{"product_id":"evil-energy-300ml-universal-2-port-baffled-oil-catch-can-kit-aluminum-reservoir-removable-baffle","title":"EVIL ENERGY 300ml Universal 2-Port Baffled Oil Catch Can Kit — Aluminium Reservoir, Removable Baffle","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 300ml Universal 2-Port Baffled Oil Catch Can Kit is a compact, serviceable crankcase ventilation accessory that traps oil and moisture before they reach the intake, helping keep intake components cleaner.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis universal two-port catch can is designed to intercept blow-by vapors from the crankcase and separate oil and condensation with a removable baffle, then return cleaner gases to the intake or vent them through an optional breather. The kit ships with a wear- and heat-resistant NBR hose, standard M16*1.5 threaded ports, and a 300ml lightweight aluminium reservoir sized for most street applications. It’s intended for do-it-yourself or professional installation where space and hose routing allow.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the baffled design capture oil and moisture?\u003c\/h3\u003e\n\u003cp\u003eThe internal removable baffle creates turbulence that forces heavier oil droplets and water to condense and collect in the canister instead of passing into the intake tract. Adding steel wool in the chamber increases surface area and improves separation for finer droplets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemovable baffle for improved vapor separation\u003c\/li\u003e\n  \u003cli\u003eOptional steel wool placement to trap micro-droplets\u003c\/li\u003e\n  \u003cli\u003e300ml capacity for frequent monitoring and drainage\u003c\/li\u003e\n  \u003cli\u003eAluminium reservoir resists corrosion and is lightweight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my vehicle and how do I choose hose size?\u003c\/h3\u003e\n\u003cp\u003eThe EVIL ENERGY catch can is universal, not vehicle-specific, so you must confirm hose inner diameter and available mounting space before ordering. Measure the factory PCV hose inner diameter and choose fittings that match the kit’s M16*1.5 inlet\/outlet thread and the supplied 3\/8\" ID hose.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupplied hose: 5 ft (1.5 m) length, 3\/8\" ID, 5\/8\" OD\u003c\/li\u003e\n  \u003cli\u003ePorts use M16*1.5 threaded fittings for secure connection\u003c\/li\u003e\n  \u003cli\u003eCheck for clearance and bracket placement before installation\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended if unsure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShould I run the catch can with a breather filter or inline with the PCV?\u003c\/h3\u003e\n\u003cp\u003eUse the breather filter when installing the can as a vent for pre-PCV systems or where venting to atmosphere is required. For sealed PCV systems, install the can inline between the PCV hoses without the breather so it acts as a sealed reservoir returning cleaner gases to the intake.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWith breather: venting application and pre-PCV cars\u003c\/li\u003e\n  \u003cli\u003eWithout breather: sealed inline can for modern PCV systems\u003c\/li\u003e\n  \u003cli\u003eVersatile configuration depending on engine layout\u003c\/li\u003e\n  \u003cli\u003eFollow local regulations concerning venting to atmosphere\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I maintain the catch can and avoid problems in cold weather?\u003c\/h3\u003e\n\u003cp\u003eCondensed moisture can freeze in very low temperatures, so empty and inspect the can regularly during winter and clean weekly if frequent cold starts occur. If freezing is a concern, temporarily reinstall the original PCV hose until conditions improve to avoid blockages.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect and drain the 300ml reservoir weekly in cold climates\u003c\/li\u003e\n  \u003cli\u003eClean the baffle and replace steel wool as needed\u003c\/li\u003e\n  \u003cli\u003eReinstall factory PCV hose if freezing risk exists\u003c\/li\u003e\n  \u003cli\u003eRoutine checks help prevent clogs and maintain ventilation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This EVIL ENERGY 300ml 2-port baffled catch can is aimed at enthusiasts and technicians who want a serviceable, compact oil separation solution for street and light-performance engines. It’s suitable for users who can measure their PCV plumbing, confirm hose and fitting compatibility, and either perform basic installation themselves or have it installed by a mechanic. If you need a universal, easy-to-inspect reservoir with a durable NBR hose and flexible venting options, this kit is designed to meet those needs while offering after-sales support for quality issues.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the EVIL ENERGY catch can universal?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s a universal 300ml two-port design, but verify your hose inner diameter and mounting space before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I empty the catch can?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check and drain it regularly; weekly inspections are recommended in cold climates to prevent moisture freeze-ups.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":55168659521879,"sku":"B0DPPD529G","price":72.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/evil-energy-catch-can-front-view.jpg?v=1790410998","url":"https:\/\/britishgarage.co.uk\/products\/evil-energy-300ml-universal-2-port-baffled-oil-catch-can-kit-aluminum-reservoir-removable-baffle","provider":"British Garage","version":"1.0","type":"link"}