{"title":"QYMOTO","description":"\u003cp\u003eBrowse 25 QYMOTO products at British Garage, including motorcycle \u0026amp; atv parts, motorcycle accessories and transmission \u0026amp; drivetrain. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked UK delivery on every order and 30-day returns.\u003c\/p\u003e","products":[{"product_id":"qymoto-ignition-coil-for-mtd-cub-cadet-troy-bilt-951-12220-751-12220-direct-replacement-for-4p90-engines","title":"QYMOTO Ignition Coil for MTD, Cub Cadet \u0026 Troy-Bilt 951-12220\/751-12220 — Direct Replacement for 4P90 Engines","description":"\u003cp\u003e\u003cstrong\u003eThe QYMOTO 951-12220 \/ 751-12220 ignition coil is a direct-replacement coil designed to restore spark and reliable starting on compatible MTD, Cub Cadet, Troy-Bilt, and Craftsman small engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your lawn tractor, walk-behind mower, or yard machine is showing hard starts, intermittent stalling, or no spark at the flywheel, this QYMOTO ignition coil offers a like-for-like replacement to get the engine firing again. Built to match the mounting footprint and electrical connections of OEM part numbers 751-12220 and 951-12220, it fits a wide range of 4P90-series engines used across multiple mower models.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and mower models will this coil fit?\u003c\/h3\u003e\n\u003cp\u003eThis coil is made to replace the OEM 751-12220 and 951-12220 coils and works with many 4P90-series engines. It fits a variety of models from MTD, Cub Cadet, Troy-Bilt, Huskee and Craftsman across walk-behind mowers and lawn tractors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible engine codes: 4P90JHA, 4P90JT, 4P90JU, 4P90JUA, 4P90JUB, 4P90HU, 4P90M0, 4P90MU, 4P90MUA, 4P90MUB\u003c\/li\u003e\n  \u003cli\u003eCommon mower models: Cub-Cadet CC30, CC30H, CC760, CC760ES, CC800; RZT-L34; XT1\/XT2 series; Lawn Tractor RZT-L34\u003c\/li\u003e\n  \u003cli\u003eAlso fits Craftsman LT4200, LT1500 and similar T1000\/T1200 series\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers: 751-12220, 951-12220\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the QYMOTO ignition coil?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard small-engine ignition-coil replacement steps and requires basic hand tools. Remove the engine cover and flywheel shroud, disconnect the spark plug wire and grounding wire, and unbolt the old coil before transferring or aligning the new unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools: socket set, feeler gauge, screwdrivers\u003c\/li\u003e\n  \u003cli\u003eSet air gap to manufacturer spec (typically small millimeter range) before final tightening\u003c\/li\u003e\n  \u003cli\u003eReconnect grounding lead and spark plug wire securely to ensure proper spark\u003c\/li\u003e\n  \u003cli\u003eTest by turning engine over with spark plug removed to check for spark\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe QYMOTO coil is manufactured to provide consistent spark delivery under typical lawn-equipment conditions. While not an OEM-branded part, it’s made to match critical dimensions and electrical properties so engines start reliably when properly installed and gapped.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngine reliability: restores spark for improved starting and steady idle\u003c\/li\u003e\n  \u003cli\u003eConstruction: molded insulation and proper terminal placement for secure connections\u003c\/li\u003e\n  \u003cli\u003ePackage: single ignition coil included — ready to install\u003c\/li\u003e\n  \u003cli\u003eNote: longevity depends on correct installation and engine operating conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The QYMOTO 951-12220 \/ 751-12220 ignition coil is aimed at homeowners, landscapers, and small-engine mechanics who need a cost-effective, drop-in replacement for failed or aging coils on MTD, Cub Cadet, Troy-Bilt, Huskee and compatible Craftsman machines. If you’re troubleshooting no-start, weak-spark, or intermittent-stalling issues on a 4P90-series engine and you’ve confirmed coil failure, this part provides a practical repair option to get your mower back in service.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this coil replace 751-12220 and 951-12220?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — QYMOTO 951-12220\/751-12220 is made to replace both OEM part numbers and fit the same mounting and electrical connections.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation difficult for a home mechanic?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — basic hand tools and attention to the correct air gap make this a straightforward DIY swap for those comfortable with small engines.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55161714639191,"sku":"B09SBCFL4G","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-ignition-coil-front-view.jpg?v=1790331687"},{"product_id":"qymoto-ck100-s-carburetor-for-huayi-98cc-3hp-ohv-engines-adjustable-replacement-with-gaskets-fuel-line","title":"QYMOTO CK100-S Carburetor for Huayi 98cc 3hp OHV Engines — Adjustable Replacement with Gaskets \u0026 Fuel Line","description":"\u003cp\u003e\u003cstrong\u003eThe QYMOTO CK100-S carburetor is an adjustable replacement carb designed to restore and improve fuel delivery for Huayi 98cc (3hp) OHV go-kart and mini-bike engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis purpose-built carburetor fits CK100-S and RB100 go-kart models as well as CT100U and CC100X mini-bikes, replacing OEM part numbers 16100 and 156F. Built by Huayi and distributed under the QYMOTO name, the unit arrives with essential installation hardware so you can swap it in quickly and get back to riding. The design emphasizes durability, serviceability, and simple tuning for reliable everyday performance.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this carburetor affect my engine’s performance?\u003c\/h3\u003e\n\u003cp\u003eInstalling the QYMOTO CK100-S provides more consistent fuel metering compared with a worn or clogged stock carb, which can improve throttle response and reduce stumbling. It’s adjustable so you can fine-tune idle and mixture for prevailing conditions or altitude. Properly tuned, the engine runs smoother and responds better under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores correct air\/fuel ratio for cold and warm starts\u003c\/li\u003e\n  \u003cli\u003eAdjustable idle and main mixture screws for on-the-spot tuning\u003c\/li\u003e\n  \u003cli\u003ePrecision casting and finish to resist leaks and wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my vehicle and what’s included?\u003c\/h3\u003e\n\u003cp\u003eThe CK100-S carburetor is compatible with Huayi 98cc (3hp) OHV engines used on CK100-S and RB100 go-karts, plus CT100U and CC100X mini-bikes. It is supplied as a direct-replacement option for part numbers 16100 and 156F. The package contains everything needed for a basic swap so you won’t have to source multiple small parts separately.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x QYMOTO CK100-S carburetor (Huayi manufactured)\u003c\/li\u003e\n  \u003cli\u003e3 x gaskets to ensure airtight sealing\u003c\/li\u003e\n  \u003cli\u003e1 x fuel line plus 2 clamps for secure hose connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow hard is installation and tuning for a DIYer?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic small-engine maintenance: remove the old carburetor, transfer linkages if needed, mount the new unit with the supplied gaskets, and connect the fuel line. After installation, use the idle and mixture screws for initial tuning—small changes can make a noticeable difference. If you’re unfamiliar with carb tuning, a short online guide or local mechanic can help.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires basic hand tools and a safe work area\u003c\/li\u003e\n  \u003cli\u003eInitial adjustment: set factory-recommended idle, then fine-tune mixture\u003c\/li\u003e\n  \u003cli\u003eCheck for fuel leaks and secure hose clamps before starting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I care for this carburetor to extend its life?\u003c\/h3\u003e\n\u003cp\u003eSimple preventive care keeps the CK100-S working well: use clean fuel, store the vehicle with stabilized fuel if it sits long, and periodically inspect the fuel line and gaskets for wear. If performance deteriorates, remove and clean jets and passages with carb cleaner rather than running the engine hard. The unit’s parts are serviceable, making occasional maintenance straightforward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse fresh, filtered fuel and replace the fuel filter regularly\u003c\/li\u003e\n  \u003cli\u003eClean jets and float bowl if symptoms reappear\u003c\/li\u003e\n  \u003cli\u003eKeep spare gaskets and clamps on hand for faster repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Riders, hobbyists, and small-engine mechanics who own CK100-S or RB100 go-karts or CT100U\/CC100X mini-bikes and need a reliable, adjustable replacement carburetor. It’s aimed at people who want a practical upgrade from a worn OEM unit without complex modifications, plus those who appreciate a kit that includes gaskets and fuel fittings for a quick, complete swap.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carb fit my Huayi 98cc engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It replaces part numbers 16100\/156F and fits CK100-S, RB100 go-karts and CT100U, CC100X mini-bikes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You get one carburetor, three gaskets, one fuel line and two hose clamps for a complete swap.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55161825919319,"sku":"B0C2HJBRD5","price":30.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-ck100s-front-view.jpg?v=1790332547"},{"product_id":"qymoto-recoil-starter-for-coleman-kt196-196-212cc-go-karts-drop-in-replacement-with-rope-and-handle","title":"QYMOTO Recoil Starter for Coleman KT196 \u0026 196–212cc Go-Karts — Drop-In Replacement with Rope and Handle","description":"\u003cp\u003e\u003cstrong\u003eQYMOTO KT196 Pull Start Recoil Starter is a drop-in replacement recoil starter designed to restart Coleman KT196 and many 196–212cc mini-bike and go-kart engines quickly and reliably.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis recoil starter assembly gives you a straightforward mechanical solution when the original pull-start becomes worn, slips, or fails. Built to fit several small-engine models, the QYMOTO unit includes a durable rope, a comfortable grip, and the mounting pattern common to Coleman KT196, Hammerhead 80T, TrailMaster, and compatible Predator 212cc applications. The information below explains fitment, installation basics, and why it’s a practical maintenance part to keep your off-road machine running.\u003c\/p\u003e\n\n\u003ch3\u003eWill this recoil starter fit my engine model?\u003c\/h3\u003e\n\u003cp\u003eThe QYMOTO KT196 recoil starter is engineered to match the bolt pattern and engagement of many 196cc and 212cc small engines commonly used in go-karts and mini bikes. Confirm compatibility by comparing mounting holes and pulley engagement on your old starter to the new unit before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Coleman KT196, CK196-T 200GK, Hammerhead 80T go-kart models.\u003c\/li\u003e\n  \u003cli\u003eWorks with TrailMaster and other off-road go-karts using the same starter pattern.\u003c\/li\u003e\n  \u003cli\u003eAlso used as a replacement on some Predator 212cc and similar engines when fitment matches.\u003c\/li\u003e\n  \u003cli\u003eCheck pictures and measurements to verify bolt spacing and flywheel engagement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation for a DIY mechanic?\u003c\/h3\u003e\n\u003cp\u003eInstallation is generally straightforward for anyone comfortable with basic small-engine work and hand tools. You’ll remove the old recoil assembly from the engine cover, transfer any needed hardware, and mount the QYMOTO starter in its place, ensuring the pawls engage the flywheel correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequired tools: socket set, screwdrivers, and possibly a torque wrench for fasteners.\u003c\/li\u003e\n  \u003cli\u003eTypical install time: 15–45 minutes, depending on access and experience.\u003c\/li\u003e\n  \u003cli\u003eInspect rope routing and housing alignment before tightening bolts.\u003c\/li\u003e\n  \u003cli\u003eContact seller if mounting holes or engagement don’t match photos provided.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key features and reliability points?\u003c\/h3\u003e\n\u003cp\u003eThe unit is made to deliver consistent rope retraction, a comfortable molded handle, and durable internal pawls to engage the engine quickly. It’s supplied complete as pictured so you get the starter assembly ready for immediate replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes pre-assembled pull rope and ergonomic handle for firm grip.\u003c\/li\u003e\n  \u003cli\u003eDurable pawl mechanism and spring for repeatable engagement.\u003c\/li\u003e\n  \u003cli\u003eSold as one complete recoil starter assembly—no extra parts required.\u003c\/li\u003e\n  \u003cli\u003eDesigned for frequent use on recreational and utility machines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I troubleshoot if it doesn’t work right after install?\u003c\/h3\u003e\n\u003cp\u003eIf the starter won’t engage, skips, or the rope doesn’t retract, check alignment, bolt torque, and pawl operation. Ensure the starter’s pawls contact the flywheel teeth fully and the rewind spring is under tension.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify bolt pattern and seating against engine cover—loose mounting causes misengagement.\u003c\/li\u003e\n  \u003cli\u003eCheck that the rope spools cleanly and the spring returns the rope.\u003c\/li\u003e\n  \u003cli\u003eMake sure no debris or bent teeth on the flywheel interfere with pawls.\u003c\/li\u003e\n  \u003cli\u003eContact seller with photos if parts look different than advertised images.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The QYMOTO KT196 Recoil Starter is aimed at riders, mechanics, and DIYers who own Coleman KT196, compatible TrailMaster or Hammerhead go-karts, and mini-bikes using the same starter pattern. It’s appropriate for anyone needing a cost-effective replacement part to restore reliable pull-start function on compact 196–212cc engines, without replacing the whole engine or vehicle. Always compare the starter’s mounting pattern and engagement style to your original unit before ordering to ensure a proper fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter fit Predator 212cc engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is compatible with some Predator 212cc models when the mounting pattern and engagement match; compare bolt spacing and photos before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: One complete QYMOTO recoil starter assembly as pictured, including rope and handle ready to install.