{"product_id":"dynofit-2-inch-5x4-5-wheel-spacers-80-5mm-hub-bore-forged-6061-t6-grade-10-9-studs","title":"dynofit 2-inch 5x4.5 Wheel Spacers 80.5mm Hub Bore — Forged 6061-T6, Grade 10.9 Studs","description":"\u003cp\u003e\u003cstrong\u003eDynofit 2-inch forged wheel spacers widen your wheel track to clear larger tires and stop caliper rub while adding a stable, aggressive stance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese spacers are designed for vehicles that use a 5x4.5 (5x114.3mm) bolt pattern with an 80.5mm hub bore and 1\/2\"-20 studs. Machined from forged 6061-T6 aluminum and fitted with Grade 10.9 Dacromet studs, they prioritize strength and predictable deformation under extreme loads rather than brittle failure. Each spacer measures 2\" (50.8mm) thick and ships after a thorough pre-shipment inspection backed by dynofit's one-year after-sales support.\u003c\/p\u003e\n\n\u003ch3\u003eWill these spacers fit my Jeep, Ford or Dodge model?\u003c\/h3\u003e\n\n\u003cp\u003eCompatibility depends on bolt pattern, hub bore, and stud thread. These spacers are made for a 5x4.5 inch (5x114.3mm) PCD and an 80.5mm hub bore with 1\/2\"-20 thread pitch, so they are suitable for many Jeep and Ford models listed below when those three parameters match.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eJeep: Cherokee XJ (1984–2013), Wrangler TJ (1997–2006), Grand Cherokee ZJ (1992–1998), Liberty KJ\/KK (2001–2013), others\u003c\/li\u003e\n  \u003cli\u003eFord: Mustang (2005–2014), Ranger (1982–2012), Explorer (1990–2018), Edge (2006–2014) and additional Ford platforms\u003c\/li\u003e\n  \u003cli\u003eDodge\/Ford legacy: Dakota (1987–1990), Crown Victoria (1992–2011) compatibility when hub bore and PCD match\u003c\/li\u003e\n  \u003cli\u003eAlways verify your vehicle’s hub bore, bolt pattern, and stud pitch before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does forging and stud choice improve safety versus cast kits?\u003c\/h3\u003e\n\n\u003cp\u003eForged 6061-T6 aluminum has a denser grain structure and higher toughness than cast parts, which reduces the chance of catastrophic cracking. The Grade 10.9 Dacromet studs are specified to yield or deform under extreme loads instead of snapping, providing a controlled failure mode that installers and drivers prefer.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eForged aluminum resists fracture better than brittle cast alloys\u003c\/li\u003e\n  \u003cli\u003eGrade 10.9 studs offer higher tensile strength and controlled deformation\u003c\/li\u003e\n  \u003cli\u003eDacromet coating resists corrosion for longer life in wet climates\u003c\/li\u003e\n  \u003cli\u003ePre-shipment inspection helps ensure each kit meets safety expectations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and fitment changes can I expect after installation?\u003c\/h3\u003e\n\n\u003cp\u003eAdding 2\" of spacer thickness per wheel moves the tire outward, which increases track width and reduces the risk of caliper or inner tire rub. The wider stance can improve lateral stability and provide the visual appearance of a more aggressive setup, but alignment and handling characteristics may change depending on tire size and suspension geometry.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e2\" increase per wheel creates more clearance for larger tires\u003c\/li\u003e\n  \u003cli\u003eReduced brake caliper rubbing on aftermarket or oversized tires\u003c\/li\u003e\n  \u003cli\u003ePotentially improved cornering stability with a wider track\u003c\/li\u003e\n  \u003cli\u003eRecommend re-torque to 75–85 ft·lb and inspect installation regularly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and maintenance steps should I follow?\u003c\/h3\u003e\n\n\u003cp\u003eProper fitment and torque are essential for long-term reliability. Use the recommended torque range and confirm hub centric fit where possible; if the hub bore is larger than the vehicle hub, use appropriate centering rings or choose a spacer with matching bore size.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHand-start all studs then torque to 75–85 ft·lb in a star pattern\u003c\/li\u003e\n  \u003cli\u003eVerify hub bore engagement and use centering rings if needed\u003c\/li\u003e\n  \u003cli\u003eCheck for wheel-to-brake clearance after mounting tires\u003c\/li\u003e\n  \u003cli\u003eRe-torque lugs after 50–100 miles and inspect periodically\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: These dynofit spacers suit owners who need 2 inches of added wheel offset for clearance or style—particularly drivers of Jeep XJ\/TJ\/ZJ, Liberty, many Ford models (Mustang, Ranger, Explorer, Edge), and certain Dodge\/Ford legacy vehicles—provided their hub bore and bolt pattern match. Choose these spacers if you want a forged, corrosion-resistant kit with high-strength studs and manufacturer support rather than an inexpensive cast alternative. Always confirm vehicle-specific fitment before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What bolt pattern and hub bore does this spacer use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It uses a 5x4.5 (5x114.3mm) bolt pattern with an 80.5mm hub bore and 1\/2\"-20 stud thread pitch.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What torque should I use on the wheel studs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Torque lug nuts to 75–85 ft·lb in a star pattern and re-torque after 50–100 miles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"dynofit","offers":[{"title":"Default Title","offer_id":55170791276887,"sku":"B078RHQYF9","price":157.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/dynofit-front-view-spacer-kit.jpg?v=1790434260","url":"https:\/\/britishgarage.co.uk\/products\/dynofit-2-inch-5x4-5-wheel-spacers-80-5mm-hub-bore-forged-6061-t6-grade-10-9-studs","provider":"British Garage","version":"1.0","type":"link"}