{"product_id":"fill-rite-10-micron-hydrosorb-fuel-filter-kit-18-gpm-3-4-ports-water-detecting-head","title":"Fill-Rite 10-Micron Hydrosorb Fuel Filter Kit — 18 GPM, 3\/4\" Ports, Water-Detecting Head","description":"\u003cp\u003e\u003cstrong\u003eThe Fill-Rite 1210KTF7019 is a complete 10-micron Hydrosorb fuel transfer filter kit with head and fittings, built to strain particulates, detect water and support up to 18 GPM (68 LPM) flow.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis ready-to-install kit pairs the F1810HM0 Hydrosorb element with the 1200KTG9075 filter head, and includes the common fittings needed to add reliable contamination control to fuel transfer systems. It’s designed for operators who move diesel, gasoline or biodiesel blends and need a compact, serviceable solution that both captures fine particles and signals when excess water is present in the fuel.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit stop contaminants during fuel transfer?\u003c\/h3\u003e\n\u003cp\u003eThe Hydrosorb element filters down to 10 microns to remove dirt, rust and other solid debris before fuel reaches pumps or engines. Its construction also helps enforce a detectable restriction when water accumulates, making it easier to know when service is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10-micron filtration rating for fine particulate removal\u003c\/li\u003e\n  \u003cli\u003eHydrosorb media engineered to interact with free water\u003c\/li\u003e\n  \u003cli\u003eDurable filter head with 1\"-12 UNF thread for secure element fit\u003c\/li\u003e\n  \u003cli\u003eIncluded 3\/4\" ports and fittings simplify plumbing into existing lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and plumbing fittings come with the kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with the filter element, the matching filter head and three common 3\/4\" fittings so you can integrate it quickly into most transfer setups. The included elbow and pipe nipples reduce the need to source additional parts for standard pump-to-hose connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1200KTG9075 filter head with 3\/4\" fuel ports\u003c\/li\u003e\n  \u003cli\u003eF1810HM0 Hydrosorb 10-micron element with 1\"-12 UNF threads\u003c\/li\u003e\n  \u003cli\u003e0.75\" elbow, 0.75\" x 7.25\" nipple, and 0.75\" x 2.5\" nipple included\u003c\/li\u003e\n  \u003cli\u003eDesigned for quick hand-tighten installation and routine servicing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter kit handle my flow rate and equipment needs?\u003c\/h3\u003e\n\u003cp\u003eThe Fill-Rite 1210KTF7019 is rated for up to 18 GPM (68 LPM) in continuous fuel transfer applications, making it suitable for many commercial and fleet fueling operations. It’s intended to protect pumps, meters and engines by capturing particulates and revealing water presence before contaminants cause damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum recommended flow: 18 GPM (68 LPM)\u003c\/li\u003e\n  \u003cli\u003eSuitable for fuel transfer systems and fuel dispensing equipment\u003c\/li\u003e\n  \u003cli\u003eHelps reduce wear on downstream components like pumps and meters\u003c\/li\u003e\n  \u003cli\u003eReplacement every six months recommended by Fill-Rite for best protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I maintain and service the Hydrosorb filter element?\u003c\/h3\u003e\n\u003cp\u003eServicing is simple: shut off flow, relieve pressure, unscrew the element from the head and replace it with a new F1810HM0 cartridge. Fill-Rite advises replacing the element approximately every six months, or sooner if the element shows restriction or water indication.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off transfer pump and isolate the filter before servicing\u003c\/li\u003e\n  \u003cli\u003eUnscrew used element from 1\"-12 UNF threaded head and discard\u003c\/li\u003e\n  \u003cli\u003eInstall new F1810HM0 element hand-tight and resume operation\u003c\/li\u003e\n  \u003cli\u003eInspect for signs of water restriction and change earlier if observed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit for? The Fill-Rite 1210KTF7019 is aimed at fleet managers, contractors and facility operators who need a compact, dependable filter assembly to protect fuel-handling equipment. It suits mobile fuel trucks, shop transfer systems and fixed dispensers where 3\/4\" plumbing is common and where both particulate removal and water detection are priorities. If you require a straightforward, serviceable filter head plus element and basic fittings, this kit provides the core components to get clean, monitored fuel flow into your pumps and engines.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What flow rate can this filter kit support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit supports up to 18 GPM (68 LPM), suitable for many commercial fuel transfer applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the filter element?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fill-Rite recommends changing the element every six months, or sooner if water restriction appears.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fill-Rite","offers":[{"title":"Default Title","offer_id":55169374585175,"sku":"B003D7KF5M","price":91.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/fill-rite-filter-kit-front-packaging.jpg?v=1790422964","url":"https:\/\/britishgarage.co.uk\/products\/fill-rite-10-micron-hydrosorb-fuel-filter-kit-18-gpm-3-4-ports-water-detecting-head","provider":"British Garage","version":"1.0","type":"link"}