starter and what warranty is offered?\u003c\/h3\u003e\n\u003cp\u003eThe JURPLIX starter uses robust, wear-resistant components designed to handle repeated use and elevated temperatures common near engine housings. Each unit is quality inspected before shipping and comes with a 12-month satisfaction guarantee to cover manufacturing defects or early failures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-temperature and wear-resistant materials\u003c\/li\u003e\n  \u003cli\u003eBuilt for long-term use with reduced replacement frequency\u003c\/li\u003e\n  \u003cli\u003e12-month guarantee after strict inspection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The JURPLIX Easy Quick Fast Pull Start suits DIY mechanics, mini-bike and go-kart owners, rental fleets, landscapers and anyone with a Predator 212, Coleman CT200U\/B200R, KT196 or Honda GX160-class engine who wants a more reliable, less fatiguing starting method. Choose this starter if you need an easy-to-install, durable upgrade that reduces jerking at startup and comes with spare fasteners and a one-year guarantee.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter fit Honda GX160 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it is compatible with Honda 6.5HP GX160 and similar 196-class engines with matching blower-housing bolt patterns.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are extra bolts included for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes six bolts (three required plus three spares) for secure or reinforced mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55168326631767,"sku":"B0FDQGCY16","price":64.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-starter-front-assembly.jpg?v=1790400226"},{"product_id":"jurplix-diesel-auxiliary-fuel-tank-installation-kit-11025-gravity-fed-fits-3-4-1-ton-trucks","title":"JURPLIX Diesel Auxiliary Fuel Tank Installation Kit 11025 — Gravity-Fed, Fits 3\/4- \u0026 1-Ton Trucks","description":"\u003cp\u003e\u003cstrong\u003eJURPLIX 11025 Diesel Installation Kit is a complete gravity-fed auxiliary fuel tank install kit engineered to link an auxiliary tank to your factory diesel system for steady fuel transfer and simplified refills.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you drive a heavy-duty diesel pickup and need extended range or a secondary fuel reservoir, this JURPLIX kit provides the fittings, hose, and hardware necessary to plumb an auxiliary tank into the factory fuel fill\/drain arrangement. Designed to work with many 3\/4-ton and 1-ton trucks from Dodge, Ford, Chevy and GMC, the kit focuses on durable materials and straightforward assembly so you can add capacity without extensive modifications.\u003c\/p\u003e\n\n\u003ch3\u003eWhich truck models and years will this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe JURPLIX 11025 kit covers a broad set of diesel pickups across three major manufacturers. Always verify your truck’s drain fitting size and model year before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDodge Ram 2500\/3500: 1999–2012\u003c\/li\u003e\n  \u003cli\u003eFord F-250\/F-350 Super Duty: 1999–2022\u003c\/li\u003e\n  \u003cli\u003eChevrolet Silverado 2500\/3500 HD: 2011–2022\u003c\/li\u003e\n  \u003cli\u003eGMC Sierra 2500\/3500 HD: 2011–2022\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included, and how do they help the installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships as a complete set so you get every primary part needed to establish the auxiliary-to-factory fuel connection and secure it in place. Components are sized for a 3\/8-inch female pipe-thread drain fitting and intended for gravity-fed operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFuel hose — fuel transfer line from aux tank to factory tank\u003c\/li\u003e\n  \u003cli\u003eShut-off valve — lets you stop flow for maintenance or storage\u003c\/li\u003e\n  \u003cli\u003eRoll-over valve — prevents fuel spillage during overturn or steep angles\u003c\/li\u003e\n  \u003cli\u003eAluminum tee — durable branching fitting for stable connections\u003c\/li\u003e\n  \u003cli\u003ePTFE tape — thread sealant for leak-free joints\u003c\/li\u003e\n  \u003cli\u003eRubber hose sleeves, hose clamps, cable ties — protect hose, secure fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the gravity-fed design work and what are the practical benefits?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses gravity to move diesel from the auxiliary tank into the factory tank when the auxiliary is mounted higher or when venting and shut-off settings allow flow. This approach avoids pumps and electronics for a simpler, lower-maintenance system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteady flow without electrical components\u003c\/li\u003e\n  \u003cli\u003eFewer failure points compared with pump-fed setups\u003c\/li\u003e\n  \u003cli\u003eReduces the need for constant top-offs on long trips\u003c\/li\u003e\n  \u003cli\u003eRoll-over and shut-off valves add safety and control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build quality should I expect?\u003c\/h3\u003e\n\u003cp\u003eJURPLIX designed this kit using corrosion-resistant aluminum fittings and durable rubber hose materials to withstand fuel exposure and road conditions. Parts meet or exceed typical OEM standards for aftermarket auxiliary fuel connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum tee resists rust and handles fuel line stress\u003c\/li\u003e\n  \u003cli\u003eRubber hose rated for fuel service and flexible routing\u003c\/li\u003e\n  \u003cli\u003eSturdy clamps and sleeves protect against chafing and leaks\u003c\/li\u003e\n  \u003cli\u003ePTFE tape ensures tight threaded seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The JURPLIX 11025 Diesel Installation Kit suits truck owners who need extra diesel capacity without complex electrical pumps — fleet operators, overland travelers, contractors and rural drivers who value straightforward gravity-fed operation. If your vehicle matches the listed fitments and you have a 3\/8-inch female pipe-thread drain fitting, this kit gives the hardware and safeguards (shut-off and roll-over valves) needed to add an auxiliary tank quickly and reliably. Before installation, confirm your model year compatibility and close factory fuel valves; consult a qualified mechanic if you’re unsure about fuel-system work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit work with my 2015 Ford F-350 Super Duty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the JURPLIX 11025 supports Ford F-250\/F-350 Super Duty models from 1999–2022; verify your drain fitting is a 3\/8-inch female pipe thread.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include a pump for transferring diesel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — it uses gravity-fed transfer; the kit includes hose, valves and fittings but no electric pump.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55168427393367,"sku":"B0GCR2NNW9","price":47.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-11025-front-packaging.jpg?v=1790403663"},{"product_id":"jurplix-water-pump-impeller-kit-for-yamaha-150-300-hp-outboards-complete-rebuild-kit-upgraded-components","title":"JURPLIX Water Pump Impeller Kit for Yamaha 150-300 HP Outboards — Complete Rebuild Kit, Upgraded Components","description":"\u003cp\u003e\u003cstrong\u003eJURPLIX 61AW0078 is a complete water pump impeller kit designed to restore reliable cooling for compatible Yamaha 2‑ and 4‑stroke outboard engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit supplies everything needed to rebuild the lower unit water pump on a range of Yamaha outboards so you can prevent overheating and maintain peak engine performance. Built with upgraded components and factory‑style fitment, the kit matches several OE part numbers and includes impeller, housing, wear components, fasteners, and seals for a straightforward replacement job.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Yamaha engines will this impeller kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe JURPLIX 61AW0078 kit fits many Yamaha outboards across both 2‑stroke and 4‑stroke families from mid‑range to high horsepower. It corresponds to a number of original equipment numbers, so it’s suitable for direct replacement in matched models when cross‑referenced.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Yamaha 150, 175, 200, 225, 250 and 300 HP models (2‑stroke and 4‑stroke)\u003c\/li\u003e\n  \u003cli\u003eCross references OE numbers like 61A‑W0078 and 64L‑W0078 series\u003c\/li\u003e\n  \u003cli\u003eAlso replaces aftermarket references such as Sierra 18‑3396‑1 and Mallory 9‑48618\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included and why that matters?\u003c\/h3\u003e\n\u003cp\u003eThis is a full rebuild kit delivering every part required to service the pump assembly. Having all pieces in one box reduces downtime and ensures compatibility between the impeller and its mating components, which helps maintain proper water flow and seal integrity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne molded rubber impeller sized for the listed applications\u003c\/li\u003e\n  \u003cli\u003eImpeller housing, insert cup, and wear plate to restore clearances\u003c\/li\u003e\n  \u003cli\u003eKey, gasket, two pins, two O‑rings, plus four bolts and washers for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this replacement compared with OEM parts?