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55162563756375,"sku":"B0BTBT7SDP","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-front-assembly-coleman-kt196.jpg?v=1790337413"},{"product_id":"qymoto-12-mini-bike-seat-for-coleman-ct100u-black-synthetic-leather-thick-foam-abs-plate","title":"QYMOTO 12\" Mini Bike Seat for Coleman CT100U – Black Synthetic Leather, Thick Foam \u0026 ABS Plate","description":"\u003cp\u003e\u003cstrong\u003eQYMOTO's 12\" mini bike seat is a direct replacement cushion for the Coleman CT100U, featuring a thick resilient foam core, black synthetic leather cover, and a rigid ABS mounting plate for simple installation and improved riding comfort.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplace a worn or uncomfortable saddle with this tailored 12\" seat designed for small gas-powered minibikes and go-karts. Built to match the Coleman CT100U dimensions and compatible with many small-engine frames (including Predator 79cc–100cc models), the pad balances durability and comfort with easy-to-clean vinyl and reinforced stitching. The package includes the mounting bolts needed to attach the seat to most CT100U-style bases.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this seat improve comfort on short rides?\u003c\/h3\u003e\n\n\u003cp\u003eThe seat uses high-resilience foam that is thicker toward the rear for better weight support and a tapered front for easier leg positioning. The shape reduces pressure points and provides a firmer ride that resists flattening over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2.5\" front thickness and 4\" rear thickness for progressive support\u003c\/li\u003e\n  \u003cli\u003eDensity foam core that maintains shape under repeated use\u003c\/li\u003e\n  \u003cli\u003eTapered front (6\" width) for easier mount\/dismount\u003c\/li\u003e\n  \u003cli\u003eWide back (7\" width) for stable seating area\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my Coleman CT100U or similar mini bikes?\u003c\/h3\u003e\n\n\u003cp\u003eThis cushion is cut specifically to the Coleman CT100U footprint and matches common mini bike mounting patterns. It also fits many small engines listed as 79cc–100cc with similar seat base designs, but confirm bolt hole spacing before installing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for Coleman CT100U seat base shape\u003c\/li\u003e\n  \u003cli\u003eCompatible with Predator 79cc\/97cc\/98cc\/100cc mini bikes in many cases\u003c\/li\u003e\n  \u003cli\u003eComes with necessary mounting bolts for direct swap\u003c\/li\u003e\n  \u003cli\u003eMeasure existing seat to confirm 12\" length compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build quality can I expect?\u003c\/h3\u003e\n\n\u003cp\u003eThe cover is black synthetic leather (vinyl) with reinforced stitching to resist tears and weather exposure. Underneath, a solid ABS seat plate supports a dense foam layer; this combination resists flexing while offering a cushioned ride.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlack PU\/vinyl synthetic leather for easy cleaning\u003c\/li\u003e\n  \u003cli\u003eHigh-resilience foam for long-lasting cushioning\u003c\/li\u003e\n  \u003cli\u003eSolid ABS seat plate for structural strength\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty stitching to prolong cover life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and maintenance?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is designed to be straightforward: the kit includes mounting bolts so you can swap seats without fabricating brackets. Routine upkeep is low—wipe the vinyl with a damp cloth and inspect stitching and bolts periodically.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes mounting hardware for quick replacement\u003c\/li\u003e\n  \u003cli\u003eNo special tools typically required beyond basic wrenches\u003c\/li\u003e\n  \u003cli\u003eVinyl surface wiped clean with mild soap and water\u003c\/li\u003e\n  \u003cli\u003eInspect fastening points regularly for safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This QYMOTO 12\" mini bike seat is for riders who own a Coleman CT100U or similar small-frame minibike and want a durable, comfortable, easy-to-install replacement. It suits hobbyists, parents keeping older bikes serviceable, and small-vehicle racers seeking a firmer, longer-lasting saddle without aftermarket fabrication. If you need a direct-fit, weather-resistant seat with improved padding and a sturdy base, this cushion is a practical upgrade.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this seat fit my Coleman CT100U out of the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s made to the CT100U footprint and includes mounting bolts for direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What materials are used and are they weather resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The cover is black synthetic vinyl with reinforced stitching over resilient foam and an ABS plate; it wipes clean and resists light weather.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55162758201687,"sku":"B0DT49CMCS","price":48.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-front-view-seat-coleman-ct100u.jpg?v=1790338689"},{"product_id":"qymoto-atv-rear-view-mirrors-7-8-handlebar-pair-complete-m8-m10-adapter-kit-convex-anti-scratch-glass","title":"QYMOTO ATV Rear View Mirrors 7\/8\" Handlebar Pair — Complete M8\/M10 Adapter Kit, Convex Anti-Scratch Glass","description":"\u003cp\u003e\u003cstrong\u003eQYMOTO ATV Mirror Side Rear View Mirrors are a complete, tool-free installation kit that adds wide-angle rear visibility to most ATVs, scooters, mopeds and handlebars with 7\/8\" grips.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese mirrors come as a matched left\/right pair with multiple thread adapters and handlebar clamps so you can mount them on a wide range of quads, scooters and utility bikes. Built with an adjustable ball joint and a convex, scratch-resistant reflective surface, the kit is engineered for off-road vibration and everyday street use. The package includes everything needed for direct fitment to 8mm or 10mm mounting points, plus clamps for handlebars without pre-drilled holes.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these mirrors improve my rear visibility on trails and roads?\u003c\/h3\u003e\n\u003cp\u003eThe convex mirror design widens the field of view to reduce blind spots and helps you see other riders, vehicles and obstacles behind you. A special surface treatment keeps reflections crisp even after repeated exposure to dirt and rain.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConvex lens increases peripheral awareness.\u003c\/li\u003e\n  \u003cli\u003eAnti-scratch coating preserves clarity over time.\u003c\/li\u003e\n  \u003cli\u003eWide glass minimizes distortion at common viewing angles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install this on my Polaris, CFMOTO or non-standard handlebars?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes M8-to-M8 and M8-to-M10 left\/right thread adapters and two handlebar clamps so it fits most factory mounting holes and un-drilled bars. Whether your quad uses 8mm or 10mm bolts, the adapters allow a secure connection without extra parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLeft\/right thread adapters for M8 and M10 compatibility.\u003c\/li\u003e\n  \u003cli\u003eHandlebar clamps included for 7\/8\" grips without holes.\u003c\/li\u003e\n  \u003cli\u003eWorks with common models like Polaris Sportsman and CFMOTO Cforce.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and adjustable are these mirrors for off-road use?\u003c\/h3\u003e\n\u003cp\u003eA robust aluminum stem resists bending while the ABS housing withstands impacts and road debris. The precision ball joint lets you fine-tune mirror angles and locks securely, so settings hold up under vibration and uneven terrain.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength aluminum rod for rigidity and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eImpact-resistant ABS housing for long-term outdoor use.\u003c\/li\u003e\n  \u003cli\u003e360° adjustable ball joint that maintains position under stress.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes installation quick and tool-free?\u003c\/h3\u003e\n\u003cp\u003eThe mirrors ship with a step-by-step guide and all required adapters and clamps, removing the need to source additional hardware. Most riders can fit the pair in a few minutes using the supplied parts and basic hand tightening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete kit—mirrors, clamps, adapters, and instructions included.\u003c\/li\u003e\n  \u003cli\u003eFits pre-drilled mounts or mounts using included clamps.\u003c\/li\u003e\n  \u003cli\u003eInstallation typically requires no extra tools or components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The QYMOTO ATV Mirror Side Rear View Mirrors kit is ideal for ATV riders, scooter owners, moped and quad operators who want a reliable, wide-angle rear view without custom fabrication. It's particularly useful for owners of Polaris, CFMOTO, Yamaha, Honda and other common utility and sport quads who need a universal, durable mirror solution that installs quickly and stays steady under off-road conditions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these mirrors fit 7\/8\" handlebars without pre-drilled holes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes handlebar clamps so you can mount on 7\/8\" bars without factory holes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are both 8mm and 10mm bolts supported?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Included M8–M8 and M8–M10 left\/right adapters cover common 8mm and 10mm mounts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55162877935959,"sku":"B0GJSG4JC9","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-front-facing-mirror-pair.jpg?v=1790339461"},{"product_id":"qymoto-mini-bike-carburetor-p19-for-196cc-224cc-engines-5-5-6-5hp-ohv-replacement-with-gaskets-choke","title":"QYMOTO Mini Bike Carburetor P19 for 196cc–224cc Engines — 5.5–6.5hp OHV Replacement with Gaskets \u0026 Choke","description":"\u003cp\u003e\u003cstrong\u003eThe QYMOTO Mini Bike Carburetor P19 is a replacement Huayi-style carb designed to restore reliable fueling for 196cc–224cc small engines including GX160\/GX200 clones and Predator units.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mini bike, go-kart, or small engine starts rough, idles poorly, or loses power, the carburetor is often the simplest component to upgrade. This QYMOTO P19 carburetor kit is built to fit a wide range of 5.5–6.5 hp OHV engines and comes with the common gaskets, fuel line, clamps and a choke lever needed for a straightforward swap. It’s sized to replace OEM stock carbs on many Coleman, Baja, Predator and clone engines and aims to improve throttle response and service life.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor fit my engine and vehicle?\u003c\/h3\u003e\n\u003cp\u003eCompatibility is broad across popular mini bike and small engine platforms. The P19 matches bolt patterns and intake flange dimensions for many GX160\/GX200 clones and 212cc Predator-style motors, plus applications from Coleman Powersports, Baja, TrailMaste and other minibike\/go-kart makers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 196cc \/ 212cc \/ 224cc engines and 5.5–6.5 hp OHV designs.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Coleman M200\/CT200U, Baja MB165\/MB200, TrailMaste MB200, and similar models.\u003c\/li\u003e\n  \u003cli\u003eWorks with Honda clone GX160\/GX200 and Predator 212cc families.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what comes in the kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit provides the parts needed for most straightforward replacements, so you usually only need basic hand tools. Installation takes a short time for anyone comfortable removing an airbox and disconnecting a fuel line; adjust the idle and mixture screws afterward for optimal running.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes carburetor, fuel line with clamps, two gaskets and a rubber spacer.\u003c\/li\u003e\n  \u003cli\u003eAlso supplied: choke lever and a spark plug for convenience during tune-up.\u003c\/li\u003e\n  \u003cli\u003eDesigned for bolt-on replacement using standard tools and simple adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability differences should I expect?\u003c\/h3\u003e\n\u003cp\u003eThis Huayi-made P19 aims to outlast worn OEM carbs and provide crisper throttle response. While it won’t increase engine horsepower beyond design limits, it can restore lost performance caused by clogged jets, leaking float bowls or damaged linkages.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed from corrosion-resistant materials for longer service life.\u003c\/li\u003e\n  \u003cli\u003eReplaces common-failure parts and improves fuel metering compared to aged stock carbs.\u003c\/li\u003e\n  \u003cli\u003eShips pre-assembled where possible to reduce setup time on installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain this carburetor for reliable operation?\u003c\/h3\u003e\n\u003cp\u003eRoutine upkeep keeps the carburetor functioning: use clean fuel, replace the fuel filter, and store equipment with fuel stabilizer when idle for long periods. Periodic cleaning of jets and inspection of gaskets will prevent leaks and poor idling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect gaskets and replace if hardened or leaking.\u003c\/li\u003e\n  \u003cli\u003eKeep fuel lines and clamps tight and replace cracked hoses.\u003c\/li\u003e\n  \u003cli\u003eClean jets and passages with appropriate carburetor cleaner if performance degrades.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Builders, hobbyists and owners of minibikes, go-karts and small-engine equipment who need a reliable replacement carburetor without sourcing OEM-only parts. It suits repair shops and DIY mechanics installing on Honda-clone GX160\/GX200 engines, Predator 212cc systems and a variety of Coleman, Baja and TrailMaste models that share the P19\/Huayi bolt pattern. If you want a ready-to-install kit with the common seals, fuel hose and choke lever included, this QYMOTO P19 carburetor kit is a practical, affordable choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carb fit a Honda GX160 clone?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The QYMOTO P19 is designed to fit GX160\/GX200 clone engines and similar 196cc–224cc small engines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What parts are included with the carburetor kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes the carburetor, fuel line with clamps, two gaskets, rubber spacer, choke lever and a spark plug.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55163096039767,"sku":"B0CTQCZQ29","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-p19-front-view-carburetor.jpg?v=1790341329"},{"product_id":"qymoto-725-cvt-drive-belt-kit-for-30-series-torque-converters-3-pack-replacement-belts-for-go-kart-mini-bike","title":"QYMOTO 725 CVT Drive Belt Kit for 30-Series Torque Converters — 3-Pack Replacement Belts for Go-Kart \u0026 Mini-Bike","description":"\u003cp\u003e\u003cstrong\u003eQYMOTO 725 is a replacement CVT drive belt sold as a 3-piece kit engineered to fit 30-series torque converters on 30-series go-kart and mini-bike drivetrains.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your go-kart or mini-bike uses a 30-series torque converter, this QYMOTO 725 belt kit offers a direct-replacement option designed for reliable power transfer in common small-vehicle setups. The kit contains three identical belts so you have spares on hand for routine maintenance or quick swaps. It is built to match the fitment and dimensions required by many American Sportworks, TrailMaster and Hammerhead models that specify the 725 belt size and associated part numbers.