{"title":"ROADFORMER","description":"\u003cp\u003eBrowse 38 ROADFORMER products at British Garage, including belts, hoses \u0026amp; pulleys, exhaust \u0026amp; emissions parts and engine parts. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked UK delivery on every order and 30-day returns.\u003c\/p\u003e","products":[{"product_id":"roadformer-t-bolt-hose-clamp-1-5-41-48mm-2-pack-304-stainless-3-4-wide-band","title":"ROADFORMER T-Bolt Hose Clamp 1.5\" (41–48mm) 2-Pack — 304 Stainless, 3\/4\" Wide Band","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 1.5 in T-Bolt Hose Clamp (41–48mm) is a heavy-duty, 304 stainless-steel clamp engineered to deliver even, corrosion-resistant sealing for 1.5\" nominal I.D. hoses in automotive and industrial applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis two-pack of ROADFORMER T-bolt hose clamps fits hoses with outer diameters between 41 mm and 48 mm (1.61\"–1.89\") and is built for long-term reliability. Constructed from 304 stainless steel with a 3\/4\" wide band, a floating bridge and nylon-insert locknut, these clamps protect silicone and rubber hoses while providing uniform compression across joints. They are sized for standard 1.5\" inner-diameter hoses with roughly 2–5 mm wall thickness—measure your hose O.D. before ordering to ensure the correct fit.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps protect silicone and rubber hoses?\u003c\/h3\u003e\n\u003cp\u003eThe ROADFORMER clamp uses a smooth, rounded 3\/4\" band and a floating bridge to reduce sharp contact points that can cut or deform hose material. The broad band spreads clamping force evenly so the hose wall sees less concentrated stress.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/4\" wide 304 stainless steel band minimizes pinch and abrasion.\u003c\/li\u003e\n  \u003cli\u003eRounded edges prevent cutting into soft hose materials.\u003c\/li\u003e\n  \u003cli\u003eFloating bridge distributes pressure evenly across the seal.\u003c\/li\u003e\n  \u003cli\u003eNylon-insert locknut resists vibration loosening for sustained sealing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these clamps resist corrosion in automotive or marine environments?\u003c\/h3\u003e\n\u003cp\u003eYes—the clamps are made from 304 stainless steel components chosen for corrosion resistance in typical automotive, marine and industrial settings. While 304 resists rust and oxidation, routine inspections are recommended for harsh saltwater or chemically aggressive environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e304 stainless steel band and T-bolt for general corrosion protection.\u003c\/li\u003e\n  \u003cli\u003eStainless fasteners and locknut reduce galvanic and surface corrosion.\u003c\/li\u003e\n  \u003cli\u003eSuitable for under-hood, intercooler and coolant system use with routine checks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I choose and install the correct size for my hose?\u003c\/h3\u003e\n\u003cp\u003eMeasure the hose outer diameter (O.D.) where the clamp will sit; these clamps accept 41–48 mm O.D., matching nominal 1.5\" I.D. hoses with 2–5 mm wall thickness. Installation is straightforward—position the clamp, align the floating bridge over the connection, and tighten the T-bolt with a wrench until the hose seals without distortion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck hose O.D. rather than inner diameter if in doubt.\u003c\/li\u003e\n  \u003cli\u003eSlide clamp over hose, seat over barb or fitting, and tighten evenly.\u003c\/li\u003e\n  \u003cli\u003eAvoid overtightening—snug until leak-free, then torque to recommended spec if available.\u003c\/li\u003e\n  \u003cli\u003eUse common hand tools (wrench or socket) for fast installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat applications suit ROADFORMER T-bolt clamps?\u003c\/h3\u003e\n\u003cp\u003eThese clamps are built for demanding connections where strong, uniform sealing matters—turbocharger couplers, intake piping, intercoolers, coolant and radiator hoses, plus many industrial or agricultural hoses. They work well where vibration and pressure fluctuations require a secure, durable clamp.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurbo and intercooler couplings for boosted engines.\u003c\/li\u003e\n  \u003cli\u003eIntake and radiator hose connections in cars, trucks and equipment.\u003c\/li\u003e\n  \u003cli\u003eMarine, off-road and agricultural hose joints that see vibration.\u003c\/li\u003e\n  \u003cli\u003eIndustrial machinery requiring wider band clamps for even sealing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ROADFORMER 1.5 in T-bolt Hose Clamp 2-pack is ideal for mechanics, vehicle enthusiasts, fleet maintainers and equipment operators who need dependable, corrosion-resistant hose clamping for 1.5\" nominal hoses. Choose this set if you want a broader band, heavy-duty T-bolt design that lessens hose damage and holds up under vibration and repeated use. Measure your hose O.D. first to ensure a proper fit within the 41–48 mm range.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What hose sizes do these clamps fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit hose outer diameters from 41 mm to 48 mm (1.61\"–1.89\"), for 1.5\" nominal I.D. hoses with ~2–5 mm wall thickness.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these clamps corrosion resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, components are 304 stainless steel for good general corrosion resistance; inspect frequently in saltwater or harsh chemical environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55160999575895,"sku":"B0F4KGHV1T","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging-t-bolt-clamp.jpg?v=1790320469"},{"product_id":"roadformer-5-inch-exhaust-band-clamp-5-00-lap-joint-304-stainless-1-pack","title":"ROADFORMER 5-inch Exhaust Band Clamp — 5.00\" Lap-Joint, 304 Stainless, 1-Pack","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER's 5-inch 304 stainless steel lap-joint band clamp is a corrosion-resistant exhaust connector designed to join a 5\" OD pipe into a 5\" ID pipe for leak-resistant, no-weld repairs and installations.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis single-pack exhaust clamp was engineered to solve common fit and leak issues when joining overlapping exhaust tubing. Made from 304 stainless steel with heavy-duty fasteners and a wide band profile, it distributes clamping force evenly to reduce distortion and provide a tighter seal than many U-bolt-style clamps. The clamp ships pre-assembled with a protective film on the band for corrosion protection during storage and should be removed prior to installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this clamp stop exhaust leaks better than a U-bolt clamp?\u003c\/h3\u003e\n\u003cp\u003eThe lap-joint band wraps continuously around the pipe circumference so torque from the fastener is shared across a broader surface. That reduces high-pressure points that can deform pipe ends and create gaps. The result is a more uniform seal and improved resistance to leaks from vibration and heat cycling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWide band design spreads clamping force evenly\u003c\/li\u003e\n  \u003cli\u003e304 stainless steel resists corrosion in hot, wet conditions\u003c\/li\u003e\n  \u003cli\u003eLap-joint geometry minimizes pipe distortion compared with U-bolts\u003c\/li\u003e\n  \u003cli\u003eSingle-bolt tightening for consistent compression\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this clamp fit my 5\" exhaust pipes and how do I measure?\u003c\/h3\u003e\n\u003cp\u003eThis clamp is sized specifically for a 5\" outer diameter (OD) pipe fitting into a 5\" inner diameter (ID) pipe using an overlapping lap joint. Verify your pipes by measuring the OD of the male pipe and the ID of the receiving pipe; both must be approximately 5.0\" for proper fit. If your pipes are dented, rusted, or have weld build-up, clean and remeasure before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 5.00\" OD into 5.00\" ID lap-joint connections\u003c\/li\u003e\n  \u003cli\u003eMeasure with calipers or a tape at multiple points for accuracy\u003c\/li\u003e\n  \u003cli\u003eEnsure mating surfaces are free of heavy corrosion or debris\u003c\/li\u003e\n  \u003cli\u003eWorks with mufflers, downpipes, resonators, elbows, and flex pipes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and will I need special tools?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and requires only common hand tools — typically a ratchet and socket or wrench to tighten the fastener. The clamp is pre-assembled so you can position it over the lap joint, align the pipes, and torque the bolt to achieve a snug, leak-minimizing seal. The clamp also removes easily for future maintenance or adjustments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo welding required — ideal for repair and retrofit work\u003c\/li\u003e\n  \u003cli\u003ePre-assembled hardware speeds fitting and alignment\u003c\/li\u003e\n  \u003cli\u003eStandard sockets\/wrenches work for tightening and removal\u003c\/li\u003e\n  \u003cli\u003eRemovable for service, replacement, or repositioning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the clamp in exhaust environments?\u003c\/h3\u003e\n\u003cp\u003eConstructed from 304 stainless steel for the band and high-strength fasteners, the clamp is built to withstand high heat, moisture, and road salt exposure common to exhaust systems. The protective film on the band helps prevent corrosion during shipping and storage; remove it before tightening to ensure proper metal-to-metal contact. For extremely harsh or long-term marine environments, consider higher alloy grades or supplemental coatings where necessary.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e304 stainless resists rust and oxidation at elevated temperatures\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty fasteners maintain clamp integrity under vibration\u003c\/li\u003e\n  \u003cli\u003eProtective film prevents storage corrosion—remove before use\u003c\/li\u003e\n  \u003cli\u003eSuitable for automotive, truck, and performance exhaust systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this clamp for? If you repair or modify exhaust systems—whether for passenger cars, trucks, performance builds, or DIY muffler work—and you need a reliable, removable, and corrosion-resistant 5\" lap-joint connector, this ROADFORMER clamp is built for that purpose. It’s especially useful when welding is impractical or when you want a cleaner, serviceable joint that minimizes pipe distortion and reduces leaks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this clamp fit any 5\" exhaust pipe?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits a 5.00\" OD pipe into a 5.00\" ID lap-joint connection; measure both pipes for confirmation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to weld this clamp to the pipe?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—this clamp installs with hand tools and is removable for service or adjustments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55161015271767,"sku":"B073ZD65PL","price":45.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-exhaust-clamp-front.jpg?v=1790320933"},{"product_id":"roadformer-1-stainless-steel-worm-gear-hose-clamps-19-38mm-10-pack-corrosion-resistant-precision-fit","title":"ROADFORMER 1\" Stainless Steel Worm-Gear Hose Clamps 19–38mm (10-Pack) — Corrosion-Resistant, Precision Fit","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 1 inch hose clamp is a full 300-series stainless steel worm-gear clamp that secures hoses and tubing from 19mm to 38mm (0.75\"–1.5\") and comes in a 10-piece set.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered for corrosion resistance and reliable fastening, these all-stainless hose clamps combine a precision-milled worm gear with a corrosion-resistant band and housing. Each clamp delivers smooth, incremental tightening for a snug seal on automotive, marine, agricultural and general-purpose hoses. Packaged as a set of ten, they offer consistent performance for projects that require multiple secure connections.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this clamp adjust to different hose sizes?\u003c\/h3\u003e\n\u003cp\u003eThe internal worm gear lets you vary the clamp diameter precisely across its working range of 19mm to 38mm (0.75\"–1.5\"). Turn the slotted hex-head screw to tighten or loosen the band for a custom fit and uniform pressure around the hose.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking range: 19mm–38mm (0.75\"–1.5\").\u003c\/li\u003e\n  \u003cli\u003e5\/16\" slotted hex head for common hand tools or drivers.\u003c\/li\u003e\n  \u003cli\u003eSmooth, step-free adjustment for exact hose seating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eAll load-bearing parts — band, housing and screw — are made from 300-series stainless steel, chosen for its rust resistance and long service life in wet or outdoor environments. The full-steel construction reduces galling and extends clamp life compared with plated or mixed-metal designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e300-series stainless steel band, housing and screw for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eDesigned for indoor, outdoor and marine exposure.\u003c\/li\u003e\n  \u003cli\u003eDurable under repeated installation and removal cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow tight do these clamps get and how should I install them?\u003c\/h3\u003e\n\u003cp\u003eThese clamps offer a reliable tightening range: recommended installation torque is about 35–45 in·lbs (4.0–5.1 Nm), with minimum ultimate torque capability around 60 in·lbs (6.8 Nm). Use a proper screwdriver or a 5\/16\" driver and avoid over-torquing to prevent band deformation or hose damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstallation torque: 35–45 in·lbs (4.0–5.1 Nm).\u003c\/li\u003e\n  \u003cli\u003eMinimum ultimate torque: ~60 in·lbs (6.8 Nm).\u003c\/li\u003e\n  \u003cli\u003eUse common hand tools; tighten until snug, not crushed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere are these clamps best applied?\u003c\/h3\u003e\n\u003cp\u003eTheir corrosion-resistant construction and adjustable range make them suitable across many industries: automotive hose lines, garden and irrigation fittings, HVAC ductwork, marine bilge hoses and general household plumbing. They perform well in both temporary repairs and permanent installations where stainless hardware is preferred.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomotive hose connections and vacuum lines.\u003c\/li\u003e\n  \u003cli\u003eMarine and boat bilge, fuel and coolant hoses.\u003c\/li\u003e\n  \u003cli\u003eAgricultural equipment, irrigation and workshop use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: technicians, mechanics, boat owners, DIYers and maintenance professionals who need dependable stainless-steel hose clamps in a convenient multi-pack. If you want corrosion-resistant clamps that offer precise adjustment, consistent torque capacity and enough quantity for several installations, this 10-piece ROADFORMER set is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these clamps rust in saltwater environments?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Made from 300-series stainless steel, they resist rust and are suitable for many marine conditions, though rinsing after heavy salt exposure extends life.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these clamps on fuel lines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They work on many fuel hoses, but confirm compatibility with your hose material and fuel type before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55161059508567,"sku":"B086MHPYHX","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging.jpg?v=1790321396"},{"product_id":"roadformer-t-bolt-hose-clamp-1-62-1-85-o-d-1-75-nominal-2-pack-304-stainless-nylon-locknut","title":"ROADFORMER T-Bolt Hose Clamp 1.62\"–1.85\" O.D. (1.75\" Nominal) 2-Pack — 304 Stainless, Nylon Locknut","description":"\u003cp\u003e\u003cstrong\u003eRoadformer 1.75\" T-bolt hose clamps are heavy-duty stainless-steel clamps that secure 1.62\"–1.85\" (41–47mm) outer-diameter hoses for turbo, intercooler, radiator and coolant connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two-pack T-bolt clamps are built from 304 stainless steel with a floating bridge and nylon-insert locknut, engineered to resist rust and maintain even pressure under vibration and high pressure. They are intended for use on silicone, rubber and reinforced hoses where a wide, reliable sealing band is required. Before ordering, measure the hose outer diameter (O.D.) — not the inner diameter — to confirm fit.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps stay secure under high pressure and vibration?\u003c\/h3\u003e\n\u003cp\u003eThe T-bolt design gives a large contact area and a solid bolt axis that prevents slippage when tightened. The floating bridge lets the band align itself as torque is applied, spreading clamping force evenly across the hose to reduce hot spots and leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e304 stainless steel band resists corrosion in harsh conditions\u003c\/li\u003e\n  \u003cli\u003e1\/4\"-28 stainless bolt provides robust, repeatable tightening\u003c\/li\u003e\n  \u003cli\u003eFloating bridge evens pressure to protect hose material\u003c\/li\u003e\n  \u003cli\u003eNylon-insert locknut keeps the set torque from backing off\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size hoses will fit these 1.75\" clamps?\u003c\/h3\u003e\n\u003cp\u003eThese clamps are sized for hose outer diameters between 1.62\" and 1.85\" (41–47mm). That O.D. range corresponds to hoses commonly used on small intercooler lines, intake plumbing and coolant or heater hoses on many vehicles and equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck your hose outer diameter (O.D.), not inner diameter (I.D.)\u003c\/li\u003e\n  \u003cli\u003eFits hoses commonly labeled 1.75\" in nominal size when measured externally\u003c\/li\u003e\n  \u003cli\u003eWorks well on silicone, rubber, and reinforced hose constructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: slide the clamp over the hose, position it over the barb or fitting, then tighten the bolt until the clamp compresses evenly. Common hand tools like a 7\/16\" or 11mm wrench or a socket will handle the 1\/4\"-28 bolt; no specialty tools are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlip-on placement and simple bolt tightening\u003c\/li\u003e\n  \u003cli\u003eUse standard wrench or socket for repeatable torque\u003c\/li\u003e\n  \u003cli\u003eRounded band edges help prevent hose damage during installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere are these T-bolt clamps typically used?\u003c\/h3\u003e\n\u003cp\u003eRoadformer T-bolt clamps are specified where a uniform, high-strength clamp is needed: turbocharger hoses, intercooler piping, radiator and coolant hose connections, heavy trucks, and industrial equipment. Their corrosion resistance and locking nut make them suitable for long-term, high-vibration environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurbo and intercooler charge lines that face boost pressure\u003c\/li\u003e\n  \u003cli\u003eRadiator, heater and coolant hoses in automotive and industrial systems\u003c\/li\u003e\n  \u003cli\u003eAgricultural and off-road machinery exposed to dirt and moisture\u003c\/li\u003e\n  \u003cli\u003eApplications requiring repeated removal and reliable resealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These Roadformer clamps are aimed at mechanics, performance tuners, fleet maintenance teams and DIYers who need dependable, corrosion-resistant hardware for critical hose connections. If you work on turbo systems, cooling circuits, or heavy equipment and require a wide, sturdy clamp that holds torque under stress, this two-pack of 1.75\" T-bolt clamps provides a practical, durable solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these clamps fit a 1.75\" hose I measured by inside diameter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These clamps fit hoses with a 1.62\"–1.85\" outer diameter. Measure O.D. not I.D. before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the clamps corrosion resistant for marine or salty conditions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The band and bridge are 304 stainless steel, offering good resistance to rust and corrosion.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55161641926999,"sku":"B07M8BCRKN","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging-two-pack.jpg?v=1790330645"},{"product_id":"roadformer-2-t-bolt-hose-clamps-2-pack-1-81-2-05-o-d-304-stainless-steel-nylon-locknut","title":"ROADFORMER 2\" T-Bolt Hose Clamps, 2-Pack — 1.81\"–2.05\" O.D., 304 Stainless Steel, Nylon Locknut","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 2-inch T-bolt hose clamps are heavy-duty stainless-steel clamps sized to fit hose outer diameters from 1.81\" to 2.05\" (46–52mm), sold as a 2-pack for secure turbo, intercooler, radiator, and coolant hose connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese clamps are built for repeated use where vibration, pressure, and long service life matter. Constructed with a 304 stainless-steel band, a 1\/4\"-28 stainless bolt, a floating bridge, and a nylon-insert locknut, the clamps combine strength with smooth edges to protect silicone and rubber hoses. They are intended for automotive and industrial applications that need consistent clamping force and corrosion resistance.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps hold up under vibration and high pressure?\u003c\/h3\u003e\n\u003cp\u003eThe T-bolt design delivers uniform, high-torque clamping around the hose circumference, reducing the chance of leaks when systems are under load. The floating bridge equalizes pressure across the band so load points don’t concentrate and cut into the hose material.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty T-bolt secures even under cyclic vibration\u003c\/li\u003e\n\u003cli\u003eFloating bridge disperses clamping force for better seal life\u003c\/li\u003e\n\u003cli\u003eNylon-insert locknut resists loosening from road or engine vibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these clamps damage silicone or rubber hoses?\u003c\/h3\u003e\n\u003cp\u003eNo—this clamp set is designed with hose-friendly details to avoid slicing or abrasion. The 304 stainless band is rolled smooth and has rounded edges so it grips without sharp contact points, protecting delicate materials like silicone.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRolled 304 stainless band with smooth edges minimizes cutting risk\u003c\/li\u003e\n\u003cli\u003eEven pressure distribution reduces localized stress on hose walls\u003c\/li\u003e\n\u003cli\u003eRecommended for silicone, rubber, and reinforced hoses used in turbo or coolant systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size do I need and how should I measure my hose?\u003c\/h3\u003e\n\u003cp\u003eThese clamps fit hose outer diameters from 1.81\" to 2.05\" (46–52mm). Measure the outside diameter (O.D.) of the hose at the connection point—not the inside diameter—to ensure the clamp will close and tighten correctly around the hose exterior.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorking range: 1.81\"–2.05\" (46–52mm) O.D.\u003c\/li\u003e\n\u003cli\u003eMeasure hose O.D. with calipers or a tape measure for accuracy\u003c\/li\u003e\n\u003cli\u003eDo not use the clamp size by hose I.D.; confirm actual outside diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: slide the clamp over the hose end, position it across the coupling or fitting, then tighten the T-bolt until the desired compression is reached. Only basic hand tools like a socket, nut driver, or wrench are needed for reliable torque control.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple slide-on fit, adjust position, then tighten the 1\/4\"-28 bolt\u003c\/li\u003e\n\u003cli\u003eFits standard hand tools — wrench, socket, or nut driver\u003c\/li\u003e\n\u003cli\u003e2 clamps included so you can secure both hose ends or keep a spare\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Professionals and DIYers who need dependable hose fasteners for automotive, heavy-truck, agricultural, or industrial fluid and air systems. These clamps suit turbo and intake plumbing, intercooler and radiator hoses, coolant lines, and any application that requires corrosion-resistant, uniform clamping over time. Choose ROADFORMER when you want rugged stainless components and a compact size that fits 1.81\"–2.05\" outer-diameter hoses.