\u003c\/h3\u003e\n\u003cp\u003eJURPLIX uses upgraded materials and subjects parts to quality checks to extend service life in marine conditions. While actual lifespan depends on use and water quality, the kit is engineered to offer consistent performance and resist premature wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpgraded rubber and metal components for enhanced abrasion resistance\u003c\/li\u003e\n  \u003cli\u003eQuality control testing to ensure fit and function before shipping\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand salt and freshwater operating environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I service the water pump impeller?\u003c\/h3\u003e\n\u003cp\u003eRegular inspection and timely replacement of the impeller are essential to avoiding cooling failures. Routine checks each season and planned replacement every 2–3 seasons are common guidance, but inspect more frequently if you boat in silty or debris‑filled water.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect the impeller annually or at season start for cracks or missing vanes\u003c\/li\u003e\n  \u003cli\u003eReplace every 2–3 seasons, sooner in harsh conditions\u003c\/li\u003e\n  \u003cli\u003eVerify compatibility with your engine’s OE numbers before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The JURPLIX 61AW0078 Water Pump Impeller Kit is intended for boat owners, marine mechanics, and service shops that maintain Yamaha 150–300 HP outboards and want a single, ready‑to‑install kit with upgraded parts. It’s a practical choice for anyone replacing a worn pump to restore reliable cooling, avoid overheating, and keep their outboard running efficiently during recreational or professional use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit my Yamaha 200 HP outboard?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit lists compatibility with Yamaha 200 HP models; confirm by matching your engine’s OE part number first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are all installation parts included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes impeller, housing, wear plate, gasket, key, pins, O‑rings, bolts and washers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55168487915863,"sku":"B0DX1WN46N","price":55.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-front-packaging-61aw0078.jpg?v=1790405353"},{"product_id":"jurplix-crank-handle-recoil-starter-for-predator-212-honda-gx160-200cc-6-5hp-replacement-heat-resistant-durable-design","title":"JURPLIX crank-handle recoil starter for Predator 212 \u0026 Honda GX160 — 200cc\/6.5HP replacement, heat-resistant durable design","description":"\u003cp\u003e\u003cstrong\u003eJURPLIX Easy Quick Fast Pull is a crank-handle recoil starter designed to replace traditional pull-cord assemblies for small engines, delivering smoother, safer starts for Predator 212, Coleman CT200U, KT196, Honda GX160 and similar 200cc\/196\/6.5HP engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact recoil starter swaps in for worn or inefficient pull-cord units on mini bikes, go-karts and small engine applications. It uses an upgraded crank-handle mechanism to reduce sudden jerks and rebound, is built from heat-resistant materials for durability, and installs using the original blower housing mounting points. The unit ships with extra bolts and a 12-month guarantee for peace of mind.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the crank-handle design change starting performance?\u003c\/h3\u003e\n\u003cp\u003eThe crank-handle converts the traditional straight pull into a controlled rotational start, which minimizes the snap-back and jolt common with rope starters. That smoother action reduces user fatigue and lowers the chance of accidental rebound or loss of grip.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eControlled rotational crank replaces sharp pull motion\u003c\/li\u003e\n  \u003cli\u003eLess physical strain on wrist and shoulder during repeated starts\u003c\/li\u003e\n  \u003cli\u003eReduced rope wear and fewer sudden returns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich engines and machines will this starter fit?\u003c\/h3\u003e\n\u003cp\u003eJURPLIX Easy Quick Fast Pull is built to be compatible with a range of small engines and recreational machines. It fits Predator 212, Coleman CT200U B200R 200cc mini bikes, KT196 go-karts, Honda 6.5HP GX160 and 196 Hisun engines when bolted to the original blower housing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with common 200cc and 6.5HP small engines\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for many Predator, Coleman, KT and Honda models\u003c\/li\u003e\n  \u003cli\u003eUses factory mounting pattern and requires no engine modification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build quality should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe assembly is manufactured from durable, heat-resistant components designed for repeated use in high-temperature engine bays. Reinforced parts and corrosion-resistant fasteners extend service life and reduce the need for frequent replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength materials resist wear and heat exposure\u003c\/li\u003e\n  \u003cli\u003eQuality bearings and springs for consistent retraction\u003c\/li\u003e\n  \u003cli\u003eExtra bolts included for secure attachment and longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what hardware is included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and requires only basic hand tools. The starter mounts to the original steel blower housing using the supplied bolts—no special skills, cutting or drilling is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounts using original blower housing bolt pattern\u003c\/li\u003e\n  \u003cli\u003eIncludes six bolts (three needed, three spares for backup or reinforcement)\u003c\/li\u003e\n  \u003cli\u003eTypical install time: short; basic wrench\/socket set required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The JURPLIX Easy Quick Fast Pull Recoil Starter is ideal for hobbyists, mini bike and go-kart owners, and light-equipment users who want a more reliable, less jarring starting method. It suits anyone replacing a worn rope starter or upgrading to a crank-handle assembly for smoother, safer starts on common small engines. Keep in mind that this is a mechanical replacement part; if your engine has nonstandard mounting or custom housings, verify dimensions before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this starter fit my Predator 212 engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It's designed to be compatible with Predator 212 engines that use the standard blower housing mounting pattern.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required—basic hand tools like a wrench or socket set are sufficient for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55168506200407,"sku":"B0FDQCMZSL","price":77.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-front-assembly-starter.jpg?v=1790405968"},{"product_id":"jurplix-rv-propane-regulator-2-stage-auto-changeover-dual-18in-stainless-braided-hoses-glow-gauge","title":"JURPLIX RV Propane Regulator 2-Stage Auto Changeover Dual 18in Stainless Braided Hoses \u0026 Glow Gauge","description":"\u003cp\u003e\u003cstrong\u003eThe JURPLIX RV 2-Stage Auto Changeover LP Propane Regulator is a dual-tank automatic switch system with stainless braided 18\" pigtails and an integrated glow-in-the-dark gauge for continuous propane delivery on RVs and trailers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep hot water, heat, and cooking power flowing by using a regulator designed to automatically swap between two propane cylinders and clearly show tank pressure. Built for outdoor vehicle use, this two-stage regulator balances steady output with durable materials—stainless braided hoses, brass fittings, and CSA-certified components—so you can rely on it while traveling or parked.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the auto changeover feature prevent interruptions?\u003c\/h3\u003e\n\u003cp\u003eThe regulator monitors both tanks and automatically switches to the reserve cylinder when the primary tank runs low, avoiding sudden loss of fuel to appliances. Visual indicators make it simple to tell tank status at a glance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomatic switching between primary and reserve tanks when pressure drops\u003c\/li\u003e\n  \u003cli\u003eRed indicator for empty\/off tank and green for normal operation\u003c\/li\u003e\n  \u003cli\u003eContinuous fuel supply for appliances—no manual tank swapping required\u003c\/li\u003e\n  \u003cli\u003e2-stage regulation for steady downstream pressure to devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the performance specs and connection types?