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and torque converters are these belts compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe QYMOTO 725 belts are made to fit 30-series torque converter systems and are cross-compatible with several mainstream small-vehicle lines. They work with American Sportworks Fox Vector and Marauder kits, and fit many TrailMaster and Hammerhead mid-karts and mini-bikes that accept a 725 belt.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits American Sportworks 4170 Fox Vector and 5210 Marauder 208cc models\u003c\/li\u003e\n  \u003cli\u003eCompatible with TrailMaster mid karts and select Hammerhead models\u003c\/li\u003e\n  \u003cli\u003eDirect match for torque converters requiring a 725 replacement belt\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm the 725 belt is the right size for my kart?\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, inspect the old belt for stamped numbers and compare measurements when possible. Some kits use a 669 or other sizes, so checking the existing belt’s part number or consulting your vehicle manual avoids ordering the wrong size.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLook for printed or engraved part numbers on the old belt\u003c\/li\u003e\n  \u003cli\u003eMeasure belt length and width against 725 specifications if available\u003c\/li\u003e\n  \u003cli\u003eRefer to your vehicle model’s parts list or service manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and what should I expect from the 3-belt kit?\u003c\/h3\u003e\n\u003cp\u003eThis purchase includes three QYMOTO 725 CVT drive belts packaged together. Having multiple belts means you can replace a worn belt immediately and keep extras for future maintenance, reducing downtime for your kart or mini-bike.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contains 3 x QYMOTO 725 drive belts\u003c\/li\u003e\n  \u003cli\u003eEach belt is sized for 30-series torque converters\u003c\/li\u003e\n  \u003cli\u003eSupplied as replacement items for listed models and compatible kits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there replacement part numbers or cross-references I should know?\u003c\/h3\u003e\n\u003cp\u003eThe QYMOTO 725 kit corresponds with common replacement part numbers used in aftermarket and OEM listings, helping you verify compatibility. Use these references when matching to a parts diagram or ordering from a dealer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement part numbers include 9.110.018 and 9.100.018-725\u003c\/li\u003e\n  \u003cli\u003eUseful for cross-referencing with manufacturer parts lists\u003c\/li\u003e\n  \u003cli\u003eWorks as a direct replacement in many small-engine CVT drives\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This belt kit is intended for hobbyists, fleet owners, and DIY mechanics who maintain go-karts, mini-bikes, or small utility karts that use 30-series torque converters. It’s especially useful for owners of American Sportworks, TrailMaster, and Hammerhead vehicles who need a reliable replacement or spare belts to minimize service interruptions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit American Sportworks go-karts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The QYMOTO 725 kit fits several American Sportworks models including 4170 Fox Vector and 5210 Marauder that accept a 725 belt.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many belts are included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes three QYMOTO 725 CVT drive belts, giving you two spares for future replacements.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55163216953687,"sku":"B0FH27HSHK","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-725-front-packaging.jpg?v=1790342191"},{"product_id":"qymoto-kt196-go-kart-carburetor-for-huayi-p19-196cc-includes-gaskets-spacer-choke","title":"QYMOTO KT196 Go-Kart Carburetor for Huayi P19 196cc — Includes Gaskets, Spacer \u0026 Choke","description":"\u003cp\u003e\u003cstrong\u003eQYMOTO's KT196-compatible carburetor is a complete replacement kit for Huayi P19\/KT196 196cc (6.5hp) go-kart engines, including gaskets, spacer, fuel line and choke lever for easy installation and smoother running.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're repairing a Coleman-style KT196 kart or swapping a worn carburetor on any P19 OHV engine variant, this QYMOTO unit is built as a direct-fit aftermarket replacement. The assembly arrives new, with the small parts needed to get the engine back to reliable starting and throttle response. It’s designed for hobbyists and mechanics who want a straightforward swap without custom fabrication.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor fit my KT196 or Huayi P19 engine?\u003c\/h3\u003e\n\u003cp\u003eYes — the QYMOTO carburetor is sized for KT196-family machines and Huayi P19 OHV engines commonly found in 196cc\/6.5hp go-karts and similar small off-road equipment. Confirm mounting pattern and throttle linkage match your frame before ordering to ensure correct fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for KT196 Coleman Powersports off-road go-karts\u003c\/li\u003e\n  \u003cli\u003eCompatible with Huayi P19 196cc\/6.5hp engines\u003c\/li\u003e\n  \u003cli\u003eCheck bolt spacing and intake flange dimensions against your unit\u003c\/li\u003e\n  \u003cli\u003eIncludes rubber spacer and gaskets to adapt to common intake variations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and how does that simplify installation?\u003c\/h3\u003e\n\u003cp\u003eThe package contains the carburetor plus the essential small hardware to mount and connect it right away. With the included fuel line, clamps, gaskets, rubber spacer and choke lever, you avoid sourcing separate components and reduce downtime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne QYMOTO carburetor body ready to mount\u003c\/li\u003e\n  \u003cli\u003eFuel hose with two clamps for immediate connection\u003c\/li\u003e\n  \u003cli\u003eTwo intake gaskets and one rubber spacer to seal and align\u003c\/li\u003e\n  \u003cli\u003eChoke lever for easier cold starts and tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this carburetor affect performance and reliability?\u003c\/h3\u003e\n\u003cp\u003eAs a new, aftermarket replacement built by Huayi-specified design, the unit restores intended fuel delivery and throttle response when the old carburetor is worn or clogged. It won’t change your engine’s displacement but can improve smoothness and responsiveness by replacing degraded parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores consistent fuel metering for smoother acceleration\u003c\/li\u003e\n  \u003cli\u003eNew seals reduce vacuum and fuel leaks\u003c\/li\u003e\n  \u003cli\u003eChoke lever helps achieve reliable cold starts\u003c\/li\u003e\n  \u003cli\u003eFuel line and clamps prevent fuel seepage at the connection points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying and installing?\u003c\/h3\u003e\n\u003cp\u003eInspect the physical layout of your current carburetor and intake manifold to verify bolt pattern, throttle linkage orientation and hose lengths. Also confirm engine model stamping or documentation to match the KT196\/P19 family; mismatch can lead to installation headaches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare mounting flange shape and bolt spacing to your existing carb\u003c\/li\u003e\n  \u003cli\u003eVerify throttle and choke cable routing will reach the new lever positions\u003c\/li\u003e\n  \u003cli\u003eEnsure intake manifold dimensions match or can accept the supplied spacer and gaskets\u003c\/li\u003e\n  \u003cli\u003eClean the intake area and replace any fuel filters for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This QYMOTO carburetor kit is intended for go-kart owners, small-engine mechanics and DIYers who operate KT196 or Huayi P19 196cc\/6.5hp engines and need a direct replacement that includes the basic installation parts. It’s ideal if you want a brand-new carburetor with gasket and hose components to restore reliable starting and more consistent throttle behavior without custom modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this carburetor a direct replacement for Coleman KT196?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s made to fit KT196\/P19 196cc (6.5hp) engines, but verify bolt spacing and linkage before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include everything needed to connect the fuel line?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it includes a fuel line plus clamps, gaskets, a rubber spacer and a choke lever for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55163915305303,"sku":"B0BHTQ6F7Z","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-carburetor-front-view.jpg?v=1790348193"},{"product_id":"qymoto-starter-solenoid-relay-for-cfmoto-cforce-9cr6-150310-direct-fit-water-resistant-heavy-duty","title":"QYMOTO Starter Solenoid Relay for CFMOTO CForce — 9CR6-150310 Direct-Fit, Water-Resistant Heavy-Duty","description":"\u003cp\u003e\u003cstrong\u003eThe QYMOTO starter solenoid relay 9CR6-150310 is a direct-fit replacement for many CFMOTO CForce ATVs that restores reliable starting performance by protecting the starter circuit from moisture and overheating.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your CFMOTO CForce ATV has intermittent starts, sticking starter clicks, or a relay that fails in wet or dusty conditions, this QYMOTO relay is built to address those problems. Engineered to match OEM fitment and electrical characteristics, it replaces worn or damaged starter relays across a wide range of CForce model years. The relay features improved internal sealing to reduce ingress of water and debris, plus construction meant to withstand heavy cranking loads so you get consistent starts on the trail, ranch, or in wet climates.\u003c\/p\u003e\n\n\u003ch3\u003eWhat CFMOTO models does this relay fit?\u003c\/h3\u003e\n\u003cp\u003eThis QYMOTO relay is manufactured to replace the original relay used on many CForce ATVs. Confirm the part number on your vehicle before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with CFMOTO CForce 400S, 500S, 600S models\u003c\/li\u003e\n  \u003cli\u003eFits CForce 800 XC, CForce 400AU, 500 HO and CForce 1000 families\u003c\/li\u003e\n  \u003cli\u003eReplacement part number: 9CR6-150310 — verify against your existing relay\u003c\/li\u003e\n  \u003cli\u003eCheck product images and your OEM part sticker for exact match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the QYMOTO relay perform in rough or wet conditions?\u003c\/h3\u003e\n\u003cp\u003eThe relay includes upgraded internal sealing to keep moisture, dirt, and mud out of the coil and contacts, which reduces the chance of coil burnout and contact corrosion. This makes it more resilient during trail rides and in humid environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnhanced sealing prevents water and dust intrusion\u003c\/li\u003e\n  \u003cli\u003eDurable internal components resist coil overheating under heavy starts\u003c\/li\u003e\n  \u003cli\u003eDesigned for off-road exposure — helps reduce unexpected starter failures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose this relay over a worn OEM unit?\u003c\/h3\u003e\n\u003cp\u003eWhen original relays age they can develop increased resistance, contact pitting, or compromised seals, all of which cause poor starting or complete failure. The QYMOTO replacement aims to restore factory electrical performance while offering extra protection against environmental damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-quality fit and electrical characteristics for straightforward swap-in\u003c\/li\u003e\n  \u003cli\u003eBuilt to reduce overheating during cold or repeated heavy cranks\u003c\/li\u003e\n  \u003cli\u003eExtends reliability compared with many stock relays on older ATVs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm and install the relay on my CForce?\u003c\/h3\u003e\n\u003cp\u003eBefore purchase, compare the replacement number 9CR6-150310 to the part on your machine and review the images provided. Installation typically requires simple access to the battery\/starter relay area and basic hand tools; consult your service manual for exact steps and torque specs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare part numbers and connector layout with your existing relay\u003c\/li\u003e\n  \u003cli\u003eDisconnect the battery before replacing the relay to avoid shorts\u003c\/li\u003e\n  \u003cli\u003eUse proper mounting hardware and tighten electrical terminals securely\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Riders, ranchers, and mechanics who own CFMOTO CForce ATVs and need a dependable replacement starter relay that resists moisture and heavy-duty cranking. If your ATV shows intermittent starting, audible clicking, or you see corrosion or wear on the original relay, this QYMOTO 9CR6-150310 unit offers a cost-effective, OEM-compatible repair option. Always verify fitment with your vehicle’s part number and consult a technician if you are unsure about electrical installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this relay an exact OEM replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it matches OEM fit and electrical characteristics for part number 9CR6-150310; confirm with your existing relay.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this relay stop starter issues in wet conditions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The relay has enhanced sealing to reduce moisture and dust ingress, improving reliability in wet or dusty environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55164136096087,"sku":"B09J4T9XNF","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-cfmoto-relay-front-view.jpg?v=1790350620"},{"product_id":"qymoto-go-kart-cvt-drive-belt-203589-for-coleman-kt196-ck196-t-196cc-asymmetric-30-series","title":"QYMOTO Go Kart CVT Drive Belt 203589 for Coleman KT196\/CK196-T 196cc — Asymmetric 30‑Series","description":"\u003cp\u003e\u003cstrong\u003eQYMOTO Go Kart Belt 203589 is a direct-fit CVT torque converter drive belt designed to replace worn belts on Coleman KT196 and CK196-T 196cc go-karts for reliable power transfer.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen the original drive belt on your 196cc Coleman go-kart starts to slip, chatter, or wear thin, the QYMOTO 203589 offers a factory-style replacement engineered to restore smooth acceleration and dependable engagement. This asymmetric 30-series belt matches the dimensional profile used in many small off-road karts and mini bikes that employ the Torque-a-Verter system, making it a practical repair part for several brands and models.\u003c\/p\u003e\n\n\u003ch3\u003eWill this belt fit my Coleman KT196 or CK196-T?\u003c\/h3\u003e\n\u003cp\u003eYes — the QYMOTO 203589 is produced to the same size and angle specifications as the original equipment used on KT196 and CK196-T 196cc Coleman go-karts. It uses the asymmetric tooth\/side angles and overall length required for the torque converter on those models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: approximately 27 1\/32 inches (measured along belt center).