{"product_id":"rapid-tac-vinyl-wrap-application-fluid-32oz-spray-kit-includes-squeegee-felt-tips-for-smooth-wet-apply","title":"Rapid Tac Vinyl Wrap Application Fluid 32oz Spray Kit — Includes Squeegee, Felt Tips for Smooth Wet-Apply","description":"\u003cp\u003e\u003cstrong\u003eRapidTac Vinyl Wrap Application Fluid is a ready-to-use 32oz spray that lets you wet-apply, reposition, and squeegee vinyl smoothly for faster, cleaner installations.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re doing vehicle wraps, decals, or interior signage, this spray solution is formulated to give installers more working time and better bubble control. The kit arrives with a 32oz spray bottle of RapidTac fluid plus a blue squeegee, yellow detailer, and two felt tips so you have the basic tools to lay film, remove trapped fluid and finalize edges. Follow the included steps—clean, wet-apply, squeegee, wait about 90 seconds, and remove transfer tape—to get consistent adhesion and reduced rework.\u003c\/p\u003e\n\n\u003ch3\u003eHow does RapidTac make positioning vinyl easier?\u003c\/h3\u003e\n\n\u003cp\u003eApplying the fluid to the surface creates a temporary lubricated layer under the film, enabling you to slide and align graphics before they set. This reduces stress on the vinyl and lets you correct placement without lifting adhesive or stretching the film.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSpray the smooth substrate and the adhesive side if needed to allow sliding.\u003c\/li\u003e\n  \u003cli\u003ePlace the decal onto the wet surface and adjust position without tearing or stretching.\u003c\/li\u003e\n  \u003cli\u003eSqueegee from the center outward to push out fluid and air pockets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat steps produce a bubble-free finish with this kit?\u003c\/h3\u003e\n\n\u003cp\u003eRapidTac’s method focuses on pushing liquid and air out from under the film and then allowing a short dwell time for the adhesive to grab. Proper squeegeeing and saturating the transfer tape before removal help eliminate bubbles and reduce edge lifting.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eClean the surface thoroughly with RapidTac and a towel before application.\u003c\/li\u003e\n  \u003cli\u003eSqueegee firmly from the middle toward edges in all directions to expel bubbles.\u003c\/li\u003e\n  \u003cli\u003eWait roughly 90 seconds, wet the transfer tape, and peel slowly to minimize bubbles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill RapidTac help the wrap bond and last longer?\u003c\/h3\u003e\n\n\u003cp\u003eRapidTac is designed to assist adhesion by enabling correct placement and reducing trapped fluid that can prevent full contact. After squeegeeing and the brief wait, the film bonds to smooth surfaces more consistently, which helps reduce edge lifting when applied properly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAllows vinyl to properly seat against the substrate once fluid is removed and the adhesive activates.\u003c\/li\u003e\n  \u003cli\u003eHelps ensure full contact across the surface for stronger, more uniform adhesion.\u003c\/li\u003e\n  \u003cli\u003eUse the included tools to finish edges and remove excess solution to speed curing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools come with the 32oz RapidTac kit and why are they useful?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit includes a blue squeegee for smooth pressure distribution, a yellow detailer for tight spots, and two felt tips to protect edges and delicate finishes. Together these tools let you press out fluid, protect paint or film edges, and complete fine trimming without scratching the substrate.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBlue squeegee: broad, firm pressure to remove liquid and air pockets.\u003c\/li\u003e\n  \u003cli\u003eYellow detailer: reaches corners and complex contours for clean finishes.\u003c\/li\u003e\n  \u003cli\u003eTwo felt tips: cushion contact on sensitive edges and prevent marring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: RapidTac’s 32oz application fluid and tool bundle is intended for professional wrap installers, sign shops, and DIY enthusiasts who install vinyl on smooth substrates and want better control during placement and finishing. It’s useful for vehicle wraps, window graphics, decals, and interior signage where repositioning and bubble-free results are important. Follow the product instructions—clean with RapidTac, spray, squeegee, wait ~90 seconds, wet-transfer-tape, then remove and wipe—to get consistent, reliable results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use RapidTac on painted surfaces?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—use on smooth, clean painted surfaces. Clean with RapidTac first, spray, apply film, squeegee, then wait about 90 seconds before removing transfer tape.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long should I wait before the wrap bonds?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: After squeegeeing, wait roughly 90 seconds for the adhesive to set before wetting and removing the transfer tape.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Rapid Tac","offers":[{"title":"Default Title","offer_id":55167879381335,"sku":"B078YCM4KJ","price":60.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/rapidtac-front-packaging-spray-bottle-and-tools.jpg?v=1790394669","url":"https:\/\/britishgarage.co.uk\/products\/rapid-tac-vinyl-wrap-application-fluid-32oz-spray-kit-includes-squeegee-felt-tips-for-smooth-wet-apply","provider":"British Garage","version":"1.0","type":"link"}