{"product_id":"partsam-12v-led-submersible-trailer-lights-pair-rectangular-low-profile-ip68-waterproof-dot-compliant","title":"Partsam 12V LED Submersible Trailer Lights Pair — Rectangular Low-Profile, IP68 Waterproof, DOT-Compliant","description":"\u003cp\u003e\u003cstrong\u003ePartsam 12V rectangular low-profile LED trailer lights are a fully sealed, submersible combination kit that provides stop, tail, turn, license, marker and reflex functions for trailers, boats and trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pair of Partsam lights is built for wet and rough conditions: welded housings, IP68 submersion rating and zinc-plated mounting hardware make them suitable for marine towing and heavy-duty road use. Each lamp is pre-wired and optimized to replace conventional rectangular tail lights on trailers wider than 80 inches when mounted correctly, with one unit including a built-in license plate lamp.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lights handle water and vibration?\u003c\/h3\u003e\n\u003cp\u003ePartsam designed the lights specifically to resist water intrusion and survive constant vibration. The lenses are welded to the housing, the circuit board is sealed, and an intentional center chip and drain path channel water away from electronics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP68-rated for continuous submersion and harsh marine exposure\u003c\/li\u003e\n  \u003cli\u003eWelded, screwless lens-to-housing joint prevents leaks\u003c\/li\u003e\n  \u003cli\u003eInternal drain\/chip design routes water away from the LED board\u003c\/li\u003e\n  \u003cli\u003eZinc-plated hardware reduces corrosion in saltwater environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat lighting functions does each unit provide?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies multiple legally useful lighting roles in one compact rectangular housing. When installed as intended, the pair covers stop, brake, turn, running, side marker, rear clearance and rear reflex duties, plus a built-in license plate light on the driver's-side lamp.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDriver-side lamp: 22 diodes including 4 for the license plate illumination\u003c\/li\u003e\n  \u003cli\u003ePassenger-side lamp: 18 diodes for standard tail functions\u003c\/li\u003e\n  \u003cli\u003eCombination output reduces the need for separate fixtures\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet DOT visibility and configuration expectations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what hardware is included?\u003c\/h3\u003e\n\u003cp\u003eEach light is a low-profile rectangular unit sized to match common trailer mounts and comes with corrosion-resistant mounting bolts and screws. The package contains reflective stickers too, but note that a wire harness and bracket are not provided, so some vehicles may require an adapter or basic wiring work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle lamp dimensions: 8.42\" L × 3.27\" H × 2.87\" W for compact fit\u003c\/li\u003e\n  \u003cli\u003eIncluded: 2 lights, zinc-plated mounting screws\/bolts and 4 reflective stickers\u003c\/li\u003e\n  \u003cli\u003eNot included: wire harness and mounting brackets—installers should supply as needed\u003c\/li\u003e\n  \u003cli\u003eHardware suited for both under-80\" and over-80\" trailers when mounted properly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these lights DOT-compliant and suitable for road or marine use?\u003c\/h3\u003e\n\u003cp\u003eYes — Partsam builds these lights to comply with DOT standards while also meeting IP68 waterproofing for marine environments. They are meant to function reliably on trailers, boats, campers, utility vehicles and similar towed equipment without compromising safety or legal visibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDOT-compliant design for on-road legality\u003c\/li\u003e\n  \u003cli\u003eIP68 submersible rating for consistent marine performance\u003c\/li\u003e\n  \u003cli\u003eDurable components chosen for conductivity and long life\u003c\/li\u003e\n  \u003cli\u003eSealed circuit board to prevent shorting from moisture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These Partsam rectangular LED lights are targeted at owners and operators of boat trailers, utility trailers, RVs, trucks and other towed equipment who need a compact, durable, multi-function tail light solution that resists saltwater and harsh road conditions. They suit do-it-yourself installers and professional shops replacing aging lenses with a sealed, DOT-compliant kit — ideal when a low-profile, waterproof fixture and an integrated license lamp are required for safer towing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lights fully waterproof for boat trailers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are IP68-rated and welded to resist submersion, with internal drains to protect the circuit board.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include wiring and mounting brackets?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The package includes lights, zinc-plated screws\/bolts and reflectors; wire harnesses and brackets must be supplied separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partsam","offers":[{"title":"Default Title","offer_id":55167862735191,"sku":"B01M081XCU","price":40.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/partsam-front-view-rectangular-trailer-light.jpg?v=1790394029","url":"https:\/\/britishgarage.co.uk\/products\/partsam-12v-led-submersible-trailer-lights-pair-rectangular-low-profile-ip68-waterproof-dot-compliant","provider":"British Garage","version":"1.0","type":"link"}