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these clamps resist rust and corrosion?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The band is 304 stainless steel and the bolt hardware is stainless, offering good corrosion resistance for automotive and outdoor use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I reuse these clamps after removal?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The robust T-bolt and nylon-insert locknut allow reuse, provided the clamp shows no deformation or thread damage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55161959448919,"sku":"B07M8BCFD1","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging-2-pack-clamps.jpg?v=1790334156"},{"product_id":"roadformer-0-75-worm-gear-hose-clamps-17-32mm-10-pack-300-series-stainless-steel-corrosion-resistant","title":"ROADFORMER 0.75\" Worm Gear Hose Clamps 17–32mm (10-Pack) — 300-Series Stainless Steel, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 0.75 inch worm gear hose clamp set secures 17–32mm hoses with full 300-series stainless-steel construction for corrosion-resistant, adjustable fastening.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese ROADFORMER SAE 12 hose clamps come as a 10-piece kit designed for repeatable, reliable hose connections. Each clamp uses an inner worm gear and a slotted hex-head screw to smoothly alter the band diameter, making them suitable for pipe, hose, tubing and cable fastening across automotive, marine and household tasks. The fully stainless-steel build helps resist rust and weathering while providing consistent tightening torque for durable clamping.\u003c\/p\u003e\n\n\u003ch3\u003eHow precise is the adjustment range for different hose sizes?\u003c\/h3\u003e\n\n\u003cp\u003eThe clamps cover a flexible working diameter from 17mm to 32mm (about 0.67\"–1.25\"), letting one clamp fit multiple hose outer diameters. The worm gear mechanism turns smoothly so you can fine-tune tension instead of relying on a one-size-fit-all band.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorking range: 17mm–32mm (0.67\"–1.25\").\u003c\/li\u003e\n  \u003cli\u003eBand width: 0.75 inch (SAE 12, 1\/2\" band width).\u003c\/li\u003e\n  \u003cli\u003eInstallation torque range: 35–45 in·lbs (4.0–5.1 Nm) recommended.\u003c\/li\u003e\n  \u003cli\u003eMaximum torque capability: ~60 in·lbs (6.8 Nm) minimum.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these clamps stand up to saltwater or outdoor use?\u003c\/h3\u003e\n\n\u003cp\u003eYes — every component (band, housing and screw) is made from 300-series stainless steel, which provides strong resistance to corrosion and helps prevent seizing in damp, marine, or outdoor environments. That makes them appropriate for boat bilges, irrigation systems, and exterior plumbing where moisture and weathering are concerns.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFull 300-series stainless-steel construction.\u003c\/li\u003e\n  \u003cli\u003eRust and corrosion resistance for marine and outdoor exposure.\u003c\/li\u003e\n  \u003cli\u003eSmooth worm-gear reduces screw galling and wear.\u003c\/li\u003e\n  \u003cli\u003eDurable for repeated installations and removals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy are they to install and remove during repairs?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation requires only a standard slotted or hex screwdriver or socket that fits the 5\/16\" slotted hex-head screw. The inner worm gear allows incremental tightening so you can achieve a snug, leak-resistant fit without overtightening and damaging the hose.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUse a slotted screwdriver or 5\/16\" hex driver for fast tightening.\u003c\/li\u003e\n  \u003cli\u003eIncremental adjustment for precise clamping pressure.\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeat removal and reinstallation without loss of function.\u003c\/li\u003e\n  \u003cli\u003ePackage of 10 provides spares for maintenance jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat applications and industries are these clamps suitable for?\u003c\/h3\u003e\n\n\u003cp\u003eThese clamps are specified for broad use where secure hose connections matter: automotive cooling and vacuum lines, household plumbing, agricultural equipment, construction machinery and marine fittings. Their SAE 12 sizing and robust material make them a practical go-to fastener for both professional mechanics and homeowners doing repairs or installations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAutomotive hoses, vacuum lines, and cooling system ties.\u003c\/li\u003e\n  \u003cli\u003eMarine hoses, bilge connections and deck fittings.\u003c\/li\u003e\n  \u003cli\u003eGarden irrigation, small pumps and household plumbing.\u003c\/li\u003e\n  \u003cli\u003eAgricultural and construction equipment hose securing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ROADFORMER 0.75\" worm gear clamps are aimed at technicians, DIYers and maintenance teams who need dependable, corrosion-resistant hose fasteners in a compact SAE 12 size. If you want adjustable clamps that resist rust, provide repeatable torque and come in a convenient 10-pack for projects, workshops or fleets, this kit delivers practical, long-lasting performance without specialty tools.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tool do I need to tighten ROADFORMER SAE 12 clamps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A slotted screwdriver or a 5\/16\" hex driver fits the slotted hex-head screw for tightening and loosening.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these clamps suitable for saltwater use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Full 300-series stainless-steel construction resists rust and is suitable for marine and outdoor exposure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55162204815703,"sku":"B086MG4T85","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging-10-pack.jpg?v=1790335253"},{"product_id":"roadformer-3-5in-exhaust-band-clamp-304-stainless-steel-lap-joint-1-pack-no-weld-leak-resistant","title":"ROADFORMER 3.5in Exhaust Band Clamp 304 Stainless Steel Lap-Joint — 1 Pack, No-Weld Leak-Resistant","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 3.5 inch lap-joint exhaust band clamp is a stainless steel, no-weld solution that joins a 3.5\" OD pipe into a 3.5\" ID pipe for leak-resistant exhaust repairs and custom assemblies.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty 3.5\" band clamp by ROADFORMER is made from corrosion-resistant 304 stainless steel and engineered to create an even, 360° seal on overlapping lap-joint connections. It replaces welded joins and U-bolt clamps by distributing clamping force evenly around the pipe circumference, reducing distortion and making future disassembly simple with common hand tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this clamp make exhaust repairs simpler?\u003c\/h3\u003e\n\u003cp\u003eThe lap-joint design lets you slip an outer pipe over an inner pipe and secure them with a wide band for a tight seal without welding. Pre-assembled hardware speeds installation so you can repair or modify an exhaust line with basic tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits a 3.5\" outer diameter pipe into a 3.5\" inner diameter pipe.\u003c\/li\u003e\n  \u003cli\u003eWide band applies uniform pressure to prevent pinching or misalignment.\u003c\/li\u003e\n  \u003cli\u003eInstalls or removes quickly using a socket or ratchet—no torch required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this clamp resist corrosion and vibration in exhaust systems?\u003c\/h3\u003e\n\u003cp\u003eYes. Constructed from 304 stainless steel for both the band and fasteners, this clamp withstands heat, road moisture, and vibration common to automotive and truck exhausts. The material choice helps maintain clamping force and appearance over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e304 stainless resists rust in wet and high-temperature environments.\u003c\/li\u003e\n  \u003cli\u003eHigh-strength fasteners hold torque under vibration.\u003c\/li\u003e\n  \u003cli\u003eWide band design lowers the chance of clamp fatigue and cracking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat applications is the ROADFORMER 3.5\" band clamp suitable for?\u003c\/h3\u003e\n\u003cp\u003eDesigned for universal exhaust use, this clamp works well across repair and performance projects—from mufflers to turbo downpipes. Use it on lap-joint connections for mufflers, catalytic converters, resonators, flex pipes, elbows and custom tubing setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMuffler and tailpipe repairs without cutting or welding.\u003c\/li\u003e\n  \u003cli\u003eTurbo downpipe and performance exhaust joins where a tight seal is crucial.\u003c\/li\u003e\n  \u003cli\u003eTemporary or permanent joins in retrofit and custom-fabrication work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I ensure this clamp fits my pipes correctly?\u003c\/h3\u003e\n\u003cp\u003eMeasure your pipe outer diameter (OD) and inner diameter (ID) before ordering to confirm compatibility with a 3.5\" OD into 3.5\" ID lap-joint. Because the clamp secures overlapping pipes, accurate measurement prevents loose fits or over-compression.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure the outer pipe OD and the receiving pipe ID at the connection point.\u003c\/li\u003e\n  \u003cli\u003eEnsure the outer pipe can slide over the inner pipe for a lap-joint setup.\u003c\/li\u003e\n  \u003cli\u003eUse a torque wrench or calibrated socket to tighten to a snug, even pressure—don’t overtighten.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: ROADFORMER's 3.5\" stainless steel lap-joint band clamp is built for DIY mechanics, professional exhaust shops, truck and performance car owners, and fabricators who need a durable, serviceable clamp that avoids welding. If you install or repair mufflers, catalytic converters, turbo downpipes, flex sections, or custom exhaust systems and want a leak-resistant, rust-tolerant connector that’s quick to fit and simple to remove, this clamp is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this clamp require welding to join exhaust pipes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the ROADFORMER lap-joint band clamp secures overlapping pipes without welding, using pre-assembled fasteners and basic hand tools.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this clamp suitable for high-temperature turbo downpipes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — made from 304 stainless steel, it tolerates the heat and vibration typical of turbo downpipe applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55162699284823,"sku":"B07646WW95","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-view-band-clamp.jpg?v=1790338074"},{"product_id":"roadformer-2-5-t-bolt-hose-clamps-2-pack-2-31-2-64-o-d-304-stainless-nylon-locknut","title":"ROADFORMER 2.5\" T-Bolt Hose Clamps 2-Pack, 2.31\"–2.64\" O.D. — 304 Stainless, Nylon Locknut","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 2.5-inch T-bolt hose clamps are heavy-duty stainless steel clamps designed to secure hoses with outside diameters from 2.31\" to 2.64\" (59–67mm), sold as a two-pack.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese clamps combine a 304 stainless steel band, a 1\/4\"-28 stainless bolt, a floating bridge and a nylon-insert locknut to deliver even, long-lasting compression for turbo, intercooler, radiator, coolant and intake connections. Built to resist corrosion and maintain consistent clamping force under vibration and pressure, they are intended for demanding automotive, truck, industrial and agricultural applications. Before ordering, measure your hose outside diameter (O.D.), not the inner diameter (I.D.), to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps hold up under high vibration and pressure?\u003c\/h3\u003e\n\u003cp\u003eThe T-bolt form gives a wide, uniform clamping surface and the floating bridge evens out pressure across the hose, reducing leak risk in high-stress conditions. The nylon-insert locknut helps resist loosening from repeated vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty 1\/4\"-28 stainless steel bolt for secure torque retention\u003c\/li\u003e\n  \u003cli\u003eFloating bridge spreads load to prevent localized pinching\u003c\/li\u003e\n  \u003cli\u003eNylon-insert locknut resists back-off from vibration\u003c\/li\u003e\n  \u003cli\u003eDesigned for turbo, radiator and coolant hose duty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials are used and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eAll corrosion-prone components are stainless steel to extend life in wet, salty or oily environments. The 304 band combines strength with smooth rounded edges to avoid cutting silicone or rubber hoses during clamping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e304 stainless steel band: corrosion resistant and durable\u003c\/li\u003e\n  \u003cli\u003e1\/4\"-28 stainless bolt: strong, consistent torque capacity\u003c\/li\u003e\n  \u003cli\u003eNylon-insert locknut: vibration resistance and locking action\u003c\/li\u003e\n  \u003cli\u003eRounded band edges: protects hose material from abrasion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these clamps fit my hose and how do I measure?\u003c\/h3\u003e\n\u003cp\u003eMeasure the hose outside diameter (O.D.) with calipers or a flexible tape; these clamps fit O.D. from 2.31\" to 2.64\" (59–67mm). They are sized for hoses labeled approximately 2.5\" O.D.; do not use I.D. values to determine fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible O.D. range: 2.31\"–2.64\" (59–67mm)\u003c\/li\u003e\n  \u003cli\u003eSold as a set of two clamps per package\u003c\/li\u003e\n  \u003cli\u003eNot suitable if hose O.D. falls outside range—measure before ordering\u003c\/li\u003e\n  \u003cli\u003eWorks with rubber, silicone and reinforced hoses commonly used on engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires common hand tools: slide the clamp over the hose, position it over the connection and tighten the bolt to the desired clamp force. Occasional inspection and retorque after initial heat cycles will help maintain a leak-free seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall with a wrench or socket on the 1\/4\"-28 bolt\u003c\/li\u003e\n  \u003cli\u003eCheck and retorque after first heat cycle for optimal seal\u003c\/li\u003e\n  \u003cli\u003eInspect periodically for corrosion or band deformation in severe environments\u003c\/li\u003e\n  \u003cli\u003eTwo clamps included for paired or backup use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? ROADFORMER 2.5\" T-bolt hose clamps suit mechanics, fabricators and DIYers who need reliable, corrosion-resistant clamps for turbo systems, intercoolers, radiator hoses, coolant lines and other pressurized or vibration-prone hose connections. If you require robust clamping with smooth band edges to protect silicone or rubber hoses and your hose outside diameter falls within 2.31\"–2.64\", these two-pack clamps are a practical, long-lasting choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these clamps fit a 2.5\" hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit hoses with an outside diameter of 2.31\"–2.64\" (59–67mm). Measure your hose O.D. to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the clamps corrosion resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The band and bolt are stainless steel (304 band) and include a nylon locknut for durability and vibration resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55163959607639,"sku":"B07M8LZB81","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-2-5-t-bolt-front-view.jpg?v=1790348484"},{"product_id":"roadformer-exhaust-clamp-1-75-in-narrow-band-stainless-steel-2-pack-no-weld-with-pre-attached-hardware","title":"ROADFORMER Exhaust Clamp 1.75 in Narrow-Band Stainless Steel — 2-Pack, No-Weld with Pre-Attached Hardware","description":"\u003cp\u003e\u003cb\u003eROADFORMER 1.75 inch Narrow Band Stainless Steel Exhaust Clamp (2 pack) is a no-weld, slip-fit clamp built to join 1.75\" OD to 1.75\" ID exhaust pipes with an even, damage-minimizing seal.\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese clamps are engineered for common exhaust repairs and custom systems where a secure, serviceable connection is needed without torch work. Constructed from corrosion-resistant stainless steel with a narrow band profile, the clamps deliver a compact fit that tucks neatly under heat shields and inside tight routing spaces. Each kit includes pre-attached hardware and high-strength bolts for repeatable removal and reinstallation during maintenance or upgrades.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this clamp fit 1.75\" slip-fit exhaust connections?\u003c\/h3\u003e\n\u003cp\u003eThe ROADFORMER clamp is sized for slip-fit joints where a 1.75\" outside-diameter (OD) pipe slides into a 1.75\" inside-diameter (ID) pipe. Its narrow band wraps the joint and the reaction block design creates uniform pressure around the circumference to lock the parts together. No welding is necessary, making it a faster option for field repairs or aftermarket builds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for 1.75\" OD into 1.75\" ID slip-fit assemblies\u003c\/li\u003e\n  \u003cli\u003eNarrow stainless band clears nearby components and heat shields\u003c\/li\u003e\n  \u003cli\u003ePre-attached hardware simplifies alignment during installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the clamp damage thin-walled exhaust pipe or crush the tube?\u003c\/h3\u003e\n\u003cp\u003eThe clamp uses a reaction block technology to distribute clamp load evenly so the band compresses without pinching or deforming the pipe edge. That 360° distribution reduces high-pressure points that cause crushing on thin-walled tubing. Still, correct torque and proper joint preparation improve long-term sealing and pipe life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReaction block reduces localized stress and pipe distortion\u003c\/li\u003e\n  \u003cli\u003e10.9 grade bolt supplies strong clamping force while remaining serviceable\u003c\/li\u003e\n  \u003cli\u003eRecommended torque range (40–50 ft‑lbs) for consistent results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and hardware come with the clamp?\u003c\/h3\u003e\n\u003cp\u003eEach clamp is manufactured from stainless steel to resist rust and extend service life in hot, corrosive exhaust environments. Hardware includes a high-strength 10.9 grade bolt and nut, pre-attached to speed installation and removal. The combination of materials and components balances durability with the ability to disassemble the joint when needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel narrow band for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003e10.9 grade bolt for reliable clamping force\u003c\/li\u003e\n  \u003cli\u003eShips as a 2-pack for multiple repairs or dual-muffler applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I get the best seal and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires sliding the clamp over the slip-fit joint, centering the reaction block, and torquing the bolt to the recommended range. For improved sealing, apply a suitable exhaust sealant to the joint before clamping. The pre-attached hardware and narrow profile make installation quicker than welding, and the joint remains serviceable for future maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlide clamp over joint, seat and center the reaction block\u003c\/li\u003e\n  \u003cli\u003eTighten bolt to 40–50 ft‑lbs for optimal seal strength\u003c\/li\u003e\n  \u003cli\u003eOptional exhaust sealant can improve leak resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? If you repair or modify exhaust systems—professional mechanics, restoration hobbyists, or DIY vehicle owners—the ROADFORMER 1.75\" narrow band clamp offers a corrosion-resistant, no-weld solution for slip-fit joints. It's especially helpful where space is limited or when you need a removable connection for future service. Choose this 2-pack when you want consistent clamp performance and the ability to rework exhaust assemblies without cutting or welding.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this clamp on other pipe diameters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This clamp is sized specifically for 1.75\" OD into 1.75\" ID slip-fit joints; other diameters require the matching clamp size.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install the clamp?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools—use a torque wrench or breaker bar and socket to tighten the bolt to the recommended 40–50 ft‑lbs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55164059910487,"sku":"B09TPC954K","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-view-clamp-assembled.jpg?v=1790349514"},{"product_id":"roadformer-2-in-stainless-steel-hose-clamps-40-64mm-10-pack-300-series-slotted-hex","title":"ROADFORMER 2 in Stainless Steel Hose Clamps 40–64mm (10-Pack) — 300-Series, Slotted Hex","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 2-inch hose clamps are full 300-series stainless steel worm-gear clamps sized for 40–64mm hoses, sold as a 10-piece pack for corrosion-resistant, adjustable hose and pipe connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese ROADFORMER clamps combine an all-stainless-steel build with a slotted hex head and inner worm gear to deliver reliable clamping for automotive, marine, agricultural and general-purpose use. Each clamp is made from 300-series stainless steel for the band, housing and screw, giving long service life and strong resistance to rust and water exposure. The 40–64mm range (approximately 1.57\"–2.5\") covers common small- to medium-diameter hoses and tubes, and the pack of ten makes them convenient for projects or maintenance kits.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps fit different hose sizes?\u003c\/h3\u003e\n\u003cp\u003eThe ROADFORMER clamps have a flexible working range from 40mm to 64mm, adjusted by the worm gear screw that moves the band smoothly to the desired diameter. That range suits many coolant, fuel, vacuum and drainage hoses, as well as small ducting and cable bundles. Select a clamp whose maximum\/minimum range covers your hose outer diameter for a secure seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking range: 40mm–64mm (about 1.57\"–2.5\")\u003c\/li\u003e\n  \u003cli\u003eInner worm gear for fine adjustment and even pressure\u003c\/li\u003e\n  \u003cli\u003eUse on hoses, pipes, tubes, lines and bundled cables\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build features ensure durability?\u003c\/h3\u003e\n\u003cp\u003eEvery visible component—the band, housing and screw—is made from 300-series stainless steel, providing strong corrosion resistance in wet or salty environments. The slotted hex head accepts both screwdriver and socket tools for reliable tightening. Together these features reduce the risk of rust, galling and premature failure in outdoor and marine settings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull 300-series stainless steel construction for band, housing and screw\u003c\/li\u003e\n  \u003cli\u003e5\/16\" slotted hex head screw for versatile tool use\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist corrosion, waterproofing and long lifecycle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow tight can you install them and what torque should be used?\u003c\/h3\u003e\n\u003cp\u003eThe clamps offer controlled tightening thanks to the inner worm gear; installation torque is recommended between 35–45 in·lbs (4.0–5.1 Nm) for consistent performance. The clamps can withstand an ultimate torque of at least 60 in·lbs (6.8 Nm), giving a safety margin for demanding applications without over-stressing the hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended installation torque: 35–45 in·lbs (4.0–5.1 Nm)\u003c\/li\u003e\n  \u003cli\u003eMinimum ultimate torque: 60 in·lbs (6.8 Nm)\u003c\/li\u003e\n  \u003cli\u003eEven band pressure reduces risk of hose pinch or leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere are these clamps best used and what comes in the package?