{"product_id":"daiertek-12v-latching-push-button-switch-16mm-blue-led-metal-waterproof-5-pack-with-labels","title":"DAIERTEK 12V Latching Push Button Switch 16mm Blue LED — Metal Waterproof, 5‑Pack with Labels","description":"\u003cp\u003e\u003cstrong\u003eDAIERTEK 12V latching push button switch is a 16mm metal, waterproof ON\/OFF control with a blue LED, five-pin wiring, and self-locking action — sold as a 5-pack with labels and harnesses.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for panels, vehicles, boats and DIY control projects, this compact switch combines a durable anodized metal body with an illuminated indicator and a reliable maintained (self-locking) action. The switch uses a five-pin arrangement providing one normally open (NO) and one normally closed (NC) contact for flexible wiring; it arrives pre-wired with a harness and 50 adhesive labels so you can mark functions quickly. Rated IP65, it’s designed to resist water spray and dust, and it fits standard 16mm (5\/8 inch) panel cutouts.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the latching mechanism work for everyday use?\u003c\/h3\u003e\n\u003cp\u003eThe DAIERTEK latching push button is maintained: press once to turn a circuit on and it stays on after you release, press again to turn it off. This is ideal for functions that require a stable state (lights, pumps, accessories) without holding the button down. The five-pin layout also lets you wire indicator LED and switching contacts separately.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintained ON\/OFF operation—press to latch, press again to unlatch.\u003c\/li\u003e\n  \u003cli\u003e1 NO and 1 NC contact for flexible control logic.\u003c\/li\u003e\n  \u003cli\u003eSeparate LED pin for illuminated status at 12V DC.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this switch safe for marine and outdoor installations?\u003c\/h3\u003e\n\u003cp\u003eYes—DAIERTEK designed this switch with IP65 sealing and an aluminum anodized body to handle wet, dusty, or splash-prone environments. The housing repels moisture and the panel gasket helps prevent ingress at the mounting point. Still, avoid direct submersion; IP65 covers spraying water and particles, not continuous immersion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP65 rating for splash and dust resistance.\u003c\/li\u003e\n  \u003cli\u003eAluminum anodized bezel for corrosion resistance in coastal settings.\u003c\/li\u003e\n  \u003cli\u003ePanel gasket included for secure mounting in exposed locations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical specifications should I consider before installing?\u003c\/h3\u003e\n\u003cp\u003eThe switch is optimized for 12V DC systems and includes a blue LED rated for 12V illumination. Contact ratings are suitable for many accessory circuits but check inrush currents of motors or pumps. If you plan to use the LED at higher voltages, add the recommended resistor to protect the diode.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperating voltage: 12V DC for LED illumination.\u003c\/li\u003e\n  \u003cli\u003eContact rating: 5A at 12V DC (confirm load requirements before use).\u003c\/li\u003e\n  \u003cli\u003eFor 120V LED use, connect a ~150 kΩ resistor in series with the LED pin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I mount and label the switch on my panel?\u003c\/h3\u003e\n\u003cp\u003eCut a 16mm (5\/8 inch) diameter hole in your panel for a secure snap-in or threaded mount, then tighten the bezel nut for a flush finish. The pack includes 50 adhesive icons so you can quickly identify each switch’s function without custom printing. Wiring is straightforward with the pre-attached harness—match the LED and contact pins based on your schematic.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePanel hole size: 16mm (5\/8 inch) standard fit.\u003c\/li\u003e\n  \u003cli\u003eIncludes 50 adhesive labels\/icons for quick identification.\u003c\/li\u003e\n  \u003cli\u003ePre-wired harness simplifies connection to LEDs and contacts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 5-pack of DAIERTEK latching push button switches suits hobbyists, electricians, marine installers, RV owners and small equipment builders who need a compact, illuminated, durable ON\/OFF control. It’s especially useful when you want a reliable maintained switch with clear visual feedback for dashboards, accessory panels, lighting circuits or DIY control boxes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the LED work on 12V systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the switch LED is designed for 12V DC. For higher voltages, add a 150 kΩ resistor in series with the LED.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What panel hole size is required?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Mounting requires a 16mm (5\/8 inch) hole and the pack includes a gasket and nut for secure installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAIERTEK","offers":[{"title":"Default Title","offer_id":55161010028887,"sku":"B097N7RBFP","price":30.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/daiertek-front-view-blue-led-switch.jpg?v=1790320711","url":"https:\/\/britishgarage.co.uk\/products\/daiertek-12v-latching-push-button-switch-16mm-blue-led-metal-waterproof-5-pack-with-labels","provider":"British Garage","version":"1.0","type":"link"}