{"title":"Tyres \u0026 Wheels Accessories","description":"\u003cp\u003ePortable 12 V and cordless tyre inflators, digital pressure and tread-depth gauges, puncture repair kits and sealants, wheel cleaners and brushes, locking wheel nuts, hub caps, valve caps and wheel-trim fixings. The UK legal minimum tread is 1.6 mm across the central three-quarters of the tyre; a gauge in the glovebox costs less than a coffee and saves the argument at the test centre.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat to look for:\u003c\/strong\u003e an inflator with an auto-stop at a set pressure and a hose long enough to reach a rear wheel from the 12 V socket; a gauge reading in PSI and bar (UK handbooks use both); wheel cleaners that say “acid-free” if you have diamond-cut or polished alloys; and locking nuts with a coded key you can replace if lost.\u003c\/p\u003e\u003cp\u003eContinue to \u003ca href=\"\/collections\/car-care\"\u003ecar care\u003c\/a\u003e, \u003ca href=\"\/collections\/winter-and-emergency\"\u003ewinter and emergency kit\u003c\/a\u003e or \u003ca href=\"\/collections\/tools-and-equipment\"\u003etools\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"vxdas-tpms-relearn-tool-for-gm-ford-gl50448-2-in-1-green-315-433-mhz-sensor-activator","title":"VXDAS TPMS Relearn Tool for GM \u0026 Ford GL50448 — 2‑in‑1 Green, 315\/433 MHz Sensor Activator","description":"\u003cp\u003e\u003cstrong\u003eThe VXDAS 2IN1 TPMS Relearn Tool Super GL50448 is a handheld device that activates and relearns tire pressure sensors on compatible GM and Ford vehicles using selectable G\/F modes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact green TPMS tool is built for DIYers and technicians who need a quick, reliable way to reset or reprogram original equipment tire pressure monitoring sensors operating at 315\/433 MHz. Designed with a model switch button for GM (G) and Ford (F) families, the GL50448 covers Buick, Cadillac, Chevrolet, GMC, Lincoln and many Ford models such as F-150, F-250, Focus and Fusion. It is intended for vehicles with factory TPMS; it does not support heavy trucks with more than four tires or external aftermarket TPMS systems.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use the VXDAS tool to reset a tire pressure sensor?\u003c\/h3\u003e\n\u003cp\u003eUsing the GL50448 is a simple process: choose the correct G or F mode, power the unit, and place it next to the valve stem or sensor you wish to activate. The tool sends a signal to wake and register the sensor, allowing the vehicle’s ECU to relearn it after rotation, replacement, or sensor replacement. Most activations are completed within a minute when a fresh 9V battery is installed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelect G (GM) or F (Ford) using the top model switch button.\u003c\/li\u003e\n  \u003cli\u003ePress the power button and hold near the tire valve stem to trigger the sensor.\u003c\/li\u003e\n  \u003cli\u003eConfirm relearn via the vehicle’s instrument cluster or scan tool.\u003c\/li\u003e\n  \u003cli\u003eReplace with a new 9V battery if signals are weak.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and sensor types are compatible with this relearn device?\u003c\/h3\u003e\n\u003cp\u003eThe VXDAS GL50448 works with original equipment TPMS systems that communicate on 315 or 433 MHz—commonly found on many GM and Ford passenger vehicles. It covers a wide list including Buick, Cadillac, Chevrolet, GMC, Lincoln, Mazda and numerous Ford models, but it is not designed for heavy commercial trucks with more than four tyres or cars running aftermarket external TPMS modules.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: OEM TPMS sensors at 315\/433 MHz for GM and Ford lines.\u003c\/li\u003e\n  \u003cli\u003eNot compatible: Trucks with more than four tires or external aftermarket TPMS.\u003c\/li\u003e\n  \u003cli\u003eCommonly supported models: Buick, Cadillac, Chevrolet, GMC, Lincoln, Mazda, Ford F-series, Focus, Fusion.\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle manual or service info for OEM TPMS frequency before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose the 2-in-1 design instead of a single-brand tool?\u003c\/h3\u003e\n\u003cp\u003eThe built-in model switch button simplifies switching between GM and Ford relearn procedures without carrying separate devices. That flexibility makes the tool more convenient for shops or owners who service multiple vehicle brands and reduces the chance of using the wrong protocol during relearn operations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo modes (G and F) selectable on the unit’s top button for quick swaps.\u003c\/li\u003e\n  \u003cli\u003eSaves money by avoiding dealership trips for TPMS relearn fees.\u003c\/li\u003e\n  \u003cli\u003eCompact, handheld profile fits in a toolbox or glove compartment.\u003c\/li\u003e\n  \u003cli\u003eRequires only a single 9V battery (not included) for operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance or precautions should I follow when using the GL50448?\u003c\/h3\u003e\n\u003cp\u003eTo keep activation reliable, use a fresh 9V battery and avoid metal obstructions between the tool and the sensor. Follow your vehicle manufacturer’s relearn sequence after tool activation and confirm the sensor is correctly registered on the dash or with a scan tool before driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall a new high-quality 9V battery for best signal strength.\u003c\/li\u003e\n  \u003cli\u003eAvoid placing the tool behind thick metal components during activation.\u003c\/li\u003e\n  \u003cli\u003ePerform vehicle-specific relearn steps immediately after activation.\u003c\/li\u003e\n  \u003cli\u003eStore the device in a dry place and avoid heavy impacts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The VXDAS 2IN1 TPMS Relearn Tool Super GL50448 is aimed at DIY vehicle owners, mobile mechanics, and independent garages that service GM and Ford passenger vehicles and want a cost-effective way to reset or activate factory TPMS sensors. It’s ideal for anyone who performs tire rotations, sensor replacements, or seasonal wheel swaps and prefers to restore TPMS functionality without dealer intervention.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this tool work with aftermarket TPMS sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It supports OEM TPMS sensors at 315\/433 MHz. It does not support external aftermarket TPMS systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What battery does the GL50448 need to operate reliably?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The tool requires a new 9V battery (not included). A fresh battery ensures strong signal and reliable activations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VXDAS","offers":[{"title":"Default Title","offer_id":55161004065111,"sku":"B0C23WDB2D","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/vxdas-gl50448-front-view.jpg?v=1790320559"},{"product_id":"plews-tru-flate-large-bore-clip-on-locking-air-chuck-17-392-brass-body-zinc-plated-locking-lever-for-big-rigs","title":"Plews Tru-Flate Large-Bore Clip-On Locking Air Chuck 17-392 — Brass Body, Zinc-Plated Locking Lever for Big Rigs","description":"\u003cstrong\u003eTru-Flate 17-392 is a heavy-duty large-bore clip-on locking air chuck that snaps onto tire valves and locks in place to inflate large truck and earth-moving tires without holding the chuck.\u003c\/strong\u003e\n\n\u003cp\u003eBuilt for commercial fleets and heavy equipment, the Plews Tru-Flate 17-392 combines a robust brass body with a zinc-plated steel locking lever and an internal shut-off valve so you can deliver high-volume airflow safely and reliably. Designed for large-bore valves found on big rigs, agricultural, and construction equipment, this clip-on chuck functions like a quick coupler, holding onto the valve while maintaining uninterrupted airflow until you release it.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the locking clip stay secure during inflation?\u003c\/h3\u003e\n\u003cp\u003eThe 17-392 uses a lever-operated locking mechanism that grips the valve stem and resists vibration and pressure during inflation. Once engaged, it won’t fall off or require continuous hand pressure, letting technicians work faster and safer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLever-operated zinc-plated steel locking clip for strong grip\u003c\/li\u003e\n  \u003cli\u003eSnap-on action like a quick coupler for positive engagement\u003c\/li\u003e\n  \u003cli\u003eResistant to vibration from heavy equipment and highway use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this chuck with an inflator gauge or pressure tool?\u003c\/h3\u003e\n\u003cp\u003eNo — the Tru-Flate 17-392 has its own internal shut-off valve and is not intended for use with inflator gauges that require direct flow through the chuck. Use it with standard air hose and inline equipment designed for large-bore chucks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNot compatible with inflator gauges that need through-flow\u003c\/li\u003e\n  \u003cli\u003eWorks best with high-volume air hoses and appropriate fittings\u003c\/li\u003e\n  \u003cli\u003e1\/4-18 NPT female inlet thread fits common compressor fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and connection specs ensure durability?\u003c\/h3\u003e\n\u003cp\u003eThis chuck pairs a durable brass body with a zinc-plated steel locking lever to withstand the harsh conditions of commercial and off-road environments. The metal combination resists corrosion and impact while the 1\/4-18 NPT female inlet thread fits industry-standard air fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSturdy brass construction for corrosion resistance and longevity\u003c\/li\u003e\n  \u003cli\u003eZinc-plated steel locking lever for added strength and wear resistance\u003c\/li\u003e\n  \u003cli\u003e1\/4-18 NPT female inlet for broad compatibility with air lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this chuck perform on large tires and heavy equipment?\u003c\/h3\u003e\n\u003cp\u003eSpecifically sized for large-bore valves, the 17-392 gives reliable, high-flow performance needed to fill big truck, trailer, agricultural, and earth-moving tires. Its clip-on design reduces time spent holding the chuck in place and minimizes air loss while adjusting pressures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLarge-bore design matches heavy-duty valve stems on big rigs and earth movers\u003c\/li\u003e\n  \u003cli\u003eInternal shut-off valve prevents backflow and limits air loss when removed\u003c\/li\u003e\n  \u003cli\u003eQuick snap-on action speeds up inflation and service tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Plews Tru-Flate 17-392 is aimed at fleet mechanics, heavy equipment operators, agricultural service technicians, and any shop that routinely services large truck, trailer, or off-road tires. If you need a tough, reliable clip-on chuck that locks on large-bore valves and stands up to commercial use, this model delivers industry-standard fittings and durable materials suited for daily shop or field work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 17-392 compatible with small passenger car valves?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It's designed for large-bore valves on trucks and heavy equipment, not standard passenger car Schrader valves.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What size inlet thread does this chuck use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The chuck has a 1\/4-18 NPT female inlet, compatible with common compressor fittings and hoses.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Plews","offers":[{"title":"Default Title","offer_id":55161009766743,"sku":"B00HFLF76O","price":30.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/plews-tru-flate-17-392-front-view.jpg?v=1790320704"},{"product_id":"a-premium-m14-1-50-acorn-wheel-lug-nuts-set-of-5-22mm-hex-steel-corrosion-resistant-finish","title":"A-Premium M14-1.50 Acorn Wheel Lug Nuts Set of 5 — 22mm Hex, Steel Corrosion-Resistant Finish","description":"\u003cp\u003e\u003cstrong\u003eA-Premium M14-1.50 acorn-style wheel lug nuts — a set of five precision steel nuts engineered to replace front or rear factory lug nuts on specific Acura and Honda models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts are designed as direct-fit replacements where an M14-1.50 thread, 22 mm hex, and acorn profile are required. Built from durable steel with a corrosion-resistant finish, they match the factory size and fit for select Acura MDX, RLX, TL, ZDX and Honda Odyssey, Passport, Pilot, Ridgeline applications. Each set includes five nuts, intended to swap into existing wheels or to keep as spares during maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eWhich cars are these lug nuts compatible with?\u003c\/h3\u003e\n\u003cp\u003eThese lug nuts fit a range of Acura and Honda models when the OEM thread specification is M14-1.50. Confirm fitment by matching thread pitch and overall length with the vehicle's factory lug nuts before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAcura: MDX (2010–2013, 2017–2020), RLX (2014–2020), TL (2009–2014), ZDX (2010–2013)\u003c\/li\u003e\n  \u003cli\u003eHonda: Odyssey (2011–2012, 2014–2021), Passport (2019–2021), Pilot (2011–2021), Ridgeline (2012–2014, 2017–2021)\u003c\/li\u003e\n  \u003cli\u003eOEM reference numbers to cross-check: 611-327, 611327, 611-3271, 6113271, 90304TK4A01\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications I should verify before buying?\u003c\/h3\u003e\n\u003cp\u003eMake sure the thread diameter, pitch, hex size and overall length on your vehicle match these lug nuts. Proper specification matching ensures safe fitment and avoids stripped threads or wheel misalignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread size: M14-1.50 (14 mm diameter, 1.5 mm pitch)\u003c\/li\u003e\n  \u003cli\u003eThread direction: Right-hand (clockwise)\u003c\/li\u003e\n  \u003cli\u003eHex size: 22 mm, Overall length: 1.122 inch\u003c\/li\u003e\n  \u003cli\u003eStyle: Acorn (conical closed-end), Material: Steel, Quantity: set of five\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these lug nuts hold up against corrosion and everyday wear?\u003c\/h3\u003e\n\u003cp\u003eThe nuts are finished to resist rust and degradation from road moisture, salt and dirt. Precision-machined threads maintain a tight engagement with wheel studs to minimize play and loosening over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant alloy finish for long-term durability\u003c\/li\u003e\n  \u003cli\u003ePrecision-fit threads reduce play and prevent loosening\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand impact, temperature swings and road contaminants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and confidence does A-Premium provide?\u003c\/h3\u003e\n\u003cp\u003eA-Premium backs these lug nuts with a one-year unlimited-mileage guarantee, reflecting manufacturing confidence and giving buyers a clear path for replacement if defects arise under normal use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-year unlimited-mileage guarantee from A-Premium\u003c\/li\u003e\n  \u003cli\u003eSold in a set of five for partial wheel replacement or spares\u003c\/li\u003e\n  \u003cli\u003eCross-reference OEM numbers before purchase for exact fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These A-Premium M14-1.50 acorn lug nuts are for owners and technicians who need direct-fit replacements for specified Acura and Honda wheels, drivers who want corrosion-resistant hardware with factory-style dimensions, and anyone keeping spare lug nuts for service or emergency repairs. Confirm thread size and hex wrench compatibility before installing; torque to manufacturer specifications and inspect periodically for safe, long-lasting performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these lug nuts fit my Acura MDX 2016?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — these fit MDX years 2010–2013 and 2017–2020. Check thread M14-1.50 and hex 22 mm for fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these include a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — A-Premium provides a one-year unlimited-mileage guarantee on these lug nuts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"A-Premium","offers":[{"title":"Default Title","offer_id":55161010553175,"sku":"B09V1CJMNP","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/a-premium-front-packaging-lug-nuts.jpg?v=1790320753"},{"product_id":"orle-oko-golf-cart-lug-nuts-1-2-20-thread-16-pack-black-forged-alloy-60-conical-seat","title":"Orle Oko golf cart lug nuts 1\/2-20 thread – 16-pack black, forged alloy, 60° conical seat","description":"\u003cp\u003e\u003cstrong\u003eOrle Oko 16-piece black lug nut set securely replaces OEM lug nuts on EZGO and Club Car golf carts with 1\/2-20 threads and a 60° conical seat.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUpgrade or replace worn wheel fasteners with this complete set of 16 black lug nuts designed specifically for popular golf cart brands. These lug nuts match common OEM part numbers used by EZGO, Club Car and similar makes, and are forged from alloy steel for improved strength and longer service life. Before ordering, verify thread pitch and seat type to ensure correct fit.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my EZGO or Club Car golf cart?\u003c\/h3\u003e\n\n\u003cp\u003eThese lug nuts are manufactured to the 1\/2-20 thread size with a 60° conical (tapered) seat, which corresponds to the specifications used on many EZGO and Club Car wheels. They are intended as direct replacements for several OEM numbers listed by those manufacturers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThread: 1\/2-20 (verify against your wheel studs)\u003c\/li\u003e\n  \u003cli\u003eSeat: 60° conical to match tapered wheel holes\u003c\/li\u003e\n  \u003cli\u003eHex\/drive: 3\/4 inch (use matching socket or wrench)\u003c\/li\u003e\n  \u003cli\u003eCompatible OEM references: EZGO 14723-G1, 1701160, 6350 and Club Car 1010984, 1011390\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable are these lug nuts?\u003c\/h3\u003e\n\n\u003cp\u003eMade from alloy steel and produced via a forging process, these lug nuts deliver better toughness and resistance to wear compared with simple stamped parts. The black finish offers corrosion protection and a low-profile look suitable for regular outdoor use on carts.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaterial: forged alloy steel for strength and longevity\u003c\/li\u003e\n  \u003cli\u003eFinish: black coating for rust resistance and visual consistency\u003c\/li\u003e\n  \u003cli\u003eSet size: 16 pieces to replace all wheel positions on most carts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and steps are recommended for installation?\u003c\/h3\u003e\n\n\u003cp\u003eUse the correct hand tools to tighten these lug nuts—avoid impact guns or electric drivers, which can damage the nut’s spline or the finish. A 6-point spline lug nut socket or a 3\/4\" (19 mm) combination wrench is suggested for safe installation and accurate torque control.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRequired tool: 6-point spline lug nut socket or 3\/4\" (19 mm) wrench\u003c\/li\u003e\n  \u003cli\u003eDo not use: electric impact wrenches or air tools (can crack or strip the nut)\u003c\/li\u003e\n  \u003cli\u003eInstall sequence: tighten in a star pattern and torque to your cart manufacturer’s spec\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich OEM numbers and cart models does this replace?\u003c\/h3\u003e\n\n\u003cp\u003eThese lug nuts are offered as replacements for a range of OEM part numbers used on EZGO, Club Car and some Cushman or Jacobsen models. Double-check the OEM reference and the wheel stud specifications on your vehicle before purchase.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eEZGO OEM: 14723-G1, 1701160, 6350\u003c\/li\u003e\n  \u003cli\u003eClub Car OEM: 1010984, 1011390\u003c\/li\u003e\n  \u003cli\u003eOther referenced: Cushman 800573, Jacobsen 14723-G1\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This 16-piece Orle Oko lug nut set is aimed at golf cart owners, fleet managers, and maintenance techs who need a reliable replacement for worn or missing lug nuts on EZGO and Club Car carts. It's especially useful when you require full-set replacement, a stronger forged construction, and a discreet black finish. If your cart uses 1\/2-20 threaded studs with a 60° conical seat and you want to avoid frequent reorders, this kit is a practical choice—just confirm fitment against your cart’s wheel specifications before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts compatible with Yamaha golf carts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These are made for EZGO and Club Car applications with 1\/2-20 threads and a 60° seat, not Yamaha models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install them with an impact wrench?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Do not use impact or electric tools; use a 6-point spline socket or 3\/4\" wrench to avoid damage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orle Oko","offers":[{"title":"Default Title","offer_id":55161013174615,"sku":"B0D2QK35TK","price":29.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/orle-oko-front-packaging-lug-nuts.jpg?v=1790320870"},{"product_id":"godeson-air-chuck-dual-head-tire-chucks-11-8-extended-reach-pack-of-2-1-4-fnpt-brass-with-rubber-grip","title":"GODESON Air Chuck Dual‑Head Tyre Chucks – 11.8\" Extended Reach, Pack of 2, 1\/4\" FNPT Brass with Rubber Grip","description":"\u003cstrong\u003eGODESON Air Chuck is a pair of heavy‑duty, 11.8‑inch dual‑head tire chucks designed to reach inner dual wheels and stubborn valve stems while giving a secure, hands‑free connection.\u003c\/strong\u003e\n\nBuilt for truck, RV, bus and commercial fleet use, these extended‑reach air chucks combine a straight and a 30° reverse nozzle on a single brass body so you can access inner and outer wheel valves without wrestling hoses. The 1\/4\" FNPT thread fits most compressors and inflators, and the included brass quick plug lets you clip in quickly to standard couplers. With a rubberized grip and sealed, closed‑flow design, these chucks protect against unwanted air loss and make routine tire inflation faster and cleaner.\n\n\u003ch3\u003eHow do these chucks make inflating inner dual wheels easier?\u003c\/h3\u003e\n\u003cp\u003eThe 11.8\" overall length and dual‑head layout let you reach valve stems that are recessed or surrounded by wheel hardware. One end is a straight foot for tight inner wheel spaces and the other is a 30° reverse head for outer wheel access, so you won’t need extensions or improvised adapters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStraight foot nozzle for confined inner wheel valves\u003c\/li\u003e\n  \u003cli\u003e30° reverse head for outer wheel and angled stems\u003c\/li\u003e\n  \u003cli\u003e11.8\" length to clear wheel wells and dual hubs\u003c\/li\u003e\n  \u003cli\u003eTwo‑headed design avoids swapping tools mid‑job\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fittings and connections will this air chuck work with?\u003c\/h3\u003e\n\u003cp\u003eThe chuck uses a 1\/4\" FNPT thread, the common standard for inflators and air hoses, making it broadly compatible with compressors and tire inflators. It also includes a brass quick plug for fast coupling to quick‑connect couplers used in many workshops and fleet garages.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/4\" FNPT female thread fits most inflators and air lines\u003c\/li\u003e\n  \u003cli\u003eBrass quick plug for instant coupling to couplers\u003c\/li\u003e\n  \u003cli\u003eWorks with standard compressor hoses and tire gauges\u003c\/li\u003e\n  \u003cli\u003eThreaded connection offers secure, leak‑resistant mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and user‑friendly is the GODESON air chuck?\u003c\/h3\u003e\n\u003cp\u003eConstructed primarily from brass with a zinc‑alloy nozzle, these chucks resist corrosion and stand up to frequent shop use. A rubber handle provides a non‑slip grip for safer handling, and the closed‑flow (sealing) design prevents airflow until the chuck is properly engaged with the valve core, reducing wasted air and accidental leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrass body for long‑term durability and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eZinc alloy nozzle for abrasion and impact resistance\u003c\/li\u003e\n  \u003cli\u003eRubber grip for comfortable, slip‑resistant handling\u003c\/li\u003e\n  \u003cli\u003eClosed‑flow sealing to prevent unintended air loss\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I attach and detach the chuck for hands‑free inflation?\u003c\/h3\u003e\n\u003cp\u003eBoth heads use a threaded locking action that engages the valve core so you can apply pressure without holding the chuck in place. Push the chuck onto the valve stem, lean it slightly to lock on, and when inflation is complete, straighten and pull off to release. This method keeps the connection secure and simplifies sequential tire service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePush on firmly to engage valve core threads\u003c\/li\u003e\n  \u003cli\u003eLean slightly to lock, then allow hands‑free inflation\u003c\/li\u003e\n  \u003cli\u003eStraighten to disengage and remove after use\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeatable, fast connections during fleet service\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for: These GODESON dual‑head air chucks suit truck drivers, RV owners, bus and fleet maintenance crews, and home garages that work on dual wheels or recessed valve stems. If you need a sturdy, long‑reach chuck that pairs with standard compressors and reduces fumbled hose maneuvers, this two‑pack offers a practical, cost‑effective solution for routine tire inflation and maintenance.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my compressor hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The chucks use a 1\/4\" FNPT thread and include a brass quick plug compatible with standard compressor hoses and quick‑couplers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I inflate inner dual tires without holding the chuck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The dual‑head locking design secures to valve core threads for hands‑free inflation once properly engaged.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GODESON","offers":[{"title":"Default Title","offer_id":55161013207383,"sku":"B0CYP5FDLF","price":30.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/godeson-front-packaging-air-chucks.jpg?v=1790320866"},{"product_id":"tgkbrmea-spare-tire-cover-for-rv-camper-14-inch-weatherproof-polyester-uv-water-resistant","title":"TGKBRMEA Spare Tyre Cover for RV Camper 14-inch Weatherproof Polyester, UV \u0026 Water-Resistant","description":"\u003cp\u003e\u003cstrong\u003eTGKBRMEA Spare Tire Cover is a weatherproof, polyester wheel protector designed to fit RVs, campers, trailers and trucks by shielding spare tires from sun, rain, dust and abrasion.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your exposed spare tire looking and performing its best while parked or on the road. This cover is made from durable polyester fiber with water-resistant and UV-resistant properties and uses a simple tethered design for fast, tool-free installation. It comes in multiple sizes — follow the tire-dimension calculation below to select the right fit rather than relying only on wheel diameter markings.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I determine the correct size for my spare tire cover?\u003c\/h3\u003e\n\u003cp\u003eDo not choose a size based solely on the rim diameter printed on the wheel. Use the tire coding on the sidewall and the provided formula to calculate the overall tire diameter. This gives a true finished measurement so the cover will slip on easily and stay secure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLocate the tire code, for example P225\/65R17 (A=225\/10=22.5, B=0.65, C=17).\u003c\/li\u003e\n  \u003cli\u003eApply the formula: diameter = (A * B * 2) + (C * 2.54), using centimeters for final result.\u003c\/li\u003e\n  \u003cli\u003eCompare your calculated diameter to the size chart: 14\" fits 60–69 cm, 15\" fits 70–75 cm, 16\" fits 76–79 cm, 17\" fits 80–83 cm.\u003c\/li\u003e\n  \u003cli\u003eIf you’re between measurements, choose the larger size for easier installation and better coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection and materials does this cover provide?\u003c\/h3\u003e\n\u003cp\u003eThe TGKBRMEA spare tire cover is woven from high-quality polyester fiber engineered for outdoor exposure. It blocks UV rays, sheds light rain and prevents dust and grime from accumulating on the spare tire. The fabric resists tearing and fading so the cover stays functional season after season.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePolyester fiber for abrasion resistance and long-term use.\u003c\/li\u003e\n  \u003cli\u003eWater-resistant surface to reduce moisture intrusion and dirt buildup.\u003c\/li\u003e\n  \u003cli\u003eUV-resistant treatment to slow sun fade and dry-rot on rubber.\u003c\/li\u003e\n  \u003cli\u003eLightweight build that won’t add unnecessary weight to the mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and secure the cover?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and requires no tools: slip the cover over the tire and secure the built-in tether with a knot or tie. The tethered design holds the cover in place during travel while remaining easy to remove for tire checks or maintenance. This makes it ideal for frequent travelers and seasonal vehicle storage alike.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTool-free setup — simply pull on and tie off the attached cord.\u003c\/li\u003e\n  \u003cli\u003eTether keeps cover from blowing off while driving.\u003c\/li\u003e\n  \u003cli\u003eQuick removal for inspection, cleaning or rotation of the spare tire.\u003c\/li\u003e\n  \u003cli\u003eCompact and lightweight for convenient storage when not in use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this cover fit my RV, trailer, or truck spare tire?\u003c\/h3\u003e\n\u003cp\u003eThe cover is designed as a universal option for RVs, campers, trailers, SUVs and pickup trucks, provided you select the correct size according to the calculation method. It accommodates common spare tire diameters listed in the size chart and gives full-face protection for mounted spares.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with RVs, travel trailers, campers, SUVs and pickup trucks.\u003c\/li\u003e\n  \u003cli\u003eAvailable in sizes covering 60–83 cm overall tire diameters.\u003c\/li\u003e\n  \u003cli\u003eDesigned to cover the entire spare, including sidewall and tread face.\u003c\/li\u003e\n  \u003cli\u003eWorks on vertically or rear-mounted spare tire configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This spare tire cover suits RV owners, frequent road-trippers, seasonal campers and anyone who wants to protect a mounted spare from sun, rain and grime. Choose the appropriate size using the tire-sidewall calculation, and use the lightweight, quick-install design to keep a clean, protected spare tire ready for emergencies or long-term storage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I measure my tire to choose the right cover size?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use the tire sidewall code and: diameter = (A * B * 2) + (C * 2.54), then match the result to the cover size chart.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the cover stay on during driving?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The built-in tether secures the cover to the spare to resist wind and movement while traveling.