\u003c\/h3\u003e\n\u003cp\u003eROADFORMER clamps are suitable for automotive repairs, farm equipment, construction gear, boat plumbing and general household maintenance. The pack contains ten identical clamps so you can replace multiple fittings or keep spares on hand. They are sized for small to medium hose work and perform well in both indoor and outdoor environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApplications: automotive, agricultural, marine, construction, home use\u003c\/li\u003e\n  \u003cli\u003ePack count: 10 pieces per box for projects and spare parts\u003c\/li\u003e\n  \u003cli\u003ePrivate-label ROADFORMER packaging with quality control standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These stainless-steel clamps are intended for mechanics, boat owners, farmers, tradespeople and DIYers who need dependable, corrosion-resistant hose connections in moderate-size diameters. If you require adjustable, reusable clamps that resist rust and deliver predictable tightening torque, this 10-pack covers routine repairs and installation work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these clamps suitable for marine use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — full 300-series stainless steel construction resists saltwater corrosion, making them suitable for many marine fittings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will one clamp fit a 50mm hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 40–64mm range covers a 50mm hose, allowing proper tightening and a secure fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55164225290583,"sku":"B086MPFLNW","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging-10-pack_4b26822c-4612-4075-971e-f586db9daabf.jpg?v=1790351593"},{"product_id":"roadformer-hose-clamps-27-51mm-1-06-2-in-10-pack-full-300-series-stainless-worm-drive","title":"ROADFORMER Hose Clamps 27–51mm (1.06–2 in) 10-Pack — Full 300-Series Stainless, Worm-Drive","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 1.5\" hose clamps are all-stainless steel adjustable worm-drive clamps designed to secure hoses, pipes and cables between 27mm and 51mm (1.06\"–2\") with corrosion resistance and reliable torque.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 300-series stainless steel for the band, housing and 5\/16\" slotted hex screw, this 10-pack of ROADFORMER clamps offers a corrosion-resistant fastening solution for automotive, marine, agricultural and general-purpose use. The inner worm gear lets you smoothly vary the diameter for a snug fit, while tested torque ranges give predictable installation performance. Each set arrives in ROADFORMER branded packaging so you get consistent sizing and quality across all ten pieces.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps adjust to different hose sizes?\u003c\/h3\u003e\n\n\u003cp\u003eThe ROADFORMER clamps use an inner worm-drive mechanism that advances the band when the screw is turned, allowing precise control over the clamp diameter. Their specified working range of 27mm–51mm (approximately 1.06\"–2\") covers a broad spectrum of common hose and pipe outer diameters found in DIY and professional projects.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorking diameter: 27mm–51mm (1.06\"–2\").\u003c\/li\u003e\n  \u003cli\u003eSmooth inner worm gear reduces slippage and ensures even compression.\u003c\/li\u003e\n  \u003cli\u003eScrew head: 5\/16\" slotted hex standard for common tools and sockets.\u003c\/li\u003e\n  \u003cli\u003eGradual tightening for tailored fit without overtightening risk.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and corrosion protection do they provide?\u003c\/h3\u003e\n\n\u003cp\u003eEvery component—the band, housing and screw—is made from 300-series stainless steel to resist rust and extend service life, especially in wet or salty environments. This full-stainless construction is preferable to plated or mixed-metal clamps when exposure to moisture or chemicals is expected.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e300-series stainless steel band, housing and screw for uniform corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eSuitable for outdoor, marine and humid conditions where plated clamps fail.\u003c\/li\u003e\n  \u003cli\u003eDurable finish that resists pitting and discoloration over time.\u003c\/li\u003e\n  \u003cli\u003eConsistent material for even wear and predictable performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat torque and installation guidance should I follow?\u003c\/h3\u003e\n\n\u003cp\u003eROADFORMER recommends an installation torque range of 35–45 in·lbs (4.0–5.1 Nm) for secure sealing without deforming the hose; ultimate torque capacity is at least 60 in·lbs (6.8 Nm). Use a properly sized screwdriver or 5\/16\" hex driver and tighten incrementally while checking for a snug, leak-free fit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInstallation torque: 35–45 in·lbs (4.0–5.1 Nm) for optimal sealing.\u003c\/li\u003e\n  \u003cli\u003eUltimate torque rating: 60 in·lbs (6.8 Nm) minimum before failure modes.\u003c\/li\u003e\n  \u003cli\u003eUse a slotted or hex driver to apply steady, even turns.\u003c\/li\u003e\n  \u003cli\u003eInspect hose OD and fit before final torque to avoid overtightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere can these clamps be used safely and effectively?\u003c\/h3\u003e\n\n\u003cp\u003eThese clamps are versatile for automotive cooling and intake hoses, marine bilge and livewell lines, agricultural irrigation, light construction plumbing and household repairs. Their all-stainless design makes them especially useful in environments where moisture or salt exposure can corrode mixed-metal clamps.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAutomotive engine hoses, coolant lines and vacuum plumbing.\u003c\/li\u003e\n  \u003cli\u003eMarine hose connections and freshwater systems exposed to salt spray.\u003c\/li\u003e\n  \u003cli\u003eIrrigation, greenhouse plumbing and agricultural equipment hoses.\u003c\/li\u003e\n  \u003cli\u003eGeneral household and construction use for securing pipes and cables.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These ROADFORMER 1.5\" stainless-steel hose clamps suit homeowners, mechanics, marine hobbyists, farmers and maintenance professionals who need a dependable, corrosion-resistant clamp for hoses and pipes within the 27mm–51mm range. The 10-piece package is useful for multi-point installations or stocking a workshop, and the full-stainless construction is ideal when long-term exposure to water, humidity or salt is expected. Choose these clamps when you want predictable torque, smooth adjustment and material consistency across every unit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these clamps suitable for marine use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Full 300-series stainless steel construction resists corrosion in marine and wet environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What hose diameters do these clamps fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit hoses with outer diameters from 27mm to 51mm (about 1.06\" to 2\").\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55164500345175,"sku":"B086MDTDNR","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging-10-pack_349b97c7-aed3-4a31-8421-c0a0c3df04c6.jpg?v=1790352854"},{"product_id":"roadformer-stainless-steel-hose-clamps-33-57mm-1-75-10-pack-300-series-corrosion-resistant","title":"ROADFORMER stainless steel hose clamps 33–57mm (1.75\") 10-pack — 300-series, corrosion-resistant","description":"\u003cstrong\u003eROADFORMER 1.75 inch full stainless-steel hose clamps are corrosion-resistant adjustable worm-drive clamps sized for 33–57mm hoses, sold as a 10-piece set for reliable fastening.\u003c\/strong\u003e\n\n\u003cp\u003eThese ROADFORMER hose clamps are built from 300-series stainless steel throughout—the band, housing and 5\/16\" slotted hex-head screw—so they resist rust and hold up in wet, outdoor, and marine environments. With a flexible diameter range equivalent to 1.3\"–2.25\" (33mm–57mm), they fit many common hose, tube and pipe applications. The inner worm gear offers smooth, precise adjustments and repeatable torque to secure connections without crushing the hose.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps perform in corrosive or outdoor environments?\u003c\/h3\u003e\n\u003cp\u003eThe all-300-series stainless construction minimizes oxidation and surface degradation where moisture, salt or chemicals are present. That makes them a practical choice for marine, agricultural and outdoor equipment where regular exposure would shorten the life of lower-grade clamps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: 300-series stainless steel band, housing and screw for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eSuitable for marine and outdoor use where rust prevention is important\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeated use without fastened threads seizing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and torque can I expect from the 1.75\" clamps?\u003c\/h3\u003e\n\u003cp\u003eEach clamp adjusts from 33mm to 57mm (about 1.3\"–2.25\") to cover a range of hose outer diameters. The clamps are engineered to reach an ultimate torque around 60 in·lbs minimum and recommend an installation torque between 35–45 in·lbs for secure, damage-free fastening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking range: 33mm–57mm (1.3\"–2.25\") to fit many hose ODs\u003c\/li\u003e\n  \u003cli\u003eInstallation torque: 35–45 in·lbs (4.0–5.1 Nm) for proper sealing\u003c\/li\u003e\n  \u003cli\u003eUltimate torque: approximately 60 in·lbs minimum for maximum holding power\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy are these clamps to install and adjust?\u003c\/h3\u003e\n\u003cp\u003eThe worm-drive design with an inner gear enables fine, smooth diameter changes and a precise fit on the hose. The 5\/16\" slotted hex-head screw works with standard screwdrivers or sockets, making installation straightforward for DIYers and pros alike.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner worm gear for smooth, incremental tightening\u003c\/li\u003e\n  \u003cli\u003eCompatible with common hand tools and drivers for quick installs\u003c\/li\u003e\n  \u003cli\u003eAdjustable to avoid over-compressing flexible hoses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere can I use these clamps around the home and workplace?\u003c\/h3\u003e\n\u003cp\u003eROADFORMER clamps are versatile across industries: they secure hoses, lines, and small-diameter tubing in vehicles, farm equipment, HVAC, plumbing, and many outdoor systems. Their stainless build also makes them suitable for boats and coastal installations where salt spray is a concern.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomotive and engine bay hose connections\u003c\/li\u003e\n  \u003cli\u003eAgricultural and construction equipment hoses and lines\u003c\/li\u003e\n  \u003cli\u003eMarine, plumbing, HVAC and general-purpose household uses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: If you need a dependable, corrosion-resistant clamp for 33–57mm hoses—whether you’re a mechanic, boater, farmer, contractor or a homeowner doing maintenance—this 10-pack from ROADFORMER supplies spare clamps for repairs, projects and routine replacements. The combination of full stainless construction, a reliable worm-drive mechanism and a practical size range makes these clamps a solid choice for applications that demand longevity and easy re-tightening.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these clamps safe for marine use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Made from 300-series stainless steel, they resist rust and are suitable for marine and salt-exposed environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these clamps fit a 1.75\" hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They cover 33–57mm (about 1.3\"–2.25\"), so confirm your hose outer diameter falls within that range before using.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55164502114647,"sku":"B086MBKF2S","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-package-10-pack.jpg?v=1790352875"},{"product_id":"roadformer-1-25-inch-hose-clamps-full-stainless-steel-21-44mm-range-10-pack-corrosion-resistant","title":"ROADFORMER 1.25-inch Hose Clamps, Full Stainless Steel, 21–44mm Range — 10-Pack, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 1.25-inch full stainless steel worm-gear hose clamps secure hoses, tubes and cables with a corrosion-resistant, adjustable band that fits 21–44mm diameters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese clamps are built from 300-series stainless steel for band, housing and screw, offering weatherproof resistance and long service life for automotive, marine, agricultural and household uses. Each pack contains ten individually finished clamps sized to work across a broad range of hose outside diameters (21mm to 44mm \/ 0.83\" to 1.73\"). The inner worm-gear design delivers smooth, fine adjustment so you can set clamping pressure precisely while installation torque and ultimate torque ranges guide safe tightening.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps fit different hose sizes?\u003c\/h3\u003e\n\u003cp\u003eThe ROADFORMER 1.25\" clamps accommodate hoses and pipes from 21mm to 44mm OD using a continuous band and internal worm gear. Turning the slotted hex head screw reduces or increases the loop diameter for a snug fit across the clamp’s range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlexible working range: 21–44mm (0.83\"–1.73\").\u003c\/li\u003e\n  \u003cli\u003eFine incremental adjustment via internal worm gear.\u003c\/li\u003e\n  \u003cli\u003eChoose clamp when hose OD falls inside the specified range.\u003c\/li\u003e\n  \u003cli\u003eTen clamps per pack for multiple repairs or projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these clamps durable and corrosion-resistant?\u003c\/h3\u003e\n\u003cp\u003eYes — band, housing and screw are manufactured from 300-series stainless steel to resist rust in wet, salty, or damp environments. That stainless construction reduces maintenance and extends useful life compared with plated or zinc-coated clamps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAll-stainless components for improved longevity.\u003c\/li\u003e\n  \u003cli\u003eSuitable for outdoor and marine exposures.\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand repeated installation cycles.\u003c\/li\u003e\n  \u003cli\u003eNo plated surfaces that flake under stress.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much torque should I apply when installing?\u003c\/h3\u003e\n\u003cp\u003eThe clamps are designed for controlled tightening: installation torque is recommended between 35–45 in·lbs (4.0–5.1 Nm), with an ultimate torque rating around 60 in·lbs (≈6.8 Nm). Using a torque driver or a calibrated screwdriver helps prevent over-tightening that could damage hoses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstallation torque: 35–45 in·lbs (4.0–5.1 Nm).\u003c\/li\u003e\n  \u003cli\u003eUltimate torque: ~60 in·lbs (6.8 Nm) minimum.\u003c\/li\u003e\n  \u003cli\u003eUse proper tools to avoid deforming the hose or clamp band.\u003c\/li\u003e\n  \u003cli\u003eInspect after first heat cycle or pressure test for reassessment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere are these clamps best applied?\u003c\/h3\u003e\n\u003cp\u003eTheir size and stainless construction make them versatile for automotive cooling and fuel lines, marine bilge and plumbing systems, agricultural equipment, HVAC ducts and general household repairs. They are a practical choice when corrosion resistance and a reliable seal are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomotive hoses, coolant and ventilation ducts.\u003c\/li\u003e\n  \u003cli\u003eMarine plumbing and bilge applications.\u003c\/li\u003e\n  \u003cli\u003eAgricultural machinery hoses and irrigation lines.\u003c\/li\u003e\n  \u003cli\u003eHome plumbing, workshop and DIY projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These ROADFORMER clamps suit mechanics, boat owners, farmers, HVAC technicians and DIYers who need a dependable, corrosion-resistant clamp in a compact size range. The 10-pack format gives tradespeople spare parts on hand, while hobbyists get multiple clamps for repairs and projects. If you require a small-diameter stainless clamp with precise adjustment and proven material quality, this set covers common hose diameters and delivers repeatable performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What hose diameters do these clamps fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit hose outside diameters from 21mm to 44mm (0.83\"–1.73\").\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these clamps corrosion-resistant for marine use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. All components use 300-series stainless steel suitable for marine environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55164502180183,"sku":"B086MV9FNB","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging-hose-clamps.jpg?v=1790352877"},{"product_id":"roadformer-2-narrow-band-exhaust-clamp-2-pack-stainless-steel-10-9-bolt-compact-fit","title":"ROADFORMER 2\" Narrow Band Exhaust Clamp 2-Pack — Stainless Steel, 10.9 Bolt, Compact Fit","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 2-inch Narrow Band Exhaust Clamp (2-pack) is a stainless-steel, no-weld clamp designed to join 2\" OD pipe into 2\" ID pipe for reliable, serviceable exhaust connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pair of ROADFORMER narrow band clamps offers a compact, corrosion-resistant solution for muffler inlets\/outlets, elbows, catalytic converter joins, and other 2\" slip-fit exhaust repairs. Built from stainless steel with a high-strength 10.9 grade bolt and a reaction block to distribute force, these clamps provide a tight mechanical seal without the immediate need for welding. They’re intended for quick installations, routine maintenance, and custom exhaust work where a serviceable connection is preferred.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this clamp create a secure seal without welding?\u003c\/h3\u003e\n\n\u003cp\u003eThe clamp uses ROADFORMER Reaction Block Technology to spread clamping force evenly around the pipe circumference, which reduces localized crushing and helps form a consistent mechanical seal. A narrow band concentrates force in a streamlined area for compact fitment while the 10.9 grade bolt supplies the necessary torque for a durable joint. For best sealing performance, an exhaust sealant can be added to the joint before tightening.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e360° force distribution via reaction block lowers pipe distortion risk\u003c\/li\u003e\n  \u003cli\u003eHigh-tensile 10.9 grade bolt supports recommended 40–50 ft‑lbs torque\u003c\/li\u003e\n  \u003cli\u003eNarrow band profile fits tight spaces and muffler inlets\/outlets\u003c\/li\u003e\n  \u003cli\u003eOptional exhaust sealant improves gas-tightness where needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these clamps fit my exhaust components?\u003c\/h3\u003e\n\n\u003cp\u003eThese clamps are engineered specifically for slip-fit connections where a 2\" OD pipe inserts into a 2\" ID pipe. They work well on muffler spigots, straight pipe ends, elbows, and many catalytic converter interfaces provided the pipe diameters match the 2\" specification. Always verify actual pipe outside diameter and inside diameter before purchasing to ensure a correct fit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned for 2\" OD into 2\" ID slip-fit applications\u003c\/li\u003e\n  \u003cli\u003eSuitable for pipes, muffler inlets\/outlets, and elbows with matching sizes\u003c\/li\u003e\n  \u003cli\u003ePre-attached hardware simplifies alignment during installation\u003c\/li\u003e\n  \u003cli\u003eNot intended for oversized or undersized pipe without adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant are these clamps?\u003c\/h3\u003e\n\n\u003cp\u003eConstructed from stainless steel, ROADFORMER narrow band clamps resist rust and maintain strength under typical road and exhaust heat cycles. The narrow band reduces exposed surface area while retaining sealing capability, and the 10.9 grade bolt provides long-term clamping power. This construction makes the clamps suitable for repair and replacement work in corrosive or high-temperature environments common to exhaust systems.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStainless-steel band for corrosion resistance and longevity\u003c\/li\u003e\n  \u003cli\u003e10.9 grade bolt engineered for sustained clamping force\u003c\/li\u003e\n  \u003cli\u003eNarrow-band design reduces bulk and exposure to road elements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and future servicing?\u003c\/h3\u003e\n\n\u003cp\u003eROADFORMER clamps come with pre-attached hardware so they can be positioned and tightened without welding. Installation is straightforward with standard hand tools; recommended torque is 40–50 ft‑lbs for a secure, serviceable joint. Because the clamp is removable, it’s useful for temporary fixes, diagnostic access, or components that may require periodic disassembly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNo-weld installation using common sockets or wrenches\u003c\/li\u003e\n  \u003cli\u003ePre-attached hardware reduces installation time and errors\u003c\/li\u003e\n  \u003cli\u003eRemovable design enables future maintenance or replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The ROADFORMER 2\" Narrow Band Exhaust Clamp (2-pack) is made for mechanics, DIYers, and custom exhaust builders who need a compact, corrosion-resistant clamp for 2\" slip-fit connections. Choose this product when you want a mechanical, serviceable joint for mufflers, straight pipes, elbows, or converter interfaces where welding is impractical or you prefer a removable solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this clamp work on a 2\" OD into 2\" ID muffler joint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s designed specifically for 2\" OD pipe inserted into 2\" ID pipe for muffler and exhaust slip-fit joints.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to weld after installing these clamps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. They provide a mechanical, removable seal without welding, though welds can be added if a permanent joint is required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55164557459799,"sku":"B09TPBC4ZB","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-clamp-front-packaging.jpg?v=1790353706"},{"product_id":"roadformer-2-5-exhaust-lap-joint-band-clamps-2-pack-304-stainless-12-9-grade-fasteners","title":"ROADFORMER 2.5\" Exhaust Lap-Joint Band Clamps 2-Pack — 304 Stainless, 12.9-Grade Fasteners","description":"\u003cb\u003eROADFORMER 2.5 inch lap-joint exhaust band clamps are stainless steel, full-wrap clamps designed to seal overlapping 2.5\" exhaust pipes and muffler connections with durable, corrosion-resistant hardware.\u003c\/b\u003e\n\nThese two clamps are built to join a 2.5\" outside-diameter pipe into a 2.5\" inside-diameter component—common when connecting muffler insets, outlets, elbows, flex sections, and other exhaust parts. Constructed from 304 stainless steel and fitted with high-strength 12.9-grade fasteners, the clamps deliver consistent compressive force around the entire circumference while minimizing distortion and exhaust leaks.\n\n\u003ch3\u003eHow do these clamps create a reliable seal on exhaust joints?\u003c\/h3\u003e\n\u003cp\u003eThe ROADFORMER lap joint design offers a 360-degree band that compresses evenly around overlapping pipe ends for a uniform seal. A reaction block protects the pipe ends during tightening, reducing deformation and preserving the mating surfaces for a tighter fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-wrap band provides continuous clamping pressure around the pipe.\u003c\/li\u003e\n  \u003cli\u003eReaction block prevents clamp heads from cutting into pipe ends during torque.\u003c\/li\u003e\n  \u003cli\u003e12.9-grade bolts give higher, consistent clamp load for sealing.\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for 2.5\" OD into 2.5\" ID pipe assemblies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these clamps resist rust and road corrosion?