{"title":"Termitor","description":"\u003cp\u003eBrowse 60 Termitor products at British Garage, including car bulbs, motorcycle \u0026amp; atv parts and headlights \u0026amp; tail light units. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked UK delivery on every order and 30-day returns.\u003c\/p\u003e","products":[{"product_id":"termitor-h11-9005-led-headlight-bulbs-combo-white-170-000lm-18x-brighter-canbus-ready","title":"Termitor H11 9005 LED Headlight Bulbs Combo — White 170,000LM, 18x Brighter, CANbus-Ready","description":"\u003cp\u003e\u003cstrong\u003eTermitor Latest H11 9005 LED Light Bulbs Combo delivers a high-output, compact replacement set engineered for a focused beam, long life, and broad vehicle compatibility.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Termitor H11\/9005 LED bulbs are designed as direct-fit upgrades for many headlight and fog lamp sockets, offering a dramatic increase in brightness while maintaining a near-stock physical profile. Built from aviation-grade aluminum with a powerful cooling system and a miniaturized driver, the combo aims to improve night visibility and reduce bulb-change frequency without compromising housing fit or causing glare for oncoming drivers.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter are these bulbs compared with factory halogens?\u003c\/h3\u003e\n\u003cp\u003eThe Termitor combo uses advanced LED chips to produce substantially more light than standard halogen units, widening both reach and side-to-side coverage. Rather than relying on oversized heat sinks or bulky drivers, this design concentrates light with a thin-chip array for a strong, consistent beam.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated up to 18x the brightness of typical stock halogens.\u003c\/li\u003e\n  \u003cli\u003e0.03-inch thin LEDs placed close together for a clean, concentrated beam.\u003c\/li\u003e\n  \u003cli\u003eClear cutoff to reduce glare and improve usable road illumination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs fit my vehicle and trigger dashboard errors?\u003c\/h3\u003e\n\u003cp\u003eTermitor engineered the H11 9005 combo with a 1:1 mini form factor to match most factory bulb footprints and avoid clearance issues inside lamp housings. An upgraded linear decoding IC and CANbus readiness reduce the chance of error codes, flickering, or interference on the majority of modern vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact, all-in-one housing designed to fit like original bulbs.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in intelligent driver and linear decoding for 98%+ compatibility.\u003c\/li\u003e\n  \u003cli\u003eSome sensitive systems may still need an external CANbus decoder.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these LEDs and how do they manage heat?\u003c\/h3\u003e\n\u003cp\u003eLongevity is addressed through a robust thermal architecture: aviation-grade aluminum body, an enlarged copper baseboard, and a high-speed 22,000 RPM cooling fan to pull heat away from the LEDs. The result is stable light output over thousands of hours and fewer replacements compared with halogen lamps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable aluminum construction for fast heat transfer.\u003c\/li\u003e\n  \u003cli\u003eLarge copper baseboard enhances thermal conductivity.\u003c\/li\u003e\n  \u003cli\u003eHigh-speed fan supports continuous operation beyond 85,000 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these bulbs road-legal and safe for oncoming traffic?\u003c\/h3\u003e\n\u003cp\u003eTermitor’s H11 9005 LED combo meets DOT requirements under FMVSS 108, providing a controlled beam pattern intended to improve visibility without undue glare. The optics are tuned to produce a defined cutoff line and consistent beam shape to minimize discomfort for drivers in opposing lanes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDOT-approved to FMVSS 108 standards (Test Report No: SiCT2509170943S).\u003c\/li\u003e\n  \u003cli\u003eOptimized beam pattern with a sharp cutoff line to reduce glare.\u003c\/li\u003e\n  \u003cli\u003eUniform light distribution prevents dark spots and shadows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: drivers who want a direct-fit, high-output LED replacement that balances intense forward illumination with compact packaging. Choose Termitor’s H11 9005 combo if you need a durable, DOT-compliant upgrade for improved night visibility, prefer a minimal installation changeover, and drive vehicles where space inside the lamp housing is limited. If your car is among the small minority with sensitive electronics, have a CANbus decoder ready to ensure error-free operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these Termitor bulbs require modifications to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No major modifications for most vehicles — the mini 1:1 design fits standard housings; some models may need a CANbus decoder.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long do Termitor H11 9005 LEDs last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Designed for extended use, the bulbs have a rated life exceeding 85,000 hours with active cooling.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55161231868247,"sku":"B0GXKC6XCK","price":124.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-view-packaging.jpg?v=1790322697"},{"product_id":"termitor-d5s-led-bulbs-6500k-pack-of-2-90-000lm-output-ip68-weatherproof-oem-1-1-fit","title":"Termitor D5S LED Bulbs 6500K Pack of 2 — 90,000LM Output, IP68 Weatherproof, OEM 1:1 Fit","description":"\u003cp\u003e\u003cstrong\u003eTermitor D5S bulbs are high-output, OEM-sized 6500K replacement lights engineered for quick 3-minute installation, durable IP68 weather protection, and powerful 90,000-lumen visibility for fog and rough-terrain driving.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUpgrade your vehicle's auxiliary or fog lighting with a pair of Termitor D5S bulbs designed to match factory dimensions while delivering a crisp daylight color temperature and extreme brightness. These bulbs aim to blend easy fitment and long-lasting performance, using an optical layout that balances intense output with controlled beam shape so you get more usable light without excessive scatter.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these bulbs and what color do they produce?\u003c\/h3\u003e\n\u003cp\u003eTermitor D5S bulbs put out very high lumen levels at a clean 6500K daylight white. The color is on the cool end of the spectrum for clearer contrast and perceived sharpness, which many drivers prefer for visibility in low-light or foggy conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated output: 90,000 LM (pair brightness optimized for beam control)\u003c\/li\u003e\n  \u003cli\u003eColor temperature: 6500K daylight white for improved contrast\u003c\/li\u003e\n  \u003cli\u003eOptical design focuses light into a defined pattern to reduce glare\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my car and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eTermitor engineered the D5S bulbs to match OEM D5S dimensions for a 1:1 fit in nearly all compatible housings. The plug-and-play design supports a fast swap without modifications, typically completed in minutes with standard access to the headlamp or fog lamp assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory-size 1:1 housing for broad vehicle compatibility\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play electrical connector supports 3-minute setup\u003c\/li\u003e\n  \u003cli\u003eDesigned for direct replacement—no adapters or heat shields required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant are these bulbs?\u003c\/h3\u003e\n\u003cp\u003eBuilt for demanding conditions, Termitor D5S bulbs include robust thermal management and an IP68 rating to keep moisture and dust out. The construction focuses on consistent output over time, so frequent drivers and off-road users get reliable illumination across seasons.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP68 ingress protection for immersion and dust resistance\u003c\/li\u003e\n  \u003cli\u003eEfficient heat dissipation to extend service life\u003c\/li\u003e\n  \u003cli\u003eRugged materials and secure sealing for rough-terrain use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat specific driving situations do these bulbs improve?\u003c\/h3\u003e\n\u003cp\u003eThese D5S bulbs are tailored to enhance visibility where contrast and forward reach matter most—fog, wet roads, and unlit backroads. Their balanced beam pattern is intended to reveal more road detail while helping you spot obstacles earlier.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBetter short- to mid-range visibility for fog and rain\u003c\/li\u003e\n  \u003cli\u003eEnhanced roadside clarity on unlit highways and trails\u003c\/li\u003e\n  \u003cli\u003eUseful as fog light upgrades or supplemental driving lamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who want a direct-fit, high-intensity light upgrade without complex wiring or housing changes—especially those who frequently drive in foggy, wet, or unlit environments. The Termitor D5S pair suits owners seeking brighter, cooler-toned illumination, a robust IP68-rated build for all-weather use, and a simple installation process that restores or improves factory light output.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do Termitor D5S bulbs require any adapters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—these D5S bulbs are 1:1 factory-size replacements designed for plug-and-play installation without adapters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are they safe to use in wet conditions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—Termitor D5S bulbs are IP68-rated for protection against dust and temporary immersion, suitable for wet environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55161235243351,"sku":"B0GM5V3S4H","price":123.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-packaging.jpg?v=1790322815"},{"product_id":"termitor-h1-hid-bulbs-new-gen-6500k-cool-white-pack-of-2-150-000lm-ip68-waterproof","title":"Termitor H1 HID Bulbs New-Gen 6500K Cool White, Pack of 2 — 150,000LM, IP68 Waterproof","description":"\u003cp\u003e\u003cstrong\u003eTermitor New-Gen H1 bulbs are compact, high-output H1 HID replacements that deliver ultra-bright 6500K cool white illumination with IP68 waterproofing and plug-and-play installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese H1 HID bulbs are engineered to upgrade halogen systems without bulky external ballast boxes. They combine a small 1:1 halogen-mini footprint with a built-in driver and a high-speed thermal system to produce intense, focused light suitable for off-road vehicles, ATVs, and many passenger cars. The kit comes as a pair and aims to balance powerful long-range visibility, reliable heat control, and broad vehicle compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these H1 HID bulbs and what color do they produce?\u003c\/h3\u003e\n\n\u003cp\u003eTermitor's New-Gen H1 bulbs push very high light output with a cool white color temperature designed for contrast and road detail. The bulbs are specified to provide up to 150,000 lumens combined output and a crisp 6500K color that simulates daylight for clearer nighttime perception.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 150,000 lumens total output for the pair.\u003c\/li\u003e\n  \u003cli\u003e6500K cool white to improve edge and object contrast.\u003c\/li\u003e\n  \u003cli\u003eRated as a large percentage brighter than standard halogen for earlier obstacle detection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my existing H1 halogen sockets and how hard is installation?\u003c\/h3\u003e\n\n\u003cp\u003eThe bulbs are designed in a 1:1 halogen-mini form factor so they fit most H1 housings without modification. A built-in driver removes the need for external ballast boxes or adapters, making installation simple for most vehicles.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1:1 halogen-mini size for direct fit into tight housings.\u003c\/li\u003e\n  \u003cli\u003eIntegrated driver — plug \u0026amp; play with no extra adapters required.\u003c\/li\u003e\n  \u003cli\u003ePack of two for simultaneous replacement of both headlamps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these bulbs manage heat and longevity?\u003c\/h3\u003e\n\n\u003cp\u003eTermitor combines aviation-grade aluminum, a thermostatic copper plate, and a 22,000 RPM cooling fan into a compact thermal package to dissipate heat quickly. That thermal control keeps light output stable and helps extend the LED system life for long-term use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty aviation-grade aluminum housing for heat conduction.\u003c\/li\u003e\n  \u003cli\u003eThermostatic copper plate and high-speed fan for active cooling.\u003c\/li\u003e\n  \u003cli\u003eRated up to approximately 85,000 operational hours under normal conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these bulbs suitable for off-road and wet conditions?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the assembly is sealed to an IP68 rating, protecting electronics from dust, mud, and sustained water exposure. That makes the bulbs well suited for ATVs, off-road rigs, and harsh-weather driving where water and debris are common.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIP68 waterproofing for high-resilience in wet or muddy environments.\u003c\/li\u003e\n  \u003cli\u003eCompact sealed design reduces corrosion and ingress risk.\u003c\/li\u003e\n  \u003cli\u003eRecommended for off-road and all-weather applications when paired with compatible housings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Termitor New-Gen H1 HID bulbs are aimed at drivers who want a dramatic brightness upgrade from halogen without bulky ballasts — especially off-road enthusiasts, ATV owners, and motorists needing high-contrast, long-range illumination. They are best for vehicles that accept H1 bulbs and for buyers who prefer a plug-and-play swap with robust sealing and active cooling. If your vehicle is sensitive to aftermarket electronics, Termitor offers decoder support to resolve flicker or dashboard warnings.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these H1 bulbs need an external ballast or adapter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — Termitor New-Gen H1 bulbs include a built-in driver for true plug-and-play installation without extra ballasts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the bulbs work in wet or muddy off-road conditions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the units are IP68 rated, which protects them from dust and prolonged water exposure in off-road environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55161314476375,"sku":"B0DC6G2C8K","price":90.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-packaging-h1-pair.jpg?v=1790324632"},{"product_id":"termitor-h11-9005-led-headlight-bulbs-pack-of-4-6500k-daylight-180-000lm-true-1-1-halogen-size-plug-play","title":"Termitor H11\/9005 LED Headlight Bulbs Pack of 4 — 6500K Daylight, 180,000LM, True 1:1 Halogen Size, Plug \u0026 Play","description":"\u003cp\u003e\u003cstrong\u003eTermitor H11 9005 LED Bulbs Combo delivers ultra‑bright 6500K daylight illumination in a true 1:1 halogen size for fast plug‑and‑play upgrades.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese LED replacement bulbs are engineered to give drivers a brighter, more focused beam without changing housings or adding extra wiring. The combo pack of four fits factory sockets and keeps error codes in check with CANbus‑ready circuitry. Built with active cooling and waterproof protection, the bulbs are intended for regular road use as well as demanding environments where vibration and moisture are concerns.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these bulbs improve nighttime visibility?\u003c\/h3\u003e\n\u003cp\u003eThe Termitor LEDs produce a high lumen output and a crisp 6500K color that makes road details, signs, and obstacles easier to see compared with dimmer halogen lamps. The optical design concentrates light lower and farther down the road to reduce distracting glare for oncoming drivers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e180,000LM combined output for brighter road illumination\u003c\/li\u003e\n  \u003cli\u003e6500K daylight color to enhance contrast and sign readability\u003c\/li\u003e\n  \u003cli\u003eEngineered beam pattern to limit upward scatter and glare\u003c\/li\u003e\n  \u003cli\u003eStable output across wet or foggy conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and how simple is installation?\u003c\/h3\u003e\n\u003cp\u003eTermitor bulbs are manufactured in the same physical dimensions as halogen H11 and 9005 bases, so they seat directly into compatible housings without adapters. The plug‑and‑play connectors match factory wiring, and the CANbus‑ready electronics reduce dashboard errors on most modern vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrue 1:1 halogen size means no housing modifications\u003c\/li\u003e\n  \u003cli\u003eFactory‑style base and connector for quick replacement\u003c\/li\u003e\n  \u003cli\u003eCANbus‑ready circuitry minimizes flicker and error messages\u003c\/li\u003e\n  \u003cli\u003eInstallable in minutes with no special tools required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the cooling and durability system work?\u003c\/h3\u003e\n\u003cp\u003eIntegrated fans and aerospace‑grade components help manage heat and maintain consistent light output over long service life. Rugged construction and shock resistance make the bulbs suitable for daily driving, highway miles, and light off‑road use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt‑in active cooling fan for thermal regulation\u003c\/li\u003e\n  \u003cli\u003eMaterials designed for vibration and impact resistance\u003c\/li\u003e\n  \u003cli\u003eIP68 waterproof rating to withstand water exposure\u003c\/li\u003e\n  \u003cli\u003eExpected long service hours with reduced lumen drop\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there compatibility or legal considerations I should know?\u003c\/h3\u003e\n\u003cp\u003eWhile these bulbs are designed to fit over 99% of vehicles with H11 or 9005 sockets, confirm the bulb type and local regulations before purchase. Some jurisdictions restrict aftermarket headlight colors and beam patterns, so check local vehicle lighting laws to ensure compliance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for most SUVs, cars, trucks, ATVs, and UTVs\u003c\/li\u003e\n  \u003cli\u003eVerify socket type (H11 or 9005) before ordering\u003c\/li\u003e\n  \u003cli\u003eCheck local lighting regulations regarding color and output\u003c\/li\u003e\n  \u003cli\u003eMay require alignment adjustments in some assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Termitor H11 9005 LED Bulbs Combo is aimed at drivers who want a straightforward upgrade from halogen to brighter, whiter light without complex installation. It suits daily commuters, night drivers, and owners of SUVs or light off‑road vehicles who need improved down‑road visibility and durable, weather‑resistant performance in a factory‑fit package.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these bulbs fit my H11 or 9005 sockets?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they are true 1:1 halogen size designed to fit H11 and 9005 sockets without adapters in most vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will they cause dashboard errors or flickering?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They include CANbus‑ready circuitry to reduce flicker and error codes on most modern vehicles, though a few models may still require resistors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55161320931671,"sku":"B0G1M1F84B","price":135.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-packaging_d6ef4dba-1a30-4e01-a83f-ce1293be2351.jpg?v=1790324681"},{"product_id":"termitor-d3s-led-headlight-bulbs-80-000lm-6500k-daylight-1-1-fit-pack-of-2-ip68-waterproof","title":"Termitor D3S LED Headlight Bulbs 80,000LM 6500K Daylight — 1:1 Fit, Pack of 2, IP68 Waterproof","description":"\u003cp\u003e\u003cstrong\u003eTermitor D3S LED bulbs deliver instant, ultra‑bright 80,000 lumen, 6500K daylight illumination in a direct 1:1 fit without adapters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese bulbs are built to replace factory D3S lamps for off‑road and performance vehicles, offering a crisp daylight color temperature and a no‑hassle installation. With an IP68 rating and a thermal design that extends runtime, they aim to provide a durable, high‑output alternative to stock halogen or HID units. The plug‑and‑play connector works with most modern electrical systems so you can swap them in quickly and get back on the trail or road.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these bulbs and what does the 6500K color look like?\u003c\/h3\u003e\n\u003cp\u003eThe Termitor D3S bulbs produce a very high luminous output rated at 80,000 lumens and a color temperature close to natural daylight (6500K), which improves contrast for reading road surfaces and obstacles. The cooler white light helps reveal edges and textures more clearly than warmer bulbs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e80,000LM peak intensity for long-range visibility\u003c\/li\u003e\n  \u003cli\u003e6500K daylight white for higher contrast and true color rendering\u003c\/li\u003e\n  \u003cli\u003eWide beam pattern to illuminate road sides and hazards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these work with my vehicle without extra parts or warnings?\u003c\/h3\u003e\n\u003cp\u003eTermitor engineered the D3S to be compatible with over 99% of modern vehicle electronics, including CANbus systems, so most installs do not require resistors or external decoders. The built‑in driver manages current and prevents flicker or error codes on compatible vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated intelligent driver for error‑free operation\u003c\/li\u003e\n  \u003cli\u003eNo adapter or external ballast required for most cars and trucks\u003c\/li\u003e\n  \u003cli\u003eDesigned to avoid dashboard errors and radio interference\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these bulbs for off‑road and all‑weather use?\u003c\/h3\u003e\n\u003cp\u003eConstructed with aviation‑grade aluminum and an advanced heat sink, the D3S bulbs are made to dissipate heat efficiently and withstand heavy use. The IP68 waterproof rating protects against water and dust ingress so they remain reliable in rain, snow, or muddy conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust thermal management for long service life (75,000+ hours)\u003c\/li\u003e\n  \u003cli\u003eIP68 certification for dust and water resistance\u003c\/li\u003e\n  \u003cli\u003eCorrosion‑resistant housing built for rough environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is the installation and which vehicles are they intended for?\u003c\/h3\u003e\n\u003cp\u003eThese bulbs are a direct 1:1 size replacement designed to fit factory D3S housings, making installation fast and tool‑free in most cases. The plug‑and‑play connector allows a secure fit without cutting wires; always verify your vehicle's bulb type before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect 1:1 form factor to match factory fittings\u003c\/li\u003e\n  \u003cli\u003ePlug‑and‑play wiring—no splicing or extra adapters required\u003c\/li\u003e\n  \u003cli\u003eOptimized for off‑road vehicles: ATVs, UTVs, SUVs, trucks, and passenger cars with D3S sockets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Termitor D3S pair is aimed at drivers and riders who demand stronger, whiter light than stock lamps—especially off‑road enthusiasts, fleet owners, and anyone who needs dependable illumination in adverse weather. If you want a long‑lasting, high‑output bulb that fits factory housings and minimizes electrical headaches, this pack offers a practical upgrade. Always confirm D3S compatibility with your vehicle model before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do Termitor D3S bulbs require an external ballast or adapter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, these D3S bulbs have an internal driver and are designed for plug‑and‑play use without extra ballasts for most vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long do the Termitor D3S bulbs last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are rated for over 75,000 hours thanks to a robust thermal design and aviation‑grade materials.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55161322602839,"sku":"B0H3RC1YDM","price":102.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-d3s-front-view.jpg?v=1790324729"},{"product_id":"termitor-d1s-hid-headlight-bulbs-6000k-cool-white-35w-high-output-ip68-metal-base","title":"Termitor D1S HID Headlight Bulbs 6000K Cool White — 35W High-Output, IP68 Metal Base","description":"\u003cstrong\u003eTermitor D1S HID Headlight Bulbs are direct-fit D1S xenon replacements that deliver crisp 6000K cool-white light with dramatically higher output than halogen.\u003c\/strong\u003e\n\n\u003cp\u003eIf you need a direct-replacement HID option that restores factory-style xenon performance while boosting visible brightness, these Termitor D1S bulbs are engineered for that purpose. They are built to fit vehicles that originally used D1S bulbs, offering a plug-and-play installation with an IP68-rated metal base for durability in wet or dusty conditions.\u003c\/p\u003e\n\n\u003ch3\u003eWhat makes Termitor D1S bulbs brighter than my existing lights?\u003c\/h3\u003e\n\u003cp\u003eThese D1S bulbs use a 35W xenon arc design optimized to increase luminous output compared with halogen units. The bulbs produce a crisp 6000K cool-white beam intended to improve contrast and road detail at night while matching OEM HID color temperature.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated light temperature: 6000K cool white for clearer road perception\u003c\/li\u003e\n  \u003cli\u003eHigh output design delivering dramatically more visible light than halogen\u003c\/li\u003e\n  \u003cli\u003eFactory-style xenon arc that follows OEM beam characteristics\u003c\/li\u003e\n  \u003cli\u003eNote: HID bulbs require a few seconds to reach full brightness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these D1S bulbs work in my car and install without modifications?\u003c\/h3\u003e\n\u003cp\u003eTermitor D1S bulbs are manufactured to match OEM D1S sockets and electrical interfaces for a true direct-replacement experience. In most compatible vehicles they are plug-and-play and do not need extra wiring or adapters; contacting the seller to confirm fitment is recommended if you have doubts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for D1S headlight assemblies only\u003c\/li\u003e\n  \u003cli\u003eNo additional wiring or ballasts required when replacing OEM D1S components\u003c\/li\u003e\n  \u003cli\u003eEngineered to avoid dashboard error codes on compatible systems\u003c\/li\u003e\n  \u003cli\u003eCustomer support available to verify vehicle compatibility before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these bulbs for real-world driving conditions?\u003c\/h3\u003e\n\u003cp\u003eTermitor builds the D1S bulbs with a robust metal base and seals rated to IP68 for water and dust resistance, so they hold up to rain, snow, and road spray. The xenon design consumes 35W and is specified for longer operational life than typical halogen lamps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP68 waterproof rating for reliability in wet environments\u003c\/li\u003e\n  \u003cli\u003eSturdy metal base for vibration resistance and stable mounting\u003c\/li\u003e\n  \u003cli\u003eExpected service life several times longer than standard halogen bulbs\u003c\/li\u003e\n  \u003cli\u003eConsistent light output across temperature extremes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will these bulbs change night driving and maintenance?\u003c\/h3\u003e\n\u003cp\u003eUpgrading to Termitor D1S bulbs delivers a cooler white beam and much higher light output, which can improve visual clarity and reduce the need for frequent replacements compared to halogen. Because they match OEM D1S specs, maintenance is typically limited to periodic alignment checks and ensuring the headlight housing remains sealed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6000K color temperature offers neutral white illumination for clearer detail\u003c\/li\u003e\n  \u003cli\u003eHigher longevity reduces bulb-change frequency versus halogen\u003c\/li\u003e\n  \u003cli\u003eInstall in minutes without altering factory housings in compatible cars\u003c\/li\u003e\n  \u003cli\u003eHID bulbs warm up briefly before reaching maximum brightness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These Termitor D1S HID bulbs are intended for drivers whose vehicles originally use D1S xenon bulbs and who want a reliable, brighter 6000K cool-white replacement that mounts to factory sockets. They are ideal for owners seeking OEM-style HID performance with improved durability and output—do not purchase if your car uses halogen or LED headlight assemblies without D1S sockets. If you are unsure about compatibility, reach out to Termitor support with your vehicle details before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are Termitor D1S bulbs compatible with halogen or LED assemblies?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These bulbs are designed specifically for D1S HID assemblies and will not fit halogen or most LED housings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do Termitor D1S bulbs require extra ballasts or wiring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No additional wiring is typically needed for vehicles originally equipped with D1S—these are direct-fit replacements.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55166400692567,"sku":"B0F26GJS6T","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-d1s-front-view.jpg?v=1790367975"},{"product_id":"termitor-h4-9003-hb2-motorcycle-led-headlight-bulb-6500k-xenon-white-1-1-halogen-fit-plug-and-play","title":"Termitor H4\/9003 HB2 Motorcycle LED Headlight Bulb, 6500K Xenon White — 1:1 Halogen Fit, Plug-and-Play","description":"\u003cp\u003e\u003cstrong\u003eThe Termitor H4\/9003\/HB2 is a plug-and-play motorcycle headlight bulb that produces bright 6500K xenon-white hi\/lo light with a compact 1:1 halogen footprint for direct replacement.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you ride at night or in low-visibility conditions, upgrading to a high-output bulb helps you see farther and makes your bike more visible to others. The Termitor H4\/9003\/HB2 is built to match original halogen dimensions so it fits most stock housings, while delivering a significantly brighter xenon-white beam and a precise cut-off for hi\/low operation. It comes as a single bulb in a simple plug-and-play package—no external ballast or complicated wiring needed.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter is this bulb compared to standard halogen units?