\u003c\/li\u003e\n  \u003cli\u003eWidth: around 3\/4 inch, matching 30-series drive belts.\u003c\/li\u003e\n  \u003cli\u003eAngle: asymmetric sides with 20½° and 18° + 2½° configuration.\u003c\/li\u003e\n  \u003cli\u003eDesigned for CVT torque converter systems found on Coleman 196cc off-road karts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat other go-karts and mini bikes are compatible with this 203589 belt?\u003c\/h3\u003e\n\u003cp\u003eThe belt is widely used across several mini-utility and recreational go-kart lines that share the 30-series torque converter standard. It fits many models built by American Sportworks, Manco, Murray and others that list equivalent part numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits American Sportworks models such as Black Fox, Red Fox LXT, Fox 2x5 and Vortex variants.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Manco model lines like Dingo 285\/286 and various 485\/486\/606 units.\u003c\/li\u003e\n  \u003cli\u003eListed replacements include Manco 5959, Comet 203589 and Murray 12-8487.\u003c\/li\u003e\n  \u003cli\u003eAlso used on some mini bikes and other small vehicles with Torque-a-Verter drives.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this belt affect performance and durability?\u003c\/h3\u003e\n\u003cp\u003eThe QYMOTO 203589 is manufactured from durable materials intended to resist everyday wear, heat, and flexing in normal off-road use. Replacing a worn belt with a properly sized, quality belt restores efficient belt seating in the pulleys and reduces slippage under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial choice aims for consistent torque transfer and longer service life.\u003c\/li\u003e\n  \u003cli\u003eCorrect asymmetrical profile ensures the belt tracks and engages the converter properly.\u003c\/li\u003e\n  \u003cli\u003eReduces jerking, slipping, and premature wear when installed and tensioned correctly.\u003c\/li\u003e\n  \u003cli\u003eHelps maintain factory-like acceleration and top speed characteristics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I replace the belt and what should I check during installation?\u003c\/h3\u003e\n\u003cp\u003eChanging the belt is straightforward on most go-karts with accessible torque converter assemblies, but follow manufacturer safety steps and consult the service manual for model-specific guidance. Inspect the pulleys, bearings, and alignment during the swap to avoid premature belt failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWear safety gear and secure the vehicle before working on the drive system.\u003c\/li\u003e\n  \u003cli\u003eCheck both drive and driven pulleys for grooves, chips, or excessive wear.\u003c\/li\u003e\n  \u003cli\u003eVerify correct belt orientation for the asymmetric faces during installation.\u003c\/li\u003e\n  \u003cli\u003eAfter fitting, test under light load and recheck routing and tension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The QYMOTO 203589 Go Kart Belt is ideal for owners and mechanics who maintain Coleman KT196 and CK196-T 196cc go-karts, or those servicing compatible mini bikes and go-kart models from American Sportworks, Manco, Murray and similar makers. Choose this belt if you need a direct replacement that matches original geometry and restores smooth CVT torque-converter operation for everyday off-road riding and recreational use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the QYMOTO 203589 the same as Manco 5959?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, QYMOTO 203589 is listed as a compatible replacement for Manco 5959 and Comet 203589.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this belt on other torque converter go-karts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Often yes—fits many 30-series Torque-a-Verter systems on American Sportworks, Manco, Murray and similar models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55164593897815,"sku":"B0D95Y635G","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-front-packaging-203589.jpg?v=1790353892"},{"product_id":"qymoto-cfmoto-air-filter-0800-112000-replacement-for-uforce-zforce-cforce-direct-fit-long-life","title":"QYMOTO CFMOTO Air Filter 0800-112000 Replacement for UForce ZForce CForce — Direct-Fit, Long-Life","description":"\u003cp\u003e\u003cstrong\u003eQYMOTO's replacement air filter 0800-112000 is a direct-fit, long-life intake filter engineered to restore clean airflow and protect engines in CFMOTO UForce, ZForce and CForce machines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your CFMOTO ATV or UTV is running in dusty trails, work sites, or wet seasons, the intake filter is the first line of defense against abrasive particles and debris. This QYMOTO-filtered replacement matches the OEM 0800-112000 specification and supersedes several legacy part numbers, giving you a like-for-like option that maintains proper airflow and filtration without altering engine tuning.\u003c\/p\u003e\n\n\u003ch3\u003eWill this filter fit my CFMOTO model?\u003c\/h3\u003e\n\u003cp\u003eThis filter covers a wide range of CFMOTO ATVs and UTVs but is not universal. Confirm the part number and model year before ordering to ensure correct fit and sealing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible ATVs: CForce 400 (2016–2025), CForce 500\/500 S (2017–2025), CForce 600 (2019–2022), CForce 800\/800 XC (2013–2024), CForce 850 XC (2020–2023).\u003c\/li\u003e\n  \u003cli\u003eCompatible UTVs: UForce 500 (2016–2020), UForce 800 (2013–2022), ZForce 500 (2016–2022), ZForce 800 EX (2013–2022), ZForce 850 (2021–2023).\u003c\/li\u003e\n  \u003cli\u003eDo not use for UForce 600; check your vehicle’s manual and the 0800-112000 part code.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this air filter protect engine life and performance?\u003c\/h3\u003e\n\u003cp\u003eThe media traps dust and abrasive particles before they reach intake valves, combustion chambers, and moving parts, reducing wear. Maintaining clean airflow also helps the engine run smoothly and keeps power delivery consistent under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended-life filtration reduces internal component wear in dusty or muddy conditions.\u003c\/li\u003e\n  \u003cli\u003eRestores OEM airflow characteristics to preserve throttle response and fuel delivery.\u003c\/li\u003e\n  \u003cli\u003eDesigned to seat and seal like the original CFMOTO part to prevent bypassing unfiltered air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace or service this filter?\u003c\/h3\u003e\n\u003cp\u003eReplacement frequency depends on riding conditions: dusty, sandy, or high-pollen environments require more frequent service than paved or wet conditions. Inspect the filter at regular intervals and follow manufacturer maintenance recommendations for your specific model.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVisual inspection after heavy rides or every few hundred miles in dusty terrain.\u003c\/li\u003e\n  \u003cli\u003eReplace when the media is dark, damaged, or clogged to avoid restricted airflow.\u003c\/li\u003e\n  \u003cli\u003eKeep a spare on hand if you frequently ride in extreme off-road conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how do I confirm correct purchase?\u003c\/h3\u003e\n\u003cp\u003eThe product ships as a single replacement air filter engineered to meet OEM fitment. Before completing your purchase, match the part number and model year to ensure compatibility and avoid returns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes: 1 x QYMOTO air filter (part 0800-112000).\u003c\/li\u003e\n  \u003cli\u003eSupersedes legacy numbers: 0800-112000-10000, 0800-112000-00001, 0800-112000-10010, 0800-112000-20010.\u003c\/li\u003e\n  \u003cli\u003eCheck your vehicle’s parts manual or remove the old filter to confirm the part code.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This QYMOTO 0800-112000 replacement air filter is intended for owners and technicians of CFMOTO UTVs and ATVs who need an OEM-compatible, maintenance-ready intake filter. It's a practical choice for trail riders, farmers, and fleet managers who require reliable protection in dusty, muddy, or high-use environments and want a direct-fit part that preserves engine performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this filter a direct replacement for OEM 0800-112000?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, QYMOTO 0800-112000 is a direct-fit replacement and supersedes several OEM revisions; confirm part number and model year before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this filter on a UForce 600?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, this part is not compatible with UForce 600. Check the listed compatible models to ensure proper fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55165541220695,"sku":"B0BG7YF2Z7","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-air-filter-front-view.jpg?v=1790355252"},{"product_id":"qymoto-predator-212cc-upgraded-mini-bike-go-kart-air-filter-kit-black-high-flow-filter-adapter-service-parts","title":"QYMOTO Predator 212cc upgraded mini bike\/go-kart air filter kit — black high-flow filter, adapter \u0026 service parts","description":"\u003cp\u003e\u003cstrong\u003eQYMOTO's Predator 212cc upgraded air filter kit is a complete intake replacement that improves filtration and protects small engines used on mini bikes, go-karts and clones.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit bundles a high-flow black upgrade air filter with an intake adapter, gasket, fuel filter, spark plug and mounting hardware to fit a wide range of mini-bike and small-engine platforms. It’s designed as a direct-replacement performance intake for Coleman CT200U\/CT200U-EX, KT196, BK200\/CK196 go-karts, Baja mini bikes (MB165\/MB200), Hammerhead 80T and Honda GX120\/GX140\/GX160\/GX200 style engines and common clones. The parts arrive new and ready for a straightforward install that modernizes the air intake and basic service items in one purchase.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit improve engine protection and airflow?\u003c\/h3\u003e\n\u003cp\u003eThe upgraded filter element uses a denser media than many stock foams to trap more dirt while still allowing improved airflow. The included adapter creates a better seal between the carburetor and filter, reducing unfiltered air leaks that can accelerate wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigher-efficiency filter media for finer particle capture\u003c\/li\u003e\n  \u003cli\u003eAdapter and gasket ensure a tight carb-to-filter connection\u003c\/li\u003e\n  \u003cli\u003eReduced ingestion of dust and debris compared with damaged or missing stock parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich engines and models will this kit fit and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit fits a broad set of mini-bike, go-kart and small engine platforms including Coleman CT200U\/CT200U-EX, BT200X, Axis M200, KT196 and Baja MB-series, plus Honda GX120–GX200 style engines and common clones. Installation is designed for DIYers with basic tools; most installations require removing the old airbox, replacing the gasket and securing the adapter with the supplied hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with GX120, GX140, GX160, GX200 engines and many clones\u003c\/li\u003e\n  \u003cli\u003eIncludes gasket, mounting hardware and adapter for direct fitment\u003c\/li\u003e\n  \u003cli\u003eBasic hand tools and 20–40 minutes expected for most installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat additional parts are included and why are they useful?\u003c\/h3\u003e\n\u003cp\u003eBeyond the upgraded air filter and adapter, the kit provides a replacement spark plug and inline fuel filter—common wear items that benefit from periodic replacement. Including these items saves you an extra parts run and helps return the engine to reliable service while you upgrade the intake.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNew spark plug for consistent ignition and easier starting\u003c\/li\u003e\n  \u003cli\u003eInline fuel filter to trap sediment before it reaches the carburetor\u003c\/li\u003e\n  \u003cli\u003eMounting hardware and gasket for a complete, leak-free install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this affect fuel delivery or require carb tuning?\u003c\/h3\u003e\n\u003cp\u003eBecause this is a modest high-flow upgrade, most engines will run normally with the stock carburetor settings; however, engines with significant intake changes sometimes benefit from minor jetting adjustments. Monitor running temperature, throttle response and spark plug color after installation and adjust the carburetor only if performance indicates a need.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypically does not require immediate carb rejetting\u003c\/li\u003e\n  \u003cli\u003eCheck spark plug color and engine response after a short test ride\u003c\/li\u003e\n  \u003cli\u003eMinor carb adjustments possible for optimal performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Riders and hobbyists who own Coleman CT200U\/CT200U-EX, KT196\/BK200\/CK196 go-karts, Baja mini bikes (MB165\/MB200), Hammerhead 80T or Honda GX120–GX200 style engines and want a single, affordable kit to upgrade the intake, refresh the fuel and ignition components, and improve filtration. It’s best suited to DIY mechanics who want a clean, reliable replacement that reduces dust ingestion and includes the small consumables needed for routine maintenance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit Honda GX160 and GX200 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit is compatible with Honda GX160 and GX200 style engines and many common clones using the GX160\/GX200 airbox pattern.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is carburetor rejetting required after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Usually no. Most installs run fine stock, but check plug color and throttle response and adjust jetting only if needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55165983981911,"sku":"B0D25DBQ44","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-front-packaging-predator-air-filter-kit.jpg?v=1790360544"},{"product_id":"qymoto-starter-solenoid-relay-for-cfmoto-uforce-zforce-5270-150500-sealed-heavy-duty-replacement","title":"QYMOTO Starter Solenoid Relay for CFMOTO UForce ZForce - 5270-150500 Sealed Heavy‑Duty Replacement","description":"\u003cp\u003e\u003cstrong\u003eThe QYMOTO starter solenoid relay 5270-150500 is a sealed, heavy‑duty replacement relay engineered to restore reliable starting on compatible CFMOTO UForce and ZForce ATVs and UTVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your CFMOTO won’t crank or shows intermittent starting, a worn or failed starter solenoid relay is often the culprit. This QYMOTO unit replaces OEM numbers 5270-150500 and 7020-150310 and is built with a rugged, sealed housing to protect internal contacts from mud, moisture and trail debris so it keeps working in off‑road conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this relay improve starting reliability on trails?