\u003c\/h3\u003e\n\u003cp\u003eThe band and components use 304 stainless steel, which offers strong corrosion resistance for automotive and light commercial use. ROADFORMER also applies a protective film to the band surface; removing it before installation ensures a clean metal-to-metal connection while the base material helps withstand salt and moisture exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e304 stainless band resists oxidation and rust in wet environments.\u003c\/li\u003e\n  \u003cli\u003eBand tested in salt spray conditions for extended corrosion performance.\u003c\/li\u003e\n  \u003cli\u003eProtective film guards finish during shipping—peel prior to fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow quickly can I install these lap joint band clamps?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and designed to be fast and repeatable: slide the band over the overlapping joint, align the reaction block, then tighten the high-strength fastener to the required torque. The clamp’s geometry helps minimize installation corrections and reduces the chance of gas leaks from uneven tightening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlide-over band style fits over preassembled pipe overlap for fast placement.\u003c\/li\u003e\n  \u003cli\u003eHigh-strength bolt and nut allow predictable torqueing and re-tightening.\u003c\/li\u003e\n  \u003cli\u003eReduces installation time compared with welding or custom flanges.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components and quality features are included in the 2-pack?\u003c\/h3\u003e\n\u003cp\u003eEach pack contains two identical ROADFORMER lap-joint band clamps sized for 2.5\" exhaust connections. The clamps include the stainless band, reaction block, and grade-12.9 fasteners engineered to apply effective sealing force without crushing the tubing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo 2.5\" lap joint band clamps per package.\u003c\/li\u003e\n  \u003cli\u003e12.9-grade bolts for strong, consistent clamping pressure.\u003c\/li\u003e\n  \u003cli\u003eReaction block technology to protect pipe ends from damage.\u003c\/li\u003e\n  \u003cli\u003eStainless steel construction for durability and longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for: These ROADFORMER clamps suit mechanics, DIY enthusiasts, and fleet maintenance crews who need a reliable, non-welded method to join 2.5\" exhaust components. They work well on cars, light trucks, commercial vehicles, and aftermarket exhaust repairs where a durable, corrosion-resistant clamp speeds installation and improves sealing without altering pipe geometry.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these clamps join 2.5\" OD into 2.5\" ID exhaust pipes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are designed specifically for overlapping 2.5\" outside-diameter into 2.5\" inside-diameter pipe connections.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Should I remove the protective film before installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Peel off the protective film before fitting to ensure proper metal contact and sealing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55164588622167,"sku":"B091DMPKPM","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging-2pack.jpg?v=1790353872"},{"product_id":"roadformer-2-t-bolt-hose-clamp-55-63mm-2-pack-304-stainless-wide-band-for-turbo-radiator-hoses","title":"ROADFORMER 2\" T-Bolt Hose Clamp 55–63mm (2-Pack) — 304 Stainless, Wide Band for Turbo \u0026 Radiator Hoses","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 2-inch T-bolt hose clamp (55–63mm) is a heavy-duty 304 stainless steel clamp sold in a 2-pack, engineered for strong, even sealing on 2\" nominal I.D. hoses used in automotive, marine, industrial and agricultural systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt to resist corrosion and protect hose material, these clamps pair a 3\/4\" wide stainless band with a 1\/4\"-28 stainless T-bolt, a floating bridge and a nylon-insert locknut for repeatable clamping force. Designed to fit hoses with an outer diameter between 55mm and 63mm (approximately 2.16\"–2.48\"), they replace generic clamps when you need a firmer, more uniform seal on intercooler, radiator, coolant, turbo and intake hoses.\u003c\/p\u003e\n\n\u003ch3\u003eWill these clamps fit my 2-inch hose?\u003c\/h3\u003e\n\u003cp\u003eMeasure the hose outer diameter (O.D.) before choosing these clamps. The ROADFORMER clamps are sized for hoses with an O.D. from 55mm to 63mm, which corresponds to a 2\" nominal inner diameter hose with typical wall thicknesses in SAE standard ranges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking range: 55–63mm (2.16\"–2.48\" O.D.).\u003c\/li\u003e\n  \u003cli\u003eDesigned for ~3mm–6mm hose wall thickness common to silicone and reinforced rubber hoses.\u003c\/li\u003e\n  \u003cli\u003eAlways measure O.D. at the thickest section or over fittings to verify fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the construction improve sealing and hose protection?\u003c\/h3\u003e\n\u003cp\u003eThe clamp uses a 3\/4\" wide 304 stainless steel band with smoothed, rounded edges to lower the risk of cutting or deforming hose material. The heavy T-bolt and floating bridge spread pressure evenly around the connection, while the nylon-insert locknut helps maintain consistent torque under vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e304 stainless resists corrosion for long service life in harsh environments.\u003c\/li\u003e\n  \u003cli\u003eRounded band edges protect silicone and rubber from abrasion and cutting.\u003c\/li\u003e\n  \u003cli\u003eFloating bridge distributes clamping force for reliable sealing across the hose bead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich applications are these clamps best suited for?\u003c\/h3\u003e\n\u003cp\u003eThese T-bolt clamps excel where even, heavy-duty clamping is required: turbo and intake systems, intercoolers, coolant and radiator hoses, and other pressurized or vibration-prone hose joints. They are a common choice for automotive performance, marine engines, agricultural equipment and industrial machinery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurbo, intercooler and intake hose connections needing high clamp force.\u003c\/li\u003e\n  \u003cli\u003eCoolant and radiator hoses where corrosion resistance is important.\u003c\/li\u003e\n  \u003cli\u003eOff-road, marine or agricultural gear exposed to moisture and vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: slide the clamp over the hose, position it over the connection or hose bead, then tighten the T-bolt to the required torque with a wrench. Periodic inspection and retightening as part of scheduled maintenance keeps connections reliable, especially after heat cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall with common hand tools or a wrench; no special tools required.\u003c\/li\u003e\n  \u003cli\u003eCheck torque after initial heat cycles and during routine service intervals.\u003c\/li\u003e\n  \u003cli\u003eReplace if band, bolt, or nut show signs of wear, corrosion, or deformation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: If you work on performance cars, marine engines, agricultural machinery or industrial systems and need durable, corrosion-resistant clamps that protect hose material while delivering uniform clamping force, the ROADFORMER 2\" T-bolt hose clamps (55–63mm) in this 2-pack are a practical, long-lasting option. They suit professionals and DIYers who measure fittings before purchase, expect repeatable sealing under vibration and heat, and prefer stainless hardware for extended service life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What hose size does this clamp fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits hose O.D. 55–63mm (2.16\"–2.48\"), typical for 2\" nominal I.D. hoses with ~3–6mm wall thickness.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material are the clamps made of?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Made from 304 stainless steel with a 1\/4\"-28 stainless T-bolt and nylon-insert locknut.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55165630775639,"sku":"B0F4KDJKY5","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging_a0d58df0-d941-4e36-a087-f23e9125af8d.jpg?v=1790356688"},{"product_id":"roadformer-t-bolt-hose-clamp-2-25-o-d-52-60mm-2-pack-304-stainless-nylon-locknut","title":"ROADFORMER T-Bolt Hose Clamp 2.25\" O.D. (52–60mm) 2-Pack — 304 Stainless, Nylon Locknut","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 2.25\" T-Bolt Hose Clamp (working range 2.06\"–2.36\" \/ 52–60mm) is a heavy-duty, 304 stainless steel two-piece set engineered for secure, even sealing on turbo, intercooler, radiator and coolant hoses.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese ROADFORMER T-bolt clamps are built for applications that demand consistent clamping force under vibration and pressure. Each clamp combines a 1\/4\"-28 stainless steel bolt, a 3\/4\" floating bridge band in 304 stainless steel, and a nylon-insert locknut to resist loosening. The 52–60mm working range corresponds to hose outside diameters — measure your hose O.D. before ordering to ensure a proper fit. The pair of clamps in this package is ideal for engine bays, heavy trucks, industrial equipment, off-road rigs and agricultural machinery.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this T-bolt clamp perform on high-vibration engine connections?\u003c\/h3\u003e\n\u003cp\u003eThe clamp uses a T-bolt design and a nylon-insert locknut to hold torque under vibration, preventing gradual loosening. The floating bridge distributes pressure evenly so the clamp maintains a reliable seal even on high-stress hoses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/4\"-28 stainless steel bolt resists stripping\u003c\/li\u003e\n  \u003cli\u003eFloating bridge spreads clamping load for consistent seal\u003c\/li\u003e\n  \u003cli\u003eNylon locknut helps prevent self-loosening from vibration\u003c\/li\u003e\n  \u003cli\u003eRounded band edges protect silicone and rubber hose surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these clamps resist rust and corrosion in harsh environments?\u003c\/h3\u003e\n\u003cp\u003eYes — critical components are made from 304 stainless steel to provide strong corrosion resistance in wet, salty or oily conditions. That construction helps extend clamp life and keeps clamping force reliable over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e304 stainless steel band and bridge for oxidation resistance\u003c\/li\u003e\n  \u003cli\u003eStainless steel bolt for long-term strength\u003c\/li\u003e\n  \u003cli\u003eNylon insert prevents metal-on-metal back-off\u003c\/li\u003e\n  \u003cli\u003eSuitable for outdoor and engine-bay exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hoses and systems are these 52–60mm clamps best suited for?\u003c\/h3\u003e\n\u003cp\u003eDesigned for hoses with a 2.06\"–2.36\" outside diameter, these clamps are commonly used on turbocharger pipes, intercooler connections, radiator and coolant lines, and intake plumbing. They pair well with silicone and rubber hoses where a smooth band edge is important.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurbo and intercooler silicone couplers\u003c\/li\u003e\n  \u003cli\u003eRadiator and coolant hoses with 2.25\" O.D.\u003c\/li\u003e\n  \u003cli\u003eHeavy-truck and off-road equipment hose junctions\u003c\/li\u003e\n  \u003cli\u003eIndustrial machinery requiring durable clamping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: slide the clamp over the hose, position the clamp over the joint, and tighten the T-bolt with common hand tools until the desired seal is achieved. The design reduces chance of hose pinching and simplifies alignment during fitting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlide clamp over hose O.D. then align over fitting\u003c\/li\u003e\n  \u003cli\u003eTighten T-bolt with a wrench or socket (compatible with 1\/4\"-28 fastener size)\u003c\/li\u003e\n  \u003cli\u003eDo not overtighten — torque evenly for best seal\u003c\/li\u003e\n  \u003cli\u003ePackage contains two identical clamps for paired connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ROADFORMER 2.25\" T-bolt clamps are aimed at mechanics, tuners, fleet operators, farmers and DIY enthusiasts who need a durable, corrosion-resistant clamp for high-pressure or vibration-prone hose joints. If you work on turbocharged vehicles, heavy equipment, or any system where a consistent clamp force and long-term reliability matter, these clamps offer a practical, professional-grade solution in a convenient two-pack.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What hose diameter does this clamp fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits hose outside diameters from 2.06\" to 2.36\" (52–60mm). Measure O.D., not I.D.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these clamps corrosion resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the band and bridge use 304 stainless steel and the bolt is stainless, resisting rust.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55165634675031,"sku":"B07M8VBS57","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-view-clamp.jpg?v=1790356729"},{"product_id":"roadformer-3-t-bolt-hose-clamp-2-pack-304-stainless-2-81-3-11-o-d-nylon-locknut","title":"ROADFORMER 3\" T-Bolt Hose Clamp 2-Pack — 304 Stainless, 2.81\"–3.11\" O.D., Nylon Locknut","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 3 inch T-bolt hose clamp (2 pack) secures hoses with a corrosion-resistant 304 stainless band and a heavy-duty T-bolt for reliable seals on 2.81\"–3.11\" outside diameter hoses.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two ROADFORMER T-bolt clamps are built for demanding connections where vibration, pressure, and long-term durability matter. Constructed from 304 stainless steel with a nylon-insert locknut and a floating bridge design, they provide even compression and protect rubber and silicone hose walls from cuts. The working range is specified for hose outside diameter (O.D.), so confirm your hose O.D. before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps deliver a secure seal on turbo, intercooler, and coolant hoses?\u003c\/h3\u003e\n\u003cp\u003eThe heavy-duty T-bolt design applies uniform clamping force around the hose circumference, reducing the chance of leaks under pressure or torque. The floating bridge spreads the compression evenly, preventing localized pinching and preserving hose integrity. Smooth, rounded band edges minimize abrasion on silicone or rubber materials.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEven pressure from the T-bolt and bridge for consistent sealing\u003c\/li\u003e\n  \u003cli\u003e304 stainless band resists corrosion in automotive environments\u003c\/li\u003e\n  \u003cli\u003eRounded edges protect hose material from cuts\u003c\/li\u003e\n  \u003cli\u003eNylon-insert locknut resists loosening under vibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size hoses will these clamps fit and how should I measure?\u003c\/h3\u003e\n\u003cp\u003eEach clamp fits hoses with an outside diameter between 2.81\" and 3.11\" (approximately 71–79 mm). Measure the hose O.D. rather than the inside diameter to ensure the clamp will close correctly. If your hose falls near the upper or lower limit, measure with the hose pressurized or with couplers installed for an accurate fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking range: 2.81\"–3.11\" O.D. (71–79 mm)\u003c\/li\u003e\n  \u003cli\u003eMeasure hose outside diameter for compatibility\u003c\/li\u003e\n  \u003cli\u003eCheck measurements while hose is mated to fittings for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: slide the clamp over the hose, position it over the coupling or barb, then tighten the bolt until the desired compression is achieved. Standard hand tools like a 1\/4\" drive socket or wrench are all that's needed. The floating bridge helps keep the band centered while you tighten for a faster, cleaner installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlide over hose, position over joint, tighten bolt with wrench or socket\u003c\/li\u003e\n  \u003cli\u003eCommon tools: wrench, ratchet, or nut driver\u003c\/li\u003e\n  \u003cli\u003eFloating bridge aids alignment during tightening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere are these clamps best applied and what environments do they withstand?\u003c\/h3\u003e\n\u003cp\u003eROADFORMER T-bolt clamps are intended for heavy-duty automotive and industrial uses where vibration and pressure are present. They are commonly used on turbocharger plumbing, intercooler piping, radiator and coolant hoses, heavy trucks, off-road machines, and agricultural equipment. The 304 stainless steel construction offers good corrosion resistance in most service environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical uses: turbo, intake, intercooler, radiator, coolant hoses\u003c\/li\u003e\n  \u003cli\u003eDesigned for high vibration and high-pressure situations\u003c\/li\u003e\n  \u003cli\u003e304 stainless resists corrosion in road and engine bay conditions\u003c\/li\u003e\n  \u003cli\u003eWidely used across automotive, industrial, off-road, and agricultural sectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These ROADFORMER T-bolt hose clamps suit mechanics, performance enthusiasts, fleet technicians, and equipment operators who need dependable, long-lasting coupler clamps for hoses with a 2.81\"–3.11\" outside diameter. If you install or maintain turbo, intercooler, radiator, or coolant systems and require even clamping force with corrosion resistance, this two-pack provides practical, ready-to-install hardware.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these clamps fit a 3 inch hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit hoses with an outside diameter of 2.81\"–3.11\" (71–79 mm); measure your hose O.D. to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the clamps corrosion resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the band is 304 stainless steel and includes a nylon-insert locknut for long-term durability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55165634707799,"sku":"B07M8BD4YS","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging-3-inch-tbolt.jpg?v=1790356729"},{"product_id":"roadformer-stainless-steel-hose-clamps-46-70mm-2-25-10-pack-full-300-series-worm-drive","title":"ROADFORMER stainless steel hose clamps 46–70mm (2.25\") 10-pack — full 300-series, worm-drive","description":"\u003cb\u003eROADFORMER 2.25 inch hose clamps are fully stainless-steel worm-drive clamps sized for 46–70mm hoses, sold in a 10-piece pack for reliable, corrosion-resistant fastening.\u003c\/b\u003e\n\n\u003cp\u003eThese clamps are made entirely from 300-series stainless steel — band, housing and 5\/16\" slotted hex-head screw — to resist rust and stand up to wet or outdoor environments. The adjustable range covers hose outer diameters from 46mm to 70mm (approximately 1.81\"–2.75\") and the inner worm-gear design provides smooth, precise tightening. Supplied as a set of ten, they’re intended for automotive, marine, agricultural and general-purpose installations where durable, reusable hose security is required.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps handle corrosion and wet environments?\u003c\/h3\u003e\n\u003cp\u003eThe full 300-series stainless-steel construction reduces oxidation compared with plated or mixed-metal clamps, extending usable life in damp, coastal or marine settings. No painted finishes or mixed metals mean fewer galvanic issues and less flaking or surface breakdown over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e300-series stainless steel for band, housing and screw\u003c\/li\u003e\n  \u003cli\u003eSolid metal construction avoids plated-coating failures\u003c\/li\u003e\n  \u003cli\u003eSuitable for marine and outdoor exposure where moisture is present\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and torque performance should I expect?\u003c\/h3\u003e\n\u003cp\u003eEach clamp is labeled as 2.25\" (nominal) with a working diameter that adjusts from 46mm to 70mm. The design delivers reliable clamping strength: ultimate torque is approximately 60 in·lbs minimum and recommended installation torque sits between 35–45 in·lbs for consistent sealing without damaging hoses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable range: 46mm–70mm (≈1.81\"–2.75\")\u003c\/li\u003e\n  \u003cli\u003eUltimate torque ≈ 60 in·lbs (min)\u003c\/li\u003e\n  \u003cli\u003eInstallation torque recommendation: 35–45 in·lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy are they to install and reuse?\u003c\/h3\u003e\n\u003cp\u003eThe worm-drive mechanism and slotted hex-head screw let you tighten or loosen the clamp with common tools (screwdriver or 5\/16\" socket). Smooth inner-thread engagement helps you achieve an even, precise fit and the metal construction supports multiple removal and reinstallation cycles without weakening the band.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUses standard screwdriver or 5\/16\" hex socket\u003c\/li\u003e\n  \u003cli\u003eInner worm gear for controlled diameter adjustment\u003c\/li\u003e\n  \u003cli\u003eDurable for repeated installs and removals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere are these clamps typically used?\u003c\/h3\u003e\n\u003cp\u003eThey’re designed for versatile use across automotive, agricultural, construction and household projects, and are also suited for marine hoses and outdoor piping. Use them to fasten coolant hoses, fuel lines (where stainless clips are acceptable), garden and irrigation tubing, ductwork or any application requiring a secure, corrosion-resistant clamp.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomotive hoses and engine bay lines\u003c\/li\u003e\n  \u003cli\u003eMarine and boating hose connections\u003c\/li\u003e\n  \u003cli\u003eIrrigation, HVAC, plumbing and general repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ROADFORMER 2.25\" stainless hose clamps are aimed at mechanics, boat owners, contractors, farmers and DIYers who need a robust, corrosion-resistant fastening solution in small-bore hose sizes. If you want reliable, reusable clamps sold in a multi-pack for multiple projects or spares, this 10-piece stainless set provides consistent performance and practical value without specialty tools or fittings.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What hose diameter does this clamp fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits hoses with outer diameters from 46mm to 70mm (about 1.81\"–2.75\").\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these clamps fully stainless steel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — band, housing and 5\/16\" slotted hex screw are all 300-series stainless steel.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55166402134359,"sku":"B086MG3W2X","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging_5bb0c632-459f-420a-a4a8-7b97a43c1319.jpg?v=1790368014"},{"product_id":"roadformer-4-inch-stainless-steel-hose-clamps-90-114mm-10-pack-300-series-corrosion-resistant-worm-gear","title":"ROADFORMER 4-inch Stainless Steel Hose Clamps 90–114mm, 10-Pack — 300-Series Corrosion-Resistant Worm-Gear","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 4-inch hose clamps are full 300-series stainless-steel worm-gear clamps sized to secure hoses and tubing from 90mm to 114mm (3.54\"–4.5\"), supplied in a 10-piece set for durable, corrosion-resistant fastening.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese ROADFORMER clamps combine an all-stainless construction with a slotted hex screw and inner worm gear to give reliable clamping force where corrosion resistance and repeatable tightening matter. Each clamp is sized to cover a common range of hose outer diameters and is built for general-purpose, automotive, marine, agricultural, and household applications where a secure seal and long service life are needed.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps hold hoses securely?\u003c\/h3\u003e\n\u003cp\u003eThe clamps tighten by turning a 5\/16\" slotted hex head that engages an internal worm gear, drawing the band around the hose to create an even compressive seal. The design prevents slippage and allows incremental adjustment so you can dial in the right tightness without over-compressing the hose.