{"title":"OGATOO","description":"\u003cp\u003eBrowse 27 OGATOO products at British Garage, including engine \u0026amp; vehicle sensors, brake parts and fuel system parts. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked UK delivery on every order and 30-day returns.\u003c\/p\u003e","products":[{"product_id":"ogatoo-abs-wheel-speed-sensor-pair-for-2010-2017-chevy-equinox-gmc-terrain-front-left-right-2-pin-plug-oe-fit","title":"OGATOO ABS Wheel Speed Sensor Pair for 2010–2017 Chevy Equinox \u0026 GMC Terrain — Front Left \u0026 Right, 2-Pin Plug, OE Fit","description":"\u003cp\u003e\u003cstrong\u003eOGATOO front ABS wheel speed sensor pair replaces OEM sensors on 2010–2017 Chevy Equinox and GMC Terrain to restore accurate wheel speed readings for your vehicle's stability systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your ABS, traction control, or speedometer is acting up, worn or failed wheel speed sensors are a common cause. This listing includes two front ABS wheel speed sensors (driver and passenger side) engineered to match factory fit and function for Chevrolet Equinox and GMC Terrain model years 2010 through 2017. Each sensor uses a 2-pin connector and ships as a pair so both front corners can be serviced at once.\u003c\/p\u003e\n\n\u003ch3\u003eWill these sensors fit my Equinox or Terrain?\u003c\/h3\u003e\n\u003cp\u003eThese sensors are designed specifically for front-left and front-right positions on 2010–2017 Chevrolet Equinox and GMC Terrain. They correspond to common OEM part numbers used across those model years, but vehicle options and regional variations can differ.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: Chevy Equinox 2010–2017 and GMC Terrain 2010–2017 (front left\/right).\u003c\/li\u003e\n  \u003cli\u003eCompatible OEM\/alt numbers: 20811372, 20811371, ALS1994, 14602750.\u003c\/li\u003e\n  \u003cli\u003eConnector: 2-pin electrical plug matching factory harness.\u003c\/li\u003e\n  \u003cli\u003eSold as: 2-piece set (driver and passenger front sensors).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know when a wheel speed sensor needs replacing?\u003c\/h3\u003e\n\u003cp\u003eFaulty wheel speed sensors commonly trigger ABS, traction control, or stability control warning lights and can affect cruise control or speedometer behavior. Problems often show up as intermittent alerts or inconsistent braking behavior under electronic control, especially during turns or on slippery surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWarning lights: ABS, traction control, or stability light illumination.\u003c\/li\u003e\n  \u003cli\u003eDriving symptoms: erratic speedometer or inconsistent traction control activation.\u003c\/li\u003e\n  \u003cli\u003eDiagnostic tip: scan with an OBD-II tool for wheel speed sensor trouble codes.\u003c\/li\u003e\n  \u003cli\u003ePhysical check: damaged wiring or corroded connector can indicate failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the technical details and quality assurances?\u003c\/h3\u003e\n\u003cp\u003eEach OGATOO sensor is manufactured to match the physical dimensions and electrical characteristics of the original equipment so installation is straightforward. The sensors are built for durability and tested to withstand wheel-end conditions like moisture, dirt, and vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eItem type: ABS wheel speed sensor, front-left and front-right included.\u003c\/li\u003e\n  \u003cli\u003eConnector pins: 2-pin plug to mate with factory harness.\u003c\/li\u003e\n  \u003cli\u003eConstruction: corrosion-resistant housing and sealed electrical terminals.\u003c\/li\u003e\n  \u003cli\u003eWarranty: 12-month limited coverage and 24\/7 after-sales support from OGATOO.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install these sensors and what should I watch for?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically a straightforward bolt-and-plug replacement at each front wheel hub. Use basic hand tools and follow vehicle-specific torque specs; avoid pinching the connector or stressing the harness when routing the cable back into the factory clips.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools commonly needed: jack and stands, socket set, torque wrench, screwdrivers.\u003c\/li\u003e\n  \u003cli\u003eInstallation steps: lift vehicle, remove wheel, unbolt old sensor, unplug connector, fit new sensor, secure wiring to factory clips.\u003c\/li\u003e\n  \u003cli\u003eTip: clean mounting surface and inspect rotor\/ABS tone ring for damage before fitting new sensor.\u003c\/li\u003e\n  \u003cli\u003eAfter install: clear any ABS-related trouble codes with a scanner and perform a short test drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This OGATOO ABS wheel speed sensor pair is intended for DIY mechanics and professional technicians servicing Chevrolet Equinox or GMC Terrain front-end ABS systems for model years 2010–2017. It suits owners who want a like-for-like replacement to restore reliable wheel speed feedback for ABS and traction systems, and for garages seeking affordable, warrantied parts that meet common OEM specifications. Always verify fit by checking your vehicle’s VIN or existing part numbers before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this set include both front sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the package contains two front ABS sensors: driver and passenger side.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these sensors compatible with my 2014 Equinox?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit Chevy Equinox 2010–2017 and GMC Terrain 2010–2017; verify with your OEM part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55161598050647,"sku":"B0G289ZZXL","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatOO-front-pair-packaging.jpg?v=1790330014"},{"product_id":"ogatoo-crankshaft-position-sensor-for-4-0l-v6-nissan-suzuki-2005-2020-direct-fit-oem-style-plug-and-play","title":"OGATOO Crankshaft Position Sensor for 4.0L V6 Nissan\/Suzuki (2005–2020) — Direct-Fit, OEM-Style Plug-and-Play","description":"\u003cp\u003e\u003cstrong\u003eOGATOO's direct-fit crankshaft position sensor replaces the factory unit for 4.0L V6 Nissan and Suzuki vehicles to restore reliable starting, smoother idle, and accurate engine timing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Nissan Frontier, Xterra, Pathfinder, NV-series, or Suzuki Equator with the 4.0L V6 shows rough starts, intermittent stalls, or a persistent check engine light, a failing crankshaft position sensor (CKP) is often the culprit. This OGATOO sensor is built as a plug-and-play replacement that mirrors OEM mounting, connector type, and electrical specifications to minimize installation time and troubleshooting.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this sensor affect starting and idling?\u003c\/h3\u003e\n\u003cp\u003eA healthy crankshaft position sensor delivers precise crank position and RPM data to the engine control module, which the vehicle uses to time fuel injection and ignition. Replacing a worn or damaged sensor typically eliminates hard starting, rough idling, and unexpected stalls by restoring correct timing information.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eResolves symptoms like long cranks, intermittent stalls, and rough idle.\u003c\/li\u003e\n  \u003cli\u003eImproves engine timing consistency to reduce misfires and vibrations.\u003c\/li\u003e\n  \u003cli\u003eDirect replacement designed to match OEM mounting and connector layout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers are compatible with this OGATOO sensor?\u003c\/h3\u003e\n\u003cp\u003eThis CKP unit fits a wide range of Nissan and Suzuki models that use the 4.0L V6 engine across model years 2005–2020. Always compare the original part number and connector type before ordering to ensure 100% fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Nissan Frontier (2005–2020), Xterra (2005–2015), Pathfinder (2005–2012), NV1500\/NV2500\/NV3500 (2012–2019\/2012–2015) and Suzuki Equator (2009–2012).\u003c\/li\u003e\n  \u003cli\u003eCross-references OEM numbers such as 23731EA20A\/C\/D, 23731EA220\/221\/26C\/E and related part codes.\u003c\/li\u003e\n  \u003cli\u003eCheck mounting points, connector style, and original part numbers for exact match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this sensor easy to install and reliable long term?\u003c\/h3\u003e\n\u003cp\u003eOGATOO designed this sensor for plug-and-play installation so no programming or vehicle modification should be required. The housing and connectors are made to resist heat, oil, and vibration for extended life, and the unit is supplied with customer support and a one-year warranty.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement — no special tools or reflashing typically needed.\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature-resistant housing and corrosion-proof connectors.\u003c\/li\u003e\n  \u003cli\u003eBacked by OGATOO support and a 1-year warranty for peace of mind.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat signs tell me the sensor needs changing right now?\u003c\/h3\u003e\n\u003cp\u003eLook for symptoms such as intermittent stalling, inconsistent acceleration, decreased fuel economy, or a check engine light that returns after repair attempts. If diagnostics point to a crankshaft position fault code or the sensor shows physical wear, replacement is a straightforward next step.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon symptoms: hard starting, misfires, poor fuel economy, or stalling.\u003c\/li\u003e\n  \u003cli\u003eDiagnostic trouble codes referencing crankshaft sensor or timing inconsistencies.\u003c\/li\u003e\n  \u003cli\u003eVisible damage to the sensor, corroded connectors, or oil-soaked housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This OGATOO crankshaft position sensor is aimed at DIY mechanics and professional technicians working on Nissan Frontier, Xterra, Pathfinder, NV-series vans, or Suzuki Equator vehicles with the 4.0L V6 engine. It's ideal for anyone seeking a cost-effective, OEM-compatible replacement that restores engine timing and drivability without complicated installation or programming. Before purchase, verify your vehicle year, model, and the original part number against the listed references to ensure a precise fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this sensor fit my 2010 Nissan Xterra 4.0L V6?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, OGATOO lists fitment for Xterra 2005–2015 4.0L V6, but confirm your original part number and connector match before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does installation require programming or ECU reflash?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No programming is typically needed; this is a direct plug-and-play replacement designed to work with the existing ECU.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55162726351191,"sku":"B0FZTWNHSH","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-front-mounting-sensor.jpg?v=1790338400"},{"product_id":"ogatoo-camshaft-position-sensor-2-pack-direct-fit-replacement-for-2007-2017-dodge-jeep-chrysler-oem-match","title":"OGATOO Camshaft Position Sensor 2-Pack — Direct-Fit Replacement for 2007–2017 Dodge, Jeep \u0026 Chrysler, OEM-Match","description":"\u003cp\u003e\u003cstrong\u003eOGATOO 2-pack camshaft position sensors are direct-fit replacement sensors that restore accurate cam timing feedback for compatible 2007–2017 Dodge, Jeep and Chrysler engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle exhibits rough idling, intermittent stalling, a check engine light with P0340\/P0345 codes, or poor acceleration, a failing camshaft position sensor may be the culprit. This dual-pack replacement from OGATOO is manufactured to match OEM mounting, connector type, and signal function so you can swap sensors without modification or extra programming. Each sensor is built with heat-resistant housing and corrosion-proof connectors for durability in under-hood conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these sensors affect engine performance?\u003c\/h3\u003e\n\u003cp\u003eA functioning camshaft position sensor provides the Engine Control Unit (ECU) with precise camshaft angle and position data, which the ECU uses to time fuel injection and ignition. Replacing a faulty sensor helps the engine run smoother, reduces misfires, and can improve starting reliability and fuel economy.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores correct cam timing signals to the ECU for accurate ignition and injection.\u003c\/li\u003e\n  \u003cli\u003eReduces symptoms like rough idle, misfires, and poor acceleration.\u003c\/li\u003e\n  \u003cli\u003eHelps clear related trouble codes when used to repair P0340\/P0345 errors.\u003c\/li\u003e\n  \u003cli\u003eTwo sensors in the package let you replace both banks where applicable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers are compatible with this OGATOO sensor?\u003c\/h3\u003e\n\u003cp\u003eThis sensor fits many Chrysler Group engines built between 2007–2017. Before purchasing, confirm year, engine size, connector shape, and original part numbers to ensure compatibility with your vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Dodge Avenger, Caliber, Dart, Journey and select Chrysler models (2.0L, 2.4L, 3.5L V6, 3.6L V6 where listed).\u003c\/li\u003e\n  \u003cli\u003eCompatible Jeep models include Cherokee, Compass, Patriot, and some Renegade 2.4L years.\u003c\/li\u003e\n  \u003cli\u003eCross-reference OEM numbers: 5033308AB, 68080819AB\/AC, PC748, 5S8954, 715363, 917700.\u003c\/li\u003e\n  \u003cli\u003eAlways verify against your vehicle’s original sensor and images to confirm fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and will I need special tools?\u003c\/h3\u003e\n\u003cp\u003eOGATOO engineers these camshaft position sensors as plug-and-play replacements that match factory mounting points and electrical connectors. Typical installation requires basic hand tools and about 30–60 minutes depending on vehicle layout; no ECU reprogramming is generally required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement design for bolt-on fit and OEM connector compatibility.\u003c\/li\u003e\n  \u003cli\u003eBasic tools like a ratchet, socket set, and possibly a small extension are usually sufficient.\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle service manual or provided steps; disconnect the battery before replacing sensors.\u003c\/li\u003e\n  \u003cli\u003eOGATOO customer support is available if you need guidance during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and warranty can I expect from these sensors?\u003c\/h3\u003e\n\u003cp\u003eThese sensors are built with materials chosen to resist heat, oil, and vibration found in engine compartments. OGATOO tests sensors for premature failure modes and provides a one-year warranty to cover manufacturing defects, along with customer support if problems arise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-temperature-resistant housing and corrosion-proof electrical contacts.\u003c\/li\u003e\n  \u003cli\u003eEngineered and tested for oil, heat, and vibration durability.\u003c\/li\u003e\n  \u003cli\u003ePackage includes two brand-new camshaft position sensors and a 1-year warranty.\u003c\/li\u003e\n  \u003cli\u003eOGATOO support team can assist with fitment or replacement inquiries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This OGATOO 2-pack is suited for DIY mechanics, independent repair shops, and vehicle owners who need a reliable, cost-effective replacement for failing camshaft position sensors on compatible Dodge, Jeep, and Chrysler models from approximately 2007–2017. If you see timing-related drivability issues or stored camshaft sensor codes and want a direct-fit, durable replacement without programming, this kit is designed for you. Always verify fitment by comparing OEM part numbers, connector style, and mounting points before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these sensors fit my 2012 Dodge Caliber 2.4L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Likely yes for most 2012 Caliber 2.4L models, but always cross-check your OEM part number and connector style before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to program the ECU after installing these sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No programming is typically required; these are plug-and-play direct replacements matching OEM connectors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55163239399767,"sku":"B0FL73X34K","price":32.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-front-packaging-sensors.jpg?v=1790342377"},{"product_id":"ogatoo-camshaft-position-sensor-for-gm-trucks-suvs-2004-2015-direct-fit-replacement-for-12591720-pc620-plug-and-play","title":"OGATOO Camshaft Position Sensor for GM Trucks \u0026 SUVs 2004–2015 — Direct-Fit Replacement for 12591720 PC620, Plug-and-Play","description":"\u003cb\u003eOGATOO Camshaft Position Sensor is a direct-fit replacement sensor that monitors camshaft position to restore accurate engine timing for many 2004–2015 GM V6\/V8 vehicles.\u003c\/b\u003e\n\n\u003cp\u003eIf your GM truck or SUV is showing symptoms like hard starts, rough idling, a check engine light with P0340\/P0345 codes, poor acceleration, or higher fuel use, the camshaft position sensor is a common, serviceable cause. This OGATOO unit replaces OEM references such as 12591720 and PC620 and is built to plug directly into compatible Chevrolet, GMC, Cadillac, Hummer and related models without needing reprogramming.