{"product_id":"cnraqr-fuel-cell-breather-vent-15mm-with-10an-female-fitting-0-85µm-fine-mesh-high-flow-chrome","title":"CNRAQR Fuel Cell Breather Vent 15mm with 10AN Female Fitting — 0.85µm Fine Mesh, High-Flow Chrome","description":"\u003cstrong\u003eCNRAQR 15mm Fuel Cell Breather\/Vent Air Filter with 10AN female fitting is a compact, high-flow vent designed to keep fuel tanks and catch cans ventilated while filtering out particulates down to a fine 0.85 micron mesh.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact breather\/vent assembly combines a small-footprint air filter with a 10AN (7\/8-14 UNF) female threaded fitting to give fuel systems cleaner ventilation and reduced intake of hot engine-compartment air. Built from aluminum alloy with a chrome finish and a 20-mesh fine grid, the unit is sized for tight installations and aims to balance airflow with effective particle capture.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this breather improve ventilation without drawing hot engine air?\u003c\/h3\u003e\n\u003cp\u003eThe 20-mesh grid straightens airflow and increases usable airflow paths so the vent draws ambient air rather than turbulent, heated air from the engine bay. Its compact shape and 15mm mounting hole let you position it away from heat sources while maintaining proper tank pressure equalization.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFine 0.85 micron mesh for high filtration efficiency (up to 95% capture rate).\u003c\/li\u003e\n  \u003cli\u003e20-mesh grid design that reduces swirl and straightens incoming air.\u003c\/li\u003e\n  \u003cli\u003eSmall 15mm mount diameter for flexible placement in tight spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter fit my fuel cell or catch can?\u003c\/h3\u003e\n\u003cp\u003eThe filter is intended for applications using a 10AN (7\/8-14 UNF) female thread and a 15mm mounting hole. Its compact 2.2-inch height and 2-inch width make it compatible with many aftermarket fuel cells, catch cans, and breather locations, but always confirm thread and clearance before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFemale fitting: 10AN (7\/8-14 UNF).\u003c\/li\u003e\n  \u003cli\u003eMount hole diameter: 15mm \/ 0.59\".\u003c\/li\u003e\n  \u003cli\u003eOverall filter body: 2.2\" height (excluding fittings) × 2\" width.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits can I expect from this vent kit?\u003c\/h3\u003e\n\u003cp\u003eThe CNRAQR breather is designed to help maintain cleaner ventilation and improve throttle response by allowing freer airflow into the fuel system without excessive contamination. While results depend on the vehicle and installation, the mesh and construction are chosen to provide a strong balance of flow and particle capture.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUp to 95% filtration efficiency under typical conditions.\u003c\/li\u003e\n  \u003cli\u003eMesh density (0.85 micron) for fine particle retention.\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy + chrome finish for light weight and corrosion resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain the CNRAQR vent?\u003c\/h3\u003e\n\u003cp\u003eProfessional installation is recommended to ensure proper sealing, thread compatibility, and optimal placement away from heat sources. Maintenance is straightforward: periodic inspection and gentle cleaning will extend service life and maintain performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall with a compatible 10AN port and 15mm mounting hole.\u003c\/li\u003e\n  \u003cli\u003eCheck placement to avoid hot engine compartments or direct exhaust streams.\u003c\/li\u003e\n  \u003cli\u003eClean mesh with low-pressure air or mild solvent if contaminated; do not use aggressive brushes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis kit includes one CNRAQR air filter and one 10AN female fitting. No installation instructions are provided, so professional fitment is advised to ensure thread seal and secure mounting.\u003c\/p\u003e\n\n\u003cp\u003eWho is this for: Automotive enthusiasts, race teams, and anyone adding or upgrading a fuel cell, catch can, or tank vent where a compact, high-flow filtered breather is needed. It suits installations that require a durable, small-profile vent with fine filtration and a 10AN connection, particularly where controlling intake of hot engine air and particulate is important.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include the 10AN fitting?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the package contains one air filter and one 10AN (7\/8-14 UNF) female fitting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Professional installation is recommended to ensure correct thread sealing and optimal placement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"CNRAQR","offers":[{"title":"Default Title","offer_id":55161596019031,"sku":"B0F6N6FQ63","price":29.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/cnraqr-front-view-assembly.jpg?v=1790329989","url":"https:\/\/britishgarage.co.uk\/products\/cnraqr-fuel-cell-breather-vent-15mm-with-10an-female-fitting-0-85%c2%b5m-fine-mesh-high-flow-chrome","provider":"British Garage","version":"1.0","type":"link"}