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner worm gear for smooth, precise diameter changes\u003c\/li\u003e\n  \u003cli\u003eInstallation torque target: 35–45 in·lbs for proper seating\u003c\/li\u003e\n  \u003cli\u003eUltimate torque capacity ~60 in·lbs to resist loosening under load\u003c\/li\u003e\n  \u003cli\u003eBand width and edge profile minimize hose damage while providing grip\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the stainless-steel construction important?\u003c\/h3\u003e\n\u003cp\u003eAll components—band, housing, and screw—are made from 300-series stainless steel, which provides superior resistance to rust and staining versus plated or mixed-metal clamps. This makes them suitable for wet, salty, or outdoor environments where longevity and appearance matter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete 300-series stainless for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eIdeal for marine and outdoor exposure without sacrificial plating\u003c\/li\u003e\n  \u003cli\u003eLonger life-cycle reduces replacement frequency and maintenance\u003c\/li\u003e\n  \u003cli\u003eConsistent performance in damp, humid, or chemically mild settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and applications are these clamps best for?\u003c\/h3\u003e\n\u003cp\u003eEach clamp covers a working range of 90mm–114mm (approximately 3.54\"–4.5\"), which fits many medium-diameter hoses, vents, and tubing found in engines, pumps, and plumbing systems. They’re multi-purpose fasteners used across automotive repair, agriculture equipment, construction gear, and household jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon for coolant hoses, intake boots, and ducting in vehicles\u003c\/li\u003e\n  \u003cli\u003eUseful for securing irrigation lines, pump connections, and couplers\u003c\/li\u003e\n  \u003cli\u003eSuitable for marine bilge systems and saltwater-exposed assemblies\u003c\/li\u003e\n  \u003cli\u003eHandy in workshop or home repairs where a tight clamp is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy are these clamps to install and reuse?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward with a flathead screwdriver or 5\/16\" hex driver; the inner worm gear offers fine adjustment so you can fit the clamp precisely. Because they’re stainless steel and mechanically tightened, they can be removed and reused multiple times without losing clamping integrity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjust with standard screwdriver or nut driver\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeated removal and reinstallation\u003c\/li\u003e\n  \u003cli\u003eSmooth band action reduces thread wear over multiple cycles\u003c\/li\u003e\n  \u003cli\u003ePack of 10 provides spares or multiple uses across projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These ROADFORMER stainless-steel 4\" hose clamps are aimed at mechanics, boat owners, farmers, contractors, and DIYers who need a dependable, corrosion-resistant clamp in a mid-size range. If you want a reusable, precision-adjustable clamp for medium-diameter hoses and fittings—especially in environments exposed to moisture or salt—this 10-pack is a practical and cost-effective choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What hose diameter do these clamps fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They adjust to fit hose outer diameters from 90mm to 114mm (about 3.54\"–4.5\").\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these clamps rust-resistant for marine use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—band, housing, and screw are 300-series stainless steel, suitable for marine exposure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55166640914775,"sku":"B086M7KW9K","price":37.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging-4-inch-clamps.jpg?v=1790369379"},{"product_id":"roadformer-3-stainless-steel-hose-clamps-65-89mm-10-pack-full-300-series-corrosion-resistant","title":"ROADFORMER 3\" Stainless Steel Hose Clamps 65–89mm (10-Pack) — Full 300-Series, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 3 inch hose clamp is a fully stainless steel worm-gear band that secures hoses and pipes from 65mm to 89mm (2.56\"–3.5\") and comes in a 10-piece pack for heavy-duty or everyday use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese clamps combine a 300-series stainless steel band, housing, and slotted hex head screw with an internal worm gear to deliver corrosion resistance, reliable tightening and long service life. Designed for applications from automotive and marine to agricultural and home plumbing, the ROADFORMER clamp gives a predictable torque range and a clean, low-profile finish on hose connections.\u003c\/p\u003e\n\n\u003ch3\u003eHow precisely does this clamp adjust to different hose sizes?\u003c\/h3\u003e\n\u003cp\u003eThe internal worm-gear mechanism lets you smoothly change the band diameter, making it simple to fine-tune fit on hoses, tubes and ducts between 65mm and 89mm. The slotted 5\/16\" hex screw accepts standard tools for controlled tightening, minimizing damage to the hose.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking range: 65mm–89mm (2.56\"–3.5\").\u003c\/li\u003e\n  \u003cli\u003eScrew type: 5\/16\" slotted hex head for ratchet or screwdriver use.\u003c\/li\u003e\n  \u003cli\u003eAdjustment feel: smooth increments via inner worm gear.\u003c\/li\u003e\n  \u003cli\u003eInstallation torque target: 35–45 in·lbs (4.0–5.1 Nm).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features protect it outdoors or near water?\u003c\/h3\u003e\n\u003cp\u003eEvery structural component — band, housing and screw — is made from 300-series stainless steel, chosen for its resistance to rust and pitting in wet or salty environments. The all-stainless design keeps the clamp functional longer than plated or mixed-metal alternatives under repeated use or exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: full 300-series stainless steel construction.\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistance: suitable for marine and outdoor exposure.\u003c\/li\u003e\n  \u003cli\u003eLongevity: designed for repeated installation and removal.\u003c\/li\u003e\n  \u003cli\u003eFinish: smooth band edge reduces abrasion to hoses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere will this clamp work best and what applications fit it?\u003c\/h3\u003e\n\u003cp\u003eROADFORMER clamps are intended for a wide range of settings including automotive coolant and intake hoses, irrigation and farm equipment, construction machinery lines, household plumbing, and marine fittings. Their moderate size and torque rating make them versatile for both professional trades and DIY projects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon uses: automotive, agricultural, marine, plumbing, HVAC.\u003c\/li\u003e\n  \u003cli\u003eEnvironments: indoor, outdoor, wet or dusty conditions.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: hoses, tubes, cables and small ducts within range.\u003c\/li\u003e\n  \u003cli\u003ePack size: 10 clamps per box for jobs requiring multiple fasteners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much tightening force should I apply and how to avoid over-torquing?\u003c\/h3\u003e\n\u003cp\u003eTo achieve a secure seal without damaging hose material, aim for the recommended installation torque range of 35–45 in·lbs; the clamp will support an ultimate torque around 60 in·lbs. Use a torque screwdriver or a controlled ratchet and stop once the hose compresses evenly under the band.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstallation torque: 35–45 in·lbs (4.0–5.1 Nm).\u003c\/li\u003e\n  \u003cli\u003eUltimate torque capacity: approximately 60 in·lbs (6.8 Nm).\u003c\/li\u003e\n  \u003cli\u003eTool suggestions: torque screwdriver, 5\/16\" hex socket, or ratchet with stop.\u003c\/li\u003e\n  \u003cli\u003eTip: tighten gradually and check for uniform hose compression.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ROADFORMER 3 inch stainless steel hose clamp 10-pack is aimed at professionals and hobbyists who need corrosion-resistant, repeatable hose fastening across a variety of settings. It's well suited to mechanics, marine technicians, farmers, contractors, and homeowners tackling plumbing, irrigation or machine maintenance projects who want a reliable clamp that balances adjustability and durability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these clamps resist rust in saltwater environments?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Made entirely from 300-series stainless steel, they are designed to resist corrosion in wet and marine conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use a regular screwdriver to tighten these clamps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 5\/16\" slotted hex head accepts both standard screwdrivers and ratchets; a torque driver is recommended for precise tightening.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55166641176919,"sku":"B086M4MMB3","price":36.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging-clamps.jpg?v=1790369401"},{"product_id":"roadformer-3-5-t-bolt-hose-clamp-95-103mm-3-5in-2-pack-304-stainless-heavy-duty-seal","title":"ROADFORMER 3.5\" T-Bolt Hose Clamp 95–103mm (3.5in) 2-Pack — 304 Stainless, Heavy-Duty Seal","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 3.5 in T-bolt hose clamps are heavy-duty 304 stainless steel clamps sized for 95–103mm (3.74\"–4.06\") hose O.D., sold as a two-pack for durable, even sealing on turbo, intake, coolant and intercooler connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese clamps combine a broad 3\/4\" corrosion-resistant band, a 1\/4\"-28 stainless T-bolt, and a floating bridge to deliver consistent pressure across silicone and rubber hoses without slicing into the hose wall. They are engineered for applications that require reliable fastening under pressure and vibration, including automotive, marine, agricultural and industrial equipment. Before buying, check your hose outside diameter to confirm it falls within the specified working range.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps create a secure seal on silicone and rubber hoses?\u003c\/h3\u003e\n\u003cp\u003eThe heavy-duty T-bolt tightens evenly across the clamp band while the floating bridge spreads the load so the hose sees uniform compression. Smooth, rounded band edges reduce the chance of cutting or abrading softer hoses when tightened to clamp pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEven clamping from the T-bolt to prevent localized pinching\u003c\/li\u003e\n  \u003cli\u003eFloating bridge disperses force across the silicone or rubber surface\u003c\/li\u003e\n  \u003cli\u003eRounded 3\/4\" band edges protect hose wall integrity\u003c\/li\u003e\n  \u003cli\u003e304 stainless components resist corrosion in wet environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and hose types are compatible with the 95–103mm clamp range?\u003c\/h3\u003e\n\u003cp\u003eThese clamps are sized to fit a nominal 3.5\" inner diameter hose whose outside diameter measures between 95mm and 103mm (3.74\"–4.06\"). They work best on hoses with typical SAE wall thicknesses around 3–6mm, such as intercooler boots, intake couplers, radiator hoses and turbo connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 3.5\" nominal I.D. hoses with 3–6mm wall thickness\u003c\/li\u003e\n  \u003cli\u003eMeasure hose O.D. first to confirm fit within 95–103mm\u003c\/li\u003e\n  \u003cli\u003eAppropriate for silicone, EPDM, and reinforced rubber hoses\u003c\/li\u003e\n  \u003cli\u003eCommon uses: turbo pipes, intercooler couplers, coolant and radiator hoses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the construction affect corrosion resistance and longevity?\u003c\/h3\u003e\n\u003cp\u003eThe band is made from 304 stainless steel, and the T-bolt plus fasteners use 300-series stainless components, giving balanced resistance to rust in road, marine and workshop conditions. The hardware combination supports long-term service life while maintaining clamp torque and sealing performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e304 stainless steel band for baseline corrosion protection\u003c\/li\u003e\n  \u003cli\u003e300-series stainless T-bolt and locknut retain clamping torque\u003c\/li\u003e\n  \u003cli\u003eMaterials suited for wet, salty or oily environments\u003c\/li\u003e\n  \u003cli\u003eRobust build reduces need for frequent retightening or replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: slide the clamp over the hose, position it at the connection, then tighten the T-bolt with a wrench or socket until the seal is snug. The design is user-friendly for mechanics and DIYers, and the wide band gives a larger contact area for a reliable connection without special tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlide on, position, then tighten with a common wrench or socket\u003c\/li\u003e\n  \u003cli\u003eWide band allows controlled torque application and easier alignment\u003c\/li\u003e\n  \u003cli\u003eNylon-insert locknut helps maintain tension under vibration\u003c\/li\u003e\n  \u003cli\u003eTwo clamps included for paired connections or spares\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ROADFORMER 3.5 in T-bolt hose clamps suit professionals and enthusiasts who need robust, repeatable hose connections—mechanics, turbo and intercooler tuners, marine technicians, farm equipment maintainers, and anyone fitting silicone or rubber hoses that demand a heavier-duty clamp than worm-gear options. Measure your hose O.D. first to confirm compatibility and choose these clamps when even pressure distribution, corrosion resistance and durable sealing matter most.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this clamp fit a 3.5\" silicone intercooler hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your hose outside diameter measures between 95mm and 103mm (3.74\"–4.06\"), yes; measure the O.D. before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools are needed to tighten the ROADFORMER T-bolt clamp?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A common wrench or socket that fits a 1\/4\"-28 T-bolt head is sufficient; no specialty tools required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55166642749783,"sku":"B0F4KC277M","price":37.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-view-clamp-packaging.jpg?v=1790369448"},{"product_id":"roadformer-3-5-stainless-steel-narrow-band-exhaust-clamp-2-pack-10-9-grade-bolt-360-seal","title":"ROADFORMER 3.5\" Stainless Steel Narrow-Band Exhaust Clamp 2-Pack — 10.9 Grade Bolt, 360° Seal","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 3.5 inch Narrow Band Stainless Steel Exhaust Clamp (2 pack) is a no-weld, heavy-duty clamp built to join 3.5\" OD-to-ID slip-fit exhaust connections with an even, damage-reducing seal.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis two-pack of stainless steel narrow band clamps is engineered for muffler inlets\/outlets, elbows, catalytic converter joints and general exhaust repairs where a tight, serviceable connection is required. Each clamp includes pre-attached hardware and a high-strength 10.9 grade bolt, so you can install or remove the clamp without welding. The narrow band profile keeps the joint compact while Roadformer’s Reaction Block Technology spreads force to minimize pipe distortion.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this clamp create a reliable seal without welding?\u003c\/h3\u003e\n\u003cp\u003eThe clamp uses a continuous narrow stainless band and a hardened 10.9 grade bolt to compress the joint uniformly. Roadformer’s Reaction Block Technology distributes clamping pressure around the pipe, reducing localized crushing and improving contact for a dependable mechanical seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e360° clamping action for full circumference compression\u003c\/li\u003e\n  \u003cli\u003eHardened bolt rated 10.9 for consistent torque and retention\u003c\/li\u003e\n  \u003cli\u003eNarrow band profile for compact installation in tight exhaust runs\u003c\/li\u003e\n  \u003cli\u003eRecommended working torque: 40–50 ft-lbs for best seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these clamps fit my exhaust system and specific pipes?\u003c\/h3\u003e\n\u003cp\u003eThese clamps are sized to join a 3.5\" outside-diameter (OD) pipe into a 3.5\" inside-diameter (ID) pipe in slip-fit arrangements. They are ideal for many common exhaust components including muffler inlets\/outlets, tubing sections, elbows and aftermarket adapters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for 3.5\" OD-to-3.5\" ID slip-fit connections\u003c\/li\u003e\n  \u003cli\u003eWorks with typical exhaust tubing, mufflers and converters of matching size\u003c\/li\u003e\n  \u003cli\u003ePre-attached hardware fits standard wrench or socket sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the stainless steel construction and what maintenance is needed?\u003c\/h3\u003e\n\u003cp\u003eThe band is stainless steel for corrosion resistance and long service life in high-heat, exposed environments. Proper torque during installation and occasional inspection are all that’s needed; if desired, exhaust-approved sealant can be applied before clamping to improve leak resistance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel band resists rust and road corrosion\u003c\/li\u003e\n  \u003cli\u003e10.9 grade bolt retains clamping force under vibration\u003c\/li\u003e\n  \u003cli\u003eSimple periodic checks recommended after long-term exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools or materials help?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: slip the OD pipe into the ID pipe, position the clamp, and tighten the bolt to the recommended torque. No welding or specialized fabrication tools are required, and the clamp can be removed or replaced for service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-attached hardware reduces alignment steps and speeds installation\u003c\/li\u003e\n  \u003cli\u003eUse a torque wrench to achieve 40–50 ft-lbs for best results\u003c\/li\u003e\n  \u003cli\u003eOptional: apply exhaust sealant before tightening for improved leak control\u003c\/li\u003e\n  \u003cli\u003eComes as a 2-pack for repairs or parallel installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These ROADFORMER 3.5\" narrow band clamps suit mechanics, custom exhaust builders, DIY vehicle owners and repair shops needing a fast, reliable, non-welded exhaust joint. They are particularly useful when space is limited and a neat, serviceable connection is preferred. If you work with 3.5\" slip-fit exhaust components and want stainless durability with even clamping performance, this two-pack offers practical value and dependable service life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these clamps instead of welding an exhaust joint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the clamps are designed for no-weld slip-fit repairs, providing a removable, serviceable joint when tightened to recommended torque.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these clamps fit any 3.5\" exhaust pipe?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit a 3.5\" OD pipe into a 3.5\" ID slip-fit connection; verify pipe diameters before purchase for proper fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55166663590231,"sku":"B09TP8S4FT","price":37.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-view-packaging.jpg?v=1790369692"},{"product_id":"roadformer-3-exhaust-clamp-narrow-band-stainless-steel-2-pack-360-seal-no-weld-repair","title":"ROADFORMER 3\" Exhaust Clamp Narrow Band Stainless Steel - 2 Pack, 360° Seal, No-Weld Repair","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 3 inch Narrow Band Stainless Steel Exhaust Clamp (2 pack) is a no-weld, slip-fit clamp engineered to join 3\" OD into 3\" ID exhaust tubing with a durable, corrosion-resistant seal.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese clamps are built for exhaust repair and customization where a compact, high-strength connection is needed without welding. Constructed with a stainless steel narrow band and a hardened 10.9 grade bolt, the clamps deliver even 360° clamping while reducing the risk of pipe distortion. Each set includes two pre-assembled clamps so you can quickly replace worn hardware or secure a muffler, catalytic converter, elbow, or pipe joint with professional-looking results.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this clamp create a reliable leak-resistant joint?\u003c\/h3\u003e\n\u003cp\u003eThe ROADFORMER clamp uses a narrow stainless band and Reaction Block technology to evenly distribute tightening force around the pipe. This balanced clamping minimizes localized crushing while producing consistent compression for better sealing performance. For improved results, an exhaust sealant can be applied to the mating surfaces before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e360° Reaction Block distribution reduces pipe distortion\u003c\/li\u003e\n  \u003cli\u003e10.9 grade bolt provides high torque capability (recommended 40–50 ft-lbs)\u003c\/li\u003e\n  \u003cli\u003eNarrow band concentrates sealing where needed without bulk\u003c\/li\u003e\n  \u003cli\u003ePre-assembled hardware for consistent clamp positioning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install these clamps without welding or special tools?\u003c\/h3\u003e\n\u003cp\u003eYes—these clamps are designed for no-weld slip-fit installations. The pre-attached bolt and nut make them user-friendly for home mechanics and pros alike; you only need basic hand tools to tighten to the recommended torque. That makes them ideal for quick repairs, temporary joins, or permanent clamps when welding isn’t practical.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-attached hardware reduces installation steps\u003c\/li\u003e\n  \u003cli\u003eRequires common tools (ratchet and torque wrench recommended)\u003c\/li\u003e\n  \u003cli\u003eNo welding means faster, cleaner installation\u003c\/li\u003e\n  \u003cli\u003eSuitable for field repair, shop work, or custom exhaust builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat pipe sizes and applications are these clamps suited for?\u003c\/h3\u003e\n\u003cp\u003eThese clamps are specifically sized for slip-fit connections where a 3\" OD pipe inserts into a 3\" ID pipe. They work well across typical exhaust components including muffler inlets\/outlets, catalytic converters, elbows, and straight pipe sections. Use them to replace corroded clamps or to finish a custom exhaust run.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 3\" OD into 3\" ID slip-fit connections\u003c\/li\u003e\n  \u003cli\u003eCommon uses: muffler, catalytic converter, elbow joints, pipe repair\u003c\/li\u003e\n  \u003cli\u003ePack includes two clamps for single or paired connections\u003c\/li\u003e\n  \u003cli\u003eCompact narrow-band profile fits confined spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant are these clamps?\u003c\/h3\u003e\n\u003cp\u003eMade from stainless steel, the narrow band and hardware resist corrosion better than standard painted clamps, extending service life in harsh exhaust environments. The high-strength 10.9 grade bolt sustains repeated torque cycles, allowing serviceability without sacrificing clamping force. For longevity, ensure bolts are torqued to the recommended specification and inspect periodically in high-exposure applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel band for rust resistance and long life\u003c\/li\u003e\n  \u003cli\u003e10.9 grade bolt holds clamp tension through use\u003c\/li\u003e\n  \u003cli\u003eCompact profile reduces exposure to road debris\u003c\/li\u003e\n  \u003cli\u003eRemovable design supports future maintenance or reuse\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ROADFORMER 3 inch Narrow Band Exhaust Clamps are intended for automotive enthusiasts, exhaust repair technicians, and DIY mechanics who need a compact, strong, no-weld solution for 3\" slip-fit exhaust joints. They are especially useful when space limits a wide band clamp or when a clean, serviceable connection is preferred over welding. If you work on muffler swaps, catalytic converter replacements, or custom exhaust fabrication where reliability and corrosion resistance matter, this 2-pack offers a practical, professional-grade option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this clamp fit a 3-inch exhaust pipe?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s designed for slip-fit connections where a 3\" OD pipe inserts into a 3\" ID pipe.