\u003c\/h3\u003e\n\u003cp\u003eThe Termitor H4\/9003\/HB2 claims up to 800% higher light output than typical halogen bulbs, using upgraded high-efficiency chips to increase lumen delivery and produce a 6500K xenon-white color. This higher output improves peripheral and distance illumination without changing your housing optics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6500K color temperature for crisp, daylight-like white light\u003c\/li\u003e\n  \u003cli\u003eUpgraded LED chips designed for higher lumen output\u003c\/li\u003e\n  \u003cli\u003eEngineered beam focus to maximize usable roadway illumination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this bulb fit my motorcycle and require housing changes?\u003c\/h3\u003e\n\u003cp\u003eThe bulb is designed in a true 1:1 mini halogen footprint to match the physical size and light source position of original halogen H4\/9003\/HB2 bulbs. That means most factory dust caps, bezels, and tight housings accept it without trimming or adapters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact halogen-sized form factor for easy replacement\u003c\/li\u003e\n  \u003cli\u003eMaintains correct filament-to-lens alignment for proper beam pattern\u003c\/li\u003e\n  \u003cli\u003eCompact design avoids interference with dust covers and mounting tabs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo I need extra wiring, ballasts, or polarity adjustments to install it?\u003c\/h3\u003e\n\u003cp\u003eNo additional drivers, ballasts, or polarity checks are required; the Termitor H4\/9003\/HB2 is a true plug-and-play unit built for direct connection to factory sockets. The non-polarity design and standard connector mean you can replace your bulb in minutes with basic hand tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect plug into the stock H4\/9003 socket with no harnesses\u003c\/li\u003e\n  \u003cli\u003eNon-polarity electronics eliminate orientation concerns\u003c\/li\u003e\n  \u003cli\u003eQuick swap installation—remove old bulb, plug in Termitor, secure dust cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the bulb manage heat and longevity?\u003c\/h3\u003e\n\u003cp\u003eTermitor uses an all-aluminum body and optimized thermal paths to pull heat away from the LEDs, helping to reduce light decay and maintain consistent output. The cooling design and quality components target a long operating life while keeping thermal stress low in compact motorcycle housings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum construction provides efficient heat dissipation\u003c\/li\u003e\n  \u003cli\u003eThermal management supports stable brightness over time\u003c\/li\u003e\n  \u003cli\u003eEstimated long service life for fewer replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Termitor H4\/9003\/HB2 is suited for motorcyclists who want a high-visibility, xenon-white upgrade without modifying their headlight assembly. It's ideal for riders using stock housings that need a brighter, correctly aligned hi\/low beam, commuters who frequently ride at night, and technicians seeking a straightforward, quick-install replacement. Avoid sellers’ overpromises: check local laws for bulb color and brightness regulations before purchase to ensure compliance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this bulb compatible with my H4\/9003 motorcycle headlight?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—it's built to a true 1:1 H4\/9003\/HB2 footprint so it fits most stock housings without modifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does installation require extra wiring or a ballast?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the Termitor H4 is plug-and-play with a non-polarity design—no ballast or wiring changes needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55167628312919,"sku":"B0G52B9N3L","price":46.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-packaging-bulb.jpg?v=1790389877"},{"product_id":"termitor-9005-led-headlight-bulbs-pack-of-2-6500k-cool-white-1-1-mini-size-ip68-waterproof-high-lumen","title":"Termitor 9005 LED Headlight Bulbs Pack of 2 — 6500K Cool White, 1:1 Mini Size, IP68 Waterproof, High-Lumen","description":"\u003cp\u003e\u003cstrong\u003eTermitor 9005 LED bulbs are high-output, plug-and-play headlight replacements that deliver a cool 6500K daylight-white beam in a compact 1:1 halogen-sized package.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese latest-generation 9005\/HB3 LED bulbs are engineered to provide dramatically brighter, cooler illumination while fitting directly into most factory headlamp housings. With an aerospace-grade aluminum body, turbo cooling fan, and IP68 weather resistance, they aim to combine intense light output with reliable thermal and environmental protection for long-term on-road use.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these bulbs compared with standard halogen lamps?\u003c\/h3\u003e\n\u003cp\u003eTermitor 9005 LEDs use 16 high-performance chips to produce a much stronger beam than typical halogen bulbs, designed to improve visibility and contrast at night. The light is specified at a high lumen rating and uses a 6500K color temperature for a crisp, daylight-like appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated output emphasizing high lumen performance for clearer road recognition.\u003c\/li\u003e\n  \u003cli\u003e6500K cool white color for improved contrast against road signs and markings.\u003c\/li\u003e\n  \u003cli\u003eMulti-chip array to provide a broad, even beam pattern when fitted in compatible housings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs fit my vehicle and install easily?\u003c\/h3\u003e\n\u003cp\u003eTermitor designed the bulbs with a real 1:1 mini size so they fit many factory housings and sockets without adapters. The integrated driver and non-polarity wiring make installation largely plug-and-play, typically completed in minutes for compatible vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact halogen-matching housing for direct replacement of 9005\/HB3 bulbs.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in driver reduces the need for external components or adapters.\u003c\/li\u003e\n  \u003cli\u003eMost vehicles are supported, though sensitive systems may require a decoder or confirmation of fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Termitor manage heat and durability for long service life?\u003c\/h3\u003e\n\u003cp\u003eThermal control is handled with an aerospace-grade aluminum body, hollow-carved heat pathways, and a high-speed turbo cooling fan to pull heat away from the LED chips. Combined with IP68 sealing and anti-aging rubber gaskets, the design targets extended operational life even in wet or dusty conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHollow-carved aluminum heat sink plus 22,000 RPM turbo fan for active cooling.\u003c\/li\u003e\n  \u003cli\u003eIP68 waterproof and dustproof rating for performance in adverse weather.\u003c\/li\u003e\n  \u003cli\u003eAnti-aging seals and robust materials intended to reduce degradation over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical compatibility and reliability features should I expect?\u003c\/h3\u003e\n\u003cp\u003eThese bulbs include an advanced built-in driver to reduce flicker and minimize error codes for more than 99% of vehicle electrical systems. While designed for broad compatibility, checking your owner’s manual or existing bulb size is recommended, and certain sensitive systems might still need a CANbus decoder.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated driver to support most modern vehicle electrical systems.\u003c\/li\u003e\n  \u003cli\u003eNon-polarity wiring decreases installation errors and simplifies plug-and-play use.\u003c\/li\u003e\n  \u003cli\u003eFor a small subset of vehicles, an external decoder may be required to prevent dashboard errors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: drivers who want a simple headlight upgrade that increases on-road brightness and clarity without modifying the stock housing. These bulbs suit vehicle owners seeking a compact 1:1 form factor, strong cooling and weather resistance, and broad electrical compatibility. Confirm your vehicle’s bulb size and, for sensitive electronic systems, be prepared to add a decoder if needed.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these 9005 bulbs require additional adapters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No adapters are usually needed thanks to the 1:1 halogen-size design and built-in driver, though some vehicles may need a decoder.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the bulbs waterproof for heavy rain or snow?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the Termitor 9005 LEDs carry an IP68 rating and use anti-aging seals for reliable wet-weather performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55167893078359,"sku":"B0GMH3SWL2","price":46.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-9005-front-view.jpg?v=1790395437"},{"product_id":"termitor-h7-led-bulb-6500k-1-1-mini-size-pack-of-2-can-bus-ready-fan-cooled-high-output","title":"Termitor H7 LED Bulb 6500K 1:1 Mini Size Pack of 2 — CAN-bus Ready, Fan-Cooled High-Output","description":"\u003cp\u003e\u003cstrong\u003eTermitor 2026 Upgraded H7 LED bulbs deliver a 6500K, ultra-focused beam with up to 900% brighter output than many stock H7 bulbs while remaining a 1:1 mini-size, CAN-bus compatible plug-and-play replacement.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a direct, high-performance substitute for factory H7 lamps, these Termitor bulbs combine compact dimensions with advanced optics, a high-speed cooling fan and aerospace-grade materials to extend lifespan and maintain steady light output. They aim to improve nighttime visibility and beam clarity without modifying housings or sacrificing compatibility with modern vehicle electronics.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this bulb improve nighttime visibility?\u003c\/h3\u003e\n\u003cp\u003eThe Termitor H7 uses an ultra-thin 0.03-inch chip pitch and precision optics to produce a concentrated, shadow-free beam pattern. That focused output reduces scattered light and glare while projecting farther and wider than many standard halogen H7s.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6500K crisp white color for clearer road detail\u003c\/li\u003e\n  \u003cli\u003e80,000 lumens peak output specification for stronger illumination\u003c\/li\u003e\n  \u003cli\u003eEngineered beam pattern to minimize dark zones and glare\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs fit my car and avoid dashboard errors?\u003c\/h3\u003e\n\u003cp\u003eTermitor engineered the H7 bulbs with a 1:1 mini-size profile and a non-polarity plug for straightforward installation into original H7 sockets. An upgraded linear decoding IC and CAN-bus compatibility address error messages and DRL flicker on more than 99% of vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAuthentic 1:1 sizing for lens and housing compatibility\u003c\/li\u003e\n  \u003cli\u003eIntegrated smart IC for CAN-bus protocol support\u003c\/li\u003e\n  \u003cli\u003eDecoder support available from Termitor for rare ECU conflicts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is heat handled to ensure long life and stable output?\u003c\/h3\u003e\n\u003cp\u003eThermal management uses aerospace-grade aluminum, copper heat pipes and a 15,000 RPM cooling fan to dissipate heat quickly and keep LED junctions stable. Efficient cooling helps the bulbs sustain performance well beyond typical halogen lifespans and reduces the need for frequent replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCopper tube heat pipes plus aluminum alloy body for fast heat transfer\u003c\/li\u003e\n  \u003cli\u003eHigh-speed brushless fan to maintain safe operating temperature\u003c\/li\u003e\n  \u003cli\u003eEstimated continuous operation exceeding 60,000 hours under normal conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these bulbs safe and legally approved?\u003c\/h3\u003e\n\u003cp\u003eTermitor states DOT approval for this H7 product model, produced under FMVSS No.108 compliance guidance for headlamps. While DOT marks indicate compliance for on-road use in the U.S., always verify local regulations and correct aiming before driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured to meet FMVSS No.108-related approval\u003c\/li\u003e\n  \u003cli\u003eDesigned to reduce glare through precise beam focus\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play installation preserves original aiming and housing geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers who want a brighter, whiter H7 solution without modifying stock housings will appreciate the Termitor 2026 H7 kit. It’s aimed at owners seeking a compact, high-output LED that addresses modern vehicle electronics, offers durable thermal design, and keeps installation simple—suitable for commuters, night-shift drivers, and anyone wanting clearer road illumination while retaining factory fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these bulbs fit standard H7 sockets?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They use a true 1:1 mini-size design and non-polarity plug for direct replacement in standard H7 housings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will my car show a dashboard error with these LEDs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most vehicles (99%+) are compatible thanks to the integrated decoding IC and CAN-bus support; contact Termitor for a decoder if needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55168223543639,"sku":"B0GJSYD5FJ","price":46.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-h7-front-packaging.jpg?v=1790396753"},{"product_id":"termitor-d3s-hid-bulbs-6000k-pack-of-2-35w-xenon-ip68-waterproof-800-ultra-bright","title":"Termitor D3S HID Bulbs 6000K Pack of 2 — 35W Xenon, IP68 Waterproof, 800% Ultra-Bright","description":"\u003cp\u003e\u003cstrong\u003eTermitor 2026 D3S HID Bulbs are high-output 35W replacement xenon lamps that deliver an 800% brightness boost at a crisp 6000K color temperature for D3S headlight housings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese bulbs are engineered as direct-fit replacements for factory D3S xenon assemblies, offering faster start-up and longer life than many stock units. They are specifically made to work in vehicles that use D3S HID modules (not compatible with halogen or LED housings). With IP68 waterproofing and an advertised six-year service life, the set of two aims to improve nighttime visibility while matching factory fitment and electrical behavior.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter are these Termitor D3S bulbs compared with standard xenon lights?\u003c\/h3\u003e\n\n\u003cp\u003eTermitor markets this model as providing up to an 800% increase in perceived brightness, achieved by higher light output and a 6000K cool-white color. The higher lumen output helps illuminate road signs and peripheral areas more clearly than aging factory bulbs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6000K cool-white tone for clearer contrast at night\u003c\/li\u003e\n  \u003cli\u003eHigher lumen output compared with worn OEM xenon bulbs\u003c\/li\u003e\n  \u003cli\u003eDesigned to match D3S xenon optical geometry for consistent beam pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs fit my vehicle and require special wiring?\u003c\/h3\u003e\n\n\u003cp\u003eThese D3S bulbs are built to original factory dimensions and electrical specifications, so they are intended for direct replacement without extra wiring or adapters. They will not work in halogen or LED-only housings; confirm your vehicle uses D3S xenon units before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit for vehicles with D3S xenon headlight modules\u003c\/li\u003e\n  \u003cli\u003eNo ballast or harness changes needed when replacing like-for-like\u003c\/li\u003e\n  \u003cli\u003eContact Termitor support if you are unsure about compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are the Termitor 2026 D3S bulbs and what is their expected lifespan?\u003c\/h3\u003e\n\n\u003cp\u003eTermitor specifies a six-year service life under normal operating conditions and rates the bulbs IP68 for water and dust resistance. The 35W xenon design also consumes less power than some aftermarket alternatives, which can contribute to stable long-term performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP68 waterproof rating for reliable weather resistance\u003c\/li\u003e\n  \u003cli\u003e35W xenon design for efficient, steady output\u003c\/li\u003e\n  \u003cli\u003eManufacturer-stated multi-year service life when used as intended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow quickly do these bulbs reach full brightness and how do they affect night driving?\u003c\/h3\u003e\n\n\u003cp\u003eThese Termitor units are engineered to reach full output almost instantly, eliminating slow warm-up periods common in older xenon bulbs. Faster illumination and a cooler 6000K color help provide clearer road-edge and sign visibility during night driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstant-on behavior to maximize visibility from startup\u003c\/li\u003e\n  \u003cli\u003eCool-white color enhances contrast and sign legibility\u003c\/li\u003e\n  \u003cli\u003eDesigned to produce stable beam patterns when fitted in compatible D3S housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Termitor 2026 D3S HID Bulbs are best suited for owners of vehicles equipped with D3S xenon headlight modules who want a brighter, whiter light without modifying the headlamp assembly. Do not choose these bulbs if your car uses halogen or LED headlamps. If you are replacing aged or dim OEM D3S bulbs and prefer a straightforward, plug-and-play upgrade with improved weather resistance and fast start-up, this pack of two is a practical option. For fitment questions, check your vehicle’s headlight type or contact the seller for confirmation before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these bulbs compatible with halogen headlight housings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Termitor D3S bulbs are made only for D3S xenon headlight assemblies and will not work correctly in halogen housings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need extra wiring or adapters to install these bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No additional wiring is normally required when replacing a like-for-like D3S xenon bulb; they are direct-fit to factory specifications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55168251953495,"sku":"B0G7WYXKYH","price":46.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-d3s-front-packaging.jpg?v=1790396801"},{"product_id":"termitor-h11-h8-h9-led-fog-light-bulbs-2026-2-pack-dual-sided-csp-90-000lm-canbus-ready","title":"Termitor H11\/H8\/H9 LED Fog Light Bulbs 2026 2‑Pack — Dual‑Sided CSP 90,000LM, CANBUS Ready","description":"\u003cp\u003e\u003cstrong\u003eTermitor 2026 H11\/H8\/H9 LED fog light bulbs are a high-output, dual-sided CSP replacement that deliver a factory-pattern beam, long lifespan, and Canbus compatibility in a plug-and-play 2-pack.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese bulbs combine Termitor’s latest 20S-Pro chipset with ultra-thin CSP chips and a three-stage cooling system to produce intense, focused light while staying within the size constraints of most halogen housings. They’re engineered to mimic the original beam pattern so you get improved nighttime visibility without blinding oncoming drivers, and the integrated driver and SmartSync CANBUS decoding reduce installation fuss and electrical errors.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these bulbs and what makes the light quality different?\u003c\/h3\u003e\n\u003cp\u003eThe Termitor 2026 bulbs use 16 precision CSP chips per bulb driven by the 20S-Pro chipset to produce up to 90,000 lumens (pair output perspective) with a focused, dual-sided emitter arrangement. The result is a powerful forward throw with wide lateral coverage while minimizing scattered glare.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-sided CSP layout for even center-to-edge illumination\u003c\/li\u003e\n  \u003cli\u003e0.03-inch chip spacing to recreate halogen-style beam cutoffs\u003c\/li\u003e\n  \u003cli\u003eHigh lumen efficiency for stronger perceived brightness versus halogen\u003c\/li\u003e\n  \u003cli\u003eReduced dark spots and minimized oncoming glare\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and block error codes?\u003c\/h3\u003e\n\u003cp\u003eTermitor designed the H11\/H8\/H9 form factor to match the footprint of common halogen bulbs so they slip into stock sockets without bulky adapters. A built-in SmartSync CANBUS 3.0 driver handles linear decoding and prevents most flicker or dashboard error messages across the majority of vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit H11\/H8\/H9 base—no extra brackets required\u003c\/li\u003e\n  \u003cli\u003eIntegrated CANBUS-ready driver for compatibility with 99.5% of cars\u003c\/li\u003e\n  \u003cli\u003eSome sensitive makes may need an external decoder—Termitor support available\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play wiring with no tools for most installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the cooling system preserve performance and life span?\u003c\/h3\u003e\n\u003cp\u003eThese LEDs use aviation-grade aluminum, dual copper heat pipes and an aerodynamic fin pack paired with a high-RPM silent fan to move heat away from the chips rapidly. That triple-cooling architecture keeps operating temperatures low, extending useful life and sustaining output throughout long drives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAviation-grade aluminum body for fast thermal transfer\u003c\/li\u003e\n  \u003cli\u003eDual copper heat pipes and precision fins for airflow management\u003c\/li\u003e\n  \u003cli\u003e22,000 RPM 9-blade silent fan for active cooling under load\u003c\/li\u003e\n  \u003cli\u003eIP68 water and dust protection for reliable all-weather use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what maintenance is needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed for speed: each bulb has a compact driver and a stock-sized base so replacements typically take minutes without modification. Maintenance is minimal—periodic checks for secure seating and clean lens surfaces are all that’s required thanks to corrosion-resistant materials and a long rated service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo tools or adapters usually required—fits like a halogen bulb\u003c\/li\u003e\n  \u003cli\u003eBuilt-in driver eliminates extra boxes and wiring clutter\u003c\/li\u003e\n  \u003cli\u003eLong-life LEDs (90,000+ hours) reduce replacement frequency\u003c\/li\u003e\n  \u003cli\u003eIP68 protection helps prevent water-related failures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: drivers who want a substantial, factory-style upgrade to their fog lighting without complicated wiring or fitment changes. These bulbs suit commuters, delivery drivers, and weekend road trippers who prioritize long-lasting brightness, improved night visibility, and broad vehicle compatibility without sacrificing beam control. If you need maximum lumen output in an H11\/H8\/H9 footprint with built-in CANBUS decoding and robust cooling, the Termitor 2026 pair offers a dependable plug-and-play solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these H11 bulbs plug-and-play for most cars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these bulbs use the stock H11\/H8\/H9 footprint and an integrated driver for quick plug-and-play installation in most vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will they trigger dashboard errors or flicker?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They include SmartSync CANBUS 3.0 decoding to prevent most errors and flicker; a small number of sensitive models may need an external decoder.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55168572916055,"sku":"B0GVT3MYTN","price":57.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-packaging-h11-h8-h9-2-pack.jpg?v=1790408694"},{"product_id":"termitor-9005-hb3-led-headlight-bulbs-pack-of-2-60-000lm-6500k-cool-white-precision-adjustable-beam","title":"Termitor 9005\/HB3 LED Headlight Bulbs Pack of 2 — 60,000LM, 6500K Cool White, Precision-Adjustable Beam","description":"\u003cp\u003e\u003cstrong\u003eTermitor 9005\/HB3 LED bulbs are a plug-and-play pair of ultra-bright automotive headlight lamps that deliver up to 60,000 lumens and a precision-adjustable beam for improved nighttime visibility.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Termitor 9005\/HB3 bulbs combine a compact 1:1 form factor with a newly upgraded 16-chip array, a rotating installation clip for precise beam alignment, and a high-speed cooling system housed in aerospace-grade aluminum. Designed to replace standard 9005\/HB3 halogen units without adapters, this two-pack aims to reduce glare, improve road illumination, and simplify installation for compatible vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these bulbs improve night driving?\u003c\/h3\u003e\n\u003cp\u003eThe 16 high-performance LED chips and 6500K cool-white color temperature produce a crisp, high-contrast beam that helps make road signs, lane markings, and obstacles easier to see. The focused beam pattern minimizes dispersed light, reducing scatter that can blind oncoming drivers when properly aligned.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpgraded 16-chip array for stronger light output\u003c\/li\u003e\n  \u003cli\u003e6500K cool white for clearer contrast\u003c\/li\u003e\n  \u003cli\u003ePrecision-adjustable insertion angle to target the beam\u003c\/li\u003e\n  \u003cli\u003eDesigned to limit stray light and glare when aligned\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these bulbs easy to install and fit my car?\u003c\/h3\u003e\n\u003cp\u003eYes—Termitor engineered these 9005\/HB3 LEDs with a true 1:1 mini design that fits most stock housings without extra adaptors. The bulbs include a rotating clip and a small wrench so you can fine-tune the insertion angle during installation, typically completed in under three minutes per side on compatible vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrue 1:1 mini shape for direct replacement\u003c\/li\u003e\n  \u003cli\u003eRotating clip plus wrench for angle adjustments\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play wiring with CBNBUS driver compatibility\u003c\/li\u003e\n  \u003cli\u003eConfirm bulb size via vehicle manual or original bulb part number\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the cooling and durability compare to other LED bulbs?\u003c\/h3\u003e\n\u003cp\u003eTermitor uses aerospace-grade aluminum with a hollow-carved structure and a 22,000 RPM turbo cooling fan to draw heat away from the LEDs fast, extending service life. The bulbs are sealed with an anti-aging rubber ring and rated to resist dust and water intrusion, which contributes to a long operational lifespan.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed 22,000 RPM turbo cooling fan for thermal control\u003c\/li\u003e\n  \u003cli\u003eAerospace-grade aluminum body for heat dissipation\u003c\/li\u003e\n  \u003cli\u003eIP68-style protection from moisture and dust\u003c\/li\u003e\n  \u003cli\u003eEstimated service life exceeding tens of thousands of hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs cause flicker or compatibility problems?\u003c\/h3\u003e\n\u003cp\u003eMost installations will be trouble-free thanks to the included CBNBUS drivers that are designed to work with more than 95% of vehicles and to prevent flickering or dashboard error messages. However, some vehicle electronics and aftermarket CANBUS systems can be sensitive; check your vehicle manual or original bulb part number when in doubt.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCBNBUS drivers reduce flicker and decoding errors\u003c\/li\u003e\n  \u003cli\u003eCompatible with the majority of modern vehicles\u003c\/li\u003e\n  \u003cli\u003eSome cars may require additional adapters or resistors\u003c\/li\u003e\n  \u003cli\u003eVerify fit using the vehicle manual or OEM bulb code\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who want a straightforward upgrade from halogen 9005\/HB3 bulbs to a brighter, whiter LED output are the primary audience—especially those who value quick installation, precise beam aiming, and robust cooling. These bulbs suit daily commuters, night-shift drivers, and anyone seeking improved roadway clarity without extensive modifications, provided the vehicle accepts 9005\/HB3 form-factor replacements.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these 9005\/HB3 bulbs fit without adapters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Termitor 9005\/HB3 bulbs use a true 1:1 mini form factor for direct plug-and-play replacement in compatible housings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these bulbs work with my car's CANBUS system?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They include CBNBUS drivers compatible with most vehicles, but some models may still need extra resistors or adapters—check your vehicle manual or OEM bulb code.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55168583270743,"sku":"B0GH71TVN9","price":48.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-packaging-9005-hb3.jpg?v=1790409114"},{"product_id":"termitor-h7-led-bulbs-h7ll-mini-6500k-pack-of-2-plug-and-play-oem-fit-canbus","title":"Termitor H7 LED Bulbs H7LL Mini 6500K Pack of 2 — Plug-and-Play OEM Fit, CANbus","description":"\u003cp\u003e\u003cstrong\u003eTermitor H7 H7LL LED bulbs are compact, plug-and-play replacements that deliver very high-brightness 6500K white light in a true 1:1 OEM mini form without external adapters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese upgraded H7 bulbs are designed to swap into original halogen housings while improving visibility and beam precision. Built with a compact body, integrated thermal management, and CANbus decoding, they aim to provide a cleaner, whiter beam, reduced installation time and broad vehicle compatibility. The lights are marketed as a durable option for drivers who want an easy, direct replacement that avoids bulky external drivers and complex wiring.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these bulbs compared with stock halogen lamps?\u003c\/h3\u003e\n\u003cp\u003eTermitor positions these H7 LED bulbs as significantly brighter than standard halogen bulbs, producing a much stronger white beam intended for longer reach and clearer definition of the road. The high-density LED chips and optimized optics create a high lumen output while maintaining a focused beam pattern.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated lumen output designed to greatly exceed typical halogen levels for improved nighttime visibility.\u003c\/li\u003e\n  \u003cli\u003e6500K cool white color temperature for a crisp, daylight-like appearance.\u003c\/li\u003e\n  \u003cli\u003eOptical design aims to concentrate light where it’s needed, reducing wasted scatter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs fit my car without modifications?\u003c\/h3\u003e\n\u003cp\u003eThe bulbs use a 1:1 OEM-sized housing intended to match the original H7 footprint so they can be installed without cutting, splicing or external adapters. The plug-and-play approach is designed for quick swaps into most housings; non-polarity wiring simplifies the process even further.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrue mini body matches original H7 sizing for direct installation.