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this OGATOO camshaft position sensor fit?\u003c\/h3\u003e\n\u003cp\u003eThis sensor fits a wide range of GM models across model years roughly 2004–2015. Always cross-check your vehicle year, engine displacement and OEM reference number to ensure proper match before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet Silverado, Tahoe, Suburban, Avalanche, Camaro, Colorado, Trailblazer, Corvette, Express vans\u003c\/li\u003e\n  \u003cli\u003eGMC Sierra, Yukon, Savana vans, Canyon; Cadillac Escalade, CTS; Hummer H2\/H3; Buick Rainier; Saab 9-7X and others listed in product fitment\u003c\/li\u003e\n  \u003cli\u003eCompatible with engines including 4.8L, 5.3L, 6.0L, 6.2L, and select 8.1L and V8 applications\u003c\/li\u003e\n  \u003cli\u003eReference numbers covered include 12591720, 12568983, 12585545, PC620 and multiple cross-references\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eOGATOO designs this camshaft position sensor as a plug-and-play replacement — most owners or mechanics can swap it without ECU reprogramming. Installation time varies by vehicle and engine bay access but generally takes under an hour with basic hand tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical tools: ratchet, extension, 10–13 mm sockets or wrench and a flat screwdriver\u003c\/li\u003e\n  \u003cli\u003eNo special programming equipment required for direct-fit applications\u003c\/li\u003e\n  \u003cli\u003eInspect connector type and mounting tab orientation against your original sensor before fitting\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle-specific service manual steps for safe battery disconnection and torque specs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability features does this sensor offer?\u003c\/h3\u003e\n\u003cp\u003eThe OGATOO sensor is engineered for automotive operating conditions: heat resistance, oil exposure, vibration and corrosion protection are prioritized to reduce premature failures. It transmits precise camshaft angle data to the ECU to help maintain intended ignition and fuel injection timing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-temperature-resistant housing and corrosion-proof electrical connectors\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist oil contamination and engine-bay vibration\u003c\/li\u003e\n  \u003cli\u003eManufactured to match OEM mounting points and connector pinout for a proper electrical fit\u003c\/li\u003e\n  \u003cli\u003eBacked by a 1-year limited warranty and customer support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can I tell if the camshaft position sensor is the problem?\u003c\/h3\u003e\n\u003cp\u003eFaulty cam sensors often trigger engine drivability symptoms and diagnostic trouble codes. Use a scanner to confirm P0340\/P0345 or related codes, and visually inspect the old sensor and connector for oil or corrosion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon signs: intermittent stalling, hard starts, rough idle, misfires, or a persistent check engine light\u003c\/li\u003e\n  \u003cli\u003eVerify by checking codes with an OBD-II scanner and comparing live camshaft position data to crank data\u003c\/li\u003e\n  \u003cli\u003eVisually compare OEM sensor, mounting position, and connector type before ordering\u003c\/li\u003e\n  \u003cli\u003eReplacing the sensor is a cost-effective first step before deeper mechanical diagnosis\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: this OGATOO camshaft position sensor is aimed at DIY mechanics, independent shops, and fleet managers who need an affordable, reliable direct-replacement part for GM trucks, vans and SUVs from the mid-2000s through mid-2010s. If you require OEM-referenced compatibility (for example 12591720 or PC620), want a plug-and-play swap with durable materials and corrosion-resistant connectors, and expect basic warranty support, this sensor is built for your application. Always verify fitment with your vehicle’s year, engine and the original sensor’s connector and mounting before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this sensor require programming after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No programming is typically required for direct-fit OGATOO sensors; they are plug-and-play for compatible models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which OEM part numbers does this replace?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This unit cross-references numbers like 12591720, 12568983 and PC620; verify against your original part number.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55163551875415,"sku":"B0FL6TNQKW","price":31.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-camshaft-front-view.jpg?v=1790345400"},{"product_id":"ogatoo-rear-liftgate-gas-struts-for-2002-2009-chevy-trailblazer-pair-oe-length-21-6-14-0-smooth-quiet-lift","title":"OGATOO Rear Liftgate Gas Struts for 2002–2009 Chevy Trailblazer — Pair, OE-Length 21.6\"\/14.0\" Smooth Quiet Lift","description":"\u003cp\u003e\u003cstrong\u003eOGATOO rear liftgate gas springs are a direct-fit replacement set engineered to restore smooth, quiet opening and secure holding for the Trailblazer hatch.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf the rear hatch on your 2002–2009 Chevrolet Trailblazer (and compatible GM siblings) no longer stays open or lifts unevenly, worn gas struts are often the culprit. These OGATOO lift supports are manufactured to match original equipment lengths and mounting cues so you can replace both weakened struts quickly and return the tailgate to reliable operation.\u003c\/p\u003e\n\n\u003ch3\u003eWill these gas springs fit my vehicle model?\u003c\/h3\u003e\n\u003cp\u003eThese struts are compatible with multiple GM SUVs produced in the 2002–2009 window, but fitment depends on year and submodel. Verify your vehicle against the listed applications and OE replacement numbers before buying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: 2002–2009 Chevrolet Trailblazer, 2002–2009 GMC Envoy, 2004–2007 Buick Rainier\u003c\/li\u003e\n  \u003cli\u003eAlso fits: 2002–2004 Oldsmobile Bravada, 2005–2009 Saab 9-7x, 2004–2008 Isuzu Ascender\u003c\/li\u003e\n  \u003cli\u003eCross-reference OE numbers: 4576, PM2033, SG230063, SE1024M-85, SE1050V-85, 2985EV, D45833\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these struts perform compared to the original parts?\u003c\/h3\u003e\n\u003cp\u003eOGATOO supports are built to meet or exceed original equipment standards so they deliver comparable lift force and damping. Each unit is tested to ensure consistent operation, minimal vibration, and low noise for a factory-like feel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-engineered with matching extended\/compressed lengths: 21.60\" extended, 14.01\" compressed\u003c\/li\u003e\n  \u003cli\u003eDesigned for quiet, smooth motion with stable holding capability\u003c\/li\u003e\n  \u003cli\u003eLightweight construction while maintaining long-term durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what’s included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for most DIYers and professional technicians alike. The pair comes ready to install and is shaped to match OE mounting points so no custom modifications are needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contains two gas struts — one for each side of the liftgate\u003c\/li\u003e\n  \u003cli\u003eFits original ball-stud or bracket mounts; simple pry-off and snap-on replacement\u003c\/li\u003e\n  \u003cli\u003eNo special tools required for standard installations; torque to manufacturer specs if provided\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support are provided?\u003c\/h3\u003e\n\u003cp\u003eOGATOO stands behind these lift supports with a 12-month warranty covering defects that affect functionality. If a product arrives damaged or fails under normal use, contact after-sale service for a prompt response.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-month warranty included\u003c\/li\u003e\n  \u003cli\u003eCustomer support replies within 24 hours for warranty or fitment questions\u003c\/li\u003e\n  \u003cli\u003eReplacement or troubleshooting offered for faulty items\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This replacement set is ideal for Trailblazer owners, mechanics, and restoration projects where the rear hatch does not stay open, raises unevenly, or feels sluggish. It’s also suited for owners of the listed GMC, Buick, Oldsmobile, Saab, and Isuzu models who need a dependable, factory-like replacement for worn or leaking tailgate gas springs. Confirm vehicle year and OE cross-reference numbers before ordering to ensure correct fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these gas struts fit my 2003 Chevrolet Trailblazer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, these OGATOO struts are designed to fit 2002–2009 Trailblazer models; confirm OE numbers to be sure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long are the struts when extended?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each strut measures 21.60 inches extended and 14.01 inches when compressed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55163603091799,"sku":"B0DNRYQWTF","price":31.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-trailblazer-rear-liftgate-front-view.jpg?v=1790345916"},{"product_id":"ogatoo-power-door-lock-actuator-2-pack-left-front-1985-2005-oe-fit-metal-housing-tested","title":"OGATOO Power Door Lock Actuator 2-Pack Left Front 1985–2005 OE Fit Metal Housing Tested","description":"\u003cp\u003e\u003cstrong\u003eOGATOO 2 PCS Power Door Lock Actuator replaces worn left-side door actuators to restore reliable power locking for compatible Chevy, GMC, Buick and Cadillac models from 1985–2005.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two replacement actuators are engineered to match OE fit and function for a wide range of Chevrolet, GMC, Buick and Cadillac vehicles built between 1985 and 2005. Manufactured from reinforced metal components and electrically tested, the pair is intended to bring a non-working or intermittent left-side door lock back to consistent operation without modifying factory hardware.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and model years will this actuator fit?\u003c\/h3\u003e\n\u003cp\u003eThis OGATOO kit covers many GM platforms from late 1980s through mid-2000s, including Astro, Tahoe, Suburban, Yukon, Silverado variants and multiple Buick\/Cadillac models. Check your original part number or compare mounting and connector style to confirm compatibility before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits: Astro, Tahoe, Suburban, Yukon, Sierra\/Silverado family, Sonoma, Blazer, S10\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Camaro, Monte Carlo, Regal, Eldorado, Escalade and various van and truck models\u003c\/li\u003e\n  \u003cli\u003eModel years spanned: 1985–2005 (verify with vehicle-specific diagrams)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this actuator match the original part?\u003c\/h3\u003e\n\u003cp\u003eOGATOO actuators are designed to meet or exceed original equipment dimensions and electrical connectors so installation uses existing door hardware. The unit replaces dozens of OE reference numbers and undergoes bench electrical tests to ensure reliable motor and gear operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacements for numerous OEM numbers for left\/front door applications\u003c\/li\u003e\n  \u003cli\u003ePre-tested motors and gears to reduce early failures\u003c\/li\u003e\n  \u003cli\u003eStandard electrical connector and mounting holes for bolt-in fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key build features and durability benefits?\u003c\/h3\u003e\n\u003cp\u003eThe actuator assembly uses a sturdy metal case and components intended to resist wear from repeated locking cycles. An anti-theft design element and quality control checks are included to improve security and longevity compared with units that lack testing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMetal housing and reinforced internal gearing for longer service life\u003c\/li\u003e\n  \u003cli\u003eAnti-theft mechanism integrated to maintain locking integrity\u003c\/li\u003e\n  \u003cli\u003e100% tested before shipment to confirm electrical and mechanical function\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically straightforward for a moderate DIYer or any professional technician—no body modification required when the actuator matches your vehicle’s connector and mounting pattern. Have basic hand tools and a trim panel remover ready, and disconnect the battery before handling electrical components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolts into the factory mounting points, uses existing wiring harness\u003c\/li\u003e\n  \u003cli\u003eRecommended tools: screwdrivers, socket set, trim tool, electrical cleaner\u003c\/li\u003e\n  \u003cli\u003eDisconnect vehicle battery before installation for safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and mechanics restoring central locking to older GM trucks, vans and cars who need a cost-effective, tested replacement for a failed left\/front door actuator. This OGATOO 2-piece set suits owners maintaining classic or work vehicles across the 1985–2005 GM line who prefer OE-style fitment and a durable metal-bodied actuator backed by seller support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include both left and right actuators?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This listing contains two left-side\/front door actuators intended as a matched pair for left-side replacements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it fit my 1999 Chevy Silverado?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Many 1999 Silverado trims are supported, but compare your original part number or connector before ordering to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55165790814551,"sku":"B0DJVS7RD5","price":38.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-front-packaging-left-door-actuator.jpg?v=1790357980"},{"product_id":"ogatoo-abs-front-wheel-speed-sensor-kit-for-chevrolet-avalanche-2002-2006-left-right-oe-fit-dual-pack","title":"OGATOO ABS Front Wheel Speed Sensor Kit for Chevrolet Avalanche (2002–2006) — Left \u0026 Right, OE-fit Dual Pack","description":"\u003cp\u003e\u003cstrong\u003eOGATOO front ABS wheel speed sensor kit replaces both left and right sensors for 2002–2006 Chevrolet Avalanche models, restoring accurate wheel speed readings for your vehicle's ABS and traction systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese direct-fit front wheel speed sensors are manufactured to match OEM specifications for fit and function on compatible Chevrolet and GMC trucks and SUVs. Built with quality materials and tested tolerances, the OGATOO sensors aim to provide a reliable electrical signal to the vehicle’s ABS module so that anti-lock braking and traction control systems can monitor wheel rotation correctly. Before purchasing, verify your vehicle year and part cross-references to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow will replacing the front ABS wheel speed sensors affect braking performance?\u003c\/h3\u003e\n\u003cp\u003eNew sensors supply stable wheel speed data to the ABS control unit so anti-lock and stability systems can react as designed. With accurate inputs, you should see fewer false ABS activations and improved traction control behavior during slippery conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores correct wheel rotation signals to ABS and traction control modules\u003c\/li\u003e\n  \u003cli\u003eReduces intermittent ABS warning lights caused by sensor faults\u003c\/li\u003e\n  \u003cli\u003eHelps prevent unnecessary ABS engagement during normal braking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and OE numbers does this OGATOO sensor kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit covers a wide range of GM trucks and SUVs from roughly 2000–2013 depending on model and axle. Always cross-check the supplied replacement OE numbers with your existing sensor or VIN to confirm fitment before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Avalanche, Silverado, Suburban, Tahoe, Sierra, Yukon XL, Escalade, Hummer H2, Savana models listed in specs\u003c\/li\u003e\n  \u003cli\u003eCross-references include SK970011, 15037208, 5S8357 and several GM part numbers\u003c\/li\u003e\n  \u003cli\u003ePlease verify part compatibility with your vehicle’s year and axle side prior to ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build and warranty details of the OGATOO ABS sensors?\u003c\/h3\u003e\n\u003cp\u003eOGATOO manufactures these sensors to match the dimensions and electrical characteristics of the original equipment to ensure stable operation. The kit includes both left and right front sensors and is backed by a one-year warranty and 24\/7 customer support for defective or damaged items.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to OE tolerances for electrical output and mounting geometry\u003c\/li\u003e\n  \u003cli\u003eDurable housing and connector design for road and weather exposure\u003c\/li\u003e\n  \u003cli\u003e12-month warranty with responsive after-sales assistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I check during fitment?