-
AGM-Products.com Brake Bleeder Kit — 3L Pressure Bleeder with Gauge & RegulatorVendor:AGM-Products.comThe AGM Brake Bleeder Kit is a 3-liter pressure bleeding system that lets one person flush brake fluid and remove air without pumping the brake pedal. This compact, portable kit uses regulated positive pressure to push fresh fluid through your brake system while capturing...
- £173.19
- £173.19
- Unit price
- per
-
BILITOOLS Pneumatic Brake Caliper Compression Tool Kit — 23 Adapters, 360° Swivel Handle, Heavy-Duty CaseVendor:BILITOOLSBILITOOLS Pneumatic Brake Caliper Compression Tool is a heavy-duty air-powered piston wind-back kit with 23 adapters and a 360° swivel handle designed to safely and quickly retract disc brake caliper pistons for pad replacement. This kit brings an air-driven approach to a common workshop...
- £118.50
- £118.50
- Unit price
- per
-
Capri Tools Vacuum Brake Bleeder CP21029 — 40" Silicone Hose, Universal Adapter & SilencerVendor:Capri ToolsThe Capri Tools CP21029 Vacuum Brake Bleeder uses compressed-air-driven venturi vacuum to safely bleed and flush hydraulic brakes and clutches with a 40-inch silicone hose and universal adapter. This compact brake bleeder leverages your shop’s compressed air to create a steady vacuum that pulls...
- £128.54
- £128.54
- Unit price
- per
-
SEEKSELF Brake Line Flaring Tool Kit 37° & 45° — 3/16–3/8" Tubing, Single/Double/Bubble FlaresVendor:SEEKSELFSEEKSELF's Professional Brake Line Flaring Tool Kit makes precise 37° and 45° single, double and bubble flares in steel, stainless and softer tubing quickly and reliably. Whether you're rebuilding brake lines, repairing hydraulic tubing, or preparing hard lines for a custom installation, this compact...
- £185.48
- £185.48
- Unit price
- per
-
Orion Motor Tech 5-Ton Bushing Driver & Bearing Press Kit — 52-Piece Drivers, 14-Piece Puller, Blow-Molded CaseVendor:Orion Motor TechOrion Motor Tech's OMT 5-ton Bushing Driver Tool & Bearing Press Kit is a complete 2-in-1 service set designed to press, remove, and install bushings, bearings, seals, gears, pulleys and steering components safely and accurately. Keep everyday vehicle maintenance faster and cleaner with this...
- £215.60
- £215.60
- Unit price
- per
-
Orion Motor Tech 34pc Master Brake Caliper Tool Kit — 11 Adapters & Line Cutter, Screw CompressorVendor:Orion Motor TechOrion Motor Tech’s 34-piece Master Brake Caliper Tool Kit is a complete, durable set for compressing caliper pistons, cutting and bending brake lines, and supporting full caliper service jobs. This all-in-one kit combines heavy-duty compressor plates, eleven adapter fittings, and a compact brake line...
- £119.61
- £119.61
- Unit price
- per
-
SEEKSELF Brake Line Flaring Tool Kit – Vise-Mounted 45° Single/Double/Bubble Flares, 4 Die Sizes (3/16"–3/8")Vendor:SEEKSELFSEEKSELF Professional Brake Line Flaring Tool Kit is a vise-mounted flaring set that forms 45° single, double and bubble flares on steel, stainless and soft metal tubing for automotive and plumbing work. This compact kit brings workshop-grade flaring capability to home garages and professional...
- £125.19
- £125.19
- Unit price
- per
-
Titan 3/16-Inch Double Flaring Tool Kit — Compact SAE Brake Line Flare Tool for In-Vehicle UseVendor:TitanThe Titan 51535 is a compact 3/16-inch double flaring tool kit designed to create reliable inverted 45° SAE double flares for automotive brake line repair, usable in tight spaces or mounted in a vise. Designed for DIY mechanics and professional technicians, this portable flaring...