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TGKBRMEA","offers":[{"title":"Default Title","offer_id":55161014157655,"sku":"B0DRW73VT7","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/tgkbrmea-front-view-spare-tire-cover.jpg?v=1790320888"},{"product_id":"conquer-quick-connect-air-chuck-auto-grip-schrader-valve-adapter-360-swivel-one-button-release","title":"CONQUER Quick Connect Air Chuck — Auto-Grip Schrader Valve Adapter, 360° Swivel \u0026 One-Button Release","description":"\u003cp\u003e\u003cstrong\u003eThe CONQUER Quick Connect Air Chuck is a push-to-lock Schrader valve adapter that delivers instant, airtight connection, one-button release, and a 360° swivel for faster, more accurate tire inflation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered for home garages and professional shops alike, this metal quick-connect inflator replaces screw-on chucks with a patent-style auto-grip head that clamps securely to standard Schrader valves. Its open-flow design and durable construction speed up inflation while minimizing air loss, making it a practical upgrade for cars, trucks, motorcycles, ATVs, RVs and most Schrader-equipped bicycles. (Note: not compatible with Presta valves.)\u003c\/p\u003e\n\n\u003ch3\u003eHow does the auto-grip connection improve everyday inflation tasks?\u003c\/h3\u003e\n\u003cp\u003eThe push-to-lock mechanism eliminates the need to thread a chuck onto a valve, cutting time and frustration. It seats instantly and forms a tight seal so you don’t constantly hold the chuck in place while inflating.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstalls with a single push; no twisting required\u003c\/li\u003e\n  \u003cli\u003ePatented clamp-style grip reduces accidental drops\u003c\/li\u003e\n  \u003cli\u003eCreates an air-tight fit to reduce leaks during filling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this help me get precise tire pressure without losing air when disconnecting?\u003c\/h3\u003e\n\u003cp\u003eYes — the integrated one-button quick release isolates the valve so you can detach cleanly with minimal pressure loss. The spring-loaded release gives a controlled disengagement that preserves the pressure you’ve set.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-button action for fast, repeatable release\u003c\/li\u003e\n  \u003cli\u003eMinimizes the hissing and pressure bleed common with screw chucks\u003c\/li\u003e\n  \u003cli\u003eBetter consistency when inflating to a target PSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the 360° swivel head affect usability in tight spaces?\u003c\/h3\u003e\n\u003cp\u003eThe anti-kink swivel rotates freely to keep the hose aligned while you work, preventing bends that restrict airflow. That flexibility makes it easier to reach awkward valve positions on dual-wheel trucks, motorcycles, and bikes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull rotation prevents hose twisting and improves maneuverability\u003c\/li\u003e\n  \u003cli\u003eKeeps airflow unobstructed for faster fill times\u003c\/li\u003e\n  \u003cli\u003eReduces strain on hose fittings and connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this adapter built to handle heavy use in a garage or shop?\u003c\/h3\u003e\n\u003cp\u003eConstructed from industrial-grade metal, the CONQUER Quick Connect is designed for repeated, everyday use. Its open-flow straight chuck allows higher-volume air delivery so large tires and high-capacity compressors work more efficiently.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable metal body resists wear from frequent handling\u003c\/li\u003e\n  \u003cli\u003eOpen-flow design supports rapid inflation of big tires\u003c\/li\u003e\n  \u003cli\u003eCompatible with most portable air compressors and pumps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The CONQUER Quick Connect Air Chuck is ideal for DIY mechanics, professional technicians, and vehicle owners who want faster, cleaner inflations without fumbling or losing pressure. If you service cars, trucks, motorcycles, ATVs, RVs, or Schrader-valve bicycles and need a robust, time-saving connector, this adapter is a practical, long-lasting upgrade.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this chuck compatible with Presta valves?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The CONQUER Quick Connect is designed only for standard Schrader valves.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it fit my portable air compressor hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It works with most compressor hoses and high-capacity pumps that accept a straight chuck adapter.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"CONQUER","offers":[{"title":"Default Title","offer_id":55161014681943,"sku":"B0G2W9DBP4","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/conquer-quick-connect-front-view.jpg?v=1790320914"},{"product_id":"autel-mx-series-metal-valve-stem-kit-4-pack-sae-certified-tool-free-click-in-sealing","title":"Autel MX-Series Metal Valve Stem Kit — 4-Pack SAE-Certified, Tool-Free Click-In Sealing","description":"\u003cp\u003e\u003cstrong\u003eAutel 4PCS Metal Valve Stem Kit for MX-Sensor provides four factory-fit, SAE-certified metal valve stems engineered specifically for Autel MX-Series TPMS sensors to ensure precise sealing and easy installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese valve stems are made to match the Autel MX tire pressure monitoring sensors, offering a reliable, leak-resistant metal valve option that meets industry standards. The kit includes four stems and uses a patented tool-free locking method for quick service and sensor swaps. SAE J1205\/J1206 certification confirms compatibility and performance for passenger vehicles when paired with MX-Series sensors.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these valve stems simplify TPMS sensor installation?\u003c\/h3\u003e\n\u003cp\u003eThe Autel metal stems feature a patented click-in and press-out mechanism that eliminates the need for special tools, making sensor replacement or re-seating faster. Technicians and DIYers can install or remove the stem without risking damage to the sensor or wheel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTool-free click-in design for quick assembly\u003c\/li\u003e\n  \u003cli\u003ePress-out release for fast removal\u003c\/li\u003e\n  \u003cli\u003eStops common installation mistakes that cause leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these valve stems prevent air leaks and corrosion?\u003c\/h3\u003e\n\u003cp\u003eThese stems are precision-machined from corrosion-resistant metal and engineered to form a tight, leak-minimizing seal with Autel MX-Series sensors. The high-precision valve geometry and quality materials reduce the chance of seepage over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-precision valve bore for consistent sealing\u003c\/li\u003e\n  \u003cli\u003eMetal construction resists wheel-chemical corrosion\u003c\/li\u003e\n  \u003cli\u003eDesigned to maintain pressure integrity under normal driving conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these valve stems certified and compatible with standard vehicles?\u003c\/h3\u003e\n\u003cp\u003eThe kit carries SAE J1205\/J1206 certification and is intended for use with Autel MX-Series TPMS sensors on most passenger cars and light trucks. Always check wheel and sensor compatibility before installation to ensure a proper match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeets SAE J1205\/J1206 industry standards\u003c\/li\u003e\n  \u003cli\u003eFits Autel MX-Series TPMS sensors exactly\u003c\/li\u003e\n  \u003cli\u003ePackaged as a convenient set of four for a full-vehicle service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance or replacement schedule should I expect?\u003c\/h3\u003e\n\u003cp\u003eValve stems should be inspected whenever tires are changed or rotated and replaced if they show corrosion, damage, or air leakage. Replacing stems when servicing sensors helps maintain TPMS accuracy and avoids repeat visits for leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect at every tire change or rotation\u003c\/li\u003e\n  \u003cli\u003eReplace immediately if threads or sealing surfaces are damaged\u003c\/li\u003e\n  \u003cli\u003eSwap all four at once for consistent performance across the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians, fleet managers, and vehicle owners who use Autel MX-Series TPMS sensors and want a reliable, quick-to-install metal valve solution. This 4-piece kit suits anyone performing regular tire maintenance or sensor replacements and seeking SAE-certified components that reduce downtime and improve sealing reliability.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact fit for Autel MX-Series TPMS Sensors\u003c\/li\u003e\n  \u003cli\u003ePatented tool-free design (click in \u0026amp; press out)\u003c\/li\u003e\n  \u003cli\u003eHigh-precision, leak-proof air valve\u003c\/li\u003e\n  \u003cli\u003eSAE J1205\/J1206 certified\u003c\/li\u003e\n  \u003cli\u003ePacked as a group of 4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these valve stems work with all Autel TPMS sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are designed specifically for Autel MX-Series sensors; verify your sensor model before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these without special tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The patented click-in and press-out design allows tool-free installation and removal.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autel","offers":[{"title":"Default Title","offer_id":55161015796055,"sku":"B0GLFFZB5T","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autel-valve-stem-front-packaging.jpg?v=1790320953"},{"product_id":"skog-chuck-mates-quick-connect-tire-air-chuck-1-pack-schrader-valve-fit-snap-lock-durable-taiwan-construction","title":"SKÖG Chuck Mates quick-connect tyre air chuck 1‑Pack — Schrader valve fit, snap‑lock, durable Taiwan construction","description":"\u003cstrong\u003eSKÖG Chuck Mates is a quick-connect tire air chuck that snaps onto Schrader valves for fast, leak-resistant inflation with durable Taiwan-made components.\u003c\/strong\u003e\n\n\u003cp\u003eDesigned for drivers, cyclists, and anyone who inflates tires regularly, this SKÖG Chuck Mates Premium Quick-Connect Accessory replaces fiddly screw-on chucks with a swift push-on connection. Engineered in the USA and manufactured in Taiwan to higher quality standards, it delivers reliable performance and compact convenience whether you're in the garage, at the track, or roadside.\u003c\/p\u003e\n\n\u003ch3\u003eHow does SKÖG Chuck Mates speed up inflating tires?\u003c\/h3\u003e\n\u003cp\u003eThe quick-connect mechanism eliminates threaded engagement so you can attach and detach in seconds. The chuck locks to common Schrader valves to keep air loss minimal during pressure checks and topping up.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePush-on, snap-lock action for one-handed use\u003c\/li\u003e\n  \u003cli\u003eSecure hold reduces valve leaks while filling\u003c\/li\u003e\n  \u003cli\u003eSaves time compared with screw-type chucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this accessory fit my tire inflator or compressor?\u003c\/h3\u003e\n\u003cp\u003eChuck Mates is built for broad compatibility with most inflators and compressors that accept standard quick-connect fittings. It’s optimized for Schrader-type valves, the most widely used valve on cars, trucks, and many bikes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with common inflator hoses and quick-couplers\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for Schrader valve interfaces\u003c\/li\u003e\n  \u003cli\u003eCompact profile adapts to tight wheel wells and valve stems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the construction and materials better?\u003c\/h3\u003e\n\u003cp\u003eUnlike many low-cost alternatives, SKÖG Chuck Mates is crafted in Taiwan under strict quality control and uses robust components that resist wear and maintain a dependable seal. That translates to longer life and fewer replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-machined metal parts for consistent operation\u003c\/li\u003e\n  \u003cli\u003eDurable seals and fasteners to limit leakage\u003c\/li\u003e\n  \u003cli\u003eLightweight yet sturdy for portable use in vehicles and toolkits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use and care for this quick-connect chuck?\u003c\/h3\u003e\n\u003cp\u003eAttach by pushing the chuck onto the valve until it locks, then inflate and release as usual. Keep the coupling clean and dry, and inspect seals periodically to ensure reliable performance over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePush to engage, pull back sleeve to release\u003c\/li\u003e\n  \u003cli\u003eWipe debris from valve and chuck before use\u003c\/li\u003e\n  \u003cli\u003eStore in a dry compartment to protect seals and metal surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? SKÖG Chuck Mates is ideal for motorists, fleet managers, cycling enthusiasts, mobile mechanics, and anyone who wants quicker, more dependable tire inflation. If you value fast attachment, fewer leaks, and components made to higher standards, this 1-pack quick-connect chuck is a practical upgrade to your inflator accessories.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit Presta valves?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — Chuck Mates is designed for Schrader valves. Use a Presta adapter for compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the chuck reusable for heavy-duty use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — crafted in Taiwan for durability, it's suitable for regular garage and roadside use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKÖG","offers":[{"title":"Default Title","offer_id":55161019466071,"sku":"B0CYDXGGH2","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/skog-front-view-packaging.jpg?v=1790321041"},{"product_id":"ynnloyss-63mm-wheel-center-hub-cap-covers-for-dodge-charger-challenger-black-with-red-double-stripe-includes-4-valve-stem-caps","title":"Ynnloyss 63mm Wheel Centre Hub Cap Covers for Dodge Charger\/Challenger — Black with Red Double-Stripe, Includes 4 Valve Stem Caps","description":"\u003cp\u003e\u003cstrong\u003eThese Ynnloyss 4PCS 63mm (2.5\") wheel center hub cap covers and matching valve stem caps refresh Dodge Charger\/Challenger\/Durango wheels with a durable, non-fading black-and-red double-stripe design.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a direct-fit aesthetic replacement for factory center caps (compatible with part numbers like 6C227DX8AA and 6C227RM8AA), this set includes four ABS matte-finish hub covers and four aluminum valve stem caps that share the same double-stripe motif. Built to resist heat, water, and sunlight, the pieces are intended to restore a coordinated, sporty look to your rims without complex tools or permanent modification.\u003c\/p\u003e\n\n\u003ch3\u003eWill these center caps fit my Dodge wheels?\u003c\/h3\u003e\n\u003cp\u003eThey’re made for 63mm (2.5 inch) wheel center openings commonly found on Dodge Charger, Challenger, Durango, Journey, Avenger, Hornet, Dart, and SRT models. Confirm your existing cap diameter before ordering to ensure a correct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDiameter: 63mm (2.5 inches)\u003c\/li\u003e\n  \u003cli\u003eReplacement part compatibility: 6C227DX8AA, 6C227RM8AA\u003c\/li\u003e\n  \u003cli\u003eVehicles commonly supported: Charger, Challenger, Durango, Journey, Avenger, Hornet, Dart, SRT\u003c\/li\u003e\n  \u003cli\u003eSimple snap-on installation—no drilling required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are the hub caps and valve stem covers?\u003c\/h3\u003e\n\u003cp\u003eYnnloyss hub covers are molded from high-quality ABS with a matte finish that resists fading, heat, and water exposure. The valve stem caps use light aluminum alloy for corrosion resistance and long-term appearance retention.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eABS material: heat- and waterproof, non-fading\u003c\/li\u003e\n  \u003cli\u003eMatte finish: resists scratches and glare\u003c\/li\u003e\n  \u003cli\u003eAluminum valve caps: lightweight, rust-resistant\u003c\/li\u003e\n  \u003cli\u003eDesigned for long-term outdoor use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what’s included in the package?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: pry off the old center caps and press the new Ynnloyss covers into place. No adhesives or special tools are required for most standard wheels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 4 wheel hub center caps and 4 matching valve stem caps\u003c\/li\u003e\n  \u003cli\u003eInstallation: press-fit replacement—remove old caps first\u003c\/li\u003e\n  \u003cli\u003eTrim-to-fit not necessary when diameter matches\u003c\/li\u003e\n  \u003cli\u003eWorks as a cosmetic upgrade without altering wheel balance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat visual effect will these caps have on my car?\u003c\/h3\u003e\n\u003cp\u003eThe distinct black base with a red double-stripe emblem gives wheels a coordinated, performance-inspired accent that reads clearly from a distance. The matching valve caps complete the look for a more professional, factory-style finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSporty two-tone styling with Dodge double-stripe motif\u003c\/li\u003e\n  \u003cli\u003eMatte texture reduces shine for a refined appearance\u003c\/li\u003e\n  \u003cli\u003eValve caps echo the wheel design for cohesive detail\u003c\/li\u003e\n  \u003cli\u003eSubtle upgrade that enhances curb appeal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Ynnloyss set is aimed at Dodge owners and automotive enthusiasts who want a direct-fit cosmetic refresh for 63mm center caps without expensive aftermarket wheels. It suits anyone seeking a durable, coordinated wheel accent—especially drivers of Charger, Challenger, Durango, Journey, Avenger, Hornet, Dart, and SRT models—who prefer quick installation and a non-permanent, stylish upgrade.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these center caps snap-on or glued?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are press-fit snap-on caps designed to replace existing 63mm center caps—no glue required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the valve stem caps match the hub cap design?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the included aluminum valve stem caps feature the same double-stripe pattern for a cohesive wheel appearance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Ynnloyss","offers":[{"title":"Default Title","offer_id":55161023234391,"sku":"B0FB163GRJ","price":30.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ynnloyss-front-facing-hub-cap-set.jpg?v=1790321111"},{"product_id":"qwork-tr572-brass-commercial-valve-stems-10-pack-3-75-length-200psi-heavy-duty-epdm-seal","title":"QWORK TR572 Brass Commercial Valve Stems 10-Pack, 3.75\" Length, 200psi Heavy-Duty EPDM Seal","description":"\u003cp\u003e\u003cstrong\u003eQWORK TR572 brass valve stems are heavy-duty replacement stems for tubeless commercial truck and bus tires, sold as a 10-piece pack with 3.75\" length and a 200psi cold-pressure rating.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt to withstand the demands of commercial fleets, these valve stems combine a brass body and EPDM rubber gaskets to resist leaks, ozone exposure, and repeated service intervals. The TR572’s dimensions fit standard tubeless rims used on trucks and buses, and the 200psi cold rating provides a wide safety margin for heavy-duty applications. Supplied in a convenient bulk bag of ten, they streamline maintenance and spares management for shops and fleet operators.\u003c\/p\u003e\n\n\u003ch3\u003eAre these TR572 valve stems compatible with my truck or bus wheels?\u003c\/h3\u003e\n\u003cp\u003eThese valve stems are designed for tubeless commercial wheels that accept a 16mm (Φ 0.625\") rim hole and need an effective stem length of about 95mm (3.75\"). They work with most truck and bus rim profiles that use replaceable rubber-stem arrangements. Always verify your rim hole diameter and required stem length before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEffective length: 95 mm (3.75\")\u003c\/li\u003e\n  \u003cli\u003eRim hole size: 16 mm (Φ 0.625\")\u003c\/li\u003e\n  \u003cli\u003eDesigned for tubeless commercial rims\u003c\/li\u003e\n  \u003cli\u003eCheck rim specs to confirm fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and leak-resistant are the QWORK TR572 stems?\u003c\/h3\u003e\n\u003cp\u003eThe TR572s use a brass body for corrosion resilience and EPDM rubber gaskets to maintain an airtight seal under repeated mounting and tire service. Brass resists galvanic degradation and the EPDM compound prevents common leak paths around the base. Combined, these materials extend service life compared with cheaper alternatives and reduce downtime from slow leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass construction for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eEPDM rubber gaskets to prevent leaks\u003c\/li\u003e\n  \u003cli\u003eOzone-resistant materials to slow environmental aging\u003c\/li\u003e\n  \u003cli\u003eSuitable for repeated mounting and dismounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat pressure and environmental conditions can these valve stems handle?\u003c\/h3\u003e\n\u003cp\u003eQWORK TR572 stems are rated to hold up to 200psi cold inflation pressure, giving a substantial safety margin for most commercial tire pressures. They are manufactured to resist ozone exposure and routine environmental stressors, which helps maintain sealing integrity across seasons and long service intervals. That makes them a reliable choice for fleet vehicles operating in varied climates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCold pressure capacity: up to 200 psi\u003c\/li\u003e\n  \u003cli\u003eOzone-resistant design for environmental durability\u003c\/li\u003e\n  \u003cli\u003eAppropriate for heavy-duty commercial use\u003c\/li\u003e\n  \u003cli\u003eGood aging characteristics under normal operating conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the pack and how do I manage replacements?\u003c\/h3\u003e\n\u003cp\u003eThis product ships as a 10-piece bag of TR572 valve stems, providing enough spares for several tires or routine shop inventory. Buying in a 10-pack reduces downtime by keeping replacements on hand and simplifies purchasing for fleet maintenance. Install with standard valve stem tools and torque practices to ensure proper seating and seal integrity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuantity: 10 valve stems per bag\u003c\/li\u003e\n  \u003cli\u003ePackaging suited for shop inventory or fleet spares\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard valve installation tools\u003c\/li\u003e\n  \u003cli\u003eRecommended to replace stems during tire service intervals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The QWORK TR572 brass valve stems suit fleet managers, commercial tire shops, and truck or bus operators who need dependable, leak-resistant stems in bulk. If you maintain tubeless heavy-vehicle tires that use a 16mm rim hole and require a 3.75\" stem with high pressure capacity, this 10-pack provides a practical, durable spare solution. For precise fitment, compare your rim hole diameter and required stem length to the TR572 specifications before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What rim hole size do QWORK TR572 valve stems need?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They require a rim hole of 16 mm (Φ 0.625\"). Confirm your wheel specifications before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these valve stems handle commercial tire pressures?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they are rated to withstand up to 200 psi cold inflation pressure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QWORK","offers":[{"title":"Default Title","offer_id":55161039225175,"sku":"B0FBFKTQR2","price":30.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/qwork-tr572-front-packing.jpg?v=1790321266"},{"product_id":"amfor-tire-covers-set-of-2-19-21-inch-fit-for-rv-trailer-suv-waterproof-uv-protection","title":"AmFor Tyre Covers Set of 2 — 19–21 inch Fit for RV, Trailer \u0026 SUV, Waterproof UV Protection","description":"\u003cp\u003e\u003cstrong\u003eAmfor Tire Covers set protects parked trailer, RV, camper, SUV, or truck tires from sun, rain, snow and wind using a four-layer, weatherproof construction and wind-resistant fastening.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen vehicles sit for long periods, tires suffer from UV cracking, moisture damage and dirt buildup. These Amfor wheel covers come as a pair and are made to fit overall tire diameters of 19–21 inches. The multi-layer build balances reflective protection, waterproofing and a soft inner lining to keep rubber supple while a secure elastic band and buckle system resists uplift in gusty conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow do Amfor covers defend tires from sun and weather?\u003c\/h3\u003e\n\u003cp\u003eThe covers combine high-reflectivity and waterproof layers to block harmful sunlight and prevent water penetration. A soft interior protects rubber from abrasive contact, and the material resists mildew and staining so tires stay cleaner during storage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReflective aluminum layer reduces heat absorption and UV exposure\u003c\/li\u003e\n  \u003cli\u003ePE and PEVA layers provide waterproofing against rain and snow\u003c\/li\u003e\n  \u003cli\u003eSoft cotton-like lining cushions tire sidewalls and prevents scuffing\u003c\/li\u003e\n  \u003cli\u003eFour-layer composite designed for long-term outdoor use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these covers stay secure in wind and while driving short distances?\u003c\/h3\u003e\n\u003cp\u003eAmfor covers include an elasticized hem plus a windproof buckle and hook for a snug, stable fit that resists being blown off. Seams are double-stitched to lower the risk of tearing, making the covers reliable for parked vehicles and brief relocations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eElastic band contours to tire circumference for consistent tension\u003c\/li\u003e\n  \u003cli\u003eHook and buckle lock down the cover against gusts\u003c\/li\u003e\n  \u003cli\u003eReinforced double-stitched seams increase durability\u003c\/li\u003e\n  \u003cli\u003eEasy to secure and remove without tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I pick the right size and install these tire covers?\u003c\/h3\u003e\n\u003cp\u003eMeasure the tire’s full outside diameter — not the rim — and choose the 19–21 inch fit range. Installation takes moments: slip the cover over the tire, pull the elastic hem down, then fasten the buckle and hook for a tightened fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure whole tire diameter (from outer tread edge to outer tread edge)\u003c\/li\u003e\n  \u003cli\u003eFits most trailers, RVs, campers, trucks and SUVs with 19–21\" tires\u003c\/li\u003e\n  \u003cli\u003eNo tools required; quick on\/off for seasonal storage\u003c\/li\u003e\n  \u003cli\u003eFollow included size guide image for confident selection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and care do these wheel covers need?\u003c\/h3\u003e\n\u003cp\u003eThese covers are designed for low upkeep. Wipe with a damp cloth to remove dirt, let air dry fully before storing, and avoid harsh solvents to preserve the reflective and waterproof layers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpot clean with mild soap and water\u003c\/li\u003e\n  \u003cli\u003eAir dry completely before folding for storage\u003c\/li\u003e\n  \u003cli\u003eStore in a cool, dry place away from prolonged direct sunlight\u003c\/li\u003e\n  \u003cli\u003eAvoid bleach or strong chemicals that can damage layers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Amfor Tire Covers set is ideal for RV owners, boat trailer and camper keepers, truck and SUV owners who park outdoors, and anyone seeking a simple, durable solution to protect tires during seasonal storage or extended stops. If you want straightforward installation, water resistance, UV reflection and wind-secure fastening for 19–21 inch overall tire diameters, this pair offers practical protection without tools or complicated hardware.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these covers fit 20-inch rims?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Measure the tire's total outside diameter; these covers fit 19–21 inch overall tire diameters, not rim size.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I leave them on year-round?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they are designed for long-term outdoor use, but clean and air-dry periodically to maintain performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AmFor","offers":[{"title":"Default Title","offer_id":55161042534743,"sku":"B0CQY64WS5","price":29.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/amfor-front-view-on-wheel.jpg?v=1790321291"},{"product_id":"noilfasiki-raccoon-spare-tire-cover-14-waterproof-uv-resistant-universal-fit-for-rvs-trailers-suvs","title":"noilfasiki Raccoon Spare Tyre Cover — 14\" Waterproof, UV-Resistant Universal Fit for RVs, Trailers \u0026 SUVs","description":"\u003cp\u003e\u003cstrong\u003eA waterproof, sun-resistant spare tire cover with a raccoon design that fits many trailers, RVs, SUVs and trucks and protects your wheel while adding personality.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eGive your vehicle a practical visual upgrade with the noilfasiki raccoon spare tire cover. Crafted from wipeable polyester, this cover shields spare tires from rain, snow, dust and UV exposure while the playful raccoon print makes your rig stand out on campsites and city streets. The elastic hem and secure back fastening allow quick installation and a snug, universal fit across common spare-wheel diameters.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this cover protect my spare tire outdoors?\u003c\/h3\u003e\n\u003cp\u003eThe cover forms a weather-resistant barrier that keeps moisture, dirt and sun off the rubber, helping maintain the tire’s appearance and rim condition. It’s made from abrasion-resistant polyester that wipes clean and sheds water instead of soaking through.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWaterproof polyester fabric repels rain and snow\u003c\/li\u003e\n  \u003cli\u003eUV-resistant material reduces sun fading and cracking\u003c\/li\u003e\n  \u003cli\u003eWipeable surface for easy cleaning after travel\u003c\/li\u003e\n  \u003cli\u003eAbrasion-resistant to help shield against road wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my vehicle’s spare wheel?\u003c\/h3\u003e\n\u003cp\u003eNoilfasiki covers are designed with a flexible fit and come in multiple sizes to match typical spare tire diameters on trailers, SUVs, RVs and trucks. Measure the full tire diameter—from outer edge to outer edge—and choose the corresponding size to ensure a proper fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e14\" listed size fits tires with 23\"–27\" diameter\u003c\/li\u003e\n  \u003cli\u003e15\" fits 27\"–29\" diameter; 16\" fits 29\"–31\"\u003c\/li\u003e\n  \u003cli\u003e17\" fits 31\"–33\" diameter — pick the nearest match\u003c\/li\u003e\n  \u003cli\u003eElastic hem and fastening help secure the cover in place\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to put on and remove?\u003c\/h3\u003e\n\u003cp\u003eInstallation and removal are tool-free and designed to be quick. The elastic edge stretches over the spare wheel while an adjustable back closure helps keep the cover snug during travel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTool-free, fast on\/off for weekend or seasonal use\u003c\/li\u003e\n  \u003cli\u003eElasticized edge for a snug wrap around the tire\u003c\/li\u003e\n  \u003cli\u003eBack fastening secures the cover against wind and movement\u003c\/li\u003e\n  \u003cli\u003eLightweight for easy storage when not in use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the raccoon design a good choice?