{"product_id":"wizards-finish-cut-cutting-compound-32-oz-water-based-scratch-swirl-remover-fast-rinsing","title":"Wizards Finish Cut Cutting Compound 32 oz — Water-Based Scratch \u0026 Swirl Remover, Fast Rinsing","description":"\u003cp\u003e\u003cstrong\u003eWizards Finish Cut is a water-based cutting compound that removes scratches, swirls, and light oxidation to restore deep gloss across paint, clear coat, gelcoat, and fiberglass.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re prepping a show car, refreshing a motorcycle tank, or renovating a boat hull, Finish Cut offers aggressive defect removal without leaving silicone, wax, or crystalline silica residue. The 32 oz formula is engineered to cut heavy defects and then finish cleanly, so follow-up polishing and protective coatings bond properly. It rinses from pads and panels quickly and works across both single-stage and two-stage systems.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Finish Cut remove scratches and swirl marks?\u003c\/h3\u003e\n\u003cp\u003eFinish Cut combines mechanical cutting power with a balanced water-based carrier to abrade and level surface defects, then breaks down to reveal a smoother, higher-gloss finish. It’s designed to lift cobwebbing, overspray, and light surface oxidation in a single pass on many finishes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse with a wool cutting pad at 1400–2200 RPM for initial defect removal.\u003c\/li\u003e\n  \u003cli\u003eFollow with a foam polishing pad at ~1000 RPM to refine gloss and remove haze.\u003c\/li\u003e\n  \u003cli\u003eSafe for single-stage, two-stage, and clear coats when used as directed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this compound on boats, motorcycles, and cars?\u003c\/h3\u003e\n\u003cp\u003eYes — Finish Cut works equally well on automotive paint, gelcoat, and fiberglass. The water-based chemistry avoids staining and etching common with aggressive solvents, making it suitable for painted hulls and gelcoat topsides as long as you test first.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMarine-friendly formula avoids silicone and wax that interfere with sealants.\u003c\/li\u003e\n  \u003cli\u003eRemoves light oxidation and swirl marks on gelcoat and painted surfaces.\u003c\/li\u003e\n  \u003cli\u003eRinses off pads and panels quickly to speed multi-panel jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the recommended buffing workflow for best results?\u003c\/h3\u003e\n\u003cp\u003eStart with a wool pad and the compound at higher RPM to remove heavy defects, then switch to a soft foam pad at lower RPM to refine and deepen gloss. This two-step buffing sequence reduces the risk of re-scratching while producing a show-ready finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInitial cut: wool pad, 1400–2200 RPM, even overlapping passes.\u003c\/li\u003e\n  \u003cli\u003eRefinement: foam pad, ~1000 RPM, lighter pressure to polish out haze.\u003c\/li\u003e\n  \u003cli\u003eFinish check: wipe with a clean microfiber and inspect under good light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill Finish Cut interfere with subsequent waxes, sealants, or coatings?\u003c\/h3\u003e\n\u003cp\u003eNo — because Finish Cut is free of wax, silicone, and crystalline silica, it leaves a clean surface that accepts protective products more reliably than residues left by some older compounds. Always remove any remaining residue with a panel wipe before applying long-term protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWater-based formulation minimizes residue that blocks adhesion.\u003c\/li\u003e\n  \u003cli\u003eCompatible with downstream products when panels are properly cleaned.\u003c\/li\u003e\n  \u003cli\u003eRecommended to follow with a final polish or pre-seal wipe for best bond.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Wizards Finish Cut is aimed at professional detailers, restoration enthusiasts, and hobbyists who need a single product to tackle heavy swirls, minor scratches, overspray, and light oxidation across cars, motorcycles, and boats. If you want a water-based cutting compound that cleans up easily, avoids silicone and wax contamination, and prepares surfaces for sealants or waxes, this 32 oz bottle is a practical workshop staple.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Finish Cut safe on clear coat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. When used with the recommended pads and speeds, Finish Cut works on clear coats without staining; always test an inconspicuous area first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to remove residue before waxing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Wipe panels with a clean microfiber or panel wipe after compounding to ensure proper adhesion of waxes or sealants.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wizards","offers":[{"title":"Default Title","offer_id":55167449301335,"sku":"B005ZH402C","price":61.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/1524\/7191\/files\/wizards-finish-cut-front-label.jpg?v=1790386798","url":"https:\/\/britishgarage.co.uk\/products\/wizards-finish-cut-cutting-compound-32-oz-water-based-scratch-swirl-remover-fast-rinsing","provider":"British Garage","version":"1.0","type":"link"}