\u003c\/h3\u003e\n\u003cp\u003eThis regulator supports high-capacity flow with distinct ratings for primary and reserve cylinders and uses standard RV fittings for broad compatibility. The included fittings and outlets let you integrate the regulator into most RV propane systems without specialty adapters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrimary cylinder capacity: 210,000 BTU\/hr; reserve cylinder: 130,000 BTU\/hr\u003c\/li\u003e\n  \u003cli\u003eInlets: QCC1 1\/4\" SAE inverted flare; outlet: 3\/8\" female NPT\u003c\/li\u003e\n  \u003cli\u003e18\" pigtail hoses with 1\/4\" male quick-disconnect plugs and QCC1 fittings\u003c\/li\u003e\n  \u003cli\u003eIncludes 3\/8\" NPT male \u0026amp; male flare adapters for easy hookup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is the regulator for outdoor RV use?\u003c\/h3\u003e\n\u003cp\u003eMaterials and certifications are selected for corrosion resistance, leak prevention, and reliable outdoor performance on motorhomes and trailers. A glow-in-the-dark pressure gauge adds convenience for low-light checks and leak detection without removing tanks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel braided hoses and solid brass fittings resist rust and corrosion\u003c\/li\u003e\n  \u003cli\u003eGlow-in-the-dark propane tank pressure gauge for nighttime visibility\u003c\/li\u003e\n  \u003cli\u003eCSA-certified components suitable for outdoor vehicle installations\u003c\/li\u003e\n  \u003cli\u003eComes with roll sealing tape, wrench, screws and mounting bracket for secure fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and where will it work?\u003c\/h3\u003e\n\u003cp\u003eThe kit is assembled as a ready-to-install solution for dual-tank RV systems and includes mounting hardware and hose assemblies so you can complete the swap quickly. It fits most motorhomes, campers, trailers and outdoor propane applications where a managed dual-tank supply is desired.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: 2-stage auto changeover regulator, two 18\" pigtail hoses with gauge, 3\/8\" NPT male \u0026amp; male flare, sealing tape, wrench, 4 screws, and a regulator bracket\u003c\/li\u003e\n  \u003cli\u003eDesigned for RVs, campers, travel trailers, vans, and many outdoor propane appliances\u003c\/li\u003e\n  \u003cli\u003eWorks with standard QCC1 fittings and common RV plumbing connections\u003c\/li\u003e\n  \u003cli\u003eEasy replacement or upgrade for existing dual-tank regulator setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The JURPLIX RV 2-Stage Auto Changeover LP Propane Regulator is ideal for RV owners, full-time travelers, and weekend campers who need uninterrupted propane supply and clear tank monitoring. It suits anyone replacing a worn regulator, upgrading to automatic switching, or outfitting a dual-tank system in motorhomes, trailers, vans, and portable outdoor cooking setups.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this regulator myself on my RV?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes hoses, adapters, mounting bracket and a wrench for DIY installation, but follow safety guidelines or consult a technician if unsure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it work with standard RV propane tanks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The regulator uses common QCC1 fittings and a 3\/8\" female NPT outlet, compatible with most RV dual-tank systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55168998768983,"sku":"B0G5LDR2WR","price":72.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-front-view-regulator-assembly.jpg?v=1790416693"},{"product_id":"jurplix-led-sequential-side-mirror-marker-lights-for-ford-f-150-super-duty-clear-lens-white-drl-amber-sequential-pair","title":"JURPLIX LED Sequential Side Mirror Marker Lights for Ford F-150 \u0026 Super Duty — Clear Lens, White DRL + Amber Sequential (Pair)","description":"\u003cp\u003e\u003cstrong\u003eThese JURPLIX LED sequential side mirror marker lights are a direct-fit pair of clear-lens replacements that provide white parking\/DRL illumination and amber sequential turn signals for compatible Ford F-150 and Super Duty trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Ford F-150 (2015–2023) or Super Duty (F-250\/F-350\/F-450\/F-550, 2017–2023) has worn, cracked, or non-functioning mirror marker lights, these JURPLIX units swap in without cutting or drilling. They match the factory 4-pin connector and preserve parking light, daytime running light, and turn-signal functions while giving a brighter, modern look with a clear lens and sequential amber animation.\u003c\/p\u003e\n\n\u003ch3\u003eWill these mirror marker lights fit my truck?\u003c\/h3\u003e\n\u003cp\u003eFitment targets specific Ford models: F-150 2015–2023 and Super Duty F-250\/F-350\/F-450\/F-550 2017–2023. They use the original 4-pin connector and the listed OEM part numbers to ensure direct compatibility. Trucks fitted with a 3-pin connector forgo the parking\/DRL function and are not compatible.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Ford F-150 (2015–2023)\u003c\/li\u003e\n  \u003cli\u003eCompatible Super Duty: F-250\/F-350\/F-450\/F-550 (2017–2023)\u003c\/li\u003e\n  \u003cli\u003eOEM part numbers: HC3Z-13B374-A, HC3Z-13B375-A, FL3Z-13B374-CA, FL3Z-13B375-CA, FL3Z-13B374-CC, FL3Z-13B375-CC\u003c\/li\u003e\n  \u003cli\u003eRequires factory 4-pin mirror harness (not for 3-pin setups)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the lighting modes work and what looks will I get?\u003c\/h3\u003e\n\u003cp\u003eEach unit delivers two color modes: crisp white for parking lights and daytime running lights, plus amber for sequential turn signaling. The sequential amber pattern provides a clear, flowing signal that increases visibility to other drivers while the white DRL\/parking output enhances front-side presence.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWhite mode: parking lights and daytime running lights\u003c\/li\u003e\n  \u003cli\u003eAmber mode: dynamic sequential turn signal animation\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play preserves factory lighting behavior\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these mirror lights durable and weatherproof?\u003c\/h3\u003e\n\u003cp\u003eJURPLIX designs these marker lights for real-world road conditions with IP-style protection against water and dust, plus shock resistance. The housing uses lightweight ABS and the clear lenses are impact-resistant polycarbonate for extended service life—rated for more than 50,000 hours of LED operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWeather-sealed construction resists rain and road spray\u003c\/li\u003e\n  \u003cli\u003eDustproof and shockproof for rugged use\u003c\/li\u003e\n  \u003cli\u003eABS housing with impact-resistant PC lens for longevity\u003c\/li\u003e\n  \u003cli\u003eLED lifespan: 50,000+ hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what comes in the box?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: remove the original mirror marker light and plug the JURPLIX unit into the factory 4-pin connector—no cutting, drilling, or splicing required. The kit includes both left and right mirror lights and plug-in connectors so you have a complete, ready-to-install replacement set.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes a pair of sequential LED mirror marker lights (driver and passenger)\u003c\/li\u003e\n  \u003cli\u003ePlug-in connectors for direct replacement\u003c\/li\u003e\n  \u003cli\u003eDOT and SAE approved for on-road use\u003c\/li\u003e\n  \u003cli\u003eNo modification: true bolt-and-plug swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This JURPLIX LED sequential side mirror marker light set is aimed at Ford truck owners who want a factory-style upgrade that restores or improves mirror-side visibility. It's a good match for drivers replacing damaged lens assemblies, modernizing older mirror lights, or enhancing nighttime and signaling visibility without changing wiring or mirror assemblies. If your vehicle uses the factory 4-pin mirror connector and you want dependable, weatherproof LEDs with sequential amber signaling, this kit provides a direct-fit, DOT-compliant solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my 2018 Ford F-150 mirror?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your 2018 F-150 mirror uses the factory 4-pin connector, yes; they are compatible with F-150 models 2015–2023.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these require wiring changes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No wiring modifications are needed—these plug into the OEM 4-pin connector for a direct swap.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55169042219351,"sku":"B0FKT4XB7Y","price":76.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-mirror-light-front-view.jpg?v=1790417449"},{"product_id":"jurplix-carburetor-replacement-kit-for-polaris-magnum-ranger-325-500-includes-air-filter-water-pump","title":"JURPLIX Carburetor Replacement Kit for Polaris Magnum \u0026 Ranger 325-500 - Includes Air Filter \u0026 Water Pump","description":"\u003cp\u003e\u003cstrong\u003eJURPLIX carburetor replacement kit restores reliable fueling to compatible Polaris ATVs and Rangers by supplying a complete carburetor, air filter, and water pump.