\u003c\/h3\u003e\n\u003cp\u003eThe raccoon graphic offers a distinctive, personalized look that sets your vehicle apart without altering its function. This decorative pattern also helps identify your vehicle quickly in crowded areas like campgrounds and parking lots.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUnique raccoon motif adds personality to your vehicle\u003c\/li\u003e\n  \u003cli\u003ePrinted on durable fabric that resists fading\u003c\/li\u003e\n  \u003cli\u003eEnhances curb appeal while remaining practical\u003c\/li\u003e\n  \u003cli\u003eSuitable for both rugged and urban settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The noilfasiki raccoon spare tire cover is aimed at drivers who want simple, effective protection for an exposed spare wheel and a little extra style—ideal for RVers, trailer owners, SUV and truck drivers, and anyone who parks outdoors or travels frequently. If you value easy installation, weather resistance and a unique look, this cover is a practical accessory to help protect and personalize your vehicle.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tire diameters does the 14\" cover fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 14\" size fits spare wheels with an overall diameter of about 23\"–27\". Measure outer edge to outer edge before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the material easy to clean?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The polyester surface wipes clean and repels water, making routine cleaning quick and simple.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"noilfasiki","offers":[{"title":"Default Title","offer_id":55161051382103,"sku":"B0BW9QQY74","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/noilfasiki-front-view-raccoon-cover.jpg?v=1790321351"},{"product_id":"dudsoeho-spare-tire-cover-for-rv-trailer-14-waterproof-pu-coated-pvc-american-flag-design","title":"DUDSOEHO Spare Tyre Cover for RV Trailer 14\" — Waterproof PU-Coated PVC, American Flag Design","description":"\u003cp\u003e\u003cstrong\u003eDUDSOEHO's 14\" American-flag spare tire cover is a waterproof, heavy-duty PVC with PU surface protector designed to shield RV, trailer, SUV and Jeep Wrangler spare wheels while adding patriotic style.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis spare tire cover pairs durable, weather-resistant construction with a bold USA flag design so your exposed wheel stays clean and protected without sacrificing appearance. Built with a PU-coated PVC exterior and reinforced stitching, the cover resists rain, dust and UV exposure while remaining soft enough to avoid scratching rims. An elastic hem simplifies installation and keeps the fit snug over a 14\" spare with a tire diameter of about 65–69 cm.\u003c\/p\u003e\n\n\u003ch3\u003eWill this spare tire cover stand up to sun, rain and road grime?\u003c\/h3\u003e\n\u003cp\u003eYes — the DUDSOEHO cover uses a heavy-duty PVC core with a PU surface that sheds water, resists dust, and tolerates outdoor conditions. Tight stitching and the coated finish make cleaning simple and reduce fading from sunlight.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWaterproof PU-coated PVC face for wet-weather protection\u003c\/li\u003e\n  \u003cli\u003eDustproof finish for long-term cleanliness\u003c\/li\u003e\n  \u003cli\u003eReinforced seams to prevent early wear or splitting\u003c\/li\u003e\n  \u003cli\u003eSoft surface prevents scratches on rims or cover contact points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know if the 14\" size will fit my spare tire?\u003c\/h3\u003e\n\u003cp\u003eThe DUDSOEHO 14\" model is intended for spare tires with an overall diameter between approximately 65 and 69 cm. Always measure your full tire diameter (from outer edge to outer edge) twice before ordering to ensure a snug fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e14\" cover fits tire diameters ~65–69 cm\u003c\/li\u003e\n  \u003cli\u003eMeasure across the front of the mounted tire for accuracy\u003c\/li\u003e\n  \u003cli\u003eElastic hem adapts to small size variations for an even hold\u003c\/li\u003e\n  \u003cli\u003eChoose 15\", 16\" or 17\" options for larger diameters as needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and maintenance for everyday use?\u003c\/h3\u003e\n\u003cp\u003eInstallation takes seconds — no tools required — because the cover features an elastic band edge that stretches over the mounted spare and holds securely. For upkeep, rinse or wipe the PU-coated surface to remove dirt, then air dry; the material resists stains and is designed for low-maintenance care.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eElastic band design for quick on\/off installation\u003c\/li\u003e\n  \u003cli\u003eNo tools or mounting hardware needed\u003c\/li\u003e\n  \u003cli\u003eWipe clean with damp cloth or hose off for heavier grime\u003c\/li\u003e\n  \u003cli\u003eFast-drying material prevents mildew and odors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this cover fit different vehicles like RVs, Jeeps and trucks?\u003c\/h3\u003e\n\u003cp\u003eYes — this version is tailored to common trailer and passenger spare sizes and suits many RVs, trailers, SUVs, Jeeps and light trucks when you select the correct diameter. The classic American flag graphic also works as an aesthetic upgrade for outdoor and travel vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with RVs, travel trailers, Jeeps, SUVs and trucks\u003c\/li\u003e\n  \u003cli\u003eAvailable in multiple diameters to match most spare wheels\u003c\/li\u003e\n  \u003cli\u003eDesigned to preserve wheel appearance and resale condition\u003c\/li\u003e\n  \u003cli\u003eFlag motif enhances vehicle curb appeal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The DUDSOEHO 14\" American flag spare tire cover is built for RV owners, trailer users, Jeep Wrangler and SUV drivers, and any traveler who wants a quick-protection solution that looks good. It’s especially useful for people who park outdoors, store a vehicle seasonally, or want an easy, low-effort way to keep a spare tire clean and sheltered from the elements without modifying the vehicle.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tire diameters fit the 14\" DUDSOEHO cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 14\" cover fits spare tires with a diameter of approximately 65–69 cm. Measure across the mounted tire to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I clean the DUDSOEHO spare tire cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Wipe with a damp cloth or rinse with water for heavier dirt; air dry. The PU-coated PVC resists stains and dries quickly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DUDSOEHO","offers":[{"title":"Default Title","offer_id":55161065210199,"sku":"B0B7LNPH68","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/dudsoeho-front-packaging-flag-cover.jpg?v=1790321649"},{"product_id":"skdorpfm-griplow-90-valve-stems-for-multi-piece-wheels-60mm-chrome-set-of-4-low-profile","title":"Skdorpfm Griplow 90° Valve Stems for Multi-Piece Wheels 60mm Chrome Set of 4 Low-Profile","description":"\u003cp\u003e\u003cstrong\u003eSkdorpfm Griplow 90° 60mm valve stems are chrome 90-degree replacement stems designed for 2- and 3-piece JDM, Euro, and US multi-piece wheels, sold as a set of four with caps.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Griplow gw60 valve stems provide a low-profile, angled air-access solution for high-end multi-piece rims where a straight stem won’t fit or interferes with wheel components. Made to fit the common .453\" (11.5mm) wheel hole and finished in chrome, the 60mm (2.36\") length gives enough reach for most wheel designs while keeping the stem tucked close to the rim for a clean aesthetic.\u003c\/p\u003e\n\n\u003ch3\u003eHow will a 90° valve stem improve fit on multi-piece wheels?\u003c\/h3\u003e\n\u003cp\u003eAngled valve stems prevent interference with inner barrels, spokes, or decorative caps on multi-piece wheels. The 90-degree orientation routes the stem along the rim contour so you can inflate or check tire pressure without removing wheel components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e90° elbow reduces clearance conflicts with spokes and inner lips\u003c\/li\u003e\n  \u003cli\u003e60mm length reaches past bead-seat areas on deep or stepped rims\u003c\/li\u003e\n  \u003cli\u003eChrome finish complements polished or machined wheel surfaces\u003c\/li\u003e\n  \u003cli\u003eStandard .453\" base fits most multi-piece wheel holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these valve stems durable and easy to install?\u003c\/h3\u003e\n\u003cp\u003eThe Griplow valve stems are built for wheel applications where repeated inflation, torque, and road vibration occur. Installation is straightforward for any mechanic familiar with multi-piece wheel assembly; a proper seat and tightening ensure an airtight connection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSold as a set of 4 with matching valve caps for a complete replacement\u003c\/li\u003e\n  \u003cli\u003eDesigned for pressure retention under normal driving loads\u003c\/li\u003e\n  \u003cli\u003eWorks with standard tools used for valve stem seat and nut installation\u003c\/li\u003e\n  \u003cli\u003eChrome plating resists corrosion and matches common wheel trims\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my wheel — what measurements matter?\u003c\/h3\u003e\n\u003cp\u003eFit is determined by the wheel hole diameter and the stem’s base design; the Skdorpfm Griplow stems accept the standard .453\" (11.5mm) hole common on many multi-piece wheels. The 60mm stem length and 90° bend make them suitable for most JDM, Euro, and US 2- and 3-piece wheel builds, but always compare to your original stem dimensions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWheel hole diameter: .453\" (11.5mm) standard fit\u003c\/li\u003e\n  \u003cli\u003eStem length: 60mm (2.36\") measured from base to tip\u003c\/li\u003e\n  \u003cli\u003eOrientation: 90-degree elbow for low-profile routing\u003c\/li\u003e\n  \u003cli\u003eFinish: chrome for visual match and corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain these valve stems to ensure long life?\u003c\/h3\u003e\n\u003cp\u003eRoutine checks during tire service are the best way to maintain valve stems. Inspect the chrome finish and the rubber sealing surfaces for wear, replace caps after each service, and torque the mounting components to the wheel-maker’s specs to prevent leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck for cracking or hardening of rubber seals during tire changes\u003c\/li\u003e\n  \u003cli\u003eKeep valve caps on to reduce contamination and moisture entry\u003c\/li\u003e\n  \u003cli\u003eReplace any stem showing corrosion, looseness, or leakage\u003c\/li\u003e\n  \u003cli\u003eUse recommended torque settings when fastening on multi-piece wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Skdorpfm Griplow 90-degree 60mm valve stems are aimed at owners, restorers, and builders of high-end multi-piece wheels — especially JDM, European, and US-style rims — who need an angled, chrome-finished valve solution. They suit mechanics and enthusiasts replacing worn stems, upgrading to a low-profile look, or assembling 2- and 3-piece wheels where straight stems won’t clear the wheel structure. If your wheel uses a standard .453\" hole and calls for a 60mm angled stem, this four-pack provides a matched, ready-to-install option with caps included.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these valve stems fit a .453\" wheel hole?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Griplow stems are designed for the standard .453\" (11.5mm) wheel hole common on multi-piece rims.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are valve caps included with the purchase?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — each set includes four valve stems and matching valve caps for a complete replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Skdorpfm","offers":[{"title":"Default Title","offer_id":55161067569495,"sku":"B09YNCNRT9","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/skdorpfm-griplow-front-view-chrome-valve-stem.jpg?v=1790321751"},{"product_id":"dreyoo-lock-on-air-chuck-4-pack-1-4-fnpt-quick-connector-heavy-duty-brass-zinc-plated-anti-leak-check-valve","title":"Dreyoo Lock-On Air Chuck 4-Pack — 1\/4\" FNPT Quick Connector, Heavy-Duty Brass Zinc-Plated, Anti-Leak Check Valve","description":"\u003cp\u003e\u003cstrong\u003eDreyoo lock-on air chucks are heavy-duty brass tire inflator fittings that lock to valve stems, prevent air loss with an internal check valve, and speed up tire inflation and bead seating.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese four lock-on air chucks are designed as practical compressor accessories for home garages, workshops and off-road kits. Constructed from zinc-plated steel and brass-plated components, each chuck features a 1\/4\" FNPT quick connector thread, an automatic locking mechanism and an internal non-return valve to reduce blowback while you work.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these chucks stop air leakage during inflation?\u003c\/h3\u003e\n\u003cp\u003eEach chuck contains an internal check valve that closes the flow when disconnected from the valve stem, so pressure is held and air loss is minimized. The lock-on design clamps securely to the stem, preventing accidental release and maintaining consistent pressure while you move between tires.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInternal non-return check valve reduces backflow and preserves pressure.\u003c\/li\u003e\n  \u003cli\u003eThree-plated metal claws grip valve stems to prevent slippage.\u003c\/li\u003e\n  \u003cli\u003eQuick-release button allows controlled depressurization when needed.\u003c\/li\u003e\n  \u003cli\u003eSuitable up to approximately 300 psi working pressure for most inflations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these chucks easy to use on hard-to-reach or motorcycle valves?\u003c\/h3\u003e\n\u003cp\u003eThe lock-on head is specifically helpful when access is limited: you push the chuck onto the stem and it locks in place, freeing your hands for the compressor hose or bead seating. The compact profile and firm grip make them simple to attach even on tight valve locations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePush-and-lock action secures the chuck without holding it by hand.\u003c\/li\u003e\n  \u003cli\u003eCompact size fits motorcycle, trailer and passenger car valves.\u003c\/li\u003e\n  \u003cli\u003eWorks well for bead seating when inflating new or repaired tires.\u003c\/li\u003e\n  \u003cli\u003eQuick-connect 1\/4\" FNPT top thread for common compressor fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features do these air chucks have?\u003c\/h3\u003e\n\u003cp\u003eThese chucks combine zinc-plated steel bodies with metal-plated inner claws to resist rust and wear in regular workshop use. The robust construction keeps the locking mechanism reliable under repeated cycles and the 1\/4\" FNPT thread fits standard inflator lines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eZinc and brass-plated components improve corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eMetal-plated claws reduce oxidation at the contact points.\u003c\/li\u003e\n  \u003cli\u003eBuilt to withstand normal shop pressures and frequent use.\u003c\/li\u003e\n  \u003cli\u003eReinforced lock lever and release button for repeated operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will these chucks speed up multi-tire jobs or off-road maintenance?\u003c\/h3\u003e\n\u003cp\u003eBecause each chuck locks onto the valve stem, you can quickly move from tire to tire without constantly holding the fitting in place. That makes airing down, patching, refilling and bead seating faster and less fiddly—especially useful when servicing trucks, trailers or multiple vehicles at once.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLock-on action reduces time spent securing fittings during inflation.\u003c\/li\u003e\n  \u003cli\u003eFour chucks in the pack allow simultaneous or sequential tire work.\u003c\/li\u003e\n  \u003cli\u003eHelps speed bead seating and tire re-inflation after repairs.\u003c\/li\u003e\n  \u003cli\u003eUseful for home garages, off-road rigs and small fleet maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Dreyoo 4-pack lock-on air chucks suit DIY mechanics, small shops, off-road enthusiasts and anyone who needs reliable, leak-resistant connectors for regular tire work. If you inflate multiple tires, work on motorcycles or want a durable inflator head that locks in place, these chucks are a practical, cost-effective accessory to add to your air tool kit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What thread size do the Dreyoo air chucks use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They use a standard 1\/4\" FNPT top thread that fits common compressor fittings and quick connectors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these chucks prevent air from leaking when removed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each chuck has an internal check valve to reduce backflow and preserve tire pressure during service.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dreyoo","offers":[{"title":"Default Title","offer_id":55161071370583,"sku":"B0BYZHGYWX","price":33.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/dreyoo-front-view-lock-on-air-chuck-pack.jpg?v=1790321886"},{"product_id":"dorman-m14-1-5-wheel-nuts-10-pack-flanged-flat-face-19mm-hex-15-5mm-length-for-2003-2006-sprinter","title":"Dorman M14-1.5 Wheel Nuts 10-Pack — Flanged Flat Face, 19mm Hex, 15.5mm Length for 2003–2006 Sprinter","description":"\u003cp\u003e\u003cstrong\u003eDorman 611-295 wheel nuts are OEM-style flanged flat-face lug nuts made to the M14-1.5 specification, sold as a 10-pack for compatible 2003–2006 Dodge and Freightliner Sprinter models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts are manufactured to mirror the fit and function of the original equipment hardware used on specified Sprinter 2500 and 3500 vans. Built from hardened materials and finished to resist corrosion, they are sized and shaped to sit flush on compatible wheel types while providing secure clamping force when torqued to the vehicle manufacturer’s recommended specifications. Before installing, verify fitment by entering your make, model and trim in the garage tool to confirm compatibility with your wheel and hub.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my Sprinter or Freightliner van?\u003c\/h3\u003e\n\u003cp\u003eThese nuts are designed specifically for certain Dodge Sprinter and Freightliner Sprinter 2500\/3500 model years 2003–2006 that used M14-1.5 threaded lug hardware. Fit depends on wheel seat type and stud dimensions, so confirming your vehicle’s specs is important.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread size: M14 x 1.5 metric pitch\u003c\/li\u003e\n  \u003cli\u003eHex drive: 19 mm across flats\u003c\/li\u003e\n  \u003cli\u003eSeat style: flanged flat face for wheels requiring a flat contact surface\u003c\/li\u003e\n  \u003cli\u003eLength: 15.5 mm from underside of hex to end of nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these lug nuts compare to original equipment?\u003c\/h3\u003e\n\u003cp\u003eDorman engineered the 611-295 as a direct replacement that matches original geometry and mounting requirements. The goal is the same clamping interface and reliable service life, not a decorative or oversized aftermarket fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to OEM-like dimensions for correct wheel centering\u003c\/li\u003e\n  \u003cli\u003eMaterial and heat-treatment selected for strength and wear resistance\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finish to maintain function over time\u003c\/li\u003e\n  \u003cli\u003eSold in a 10-pack to replace all studs on dual-wheel or multiple-wheel applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and torque these lug nuts safely?\u003c\/h3\u003e\n\u003cp\u003eInstall nuts by hand to start threads, then use a torque wrench and follow the vehicle manufacturer’s torque sequence and specification. Avoid using impact tools as the final torque should be set with a calibrated wrench to ensure proper clamp load and wheel safety.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-thread each nut before tightening to avoid cross-threading\u003c\/li\u003e\n  \u003cli\u003eUse the vehicle manufacturer’s recommended torque value and pattern\u003c\/li\u003e\n  \u003cli\u003eRe-check torque after the first 50–100 miles driven following installation\u003c\/li\u003e\n  \u003cli\u003eIf unsure, consult a trusted mechanic or the vehicle’s service manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying these lug nuts?\u003c\/h3\u003e\n\u003cp\u003eConfirm thread pitch, hex size and seat type match your wheel studs and wheel contact surface. Wheels with tapered seats or specialty locking systems require different nuts, so verify visual and dimensional compatibility first.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify your stud thread is M14-1.5 and hex drive matches 19 mm\u003c\/li\u003e\n  \u003cli\u003eConfirm your wheel uses a flat seat with a flange to match the nut face\u003c\/li\u003e\n  \u003cli\u003eEnter make, model and trim into the garage tool to double-check vehicle fitment\u003c\/li\u003e\n  \u003cli\u003eReplace damaged or worn studs to ensure safe clamping pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers, fleet managers, and DIY mechanics who own or maintain 2003–2006 Dodge Sprinter 2500\/3500 or Freightliner Sprinter 2500\/3500 vehicles and need a reliable, OEM-style replacement lug nut. This 10-pack is also suited to small shops stocking parts for routine wheel service and owners replacing multiple worn or missing nuts. Always confirm fitment for your specific wheel and hub combination before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts compatible with tapered-seat wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These are flanged flat-face nuts designed for flat-seat wheels; tapered-seat wheels require conical\/tapered nuts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use an impact wrench to tighten these nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can start with an impact, but final torque must be set with a calibrated torque wrench to manufacturer specs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":55161099419991,"sku":"B0049E31CM","price":31.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/dorman-611-295-front-packaging.jpg?v=1790322234"},{"product_id":"dasbet-universal-trailer-wheel-lock-clamp-adjustable-7-11in-tire-fit-steel-body-waterproof-cap","title":"DASBET Universal Trailer Wheel Lock Clamp — Adjustable 7–11in Tyre Fit, Steel Body, Waterproof Cap","description":"\u003cstrong\u003eDASBET Universal Trailer Wheel Lock is a heavy-duty, adjustable wheel clamp designed to visibly secure wheels on cars, trailers, RVs and small vehicles to deter theft.\u003c\/strong\u003e\n\n\u003cp\u003eIf you need a simple, visible way to immobilize a wheel and discourage opportunistic thieves, this adjustable DASBET wheel clamp offers a steel-clad body, bright safety colors, and a waterproof locking cap. The clamp fits tires 7–11 inches wide and uses a crescent-shaped cylinder for stronger lock engagement. It ships with three keys and a soft-coated surface to reduce wheel damage while remaining easy to mount and remove.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the DASBET clamp stop a wheel from rolling?\u003c\/h3\u003e\n\u003cp\u003eThe clamp locks around the tire and rim so the wheel cannot turn when installed. Its high-strength steel plate body and crescent-shaped lock cylinder increase resistance to tampering compared with simpler locks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel plate construction for structural rigidity\u003c\/li\u003e\n  \u003cli\u003eCrescent-shaped lock cylinder for improved anti-tamper engagement\u003c\/li\u003e\n  \u003cli\u003eSoft-coated contact surfaces to avoid scratching rims\u003c\/li\u003e\n  \u003cli\u003eWaterproof cap over the keyway to limit dirt and corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this wheel lock easy to install and remove?\u003c\/h3\u003e\n\u003cp\u003eYes — the DASBET clamp is built for quick application. Unlock the unit, position it on the wheel, select the correct hole to match your tire width, then lock; removal is just the reverse. Average users can install or remove it in seconds without special tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable fit for 7–11 inch tire widths\u003c\/li\u003e\n  \u003cli\u003eSimple hole-position adjustment for secure clamping\u003c\/li\u003e\n  \u003cli\u003eNo extra tools required for normal installation\u003c\/li\u003e\n  \u003cli\u003eThree keys included to avoid lockout situations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and situations work best with this clamp?\u003c\/h3\u003e\n\u003cp\u003eThe design accommodates a wide range of small-to-medium vehicles and is ideal for parked or stored vehicles where visible deterrence is desired. Use it on trailers, RVs, golf carts, ATVs, motorcycles and passenger vehicles with compatible tire widths.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits cars, campers, RVs, trailers and light trucks\u003c\/li\u003e\n  \u003cli\u003eSuitable for motorcycles, ATVs and golf carts within width range\u003c\/li\u003e\n  \u003cli\u003eBright yellow and red finish increases visibility day and night\u003c\/li\u003e\n  \u003cli\u003eGood for long-term storage and temporary vehicle immobilization\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does DASBET protect the lock from weather and wear?\u003c\/h3\u003e\n\u003cp\u003eThe clamp combines corrosion-resistant design elements with protective finishes to extend service life. The lock cylinder is covered by a waterproof cap and the clamp’s coating helps resist scratches and surface rust.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWaterproof cap shields keyway from dirt and moisture\u003c\/li\u003e\n  \u003cli\u003eSoft-coating on clamp arms reduces rim damage\u003c\/li\u003e\n  \u003cli\u003eHigh-strength steel plate minimizes deformation under stress\u003c\/li\u003e\n  \u003cli\u003eBright color maintains visibility even after outdoor use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DASBET Universal Trailer Wheel Lock is aimed at owners of trailers, RVs, campers, small trucks, motorcycles, ATVs and passenger cars who want a no-fuss, visible anti-theft measure. It suits users who prioritize quick installation, broad compatibility (7–11 inch tires), and a lock built to handle outdoor storage conditions while minimizing damage to wheel surfaces.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tire widths does the DASBET wheel lock fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It adjusts to fit tires with widths from 7 to 11 inches, covering many cars, trailers, RVs and small vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the lock include spare keys and weather protection?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it includes three keys and a waterproof cap to protect the keyway from dirt and moisture.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DASBET","offers":[{"title":"Default Title","offer_id":55161099878743,"sku":"B0G4QT39LB","price":48.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/dasbet-front-view-wheel-lock.jpg?v=1790322257"},{"product_id":"aomacsi-spare-tire-cover-for-14-tires-23-62-27-16-waterproof-polyester-uv-protection-american-flag","title":"Aomacsi Spare Tyre Cover for 14\" Tyres (23.62\"–27.16\") — Waterproof Polyester, UV Protection, American Flag","description":"\u003cp\u003e\u003cstrong\u003eAomacsi's waterproof spare tire cover shields exposed tires from UV, rain, and grime, extending their usable life and keeping your vehicle looking sharp.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eLeft unprotected, a spare mounted outside can dry-crack, fade, and collect dirt — problems that shorten tire life and detract from your vehicle's appearance. This Aomacsi cover is made from high-grade waterproof polyester with a printed American flag design and elastic straps for tool-free fitting. It fits 14-inch wheel rims with tire diameters from 23.62 to 27.16 inches (60–69 cm) and is suitable for trailers, RVs, campers, vans, SUVs, trucks, and many off-road vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cover defend a spare tire against sun and weather?\u003c\/h3\u003e\n\n\u003cp\u003eThe fabric uses a dense weave and water-resistant coating that blocks UV rays and sheds rain. That reduces the risk of rubber degradation and keeps the surface free of acid-rain residue. The result is a protected tire that stays more flexible and visually intact over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-grade polyester resists fading and moisture penetration\u003c\/li\u003e\n  \u003cli\u003eWaterproof finish repels rain and road spray\u003c\/li\u003e\n  \u003cli\u003eUV-blocking properties help slow rubber deterioration\u003c\/li\u003e\n  \u003cli\u003eEasy-to-clean surface wipes down with a damp cloth\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it stay on while driving and how simple is installation?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is quick and tool-free: slip the cover over the spare, secure the elastic tether, and adjust for a snug fit. The elastic straps and flexible tether keep the cover from shifting or blowing off during normal travel, while remaining easy to remove when you need access to the tire.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eElastic hem for a tight, reliable fit\u003c\/li\u003e\n  \u003cli\u003eAdjustable tether prevents displacement at speed\u003c\/li\u003e\n  \u003cli\u003eCan be installed or removed in minutes by one person\u003c\/li\u003e\n  \u003cli\u003eNo tools required for mounting or removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich tire sizes and vehicles are compatible with this model?\u003c\/h3\u003e\n\n\u003cp\u003eChoose the correct cover based on your spare tire's outside diameter. The 14-inch cover fits tires with diameters between 60 and 69 cm. Aomacsi also offers 15-, 16-, and 17-inch variants to match larger wheel setups. Always measure your tire diameter before ordering to ensure a proper fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e14\" cover fits tire diameters 23.62\"–27.16\" (60–69 cm)\u003c\/li\u003e\n  \u003cli\u003eOther available sizes: 15\" (70–75 cm), 16\" (76–79 cm), 17\" (80–83 cm)\u003c\/li\u003e\n  \u003cli\u003eCompatible with RVs, trailers, campers, SUVs, trucks, and vans\u003c\/li\u003e\n  \u003cli\u003eRefer to product images for a simple diameter-measuring guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I care for the spare tire cover and keep the print vibrant?\u003c\/h3\u003e\n\n\u003cp\u003eThe cover wipes clean with water or a damp cloth and air-dries quickly; avoid harsh scrubbing or solvents that could erode the printed design. Storing the cover dry when not in use helps maintain the fabric and printed colors. Regular light cleaning prevents buildup from road grime and environmental deposits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpot-clean with mild soap and water; rinse thoroughly\u003c\/li\u003e\n  \u003cli\u003eAir-dry fully before storage to prevent mildew\u003c\/li\u003e\n  \u003cli\u003eAvoid bleach or abrasive cleaners to protect the print\u003c\/li\u003e\n  \u003cli\u003ePeriodic checks of the elastic tether keep the fit secure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Aomacsi spare tire cover suits owners who store a spare externally and want a durable, easy-care shield that preserves tire condition and boosts curb appeal. It’s ideal for RV and trailer owners, off-road enthusiasts, truck and SUV drivers, and anyone seeking a low-effort way to protect a visible spare without sacrificing style.