\u003c\/h3\u003e\n\u003cp\u003eThe relay is validated for off‑road heavy‑duty use and designed to endure repeated actuation cycles, even under cold starts and heavy loads. Reliable contact engagement reduces voltage loss to the starter motor so the engine cranks consistently when you need it.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement for OEM 5270-150500 and 7020-150310 for direct fit\u003c\/li\u003e\n  \u003cli\u003eSealed housing protects against dirt, water and mud intrusion\u003c\/li\u003e\n  \u003cli\u003eTested for repeated actuation to maintain cranking performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my CFMOTO model and year?\u003c\/h3\u003e\n\u003cp\u003eThis relay fits a wide range of CFMOTO models — double‑check your factory part number and vehicle model year to confirm compatibility before ordering. The listing supports many ZForce, UForce, and CForce models across multiple years, but exact fitment depends on your unit’s original part number.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits: ZF500, ZF800, ZF1000 and ZForce Z8 800 EX\u003c\/li\u003e\n  \u003cli\u003eAlso fits UForce 1000, ZForce 950 and UForce 600 (2021–2022)\u003c\/li\u003e\n  \u003cli\u003eIncludes earlier models like CForce 800 (2015–2017) and UF500\/UF800 UTVs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the QYMOTO relay for off‑road use?\u003c\/h3\u003e\n\u003cp\u003eDurability is a core design point: the relay uses a rugged sealed shell to guard electrical contacts from contaminants, extending service life in harsh environments. The part has been validated through actuation testing to ensure consistent engagement over many cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSealed construction for dust and moisture resistance\u003c\/li\u003e\n  \u003cli\u003eRobust internal contacts rated for heavy starting loads\u003c\/li\u003e\n  \u003cli\u003eCorrosion‑resistant terminals for longer life in wet conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm I'm ordering the correct relay?\u003c\/h3\u003e\n\u003cp\u003eBefore you buy, compare the replacement part numbers stamped on your original relay to the QYMOTO numbers and review the product photos. If in doubt, contact the seller with your vehicle VIN, model and year so they can verify fitment for you.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck for OEM numbers 5270-150500 or 7020-150310 on your old relay\u003c\/li\u003e\n  \u003cli\u003eCompare terminal layout and mounting points with supplied photos\u003c\/li\u003e\n  \u003cli\u003eContact support with VIN, model and year for final confirmation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders, mechanics and owners of CFMOTO UForce, ZForce and related CForce\/UF series UTVs and ATVs who need a reliable, weather‑resistant starter solenoid relay to restore or improve starting performance. Ideal for off‑road enthusiasts who want a direct replacement that withstands mud, water and repeated use without complex wiring changes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace OEM part 5270-150500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — this QYMOTO relay is a direct replacement for OEM 5270-150500 and 7020-150310.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the relay water and dust resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it features a rugged sealed housing designed to protect internal parts from mud and moisture.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55166224564567,"sku":"B09J4VVPY5","price":36.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-starter-solenoid-front-view.jpg?v=1790365361"},{"product_id":"qymoto-mini-bike-go-kart-muffler-for-196cc-212cc-engines-coleman-ct200u-fit-spark-deflector-heat-shield","title":"QYMOTO Mini Bike \u0026 Go-Kart Silencer for 196cc–212cc Engines — Coleman CT200U Fit, Spark Deflector \u0026 Heat Shield","description":"\u003cp\u003e\u003cstrong\u003eQYMOTO's compact muffler with deflector replaces worn silencers on 196cc–212cc mini bikes and go-karts to restore exhaust flow, reduce noise, and block sparks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a direct-fit replacement for a wide range of small-engine recreational vehicles, this muffler assembly brings robust construction and safety features to Coleman CT200U\/CT200U-EX, BT200X, Baja MB165\/MB200, TrailMaster MB200-2 and many Tao Motor\/Predator\/Hisun engines. The unit ships complete with gasket, deflector, and hardware so you can swap it in without hunting for parts. It focuses on durability, heat management, and consistent exhaust performance under aggressive riding conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this muffler affect engine performance and sound?\u003c\/h3\u003e\n\u003cp\u003eFitting the correct muffler helps the engine breathe the way the manufacturer intended. This QYMOTO silencer maintains steady exhaust flow to keep power delivery consistent while smoothing the harsh edge off high-frequency noise produced by small two-valve engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered internal flow for steady backpressure and consistent throttle response.\u003c\/li\u003e\n  \u003cli\u003eNoise reduction without over-restricting exhaust to preserve power.\u003c\/li\u003e\n  \u003cli\u003eDurable construction resists deformation that can change performance over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety features prevent fires and component damage?\u003c\/h3\u003e\n\u003cp\u003eThe muffler includes an internal anti-spark mesh and an external heat shield to reduce the chance of hot particles escaping and to limit radiated heat near plastics and fuel lines. Those passive protections help lower spark-related ignition risk and reduce heat soak to nearby components during extended runs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAnti-spark mesh traps glowing particles before they exit the exhaust.\u003c\/li\u003e\n  \u003cli\u003eIntegrated heat shield dissipates surface heat away from vulnerable parts.\u003c\/li\u003e\n  \u003cli\u003eSturdy welds and thicker deflector plate resist vibration-related failures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my mini bike or go-kart model?\u003c\/h3\u003e\n\u003cp\u003eThis muffler is made to be compatible with many popular 196cc and 212cc small engines used in mini bikes and go-karts. It aligns with factory mounting points for known models, so installation is straightforward when paired with the included gasket and fasteners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit for Coleman CT200U\/CT200U-EX, BT200X, B200 models and similar frames.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Baja MB165\/MB200, TrailMaster MB200-2, RT200 and Doodlebug style mini bikes.\u003c\/li\u003e\n  \u003cli\u003eAlso suits Predator 212cc and Hisun\/KT196 engines used by many Tao Motor machines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and serviceable is the muffler over time?\u003c\/h3\u003e\n\u003cp\u003eQYMOTO upgraded the muffler deflector weight and reinforced inlet piping to resist impact and vibration that commonly cause premature failure. The unit is intended for repeated use and straightforward servicing—when inspection or gasket replacement is needed you can remove and reinstall the assembly with basic tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavier deflector plate for improved impact resistance compared with lighter aftermarket units.\u003c\/li\u003e\n  \u003cli\u003eReinforced, welded inlet pipe stabilizes the assembly under vibration.\u003c\/li\u003e\n  \u003cli\u003eSupplied gasket and nuts make installation and future servicing simple.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Riders, builders, and mechanics who need a reliable replacement muffler for 196cc–212cc mini bikes and go-karts will appreciate this QYMOTO assembly. It’s intended for people who want a sturdier, safer quieting solution than cheap throwaway silencers—especially owners of Coleman, Baja, TrailMaster, Predator, Hisun, and many Tao Motor–powered machines looking for an easy bolt-on swap that restores exhaust integrity and reduces spark and heat risk.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this muffler a direct bolt-on replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it includes the gasket and nuts for direct fit on many Coleman, Baja, TrailMaster, Predator, and Hisun 196cc–212cc models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it reduce the risk of sparks and fires?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It has an anti-spark mesh and heat shield to lower spark emission and limit heat transfer to nearby components.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55166346625367,"sku":"B0DZ6PQZJP","price":38.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-front-view-muffler.jpg?v=1790367033"},{"product_id":"qymoto-atv-phone-holder-motorcycle-mount-for-12-32mm-handlebars-anti-theft-no-shake-secure-grip","title":"QYMOTO ATV Phone Holder Motorcycle Mount for 12–32mm Handlebars — Anti-Theft No-Shake Secure Grip","description":"\u003cp\u003e\u003cstrong\u003eQYMOTO ATV Phone Holder is a heavy-duty, anti-theft phone mount that clamps to 7\/8\"–1¼\" handlebars and roll cages, keeping 4.7\"–7.1\" phones stable and secure during off-road rides.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for motorcycles, ATVs, UTVs, snowmobiles, and golf carts, this mount combines reinforced clamps, shock-absorbing pads and a rust-resistant U-bolt to prevent slips, scratches and theft while you ride. It supports phones in thick protective cases and offers 360° rotation for portrait or landscape viewing, so you can navigate, film or stream hands-free. The unit uses a keyed lock and heavy springs to maintain a firm hold even on rough terrain.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the mount keep my phone from falling on bumpy trails?\u003c\/h3\u003e\n\n\u003cp\u003eThe QYMOTO holder uses eight reinforced clamps plus silicone shock pads that grip the phone on all sides, reducing movement and absorbing impact. Two heavy-duty springs add tension so the device stays seated under vibration. A keyed lock adds an extra anti-theft layer when you leave the vehicle.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eEight-point clamping system to stabilize the device\u003c\/li\u003e\n  \u003cli\u003eShock-absorbing silicone pads to prevent scratches and dampen jolts\u003c\/li\u003e\n  \u003cli\u003eDual heavy-duty springs for constant tension\u003c\/li\u003e\n  \u003cli\u003eIncluded keyed lock for theft deterrence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my handlebars and phone case?\u003c\/h3\u003e\n\n\u003cp\u003eThe mount accepts tube diameters between 12–32 mm (0.5\"–1.26\"), compatible with most ATV roll cages, motorcycle and bicycle handlebars. The cradle expands to hold smartphones from roughly 4.7\" to 7.1\"—large enough for many modern phones, including those in protective cases. Installation requires a 10 mm wrench to tighten the two lock bolts for a secure fit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eU-bolt base fits 12–32 mm handlebar diameters\u003c\/li\u003e\n  \u003cli\u003eCradle supports phones approximately 4.7\"–7.1\" in size\u003c\/li\u003e\n  \u003cli\u003eWorks with thick cases and most phone brands (iPhone, Android)\u003c\/li\u003e\n  \u003cli\u003eRequires a 10 mm wrench to mount and tighten\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow adjustable is the viewing angle for navigation or filming?\u003c\/h3\u003e\n\n\u003cp\u003eA 360° rotating ball joint lets you switch between portrait and landscape quickly, while the dual springs permit one-handed re-positioning. The design holds the phone steady after you choose the angle so you can record, stream or follow a map without repeated readjustments. The ball joint construction balances flexibility and resistance for consistent framing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFull 360° rotation for portrait and landscape modes\u003c\/li\u003e\n  \u003cli\u003eOne-handed adjustment via heavy-duty spring mechanism\u003c\/li\u003e\n  \u003cli\u003eStable positioning that resists vibration and road shock\u003c\/li\u003e\n  \u003cli\u003eCamera-friendly height for clear forward-facing recording\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and hardware make it durable outdoors?\u003c\/h3\u003e\n\n\u003cp\u003eThe base uses rust-resistant metal for long-term exposure to moisture and mud, and silicone pads guard against abrasion. All load-bearing parts are reinforced to handle the stresses of off-road riding, while the keyed lock prevents opportunistic theft. The straightforward mechanical design keeps maintenance minimal.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRust-resistant metal U-bolt and mounting hardware\u003c\/li\u003e\n  \u003cli\u003eReinforced clamps and durable spring components\u003c\/li\u003e\n  \u003cli\u003eSilicone pads to protect phone surfaces and absorb shock\u003c\/li\u003e\n  \u003cli\u003eKeyed locking mechanism included for security\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders and outdoor enthusiasts who need a dependable, theft-resistant way to use a smartphone on motorcycles, ATVs, UTVs, snowmobiles, bikes or golf carts. It’s ideal for people who want stable navigation, hands-free recording or streaming on rough terrain and those who use thicker protective cases. If you need a rugged, adjustable mount that installs with basic tools and keeps devices secure in active conditions, this QYMOTO mount is built for that purpose.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What handlebar sizes does this mount fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits handlebars and roll cages 12–32 mm (0.5\"–1.26\") in diameter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will my phone fit with a protective case?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—cradle supports most phones 4.7\"–7.1\" including many thick cases.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55166972428631,"sku":"B0DZ2H21K4","price":36.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-front-view-mounted-on-atv.jpg?v=1790373947"},{"product_id":"qymoto-kt196-go-kart-cover-for-2-seat-karts-67x45x47-in-waterproof-windproof","title":"QYMOTO KT196 Go Kart Cover for 2-Seat Karts — 67x45x47 in, Waterproof \u0026 Windproof","description":"\u003cp\u003e\u003cstrong\u003eThe QYMOTO KT196 Go Kart Cover is a heavy-duty, waterproof and windproof protective cover sized to fit most two-seat go karts, shielding your vehicle from rain, dust, UV and wind-driven debris.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you store your go kart outdoors between rides or transport it on a trailer, the QYMOTO KT196 cover offers durable weather protection and a tailored fit for many popular 2-seat models. Constructed with reinforced seams and adjustable windproof buckles, the cover balances a roomy fit with secure fastening so your kart stays covered without flapping or tearing in gusty conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow well will this cover keep my go kart dry in heavy rain?\u003c\/h3\u003e\n\u003cp\u003eThe KT196 uses waterproof material and a double-stitch seam construction to prevent water penetration along stress points. The fabric sheds water across the shell, while the reinforced seams reduce the chance of leakage at joins.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWaterproof outer fabric designed to repel rain and drizzle.