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically requires basic hand tools and about 30–60 minutes per side for an experienced DIYer. Inspect connector pins, wiring harness condition, and mounting holes for corrosion; replace mounting hardware if worn to ensure a secure fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove wheel and brake components as needed for access to the sensor mount\u003c\/li\u003e\n  \u003cli\u003eCompare electrical connector and sensor length to the original part before installing\u003c\/li\u003e\n  \u003cli\u003eEnsure sensor ring and tone wheel are clean and undamaged for accurate readings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This OGATOO front ABS wheel speed sensor pair is intended for owners and mechanics working on compatible Chevrolet, GMC, Cadillac or Hummer trucks and SUVs from the model years listed who need a reliable, cost-effective replacement for failed or intermittent wheel speed sensors. It's suitable for DIY installers and professional shops that require a direct-fit sensor option backed by a limited warranty and customer support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this sensor kit fit my 2004 Chevrolet Silverado 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this OGATOO front sensor kit lists compatibility with 2003–2006 Silverado 1500 models; confirm by matching OE numbers or the existing sensor's connector.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include both left and right front sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the product is sold as a pair covering both left and right front wheel speed sensors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55166135927127,"sku":"B09NFJTQ35","price":37.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-front-abs-sensor-pair-packaging.jpg?v=1790363968"},{"product_id":"ogatoo-abs-wheel-speed-sensors-for-2007-2016-jeep-patriot-front-left-right-pair-oem-fit","title":"OGATOO ABS wheel speed sensors for 2007–2016 Jeep Patriot Front Left \u0026 Right — Pair, OEM-fit","description":"\u003cp\u003e\u003cstrong\u003eHigh-precision OGATOO front-left and front-right ABS wheel speed sensors replace OE units to restore accurate wheel-speed readings on 2007–2016 Jeep Patriot and compatible models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese OEM-fit ABS wheel speed sensors from OGATOO are designed as a direct replacement for the front driver and passenger sensors on 2007–2016 Jeep Patriot and select Compass and Dodge Caliber models. Supplied as a two-piece kit, each sensor uses a 2-pin connector and matches the original mounting and electrical characteristics to ensure reliable communication with the vehicle’s control systems.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers are these sensors compatible with?\u003c\/h3\u003e\n\n\u003cp\u003eOGATOO sensors cover a range of compact Jeep and Dodge vehicles with 2.0L and 2.4L engines plus specific Dodge Caliber trims. Always verify fitment against your vehicle’s VIN or existing part numbers before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Jeep Patriot and Compass 2.0L L4 and 2.4L L4, model years 2007–2016.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Dodge Caliber 1.8L L4 for 2007–2009 model years.\u003c\/li\u003e\n  \u003cli\u003eReplacement OE numbers: 5105573AA, 5105573AB, 5105572AA, 5105572AB.\u003c\/li\u003e\n  \u003cli\u003eSold as a pair for front left and front right positions; connector: 2 pins.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these sensors perform compared with the original equipment parts?\u003c\/h3\u003e\n\n\u003cp\u003eOGATOO manufactures these sensors to meet the same fit, form and function as the factory components. Materials and electrical specs are matched to provide stable wheel-speed signals under varied driving conditions without costly modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to OEM tolerances for direct fitment and simple installation.\u003c\/li\u003e\n  \u003cli\u003eDurable housings and connectors to resist road grime and moisture.\u003c\/li\u003e\n  \u003cli\u003eAccurate wheel-speed output for dependable vehicle system communication.\u003c\/li\u003e\n  \u003cli\u003ePackaged as two sensors so both front sides are replaced at once.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation follows standard front-wheel sensor replacement steps and is compatible with original mounting locations and harnesses. No special programming is required in most cases; simply remove the old sensors, install the OGATOO units, and secure the electrical connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement design uses existing mounting bolts and brackets.\u003c\/li\u003e\n  \u003cli\u003eTwo-pin connectors match factory harnesses—no splicing typically needed.\u003c\/li\u003e\n  \u003cli\u003eInspect mounting surface and harness for damage before installation.\u003c\/li\u003e\n  \u003cli\u003eIf a diagnostic warning remains, check for related faults or harness issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support does OGATOO provide?\u003c\/h3\u003e\n\n\u003cp\u003eOGATOO backs these ABS wheel speed sensors with a 12-month warranty and 24\/7 after-sale support to address any arrival damage or early failures. Contact customer service with order details if you receive a defective item.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-month limited warranty from OGATOO against manufacturing defects.\u003c\/li\u003e\n  \u003cli\u003eResponsive customer support for replacements or troubleshooting.\u003c\/li\u003e\n  \u003cli\u003eCarefully packaged to minimize transit damage; inspect on receipt.\u003c\/li\u003e\n  \u003cli\u003eReturns handled per seller policy—save original packaging for claims.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This two-piece OGATOO ABS wheel speed sensor kit is aimed at DIY mechanics, independent repair shops and owners of Jeep Patriot, Compass or Dodge Caliber vehicles who need a dependable front-left and front-right replacement that mirrors OEM specifications. If you want a direct-fit, reasonably priced sensor pair with clear part-number compatibility and warranty coverage, this kit provides the needed components for timely restoration of wheel-speed sensing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these sensors fit my 2010 Jeep Patriot 2.4L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these OGATOO front sensors cover 2007–2016 Jeep Patriot 2.4L models, but confirm fitment with your VIN or OE numbers first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are both left and right sensors included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the package contains two ABS wheel speed sensors for the front driver and passenger sides.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55166137762135,"sku":"B09NFRW34F","price":39.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-abs-front-pair-packaging.jpg?v=1790364059"},{"product_id":"ogatoo-rear-liftgate-lock-actuator-latch-931-298-metal-construction-anti-theft-for-2002-2009-gm-suvs","title":"OGATOO Rear Liftgate Lock Actuator \u0026 Latch 931-298 — Metal Construction, Anti-Theft for 2002–2009 GM SUVs","description":"\u003cp\u003e\u003cstrong\u003eOGATOO 931-298 is a direct-fit rear liftgate lock actuator and latch assembly designed to restore secure opening and closing of your vehicle's tailgate.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your SUV's rear hatch no longer locks or opens reliably, a worn or broken actuator and latch can be the source. This OGATOO replacement unit is built to match original equipment fitment for select GMC, Chevy, Isuzu, Oldsmobile, Saab and Buick models from the early-to-mid 2000s, offering robust metal construction and an anti-theft mechanism to bring back dependable trunk operation and peace of mind.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this tailgate latch assembly fit?\u003c\/h3\u003e\n\u003cp\u003eThis OGATOO 931-298 tailgate lock is engineered to fit a range of GM-based SUVs and a few sister-brand models from the 2002–2009 era. It targets rear hatch applications where the original part numbers match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2002–2009 GMC Envoy (including 2002–2006 Envoy XL)\u003c\/li\u003e\n  \u003cli\u003e2004–2005 GMC Envoy XUV\u003c\/li\u003e\n  \u003cli\u003e2002–2009 Chevy Trailblazer (including 2002–2006 Trailblazer EXT)\u003c\/li\u003e\n  \u003cli\u003e2003–2006 Isuzu Ascender, 2002–2004 Oldsmobile Bravada, 2005–2009 Saab 9-7x, 2004–2007 Buick Rainier\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers 931-298, 931298, 15110511, 15159269\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the OGATOO actuator improve security and reliability?\u003c\/h3\u003e\n\u003cp\u003eThe replacement latch assembly uses solid metal components and a locking mechanism designed to reduce unwanted access and restore consistent latch engagement. It prevents common failure modes such as sticking, incomplete latching, or electronic actuation faults that can compromise cargo security.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAnti-theft mechanism integrated to deter forced entry\u003c\/li\u003e\n  \u003cli\u003eDurable metal construction for long service life\u003c\/li\u003e\n  \u003cli\u003eEngineered to match OEM mounting points and linkages\u003c\/li\u003e\n  \u003cli\u003e100% tested before shipping to ensure functional reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what should I check before fitting?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for someone comfortable with basic vehicle trim removal and fastener work; it follows the original mounting and wiring connections. Before fitting, confirm compatibility with your vehicle's driver door lock and wiring to ensure the new actuator integrates correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare OE numbers and vehicle year\/model before purchase\u003c\/li\u003e\n  \u003cli\u003eInspect driver door lock function—OEM-standard locking aids proper operation\u003c\/li\u003e\n  \u003cli\u003eTypical install requires removing interior tailgate trim and unbolting the old latch\u003c\/li\u003e\n  \u003cli\u003eReconnect wiring harness and test latch engagement before reassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the durability and warranty details?\u003c\/h3\u003e\n\u003cp\u003eOGATOO constructs this liftgate lock from high-quality metal to withstand repeated use and resist wear. The unit is tested to meet or exceed original standards, and the seller provides customer support and a warranty response process should issues arise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSturdy metal housing for improved longevity\u003c\/li\u003e\n  \u003cli\u003ePre-shipment functional testing guarantees performance\u003c\/li\u003e\n  \u003cli\u003eSeller support available for installation or warranty questions\u003c\/li\u003e\n  \u003cli\u003ePrompt replacement or assistance promised if defects occur\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This OGATOO 931-298 tailgate lock actuator is intended for owners and mechanics replacing a failing rear hatch latch on compatible GMC, Chevy, Isuzu, Saab, Oldsmobile or Buick SUVs from the specified years. Choose this part if you need a direct-fit replacement that restores secure trunk operation, matches OE fitment numbers, and offers stronger metal construction with anti-theft features.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace OE part number 15110511?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This OGATOO unit replaces OE numbers 931-298, 931298, 15110511, and 15159269.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install it myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if you can remove tailgate trim and reconnect a wiring harness; otherwise a mechanic can complete installation quickly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55166358356311,"sku":"B0DJVMNFZN","price":35.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-tailgate-lock-front-assembly.jpg?v=1790367136"},{"product_id":"ogatoo-rear-right-door-lock-latch-actuator-for-honda-cr-v-2007-2011-direct-fit-oe-replacement","title":"OGATOO Rear Right Door Lock Latch Actuator for Honda CR-V 2007-2011 — Direct-Fit, OE Replacement","description":"\u003cp\u003e\u003cstrong\u003eOGATOO Rear Right Passenger Door Lock Latch Actuator is a direct-fit replacement for 2007–2011 Honda CR-V models that restores reliable locking and anti-theft function.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf the rear right passenger door on your Honda CR-V no longer locks or unlocks smoothly, a failed actuator is often the culprit. This OGATOO assembly replaces OE numbers 72610-SWA-A01 \/ 72610SWAA01 (DLA1006) and is engineered to match factory fit and function so you can restore normal door operation without unnecessary modification.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this actuator fix my door lock problems?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn actuator resolves intermittent or total loss of electronic locking at the rear right door. The unit moves the latch mechanism when you press the key fob, use the interior switch, or operate the manual lock, returning consistent response and secure closure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for Honda CR-V 2007–2011 — no drilling or splicing.\u003c\/li\u003e\n  \u003cli\u003eRestores electrical lock\/unlock commands from fob and cabin controls.\u003c\/li\u003e\n  \u003cli\u003eReplaces OE part numbers for correct alignment and connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes OGATOO’s right rear door lock durable and secure?\u003c\/h3\u003e\n\u003cp\u003eThis actuator uses robust metal components and factory-grade materials to withstand repeated cycles and resist premature failure. The assembly includes anti-theft features compatible with the vehicle’s locking system to maintain security after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality metal parts for improved longevity under daily use.\u003c\/li\u003e\n  \u003cli\u003eAnti-theft latch design preserves the vehicle’s factory security.\u003c\/li\u003e\n  \u003cli\u003eManufacturing tests confirm electrical and mechanical function before shipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my specific CR-V and replace the OE number I have?\u003c\/h3\u003e\n\u003cp\u003eOGATOO’s rear right door latch actuator is made to match the OEM dimensions and connectors of the listed years and OE codes. It’s intended as a plug-and-play replacement for the specified part numbers, ensuring correct fit and operation when matched to compatible models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Honda CR-V model years 2007, 2008, 2009, 2010, 2011.\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for 72610-SWA-A01, 72610SWAA01, DLA1006.\u003c\/li\u003e\n  \u003cli\u003eConnector and mounting points match factory locations for straightforward swap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable is the product and what support is available after purchase?\u003c\/h3\u003e\n\u003cp\u003eEach OGATOO actuator is inspected during production to ensure consistent performance. The product is backed by a 12-month support commitment and the manufacturer offers assistance for installation questions or warranty claims.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory-tested units to reduce early-failure risk.\u003c\/li\u003e\n  \u003cli\u003e12-month support\/warranty period for buyer protection.\u003c\/li\u003e\n  \u003cli\u003eCustomer service available for fitment or troubleshooting help.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This part is intended for Honda CR-V owners, independent mechanics, and service shops that need a dependable, OEM-compatible rear right passenger door lock actuator for 2007–2011 models. It’s ideal when the existing actuator exhibits intermittent locking, fails to respond to the key fob or interior switch, or when the latch mechanism no longer secures the door properly. Buy this OGATOO replacement when you want a straightforward, tested solution that preserves the vehicle’s original locking behavior and security features.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this actuator fit my 2009 Honda CR-V?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This OGATOO rear right actuator is compatible with 2007–2011 Honda CR-V models and replaces OE 72610-SWA-A01.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the part plug-and-play or does it need modification?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s designed as a direct-fit replacement with matching connectors and mounting points—no cutting or splicing required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55167238177111,"sku":"B0CNQQXZWN","price":40.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-rear-right-door-lock-actuator-front-view.jpg?v=1790379580"},{"product_id":"ogatoo-3-double-face-pedestal-fender-led-light-2-pack-amber-red-dual-color-ip65-sealed-stop-turn-tail","title":"OGATOO 3\" Double-Face Pedestal Fender LED Light 2-Pack — Amber\/Red Dual-Color, IP65 Sealed Stop\/Turn\/Tail","description":"\u003cp\u003e\u003cstrong\u003eOGATOO's 3-inch double-face pedestal fender light is a two-pack LED stop\/turn\/tail lamp designed for trailers and heavy trucks that offers bright dual-color signaling with a compact, sealed housing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact round lamp combines amber and red LEDs behind a clear polycarbonate lens to deliver visible stop, turn and running lights from either side of the pedestal. Built for 12V systems, the unit features 30 sealed LED chips (15 amber + 15 red), an IP65 water-resistant rating and a simple three-wire pigtail for fast installation. The low-profile 3.0-inch diameter makes it suitable for fenders, pedestals and rear mounts on semi trucks, trailers, RVs and towing setups.