- £62.99
- £62.99
- Unit price
- per
-
Orion Motor Tech 2.5L One-Person Pressure Brake Bleeder Kit with 42mm Adapter — 2.5L Tank & Pressure GaugeVendor:Orion Motor TechThe Orion Motor Tech OMT 2.5L One-Person Pressure Brake Bleeder Kit is a single-operator brake bleeding system with a 42mm adapter that pressurizes and extracts fluid to remove air and debris from your brake lines. This compact kit is designed to let one person...
- £83.90
- £83.90
- Unit price
- per
-
Orion Motor Tech 2.5L Pressure Brake Bleeder Kit — 43.5mm Adapter, One-Person Pump & 500mL BottleVendor:Orion Motor TechThe Orion Motor Tech OMT 2.5L Pressure Brake Bleeder Kit is a one-person pressure bleeder and fluid extractor with a 43.5mm adapter for many European and domestic vehicles. Whether you’re flushing old brake fluid, removing air pockets, or prepping a brake system for service,...
- £88.36
- £88.36
- Unit price
- per
-
FQRANBO Tube Straightener for 3/16"–1.0" Tubing — Aluminium Hand Tool, Roller Action for Brake & Fuel LinesVendor:FQRANBOFQRANBO Tubing Straightener is a compact, heavy-duty tool that smooths bends in 3/16"–1.0" diameter tubing quickly and reliably. Whether you work on brake lines, fuel lines, HVAC runs, or custom metalwork, this tube straightener handles soft aluminum, copper, stainless steel, and many plastics without...
- £80.55
- £80.55
- Unit price
- per
-
Hinyefir LT890/LT895 Truck Brake Spring Removal Tool — Eaton-style Anchor Spring Installer, Hardened SteelVendor:HinyefirHinyefir LT890/LT895 is a heavy-duty steel tool designed to safely and quickly remove and install Eaton-style truck brake shoe anchor springs by one technician. This specialized spring removal and installation instrument is built for technicians who work on commercial air brakes and need a...
- £78.32
- £78.32
- Unit price
- per
-
E-cowlboy Detroit Diesel DD13 DD15 DD16 Engine Brake Adjustment Kit - 4-Piece Heavy-Duty Steel with 4.6mm & 4.1mm ToolsVendor:E-cowlboyProfessional 4-piece adjustment kit for Detroit Diesel DD13, DD15 and DD16 engines that includes 4.6mm and 4.1mm engine brake tools, a barring/turning tool and a TDC locating pin for precise timing and brake setup. This E-cowlboy tool set was engineered to replace factory items...
- £95.06
- £95.06
- Unit price
- per
-
WORKPRO Vacuum Brake Bleeder Kit 3L — Single-Operator Pneumatic Bleeder with 22 Adapters & Reinforced TankVendor:WORKPROWORKPRO 3L Vacuum Brake Bleeder Kit is a pneumatic, single-operator system that pulls and stores up to 3 liters of brake fluid for fast, safe brake bleeding and fluid changes. Designed for DIYers and professional technicians, this WORKPRO kit combines a reinforced 3L reservoir,...
- £78.32
- £78.32
- Unit price
- per
-
Capri Tools 1/4 in Double Flaring Tool — 45° SAE Double Flare, Compact Portable DesignVendor:Capri ToolsCapri Tools 1/4 in. Double Flaring Tool makes fast, consistent 45° SAE double flares on 1/4" tubing with a portable, all-in-one design. This hand flaring tool is built for shop or roadside use where reliable double flares are required for brake, fuel, or hydraulic...
- £61.55
- £61.55
- Unit price
- per
-
Wostore Brake Line Flare Kit 7‑Die 3/16–5/8 in — SAE Double & ISO Bubble, cutter & reamer includedVendor:WostoreThe Wostore Brake Line Flare Kit is a compact, workshop-ready set that cuts, deburrs and forms single, SAE double and ISO bubble flares on 3/16"–5/8" and metric tubing. This complete flaring kit combines a heavy-duty yoke, hardened flaring bar, seven SAE dies plus metric...