\u003c\/li\u003e\n  \u003cli\u003eDouble-layer stitching at seams for improved water resistance.\u003c\/li\u003e\n  \u003cli\u003eFull-coverage dimensions (67\" x 45\" x 47\") that drape over the kart body.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the cover stay on during windy weather?\u003c\/h3\u003e\n\u003cp\u003eYes. The cover includes adjustable windproof buckles along the hem so you can cinch the bottom tight to the chassis or frame. That prevents the hem from flapping and keeps sand, leaves and rain from being blown underneath the cover.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable buckles provide a secure, customized tension.\u003c\/li\u003e\n  \u003cli\u003eSnug fit reduces wind lift and fabric movement.\u003c\/li\u003e\n  \u003cli\u003eRobust fastening reduces abrasion from rubbing against the kart.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich go karts and models are compatible with this size?\u003c\/h3\u003e\n\u003cp\u003eThe KT196 is a universal-style cover sized to fit most two-seat go karts and small buggies. It’s compatible with many popular models, but measuring your kart’s length, width and height before buying ensures the best fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for two-seat karts: 67\" long, 45\" wide, 47\" high.\u003c\/li\u003e\n  \u003cli\u003eListed compatible brands include Coleman, TrailMaster, Hammerhead, Massimo, Bennche and TaoTao families.\u003c\/li\u003e\n  \u003cli\u003eWorks with KTM196-style frames, small electric carts and similar buggies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the material and stitching for everyday outdoor use?\u003c\/h3\u003e\n\u003cp\u003eThe cover uses a double-stitch technique that increases seam tensile strength and reduces the risk of tears when the cover is put on or taken off repeatedly. That construction plus weather-resistant fabric gives longer service life under normal outdoor storage and transport conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble-stitched seams for extra durability at stress points.\u003c\/li\u003e\n  \u003cli\u003eFabric engineered to resist tearing and abrasion during use.\u003c\/li\u003e\n  \u003cli\u003eMaterial suited to repeated mounting, removal and travel exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The QYMOTO KT196 Go Kart Cover is aimed at riders and owners of two-seat recreational karts, small utility buggies and electric carts who need reliable, all-weather protection. It suits weekend trail riders who park outdoors, families storing a kart at home, rental operators protecting fleet vehicles, and anyone who transports a kart on trailers and wants a durable, secure cover that fits many popular models.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the cover dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The cover measures 67\" x 45\" x 47\", designed for most two-seat go karts and similar small buggies.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the cover windproof and waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It has waterproof fabric, double-stitched seams and adjustable windproof buckles to secure the hem.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55167301845335,"sku":"B0CJM3W3JK","price":58.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-kt196-front-view.jpg?v=1790382251"},{"product_id":"qymoto-mini-bike-cover-black-67x45x47-waterproof-uv-resistant-with-belly-strap","title":"QYMOTO Mini Bike Cover — Black 67\"x45\"x47\" Waterproof UV-Resistant with Belly Strap","description":"\u003cp\u003e\u003cstrong\u003eQYMOTO Mini Bike Cover is a heavy-duty, waterproof and UV-resistant protective cover sized to fit most minibikes, pit bikes, scooters and mopeds for secure indoor or outdoor storage.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your mini bike looking and performing its best between rides with a purpose-built cover designed to resist rain, sun, wind and winter grime. Made from durable 420D Oxford fabric and fitted with stabilizing straps, this cover balances a snug fit with easy handling so you can protect vehicles from dust, moisture and fading without a struggle.\u003c\/p\u003e\n\n\u003ch3\u003eWill this cover fit my mini bike, scooter or pit bike?\u003c\/h3\u003e\n\u003cp\u003eThe QYMOTO Mini Bike Cover is built as a universal solution for a wide range of small two- and four-wheeled recreational vehicles. Its overall dimensions and adjustable anchoring points allow it to accommodate different frame shapes while keeping the fabric tucked close to the chassis.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDimensions: 67\" L x 45\" W x 47\" H for a compact but full-body fit.\u003c\/li\u003e\n  \u003cli\u003eDesigned to fit models from brands like Coleman, Axis, BAJA, TrailMaster, Tao Tao, Massimo and Bennche.\u003c\/li\u003e\n  \u003cli\u003eWorks with minibikes, dirt bikes, pit bikes, scooters, mopeds and small buggies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the cover protect against weather and UV exposure?\u003c\/h3\u003e\n\u003cp\u003eConstructed from thick 420D Oxford fabric, the cover creates a water-resistant barrier that sheds rain and snow while blocking damaging UV rays. Reinforced hems and an elasticized bottom help seal out wind-driven moisture and keep the cover from billowing in gusts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e420D Oxford material for abrasion resistance and weather blocking.\u003c\/li\u003e\n  \u003cli\u003eElastic hem at front and rear to secure the cover to the vehicle base.\u003c\/li\u003e\n  \u003cli\u003eBelly strap that fastens underneath to prevent lift and improve stability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical features make it easy to use and store?\u003c\/h3\u003e\n\u003cp\u003eThe QYMOTO cover is designed for everyday convenience: slip it on quickly, lock it down with the belt and elastic hems, and fold it into its included storage pouch when not in use. The material balances durability with lightness so one person can handle it without difficulty.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded storage bag keeps the cover compact and ready for transport.\u003c\/li\u003e\n  \u003cli\u003eSimple elastic and belt fastening system for fast mounting and removal.\u003c\/li\u003e\n  \u003cli\u003eBlack finish hides dirt between washes and looks neat in garages or driveways.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the cover hold up for seasonal outdoor storage?\u003c\/h3\u003e\n\u003cp\u003eYes—the thickened Oxford fabric and reinforced anchoring make this cover suitable for short- and long-term outdoor storage. While no cover can stop extreme weather indefinitely, the QYMOTO Mini Bike Cover is engineered to reduce exposure and extend the life of your vehicle when left outside.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy duty fabric resists tears and punctures common in outdoor use.\u003c\/li\u003e\n  \u003cli\u003eGood water repellency and UV resistance to limit fading and corrosion.\u003c\/li\u003e\n  \u003cli\u003eStabilizing belly strap reduces wind abrasion and movement over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders, hobbyists and small-vehicle owners who need a reliable, easy-to-use protective solution for compact vehicles. If you store a mini bike, pit bike, scooter, moped or small buggy indoors or outdoors and want a weather-resistant, snug-fitting cover that’s straightforward to install and stow, the QYMOTO Mini Bike Cover is built for that purpose.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the cover dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The cover measures 67\" L x 45\" W x 47\" H, fitting most minibikes and small scooters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it include a storage bag?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, a storage pouch is included to fold and store the cover when not in use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55167365972311,"sku":"B0DG298C8S","price":40.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-front-packaging-view.jpg?v=1790384912"},{"product_id":"qymoto-kt196-driven-pulley-for-16mm-bore-go-karts-minibikes-direct-fit-replacement-with-lock-nut","title":"QYMOTO KT196 Driven Pulley for 16mm Bore Go-Karts \u0026 Minibikes — Direct-Fit Replacement with Lock Nut","description":"\u003cp\u003e\u003cstrong\u003eQYMOTO KT196 is a direct-fit driven pulley designed for Coleman minibikes and go-karts with a 16mm drive shaft, delivering reliable power transfer and easy installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt to replace worn or incorrect clutches on small off-road rigs, this KT196 driven pulley suits 16mm bore applications common to many Coleman models. It’s supplied new with the needed mounting lock nut and engineered to work with standard mini bike clutches and small horizontal engines, helping restore smooth engagement and dependable drivetrain performance.\u003c\/p\u003e\n\n\u003ch3\u003eWill this pulley fit my Coleman minibike or go-kart?\u003c\/h3\u003e\n\u003cp\u003eMeasure the internal diameter of your existing clutch bore or the exposed drive shaft before ordering. The KT196 is specifically made for a 16mm diameter drive shaft; if your shaft or bore matches, it should slide on without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits drive shafts with a 16mm diameter.\u003c\/li\u003e\n  \u003cli\u003eCompatible with many Coleman-style minibikes and go-karts.\u003c\/li\u003e\n  \u003cli\u003eCheck keyed shafts or set-screw locations for exact match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what comes in the box?\u003c\/h3\u003e\n\u003cp\u003eInstallation is simple for anyone familiar with small engine drivetrains: remove the old pulley, align the KT196 on the shaft, and secure it with the supplied lock nut. No extra adapters are included, so confirm shaft fitment first to avoid additional parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes with the mounting lock nut ready for immediate fitting.\u003c\/li\u003e\n  \u003cli\u003eDesigned for bolt-on replacement with standard tools.\u003c\/li\u003e\n  \u003cli\u003eIntended for direct-fit 16mm bore applications—no machining normally required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance can I expect with this driven pulley?\u003c\/h3\u003e\n\u003cp\u003eThe KT196 is engineered to transfer engine torque efficiently to the clutch assembly without imposing excess load on the motor. When matched to a compatible clutch and properly installed, it helps maintain predictable engagement and responsiveness under typical riding conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides consistent power transfer to the clutch system.\u003c\/li\u003e\n  \u003cli\u003eHelps avoid overload when used with appropriate engine sizes.\u003c\/li\u003e\n  \u003cli\u003eMade new and inspected for reliable operation right out of the package.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any maintenance or compatibility tips I should know?\u003c\/h3\u003e\n\u003cp\u003eKeep the pulley and mating shaft clean and free of burrs or corrosion to preserve fit and function. Periodically check the mounting lock nut for tightness and inspect the bore for wear that could cause slippage or misalignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure shaft diameter before purchase to ensure correct fit.\u003c\/li\u003e\n  \u003cli\u003eInspect for keyways or set screws that may require alignment.\u003c\/li\u003e\n  \u003cli\u003eReplace the lock nut if damaged—thread condition matters for safety.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: The QYMOTO KT196 driven pulley is intended for owners and hobbyists repairing or restoring Coleman minibikes and small go-karts that use a 16mm drive shaft. It’s a practical choice for do-it-yourself mechanics, small engine repair shops, and enthusiasts looking for a ready-to-install replacement pulley that restores reliable clutch engagement without complicated modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the KT196 include the mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The pulley ships with the mounting lock nut needed for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What shaft diameter is required for this pulley?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This model requires a 16mm drive shaft or clutch bore for correct fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55167395070295,"sku":"B0DFQ4GD62","price":61.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-kt196-front-profile.jpg?v=1790385684"},{"product_id":"qymoto-driver-pulley-for-30-series-torque-converter-kt196-3-4-bore-spacer-bolt-included","title":"QYMOTO Driver Pulley for 30-Series Torque Converter KT196 3\/4\" Bore — Spacer \u0026 Bolt Included","description":"\u003cp\u003e\u003cstrong\u003eThe QYMOTO KT196 3\/4\" driver pulley is a direct-replacement torque converter component designed for 30-series go-kart clutches and engines with a straight 3\/4\" crankshaft.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered to slot into 30-series clutch systems, this driver pulley kit gives you the essential hardware to restore or upgrade the primary pulley on compatible go karts, mini bikes and utility machines. The assembly includes the driver pulley, a metal washer spacer and the mounting bolt so you have the core parts needed for a quick swap. It’s built to match common aftermarket clutches used on models such as Comet, Trail Master, Manco and similar 30-series setups.\u003c\/p\u003e\n\n\u003ch3\u003eWill this pulley fit my engine or go kart?\u003c\/h3\u003e\n\u003cp\u003eCheck the crankshaft diameter and clutch series before ordering: the KT196 is made for a straight 3\/4\" (0.75\") crankshaft and 30-series torque converter clutches. It is compatible with many 6.5 hp (212cc) engines and standard 30-series clutch housings, but it is not universal—some small engines use different shaft sizes or keyed shafts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits engines with a straight 3\/4\" crankshaft only\u003c\/li\u003e\n  \u003cli\u003eDesigned for 30-series torque converter clutches\u003c\/li\u003e\n  \u003cli\u003eWorks with many Comet-compatible, Trail Master and Manco go karts\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 16mm Hisun Coleman minibike crankshafts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install the QYMOTO driver pulley?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with clutch and pulley swaps; basic tools are all that’s required. Remove the old driver pulley, fit the washer spacer where specified, slip the new pulley onto the shaft and secure it with the supplied mounting bolt. Make sure to torque to the engine or clutch manufacturer’s recommended specification and check alignment before first use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes driver pulley, metal washer spacer and mounting bolt\u003c\/li\u003e\n  \u003cli\u003eRequires standard hand tools (socket\/ratchet, torque wrench advisable)\u003c\/li\u003e\n  \u003cli\u003eReplaces worn or damaged 30-series driver pulleys quickly\u003c\/li\u003e\n  \u003cli\u003eVerify shaft size and clutch type prior to installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance or durability should I expect?