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright and durable is this LED pedestal light?\u003c\/h3\u003e\n\u003cp\u003eThe light uses multiple sealed LED beads that consume little current while producing a strong, crisp signal. A polycarbonate lens resists impact and yellowing, and the IP65 rating protects the internals from rain and road spray.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e30 total LEDs: 15 amber + 15 red for clear color separation\u003c\/li\u003e\n  \u003cli\u003ePolycarbonate clear lens for impact and UV resistance\u003c\/li\u003e\n  \u003cli\u003eIP65 water-resistant sealing to withstand wet conditions\u003c\/li\u003e\n  \u003cli\u003eLow current draw and reduced heat output compared with incandescent bulbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my trailer or truck, and is it easy to wire?\u003c\/h3\u003e\n\u003cp\u003eThe light is built for 12V DC electrical systems and accepts a standard three-prong style connection. The pigtail is color-coded so you can match ground, tail and brake\/turn wires quickly, making retrofit or replacement straightforward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDimensions: 3.0 x 3.0 inch (7.6 x 7.6 cm) round housing\u003c\/li\u003e\n  \u003cli\u003eWiring: white = ground, gray = running\/tail, red = stop\/turn\/high brightness\u003c\/li\u003e\n  \u003cli\u003eCompatible with common trailer and truck wiring harnesses\u003c\/li\u003e\n  \u003cli\u003eIncludes two lights so you can replace both sides or keep a spare\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this light serve multiple rear lighting functions?\u003c\/h3\u003e\n\u003cp\u003eYes — its dual-face LED layout lets the lamp operate as a tail\/running light at low brightness and a stop\/turn signal at higher intensity. That multi-function capability reduces the need for separate lamps and keeps rear profiles tidy on trailers and trucks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFunctions: running\/tail, stop\/brake, and turn signaling\u003c\/li\u003e\n  \u003cli\u003eDual-brightness LEDs give distinct visibility levels for each function\u003c\/li\u003e\n  \u003cli\u003ePedestal-friendly design suitable for fenders, pedestals, and rear mounts\u003c\/li\u003e\n  \u003cli\u003eClear lens with amber\/red LED colors for regulatory-compliant signaling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat support and warranty come with my purchase?\u003c\/h3\u003e\n\u003cp\u003eOGATOO provides a 12-month limited warranty and customer support for defective or damaged units received in delivery. Their service team is available to troubleshoot wiring, compatibility or performance issues and to arrange replacements if covered by warranty.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer warranty: 12 months\u003c\/li\u003e\n  \u003cli\u003e24\/7 after-sale customer support for damaged or faulty items\u003c\/li\u003e\n  \u003cli\u003eReplacement or assistance available when product issues qualify\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The OGATOO 3-inch double-face pedestal fender light set is aimed at fleet managers, truck owners, trailer builders and RV\/tow vehicle owners who need compact, multi-function rear lighting with low power consumption and weather resistance. If you want a reliable, easy-to-install stop\/turn\/tail solution for semi trucks, trailers, campers or towing rigs that reduces clutter and improves rear visibility, this two-pack is a practical option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this light compatible with 12V trailer systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The OGATOO light is designed for 12V DC systems and accepts common three-prong trailer connections.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the lens resist water and road spray?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The unit is IP65 rated and features sealed LEDs and a polycarbonate lens for weather resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55167247712599,"sku":"B09QRW14D8","price":46.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatOO-front-face-clear-lens.jpg?v=1790380090"},{"product_id":"ogatoo-coolant-thermostat-housing-assembly-for-2-4l-jeep-chrysler-dodge-2013-2022-194-f-thermostat-aluminum","title":"OGATOO Coolant Thermostat Housing Assembly for 2.4L Jeep Chrysler Dodge (2013–2022) — 194°F Thermostat, Aluminium","description":"\u003cp\u003e\u003cstrong\u003eOGATOO coolant thermostat housing assembly is a direct-fit aluminum replacement for 2.4L Jeep, Chrysler, Dodge and related models that restores sealed coolant flow and correct temperature regulation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis thermostat housing kit is designed specifically for 2.4L engines used in Jeep Cherokee, Compass, Renegade, Chrysler 200, Dodge Dart, Fiat 500X and Ram ProMaster City model years roughly 2013–2022. The assembly arrives complete with a 194°F thermostat, rubber seal and temperature sensor, and replaces multiple factory part numbers so you can quickly restore your vehicle’s cooling performance. Built from corrosion-resistant aluminum and tested for thermal and vibration durability, the housing helps stop coolant leaks and supports consistent engine temperatures.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this OGATOO thermostat housing fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit fits many 2.4L 4-cylinder models across Jeep, Chrysler, Dodge, Fiat and Ram lines produced between about 2013 and 2022. Always confirm fitment by matching your original part number, mounting pattern and sensor ports before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eJeep Cherokee: 2014–2022\u003c\/li\u003e\n  \u003cli\u003eJeep Compass: 2017–2022; Renegade: 2015–2021\u003c\/li\u003e\n  \u003cli\u003eChrysler 200: 2015–2017; Dodge Dart: 2013–2016\u003c\/li\u003e\n  \u003cli\u003eFiat 500X: 2016–2018; Ram ProMaster City: 2015–2022\u003c\/li\u003e\n  \u003cli\u003eReplaces factory PN examples: 5047263AB\/AC, 5047772AB, 5047861AA\/AB\/AC\/AD\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this housing restore cooling system performance?\u003c\/h3\u003e\n\u003cp\u003eThe housing secures the thermostat and routes coolant through the engine and heater core, so replacing a failed unit restores sealed fluid flow and correct opening temperature behavior. A leak-free, properly routed housing prevents overheating and avoids loss of cabin heat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes a 194°F thermostat to match factory control points\u003c\/li\u003e\n  \u003cli\u003eRubber seal and sensor port included for complete reassembly\u003c\/li\u003e\n  \u003cli\u003eAluminum construction resists corrosion and heat cycling\u003c\/li\u003e\n  \u003cli\u003eFour mounting holes for secure, OE-style fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat symptoms indicate the housing needs replacement?\u003c\/h3\u003e\n\u003cp\u003eSymptoms of a failing thermostat housing are often straightforward: visible coolant leaks, inconsistent temperature readings, or heater performance problems. Replacing the housing addresses these issues and reduces the risk of engine damage from overheating.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExternal coolant leak around housing or lower radiator hose\u003c\/li\u003e\n  \u003cli\u003eEngine running hotter than normal or overheating events\u003c\/li\u003e\n  \u003cli\u003ePoor cabin heating or extended engine warm-up times\u003c\/li\u003e\n  \u003cli\u003eCheck engine or coolant warning lights related to temperature\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and durability?\u003c\/h3\u003e\n\u003cp\u003eThis assembly is supplied new, fully equipped with gasket and temperature sensor, and is intended for professional or experienced DIY installation. OGATOO tests the housing for resistance to heat, coolant exposure and vibration, and the kit carries a 1-year warranty for added confidence.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended for installation by qualified mechanics or experienced DIYers\u003c\/li\u003e\n  \u003cli\u003eComes with gasket\/seal and pre-sized thermostat for easier replacement\u003c\/li\u003e\n  \u003cli\u003eConstructed from heat-resistant, corrosion-proof aluminum\u003c\/li\u003e\n  \u003cli\u003e1-year limited warranty and after-sales support from OGATOO\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This OGATOO thermostat housing assembly is aimed at owners and technicians working on 2.4L Jeep, Chrysler, Dodge, Fiat and Ram vehicles who need a reliable, direct-fit replacement to stop leaks and restore proper engine temperature control. If your vehicle shows coolant leaks, erratic temperature readings, poor heating, or you’re rebuilding the cooling system, this complete housing kit provides the parts and specifications to get the cooling circuit operating correctly again.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace my original part number?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It replaces common OEM numbers such as 5047263AB\/AC and 5047861AA–AD; verify your vehicle's part number first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the thermostat included and what temperature does it open?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes a 194°F thermostat, plus a rubber seal and temperature sensor.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55167299453271,"sku":"B0GDFML5R4","price":42.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-front-housing-assembly.jpg?v=1790382113"},{"product_id":"ogatoo-front-right-door-lock-latch-actuator-for-honda-crv-2007-2011-passenger-side-oem-fit-durable","title":"OGATOO Front Right Door Lock Latch Actuator for Honda CRV 2007-2011 — Passenger Side, OEM Fit \u0026 Durable","description":"\u003cp\u003e\u003cstrong\u003eOGATOO's front right (passenger side) door lock latch actuator for Honda CRV restores reliable locking and unlocking for 2007–2011 models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf the passenger door on your CRV no longer responds to the central lock, sticks when opening, or causes intermittent security alerts, a worn actuator is often the culprit. This OGATOO replacement is engineered to match the original fit and function for Honda OE numbers DLA1015, 72110-SWA-D01 and equivalents, so installation and operation mirror the factory part.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this actuator fix common door lock problems?\u003c\/h3\u003e\n\u003cp\u003eThis unit replaces a failing motorized latch assembly that can cause doors not to lock or unlock properly, strange noises, or inconsistent electronic response. By restoring the actuator’s mechanical movement and electrical connections, door operation becomes smooth and predictable again.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for front right passenger side on 2007–2011 Honda CRV models\u003c\/li\u003e\n  \u003cli\u003eRestores motorized lock function and resolves intermittent connection faults\u003c\/li\u003e\n  \u003cli\u003eStops grinding or clicking sounds associated with worn actuators\u003c\/li\u003e\n  \u003cli\u003eRe-establishes reliable remote and manual locking\/unlocking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the OGATOO latch assembly a durable option?\u003c\/h3\u003e\n\u003cp\u003eOGATOO constructs the latch with high-quality metal components and tested mechanisms to withstand repeated use and environmental exposure. The design aims for longevity by matching OEM tolerances, reducing wear on mating parts, and resisting corrosion where possible.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid metal internal components for consistent mechanical strength\u003c\/li\u003e\n  \u003cli\u003eFactory testing to meet or exceed original part standards\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion finishes and robust gears for longer service life\u003c\/li\u003e\n  \u003cli\u003ePre-tested electrical connections to lower early failure risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my vehicle and replace the original OE numbers?\u003c\/h3\u003e\n\u003cp\u003eThis actuator is manufactured to be compatible with the specified OE numbers and Honda CRV model years listed. Confirm fit by comparing the OE numbers (DLA1015, 72110-SWA-D01, 72110SWAD01, 72110TA0A11, 72110-TA0-A11) or visually matching the connector and mounting points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to replace listed OE reference numbers for direct swap\u003c\/li\u003e\n  \u003cli\u003eFits 2007, 2008, 2009, 2010 and 2011 Honda CRV front right passenger doors\u003c\/li\u003e\n  \u003cli\u003eSame connector and bracket positions for straightforward installation\u003c\/li\u003e\n  \u003cli\u003eRecommended for owners noticing security or locking inconsistencies\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat support and warranty come with this OGATOO part?\u003c\/h3\u003e\n\u003cp\u003eEach actuator is 100% tested at the factory and backed by a 12-month warranty to protect against manufacturing defects. OGATOO also offers customer support to help with fitment questions or troubleshooting after purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory-tested before shipping to ensure proper operation\u003c\/li\u003e\n  \u003cli\u003e12-month warranty covering defects and premature failures\u003c\/li\u003e\n  \u003cli\u003eCustomer service available for fitment or installation guidance\u003c\/li\u003e\n  \u003cli\u003eClear replacement guidance to reduce installation time and errors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This OGATOO front right passenger door lock latch actuator is intended for Honda CRV owners, DIY mechanics, and independent repair shops replacing a failing or noisy passenger-side actuator on 2007–2011 models. If your CRV exhibits unreliable locking behavior, audible actuator noise, or does not respond to remote locking, this direct-fit replacement offers a cost-effective way to restore proper door security and operation without modifying the vehicle’s original hardware.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this actuator work with my 2010 Honda CRV?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits 2007–2011 Honda CRV front right passenger doors and replaces the listed OE numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does OGATOO provide a warranty on this part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The actuator is factory-tested and comes with a 12-month warranty against defects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55167308038487,"sku":"B0CNQR8BLV","price":41.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-front-right-door-latch-assembly-front-view.jpg?v=1790382551"},{"product_id":"ogatoo-camshaft-position-sensor-2-pack-5149141af-compatible-direct-fit-heat-resistant","title":"OGATOO Camshaft Position Sensor 2-Pack (5149141AF Compatible) Direct-Fit, Heat-Resistant","description":"\u003cp\u003e\u003cstrong\u003eThe OGATOO 2-pack camshaft position sensors (OEM 5149141AF compatible) are direct-replacement sensors that restore accurate camshaft timing signals to your engine control unit for smoother starting, better idling, and reliable performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Chrysler, Dodge, Jeep, Ram or compatible vehicle is showing rough idle, check-engine codes related to camshaft position (for example P0340\/P0345), intermittent stalling, or sluggish acceleration, these plug-and-play sensors can be a straightforward repair. Each sensor in this twin pack is engineered to match original mounting points and connector types so mechanics and DIYers can swap them without programming in most applications. OGATOO builds the housings and terminals to resist heat, oil and vibration for lasting service under typical engine conditions.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will these sensors fit?\u003c\/h3\u003e\n\u003cp\u003eThese OGATOO camshaft position sensors are manufactured to be compatible with a broad set of Chrysler, Dodge, Jeep, Ram and related models from 2011–2022. Always cross-check your original sensor’s part number, connector style and mounting pattern before buying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChrysler 200 (2011–2017), 300 (2011–2020), Town \u0026amp; Country (2011–2016), Pacifica (2017–2022), Voyager (2020–2022)\u003c\/li\u003e\n  \u003cli\u003eDodge Avenger (2011–2014), Challenger (2011–2017), Charger\/Durango\/Grand Caravan (2011–2020), Journey (2011–2019) — many 3.6L variants\u003c\/li\u003e\n  \u003cli\u003eJeep Cherokee (2014–2020), Grand Cherokee (2011–2020), Wrangler\/Gladiator\/JK variants (2012–2022 ranges), Ram 1500 and ProMaster models, Volkswagen Routan\u003c\/li\u003e\n  \u003cli\u003eCross-reference OEM numbers: 5149141AF, 907-728, PC950, PC950T, PC929, 2CAM0371 for fit verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these sensors improve engine behavior?