A.A Heavy Duty Weld-On Stake Pockets for Trailers & Trucks — Pack of 12, 7‑Gauge Steel, Fits 2x4

A.A Heavy Duty Weld-On 2x4 Steel Stake Pockets are welded mounting sockets that securely hold a standard 2x4 board on trailers and trucks, supplied as a set of 12 for building walls, rails, and tie-down points.

These stake pockets are engineered for heavy-duty utility use on flatbeds, trailers, and truck beds where a removable wooden stake or board is needed. Constructed from 7-gauge steel, each pocket accepts a nominal 2x4 and installs by welding to a metal frame or floor. The pack of 12 gives you enough pieces to build temporary sides, cargo barriers, or multiple tie-down positions without custom fabrication.

How strong and durable are these stake pockets for hauling?

Designed for demanding work environments, the 7-gauge steel construction delivers structural strength and resists deformation under load. They’re intended for welded attachment, which creates a permanent, heavy-duty anchor point when applied correctly by a qualified welder.

• Material: 7 GA (7-gauge) steel for rugged performance
• Weld-on design for fixed, high-strength installation
• Pack size: 12 pockets for multiple mounting locations

Will a standard 2x4 fit these pockets, and what are the exact dimensions?

Yes—each pocket is sized to accept a nominal 2x4 board. The internal dimensions are engineered to allow a typical 2x4 to slide in smoothly while keeping the board stable once seated.

• Height: 3 inches overall to clear the 2x4 end
• Inside depth: 1.5 inches to accommodate the 2x4 thickness
• Inside width: 3.5 inches to hold the nominal width of a 2x4

Where and how are these stake pockets best used on trailers and trucks?

These pockets create removable sidewalls, stake rails, or temporary cargo dividers by holding lumber or metal stakes in place. They're also handy as anchor points for straps and ropes when boards are installed, giving both flexibility and added tie-down options.

• Build removable trailer walls or stake sides using treated lumber
• Add tie-down locations along flatbeds and utility trailers
• Create temporary cargo partitions without drilling into the deck

How do I install these pockets safely and what should I prep for welding?

Installation requires welding to a clean, compatible metal surface and should be performed by someone experienced with structural welding. Prepare the mounting area by removing paint, rust, and contaminants so the weld penetrates fully and yields maximum strength.

• Ensure surfaces are clean, bare metal for welding
• Position pockets with correct spacing for your boards and intended loads
• Use appropriate welding techniques and qualified personnel for safety

Who is this for? These A.A stake pockets suit trailer builders, fleet maintenance teams, farmers, landscapers, and do-it-yourselfers who need a durable, weld-on solution for mounting 2x4 stakes and creating removable sides or tie-down points. If you require a heavy-gauge, permanent anchor that accepts common lumber and supports frequent loading, this 12-pack gives the parts and flexibility to outfit multiple trailers or projects.