\u003c\/h3\u003e\n\u003cp\u003eThis pulley is built as a replacement part intended to match OEM-style 30-series driveline behavior. It restores normal torque converter engagement and transfers engine power to the driven sheave; it is not a performance-modifying component by itself. Proper installation and correct pulley alignment will maintain expected durability under typical recreational use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores proper torque converter engagement for 30-series systems\u003c\/li\u003e\n  \u003cli\u003eSuitable for recreational go-kart and mini-bike use with compatible engines\u003c\/li\u003e\n  \u003cli\u003eNot intended as a high-performance upgrade or for overloaded applications\u003c\/li\u003e\n  \u003cli\u003eRegular inspection recommended to prevent wear-related failures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a go kart, mini bike, or other small utility vehicle that uses a 30-series torque converter and has a straight 3\/4\" crankshaft, this QYMOTO KT196 driver pulley kit is a practical replacement option. It’s aimed at DIY mechanics, small-vehicle repair shops and enthusiasts looking to replace a worn driver pulley with an affordable, ready-to-install component. Avoid ordering if your engine uses a different shaft diameter (for example a 16mm Hisun Coleman minibike crankshaft) or if you need a performance-specific pulley—confirm compatibility before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this pulley compatible with a 16mm Hisun Coleman minibike engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The KT196 fits a straight 3\/4\" crankshaft and is not compatible with 16mm Hisun Coleman minibike crankshafts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What hardware is included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes the 3\/4\" driver pulley, one metal washer spacer and one mounting bolt for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55167480889687,"sku":"B0CHJD9G6Q","price":61.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-driver-pulley-front-view.jpg?v=1790387234"},{"product_id":"qymoto-16mm-bore-10-tooth-centrifugal-clutch-for-ct200u-axis-200-40-41-420-chain-compatible-keyed-shaft","title":"QYMOTO 16mm Bore 10-Tooth Centrifugal Clutch for CT200U \/ Axis 200 — 40\/41\/420 Chain Compatible, Keyed Shaft","description":"\u003cp\u003e\u003cstrong\u003eQYMOTO 16mm bore 10-tooth centrifugal clutch is a direct-fit replacement designed for small 2–6.5 HP engines with a 16mm keyed shaft, built to work with 40\/41\/420 chain drive systems on Coleman CT200U, CT200U-EX, Axis 200 and similar mini bikes and go-karts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mini bike or go-kart uses a 16mm straight keyed crankshaft and a 3\/16\" keyway, this compact centrifugal clutch restores power transfer to a 40\/41\/420 chain drive without the need to modify the crank or drivetrain. The clutch is specifically a 10-tooth model and is NOT compatible with 3\/4\" or 5\/8\" bore CT200U models, so verify shaft diameter before purchase. The unit ships ready to install but requires a small amount of oil added before first use to ensure proper engagement and longevity.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm this clutch fits my engine?\u003c\/h3\u003e\n\u003cp\u003eFit depends on shaft diameter and keyway type, not just the bike model. Measure the crankshaft and inspect the keyway before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequired shaft: 16mm straight keyed shaft (not tapered).\u003c\/li\u003e\n  \u003cli\u003eKeyway: built-in 3\/16\" keyway in the crankshaft.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with: 3\/4\" or 5\/8\" bore CT200U variants.\u003c\/li\u003e\n  \u003cli\u003eCompatible engines: any 2–6.5 HP engines meeting the above specs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat drivetrain and chain sizes will this 10-tooth clutch work with?\u003c\/h3\u003e\n\u003cp\u003eThis QYMOTO clutch is engineered for common small-vehicle chain systems. It mates to sprockets sized for 40, 41, or 420 chains and is optimized for low-speed torque engagement typical of mini bikes and small go-karts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTooth count: 10T clutch face for compact sprocket mounting.\u003c\/li\u003e\n  \u003cli\u003eChain compatibility: 40, 41, and 420 chain systems.\u003c\/li\u003e\n  \u003cli\u003eApplication: primary drive on mini bikes and lightweight go-karts.\u003c\/li\u003e\n  \u003cli\u003eInstallation note: confirm sprocket alignment after fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and initial-use steps should I follow?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward but requires basic tools and attention to alignment. Follow these steps to ensure safe operation and long life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBefore installation: measure shaft diameter and keyway size.\u003c\/li\u003e\n  \u003cli\u003eMounting: slide onto keyed 16mm shaft and secure per engine manufacturer torque specs.\u003c\/li\u003e\n  \u003cli\u003eFirst use: add a few drops of oil into the clutch housing as recommended.\u003c\/li\u003e\n  \u003cli\u003eAfter install: test engagement at low throttle and re-check fasteners after first run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePackage contents include one 10-tooth centrifugal clutch. The unit is built for straightforward replacement use on compatible machines and does not include sprocket, chain, or mounting hardware beyond the clutch itself.\u003c\/p\u003e\n\n\u003cp\u003eWho is this for: This QYMOTO 16mm 10T centrifugal clutch is for DIY mechanics, hobbyists and small-vehicle owners who need a direct-replacement clutch for Coleman CT200U\/CT200U-EX, Axis 200, KT196 go-karts, or any small engine setup with a 16mm keyed crankshaft. It’s ideal for people who prefer a simple, bolt-on solution to restore drivetrain function without machining or complex modification. If your vehicle uses a 3\/4\" or 5\/8\" bore, choose a clutch matched to that shaft size instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this clutch fit my CT200U?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only if your CT200U has a 16mm straight keyed crankshaft with a 3\/16\" keyway; it does not fit 3\/4\" or 5\/8\" bore models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need any lubrication before using this clutch?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — add a small amount of oil into the clutch housing before first use to ensure proper engagement and break-in.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55167482626391,"sku":"B0CHFKNJ92","price":60.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-clutch-front-view.jpg?v=1790387304"},{"product_id":"qymoto-golf-cart-cover-2-passenger-for-ezgo-club-car-yamaha-94-5x47x65-in-420d-water-resistant","title":"QYMOTO Golf Cart Cover 2-Passenger for EZGO Club Car Yamaha — 94.5x47x65 in, 420D Water-Resistant","description":"\u003cp\u003e\u003cstrong\u003eQYMOTO's 2-passenger golf cart cover is a heavy-duty, water-resistant full cover sized 94.5x47x65 inches to protect most two-seat EZGO, Club Car and Yamaha golf carts from rain, sun, dust and debris.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your two-seat golf cart ready for the next round with a cover designed to withstand weather and wear. Made from 420D polyester with a water-resistant coating, this full-length cover slips over carts up to 94.5 by 47 by 65 inches and includes zipper access, ventilation, and secure buckles so the cover stays put in changing conditions.\u003c\/p\u003e\n\n\u003ch3\u003eWill this cover fit my 2-seat golf cart?\u003c\/h3\u003e\n\u003cp\u003eThe cover measures 94.5 x 47 x 65 inches (240 x 120 x 165 cm) and is tailored for most two-person carts. It’s compatible with common models such as EZGO, Club Car Precedent, and Yamaha two-seaters, but you should measure your cart to confirm a snug fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull dimensions: 94.5 x 47 x 65 inches.\u003c\/li\u003e\n  \u003cli\u003eDesigned for most 2-person golf carts and 2-seat configurations.\u003c\/li\u003e\n  \u003cli\u003eWorks with EZGO, Club Car Precedent, Yamaha two-seater models.\u003c\/li\u003e\n  \u003cli\u003eMeasure horn-to-rear and wheel-to-wheel to verify compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the cover protect my cart from weather and wear?\u003c\/h3\u003e\n\u003cp\u003eThe heavy-duty 420D polyester fabric resists tearing and sheds water thanks to a protective coating, keeping moisture, dust, branches and UV exposure from reaching the cart’s surfaces. Two belly buckles secure the cover against wind while reinforced stitching helps resist abrasion from repeated use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e420D polyester with water-resistant coating for rain and snow protection.\u003c\/li\u003e\n  \u003cli\u003eTear-resistant weave and reinforced seams for long-term durability.\u003c\/li\u003e\n  \u003cli\u003eTwo belly buckle straps front and rear to secure in windy weather.\u003c\/li\u003e\n  \u003cli\u003eCoating reduces UV fading and blocks dust and debris.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat convenience features help with everyday use?\u003c\/h3\u003e\n\u003cp\u003eBuilt-in zippers provide easy driver-side and rear access so you don’t have to remove the entire cover to reach equipment or step into the cart. Two air vents improve airflow and reduce heat and moisture buildup, helping prevent mildew and condensation under the cover.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDriver-side zipper and rear zipper door for quick access.\u003c\/li\u003e\n  \u003cli\u003eDual air vents for ventilation and reduced overheating.\u003c\/li\u003e\n  \u003cli\u003eEasy on\/off design for fast installation and removal.\u003c\/li\u003e\n  \u003cli\u003eIncludes a storage bag to keep the cover tidy when not in use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I clean and maintain the cover?\u003c\/h3\u003e\n\u003cp\u003eMaintenance is simple: wipe away dirt and stains with a soft, damp cloth and allow the cover to air dry. Avoid machine washing or harsh solvents to protect the water-resistant coating; store the cover in its supplied bag when dry to prevent mildew and extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpot-clean with a soft wet cloth; air dry fully before storage.\u003c\/li\u003e\n  \u003cli\u003eAvoid bleach, strong detergents, or machine washing.\u003c\/li\u003e\n  \u003cli\u003eStore dry in the included storage bag to prevent odors and mildew.\u003c\/li\u003e\n  \u003cli\u003eCheck straps and zippers periodically for wear and secure fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Golfers and fleet operators who own two-seat EZGO, Club Car Precedent or Yamaha golf carts and want a durable, practical full cover to protect vehicles from sun, rain, dust and incidental damage. It’s best for users who need quick access via zippers, improved ventilation to reduce moisture buildup, and a cover that fastens securely in breezy conditions. Verify your cart’s dimensions before purchasing to ensure the proper fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the cover waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The cover has a water-resistant coating that sheds rain and snow but is not fully submersible waterproof.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I access my cart without removing the cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Driver-side and rear zippers allow quick entry and access to gear without removing the whole cover.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55168332136791,"sku":"B0D3HBTCW8","price":69.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-golf-cart-cover-front-view.jpg?v=1790400561"},{"product_id":"qymoto-420d-large-atv-cover-xxl-2-up-weatherproof-uv-resistant-heavy-duty-quad-cover","title":"QYMOTO 420D Large ATV Cover XXL 2-UP — Weatherproof, UV-Resistant Heavy-Duty Quad Cover","description":"\u003cp\u003e\u003cstrong\u003eQYMOTO's 420D Large ATV Cover is a heavy-duty, weather-resistant protective cover sized to shield most 2-up and wide ATVs, including front and rear racks and cargo boxes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your quad clean and secure between rides with a specifically shaped cover built from 420D Oxford fabric. This cover balances rugged outdoor protection with a light enough weight for one person to fit and remove. Reinforced stitching, an elastic hem, belly strap and front\/rear draw edges help the cover stay put in wind, rain, sun and snow while fitting over mirrors and accessories.\u003c\/p\u003e\n\n\u003ch3\u003eWill this cover fit my large or two-up ATV?\u003c\/h3\u003e\n\u003cp\u003eYes — the QYMOTO XXL cover is made to accommodate most large and wide ATVs, including two-up seating and extra accessories. Its dimensions and generous cut are intended to clear racks, cargo boxes and mirrors without stretching thin areas.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDimensions: 91\" length × 49\" width × 51\" height to cover most large quads\u003c\/li\u003e\n  \u003cli\u003eCompatible examples: Can-Am Outlander, Polaris Sportsman, CFMOTO CForce, Yamaha Grizzly\u003c\/li\u003e\n  \u003cli\u003eFits accessories: front\/rear racks, cargo boxes, mirrors and two seats\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the material protect my ATV from weather and UV?\u003c\/h3\u003e\n\u003cp\u003eThe cover uses 420D Oxford fabric, a thick woven material that resists tears and slows UV degradation. It sheds rain and snow and helps block sunlight that can fade plastics and seats. Reinforced seams increase longevity where wear is most likely.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e420D Oxford fabric for abrasion and tear resistance\u003c\/li\u003e\n  \u003cli\u003eWater-shedding surface to keep moisture off body panels\u003c\/li\u003e\n  \u003cli\u003eUV-resistant weave reduces fading and sun damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow secure is the cover in windy conditions?\u003c\/h3\u003e\n\u003cp\u003eSecurity features minimize flapping and prevent the cover from blowing off. A fitted elastic hem, front and rear elastic edges, plus a belly strap allow you to cinch the cover close to the ATV’s frame. Heavy-duty stitching and a snug cut reduce sagging pockets that catch wind.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eElastic hem and front\/rear draw edges lock the cover to the vehicle\u003c\/li\u003e\n  \u003cli\u003eBelly strap fastens under the ATV to prevent lift in gusts\u003c\/li\u003e\n  \u003cli\u003eReinforced stitching at stress points for extra durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the cover easy to use and store when not in use?\u003c\/h3\u003e\n\u003cp\u003eQYMOTO designed the cover to be handled by one person — it’s lightweight enough for a single user yet sturdy for long-term outdoor protection. When not in use, the cover folds into the supplied storage bag for compact, organized storage in a garage or shed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLight enough for solo on\/off installation\u003c\/li\u003e\n  \u003cli\u003eComes with a storage bag for neat packing and transport\u003c\/li\u003e\n  \u003cli\u003eSimple shape for quick folding and stowing between rides\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The QYMOTO 420D Large ATV Cover is aimed at ATV owners who need a robust, all-weather solution for larger two-up and wide 4-wheelers. It’s a practical pick for riders who park outdoors or store their quad seasonally and want reliable protection for bodywork, seats and mounted accessories without wrestling a heavy tarp.