\u003c\/h3\u003e\n\u003cp\u003eA camshaft position sensor supplies the engine control unit with the camshaft’s rotational position so ignition timing and fuel injection events are synchronized. A faulty sensor can trigger misfires, poor fuel economy, or hard starts; replacing it restores precise timing inputs to the ECU and helps the engine run more smoothly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores correct camshaft angle signals to reduce misfires and rough idle\u003c\/li\u003e\n  \u003cli\u003eCan clear fault codes related to camshaft position when installed properly\u003c\/li\u003e\n  \u003cli\u003eHelps maintain intended fuel injection timing and acceleration response\u003c\/li\u003e\n  \u003cli\u003eDual-sensor pack provides a spare or covers engines with multiple cam sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and will I need programming?\u003c\/h3\u003e\n\u003cp\u003eOGATOO sensors are designed as direct-fit replacements, matching factory mounting and electrical connector interfaces. In most cases the swap is plug-and-play and requires no ECU reprogramming; basic hand tools and a short service interval are typically all that’s needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement design—no modifications to housing or wiring expected\u003c\/li\u003e\n  \u003cli\u003eInstallation steps: disconnect battery, unplug old sensor, unbolt, swap, reconnect, clear codes if present\u003c\/li\u003e\n  \u003cli\u003eSome vehicles may need code clearing or a short relearn procedure—refer to vehicle service manual\u003c\/li\u003e\n  \u003cli\u003eIf unsure, have a qualified technician verify fit and perform installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and warranty support are included?\u003c\/h3\u003e\n\u003cp\u003eOGATOO constructs these sensors with heat-resistant housings and corrosion-resistant connectors to withstand typical engine bay conditions. Each purchase contains two new sensors and a one-year limited warranty backed by OGATOO customer support for assistance with fitment or defects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-temperature-resistant plastic body and sealed electrical terminals\u003c\/li\u003e\n  \u003cli\u003eCorrosion-proof connector pins to resist oil and moisture exposure\u003c\/li\u003e\n  \u003cli\u003ePackage contains 2x new camshaft position sensors plus warranty coverage\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for installation questions and warranty claims\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The OGATOO 2PCS 5149141AF camshaft position sensors are targeted at owners and mechanics servicing mid-2010s to early-2020s Chrysler, Dodge, Jeep, Ram and related models who need a reliable, ready-to-install replacement. Choose this set if you want an OEM-compatible sensor pair for routine repairs, to replace a failing CMP that triggers engine codes or drivability issues, or to keep a spare sensor on hand for vehicles that use dual cam sensors.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this sensor require ECU programming after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most applications are plug-and-play and need no programming; some models may require clearing codes or a short relearn—check your vehicle manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm this is the correct part for my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare your old sensor’s part number, connector style and mounting pattern to the listed OEM references before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55167313150295,"sku":"B0FZKDXR24","price":41.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-front-packaging-camshaft-sensor.jpg?v=1790382800"},{"product_id":"ogatoo-rear-liftgate-lock-actuator-trunk-latch-for-2007-2011-cr-v-2009-2011-pilot-oe-fit-metal-construction","title":"OGATOO Rear Liftgate Lock Actuator Boot Latch for 2007-2011 CR-V \u0026 2009-2011 Pilot — OE-fit Metal Construction","description":"\u003cp\u003e\u003cstrong\u003eOGATOO rear liftgate lock actuator (replaces 74800-SMG-G01) is a drop-in trunk latch assembly that restores secure locking and smooth operation to the rear hatch on compatible Honda CR-V and Pilot models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement liftgate lock actuator is engineered to match OE fit and function for selected 2007–2011 Honda CR-V (2.4L L4) and 2009–2011 Honda Pilot (3.5L V6) vehicles. Built from durable metal components and tested to meet original performance, the unit resolves common symptoms of a failing rear hatch latch—such as intermittent locking, stuck trunk release, or a hatch that won’t stay closed—so you can regain everyday convenience and vehicle security.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this actuator improve my rear hatch performance?\u003c\/h3\u003e\n\u003cp\u003eInstalling a new OGATOO liftgate lock actuator replaces worn gears and weakened mechanisms that cause unreliable locking or incomplete latching. The result is a firmer, consistent catch and dependable electronic actuation when using the key fob or interior release.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores consistent lock\/unlock response from key fob and door controls\u003c\/li\u003e\n  \u003cli\u003eEliminates intermittent hatch release or failure to latch\u003c\/li\u003e\n  \u003cli\u003eMetal construction resists wear and extends service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this fit?\u003c\/h3\u003e\n\u003cp\u003eThis trunk latch assembly is designed to replace OE part numbers 74800-SMG-G01 and 74800SMGG01 and fit specific Honda models. Confirm compatibility by checking your existing part number and model year before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 2007–2011 Honda CR-V 2.4L L4 (rear gate hatch)\u003c\/li\u003e\n  \u003cli\u003eFits 2009–2011 Honda Pilot 3.5L V6 (tailgate latch assembly)\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement design for the listed OE numbers for easier installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe OGATOO liftgate lock actuator is made to meet or exceed original standards and arrives 100% tested for fitment and basic operation. Basic hand tools and a modest level of DIY skill are typically sufficient; professional installation is recommended if you’re not comfortable removing interior panels or disconnecting electrical connectors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement shape and mounting points for straightforward swap-in\u003c\/li\u003e\n  \u003cli\u003eElectrical connector matches factory harness—no splicing required\u003c\/li\u003e\n  \u003cli\u003eExpect to remove interior hatch trim to access the latch assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this part support vehicle security?\u003c\/h3\u003e\n\u003cp\u003eA damaged or failing rear hatch latch can compromise trunk closure and security; replacing it promptly restores the hatch’s locking integrity. OGATOO includes anti-theft mechanism features to maintain factory-level protection and reduce the risk of unauthorized access.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace worn latch components that may allow forced entry\u003c\/li\u003e\n  \u003cli\u003eAnti-theft design retains standard locking behavior for safety\u003c\/li\u003e\n  \u003cli\u003eHelps ensure driver door lock and hatch work together as intended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This OGATOO rear liftgate lock actuator is intended for owners of compatible Honda CR-V and Pilot vehicles experiencing rear hatch locking issues, technicians performing routine latch repairs, and DIY mechanics seeking an OE-style replacement part. If your hatch sticks, fails to lock, or triggers a trunk-open warning, this actuator is a practical direct-replacement option to restore secure and reliable tailgate operation.\u003c\/p\u003e\n\n\u003cp\u003eWarranty \u0026amp; support: OGATOO provides customer support for installation questions and will respond to reported issues to ensure a satisfactory experience. Verify vehicle fitment carefully and contact the seller if you need assistance matching the OE number before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Honda models does this actuator fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits 2007–2011 Honda CR-V 2.4L and 2009–2011 Honda Pilot 3.5L, replacing OE 74800-SMG-G01.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to splice wires to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the OGATOO actuator uses the factory-style connector for a plug-and-play installation without splicing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55167393694039,"sku":"B0DJVNQ96G","price":40.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-front-assembly-view.jpg?v=1790385643"},{"product_id":"ogatoo-4-double-face-led-pedestal-fender-lights-2-pack-amber-red-48-led-ip65-waterproof","title":"OGATOO 4\" Double-Face LED Pedestal Fender Lights 2-Pack — Amber\/Red, 48-LED, IP65 Waterproof","description":"\u003cstrong\u003eThese OGATOO 4-inch double-face LED pedestal fender lights combine amber and red LEDs to serve as stop, turn, tail and running lights for trailers and heavy trucks.\u003c\/strong\u003e\n\nOGATOO's 2-pack of 4-inch round pedestal lights offers a compact, waterproof LED solution designed for trailers, semis and towing rigs that need clear multi-function signaling. Each lamp houses 48 LEDs (24 amber + 24 red) behind a durable polycarbonate lens, draws low current from a 12V DC supply, and mounts via a stud for a secure fender or pedestal installation.\n\n\u003ch3\u003eHow bright and durable are these lights for highway use?\u003c\/h3\u003e\n\u003cp\u003eThe LEDs are sealed to prevent moisture ingress and produce higher luminous output than comparable incandescent bulbs while using less current. The polycarbonate lens resists impact and UV exposure for long-term clarity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e48 total LEDs (24 amber + 24 red) for clear signaling\u003c\/li\u003e\n  \u003cli\u003eWaterproof rating IP65 for rain and road spray protection\u003c\/li\u003e\n  \u003cli\u003ePolycarbonate lens for impact and UV resistance\u003c\/li\u003e\n  \u003cli\u003eLow current draw and reduced heat compared with incandescent\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat functions does each light perform and how do I wire them?\u003c\/h3\u003e\n\u003cp\u003eThese double-face lights operate as tail\/running lights at lower brightness and as stop\/turn indicators at higher brightness. Wiring uses three pigtail leads: white for ground, gray for tail\/running, and red for stop\/turn\/brake.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTriple-function: running, stop\/turn, and tail lights\u003c\/li\u003e\n  \u003cli\u003eAccepts 3-prong connectors common on 12V trailer systems\u003c\/li\u003e\n  \u003cli\u003eSimple color-coded pigtails for straightforward installation\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard 12V DC vehicle wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my trailer or semi, and how do they mount?\u003c\/h3\u003e\n\u003cp\u003eThe compact 4.0 x 4.0 inch dimensions suit fenders, pedestals and small mounting points on trailers, RVs, UTVs and semi trucks like Peterbilt, Kenworth and Freightliner. Each lamp installs via a stud mount for a secure, vibration-resistant connection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDimensions: 10.2 x 10.2 cm (4.0 x 4.0 inches)\u003c\/li\u003e\n  \u003cli\u003eStud mount design for stable attachment to fenders or pedestals\u003c\/li\u003e\n  \u003cli\u003eWorks as replacement or additional signal\/tail lamp on many vehicle types\u003c\/li\u003e\n  \u003cli\u003eSold as a 2-piece set for left\/right or spare use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kind of warranty and after-sales support does OGATOO provide?\u003c\/h3\u003e\n\u003cp\u003eOGATOO backs these LED pedestal lights with a 24-month warranty and 24\/7 after-sale support to address defects or shipping damage. If a unit arrives faulty, contact OGATOO's customer service for prompt assistance and resolution.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24-month limited warranty coverage\u003c\/li\u003e\n  \u003cli\u003eDedicated customer support available around the clock\u003c\/li\u003e\n  \u003cli\u003eReplacement or service options for defective or damaged items\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for: This 2-pack is intended for truck fleets, owner-operators, trailer owners and DIY mechanics who need compact, energy-efficient multi-function lights that withstand road conditions. Choose OGATOO's pedestal fender lights when you want a weatherproof, easy-to-wire solution that provides clear stop, turn and tail signaling on 12V towing vehicles and heavy trucks.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lights waterproof and road-ready?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They have an IP65 rating and a polycarbonate lens for protection against rain and road spray.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do they work with a standard 12V trailer wiring harness?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They accept 12V DC and use three color-coded wires for ground, tail, and stop\/turn functions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55168326926679,"sku":"B09QRD4NBQ","price":51.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-front-view-amber-red-double-face-light.jpg?v=1790400249"},{"product_id":"ogatoo-power-door-lock-actuator-front-left-driver-side-for-bmw-2007-2019-direct-fit-metal-housing","title":"OGATOO Power Door Lock Actuator Front Left Driver Side for BMW 2007-2019 — Direct-Fit, Metal Housing","description":"\u003cp\u003e\u003cstrong\u003eOGATOO front left (driver side) power door lock actuator is a direct-fit replacement designed to restore reliable locking and unlocking for compatible BMW and MINI models from 2007–2019.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf the driver-door lock on your BMW has started working intermittently, makes unusual noises, or won't lock at all, a failing actuator is a common culprit. This OGATOO unit is manufactured to match OEM dimensions and electrical connections so installation is straightforward for many models including 2-, 3-, 4-, 5-, M- and X-series vehicles and select MINI Countryman years.\u003c\/p\u003e\n\n\u003ch3\u003eWhich BMW and MINI models will this actuator fit?\u003c\/h3\u003e\n\u003cp\u003eThis OGATOO actuator covers a long list of model years and trims—primarily front left\/driver side applications. It replaces several OEM part numbers and is intended for model families including 2 Series, 3 Series, 4 Series, 5 Series, M cars, X1\/X3\/X4\/X5\/X6, and Mini Countryman within the listed years.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits many 2007–2019 BMW and 2011–2019 Mini Countryman variants.\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers such as 51217229455, 51217283627, and others noted by manufacturers.\u003c\/li\u003e\n  \u003cli\u003eVerify compatibility with your VIN or existing actuator reference before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this part restore locking performance?\u003c\/h3\u003e\n\u003cp\u003eThe actuator contains the mechanical and electrical components that move the lock rod when you press the remote or use the interior switch. Replacing a worn or failed actuator eliminates intermittent locks, grinding noises, and failure-to-lock conditions caused by broken gears or burnt motors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNew metal housing and internal gear assembly for consistent operation.\u003c\/li\u003e\n  \u003cli\u003eFactory-tested motor and electrical connector for proper signaling.\u003c\/li\u003e\n  \u003cli\u003eAnti-theft mechanism integrated to maintain security functions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and fitment?\u003c\/h3\u003e\n\u003cp\u003eOGATOO designs this actuator as a direct-fit front left unit so it should install using the factory mounting points and connector. Basic removal of the door panel and careful disconnection of the linkages are required; professional installation is recommended if you’re not comfortable with door trim removal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounts into the driver-side door cavity in place of the original actuator.\u003c\/li\u003e\n  \u003cli\u003eUses the factory electrical plug—no splicing when matched to correct model years.\u003c\/li\u003e\n  \u003cli\u003eCheck link rod orientation and adjust before reassembling the door panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the durability and warranty details?\u003c\/h3\u003e\n\u003cp\u003eThis OGATOO unit is built from metal components and undergoes factory testing to meet or exceed original equipment standards. The listing includes a support promise and a 12-month coverage period against manufacturing defects, giving you a safety net after replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust metal construction to resist wear and extend service life.\u003c\/li\u003e\n  \u003cli\u003eFactory-tested electrical and mechanical operation for quality assurance.