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tire diameter does the 14-inch cover fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 14-inch Aomacsi cover fits spare tires with diameters from 60 to 69 cm (23.62–27.16 inches).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I clean the cover by hand?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — wipe stains with water or a damp cloth; avoid harsh chemicals and let it air-dry fully.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Aomacsi","offers":[{"title":"Default Title","offer_id":55161100009815,"sku":"B09829LF5F","price":33.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/aomacsi-front-view-flag-design.jpg?v=1790322255"},{"product_id":"milton-s693-dual-head-straight-foot-air-chuck-compact-workshop-inflator-for-schrader-presta","title":"Milton S693 Dual-Head Straight-Foot Air Chuck — Compact workshop inflator for Schrader \u0026 Presta","description":"\u003cstrong\u003eMilton S693 Dual Head Straight Foot Air Chuck is a compact dual-valve inflator head designed for fast, secure connections to both Schrader and Presta-style tire fittings.\u003c\/strong\u003e\n\n\u003cp\u003eCompact and engineered for workshop and garage use, the Milton S693 provides a straight-foot design with two seating points so you can switch between valve types without changing attachments. Built for durability and repeated use, this air chuck streamlines inflation tasks for bicycles, motorcycles, passenger vehicles, and workshop equipment while fitting standard air hose couplers.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the dual head design simplify inflation?\u003c\/h3\u003e\n\u003cp\u003eThe S693 features two valve interfaces in a single, straight-foot housing so you can reach and press onto different valve stems quickly. This avoids fumbling with multiple adaptors and keeps air flow steady during pressure-up or bleed-off.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo integrated valve seats for Schrader and smaller Presta-style fittings\u003c\/li\u003e\n  \u003cli\u003eStraight-foot profile for easy alignment on angled stems\u003c\/li\u003e\n  \u003cli\u003eSingle-handed connection reduces time spent toggling tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat build and size details matter for workshops?\u003c\/h3\u003e\n\u003cp\u003eThe Milton S693 is compact and robust, designed to tolerate repeated clamping and mild impacts common in busy garages. Its small packaged dimensions make it easy to store or fit into an inflator kit alongside gauges and hoses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage height about 16.51 cm, compact footprint for cabinets or kits\u003c\/li\u003e\n  \u003cli\u003ePackage length 1.651 cm and width 3.175 cm, making it a space-saving accessory\u003c\/li\u003e\n  \u003cli\u003eConstructed for regular auto-accessory use with standard couplers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this accessory integrate with existing inflator setups?\u003c\/h3\u003e\n\u003cp\u003eThe Milton S693 connects to common shop hoses and handheld inflators, acting as a straightforward interface between pressurized air and the valve stem. No special adapters are required when used with standard fittings, making it an easy add-on to most inflation systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits standard air hose fittings used in automotive and bike maintenance\u003c\/li\u003e\n  \u003cli\u003eStraight orientation helps access recessed or angled valve stems\u003c\/li\u003e\n  \u003cli\u003eWorks well with pressure gauges and regulators for controlled inflation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical maintenance and usage tips should I follow?\u003c\/h3\u003e\n\u003cp\u003eRegular inspection keeps the chuck seating and valve connections reliable. Simple cleaning and occasional lubrication of moving parts extend service life and maintain airtight performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect seals and threads periodically for wear or debris\u003c\/li\u003e\n  \u003cli\u003eWipe surfaces clean after use to prevent grit buildup\u003c\/li\u003e\n  \u003cli\u003eStore in a dry place to protect against corrosion and damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Milton S693 Dual Head Straight Foot Air Chuck is aimed at home mechanics, bike shops, motorcycle enthusiasts, taxi and fleet operators, and professional garages that need a compact, versatile inflator head. If you want a single, durable chuck that handles multiple valve types, reduces tool swapping, and fits standard hose systems, this Milton accessory is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Milton S693 fit both Schrader and Presta valves?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The S693 has two integrated valve interfaces to accommodate Schrader and smaller Presta-style stems without swapping adapters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this chuck with standard air hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The S693 is designed to connect to common workshop air hose fittings and works with most inflators and gauges.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Milton","offers":[{"title":"Default Title","offer_id":55161106530647,"sku":"B000COS0PG","price":30.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/milton-s693-front-view-dual-head.jpg?v=1790322343"},{"product_id":"baval-hard-storage-case-for-noco-air10-air15-air20-ultrafast-inflator-water-resistant-padded-protection-black","title":"Baval Hard Storage Case for NOCO AIR10\/AIR15\/AIR20 UltraFast Inflator — Water-Resistant, Padded Protection (Black)","description":"\u003cp\u003e\u003cstrong\u003eBaval's hard storage case protects NOCO AIR10, AIR15 and AIR20 UltraFast tire inflators from impacts, moisture and scratches while keeping accessories organized.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your NOCO UltraFast inflator safe and ready with a purpose-built carrying case from Baval. This molded, water-resistant case combines a tough exterior with a soft velvet interior to prevent dents and abrasions. It zips open smoothly, fits neatly into trunks or garages, and delivers compact, dependable protection for your inflator and small accessories.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this case protect my NOCO inflator during transport?\u003c\/h3\u003e\n\n\u003cp\u003eThe case uses a durable outer shell that resists crushing and impact while a padded velvet lining cushions the inflator to prevent surface damage. A firm internal structure holds the device in place so it won’t shift inside during travel.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSturdy exterior resists deformation and collision damage\u003c\/li\u003e\n  \u003cli\u003eSoft velvet interior reduces scratches and abrasion\u003c\/li\u003e\n  \u003cli\u003eForm-fitting dimensions prevent movement inside the case\u003c\/li\u003e\n  \u003cli\u003eSmooth zipper keeps the inflator secured during transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this case keep my NOCO inflator safe from moisture and wear?\u003c\/h3\u003e\n\n\u003cp\u003eBaval designed the case from wear-resistant, water-repellent materials that help block moisture and everyday grime. While not a submersible container, it provides strong protection against damp trunks, rain exposure, and oil or dust in workshops.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWater-resistant outer material keeps moisture at bay\u003c\/li\u003e\n  \u003cli\u003eDurable construction resists wear and abrasion over time\u003c\/li\u003e\n  \u003cli\u003eSeam and zipper design reduce water ingress during light exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich NOCO models and accessories fit inside this case?\u003c\/h3\u003e\n\n\u003cp\u003eThe interior is molded to accommodate NOCO AIR10, AIR15 and AIR20 UltraFast inflators and leaves room for small accessories like inflation nozzles and short hoses. Check the external dimensions to ensure it suits your storage needs and accessory count.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with NOCO AIR10, AIR15, AIR20 UltraFast inflators\u003c\/li\u003e\n  \u003cli\u003eSpace for small accessories (nozzles, adapters, short hose)\u003c\/li\u003e\n  \u003cli\u003eExternal dimensions: 10.51 × 7.87 × 3.74 inches for quick reference\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to use and store the Baval case daily?\u003c\/h3\u003e\n\n\u003cp\u003eThe case opens smoothly with a reliable zipper and its compact shape fits neatly on shelves, in glove boxes, or inside vehicle trunks. Its rigid profile prevents flattening, so you can stack items around it without risking pressure on the inflator.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSmooth zipper for quick access and secure closure\u003c\/li\u003e\n  \u003cli\u003eCompact footprint stores easily in cars or garages\u003c\/li\u003e\n  \u003cli\u003eRigid structure keeps form when packed or stacked with other items\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Baval hard case is ideal for owners of NOCO AIR10, AIR15 or AIR20 UltraFast inflators who want durable, travel-ready protection and organized storage. It suits drivers who keep inflators in vehicles, DIY enthusiasts who store tools in garages, and anyone seeking a compact case that prevents moisture, scratches and impact damage. Note: case sold separately — inflator and accessories are not included.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this case fit NOCO AIR10, AIR15 and AIR20?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Baval hard case is designed to accommodate NOCO AIR10, AIR15 and AIR20 UltraFast inflators.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the inflator and accessories included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The listing includes only the Baval protective case; inflator and accessories are sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Baval","offers":[{"title":"Default Title","offer_id":55161106694487,"sku":"B0F87ZM5HY","price":49.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/baval-front-view-hard-case.jpg?v=1790322354"},{"product_id":"efinluky-rv-spare-tire-cover-15-inch-happy-camper-bear-american-flag-waterproof-uv-resistant","title":"EFINLUKY RV Spare Tyre Cover 15-inch — Happy Camper Bear American Flag, Waterproof UV-Resistant","description":"\u003cp\u003e\u003cstrong\u003eEFINLUKY Happy Camper Bear RV spare tire cover is a waterproof, UV-resistant 15-inch protector that shields your trailer or RV spare while adding a patriotic, scenic design.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis durable spare tire cover combines practical protection with eye-catching artwork to keep your spare clean, dry, and protected from sun, rain, dust, and road grime. Crafted from heavy-duty polyester fiber, the cover fits common 15-inch spare tires (70–75 cm \/ 27.5–29.5 in outer diameter) and installs quickly without tools. It’s an easy, affordable way to refresh the look of your trailer, RV, SUV or truck while extending the life of the exposed spare.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this cover protect my spare tire outdoors?\u003c\/h3\u003e\n\u003cp\u003eThe EFINLUKY cover is made from waterproof, dustproof polyester with sun-resistant and anti-corrosion properties, forming a barrier against the elements. It reduces fading, prevents dirt buildup, and helps stop cracks that appear when rubber is repeatedly exposed to UV and moisture.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWaterproof fabric repels rain and snow to keep the tire dry.\u003c\/li\u003e\n  \u003cli\u003eUV-resistant coating helps minimize sun damage and fading.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion construction reduces contact with contaminants.\u003c\/li\u003e\n  \u003cli\u003eSnug elastic hem retains shape across temperature changes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my vehicle’s spare tire and how easy is it to install?\u003c\/h3\u003e\n\u003cp\u003eThis model is sized for 15-inch spares with a tire diameter of 70–75 cm (27.5–29.5 in). The cover slips on and off without tools; a stretchable hem and secure fit keep it in place during travel and while parked.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for trailers, travel trailers, RVs, SUVs and trucks with 15-inch spares.\u003c\/li\u003e\n  \u003cli\u003eElasticized edge ensures a quick, tool-free pull-on installation.\u003c\/li\u003e\n  \u003cli\u003eLightweight and foldable for compact trunk or storage when not in use.\u003c\/li\u003e\n  \u003cli\u003eMeasure your tire diameter to confirm fit before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Happy Camper Bear design enhance my vehicle’s appearance?\u003c\/h3\u003e\n\u003cp\u003eThe cover features a colorful Happy Camper Bear motif with an American flag theme, turning an exposed spare into a decorative accent. It refreshes the rear look of your vehicle and adds a personalized, travel-ready flair that complements camping, national-park, or patriotic styles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBright, detailed print improves curb appeal instantly.\u003c\/li\u003e\n  \u003cli\u003eArtwork resists fading from sun exposure when cared for properly.\u003c\/li\u003e\n  \u003cli\u003eWorks well with matching outdoor gear and RV decor themes.\u003c\/li\u003e\n  \u003cli\u003eSuitable for both casual travelers and long-term campers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about care, durability and warranty?\u003c\/h3\u003e\n\u003cp\u003eThe polyester construction is built to withstand normal outdoor use and maintain shape across temperature changes. Clean by wiping with a damp cloth or gentle hand wash; avoid harsh chemicals. EFINLUKY offers customer support if you experience any issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable polyester resists sun, dust and light moisture.\u003c\/li\u003e\n  \u003cli\u003eWipe-clean or gentle hand wash recommended to preserve print.\u003c\/li\u003e\n  \u003cli\u003eStore folded in glovebox or trunk when not in use to save space.\u003c\/li\u003e\n  \u003cli\u003eContact EFINLUKY customer service for support or questions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The EFINLUKY Happy Camper Bear 15-inch spare tire cover is ideal for RV owners, travel trailer and camper enthusiasts, and truck or SUV owners who want to protect their spare while adding a distinctive, patriotic design. Choose this cover if you need an affordable, easy-to-install protector that improves your vehicle’s appearance, shields the spare from weather and road debris, and packs away conveniently when not needed.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tire sizes does the 15-inch EFINLUKY cover fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 15-inch cover fits tire diameters of 70–75 cm (27.5–29.5 inches). Measure your spare’s outer diameter before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I clean and store the spare tire cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Wipe with a damp cloth or hand wash gently. Fold and store in your trunk or glove compartment when not in use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EFINLUKY","offers":[{"title":"Default Title","offer_id":55161122521431,"sku":"B0CDB38WDH","price":32.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/efinlucky-front-view-15in-tire-cover.jpg?v=1790322479"},{"product_id":"ar-pro-18x7-50-8-tubeless-lawn-mower-tires-2-pack-4pr-durable-turf-friendly-traction","title":"AR-PRO 18x7.50-8 Tubeless Lawn Mower Tyres (2-Pack) — 4PR Durable, Turf-Friendly Traction","description":"\u003cp\u003e\u003cstrong\u003eThese AR-PRO 18x7.50-8 tubeless tires are a 2-pack replacement set built with 4-ply strength to give lawn mowers, garden tractors and golf carts reliable turf-friendly traction and long wear.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mower or small garden tractor needs an 18x7.50-8 tire replacement, this pair from AR-PRO is sized for standard 8-inch rims and designed for non-highway, turf use. Each tire has a 7.5\" section width, a 17.99\" overall diameter and a 5mm tread depth that balances grip with minimal turf disturbance. The tubeless, 4PR construction focuses on durability, load capacity and easy installation so you can get back to yard work quickly.\u003c\/p\u003e\n\n\u003ch3\u003eWill these tires fit my riding lawn mower or garden tractor?\u003c\/h3\u003e\n\n\u003cp\u003eThese tires are compatible with equipment that specifies 18x7.50-8 (also written 18x7.5x8 or 18x7.5-8). They are made for standard 8-inch rims; rims are not included with the tires. Always check your current tire sidewall and owner’s manual to confirm size and rim diameter before purchasing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSize: 18x7.50-8 compatible with common lawn tractor tire markings.\u003c\/li\u003e\n  \u003cli\u003eRim fit: designed for 8\" rim diameter.\u003c\/li\u003e\n  \u003cli\u003eIntended use: non-highway, turf and garden equipment only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and load-capable are these AR-PRO tires?\u003c\/h3\u003e\n\n\u003cp\u003eBuilt with a 4-ply rubber construction, the tires resist cracking, punctures and general wear for extended service life under normal lawn use. Each tire carries a rated load capacity up to 805 lbs at 24 PSI, offering stable performance for heavy mowers and utility carts when inflated to manufacturer recommendations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e4PR rating delivers reinforced sidewall strength.\u003c\/li\u003e\n  \u003cli\u003e805 lb load capacity per tire at 24 PSI for heavy loads.\u003c\/li\u003e\n  \u003cli\u003ePremium rubber mix reduces everyday wear and tearing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these tires protect my grass while giving good traction?\u003c\/h3\u003e\n\n\u003cp\u003eThe tread pattern uses compact tread blocks to improve traction on grass and slopes while minimizing turf scuffing. With approximately 5mm tread depth, the design balances traction and a smooth ride so you maintain control without rutting or excessive turf damage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTread blocks engineered for grip on grassy and uneven surfaces.\u003c\/li\u003e\n  \u003cli\u003e5mm tread depth for stable handling and reduced turf impact.\u003c\/li\u003e\n  \u003cli\u003eSuitable for slopes, lawns, and garden paths where gentle contact matters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and maintenance for these tubeless tires?\u003c\/h3\u003e\n\n\u003cp\u003eThe tubeless design simplifies mounting and eliminates inner tubes, reducing leak points and routine maintenance. A secure bead helps form an airtight seal on compatible rims so once properly installed and inflated, these tires are largely maintenance-free for typical lawn-care seasons.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTubeless setup removes need for inner tubes.\u003c\/li\u003e\n  \u003cli\u003eSecure bead seat for reliable air retention on proper rims.\u003c\/li\u003e\n  \u003cli\u003eQuick installation with common tire mounting tools or at a shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These AR-PRO 18x7.50-8 tires are aimed at homeowners, landscapers and small-farm operators who need dependable, turf-friendly replacements for riding lawn mowers, garden tractors and small utility carts. If you require tires that fit 8\" rims, support heavier loads, and prioritize a balance between traction and minimal lawn disturbance, this two-pack offers practical durability and value without rims or tubes included.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are rims included with these tires?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These AR-PRO tires are sold without rims; they fit standard 8-inch rims.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these tires be used on slopes and wet grass?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The tread provides improved traction on grassy and sloped surfaces while minimizing turf damage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AR-PRO","offers":[{"title":"Default Title","offer_id":55161163284823,"sku":"B0G13QXN7K","price":148.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ar-pro-front-view-packaged-tires.jpg?v=1790322629"},{"product_id":"tireminder-2-pack-brass-tpms-transmitters-for-tmg400c-tm66-a1a-valve-cap-replacements-cr1632-battery","title":"TireMinder 2-Pack Brass TPMS Transmitters for TMG400C TM66 A1A — Valve-Cap Replacements, CR1632 Battery","description":"\u003cp\u003e\u003cstrong\u003eCompact brass valve-cap transmitters that replace valve stems to restore TireMinder TPMS function on RVs, trailers, motorhomes and cars.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two brass transmitters are spare\/replacement sensors designed to work with TireMinder TPMS models TMG400C, TM66 and A1A. They fit brass and stainless steel valve stem applications and install like an ordinary valve cap so you don’t need special tools. Each transmitter runs on a replaceable CR1632 battery that typically lasts many months, giving a simple way to maintain continuous tire-pressure monitoring without swapping whole sensor assemblies.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these transmitters install and pair with my TireMinder unit?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward: screw the transmitter onto the valve stem in place of the original cap, then follow your TireMinder monitor’s sync procedure to pair it. The small, lightweight design makes them unobtrusive on every wheel.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eScrews on like a valve cap—no disassembly required\u003c\/li\u003e\n  \u003cli\u003ePairs with TireMinder TMG400C, TM66 and A1A models\u003c\/li\u003e\n  \u003cli\u003eWorks with brass or stainless steel valve stems\u003c\/li\u003e\n  \u003cli\u003eLightweight 0.5 oz profile keeps the cap out of the way\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the battery life and maintenance expectations?\u003c\/h3\u003e\n\n\u003cp\u003eEach transmitter uses a CR1632 coin cell that is replaceable and typically lasts between 9–14 months depending on conditions and usage. Replacing the battery is a quick swap so you can extend the transmitter’s service life instead of replacing the entire unit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUses common CR1632 coin battery for easy sourcing\u003c\/li\u003e\n  \u003cli\u003eEstimated 9–14 month lifespan under normal use\u003c\/li\u003e\n  \u003cli\u003eBattery replacement extends transmitter life and reduces waste\u003c\/li\u003e\n  \u003cli\u003eLightweight housing minimizes stress on the valve stem\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these work on my vehicle—RV, trailer, truck or car?\u003c\/h3\u003e\n\n\u003cp\u003eYes. These transmitters are made for universal fit on vehicle tires with brass (rubber) or steel valve stems, making them suitable for RVs, trailers, motorhomes, trucks and passenger cars. They’re especially useful as spares or replacements when one of your original transmitters gets lost or the battery is dead.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUniversal fit across common valve stem types\u003c\/li\u003e\n  \u003cli\u003eTwo-pack provides replacements for multiple wheels or a spare\u003c\/li\u003e\n  \u003cli\u003eCompact design works well on large and small wheels alike\u003c\/li\u003e\n  \u003cli\u003eIdeal for RV and trailer fleets where quick serviceability matters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect physically from the product?\u003c\/h3\u003e\n\n\u003cp\u003eThe transmitters are small, lightweight caps that look like standard valve covers but house the TPMS transmitter and battery. They weigh about 0.5 ounces each and are intended to stay out of the way while continuously sending tire-pressure data to the monitor.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSmall form factor similar to a valve cap for discreet appearance\u003c\/li\u003e\n  \u003cli\u003eBrass construction compatible with brass or stainless valve stems\u003c\/li\u003e\n  \u003cli\u003eReplaceable internal CR1632 battery for easy servicing\u003c\/li\u003e\n  \u003cli\u003eSold as a 2-pack so you can replace two caps or keep a spare\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Vehicle owners and fleet operators who already use a TireMinder TPMS (TMG400C, TM66 or A1A) and need reliable spare or replacement transmitters for brass or steel valve stems. These are ideal for RV and trailer owners who prefer an easy screw-on replacement, drivers keeping maintenance simple, and anyone who wants a lightweight, serviceable transmitter option without swapping entire sensor assemblies.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these transmitters compatible with TireMinder A1A and TMG400C?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This 2-pack is compatible with TireMinder A1A, TM66 and TMG400C monitors and pairs using the monitor’s standard sync procedure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What battery do these transmitters use and how long does it last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They use a replaceable CR1632 coin cell; expected life is roughly 9–14 months depending on usage and conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TireMinder","offers":[{"title":"Default Title","offer_id":55161170166103,"sku":"B00HAMP79K","price":100.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/tireminder-brass-transmitter-front-cap.jpg?v=1790322644"},{"product_id":"dicmic-12v-444c-chrome-dual-air-compressor-200-psi-compact-on-board-inflation-with-thermal-protection","title":"DICMIC 12V 444C Chrome Dual Air Compressor — 200 PSI, Compact On-Board Inflation with Thermal Protection","description":"\u003cp\u003e\u003cstrong\u003eThe DICMIC 12V 444C is a compact chrome-finish dual air compressor that delivers up to 200 PSI for rapid inflation of tires, small tanks, and air accessories.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for automotive and motorcycle use, this 12V air compressor balances high pressure output with a durable build and thermal protection for demanding conditions. It offers a fast fill rate and a duty cycle engineered to support continuous operation at moderate pressures, making it a practical on-board inflation solution for drivers, riders, and mobile technicians.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will the compressor inflate a small tank or tire?\u003c\/h3\u003e\n\u003cp\u003eThe DICMIC 444C is tuned for speed: it can fill a 2.5-gallon tank from empty to 200 PSI in approximately 2 minutes 30 seconds. Actual time varies with inlet pressure, hose length, and ambient temperature, but the unit's high-pressure capability ensures faster service than many single-stage compressors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFills a 2.5-gallon tank 0 → 200 PSI in ~2m30s under ideal conditions\u003c\/li\u003e\n  \u003cli\u003e10-second quick boost mode for short, high-pressure bursts\u003c\/li\u003e\n  \u003cli\u003e12V operation suitable for car or motorcycle battery power\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and durability features protect the compressor?\u003c\/h3\u003e\n\u003cp\u003eTo prevent damage during extended use, the compressor includes a built-in thermal overload protector that shuts the unit down if it overheats. The chrome finish and robust construction help resist corrosion and wear in roadside or garage environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThermal overload protection prevents overheating in harsh conditions\u003c\/li\u003e\n  \u003cli\u003eDuty cycle: 100% at 100 PSI, 50% at 200 PSI for predictable runtime\u003c\/li\u003e\n  \u003cli\u003eChrome housing for corrosion resistance and easy cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow suitable is this model for vehicle and motorcycle applications?\u003c\/h3\u003e\n\u003cp\u003eThis dual-value compressor is intended for automotive and motorcycle use where compactness and high pressure are needed. It runs from a standard 12V source and provides both continuous operation at common tire pressures and a short high-pressure capability for heavier tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperates from a 12V vehicle battery or accessory outlet\u003c\/li\u003e\n  \u003cli\u003e200 PSI max working pressure for high-pressure tires and accessories\u003c\/li\u003e\n  \u003cli\u003eCompact, chrome design fits typical vehicle mounts or storage spots\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat operating limits and maintenance should I expect?\u003c\/h3\u003e\n\u003cp\u003eObserve the stated duty cycle to avoid reduced lifespan: continuous use is fine at or below 100 PSI, but at 200 PSI runtime should be limited to the 50% duty cycle. Regularly inspect hoses and fittings for leaks and keep the compressor clean to maintain cooling and performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% duty cycle at 100 PSI; 50% duty cycle at 200 PSI\u003c\/li\u003e\n  \u003cli\u003eAllow cool-down periods when operating near max pressure\u003c\/li\u003e\n  \u003cli\u003eCheck connections, replace worn hoses, and keep vents clear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: drivers, motorcycle riders, and mobile technicians who need a powerful, compact 12V inflation tool that combines quick fill capability with thermal protection. If you want a unit that performs reliably for routine tire maintenance, emergency boosts, or filling small tanks and accessories, the DICMIC 12V 444C offers a balance of speed, pressure, and on-board practicality. For warranty or satisfaction issues, contact DICMIC customer support directly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I run the DICMIC 444C continuously?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use continuously at or below 100 PSI (100% duty cycle). At 200 PSI limit runtime to about 50% to avoid overheating.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it work from my car battery?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The compressor runs from a 12V source like a car or motorcycle battery; ensure good battery condition during heavy use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DICMIC","offers":[{"title":"Default Title","offer_id":55161170231639,"sku":"B0B45PKFSM","price":282.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/dicmic-chrome-front-view.jpg?v=1790322652"},{"product_id":"trq-front-wheel-hub-bearing-assembly-2-piece-kit-pre-assembled-oe-fit-for-toyota-lexus","title":"TRQ Front Wheel Hub \u0026 Bearing Assembly 2-Piece Kit — Pre-assembled OE-fit for Toyota \u0026 Lexus","description":"\u003cp\u003e\u003cstrong\u003eTRQ Front Wheel Bearing \u0026amp; Hub Assembly Set is a two-piece, pre-assembled driver and passenger front hub kit engineered as direct replacements for compatible Toyota and Lexus models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 2-piece kit includes one front driver-side and one front passenger-side wheel bearing and hub assembly built to match original equipment dimensions and mounting points. TRQ supplies these assemblies to restore proper wheel support, reduce vibration, and simplify installation with pre-packed bearings and sealed components. The kit is compatible with a wide range of Toyota and Lexus vehicles including GX460, GX470, 4Runner, FJ Cruiser, and Tacoma model years listed in the fitment section. Before ordering, verify vehicle year, drive type, and wheel position to ensure correct application.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles fit this TRQ front hub and bearing assembly?\u003c\/h3\u003e\n\u003cp\u003eThis kit is intended for front driver and passenger positions on specific Toyota and Lexus models across several model years. It fits both original equipment front hubs for vehicles with the listed year ranges and 4-wheel-drive configurations where noted.