- £89.48
- £89.48
- Unit price
- per
-
Orion Motor Tech 17pc Drum Brake Tool Kit — Spring Compressors, 8 Adjusting Spoons & Carry CaseVendor:Orion Motor TechThe Orion Motor Tech 17-piece drum brake tool kit provides every hand tool needed to safely remove, install, and adjust drum brake components on a wide range of vehicles. Whether you're a DIY mechanic or a professional technician, this comprehensive kit organizes purpose-built tools...
- £105.10
- £105.10
- Unit price
- per
-
MOTRAVA 3L Brake Bleeder Kit — One-Person Pneumatic Vacuum Bleeder with 19 Adapters & 1L RefillVendor:MOTRAVAMOTRAVA 3L Brake Bleeder Kit is a one-person, compressor-powered pneumatic vacuum system with a large 3-liter reservoir and 19 master cylinder adapters for fast, clean brake and clutch fluid changes. If you service hydraulic brake or clutch systems, this kit speeds up bleeding and...
- £100.64
- £100.64
- Unit price
- per
-
DPTOOL Pneumatic Brake Caliper Compression Tool Kit — 23pc with 22 Adapters, Carbon Steel PumpVendor:DPTOOLDPTOOL 23Pc Pneumatic Brake Caliper Compression Tool Kit is an air-powered set that compresses and resets brake caliper pistons quickly and safely for a wide range of passenger vehicles. This compact kit pairs a pneumatic disc brake pump with 22 interchangeable adapters so you...
- £95.06
- £95.06
- Unit price
- per
-
3M Brake Hub Cleaning Disc Holder 07545 — 1/4" Shank, Hollow Centre for Wheel Stud Protection, Up to 20,000 RPMVendor:3MThe 3M Brake Hub Cleaning Disc Holder 07545 secures brake hub cleaning discs to die grinders or right-angle disc sanders so you can remove rust and corrosion around wheel studs without damaging threads. This compact holder is built for automotive and industrial technicians who...
- £47.70
- £47.70
- Unit price
- per
-
DNA MOTORING 8-Piece Drum Brake Service Kit — Blue Hard Case, Heat‑Treated Chrome ToolsVendor:DNA MOTORINGDNA MOTORING TOOLS-00244 is an 8-piece drum brake service kit with heat-treated chrome-plated pliers, compressors, adjustment spoons, and a hard carrying case for convenient brake shoe and spring work. This compact blue kit gathers the essential hand tools technicians and DIYers need to service...
- £69.39
- £69.39
- Unit price
- per
-
DAYUAN 3L Hand Brake Fluid Bleeder Kit — Single-Operator Brake Bleeding for European Cars, Quick-Release ChuckVendor:DAYUANDAYUAN 3L Hand Brake Fluid Bleeder Kit is a single-operator system that captures up to three liters of brake fluid and lets you bleed handbrake and hydraulic lines without a helper. If you service European vehicles or any car with hydraulic parking brakes, this...
- £68.25
- £68.25
- Unit price
- per
-
BILITOOLS Universal 30 Ton Hydraulic Shop Press Support Block & Plate Kit — Adjustable Three-Point Support for Bearings and HubsVendor:BILITOOLSBILITOOLS Universal 30 Ton Hydraulic Shop Press Support Block Plate Kit is a complete support-block and plate system that gives workshops a stable, adjustable platform for pressing bearings, hubs, bushings and other heavy components with a 30-ton hydraulic press. When you need repeatable alignment...
- £184.01
- £184.01
- Unit price
- per
-
RIDGID 41162 377 37° SAE Flaring Tool — Non-Ratcheting, Made in USAVendor:RIDGIDRIDGID 41162 377 is a precision, non-ratcheting flaring tool engineered to form accurate 37-degree SAE flares for tubing and fittings. This compact flaring tool is built for technicians and hobbyists who need consistent 37° SAE flares on soft metal tubing. Manufactured in the United...
- £212.39
- £212.39
- Unit price
- per
Get the guides, first
Seasonal UK driving advice and a heads-up when new stock lands. No spam, unsubscribe any time.
























