{"product_id":"juta-obd2-to-db25-main-cable-for-innova-scanners-5-1-ft-155-cm-direct-fit-replacement-for-models-3100-5610-stable-data-trans","title":"JUTA OBD2 to DB25 Main Cable for INNOVA Scanners — 5.1 ft (155 cm), Direct-Fit Replacement for Models 3100–5610, Stable Data Trans","description":"\u003cp\u003e\u003cstrong\u003eJUTA main cable converts an OBD2 16-pin male to a 25-pin male DB25 connector for INNOVA scanners in a durable 5.1ft (155cm) plug-and-play assembly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement main cable is designed as a direct-fit accessory for a range of INNOVA handheld diagnostic tools, including models 3100, 3110, 3120, 3130, 3130C, 3140, 3150, 3160, 31703, 31603, 31403 and 5610 DB25 scanners. Built to restore reliable communication between vehicle OBD-II ports and your INNOVA scanner, the cable focuses on stable data transfer, durable construction and easy setup so you can resume fault reading and troubleshooting without extra adapters.\u003c\/p\u003e\n\n\u003ch3\u003eWill this cable work with my INNOVA scanner model?\u003c\/h3\u003e\n\u003cp\u003eYes — this JUTA cable is tailored to replace the DB25-to-OBD2 input found on a number of INNOVA models. It mirrors the factory pin layout and connector types for direct compatibility, avoiding custom wiring or modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with listed INNOVA models: 3100–31703, 31603, 31403, 5610 DB25 scanners.\u003c\/li\u003e\n  \u003cli\u003eOne end: standard 16-pin OBD2 male plug for vehicle ports.\u003c\/li\u003e\n  \u003cli\u003eOther end: 25-pin male DB25 connector built for INNOVA scanner sockets.\u003c\/li\u003e\n  \u003cli\u003eLength: 5.1 ft (155 cm) to reach engine bays and under-dash ports comfortably.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable is the data transmission and build quality?\u003c\/h3\u003e\n\u003cp\u003eThe cable emphasizes fast, stable signal transfer and resistance to electrical interference so diagnostic readings remain accurate. JUTA uses insulated, environmentally friendly materials and reinforced connector housings to extend service life under routine workshop use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-insulation jacket reduces signal degradation and interference.\u003c\/li\u003e\n  \u003cli\u003eDurable connector shells resist repeated plug\/unplug cycles.\u003c\/li\u003e\n  \u003cli\u003eStable transmission suited for live data, trouble code reading, and clearing procedures.\u003c\/li\u003e\n  \u003cli\u003eEnvironmental materials for safer disposal and longer-term use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and everyday use?\u003c\/h3\u003e\n\u003cp\u003eInstallation is plug-and-play: connect the 16-pin side to the vehicle OBD-II port and the DB25 male to the scanner — no tools or wiring required. The 5.1 ft length gives you enough slack to position the scanner on the dashboard or seat during testing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play connectors match INNOVA scanner sockets without adapters.\u003c\/li\u003e\n  \u003cli\u003e5.1 ft cable length for flexible scanner placement in most vehicle interiors.\u003c\/li\u003e\n  \u003cli\u003eStrong anti-interference ability ensures consistent readings while the vehicle runs.\u003c\/li\u003e\n  \u003cli\u003eOne-piece cable reduces points of failure compared with multi-segment adapters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect from packaging and support?\u003c\/h3\u003e\n\u003cp\u003eThe product ships as a single main cable packaged for protection and straightforward unboxing. JUTA provides customer support for product questions or fit inquiries and aims to respond within 12 hours of contact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackaging contains 1 x JUTA main cable compatible with specified INNOVA scanners.\u003c\/li\u003e\n  \u003cli\u003eQuick-start ready: no additional parts required to begin diagnostics.\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment or compatibility questions.\u003c\/li\u003e\n  \u003cli\u003eSimple returns and warranty handling through the seller channel (refer to store policy).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This JUTA 16-pin to DB25 main cable is for vehicle owners, DIY mechanics and professional technicians who use legacy INNOVA DB25-format diagnostic scanners and need a reliable replacement or spare lead. It's ideal if your original cable is worn, intermittent, or damaged and you want a plug-and-play, durable alternative that preserves accurate scanner-to-vehicle communication.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this cable plug-and-play with my INNOVA scanner?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The cable uses standard 16-pin OBD2 and 25-pin DB25 male connectors built to fit listed INNOVA models without modification.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the cable length and is it durable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The cable is 5.1 ft (155 cm) long and made with high-insulation, durable materials to resist wear and signal interference.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JUTA","offers":[{"title":"Default Title","offer_id":55167391105367,"sku":"B0G3NFTHQW","price":40.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/juta-main-cable-front-view-innova-db25-connector.jpg?v=1790385571","url":"https:\/\/britishgarage.co.uk\/products\/juta-obd2-to-db25-main-cable-for-innova-scanners-5-1-ft-155-cm-direct-fit-replacement-for-models-3100-5610-stable-data-trans","provider":"British Garage","version":"1.0","type":"link"}