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Polaris is hesitating at idle, choking under load, or showing inconsistent throttle response, a worn or faulty carburetor is a common cause. This JURPLIX kit is designed as a direct-fit replacement for a long list of Polaris models spanning the 1990s through mid-2010s, providing a single-purchase solution that addresses both air and fuel delivery as well as cooling via the included water pump. The kit's components are quality-inspected and backed by a one-year warranty; confirming your specific model and OE reference numbers before ordering ensures correct compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Polaris models and years will this carburetor fit?\u003c\/h3\u003e\n\u003cp\u003eThis JURPLIX kit covers many popular Polaris ATVs and Rangers across several model families and years. Refer to the detailed fitment list to confirm exact compatibility with your vehicle before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMagnum: 1995–2006 variants including 325, 330, 425, 500 where listed\u003c\/li\u003e\n  \u003cli\u003eRanger and Sportsman series spanning early 2000s to mid-2010s (Ranger 400\/425\/500 and Sportsman 300–700 ranges)\u003c\/li\u003e\n  \u003cli\u003eTrail-Boss, Trail-Blazer, Worker, Xplorer, Xpedition, Hawkeye, Big Boss, ATP models included in the fitment scope\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit improve engine performance and reliability?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn carburetor with this kit can restore even fuel metering and smoother throttle response, which helps engines run more consistently and efficiently. The package includes an air filter and water pump to address common companion failures that otherwise leave problems unresolved.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-machined carburetor passages for steady fuel delivery under variable loads\u003c\/li\u003e\n  \u003cli\u003eNew air filter to prevent contamination and improve combustion air quality\u003c\/li\u003e\n  \u003cli\u003eIncluded water pump to maintain cooling system integrity and avoid overheating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat OEM numbers and parts are matched by this JURPLIX replacement?\u003c\/h3\u003e\n\u003cp\u003eThe kit maps to many OE references so you can cross-check service records or parts diagrams. Matching OE numbers helps ensure fitment and reduces the chance of purchasing the wrong component for your machine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon OE references covered: 1203059, 1203060, 1253436, 1253438, and many others\u003c\/li\u003e\n  \u003cli\u003eFull OE list included with the product allows quick verification against factory parts lists\u003c\/li\u003e\n  \u003cli\u003eKit combines multiple replacement needs (carburetor, air filter, water pump) for convenience\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is similar to other aftermarket carburetor swaps: remove the old assembly, confirm hoses and throttle linkages match, install the new parts, and perform basic idle and mixture adjustments. Routine checks after a few rides ensure proper sealing and tuning.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic hand tools and a service manual are recommended for correct adjustments\u003c\/li\u003e\n  \u003cli\u003eInspect fuel lines, clamps, and gaskets during install; replace as needed\u003c\/li\u003e\n  \u003cli\u003eRun the engine and fine-tune idle and mixture per model-specific procedures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This JURPLIX carburetor kit is aimed at owners and professional mechanics who need a dependable, drop-in replacement for aging Polaris fuel systems covering many Magnum, Ranger, Sportsman, Trail-Boss, Trail-Blazer and related models. It is ideal for riders troubleshooting fuel delivery, restoring a machine for seasonal use, or performing a complete preventative overhaul. Confirm your model year and cross-check the OE numbers before purchase to ensure a proper fit; the one-year warranty and quality inspection give added confidence for long-term use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I check if this carburetor fits my Polaris model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare your vehicle year\/model against the kit's fitment list and verify one of the OE numbers matches your current part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include everything needed to replace the carburetor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes the carburetor, an air filter, and a water pump, but you may need basic installation tools and any gaskets or clamps not pictured.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55169105527127,"sku":"B0F5PJKQQH","price":88.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-carburetor-front-view.jpg?v=1790418774"},{"product_id":"jurplix-led-sequential-side-mirror-turn-signal-smoke-lens-2pcs-white-drl-amber-sequential-plug-and-play","title":"JURPLIX LED Sequential Side Mirror Turn Signal — Smoke Lens 2PCS, White DRL \u0026 Amber Sequential, Plug-and-Play","description":"\u003cp\u003e\u003cstrong\u003eJURPLIX LED Sequential Side Mirror Turn Signal Marker Light (smoke lens) is a plug-and-play replacement pair that delivers white parking\/DRL and amber sequential turn signals for compatible Ford F-150 and Super Duty trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two side mirror marker lights update worn or broken mirror signals with a smoked lens and sequential LED animation. Designed to match the factory wiring and mounting, they offer a direct swap for many recent Ford pickup mirror assemblies. The assembly combines a white output for parking\/daytime running functions and an amber sequential pattern for turn signaling, while meeting DOT and SAE standards for street use.\u003c\/p\u003e\n\n\u003ch3\u003eWill these fit my truck’s mirror housing?\u003c\/h3\u003e\n\n\u003cp\u003eThey are engineered to fit specific Ford models and mirror assemblies without modification. Confirm your mirror uses the same 4-pin connector and corresponds to the listed OEM part numbers to ensure compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Ford F-150 (2015–2023) and Super Duty F-250\/F-350\/F-450\/F-550 (2017–2023)\u003c\/li\u003e\n  \u003cli\u003eOEM reference numbers: HC3Z-13B374-A, HC3Z-13B375-A, FL3Z-13B374-CA, FL3Z-13B375-CA, FL3Z-13B374-CC, FL3Z-13B375-CC\u003c\/li\u003e\n  \u003cli\u003eRequires mirror assembly with 4-pin connector (supports parking\/DRL + turn functions)\u003c\/li\u003e\n  \u003cli\u003eNot compatible with mirrors using a 3-pin connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the white and amber modes work together?\u003c\/h3\u003e\n\n\u003cp\u003eThe lens houses separate LED circuits so the unit shows white light for parking or daytime running and switches to amber for the sequential turn signal. The internal wiring aligns with factory logic so all functions operate through the stock mirror control signals.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWhite LEDs activate for parking lights and daytime running functions\u003c\/li\u003e\n  \u003cli\u003eAmber LEDs run a sequential pattern for turn indication\u003c\/li\u003e\n  \u003cli\u003eUses the original-style 4-pin connector to retain built-in mirror light features\u003c\/li\u003e\n  \u003cli\u003eNo extra control modules required if your vehicle supports those functions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is involved in installation?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is designed to be straightforward: the JURPLIX pair replaces the factory mirror marker lights and plugs into the existing connector. No cutting, drilling, or vehicle wiring changes are necessary when installed on a compatible mirror assembly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes two sequential LED marker lights for driver and passenger sides\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play fit with included plug connectors\u003c\/li\u003e\n  \u003cli\u003eMounts into the factory mirror opening using original fasteners\u003c\/li\u003e\n  \u003cli\u003eDOT and SAE approved for simple replacement of damaged units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these side mirror lights?\u003c\/h3\u003e\n\n\u003cp\u003eThey are built for use on road vehicles where exposure to weather and vibration is common. Materials and sealing are chosen to resist moisture, dust and impact while keeping the unit lightweight.