{"product_id":"sturdy-built-replacement-drop-foot-for-trailer-jacks-1-3-4-square-zinc-coated-2-500-lb-capacity","title":"Sturdy Built Replacement Drop Foot for Trailer Jacks 1 3\/4\" Square — Zinc-Coated, 2,500 lb Capacity","description":"\u003cp\u003e\u003cstrong\u003eSturdy Built's 1 3\/4\" square replacement drop foot restores a corroded or damaged trailer jack foot to full function and fits most 2,500 lb capacity square drop-foot jacks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eOver time the exposed lower section of a trailer jack—the drop foot—can rust, bend, or wear away. This zinc-coated replacement part is sized for standard 1 3\/4\" square jack legs rated for up to 2,500 pounds, letting you refresh the working end of your jack without replacing the entire assembly. The finish matches many common zinc-plated jacks and offers improved resistance to corrosion so the foot stays serviceable season after season.\u003c\/p\u003e\n\n\u003ch3\u003eWill this replacement part fit my trailer jack?\u003c\/h3\u003e\n\u003cp\u003eMeasure your jack leg: this drop foot is designed for a 1 3\/4\" square inner section and is compatible with most square drop-foot jacks rated at 2,500 lb. Check for the cotter-pin hole spacing and confirm your jack accepts a removable drop foot before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner dimension: 1 3\/4\" square to slide onto the jack leg\u003c\/li\u003e\n  \u003cli\u003eCapacity match: suits jacks rated around 2,500 lb\u003c\/li\u003e\n  \u003cli\u003eMounting: accommodates a cotter pin (cotter pin not included)\u003c\/li\u003e\n  \u003cli\u003eFinish: zinc coating for visual and corrosion match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant is the zinc coating?\u003c\/h3\u003e\n\u003cp\u003eThe zinc plating slows surface corrosion compared with bare steel and helps the replacement foot maintain appearance and function in outdoor use. It’s intended to match the look and basic protection level of common zinc-plated trailer jacks, though long-term resistance depends on exposure and maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eZinc coating for basic corrosion resistance and improved lifespan\u003c\/li\u003e\n  \u003cli\u003eSuitable for typical road and storage conditions when cleaned and inspected\u003c\/li\u003e\n  \u003cli\u003eNot a stainless steel part—consider additional rust prevention in harsh environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the drop foot and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: slide the replacement foot over the jack leg, align the cotter-pin hole to your jack’s pin position, then secure with a cotter pin. No special tools are required—just remove the damaged foot, slide the new piece on, and insert a new cotter pin.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove old foot from jack leg (may need penetrating oil if corroded)\u003c\/li\u003e\n  \u003cli\u003eSlide replacement onto 1 3\/4\" square leg and align holes\u003c\/li\u003e\n  \u003cli\u003eSecure with appropriate cotter pin (not included)\u003c\/li\u003e\n  \u003cli\u003eQuick visual check for fit and alignment before use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I inspect after replacement and during routine checks?\u003c\/h3\u003e\n\u003cp\u003eAfter installing the new drop foot, ensure the leg slides freely and the cotter pin is snug and properly bent. Periodically inspect for corrosion, deformation, and secure fasteners—replace cotter pins when worn and reapply protective coatings if surface rust appears.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify cotter pin hole alignment and secure pin placement\u003c\/li\u003e\n  \u003cli\u003eCheck for movement or looseness between foot and jack leg\u003c\/li\u003e\n  \u003cli\u003eLook for chips in the zinc coating and touch up or protect if needed\u003c\/li\u003e\n  \u003cli\u003eInspect load-bearing surfaces for wear before each towing trip\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Sturdy Built replacement drop foot is for trailer owners, RV enthusiasts, and maintenance professionals who want a simple, cost-effective way to renew a 2,500 lb-rated square jack without replacing the entire jack. It’s ideal if your existing drop foot is rusted, bent, or missing and you need a like-for-like zinc-plated part that fits 1 3\/4\" square legs and uses a cotter pin for retention.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this foot fit all square trailer jacks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits most 1 3\/4\" square jacks rated about 2,500 lb; confirm cotter-pin hole alignment before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the cotter pin included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the cotter pin is not included; you'll need to supply a compatible pin for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sturdy Built","offers":[{"title":"Default Title","offer_id":55171340566871,"sku":"B0B6CWTSPL","price":73.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/sturdy-built-front-view-drop-foot.jpg?v=1790443261","url":"https:\/\/britishgarage.co.uk\/products\/sturdy-built-replacement-drop-foot-for-trailer-jacks-1-3-4-square-zinc-coated-2-500-lb-capacity","provider":"British Garage","version":"1.0","type":"link"}