{"product_id":"ibrightstar-1157-bay15d-led-strobe-to-solid-brake-bulbs-brilliant-red-9-30v-dual-flash-safety","title":"iBrightstar 1157\/BAY15D LED Strobe-to-Solid Brake Bulbs — Brilliant Red, 9–30V, Dual-Flash Safety","description":"\u003cp\u003e\u003cstrong\u003eiBrightstar 9-30V strobe brake LED bulbs flash three times when braking then switch to a solid brilliant red to improve rear visibility and alert following drivers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese iBrightstar replacement bulbs are engineered for vehicles that use 1157\/BAY15D-style dual-filament sockets and need a brighter, attention-getting brake light. Using a combination of 54 SMD 3014 chips and 3 SMD 3030 chips per bulb, they deliver striking red output while drawing minimal power across a wide 9–30V range, making them suitable for 12V cars and 24V trucks or RVs. The bulbs start with a quick strobe flash pattern during initial braking to capture attention, then revert to a steady brake beam that meets practical road-use expectations.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the strobe-to-solid function enhance braking safety?\u003c\/h3\u003e\n\u003cp\u003eThe bulb begins with a rapid flash sequence to make initial braking more noticeable, then holds a constant red glow for sustained braking visibility. This two-stage behavior reduces the chance that drivers behind will miss your stop signal, especially in heavy traffic or low-visibility conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree quick flashes at the start of brake application to grab attention\u003c\/li\u003e\n  \u003cli\u003eSwitches to a consistent solid brake light for ongoing visibility\u003c\/li\u003e\n  \u003cli\u003eDesigned to be more conspicuous than steady-only bulbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these LEDs fit my vehicle and work with its electrical system?\u003c\/h3\u003e\n\u003cp\u003eiBrightstar bulbs use the common 1157\/BAY15D base and fit many equivalent socket numbers such as 2057, 2357 and 7528; always compare your current bulb number before ordering. They operate over 9–30V, so they work in both 12V and 24V systems, but some vehicles may need an additional load resistor or an anti-hyperflash relay due to the lower wattage of LEDs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible bases: 1157, BAY15D, 2057, 2357, 7528 and similar\u003c\/li\u003e\n  \u003cli\u003eOperating voltage: 9–30V for 12V and 24V vehicles\u003c\/li\u003e\n  \u003cli\u003eMay require load resistor or relay to prevent hyper-flash or dashboard errors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability can I expect from these bulbs?\u003c\/h3\u003e\n\u003cp\u003eEach bulb combines efficient SMD LED chips with an aluminum housing and projector lens to maximize light output and heat dissipation. The built-in constant-current driver stabilizes brightness and contributes to long service life while consuming roughly 3W per bulb for low power draw.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLight sources: 54 SMD 3014 + 3 SMD 3030 chips per bulb for high output\u003c\/li\u003e\n  \u003cli\u003ePower consumption: about 3W per bulb for energy efficiency\u003c\/li\u003e\n  \u003cli\u003eDurability: aluminum body, projector lens, and expected long lifespan\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what should I check first?\u003c\/h3\u003e\n\u003cp\u003eInstallation is plug-and-play for compatible dual-contact sockets, and the bulbs are non-polarity so orientation usually isn’t an issue. Before installing, confirm your original bulb’s base number to ensure compatibility and check whether your vehicle requires extra load correction for LED retrofits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm existing bulb number (e.g., 1157\/BAY15D) prior to purchase\u003c\/li\u003e\n  \u003cli\u003eNon-polarity design eases installation in most sockets\u003c\/li\u003e\n  \u003cli\u003eKeep a load resistor or relay handy if you encounter hyper-flashing or faults\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers, fleet operators, RV owners and truckers who want a brighter, more attention-grabbing brake light without extensive rewiring will benefit from iBrightstar’s strobe-to-solid LED replacement. It’s suited for anyone using vehicles with dual-filament 1157\/BAY15D-style sockets who wants improved rearward visibility, reduced power draw, and long-lasting LED performance. Remember to confirm your bulb base and consider load correction accessories if your vehicle’s electrical system flags lower-wattage LEDs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these bulbs fit my 1157 socket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they fit 1157\/BAY15D and equivalent numbers—confirm your original bulb number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need extra parts to stop hyper-flashing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Possibly—many vehicles require a load resistor or LED-compatible flasher relay to prevent hyper-flash or error codes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iBrightstar","offers":[{"title":"Default Title","offer_id":55161074352471,"sku":"B07LG2DWC3","price":31.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/ibrightstar-front-view-packaged-bulbs.jpg?v=1790321949","url":"https:\/\/britishgarage.co.uk\/products\/ibrightstar-1157-bay15d-led-strobe-to-solid-brake-bulbs-brilliant-red-9-30v-dual-flash-safety","provider":"British Garage","version":"1.0","type":"link"}