\u003c\/li\u003e\n  \u003cli\u003eNo external driver or adapter required—integrated electronics inside the bulb.\u003c\/li\u003e\n  \u003cli\u003eNon-polarity design and standard connector make a simple insert-and-go replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the beam pattern and glare control perform?\u003c\/h3\u003e\n\u003cp\u003eThese bulbs are engineered to imitate the filament position of halogen H7 lamps so the light projection aligns with existing reflectors and projector lenses. That alignment is intended to produce a sharp cutoff and reduce stray glare for oncoming drivers while filling the road evenly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlim chip placement modeled on halogen filament position for a focused beam.\u003c\/li\u003e\n  \u003cli\u003eAimed to eliminate dark spots and shadow gaps across the road surface.\u003c\/li\u003e\n  \u003cli\u003eDesigned to produce a clear cutoff line to limit glare toward oncoming traffic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these bulbs reliable and compatible with modern vehicle electronics?\u003c\/h3\u003e\n\u003cp\u003eTermitor includes an onboard IC decoding and voltage stabilization system to reduce error messages, flicker and radio interference in many modern vehicles. The design also incorporates active cooling and a sealed build to improve longevity and performance in varied conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in CANbus-compatible electronics to reduce dashboard errors and flicker.\u003c\/li\u003e\n  \u003cli\u003eHigh-speed silent fan plus aluminum heat sink for accelerated heat dissipation.\u003c\/li\u003e\n  \u003cli\u003eIP68-rated sealing for water and dust resistance and long operational life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who want a direct H7 LED upgrade that fits original housings, offers a cool white beam and minimizes installation work. This product targets people replacing halogen H7 bulbs seeking stronger illumination, reduced glare through correct beam alignment, and broad vehicle compatibility without adding external adapters or heavy rewiring.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these H7 bulbs require an external driver or adapter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the bulbs have an integrated driver and are designed as a plug-and-play 1:1 OEM fit without extra adapters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these trigger dashboard errors on modern cars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They include built-in CANbus decoding and voltage stabilization to prevent most error codes and flicker on compatible vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55168652116311,"sku":"B0GN21M33W","price":57.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-h7-front-view-pack-of-2.jpg?v=1790410786"},{"product_id":"termitor-h13-9008-led-bulbs-pack-of-2-6500k-pure-white-70-000lm-ip68-waterproof","title":"Termitor H13\/9008 LED Bulbs Pack of 2 — 6500K Pure White, 70,000LM, IP68 Waterproof","description":"\u003cp\u003e\u003cstrong\u003eTermitor H13\/9008 LED bulbs deliver bright 6500K pure-white light in a direct 1:1 halogen form factor for easy plug-and-play upgrades with waterproof IP68 protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSwap your factory H13\/9008 halogen or HID bulbs for a high-output LED pair that fits existing housings and dust covers without adapters. These Termitor bulbs produce strong daylight-color illumination, include built-in CANBUS electronics to reduce dashboard errors, and are engineered for extended runtime with active cooling and durable materials. The set of two is designed for fog light or headlight retrofits where size, compatibility, and weather resistance matter.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright and what color temperature will I get?\u003c\/h3\u003e\n\u003cp\u003eThese bulbs run at 70,000 lumens combined output and a crisp 6500K color temperature, giving a daylight-like white beam that improves visual clarity for road signs and lane markings. The beam pattern aims for consistent coverage without dark zones or distracting glare when installed properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e70,000LM total output for the pair\u003c\/li\u003e\n  \u003cli\u003e6500K cool white for higher contrast\u003c\/li\u003e\n  \u003cli\u003eEngineered beam to minimize dark spots and glare\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill they fit my car and install easily?\u003c\/h3\u003e\n\u003cp\u003eTermitor H13\/9008 bulbs are made to the same 1:1 halogen dimensions so they fit most factory housings and dust covers without trimming. The plug-and-play design requires no external drivers or complex wiring—remove the old bulb, plug in the new unit, and secure the socket as before.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrue 1:1 halogen size for direct replacement\u003c\/li\u003e\n  \u003cli\u003e3-minute install: unplug old, plug new, test\u003c\/li\u003e\n  \u003cli\u003eNo external driver boxes or cutting required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weatherproof are these bulbs?\u003c\/h3\u003e\n\u003cp\u003eBuilt with aviation-grade aluminum and an active 22,000 RPM cooling fan, these bulbs are designed for long life and consistent output. The IP68 rating protects the electronics from dust and immersion, making them suitable for wet or off-road conditions where moisture and dirt are common.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP68 waterproof and dustproof rating\u003c\/li\u003e\n  \u003cli\u003eActive cooling fan and durable aluminum housing\u003c\/li\u003e\n  \u003cli\u003eRated service life measured in tens of thousands of hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo they work with modern vehicle electronics?\u003c\/h3\u003e\n\u003cp\u003eYes—the bulbs include integrated CANBUS circuitry to reduce the chance of error codes or flickering on most vehicles. They’re advertised to be compatible with approximately 99% of vehicles that use H13\/9008 sockets, but checking fit and error-handling with your specific make and model is recommended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in CANBUS support to minimize dashboard errors\u003c\/li\u003e\n  \u003cli\u003eDesigned for broad compatibility with H13\/9008 systems\u003c\/li\u003e\n  \u003cli\u003eStill verify with your vehicle if additional resistors are needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who want a straightforward halogen-size LED upgrade—commuters, night-time travelers, and off-road enthusiasts who need brighter, whiter light without modifying housings or running external drivers. If you prioritize fitting original sealed housings, weather resistance, and reduced electronic interference, this Termitor H13\/9008 set is tailored to those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these H13\/9008 bulbs fit my car without modifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are true 1:1 halogen size designed to fit most factory housings, but check your vehicle's socket and dust cover to confirm clearance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need additional parts to prevent error codes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most vehicles are CANBUS compatible with these bulbs, though a small number may still require resistors or adapters.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55168656081239,"sku":"B0GMMF7FWX","price":45.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-h13-9008-front-view.jpg?v=1790410856"},{"product_id":"termitor-9007-hb5-led-headlight-bulbs-pack-of-2-6500k-cool-white-80-000lm-set-plug-play","title":"Termitor 9007\/HB5 LED Headlight Bulbs - Pack of 2, 6500K Cool White, 80,000LM Set, Plug \u0026 Play","description":"\u003cp\u003e\u003cstrong\u003eTermitor 9007\/HB5 LED bulbs deliver a powerful, plug‑and‑play upgrade that replicates halogen beam pattern while producing up to 80,000 lumens per set for clearer nighttime visibility.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReplace dim or inconsistent halogen lights with a high-output LED solution built to fit like the original. These Termitor 9007\/HB5 bulbs pair advanced optics with robust thermal engineering to provide long life and stable performance without extra adapters or complex wiring. Designed for broad vehicle compatibility and DOT compliance, they focus on delivering consistent beam shape and reduced glare for oncoming traffic.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these bulbs and what color do they produce?\u003c\/h3\u003e\n\u003cp\u003eThe pair produces a combined output of approximately 80,000 lumens per set, tuned to a crisp 6500K cool white. That balance favors contrast and road detail, improving the driver’s ability to see lane markings and hazards compared with standard halogen output.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e80,000 lumens per set, driven by 12 high‑performance LED chips per bulb.\u003c\/li\u003e\n  \u003cli\u003e6500K color temperature for bright, daylight‑style white light.\u003c\/li\u003e\n  \u003cli\u003e1500% brighter claim based on lumen comparison to typical halogens.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and cause electrical errors?\u003c\/h3\u003e\n\u003cp\u003eTermitor’s 9007 lights are engineered for broad compatibility and use an intelligent CBNBUS driver to work with sensitive electrical systems. Most installations are true plug‑and‑play, reducing the chance of flicker, bulb-out warnings, or dashboard errors on modern vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to match OEM 1:1 form factor for tight housings and factory dust caps.\u003c\/li\u003e\n  \u003cli\u003eCBNBUS driver mitigates CANbus or ECU error signals in many models.\u003c\/li\u003e\n  \u003cli\u003eAdvertised 98%+ vehicle compatibility—check fit for specific years and trims.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is heat managed and how long will the bulbs last?\u003c\/h3\u003e\n\u003cp\u003eEfficient thermal design keeps the LEDs cool for extended operation. Aviation‑grade aluminum, a thermostatic copper plate, and a 20,000 RPM cooling fan work together to dissipate heat and maintain stable light output.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eActive cooling with high‑speed fan to reduce operating temperature.\u003c\/li\u003e\n  \u003cli\u003eCopper thermal plate improves heat transfer from LED chips to housing.\u003c\/li\u003e\n  \u003cli\u003eEstimated service life exceeds 70,000 hours under normal conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these bulbs produce safe beam pattern and glare control?\u003c\/h3\u003e\n\u003cp\u003eTermitor calibrates the LED emitters to recreate the halogen beam footprint, focusing light where it's needed without scattering into oncoming drivers’ eyes. The result is a clean cutoff and even illumination across the road surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1:1 beam pattern replication reduces dark spots and hot spots.\u003c\/li\u003e\n  \u003cli\u003eCalibration minimizes forward glare while improving roadside visibility.\u003c\/li\u003e\n  \u003cli\u003eDOV‑approved to FMVSS 108, tested for legal on‑road use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who want a high‑output, low‑hassle headlight upgrade that fits factory housings and prioritizes reliable, consistent illumination. Ideal for commuters, night drivers, and vehicle owners seeking long life and plug‑and‑play installation without extra adapters. Always verify bulb size and local regulations before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these 9007 bulbs require an external adapter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Termitor 9007 bulbs are all‑in‑one plug‑and‑play units that do not need external adapters for most vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these bulbs road‑legal?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are DOT‑approved to FMVSS 108 per the manufacturer’s test report, but check local laws before installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55168659947863,"sku":"B0DZNVLSF6","price":52.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-9007-front-packaging.jpg?v=1790411018"},{"product_id":"termitor-h11-h8-h9-h16-led-fog-light-bulbs-pack-of-2-6500k-90-000lm-equivalent-adjustable-1-1-fit","title":"Termitor H11\/H8\/H9\/H16 LED Fog Light Bulbs Pack of 2 — 6500K 90,000LM Equivalent, Adjustable 1:1 Fit","description":"\u003cp\u003e\u003cstrong\u003eTermitor H11\/H8\/H9\/H16 LED fog light bulbs deliver a compact, adjustable 6500K beam with up to 90,000LM equivalent brightness in a plug-and-play twin pack.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Termitor bulbs are engineered for drivers who need a brighter, more precisely aimed fog or auxiliary beam without rewiring or bulky housings. The set uses a mini 1:1 profile so it fits like the factory lamps and includes a rotating clip and wrench for fine-tuning insertion angle. Built from aerospace-grade aluminum with active cooling and IP68 sealing, the bulbs aim to combine high lumen output with durable thermal and moisture protection for long service life.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I install these bulbs and adjust the beam?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is designed to be straightforward: remove the old bulb, plug in the Termitor unit, then use the included wrench to rotate the clip and set the insertion angle. The 1:1 mini design avoids the need for extra adapters and keeps the bulb seated like the original factory lamp.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play connector fits H11\/H8\/H9\/H16 sockets without modification.\u003c\/li\u003e\n  \u003cli\u003eRotating clip plus wrench allows 360° insertion-angle adjustment for a focused beam.\u003c\/li\u003e\n  \u003cli\u003eAdjust angle until cutoff\/beam pattern matches housing alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability can I expect from the 16-chip design?\u003c\/h3\u003e\n\n\u003cp\u003eThe bulb uses 16 high-performance LED chips to provide a bright 6500K cool white output intended to improve visibility in fog and low-light conditions. Thermal management combines a hollow-carved aerospace aluminum body with a 22,000 RPM turbo fan to control temperature and extend LED life.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-output 16-chip array for strong, crisp illumination.\u003c\/li\u003e\n  \u003cli\u003eTurbo fan and hollow-carved aluminum body for efficient heat dissipation.\u003c\/li\u003e\n  \u003cli\u003eRated IP68 with an anti-aging rubber ring to resist water and dust ingress.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs work with my vehicle and electronics?\u003c\/h3\u003e\n\n\u003cp\u003eTermitor equips the bulbs with advanced CBNBUS drivers designed to be compatible with over 95% of vehicles, minimizing flicker and error codes on many modern CAN-BUS systems. Still, manufacturer fitment tools may sometimes be inaccurate—verify by checking your owner’s manual or the original bulb part number.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCBNBUS drivers reduce flicker and decoding errors on most cars.\u003c\/li\u003e\n  \u003cli\u003eVerify bulb size (H11\/H8\/H9\/H16) against your vehicle documentation.\u003c\/li\u003e\n  \u003cli\u003eNo extra resistors required in most installations, but some CAN systems may need adapters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will these bulbs last and what maintenance do they need?\u003c\/h3\u003e\n\n\u003cp\u003eTermitor advertises an extended life expectancy—over 85,000 hours—thanks to robust thermal design and high-quality materials. The IP68 sealing prevents moisture-related failures and the durable rubber ring helps reduce maintenance frequency, though periodic inspection of connections and housing seals is recommended.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAerospace-grade aluminum and turbo cooling fan for extended operating life.\u003c\/li\u003e\n  \u003cli\u003eIP68 waterproofing and dust protection for harsh conditions.\u003c\/li\u003e\n  \u003cli\u003eMinimal upkeep: check seals and wiring during routine vehicle maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers who want a simple upgrade from standard halogen fog or auxiliary bulbs to a much brighter, cooler-toned LED option will appreciate this Termitor twin pack. It’s aimed at people who need precise beam alignment, compatibility with modern vehicle electronics, and long-term durability without adding bulky adapters. If you prioritize plug-and-play installation, adjustable beam control, and strong moisture resistance for fog or low-speed driving scenarios, these bulbs are a practical aftermarket choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these bulbs plug-and-play for H11 sockets?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The bulbs use a 1:1 mini profile and plug into H11\/H8\/H9\/H16 sockets without adapters in most vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do they require additional resistors for CAN-BUS?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most cars won’t need extra resistors thanks to CBNBUS drivers, but a few CAN-BUS systems may still require a decoder.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55168706773335,"sku":"B0F13QM9SZ","price":57.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-packaging_6c177027-1f45-40f7-a3c8-8f23a734f048.jpg?v=1790412316"},{"product_id":"termitor-h13-9008-7th-gen-led-headlight-bulbs-pack-of-2-6500k-1-1-oem-fit-ip68-waterproof","title":"Termitor H13\/9008 7th‑Gen LED Headlight Bulbs, Pack of 2 6500K 1:1 OEM Fit, IP68 Waterproof","description":"\u003cp\u003e\u003cstrong\u003eThese Termitor 7th‑Gen H13\/9008 LED bulbs deliver a compact, OEM‑sized 1:1 replacement that produces crisp 6500K white light, ultra‑bright output, and IP68 weatherproofing for long‑lasting, glare‑controlled night driving.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUpgrading fog or headlight bulbs can dramatically improve visibility and driver confidence. Termitor’s newest 7th‑generation H13\/9008 set combines advanced CSP LED chips, an OEM‑matching footprint, and a robust cooling system so you get brighter, sharper illumination without complex wiring or excessive glare. The pack of two is engineered to fit most vehicles, resist water and dust, and last for many years.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter are these bulbs compared with factory lamps?\u003c\/h3\u003e\n\n\u003cp\u003eThe Termitor H13 uses 24 premium CSP chips designed to multiply visible output compared with many stock halogen bulbs. The result is a stronger, clearer white beam at 6500K that improves contrast and object recognition at night while reducing eye fatigue.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eManufacturer rating: up to 1400% brighter than typical halogen stock bulbs.\u003c\/li\u003e\n  \u003cli\u003eHigh‑intensity 6500K white light for clear road detail and contrast.\u003c\/li\u003e\n  \u003cli\u003eCrystal‑clear beam pattern with reduced scatter for better forward visibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and require extra wiring?\u003c\/h3\u003e\n\n\u003cp\u003eTermitor designed the H13\/9008 bulbs to match OEM 1:1 dimensions, so they install like original halogens in most cars and trucks. The plug‑and‑play, non‑polarity connectors avoid additional adapters or splice work in nearly all applications.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompact 1:1 size fits tight housings where larger aftermarket bulbs fail.\u003c\/li\u003e\n  \u003cli\u003eNon‑polarity plug‑and‑play connector—no soldering or re‑routing needed.\u003c\/li\u003e\n  \u003cli\u003eBuilt‑in CANbus compatibility for 99.5% of vehicles; some models may need a decoder.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is glare and beam pattern controlled for safety?\u003c\/h3\u003e\n\n\u003cp\u003eThe LEDs are precisely positioned to match the original filament location, creating a focused beam with a sharp cutoff that minimizes glare for oncoming drivers. That accurate alignment results in even illumination across the road, eliminating dark spots and distracting scatter.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePrecision alignment produces a clean, concentrated beam and defined cutoff.\u003c\/li\u003e\n  \u003cli\u003eZero‑glare design reduces stray light into oncoming lanes.\u003c\/li\u003e\n  \u003cli\u003eConsistent beam width prevents hot spots and shadowed areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these bulbs and what cooling protects them?\u003c\/h3\u003e\n\n\u003cp\u003eDurability is a core design goal: the housings use aviation‑grade aluminum, an IP68 waterproof rating, and an active cooling system that maintains performance over long service life. A high‑speed, low‑noise fan plus efficient heat dissipation keeps LED temperatures low for up to 75,000+ hours of useful life.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAviation‑grade aluminum body for fast heat transfer and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eWhisper‑quiet 22,000 RPM cooling fan integrated for sustained output.\u003c\/li\u003e\n  \u003cli\u003eIP68 waterproofing to handle rain, slush, and road spray reliably.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers who want a dependable, high‑output LED upgrade that installs in minutes and matches OEM fitment will appreciate Termitor’s H13\/9008 pair. It’s ideal for commuters, night‑time drivers, and anyone who needs a durable, weatherproof replacement to improve contrast and visibility without complicated wiring or bulky adapters. If you drive a late‑model vehicle that uses H13\/9008 bulbs—especially in fog or headlight positions—this kit offers a long‑lasting, glare‑controlled upgrade backed by broad vehicle compatibility and support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these H13\/9008 bulbs need a CANbus decoder?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most vehicles (99.5%) work without a decoder thanks to the built‑in CANbus support; a few models may require a decoder to avoid error codes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long will the Termitor 7th‑Gen bulbs last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are rated for 75,000+ hours with active cooling and aviation‑grade materials to maintain output over many years.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55168737214807,"sku":"B0GF1JL3VW","price":52.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-h13-front-packaging.jpg?v=1790412879"},{"product_id":"termitor-h11-h8-h9-led-headlight-bulbs-pack-of-2-6500k-16-csp-bright-mini-1-1-fit-ip68-long-life","title":"Termitor H11\/H8\/H9 LED Headlight Bulbs Pack of 2 — 6500K 16-CSP Bright Mini 1:1 Fit, IP68 Long Life","description":"\u003cp\u003e\u003cstrong\u003eTermitor's 2026 H11\/H8\/H9 LED bulbs are compact, plug-and-play vehicle lights that deliver a dramatically brighter 6500K beam using 16 CSP chips while keeping OEM fit and long-lasting IP68 durability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese next-generation bulbs combine a 1:1 mini-sized housing with high-density 16 CSP LED chips and advanced thermal management to produce intense, crystal-white light without changing the factory socket or geometry. Engineered for fog and low-beam applications, they emphasize a focused beam pattern, reduced glare, and broad vehicle compatibility so installers get a direct upgrade without wiring headaches.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter are these Termitor bulbs compared with stock lights?\u003c\/h3\u003e\n\u003cp\u003eThe Termitor 16-CSP LEDs produce substantially more visible output than typical halogen bulbs and are tuned to a 6500K white color temperature for higher contrast. That brighter output helps improve visual clarity in low-light conditions while maintaining a crisp cutoff.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUp to 14× brighter output versus many factory halogens\u003c\/li\u003e\n  \u003cli\u003e6500K cool white beam for enhanced contrast\u003c\/li\u003e\n  \u003cli\u003ePrecision chip placement to preserve beam shape and cutoff\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and require extra parts?\u003c\/h3\u003e\n\u003cp\u003eTermitor bulbs use a 1:1 OEM-sized form factor so they slide into most factory housings where space is limited. They are non-polarity, plug-and-play units with an integrated CANbus system to prevent most dashboard errors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact 1:1 design fits many tight engine bays\u003c\/li\u003e\n  \u003cli\u003eNon-polarity plug-and-play — no rewiring needed\u003c\/li\u003e\n  \u003cli\u003eUpgraded CANbus compatibility with 99.5% of vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the beam perform — glare, focus, and pattern?\u003c\/h3\u003e\n\u003cp\u003eTermitor aligns its LED chips to match the original filament position, producing a focused beam with a defined cutoff that minimizes glare for oncoming drivers. The result is a clean, consistent light pattern without dark spots or scattered light, suitable for fog or low-beam use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChip alignment mirrors OEM filament for accurate beam shape\u003c\/li\u003e\n  \u003cli\u003eSharp cutoff line to reduce glare for other drivers\u003c\/li\u003e\n  \u003cli\u003eEven light distribution avoids hot spots and shadowing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these bulbs and what is the expected lifespan?\u003c\/h3\u003e\n\u003cp\u003eBuilt with aviation-grade aluminum and an advanced cooling system, the Termitor units are engineered for extended service life and reliable performance even in harsh conditions. They carry an IP68 rating and use a high-RPM fan design to maintain optimal operating temperature.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAviation-grade aluminum housing for efficient heat dissipation\u003c\/li\u003e\n  \u003cli\u003eWhisper-quiet 22,000 RPM fan and robust thermal path\u003c\/li\u003e\n  \u003cli\u003eIP68 waterproofing with an expected 75,000+ hours life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers who want a straightforward, high-output upgrade that keeps factory fitment and beam geometry—especially people with vehicles that have limited space around the headlamp or fog housing. These bulbs suit DIY installers, fleet operators, and anyone looking to improve nighttime clarity without aftermarket adapters. Note: while the CANbus covers most models, a small number of vehicles may still require a decoder—Termitor support can advise on compatibility and solutions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these Termitor bulbs require a ballast or adapter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No; they are plug-and-play 1:1 fit with non-polarity wiring. Most vehicles won’t need a ballast or adapter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these LEDs waterproof for all weather?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they have an IP68 rating for protection against dust and water ingress in typical road conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55168746586455,"sku":"B0GLPX5YP8","price":52.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-view-pack-of-2.jpg?v=1790413088"},{"product_id":"termitor-h1-led-bulbs-6500k-cool-white-pack-of-2-1-1-mini-size-plug-and-play-ultra-bright","title":"Termitor H1 LED Bulbs 6500K Cool White Pack of 2 — 1:1 Mini Size, Plug-and-Play Ultra Bright","description":"\u003cstrong\u003eTermitor H1 2026 upgraded LED bulbs are a compact, plug-and-play replacement that delivers ultra-bright 6500K cool white light with a factory-matching beam pattern and long service life.\u003c\/strong\u003e\n\n\u003cp\u003eReplace worn H1 halogen lamps with these Termitor H1 LED bulbs to get a dramatic brightness boost and a precise beam without modifying your headlight housings. Designed to match the original bulb footprint, they slot into most H1 sockets and dust covers for a quick install. The combination of aviation-grade aluminum, active cooling, and an upgraded IC makes them suitable for many modern vehicles while resisting moisture and road vibration.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter are these bulbs compared with standard halogens?\u003c\/h3\u003e\n\u003cp\u003eTermitor’s upgraded H1 LEDs are engineered to produce a much stronger white light than factory halogens, improving forward visibility and contrast at night. While actual lumen readings vary by vehicle and housing, the design focuses light efficiently to create a perception of significantly increased brightness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-color 6500K cool white output for crisp road detail\u003c\/li\u003e\n  \u003cli\u003eOptimized optic and LED placement for a focused beam\u003c\/li\u003e\n  \u003cli\u003eReduces scattered light that wastes output\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my car without extra parts or wiring?\u003c\/h3\u003e\n\u003cp\u003eYes — Termitor H1 bulbs use a true 1:1 mini-size form factor that mirrors original halogen dimensions so you can reinstall without adapters or external drivers. The bulbs are plug-and-play, designed to clear dust covers and factory housings for straightforward replacement in most vehicles with H1 fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect H1 socket compatibility—no adapters required\u003c\/li\u003e\n  \u003cli\u003eCompact housing fits tight dust covers and assemblies\u003c\/li\u003e\n  \u003cli\u003eQuick installation typically under five minutes per side\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Termitor control heat and ensure a long life?\u003c\/h3\u003e\n\u003cp\u003eThese LEDs combine aviation-grade aluminum construction with a high-efficiency copper substrate and an active cooling fan to remove heat from the LEDs. Stable thermal management helps the diodes maintain output and extends operational life, while an IP68 rating provides protection against water and dust.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum body and copper substrate for fast heat transfer\u003c\/li\u003e\n  \u003cli\u003eIntegrated fan keeps junction temperatures low\u003c\/li\u003e\n  \u003cli\u003eIP68 waterproofing for durability in wet conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I get errors or dashboard warnings after installation?\u003c\/h3\u003e\n\u003cp\u003eMany vehicles require CAN Bus compatibility to prevent flicker or error codes; Termitor equips these H1 bulbs with an upgraded smart IC to reduce such problems. While the bulbs are compatible with most systems, a small number of vehicles with strict monitoring may still need a capacitor or decoder for complete error suppression.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmart IC for flicker-free performance in most vehicles\u003c\/li\u003e\n  \u003cli\u003eAbout 98% compatibility with common CAN Bus systems\u003c\/li\u003e\n  \u003cli\u003eOptional decoders can be used for highly restrictive electrical systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers who want a high-output, factory-friendly H1 replacement without custom wiring or bulky adapters will appreciate Termitor’s plug-and-play design. These bulbs suit commuters and night drivers who need sharper, cooler light and dependable thermal protection for extended service life, while enthusiasts who prefer easy installation and a clean beam pattern will value the OEM-like fit and reduced glare to oncoming traffic.