{"product_id":"spta-t120-heavy-cut-foam-polishing-pads-3-pack-6-5-face-for-6-backing-plate-aggressive-cut-grooved-cooling","title":"SPTA T120 Heavy-Cut Foam Polishing Pads 3-Pack 6.5\" Face for 6\" Backing Plate — Aggressive Cut, Grooved Cooling","description":"\u003cp\u003e\u003cstrong\u003eSPTA T120 heavy-cut 6.5\" foam polishing pads are aggressive, grooved polishing sponges designed to remove sanding marks, deep scratches, oxidation and orange peel when used with a rotary or dual-action polisher.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese 3-pack 6.5-inch (face) pads fit a 6-inch (150mm) backing plate and combine a high-density polyurethane foam with cooling grooves and a Velcro-backed hook face for quick changes. Built for compounding, polishing and finishing, the T120 pads balance cut power and heat-management so you can work through heavy paint defects without glazing or burning the surface if used correctly.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these pads tackle heavy sanding marks and deep scratches?\u003c\/h3\u003e\n\u003cp\u003eThe T120 heavy-cut foam uses a denser cell structure and an open groove pattern to carry compound and abrasives while maintaining contact with the paint. That density provides mechanical aggression to break down 1200\/1500 grit sanding marks and visible defects faster than softer finishing pads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-cut foam texture for faster material removal\u003c\/li\u003e\n  \u003cli\u003eGrooved surface stores polish and controls heat\u003c\/li\u003e\n  \u003cli\u003eOptimized for rotary and dual-action polishers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the pad help reduce heat and polish distribution issues?\u003c\/h3\u003e\n\u003cp\u003eThe pad’s radial grooves channel excess compound and enable air flow between the foam and paint, which lowers surface temperature during extended passes. Better ventilation reduces glazing and prevents the pad backing from overheating, extending working time and protecting delicate finishes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGroove design improves airflow and heat dissipation\u003c\/li\u003e\n  \u003cli\u003eEven compound distribution for consistent cutting action\u003c\/li\u003e\n  \u003cli\u003eVelcro backing helps mitigate slippage and heat buildup at the mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use and maintain these polishing pads for best results?\u003c\/h3\u003e\n\u003cp\u003eUse a compatible heavy-cut compound and start at low speed to spread product, then increase speed to work the defect. Clean the pad regularly during use to remove abrasive buildup and wash with mild soap and water after each job; avoid solvents or alkaline cleaners which can damage foam.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAttach to a 6\" (150mm) hook-and-loop backing plate\u003c\/li\u003e\n  \u003cli\u003eClean debris frequently to preserve cutting efficiency\u003c\/li\u003e\n  \u003cli\u003eAir dry and store flat to prolong pad life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces and jobs are these pads suitable for?\u003c\/h3\u003e\n\u003cp\u003eThough built primarily for automotive paint compounding, the pads also work on gelcoat, boat topsides and other painted surfaces where aggressive defect removal is needed. They are suitable for both pros and experienced DIYers who understand polishing techniques and machine control.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemoves sanding marks, oxidation, and heavy swirl marks\u003c\/li\u003e\n  \u003cli\u003eCompatible with paint, gelcoat, and some clear coats when used properly\u003c\/li\u003e\n  \u003cli\u003eNot intended as a final finishing pad — follow with finer pads for gloss\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The SPTA T120 6.5\" heavy-cut pads are aimed at detailers, body shops and car enthusiasts who need a reliable, aggressive pad to correct medium-to-severe paint defects before refinement. If you commonly work with 1200–1500 grit sanded panels, restored older finishes, or prefer a fast-cutting step in your polishing workflow, these pads provide the durability and heat-management features to get the job done. For final gloss and hologram removal, pair them with finer foam or microfiber finishing pads and appropriate polishes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these pads fit a 6-inch backing plate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 6.5\" face diameter is designed to work with standard 6\" (150mm) hook-and-loop backing plates.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these pads on a dual-action polisher?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They work on both rotary and dual-action polishers, though cutting is more aggressive on a rotary.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SPTA","offers":[{"title":"Default Title","offer_id":55164220309847,"sku":"B09S9W5JKG","price":33.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/spta-t120-front-face-pad.jpg?v=1790351543","url":"https:\/\/britishgarage.co.uk\/products\/spta-t120-heavy-cut-foam-polishing-pads-3-pack-6-5-face-for-6-backing-plate-aggressive-cut-grooved-cooling","provider":"British Garage","version":"1.0","type":"link"}