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLexus GX460: 2010–2023 front driver \u0026amp; passenger\u003c\/li\u003e\n  \u003cli\u003eLexus GX470: 2003–2009 front driver \u0026amp; passenger\u003c\/li\u003e\n  \u003cli\u003eToyota 4Runner: 2003–2024 4WD front driver \u0026amp; passenger\u003c\/li\u003e\n  \u003cli\u003eToyota FJ Cruiser: 2007–2014 4WD front driver \u0026amp; passenger\u003c\/li\u003e\n  \u003cli\u003eToyota Tacoma: 2005–2023 4WD front driver \u0026amp; passenger\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit make installation easier for DIYers?\u003c\/h3\u003e\n\u003cp\u003eTRQ supplies these hubs partially pre-assembled and balanced to match OE fitment, reducing preparation time and eliminating the need to press bearings in or out in most installations. The assemblies are designed to align with factory mounting points and hardware, so the swap is straightforward when following standard hub removal procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled bearing and hub units minimize press-fit work\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design aligns with factory bolt patterns and splines\u003c\/li\u003e\n  \u003cli\u003eTRQ offers dozens of step-by-step DIY videos to guide installation\u003c\/li\u003e\n  \u003cli\u003eIncludes driver and passenger assemblies for a matched front axle replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the component specs and reference numbers to verify fit?\u003c\/h3\u003e\n\u003cp\u003eThese are taper-bearing-style assemblies supplied as a matched two-piece set. TRQ lists many cross-reference numbers so you can confirm compatibility with existing parts and dealer references before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBearing type: Tapered\u003c\/li\u003e\n  \u003cli\u003eQuantity: 2-piece kit — front driver and passenger\u003c\/li\u003e\n  \u003cli\u003eCommon reference numbers include: 4350204080, 4350204120, 4357004010, 051-6470 and others\u003c\/li\u003e\n  \u003cli\u003eCheck your factory part number or the vehicle’s fitment chart for exact match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with these TRQ assemblies?\u003c\/h3\u003e\n\u003cp\u003eTRQ backs this kit with a limited lifetime warranty against workmanship and material defects when used as intended, excluding normal wear, misuse, or unauthorized modification. In addition to warranty coverage, TRQ provides a large library of installation videos and customer resources to help with troubleshooting and fit verification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLimited lifetime warranty for defects in materials and workmanship\u003c\/li\u003e\n  \u003cli\u003eExtensive online DIY video catalog to ‘‘View Before You Do’’\u003c\/li\u003e\n  \u003cli\u003eCompatibility guidance via fitment charts and retailer-confirmed fit tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This TRQ front wheel bearing and hub assembly set is aimed at vehicle owners, independent mechanics, and DIY enthusiasts who need a reliable, direct-fit replacement for worn front hubs on compatible Toyota and Lexus trucks and SUVs. It’s especially useful for those seeking a matched pair for the entire front axle, wanting to avoid press-fit bearing work, and who appreciate supplemental installation videos and a lifetime warranty backing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this TRQ kit fit my Tacoma 2016 4WD?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit covers Toyota Tacoma 2005–2023 4WD front driver and passenger positions. Verify with your VIN or factory part number for exact match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these hubs pre-assembled to avoid pressing bearings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — TRQ supplies these as pre-assembled\/taper-bearing-style hub units to reduce press-fit work and speed installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TRQ","offers":[{"title":"Default Title","offer_id":55161231769943,"sku":"B0GFGM17BC","price":242.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/trq-front-hub-assembly-pair-front-view.jpg?v=1790322694"},{"product_id":"lexani-235-40r19-lx-twenty-96w-xl-all-season-performance-tire-wet-traction-responsive-dry-handling","title":"Lexani 235\/40R19 LX-TWENTY 96W XL All-Season Performance Tyre — Wet Traction, Responsive Dry Handling","description":"\u003cp\u003e\u003cstrong\u003eThe 235\/40R19 Lexani LX-TWENTY 96W XL is an ultra-high-performance, all-season tire engineered for sharper steering, confident wet traction, and responsive dry handling for 19-inch wheels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Lexani LX-TWENTY blends a sporty asymmetric tread design with targeted grooves and sipes to balance dry-road precision and all-season grip. Built as an XL (extra load) 96W-rated tire in the 235\/40R19 size, it suits drivers who want performance-oriented steering response and reliable water evacuation without sacrificing everyday usability. This description covers how the tire works, what performance benefits to expect, and who will get the most from it.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the LX-TWENTY improve steering and handling on dry roads?\u003c\/h3\u003e\n\u003cp\u003eThe LX-TWENTY’s asymmetric tread layout and firm shoulder blocks deliver predictable cornering and crisp steering feedback. Reinforced ribs increase stability under lateral loads, so the tire confidently follows steering inputs at varying speeds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAsymmetric tread pattern for enhanced contact patch and directional stability\u003c\/li\u003e\n  \u003cli\u003eStiff shoulder blocks for improved corner grip and response\u003c\/li\u003e\n  \u003cli\u003eOptimized tread ribs that reduce flex under hard steering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features help the tire perform in wet conditions?\u003c\/h3\u003e\n\u003cp\u003eEngineered grooves and sipes channel water away from the contact patch to lower hydroplaning risk and maintain traction in rain. The LX-TWENTY balances groove volume with biting edges to retain grip while dispersing water efficiently.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWide circumferential grooves that evacuate standing water quickly\u003c\/li\u003e\n  \u003cli\u003eMultiple sipes to create extra biting edges for wet traction\u003c\/li\u003e\n  \u003cli\u003eAsymmetric channels designed to guide water away from the tire footprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the LX-TWENTY suitable for year-round use and varying road conditions?\u003c\/h3\u003e\n\u003cp\u003eAs an all-season design, the LX-TWENTY offers a compromise between summer-like handling and cold-weather traction for mild winters. It’s intended for drivers who need consistent performance across wet, dry, and lightly cool conditions rather than extreme winter capability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAll-season compound balances grip and tread life\u003c\/li\u003e\n  \u003cli\u003eUniversal fit type makes mounting straightforward across many 19-inch wheel options\u003c\/li\u003e\n  \u003cli\u003eXL (extra load) rating supports higher inflation and heavier loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect in terms of load and speed capability?\u003c\/h3\u003e\n\u003cp\u003eThe 96W load index and speed rating indicate the tire can carry a substantial load at sustained highway speeds typical for high-performance road use. The extra-load construction provides higher load capacity and increased robustness for sporty sedans and coupes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e96 load index supports a substantial per-tire load at recommended inflation\u003c\/li\u003e\n  \u003cli\u003eW speed rating suitable for high-speed driving within legal limits\u003c\/li\u003e\n  \u003cli\u003eXL construction increases load-carrying ability and sidewall strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The 235\/40R19 Lexani LX-TWENTY 96W XL is aimed at drivers with 19-inch wheels who want a performance-focused all-season tire: enthusiasts seeking sharper steering and reliable wet traction, owners of sporty sedans or coupes who carry moderate loads, and anyone looking for an economical performance option that balances handling, water evacuation, and everyday rideability. It is not meant for severe winter conditions or off-road use; for heavy snow or ice, a dedicated winter tire is recommended.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the LX-TWENTY good for winter driving?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s an all-season tire suited to mild cold and light snow but not designed for heavy snow or ice; use dedicated winter tires for severe conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What does 96W XL mean on this tire?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: 96 is the load index (per-tire load capacity) and W is the speed rating; XL indicates extra-load construction for higher load capability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lexani","offers":[{"title":"Default Title","offer_id":55161232130391,"sku":"B07YZMV2JM","price":340.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/lexani-lx-twenty-front-profile-235-40r19.jpg?v=1790322718"},{"product_id":"noco-air20-12v-portable-tire-inflator-air-compressor-47-lpm-100-psi-digital-gauge","title":"NOCO AIR20 12V Portable Tyre Inflator \u0026 Air Compressor — 47 LPM, 100 PSI, Digital Gauge","description":"\u003cp\u003e\u003cstrong\u003eThe NOCO AIR20 is a 12V portable tire inflator and air compressor that delivers 47 LPM airflow and up to 100 PSI for rapid, precise tire inflation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eCompact yet powerful, the AIR20 pairs a 280-watt motor with a high-flow design to inflate passenger tires quickly, accurately, and repeatedly from a direct 12‑volt battery connection. Built-in pressure sensing and dwell technology automatically pause and resume pumping to reach your target pressure without overfilling, while a bright digital display lets you set and monitor PSI, kPa, or bar. The unit includes a braided 3-foot hose, 20-foot power cord with battery clamps, multiple adapters, and a storage bag for roadside readiness.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast will the AIR20 inflate a flat tire?\u003c\/h3\u003e\n\u003cp\u003eThe AIR20 is engineered for speed: at 47 standard liters per minute it can take a common passenger tire from 0 to 40 PSI in about 2.5 minutes (tested on a 205-65R16 95H). It also reaches top-off pressures in seconds when you only need a quick boost.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e0–40 PSI in ~2.5 minutes on a typical car tire.\u003c\/li\u003e\n  \u003cli\u003eTop-off 35–40 PSI in under 25 seconds for quick checks.\u003c\/li\u003e\n  \u003cli\u003eContinuous 15-minute duty cycle lets you inflate multiple tires in one session.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat pressure range and accuracy can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe AIR20 supports precise pressure control between 15 and 100 PSI on its digital interface, with selectable units (PSI, kPa, bar). It also includes a manual mode for low-pressure tasks under 15 PSI like sports balls and pool toys.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDigital setpoint control from 15–100 PSI for repeatable fills.\u003c\/li\u003e\n  \u003cli\u003eIntegrated pressure sensor with dwell technology to prevent over-inflation.\u003c\/li\u003e\n  \u003cli\u003eManual mode for items requiring low pressure or custom inflation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and tires can the AIR20 handle?\u003c\/h3\u003e\n\u003cp\u003eDesigned for versatility, the AIR20 is suitable for most passenger cars, SUVs, motorcycles, ATVs, UTVs, lawn equipment, and light trucks with tire diameters up to 35 inches. It offers reference PSI ranges for common vehicle types so you can quickly identify target pressures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits tires up to 35\" diameter; ideal for cars, SUVs, and motorcycles.\u003c\/li\u003e\n  \u003cli\u003eUseful PSI references included for trailers, small trucks, and off-road vehicles.\u003c\/li\u003e\n  \u003cli\u003eAdapters and manual mode cover toys, sports gear, and Presta valves.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories and safety features are included?\u003c\/h3\u003e\n\u003cp\u003eThe AIR20 ships with practical accessories to get you inflating immediately and safely: a braided inflation hose, a long power cord with battery clamps, multiple inflation adapters, and an LED flashlight with several modes for roadside use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3-foot nylon-braided inflation hose for durability and kink resistance.\u003c\/li\u003e\n  \u003cli\u003e20-foot 14 AWG DC power cord with clamps to reach the battery easily.\u003c\/li\u003e\n  \u003cli\u003eNeedle, Presta, and inflatable toy adapters plus a microfiber storage bag.\u003c\/li\u003e\n  \u003cli\u003e60-lumen LED with six light modes including SOS for nighttime emergencies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The NOCO AIR20 is aimed at drivers, fleet users, and outdoor enthusiasts who want a fast, reliable 12V inflator with professional-level airflow and accurate digital control. It’s a good fit for anyone who needs rapid inflation on the road, the ability to handle multiple tires in one duty cycle, or a compact compressor that doubles as a general-purpose inflator for sports and inflatables. Backed by a 1-year limited warranty and practical onboard features, the AIR20 is built for consistent, repeatable performance during routine maintenance and emergency tire situations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the AIR20 work from a car cigarette lighter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the AIR20 requires a direct 12V battery connection using the included battery clamps for full 20‑amp performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it inflate large truck tires?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It handles tires up to 35 inches; heavy-duty truck tires over that size or above 100 PSI need a larger compressor.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"NOCO","offers":[{"title":"Default Title","offer_id":55161232195927,"sku":"B0D2PKNT3R","price":206.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/noco-air20-front-view.jpg?v=1790322719"},{"product_id":"richeer-2-inch-hubcentric-wheel-spacers-for-wrangler-jl-2018-2024-5x5-bolt-pattern-71-5mm-bore-forged-6061-t6","title":"Richeer 2-inch Hubcentric Wheel Spacers for Wrangler JL 2018–2024 — 5x5 bolt pattern, 71.5mm bore, forged 6061-T6","description":"\u003cp\u003e\u003cstrong\u003eRicheer 2-inch hubcentric wheel spacers widen your track for a more aggressive stance and improved handling on 2018–2024 Wrangler JL vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Richeer spacers are a bolt-on solution engineered to safely push wheels outward by 2 inches (50.8 mm) while remaining hubcentric to the vehicle’s 71.5 mm center bore. Machined from forged 6061-T6 billet aluminum and anodized for corrosion resistance, the kit includes 14x1.5 Grade 12.9 studs and nuts for higher tensile strength. The spacers are specified for 5x5\" (5x127 mm) bolt patterns and arrive as a set of four, designed to fit several Jeep and FCA platforms.\u003c\/p\u003e\n\n\u003ch3\u003eHow will 2\" spacers change my vehicle’s stance and wheel fitment?\u003c\/h3\u003e\n\n\u003cp\u003eInstalling these 2\" spacers moves each wheel outward, giving a wider track and a fuller, more aggressive look. The extra width helps tuck wider tires under the fenders and can improve visual balance without altering suspension geometry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2\" (50.8 mm) thickness per spacer for noticeable track increase\u003c\/li\u003e\n  \u003cli\u003eProvides room for larger tire and wheel combinations\u003c\/li\u003e\n  \u003cli\u003eHubcentric design maintains proper wheel centering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these spacers strong and safe for off-road use?\u003c\/h3\u003e\n\n\u003cp\u003eRicheer manufactures the spacers from forged 6061-T6 aluminum and CNC machines them for tight tolerances, giving a lightweight but durable component. The included Grade 12.9 studs and nuts offer higher tensile strength (around 1000 MPa) than common 10.9 hardware, increasing structural reliability under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForged 6061-T6 billet aluminum construction for strength and reduced weight\u003c\/li\u003e\n  \u003cli\u003eCNC precision machining for consistent hubcentric fit\u003c\/li\u003e\n  \u003cli\u003eGrade 12.9 studs with 14x1.5 thread pitch for superior tensile performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and bolt patterns are these spacers compatible with?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit is tailored to Jeep Wrangler JL models from 2018 to 2024 but also fits other platforms that share the 5x127 mm bolt pattern and a 71.5 mm hub bore. Always verify hub bore, bolt pattern, and brake clearance for your specific model and wheel combination before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible vehicles include 2018–2024 Wrangler JL and 2019–2024 Gladiator JT\u003c\/li\u003e\n  \u003cli\u003eAlso fits Grand Cherokee WK2\/WL (2011–2024) and Durango (2011–2023) where applicable\u003c\/li\u003e\n  \u003cli\u003eSpecification: 5x5\" (5x127 mm) bolt pattern, 71.5 mm center bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and maintenance details should I know?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation requires proper torque sequence and hub cleaning to ensure the spacer seats flush against the hub. Periodic re-torque and inspections are recommended, especially after heavy off-road use, to maintain safety and alignment of wheel hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes four 2\" spacers, Grade 12.9 studs and nuts (14x1.5 thread)\u003c\/li\u003e\n  \u003cli\u003eSurface anodized finish for corrosion protection in harsh conditions\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer torque specs and retorque after initial miles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Richeer 2\" hubcentric wheel spacer kit is aimed at Wrangler JL owners and compatible Jeep or FCA drivers who want a wider stance, improved tire clearance, and stronger wheel fasteners without changing suspension parts. It’s suitable for enthusiasts upgrading wheel\/tire setups, off-roaders seeking traction advantages, and anyone wanting a more aggressive look while maintaining hubcentric alignment and high-grade hardware.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these spacers fit my 2019 Jeep Gladiator JT?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The spacers fit 2019–2024 Gladiator JT models with a 5x127 mm bolt pattern and 71.5 mm hub bore.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the spacers include studs and nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes Grade 12.9 14x1.5 threaded studs and matching nuts for all four spacers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Richeer","offers":[{"title":"Default Title","offer_id":55161232720215,"sku":"B0BXBWG61Q","price":199.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/richeer-front-facing-spacer-kit.jpg?v=1790322743"},{"product_id":"dynofit-1-5-in-wheel-spacers-5x127-71-5mm-for-jeep-jk-wk-xk-4pc-forged-hub-centric","title":"dynofit 1.5 in Wheel Spacers 5x127 (71.5mm) for Jeep JK\/WK\/XK — 4pc Forged Hub-Centric","description":"\u003cp\u003e\u003cstrong\u003eThese dynofit 1.5\" wheel spacers are forged, hub-centric adapters that safely widen the track of compatible Jeep models (5x127 PCD, 71.5mm bore) to improve clearance and stance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for Jeep owners who need more wheel offset for fitment, improved stance, or extra tire clearance, these spacers fit specific Jeep Wrangler JK, Grand Cherokee WJ\/WK and Commander XK years. Machined from 6061-T6 aluminum with a forged process, they use 1\/2\"-20 studs and come as a set of four with open lug nuts and DACROMAT-treated hardware. The package is intended to maintain hub-centric alignment and provide a stronger, lightweight solution compared with cheaper cast alternatives.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Jeep models and years will these spacers fit?\u003c\/h3\u003e\n\u003cp\u003eThese spacers are compatible with selected Jeep models that share a 5x127mm bolt pattern and a 71.5mm hub bore. They do not fit newer Wrangler JL models—confirm your vehicle year and hub dimensions before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWrangler JK: 2007–2018 (Sport, Sport S, Sahara, Rubicon)\u003c\/li\u003e\n  \u003cli\u003eGrand Cherokee WJ\/WK: 1999–2010\u003c\/li\u003e\n  \u003cli\u003eCommander XK: 2005–2010\u003c\/li\u003e\n  \u003cli\u003eWheel pattern: 5x5\" (5x127mm); hub bore: 71.5mm; thickness: 1.5\" (38.1mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these spacers made and what materials are used?\u003c\/h3\u003e\n\u003cp\u003eDynofit uses forged 6061-T6 aluminum for the spacers, then CNC machines the parts to final tolerances and anodizes the surface for corrosion resistance. Fasteners receive DACROMAT treatment to improve hardness and limit rust, producing a stronger, longer-lasting assembly than many cast alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForged 6061-T6 aluminum construction for high strength-to-weight ratio\u003c\/li\u003e\n  \u003cli\u003eCNC machining for precise hub-centric fit and balanced bolt pattern\u003c\/li\u003e\n  \u003cli\u003eDACROMAT-treated bolts for added corrosion resistance and durability\u003c\/li\u003e\n  \u003cli\u003ePackaged with 20 open lug nuts for straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre the supplied bolts safe and why choose Grade 10.9 hardware?\u003c\/h3\u003e\n\u003cp\u003eThe set uses Grade 10.9 studs rather than higher-hardened but brittle alternatives. Grade 10.9 offers a balance of tensile strength and ductility so, under extreme load, the hardware is more likely to bend rather than fracture—an important safety consideration for wheel attachment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGrade 10.9 studs for strong, ductile performance under stress\u003c\/li\u003e\n  \u003cli\u003eRecommended torque and follow-up inspections after installation\u003c\/li\u003e\n  \u003cli\u003eDACROMAT finish reduces surface corrosion and extends service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and fitment benefits can I expect after installation?\u003c\/h3\u003e\n\u003cp\u003eInstalling these spacers increases track width, which can improve visual stance and create clearance for larger tires or aftermarket brakes. They also help correct wheel backspacing when switching rim designs, while maintaining a hub-centric interface for reduced vibration risk.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWider track for a more aggressive look and improved wheel clearance\u003c\/li\u003e\n  \u003cli\u003eResolves backspacing and rubbing issues with larger or offset wheels\u003c\/li\u003e\n  \u003cli\u003eHub-centric design reduces runout and vibration when installed correctly\u003c\/li\u003e\n  \u003cli\u003eLightweight aluminum construction minimizes added unsprung mass\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These dynofit wheel spacers are aimed at Jeep owners who need a reliable, lightweight adapter to fit wider wheels or tires, avoid rubbing with aftermarket rims, or achieve a more aggressive stance—while keeping a hub-centric solution and durable hardware. If you drive a compatible JK, WJ\/WK, or XK model and prefer forged aluminum parts with treated fasteners and clear installation guidance (including alignment after fitment), this kit is a practical option. Always confirm year\/model compatibility and follow torque specs and safety checks after installation; dynofit also recommends using a small adhesive during mounting and offers a one-year warranty plus a 30-day refund policy for added confidence.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these spacers fit my 2012 Jeep Wrangler JK?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they fit 2007–2018 Wrangler JK models, but confirm your wheel PCD is 5x127 and hub bore is 71.5mm before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need an alignment after installing these spacers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: An alignment is recommended after installation to ensure proper handling and even tire wear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"dynofit","offers":[{"title":"Default Title","offer_id":55161232785751,"sku":"B078RHXMYC","price":174.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/dynofit-front-face-spacer.jpg?v=1790322741"},{"product_id":"autel-mx-tpms-sensor-programmable-dual-frequency-315-433mhz-lightweight-11-g-batch-programmable","title":"Autel MX TPMS Sensor — Programmable Dual-Frequency 315\/433MHz, Lightweight 11 g, Batch-Programmable","description":"\u003cp\u003e\u003cstrong\u003eAutel MX TPMS Sensors are programmable dual-frequency tire-pressure sensors designed to replace most OE sensors with one universal, high-signal, lightweight unit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered for professional tire shops and tech-savvy DIYers, the Autel MX sensor combines 315MHz and 433MHz compatibility in a single body so one SKU covers almost every TPMS-equipped vehicle. These sensors are intended to be programmed with Autel diagnostic tools, offer strong wireless signaling even once mounted, and follow industry testing and warranty standards for reliable service life.\u003c\/p\u003e\n\n\u003ch3\u003eHow do Autel MX sensors simplify TPMS inventory for shops?\u003c\/h3\u003e\n\u003cp\u003eInstead of stocking many vehicle-specific sensors, shops can carry one programmable MX sensor that fits most applications. This reduces parts complexity, lowers holding costs, and speeds up repairs because a single sensor can be configured for different vehicles with Autel tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1-SKU approach replaces multiple part numbers\u003c\/li\u003e\n  \u003cli\u003eDual 315\/433MHz coverage for broad vehicle compatibility\u003c\/li\u003e\n  \u003cli\u003eBatch programming capability speeds multi-sensor installs\u003c\/li\u003e\n  \u003cli\u003eLightweight 11 g body for stable mounting and handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and programming steps are required?\u003c\/h3\u003e\n\u003cp\u003eAutel MX sensors use a press-in rubber\/metal valve design for straightforward replacement on compatible wheels. They must be programmed using Autel TPMS tools — programming can be done wirelessly while the sensor is already installed, and Autel supports cloning original sensor IDs to avoid a relearn step when appropriate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePress-in valve style for quick physical replacement\u003c\/li\u003e\n  \u003cli\u003eProgram with Autel TPMS scanners or tools only\u003c\/li\u003e\n  \u003cli\u003eWireless programming works after mounting to the wheel\u003c\/li\u003e\n  \u003cli\u003eCloning option allows reuse of original sensor ID without relearn\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does signal strength, battery life and weight affect performance?\u003c\/h3\u003e\n\u003cp\u003eStrong RF transmission improves communication with the vehicle’s receiver and with Autel programming tools, especially useful during batch setup. MX sensors are designed to match OE battery longevity and are constructed from quality materials to maintain reliability. At roughly 11 grams, the sensor is lighter than many alternatives, helping maintain wheel balance and sensor stability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh signal strength for consistent wireless reads and programming\u003c\/li\u003e\n  \u003cli\u003eBattery selection and construction aimed to match OE runtimes\u003c\/li\u003e\n  \u003cli\u003eLower sensor weight promotes wheel stability and reduces stress\u003c\/li\u003e\n  \u003cli\u003eBatch programming up to 20 sensors with compatible Autel tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat certifications, warranty and support come with Autel MX sensors?\u003c\/h3\u003e\n\u003cp\u003eAutel MX sensors undergo SAE-standard testing and are produced under strict quality control, including a unique series number on each sensor for traceability. They carry a limited warranty against manufacturing defects for 24 months or 24,000 miles, and genuine Autel sensors purchased as \"Autel Exclusive\" receive direct after-sales support from Autel US.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSAE J1205 \/ J1206 testing compliance\u003c\/li\u003e\n  \u003cli\u003eUnique serial\/series number for quality tracking\u003c\/li\u003e\n  \u003cli\u003e24 months or 24,000 miles limited warranty coverage\u003c\/li\u003e\n  \u003cli\u003eOfficial Autel US support when labeled \"Autel Exclusive\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Autel MX TPMS sensors are ideal for tire shops, fleet maintenance teams, and independent technicians who want to minimize part SKUs and speed TPMS repairs. They also suit experienced DIYers with Autel diagnostic tools who need a single, high-coverage sensor to service a wide range of passenger vehicles and light trucks. Remember: these sensors require Autel tools for programming and cloning; choose Autel MX when you want broad compatibility, strong RF performance, and official Autel support for TPMS replacements.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do Autel MX sensors work with all vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They cover most TPMS-equipped passenger vehicles thanks to dual 315\/433MHz support, but check vehicle compatibility and use an Autel tool to confirm programming options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I program Autel MX sensors without special tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Autel MX sensors must be programmed or cloned using compatible Autel TPMS tools for proper operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autel","offers":[{"title":"Default Title","offer_id":55161232818519,"sku":"B0BHNW1G8Q","price":124.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/autel-mx-front-packaging.jpg?v=1790322745"},{"product_id":"gearwrench-universal-programmable-tpms-sensor-4-pack-dual-frequency-315-433-mhz-metal","title":"GEARWRENCH Universal Programmable TPMS Sensor 4-Pack, Dual-Frequency 315\/433 MHz Metal","description":"\u003cp\u003e\u003cstrong\u003eGEARWRENCH Universal Programmable Metal TPMS Sensor 4-Pack is a dual-frequency, cloneable tire pressure monitoring sensor engineered to replace OE units quickly and cover nearly every vehicle.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe GWTPMSM4PK gives repair shops and DIYers a single, robust sensor that handles both 315 MHz and 433 MHz systems, can clone original sensor IDs, and programs in seconds with compatible GEARWRENCH TPMS tools. Built to match OE-level readings for pressure and temperature, this four-pack simplifies inventory and reduces vehicle downtime by minimizing relearn steps after installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sensor make TPMS replacements faster?\u003c\/h3\u003e\n\u003cp\u003eBy supporting ID cloning and universal fitment, the GEARWRENCH sensor eliminates many programming steps that normally slow a service. Once cloned with a GEARWRENCH TPMS tool, the vehicle accepts the sensor without a relearn procedure, cutting labor and turnaround time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% ID cloning reproduces original sensor identifiers so the ECU recognizes the unit immediately\u003c\/li\u003e\n  \u003cli\u003ePrograms in seconds with GEARWRENCH TPMS programming tools\u003c\/li\u003e\n  \u003cli\u003eUniversal fit reduces time spent matching part numbers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work on my vehicle and radio frequency?