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are Termitor H1 bulbs plug-and-play?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They use a true 1:1 mini form and install into H1 sockets without adapters or extra drivers in most vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these bulbs cause dashboard errors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most vehicles are error-free thanks to the upgraded IC, but a few cars may still require a decoder for full compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55168782401879,"sku":"B0GN2DZJJM","price":57.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-h1-front-packaging.jpg?v=1790413855"},{"product_id":"termitor-9008-h13-led-headlight-bulbs-pack-of-2-6500k-dual-beam-canbus-ready-ip68-waterproof","title":"Termitor 9008\/H13 LED Headlight Bulbs Pack of 2 — 6500K Dual‑Beam Canbus Ready, IP68 Waterproof","description":"\u003cp\u003e\u003cstrong\u003eTermitor 9008\/H13 LED headlight bulbs are a plug-and-play dual-beam replacement delivering ultra‑high output, crisp 6500K cool-white light and built-in Canbus compatibility for most cars, trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese 9008 (H13) LED bulbs upgrade standard halogen headlights with a compact 1:1 fit, optimized beam control and robust weatherproofing. Designed for everyday driving and tougher conditions alike, they offer a dramatic increase in perceived brightness while aiming to preserve correct cutoff and minimize glare. The package includes two bulbs and a fan‑cooled aluminum housing to help maintain performance over long operating hours.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these bulbs and what does 6500K look like?\u003c\/h3\u003e\n\u003cp\u003eThe bulbs claim an ultra‑high lumen rating and produce a cool white light around 6500K, which reads as a daylight‑white tone. That color temperature improves contrast in many nighttime situations and makes road signs and lane markings easier to spot.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual‑beam output handles both high and low functions in a single 9008\/H13 unit.\u003c\/li\u003e\n  \u003cli\u003e6500K cool white for a crisp daylight appearance on the road.\u003c\/li\u003e\n  \u003cli\u003eHigh lumen design intended to increase visible range compared with standard halogens.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and trigger errors?\u003c\/h3\u003e\n\u003cp\u003eTermitor built these bulbs with a 1:1 physical profile for 9008\/H13 sockets and included a Canbus driver intended to prevent most dashboard warnings. Many modern vehicles will accept them without extra adapters, but a small number of models with sensitive electrical systems may still need a decoder or extra resistors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect plug‑and‑play for sockets labeled 9008 or H13; no cutting or splicing required.\u003c\/li\u003e\n  \u003cli\u003eOnboard Canbus electronics reduce flicker and false error codes for about 99% of cars.\u003c\/li\u003e\n  \u003cli\u003eIf you have a warning light, adding a compatible CAN decoder or resistor pack typically resolves it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the beam pattern and will it dazzle other drivers?\u003c\/h3\u003e\n\u003cp\u003eThe lamps are engineered with a focused cutoff to mimic halogen beam geometry, delivering a defined hotspot and controlled spread to reduce glare. Proper alignment during installation is important to maintain the intended pattern and avoid dazzling oncoming traffic.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOptimized light cutoff to minimize stray glare while illuminating the road ahead.\u003c\/li\u003e\n  \u003cli\u003ePrecise LED placement aims to reproduce the halogen beam shape for correct focus.\u003c\/li\u003e\n  \u003cli\u003eAdjust headlight housing alignment after installation for best on‑road results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these bulbs for harsh conditions?\u003c\/h3\u003e\n\u003cp\u003eTermitor designed the housings with aviation‑grade aluminum and active fan cooling to dissipate heat and preserve LED longevity. An IP68 ingress protection rating means they are sealed against dust and sustained water exposure, suitable for rain, snow and muddy environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAviation‑grade aluminum body plus a high‑speed cooling fan for efficient thermal management.\u003c\/li\u003e\n  \u003cli\u003eIP68 rating for protection against dust and immersion, usable in tough weather.\u003c\/li\u003e\n  \u003cli\u003eSolid build intended for everyday commuting, highway travel and off‑road use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Car and truck owners who want a bright, cool‑white LED upgrade for 9008\/H13 halogen sockets, prefer a simple plug‑and‑play install, and need weather‑resistant performance for varied driving conditions. If you drive frequently at night, use your vehicle off‑road, or want a clean halogen‑style beam with modern LED output, these bulbs are a practical option. Verify socket type (9008\/H13) and, for a few vehicle models with sensitive electronics, be prepared to add a decoder for full error suppression.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these 9008\/H13 bulbs fit my car without modifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are designed for direct plug‑and‑play into 9008\/H13 sockets, but confirm your vehicle socket type before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I get dashboard error codes after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Built‑in Canbus drivers prevent errors for most vehicles; a few sensitive systems may still require an external decoder.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55168854688087,"sku":"B0GJT5WCF8","price":57.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-9008-front-view-pack-of-2.jpg?v=1790414998"},{"product_id":"termitor-9005-hb3-led-bulbs-7th-gen-6500k-pack-of-2-1-1-oem-fit-plug-and-play-ip68","title":"Termitor 9005\/HB3 LED Bulbs — 7th-Gen 6500K Pack of 2, 1:1 OEM Fit Plug-and-Play IP68","description":"\u003cp\u003e\u003cstrong\u003eTermitor 7th-Gen 9005\/HB3 LED bulbs are plug-and-play, ultra-compact fog light replacements that deliver crisp 6500K white light, a true 1:1 OEM size fit, and long-lasting, glare-controlled beam performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese upgraded Termitor 9005 (HB3) bulbs combine a miniaturized 1:1 housing with high-output CSP LEDs to give fog and low-beam applications far greater visibility while preserving factory fitment. They are engineered for quick installation—no bulky drivers or extra wiring—and for consistent beam alignment that reduces dark spots and glare toward oncoming drivers. Rugged cooling and IP68 sealing aim to keep them running reliably across seasons.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these Termitor 9005 bulbs compared with stock halogens?\u003c\/h3\u003e\n\u003cp\u003eThe 16 high-intensity CSP chips in each bulb produce a dramatic increase in usable light, quoted as a 1000% boost over typical halogen output, paired with a crisp 6500K color. This yields clearer roadway contrast and improved sightlines in low-light conditions without shifting into extreme blue that can reduce visibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated up to 90000LM peak output (pair dependent on measurement methods).\u003c\/li\u003e\n  \u003cli\u003e6500K cool white for neutral, high-contrast illumination.\u003c\/li\u003e\n  \u003cli\u003eMulti-chip array for broad, even light distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs install easily on my vehicle?\u003c\/h3\u003e\n\u003cp\u003eYes—Termitor engineered the 7th-gen 9005 to match the OEM 1:1 size and filament position so it fits into most housings without modification. The non-polarity, plug-and-play connector eliminates extra wire splicing or external drivers, letting most DIYers install them in minutes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrue 1:1 form factor for direct swap into existing sockets.\u003c\/li\u003e\n  \u003cli\u003eNo external ballast or bulky driver required.\u003c\/li\u003e\n  \u003cli\u003eNon-polarity design reduces installation errors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the light pattern avoid glare and dark spots?\u003c\/h3\u003e\n\u003cp\u003eTermitor’s LED array and filament-position replication are calibrated to mirror the original bulb’s light source location, producing a well-defined cutoff and uniform beam. The result is minimal hotspotting, reduced scatter, and a beam that accentuates the road without blinding oncoming traffic.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision alignment to reproduce OEM filament placement.\u003c\/li\u003e\n  \u003cli\u003eMulti-calibration for even horizontal and vertical spread.\u003c\/li\u003e\n  \u003cli\u003eDesigned to produce a clean cutoff for reduced glare.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these bulbs and will they trigger dashboard errors?\u003c\/h3\u003e\n\u003cp\u003eBuilt with aviation-grade aluminum, an oversized copper base, dual liquid-cooled tubes and a 22,000 RPM silent fan, these bulbs prioritize heat management for long life. An upgraded CANbus controller provides broad compatibility; most vehicles will see no error codes, though a small number may require an inline decoder.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP68 waterproof rating for wet-weather reliability.\u003c\/li\u003e\n  \u003cli\u003eDesigned for 75,000+ hours of service life under proper conditions.\u003c\/li\u003e\n  \u003cli\u003e99.5% compatibility via integrated CANbus regulation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who want a hassle-free upgrade from halogen 9005\/HB3 bulbs to a compact, high-output LED that fits factory housings and aims to deliver a clean, long-lasting beam. Ideal for commuters, night drivers, and anyone replacing fog or low-beam bulbs who values simple installation, defined light patterning, and durable cooling in varying weather conditions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these 9005 bulbs fit my factory socket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—Termitor’s 1:1 design matches OEM 9005\/HB3 sockets for most vehicles and installs without extra wiring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I get error codes after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most cars won’t show errors thanks to the built-in CANbus regulation; a small number may need an external decoder.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55169319797079,"sku":"B0GDXVHBDK","price":83.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-9005-front-view_f7eb80b3-b8bf-434d-bbd1-ca62b76c5427.jpg?v=1790422185"},{"product_id":"termitor-9005-9006-led-bulbs-combo-pack-of-4-6500k-white-1-1-mini-size-with-cooling-fan","title":"Termitor 9005\/9006 LED Bulbs Combo Pack of 4 — 6500K White, 1:1 Mini Size with Cooling Fan","description":"\u003cp\u003e\u003cstrong\u003eTermitor 9005\/9006 upgraded LED bulbs are a plug-and-play, high-output lighting solution delivering crisp 6500K white beams, compact 1:1 housings, and active cooling for long-lasting, glare-controlled illumination.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Termitor combo bulbs (9005\/HB3 and 9006\/HB4) replace factory halogens with a high-lumen LED option engineered for focused beam patterns, wide vehicle compatibility, and simplified installation. They combine a compact 1:1 mini form factor with an integrated cooling fan and smart driver to reduce electrical errors and maintain stable performance over time. The package of four is ideal for headlight and fog lamp upgrades where factory fitment and a sharp, white light are desired.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these bulbs improve nighttime visibility?\u003c\/h3\u003e\n\u003cp\u003eThe Termitor LEDs produce a 6500K white light at a very high lumen output that creates a clearer, more defined road view without scattered glare. Their ultra-thin chip pitch and tailored optics concentrate light into a consistent beam, reducing dark spots and improving peripheral illumination.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e135,000 total lumens across the set for stronger forward illumination\u003c\/li\u003e\n  \u003cli\u003e0.03-inch chip pitch for tight beam focus and reduced stray light\u003c\/li\u003e\n  \u003cli\u003e6500K color temperature for neutral, high-contrast white light\u003c\/li\u003e\n  \u003cli\u003eEngineered beam pattern helps avoid blinding oncoming drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and are they easy to install?\u003c\/h3\u003e\n\u003cp\u003eTermitor designed these bulbs as a 1:1 mini replacement to match OEM dimensions and connectors—no adapters or extra drivers required. The non-polar wireless design and standard HB3\/HB4 sockets make installation straightforward for most cars and trucks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrue 1:1 mini size matches original bulb footprint\u003c\/li\u003e\n  \u003cli\u003eNo external adapters or bulky drivers needed\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play wiring minimizes modification time—about 3 minutes typical\u003c\/li\u003e\n  \u003cli\u003eIntegrated CAN bus support reduces dash errors and flicker\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the cooling and durability compare to other LED bulbs?\u003c\/h3\u003e\n\u003cp\u003eTermitor combines aerospace-grade aluminum and copper heat pipes with a high-speed 15,000 RPM fan to dissipate heat efficiently, extending service life and keeping output stable. The result is continuous operation rated for tens of thousands of hours under typical conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAerospace-grade aluminum housing for fast thermal transfer\u003c\/li\u003e\n  \u003cli\u003eCopper tube heat pipes improve heat conduction\u003c\/li\u003e\n  \u003cli\u003e15,000 RPM active fan maintains safe operating temperature\u003c\/li\u003e\n  \u003cli\u003eDesigned for long life—rated over 60,000 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these bulbs road-legal and vehicle-friendly?\u003c\/h3\u003e\n\u003cp\u003eTermitor's 9005\/9006 set meets DOT requirements and includes an integrated smart IC to help prevent compatibility issues with modern vehicle electronics. While the bulbs support CAN bus and many vehicle systems, a small number of cars may require additional steps to avoid warnings or flicker.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDOT-approved design meeting FMVSS No.108 standards\u003c\/li\u003e\n  \u003cli\u003eSmart IC driver and linear decoding for broad compatibility\u003c\/li\u003e\n  \u003cli\u003eWorks with over 99% of vehicle models; contact support for rare exceptions\u003c\/li\u003e\n  \u003cli\u003eNon-polar design simplifies swap into OEM sockets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Ideal for drivers who want a reliable, high-contrast LED replacement for factory halogen 9005\/HB3 and 9006\/HB4 bulbs without modifying wiring or housing. Choose this pack of four if you need a compact, DOT-approved upgrade that balances powerful illumination, focused beam control, active cooling, and broad vehicle compatibility. If you drive late at night frequently or want a noticeable improvement in beam clarity and longevity over halogen bulbs, this Termitor set is a practical upgrade. For vehicles that still display electronic warnings after installation, Termitor customer service can advise on next steps.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these bulbs require adapters or extra drivers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No adapters or external drivers are needed; the 1:1 mini design is plug-and-play with OEM sockets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these trigger dashboard error messages?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They support CAN bus and smart decoding for most vehicles; rare errors can be resolved with Termitor support.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55169327530327,"sku":"B0GFHG452H","price":74.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-packaging-9005-9006-bulbs.jpg?v=1790422375"},{"product_id":"termitor-h7-led-headlight-bulbs-pack-of-2-6500k-cool-white-1-1-halogen-fit-ip68","title":"Termitor H7 LED Headlight Bulbs Pack of 2 — 6500K Cool White, 1:1 Halogen Fit, IP68","description":"\u003cp\u003e\u003cstrong\u003eTermitor H7 light bulbs are high-output, plug-and-play H7 replacement bulbs engineered to deliver intense 6500K illumination, OEM-sized fit, and long service life for most vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese H7 bulbs combine ultra-bright white light with a direct 1:1 halogen footprint so you can swap them into existing H7 sockets without modifications. Built for all-weather use, they include IP68 protection and built-in error-free electronics so many modern vehicles won’t need additional decoders. The design balances strong beam distance and a controlled cutoff to reduce glare while improving nighttime visibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these bulbs compared with standard halogen H7s?\u003c\/h3\u003e\n\u003cp\u003eThe Termitor H7 set is specified for extremely high luminous output and a crisp 6500K color temperature that reads as cool white. That combination enhances contrast and helps road signs, lane markings, and obstacles stand out more clearly at night.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated luminous output suited for long-range illumination and improved peripheral clarity.\u003c\/li\u003e\n  \u003cli\u003e6500K cool white tone for clearer contrast with asphalt and signage.\u003c\/li\u003e\n  \u003cli\u003ePrecision beam design to focus light where drivers need it most without excessive scatter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my car and require extra parts to install?\u003c\/h3\u003e\n\u003cp\u003eTermitor H7 bulbs are manufactured to the standard H7 dimensions so they match factory halogen sockets and headlight housings. They are marketed as plug-and-play and include error-suppression electronics for broad vehicle compatibility, reducing the need for external CANbus decoders in most installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1:1 OEM-sized form factor for direct swap into H7 sockets.\u003c\/li\u003e\n  \u003cli\u003eIntegrated error-free circuitry to avoid dashboard warnings on many vehicles.\u003c\/li\u003e\n  \u003cli\u003eSimple plug-and-play wiring—typical install takes minutes with common tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are the bulbs and can they handle bad weather?\u003c\/h3\u003e\n\u003cp\u003eThese H7 bulbs are built for durability with advanced thermal management and an IP68 waterproof rating for reliable operation in rain and wet road conditions. Lifetime estimates place service life at roughly 85,000 hours—approximately a decade under typical driving patterns—minimizing replacements and maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP68 ingress protection for resistance to dust and prolonged water exposure.\u003c\/li\u003e\n  \u003cli\u003eThermal design to manage heat and extend LED lifespan.\u003c\/li\u003e\n  \u003cli\u003eLong-rated service life (about 85,000 hours \/ up to ~10 years depending on use).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow quickly can I install them and what should I expect after fitting them?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be fast: the bulbs use the same base and mounting footprint as stock H7 halogens, so most users can complete the swap in minutes. After installation you should see a noticeably brighter, whiter beam; confirm proper beam aim to avoid dazzling oncoming traffic.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play installation typically under three to five minutes per side for someone comfortable with basic vehicle access.\u003c\/li\u003e\n  \u003cli\u003eNo major modifications or extra ballast in most cars thanks to built-in compatibility electronics.\u003c\/li\u003e\n  \u003cli\u003ePost-installation beam check recommended to ensure safe cutoff alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers who want a high-output, long-lasting upgrade from factory H7 halogens without major electrical changes will find these Termitor bulbs appealing. They suit commuters, long-distance drivers, and anyone seeking stronger night illumination and a whiter beam tone while keeping a straightforward, OEM-style installation. If your vehicle requires a specific CANbus solution or manufacturer restriction, verify compatibility with your car’s electrical system before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do Termitor H7 bulbs fit all H7 sockets?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are made to standard H7 dimensions for broad fit, but check your vehicle’s headlamp access and space before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need a CANbus decoder?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most cars won’t need one because of built-in error-suppression, yet a few models may still require a decoder—confirm compatibility first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55169336279383,"sku":"B0GV45GYN5","price":52.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-h7-front-packaging_93e823f7-2afe-4468-bf27-fb94112b55c9.jpg?v=1790422675"},{"product_id":"termitor-h13-9008-led-bulbs-pack-of-2-6500k-cool-white-80-000lm-combined-ip68-waterproof","title":"Termitor H13\/9008 LED Bulbs Pack of 2 — 6500K Cool White, 80,000LM Combined, IP68 Waterproof","description":"\u003cp\u003e\u003cstrong\u003eTermitor H13\/9008 LED bulbs are high-output, direct-replacement off-road lamps that deliver a crisp 6500K beam with plug-and-play installation and rugged weatherproofing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Termitor bulbs upgrade standard fog or auxiliary lights to a bright, cool white output while preserving the factory fit and beam geometry. Built with multiple high-efficiency chips, active cooling, and aerospace-grade materials, they aim to increase visibility on trails and in poor weather without bulk drivers or complicated wiring. The package contains two bulbs sized for H13\/9008 sockets and is engineered to work with most vehicle electrical systems.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these bulbs and what color is the light?\u003c\/h3\u003e\n\u003cp\u003eThe bulbs produce very high lumen output thanks to 24 performance chips per bulb, tuned to a cool white 6500K color temperature for clear contrast and visibility. The light is designed to be much stronger than stock halogens while maintaining a defined beam suitable for auxiliary and fog housings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated up to approximately 80,000 lumens combined (package figure).\u003c\/li\u003e\n  \u003cli\u003e6500K cool white for crisp, high-contrast illumination.\u003c\/li\u003e\n  \u003cli\u003eFocused beam pattern to limit scatter and glare.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eTermitor engineered the bulbs for a 1:1 OEM size match to H13\/9008 housings so they slide into existing sockets without cutting or adapters. The compact, non-polarized design and lack of external drivers make installation quick and straightforward—even in tight engine bays.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrue H13\/9008 physical dimensions for direct fitment.\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play: no soldering, splicing, or bulky bases required.\u003c\/li\u003e\n  \u003cli\u003eApproximately three minutes per bulb for most vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are they and are they weatherproof?\u003c\/h3\u003e\n\u003cp\u003eConstruction uses aerospace-grade aluminum and a hollowed heat-sink with a high-speed cooling fan to manage temperatures under extended use. Seals and housing materials are rated to IP68, protecting the bulbs against dust and immersion for reliable off-road operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed 22,000 RPM turbo fan for active thermal control.\u003c\/li\u003e\n  \u003cli\u003eHollow-carved aluminum body for rapid heat dissipation.\u003c\/li\u003e\n  \u003cli\u003eIP68-rated anti-aging rubber seals for dust and water protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these compatible with vehicle electronics and will they cause errors?\u003c\/h3\u003e\n\u003cp\u003eIntegrated CANBUS compatibility reduces the chance of dashboard errors, flicker, or warning messages on the majority of vehicles. Because vehicle electrical systems vary, it's recommended to confirm bulb size by checking the owner's manual or the stock bulb part number; Termitor support can advise if a decoder is needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in CANBUS support for over 98% of vehicles.\u003c\/li\u003e\n  \u003cli\u003eNo external driver needed in most installations.\u003c\/li\u003e\n  \u003cli\u003eSupport available from Termitor for edge-case systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: drivers and off-road enthusiasts looking to replace dim factory fog or auxiliary lights with a high-output, cool-white LED solution that fits without modification. This product suits those who need improved trail illumination, long service life, and rugged weather resistance while keeping installation fast and simple. If you prioritize focused beam control, easy fitment, and long-term reliability for weekend off-roads or daily adverse-weather driving, these Termitor H13\/9008 LEDs are designed for you.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these replace H13\/9008 halogen bulbs directly?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are a 1:1 physical H13\/9008 replacement designed for direct plug-and-play installation with no housing modifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these trigger dashboard errors on my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most vehicles are compatible thanks to built-in CANBUS support, but check your owner's manual or original bulb part number; contact Termitor if a decoder is needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55169336344919,"sku":"B0DPSC44QR","price":57.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-view-bulb-pair.jpg?v=1790422676"},{"product_id":"termitor-9007-hb5-led-headlight-bulbs-pack-of-2-6500k-cool-white-80-000lm-peak-plug-and-play-1-1-halogen-fit","title":"Termitor 9007\/HB5 LED Headlight Bulbs Pack of 2 — 6500K Cool White, 80,000LM Peak, Plug-and-Play 1:1 Halogen Fit","description":"\u003cp\u003e\u003cstrong\u003eTermitor 9007\/HB5 LED bulbs are high-output, plug-and-play replacements that deliver crisp 6500K cool-white high\/low beam light in a true 1:1 halogen size for easy fitment and long life.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Termitor 9007\/HB5 bulbs are engineered to match OEM dimensions while upgrading brightness, longevity, and durability. With a cool 6500K color temperature, an advanced cooling and vibration-resistant housing, and a decoder-free installation, they are designed for drivers who want a straightforward lighting upgrade without wiring complexity.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these bulbs and what color do they produce?\u003c\/h3\u003e\n\u003cp\u003eTermitor 9007\/HB5 LEDs produce intense cool-white illumination designed to improve visibility at night and in low-light conditions. Brightness is concentrated into a high\/low beam pattern that balances wide near-field light and focused long-range output.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated up to approximately 80,000LM peak output across the pack.\u003c\/li\u003e\n  \u003cli\u003e6500K cool white for high contrast and clearer road detail.\u003c\/li\u003e\n  \u003cli\u003eEngineered beam pattern for wide pavement coverage and distance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs fit my vehicle and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe Termitor bulbs maintain true 1:1 halogen 9007\/HB5 dimensions for direct replacement in compatible sockets. Installation is plug-and-play with clear connectors—no extra decoders, wiring, or modifications required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact OEM-style dimensions for hassle-free fitment.\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play connectors with polarity-friendly design.\u003c\/li\u003e\n  \u003cli\u003eNo decoder, relay, or CANbus adapter necessary for most vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these bulbs and what determines their lifespan?\u003c\/h3\u003e\n\u003cp\u003eDurability is a focus: the bulbs use reinforced housings and shock-resistant components to resist vibration from cars and motorcycles. Advanced heat management and robust construction extend usable life for dependable service under varied conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVibration-optimized structure to maintain beam alignment over time.\u003c\/li\u003e\n  \u003cli\u003eEnhanced cooling to prevent thermal degradation.\u003c\/li\u003e\n  \u003cli\u003eEstimated service life up to about 85,000 hours under normal use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and performance features should I expect on the road?\u003c\/h3\u003e\n\u003cp\u003eThese LEDs are built to provide a stable beam with a defined cutoff and smooth high\/low transitions, helping you retain predictable illumination in traffic and on highways. The construction aims to reduce glare while improving visibility for the driver.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecise beam pattern for consistent cutoff and reduced scatter.\u003c\/li\u003e\n  \u003cli\u003eSmooth switching between high and low beam modes for clarity.\u003c\/li\u003e\n  \u003cli\u003eShock-resistant design to preserve alignment in rough conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and riders who want a straightforward, high-output lighting upgrade without modifications—ideal for owners of vehicles that accept 9007\/HB5 bulbs and for motorcyclists seeking resilient, bright replacement lamps. These bulbs suit users who prefer a cool-white appearance, want long service life, and value a decoder-free, plug-and-play installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these 9007\/HB5 bulbs require decoders or extra wiring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Termitor 9007\/HB5 bulbs are decoder-free and install plug-and-play in most compatible sockets without additional wiring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these on a motorcycle as well as a car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Their vibration-resistant design and OEM-size fit make them suitable for many motorcycles and cars that accept 9007\/HB5 bulbs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55169336541527,"sku":"B0G3PMDDLG","price":57.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-9007-front-view-pack-of-2.jpg?v=1790422675"},{"product_id":"termitor-h11-h9-h8-led-fog-low-beam-bulbs-6500k-cool-white-2-pack-high-lumen-ip68-waterproof","title":"Termitor H11\/H9\/H8 LED Fog \u0026 Low Beam Bulbs 6500K Cool White, 2-Pack High-Lumen IP68 Waterproof","description":"\u003cstrong\u003eTermitor 2026 H11 LED bulbs are a plug-and-play, high-output H11\/H9\/H8 fog and low-beam replacement that deliver crisp 6500K cool white light, strong waterproofing, and CANbus compatibility for reliable all-weather visibility.