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eABS plastic housing with impact-resistant PC lens\u003c\/li\u003e\n  \u003cli\u003eWeather-sealed, waterproof, dustproof, and shock-resistant construction\u003c\/li\u003e\n  \u003cli\u003eRated lifespan of more than 50,000 hours under typical use\u003c\/li\u003e\n  \u003cli\u003eEngineered to meet road safety visibility and durability standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The JURPLIX LED Sequential Side Mirror Turn Signal Marker Light pair is intended for Ford owners who need a direct replacement or upgrade for their mirror signal lights on F-150 (2015–2023) or Super Duty (2017–2023) trucks. Choose these if your mirror assembly uses the 4-pin connector and you want a factory-style white parking\/DRL option plus an amber sequential turn signal with a smoked appearance—without splicing or custom wiring. If your mirror lacks parking\/DRL features or uses a 3-pin connector, this set will not be compatible.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these lights fit a Ford F-150 2016 mirror?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they fit Ford F-150 model years 2015–2023 if your mirror uses the 4-pin connector and matches listed OEM part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need extra wiring or modules to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No extra modules are needed on compatible mirrors; they plug into the factory 4-pin connector for parking\/DRL and turn functions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55169134133591,"sku":"B0FKT5Z485","price":76.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-front-view-smoke-lens.jpg?v=1790419220"},{"product_id":"jurplix-rv-camper-sewer-plumbing-connection-kit-3-pvc-slip-fit-adapters-gate-valve-carry-case","title":"JURPLIX RV \u0026 Camper Sewer Plumbing Connection Kit — 3\" PVC Slip-Fit Adapters, Gate Valve \u0026 Carry Case","description":"\u003cp\u003e\u003cstrong\u003eJURPLIX RV and Camper Sewage System Plumbing Connection Kit is a complete, portable set of slip-fit adapters and fittings that let you build a secure external sewer connection for 3\" PVC and standard RV sewer hoses.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit bundles the common adapters and connectors RV owners need to link a 3-inch PVC cleanout or stub-out to an RV sewer hose quickly and without special tools. Components are molded from corrosion-resistant PVC for repeated outdoor use, and the included carrying case keeps everything organized for transport between campsites or storage. Whether you're setting up a temporary dump station or creating a semi-permanent hookup at a seasonal site, this kit provides the parts to adapt, seal, and operate a reliable sewer transfer point.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit fit my RV sewer hose and campsite PVC?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes universal adapters and a 3-1 slip-fit cleanout adapter designed to bridge common size differences between RV fittings and 3\" PVC pipe. With a 4\" x 3\" gate valve adapter, flexible coupling, and slip-fit pieces, you can adapt most standard RV threads and smooth-bore pipe ends.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with 3\" PVC sewer pipe and typical RV sewer hose diameters\u003c\/li\u003e\n  \u003cli\u003eSlip-fit cleanout adapter for quick alignment and installation\u003c\/li\u003e\n  \u003cli\u003eFlexible 3\" x 3\" coupling absorbs minor misalignment\u003c\/li\u003e\n  \u003cli\u003eIncludes gate valve bushing and 90° elbow for routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and what do they each do?\u003c\/h3\u003e\n\u003cp\u003eThis all-in-one package supplies the main components needed to assemble an external sewer station or temporary hookup without hunting down individual fittings. Each piece has a specific role to create a leak-resistant, serviceable connection to your RV waste outlet.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGate valve bushing — interfaces with inline valve hardware\u003c\/li\u003e\n  \u003cli\u003e4\" x 3\" gate valve adapter — transitions from valve flange to 3\" pipe\u003c\/li\u003e\n  \u003cli\u003e90° elbow connector — routes flow neatly under or around obstructions\u003c\/li\u003e\n  \u003cli\u003e3\" x 3\" flexible coupling — cushions and seals between dissimilar surfaces\u003c\/li\u003e\n  \u003cli\u003e3-in-1 slip-fit sewer cleanout adapter — allows cleanouts and hose attachment\u003c\/li\u003e\n  \u003cli\u003ePipe cap — seals unused ends for storage or winterizing\u003c\/li\u003e\n  \u003cli\u003ePlastic storage container — organizes parts and prevents loss on the road\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed for field assembly: cut the PVC to length, slide on the flexible couplings and adapters, and tighten or clamp where recommended. Routine maintenance is minimal — inspect seals and coupling ends for wear, and replace the inexpensive components if they show cracking or excessive deformation after extended UV exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple slip-fit connections for tool-free alignment in many cases\u003c\/li\u003e\n  \u003cli\u003eDurable PVC resists corrosion so parts stay serviceable outdoors\u003c\/li\u003e\n  \u003cli\u003eCarrying case prevents lost pieces and speeds setup time\u003c\/li\u003e\n  \u003cli\u003eReplaceable parts keep long-term upkeep affordable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This kit is built for RV owners, seasonal campers, and park maintenance staff who need a portable, no-nonsense collection of sewer plumbing adapters compatible with 3\" PVC and common RV sewer hoses. It’s especially useful for Do-It-Yourselfers who prefer to assemble a custom external sewer station at a campsite, storage lot, or seasonal hookup. If you value organized, durable fittings that reduce the need to source individual adapters, this JURPLIX kit provides a compact solution ready for on-road use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this kit compatible with my RV sewer hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it's designed to adapt standard RV sewer hose fittings to 3\" PVC using included adapters and a flexible coupling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required for most setups; cutting PVC and using clamps or simple fasteners is usually sufficient.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55169144324439,"sku":"B0G7XHMYTZ","price":88.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-front-of-kit-open-case.jpg?v=1790419446"},{"product_id":"jurplix-fuel-pump-module-for-harley-davidson-sportster-883-1200-2007-2020-direct-fit-oem-level-flow","title":"JURPLIX Fuel Pump Module for Harley‑Davidson Sportster 883\/1200 (2007–2020) — Direct Fit, OEM‑Level Flow","description":"\u003cp\u003e\u003cstrong\u003eJURPLIX Fuel Pump module engineered to restore reliable fuel delivery for 2007–2020 Harley‑Davidson Sportster 883 and 1200 models with a plug‑and‑play replacement.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Sportster is showing signs of sluggish starts, uneven throttle response, or fuel pressure loss, the fuel pump module is a common wear item. This JURPLIX replacement matches the original equipment fit and key mounting points to simplify installation and return consistent fuel flow and pressure. It is designed as a direct swap for numerous OEM part numbers so you can replace the module without modifying wiring, hoses, or the tank assembly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this pump improve my Sportster’s starting and running behavior?\u003c\/h3\u003e\n\u003cp\u003eThe pump delivers steady fuel flow and maintains correct system pressure so the engine receives the required fuel at startup and under load. Restoring proper delivery reduces hard-starting, stalling, and hesitations during acceleration. Consistent pressure also helps the fuel injection or carburetion system operate within its intended parameters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDelivers OEM‑level flow and pressure for quicker starts\u003c\/li\u003e\n  \u003cli\u003eReduces stalling and throttle hesitation\u003c\/li\u003e\n  \u003cli\u003eHelps maintain smooth idling and steady acceleration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this JURPLIX module fit my Harley‑Davidson Sportster model?\u003c\/h3\u003e\n\u003cp\u003eYes — the unit is built to be compatible with Sportster 883 and 1200 models from 2007 through 2020. It replaces multiple OEM part numbers so you can match based on your bike’s pump reference. Confirm compatibility by checking the listed replacement numbers against your bike’s existing pump label.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 2007–2020 Sportster 883 and 1200 models\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers like 75305‑07A, 75268‑07A, 75301‑07 and others\u003c\/li\u003e\n  \u003cli\u003ePre‑assembled for direct replacement — no tank modifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and durability features of this replacement?\u003c\/h3\u003e\n\u003cp\u003eThe JURPLIX fuel pump module is manufactured from materials chosen to resist fuel exposure and typical road corrosion. Components meet or exceed many OEM tolerances to deliver reliable service life under normal riding conditions. The module is assembled and tested to provide consistent performance right out of the box.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh‑quality materials resist wear and fuel corrosion\u003c\/li\u003e\n  \u003cli\u003eOEM‑style connectors and mounting points for a secure fit\u003c\/li\u003e\n  \u003cli\u003ePre‑assembled and bench‑tested for dependable operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is the installation process for a home mechanic?