\u003c\/h3\u003e\n\u003cp\u003eThe GWTPMSM4PK is engineered for broad compatibility, covering roughly 99% of global vehicle applications by supporting both common TPMS frequencies. That means one sensor can serve many makes and models without guessing which frequency is needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-frequency support: 315 MHz and 433 MHz in a single unit\u003c\/li\u003e\n  \u003cli\u003eCompatible with an extensive range of passenger cars, SUVs, and light trucks\u003c\/li\u003e\n  \u003cli\u003eReduces need for multiple stock SKUs in workshops\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat level of performance and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eDesigned to mirror original equipment measurements, the sensor delivers accurate pressure and temperature feedback and reliable battery performance under normal driving conditions. The metal construction provides ruggedness for long-term service while maintaining precise data output for TPMS systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-level accuracy for pressure and temperature readings\u003c\/li\u003e\n  \u003cli\u003eMetal housing for improved durability and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eEngineered for consistent performance across typical service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich tools and steps are required to program and install this sensor?\u003c\/h3\u003e\n\u003cp\u003eProgramming is straightforward when you use a compatible GEARWRENCH TPMS programming or diagnostic tool. After cloning or programming, standard installation procedures apply; because IDs can be cloned, many vehicles accept the sensor without a formal relearn.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse GEARWRENCH TPMS Tools for fast programming and diagnostics\u003c\/li\u003e\n  \u003cli\u003eInstall with standard valve hardware and torque to manufacturer specs\u003c\/li\u003e\n  \u003cli\u003eCloning often removes the need for ECU relearn procedures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The GEARWRENCH GWTPMSM4PK 4-pack is ideal for independent repair shops, fleet maintenance operations, and knowledgeable DIYers who need versatile, quick-to-program sensors that cut inventory complexity. If you want to reduce time spent diagnosing TPMS faults, minimize parts stocking, and use a single sensor across most vehicles, this kit is built to simplify those workflows without sacrificing measurement accuracy or durability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this sensor support both 315 MHz and 433 MHz vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The GWTPMSM4PK is dual-frequency and supports both 315 MHz and 433 MHz systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a special tool to program it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You need a GEARWRENCH TPMS programming or diagnostic tool to clone or program this sensor quickly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GEARWRENCH","offers":[{"title":"Default Title","offer_id":55161233441111,"sku":"B0GJ12M3WL","price":101.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/gearwrench-tpms-front-view.jpg?v=1790322767"},{"product_id":"richeer-2-hubcentric-wheel-spacers-for-6x5-5-toyota-tacoma-4pc-106mm-bore-grade-12-9-studs","title":"Richeer 2\" Hubcentric Wheel Spacers for 6x5.5 Toyota\/Tacoma — 4pc 106mm Bore, Grade 12.9 Studs","description":"\u003cp\u003e\u003cstrong\u003eRicheer 2-inch hubcentric wheel spacers widen the track of 6x5.5 Toyota\/Tacoma-compatible vehicles, improving stance, traction, and handling while maintaining a hub-centered fit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese spacers are CNC-machined from forged 6061-T6 billet aluminum and use Grade 12.9 studs for high tensile strength, delivering a durable, precision fit for many Toyota models from 1995–2023 with a 6-lug pattern. The anodized finish guards against corrosion and the 106 mm center bore keeps wheels perfectly centered on the hub so you avoid vibration and premature wear. Designed as a 4-piece set at 2\" thickness, they’re intended for drivers who want a wider track, more aggressive wheel fitment, and improved on-road stability.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these spacers affect vehicle handling and stability?\u003c\/h3\u003e\n\u003cp\u003eAdding 2 inches per side increases track width, which often improves lateral stability and reduces body roll during turns. Properly installed, the spacers can give a more planted feel and allow for wider tires or different offset wheels without rubbing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2\" thickness pushes wheels outward for a wider footprint.\u003c\/li\u003e\n  \u003cli\u003eHubcentric design centers the wheel to reduce vibration.\u003c\/li\u003e\n  \u003cli\u003eGrade 12.9 studs provide superior clamping strength for safety.\u003c\/li\u003e\n  \u003cli\u003eCan improve stance and handling when paired with correct alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these spacers fit my vehicle and wheels?\u003c\/h3\u003e\n\u003cp\u003eThe set fits vehicles that use a 6x5.5\" (6x139.7 mm) wheel bolt pattern and a 106 mm center bore—commonly found on many Toyota models listed below. They are made for 6-lug Tacoma years 1995–2023 (and other compatible Toyota\/Lexus\/Toyota-based models), but they only fit 6-lug hubs; confirm your vehicle’s bolt pattern and hub bore before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt pattern: 6x5.5 (6x139.7 mm).\u003c\/li\u003e\n  \u003cli\u003eCenter bore: 106 mm (hubcentric fit).\u003c\/li\u003e\n  \u003cli\u003eStud thread: 12x1.5 with Grade 12.9 studs included.\u003c\/li\u003e\n  \u003cli\u003eFitment examples: 1995–2023 Tacoma (6-lug), 1989–2023 4Runner, 2000–2006 Tundra, others listed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and specifications ensure durability?\u003c\/h3\u003e\n\u003cp\u003eRicheer uses forged 6061-T6 billet aluminum for the spacer bodies combined with Grade 12.9 studs. CNC precision machining ensures consistent hubcentric tolerances and the anodized surface resists corrosion and environmental damage under road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: forged 6061-T6 billet aluminum.\u003c\/li\u003e\n  \u003cli\u003eStuds: Grade 12.9, tensile strength ≈1000 MPa.\u003c\/li\u003e\n  \u003cli\u003eFinish: anodized coating for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eSet: 4 pieces, 2\" thickness each; recommended torque 70–80 ft·lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should these spacers be installed and maintained?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires proper wheel hub cleaning, correct torque sequence, and retorqueing after initial use. Follow vehicle manufacturer guidelines for torque and recheck lug torque after 50–100 miles to ensure safe clamping and to avoid loosening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean hub mating surface before installation for accurate hubcentric fit.\u003c\/li\u003e\n  \u003cli\u003eTorque wheel nuts to 70–80 ft·lbs as recommended; follow a star pattern.\u003c\/li\u003e\n  \u003cli\u003eRecheck lug torque after initial 50–100 miles and periodically thereafter.\u003c\/li\u003e\n  \u003cli\u003eInspect studs and spacers for corrosion or damage during regular maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Richeer 2\" 6x5.5 hubcentric spacers suit Toyota and compatible owners who want a wider wheel stance, improved tire clearance for aftermarket wheels, or a more aggressive look without altering suspension geometry. They’re intended for mechanically capable DIYers and shop installers who will follow torque specs and fitment checks; confirm your vehicle’s bolt pattern and hub bore before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this spacer set fit my Tacoma?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits 1995–2023 Tacomas with a 6x5.5 (6x139.7 mm) bolt pattern and 106 mm hub bore; confirm your hub and lug pattern first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What torque should I use for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Torque wheel nuts to 70–80 ft·lbs and retorque after 50–100 miles to ensure proper clamping.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Richeer","offers":[{"title":"Default Title","offer_id":55161233473879,"sku":"B089VWYYR8","price":189.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/richeer-front-packaging-wheel-spacer-set.jpg?v=1790322773"},{"product_id":"avid-power-cordless-tire-inflator-20v-portable-air-compressor-auto-shut-off-led-light","title":"AVID POWER Cordless Tyre Inflator 20V Portable Air Compressor — Auto Shut-Off, LED Light","description":"\u003cstrong\u003eA compact, cordless 20V air compressor from AVID POWER that automatically stops at your set pressure for fast, hands-free tire inflation.\u003c\/strong\u003e\n\n\u003cp\u003eThis lightweight portable tire inflator combines a rechargeable 20V battery with a 12V car adapter, delivering quick inflation for cars, motorcycles, bikes and sports equipment. With an anti-glare digital display, built-in LED light and a rubberized handle, it’s designed for roadside convenience and household use. The unit achieves high airflow rates and accurate pressure readings, while included adapters make it ready for multiple inflation tasks right out of the box.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will this inflator fill a car tire?\u003c\/h3\u003e\n\u003cp\u003eThe AVID POWER 20V inflator pushes air at up to 30 liters per minute, enabling rapid top-ups and flat-to-target fills depending on tire size. Typical fill times are under 3 minutes for a common compact tire and under 5 minutes for mid-size passenger tires when going to 36 PSI.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e30 LPM maximum airflow for fast inflation.\u003c\/li\u003e\n  \u003cli\u003eAbout 3 minutes to fill a 195\/60 R14 tire to 36 PSI.\u003c\/li\u003e\n  \u003cli\u003eAbout 5 minutes to fill a 215\/60 R16 tire to 36 PSI.\u003c\/li\u003e\n  \u003cli\u003eAuto shut-off prevents overinflation when the preset pressure is reached.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat power options are available for roadside or home use?\u003c\/h3\u003e\n\u003cp\u003eThis compressor runs on a removable 20V lithium-ion battery for cordless freedom or via the included 12V DC car adapter for continuous operation. The long car adapter cord lets you work without draining the battery or when the battery is depleted.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e20V rechargeable battery for portable use.\u003c\/li\u003e\n  \u003cli\u003e12V DC adapter with roughly 9.8 ft cord for in-vehicle power.\u003c\/li\u003e\n  \u003cli\u003eBattery charger included so you can recharge at home.\u003c\/li\u003e\n  \u003cli\u003eSwap between battery and car power depending on the situation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow accurate and easy is it to use in low light or on the roadside?\u003c\/h3\u003e\n\u003cp\u003eThe inflator features a four-unit digital gauge with anti-glare visibility and ±2 PSI accuracy, making it straightforward to set and monitor pressure. An integrated LED lamp illuminates the work area, and the ergonomic rubberized handle improves grip for one-handed use or steady placement while inflating.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDigital readout supports PSI, BAR, KPA, KG\/CM units.\u003c\/li\u003e\n  \u003cli\u003eAnti-glare display and ±2 PSI accuracy for reliable measurements.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in LED light for night or low-light situations.\u003c\/li\u003e\n  \u003cli\u003eComfortable rubberized handle for secure handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat attachments and accessories are included for different inflation jobs?\u003c\/h3\u003e\n\u003cp\u003eThe package contains multiple nozzles to adapt the compressor to Schrader valves, Presta conversions for bikes, and inflatables like balls and toys. A compact tool bag keeps components organized and ready for storage in your trunk or garage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree nozzles including a bike valve adapter (Schrader to Presta).\u003c\/li\u003e\n  \u003cli\u003e20V battery pack, battery charger and 12V car power adapter.\u003c\/li\u003e\n  \u003cli\u003eUser manual and a storage tool bag for tidy transport.\u003c\/li\u003e\n  \u003cli\u003eNot intended for high-volume inflatables (air mattresses, large rafts) or heavy-duty truck tires.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The AVID POWER Cordless Tire Inflator is ideal for drivers who want a compact, fast and accurate solution for routine tire maintenance, cyclists and sports enthusiasts who need a reliable portable pump, and anyone who values a rechargeable option plus car-powered backup for roadside emergencies. It’s suited for passenger vehicles, motorcycles, bicycles and small inflatables, offering a practical balance of speed, accuracy and portability without the bulk of a larger compressor.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this device while plugged into my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The unit accepts the included 12V car adapter so you can power it directly from your vehicle’s outlet.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many tires can one battery charge inflate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A full 20V battery typically inflates about four compact 195\/60R14 tires or three 215\/60R16 tires to 36 PSI.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AVID POWER","offers":[{"title":"Default Title","offer_id":55161235702103,"sku":"B0CKTCBW5T","price":111.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/avid-power-front-overview.jpg?v=1790322834"},{"product_id":"ckauto-adhesive-stick-on-wheel-weights-1-2-oz-segments-gray-4-box-kit-504-lead-free-segments-four-season-tape","title":"CKAuto Adhesive Stick-On Wheel Weights 1\/2 oz Segments Grey — 4-Box Kit (504 Lead-Free Segments, Four-Season Tape)","description":"\u003cp\u003e\u003cstrong\u003eCKAuto 1\/2 oz adhesive stick-on wheel weights deliver 504 lead-free segments (252 oz total) in four boxed sets, engineered for accurate balancing and long-lasting adhesion.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese stick-on weights are pre-segmented 1\/2 oz pieces on U.S.-made four-season tape, electrogalvanized and multi-layer sprayed for corrosion resistance. Supplied as 4 boxes containing 18 strips each (7 segments per strip), the kit suits both professional shops and DIY enthusiasts who need a ready-to-use supply of gray adhesive wheel weights that meet universal safety standards.\u003c\/p\u003e\n\n\u003ch3\u003eHow are these wheel weights constructed and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eCKAuto combines precision-cut, lead-free alloy with a protective surface finish and a durable adhesive backing. That construction keeps each segment within close weight tolerances while resisting rust and environmental wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: lead-free alloy to meet universal regulations.\u003c\/li\u003e\n  \u003cli\u003eSurface finish: electrogalvanized plus multilayer plastic spray for corrosion protection.\u003c\/li\u003e\n  \u003cli\u003eTolerance: close manufacturing tolerances to ensure consistent balance per segment.\u003c\/li\u003e\n  \u003cli\u003ePre-segmentation: 7 segments per strip for easy sizing and application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the adhesive stay on in different climates and road conditions?\u003c\/h3\u003e\n\u003cp\u003eThe weights use U.S.-made four-season tape designed to hold at varied temperatures and resist moisture. Wide paper backing makes strips simple to peel and apply, and the adhesive is formulated for lasting adhesion on clean, dry wheel surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTape type: four-season adhesive for hot and cold environments.\u003c\/li\u003e\n  \u003cli\u003eBacking: wide paper backing helps controlled peeling and placement.\u003c\/li\u003e\n  \u003cli\u003eApplication tip: apply to a dry, grease-free surface for best bond.\u003c\/li\u003e\n  \u003cli\u003eDurability: designed to resist road spray and temperature cycling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow many weights come in this kit and how are they packaged?\u003c\/h3\u003e\n\u003cp\u003eThis kit contains four boxes totaling 72 strips and 504 individual 1\/2 oz segments, delivering 252 oz of balancing weight. Packaging is organized for easy inventory and immediate use in workshops or mobile service vans.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePer segment weight: 1\/2 oz each.\u003c\/li\u003e\n  \u003cli\u003ePer strip: 7 segments.\u003c\/li\u003e\n  \u003cli\u003ePer box: 18 strips (126 segments, 63 oz).\u003c\/li\u003e\n  \u003cli\u003eTotal: 4 boxes = 72 strips = 504 segments = 252 oz.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should a mechanic or DIYer apply and store these weights?\u003c\/h3\u003e\n\u003cp\u003ePrepare the wheel by cleaning and drying the mounting surface, then measure and place the required number of segments. Store unopened boxes in a cool, dry place to preserve adhesive performance and finish quality.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSurface prep: remove oil, brake dust, and road grime before application.\u003c\/li\u003e\n  \u003cli\u003ePlacement: press firmly for several seconds to bond the tape to the wheel.\u003c\/li\u003e\n  \u003cli\u003eStorage: keep in original boxes, away from direct sunlight and extreme heat.\u003c\/li\u003e\n  \u003cli\u003eHandling: separate segments from strips as needed—no cutting tools required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This CKAuto kit is suited for tire shops, mechanics, fleet operators, and car enthusiasts who need a high-volume supply of accurate, corrosion-resistant, lead-free adhesive weights. It’s ideal when multiple wheel balancing jobs require consistent segments, straightforward application, and dependable tape performance across seasons.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these wheel weights lead-free?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, CKAuto weights use lead-free material and are suitable for universal (50-state) use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many segments are included in the 4-box kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes 504 segments total: 4 boxes, 72 strips, 7 segments per strip (252 oz).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"CKAuto","offers":[{"title":"Default Title","offer_id":55161237045591,"sku":"B07J65CGDZ","price":143.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ckauto-front-packaging.jpg?v=1790322854"},{"product_id":"ksp-performance-2-wheel-spacers-8x6-5-for-ram-2500-3500-2in-forged-6061-t6-black-anodized-grade-10-9-bolts","title":"KSP PERFORMANCE 2\" Wheel Spacers 8x6.5 for Ram 2500\/3500 — 2in Forged 6061-T6 Black Anodized, Grade 10.9 Bolts","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE 2\" 8x6.5 wheel spacers are forged aluminum adapters that push your truck's wheels out two inches for improved fitment, clearance, and stance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese 2-inch, 8x165.1mm spacers are engineered for heavy-duty trucks and vans, offering a balance of lightweight strength and corrosion resistance. Machined from 6061-T6 aluminum, heat-treated hardware, and a black anodized finish, they are built to keep larger tires and aftermarket wheels centered and secure while reducing rubbing and improving track width. The kit includes two spacers and grade 10.9 bolts with thread locker to ensure reliable fastening.\u003c\/p\u003e\n\n\u003ch3\u003eWill these spacers fit my Ram 2500 or 3500?\u003c\/h3\u003e\n\u003cp\u003eYes — the KSP PERFORMANCE 2\" 8x6.5 spacers are designed for many Ram heavy-duty models and other HD trucks and vans. Verify your vehicle’s bolt pattern and hub bore before ordering to ensure proper fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt pattern: 8x6.5 (8x165.1 mm)\u003c\/li\u003e\n  \u003cli\u003eHub bore: 126.15 mm\u003c\/li\u003e\n  \u003cli\u003eThickness: 2\" (50.8 mm); quantity: 2 pieces\u003c\/li\u003e\n  \u003cli\u003eRecommended torque: 85–95 FT\/LBS\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these spacers improve wheel and tire clearance?\u003c\/h3\u003e\n\u003cp\u003eBy moving the wheel assembly outward two inches, these spacers create additional room between the wheel and suspension or brake components. That extra offset allows for larger diameter or wider tires and helps prevent caliper and inner fender contact without extensive modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2\" additional offset for more tire clearance\u003c\/li\u003e\n  \u003cli\u003eCorrects rubbing against calipers or shocks\u003c\/li\u003e\n  \u003cli\u003eEnables installation of wider or more aggressive tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these spacers durable and safe for heavy-duty use?\u003c\/h3\u003e\n\u003cp\u003eKSP PERFORMANCE manufactures these adapters from 6061-T6 aluminum, a popular billet-grade alloy for strength-to-weight performance. Bolts are heat treated to grade 10.9 and supplied with thread locker to reduce loosening and vibration risks when installed and torqued to spec.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061-T6 aluminum billet construction — lightweight and robust\u003c\/li\u003e\n  \u003cli\u003eBlack anodized surface for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003e10.9 grade heat-treated bolts included for secure fastening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles besides Ram are compatible with these spacers?\u003c\/h3\u003e\n\u003cp\u003eThese spacers are cross-compatible with a wide range of GM and Nissan heavy-duty trucks and vans that share the 8x6.5 bolt pattern and matching hub bore. Always cross-check year, make, and model against the listed fitment table prior to purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelected Chevy\/GMC pickups and vans (C\/K, Silverado, Sierra, Suburban, Yukon XL, Savana, Express)\u003c\/li\u003e\n  \u003cli\u003eNissan NV 1500\/2500\/3500 (2012–2014) compatibility where hub specs match\u003c\/li\u003e\n  \u003cli\u003eSee product listing for a full year\/make\/model compatibility list\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers upgrading tires or aftermarket wheels on heavy-duty trucks and vans who need two inches of added clearance or a wider track without cutting or extensive modification. This kit suits truck owners fitting larger tires, correcting brake caliper clearance, or seeking a more aggressive stance while retaining a durable, serviceable spacer solution. Before purchasing, confirm your vehicle matches the listed bolt pattern (8x6.5\/8x165.1mm) and hub bore (126.15mm), and follow the recommended torque (85–95 FT\/LBS) during installation. KSP PERFORMANCE supports the product with a 30-day refund and 12-month replacement policy and includes thread locker with the hardware for added peace of mind.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these spacers require hub-centric rings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: These spacers have a 126.15mm bore; if your aftermarket wheel bore differs, use hub-centric rings to ensure proper centering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these spacers myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If you have basic mechanical skills and a torque wrench, you can install them. Follow torque specs (85–95 FT\/LBS) and recheck after a short drive.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":55161310118231,"sku":"B0BYJ11NSL","price":153.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ksp-performance-front-face-spacer.jpg?v=1790324537"},{"product_id":"ksp-performance-1-5in-6x139-7-wheel-spacers-for-silverado-sierra-78-1mm-hubcentric-forged-6061-t6-aluminum","title":"KSP PERFORMANCE 1.5in 6x139.7 Wheel Spacers for Silverado\/Sierra — 78.1mm Hubcentric, Forged 6061-T6 Aluminium","description":"\u003cp\u003e\u003cstrong\u003eKSP 1.5-inch 6x139.7 hubcentric wheel spacers widen the track of Silverado\/Sierra and compatible GM trucks by 1.5 inches using forged 6061-T6 aluminum and OEM-grade hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese wheel spacers are designed to bolt directly to 6x139.7 bolt-pattern GM trucks and SUVs (including Silverado, Sierra, Tahoe, Yukon, Suburban, Escalade, Avalanche, Express, and Savana models listed by year) to create extra clearance for larger wheels, a wider stance, or improved wheel fitment without modifying the hub. Each kit includes four forged spacers with a 78.1mm hub bore, M14x1.5 stud threads, and premium fasteners, plus a recommended torque spec for safe installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these spacers affect fitment and clearance on my GMC\/Chevy truck?\u003c\/h3\u003e\n\u003cp\u003eAdding 1.5 inches per side pushes the wheel outward to provide extra clearance for wider tires, calipers, or aftermarket wheels that otherwise rub. Because these spacers are hub-centric with a 78.1mm bore, they center on the factory hub to reduce runout and vibration when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt pattern: 6x5.5 (6x139.7 mm) compatible with listed GM models.\u003c\/li\u003e\n  \u003cli\u003eThickness: 1.5 inches — increases track width accordingly.\u003c\/li\u003e\n  \u003cli\u003eHub bore: 78.1 mm to match factory hub centering.\u003c\/li\u003e\n  \u003cli\u003eThread pitch: M14 x 1.5 compatible with OEM lug stud sizes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and manufacturing steps ensure strength and reliability?\u003c\/h3\u003e\n\u003cp\u003eKSP spacers are forged from 6061-T6 aircraft-grade aluminum and CNC-machined to precise tolerances, which offers superior strength over common cast pieces while maintaining lighter weight than many steel alternatives. Fasteners use ISO\/DIN 10.9–12.9 grade studs and heat-treated SCM435 bolts to resist shearing and fatigue under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: 6061-T6 forged aluminum for high strength-to-weight ratio.\u003c\/li\u003e\n  \u003cli\u003eCNC machining: accurate hole locations and uniform thickness.\u003c\/li\u003e\n  \u003cli\u003eCorrosion protection: black anodized finish to resist oxidation.\u003c\/li\u003e\n  \u003cli\u003eHardware: geomet-coated, high-grade studs and heat-treated bolts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and torque these wheel spacers safely?\u003c\/h3\u003e\n\u003cp\u003eInstallation involves mounting the spacer to the hub with the supplied studs\/bolts, seating the spacer firmly, then mounting the wheel and torquing to the manufacturer-recommended spec. KSP advises a torque range to secure the parts and includes thread locker to help prevent loosening; verify wheel\/lug torque after the first 50–100 miles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended torque: 85–95 ft·lb for final wheel\/lug tightening.\u003c\/li\u003e\n  \u003cli\u003ePackage: four spacers per kit—one per wheel.\u003c\/li\u003e\n  \u003cli\u003eIncludes thread locker and adjusted stud length to aid installation.\u003c\/li\u003e\n  \u003cli\u003eTip: trim excessive stud length if it interferes with wheel fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these spacers affect handling or require other modifications?\u003c\/h3\u003e\n\u003cp\u003ePushing wheels outward changes scrub radius and track width, which can alter steering feel and load on suspension components. For a 1.5-inch spacer, most trucks in the listed range tolerate the change without additional modifications, but inspect suspension, bearings, and wheel bearings periodically and consult a professional for alignment after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrack increase: 1.5 inches per side — wider stance benefits stability in many use cases.\u003c\/li\u003e\n  \u003cli\u003eSuspension: monitor for extra load on wheel bearings and tie rods.\u003c\/li\u003e\n  \u003cli\u003eAlignment: recommended after installation to restore correct toe\/camber.\u003c\/li\u003e\n  \u003cli\u003eCompatibility check: verify stud thread pitch and hub bore match your vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own compatible Chevrolet or GMC trucks and SUVs and want a durable, precisely machined 1.5-inch wheel spacer to clear larger wheels or improve stance without hub modification. These spacers suit owners who prefer forged aluminum components, OEM-style hub-centric fitment, and hardened hardware for road and light off-road use, plus anyone seeking a reversible upgrade supported by a 30-day refund and 12-month replacement policy from KSP PERFORMANCE.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these spacers fit my 2015 Silverado 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 6x139.7 bolt pattern, 78.1mm hub bore, and M14x1.5 threads are compatible with 2015 Silverado 1500 models listed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these spacers include all required hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — each kit includes four forged spacers, geomet studs\/bolts, and thread locker; torque to 85–95 ft·lb after installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":55161310216535,"sku":"B0976SKXC5","price":192.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ksp-front-view-spacer-kit.jpg?v=1790324541"},{"product_id":"viair-portable-12v-air-compressor-88p-compact-120-psi-tire-inflator-with-carry-case-and-led-light","title":"VIAIR Portable 12V Air Compressor 88P — Compact 120 PSI Tyre Inflator with Carry Case and LED Light","description":"\u003cp\u003e\u003cstrong\u003eThe VIAIR 88P is a compact 12V portable air compressor kit that quickly inflates car and truck tires, delivers up to 120 PSI, and stores easily in its included carry case.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eLightweight and built for on-the-go use, the 88P brings dependable inflation power wherever you drive. At under 10 inches long and about 4.75 pounds, this pump is small enough for trunk storage yet powerful enough to top off passenger vehicle and light-truck tires. The unit connects directly to your vehicle battery via alligator clips, includes a pressure gauge, LED work light, and a set of inflation adapters so you can handle tires, sports gear, and inflatables with minimal fuss.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast and powerful is the 88P for everyday tires?\u003c\/h3\u003e\n\n\u003cp\u003eThe 88P is engineered to deliver practical, rapid inflation for most passenger tires and light truck tires up to 33 inches. It provides a maximum working pressure of 120 PSI and a free-flow rate suitable for fast top-ups; for example, typical 225\/60\/18 tires can be reached in roughly a minute.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaximum pressure: 120 PSI\u003c\/li\u003e\n  \u003cli\u003eFree-flow rate: 1.47 CFM\u003c\/li\u003e\n  \u003cli\u003eSuitable for tires up to 33 inches\u003c\/li\u003e\n  \u003cli\u003eExample: 225\/60\/18 tire filled in ~50 seconds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories are included and how do they make the pump more useful?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit arrives with a durable canvas carry case and a set of practical accessories to expand its usefulness beyond vehicle tires. You get a long air hose and power cord for reach, a brass twist-on chuck for reliable valve connection, inflation tips for balls and inflatables, and a Presta adapter for bicycles.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e16-foot air hose for extended reach\u003c\/li\u003e\n  \u003cli\u003e10-foot power cord with battery alligator clips\u003c\/li\u003e\n  \u003cli\u003eBuilt-in pressure gauge and LED work light\u003c\/li\u003e\n  \u003cli\u003eThree inflation tips and Presta valve adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do you operate the compressor safely and simply?