\u003c\/strong\u003e\n\n\u003cp\u003eThese upgraded Termitor H11 modules replace stock halogen fog and low-beam bulbs with a compact, OEM-sized LED unit engineered for straightforward installation and sustained performance. With a claimed combined output per set and a cool 6500K color temperature, they are intended to brighten road edges and improve contrast in poor conditions without complex wiring or add-on drivers. The design focuses on thermal management, beam accuracy, and resisting moisture and dust to keep lights working across seasons.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these bulbs and what does the color temperature look like?\u003c\/h3\u003e\n\u003cp\u003eThe Termitor 2026 bulbs are specified to produce a very high lumen output and a cool white 6500K tone that reads close to daylight. This temperature helps make reflective road signs, lane markings, and hazards easier to spot at distance compared with warm halogen tones.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6500K cool white light for crisp contrast\u003c\/li\u003e\n  \u003cli\u003eHigh-lumen design for extended reach and visible range\u003c\/li\u003e\n  \u003cli\u003ePrecision chip placement to reduce dark zones and hot spots\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill they fit my vehicle and require any extra wiring?\u003c\/h3\u003e\n\u003cp\u003eTermitor built these bulbs to match OEM H11\/H9\/H8 proportions so they install like stock bulbs in compatible sockets. They are advertised as direct replacements with an integrated driver and CANbus-ready decoding, so most installs don’t need additional resistors, adapters, or wiring modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1:1 replacement shape for H11\/H9\/H8 sockets\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play installation—no extra harness required for most vehicles\u003c\/li\u003e\n  \u003cli\u003eIntegrated CANbus decoding to reduce flicker and error codes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these bulbs handle heat, moisture, and long-term use?\u003c\/h3\u003e\n\u003cp\u003eDurability is a focus: the housings use aviation-grade aluminum for heat dissipation and a sealed IP68-rated enclosure to keep out water and dust. That combination aims to protect the LED components and the cooling system so the modules can work reliably in rain, snow, and dusty environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP68 waterproof sealing for immersion and dust resistance\u003c\/li\u003e\n  \u003cli\u003eAluminum heat sink to manage operating temperatures\u003c\/li\u003e\n  \u003cli\u003eManufacturer-rated long-life performance under typical conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will the beam pattern affect oncoming drivers?\u003c\/h3\u003e\n\u003cp\u003eThe bulbs are designed with focused optics and precise LED alignment to produce a wide, forward-reaching beam with a defined cutoff. The goal is to illuminate the road surface and sides without creating excessive glare for other road users, which is important for fog and low-beam applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered beam cutoff to reduce blinding glare\u003c\/li\u003e\n  \u003cli\u003eEliminates common dark spots found with misaligned LED retrofits\u003c\/li\u003e\n  \u003cli\u003eWide spread plus long-distance center throw for improved road coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These Termitor 2026 H11\/H9\/H8 LED bulbs are aimed at drivers who want a brighter, whiter light than stock halogens without bulky external drivers or major vehicle modifications. They suit commuters, off-roaders, and anyone who needs dependable fog or low-beam illumination in wet or dusty conditions, provided the bulb size and local regulations match the intended use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these bulbs compatible with CANbus systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The bulbs include integrated decoding designed to work with most CANbus systems to prevent flicker and error codes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need extra wiring or resistors to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Generally no; these are plug-and-play replacements with built-in drivers, though some vehicle models may still require adapters.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55170269938007,"sku":"B0GCNHZZVS","price":68.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-packaging_4070bfc7-db76-470b-87e4-063dad55b99b.jpg?v=1790426411"},{"product_id":"termitor-9006-hb4-led-bulbs-pack-of-2-6500k-cool-white-canbus-ready-ip68-waterproof-high-output-fog-low-beam-replacement","title":"Termitor 9006 (HB4) LED Bulbs Pack of 2 — 6500K Cool White, CANbus-Ready, IP68 Waterproof High-Output Fog\/Low-Beam Replacement","description":"\u003cstrong\u003eThese Termitor 9006 (HB4) LED bulbs deliver a powerful, weatherproof replacement for fog and low-beam sockets with a long service life and plug‑and‑play installation.\u003c\/strong\u003e\n\n\u003cp\u003eIf you're upgrading fog lamps or low beams, the Termitor 9006 HB4 LED pair offers a high‑output, hard‑wearing alternative to halogen bulbs. Designed to match 9006\/HB4 sockets exactly, these LEDs put out a cool 6500K white and are engineered to work with most vehicle electronics, including CANbus systems, while resisting water and dust with an IP68 rating.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter are these LEDs compared to factory halogens?\u003c\/h3\u003e\n\u003cp\u003eTermitor rates this 9006 set as dramatically brighter than typical halogen bulbs, giving you crisper white light and improved visibility for signs and road features at night. The bulbs concentrate light into a stable beam pattern so you see more of the road ahead without scattering glare.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh lumen output for better forward illumination.\u003c\/li\u003e\n  \u003cli\u003e6500K cool white color for increased contrast at night.\u003c\/li\u003e\n  \u003cli\u003eEngineered beam with a defined cutoff to limit glare for oncoming drivers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and are they easy to install?\u003c\/h3\u003e\n\u003cp\u003eThe Termitor 9006 LEDs are built to a 1:1 mini form factor that fits standard 9006\/HB4 sockets, making them a direct replacement for most fog and low-beam housings. No extra drivers or splicing are required in the majority of installs — just plug in, secure, and you're finished in minutes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect 9006\/HB4 mechanical and electrical fit.\u003c\/li\u003e\n  \u003cli\u003ePlug‑and‑play wiring—no soldering or adapters needed for most cars.\u003c\/li\u003e\n  \u003cli\u003eInstructions and installation gloves included in the box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these bulbs in wet or off‑road conditions?\u003c\/h3\u003e\n\u003cp\u003eWith an IP68 ingress protection rating and robust construction, these LEDs are built to survive rain, mud, and vibration associated with off‑road use. Their design also prioritizes thermal stability to maintain consistent output over many operating hours.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP68 waterproofing for immersion and dust resistance.\u003c\/li\u003e\n  \u003cli\u003eRugged housing to withstand vibration from UTVs and ATVs.\u003c\/li\u003e\n  \u003cli\u003eLong rated lifespan to reduce replacement frequency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes the bulb work with modern vehicle electronics like CANbus?\u003c\/h3\u003e\n\u003cp\u003eTermitor includes anti‑flicker circuitry and CANbus‑ready compatibility to reduce error messages on many newer vehicles. While designed to be broadly compatible, some vehicles may still need a resistor or decoder depending on the chassis and factory lamp monitoring system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAnti‑flicker electronics minimize dashboard errors.\u003c\/li\u003e\n  \u003cli\u003eWorks with most cars, trucks, SUVs equipped for 9006\/HB4 bulbs.\u003c\/li\u003e\n  \u003cli\u003eIf an error persists, small adapters or decoders are a simple aftermarket fix.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: drivers who want a brighter, longer‑lived fog or low‑beam option that installs quickly—especially owners of cars, trucks, UTVs and ATVs who need reliable illumination in wet or rough conditions. Choose Termitor 9006 HB4 LEDs if you value a crisp 6500K light, engineered beam control to avoid glaring others, and a durable unit rated for many seasons of use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are Termitor 9006 LEDs plug-and-play?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they use the standard 9006\/HB4 socket and usually install without extra wiring or drivers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these bulbs work with CANbus systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are CANbus‑ready with anti‑flicker electronics, though a decoder may be needed on a few vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55170270036311,"sku":"B0GDYNX2L3","price":39.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-9006-front-view-pack-of-2.jpg?v=1790426412"},{"product_id":"termitor-led-fog-light-combo-9005-hb3-9006-hb4-165-000lm-ultra-bright-plug-and-play-1-1-fit","title":"Termitor LED Fog Light Combo 9005\/HB3 \u0026 9006\/HB4 — 165,000LM Ultra-Bright, Plug-and-Play 1:1 Fit","description":"\u003cp\u003e\u003cstrong\u003eTermitor 9005\/HB3 \u0026amp; 9006\/HB4 bulbs are a plug-and-play LED fog light combo delivering ultra-bright, focused illumination with a true halogen-size fit and long life.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Termitor bulbs replace standard 9005\/HB3 and 9006\/HB4 halogen fog lights with high-output LEDs engineered for clear road visibility and simple installation. Built with aerospace-grade aluminum, 22,000 RPM cooling fans, and an adjustable 360° mounting buckle, the set aims to combine high lumen output with dependable heat management and a halogen-style footprint so it fits existing housings and dust covers without extra wiring.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter are these bulbs compared with stock halogen lamps?\u003c\/h3\u003e\n\u003cp\u003eThe Termitor combo produces vastly higher lumen output than typical halogens, engineered to give a stronger beam pattern and clearer roadway illumination. Brighter light improves contrast and helps you see obstacles and lane markers faster, especially in poor weather.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCombined peak output marketed at up to 165,000LM across the set.\u003c\/li\u003e\n  \u003cli\u003eClaimed up to 12–15× the perceived brightness of standard halogen bulbs.\u003c\/li\u003e\n  \u003cli\u003eFocused beam design to reduce scatter and glare toward other drivers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs fit my vehicle and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eTermitor bulbs are sized to match halogen 1:1 dimensions so they slot into most original fog lamp housings without trimming or a bulky driver box. The all-in-one design removes the need for extra external wiring for a cleaner, faster swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrue 1:1 physical size for direct replacement of 9005\/HB3 and 9006\/HB4 bulbs.\u003c\/li\u003e\n  \u003cli\u003eAll-in-one construction — no separate driver box required.\u003c\/li\u003e\n  \u003cli\u003eIncludes an adjustable buckle and wrench to set beam angle and orientation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is heat managed and what is the expected lifespan?\u003c\/h3\u003e\n\u003cp\u003eThermal control combines aerospace-grade aluminum housings with a high-speed 22,000 RPM cooling fan to move heat away from the LEDs quickly. That active cooling, paired with quality components, supports long-term stability and a claimed extended operational life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAircraft-grade aluminum body for rapid heat dissipation.\u003c\/li\u003e\n  \u003cli\u003e22,000 RPM fan to actively cool the LED module.\u003c\/li\u003e\n  \u003cli\u003eManufacturer-rated life expectancy exceeding 90,000 hours under normal use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I encounter electrical issues like flicker or error messages?\u003c\/h3\u003e\n\u003cp\u003eTermitor uses advanced CBNBUS drivers to reduce flicker and avoid common CANbus\/decoder errors on the majority of vehicles. However, some cars with strict electrical systems may still require additional adapters or resistors for full compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCBNBUS drivers designed to work with over 95% of vehicle systems.\u003c\/li\u003e\n  \u003cli\u003eGenerally plug-and-play, but check vehicle electronics if a dashboard error appears.\u003c\/li\u003e\n  \u003cli\u003eVerify bulb size by owner manual or existing bulb part number rather than only via online fitment tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers who want a high-output, plug-and-play fog light upgrade that mimics halogen dimensions while delivering stronger light and modern LED efficiency. It’s well suited for motorists seeking easier installation, a focused beam they can fine-tune during setup, and a long-lived LED solution for frequent night or bad-weather driving. Double-check your vehicle’s bulb type (9005\/HB3 or 9006\/HB4) before ordering and be prepared to consult your owner’s manual if your car has especially sensitive electrical systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these bulbs a direct plug-and-play replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the bulbs are true 1:1 halogen-size replacements and usually install without extra wiring or driver boxes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these require extra parts to avoid flicker on CANbus vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most cars work with the included CBNBUS drivers, but a few vehicles may need resistors or adapters to stop errors or flicker.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55170294645079,"sku":"B0F26FJCWP","price":60.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-pair-packaging.jpg?v=1790426930"},{"product_id":"termitor-h11-9005-led-bulbs-pack-of-4-6500k-cool-white-1500-brighter-canbus-ready-70k-hour-life","title":"Termitor H11+9005 LED Bulbs Pack of 4 — 6500K Cool White, 1500% Brighter \u0026 CANbus-Ready, 70K+ Hour Life","description":"\u003cstrong\u003eTermitor H11+9005 bulbs are high-output, plug-and-play LED replacements that deliver a focused 6500K cool white beam, extreme brightness, and long service life for turn signal and fog light housings.\u003c\/strong\u003e\n\n\u003cp\u003eThese Termitor H11+9005 LED bulbs pair compact 1:1 form-factor engineering with advanced decoding and thermal design to fit most stock housings while boosting on-road illumination. Built-in CANbus-ready electronics reduce error codes and flicker on the majority of modern vehicles, and the ultra-thin LED chip layout creates a precise cutoff and uniform light field so you get wider, farther visibility without annoying glare.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter are these bulbs compared with standard halogens?\u003c\/h3\u003e\n\u003cp\u003eThe Termitor pair multiplies visible output substantially versus factory halogen bulbs, using modern high-efficiency LED chips to achieve very high lumen figures and perceived brightness. That means clearer edge definition and improved visual response in low-light driving situations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated up to 110,000LM across the pack (total output optimized for H11+9005 combos).\u003c\/li\u003e\n  \u003cli\u003eAdvertised 1500% brightness increase over typical halogen equivalents.\u003c\/li\u003e\n  \u003cli\u003e6500K cool white color for crisp contrast and improved road detail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill they fit my vehicle and cause dashboard errors?\u003c\/h3\u003e\n\u003cp\u003eTermitor engineered these bulbs to match the stock bulb’s physical footprint and electrical behavior, minimizing installation hassles. The built-in intelligent IC driver and upgraded decoding make them compatible with over 98% of vehicles, though a few very sensitive CANbus systems might still need an external decoder.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1:1 mini design keeps the same bulb footprint as OEM H11 and 9005 sockets.\u003c\/li\u003e\n  \u003cli\u003eCANbus-ready electronics to prevent flicker and error messages in most cars.\u003c\/li\u003e\n  \u003cli\u003eNon-plastic connectors and reinforced construction for dependable contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Termitor manage heat and longevity?\u003c\/h3\u003e\n\u003cp\u003eEffective thermal control is central to long LED life; Termitor uses aviation-grade aluminum, a copper baseboard, and a high-speed cooling fan to rapidly move heat away from the LEDs. That combination extends stable output and keeps color consistent over tens of thousands of hours.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium aviation aluminum body improves passive heat conduction.\u003c\/li\u003e\n  \u003cli\u003e22,000 RPM cooling fan accelerates active heat dissipation.\u003c\/li\u003e\n  \u003cli\u003eEngineered lifespan exceeding 70,000 hours under normal use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these bulbs create glare for oncoming traffic?\u003c\/h3\u003e\n\u003cp\u003eTermitor’s upgraded beam optics and ultra-thin chip placement focus light into a controlled pattern with a clear cut-off line to reduce glare. The design aims for a wide, even spread without dark spots so the beam lights the road, not other drivers’ eyes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e0.03-inch ultra-thin LED chip profile for precise beam shaping.\u003c\/li\u003e\n  \u003cli\u003eWell-defined cutoff line to limit upward spill and glare.\u003c\/li\u003e\n  \u003cli\u003eBalanced forward throw for distance and lateral coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who want a direct-replacement LED upgrade with extreme brightness, precise beam control, and long service life — without major wiring changes. These bulbs suit commuters, night drivers, and owners of most modern cars and trucks seeking clearer fog and turn-signal illumination while retaining a plug-and-play installation. If your vehicle has an unusually sensitive electrical system, keep a CANbus decoder handy or contact Termitor for fit guidance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these bulbs plug-and-play for most cars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are 1:1 replacements and CANbus-ready for over 98% of vehicles; a decoder may be needed for very sensitive systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the expected lifespan of Termitor H11+9005 bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Designed for long life, these bulbs use advanced cooling and materials for over 70,000 hours of continuous operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55170295398743,"sku":"B0GWZYBTL2","price":79.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-packaging_81a5668a-a0c8-4221-809d-927516637a35.jpg?v=1790426953"},{"product_id":"termitor-9005-9006-led-bulb-combo-pack-pack-of-4-6500k-cool-white-1-1-oem-fit-ip68-waterproof-85k-hr-life","title":"Termitor 9005\/9006 LED Bulb Combo Pack — Pack of 4 6500K Cool White, 1:1 OEM Fit, IP68 Waterproof, 85K+ hr Life","description":"\u003cp\u003e\u003cstrong\u003eTermitor 9005\/HB3 \u0026amp; 9006\/HB4 LED combo bulbs are plug-and-play replacements that deliver bright 6500K cool-white light, long life, and waterproof reliability for fog and low-beam applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUpgrade your vehicle's visibility with a matched set: two 9005 (HB3) and two 9006 (HB4) bulbs in one pack. These LEDs are sized to the original equipment footprint so they slot straight into factory housings without adapters, and they pair aggressive brightness with thermal design to keep output stable in wet, dusty, or cold conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these Termitor LED bulbs compared with stock halogens?\u003c\/h3\u003e\n\n\u003cp\u003eThese bulbs produce a concentrated 6500K cool-white beam with a very high lumen output designed to exceed typical halogen performance. Brightness and color temperature improve contrast in low-light and adverse weather, helping you see road edges and obstacles sooner.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e135,000 lumens combined output for the pack, with crisp 6500K daylight color.\u003c\/li\u003e\n  \u003cli\u003eEngineered chip spacing for even illumination and fewer dark spots.\u003c\/li\u003e\n  \u003cli\u003eHigh-intensity beam pattern to extend visible range compared with halogen bulbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs fit my vehicle and are they easy to install?\u003c\/h3\u003e\n\n\u003cp\u003eTermitor 9005\/9006 bulbs use a true 1:1 OEM form factor so they match factory sockets and housings. No extra drivers, adapters, or bodywork are required—just unplug the old bulb, plug in the new LED, and secure it; most installs take around five minutes per side.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect-fit 9005 (HB3) and 9006 (HB4) sizes in the same pack for a complete set.\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play connectors designed for original harnesses, minimizing wiring changes.\u003c\/li\u003e\n  \u003cli\u003eCompatible with the majority of vehicles — check fitment for specific CANbus models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weatherproof are these LEDs for off-road or all-season use?\u003c\/h3\u003e\n\n\u003cp\u003eThe bulbs are built with robust materials and advanced thermal management to maintain performance in harsh conditions. An IP68 waterproof rating and long rated life reduce maintenance and replacement frequency, making them suitable for off-road, winter, and rainy-season driving.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIP68 rating resists dust and full immersion—protects electronics in mud and heavy rain.\u003c\/li\u003e\n  \u003cli\u003eAdvanced cooling and components extend expected service life beyond 85,000 hours.\u003c\/li\u003e\n  \u003cli\u003eSolid construction minimizes failure from vibration and temperature swings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these LEDs cause dashboard errors, flicker, or glare for other drivers?\u003c\/h3\u003e\n\n\u003cp\u003eTermitor includes smart driver circuitry to reduce flicker and prevent most dashboard error codes on modern electrical systems. Beam optics focus light to limit glare; however, always aim and test new bulbs to ensure safe cutoff and alignment for oncoming traffic.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSmart driver tech reduces flicker and false CANbus warnings on many vehicles.\u003c\/li\u003e\n  \u003cli\u003ePrecision beam focus and anti-glare engineering produce a defined cutoff line.\u003c\/li\u003e\n  \u003cli\u003eFor sensitive systems or warning lights, verify vehicle compatibility before fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers who want a hassle-free, high-output lighting upgrade that fits factory housings: commuters seeking better nighttime visibility, off-roaders needing durable, waterproof bulbs, and owners who prefer long-life LEDs to reduce replacements. If you want a bright, cool-white beam with simple installation and wide vehicle compatibility, this 4-pack provides both 9005 and 9006 sizes for a complete front-light refresh.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these 9005\/9006 bulbs plug-and-play?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They use a true 1:1 OEM form factor and plug directly into factory sockets with no adapters required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these bulbs work in wet or off-road conditions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They have an IP68 waterproof rating and robust construction for mud, rain, and harsh environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55170299003223,"sku":"B0G582MGW5","price":79.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-packaging_3a65992b-47b8-4ea0-8e01-094d5975d588.jpg?v=1790427015"},{"product_id":"termitor-9007-hb5-led-headlight-bulbs-pack-of-2-6500k-cool-white-90000lm-canbus-ready","title":"Termitor 9007\/HB5 LED Headlight Bulbs Pack of 2 — 6500K Cool White, 90000LM, CANbus Ready","description":"\u003cp\u003e\u003cstrong\u003eTermitor 9007\/HB5 LED bulbs provide extremely bright, plug-and-play replacement lighting for compatible vehicles, offering a crisp 6500K cool white beam and long service life.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Termitor 9007\/HB5 bulbs are engineered as direct halogen-size substitutes that deliver a dramatic increase in lumen output while maintaining a simple installation process. Designed for cars, trucks and SUVs that accept 9007\/HB5 bulbs, the set of two LEDs eliminates bulky external drivers and provides IP68-rated resistance to water and dust. The color temperature and beam pattern aim to improve visibility and visual contrast without changing the factory housings or requiring adapters.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these bulbs compared with stock halogens?\u003c\/h3\u003e\n\u003cp\u003eThe Termitor 9007\/HB5 LEDs produce very high lumen output suited to drivers who want a notably brighter beam than stock halogen bulbs. The 6500K cool white tint helps emphasize road markings and reflective surfaces at night. Expect a sharper, whiter appearance and stronger forward illumination while using the original headlight reflectors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated luminous output significantly higher than typical halogens for more visible distance.\u003c\/li\u003e\n  \u003cli\u003e6500K color temperature for daylight-like white light improving contrast.\u003c\/li\u003e\n  \u003cli\u003eBeam designed to use existing housings without major modification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and how difficult is installation?\u003c\/h3\u003e\n\u003cp\u003eTermitor 9007\/HB5 bulbs are made to match halogen 9007\/HB5 form factors so they fit the majority of compatible sockets without cutting or splicing. The bulbs are CANbus-ready and do not usually require external adapters, resistors, or driver boxes. Most installations are plug-and-play and can be completed in minutes using standard access points behind the headlamp assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1:1 halogen-size replacement for direct fit in most 9007\/HB5 sockets.\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play wiring — no extra driver box or complicated wiring in most vehicles.\u003c\/li\u003e\n  \u003cli\u003eHigh compatibility rate claimed to work with over 98% of 9007\/HB5 setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are the bulbs and how long will they last?\u003c\/h3\u003e\n\u003cp\u003eThese LEDs are built for extended service life and to resist typical road conditions. A long rated lifespan reduces how often you replace bulbs versus standard halogens, and IP68 sealing protects against moisture and dust ingress. The product also includes a manufacturer-backed warranty for added confidence in case of manufacturing defects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLong operating life designed to outlast conventional bulbs and lower replacement frequency.\u003c\/li\u003e\n  \u003cli\u003eIP68-rated housing for protection against water, snow, and dust exposure.\u003c\/li\u003e\n  \u003cli\u003eIncluded 1-year warranty with direct support and replacement options.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these bulbs work in all weather and driving conditions?\u003c\/h3\u003e\n\u003cp\u003eThe cool white 6500K light gives clear, high-contrast illumination useful in many conditions, from dry highways to wet roads. IP68 protection and robust construction offer resistance to vibration, moisture, and debris. As with any aftermarket lighting change, confirm local regulations and check beam aim to avoid glare to oncoming drivers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6500K tone improves detail visibility in low-light and mixed conditions.\u003c\/li\u003e\n  \u003cli\u003eWeatherproof design for rain, snow, and dusty environments.\u003c\/li\u003e\n  \u003cli\u003eEngineered to maintain stable output under typical vehicle vibrations and temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These Termitor 9007\/HB5 LED bulbs are aimed at drivers who want a high-output, maintenance-reducing upgrade from factory halogens while keeping installation simple. They suit vehicle owners with compatible 9007\/HB5 sockets who prefer a bright, daylight-colored beam, want robust weather resistance, and value plug-and-play convenience without adding external driver modules.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these bulbs a direct replacement for 9007\/HB5 halogen bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they match the 9007\/HB5 halogen form factor for direct plug-and-play installation in compatible housings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need extra adapters or drivers to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No adapters are usually required; these are designed CANbus-ready and do not need separate driver boxes for most vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55170302443863,"sku":"B0GGXPN5H1","price":68.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-9007-front-view-pack-of-2_30259609-a2c0-46e1-bc5f-91d74f2ef424.jpg?v=1790427108"},{"product_id":"termitor-h4-9003-led-headlight-bulb-6500k-daylight-90-000lm-hi-low-beam-plug-and-play-canbus-oem-fit","title":"Termitor H4\/9003 LED Headlight Bulb 6500K Daylight 90,000LM Hi\/Low Beam — Plug-and-Play CANbus, OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eTermitor H4\/9003 LED bulb delivers high\/low beam lighting with ultra-bright 90000LM output in an OEM-size, plug-and-play package.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese H4\/9003 (also known as 9003\/HB2) LED bulbs are engineered to replace standard halogen headlights and fog lamps while preserving the original bulb footprint and beam pattern. They combine multiple high-output chips, dedicated cooling, and an integrated CANbus module so you can upgrade to a cool 6500K daylight color without rewiring or bulky external drivers. Below are the typical questions drivers ask when considering this kind of LED upgrade.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these bulbs and what does that look like on the road?\u003c\/h3\u003e\n\u003cp\u003eTermitor H4\/9003 bulbs use an array of high-performance LED chips designed to produce a very intense, cool-white beam that reaches farther and spreads wider than many stock halogen bulbs. The 6500K color temperature improves contrast for road signs and lane markings at night without changing the beam’s central focus.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-chip design for broad, uniform illumination\u003c\/li\u003e\n  \u003cli\u003eCool white 6500K light to enhance visual contrast\u003c\/li\u003e\n  \u003cli\u003eEngineered to reduce dark spots and widen field of view\u003c\/li\u003e\n  \u003cli\u003eDesigned to hold a focused beam to avoid excessive glare\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my car and how difficult is installation?