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward: the module arrives pre‑assembled and is designed to plug into the existing tank fittings and electrical connector. Basic tools and a clean workspace are all that’s typically required. Follow safe tank‑handling practices and the vehicle service manual for fuel system precautions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug‑and‑play design — no custom wiring or modifications\u003c\/li\u003e\n  \u003cli\u003eCompatible connector and mounting locations for direct swap\u003c\/li\u003e\n  \u003cli\u003eInstallation requires basic tools and standard safety steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: Riders, independent mechanics, and restoration specialists who own or service Harley‑Davidson Sportster 883 and 1200 models from 2007 to 2020 and need a reliable, direct‑fit fuel pump module. It’s aimed at people wanting a straightforward replacement to restore stable fuel delivery without aftermarket alterations, whether for daily riders, project bikes, or performance tune‑up work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump fit my 2010 Sportster 883?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This JURPLIX pump is compatible with 2007–2020 Sportster 883 models. Verify by matching your existing pump’s OEM part number.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is any wiring or tank modification needed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The module is pre‑assembled for plug‑and‑play installation without wiring or tank alterations under normal fitment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55170506096983,"sku":"B0F4QNRFVS","price":111.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-fuel-pump-front-view.jpg?v=1790430043"},{"product_id":"jurplix-full-skid-plate-kit-for-2015-2022-ford-f150-4wd-steel-underbody-protection-bolt-on-no-drill-fit","title":"JURPLIX Full Skid Plate Kit for 2015-2022 Ford F150 4WD — Steel Underbody Protection, Bolt-On No-Drill Fit","description":"\u003cp\u003e\u003cstrong\u003eJURPLIX Full Skid Plate Kit is a bolt-on underbody guard that protects the engine and transmission of 2015–2022 Ford F150 4WD models without drilling or vehicle modification.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete skid plate system is engineered specifically for Ford F150 4WD trucks (compatible with listed V6 engines) to deliver heavy-duty underbody coverage while preserving service access and proper airflow. Constructed from high-strength steel and supplied with all mounting hardware and instructions, the kit is intended for drivers who need rugged protection on trails, construction sites, and seasonal roads.\u003c\/p\u003e\n\n\u003ch3\u003eWill this skid plate fit my F150 and which models are excluded?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit fits 2015–2022 Ford F150 4WD trucks with 2.7L EcoBoost, 3.3L, and 3.5L EcoBoost engines. It is not compatible with PowerBoost hybrid models or any 2WD configurations. Always verify engine and drivetrain before ordering to ensure correct fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: 2015–2022 F150 4WD — 2.7L EcoBoost, 3.3L, 3.5L EcoBoost (2015–2017 for 3.5L EcoBoost)\u003c\/li\u003e\n  \u003cli\u003eNot compatible: PowerBoost hybrid models\u003c\/li\u003e\n  \u003cli\u003eNot compatible: 2WD trucks\u003c\/li\u003e\n  \u003cli\u003eCheck your VIN or owner's manual if unsure about engine\/drivetrain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the JURPLIX full skid plate protect vital components?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit provides continuous underbody coverage to shield the oil pan, bell housing, and other exposed parts from impacts and road debris. Its robust steel construction resists dents and punctures while the full-width layout minimizes pinch points and direct strikes from rocks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-coverage plates for engine and transmission protection\u003c\/li\u003e\n  \u003cli\u003eHigh-strength steel resists impacts and deformation\u003c\/li\u003e\n  \u003cli\u003eSeam design reduces debris intrusion under the vehicle\u003c\/li\u003e\n  \u003cli\u003eProtects vulnerable components when off-roading or on rough surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and will it affect engine cooling or servicing?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is designed to be straightforward: all mounting hardware and instructions are included and the system bolts into factory points—no drilling required. The plate layout preserves airflow paths and provides clearances needed for routine oil changes and maintenance tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes all required bolts, brackets, and instructions\u003c\/li\u003e\n  \u003cli\u003eNo drilling or permanent vehicle modification needed\u003c\/li\u003e\n  \u003cli\u003eEngineered clearances to maintain airflow and heat dissipation\u003c\/li\u003e\n  \u003cli\u003eService access retained for routine maintenance operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finish does the skid plate use for durability?\u003c\/h3\u003e\n\n\u003cp\u003eJURPLIX manufactures the kit from high-strength steel chosen for impact resistance and long-term durability. The finish and fabrication processes guard against corrosion and wear so the protection remains reliable in demanding environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMade from heavy-gauge, high-strength steel for impact resilience\u003c\/li\u003e\n  \u003cli\u003eDurable surface treatment to reduce rust and abrasion\u003c\/li\u003e\n  \u003cli\u003ePrecision-formed panels to resist warping and maintain fitment\u003c\/li\u003e\n  \u003cli\u003eBuilt for repeated use in off-road and worksite conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The JURPLIX Full Skid Plate Kit is aimed at Ford F150 owners with 4WD who routinely drive on rough roads, work sites, or trails and want a factory-friendly, bolt-on solution to protect their vehicle's underbody. If you prioritize rugged protection without permanent vehicle alterations and need a kit that allows normal engine access and cooling, this product is a practical fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit require drilling to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the JURPLIX kit uses factory mounting points and includes hardware for a bolt-on installation without drilling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the skid plate fit PowerBoost hybrid F150 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, this kit is not compatible with PowerBoost hybrid models or 2WD F150 trucks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55170613543255,"sku":"B0F8GSDNJM","price":261.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-f150-full-skid-plate-front-view.jpg?v=1790431855"},{"product_id":"jurplix-rear-wheel-hub-bearing-assembly-2-pc-5-lug-for-subaru-forester-crosstrek-impreza-2012-2021-direct-fit-pre-assembled","title":"JURPLIX Rear Wheel Hub \u0026 Bearing Assembly 2-Pc 5-Lug for Subaru Forester\/Crosstrek\/Impreza (2012–2021) Direct-Fit, Pre-Assembled","description":"\u003cp\u003e\u003cstrong\u003eJURPLIX rear wheel hub and bearing assembly (2 pcs) is a complete replacement 5-lug unit engineered to restore rear wheel alignment, stability, and wheel-bearing performance on compatible Subaru models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Subaru shows wheel noise, vibration, or uneven tire wear, worn rear hubs and bearings are common culprits. This pair of hub assemblies is made as a direct-fit replacement for specific Subaru Forester, Impreza and Crosstrek years and trims, with OE cross-reference numbers 512518 and 28473FJ020. Each unit arrives machined and pre-assembled to simplify swap-out and get your vehicle back on the road with predictable handling.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these hub assemblies improve driving stability?\u003c\/h3\u003e\n\u003cp\u003eReplacing old or failing rear wheel bearings with complete hub assemblies reduces play at the wheel and restores precise wheel tracking. That tighter fit reduces steering wander and minimizes vibration, especially at highway speeds or when carrying a load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates bearing side-to-side and rotational play for steadier handling\u003c\/li\u003e\n  \u003cli\u003eReduces wheel noise and harmonic vibration transmitted into the cabin\u003c\/li\u003e\n  \u003cli\u003eRestores factory-spec wheel positioning for consistent alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Subaru models and trims will these parts fit?\u003c\/h3\u003e\n\u003cp\u003eThis 2-piece rear hub kit is designed for select Subaru model years and specific trims where the 5-lug hub and bearing assembly is required. Confirm year, model and trim before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2014–2018 Subaru Forester (rear 5-lug fitment)\u003c\/li\u003e\n  \u003cli\u003e2012–2014 Impreza (Base, Sport Limited, Sport Premium), and 2015–2021 Impreza\u003c\/li\u003e\n  \u003cli\u003e2016–2018 Crosstrek and 2019–2021 Crosstrek (Base, Limited, Premium), plus 2013–2015 XV Crosstrek\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality and design features should I expect from JURPLIX hubs?