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to weld after installing the clamp?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No welding is required; the clamp provides a removable, serviceable seal when torqued properly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55166663655767,"sku":"B09TP89Y85","price":36.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-clamp-front-view.jpg?v=1790369690"},{"product_id":"roadformer-4-t-bolt-hose-clamp-108-116mm-2-pack-stainless-steel-spring-loaded-constant-tension","title":"ROADFORMER 4\" T-Bolt Hose Clamp 108–116mm (2-Pack) Stainless Steel, Spring-Loaded Constant-Tension","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 4\" stainless steel spring-loaded T-bolt hose clamps are heavy-duty, constant-tension clamps sized for 108–116mm (4.25\"–4.57\") hose outer diameters, sold as a convenient 2-pack for reliable sealing under thermal and pressure cycling.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese T-bolt clamps combine a stainless steel band and bolt with a zinc-plated carbon spring and floating bridge to deliver a durable, vibration-resistant connection for larger silicone and rubber hoses. Designed to compensate automatically for thermal expansion and contraction, they maintain uniform sealing pressure across a range of temperatures and demanding operating conditions common in automotive, marine, agriculture, and racing environments.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps keep a seal when temperatures change?\u003c\/h3\u003e\n\n\u003cp\u003eThe spring-loaded design applies constant tension so the clamp adapts to hose expansion and contraction without loosening. That continuous pressure reduces the risk of leaks that can form when materials expand, contract, or soften under heat.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt-in zinc plated carbon spring maintains steady clamp force through thermal cycles\u003c\/li\u003e\n  \u003cli\u003eFloating bridge prevents point-loading and promotes even compression around the hose\u003c\/li\u003e\n  \u003cli\u003eStainless steel band and bolt resist deformation at high torque\u003c\/li\u003e\n  \u003cli\u003eSuitable for high-temp silicone and engine coolant hoses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and hose types do these 4\" clamps fit?\u003c\/h3\u003e\n\n\u003cp\u003eEach clamp fits hoses with outer diameters between 108mm and 116mm (4.25\"–4.57\"), matching common 4\" nominal hose sizes and wall thicknesses from about 3mm to 6mm. Always measure the hose outside diameter to confirm compatibility before installation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorking range: 108mm–116mm (4.25\"–4.57\")\u003c\/li\u003e\n  \u003cli\u003eRecommended for 4\" nominal hoses with 3–6mm wall thickness\u003c\/li\u003e\n  \u003cli\u003eCommon hose types: silicone, reinforced rubber, coolant and intercooler hoses\u003c\/li\u003e\n  \u003cli\u003eSold as a 2-pack for spares or dual-hose installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are ROADFORMER T-bolt clamps in harsh environments?\u003c\/h3\u003e\n\n\u003cp\u003eConstructed with a stainless steel band and bolt plus corrosion-resistant components, these clamps stand up to temperature swings, vibration, and engine bay contaminants. The robust build minimizes maintenance and supports long service life even in off-highway or marine settings.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStainless steel parts resist rust and maintain strength\u003c\/li\u003e\n  \u003cli\u003eZinc-plated spring and nylon-insert locknut resist corrosion and loosening\u003c\/li\u003e\n  \u003cli\u003eDesigned for shock and vibration-prone applications like racing and heavy equipment\u003c\/li\u003e\n  \u003cli\u003eFloating bridge design distributes load and prevents hose damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and torque these clamps for best results?\u003c\/h3\u003e\n\n\u003cp\u003eInstall the clamp so the band sits squarely around the hose bead, then tighten the nylon-insert locknut by hand first and finish with a torque wrench to the manufacturer’s recommended setting. Avoid over-torquing to protect the hose and spring mechanism.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePosition clamp over the hose bead or raised lip for best sealing\u003c\/li\u003e\n  \u003cli\u003eTighten evenly, checking alignment of the floating bridge\u003c\/li\u003e\n  \u003cli\u003eUse a torque wrench and avoid excessive force that could crush hose material\u003c\/li\u003e\n  \u003cli\u003eInspect periodically for corrosion, spring tension, and secure fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These ROADFORMER spring-loaded T-bolt clamps are aimed at mechanics, performance enthusiasts, fleet operators, and equipment technicians who need reliable, long-lasting hose connections under fluctuating temperatures and vibration. They’re ideal for intercooler and charge-air systems, engine coolant lines, marine hoses, agricultural machinery, and any application where a uniform, high-strength seal is required. Choose these clamps when you need a professional-grade, constant-tension solution that reduces leak risk and maintenance intervals.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these clamps fit a 4\" silicone intercooler hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they fit hoses with outer diameters from 108mm to 116mm (4.25\"–4.57\") and are suited to silicone intercooler hoses with 3–6mm wall thickness.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I reuse these spring-loaded T-bolt clamps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they are reusable if the spring and threads remain undamaged; inspect for corrosion or weakened tension before reusing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55166663885143,"sku":"B0FSD44BFB","price":38.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-view-t-bolt-clamp-4-inch.jpg?v=1790369714"},{"product_id":"roadformer-4-inch-exhaust-clamp-narrow-band-stainless-steel-2-pack-no-weld-360-seal","title":"ROADFORMER 4-inch Exhaust Clamp Narrow Band Stainless Steel — 2 Pack, No-Weld 360° Seal","description":"\u003cstrong\u003eROADFORMER 4 inch Narrow Band Stainless Steel Exhaust Clamp (2 pack) is a no-weld solution that seals 4\" OD into 4\" ID slip-fit exhaust connections with even 360° clamping and durable corrosion resistance.\u003c\/strong\u003e\n\n\u003cp\u003eThis pair of ROADFORMER clamps is engineered for connecting 4-inch outside-diameter pipe into 4-inch inside-diameter fittings such as muffler inlets\/outlets, elbows, catalytic housings, and standard exhaust sections. Constructed from stainless steel with a narrow band profile, the clamps are built to fit in tight spaces while providing a strong, serviceable seal without requiring welding. Pre-attached hardware speeds installation and simplifies maintenance or replacement.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this clamp create a reliable seal without welding?\u003c\/h3\u003e\n\u003cp\u003eThe ROADFORMER clamp uses a narrow stainless band combined with Reaction Block Technology to distribute force evenly around the pipe circumference. That balanced clamping reduces distortion and squeezes the joint tightly enough to hold exhaust gases and resist vibration-driven loosening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e360° even pressure distribution from the internal reaction block\u003c\/li\u003e\n  \u003cli\u003e10.9 grade bolt delivers high clamping torque for a tight joint\u003c\/li\u003e\n  \u003cli\u003eNarrow band profile fits cramped or recessed exhaust passages\u003c\/li\u003e\n  \u003cli\u003eCan be combined with exhaust sealant for improved leak control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these clamps resist rust and last through road conditions?\u003c\/h3\u003e\n\u003cp\u003eYes—the clamps are made from stainless steel to stand up to moisture, salt, and high exhaust temperatures better than standard plated clamps. The corrosion-resistant finish extends service life and reduces the chance of seizing, even in harsh climates or winter driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel band resists corrosion and pitting\u003c\/li\u003e\n  \u003cli\u003eHardware specified to 10.9 grade for durability under load\u003c\/li\u003e\n  \u003cli\u003eNarrow, compact construction limits surface exposure to elements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size and applications are these clamps suitable for?\u003c\/h3\u003e\n\u003cp\u003eThese clamps are specifically sized for 4\" OD pipe into 4\" ID slip-fit joints—common across many aftermarket and OEM exhaust systems. They work well for muffler connections, pipe-to-pipe joins, elbows, and catalytic converter housings where a snug mechanical joint is needed without permanent welding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to join 4\" OD pipe into 4\" ID fittings\u003c\/li\u003e\n  \u003cli\u003eFits muffler inlets\/outlets, elbows, and converter connections\u003c\/li\u003e\n  \u003cli\u003eUseful for repair, replacement, and custom exhaust builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what torque should I use?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: slide the clamp over the slip-fit joint, position the reaction block, and tighten the bolt. The pre-attached hardware keeps alignment accurate and allows future removal if adjustments are needed. For best results tighten to the recommended working torque so the clamp seals without damaging the pipe.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-attached hardware for quick, accurate placement\u003c\/li\u003e\n  \u003cli\u003eRecommended working torque: 40–50 ft-lbs for secure sealing\u003c\/li\u003e\n  \u003cli\u003eApply exhaust sealant before installation if additional leak protection is desired\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: mechanics, DIY enthusiasts, and exhaust fabricators who need a compact, high-strength clamp to join 4\" slip-fit exhaust components without welding. If you require a re-usable, corrosion-resistant clamp for repairs, replacements, or custom exhaust routing in tight spaces, the ROADFORMER 4\" narrow band clamp 2-pack offers an affordable, professional-grade option that balances sealing performance and ease of service.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these clamps on pipes that aren't exactly 4\"?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are made for 4\" OD into 4\" ID slip-fit joints; slight size variations may work but optimal sealing requires matching pipe diameters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to weld after installing these clamps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—these clamps provide a no-weld mechanical seal; welding is optional if you want a permanent joint.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55166677844311,"sku":"B09TP9FF18","price":38.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-view-4in-clamp.jpg?v=1790370072"},{"product_id":"roadformer-3-t-bolt-hose-clamps-3-81-89mm-2-pack-stainless-steel-spring-loaded","title":"ROADFORMER 3\" T-Bolt Hose Clamps 3\" (81–89mm) 2-Pack — Stainless Steel, Spring-Loaded","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 3\" spring-loaded T-bolt hose clamps are heavy-duty 81–89mm (3.19–3.50\") stainless-steel clamps sold in a 2-pack that keep hose assemblies sealed under thermal cycling and vibration.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese clamps combine a stainless steel band and bolt with a zinc-plated carbon spring, floating bridge and nylon-insert locknut to deliver a constant-tension seal for 3\" nominal hoses (recommended hose wall 3–6mm). They are engineered for applications where temperature swings, pressure spikes and vibration threaten conventional worm-drive clamps—commonly used on turbocharger silicone hoses, intercoolers, cooling systems and marine or agricultural equipment.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these spring-loaded T-bolt clamps handle temperature changes?\u003c\/h3\u003e\n\u003cp\u003eThe built-in spring compensates for expansion and contraction of hoses and fittings so the clamp maintains even sealing pressure through hot and cold cycles. Instead of losing grip as the hose material moves, the spring applies continuous tension to prevent gaps and leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomatic tensioning via zinc-plated carbon spring for thermal movement\u003c\/li\u003e\n  \u003cli\u003eFloating bridge reduces point-load stress on hose material\u003c\/li\u003e\n  \u003cli\u003eStainless-steel band and bolt resist deformation at high temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and hose types do these clamps fit?\u003c\/h3\u003e\n\u003cp\u003eEach clamp covers a working diameter range of 81–89mm (3.19–3.50\"), matching a 3\" nominal hose with wall thickness between 3mm and 6mm. Always measure your hose outer diameter (OD) to confirm it falls inside this working range before buying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking diameter: 81mm–89mm (3.19\"–3.50\")\u003c\/li\u003e\n  \u003cli\u003eDesigned for 3\" nominal hoses with 3–6mm wall thickness\u003c\/li\u003e\n  \u003cli\u003eSold as a convenient 2-pack for matching connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose a T-bolt clamp over a worm-drive clamp?\u003c\/h3\u003e\n\u003cp\u003eT-bolt clamps distribute pressure more evenly around the hose and the spring-loaded design keeps tension consistent, which reduces the chance of leaks under high boost, vibration or repeated thermal cycling. They are a common choice for performance and heavy-duty installations where reliability matters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMore uniform sealing pressure from full-band contact\u003c\/li\u003e\n  \u003cli\u003eHigher resistance to loosening from vibration and shock\u003c\/li\u003e\n  \u003cli\u003eRobust construction for demanding automotive, marine, and industrial use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components and materials make up the clamp?\u003c\/h3\u003e\n\u003cp\u003eThe clamp pairs a corrosion-resistant stainless steel band and bolt with a zinc-plated carbon spring that provides the constant tension. A floating bridge reduces concentrated stress on the hose, while a nylon-insert locknut helps prevent loosening under vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel band and bolt for strength and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eZinc-plated carbon spring for durable tensioning\u003c\/li\u003e\n  \u003cli\u003eFloating bridge and nylon-insert locknut for secure, even sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? ROADFORMER 3\" T-bolt spring-loaded clamps are ideal for mechanics, tuners and fleet technicians who need durable, leak-resistant connections on turbocharger and intercooler hoses, primary engine cooling lines, marine cooling systems, agricultural equipment and off-highway machinery. Choose these clamps when you require a long-lasting, vibration-resistant seal that copes with wide temperature swings and heavy-duty operating conditions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this clamp fit a 3\" silicone intercooler hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—fits hoses with an OD between 81–89mm (3.19–3.50\") and wall thickness 3–6mm; measure your hose OD to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these clamps corrosion resistant for marine use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They use stainless steel for band and bolt and a zinc-plated spring, offering good corrosion resistance for many marine applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55166796530007,"sku":"B0FSD3J369","price":36.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging-3-inch-t-bolt-clamps.jpg?v=1790371342"},{"product_id":"roadformer-5-inch-t-bolt-hose-clamp-133-141mm-5-2-pack-304-stainless-nylon-locknut","title":"ROADFORMER 5-inch T-Bolt Hose Clamp 133–141mm (5\") 2-Pack — 304 Stainless, Nylon Locknut","description":"\u003cstrong\u003eROADFORMER 5 inch T-bolt hose clamps are heavy-duty 304 stainless steel fasteners sized for hoses with a 5.24\"–5.55\" outer diameter, supplied as a two-pack for secure, even sealing on intake, intercooler, radiator and turbo connections.\u003c\/strong\u003e\n\n\u003cp\u003eThese clamps are built to deliver a firm, uniform grip on hoses where a reliable, corrosion-resistant connection matters. Constructed from 300-series stainless steel and engineered with a floating bridge and nylon insert locknut, the ROADFORMER clamps resist rust while minimizing hose damage. They’re intended for hoses around a nominal 5\" inner diameter (133–141 mm working range) and are commonly used in automotive, marine, agricultural and industrial installations.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps protect silicone and rubber hoses?\u003c\/h3\u003e\n\u003cp\u003eThe 3\/4\" wide stainless band has smooth, rounded edges that reduce cutting or abrasion to hose walls, and the floating bridge spreads load evenly so the clamp body does not pinch a single point. Combined, these features extend hose life and preserve seal integrity during pressure cycles and vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/4\" wide 304 stainless band with rounded edges to lower abrasion risk\u003c\/li\u003e\n  \u003cli\u003eFloating bridge distributes clamp pressure across the connection\u003c\/li\u003e\n  \u003cli\u003eNylon-insert locknut prevents loosening from vibration\u003c\/li\u003e\n  \u003cli\u003eDesigned for hoses with ~3–6 mm wall thickness per SAE norms\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size hose will these clamps fit and how should I measure?\u003c\/h3\u003e\n\u003cp\u003eThe clamps cover an outer diameter range of 133–141 mm (about 5.24\"–5.55\"), targeting hoses sold as 5\" nominal I.D. To confirm fit, measure the hose outside diameter at the area where the clamp will sit; do not rely solely on nominal size labels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking range: 133–141 mm (5.24\"–5.55\") O.D.\u003c\/li\u003e\n  \u003cli\u003eBest for hoses with ~3–6 mm wall thickness\u003c\/li\u003e\n  \u003cli\u003eMeasure hose O.D. where the clamp will be installed\u003c\/li\u003e\n  \u003cli\u003eTwo clamps included for paired or backup use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant are these T-bolt clamps?\u003c\/h3\u003e\n\u003cp\u003eMade mainly from 304 stainless steel—including the 3\/4\" band and key hardware components—these clamps offer strong resistance to rust in typical automotive and marine environments. The heavy-duty T-bolt design provides consistent clamping force and long-term stability when properly installed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e304 stainless band and many 300-series hardware parts for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty T-bolt ensures even, firm clamping force\u003c\/li\u003e\n  \u003cli\u003eFloating bridge reduces stress concentrations that can cause early failure\u003c\/li\u003e\n  \u003cli\u003eNylon locknut helps maintain clamp tension under vibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: slide the clamp over the hose, position it over the mating fitting, and tighten with a standard wrench or socket. The T-bolt head accepts common hand tools and the clamps are sized to reach their sealing range without specialty equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlide-on design for quick placement\u003c\/li\u003e\n  \u003cli\u003eTighten with a wrench or socket—no specialty tool required\u003c\/li\u003e\n  \u003cli\u003eRe-check torque after initial run-in to ensure leak-free connection\u003c\/li\u003e\n  \u003cli\u003ePackage contains two clamps for paired installations or spares\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ROADFORMER 5 inch T-bolt hose clamps suit mechanics, tuners, fleet maintenance teams and DIY enthusiasts who need dependable, corrosion-resistant connectors for turbo hoses, intercooler pipes, radiator lines and industrial fluid systems. If you require strong, repeatable clamping for hoses around a 5\" nominal inner diameter and want hardware that resists corrosion and vibration, these two-pack stainless clamps are a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these clamps corrode in marine conditions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They use 304 stainless components which resist corrosion in many marine environments, though prolonged saltwater exposure may require more corrosion-resistant grades or maintenance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use one clamp per connection?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: One clamp is usually sufficient; use two when extra security is needed or when replacing existing dual-clamp setups.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55166806229335,"sku":"B0F4KBY9TM","price":39.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-view-clamp-pair.jpg?v=1790371755"},{"product_id":"roadformer-5-inch-exhaust-band-clamps-304-stainless-steel-2-pack-lap-joint-with-12-9-grade-bolts","title":"ROADFORMER 5-inch Exhaust Band Clamps — 304 Stainless Steel, 2-Pack Lap Joint with 12.9-Grade Bolts","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 5-inch 304 stainless steel lap joint exhaust band clamps (2-pack) are heavy-duty, corrosion-resistant clamps built to join 5\" OD to 5\" ID exhaust components with a full 360° sealing grip.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese clamps are engineered to secure muffler insets\/outsets, elbows, flex pipes and other exhaust connections without deforming tubing. Constructed from 304 stainless steel and fitted with high-strength 12.9-grade fasteners, the ROADFORMER clamps aim to deliver durable sealing force while minimizing exhaust leaks and rattles. A protective film on the band preserves the finish through storage and handling; remove it before installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps create a reliable seal on exhaust joints?\u003c\/h3\u003e\n\n\u003cp\u003eThe lap joint design wraps the overlapping pipe sections and tightens evenly around the circumference to compress the joint area. Because the band provides 360-degree contact, it reduces point loading and prevents localized pipe distortion that can cause gaps or leaks. The included high-strength bolts supply consistent torque for a tight mating surface.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFull 360° band contact to close gaps around insets and outlets\u003c\/li\u003e\n  \u003cli\u003eLap joint fits 5\" OD into 5\" ID pipe assemblies\u003c\/li\u003e\n  \u003cli\u003e12.9-grade fasteners for consistent clamping force\u003c\/li\u003e\n  \u003cli\u003eDesigned to minimize exhaust noise and gas leakage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and treatments improve corrosion resistance?\u003c\/h3\u003e\n\n\u003cp\u003eThese clamps use 304 stainless steel for the band and corrosion-resistant hardware to resist rust in road and exhaust environments. ROADFORMER performs salt-spray testing exceeding 100 hours on the band steel to validate long-term durability. A removable protective film guards the polished surface before use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e304 stainless steel band for oxidation and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eHardware specified at high-strength and treated for longevity\u003c\/li\u003e\n  \u003cli\u003eSalt-spray tested band steel for verified durability\u003c\/li\u003e\n  \u003cli\u003eProtective film prevents surface marring during storage and handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation for DIY and professional shops?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is fast and repeatable: position the band over the overlap, align the lap joint, and torque the fasteners evenly. The clamp’s reaction block helps protect pipe ends from being pinched or bent while tightening. Because the design avoids crushing the tube, it’s suitable for both field repairs and assembly-line use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSimple two-step fit-and-tighten process for quick installs\u003c\/li\u003e\n  \u003cli\u003eReaction block reduces damage to exhaust ends during clamping\u003c\/li\u003e\n  \u003cli\u003eEven torque distribution via high-strength bolts ensures uniform sealing\u003c\/li\u003e\n  \u003cli\u003eWorks with mufflers, elbows, flex pipes, and general exhaust tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these clamps fit my vehicle and typical exhaust parts?