\u003c\/h3\u003e\n\u003cp\u003eTermitor designed these LEDs to match the 1:1 dimensions of standard H4\/9003 halogen bulbs, which means they fit most housings that accept H4\/9003 bulbs. Installation is intended to be tool-free: insert the bulb, twist to lock, and connect to the factory socket — there are no external drivers or extra wiring for most vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact halogen-size replacement for direct fit\u003c\/li\u003e\n  \u003cli\u003eAll-in-one wireless construction with no external driver\u003c\/li\u003e\n  \u003cli\u003eTypical install time under five minutes per bulb\u003c\/li\u003e\n  \u003cli\u003eFree CANbus decoders available for a few sensitive models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the bulb manage heat and durability?\u003c\/h3\u003e\n\u003cp\u003eLong-term reliability comes from an aviation-grade aluminum housing and a high-speed silent cooling fan that dissipates heat away from the LED chips. Lower operating temperatures extend component life and reduce power draw compared with older bulb technologies.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e22,000 RPM silent cooling fan for active heat control\u003c\/li\u003e\n  \u003cli\u003eAviation-grade aluminum body for fast thermal transfer\u003c\/li\u003e\n  \u003cli\u003eEnergy-saving circuitry reduces power use versus traditional bulbs\u003c\/li\u003e\n  \u003cli\u003eProjected lifespan measured in tens of thousands of hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill my vehicle’s electronics accept these bulbs?\u003c\/h3\u003e\n\u003cp\u003eTermitor H4\/9003 bulbs include an upgraded anti-flicker CANbus module intended to be compatible with most modern vehicle electronics so you shouldn’t see dashboard errors or radio interference on the majority of cars. For rare systems that remain sensitive, the manufacturer offers optional decoders to resolve compatibility issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in anti-flicker CANbus compatibility for 99% of vehicles\u003c\/li\u003e\n  \u003cli\u003eNo-polarity design reduces installation mistakes\u003c\/li\u003e\n  \u003cli\u003eIP68 rating for waterproof and dustproof performance\u003c\/li\u003e\n  \u003cli\u003eOptional external decoders provided if errors occur\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this upgrade is for: drivers who want a straightforward LED replacement that preserves original beam shape while significantly increasing visible light, people replacing burned halogens seeking easier night driving, and anyone who prefers a compact, all-in-one bulb with built-in cooling and CANbus compatibility. If you value simple installation, cooler color temperature for better contrast, and a robust, weatherproof housing, these Termitor H4\/9003 bulbs are aimed at that use case.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these H4\/9003 bulbs plug-and-play?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They match halogen size and plug into the factory socket without external drivers for most vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these bulbs work with CANbus-equipped cars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Built-in anti-flicker CANbus support covers most systems; optional decoders are available for a few sensitive models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55170302673239,"sku":"B0F9NN8FM2","price":68.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-view-bulb.jpg?v=1790427110"},{"product_id":"termitor-h11-9005-led-headlight-bulbs-combo-6500k-daylight-white-pack-of-4-1-1-oem-fit-long-life","title":"Termitor H11\/9005 LED Headlight Bulbs Combo — 6500K Daylight White, Pack of 4, 1:1 OEM Fit, Long Life","description":"\u003cp\u003e\u003cstrong\u003eTermitor’s 2026 H11\/9005 LED combo is a plug-and-play headlight kit that delivers intense 6500K daylight-white illumination in a compact 1:1 OEM form factor for direct replacement of H11, H9, H8 and HB3 bulbs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned to replace factory halogens without adapters or modifications, this four-pack pairs a high-output LED array with advanced thermal engineering to provide a crisp white beam, consistent cut-off, and extended service life. Termitor engineered the kit for easy installation, minimal electrical fuss on modern vehicles, and reliable performance in wet or dusty conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright is this LED conversion compared to stock halogens?\u003c\/h3\u003e\n\u003cp\u003eThese bulbs use multiple CSP LEDs and a focused optical layout to produce a far stronger beam than typical halogen lamps. You’ll see a whiter, more concentrated light that improves target recognition at distance without scattering glare.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated luminous package designed for high output and clear road illumination\u003c\/li\u003e\n  \u003cli\u003e6500K cool-white color for contrast against dark backgrounds\u003c\/li\u003e\n  \u003cli\u003eEngineered beam profile to maximize roadway visibility while limiting stray light\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill installation require extra parts or wiring changes?\u003c\/h3\u003e\n\u003cp\u003eThe bulbs are built to match factory bulb dimensions and connectors so most swaps are tool-free and plug-and-play. A polarity-free connector reduces installation errors, but a small number of vehicles with sensitive electronics may need a CANbus decoder.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1:1 compact dimensions to fit OEM housings without adapter rings\u003c\/li\u003e\n  \u003cli\u003eDirect plug-in electrical connector—no splicing needed\u003c\/li\u003e\n  \u003cli\u003eIncludes built-in circuitry to work with most CANbus systems; optional decoder available if requested\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the lamp keep cool and stay durable over time?\u003c\/h3\u003e\n\u003cp\u003eThermal management combines aviation-grade aluminum, a large copper heat path, dual liquid-cooling channels and a low-noise fan to move heat away from the LEDs. The weather-resistant housing and sealed electronics protect the kit from moisture and road contaminants for long-term reliability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-efficiency heat sink materials for stable operating temperatures\u003c\/li\u003e\n  \u003cli\u003eQuiet high-speed fan plus liquid channels to extend LED life\u003c\/li\u003e\n  \u003cli\u003eIP68-rated sealing for protection against water and dust intrusion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs create glare for other drivers or distortion in my beam pattern?\u003c\/h3\u003e\n\u003cp\u003eThe LED chips are arranged to replicate the filament location of original bulbs, producing a controlled beam with a defined cut-off. That careful optical alignment reduces stray light and minimizes disorienting glare for oncoming traffic when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecisely positioned light source to reproduce proper beam geometry\u003c\/li\u003e\n  \u003cli\u003eDesigned to avoid hot spots and dark zones common with poorly aligned LEDs\u003c\/li\u003e\n  \u003cli\u003eConsistent pattern helps maintain safe sightlines without blinding other drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers who want a straightforward halogen-to-LED upgrade that prioritizes intensity, a sharp beam edge, and long service life. This kit suits owners of cars and trucks using H11, H9, H8 or HB3 fittings, DIY installers who prefer tool-free swaps, and those who need robust, weatherproof lighting for regular night driving. If your vehicle is particularly picky about electrical loads, note that a small number of models may require an additional CANbus decoder—Termitor support can help determine compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these bulbs fit my H11 sockets without modification?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—Termitor bulbs are 1:1 OEM size for H11\/H9\/H8\/HB3 and usually install directly without adapters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will my car show error messages after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most vehicles report no errors thanks to onboard CANbus compatibility; a few may need a decoder to prevent warnings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55170312175959,"sku":"B0FT191PFD","price":79.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-packaging_72d9b3bf-1e82-484b-b32f-0a106f6f7f49.jpg?v=1790427423"},{"product_id":"termitor-h4-9003-led-headlight-bulbs-6500k-cool-white-plug-and-play-high-output","title":"Termitor H4\/9003 LED Headlight Bulbs 6500K Cool White — Plug-and-Play, High Output","description":"\u003cp\u003e\u003cstrong\u003eTermitor H4\/9003 LED bulbs are high-output automotive headlamps engineered to deliver dramatically brighter, longer-lasting light with a factory-fit, plug-and-play installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you want a direct aftermarket upgrade for H4\/9003 (HB2) halogen systems, the Termitor latest H4\/9003 LED delivers a focused 6500K cool white beam, advanced thermal management, and a compact driver design that mirrors the original bulb footprint. The design prioritizes beam accuracy, long life, and compatibility with modern vehicle electronics so you get better night visibility without bulky external components.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter are these bulbs compared with stock halogens?\u003c\/h3\u003e\n\u003cp\u003eThe Termitor H4\/9003 LEDs use multiple high-performance chips to produce a much stronger light output than common halogen bulbs. Brightness and color temperature combine to improve perceived clarity and distance at night.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated peak output: an industry-leading, high-lumen figure for strong illumination.\u003c\/li\u003e\n  \u003cli\u003e6500K cool white color for sharper road detail and contrast.\u003c\/li\u003e\n  \u003cli\u003eMulti-chip array for fuller beam coverage and reduced dark zones.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the beam pattern be suitable for on-road driving?\u003c\/h3\u003e\n\u003cp\u003eTermitor engineers matched the LED emitter location to the original filament position for a clean, focused beam with a clear cutoff. That alignment helps produce a wide but controlled spread that minimizes glare to oncoming drivers while improving usable roadway illumination.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUltra-thin chip substrate aligns precisely with factory bulb geometry.\u003c\/li\u003e\n  \u003cli\u003eSharp cutoff line and minimized stray light for safer night driving.\u003c\/li\u003e\n  \u003cli\u003eBalanced projection increases side coverage and distance without blinding traffic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the bulb stay cool and last longer than conventional options?\u003c\/h3\u003e\n\u003cp\u003eDurability comes from layered thermal design: direct heat pipes, a high-grade aluminum body, and a silent high-RPM fan work together to keep LED junction temperatures low. Reduced thermal stress extends the LEDs’ functional life and prevents dimming under heavy use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual copper heat pipes draw heat away from the LED source quickly.\u003c\/li\u003e\n  \u003cli\u003eAircraft-grade aluminum housing for fast conductivity and durability.\u003c\/li\u003e\n  \u003cli\u003eQuiet multi-blade fan and nano-silver thermal coating to suppress temperature rise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation, and will it work with my car’s electronics?\u003c\/h3\u003e\n\u003cp\u003eTermitor designed the H4\/9003 bulbs as a 1:1-size replacement with an integrated driver so installation is fast and tool-free. Built-in decoding and noise suppression make the bulbs compatible with most vehicle CANbus systems, though a small number of models may need an additional decoder.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play form factor—no external boxes, brackets, or special tools required.\u003c\/li\u003e\n  \u003cli\u003eIntegrated smart IC driver reduces flicker and radio interference risk.\u003c\/li\u003e\n  \u003cli\u003eOptimized linear decoding to fit over 99% of vehicles; contact support for sensitive models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you drive at night, on rural roads, or in variable weather and want a direct-fit upgrade from H4\/9003 (HB2) halogens to a high-lumen LED solution, Termitor’s latest H4\/9003 bulbs are built for drivers who value clearer road illumination, a precise beam profile, and a maintenance-reducing thermal design. They suit DIY installers who prefer a true plug-and-play swap and owners of most modern cars seeking brighter, cooler-toned light without bulky external drivers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these bulbs fit my H4\/9003 (HB2) socket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—Termitor H4\/9003 bulbs are designed as 1:1 replacements for H4\/9003 (HB2) sockets; most vehicles accept them plug-and-play.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need extra decoders or wiring adapters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most cars won’t require extras thanks to built-in decoding, but a few sensitive models may need an additional decoder—contact Termitor support if unsure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55170317287767,"sku":"B0GGGH3B7D","price":79.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-h4-9003-front-view.jpg?v=1790427655"},{"product_id":"termitor-h11-9005-led-headlight-combo-6500k-cool-white-high-low-beam-1-1-halogen-fit-ip68-waterproof","title":"Termitor H11\/9005 LED Headlight Combo — 6500K Cool White High\/Low Beam, 1:1 Halogen Fit, IP68 Waterproof","description":"\u003cp\u003e\u003cstrong\u003eTermitor's H11\/9005 LED Headlight Combo is a plug‑and‑play high\/low beam upgrade that delivers bright 6500K daylight illumination, up to 150,000LM output, and long service life in a true 1:1 halogen size.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned to replace factory halogen bulbs without trimming or adapters, this H11 and 9005 set focuses on practical brightness, durability, and broad vehicle compatibility. The kit provides a cool white beam tuned to improve contrast in low light, engineered cooling for extended runtime, and IP68 sealing so it tolerates wet and dusty roads. Below are answers to common buyer questions about fit, performance, installation, and who benefits most from this upgrade.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these bulbs change nighttime visibility?\u003c\/h3\u003e\n\u003cp\u003eThe Termitor LED combo shifts your light from yellowish halogen to crisp 6500K daylight, improving edge contrast and object definition. The broader, uniform beam pattern reduces dark spots and gives clearer peripheral coverage compared with many stock bulbs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6500K cool white for sharper contrast and clearer road detail\u003c\/li\u003e\n  \u003cli\u003eWide, uniform spread to reduce glare and dark areas\u003c\/li\u003e\n  \u003cli\u003eHigh\/low beam design maintains defined cutoff lines for legal road use\u003c\/li\u003e\n  \u003cli\u003eUp to 150,000LM combined output for stronger illumination at distance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my car, truck, or UTV without modification?\u003c\/h3\u003e\n\u003cp\u003eYes — Termitor engineered the bulbs to mirror the original halogen 1:1 dimensions so they slide into housings designed for H11 and 9005 formats. The majority of vehicles accept this plug‑and‑play form factor with no adapters or wiring changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrue 1:1 halogen size for direct fit in most housings\u003c\/li\u003e\n  \u003cli\u003eOver 99% compatibility claim for common passenger vehicles and trucks\u003c\/li\u003e\n  \u003cli\u003eStandard plugs match factory sockets—no splicing or resistors required in typical installs\u003c\/li\u003e\n  \u003cli\u003eApprox. three minutes per side install time under normal conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weatherproof are these LEDs?\u003c\/h3\u003e\n\u003cp\u003eTermitor pairs efficient thermal management with rugged sealing to deliver a long service life and dependable performance in wet or dusty conditions. The design emphasizes steady light output over extended hours and protection against environmental exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated IP68 for dust and water resistance in harsh conditions\u003c\/li\u003e\n  \u003cli\u003eLong expected life—around 85,000 hours of operation under normal use\u003c\/li\u003e\n  \u003cli\u003eOptimized heat dissipation to prevent premature brightness loss\u003c\/li\u003e\n  \u003cli\u003eSealed housings reduce fogging and internal moisture infiltration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I expect after upgrade?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard bulb replacement steps: remove the old bulb, insert the new Termitor LED, and secure the connector. Because the bulbs match halogen dimensions, most drivers can complete the swap quickly and notice immediate improvement in brightness and beam quality.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug‑and‑play connection—no special tools or lengthy procedures\u003c\/li\u003e\n  \u003cli\u003eMost installs complete in roughly three minutes per side\u003c\/li\u003e\n  \u003cli\u003eInstant visible improvement in color temperature and road coverage\u003c\/li\u003e\n  \u003cli\u003eWorks in both high and low beam configurations where H11\/9005 bulbs are used\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who want a straightforward, high‑output lighting upgrade without modifying their vehicle will benefit most. This kit suits commuters, night‑time travelers, off‑roaders in UTVs and SUVs, and anyone replacing failing halogen bulbs who values longer life, strong wet‑weather performance, and a bright 6500K beam. If you need enhanced visibility with a low‑hassle installation and rugged weather sealing, the Termitor H11\/9005 LED combo is built for that role.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these replace both H11 and 9005 bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This kit includes H11 and 9005-sized LED bulbs designed to replace matching halogen sockets; choose the correct socket size for each light location.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will they work in rainy or snowy conditions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—IP68 sealing protects against water and dust, maintaining reliable output in rain, snow, and road spray.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55170318729559,"sku":"B0FZVYH9W1","price":79.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-view-packed-bulbs.jpg?v=1790427704"},{"product_id":"termitor-smart-h4-led-fog-light-bulbs-pack-of-2-75-000-lm-app-controlled-dimming-3000k-6500k-color-temp","title":"Termitor Smart H4 LED Fog Light Bulbs Pack of 2 — 75,000 LM, App-Controlled Dimming \u0026 3000K–6500K Colour Temp","description":"\u003cb\u003eTermitor Smart H4 Light Bulbs are app-controlled, plug-and-play LED fog lights that deliver up to 75,000 lumens, adjustable color temperature (3000K–6500K), and factory-style beam control for safe driving visibility.\u003c\/b\u003e\n\nThese H4\/9003\/HB2 bulbs replace standard halogens with a compact, high-output LED solution that fits most vehicles without extra wiring. The bulbs pair with a mobile app over Bluetooth to change brightness, shift color temperature from warm yellow to cool white, and select pre-set driving modes for different weather. Built from aerospace-grade materials with active cooling and IP68 sealing, they are designed for long service life and reliable performance in real-world conditions.\n\n\u003ch3\u003eHow bright and adjustable are these bulbs?\u003c\/h3\u003e\n\u003cp\u003eThese LEDs reach peak outputs many times brighter than typical halogen bulbs and let you fine-tune light level and tone from your phone. Brightness can be dimmed smoothly or pushed to maximum when extra illumination is needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum output up to 75,000 LM (model range)\u003c\/li\u003e\n  \u003cli\u003eStepless dimming from 0% to 100% via app\u003c\/li\u003e\n  \u003cli\u003eColor temperature range 3000K (warm yellow) to 6500K (cool white)\u003c\/li\u003e\n  \u003cli\u003ePre-set modes for sunny, rainy, foggy, and snowy conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs glare other drivers or change my headlight beam pattern?\u003c\/h3\u003e\n\u003cp\u003eTermitor H4 bulbs are engineered to reproduce a precise beam cutoff similar to factory halogen reflectors, concentrating light on the road while minimizing glare. Proper alignment and the bulb’s optical design help keep illumination focused where it’s most useful.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSharp, factory-compliant cutoff line for safer night driving\u003c\/li\u003e\n  \u003cli\u003eOptimized LED chip placement to match halogen beam geometry\u003c\/li\u003e\n  \u003cli\u003eReduced scatter to avoid dazzling oncoming traffic\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and vehicle compatibility?\u003c\/h3\u003e\n\u003cp\u003eThe bulbs are designed for direct replacement—no external drivers, resistors, or extra wiring in most vehicles. They are compact and shaped to match original halogen dimensions so they fit into housing and dust covers in nearly all applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play H4\/9003\/HB2 form factor, installs in minutes\u003c\/li\u003e\n  \u003cli\u003eAbout 20% smaller than many aftermarket LEDs for easier fit\u003c\/li\u003e\n  \u003cli\u003eBuilt-in CANBUS compatibility for flicker-free operation on most vehicles\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle manual or existing bulb size for final confirmation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are the bulbs and what cooling do they use?\u003c\/h3\u003e\n\u003cp\u003eTermitor bulbs employ aerospace-grade aluminum and an active turbo fan to manage heat so the LEDs remain stable for years. IP68 sealing and a durable rubber gasket protect the unit from water and dust exposure commonly encountered on the road.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHollow heat-sink and 22,000 RPM turbo fan for efficient cooling\u003c\/li\u003e\n  \u003cli\u003eAerospace-grade aluminum housing for structural strength\u003c\/li\u003e\n  \u003cli\u003eIP68 waterproof and dustproof rating with anti-aging seal\u003c\/li\u003e\n  \u003cli\u003eEstimated long-life operation measured in tens of thousands of hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\nThis pack of two Termitor Smart H4 bulbs is ideal for drivers who want a direct halogen replacement that improves night visibility, offers flexible color and brightness control from a phone, and keeps a factory-style beam. Choose these if you need quick, tool-free installation, CANBUS compatibility for modern vehicles, and rugged design for varied weather and road conditions.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these Termitor H4 bulbs need extra wiring or drivers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, they are plug-and-play with built-in drivers for most vehicles; no external resistors needed in typical installs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I change the light color and brightness?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—use the Bluetooth app to adjust brightness from 0–100% and switch color temperature between 3000K and 6500K.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55170335277399,"sku":"B0GF7V3XPX","price":76.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-of-bulb-pair.jpg?v=1790428089"},{"product_id":"termitor-9007-hb5-led-bulbs-pack-of-2-6500k-cool-white-1-1-halogen-fit-with-active-cooling","title":"Termitor 9007\/HB5 LED Bulbs Pack of 2 — 6500K Cool White, 1:1 Halogen Fit with Active Cooling","description":"\u003cp\u003e\u003cstrong\u003eTermitor 9007\/HB5 LED bulbs are a plug-and-play high-output replacement that delivers crisp 6500K cool-white illumination, halogen-size fit, and active cooling for long-lasting performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese upgraded 9007\/HB5 LED bulbs from Termitor are built to replace standard halogen lamps without modifying your headlight housing. With a compact 1:1 halogen footprint, built-in CANBUS decoding, and a high-speed cooling fan inside aerospace-grade aluminum, they aim to combine bright, focused light with long life and simple installation. Below you’ll find clear answers to the most common questions buyers have, plus concrete specs to help you decide if these bulbs are right for your vehicle.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter are these bulbs compared to stock halogens?\u003c\/h3\u003e\n\u003cp\u003eTermitor’s 9007\/HB5 LEDs use 24 high-performance chips to produce up to 15× the brightness of conventional halogen bulbs, delivering a crisp, cool-white beam that improves forward visibility. The measured color temperature is 6500K, which creates a neutral-to-cool light ideal for contrast and lane definition.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOutput: up to 100,000LM per pair (spec depends on application and housing)\u003c\/li\u003e\n  \u003cli\u003eColor temperature: 6500K cool white for sharper detail\u003c\/li\u003e\n  \u003cli\u003eChip count: 24 high-performance LED chips per bulb\u003c\/li\u003e\n  \u003cli\u003eBrightness improvement: up to 15× vs stock halogen in similar housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and cause error codes?\u003c\/h3\u003e\n\u003cp\u003eThe bulbs are designed with a true 1:1 halogen-size base and a non-polarized plug to fit directly into most factory sockets. Built-in CANBUS compatibility reduces flicker and dash errors for more than 99% of vehicles; however, always confirm bulb size with your owner’s manual or original part number.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForm factor: 1:1 halogen-size mini design (fits standard 9007\/HB5 slots)\u003c\/li\u003e\n  \u003cli\u003eCompatibility: CANBUS integrated to prevent flicker and errors\u003c\/li\u003e\n  \u003cli\u003eInstallation: plug-and-play—no cutting or splicing in most cases\u003c\/li\u003e\n  \u003cli\u003eNote: some vehicle models may still require a decoder—contact Termitor if needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is heat managed and what is the expected lifespan?\u003c\/h3\u003e\n\u003cp\u003eTermitor uses aerospace-grade aluminum with a hollow-carved structure and a 22,000 RPM turbo cooling fan to dissipate heat efficiently. The design plus IP68-rated sealing and an anti-aging rubber ring provides durable protection against dust and moisture, targeting long operational life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCooling: 22,000 RPM turbo fan integrated into compact body\u003c\/li\u003e\n  \u003cli\u003eMaterials: aerospace-grade aluminum for rapid heat transfer\u003c\/li\u003e\n  \u003cli\u003eProtection: IP68 waterproof and dustproof sealing\u003c\/li\u003e\n  \u003cli\u003eLifespan: rated up to approximately 85,000 hours under ideal conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation, and what does plug-and-play really mean?\u003c\/h3\u003e\n\u003cp\u003eThe bulbs are engineered to drop into factory housings and sockets without modifications, allowing most installs to be completed in about three minutes. Non-polarized connectors and the halogen-size base eliminate the need for extra brackets or large drivers that interfere with vehicle covers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTime: average install about 3 minutes per bulb\u003c\/li\u003e\n  \u003cli\u003eDesign: compact, non-polarized plug fits standard 9007\/HB5 sockets\u003c\/li\u003e\n  \u003cli\u003eNo extras: no large external drivers or adapters required in most installations\u003c\/li\u003e\n  \u003cli\u003eSupport: Termitor customer help available if a decoder or guidance is needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These Termitor 9007\/HB5 LED bulbs are aimed at drivers and powersports riders who want a bright, whiter beam with a halogen-like fit and easy installation. They suit owners replacing aging yellow halogens, commuters wanting improved night visibility, and enthusiasts seeking a compact LED solution compatible with most vehicle electronics. If you need a high-output, long-life LED that installs without housing modification and reduces dash errors, these bulbs are designed for your application.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these 9007\/HB5 LEDs fit my headlight without modifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they use a 1:1 halogen-size base and a non-polarized plug for direct replacement in most 9007\/HB5 housings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I see error codes or flickering on modern vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most vehicles are compatible thanks to built-in CANBUS decoding, but a small number may need a decoder—contact Termitor if issues occur.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55171114041687,"sku":"B0FDGN917D","price":90.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-9007-hb5-front-view-pack-of-2.jpg?v=1790438299"},{"product_id":"termitor-led-headlight-bulbs-h11-h9-h8-9005-hb3-pack-of-4-6500k-canbus-ready","title":"Termitor LED Headlight Bulbs H11\/H9\/H8 \u0026 9005\/HB3 Pack of 4 — 6500K, CANbus-Ready","description":"\u003cp\u003e\u003cstrong\u003eTermitor New-Gen H11\/H9\/H8 and 9005\/HB3 LED bulbs are plug-and-play automotive headlight replacements that deliver extremely bright 6500K light, OEM-sized beam control, and long service life.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese four-pack LED bulbs combine ultra-high lumen output, a compact 1:1 form factor and CANbus-ready electronics so you can replace halogen H11 and 9005 bulbs without major wiring changes. Built for durability and ease, they offer an engineered beam pattern and active thermal management to keep light stable and housings cool. They’re aimed at drivers who want a brighter, clearer white beam while keeping factory fit and minimizing glare for others on the road.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter are these LEDs compared with stock halogen bulbs?\u003c\/h3\u003e\n\n\u003cp\u003eThese Termitor LEDs advertise a dramatic increase in luminous output, producing up to 170,000 lumens total from the pack with a 2000% increase over common halogen units. The color temperature is a crisp 6500K white, which helps improve contrast in low-light and foggy conditions without changing your headlight aim.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e170,000LM combined brightness across the set\u003c\/li\u003e\n  \u003cli\u003e2000% higher output versus typical halogens\u003c\/li\u003e\n  \u003cli\u003e6500K cool-white color for clearer nighttime visibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs fit my vehicle and work without extra modules?\u003c\/h3\u003e\n\n\u003cp\u003eThe bulbs are designed to match factory halogen size with a real 1:1 OEM mini footprint, allowing installation in many stock housings and dust-cover setups. They include integrated drivers and an enhanced CANbus system for broad compatibility, but very sensitive electrical systems may still need a decoder or capacitor to eliminate error codes.