{"product_id":"bulletpoint-locking-adjustable-carbon-fiber-kevlar-mounting-arm-dual-20mm-sockets-7cm-to-7cm-9-lock-positions","title":"Bulletpoint Locking Adjustable Carbon Fibre Kevlar Mounting Arm — Dual 20mm Sockets, 7cm-to-7cm, 9 Lock Positions","description":"\u003cstrong\u003eBulletpoint’s Locking Adjustable Carbon Fiber Kevlar Mounting Arm is a lightweight, high-strength articulating arm with dual 20mm socket ends and nine locking positions for precise device placement.\u003c\/strong\u003e\n\n\u003cp\u003eBuilt from carbon fiber reinforced with Kevlar, this 7cm-to-7cm articulating mounting arm delivers strong, stiff support with minimal weight. It uses two 7cm segments connected by a locking articulating elbow that rotates up to 90° in each direction, and aluminum connector ends sized for 20mm ball mounts so it integrates seamlessly with Bulletpoint device holders and accessories.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the articulating joint improve positioning?\u003c\/h3\u003e\n\u003cp\u003eThe central articulating elbow gives you repeatable, lockable angles so you can set and maintain a specific orientation under load. Its design balances smooth motion for adjustment with positive lock points for stability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNine distinct adjustment positions across the elbow for consistent setups\u003c\/li\u003e\n  \u003cli\u003e90° range of motion in each direction for wide angle selection\u003c\/li\u003e\n  \u003cli\u003ePositive-lock mechanism to resist slippage once set\u003c\/li\u003e\n  \u003cli\u003eCompact 7cm arms reduce leverage while preserving reach and control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this arm fit my Bulletpoint device holders and accessories?\u003c\/h3\u003e\n\u003cp\u003eYes—both ends use a 20mm socket size designed to mate with Bulletpoint’s ecosystem of ball-based holders and mounts. The aluminum socket connectors provide a precise interface that works with compatible balls and clamps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual 20mm socket ends match Bulletpoint ball-joint accessories\u003c\/li\u003e\n  \u003cli\u003eAluminum connector ends for dimensional accuracy and wear resistance\u003c\/li\u003e\n  \u003cli\u003eDirect compatibility with Bulletpoint holders, clamps, and plates\u003c\/li\u003e\n  \u003cli\u003eIdeal as a middle link between two mounting elements or as an adjustable arm for a single holder\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and lightweight is the carbon fiber + Kevlar construction?\u003c\/h3\u003e\n\u003cp\u003eThe arm combines carbon fiber’s stiffness with Kevlar’s impact resistance to produce a part that’s both rigid and tough without adding bulk. The result is an arm that supports devices reliably while keeping weight low—useful where both strength and minimal mass matter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarbon fiber body for high stiffness-to-weight ratio\u003c\/li\u003e\n  \u003cli\u003eKevlar reinforcement to improve abrasion and impact resistance\u003c\/li\u003e\n  \u003cli\u003eAluminum sockets for secure connector interfaces\u003c\/li\u003e\n  \u003cli\u003eLow overall weight reduces load on clamps and mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat adjustments and limits should I expect during use?\u003c\/h3\u003e\n\u003cp\u003eThe arm’s nine-lock positions let you fine-tune angles, but its compact 7cm-to-7cm layout imposes modest reach compared with longer arms. It’s intended for moderate loads and precise placement rather than heavy structural support.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNine locking positions for repeatable orientation\u003c\/li\u003e\n  \u003cli\u003eMaximum 90° articulation each direction from center position\u003c\/li\u003e\n  \u003cli\u003eRecommended for lightweight to medium-weight devices and accessories\u003c\/li\u003e\n  \u003cli\u003eShort 7cm arms keep leverage low for stable setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Bulletpoint Locking Adjustable Carbon Fiber Kevlar Mounting Arm is aimed at photographers, videographers, audio engineers, and makers who need a compact, precise articulating link that integrates with Bulletpoint ball-mount gear. Choose this arm when you want a lightweight, stiff connector to position cameras, monitors, lights, or sensors in tight spaces where repeatable angles and low mass are priorities.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What devices will this arm support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It supports lightweight to medium-weight devices like cameras, monitors, lights, and phone holders when paired with compatible Bulletpoint mounts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the socket ends compatible with other systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 20mm socket ends are designed for Bulletpoint ball-mount accessories; third-party compatibility depends on matching 20mm ball dimensions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bulletpoint","offers":[{"title":"Default Title","offer_id":55167706104151,"sku":"B0CLXMBHBZ","price":46.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/bulletpoint-front-view-arm.jpg?v=1790391437","url":"https:\/\/britishgarage.co.uk\/products\/bulletpoint-locking-adjustable-carbon-fiber-kevlar-mounting-arm-dual-20mm-sockets-7cm-to-7cm-9-lock-positions","provider":"British Garage","version":"1.0","type":"link"}