\u003c\/h3\u003e\n\n\u003cp\u003eThe clamps are sized specifically to join a 5\" outer-diameter pipe into a 5\" inner-diameter connection — a common sizing for many performance or heavy-duty exhaust systems. They are broadly compatible with automotive, commercial vehicle, and off-highway exhaust applications, provided the mating pipe dimensions match. For nonstandard pipe profiles or metric fittings, confirm measurements before purchase.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIntended for 5\" OD into 5\" ID exhaust connections\u003c\/li\u003e\n  \u003cli\u003eSuitable for passenger cars, trucks, and commercial\/off-highway equipment\u003c\/li\u003e\n  \u003cli\u003eNot recommended for mismatched or noncircular pipe profiles without verification\u003c\/li\u003e\n  \u003cli\u003eSold as a convenient 2-pack for repairs or dual-connection projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? ROADFORMER 5\" lap joint band clamps are aimed at automotive technicians, fabricators, performance enthusiasts, and fleet maintenance teams who need a robust, corrosion-resistant clamp that delivers even compression without deforming exhaust tubing. If you install or repair mufflers, tailpipes, elbows, or flex sections and require consistent sealing and long-term reliability, these clamps offer a practical solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these clamps join different wall thickness pipes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, within reason. They accommodate overlapping 5\" OD into 5\" ID pipes; verify fit if pipe wall thicknesses create large offset gaps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools required — a torque wrench or hand ratchet with appropriate socket ensures even, reliable tightening.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55166885560663,"sku":"B091DHGD87","price":37.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging-5inch-clamp.jpg?v=1790372611"},{"product_id":"roadformer-5-in-exhaust-clamp-narrow-band-stainless-steel-2-pack-360-seal-no-weld","title":"ROADFORMER 5 in Exhaust Clamp Narrow Band Stainless Steel — 2 Pack, 360° Seal, No‑Weld","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 5 inch Narrow Band Stainless Steel Exhaust Clamp (2 pack) is a heavy-duty, no-weld solution that seals 5\" OD to 5\" ID slip-fit exhaust joints with even 360° clamping.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for mufflers, tailpipes, catalytic converter connections and general exhaust repairs, this two-pack of ROADFORMER clamps combines corrosion-resistant stainless steel with a narrow profile that fits tight spaces while delivering reliable sealing power. The clamps include pre-attached hardware and a robust 10.9 grade bolt, so you can assemble or service exhaust sections quickly without specialized welding equipment.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this clamp create a reliable seal without welding?\u003c\/h3\u003e\n\u003cp\u003eThe ROADFORMER clamp uses a narrow stainless band and Reaction Block Technology to transfer tightening force uniformly around the pipe circumference, minimizing local distortion and maintaining a strong mechanical seal. Proper torque on the high-grade bolt compresses the joint for a serviceable connection that can be tightened or removed as needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e360° clamping with Reaction Block to reduce crushing or bending of pipe ends\u003c\/li\u003e\n  \u003cli\u003e10.9 grade bolt recommended torque 40–50 ft-lbs for best sealing\u003c\/li\u003e\n  \u003cli\u003ePre-attached hardware speeds installation and makes future removal simple\u003c\/li\u003e\n  \u003cli\u003eWorks with exhaust sealant applied before installation for enhanced leak resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the narrow band fit in tight or crowded exhaust layouts?\u003c\/h3\u003e\n\u003cp\u003eThe narrow-band design was developed specifically to clear nearby brackets, hangers, and vehicle underbody features where wider clamps won't fit. Its compact footprint lets you place a strong clamp in confined sections such as muffler inlets, outlets, and elbow joints.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlim profile to fit between adjacent components\u003c\/li\u003e\n  \u003cli\u003eSmooth inner band edge to reduce interference with pipe ends\u003c\/li\u003e\n  \u003cli\u003eStainless construction stays reliable even in compact mounting locations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size connections is this clamp intended for and what parts can it join?\u003c\/h3\u003e\n\u003cp\u003eThis clamp is engineered for slip-fit connections where a 5\" outside-diameter (OD) pipe inserts into a 5\" inside-diameter (ID) pipe. It is suitable for a wide range of exhaust components and repair scenarios where matching 5\" tubing is used.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnects 5\" OD pipe into 5\" ID pipe (slip-fit joints)\u003c\/li\u003e\n  \u003cli\u003eIdeal for muffler inlets, muffler outlets, elbows, and converter connections\u003c\/li\u003e\n  \u003cli\u003eUseful for aftermarket custom exhaust assemblies and roadside repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the clamp for long-term exhaust service?\u003c\/h3\u003e\n\u003cp\u003eConstructed from stainless steel and built with a high-strength 10.9 grade bolt, the clamp is made to resist corrosion and maintain clamping force under heat cycles and vibration common to exhaust systems. The materials and design reduce the need for frequent replacements compared with lower-grade clamps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel band resists rust and road corrosion\u003c\/li\u003e\n  \u003cli\u003e10.9 grade bolt holds torque through thermal cycling\u003c\/li\u003e\n  \u003cli\u003eReaction Block spreads force to limit pipe deformation and prolong joint life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Whether you are a professional exhaust fabricator, a DIY mechanic tackling a muffler or tailpipe repair, or a custom builder assembling a 5\" system, this ROADFORMER 2-pack provides an economical, removable, and robust clamping option. It’s particularly useful when welding isn’t practical or when you want a clean, serviceable connection that fits in constrained spaces.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this clamp on 5\" OD to 4.5\" ID connections?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — this clamp is designed specifically for 5\" OD into 5\" ID slip-fit joints and won’t seal properly on mismatched diameters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to weld after installing the clamp?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No welding is required; the clamp provides a removable mechanical seal, though exhaust sealant can improve leak resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55166960763223,"sku":"B09TPB3P1F","price":39.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-view-5-inch-clamp.jpg?v=1790373463"},{"product_id":"roadformer-2-5-stainless-steel-hose-clamps-52-76mm-10-pack-full-300-series-ss-worm-drive-torque-rated","title":"ROADFORMER 2.5\" Stainless Steel Hose Clamps 52–76mm (10 Pack) — Full 300-Series SS, Worm-Drive Torque Rated","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 2.5 inch hose clamps are fully stainless-steel adjustable worm-drive clamps sized for 52–76mm (2.05\"–3\") hoses, supplied as a 10-piece pack for automotive, marine, and general-purpose use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese clamps combine all-stainless construction with a wide adjustment range and quantified torque ratings to deliver corrosion-resistant hose retention for wet, outdoor, or industrial environments. Each clamp uses a 300-series stainless-steel band, housing and slotted hex screw so the assembly resists rust while providing repeatable clamping force for hoses, pipes and cable bundles.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps attach and adjust to different hose sizes?\u003c\/h3\u003e\n\u003cp\u003eThe ROADFORMER clamps use a worm-gear mechanism built into the housing so you can smoothly change diameter with a slotted 5\/16\" hex head screw. Turning the screw moves the band through the housing threads, letting you fine-tune the fit and compress the hose evenly around the circumference.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking diameter range: 52mm–76mm (about 2.05\"–3\").\u003c\/li\u003e\n  \u003cli\u003eHead type: slotted 5\/16\" hex for screwdriver or socket use.\u003c\/li\u003e\n  \u003cli\u003eInner worm-gear for precise, incremental adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features do these clamps offer?\u003c\/h3\u003e\n\u003cp\u003eAll structural parts — band, housing and screw — are manufactured from 300-series stainless steel for consistent corrosion resistance in damp and outdoor conditions. This full-stainless build reduces the chance of galvanic failure and extends service life compared with plated or mixed-metal clamps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: 300-series stainless steel (band, housing, screw).\u003c\/li\u003e\n  \u003cli\u003eDesigned for long life in marine, automotive and agricultural settings.\u003c\/li\u003e\n  \u003cli\u003eResists rust and pitting from salt spray and weather exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat clamping force and installation torque should I expect?\u003c\/h3\u003e\n\u003cp\u003eROADFORMER specifies measurable torque values so installers can achieve reliable retention without over-tightening. The clamps provide a minimum ultimate torque rating and a recommended installation torque band to help prevent damage to hoses while maintaining secure sealing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUltimate torque: typically reaches 60 in·lbs minimum (≈6.8 Nm).\u003c\/li\u003e\n  \u003cli\u003eRecommended installation torque: 35–45 in·lbs (≈4.0–5.1 Nm).\u003c\/li\u003e\n  \u003cli\u003eUse a torque screwdriver or wrench for repeatable results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere are these hose clamps best used?\u003c\/h3\u003e\n\u003cp\u003eWith their corrosion-resistant construction and adjustable range, these clamps are suitable for many sectors — from engine bays and marine lines to irrigation and workshop piping. The 10-piece pack makes them convenient for fleet maintenance, hobby projects or household repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon uses: automotive hoses, cooling lines, fuel vents, and vacuum lines.\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for marine fittings, agricultural equipment and plumbing.\u003c\/li\u003e\n  \u003cli\u003eHandy for cable bundling, duct fastening and temporary field repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Traders, mechanics, boat owners, farmers, DIYers and maintenance teams who need corrosion-resistant, easy-to-adjust hose clamps in a practical quantity. If you require reliable worm-drive clamps that specify torque limits and cover common hose diameters, the ROADFORMER 2.5\" stainless-steel 10-pack offers a cost-effective, durable solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What hose diameters do these clamps fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit hoses with outside diameters from 52mm to 76mm (about 2.05\"–3\").\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the clamps fully stainless steel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — band, housing and screw are all made from 300-series stainless steel.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55167049072983,"sku":"B086MJW9QF","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging-10-pack_81098123-7abe-424a-a756-a0f4fbaf89df.jpg?v=1790375662"},{"product_id":"roadformer-4-t-bolt-hose-clamp-108-116mm-2-pack-304-stainless-3-4-wide-band-for-silicone-rubber","title":"ROADFORMER 4\" T-Bolt Hose Clamp 108–116mm (2-Pack) — 304 Stainless, 3\/4\" Wide Band for Silicone \u0026 Rubber","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 4 inch T-bolt hose clamp (108–116mm) is a heavy-duty, 304 stainless steel two-pack designed to create an even, secure seal on 4\" nominal I.D. silicone, rubber, and reinforced hoses.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for demanding automotive and industrial hose connections, these clamps combine a wide 3\/4\" band, a corrosion-resistant 300-series T-bolt, and a floating bridge to spread clamping force without cutting into the hose wall. The clamps fit hoses with an outside diameter range of 108mm–116mm (approx. 4.25\"–4.57\") and are supplied with nylon-insert locknuts for long-lasting retention under vibration and thermal cycling.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps protect silicone and rubber hoses?\u003c\/h3\u003e\n\u003cp\u003eThe ROADFORMER clamps use a 3\/4\" wide stainless band with smooth, rounded edges to reduce pinch points and surface cutting that can weaken hose material. The floating bridge prevents concentrated pressure on one spot, so the clamp compresses the hose evenly around the circumference.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWide 3\/4\" band disperses pressure across more surface area\u003c\/li\u003e\n  \u003cli\u003eRounded edges reduce abrasion to silicone and rubber\u003c\/li\u003e\n  \u003cli\u003eFloating bridge avoids sharp localized compression\u003c\/li\u003e\n  \u003cli\u003eNylon-insert locknut holds torque under vibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these clamps resist corrosion in harsh environments?\u003c\/h3\u003e\n\u003cp\u003eYes — the band and hardware are made from 304 stainless steel and 300-series components, providing strong corrosion resistance for road, marine, and off-road use. Routine exposure to saltwater or chemicals will still slowly affect any metal, so inspect clamps periodically in extreme conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e304 stainless steel band resists oxidation and surface rust\u003c\/li\u003e\n  \u003cli\u003e300-series T-bolt hardware improves longevity in damp settings\u003c\/li\u003e\n  \u003cli\u003eDurable finish maintains clamp operation over time\u003c\/li\u003e\n  \u003cli\u003eRecommended periodic checks in marine or corrosive environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I choose the right size and install the clamp?\u003c\/h3\u003e\n\u003cp\u003eMeasure your hose outside diameter (O.D.) before ordering — these clamps fit 108–116mm (4.25\"–4.57\") O.D. for typical 4\" nominal I.D. hoses with 3–6mm wall thickness. Installation is straightforward: slide the clamp over the hose, position it at the joint, and tighten the T-bolt with a wrench until snug, avoiding overtightening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify hose O.D. falls within 108–116mm range\u003c\/li\u003e\n  \u003cli\u003ePosition clamp over the connection, then hand-start the nut\u003c\/li\u003e\n  \u003cli\u003eTighten with a wrench until even compression is achieved\u003c\/li\u003e\n  \u003cli\u003eDo not exceed recommended torque to prevent hose damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat applications benefit most from these T-bolt clamps?\u003c\/h3\u003e\n\u003cp\u003eThese clamps are built for high-pressure or high-vibration hose joins where uniform sealing is critical. They are commonly used on turbo inlet hoses, intercooler couplers, radiator and coolant lines, and in industrial machinery and agricultural equipment where a reliable hose seal is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurbo, intake, and intercooler hose connections\u003c\/li\u003e\n  \u003cli\u003eRadiator and coolant hose assemblies\u003c\/li\u003e\n  \u003cli\u003eMarine, off-road, and agricultural equipment hoses\u003c\/li\u003e\n  \u003cli\u003eIndustrial piping subject to vibration and thermal changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The ROADFORMER 4\" T-bolt clamp 2-pack is suited to mechanics, tuners, fleet maintenance teams, and DIY enthusiasts who need robust, repeatable hose seals for performance or heavy-duty applications. If you require corrosion-resistant hardware that spreads clamping force to protect hose integrity, and your hose O.D. measures between 108mm and 116mm, these clamps offer a reliable, easy-to-install solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What hose diameters do these clamps fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit hoses with an outside diameter of 108–116mm (approximately 4.25\"–4.57\").\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these clamps corrosion resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the band and hardware are 300\/304 stainless steel for good corrosion resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55167059296599,"sku":"B0F4KDHHWN","price":38.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-view-clamp-pack.jpg?v=1790376015"},{"product_id":"roadformer-3-5-exhaust-band-clamps-304-stainless-steel-2-pack-360-seal-12-9-grade-bolts","title":"ROADFORMER 3.5\" Exhaust Band Clamps 304 Stainless Steel — 2-Pack, 360° Seal \u0026 12.9-Grade Bolts","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 3.5 inch 304 stainless steel lap joint exhaust band clamps are heavy-duty, corrosion-resistant connectors designed to seal overlapping 3.5\" OD to 3.5\" ID exhaust joints quickly and securely.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two ROADFORMER clamps are engineered for muffler insets, outset connections, elbow joins, flex pipe links and other exhaust tubing where a tight lap-joint seal is required. Constructed from 304 stainless steel and fitted with high-strength 12.9-grade fasteners, they deliver a 360-degree clamping surface that helps prevent leaks and minimizes distortion of pipe ends. A protective film arrives on the band to reduce corrosion during storage; remove it before tightening. Tested for salt-spray resistance and built with ROADFORMER's reaction block innovation, the clamps balance sealing force with part protection during installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps create a reliable seal on overlapping exhaust pipes?\u003c\/h3\u003e\n\n\u003cp\u003eThe ROADFORMER lap joint band clamp wraps entirely around the overlap area to distribute compressive force evenly across the joint. This 360-degree contact reduces localized pinching or flattening of the pipe and produces a more uniform seal than point clamps. The included reaction block prevents the band from digging into the pipe edge when torque is applied.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-circumference stainless band for even pressure\u003c\/li\u003e\n  \u003cli\u003e12.9-grade fasteners for consistent tightening torque\u003c\/li\u003e\n  \u003cli\u003eReaction block protects pipe ends during installation\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for 3.5\" OD into 3.5\" ID lap joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these clamps withstand road and weather conditions without corroding?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the clamps use 304 stainless steel for the band and hardware, which offers good resistance to rust and common road salts. ROADFORMER subjects the band to over 100 hours of salt spray testing to verify corrosion resistance under harsh conditions. A protective film ships on the band to avoid surface damage during storage and handling; remove it before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e304 stainless construction resists rust and oxidation\u003c\/li\u003e\n  \u003cli\u003eSalt-spray tested for durability in corrosive environments\u003c\/li\u003e\n  \u003cli\u003eProtective film during shipping—peel off before installing\u003c\/li\u003e\n  \u003cli\u003eSuitable for automotive, commercial, and off-highway use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools are required?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward and fast: position the lap joint so the OD pipe nests into the ID pipe, slide the clamp over the overlap, and tighten the fastener to the specified torque. The band’s design and reaction block ensure accurate alignment and reduce the need for repeated adjustments. Use a socket or wrench sized for the clamp’s fastener and follow torque guidelines for a secure, leak-minimizing fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlip over joint, align band, tighten with a socket or wrench\u003c\/li\u003e\n  \u003cli\u003eReaction block prevents distortion during torqueing\u003c\/li\u003e\n  \u003cli\u003eFast, repeatable installation—saves time in shop or field\u003c\/li\u003e\n  \u003cli\u003eWorks well on mufflers, elbows, flex pipes and tubing joins\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size and compatibility should I expect for my exhaust system?\u003c\/h3\u003e\n\n\u003cp\u003eThese clamps are made specifically for a 3.5 inch nominal joint: they join a 3.5\" outside-diameter pipe into a 3.5\" inside-diameter pipe where components overlap. They are intended for typical automotive and commercial exhaust geometries where a lap-joint connection is used. If your pipe sizes or joint style differ, measure before ordering to ensure correct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 3.5\" OD to 3.5\" ID overlapping joints\u003c\/li\u003e\n  \u003cli\u003eCommonly used on muffler insets\/outsets and flex pipes\u003c\/li\u003e\n  \u003cli\u003eCheck actual pipe OD\/ID and overlap length before purchase\u003c\/li\u003e\n  \u003cli\u003eSold as a convenient 2-pack for repair or dual-connection needs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Professional mechanics, exhaust specialists, fleet maintenance crews and DIY enthusiasts who need a dependable lap-joint clamp for 3.5\" exhaust connections. If you require corrosion-resistant hardware with balanced sealing force and fast, consistent installation—ROADFORMER's stainless lap band clamps are made to perform in shop and on the road.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these clamps join 3.5\" OD into 3.5\" ID pipes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are specifically sized to seal a 3.5\" outside-diameter pipe overlapping into a 3.5\" inside-diameter pipe.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Should I remove the protective film before installing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Peel off the surface protection film prior to installation to ensure proper contact and corrosion resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55167074238807,"sku":"B091DN54S8","price":36.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-3.5in-front-packaging.jpg?v=1790376549"},{"product_id":"roadformer-5-stainless-steel-hose-clamps-116-140mm-4-57-5-5-10-pack-300-series-corrosion-resistant-worm-drive","title":"ROADFORMER 5\" Stainless Steel Hose Clamps 116–140mm (4.57–5.5\") — 10-Pack, 300-Series Corrosion-Resistant Worm-Drive","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 5\" hose clamps are fully stainless-steel adjustable clamps sized 116–140mm (4.57–5.5\") supplied in a 10-piece pack for secure, corrosion-resistant hose and pipe connections.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese heavy-duty, 300-series stainless steel worm-drive clamps are built for repeated use across automotive, marine, agricultural and household applications where a tight, reliable seal is needed. Each clamp features a slotted hex head screw and an inner worm-gear design that lets you fine-tune clamping pressure while resisting rust and wear. The pack includes ten identical clamps so you can outfit multiple hoses or keep spares on hand.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps achieve a tight, leak-resistant connection?\u003c\/h3\u003e\n\u003cp\u003eThe clamps use an inner worm gear and a 5\/16\" slotted hex head screw to compress the band evenly around hoses and fittings. Controlled torque reduces the chance of over-compression while keeping the connection stable under vibration and movement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner worm gear for smooth, precise diameter changes.\u003c\/li\u003e\n  \u003cli\u003eWorking range 116–140mm (4.57–5.5\") to fit common hose ODs.\u003c\/li\u003e\n  \u003cli\u003eInstallation torque recommended 35–45 in·lbs for consistent tightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the ROADFORMER clamps durable in harsh environments?\u003c\/h3\u003e\n\u003cp\u003eAll major components — band, housing and screw — are stainless steel 300-series, chosen for corrosion resistance and fatigue strength. The metal construction resists saltwater, chemicals and outdoor exposure better than plated or carbon-steel clamps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEntire clamp made from 300-series stainless steel for long life.