\u003c\/li\u003e\n  \u003cli\u003e12-month warranty and customer support for replacement or troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This actuator is for BMW and MINI owners, do-it-yourself mechanics, and professional repair shops who need a reliable front left\/driver side door lock replacement. Choose this OGATOO part if your vehicle matches the listed model years and you want a durable, tested actuator that restores proper locking function and preserves factory security features. Always confirm compatibility with your VIN or the old part number before purchase to ensure a correct fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this actuator fit my BMW without modifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your model year and trim appear in the compatibility list and the OEM part number matches, it installs without wiring changes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How can I tell the actuator is failing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Symptoms include intermittent locking, grinding noises from the door, or the door failing to lock\/unlock with the remote.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55168332759383,"sku":"B0CJC3LZ5P","price":48.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-front-left-actuator-front-view.jpg?v=1790400605"},{"product_id":"ogatoo-front-driver-left-door-lock-actuator-for-dodge-ram-1994-2002-direct-fit-oe-replacement-durable","title":"OGATOO Front Driver Left Door Lock Actuator for Dodge Ram 1994–2002 — Direct-Fit OE Replacement, Durable","description":"\u003cp\u003e\u003cstrong\u003eOGATOO's front driver left door lock latch actuator is a direct-fit replacement that restores reliable locking and unlocking on Dodge Ram trucks from 1994 through 2002.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement actuator is engineered to match the form, fit, and function of the factory part for Dodge Ram 1500, 2500, and 3500 models equipped with the specified engines across model years 1994–2002. It replaces OE part numbers including 55075357, 55076077, 55076291, 55076291AB and 931-634 and is manufactured from durable metal and polymer components to withstand repeated use and exposure inside the door cavity.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this actuator improve my truck's door performance?\u003c\/h3\u003e\n\u003cp\u003eInstalling this OGATOO actuator fixes common symptoms of a failing door lock—intermittent locking, stuck locks, or complete loss of lock function—so the driver door operates reliably again. It’s electrically compatible with the original wiring harness and designed to deliver smooth engagement each time you lock or unlock the door.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for driver's left door on 1994–2002 Dodge Ram models.\u003c\/li\u003e\n  \u003cli\u003eCompatible with factory wiring and mounting points—no modification needed.\u003c\/li\u003e\n  \u003cli\u003eSmoother, quieter actuation compared with worn original components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and OE part numbers does this replace?\u003c\/h3\u003e\n\u003cp\u003eThis actuator fits a broad range of Dodge Ram trucks: 1500 (3.9L V6, 5.2L V8, 5.9L V8), 2500 (5.2L V8, 5.9L engines, 8.0L V10), and 3500 (5.9L, 8.0L V10) from 1994 through 2002. The unit is supplied to match legacy OE identifiers so it swaps in easily for several factory options.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCovers Dodge Ram 1500, 2500, and 3500 for years 1994–2002.\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers: 55075357, 55076077, 55076291, 55076291AB, 931-634.\u003c\/li\u003e\n  \u003cli\u003eSpecifically designed for the front driver (left) side door lock assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and secure is the OGATOO door lock actuator?\u003c\/h3\u003e\n\u003cp\u003eThe actuator uses sturdy metal and reinforced plastic components to resist wear from repeated cycles and the damp interior of the door. It includes an anti-theft style mechanism to help maintain secure locking and meets or exceeds common quality benchmarks for aftermarket replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust construction to resist mechanical wear and tear.\u003c\/li\u003e\n  \u003cli\u003eAnti-theft features help preserve vehicle security when installed correctly.\u003c\/li\u003e\n  \u003cli\u003e100% tested before shipping to ensure consistent operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what support is available?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for someone with basic automotive experience: remove the interior door panel, disconnect the old actuator, plug in the replacement, and reassemble. OGATOO provides testing and quality checks before sending the unit and offers customer service to assist if you encounter fit or function questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to match factory mounting points and electrical connector.\u003c\/li\u003e\n  \u003cli\u003eTypical install requires common tools and 30–60 minutes depending on experience.\u003c\/li\u003e\n  \u003cli\u003eSeller support available for fitment or performance questions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This OGATOO front driver left door lock latch actuator is intended for Dodge Ram owners and mechanics who need a reliable, direct-replacement lock actuator for model years 1994–2002. It's ideal for vehicles showing signs of a failing driver-side lock—intermittent operation, inability to lock or unlock the door, or noisy\/slow actuation. Choose this unit if you want a durable aftermarket option designed to restore factory-like locking performance while keeping installation simple and secure.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this actuator fit my 1997 Dodge Ram 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This OGATOO actuator is a direct-fit replacement for 1994–2002 Dodge Ram 1500 models, including 1997, designed for the front driver (left) door.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required—common hand tools and 30–60 minutes of time are usually sufficient for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55168403800407,"sku":"B0DJVTN58W","price":53.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-front-driver-left-actuator-front-view.jpg?v=1790402914"},{"product_id":"ogatoo-front-driver-left-door-lock-latch-actuator-for-toyota-lexus-2014-2022-direct-fit-metal-anti-theft-upgrade","title":"OGATOO Front Driver Left Door Lock Latch Actuator for Toyota Lexus 2014–2022 — Direct-Fit, Metal Anti-Theft Upgrade","description":"\u003cp\u003e\u003cstrong\u003eOGATOO Front Driver Left Side Door Lock Latch Actuator replaces a failing left door lock assembly so your Toyota or Lexus locks and unlocks reliably.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your driver-side door no longer locks with the key fob, or it makes grinding noises and resists actuation, the latch actuator is often the source. This OGATOO replacement unit is engineered to match factory dimensions and electrical connections for a direct swap into many Toyota and Lexus models from roughly 2014 through 2022. It restores electric locking function while improving fit, durability, and theft-deterrent performance compared with a worn original.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this left door actuator work with?\u003c\/h3\u003e\n\u003cp\u003eThis actuator is built to fit a wide range of Toyota and Lexus models across multiple years. Confirm compatibility by checking the vehicle model year and OE part numbers before ordering to ensure correct fit and connector alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eToyota Camry 2018–2021, Corolla 2014–2022, Sienna 2015–2021\u003c\/li\u003e\n  \u003cli\u003eToyota RAV4 2019–2021, Highlander 2013–2021, Prius V 2015–2018\u003c\/li\u003e\n  \u003cli\u003eLexus ES350 2019–2021; various Lexus IS, RC, NX and RX models 2014–2021\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers: 69040-02440, 69040-53130, DLA1423, DLT119\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this replacement improve door locking and security?\u003c\/h3\u003e\n\u003cp\u003eThe OGATOO actuator renews the mechanical and electrical parts responsible for locking and unlocking the driver door. It includes upgraded metal components and an anti-theft mechanism to reduce the chance of forced entry and to prevent intermittent failures common with aged actuators.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores consistent lock\/unlock response with fob and door controls\u003c\/li\u003e\n  \u003cli\u003eMetal construction resists wear and reduces noise during operation\u003c\/li\u003e\n  \u003cli\u003eIntegrated anti-theft feature helps maintain door security\u003c\/li\u003e\n  \u003cli\u003eOE replacement spec for proper alignment and operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed for a direct-fit replacement with the same mounting points and electrical plug as the original. A basic set of hand tools and a moderate level of DIY skill are sufficient; you can also choose professional installation if you prefer not to handle door panels and wiring.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect swap — no custom wiring required if compatible\u003c\/li\u003e\n  \u003cli\u003e100% tested before shipping to verify function\u003c\/li\u003e\n  \u003cli\u003eBasic steps: remove inner door panel, unplug old actuator, bolt in new unit, reconnect and test\u003c\/li\u003e\n  \u003cli\u003eProfessional service recommended if unfamiliar with door panel removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with the actuator?\u003c\/h3\u003e\n\u003cp\u003eOGATOO backs this part with a one-year warranty and customer support via the sales platform messaging system. If any performance issues occur during the warranty window, contact the seller for troubleshooting, replacement, or a satisfactory resolution.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1-year limited warranty covering defects\u003c\/li\u003e\n  \u003cli\u003ePre-shipment functional testing to reduce DOA units\u003c\/li\u003e\n  \u003cli\u003eResponsive customer support through the order platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This OGATOO front left door lock latch actuator is intended for owners or technicians who need a reliable OE-style replacement for Toyota and Lexus driver doors showing intermittent locking, failure to respond to the remote, unusual noises when locking, or visible wear on the existing actuator. Verify fitment against vehicle year and OE numbers before purchase; ideal for DIY installers who want a tested, durable replacement or for repair shops seeking an economical OEM-compatible part.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm this actuator fits my Toyota or Lexus?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your vehicle year\/model and match the OE numbers 69040-02440 or 69040-53130. Review fitment list before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What if the actuator fails after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Contact OGATOO within the 1-year warranty window for troubleshooting, replacement, or a refund via the sales platform.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55168412844375,"sku":"B0DJVPQVDY","price":47.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-front-left-actuator-front-view_a92e8845-cb47-47f9-ae2c-1c8e7f28cd89.jpg?v=1790403210"},{"product_id":"ogatoo-2-pack-52-led-double-face-pedestal-trailer-light-square-amber-red-ip65-waterproof-stud-mount","title":"OGATOO 2-Pack 52-LED Double-Face Pedestal Trailer Light — Square Amber\/Red, IP65 Waterproof, Stud Mount","description":"\u003cstrong\u003eOGATOO’s 2-piece 52-LED double-faced pedestal light is a waterproof, stud-mount trailer lamp that provides stop, turn and tail signaling in one compact square unit.\u003c\/strong\u003e\n\n\u003cp\u003eThis dual-face fender light combines 50 red LEDs with 2 amber side LEDs in a durable polycarbonate housing sized for pedestal or fender mounting. Designed for 12V DC systems, the light accepts a standard 3-prong plug and uses a simple three-wire hookup (white ground, black tail\/run, red stop\/turn) so installation is fast and reliable. IP65-rated sealing and heat-efficient LEDs make it a practical upgrade for trailers, RVs, trucks and towing applications.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright and durable are these lights for road use?\u003c\/h3\u003e\n\u003cp\u003eThe OGATOO pedestal lights use 52 high-efficiency LEDs that deliver bright, consistent illumination while drawing minimal current. The polycarbonate lens resists cracking and discoloration, and the IP65 waterproof rating protects the sealed LED module from rain and road spray.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e52 total LEDs: 50 red frontal LEDs plus 2 amber side LEDs for visibility\u003c\/li\u003e\n  \u003cli\u003eLow power consumption and reduced heat compared to incandescent bulbs\u003c\/li\u003e\n  \u003cli\u003ePolycarbonate lens for impact and UV resistance\u003c\/li\u003e\n  \u003cli\u003eSealed construction rated IP65 against water and dust\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my trailer or truck pedestal mount?\u003c\/h3\u003e\n\u003cp\u003eThe light measures 11.43 x 11.43 x 6.60 cm (4.5 x 4.5 x 2.6 in), making it a compact square option for many pedestal, fender or tail mounting points. It mounts with a stud and accepts common 3-prong trailer plugs, simplifying replacement or new installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact square footprint for pedestal and fender mounting\u003c\/li\u003e\n  \u003cli\u003eStud-mount design for secure attachment\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard 3-prong trailer connectors and 12V DC systems\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play wiring: white ground, black tail, red stop\/turn\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I wire and operate the dual-face function?\u003c\/h3\u003e\n\u003cp\u003eWiring follows a straightforward three-wire scheme: white to ground, black for low-brightness running\/tail light, and red for high-brightness stop and turn signals. The light’s dual-face design allows it to serve as tail, stop, and turn signal from a single housing, reducing the number of separate fixtures needed on your trailer or vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWhite = ground (chassis or negative)\u003c\/li\u003e\n  \u003cli\u003eBlack = tail\/run light (lower brightness)\u003c\/li\u003e\n  \u003cli\u003eRed = stop and turn (full brightness)\u003c\/li\u003e\n  \u003cli\u003eWorks with standard 12V trailer wiring and control circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection and support come with the product?\u003c\/h3\u003e\n\u003cp\u003eOGATOO builds these lights with sealed LEDs and weather-resistant materials to withstand typical road and marine exposure. The lights are backed by a 12-month warranty and 24\/7 after-sale customer support for replacements or troubleshooting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP65-rated sealing against rain and dust ingress\u003c\/li\u003e\n  \u003cli\u003eHeat-efficient LEDs for long life span compared with incandescent lamps\u003c\/li\u003e\n  \u003cli\u003e12-month limited warranty from OGATOO\u003c\/li\u003e\n  \u003cli\u003eCustomer service available for product issues and returns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These OGATOO dual-face pedestal lights are ideal for trailer owners, tow operators, RV and boat enthusiasts, and commercial truck fleets who need a compact, bright, and weatherproof stop\/turn\/tail solution. If you want a plug-compatible 12V replacement that simplifies wiring while improving nighttime visibility, this 2-piece kit suits both DIY installers and professional fitters.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lights compatible with 12V trailer systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are designed for 12V DC systems and accept standard 3-prong trailer plugs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What do I do if a light arrives damaged?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Contact OGATOO support for a replacement—products include a 12-month warranty and 24\/7 after-sale service.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55168427852119,"sku":"B09PKWPPJ5","price":56.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-front-pedestal-light.jpg?v=1790403682"},{"product_id":"ogatoo-door-lock-actuator-for-hyundai-sonata-front-left-driver-2011-2015-oem-fit-anti-theft","title":"OGATOO Door Lock Actuator for Hyundai Sonata Front Left Driver 2011-2015 — OEM Fit, Anti-Theft","description":"\u003cp\u003e\u003cstrong\u003eOGATOO front left door lock actuator replaces the driver-side latch on Hyundai Sonata models (2011–2015) to restore reliable locking and unlocking.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf the driver-side front door on your Sonata is failing to lock, unlock, or respond to keyless entry, replacing the actuator is often the fastest fix. This OGATOO actuator is engineered to match factory fit and function for compatible Sonata trims and model years, using durable materials and anti-theft features to return smooth operation to the front left door.\u003c\/p\u003e\n\n\u003ch3\u003eWill this fit my Hyundai Sonata?