\u003c\/h3\u003e\n\n\u003cp\u003eOperation is straightforward: attach the alligator clips to your battery, start the vehicle engine, attach the chuck to the valve stem, and flip the on\/off switch. Monitor the analog pressure gauge and stop when you reach your desired PSI; the gauge gives a quick visual reference so you avoid overinflation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect battery connection via alligator clips for full current\u003c\/li\u003e\n  \u003cli\u003eSimple on\/off switch, no programming needed\u003c\/li\u003e\n  \u003cli\u003eIntegrated LED light aids night-time use\u003c\/li\u003e\n  \u003cli\u003eMonitor the included gauge to reach target pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should you choose the 88P over cigarette-plug models?\u003c\/h3\u003e\n\n\u003cp\u003eThe 88P is the right choice when you want higher motor current and faster inflation than a cigarette-lighter model can provide. Because it draws more current, the unit uses battery clips rather than a lighter plug, giving stronger, more reliable power for larger tires or quicker fills.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBattery clips provide direct 12V power for higher draw\u003c\/li\u003e\n  \u003cli\u003eBetter for rapid fills and larger tire sizes\u003c\/li\u003e\n  \u003cli\u003eCigarette-plug models are lower-current alternatives for light use\u003c\/li\u003e\n  \u003cli\u003eChoose 88P for trail, overland, and emergency readiness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The VIAIR 88P suits commuters, families, and off-roaders who want a compact, dependable inflator stowed in a vehicle or tool kit. If you need occasional to frequent tire inflation, roadside emergency readiness, or a portable pump for trips and outdoor use, this kit balances portability, power, and useful accessories to keep you rolling without heavy bulk.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the 88P run from a cigarette lighter socket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The 88P requires direct battery connection via alligator clips because it draws higher current than cigarette-lighter outlets supply.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tire sizes can the 88P service?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 88P is rated for tires up to 33 inches and delivers up to 120 PSI, suitable for most cars, SUVs, and light trucks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VIAIR","offers":[{"title":"Default Title","offer_id":55161310740823,"sku":"B005ASY23I","price":134.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/viair-88p-front-view.jpg?v=1790324563"},{"product_id":"ksp-performance-6x5-5-wheel-spacers-for-silverado-sierra-1-5in-forged-black-78-1mm-hub-centric-set-of-4","title":"KSP PERFORMANCE 6x5.5 Wheel Spacers for Silverado \u0026 Sierra 1.5in Forged Black, 78.1mm Hub-Centric (Set of 4)","description":"\u003cstrong\u003eKSP PERFORMANCE 1.5\" (38mm) forged wheel spacers widen your Chevy\/GMC wheel stance safely for improved fitment and clearance while retaining factory hub centering.\u003c\/strong\u003e\n\n\u003cp\u003eThese KSP PERFORMANCE wheel spacers are real forged 6061-T6 aluminum designed to adapt 6x139.7 (6x5.5) bolt patterns to maintain proper hub-centric alignment for Silverado, Sierra, Tahoe, Yukon, Suburban and related trucks and vans. Finished with black anodizing and supplied with high-strength studs and bolts, the kit arrives as a set of four 38mm spacers with a 78.1mm hub bore and M14x1.5 threads. The parts are CNC-machined for precise hole location and come with thread locker applied to help secure fasteners during installation.\u003c\/p\u003e\n\n\u003ch3\u003eWill these spacers fit my Silverado or Sierra?\u003c\/h3\u003e\n\u003cp\u003eCompatibility covers many GM trucks and SUVs that use the 6x139.7 bolt pattern and a 78.1mm hub bore. Verify your vehicle’s bolt pattern, hub bore, and stud thread pitch before buying to ensure proper fit and safe operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt pattern: 6x5.5 (6x139.7mm)\u003c\/li\u003e\n  \u003cli\u003eHub bore: 78.1mm (3.07\")\u003c\/li\u003e\n  \u003cli\u003eThread pitch: M14x1.5\u003c\/li\u003e\n  \u003cli\u003ePackage: four 1.5\" (38mm) forged spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these spacers built and secured?\u003c\/h3\u003e\n\u003cp\u003eKSP uses forged 6061-T6 aircraft-grade aluminum for each spacer, then CNC machines bores and holes for accurate alignment. Studs are grade ISO\/DIN 10.9-12.9 and bolts are SCM435 heat-treated steel; thread locker is included to reduce fastener loosening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: 6061-T6 forged aluminum, black anodized for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eStuds\/bolts: heat-treated, high-grade steel for strength\u003c\/li\u003e\n  \u003cli\u003eFastening: pre-applied thread locker and recommended torque of 85–95 ft·lbs\u003c\/li\u003e\n  \u003cli\u003eQuality checks: multiple inspections to reduce cracking and breakage risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat clearance or fit improvements can I expect?\u003c\/h3\u003e\n\u003cp\u003eAdding 38mm of offset gives extra track width for wider tires, improved wheel tuck or better caliper clearance. The spacers help achieve a flatter wheel fitment and can prevent tire rubbing on suspension or bodywork when running aftermarket wheels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtra clearance for larger tires and wheels\u003c\/li\u003e\n  \u003cli\u003eBetter brake caliper clearance with certain aftermarket wheels\u003c\/li\u003e\n  \u003cli\u003eImproved stance and wheel offset correction\u003c\/li\u003e\n  \u003cli\u003eMaintains hub-centric seating to reduce vibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there installation tips or torque requirements?\u003c\/h3\u003e\n\u003cp\u003eThese spacers are sold as a universal fit for specified bolt patterns, but you should confirm stud length and any interference before final installation. If the supplied studs protrude too far, they can be trimmed to the correct length; always follow torque specifications and re-check fasteners after initial miles driven.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended torque: 85–95 ft·lbs\u003c\/li\u003e\n  \u003cli\u003eTrim excess stud length if necessary for proper wheel fit\u003c\/li\u003e\n  \u003cli\u003eRe-torque after first 50–100 miles and periodically thereafter\u003c\/li\u003e\n  \u003cli\u003eUse hub-centric fit to minimize vibration risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: KSP PERFORMANCE 1.5\" forged wheel spacers are aimed at Chevy and GMC owners—Silverado, Sierra, Tahoe, Yukon, Suburban, Avalanche, Express and Savana drivers—who need reliable, hub-centric spacers for wider tires, improved wheel clearance, or corrected offset. If you value forged construction, CNC precision, and high-quality studs and bolts, this kit provides a robust option. Confirm bolt pattern, hub bore and thread pitch before purchase, and follow recommended torque and installation guidance for safest results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these spacers fit a 2015 Chevy Silverado 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your 2015 Silverado has a 6x139.7 bolt pattern and 78.1mm hub bore with M14x1.5 studs, these 1.5\" spacers will fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What torque should I use when installing these spacers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Torque wheel fasteners to 85–95 ft·lbs and re-check torque after the first 50–100 miles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":55161310773591,"sku":"B083FD7NMY","price":208.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ksp-front-view-spacer-kit_5914663f-bfb7-4059-9fce-e69df3480431.jpg?v=1790324561"},{"product_id":"viair-evc88p-12v-digital-tire-inflator-120-psi-auto-shutoff-compact-kit-with-led-light","title":"VIAIR EVC88P 12V Digital Tyre Inflator — 120 PSI, Auto Shutoff, Compact Kit with LED Light","description":"\u003cp\u003e\u003cstrong\u003eThe VIAIR EVC88P is a compact 12V digital tire inflator that delivers up to 120 PSI, a preset pressure function with automatic shutoff, and a complete portable kit for cars, trucks, motorcycles, and off‑road vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eCompact and purpose-built, the EVC88P combines a clear digital gauge, preset controls, and a maintenance‑free gearless motor into a lightweight unit that stows easily in trunks, cargo boxes, and overland rigs. Designed to get you rolling quickly, it inflates typical car tires fast, includes a durable canvas carrying case, and brings practical accessories—LED work light, multiple inflation tips, and a Presta adapter—so you can handle tires, bikes, and inflatables without hunting for extra tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the preset pressure and auto shutoff work?\u003c\/h3\u003e\n\u003cp\u003eThe digital preset lets you choose your target PSI on the backlit display; once the compressor reaches that pressure, it stops automatically so you don’t overinflate. This removes guesswork during roadside stops and makes routine checks simple and repeatable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSet desired PSI on the digital interface before inflating.\u003c\/li\u003e\n  \u003cli\u003eAttach the brass twist‑on chuck to the valve for a secure seal.\u003c\/li\u003e\n  \u003cli\u003eAuto shutoff prevents overinflation once the preset is reached.\u003c\/li\u003e\n  \u003cli\u003eBacklit display helps with adjustments in low light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow fast and powerful is the EVC88P for everyday tires?\u003c\/h3\u003e\n\u003cp\u003eWith a 1.47 CFM free‑flow rating and a 120 PSI max, the EVC88P is sized to handle car and light truck tires efficiently; VIAIR cites inflation of a 225\/60\/18 tire in around 50 seconds. A 25‑minute duty cycle at 30 PSI balances performance and thermal protection for typical roadside use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.47 CFM flow rate for steady inflation of passenger tires.\u003c\/li\u003e\n  \u003cli\u003e120 PSI maximum output for versatility across tire types.\u003c\/li\u003e\n  \u003cli\u003eCapable for tires up to 33 inches in diameter (cars, SUVs, small trucks).\u003c\/li\u003e\n  \u003cli\u003e25‑minute duty cycle at 30 PSI to prevent overheating during repeated use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories and connections are included for convenience?\u003c\/h3\u003e\n\u003cp\u003eThe EVC88P ships as a ready‑to‑use kit with a long air hose, vehicle battery power cord with clamps, and multiple inflation tips so it serves tires, sports gear, and inflatables without extra purchases. A brass twist‑on chuck and Presta adapter improve reliability and compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e16‑foot air hose and 10‑foot power cord extend reach to all four tires.\u003c\/li\u003e\n  \u003cli\u003eSolid brass twist‑on chuck for a secure valve connection.\u003c\/li\u003e\n  \u003cli\u003eLED work light for night or low‑visibility repairs.\u003c\/li\u003e\n  \u003cli\u003eCanvas carrying case with handle keeps parts organized and portable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use it off‑road or on longer trips?\u003c\/h3\u003e\n\u003cp\u003eYes—the EVC88P is designed for overlanding, road trips, and trail use where 12V vehicle power is available. Its compact size, durable case, and included accessories make it a practical emergency and maintenance tool for remote travel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePortable size (9.8 x 3.2 x 5.6 inches) and 4.75 lb weight for easy storage.\u003c\/li\u003e\n  \u003cli\u003eConnects to vehicle battery via alligator clamps for reliable power.\u003c\/li\u003e\n  \u003cli\u003eLED light and long hose help with roadside or campsite repairs.\u003c\/li\u003e\n  \u003cli\u003eIncludes tips for bike tires and inflatables while supporting vehicle tires up to 33 inches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The VIAIR EVC88P suits drivers who want a dependable, compact inflator for routine pressure maintenance, emergency roadside repairs, and outdoor adventures. It’s a good fit for everyday passenger cars, SUVs, small trucks, motorcycles, and cyclists who prefer a single, durable kit with digital controls and auto shutoff instead of multiple pumps or bulky compressors.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the EVC88P plug into a cigarette lighter or battery?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It connects to a 12V vehicle battery using included alligator clamps; start the engine while inflating for stable power.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it inflate bicycle tires with Presta valves?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—an included Presta adapter and multiple tips allow inflation of bike tires and a variety of inflatables.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VIAIR","offers":[{"title":"Default Title","offer_id":55161310871895,"sku":"B0D92XCJC2","price":167.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/viair-evc88p-front-profile.jpg?v=1790324565"},{"product_id":"ksp-performance-6x5-5-wheel-spacers-2-for-silverado-sierra-ram-1500-forged-6061-t6-black-anodized-set-of-4","title":"KSP PERFORMANCE 6x5.5 Wheel Spacers 2\" for Silverado, Sierra \u0026 Ram 1500 — Forged 6061-T6, Black Anodized Set of 4","description":"\u003cstrong\u003eKSP PERFORMANCE 2\" 6x5.5 wheel spacers adapt 6x139.7mm wheels to your Chevy Silverado, Sierra, Yukon and compatible Ram 1500 while adding a wider track and improved clearance.\u003c\/strong\u003e\n\n\u003cp\u003eThese 2-inch wheel spacers from KSP PERFORMANCE are precision-machined adapters that shift each wheel outward for better stance, clearance and fitment of larger tires. Engineered from forged 6061-T6 aluminum and finished with black anodizing, the set includes hardened 10.9 grade geomet bolts with thread locker for secure installation. Designed for a wide range of GM trucks, SUVs and the 2019-2026 Ram 1500, the spacers match a 6x5.5\" (6x139.7mm) bolt pattern with a 108mm hub bore.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these spacers affect wheel fitment and tire clearance?\u003c\/h3\u003e\n\u003cp\u003eInstalling KSP's 2\" spacers moves the wheel centerline outward two inches, creating extra room between the wheel and brake components or suspension arms. This is a straightforward solution when swapping to wheels or tires that otherwise rub or fail to clear OEM calipers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThickness: 2\" (50mm) added per wheel\u003c\/li\u003e\n  \u003cli\u003eBolt pattern: 6x5.5\" (6x139.7mm)\u003c\/li\u003e\n  \u003cli\u003eHub bore: 108mm for proper centering\u003c\/li\u003e\n  \u003cli\u003eThread pitch: 14mm x 1.5, torque spec 85–95 ft·lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these spacers strong and safe for everyday driving?\u003c\/h3\u003e\n\u003cp\u003eYes — KSP machines these adapters from forged 6061-T6 aluminum, which offers higher fatigue resistance than cast alternatives. Bolts are heat-treated to 10.9 strength and pass SGS testing; black anodizing helps guard against corrosion for long-term durability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: forged 6061-T6 aluminum billet construction\u003c\/li\u003e\n  \u003cli\u003eHardware: heat-treated 10.9 grade geomet bolts included\u003c\/li\u003e\n  \u003cli\u003eFinish: corrosion-resistant black anodized surface\u003c\/li\u003e\n  \u003cli\u003eIncluded thread locker to prevent loosening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles will these spacers fit and what should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eThese spacers are built to work with many GM trucks and SUVs plus the 2019–2026 Ram 1500. Always verify year, make and model fitment and confirm your wheel’s bolt pattern and hub bore before ordering to ensure proper fitment and centering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible vehicles include Silverado, Sierra, Yukon, Escalade, Tahoe, Suburban, Avalanche, Express, Savana\u003c\/li\u003e\n  \u003cli\u003eCommon years covered: broadly 1988–2026 across various GM models and 2019–2026 Ram 1500\u003c\/li\u003e\n  \u003cli\u003eQuantity: set of 4 spacers (one per wheel) supplied\u003c\/li\u003e\n  \u003cli\u003eRecommended torque range: 85–95 FT\/LBS for mounting bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill adding these spacers change how my truck handles?\u003c\/h3\u003e\n\u003cp\u003eWidening the track by two inches typically increases lateral stability and gives a more aggressive stance, but it also slightly changes scrub radius and load on wheel bearings. Proper installation, correct torqueing and routine inspections help maintain predictable handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproves cornering stability with wider track width\u003c\/li\u003e\n  \u003cli\u003eCan allow larger tire installations without rubbing\u003c\/li\u003e\n  \u003cli\u003eMay alter steering feel; check alignment after installation\u003c\/li\u003e\n  \u003cli\u003ePeriodic hardware checks recommended for safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: KSP PERFORMANCE 6x5.5\" 2\" wheel spacers are intended for truck and SUV owners upgrading wheel\/tire size, addressing brake or suspension clearance, or seeking a wider stance on compatible Chevrolet\/GMC models and recent Ram 1500s. They suit DIY installers and professional shops who require forged aluminum strength, hardened hardware, and clear specifications for safe fitting. Before buying, confirm your vehicle’s bolt pattern, hub bore and fitment years to ensure these spacers match your application.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these spacers come with the bolts needed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the set includes heat-treated 10.9 grade geomet bolts and thread locker for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need an alignment after installing 2\" spacers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: An alignment is recommended after installation to account for the changed track width and steering geometry.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":55161310839127,"sku":"B0B59BZJC1","price":206.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ksp-performance-wheel-spacer-front-packaging.jpg?v=1790324561"},{"product_id":"viair-88p-off-road-portable-air-compressor-for-utvs-33-tire-capacity-120-psi-hard-mountable","title":"VIAIR 88P Off‑Road Portable Air Compressor for UTVs — 33\" Tyre Capacity, 120 PSI, Hard‑Mountable","description":"\u003cp\u003e\u003cstrong\u003eThe VIAIR 88P Off-Road Portable Air Compressor is a compact, hard-mountable inflator that powers up to 33\" tires and reaches 120 PSI for UTVs, SxS and light off-road vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe 88P Side-by-Side Edition from VIAIR is designed for riders and owners who want a purpose-built inflator for Polaris Ranger, CanAm Maverick and similar UTVs. It arrives with a permanent 2-pin SAE connector and a quick-use SAE-to-battery clamp so you can hook the unit to your vehicle electrical system without fuss. A top-mounted pressure gauge and a rugged carry bag that mounts securely to your roll cage or cargo area make the 88P ideal for on-trail tire adjustments and emergency reinflation.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast can the VIAIR 88P inflate off-road tires?\u003c\/h3\u003e\n\u003cp\u003eThis compressor is optimized to refill up to 33-inch tires quickly — typically in three minutes or less depending on tire volume and starting pressure. It delivers efficient airflow at a maximum working pressure of 120 PSI and is built for short, intense use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInflates up to 33\" tires in about 3 minutes or less\u003c\/li\u003e\n  \u003cli\u003e120 PSI maximum working pressure for high-pressure needs\u003c\/li\u003e\n  \u003cli\u003e25-minute duty cycle to prevent overheating during repeated use\u003c\/li\u003e\n  \u003cli\u003eTop-mounted pressure gauge for fast pressure checks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical connections and accessories are included?\u003c\/h3\u003e\n\u003cp\u003eThe 88P includes a permanent 2-pin SAE connector pre-installed, plus a 2-pin SAE-to-battery clamp for temporary battery connection. These options let you hard-mount the unit or connect it quickly when needed without rewiring your vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePermanent 2-pin SAE connector for dedicated installation\u003c\/li\u003e\n  \u003cli\u003e2-pin SAE to battery clamp for portable battery hookup\u003c\/li\u003e\n  \u003cli\u003eSimple valve-stem coupling — connect and switch on\u003c\/li\u003e\n  \u003cli\u003eIntegrated gauge on the unit for immediate pressure feedback\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I mount the compressor to my UTV and what does the bag do?\u003c\/h3\u003e\n\u003cp\u003eThe 88P ships with a reinforced carry bag engineered for hard mounting to a side-by-side frame or cargo area. The bag protects the compressor from debris and keeps the unit secured during aggressive off-road riding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHard-mountable carry bag included for secure storage\u003c\/li\u003e\n  \u003cli\u003eProtects the unit from dust, mud and impact while trail riding\u003c\/li\u003e\n  \u003cli\u003eCompact footprint fits common UTV mounting locations\u003c\/li\u003e\n  \u003cli\u003eFast access to hose and gauge when you need to adjust tire pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the VIAIR 88P suitable for continuous or heavy-duty use?\u003c\/h3\u003e\n\u003cp\u003eThe 88P is intended for intermittent off-road use rather than continuous industrial duty. With a 25-minute duty cycle it handles multiple tire inflations and spot repairs in a single outing but should be allowed to cool between extended cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e25-minute duty cycle recommended to avoid overheating\u003c\/li\u003e\n  \u003cli\u003eDesigned for on-trail tire maintenance and emergencies\u003c\/li\u003e\n  \u003cli\u003eNot intended for continuous commercial inflation applications\u003c\/li\u003e\n  \u003cli\u003eRobust components for repetitive off-road demands when used correctly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The VIAIR 88P is aimed at UTV and SxS owners—especially Polaris Ranger and CanAm Maverick riders—who need a reliable, vehicle-ready inflator for on-trail tire tuning, quick repairs and regular off-road use. It suits DIY enthusiasts and weekend riders who want a compact, mountable unit with a professional connector setup, built-in gauge, and enough pressure capacity for larger UTV tires.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the 88P inflate 33\" tires?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 88P is rated to inflate up to 33-inch tires and can reach a maximum working pressure of 120 PSI.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I connect the compressor to my UTV?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use the included permanent 2-pin SAE connector for hard mounting or the SAE-to-battery clamp for temporary battery hookup.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VIAIR","offers":[{"title":"Default Title","offer_id":55161311035735,"sku":"B09Z1W4DHS","price":179.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/viair-88p-front-unit-and-gauge.jpg?v=1790324559"},{"product_id":"milwaukee-m18-inflator-2848-20-cordless-tire-inflator-compact-high-flow-with-digital-psi-gauge","title":"Milwaukee M18 Inflator 2848-20 Cordless Tyre Inflator — Compact, High-Flow with Digital PSI Gauge","description":"\u003cp\u003e\u003cstrong\u003eMilwaukee M18 Inflator 2848-20 is a compact, battery-powered tire inflator that delivers fast, accurate inflation for passenger, light truck, and other medium-duty tires.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe M18 Inflator 2848-20 combines cordless portability with a high-flow motor and precise pressure control so you can top off tires quickly without needing mains power. Its design is tuned for everyday vehicle use — passenger cars, SUVs, and light trucks — and includes multiple chuck types for sports equipment and inflatables, making it a versatile tool for home garages, roadside kits, and workshop benches.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast and precise is this inflator for everyday tires?\u003c\/h3\u003e\n\u003cp\u003eThe M18 Inflator is built to deliver rapid inflation while maintaining accurate pressure readings. It claims the ability to top off a 33\" light truck tire in under one minute when paired with the appropriate M18 battery and under ideal conditions, and it features a digital gauge for setting exact pressures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-flow motor designed for quick airflow and short fill times\u003c\/li\u003e\n  \u003cli\u003eDigital pressure display for precise PSI control\u003c\/li\u003e\n  \u003cli\u003eOptimized performance specifically for passenger and light truck tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories and valve options come with the 2848-20?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a set of common inflation accessories so you can use the tool on a broad range of valves and inflatables right out of the box. Each accessory is built to work with the metal Schrader chuck and the inflator's hose assembly for reliable seals and fast switching between tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAll-brass Schrader chuck for durable, leak-resistant tire connections\u003c\/li\u003e\n  \u003cli\u003eInflation needle and nozzle for sports balls and pool toys\u003c\/li\u003e\n  \u003cli\u003ePresta chuck for bicycle tires and other narrow-valve applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow portable and durable is the M18 Inflator for roadside and shop use?\u003c\/h3\u003e\n\u003cp\u003eAs an 18V cordless unit, the inflator offers real portability—no cord or compressor needed—so you can move it between vehicles or keep it in a trunk for emergencies. The chassis is engineered for handheld use and frequent transport, with components like the brass chuck chosen for longevity under repeated connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCordless design runs on Milwaukee M18 batteries for true on-the-go inflation\u003c\/li\u003e\n  \u003cli\u003eCompact form factor fits in trunks, toolboxes, or shop shelves\u003c\/li\u003e\n  \u003cli\u003eSturdy materials (brass chuck, reinforced hose) for repeated professional use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the digital controls to set and stop at the right pressure?\u003c\/h3\u003e\n\u003cp\u003eThe digital interface lets you enter a target PSI and the inflator stops automatically when that pressure is reached, simplifying one-person inflation tasks. The display and controls are straightforward, enabling quick checks and adjustments while you inflate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDigital readout shows current and target pressures for easy monitoring\u003c\/li\u003e\n  \u003cli\u003eAutomatic shutoff when preset pressure is achieved to avoid overinflation\u003c\/li\u003e\n  \u003cli\u003eManual override available for custom or non-standard inflation needs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Milwaukee M18 Inflator 2848-20 is aimed at motorists, fleet technicians, and DIYers who need a fast, accurate cordless inflator for passenger vehicles, SUVs, and light trucks. It also suits cyclists and sports enthusiasts because of the included Presta chuck and inflation needle, making it a practical multi-use tool for roadside assistance, home garages, and mobile service professionals.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the M18 Inflator 2848-20 run on any Milwaukee battery?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It runs on Milwaukee M18 batteries; performance and fill time depend on battery capacity (higher Ah gives longer run time and faster fills).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the inflator automatically shut off at the set pressure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The digital control lets you set a target PSI and the unit will stop inflating when that pressure is reached.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Milwaukee","offers":[{"title":"Default Title","offer_id":55161311789399,"sku":"B0B1VHG484","price":256.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/milwaukee-m18-inflator-front-view.jpg?v=1790324586"},{"product_id":"aplus-pro-racing-245-35zr20-95w-xl-racing-tire-semi-slick-directional-tread-heat-resistant-compound","title":"Aplus Pro Racing 245\/35ZR20 95W XL Racing Tyre — Semi-Slick Directional Tread, Heat-Resistant Compound","description":"\u003cstrong\u003eThe Aplus Pro Racing 245\/35ZR20 95W XL is a purpose-built high-performance racing tire engineered for maximum dry grip, precise steering and sustained high-speed stability.\u003c\/strong\u003e\n\n\u003cp\u003eDesigned for sports cars and track-focused drivers, the Aplus Pro Racing blends a semi-slick directional tread and heat-resistant compound with reinforced internal structure to deliver confident handling at speed. This tire’s construction prioritizes cornering rigidity and repeated high-load durability so drivers can push harder without sacrificing predictable feedback.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Aplus Pro Racing improve cornering and steering precision?\u003c\/h3\u003e\n\u003cp\u003eThe tire uses wide shoulder blocks and a reinforced belt package to maintain tread contact under lateral load, translating steering input into immediate response. Drivers experience less tread deformation during aggressive maneuvers, so turn-in feels sharper and more controlled.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWide shoulder blocks for improved lateral stiffness\u003c\/li\u003e\n  \u003cli\u003eReinforcement belts to reduce tread flex at high G-forces\u003c\/li\u003e\n  \u003cli\u003eDirectional pattern for consistent contact patch through corners\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this tire suitable for high-speed or track conditions?\u003c\/h3\u003e\n\u003cp\u003eAplus formulated a heat-resistant racing compound that resists overheating and preserves grip under repeated high-speed runs. The semi-slick tread pattern reduces heat buildup and offers a stable footprint, helping maintain performance consistency lap after lap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-grip, heat-resistant compound for thermal stability\u003c\/li\u003e\n  \u003cli\u003eSemi-slick directional tread to minimize rolling heat\u003c\/li\u003e\n  \u003cli\u003eXL (extra load) rating for added structural support at speed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the Aplus Pro Racing under racing stresses?\u003c\/h3\u003e\n\u003cp\u003eRobust reinforcement belts and optimized carcass construction increase structural integrity, so the tire resists blowouts and excessive wear when subjected to heavy loads and repeated high-speed runs. While built for performance rather than long touring life, its durability is tuned for demanding track and spirited road use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced belts maximize high-speed durability\u003c\/li\u003e\n  \u003cli\u003eOptimized design reduces irregular wear under stress\u003c\/li\u003e\n  \u003cli\u003eXL load index provides extra strength for heavier vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the tread design affect everyday usability?\u003c\/h3\u003e\n\u003cp\u003eThe semi-slick, directional pattern prioritizes dry traction and stability; it’s optimized for occasional road use and frequent track sessions. Expect excellent dry performance and steering feedback, though wet traction is secondary to the tire’s racing-oriented focus.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirectional grooves help water evacuation for limited wet performance\u003c\/li\u003e\n  \u003cli\u003eSemi-slick surface maximizes dry contact and braking grip\u003c\/li\u003e\n  \u003cli\u003eTread design favors responsive steering over extended touring comfort\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Aplus Pro Racing 245\/35ZR20 95W XL is aimed at drivers of high-performance coupes and sport sedans who demand aggressive dry grip, quick steering response and reinforced construction for track days or spirited driving. If you prioritize lap-time consistency and high-speed stability over touring mileage and all-weather versatility, this tire is engineered to meet those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Aplus Pro Racing tire suitable for daily driving?