\u003c\/li\u003e\n  \u003cli\u003eRobust band profile resists deformation under pressure.\u003c\/li\u003e\n  \u003cli\u003eSuitable for marine and outdoor use where corrosion is a concern.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy are these clamps to fit and adjust during installation?\u003c\/h3\u003e\n\u003cp\u003eThe slotted hex head accepts common drivers or nut drivers for quick tightening and removal. The smooth worm-gear action lets you dial in the correct diameter without jumping teeth or snagging the hose surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with flat-head screwdrivers, nut drivers, or socket tools.\u003c\/li\u003e\n  \u003cli\u003eUltimate torque rating up to 60 in·lbs so clamps stay put under load.\u003c\/li\u003e\n  \u003cli\u003eDesigned to minimize hose damage when tightened to recommended torque.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich applications are these clamps best for?\u003c\/h3\u003e\n\u003cp\u003eThese clamps suit a wide range of tasks: securing coolant or heater hoses in vehicles, fastening intake or fuel lines in farm equipment, clamping down marine hoses, and general household plumbing or repair projects. Their size and material make them versatile for both indoor and outdoor use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomotive hoses (radiator, heater, air intake) and small coolant lines.\u003c\/li\u003e\n  \u003cli\u003eAgricultural machinery hoses and irrigation lines.\u003c\/li\u003e\n  \u003cli\u003eMarine hose fittings and outdoor plumbing where rust resistance is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ROADFORMER 5\" stainless steel hose clamps are ideal for mechanics, boat owners, farmers, handypersons and facility maintenance teams who need reliable, corrosion-resistant clamps in a practical 10-pack. If you want durable, adjustable clamp hardware that resists weather and salt, and fits hoses roughly 116–140mm in circumference, this kit provides a robust, cost-effective solution with spare units for replacements or projects.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these clamps fit a 5-inch hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The clamps adjust from 116mm to 140mm (about 4.57–5.5\"), so they fit most hoses marketed as 5\" diameter by outer dimension.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these clamps suitable for saltwater use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Made from 300-series stainless steel for band, housing and screw, they resist corrosion in marine environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55167082725719,"sku":"B086MPNC3D","price":38.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging_d439eead-f4c2-42ac-aacd-8168ccc346d1.jpg?v=1790376731"},{"product_id":"roadformer-3-t-bolt-hose-clamp-81-89mm-2-pack-304-stainless-3-4-wide-band-for-even-non-damaging-sealing","title":"ROADFORMER 3\" T-Bolt Hose Clamp 81–89mm (2-Pack) — 304 Stainless, 3\/4\" Wide Band for Even, Non-Damaging Sealing","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 3-inch T-bolt hose clamp (81–89mm) is a heavy-duty 304 stainless steel clamp sold in a 2-pack, built to deliver even, reliable sealing for 3\" nominal ID hoses without cutting or damaging the hose material.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese clamps are engineered to fit hoses with a working range of 3.19\"–3.50\" (81–89mm) outer diameter and are especially suited for silicone, rubber, and reinforced coolant or intake hoses used in automotive, marine, and industrial systems. Constructed from corrosion-resistant 300-series stainless steel with a wide 3\/4\" band, a T-bolt fastener, floating bridge, and nylon-insert locknut, the ROADFORMER clamps balance clamping force and hose protection for long-term dependable connections.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps protect silicone and rubber hoses during installation?\u003c\/h3\u003e\n\n\u003cp\u003eThe ROADFORMER clamp uses a wide, smooth 3\/4\" stainless band and rounded edges that reduce bite into hose walls while the floating bridge spreads pressure evenly. That combination prevents localized pinching and helps preserve hose integrity under high-tension tightening. You get firm sealing without the sharp-edge damage common to narrower clamps.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e3\/4\" wide 304 stainless steel band with smooth, rounded edges\u003c\/li\u003e\n  \u003cli\u003eFloating bridge distributes clamping pressure evenly\u003c\/li\u003e\n  \u003cli\u003eNylon-insert locknut resists loosening from vibration\u003c\/li\u003e\n  \u003cli\u003eDesigned to fit hoses ~3mm–6mm wall thickness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size hoses will these 81–89mm clamps fit and how should I measure?\u003c\/h3\u003e\n\n\u003cp\u003eThe clamps suit 3\" nominal ID hoses with an outer diameter between 3.19\" and 3.50\" (81–89mm). To confirm fit, measure your hose outer diameter (O.D.) where the clamp will sit—do not measure inner diameter only. If your hose has a multi-layer or reinforced wall, include the full wall thickness in the O.D. measurement for accurate sizing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorking range: 81mm–89mm (3.19\"–3.50\")\u003c\/li\u003e\n  \u003cli\u003eRecommended for hoses with ~3mm–6mm wall thickness\u003c\/li\u003e\n  \u003cli\u003eMeasure hose O.D. at the clamp location for best results\u003c\/li\u003e\n  \u003cli\u003eDesigned for 3\" nominal I.D. silicone, rubber, and reinforced hoses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant is the construction?\u003c\/h3\u003e\n\n\u003cp\u003eAll load-bearing components are 300-series stainless steel, including the 1\/4\"-28 T-bolt, the band, and the bridge, offering strong resistance to rust and common automotive fluids. The stainless construction and nylon locknut combine to deliver long-term clamp tension retention and reliable performance in wet or salty environments where mild steel would quickly deteriorate.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e304 stainless steel band and 300-series T-bolt for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eNylon insert locknut reduces backing off from vibration\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty T-bolt design for secure, even clamping force\u003c\/li\u003e\n  \u003cli\u003eSuitable for marine, off-road, agricultural, and automotive use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these clamps easy to install and what tools do I need?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward: slide the clamp over the hose, position it on the connection, and tighten the T-bolt with a wrench or socket until the clamp compresses evenly. The floating bridge helps alignment, and the nylon locknut prevents loosening during normal operation. No special tools are required—common hand tools are sufficient for proper torqueing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSimple slide-on design—no special tools needed\u003c\/li\u003e\n  \u003cli\u003eTighten with a standard wrench or socket\u003c\/li\u003e\n  \u003cli\u003eFloating bridge simplifies alignment on flared fittings\u003c\/li\u003e\n  \u003cli\u003ePack contains two identical clamps for dual connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ROADFORMER 3\" T-bolt hose clamp 2-pack is intended for mechanics, DIY automotive enthusiasts, fleet maintenance crews, boat owners, and equipment operators who need rugged, corrosion-resistant clamps for turbo, intake, intercooler, radiator, coolant, and other hose connections. Choose this clamp when you need a heavy-duty, hose-friendly fastening solution that holds up in demanding environments and reduces the risk of hose damage while maintaining a reliable seal.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this clamp fit a 3\" silicone intake hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if the hose outer diameter measures between 81mm and 89mm (3.19\"–3.50\").\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the clamp corrosion resistant for marine use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the band and T-bolt use 300-series stainless steel for good rust resistance in wet conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55167192990039,"sku":"B0F4KF18PP","price":36.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging-clamp-pair.jpg?v=1790377886"},{"product_id":"roadformer-6-inch-t-bolt-hose-clamp-158-166mm-2-pack-304-stainless-heavy-duty-seal","title":"ROADFORMER 6-inch T-Bolt Hose Clamp 158–166mm (2-Pack) 304 Stainless, Heavy-Duty Seal","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 6-inch T-bolt hose clamp 2-pack: heavy-duty 304 stainless steel clamps sized for 158–166mm (6.22\"–6.54\") hose O.D. that deliver consistent, damage-resistant sealing for turbo, intercooler, radiator and coolant hose connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese ROADFORMER clamps are engineered to replace standard worm-drive clamps where a stronger, more even band pressure is required. Built from corrosion-resistant 304 stainless steel with a 1\/4\"-28 T-bolt and floating bridge, each clamp spreads clamping force uniformly to minimize leaks and avoid cutting into silicone or rubber hoses. The pair gives you two ready-to-install clamps sized for nominal 6\" inner-diameter hoses that measure between 158mm and 166mm outside diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size hose does this clamp fit and how do I measure?\u003c\/h3\u003e\n\u003cp\u003eThese clamps are intended for hoses with a nominal 6-inch inner diameter and an outside diameter range of 158–166mm (6.22\"–6.54\"). Measure the hose outside diameter (O.D.) at the place where the clamp will sit while the hose is fully assembled to ensure a correct match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking range: 158mm–166mm (6.22\"–6.54\")\u003c\/li\u003e\n  \u003cli\u003eDesigned for hose wall thickness roughly 3mm–6mm (SAE typical)\u003c\/li\u003e\n  \u003cli\u003eMeasure O.D. across the hose, not the I.D., for accurate fit\u003c\/li\u003e\n  \u003cli\u003eOrder only if measured O.D. falls inside the clamp range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant are these clamps?\u003c\/h3\u003e\n\u003cp\u003eThe clamps use a 3\/4\" wide band made of 304 stainless steel plus a 300-series stainless T-bolt and hardware for long-lasting corrosion resistance. Rounded band edges reduce the chance of cutting into flexible hoses, improving service life under vibration and thermal cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBand: 304 stainless steel for rust resistance\u003c\/li\u003e\n  \u003cli\u003eT-bolt and bridge: 300-series stainless steel hardware\u003c\/li\u003e\n  \u003cli\u003eRounded edges: protect silicone and rubber hose material\u003c\/li\u003e\n  \u003cli\u003eFloating bridge: shares and evens clamping pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these clamps provide a reliable seal for high-pressure or turbo applications?\u003c\/h3\u003e\n\u003cp\u003eThe heavy-duty T-bolt design gives firm, uniform pressure around the hose, making these clamps suitable for turbo, intercooler, radiator and coolant connections where a stronger seal is needed than what standard clamps provide. They are not a fix for improperly fitted hoses—correct hose sizing and proper installation are essential for optimal sealing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEven clamping reduces localized pinching and leaks\u003c\/li\u003e\n  \u003cli\u003eFloating bridge distributes pressure across the joint\u003c\/li\u003e\n  \u003cli\u003eIdeal for boosted intake, intercooler and coolant lines\u003c\/li\u003e\n  \u003cli\u003eRequires proper hose fit and torque for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy are these clamps to install and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: slide the clamp over the hose, position it at the connection shoulder, then tighten the T-bolt with a wrench or socket to the required snugness. The nylon-insert locknut helps maintain clamp tension in service, reducing the need for frequent retorquing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools: common wrench or socket fits 1\/4\"-28 T-bolt\u003c\/li\u003e\n  \u003cli\u003eQuick to position and tighten on-site\u003c\/li\u003e\n  \u003cli\u003eNylon locknut resists loosening from vibration\u003c\/li\u003e\n  \u003cli\u003eSold as a 2-pack for spares or paired connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These ROADFORMER T-bolt hose clamps suit mechanics, performance tuners, marine technicians and equipment operators who need a stronger, more protective clamp for 6\" hoses. They’re a good choice for anyone replacing aging clamps on turbochargers, intercoolers, radiators or industrial hose fittings who wants corrosion-resistant hardware and even sealing without damaging the hose material.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What exact diameter range do these clamps cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit hose outside diameters from 158mm to 166mm (6.22\"–6.54\"). Measure the hose O.D. where the clamp will sit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the clamps rust-resistant for marine use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The bands are 304 stainless steel and the T-bolt hardware is 300-series stainless for good corrosion resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55168272105815,"sku":"B0F4KC826F","price":41.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging-view.jpg?v=1790397570"},{"product_id":"roadformer-5-inch-304-stainless-steel-exhaust-band-clamps-4-pack-360-lap-joint-12-9-grade","title":"ROADFORMER 5-inch 304 Stainless Steel Exhaust Band Clamps, 4-Pack — 360° Lap-Joint, 12.9-Grade","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 5-inch 304 stainless steel lap-joint band clamps are heavy-duty exhaust connectors designed to seal overlapping 5\" OD into 5\" ID pipes for mufflers, elbows and flex sections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese four-pack exhaust band clamps combine a full 360° clamping profile with corrosion-resistant 304 stainless steel and hardened 12.9-grade fasteners to deliver a durable, leak-minimizing connection for automotive and commercial exhaust systems. Built to reduce distortion and protect pipe ends during tightening, they offer a fast, repeatable solution for repairs, upgrades, or new exhaust builds.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps create a reliable seal on overlapping exhaust joints?\u003c\/h3\u003e\n\n\u003cp\u003eThe ROADFORMER lap-joint design encircles the pipe fully, compressing the joint evenly to reduce gaps and prevent exhaust leakage without bending or crushing the tubing. The 360-degree band distributes force uniformly, while the hardened fasteners provide consistent torque and holding power.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFull 360° band contact prevents point-loading and deformation.\u003c\/li\u003e\n  \u003cli\u003e304 stainless steel resists corrosion for long-term sealing.\u003c\/li\u003e\n  \u003cli\u003e12.9-grade bolts deliver higher clamp force and consistent torque.\u003c\/li\u003e\n  \u003cli\u003eReaction block design protects pipe ends during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these clamps withstand road salt, heat, and outdoor exposure?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the clamps use 304 stainless steel and have undergone extensive salt-spray testing to ensure resistance to corrosion in harsh environments. The band also ships with a protective film to guard the surface during handling; remove it before final installation to expose the stainless finish.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOver 100 hours of salt-spray testing validates anti-corrosion performance.\u003c\/li\u003e\n  \u003cli\u003eStainless material tolerates high temperatures typical of exhaust systems.\u003c\/li\u003e\n  \u003cli\u003eProtective film prevents surface damage before fitting.\u003c\/li\u003e\n  \u003cli\u003eReaction block reduces localized wear when tightening near pipe edges.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow quick and accurate is the installation process?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward: position the overlapping 5\" OD into the 5\" ID pipe, place the band around the joint, and tighten the high-strength fasteners until the clamp seats evenly. The lap-joint configuration and reaction block help maintain alignment, making it easier to achieve a snug, leak-minimizing connection with minimal rework.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits standard 5\" OD into 5\" ID exhaust joints without modification.\u003c\/li\u003e\n  \u003cli\u003eLap-joint geometry simplifies alignment during assembly.\u003c\/li\u003e\n  \u003cli\u003eHigh-strength bolts accept repeatable torque for reliable clamping.\u003c\/li\u003e\n  \u003cli\u003eMinimizes need for shims, welds, or complicated fixtures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components and situations are these clamps best suited for?\u003c\/h3\u003e\n\n\u003cp\u003eROADFORMER 5\" lap-joint band clamps are intended for muffler inlets\/outlets, elbow joints, flex-pipe connections and other overlapping exhaust interfaces on cars, trucks, and commercial vehicles. They are a practical choice when you need a non-weld, serviceable connection that protects pipe ends and reduces noise and exhaust seepage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMuffler insets and outlets where pipes telescope together.\u003c\/li\u003e\n  \u003cli\u003eElbow and flex-pipe connections requiring vibration tolerance.\u003c\/li\u003e\n  \u003cli\u003eField repairs, replacements, and aftermarket exhaust installations.\u003c\/li\u003e\n  \u003cli\u003eCommercial and off-highway applications that demand durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Mechanics, DIY enthusiasts, fleet maintenance teams and fabricators who need a durable, easy-to-install 5\" exhaust clamping solution will value ROADFORMER's lap-joint band clamps. They fit standard overlapping 5\" tube assemblies and are engineered to resist corrosion, protect pipe ends during tightening, and deliver a repeatable seal without welding — useful for repairs, upgrades, and production exhaust work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these clamps fit a 5\" OD into a 5\" ID pipe?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are sized to join a 5\" OD pipe overlapping into a 5\" ID pipe for mufflers and exhaust joints.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Should I remove the protective film before installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Remove the film prior to final installation to expose the stainless finish and ensure optimal corrosion resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55168746848599,"sku":"B0BX9M7QGW","price":69.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-front-packaging-5-inch-clamp.jpg?v=1790413104"},{"product_id":"roadformer-3-inch-v-band-clamp-kit-4-pack-quick-release-304-stainless-flanges-for-turbo-exhaust","title":"ROADFORMER 3-inch V-Band Clamp Kit, 4-Pack — Quick-Release 304 Stainless Flanges for Turbo \u0026 Exhaust","description":"\u003cp\u003e\u003cstrong\u003eROADFORMER 3-inch V-band clamp kit is a four-pack quick-release stainless steel connection set that includes matched male and female flanges for precise, leak-resistant exhaust and turbo plumbing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a compact, service-friendly coupling for turbochargers, downpipes, mufflers, intercooler piping, or custom exhaust runs, this ROADFORMER kit provides repeatable alignment and fast disassembly without welding. Each set is sized for 3.00\" outside-diameter pipe and is built from 304 stainless components to withstand heat, vibration, and corrosive environments common to automotive and motorsport use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this V-band clamp speed up installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eThe quick-release V-band design lets you join or separate sections of piping using a single bolt and clamp, eliminating the need to cut, weld, or replace gaskets every time you service the system. It’s especially helpful where you need frequent access to turbo or downpipe flanges for inspection or swaps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle T-bolt clamp tightens the entire flange circumference at once\u003c\/li\u003e\n  \u003cli\u003eTool-friendly nut and bolt for fast removal and reassembly\u003c\/li\u003e\n  \u003cli\u003eEliminates repeated gasket replacement in service scenarios\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these flanges keep my connection centered and leak-free?\u003c\/h3\u003e\n\u003cp\u003eYes — each set includes matched male and female flanges that self-center when mated, producing even clamping pressure around the joint. The V-profile clamps pull the flanges together evenly, reducing the chance of exhaust leakage and movement under load or vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMale\/female mating surfaces promote precise concentric sealing\u003c\/li\u003e\n  \u003cli\u003eUniform pressure avoids point loading that causes leaks\u003c\/li\u003e\n  \u003cli\u003eWorks with rigid or slightly flexible 3\" OD piping for stable joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and quality features make this kit durable?\u003c\/h3\u003e\n\u003cp\u003eROADFORMER uses 304 stainless steel for the flanges and clamp body to resist corrosion and maintain strength at high exhaust temperatures. The kit also includes a silver-plated T-bolt and a self-locking nut designed for repeated cycles and secure clamping in harsh underbody environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e304 stainless flanges: corrosion and heat resistant\u003c\/li\u003e\n  \u003cli\u003ePolished, precision-machined flange faces for consistent sealing\u003c\/li\u003e\n  \u003cli\u003eSilver-plated bolt and self-locking nut for longevity and vibration resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow many connections are included and what applications are supported?\u003c\/h3\u003e\n\u003cp\u003eThe package contains four complete V-band assemblies — each assembly includes one V-band clamp, one male flange, and one female flange — giving you multiple joints for dual-exit exhausts or spare sets for fabrication. Common uses include turbocharger downpipe connections, intercooler piping, muffler interfaces, and custom exhaust sections where quick access or modular design is desired.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour complete sets for multiple joints or replacement spares\u003c\/li\u003e\n  \u003cli\u003eDesigned for 3.00\" outside-diameter pipes typical in performance systems\u003c\/li\u003e\n  \u003cli\u003eSuitable for turbo, exhaust, charge piping, and intercooler couplers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Enthusiasts, fabricators, and professional mechanics who build or service performance exhaust and forced-induction systems will value this ROADFORMER kit for its repeatable alignment, rapid serviceability, and corrosion-resistant materials. If you’re retrofitting a turbo setup, replacing worn flange connections, or designing modular exhaust runs that need fast disassembly and reliable sealing, this 3\" V-band clamp pack gives you a practical, durable solution without welding or complex hardware changes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this V-band kit compatible with 3-inch OD pipes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit is sized for a 3.00-inch outside-diameter pipe and includes matched male and female flanges.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I reuse the clamps after removing them frequently?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 304 stainless clamp and self-locking nut are made for repeated use and service cycles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADFORMER","offers":[{"title":"Default Title","offer_id":55171933765975,"sku":"B0F93CJFL9","price":100.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/roadformer-3in-vband-front-view.jpg?v=1790449853"}],"url":"https:\/\/britishgarage.co.uk\/collections\/roadformer.oembed","provider":"British Garage","version":"1.0","type":"link"}