{"product_id":"cxdar-led-third-brake-light-for-2003-2016-ford-expedition-lincoln-navigator-black-waterproof-high-mount-stop-lamp","title":"Cxdar LED Third Brake Light for 2003–2016 Ford Expedition \u0026 Lincoln Navigator — Black, Waterproof High‑Mount Stop Lamp","description":"\u003cp\u003e\u003cstrong\u003eThe Cxdar Third 3rd Brake Light is a direct-fit, waterproof LED high‑mount stop lamp designed to replace the factory center brake light on 2003–2016 Ford Expedition and 2003–2016 Lincoln Navigator models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis aftermarket high‑mount brake lamp combines a low‑power LED array with an ABS housing and sealed gasket for reliable road use. It installs with the factory wiring harness for a plug‑and‑play swap and restores the center stop light function after damage, wear, or upgrade. Built to withstand wet conditions and everyday driving, the Cxdar assembly brings consistent illumination and a refreshed appearance to older SUVs.\u003c\/p\u003e\n\n\u003ch3\u003eWill this brake light fit my 2003–2016 Ford Expedition or Lincoln Navigator?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the Cxdar third brake light is manufactured to match the original mounting points and electrical connector for those model years. It targets both Ford Expedition and Lincoln Navigator vehicles listed from 2003 through 2016, so it works as a direct replacement in most cases.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with Ford Expedition model years 2003–2016.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Lincoln Navigator model years 2003–2016.\u003c\/li\u003e\n  \u003cli\u003eUses the factory plug for simple electrical hookup.\u003c\/li\u003e\n  \u003cli\u003eDesigned to match OEM mounting locations for a secure fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weatherproof is this center brake lamp?\u003c\/h3\u003e\n\n\u003cp\u003eThe lamp features an ABS housing and a sturdy lens with a sealed gasket rated to resist water, dust, and snow exposure. The IP65-style protection helps prevent moisture intrusion and corrosion, extending the assembly's service life under typical driving conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRugged ABS body resists cracks and impact from road debris.\u003c\/li\u003e\n  \u003cli\u003eSealed cover and gasket reduce water and dust entry.\u003c\/li\u003e\n  \u003cli\u003eLED design lowers heat output and energy draw for longer life.\u003c\/li\u003e\n  \u003cli\u003eIdeal for regions with rain, snow, or road spray.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation, and what should I watch for?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is plug‑and‑play with the factory connector, so most DIYers can complete the swap using basic tools. The manufacturer recommends not fully tightening fasteners initially to avoid stress cracking the housing; hand‑start screws and align the lamp before final torque.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConnects to the existing OEM wiring harness—no splicing needed.\u003c\/li\u003e\n  \u003cli\u003eStart screws by hand, then tighten evenly to avoid cracking.\u003c\/li\u003e\n  \u003cli\u003eHand tools are usually sufficient; professional install optional.\u003c\/li\u003e\n  \u003cli\u003eInspect bulb function before finalizing the mounting screws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat lighting and performance benefits does this LED assembly provide?\u003c\/h3\u003e\n\n\u003cp\u003eCompared with older incandescent units, this LED high‑mount lamp uses less power while offering consistent illumination and quicker response time. The updated styling also refreshes the rear appearance and can improve visibility to drivers behind the vehicle.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLower electrical draw than traditional bulbs for less load on the circuit.\u003c\/li\u003e\n  \u003cli\u003eFaster LED reaction time can aid in clearer signaling when braking.\u003c\/li\u003e\n  \u003cli\u003eSleek black housing modernizes the vehicle’s rear look.\u003c\/li\u003e\n  \u003cli\u003eLonger expected service life under normal conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Owners of 2003–2016 Ford Expedition or Lincoln Navigator SUVs who need a reliable, direct‑replacement center brake light—whether replacing a damaged factory lamp, updating to LED, or restoring rear visibility. It suits do‑it‑yourself installers who prefer plug‑and‑play parts as well as shops looking for a durable, weather‑resistant stop lamp to fit these specific models.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this a direct replacement for my 2010 Ford Expedition?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Cxdar third brake light is made to directly fit 2003–2016 Ford Expedition models and uses the factory wiring connector.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the light resist rain and snow?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The sealed ABS housing and gasket provide water and dust resistance suitable for wet and snowy conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Cxdar","offers":[{"title":"Default Title","offer_id":55166720278871,"sku":"B0DB1SW15Q","price":38.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/cxdar-third-brake-light-front-assembly_7da648d9-8f78-449b-8ce8-667d4543dd6f.jpg?v=1790370779","url":"https:\/\/britishgarage.co.uk\/products\/cxdar-led-third-brake-light-for-2003-2016-ford-expedition-lincoln-navigator-black-waterproof-high-mount-stop-lamp","provider":"British Garage","version":"1.0","type":"link"}