\u003c\/h3\u003e\n\u003cp\u003eJURPLIX assemblies are built with precision-machined bearing races and durable hub materials to meet or exceed OEM fit and function. Each unit is manufactured to withstand typical road stresses and to maintain service life similar to original equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision machining for correct wheel mounting and bearing preload\u003c\/li\u003e\n  \u003cli\u003eRobust materials chosen for corrosion resistance and longevity\u003c\/li\u003e\n  \u003cli\u003ePackaged as a complete hub-and-bearing assembly to speed installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eThese are engineered as direct-replacement assemblies to avoid pressing bearings in and out during replacement. Basic tools and standard shop procedures for rear hub replacement are normally all that’s required, but a shop manual or experienced mechanic is recommended for torque specifications and safety steps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled hubs remove the need for bearing pack or race installation\u003c\/li\u003e\n  \u003cli\u003eCommon tools: torque wrench, socket set, jack stands, breaker bar\u003c\/li\u003e\n  \u003cli\u003eVerify torque specs and ABS sensor steps if applicable to your model\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This JURPLIX 2-piece rear wheel hub and bearing assembly set is aimed at Subaru owners, independent mechanics, and DIY enthusiasts who need a reliable, OEM-referenced replacement for worn rear hubs on cited Forester, Impreza and Crosstrek model years and trims. Choose this kit if you want a pre-assembled, 5-lug direct-fit solution to address wheel noise, looseness, or brake and handling irregularities while maintaining factory-style fit and performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include both rear hubs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the listing contains two rear hub and bearing assemblies, one for each side of the vehicle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these direct-fit replacements or do they require additional parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are pre-assembled direct-fit units for compatible Subaru models; confirm trim and year, but no extra bearings are typically required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55170687795543,"sku":"B0F8QMQ1RB","price":131.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-rear-hub-assembly-front-view.jpg?v=1790432942"},{"product_id":"jurplix-manganese-steel-splash-panel-shield-for-ford-f-150-2015-2024-2-4mm-impact-resistant-direct-fit","title":"JURPLIX Manganese Steel Splash Panel Shield for Ford F-150 2015–2024 — 2.4mm Impact-Resistant, Direct-Fit","description":"\u003cp\u003e\u003cstrong\u003eJURPLIX manganese steel splash panel shield is a direct-fit underbody protector designed to replace the original splash panel on Ford F-150 2015–2024 gas and hybrid models, giving stronger impact resistance, improved heat dissipation, and long-lasting corrosion protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement splash panel is engineered as a like-for-like upgrade for many Ford F-150 trucks (2015–2024 gas and hybrid versions). It matches the OE mounting points and replaces OE numbers ML3Z-7222-D \/ ML3Z-7222-E so installation requires no drilling or cutting. Built from 2.4 mm (0.095 in) manganese alloy steel, the panel resists road debris, salt, and moisture while helping spread heat away from the engine bay—making it a durable choice for drivers who encounter rough roads, off-road trails, or harsh weather.\u003c\/p\u003e\n\n\u003ch3\u003eWill this splash panel fit my F-150 and which models are excluded?\u003c\/h3\u003e\n\n\u003cp\u003eConfirm compatibility by checking your year, engine type, and original part number before ordering. This JURPLIX shield fits Ford F-150 model years 2015 through 2024 for gas and hybrid engines and is made to replace OE ML3Z-7222-D and ML3Z-7222-E directly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits: Ford F-150 2015–2024 gas and hybrid models.\u003c\/li\u003e\n  \u003cli\u003eNot compatible: Raptor, 3.0L Diesel, and 5.0L V8 models.\u003c\/li\u003e\n  \u003cli\u003eTip: Verify your vehicle’s existing part number to ensure a direct match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the manganese steel construction help my truck?\u003c\/h3\u003e\n\n\u003cp\u003eThe thicker 2.4 mm manganese alloy provides improved toughness versus thin stamped panels. It resists dents and punctures from rocks and road debris while still shedding heat from the engine bay for stable under-hood conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaterial: 0.095 in (2.4 mm) manganese alloy steel for improved impact resistance.\u003c\/li\u003e\n  \u003cli\u003eHeat dissipation: Metal construction aids in moving heat away from components.\u003c\/li\u003e\n  \u003cli\u003eDurability: Designed to tolerate off-road and salt-exposed environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and will I need to modify my truck?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is intended to be straightforward because the shield is manufactured to match factory mounting holes and contours. No cutting, drilling, or permanent modification should be necessary when replacing the correct OE part.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect-fit: Matches original vehicle mounting points for bolt-on replacement.\u003c\/li\u003e\n  \u003cli\u003eNo-mod: No drilling or cutting required when replacing the correct OE part.\u003c\/li\u003e\n  \u003cli\u003eTools: Typical hand tools are sufficient for removal and reinstallation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protective benefits does this splash panel provide on the road?\u003c\/h3\u003e\n\n\u003cp\u003eThe panel protects vital underbody areas from physical damage, moisture, and contaminants that can accelerate wear. Its corrosion-resistant finish reduces the risk of rust, and its solid construction minimizes rattles or resonance that can come from thin plastic shields.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProtection: Guards the engine bay and lower chassis from scratches and impacts.\u003c\/li\u003e\n  \u003cli\u003eWeather resistance: Waterproof and sand-resistant properties for durability.\u003c\/li\u003e\n  \u003cli\u003eNoise control: Rigid construction prevents resonance and abnormal noise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The JURPLIX manganese steel splash panel shield suits Ford F-150 owners (2015–2024 gas and hybrid) who need a robust, direct-replacement underbody guard—drivers who want stronger impact resistance, improved longevity against corrosion, and a no-modification installation. Avoid this part if your truck is a Raptor, has a 3.0L Diesel, or uses a 5.0L V8; instead, verify the OE part number to confirm fit before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this panel fit my 2018 Ford F-150 3.5L EcoBoost?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits 2015–2024 gas and hybrid F-150s like the 3.5L EcoBoost if your OE part number matches ML3Z-7222-D\/E.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to drill or cut to install this shield?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No modification is required; the panel is designed as a direct-fit replacement using existing mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55170876997975,"sku":"B0FJ2DJNBW","price":183.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-front-view-splash-panel.jpg?v=1790435009"},{"product_id":"jurplix-serpentine-belt-tensioner-idler-pulley-kit-for-mercedes-benz-heat-treated-alloy-oe-2722000270-compatible","title":"JURPLIX Serpentine Belt Tensioner \u0026 Idler Pulley Kit for Mercedes‑Benz — Heat‑Treated Alloy, OE 2722000270 Compatible","description":"\u003cp\u003e\u003cstrong\u003eA complete JURPLIX serpentine belt tensioner and idler pulley kit engineered to restore proper belt tension and routing for compatible Mercedes‑Benz gasoline models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplace a worn tensioner or idler pulley with a kit built to match Mercedes‑style specifications and OE numbers (including 2722000270, 2722021019, 2722021419). This kit combines corrosion‑resistant alloy and heat‑treated components designed to resist heat, vibration, and chemical exposure, helping maintain consistent belt tracking and reduce slippage. Before ordering, confirm your vehicle model, engine size and OE part number to ensure correct fitment.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Mercedes models and engines does this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis JURPLIX kit covers a wide range of Mercedes‑Benz models from mid‑2000s to early 2010s. It is compatible with many C‑class, E‑class, S‑class, SLK, CLK, CLS, ML\/GL series and select sport models equipped with the listed engines and OE references.