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What size ATVs does this cover fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits most large and wide ATVs, including two-up quads; measures 91\"×49\"×51\".\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the cover waterproof and UV resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 420D Oxford fabric sheds water and offers UV resistance, though it's not a sealed waterproof membrane.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55168803012951,"sku":"B0CJM688ZH","price":65.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-atv-cover-front-view.jpg?v=1790414297"},{"product_id":"qymoto-cfmoto-cvt-drive-belt-0180-055000-for-cforce-600-5-layer-oem-fit-heat-resistant","title":"QYMOTO CFMOTO CVT Drive Belt 0180-055000 for CForce 600 — 5-Layer OEM Fit, Heat-Resistant","description":"\u003cp\u003e\u003cstrong\u003eQYMOTO's CFMOTO CVT Drive Belt 0180-055000 is a direct-fit, 5-layer replacement belt engineered to restore reliable power transfer for CFMOTO UTVs and ATVs like the CForce 600 without modifications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis drive belt is manufactured to OEM dimensions and tooth profile, offering a plug-and-play swap for compatible CFMOTO models. Built with five reinforced layers and heat-resistant compounds, it resists stretching and cracking under sustained load and high temperatures common in off-road CVT compartments. Each belt is tension- and fatigue-tested at the factory to ensure consistent performance on trails, work sites, and long tours.\u003c\/p\u003e\n\n\u003ch3\u003eWill this belt fit my CFMOTO model and year?\u003c\/h3\u003e\n\u003cp\u003eThe QYMOTO 0180-055000 matches OE dimensions and tooth profile for many CFMOTO models—designed for direct replacement without trimming or reshaping. Confirm compatibility by cross-referencing your vehicle's part number and year before purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect OE dimension match to part number 0180-055000\u003c\/li\u003e\n\u003cli\u003eCommon fitment: CForce 400\/450L\/500\/600\/625 and UForce\/ZForce families\u003c\/li\u003e\n\u003cli\u003eIncludes fit notes for Z6 (2012–2014) and other model years—check listing details\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the 5-layer construction improve durability?\u003c\/h3\u003e\n\u003cp\u003eThe five-layer design combines tensile cords, abrasion-resistant backing, and a heat-stable compound to control elongation and tooth wear. This structure keeps the belt stable under torque, reduces pulley wear, and extends service intervals compared with low-layer aftermarket belts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReinforced cords prevent premature stretching under load\u003c\/li\u003e\n\u003cli\u003eHeat-resistant compound resists hardening and cracking\u003c\/li\u003e\n\u003cli\u003eOptimized tooth profile for smoother pulley engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits can I expect off-road?\u003c\/h3\u003e\n\u003cp\u003eExpect consistent power transfer during heavy-load conditions like hill climbs, towing, muddy runs, and extended tours. The belt's thermal stability and precise tooth contact help minimize power loss and reduce clutch and pulley wear for more reliable trail performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStable elasticity under sustained high temperatures\u003c\/li\u003e\n\u003cli\u003eReduced power loss from improved tooth contact\u003c\/li\u003e\n\u003cli\u003eBetter resistance to abrasion and environmental stressors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo I need special tools or inspections when installing?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for a trained mechanic because the belt is dimension-matched to OEM specifications. Professional installation and a clutch inspection are recommended to verify pulley alignment and maximize the belt's service life.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReady for installation—no belt modification needed\u003c\/li\u003e\n\u003cli\u003eFactory tension and fatigue-tested before shipping\u003c\/li\u003e\n\u003cli\u003eRecommend clutch and pulley inspection during replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders, fleet managers, and service technicians who own or maintain compatible CFMOTO ATVs and UTVs and need a durable, OEM-dimension replacement belt. It's suited to off-road enthusiasts who demand stable performance under heat and load, as well as commercial users carrying cargo or towing regularly. If you require an OE-sized belt that installs without modification and prioritizes longevity and consistent tooth engagement, this QYMOTO replacement is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this belt a direct replacement for part 0180-055000?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The QYMOTO belt is dimension-matched to OE part 0180-055000 for direct installation without trimming.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this belt handle heavy towing and long rides?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Its 5-layer construction and thermal stability resist stretching and cracking under sustained loads.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55169083867479,"sku":"B09KZM9618","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-cfmoto-drive-belt-front-packaging.jpg?v=1790418184"},{"product_id":"qymoto-15-ct200u-ex-mini-bike-seat-replacement-cushion-black-pu-leather-abs-base","title":"QYMOTO 15\" CT200U-EX Mini Bike Seat Replacement Cushion — Black PU Leather, ABS Base","description":"\u003cp\u003e\u003cstrong\u003eQYMOTO’s 15\" CT200U-EX seat is an upgraded replacement cushion for Coleman CT200U EX mini bikes, featuring a durable ABS base, resilient foam padding and black synthetic leather for a comfortable, long-lasting ride.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a direct-fit upgrade or DIY swap for CT200U EX owners, this 15-inch cushion balances comfort, durability and simple installation. The cover uses thick PU-style synthetic leather and tight stitching to resist wear, while the high-resilience foam preserves support over time. A rigid ABS seat plate underpins the assembly and included mounting bolts keep installation straightforward.\u003c\/p\u003e\n\n\u003ch3\u003eWill this seat fit my Coleman CT200U EX or similar mini bike?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the cushion is built to match the Coleman CT200U EX seat dimensions and mounting pattern, making it a straightforward replacement. Riders with slightly different frames can also adapt the pad for a DIY install if needed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExact fit for Coleman CT200U EX model mounting points\u003c\/li\u003e\n  \u003cli\u003e15-inch cushion diameter suitable for standard mini bike saddles\u003c\/li\u003e\n  \u003cli\u003eCompatible with minor customizations for other mini bike frames\u003c\/li\u003e\n  \u003cli\u003eIncludes mounting bolts to simplify swap-in process\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow comfortable and durable is the QYMOTO cushion for regular rides?\u003c\/h3\u003e\n\n\u003cp\u003eThe seat uses dense resilient foam that disperses pressure and retains shape longer than thin pads. The thick synthetic PU leather and reinforced stitching help the cover resist scuffs, moisture and fading from regular outdoor use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-resilience foam core for sustained comfort\u003c\/li\u003e\n  \u003cli\u003eThick black synthetic leather resists abrasion and weathering\u003c\/li\u003e\n  \u003cli\u003eSolid ABS seat plate prevents flex under load\u003c\/li\u003e\n  \u003cli\u003eStitched seams add long-term durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation — do I need special tools?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is designed to be simple: the seat ships with the necessary mounting bolts and matches the CT200U EX mounting layout. Basic hand tools like a wrench or socket set are usually sufficient, and the seat’s rigid base helps align fasteners quickly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMounting bolts included in package\u003c\/li\u003e\n  \u003cli\u003eStandard wrench or socket required — no special tools\u003c\/li\u003e\n  \u003cli\u003eRigid ABS base simplifies bolt alignment\u003c\/li\u003e\n  \u003cli\u003eDIY-friendly for quick swaps or re-cover projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance extends the life of this mini bike seat?\u003c\/h3\u003e\n\n\u003cp\u003eKeeping the synthetic leather clean and protected from prolonged sun or moisture will prolong service life. Regularly check and tighten mounting bolts and wipe the cover with mild soap and water; avoid harsh solvents that can degrade the material.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWipe clean with mild soap and water\u003c\/li\u003e\n  \u003cli\u003eStore bike sheltered from prolonged sun and rain\u003c\/li\u003e\n  \u003cli\u003eCheck and retorque bolts periodically\u003c\/li\u003e\n  \u003cli\u003eConsider pairing with a QYMOTO seat cover for added protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders of Coleman CT200U EX mini bikes seeking a sturdier, more comfortable OEM-style replacement or owners completing a restoration or custom mini bike build. It’s a good match for DIY mechanics who want an easy-to-install cushion with a robust ABS base, thicker foam and a weather-resistant synthetic leather finish for daily use or occasional trail runs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this seat include mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the QYMOTO CT200U-EX seat comes with the required mounting bolts for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this seat on mini bikes other than the CT200U EX?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s designed for CT200U EX fitment but can be adapted for other mini bikes with minor DIY modifications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55171229122903,"sku":"B0DT4BK3VZ","price":68.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-ct200uex-front-view.jpg?v=1790440986"},{"product_id":"qymoto-zippered-utv-cover-for-4-6-seater-crew-side-by-side-420d-waterproof-uv-resistant-with-side-zipper","title":"QYMOTO Zippered UTV Cover for 4–6 Seater Crew Side-by-Side — 420D Waterproof, UV-Resistant with Side Zipper","description":"\u003cp\u003e\u003cstrong\u003eThe QYMOTO Zippered UTV Cover protects 4–6 seat side-by-side vehicles from sun, rain, wind and snow with a heavy-duty 420D waterproof fabric and a convenient side zipper for easy access.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eStore your crew UTV outdoors without constant worry: this cover blends reinforced material and windproof fittings to shield large machines from fading, moisture and debris. Designed to fit a wide range of models — from Polaris and Can-Am to Honda and Kawasaki — it aims to reduce weather wear while simplifying installation and day-to-day access.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the material hold up against sun, rain and snow?\u003c\/h3\u003e\n\u003cp\u003eThe cover is built from a thick 420D polyester weave treated for water resistance and UV stability, reducing fading and fabric breakdown over time. Double-stitched seams increase durability at stress points so the cover stands up to repeated outdoor use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e420D heavy-duty waterproof polyester with UV-resistant coating\u003c\/li\u003e\n  \u003cli\u003eDouble stitching on seams for increased longevity\u003c\/li\u003e\n  \u003cli\u003eDesigned to shed rain and snow to keep the interior dry\u003c\/li\u003e\n  \u003cli\u003eSuitable for prolonged outdoor storage use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it stay put in windy or stormy conditions?\u003c\/h3\u003e\n\u003cp\u003eTo prevent the cover from blowing off, QYMOTO includes adjustable windproof straps and a secure hem design to cinch the cover tightly. Those fastenings help the cover hold through gusts, heavy rain and moderate snowfall when properly installed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable straps to anchor the cover to the vehicle frame\u003c\/li\u003e\n  \u003cli\u003eSnug hem reduces wind lift and flapping\u003c\/li\u003e\n  \u003cli\u003eThicker fabric resists being tossed by strong breezes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the zipper design improve everyday use?\u003c\/h3\u003e\n\u003cp\u003eThe side zipper gives fast access to the cockpit without removing the entire cover, useful for quick checks, battery maintenance, or loading small items. The zipper runs the length of the side to create a comfortable entry point while the rest of the cover stays in place.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSide zipper for easy entry and partial removal\u003c\/li\u003e\n  \u003cli\u003eSaves time versus totally removing and refitting the cover\u003c\/li\u003e\n  \u003cli\u003eHelps preserve seals and straps by minimizing handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich UTV models and sizes will this cover fit?\u003c\/h3\u003e\n\u003cp\u003eQYMOTO targets larger crew-style UTVs with 4 to 6 seats and lists compatibility with many popular models and brands. Its universal cut and adjustable securements help accommodate various dimensions common to crew UTVs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 4–6 seater side-by-sides and many crew UTVs\u003c\/li\u003e\n  \u003cli\u003eCompatible with Polaris, Can-Am, Yamaha, Kawasaki, Honda and similar machines\u003c\/li\u003e\n  \u003cli\u003eDesigned for XL and crew configurations like Uforce, Commander, Defender, Teryx, Pioneer and General series\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders, fleet owners, and outdoor storage users who park crew UTVs outside and want a durable, easy-to-use cover that reduces sun fade, moisture damage and wind-related displacement. If you need a heavy-duty option with quick-access convenience and broad model compatibility, the QYMOTO zippered cover is built to meet those needs. The package includes one outdoor heavy-duty cover and QYMOTO customer support if questions arise.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this cover fit a Polaris General 1000 4-seater?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The QYMOTO cover is designed to fit many 4–6 seat crew UTVs, including Polaris General 1000 4-seat models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the cover year-round outdoors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 420D fabric is UV resistant and waterproof, with straps to secure it through rain, snow and wind.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QYMOTO","offers":[{"title":"Default Title","offer_id":55172245946711,"sku":"B0CG61PJ2G","price":105.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qymoto-front-full-coverage.jpg?v=1790450620"}],"url":"https:\/\/britishgarage.co.uk\/collections\/qymoto.oembed","provider":"British Garage","version":"1.0","type":"link"}