{"product_id":"dptool-m14x1-25-spark-plug-thread-chaser-kit-2-length-back-tap-hardened-42crmo-steel","title":"DPTOOL M14x1.25 Spark Plug Thread Chaser Kit — 2-Length Back Tap, Hardened 42CrMo Steel","description":"\u003cp\u003e\u003cstrong\u003eDPTOOL 14mm Back Tap Spark Plug Thread Repair Kit is a pair of M14x1.25 thread chasers (short and long) designed to restore damaged spark plug threads without removing the cylinder head.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis thread repair set provides a reusable, mechanical way to clean and reform stripped or cross-threaded spark plug holes. Made from heat-treated 42CrMo steel (equivalent to 4140), the tools are hardened for durability and built to resist chipping while you re-cut or chase threads. The kit includes two lengths so you can reach shallow and deep spark plug wells across a broad range of vehicles, and the recommended technique uses grease to trap and remove metal shavings rather than allowing debris to fall into the combustion chamber.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the DPTOOL thread chaser repair spark plug holes safely?\u003c\/h3\u003e\n\n\u003cp\u003eThe chasers are designed to follow and re-form existing M14x1.25 threads rather than cut new ones aggressively, reducing the risk of creating loose or oversized threads. Use grease to capture metal particles so they withdraw with the tool, and work slowly—advancing, backing off, and repeating—to avoid driving debris into the bore.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eChasing action reforms damaged threads rather than removing excessive material.\u003c\/li\u003e\n  \u003cli\u003eGrease traps metal shavings and prevents debris from entering the cylinder.\u003c\/li\u003e\n  \u003cli\u003eTwo lengths (5.27\" and 10.3\") reach short and deep wells for many engines.\u003c\/li\u003e\n  \u003cli\u003eHardened 42CrMo steel resists wear and impact during repeated use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and spark plug types will this M14x1.25 kit work with?\u003c\/h3\u003e\n\n\u003cp\u003eThis DPTOOL kit targets spark plug holes sized M14x1.25, a common thread pitch in many imported and domestic engines. The two included lengths increase compatibility with engines where plugs are recessed or located under deep wells or ignition coils.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits engines requiring M14x1.25 spark plugs.\u003c\/li\u003e\n  \u003cli\u003eShort (5.27\") chaser for shallow wells and tight clearances.\u003c\/li\u003e\n  \u003cli\u003eLong (10.3\") chaser for recessed plugs and deep spark plug tubes.\u003c\/li\u003e\n  \u003cli\u003eSuits both coil-on-plug and older plug-in-well configurations when access allows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the recommended technique and maintenance for the tools?\u003c\/h3\u003e\n\n\u003cp\u003eUse the chasers straight, apply grease to the threads to collect swarf, and turn slowly, backing off frequently to clear material. If resistance increases, reverse slightly and then continue forward; repeat until the thread runs smoothly. After use, clean and lightly oil the tools to protect the hardened steel and preserve cutting edges.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInsert straight, expand, and back-thread 3–5 times as a starting routine.\u003c\/li\u003e\n  \u003cli\u003eTurn slowly and alternate directions when you encounter tight spots.\u003c\/li\u003e\n  \u003cli\u003eUse grease to capture shavings and extract them with the chaser.\u003c\/li\u003e\n  \u003cli\u003eClean, dry, and apply a light oil coat for storage to prevent corrosion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these chasers and what materials are they made from?\u003c\/h3\u003e\n\n\u003cp\u003eDPTOOL uses 42CrMo steel, metallurgically similar to 4140, that has been quenched and tempered for toughness and hardness. That composition gives the tools good fatigue resistance and impact toughness, reducing the chance of breakage when working older, corroded, or partially damaged plug holes.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e42CrMo (equivalent to 4140) provides high strength and hardenability.\u003c\/li\u003e\n  \u003cli\u003eQuenched and tempered for improved impact resistance and fatigue life.\u003c\/li\u003e\n  \u003cli\u003ePrecision-ground geometry for reliable thread engagement and alignment.\u003c\/li\u003e\n  \u003cli\u003eBuilt to resist chipping and wear during repeated repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The DPTOOL 14mm Back Tap Spark Plug Thread Repair Kit is aimed at mechanics, home technicians, and DIY car owners who need a fast, cost-effective way to restore damaged M14x1.25 spark plug threads without removing the cylinder head. It’s useful for workshops that encounter cross-threaded or corroded plug holes and for anyone who prefers a mechanical thread chase that traps shavings and helps avoid engine contamination during repair.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit work on my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your spark plugs use M14x1.25 threads, the DPTOOL chasers will fit; the two lengths cover shallow and deep plug wells.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to remove the cylinder head to use it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The chasers are designed to restore threads in-place without removing the cylinder head when used carefully.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DPTOOL","offers":[{"title":"Default Title","offer_id":55168421101911,"sku":"B0BNQFK9X1","price":57.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/dptool-front-packaging-14mm-thread-chaser-kit.jpg?v=1790403510","url":"https:\/\/britishgarage.co.uk\/products\/dptool-m14x1-25-spark-plug-thread-chaser-kit-2-length-back-tap-hardened-42crmo-steel","provider":"British Garage","version":"1.0","type":"link"}