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect plug-and-play installation—no external drivers required\u003c\/li\u003e\n  \u003cli\u003eCompact profile fits most factory housings and dust covers\u003c\/li\u003e\n  \u003cli\u003eCANbus-ready; support available if a decoder is necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is heat managed and how long will these bulbs last?\u003c\/h3\u003e\n\n\u003cp\u003eTermitor engineered an advanced cooling solution—combining efficient heat dissipation materials with integrated fans—to keep junction temperatures lower and maintain consistent output. That thermal control contributes to an extended operational life that the listing estimates in the tens of thousands of hours under normal use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eActive cooling system for stable performance\u003c\/li\u003e\n  \u003cli\u003ePremium construction aimed at long service life (advertised up to 85,000 hours)\u003c\/li\u003e\n  \u003cli\u003eStable light output over extended driving periods\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat beam pattern and safety features do these bulbs provide?\u003c\/h3\u003e\n\n\u003cp\u003eWith a 1:1 design that mirrors halogen geometry, these LEDs aim to reproduce a focused beam and a defined cutoff to illuminate the road ahead while minimizing glare for oncoming drivers. The compact LED array and optimized angle work to deliver wider lateral spread and better distance without scattering light inefficiently.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOEM-sized beam profile for accurate cutoff\u003c\/li\u003e\n  \u003cli\u003eFocused output to reduce glare to other drivers\u003c\/li\u003e\n  \u003cli\u003eWider and farther illumination for improved road coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These bulbs suit drivers who want a straightforward upgrade from halogen to high-output LEDs while keeping factory fitment—commuters, night-shift drivers, and anyone who frequently drives in low-visibility conditions. Technically inclined buyers who may own late-model vehicles with sensitive electronics should be aware that a CANbus decoder could occasionally be required; Termitor’s support team can assist with compatibility questions and installation guidance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these bulbs truly plug-and-play?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they install like halogen bulbs with built-in drivers. Some sensitive vehicle systems may need a CANbus decoder.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What color temperature do these LEDs produce?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They emit a cool white 6500K tint, designed for crisp contrast and clearer night visibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55171126853975,"sku":"B0FVFXNGZ7","price":96.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-view-pack-of-4.jpg?v=1790438745"},{"product_id":"termitor-d1s-fog-light-bulbs-pack-of-2-6500k-pure-white-high-output-ip68","title":"Termitor D1S Fog Light Bulbs Pack of 2 — 6500K Pure White, High-Output \u0026 IP68","description":"\u003cp\u003e\u003cstrong\u003eTermitor 2026 D1S fog light bulbs are a high-output, plug-and-play pair that deliver intense 6500K pure white illumination with OEM fit and IP68 weather protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese D1S bulbs are built to replace factory xenon or HID fog lights with a brighter, whiter beam while matching the original dimensions for a true plug-and-play swap. The set of two is engineered for quick installation, long life, and consistent color and output across both sides. Below you'll find concise answers to common buyer questions plus concrete details you can use when comparing options.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these bulbs and what color will they produce?\u003c\/h3\u003e\n\u003cp\u003eThese Termitor D1S bulbs deliver an intense light output and a cool, daylight-style color temperature. The 6500K tone produces a crisp pure white beam that enhances contrast and visual clarity without adding yellow tint.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated brightness: extremely high output for improved visibility\u003c\/li\u003e\n  \u003cli\u003eColor temperature: 6500K pure white for accurate color rendition\u003c\/li\u003e\n  \u003cli\u003eMatched pair: both bulbs share identical color and intensity\u003c\/li\u003e\n  \u003cli\u003eDesigned to reduce glare for clearer road detail\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and how hard is installation?\u003c\/h3\u003e\n\u003cp\u003eTermitor designed the D1S bulbs to match original equipment dimensions for a 1:1 fit, so they plug into HID housings just like the factory units. Installation is straightforward and can typically be completed in minutes with no modifications to wiring or mounts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1:1 OEM fitment: matches original D1S dimensions and connectors\u003c\/li\u003e\n  \u003cli\u003eStock-sized: fits into factory fog light housings without trimming\u003c\/li\u003e\n  \u003cli\u003e3-minute setup: quick plug-and-play swap for most vehicles\u003c\/li\u003e\n  \u003cli\u003eNo extra drivers or adapters required in most installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these bulbs in bad weather and long-term use?\u003c\/h3\u003e\n\u003cp\u003eThese bulbs are built for harsh conditions and extended service life. An IP68 waterproof rating protects against dust and immersion, while internal design choices prioritize durability so the bulbs remain reliable over years of use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP68 waterproofing: sealed against dust and temporary submersion\u003c\/li\u003e\n  \u003cli\u003eAll-weather reliability: resists rain, snow, and road spray\u003c\/li\u003e\n  \u003cli\u003eLong lifespan: engineered for multi-year service life\u003c\/li\u003e\n  \u003cli\u003eSturdy construction: reduces the need for frequent replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the pack and why buy two at once?\u003c\/h3\u003e\n\u003cp\u003eThis product ships as a matched pair of D1S bulbs so both fog lights share identical color and output from day one. Buying a dual pack ensures balanced illumination and avoids mismatched tone or brightness between left and right lights.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes two D1S bulbs: complete set for both fog lights\u003c\/li\u003e\n  \u003cli\u003eMatched performance: consistent beam pattern and color\u003c\/li\u003e\n  \u003cli\u003eValue pack: replaces both bulbs simultaneously for uniform results\u003c\/li\u003e\n  \u003cli\u003eIdeal for upgrades and coordinated replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers who want a straightforward upgrade from factory fog bulbs to a brighter, daylight-toned D1S option will appreciate Termitor's plug-and-play approach. This pair suits vehicle owners looking for stronger contrast and longer service life without custom wiring or housing changes—especially those who frequently drive in low-light, wet, or variable-weather conditions and need dependable, matched illumination.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these D1S bulbs require an adapter or extra driver?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—Termitor D1S bulbs are 1:1 OEM fit designed for plug-and-play installation without additional adapters in most vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these bulbs road-legal in all regions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Regulations vary by location; check local vehicle lighting laws before installation to ensure compliance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55171129835863,"sku":"B0GMQ837DD","price":81.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-d1s-front-packaging.jpg?v=1790438822"},{"product_id":"termitor-9012-hir2-led-fog-light-bulbs-pack-of-2-6500k-ultra-bright-compact-plug-and-play","title":"Termitor 9012\/HIR2 LED Fog Light Bulbs Pack of 2 — 6500K Ultra-Bright, Compact Plug-and-Play","description":"\u003cp\u003e\u003cstrong\u003eTermitor 9012\/HIR2 fog light bulbs are a pair of high-output 6500K LED replacements engineered to produce ultra-bright, focused road illumination while fitting factory housings without extra drivers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Termitor 9012\/HIR2 bulbs upgrade standard fog or low-beam lighting with a compact, all-in-one LED module that delivers crisp cool-white light and adjustable beam aiming. Designed for simple swap-in installation, the lamps combine a high-efficiency chip layout, active cooling, and weatherproof sealing so you get dramatic visibility gains without complex wiring or bulky external components.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter are these bulbs compared to stock lights?\u003c\/h3\u003e\n\n\u003cp\u003eTermitor's 9012\/HIR2 bulbs use 16 high-performance illumination chips to reach a very high lumen output and a crisp 6500K color temperature. They are promoted as substantially brighter than standard halogen bulbs, offering clearer road definition and whiter light for improved contrast at night.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRated up to 110,000LM total system output for the pair.\u003c\/li\u003e\n  \u003cli\u003e6500K cool-white color for neutral, daylight-style beam tone.\u003c\/li\u003e\n  \u003cli\u003eClaimed 10–15x brighter visual effect versus many OEM halogens.\u003c\/li\u003e\n  \u003cli\u003eImproved light transmission and sharper hotspot for road edges.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs fit my vehicle and how hard is installation?\u003c\/h3\u003e\n\n\u003cp\u003eTermitor 9012\/HIR2 bulbs are built with a 1:1 compact profile to match many factory fog-light housings and dust covers, eliminating the need for extra driver boxes. Installation is typically a quick swap using the included wrench to set the locking ring and adjust aiming; most users report completing the job in about three minutes per side.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTrue compact form factor replaces stock 9012\/HIR2 bulbs directly.\u003c\/li\u003e\n  \u003cli\u003eNo external driver box—single integrated assembly for tight spaces.\u003c\/li\u003e\n  \u003cli\u003eIncludes wrench for 360° adjust buckle to control beam direction.\u003c\/li\u003e\n  \u003cli\u003eRecommend verifying bulb size with your vehicle manual before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the bulb manage heat and durability for long life?\u003c\/h3\u003e\n\n\u003cp\u003eThe bulbs use aerospace-grade aluminum with hollow-carved fins and a high-speed 22,000 RPM turbo cooling fan to dissipate heat efficiently, extending LED lifespan. High-quality sealing rings protect internal components from moisture and dust, supporting long-term reliability in varied driving conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRobust thermal management with active cooling fan.\u003c\/li\u003e\n  \u003cli\u003eHardened aerospace-grade aluminum housing for heat transfer.\u003c\/li\u003e\n  \u003cli\u003eAnti-aging sealing rings for waterproof and dustproof protection.\u003c\/li\u003e\n  \u003cli\u003eDesigned service life: approximately 90,000+ hours under normal use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these bulbs compatible with my car's electronics and safety systems?\u003c\/h3\u003e\n\n\u003cp\u003eTermitor includes advanced CANbus drivers that are compatible with most modern vehicles to reduce flicker and decoding errors. While the drivers work with over 95% of applications, manufacturers note that online vehicle fitment tools may be imperfect, so check your original bulb part number for best results.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt-in CANbus drivers to minimize warning signals and flicker.\u003c\/li\u003e\n  \u003cli\u003eWorks with the majority of vehicles, but exceptions can occur.\u003c\/li\u003e\n  \u003cli\u003eIf uncertain, cross-check with your owner's manual or original bulb part number.\u003c\/li\u003e\n  \u003cli\u003eNo promise of legal compliance in all jurisdictions—follow local lighting regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Termitor 9012\/HIR2 pair suits drivers who want a high-output fog or low-beam replacement that improves nighttime clarity without complex installation. It's aimed at vehicle owners comfortable confirming bulb fitment and who prioritize powerful, daylight-toned illumination, robust cooling, and a sealed design for long service life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do Termitor 9012\/HIR2 bulbs require an external driver box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These bulbs are all-in-one units with integrated CANbus drivers, so no separate driver box is needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm the 9012\/HIR2 will fit my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your owner's manual or the original bulb part number; online fitment tools can be inaccurate.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55171131507031,"sku":"B0F183TM8G","price":79.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-9012-front-view-pack-of-2.jpg?v=1790438845"},{"product_id":"termitor-9012-hir2-16x-ultra-bright-fog-light-bulbs-6500k-mini-1-1-fit-adjustable-beam","title":"Termitor 9012\/HIR2 16x Ultra-Bright Fog Light Bulbs 6500K Mini 1:1 Fit, Adjustable Beam","description":"\u003cp\u003e\u003cstrong\u003eTermitor 9012\/HIR2 fog light bulbs are compact, plug-and-play 16x ultra-bright 6500K LED replacements designed to deliver crisp, focused light while fitting directly into factory fog housings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese bulbs combine a small 1:1 form factor with a high-output LED array, advanced thermal management, and an adjustable mounting buckle so you can align the beam precisely. They are built for vehicles that require a direct-replacement 9012\/HIR2 bulb but want a dramatic boost in nighttime visibility without bulky drivers or complex wiring.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter are these Termitor bulbs compared with stock fog lamps?\u003c\/h3\u003e\n\u003cp\u003eTermitor’s 9012\/HIR2 model uses 16 advanced light chips to produce a very high lumen output and a cool 6500K color temperature for greater perceived brightness and road contrast. The design focuses light through a sharp cutoff to reduce scatter and glare when properly aimed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated brightness up to 120,000LM peak per set (high-performance array effect).\u003c\/li\u003e\n  \u003cli\u003e16X enhanced light output versus typical halogen fog bulbs.\u003c\/li\u003e\n  \u003cli\u003e6500K cool white beam for improved visual clarity on dark roads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I aim and install the bulbs to avoid glare or uneven beams?\u003c\/h3\u003e\n\u003cp\u003eInstallation is simple: the bulbs are built to a 1:1 size that fits factory housings and dust covers, eliminating the need for external drivers. The included wrench lets you rotate the 360° adjustable buckle so the LED chips align correctly with your fog housing optics to create a clean cutoff and prevent stray glare.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play: no extra wiring or driver boxes required.\u003c\/li\u003e\n  \u003cli\u003eAdjustable locking ring lets you fine-tune beam orientation.\u003c\/li\u003e\n  \u003cli\u003eCompact body fits tight housings and original dust covers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs work with my vehicle’s electronics and weather conditions?\u003c\/h3\u003e\n\u003cp\u003eTermitor integrates CANbus-compatible circuitry to reduce the chance of dashboard errors and flicker on most modern vehicles. The bulbs are constructed from aviation-grade aluminum, sealed against moisture, and cooled with a high-RPM fan so they resist overheating and perform in harsh climates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in CANbus design for broad ECU compatibility.\u003c\/li\u003e\n  \u003cli\u003eDurable aviation aluminum body and weather-resistant seals.\u003c\/li\u003e\n  \u003cli\u003e22,000 RPM turbo fan and hollow heat-sink for long life up to 90,000 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical benefits will I notice after upgrading to Termitor 9012\/HIR2 bulbs?\u003c\/h3\u003e\n\u003cp\u003eExpect more consistent illumination across the road surface, quicker recognition of hazards at night, and less light scatter that can blind oncoming drivers when aimed correctly. The compact design keeps installation quick while preserving factory housing geometry and dust protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSharper road definition for safer night driving.\u003c\/li\u003e\n  \u003cli\u003eLower profile installation with no external modules to hide.\u003c\/li\u003e\n  \u003cli\u003eExtended runtime and reliable cooling reduce maintenance frequency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These Termitor 9012\/HIR2 bulbs are ideal for drivers who want a high-output, factory-fit upgrade to their fog or auxiliary lights without modifying housings or wiring. They suit owners of cars and trucks that accept 9012\/HIR2 bulbs and who prioritize brighter, whiter illumination, easy installation, and robust thermal protection for long-term use. Before buying, confirm your vehicle’s original bulb part number or consult your manual to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are Termitor 9012\/HIR2 bulbs plug-and-play?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They match the 1:1 size of stock bulbs and install without extra drivers or wiring in compatible housings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these bulbs cause dashboard error codes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most vehicles avoid errors due to the integrated CANbus design, but verify fitment with your vehicle model first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55171151462743,"sku":"B0GH7BJNJ9","price":90.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-packaging-9012-hir2.jpg?v=1790439286"},{"product_id":"termitor-d3s-led-replacement-bulbs-6500k-cool-white-pack-of-2-10-brighter-ip68-waterproof","title":"Termitor D3S LED Replacement Bulbs 6500K Cool White, Pack of 2 — 10× Brighter, IP68 Waterproof","description":"\u003cstrong\u003eTermitor D3S High Performance HID bulbs are plug-and-play replacement lamps that deliver a crisp 6500K cool-white beam with up to 10× more visible light and long-life reliability for off-road and street use.\u003c\/strong\u003e\n\n\u003cp\u003eIf you drive in low-light conditions or want to upgrade your vehicle's factory D3S headlamps, these Termitor bulbs are designed to boost visibility, preserve beam pattern, and fit directly into most OEM housings. Built for durability, they pair a compact 1:1 form factor with enhanced cooling and waterproofing so you get brighter light without complex modifications.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter are these bulbs compared with stock D3S lamps?\u003c\/h3\u003e\n\u003cp\u003eThe Termitor D3S bulbs use 24 high-output chips to increase perceived brightness and clarity compared to many standard D3S lamps. You’ll notice improved road illumination and contrast, especially at the edges of the beam, making road markings and obstacles easier to see.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated up to 10× brighter in visual output compared to common OEM units\u003c\/li\u003e\n  \u003cli\u003e6500K cool white color for a crisp, daylight-like appearance\u003c\/li\u003e\n  \u003cli\u003e24 high-performance LED chips delivering broad, even coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these install easily and keep the OEM beam pattern?\u003c\/h3\u003e\n\u003cp\u003eYes — the bulbs are designed with a true 1:1 mini footprint so they slide into most D3S housings without adapters. The compact housing maintains the correct lamp position to preserve the original beam cutoff and reduce glare toward oncoming traffic.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect plug-and-play 1:1 form factor — no extra adapters required\u003c\/li\u003e\n  \u003cli\u003eInstallation typically takes under three minutes per side\u003c\/li\u003e\n  \u003cli\u003ePrecision-focused optics aim to keep a sharp cutoff and defined beam edges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are Termitor D3S bulbs for off-road and wet conditions?\u003c\/h3\u003e\n\u003cp\u003eThese bulbs are constructed from aerospace-grade aluminum and a hollow-carved heatsink for rapid heat dispersion. An integrated high-speed cooling fan and IP68-rated sealing protect the units from dust and water, supporting long-term performance in harsh conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAerospace-grade aluminum body with advanced cooling fan (22,000 RPM)\u003c\/li\u003e\n  \u003cli\u003eIP68 waterproof and dustproof sealing for wet and dusty environments\u003c\/li\u003e\n  \u003cli\u003eAnti-aging rubber ring for added protection and longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicle compatibility and electrical considerations should I know?\u003c\/h3\u003e\n\u003cp\u003eTermitor includes advanced CBNBUS drivers to minimize flicker and decoding errors across a wide range of modern vehicles. However, vehicle fitment tools may be imperfect, so always confirm your bulb type with the owner's manual or the original bulb part number before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCBNBUS drivers compatible with over 95% of vehicles to reduce flicker\u003c\/li\u003e\n  \u003cli\u003eVerify D3S size with your vehicle manual or OEM part number\u003c\/li\u003e\n  \u003cli\u003eMay require CANbus or decoder in rare vehicle systems — check before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who want a straightforward, high-quality upgrade from factory D3S lamps — particularly off-road enthusiasts, commuters who drive at night, and anyone seeking a plug-and-play solution that preserves beam pattern while offering cooler, brighter illumination. If you need a long-lasting, weather-resistant D3S replacement with fast installation and wide vehicle compatibility, the Termitor D3S bulbs are built for that role.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these Termitor D3S bulbs plug-and-play?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They use a true 1:1 mini design for direct installation without adapters in most D3S housings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need extra decoders or CANbus modules?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most vehicles work with the included CBNBUS drivers, but some models may still require a decoder—verify before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55171151659351,"sku":"B0GMBFV6Q9","price":90.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-d3s-front-view_44a0c2a4-3761-4153-a8bb-9bd5aed65278.jpg?v=1790439285"},{"product_id":"termitor-h7-led-fog-light-bulbs-6500k-mini-1-1-fit-pack-of-2-ultra-bright-plug-and-play","title":"Termitor H7 LED Fog Light Bulbs 6500K Mini 1:1 Fit Pack of 2 — Ultra Bright, Plug‑and‑Play","description":"\u003cp\u003e\u003cstrong\u003eTermitor 7th‑Gen H7 6500K bulbs are ultra‑bright plug‑and‑play replacements that deliver a focused, white beam and long service life without adapters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese compact H7 LED bulbs are engineered to match the original bulb footprint while producing far more light than stock halogens. With a cool 6500K color temperature, precision chip alignment and a small 1:1 form factor, they fit most H7 housings and aim to improve visibility during low‑light driving. The design emphasizes a correct beam cut‑off to avoid glare and an improved thermal system for extended runtime.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these bulbs improve nighttime visibility?\u003c\/h3\u003e\n\u003cp\u003eThe Termitor H7 bulbs use 18 high‑output CSP chips arranged to reproduce the filament location, producing a clean, forward‑focused beam that reaches farther than typical halogens. The 6500K color helps contrast road signs and lane markings under many conditions without appearing overly blue.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUp to 1400% brighter output versus many stock bulbs.\u003c\/li\u003e\n  \u003cli\u003ePrecisely aligned chips for a controlled light pattern and reduced dark spots.\u003c\/li\u003e\n  \u003cli\u003e6500K cool white light for clearer contrast on road surfaces and signs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these H7 LEDs fit my vehicle and install easily?\u003c\/h3\u003e\n\u003cp\u003eTermitor designed these as a true 1:1 mini size so they fit into most H7 sockets without adapters or housing modification. Installation is plug‑and‑play with non‑polarity wiring on most vehicles; in rare cases a CANbus decoder may be needed to prevent error codes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact 1:1 form factor matches original bulb dimensions.\u003c\/li\u003e\n  \u003cli\u003eNon‑polarity, plug‑and‑play connection for quick swaps.\u003c\/li\u003e\n  \u003cli\u003eEnhanced CANbus compatibility covering about 99% of vehicles; support available if a decoder is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these bulbs and how do they manage heat?\u003c\/h3\u003e\n\u003cp\u003eTermitor combines aviation‑grade aluminum, an oversized copper base and dual liquid‑cooled tubes with a silent high‑speed fan to control temperature for sustained brightness. The IP68 rating helps resist moisture and dust, and the engineered cooling aims to extend effective lifespan well beyond typical LEDs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOver 75,000 hours estimated life with advanced thermal architecture.\u003c\/li\u003e\n  \u003cli\u003e22,000 RPM silent fan plus dual liquid cooling for consistent output.\u003c\/li\u003e\n  \u003cli\u003eIP68 waterproof rating for reliable performance in wet conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the beam avoid blinding other drivers?\u003c\/h3\u003e\n\u003cp\u003eThe chips are positioned to replicate the original filament location, which creates a sharper cut‑off and focused hotspot rather than scattering light. That engineered beam pattern reduces glare, keeps dark zones minimized and aims to present oncoming traffic with less direct glare than poorly aligned LED conversions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFilament‑positioned CSP chips for accurate cutoff and hotspot.\u003c\/li\u003e\n  \u003cli\u003eReduced scatter and minimized glare to protect other drivers’ vision.\u003c\/li\u003e\n  \u003cli\u003eConsistent beam shape across both bulbs for even illumination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who want a high‑output, compact H7 LED upgrade that fits like a stock bulb and focuses on a correct beam pattern. Ideal for owners of vehicles with H7 fog or low‑beam sockets seeking a whiter, farther‑reaching light with long life and robust weather resistance. If your car is CANbus‑sensitive, Termitor’s enhanced compatibility covers most models, and support is available for any install questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these H7 bulbs need adapters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—Termitor H7 bulbs use a true 1:1 mini size that fits most H7 sockets without adapters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will my car show error codes after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They’re CANbus‑enhanced for 99% compatibility; a decoder may be needed on a few models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55171195076951,"sku":"B0GDZCYXDN","price":90.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-h7-front-view-pack-of-2_c5cb8e02-a2bd-4bbd-b4f6-dbfccadc5b60.jpg?v=1790440348"},{"product_id":"termitor-h11-9005-led-bulbs-combo-4-pack-6500k-white-1-1-mini-size-plug-and-play","title":"Termitor H11 9005 LED Bulbs Combo 4-Pack — 6500K White, 1:1 Mini Size, Plug-and-Play","description":"\u003cp\u003e\u003cstrong\u003eTermitor H11 9005 LED Bulbs Combo delivers ultra-bright 6500K white light in a compact 1:1 design for direct, plug-and-play replacement of stock H11 and 9005 bulbs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Termitor bulbs are designed to upgrade your vehicle's low- and high-beam and fog lighting with a focused beam, long service life, and a compact footprint that fits most modern headlamp housings without modification. With aviation-grade materials, advanced heat management, and built-in CANbus compatibility, this 4-piece set aims to make brighter, clearer night driving simple and reliable.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter are these bulbs compared with standard halogens?\u003c\/h3\u003e\n\u003cp\u003eTermitor’s LEDs use 16 high-output CSP chips per bulb to dramatically increase lumen output while maintaining a clean color temperature. You get a sharp white beam that helps illuminate road markers and hazards farther than typical halogens without altering the original beam geometry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated output: up to 210000LM across the combo set.\u003c\/li\u003e\n  \u003cli\u003ePer-bulb improvement: marketed as up to 1600% brighter than stock halogen bulbs.\u003c\/li\u003e\n  \u003cli\u003eColor temperature: 6500K cool white for clearer contrast at night.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs fit my car and is installation difficult?\u003c\/h3\u003e\n\u003cp\u003eThese LEDs are engineered in a true 1:1 mini size to match the physical dimensions and filament position of factory H11 and 9005 bulbs, reducing clearance and focus issues inside the headlamp assembly. Installation is plug-and-play with non-polarity wiring for most vehicles, so you can swap bulbs without tools or extra wiring in most cases.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForm factor: genuine 1:1 size to match OEM housings.\u003c\/li\u003e\n  \u003cli\u003eWiring: non-polarity, plug-and-play connectors for quick swap.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: advertised as working with 99% of vehicles; some models may require a CANbus decoder.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these bulbs manage heat and durability?\u003c\/h3\u003e\n\u003cp\u003eLong life is a priority: Termitor builds these bulbs with aviation-grade aluminum, an oversized copper base, and dual liquid-cooled tubes to move heat away from the LEDs. An ultra-fast silent fan and IP68 waterproof rating further protect internal components for sustained use in wet or dusty conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCooling: dual liquid-cooled tubes plus 22,000 RPM silent fan.\u003c\/li\u003e\n  \u003cli\u003eMaterials: aviation-grade aluminum and oversized copper base for improved thermal conductivity.\u003c\/li\u003e\n  \u003cli\u003eLifespan: engineered for over 70,000 hours of operation under normal conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs cause dashboard errors or blind other drivers?\u003c\/h3\u003e\n\u003cp\u003eTermitor includes an enhanced CANbus system and adaptive power output to reduce error codes and flicker on many modern vehicles. The LED chips are aligned to match original filament placement so the beam cut-off remains crisp, minimizing glare for oncoming traffic when installed correctly in compatible housings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCANbus: built-in compatibility to prevent ECU errors on most cars.