{"product_id":"spta-clay-bar-kit-3-pack-300g-with-16oz-synthetic-luber-medium-duty-detailing-clay-for-paint-glass-chrome","title":"SPTA Clay Bar Kit 3-Pack 300g with 16oz Synthetic Luber — Medium Duty Detailing Clay for Paint, Glass \u0026 Chrome","description":"\u003cp\u003e\u003cstrong\u003eSPTA Clay Bar and Luber Kit is a three-piece 300g medium-duty detailing clay set bundled with a 16oz synthetic lubricant to safely remove surface contaminants and leave automotive paint smooth to the touch.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle’s finish feels rough despite regular washing, embedded fallout, rail dust, and industrial grime may be to blame. The SPTA kit gives you a tactile, non-abrasive way to pull contaminants from clearcoat, glass, chrome and painted trim so polishes and waxes work better and look clearer. This kit pairs pliable medium-strength clay bars with a synthetic lubrication spray formulated to reduce friction and protect the surface while you glide the clay over panels.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use these clay bars without damaging paint?\u003c\/h3\u003e\n\n\u003cp\u003eStart with a clean vehicle and work in small sections. Spray the synthetic luber generously over a panel, knead a clay bar into a flat tab, and glide it gently back and forth until the surface feels smooth; avoid heavy pressure and re-fold the clay frequently to expose a clean face.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWash and dry the car before claying to remove loose dirt.\u003c\/li\u003e\n  \u003cli\u003eSpray lubricant liberally to prevent sticking and reduce abrasion.\u003c\/li\u003e\n  \u003cli\u003eWork 2x2-foot sections and keep the clay moving, not pressing hard.\u003c\/li\u003e\n  \u003cli\u003eRefold or replace clay when it picks up visible debris.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces can I safely use the SPTA clay bar kit on?\u003c\/h3\u003e\n\n\u003cp\u003eThese medium-duty clay bars are formulated for common exterior surfaces: painted clearcoat, glass, chrome, and smooth plastic trim. They remove bonded contaminants like overspray, tar, brake dust, and oxidation residues without aggressive polishing when used with the included luber.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eClearcoat and single-stage paint with caution on very soft finishes.\u003c\/li\u003e\n  \u003cli\u003eAutomotive glass for a slick, contaminant-free surface before polishing.\u003c\/li\u003e\n  \u003cli\u003eChrome and metal trim to restore smoothness before protection steps.\u003c\/li\u003e\n  \u003cli\u003eRV and bus panels—work in small areas to manage clay wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does each clay bar last and how should I store them?\u003c\/h3\u003e\n\n\u003cp\u003eLongevity depends on how contaminated the vehicle is and how often you refold the clay to expose clean material. Each 100g bar in this 300g pack can be used multiple times if kept clean, but replace bars when embedded particles become too dense to fold out.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAfter each use, rinse visible debris and allow the clay to air dry slightly—do not bake or microwave.\u003c\/li\u003e\n  \u003cli\u003eStore wrapped in the original plastic or a sealed bag to prevent dust pickup.\u003c\/li\u003e\n  \u003cli\u003eDiscard if large embedded grit becomes unavoidable to avoid marring paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the synthetic luber do and why is it included?\u003c\/h3\u003e\n\n\u003cp\u003eThe 16oz synthetic lubricant reduces friction between the clay and surface, minimizing the chance of marring and helping the clay glide smoothly over contaminants. It also provides temporary slickness so you can detect when a panel is fully decontaminated by feel rather than sight alone.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProvides consistent glide to protect clearcoat during claying.\u003c\/li\u003e\n  \u003cli\u003eMakes contamination easier to identify by feel and reduces drag.\u003c\/li\u003e\n  \u003cli\u003eSafe to rinse off and follow with polish, sealant, or wax.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The SPTA Clay Bar and Luber Kit suits DIY detailers, weekend enthusiasts, and professional cleaners who need an effective, budget-friendly contaminant removal system. It’s ideal for anyone prepping surfaces for polishing or protection on cars, trucks, RVs, buses, motorcycles, and glass—especially when you want a tactile method to restore smoothness without aggressive abrasives.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these clay bars on ceramic-coated paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can clay ceramic-coated paint, but test a small area first; use light pressure and plenty of lubricant to avoid compromising the coating.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I clay my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Clay only when the finish feels rough after washing—typically once or twice a year for most daily-driven vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SPTA","offers":[{"title":"Default Title","offer_id":55162515849559,"sku":"B09Z6F8F92","price":45.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/spta-clay-bar-front-packaging.jpg?v=1790336939","url":"https:\/\/britishgarage.co.uk\/products\/spta-clay-bar-kit-3-pack-300g-with-16oz-synthetic-luber-medium-duty-detailing-clay-for-paint-glass-chrome","provider":"British Garage","version":"1.0","type":"link"}