\u003c\/h3\u003e\n\u003cp\u003eThis actuator is designed specifically for the front left (driver side) door of Hyundai Sonata model years 2011 through 2015 and fits multiple trims. Check your vehicle’s part numbers or compare to the OE references listed to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2011–2015 Sonata front left driver door\u003c\/li\u003e\n  \u003cli\u003eFits trims including GLS, GL, SE, Hybrid, 2.0T, Limited variants\u003c\/li\u003e\n  \u003cli\u003eOE reference numbers: 81310-3S010, 813103S010, DLA1161, SM2484, SKDLA1161\u003c\/li\u003e\n  \u003cli\u003eVerify at purchase by matching your existing actuator or part code\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this actuator improve door operation?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or failed actuator restores electronic locking and manual latch movement so doors lock and unlock consistently. The OGATOO unit uses robust metal components and tested electronics to reduce failure, friction, and intermittent operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces failing motor and gears that cause sticking or no response\u003c\/li\u003e\n  \u003cli\u003eEngineered for smooth engagement with the door latch assembly\u003c\/li\u003e\n  \u003cli\u003eIncludes anti-theft mechanism to maintain security features\u003c\/li\u003e\n  \u003cli\u003eFactory-tested for reliable performance before shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and durability?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically requires removing the door panel and unplugging the factory connector, then bolting the OGATOO actuator in place. The unit is built from quality metal parts and sealed components to withstand daily use and environmental exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement design for simple swap with OEM mounting points\u003c\/li\u003e\n  \u003cli\u003eDurable metal construction for long service life\u003c\/li\u003e\n  \u003cli\u003eSealed electrical connector to resist moisture and dirt\u003c\/li\u003e\n  \u003cli\u003eComes with a 12-month warranty and factory testing assurance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there safety or security considerations?\u003c\/h3\u003e\n\u003cp\u003eFaulty driver-side actuators can compromise door locking and vehicle security; replacing it restores intended locking function and anti-theft engagement. Ensure the replacement meets OEM standards for fit and locking performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores proper engagement of the front left door lock\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet or exceed original equipment performance\u003c\/li\u003e\n  \u003cli\u003eHelps prevent accidental unlocking or failure to secure the vehicle\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended if unfamiliar with door disassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and technicians who own or service Hyundai Sonata vehicles from 2011 to 2015 and need a dependable, direct-fit replacement for the front left (driver-side) door lock actuator. It’s suited to owners experiencing intermittent locking, deadlock failure, noisy door motors, or complete loss of electronic lock function who want a durable, OE-referenced replacement with a factory-tested warranty.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Sonata years and trims does this actuator fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Hyundai Sonata 2011–2015 front left driver door, including GLS, GL, SE, Hybrid, 2.0T and Limited trims; verify with OE numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the actuator come with a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the OGATOO actuator includes a 12-month warranty and is factory-tested before shipment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55168454492503,"sku":"B0CJC1P3H4","price":49.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-front-left-actuator-packaging.jpg?v=1790404436"},{"product_id":"ogatoo-driver-door-lock-latch-actuator-front-left-2009-2014-direct-fit-metal-anti-theft","title":"OGATOO Driver Door Lock Latch Actuator — Front Left 2009–2014 Direct-Fit Metal, Anti-Theft","description":"\u003cp\u003e\u003cstrong\u003eOGATOO front left (driver side) door lock latch actuator — a direct-fit replacement engineered to restore reliable locking and unlocking for select Ford models from 2009 through 2014.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your driver's door struggles to lock, unlock, or responds inconsistently to the key fob or interior switch, a worn actuator is often the culprit. This OGATOO unit is built to match OEM fitment and function for a range of Ford trucks, SUVs, sedans, and police vehicles from model years 2009–2014 and some later models listed by vehicle compatibility. It replaces specific OE part numbers and comes pre-tested for performance, offering a durable metal construction and an integrated anti-theft mechanism.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Ford vehicles will this front left actuator fit?\u003c\/h3\u003e\n\u003cp\u003eThis actuator is intended for the driver-side (front left) door of several Ford models across multiple years. It covers popular trucks and SUVs as well as sedans and police variants when the listed engine and body combinations apply.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFord F-150 \/ Lobo (2009–2014) with various V6 and V8 engines\u003c\/li\u003e\n  \u003cli\u003eFord Explorer (2011–2019 variants noted in fitment lists)\u003c\/li\u003e\n  \u003cli\u003eFord Mustang, Lincoln Mark LT (2010–2014) where specified\u003c\/li\u003e\n  \u003cli\u003eFord Taurus and Police Interceptor models (2013–2019, including Hybrid and SSV variants)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this OGATOO actuator compare to the original equipment (OE)?\u003c\/h3\u003e\n\u003cp\u003eOGATOO engineered this actuator to meet or exceed the original specifications so installation and performance align with factory expectations. It replaces multiple OE reference numbers and is 100% bench-tested to verify functionality before shipping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OE references such as 9L3Z5421813A, AR3Z6321813A, CR3Z6321813A, CR3Z6321813C, DG1Z5421813A\u003c\/li\u003e\n  \u003cli\u003eMetal construction for improved longevity under repeated use\u003c\/li\u003e\n  \u003cli\u003ePre-tested to reduce the risk of early failure after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key features and security benefits of this driver door actuator?\u003c\/h3\u003e\n\u003cp\u003eBeyond restoring basic lock\/unlock function, the OGATOO actuator includes design elements that support vehicle security and long-term durability. Replacing a damaged actuator promptly helps maintain proper door locking and reduces potential safety or theft risks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAnti-theft mechanism integrated to help maintain security of the driver door\u003c\/li\u003e\n  \u003cli\u003eDurable metal housing intended for heavy-duty use and resistance to wear\u003c\/li\u003e\n  \u003cli\u003eManufactured to match OEM mounting points and electrical connections for easier swapping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what should I expect during replacement?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for someone comfortable with basic door panel removal and electrical connections; no special tools are usually required. The part is designed for a direct swap with original mounting and connectors, but always verify wiring orientation and test operation before reassembling the door trim.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeets or exceeds original standards for fit and function to simplify installation\u003c\/li\u003e\n  \u003cli\u003e100% tested at the factory to ensure proper motor and latch operation\u003c\/li\u003e\n  \u003cli\u003eIf unsure, consult a technician to avoid door panel or electrical damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This OGATOO front left door lock latch actuator is ideal for owners, DIY mechanics, and fleet maintenance teams working on compatible Ford vehicles who need a reliable, OEM-style replacement. It’s targeted at those experiencing inconsistent locking, audible grinding, or complete failure of the driver-side lock mechanism and who want a tested, durable part that restores normal operation and security.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this actuator fit my 2012 Ford F-150 with a 5.0L engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — this OGATOO front left actuator lists compatibility with 2009–2014 F-150 models including 5.0L engines when the vehicle uses the referenced door latch configuration.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the part come pre-tested and ready to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — each OGATOO actuator is 100% tested at the factory and built to match OEM fitment for a direct replacement installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55168520356183,"sku":"B0DJVHSR88","price":51.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-front-left-actuator-front-view_7b3d203c-8021-4e57-84ee-0d99b355c089.jpg?v=1790406468"},{"product_id":"ogatoo-electric-fuel-pump-assembly-for-2007-2013-nissan-altima-l4-2-5l-v6-3-5l-direct-fit-oem-equivalent","title":"OGATOO Electric Fuel Pump Assembly for 2007–2013 Nissan Altima (L4 2.5L \/ V6 3.5L) — Direct-Fit OEM-Equivalent","description":"\u003cp\u003e\u003cstrong\u003eOGATOO Electric Fuel Pump Assembly is a direct-fit replacement for 2007–2013 Nissan Altima L4 2.5L and V6 3.5L models that restores reliable fuel delivery and engine responsiveness.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Altima or compatible Maxima is showing signs of weak acceleration, rough idling, or hard starts, a worn fuel pump may be the cause. This OGATOO assembly is engineered as an OEM-equivalent unit to replace several original part numbers and restore steady fuel pressure and flow. It installs without modification and comes with a one-year warranty and customer support for added confidence.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this fuel pump assembly affect everyday drivability?\u003c\/h3\u003e\n\n\u003cp\u003eReplacing a failing fuel pump with this OGATOO assembly brings back consistent fuel flow and stable pressure, which improves throttle response and smoothness at idle. You should notice fewer hesitations under acceleration and more reliable starts, especially after extended parking.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRestores steady fuel pressure for consistent engine performance\u003c\/li\u003e\n  \u003cli\u003eReduces hesitation, stalling, and rough idling complaints\u003c\/li\u003e\n  \u003cli\u003eImproves throttle response and drivability under load\u003c\/li\u003e\n  \u003cli\u003eCompatible with both L4 2.5L and V6 3.5L engine variants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this unit fit my vehicle and replace the original pump?\u003c\/h3\u003e\n\n\u003cp\u003eThis assembly is designed as a direct replacement for many OEM part numbers and fits 2007–2013 Nissan Altima L4 2.5L and V6 3.5L models; it may also match certain Maxima years. Always confirm your vehicle’s model year and existing part number before purchasing to ensure proper compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect-fit replacement—no cutting or modifications required\u003c\/li\u003e\n  \u003cli\u003eCompatible with listed OEM references and common aftermarket codes\u003c\/li\u003e\n  \u003cli\u003eDesigned to match factory mounting points and electrical connectors\u003c\/li\u003e\n  \u003cli\u003eWorks for Altima and select Maxima model years noted in product details\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key features and materials that affect longevity?\u003c\/h3\u003e\n\n\u003cp\u003eThe OGATOO fuel pump assembly uses precision-engineered components and durable materials intended to withstand regular operating conditions. The pump and internal filter elements are quality-controlled and tested to meet reliable performance expectations, helping reduce premature failures tied to wear or contamination.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-performance pump core for consistent flow rates\u003c\/li\u003e\n  \u003cli\u003eDurable housing and connectors for long-term use\u003c\/li\u003e\n  \u003cli\u003eIntegrated strainer\/filter to protect from debris damage\u003c\/li\u003e\n  \u003cli\u003eManufacturing quality checks and one-year warranty coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what should I prepare?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is intended to be a straightforward swap of the original assembly; the OGATOO unit matches factory connections and mounting hardware locations. Basic mechanical skill and standard tools are required, and following vehicle-specific service instructions keeps the job safe and efficient.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned for direct replacement—no vehicle modifications\u003c\/li\u003e\n  \u003cli\u003eRequires fuel system depressurization and safety precautions\u003c\/li\u003e\n  \u003cli\u003eTypical install time varies by access—plan for moderate DIY or shop labor\u003c\/li\u003e\n  \u003cli\u003eRefer to vehicle repair guide for torque specs and electrical steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This OGATOO Electric Fuel Pump Assembly is aimed at Nissan owners, independent mechanics, and DIYers who need a reliable, OEM-equivalent replacement for 2007–2013 Altima models (L4 2.5L and V6 3.5L) and compatible Maxima years. It’s ideal for drivers experiencing fuel delivery symptoms or anyone restoring a vehicle to dependable daily operation while avoiding aftermarket fitment hassles.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump fit both L4 2.5L and V6 3.5L Altima models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This OGATOO assembly is designed to fit 2007–2013 Nissan Altima L4 2.5L and V6 3.5L models; confirm your vehicle year and part number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is professional installation required?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Not strictly—it's a direct replacement—but fuel system safety steps are needed. If unsure, use a qualified mechanic to avoid damage or injury.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55169174045015,"sku":"B0DRFZRQMV","price":92.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-fuel-pump-front-assembly.jpg?v=1790420030"},{"product_id":"ogatoo-electric-fuel-pump-assembly-for-volkswagen-beetle-1998-2010-l4-1-8l-direct-fit-1-year-warranty","title":"OGATOO Electric Fuel Pump Assembly for Volkswagen Beetle 1998–2010 L4 1.8L — Direct-Fit, 1-Year Warranty","description":"\u003cp\u003e\u003cstrong\u003eThe OGATOO Electric Fuel Pump Assembly E8424M is a direct-fit replacement for 1998–2010 Volkswagen Beetle L4 1.8L engines, restoring stable fuel delivery and reliable starting.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis aftermarket fuel pump assembly is engineered to match OEM fit and function for a wide range of Volkswagen models, offering a straightforward swap for worn or failing pumps. It replaces multiple original part numbers (including 1J0919087H\/J\/D and FP8424M) and supports L4 1.8L applications so you can get back on the road without custom modifications. Built from durable components and backed by a one-year warranty, the assembly focuses on consistent pressure and long-term durability.\u003c\/p\u003e\n\n\u003ch3\u003eWill this pump fit my 1998–2010 Volkswagen Beetle?\u003c\/h3\u003e\n\u003cp\u003eCompatibility covers many Beetle model years and related VW vehicles, but you should confirm your vehicle’s engine code and original part number before purchase. The assembly is intended to replace the listed OEM references and common aftermarket equivalents used across several VW platforms.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Volkswagen Beetle 1998–2010 L4 1.8L (verify engine and VIN)\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers: 1J0919087H\/J\/D, FP8424M, and similar\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with many Golf and Jetta models—confirm year\/engine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eThe OGATOO pump is designed as a direct replacement so installation is typically straightforward for a competent DIYer or professional mechanic. No housing modifications are required; you remove the old module and install the new one using original mounting points and connectors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design — no cutting or custom fabrication\u003c\/li\u003e\n  \u003cli\u003eRequires basic hand tools and a safe fuel-system depressurization\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle service manual for fuel tank removal or in-tank access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance improvements should I expect after replacement?\u003c\/h3\u003e\n\u003cp\u003eReplacing a failing pump restores consistent fuel pressure which helps eliminate issues like hard starting, hesitation under load, and rough idle. While not a performance upgrade part, it returns the vehicle to designed fuel delivery performance for smoother operation and steadier acceleration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores steady fuel flow and engine response\u003c\/li\u003e\n  \u003cli\u003eReduces starting difficulties and mid-throttle hesitation\u003c\/li\u003e\n  \u003cli\u003eHelps maintain designed fuel economy by stabilizing delivery\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality and warranty assurances come with this assembly?