\u003c\/li\u003e\n  \u003cli\u003eBeam control: designed to replicate OEM filament position for a clean cutoff line.\u003c\/li\u003e\n  \u003cli\u003eNote: a small number of vehicles may still require a decoder or professional adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: drivers who want a direct, high-performance LED upgrade that preserves factory beam geometry and fits into tight headlamp spaces. This pack suits owners replacing multiple bulbs at once—low beams, high beams, and fog lights—especially if you need a bright, cool-white appearance and long operational life without extensive rewiring. If you have a vehicle with sensitive electronics, check compatibility first or contact Termitor support for guidance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these bulbs work in both H11 and 9005 sockets?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This combo includes bulbs sized for H11 and 9005 applications; check your vehicle's bulb types before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will they trigger dashboard error codes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most vehicles will be error-free thanks to the built-in CANbus compatibility; a few models may need a decoder.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55171195109719,"sku":"B0GF1GH4TP","price":130.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-packaging-view.jpg?v=1790440349"},{"product_id":"termitor-pro-grade-led-headlight-bulbs-h11-9005-combo-pack-of-4-6500k-bright-white-oe-fit-ip68-waterproof","title":"Termitor Pro-Grade LED Headlight Bulbs H11 + 9005 Combo Pack of 4 — 6500K Bright White, OE Fit \u0026 IP68 Waterproof","description":"\u003cp\u003e\u003cstrong\u003eTermitor Pro-Grade H11 + 9005 combo bulbs are high-output, plug-and-play LED replacements delivering bright 6500K light, OE-sized beam accuracy and durable IP68 protection in a 4-pack.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUpgrade your vehicle lighting with a factory-friendly LED kit designed for long life and clear road illumination. This Termitor combo set includes both H11 and 9005 bulbs, engineered to match original halogen beam geometry while producing crisp 6500K white light and a combined 140,000 lumen output. The bulbs are built with rugged thermal materials, waterproof sealing, and electronics to avoid flicker and dashboard errors on most modern vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will these bulbs install on my car?\u003c\/h3\u003e\n\u003cp\u003eInstallation is targeted to be straightforward and tool-light. The bulbs follow a 1:1 physical footprint so they slide into many factory housings without modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAverage install time: about 3 minutes per bulb under easy access.\u003c\/li\u003e\n  \u003cli\u003eTrue plug-and-play connectors—no soldering or splicing required.\u003c\/li\u003e\n  \u003cli\u003eCompact design fits tight passenger-side pockets better than bulkier aftermarket LEDs.\u003c\/li\u003e\n  \u003cli\u003eOptional CANbus adapter available if your car reports errors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these improve night visibility without blinding other drivers?\u003c\/h3\u003e\n\u003cp\u003eTermitor bulbs are engineered to recreate the halogen beam footprint so light is focused where you need it rather than scattering. Precision chip placement reduces dark zones and limits upward glare that can trouble oncoming traffic.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1:1 beam pattern aimed to align with original reflector\/projector geometry.\u003c\/li\u003e\n  \u003cli\u003eAnti-glare focus reduces stray light for safer shared-road use.\u003c\/li\u003e\n  \u003cli\u003e6500K color temperature provides high contrast for road markings and signs.\u003c\/li\u003e\n  \u003cli\u003eDesigned to minimize hot spots and uneven light distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are the bulbs for harsh weather and long-term use?\u003c\/h3\u003e\n\u003cp\u003eThese LEDs combine robust aluminum housings with efficient heat management and sealed electronics to resist moisture and dust. With an IP68 rating and extended lifespan metrics, the set is built for extended service in varied conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP68 waterproofing defends against heavy rain, snow, and mud exposure.\u003c\/li\u003e\n  \u003cli\u003eThermally managed aluminum body for stable output and longer life.\u003c\/li\u003e\n  \u003cli\u003eRated for over 85,000 hours of operation under normal conditions.\u003c\/li\u003e\n  \u003cli\u003eSmart driver electronics help prevent flicker and radio interference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles will these bulbs fit and are there compatibility caveats?\u003c\/h3\u003e\n\u003cp\u003eThe combo is sized to match original equipment for a wide range of modern cars, trucks, and SUVs, but some sensitive electrical systems may require additional adapters. Always confirm socket type and clearance before ordering if your vehicle has unique headlamp assemblies.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-sized housings (H11 and 9005) for broad compatibility with factory lamps.\u003c\/li\u003e\n  \u003cli\u003eWorks with approximately 99% of vehicle electrical systems without modification.\u003c\/li\u003e\n  \u003cli\u003eCANbus or load-resistor may be needed for vehicles with strict monitoring.\u003c\/li\u003e\n  \u003cli\u003ePack of 4 equips both left\/right bulbs for two positions in one purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who want a direct-replacement LED upgrade that balances intense white illumination with factory-style beam control. This kit suits commuters, night-shift drivers, weekend road-trippers and off-road enthusiasts looking for long-lasting, weatherproof lighting without altering housings or wiring. If you need brighter, whiter light with plug-and-play convenience and durable construction, this Termitor 4-pack is built to be a straightforward, long-lived upgrade.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long do Termitor H11 + 9005 bulbs last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are rated for more than 85,000 hours under typical use thanks to aluminum thermal management.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these bulbs cause dashboard errors on my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They’re compatible with about 99% of vehicles; some models may need a CANbus adapter to prevent error messages.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55171202122071,"sku":"B0FRN4TKKT","price":124.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-front-packaging-view_60cef597-6800-45fa-bb56-62aa9982c4da.jpg?v=1790440413"},{"product_id":"termitor-h11-9005-led-headlight-bulbs-dual-fit-h11-9005-120-000-lm-1500-brighter-compact-cooling-design","title":"Termitor H11+9005 LED Headlight Bulbs — Dual-Fit H11\/9005, 120,000 lm, 1500% Brighter, Compact Cooling Design","description":"\u003cp\u003e\u003cstrong\u003eThe Termitor H11+9005 LED driving bulb delivers intense 120,000 lumens per set for dramatically brighter, more consistent road illumination without bulky external drivers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt to replace factory halogen H11 and 9005 bulbs, this dual-fit LED set combines a compact, heat-managed design with an engineered beam pattern so you get wider, farther visibility at night and in poor weather. It uses upgraded Z10 LED chips, aviation-grade aluminum construction, and an internal cooling system to sustain strong output and long life while avoiding glare for oncoming drivers.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter will my headlights feel on the road?\u003c\/h3\u003e\n\u003cp\u003eExpect a significant jump in perceived brightness: Termitor rates the pair at 120,000 lumens per set, which translates to up to 1500% more visible light compared with many standard halogens. The extra light helps you spot hazards earlier and improves peripheral illumination.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e120,000 lumens per set from 12 high-performance LED chips\u003c\/li\u003e\n  \u003cli\u003eZ10 chip technology for higher efficacy and color stability\u003c\/li\u003e\n  \u003cli\u003eEngineered beam pattern to broaden and extend forward visibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs fit my vehicle and avoid dashboard errors?\u003c\/h3\u003e\n\u003cp\u003eThe H11+9005 kit is designed to mimic the size and light pattern of OEM halogens while adding modern LED performance. An upgraded CBNBUS driver improves compatibility with sensitive electronics, minimizing flicker and warning lights on most vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1:1 compact form factor to fit housings and dust covers\u003c\/li\u003e\n  \u003cli\u003eCBNBUS driver for broad vehicle compatibility (98%+ claimed)\u003c\/li\u003e\n  \u003cli\u003eReduced risk of CAN-bus faults, flicker, and dash warnings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the bulb stay cool and last longer?\u003c\/h3\u003e\n\u003cp\u003eTermitor combines high-grade materials and active cooling to manage heat, a key factor in LED lifespan and stable output. The assembly uses aviation-grade aluminum, a thermostatic copper plate, and a 22,000 RPM fan to remove heat quickly and keep the LEDs operating within safe temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision aluminum housing for rapid heat transfer\u003c\/li\u003e\n  \u003cli\u003eCopper thermostatic plate for thermal regulation\u003c\/li\u003e\n  \u003cli\u003eHigh-speed cooling fan enabling up to ~70,000 hours average life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the light safe and road-legal?\u003c\/h3\u003e\n\u003cp\u003eThese bulbs are engineered to produce a clear, controlled beam to reduce glare and maintain safe oncoming visibility. Termitor states DOT approval to FMVSS 108 standards, and test documentation accompanies the product to support its compliance claims.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered beam to avoid blinding oncoming drivers\u003c\/li\u003e\n  \u003cli\u003eDOT-approved to FMVSS 108 with test report reference\u003c\/li\u003e\n  \u003cli\u003eOptimized pattern to eliminate dark spots and shadowing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers who want a noticeable upgrade from halogen bulbs without bulky external drivers, and who need a compact LED that fits original housings, plays nicely with sensitive vehicle electronics, and performs reliably in night, rain, or fog. It suits commuters, long-distance drivers, and anyone seeking clearer highway vision with DOT-standard documentation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do H11 and 9005 fit the same socket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: H11 and 9005 are different sockets; this Termitor kit includes both sizes so you can match the correct bulb to your vehicle's socket.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these bulbs trigger my dashboard warning lights?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The CBNBUS driver reduces CAN-bus errors on most vehicles, but very sensitive systems may still require an additional resistor or adapter.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55171590586711,"sku":"B0GVQRJGP2","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-h11-9005-front-view.jpg?v=1790448471"},{"product_id":"termitor-h7-led-powersports-bulbs-pack-of-2-6500k-daylight-100-000lm-ip68-waterproof","title":"Termitor H7 LED Powersports Bulbs Pack of 2 — 6500K Daylight, 100,000LM, IP68 Waterproof","description":"\u003cp\u003e\u003cstrong\u003eTermitor H7 LED Powersports bulbs are ultra-bright, plug-and-play H7 replacements that deliver 100,000 lumens of 6500K daylight clarity with no adapter required.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUpgrade your motorcycle or ATV lighting with a pair of H7 bulbs engineered for off-road and street use. These bulbs combine a concentrated beam pattern with aviation-grade materials and a sealed IP68 body to withstand water, mud, and vibration while running long duty cycles. Designed to fit 1:1 in most factory housings, installation takes minutes without altering wiring or adding bulky drivers.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these bulbs and what does 6500K daylight look like?\u003c\/h3\u003e\n\u003cp\u003eTermitor’s H7 bulbs produce a very high lumen output and a cool white color temperature that mimics daylight for sharper contrast and color rendering at night. The 6500K tint reduces eye strain and helps you see road details and obstacles earlier than standard halogen lamps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100,000LM total output per set for intense forward illumination\u003c\/li\u003e\n  \u003cli\u003e6500K color temperature for crisp, neutral-white light\u003c\/li\u003e\n  \u003cli\u003eImproved contrast helps identify potholes, signs, and track features\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my motorcycle or ATV and require extra parts?\u003c\/h3\u003e\n\u003cp\u003eThese H7 bulbs are made to match original equipment dimensions so they slide into most H7 housings without adapters. The unit is driver-integrated and designed for 1:1 size replacement, minimizing compatibility issues for most modern bikes and ATVs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrue OE-size H7 form factor — no adapter needed\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play connector for simple, tool-free installation\u003c\/li\u003e\n  \u003cli\u003eWorks with 99% of vehicle electrical systems; check sensitive CANbus models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are the bulbs for off-road and harsh conditions?\u003c\/h3\u003e\n\u003cp\u003eTermitor builds these bulbs with robust materials and active cooling so they tolerate vibration, water ingress, and extended runtimes. The IP68 rating and aviation-grade aluminum body protect internal components in wet or muddy environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP68 waterproofing for reliable use in heavy rain and mud\u003c\/li\u003e\n  \u003cli\u003eAdvanced heat dissipation for extended life — rated 75,000+ hours\u003c\/li\u003e\n  \u003cli\u003eShock-resistant construction suitable for powersports use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kind of beam pattern and glare control can I expect?\u003c\/h3\u003e\n\u003cp\u003eThese H7 LEDs use precise chip placement to create a focused beam with a defined cutoff, minimizing dark spots and reducing glare for oncoming traffic. The goal is a long, even throw that preserves safety for others while improving your forward visibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUltra-thin chip spacing for a consistent, concentrated beam\u003c\/li\u003e\n  \u003cli\u003eSharp cutoff limits stray light and reduces glare\u003c\/li\u003e\n  \u003cli\u003eWider lateral spread for better peripheral visibility at speed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders and ATV drivers who want a substantial lighting upgrade without modifying their vehicle—ideal for commuters, weekend adventurers, and off-road racers seeking brighter sightlines, dependable weatherproofing, and a long service life. If your machine uses H7 bulbs and you want a straightforward swap to high-output LED performance, this Termitor pack of two offers a fast, durable solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these H7 LEDs need an adapter or resistor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No adapter or external resistor is required for most vehicles; they are true 1:1 replacements and plug directly into factory H7 sockets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these safe to use on public roads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The bulbs are designed with an anti-glare cutoff and focused beam, but check local regulations and alignment to ensure compliance before road use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55171598188887,"sku":"B0G43X4SB7","price":68.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-h7-front-view-pack-of-two.jpg?v=1790448561"},{"product_id":"termitor-h1-led-bulbs-6500k-cool-white-1-1-halogen-size-pack-of-2-high-output-160-000lm-ip68-waterproof","title":"Termitor H1 LED Bulbs 6500K Cool White, 1:1 Halogen Size Pack of 2 — High Output 160,000LM, IP68 Waterproof","description":"\u003cp\u003e\u003cstrong\u003eTermitor Upgraded H1 bulbs are high-output 6500K LED replacements engineered to match halogen filament position for a clear, glare-controlled beam and easy plug-and-play installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese H1 LEDs combine a compact 1:1 halogen-size housing with high-efficiency chipset and integrated cooling to deliver intense cool-white illumination without external drivers. Designed for powersports and road use, the bulbs aim to restore a focused cutoff pattern while fitting original lamp housings and dust covers. Built-in decoding circuitry and an IP68-rated exterior reduce compatibility headaches and exposure to water and dust.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these bulbs and what color do they produce?\u003c\/h3\u003e\n\u003cp\u003eTermitor H1 bulbs use multiple high-performance LED cores to generate a very high lumen output and emit a cool 6500K white light. The light is crisp and leans toward daylight white, improving visual contrast for objects and signs at distance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCombined lumen output marketed up to 160,000LM per set using upgraded multi-core chips.\u003c\/li\u003e\n  \u003cli\u003e6500K color temperature for a bright, cool white appearance.\u003c\/li\u003e\n  \u003cli\u003eClaims of long-range visibility for recognizing road features and obstacles earlier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these H1 LEDs fit my vehicle and are they easy to install?\u003c\/h3\u003e\n\u003cp\u003eThe bulbs are built to a 1:1 halogen size so they sit in the original housings and maintain the intended filament location for beam control. Installation is intended to be plug-and-play with a non-polarity connector and no bulky external driver in most cases.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact OEM-style form factor fits stock lamp cavities and dust covers.\u003c\/li\u003e\n  \u003cli\u003eNon-polarity plug removes the need to test orientation during install.\u003c\/li\u003e\n  \u003cli\u003eNo extra adapters required for typical H1 sockets; compatible with most housings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is heat handled and how long should these bulbs last?\u003c\/h3\u003e\n\u003cp\u003eTermitor addresses thermal management with an aviation-grade aluminum body, liquid-copper heat pathways, and a high-RPM silent fan to move heat away from LEDs. That cooling approach is intended to extend component life and reduce performance drop-off from heat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum shell plus liquid-copper structure for efficient heat transfer.\u003c\/li\u003e\n  \u003cli\u003e25000 RPM turbo fan for active heat dissipation without loud noise.\u003c\/li\u003e\n  \u003cli\u003eManufacturer-stated hours exceeding 85,000 for extended service life under typical use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these bulbs compatible with vehicle electronics and weatherproof?\u003c\/h3\u003e\n\u003cp\u003eBuilt-in intelligent decoding ICs are designed to minimize CANBUS errors, flicker, and radio interference on most vehicles. The external housing carries an IP68 rating for protection against dust and water immersion, making them suitable for wet or muddy conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClaimed 99% CANBUS compatibility to reduce error lights and flicker.\u003c\/li\u003e\n  \u003cli\u003eIP68 rating for dust and water resistance in challenging environments.\u003c\/li\u003e\n  \u003cli\u003eCustomer support offers free decoders for sensitive European models when needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers and powersports riders who want a high-intensity, cool-white H1 LED that matches halogen filament placement and installs without complex wiring will find this set suitable. It’s aimed at people upgrading stock halogen bulbs for brighter, longer-lasting illumination in cars, trucks, SUVs and ATVs while retaining proper beam focus and minimizing electrical issues.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these H1 LEDs need external drivers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—these bulbs feature an integrated wireless design and do not require bulky external drivers for most installations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will they trigger dashboard errors on modern vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They include built-in decoding ICs designed to avoid CANBUS errors; free decoders are available for sensitive European models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55171598221655,"sku":"B0H3RKD8QN","price":79.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-h1-front-packaging_84789943-28b5-4a01-8c58-2a69e04ef3a2.jpg?v=1790448562"},{"product_id":"termitor-h1-led-headlight-bulbs-pack-of-2-6500k-cool-white-true-1-1-halogen-size-no-adapter","title":"Termitor H1 LED Headlight Bulbs, Pack of 2 6500K Cool White — True 1:1 Halogen Size, No Adapter","description":"\u003cp\u003e\u003cstrong\u003eTermitor H1 LED bulbs are high-output, true 1:1 halogen-size headlight replacements that deliver crisp 6500K cool-white light and up to 140,000 lumens per pair without needing an external adapter.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese H1 replacements are engineered to give you a brighter, more focused beam while preserving factory fit and beam pattern. With a compact driver-built design, advanced cooling, and broad vehicle compatibility, they aim to solve common installation headaches and improve nighttime visibility while keeping glare to a minimum.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these bulbs compared with stock halogen lamps?\u003c\/h3\u003e\n\n\u003cp\u003eThe Termitor H1s are designed for a major brightness increase over standard halogen bulbs, offering a measured boost that improves forward illumination. Brightness is concentrated into a controlled beam to avoid excessive scatter and glare for other drivers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated up to 140,000 lumens per pair for significantly stronger road illumination.\u003c\/li\u003e\n  \u003cli\u003eTrue 1:1 halogen-style size preserves original beam geometry.\u003c\/li\u003e\n  \u003cli\u003e6500K cool-white color for crisp contrast and clearer peripheral detail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and require extra parts?\u003c\/h3\u003e\n\n\u003cp\u003eTermitor designed these H1 LEDs to match the physical dimensions of halogen bulbs so they fit most housings without aftermarket adapters. A compact integrated driver reduces the need for additional wiring boxes and helps maintain dust-cover compatibility in many vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrue halogen-size 1:1 design fits tight headlamp cavities.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in driver eliminates external adapter boxes in most installs.\u003c\/li\u003e\n  \u003cli\u003eUpgraded CBNBUS driver targets 98% vehicle compatibility; decoder available for rare warning or flicker issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these bulbs manage heat and durability?\u003c\/h3\u003e\n\n\u003cp\u003eReliable thermal control is central to the Termitor H1’s performance: aviation-grade aluminum, a thermostatic copper plate, and a high-speed fan work together to keep junction temperatures low. That extended thermal management supports long runtime and steady output over many service hours.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAviation-grade aluminum housing for efficient heat conduction.\u003c\/li\u003e\n  \u003cli\u003eThermostatic copper plate plus a 22,000 RPM cooling fan for active dissipation.\u003c\/li\u003e\n  \u003cli\u003eRated up to 85,000 hours under optimal conditions for long life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what should I check before fitting?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is designed to be quick — most users report an under-three-minute swap per bulb when replacing halogen H1 units. Still, check your headlamp access, dust cover clearance, and vehicle electronics to ensure a smooth changeover.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact form factor, 20% smaller than many LEDs, eases installation in tight spaces.\u003c\/li\u003e\n  \u003cli\u003eNo extra wiring in most cars thanks to the internal driver; may need decoder for some models.\u003c\/li\u003e\n  \u003cli\u003eKeep your headlight aiming in mind — final adjustment may be required after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who want a direct-fit, high-output upgrade from halogen H1 bulbs to a cool-white LED solution that preserves beam geometry and simplifies installation. These bulbs suit owners of vehicles with standard H1 sockets who need stronger forward lighting and long-lasting performance, and who prefer minimal additional parts or wiring. If your car is highly sensitive to aftermarket electronics, have the vehicle compatibility details ready or contact support for the supplied decoder option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do Termitor H1 LEDs need a separate driver or adapter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — they include an internal driver for most vehicles; a decoder is available if your car shows flicker or warning messages.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these bulbs fit the stock housing and keep the original beam pattern?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the true 1:1 halogen-size design preserves factory beam geometry and fits tight housings in most cars.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55171620569431,"sku":"B0G3F62GYT","price":68.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-h1-front-view.jpg?v=1790448817"},{"product_id":"termitor-9006-hb4-led-bulbs-pack-of-2-1-1-mini-70-000lm-6500k-cool-white-ip68-waterproof-canbus-ready","title":"Termitor 9006\/HB4 LED Bulbs Pack of 2 — 1:1 Mini, 70,000LM 6500K Cool White, IP68 Waterproof, CANbus Ready","description":"\u003cp\u003e\u003cstrong\u003eTermitor 9006\/HB4 LED bulbs deliver a factory-size, plug-and-play upgrade that produces an ultra-bright 70,000-lumen, 6500K cool-white beam with IP68 waterproof protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese bulbs replace standard 9006\/HB4 halogens without body or housing changes, offering a crisp daylight-like color and high output for better nighttime contrast. Designed in a true 1:1 mini form factor, the kit slides into existing fog or driving lamp sockets and works with most modern vehicle electronics thanks to CANbus-ready decoding. Built to withstand wet, dusty, and off-road conditions, they’re intended for drivers who want a straightforward light upgrade without extra components or complicated wiring.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these bulbs and what does 6500K look like?\u003c\/h3\u003e\n\u003cp\u003eThe pair produces up to 70,000 lumens combined, creating a strong, high-contrast beam ideal for fog, driving, or auxiliary lights. The 6500K color temperature reads as cool white with a slightly bluish tint that improves perceived detail and road texture at night.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e70,000 lumens per pair for significantly increased illumination\u003c\/li\u003e\n  \u003cli\u003e6500K daylight-like color for sharper visual contrast\u003c\/li\u003e\n  \u003cli\u003eEven beam distribution designed for fog and driving housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these 9006\/HB4 bulbs fit my car without modification?\u003c\/h3\u003e\n\u003cp\u003eYes — the bulbs are manufactured to a true 1:1 OEM size so they match stock halogen dimensions and seat directly into factory sockets. Installation is plug-and-play with no extra adapters or external drivers required for most vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrue 1:1 mini form factor for exact fit in original housings\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play wiring — swap bulbs in minutes\u003c\/li\u003e\n  \u003cli\u003eNo modification to housing or mounting necessary for standard setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these bulbs compatible with modern vehicle electronics and weatherproof?\u003c\/h3\u003e\n\u003cp\u003eTermitor bulbs include advanced CANbus-ready decoding to prevent error codes, flicker, and warning lights on most cars. Constructed with IP68 sealing, they resist water and dust to perform reliably in rain, mud, and dusty environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCANbus-ready design reduces dashboard errors and flicker\u003c\/li\u003e\n  \u003cli\u003eWorks with over 98% of vehicle electrical systems; some vehicles may need a decoder\u003c\/li\u003e\n  \u003cli\u003eIP68-rated waterproof and dustproof housing for durable outdoor use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is the installation and what should I expect after fitting them?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: remove the old 9006\/HB4 bulb, insert the Termitor LED, and reconnect the factory plug. After installation you should notice a brighter, cooler beam with improved road detail and stable operation under different driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove stock bulb, insert Termitor 9006\/HB4 LED, connect factory plug\u003c\/li\u003e\n  \u003cli\u003eNo ballast, external driver, or complex wiring necessary\u003c\/li\u003e\n  \u003cli\u003eImmediate brightness and color improvement with stable output\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: drivers who want a reliable, high-output fog\/driving light upgrade that installs in minutes and fits most vehicles. These bulbs suit daily commuters wanting better night visibility, off-road enthusiasts needing rugged, waterproof lighting, and car owners seeking a direct OEM-style replacement without added hardware. If your vehicle is highly sensitive to electronic changes, contact Termitor support for guidance or to request a CANbus decoder recommendation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these bulbs fit all 9006\/HB4 sockets?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They match true 1:1 OEM dimensions and fit most 9006\/HB4 housings, but a few vehicle models may need a CANbus decoder.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are they waterproof for off-road use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — IP68-rated sealing protects against heavy rain, mud, and dust for reliable off-road performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Termitor","offers":[{"title":"Default Title","offer_id":55171706683735,"sku":"B0DMST5W19","price":68.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/termitor-9006-hb4-front-profile.jpg?v=1790449301"}],"url":"https:\/\/britishgarage.co.uk\/collections\/termitor.oembed","provider":"British Garage","version":"1.0","type":"link"}