{"product_id":"pangda-20-ft-fuel-line-hose-3-8-in-nbr-return-line-for-small-engines-300-psi","title":"Pangda 20 ft Fuel Line Hose 3\/8 in NBR Return-Line for Small Engines, 300 PSI","description":"\u003cp\u003e\u003cstrong\u003ePangda's 20 ft 3\/8\" fuel line hose is a nitrile rubber (NBR) fuel-supply tube designed for return lines on small engines, offering durable, temperature-resistant fuel transfer when paired with appropriate fittings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis single-piece fuel hose from Pangda is built for replacement and repair on a variety of fuel systems where return-line tubing is required. It's engineered with a 3\/8 inch (≈10 mm) inner bore and roughly 17 mm outer diameter, supplied as a 20-foot (≈6 m) coil so you can cut to fit. The NBR compound balances fuel resistance and flexibility for routine service environments; use it only on compatible low-pressure return circuits and with external primer bulbs or clamps as needed.\u003c\/p\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and pressure ratings of this hose?\u003c\/h3\u003e\n\u003cp\u003eThe hose measures about 3\/8\" (10 mm) inside and approximately 2\/3\" (17 mm) outside, with a total supplied length close to 20 ft (6 m). It is rated for a working pressure around 300 PSI and has a burst pressure near 1,160 PSI—suitable for many return-line applications but not for fuel injection systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: ~3\/8 inch \/ 10 mm\u003c\/li\u003e\n  \u003cli\u003eOuter diameter: ~2\/3 inch \/ 17 mm\u003c\/li\u003e\n  \u003cli\u003eLength: ~20 ft \/ 6 m (single piece)\u003c\/li\u003e\n  \u003cli\u003eWorking pressure: ~300 PSI; burst: ~1,160 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich materials and operating temperatures can I expect from this tubing?\u003c\/h3\u003e\n\u003cp\u003eThe Pangda hose is manufactured from NBR (nitrile butadiene rubber), a common fuel-resistant elastomer for fuel and oil exposure. It remains usable across a wide thermal span, giving flexibility in cold starts and elevated-heat conditions, but always confirm system compatibility before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: NBR rubber for fuel resistance and durability\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range: -40°C to 120°C\u003c\/li\u003e\n  \u003cli\u003eGood abrasion resistance for routine mechanical handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this fuel hose be used on my vehicle or equipment?\u003c\/h3\u003e\n\u003cp\u003eThis hose is suitable for return fuel lines on many small engines and fuel systems—examples include RC helicopters, motorcycles, boats, lawn equipment, and diesel truck return circuits. It must not be used for high-pressure fuel injection lines; check your system's pressure and the recommended line type before replacing hoses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended for: return oil\/fuel lines on small engines and auxiliary systems\u003c\/li\u003e\n  \u003cli\u003eNot for: engine fuel-injection systems or other high-pressure feed lines\u003c\/li\u003e\n  \u003cli\u003eRequires: appropriate fittings, clamps, and external primer bulb when needed (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain this Pangda fuel line?\u003c\/h3\u003e\n\u003cp\u003eCut the hose to the needed length and secure it with compatible clamps or barbed fittings to prevent leaks. Inspect for cracking, swelling, or hardening over time—replace when deterioration appears. Keep fuel-contact seals clean and avoid long-term exposure to strong solvents beyond normal fuel contact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse proper clamps or barbed connectors for leak-free joins\u003c\/li\u003e\n  \u003cli\u003eReplace if rubber shows wear, stiffening, or soft spots\u003c\/li\u003e\n  \u003cli\u003eStore coil away from direct sunlight and high heat when not installed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Pangda 20 ft 3\/8\" fuel line is intended for hobbyists, mechanics, boaters, and fleet or equipment owners who need a long, flexible replacement hose for return fuel systems on small engines. It suits anyone needing durable, fuel-resistant tubing with broad temperature tolerance—provided the system operates within the hose's pressure and application limits.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose safe for fuel injection systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This Pangda hose is meant for return lines only and is not rated for high-pressure injection systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I cut the 20 ft length to size?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The hose is supplied as one 20 ft piece and can be trimmed; use proper clamps and fittings after cutting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pangda","offers":[{"title":"Default Title","offer_id":55166368121175,"sku":"B0C89M8WQV","price":54.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/pangda-fuel-hose-front-view_9938a7b0-ec10-4bd7-aada-080355621721.jpg?v=1790367250","url":"https:\/\/britishgarage.co.uk\/products\/pangda-20-ft-fuel-line-hose-3-8-in-nbr-return-line-for-small-engines-300-psi","provider":"British Garage","version":"1.0","type":"link"}