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExamples include C230 (2006–2007 2.5L), C350 (2006–2011 3.5L), E350 (2006–2011 3.5L), S550 (2007–2011 5.5L), and G550 (2009–2015 5.5L).\u003c\/li\u003e\n  \u003cli\u003eAlso fits SUVs and crossovers: GL450\/GL550 (2007–2012), ML350\/ML550 (2006–2011), GLK350 (2010–2012).\u003c\/li\u003e\n  \u003cli\u003eConfirm engine displacement and OE numbers (e.g., 272 200 02 70) before purchase to avoid fitment issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit improve belt performance and longevity?\u003c\/h3\u003e\n\u003cp\u003eThe kit is manufactured from premium alloy steel and aluminum with heat‑treated components to preserve alignment under load. Proper tension and smooth idler rotation reduce belt flutter and friction, which helps decrease accelerated wear and the chance of slippage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision bearings deliver consistent rotation and minimal drag.\u003c\/li\u003e\n  \u003cli\u003eHeat‑resistant materials withstand high under‑hood temperatures.\u003c\/li\u003e\n  \u003cli\u003eCorrect tensioning reduces noise, vibration and premature belt failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat OE numbers and belt specifications should I check before ordering?\u003c\/h3\u003e\n\u003cp\u003eMatch the kit to your vehicle by verifying the OE and alternate part numbers printed on your original components. This kit corresponds to several Mercedes reference numbers and supports the common belt spec used on these engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE references: 2722000270, 2722021019, 2722021419.\u003c\/li\u003e\n  \u003cli\u003eAlternate formats: 272 200 02 70, 272 202 10 19, 272 202 14 19.\u003c\/li\u003e\n  \u003cli\u003eOther cross numbers: A0039937296, A2722000270, A2722020000, A2722021419; belt spec: 6PK2404.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is a standard repair for belt routing systems; trained DIYers with proper tools can perform the swap, though professional installation ensures torque and alignment meet manufacturer tolerance. Inspect the belt and accessories at the same time and replace the belt if it shows cracking, glazing or missing ribs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse correct torque values for mounting bolts and tensioner pulley hardware.\u003c\/li\u003e\n  \u003cli\u003eReplace the serpentine belt if wear or damage is present.\u003c\/li\u003e\n  \u003cli\u003eRecheck pulley alignment and belt tension after a short test drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: JURPLIX designed this serpentine belt tensioner and idler pulley kit for Mercedes‑Benz owners and mechanics who need a robust, OE‑referenced replacement for mid‑2000s to early‑2010s gasoline models. It is ideal for workshops doing scheduled maintenance or for enthusiasts restoring correct belt drive function on models listed in the fitment section. Always verify model year, engine code and OE part numbers before purchase to ensure a seamless replacement and reliable belt drive operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm this kit fits my Mercedes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your vehicle year, engine displacement and OE numbers (e.g., 2722000270). Match them to the kit listings before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Should I replace the serpentine belt when installing this kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — inspect the belt for cracks or glazing and replace it if worn to ensure optimal performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55171208446295,"sku":"B0FBGDG9GB","price":71.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-tensioner-pulley-kit-front-packaging.jpg?v=1790440526"},{"product_id":"jurplix-rv-2-stage-auto-changeover-propane-regulator-kit-dual-tank-48-stainless-braided-hose-gauge","title":"JURPLIX RV 2-Stage Auto Changeover Propane Regulator Kit — Dual-Tank, 48\" Stainless Braided Hose \u0026 Gauge","description":"\u003cp\u003e\u003cstrong\u003eJURPLIX RV 2-Stage Auto Changeover LP Propane Gas Regulator is a complete dual-tank conversion kit that automatically switches between cylinders, includes stainless braided hoses, a glow-in-the-dark gauge, and all mounting hardware for safe, continuous propane supply.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one regulator set is built for RVs, campers, trailers and other outdoor setups that use two propane cylinders. It combines a 2-stage automatic changeover regulator with a 48\" stainless braided supply hose, two 18\" pigtail hoses with a gauge, and the fittings and tools you need for installation. Components are made from brass and stainless-steel braid to resist corrosion and deliver a secure, leak-resistant connection suitable for outdoor use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the automatic changeover keep my appliances running?\u003c\/h3\u003e\n\u003cp\u003eThe regulator continuously monitors the primary tank and flips to the reserve tank when the primary is depleted, avoiding sudden service interruptions. A clear indicator light system helps you identify when a tank is empty or when the system is operating normally.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeamless switch between primary and reserve cylinders to prevent shutdowns.\u003c\/li\u003e\n\u003cli\u003eRed light shows an empty\/off tank; green indicates normal operation.\u003c\/li\u003e\n\u003cli\u003e2-stage regulation maintains steady delivery pressure for sensitive appliances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications and fittings I should know?\u003c\/h3\u003e\n\u003cp\u003eThe regulator is sized for heavy RV use with a primary capacity rated up to 210,000 BTU\/hr and a reserve rated to 130,000 BTU\/hr. Inlets use QCC1 1\/4\" SAE inverted flare fittings while the outlet is a 3\/8\" female NPT, and the pigtails include a quick-disconnect plug for straightforward connections.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary cylinder capacity: 210,000 BTU\/hr; reserve: 130,000 BTU\/hr.\u003c\/li\u003e\n\u003cli\u003eInlets: QCC1 1\/4\" SAE inverted flare; outlet: 3\/8\" female NPT.\u003c\/li\u003e\n\u003cli\u003eIncludes 18\" pigtails with 1\/4\" male quick-disconnect plug and QCC1 fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is the kit for outdoor RV use?\u003c\/h3\u003e\n\u003cp\u003eMaterials are chosen for long-term outdoor performance: solid brass fittings resist corrosion and the stainless-steel braided hoses add abrasion protection. The kit is CSA certified for outdoor applications and includes a glow-in-the-dark gauge so you can monitor pressure and spot leaks without removing tanks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStainless braided hoses for abrasion and weather resistance.\u003c\/li\u003e\n\u003cli\u003eBrass fittings for secure, leak-resistant connections.\u003c\/li\u003e\n\u003cli\u003eGlow-in-the-dark pressure gauge for nighttime monitoring and leak detection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe package contains the two-stage regulator, a 48\" stainless braided regulator hose, two 18\" pigtail hoses with gauge, a 3\/8\" NPT male-to-male flare adapter, sealing tape, a wrench, screws, and a mounting bracket. Most owners with basic tool skills can complete the installation using the included parts and standard hand tools; always follow safety procedures and local codes when working with propane.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete kit: regulator, 48\" hose, 2 x 18\" pigtails with gauge, adapters, tape, wrench, screws, bracket.\u003c\/li\u003e\n\u003cli\u003eDesigned for homeowner installation or easy handoff to a certified technician.\u003c\/li\u003e\n\u003cli\u003eCSA-certified components for outdoor propane systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This kit is ideal for RV and trailer owners who use dual propane cylinders and want uninterrupted fuel supply for cooking, heating, refrigeration, or grills. It suits campers, travel trailer owners, motorhome operators, and anyone seeking a corrosion-resistant, ready-to-install changeover system with a visible gauge for routine monitoring.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this regulator work with single-tank setups?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it can be used with a single tank, though it’s designed for dual-tank automatic changeover to provide uninterrupted supply.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the kit compatible with standard RV propane fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it uses QCC1 1\/4\" SAE inverted flare inlets and a 3\/8\" female NPT outlet compatible with most RV systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JURPLIX","offers":[{"title":"Default Title","offer_id":55172024566103,"sku":"B0FK54JLTW","price":89.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/jurplix-front-regulator-assembly.jpg?v=1790450112"}],"url":"https:\/\/britishgarage.co.uk\/collections\/jurplix.oembed","provider":"British Garage","version":"1.0","type":"link"}