\u003c\/h3\u003e\n\u003cp\u003eOGATOO manufactures this replacement using precision components and subjects assemblies to quality control checks so they meet fit and durability expectations. A one-year warranty and customer support provide recourse if installation or part issues arise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed from corrosion-resistant, durable materials\u003c\/li\u003e\n  \u003cli\u003eTested to match OEM flow and pressure characteristics\u003c\/li\u003e\n  \u003cli\u003e1-year warranty and responsive after-sales support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The OGATOO Electric Fuel Pump Assembly E8424M is aimed at Volkswagen Beetle owners (1998–2010) and technicians who need a reliable, direct-replacement pump to restore proper fuel delivery. It’s suitable for DIY mechanics comfortable with fuel-system work and professional shops seeking an OEM-equivalent replacement that covers multiple VW part numbers and related Golf\/Jetta applications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace part number 1J0919087J?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This OGATOO assembly is designed to replace OEM numbers including 1J0919087J and equivalent references.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the pump a direct drop-in or does it require modifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It's a direct replacement designed to install without modifications when matched to the correct vehicle and engine.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55169228800343,"sku":"B0DRFYRZXM","price":87.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-fuel-pump-front-assembly_f56c8631-9331-43cf-9976-6015240aba4e.jpg?v=1790421181"},{"product_id":"ogatoo-power-steering-pump-with-reservoir-for-1996-2014-chevy-gmc-cadillac-direct-replacement-oem-fit","title":"OGATOO Power Steering Pump with Reservoir for 1996–2014 Chevy GMC Cadillac — Direct Replacement, OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eOGATOO 208740 is a brand-new direct-replacement power steering pump with an integrated reservoir designed to restore steering feel and reliability on many 1996–2014 Chevrolet, GMC, Cadillac and compatible Hummer models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement power steering pump is engineered to match OEM fitment and hydraulic performance for select full-size trucks and SUVs. It arrives complete with the reservoir (pulley not included), specific inlet and outlet fittings, and meets strict quality checks so you get quieter, more responsive steering without rebuilding or remanufacturing the entire assembly. Before ordering, confirm your vehicle year, engine, and original part number to guarantee compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWill this pump fit my vehicle and replace the original part?\u003c\/h3\u003e\n\u003cp\u003eOGATOO designed this pump as a precision direct-replacement for many factory part numbers. It lists compatibility across multiple Chevrolet, GMC, Cadillac, Avalanche, Suburban, Tahoe, Sierra, Yukon, Escalade, and Hummer H2 model years.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits models including Chevy Silverado, Tahoe, Suburban, Avalanche; GMC Sierra, Yukon; Cadillac Escalade variants; Hummer H2 in specified years.\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers such as 20-8740, 208740, 15076612, 15234826 and several others found on original units.\u003c\/li\u003e\n  \u003cli\u003eConfirm fit by matching your factory part number and year-range before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connections and components come with the pump?\u003c\/h3\u003e\n\u003cp\u003eThis unit ships brand-new with the reservoir attached but does not include the pulley. Connection types match factory expectations for straightforward installation with common hoses and fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReservoir included for integrated fluid storage and simplified assembly.\u003c\/li\u003e\n  \u003cli\u003eInlet uses a 10mm push-in fitting; outlet is M16×1.5 male threaded.\u003c\/li\u003e\n  \u003cli\u003eNo pulley included—reuse your existing pulley or source a new compatible pulley separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this pump affect steering performance and durability?\u003c\/h3\u003e\n\u003cp\u003eThe pump is hydraulically tested to approximate factory performance, reducing noise and improving responsiveness compared with worn or failing pumps. Its corrosion-resistant construction and quality control testing extend service life versus many older units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-level hydraulic testing for smoother, quieter steering operation.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant materials and precision machining for longer life.\u003c\/li\u003e\n  \u003cli\u003eIntended to address leaks, stiff steering, and worn-hardware symptoms when installed correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and maintenance steps should I follow?\u003c\/h3\u003e\n\u003cp\u003eTo get reliable performance, prepare the steering system before and after installation. Flushing, replacing seals, and bleeding air are essential to prevent premature pump or steering component failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThoroughly flush the power steering system before fitting the new pump.\u003c\/li\u003e\n  \u003cli\u003eReplace old O-rings and seals on high-pressure and return hoses.\u003c\/li\u003e\n  \u003cli\u003eUse the manufacturer-recommended fluid and bleed air by turning the wheel left and right.\u003c\/li\u003e\n  \u003cli\u003eAvoid overtightening mounting bolts; professional installation is recommended if unsure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? OGATOO 208740 is aimed at owners, mechanics, and restoration shops working on late-1990s through mid-2010s full-size Chevy, GMC, and Cadillac trucks and SUVs who need a reliable, new direct-replacement power steering pump with reservoir. It suits drivers seeking an OEM-fit performance restoration—especially those replacing leaking, noisy, or weak steering pumps—while technicians will appreciate the tested hydraulic performance and standard fittings that simplify installation. The product is backed by a one-year warranty and after-sales support to help resolve fitment or function questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump include the pulley?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the OGATOO 208740 includes the reservoir but not the pulley; reuse your original pulley or buy a compatible one.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this a new or remanufactured unit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This product is brand new (not remanufactured) and comes with a one-year warranty and after-sales support.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55170976219479,"sku":"B0FFB15QQ2","price":135.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-208740-front-assembly.jpg?v=1790436078"},{"product_id":"ogatoo-front-left-driver-door-lock-latch-actuator-for-dodge-ram-2003-2010-direct-fit-anti-theft-oe-compatible","title":"OGATOO Front Left Driver Door Lock Latch Actuator for Dodge Ram 2003-2010 — Direct-Fit Anti-Theft, OE-Compatible","description":"\u003cp\u003e\u003cstrong\u003eOGATOO front left (driver side) door lock latch actuator is a direct-fit replacement engineered to restore reliable locking and unlocking for Dodge Ram trucks from 2003 through 2010.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf the driver-side door on your Ram 1500, 2500 or 3500 won't lock or unlock smoothly, a failing latch actuator is a common culprit. This aftermarket OGATOO unit matches the original equipment fit and function for many 2003–2010 Ram models and is built to resist wear, helping you regain power lock performance and vehicle security without a costly dealer visit.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Dodge Ram models and engines is this actuator compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis OGATOO actuator fits a wide range of Ram trucks across the 2003–2010 model years. It supports multiple engine configurations and model variants commonly found on 1500 and 3500 series trucks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2003–2008 Ram 1500: 3.7L V6, 4.7L V8, 5.7L and 5.9L V8 options\u003c\/li\u003e\n  \u003cli\u003e2003–2010 Ram 1500: includes 5.7L, 5.9L, 6.7L L6 and 8.0L V10 where applicable\u003c\/li\u003e\n  \u003cli\u003e2003–2010 Ram 3500: fits 5.7L V8, 5.9L I6, and 8.0L V10 engine versions\u003c\/li\u003e\n  \u003cli\u003eReplaces OE part numbers such as 931-636, 55276791AB\/AC\/AE\/AF\/AG and 55372851AA\/AB, DLA1358\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this actuator improve vehicle security and reliability?\u003c\/h3\u003e\n\u003cp\u003eA worn or damaged driver-side actuator can leave the door unable to lock properly, increasing theft risk and making daily use inconvenient. The OGATOO unit includes an anti-theft mechanism and is manufactured to meet OEM-quality tolerances to restore secure door operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAnti-theft feature to help maintain lock integrity\u003c\/li\u003e\n  \u003cli\u003eDurable metal construction resists breakage under repeated use\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet or exceed original equipment standards\u003c\/li\u003e\n  \u003cli\u003eComprehensive testing before shipment to reduce premature failures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic door panel removal and simple electrical connections. The actuator arrives ready to bolt into the original mounting points and plugs into the existing wiring harness for a fast swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo special tools beyond common hand tools and a trim tool for panels\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design uses OEM mounting locations and connector types\u003c\/li\u003e\n  \u003cli\u003e100% electrical tested—plug-and-play replacement reduces troubleshooting\u003c\/li\u003e\n  \u003cli\u003eSeek professional assistance if unfamiliar with interior door disassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat distinguishes OGATOO’s driver door actuator from cheaper alternatives?\u003c\/h3\u003e\n\u003cp\u003eOGATOO focuses on component strength and tested operation to reduce repeat failures. The actuator uses higher-grade materials and quality checks aimed at delivering consistent lock performance under normal vehicle use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust metal components for improved longevity over plastic-only designs\u003c\/li\u003e\n  \u003cli\u003eFactory-style fit reduces the chance of improper alignment or noise\u003c\/li\u003e\n  \u003cli\u003eBacked by seller support and a responsive warranty process\u003c\/li\u003e\n  \u003cli\u003eMeets OEM reference numbers to ensure compatibility with your Ram\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers and technicians who need a reliable, direct-fit replacement for a failing front left (driver side) door lock actuator on Dodge Ram trucks from model years 2003–2010. Ideal for owners who want OEM-level fit and improved durability without dealer pricing, and for DIYers comfortable removing a door panel or professional installers seeking a tested aftermarket option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this actuator fit my 2006 Ram 1500 with a 5.7L engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This OGATOO front left actuator is compatible with 2003–2008 Ram 1500 models including the 5.7L engine.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to reprogram anything after installing this actuator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No reprogramming is required; it plugs into the existing harness and uses the factory locking system.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55171237347671,"sku":"B0DJVV1DLX","price":48.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-front-left-actuator-front-view_fed90001-245a-46b2-8b74-8acb3cedf057.jpg?v=1790441188"},{"product_id":"ogatoo-electric-fuel-pump-assembly-for-1988-1995-chevy-gmc-c1500-c3500-direct-fit-oem-equivalent-for-5-0l-5-7l-4-3l","title":"OGATOO Electric Fuel Pump Assembly for 1988-1995 Chevy\/GMC C1500–C3500 — Direct-Fit, OEM-Equivalent for 5.0L\/5.7L\/4.3L","description":"\u003cp\u003e\u003cstrong\u003eOGATOO Electric Fuel Pump Assembly is a direct-fit replacement designed to restore reliable fuel delivery for 1988–1995 Chevy and GMC C\/K 1500–3500 trucks with 4.3L, 5.0L, or 5.7L engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your late‑’80s to mid‑’90s Chevrolet or GMC truck is experiencing hard starts, poor acceleration, or rough idling, a worn or failing fuel pump is often the culprit. This OGATOO assembly is built as an OEM-equivalent replacement that matches common original part numbers and installs without modification, letting you return the fuel system to steady performance quickly and affordably.\u003c\/p\u003e\n\n\u003ch3\u003eWill this pump fit my 1988–1995 Chevy or GMC truck?\u003c\/h3\u003e\n\u003cp\u003eYes — the OGATOO pump is made to replace many factory units used in C1500, C2500, C3500 and K-series pickups from 1988 through 1995. It’s cross-referenced to a long list of OEM part numbers so it can match the original equipment on a variety of V6 and V8 fuel systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Chevy\/GMC C1500, C2500, C3500, K1500, K2500, K3500 (1988–1995).\u003c\/li\u003e\n  \u003cli\u003eEngine fits: 4.3L, 5.0L, 5.7L applications commonly found in these trucks.\u003c\/li\u003e\n  \u003cli\u003eCross-references: replaces OEM codes such as E3621S, 66300, P80000S, HP10022 and similar numbers.\u003c\/li\u003e\n  \u003cli\u003ePlease verify your VIN or existing part number before ordering to confirm compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation — do I need special tools?\u003c\/h3\u003e\n\u003cp\u003eThis assembly is engineered for direct replacement so most mechanically competent owners can install it with basic tools. No custom modifications are required; you swap the old pump assembly for the new one and reconnect factory fuel lines and wiring.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design: drops into the original mounting location for a seamless swap.\u003c\/li\u003e\n  \u003cli\u003eTools typically needed: basic hand tools, jack or ramp, safety equipment, possibly a fuel line disconnect tool.\u003c\/li\u003e\n  \u003cli\u003eInstallation time: commonly 1–2 hours depending on access and experience.\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle service manual steps for fuel system depressurization and safety.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and longevity benefits can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe OGATOO pump restores consistent fuel pressure and flow which helps eliminate symptoms caused by aging pumps, like sluggish throttle response and unstable idle. Components are precision-made and tested to meet durability expectations for replacement pumps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStable fuel flow helps improve starting, acceleration, and idle smoothness.\u003c\/li\u003e\n  \u003cli\u003eBuilt from high-quality materials and precision-engineered internals for longevity.\u003c\/li\u003e\n  \u003cli\u003eQuality control and testing are performed to ensure reliable operation.\u003c\/li\u003e\n  \u003cli\u003eIncludes a 1-year warranty and after-sales support for added assurance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich original part numbers does this unit replace?\u003c\/h3\u003e\n\u003cp\u003eThis pump assembly covers many common OEM references so you can often match it to your vehicle’s original part number. That cross-reference helps ensure you receive a compatible, dependable replacement without guessing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM identifiers such as E3621S, 66300, P80000S, HP10022 and related codes.\u003c\/li\u003e\n  \u003cli\u003eAlso listed under alternate numbers like 402-P3621S, SP01A1H, 530-2330 and others.\u003c\/li\u003e\n  \u003cli\u003eUse your current pump’s part number or shop manual to confirm the correct cross-reference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This OGATOO Electric Fuel Pump Assembly is intended for owners, mechanics, and restoration shops working on 1988–1995 Chevy and GMC C\/K series pickups (4.3L, 5.0L, 5.7L). It’s a practical, cost-effective option if you need a dependable, direct-fit replacement to resolve fuel delivery problems while maintaining factory-style installation and serviceability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump fit both Chevy and GMC 1988–1995 trucks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s designed for C\/K 1500–3500 Chevy and GMC pickups from 1988–1995, including common 4.3L, 5.0L, and 5.7L applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is any modification required for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No modifications are required; the OGATOO assembly is a direct OEM-style replacement that installs using factory mounts and connections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":55171327689047,"sku":"B0DRFYZ4ZY","price":86.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ogatoo-front-assembly.jpg?v=1790442630"}],"url":"https:\/\/britishgarage.co.uk\/collections\/ogatoo.oembed","provider":"British Garage","version":"1.0","type":"link"}