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s optimized for track and spirited driving; acceptable for occasional road use but not designed for long touring comfort or heavy wet-weather use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What does 95W XL mean for this tire?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: 95W indicates load capacity and speed rating; XL means extra load construction for greater strength at higher inflation pressures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Aplus","offers":[{"title":"Default Title","offer_id":55161313788247,"sku":"B0FN83Q9YL","price":172.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/aplus-pro-racing-front-profile.jpg?v=1790324608"},{"product_id":"aplus-pro-racing-235-40zr19-high-performance-xl-semi-slick-tire-for-dry-grip-and-track-stability","title":"Aplus Pro Racing 235\/40ZR19 High-Performance XL Semi-Slick Tyre for Dry Grip and Track Stability","description":"\u003cp\u003e\u003cstrong\u003eThe Aplus Pro Racing 235\/40ZR19 96W XL is a semi-slick, directional high-performance tire engineered for maximum dry grip, precise steering response, and high-speed stability on sports and race-oriented vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for drivers who prioritize traction and control, the Aplus Pro Racing blends a heat-resistant racing compound with reinforced construction to withstand aggressive cornering and sustained high speeds. Its directional tread and wide shoulder blocks focus contact and rigidity where it matters most, while reinforcement belts help the tire maintain structural integrity during demanding track or spirited road use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tire improve cornering and steering precision?\u003c\/h3\u003e\n\u003cp\u003eThe Aplus Pro Racing is designed to deliver immediate steering response and predictable behavior under lateral loads. Wide shoulder blocks and a stiffer tread crown keep the contact patch stable through turns, reducing flex and improving feedback to the driver.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWide shoulder blocks for increased rigidity and cornering control\u003c\/li\u003e\n  \u003cli\u003eOptimized tread geometry for precise steering inputs\u003c\/li\u003e\n  \u003cli\u003eReinforced belts to minimize deformation under lateral stress\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kind of performance can I expect at high speeds?\u003c\/h3\u003e\n\u003cp\u003eThis tire is built to maintain stability and consistent performance at elevated speeds without sacrificing grip. A heat-resistant compound and robust internal construction help the tire resist overheating and preserve handling characteristics during prolonged high-speed runs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-grip, heat-resistant compound for consistent traction\u003c\/li\u003e\n  \u003cli\u003eStructural reinforcement for high-speed durability\u003c\/li\u003e\n  \u003cli\u003eDirectional semi-slick tread for reduced rolling disturbance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the Aplus Pro Racing suitable for track days or weekend performance driving?\u003c\/h3\u003e\n\u003cp\u003eYes — the Aplus Pro Racing is intended for track-focused and performance driving environments where dry grip and steering accuracy are priorities. While optimized for dry conditions, its construction supports repeated high-load cycles common in track use; however, it is not designed as an all-season touring tire.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSemi-slick directional pattern ideal for dry track sessions\u003c\/li\u003e\n  \u003cli\u003eDurable compound and belts for repeated high-load use\u003c\/li\u003e\n  \u003cli\u003eQuick steering response for aggressive driving and lap consistency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do I need to know about size and load rating?\u003c\/h3\u003e\n\u003cp\u003eThe listed size 235\/40ZR19 indicates a 19-inch rim fitment with a 235 mm tread width and a 40% aspect ratio. The 96W XL rating denotes a 710 kg load index per tire and a W speed rating for high-speed capability, plus XL extra-load construction for reinforced capacity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e235\/40ZR19 fits 19-inch wheels and low-profile setups\u003c\/li\u003e\n  \u003cli\u003e96 load index equals 710 kg capacity per tire\u003c\/li\u003e\n  \u003cli\u003eW speed rating supports sustained high-speed operation; XL indicates extra-load strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Aplus Pro Racing 235\/40ZR19 96W XL is aimed at drivers of sport coupes and performance sedans who demand sharp handling, strong dry traction, and structural durability for spirited road driving or occasional track days. Choose this tire if you prioritize steering precision and high-speed stability over all-weather versatility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these tires for daily driving?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they can be used daily, but they are optimized for dry, performance driving and may wear faster than touring tires.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these tires support track use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the compound and reinforced construction are suitable for occasional track days and spirited driving.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Aplus","offers":[{"title":"Default Title","offer_id":55161314017623,"sku":"B0FN83LLPS","price":176.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/aplus-pro-racing-front-tread.jpg?v=1790324611"},{"product_id":"avid-power-cordless-tire-inflator-20v-portable-air-compressor-30-lpm-auto-shut-off-digital-gauge","title":"AVID POWER Cordless Tyre Inflator 20V Portable Air Compressor — 30 LPM, Auto Shut-Off, Digital Gauge","description":"\u003cp\u003e\u003cstrong\u003eThe AVID POWER Cordless Tire Inflator is a 20V portable air compressor with auto shut-off that quickly inflates car, motorcycle, bike, and sports tires while offering battery or 12V car-power flexibility.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eCompact and engineered for roadside readiness, this cordless inflator combines a high 30 LPM airflow with an easy-to-read digital gauge and an LED light so you can top up tires fast and accurately. It ships with a rechargeable 20V lithium battery plus a 12V car adapter, three nozzle fittings, and a carry bag so you can keep it in your trunk for emergencies or routine maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast and accurate is this inflator?\u003c\/h3\u003e\n\u003cp\u003eThe AVID POWER unit delivers up to 30 liters per minute, letting common passenger tires reach driving pressure in just a few minutes. Its digital display supports PSI, BAR, KPA and KG\/CM with about ±2 PSI accuracy, and the auto shut-off stops inflation at your preset pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInflates a 195\/60 R14 tire to 36 PSI in under 3 minutes\u003c\/li\u003e\n  \u003cli\u003eInflates a 215\/60 R16 tire to 36 PSI in under 5 minutes\u003c\/li\u003e\n  \u003cli\u003eDigital readout with four units and +\/-2 PSI accuracy\u003c\/li\u003e\n  \u003cli\u003eAuto shut-off prevents overinflation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat power options and runtime does it offer?\u003c\/h3\u003e\n\u003cp\u003eUse the built-in 20V rechargeable Li-ion battery for fully cordless operation, or plug the inflator into your vehicle’s 12V outlet with the included 9.8-foot cord when the battery is low. A full battery typically inflates about four 195\/60 R14 tires or three 215\/60 R16 tires from flat to 36 PSI.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e20V rechargeable lithium-ion battery included\u003c\/li\u003e\n  \u003cli\u003e12V car power adapter with long cord for continuous use\u003c\/li\u003e\n  \u003cli\u003eEstimated 3–4 full car tire inflations per full charge\u003c\/li\u003e\n  \u003cli\u003eRecommended cool-down after 10–15 minutes continuous use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich items can I inflate with this compressor?\u003c\/h3\u003e\n\u003cp\u003eThis handheld pump is built for low- to medium-volume inflatables: passenger car tires, motorcycle tires, bicycles, and various sports balls and small inflatables. It is not designed for large high-volume items like air mattresses, paddleboards, or heavy-duty truck tires.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: cars, motorcycles, bicycles, basketballs, soccer balls, pool floats\u003c\/li\u003e\n  \u003cli\u003eIncludes bike valve adapter for Schrader-to-Presta conversions\u003c\/li\u003e\n  \u003cli\u003eNot recommended for high-volume rafts, air beds, or heavy truck tires\u003c\/li\u003e\n  \u003cli\u003eThree nozzle fittings for broad accessory coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to use and store in daily life?\u003c\/h3\u003e\n\u003cp\u003eThe inflator’s ergonomic, rubberized handle and anti-glare LCD make setup and monitoring straightforward, even at night thanks to the built-in LED light. The kit’s compact tool bag stores the battery, charger, adapter and nozzles neatly for trunk or garage use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAnti-glare display for clear readings in sunlight\u003c\/li\u003e\n  \u003cli\u003eLED lamp activates during inflation for low-light visibility\u003c\/li\u003e\n  \u003cli\u003eRubberized grip for comfortable handling and stability\u003c\/li\u003e\n  \u003cli\u003eIncluded tool bag keeps all components organized\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: drivers who want a fast, portable solution for routine tire maintenance and roadside top-ups, cyclists and motorcyclists who need a compact inflator for trips, and households that want an all-purpose pump for balls and small inflatables. If you require inflation for very large-volume items or heavy-duty vehicle tires, consider a dedicated high-capacity compressor instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the inflator while plugged into my car if the battery dies?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the included 12V car adapter with a 9.8 ft cord lets you operate the inflator directly from your vehicle’s outlet.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many tires will one battery charge handle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A full 20V battery typically inflates about four 195\/60R14 tires or three 215\/60R16 tires from flat to 36 PSI.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AVID POWER","offers":[{"title":"Default Title","offer_id":55161315295575,"sku":"B08N459G4K","price":106.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/avid-power-front-view-inflator.jpg?v=1790324656"},{"product_id":"nuanjuyu-trailer-wheel-studs-and-nuts-1-2-20-unf-6-set-0-617-spline-2-2-length-for-3500-4400-lb-axles","title":"NUANJUYU Trailer Wheel Studs and Nuts 1\/2\"-20 UNF 6-Set — 0.617\" Spline, 2.2\" Length for 3500–4400 lb Axles","description":"\u003cp\u003e\u003cstrong\u003eNUANJUYU 6-set trailer wheel studs and matching nuts are heavy-duty replacement fasteners sized 1\/2\"-20 with 0.617\" spline, 0.77\" head and 2.2\" length, made to secure wheels on 3500–4400 lb Lippert and Dexter axles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese studs and nuts are engineered as direct-fit service parts for light- to medium-duty trailers: they restore proper wheel mounting and clamping when OE studs become worn, bent or corroded. Each kit includes six matched studs and six tapered nuts sized to industry UNF dimensions so you can replace a full wheel set quickly and with parts that meet the common specifications used on many 3,500–4,400 lb trailer axles.\u003c\/p\u003e\n\n\u003ch3\u003eWill these studs fit my trailer axle and wheels?\u003c\/h3\u003e\n\u003cp\u003eThese studs use a 1\/2\"-20 UNF thread pitch and a 0.617\" spline, which matches many Lippert 3500 lb and Dexter 4400 lb axle applications. Check your existing stud dimensions (thread size, spline diameter, head size and overall length) before ordering to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: 1\/2\"-20 UNF (20 TPI)\u003c\/li\u003e\n  \u003cli\u003eSpline diameter: 0.617\" for secure hub insertion\u003c\/li\u003e\n  \u003cli\u003eHead diameter: 0.77\" to fit common wheel bore and lug wrench sockets\u003c\/li\u003e\n  \u003cli\u003eOverall length: 2.2\" measured from underhead to tip\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install these studs and nuts safely?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires removing the wheel and hub to access the old studs; new studs press or drive into the hub spline and the tapered nuts seat into the wheel’s lug holes. Use proper torque values for your wheel nuts and re-check torque after initial road use for safe, even clamping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove wheel and hub\/drum per manufacturer instructions\u003c\/li\u003e\n  \u003cli\u003ePress or drive old studs out and install new 0.617\" spline studs until fully seated\u003c\/li\u003e\n  \u003cli\u003eTighten nuts to recommended torque for axle\/wheel type, then re-torque after 50–100 miles\u003c\/li\u003e\n  \u003cli\u003eInspect wheel runout and nut seating for even contact\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the nuts’ specifications and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eThe included nuts are 1\/2\"-20 UNF with 20 threads per inch, 0.63\" (16mm) length and a 60° tapered seating angle with a 13\/16\" hex. Proper nut shape and thread match ensure consistent clamping force and correct seating in the wheel counterbore.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread match prevents cross-threading and ensures torque accuracy\u003c\/li\u003e\n  \u003cli\u003eTapered 60° seat aligns with common wheel lug holes for secure fit\u003c\/li\u003e\n  \u003cli\u003e13\/16\" hex allows use with standard lug sockets and torque wrenches\u003c\/li\u003e\n  \u003cli\u003e0.63\" nut length for proper thread engagement without overhang\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these studs and how should I maintain them?\u003c\/h3\u003e\n\u003cp\u003eNUANJUYU studs and nuts are built for durability under trailer duty cycles—resisting wear from repeated wheel changes and highway use. Regular inspection, proper lubrication of mating surfaces, and correct torqueing are the best ways to extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for trailer axle working ranges of 3,500–4,400 lb\u003c\/li\u003e\n  \u003cli\u003eInspect threads and splines for wear or corrosion at each service interval\u003c\/li\u003e\n  \u003cli\u003eApply anti-seize or light oil to splines to ease future removal\u003c\/li\u003e\n  \u003cli\u003eRe-torque lug nuts after initial driving to maintain clamping\n  force\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 6-piece kit is ideal for trailer owners, fleet mechanics and DIYers who need a matched set of wheel studs and nuts for light- to medium-duty trailers using Lippert or Dexter style axles in the 3,500–4,400 lb range. It’s intended as a direct replacement for worn or damaged hardware and for users who want quality-spec fasteners sized to common trailer wheel dimensions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these studs compatible with Lippert 3500 lb axles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they match common Lippert 3500 lb axle specs: 1\/2\"-20 UNF thread, 0.617\" spline and 2.2\" length; verify existing stud dimensions first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these nuts with aftermarket wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if the wheel uses a 60° tapered lug seat and accepts 1\/2\"-20 threads; confirm wheel seat angle and bore size before installing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"NUANJUYU","offers":[{"title":"Default Title","offer_id":55161556402519,"sku":"B0G617VX41","price":30.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/nuanju_yu-studs-nuts-front-view.jpg?v=1790329402"},{"product_id":"vxdas-el-50448-tpms-reset-tool-for-gm-vehicles-2006-2026-orange-compact-relearn-tool-diy-portable","title":"VXDAS EL-50448 TPMS Reset Tool for GM Vehicles (2006–2026) — Orange Compact Relearn Tool, DIY Portable","description":"\u003cstrong\u003eVXDAS EL-50448 is a compact TPMS reset tool engineered to relearn and reset tire pressure sensors on GM vehicles from 2006 through 2026 quickly and without a visit to the dealer.\u003c\/strong\u003e\n\n\u003cp\u003eWhether you swapped tires, replaced a sensor, or rotated wheels, the VXDAS EL-50448 TPMS relearn tool was designed to restore proper TPMS function on compatible GM models—Chevy, Buick, GMC, Cadillac, Opel and similar vehicles—so you can clear dash warnings and maintain correct tire monitoring. It’s portable, easy to use, and intended for cars with up to four tires; it is not a sensor reprogrammer nor suitable for heavy trucks with more than four wheels.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the VXDAS EL-50448 reset a GM vehicle’s TPMS?\u003c\/h3\u003e\n\u003cp\u003eThe tool uses the vehicle’s built-in relearn process to teach the existing OEM sensors their position after a change. You select the proper mode and follow the vehicle’s relearn sequence—left front, right front, right rear, left rear—to pair each sensor to its location.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupports GM relearn protocols for 2006–2026 model years\u003c\/li\u003e\n  \u003cli\u003eTriggers sensor identification from the valve stem area\u003c\/li\u003e\n  \u003cli\u003eFollows standard LF → RF → RR → LR sequence for correct placement\u003c\/li\u003e\n  \u003cli\u003eClears TPMS warning lights once relearn completes successfully\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and sensors are compatible with this tool?\u003c\/h3\u003e\n\u003cp\u003eThe EL-50448 is tailored for GM family vehicles—Chevy, Buick, GMC, Cadillac and Opel—covering many models across the 2006–2026 span. It requires original OEM sensors that are already programmed; this device does not reprogram or clone sensors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with most GM passenger cars and SUVs (2006–2026)\u003c\/li\u003e\n  \u003cli\u003eNot meant for vehicles with external TPMS systems\u003c\/li\u003e\n  \u003cli\u003eNot compatible with heavy trucks having more than four tires\u003c\/li\u003e\n  \u003cli\u003eWorks only when OEM sensors are present and correctly configured\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to use the tool for regular maintenance?\u003c\/h3\u003e\n\u003cp\u003eDesigned for DIYers and technicians, the VXDAS unit is compact and color-coded for quick identification in a toolbox. The interface lets you pick the relearn mode, then you move the tool near each valve stem in sequence to complete the relearn without needing specialized software.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple handheld operation—no laptop or dealer scanner required\u003c\/li\u003e\n  \u003cli\u003eBright orange housing for visibility in a busy garage\u003c\/li\u003e\n  \u003cli\u003ePortable size fits glovebox or tool bag for roadside use\u003c\/li\u003e\n  \u003cli\u003eUseful after tire rotations, sensor replacements, or seasonal tire swaps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat limitations and safety notes should I be aware of?\u003c\/h3\u003e\n\u003cp\u003eThe EL-50448 is a reset\/relearn device rather than a programming tool; it cannot create or reprogram new sensor IDs. Confirm your vehicle’s sensors are OEM and functioning before attempting a relearn, and avoid using it on non-GM or heavy-duty multi-axle trucks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCannot program new sensor IDs—only relearns existing sensors\u003c\/li\u003e\n  \u003cli\u003eNot suitable for heavy trucks or external TPMS setups\u003c\/li\u003e\n  \u003cli\u003eEnsure sensors are OEM and properly installed before use\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle-specific relearn steps for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own or maintain GM-brand cars or SUVs from 2006 to 2026 and want a fast, affordable way to clear TPMS warnings after tire work, the VXDAS EL-50448 is a practical choice. It’s aimed at DIY mechanics, independent shops, and fleet operators with standard four-tire passenger vehicles who need a portable tool to relearn OEM sensors without dealer time or expense.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this tool program new TPMS sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The EL-50448 only relearns existing OEM sensors; it does not program or clone new sensor IDs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it work on my 2010 Chevy or 2024 Cadillac?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if your vehicle is a GM passenger car or SUV from 2006–2026 and uses OEM sensors, the tool supports relearn procedures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VXDAS","offers":[{"title":"Default Title","offer_id":55161557582167,"sku":"B07Z96WWM9","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/vxdas-el-50448-front-view.jpg?v=1790329433"},{"product_id":"white-knight-m14x1-5-lug-nuts-chrome-1-56in-duplex-bulge-acorn-solid-one-piece-4-pack-7-8in-hex","title":"White Knight M14x1.5 Lug Nuts — Chrome 1.56in Duplex Bulge Acorn, Solid One-Piece 4-Pack (7\/8in Hex)","description":"\u003cp\u003e\u003cstrong\u003eWhite Knight M14x1.5 lug nuts are OEM-style duplex bulge acorns in chrome, built as one-piece forged carbon steel fasteners to fit select Chevy, Chrysler, Dodge and Ram wheels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese White Knight lug nuts replace factory-style acorn nuts with a solid-piece construction and a polished finish designed to maintain wheel appearance while delivering reliable clamping strength. They use a 7\/8\" hex drive, measure 1.56\" overall, and thread M14x1.50 — matching many GM and CDJR original equipment specifications. Chrome plating resists color stripping better than painted finishes, and the traditional bulge-acorn profile preserves wheel aesthetics and hub clearance.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my Chevy, Chrysler, Dodge or Ram?\u003c\/h3\u003e\n\u003cp\u003eThey fit vehicles and wheels that require an M14x1.50 thread pitch with a 1.56\" length and OEM-style bulge acorn seat. Confirm your vehicle’s wheel nut specifications in the owner’s manual or from the wheel manufacturer before ordering. Fitment depends on thread, seat style, overall height and hex size.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eM14 x 1.50 thread pitch — matches many GM and CDJR applications.\u003c\/li\u003e\n  \u003cli\u003e1.56\" overall height and 1.06\" body diameter for OEM clearance.\u003c\/li\u003e\n  \u003cli\u003e7\/8\" hex drive — use standard socket tools for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe are White Knight solid-piece lug nuts?\u003c\/h3\u003e\n\u003cp\u003eWhite Knight lug nuts are cold-forged from carbon steel and tested to industry standards to give dependable clamping and long service life. The solid one-piece design avoids failures caused by multi-piece construction, while the chrome finish helps resist corrosion and keep a factory look. Always torque to vehicle specifications to ensure secure installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCold-forged carbon steel construction for strength and consistency.\u003c\/li\u003e\n  \u003cli\u003eChrome plating to reduce color stripping and surface corrosion.\u003c\/li\u003e\n  \u003cli\u003eIndustry-standard testing and a 1-year manufacturer warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these differ from painted or aftermarket decorative lug nuts?\u003c\/h3\u003e\n\u003cp\u003eUnlike painted options that can chip or wear, White Knight’s chrome or black-chrome finishes are more resistant to color loss and environmental wear. These parts are engineered to be functional, matching OEM dimensions and hex drive for straightforward installation. They prioritize fit and durability over purely decorative designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChrome finish versus painted finish — improved resistance to stripping.\u003c\/li\u003e\n  \u003cli\u003eOEM-style bulge-acorn shape to maintain wheel manufacturer intent.\u003c\/li\u003e\n  \u003cli\u003eStandard 7\/8\" hex for quick, familiar installation with common tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and maintenance points should I follow?\u003c\/h3\u003e\n\u003cp\u003eVerify thread size, seat type, length and hex size for your wheels before fitting. Use a calibrated torque wrench and tighten to the vehicle maker’s specified torque sequence and values to prevent wheel damage or safety issues. Inspect periodically for corrosion or loosening, and replace any lug nut that shows deformation or thread damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck vehicle\/wheel manual for torque and fitment specs.\u003c\/li\u003e\n  \u003cli\u003eInstall with a 7\/8\" socket and torque per manufacturer instructions.\u003c\/li\u003e\n  \u003cli\u003eReplace if threads are damaged or chrome plating is compromised.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These White Knight M14x1.5 duplex bulge acorn lug nuts suit owners of select Chevrolet, Chrysler, Dodge and Ram vehicles who need OEM-style replacements or upgrades that balance polished appearance with durable, cold-forged construction. They’re a practical choice for drivers who prefer factory-fit hardware, professional installers and anyone replacing lost or damaged original lug nuts. Remember to confirm fitment details for your specific wheels and follow proper installation torque procedures; White Knight offers a 1-year manufacturer warranty and customer support at cs@whtknight.com for warranty or fitment questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts compatible with all GM and CDJR wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit wheels that require M14x1.50 threads, 1.56\" length, OEM bulge-acorn seat and 7\/8\" hex. Verify your wheel or vehicle manual for exact fitment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What torque should I use when installing these lug nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use the torque specification from your vehicle or wheel manufacturer and a calibrated wrench; torque values vary by vehicle and wheel material.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"White Knight","offers":[{"title":"Default Title","offer_id":55161562988887,"sku":"B00DNPGJPY","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/white-knight-front-packaging-chrome-lug-nuts.jpg?v=1790329517"},{"product_id":"spigen-magnetic-valve-stem-caps-red-4-pack-magnetic-tpu-with-sealed-o-ring","title":"Spigen Magnetic Valve Stem Caps — Red 4-Pack, Magnetic TPU with Sealed O-Ring","description":"\u003cp\u003e\u003cstrong\u003eSpigen Magnetic Car Tire Valve Caps in red are a four-pack of magnetic, sealed valve stem caps that protect Schrader valves while snapping securely to metal surfaces when removed.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese caps combine a magnetic retention system with a soft, durable TPU body engineered to match contemporary alloy finishes—particularly Tesla wheels—while keeping out dirt, water and road salt. They screw on finger-tight to standard Schrader valve stems, provide a sealed O-ring barrier to help preserve the valve core, and include strip-resistant threading that reduces cross-threading risk on OEM rims.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these valve caps stay put when I remove them?\u003c\/h3\u003e\n\u003cp\u003eEach cap has an integrated magnet so when you remove it during inflation or pressure checks, it adheres to nearby metal surfaces—like the wheel hub or brake caliper—avoiding drops and loss. The magnetic hold keeps caps within reach and reduces time searching for dropped parts after service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in magnet for quick attachment to steel or alloy wheel areas\u003c\/li\u003e\n  \u003cli\u003ePrevents caps from falling into wheel wells or onto the road\u003c\/li\u003e\n  \u003cli\u003eHelps keep hands free and tools organized during tire pressure checks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my car’s valve stems and stand up to weather?\u003c\/h3\u003e\n\u003cp\u003eThey’re made to fit any standard Schrader valve stem found on most passenger vehicles and light trucks. A molded inner O-ring seals against dust and moisture while the TPU construction resists cracking, fading and chemical exposure from road salts and cleaners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUniversal Schrader compatibility (Tesla Model Y\/3\/S\/X verified)\u003c\/li\u003e\n  \u003cli\u003eInner O-ring blocks dust, water and corrosion-causing salts\u003c\/li\u003e\n  \u003cli\u003eTPU material is colorfast and crack-resistant for long-term use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy are they to install and remove without damaging rims?\u003c\/h3\u003e\n\u003cp\u003eCaps thread on and off by hand—no tools required—so you can check pressure or swap wheels quickly. Threads are designed to self-align to minimize cross-threading on factory rims, and the soft TPU exterior reduces the chance of scratching painted wheel surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFinger-tightenable for fast on\/off access\u003c\/li\u003e\n  \u003cli\u003eSelf-aligning thread reduces risk of damaging valve or rim\u003c\/li\u003e\n  \u003cli\u003eSoft-touch exterior protects OEM finishes during handling\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes these a good accessory gift or upgrade?\u003c\/h3\u003e\n\u003cp\u003eThe caps blend practical protection with a visible accent—red finish adds a sporty touch while performing useful functions like sealing and magnetic retention. They’re compact, reusable, and come in a convenient four-pack suitable for a full-vehicle refresh or gifting to a driver who values tidy maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour-pack covers all wheels on most cars and SUVs\u003c\/li\u003e\n  \u003cli\u003eAttractive red finish that complements modern wheel designs\u003c\/li\u003e\n  \u003cli\u003eDurable, reusable, and suitable as a thoughtful practical gift\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers who want a small, long-lasting upgrade that prevents lost valve caps, protects valve cores from road grime, and adds a visual accent to their wheels. They’re especially suited for Tesla owners (Model Y Juniper L, Model Y\/3\/S\/X) seeking color-matched, non-abrasive hardware, as well as anyone with vehicles that use standard Schrader valves—commuters, family cars, weekend drivers, and gift shoppers looking for a useful car accessory.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these fit all tire valve stems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They fit any standard Schrader valve stem used on most cars, SUVs and light trucks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the magnets strong enough to hold on while driving?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Magnets secure caps to nearby metal surfaces when removed, but caps should remain threaded while driving.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Spigen","offers":[{"title":"Default Title","offer_id":55161570918743,"sku":"B0GKJSRD54","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/spigen-valve-caps-front-view.jpg?v=1790329661"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/collections\/bg-cat-tyres.jpg?v=1790153426","url":"https:\/\/britishgarage.co.uk\/collections\/tyres-and-wheels.oembed","provider":"British Garage","version":"1.0","type":"link"}