A-Premium Front Sway Bar Link for Lexus AWD - Direct Replacement, Forged Steel Sealed Ball Joint

A-Premium front sway bar link is a brand-new, direct-replacement stabilizer link engineered to restore steering stability and reduce body roll on compatible Lexus AWD vehicles.

This front sway bar link from A-Premium replaces worn or damaged stabilizer links on specified Lexus GS, IS and RC all-wheel-drive models. Built for a precise bolt-on fit, each link uses a forged steel shaft, a sealed ball joint and corrosion-resistant coating to withstand road stress and deliver consistent suspension performance without modification.

Will this sway bar link fit my Lexus and what models are supported?

These links fit specific AWD Lexus model years and trims listed below; they are designed for front left and right installation. Confirm your vehicle year, model and drivetrain before ordering to ensure compatibility.

• Compatible models include: GS300 (2006), GS350 (2007–2020).
• IS series coverage: IS250 (2006–2009; 2010–2015 Base), IS250 (2014–2015 F Sport), IS300 (2016–2022), IS350 (2011–2021 Base; 2014–2021 F Sport).
• RC coverage: RC300 (2016–2022), RC350 (2015–2022).
• Note: These parts fit AWD models only; check reference part numbers K750056, K750055, 4882030100, 4881030080 where needed.

How does this stabilizer link improve handling and reduce noises?

The link’s forged alloy-steel shaft and sealed ball joint deliver high strength and stable pivoting action, reducing chassis flex and unwanted movement. A tight, zero-clearance fit minimizes clunking or knocking sounds commonly caused by worn link joints.

• Forged steel body resists bending and fatigue under load.
• Rust-resistant coating protects against corrosion and road salt.
• Precision ball joint and rubber dust boot prevent grease loss and contamination.
• Pre-greased for smooth articulation out of the box.

What should I expect during installation and maintenance?

A-Premium links are produced to match factory thread sizes, ball angles and mounting positions so installation is straightforward and requires no modifications. They come pre-greased and include the pictured accessories; routine visual inspection helps detect torn dust boots or joint play that would warrant replacement.

• Direct bolt-on design: no drilling or custom fabrication.
• Supplied accessories match OEM-style mounting points.
• Pre-greased joints speed initial break-in and reduce early wear.
• Inspect boots and joints periodically for tears or grease leakage.

When is it time to replace a sway bar link?

Replace the stabilizer link if you hear clunks or knocks over bumps, notice increased body roll in turns, or feel vague steering on rough roads. Visible damage like torn dust boots or leaking grease are clear signs the ball joint is compromised and replacement is needed to restore handling integrity.

• Audible clunks or knocks from front suspension when turning or hitting bumps.
• Excessive body lean or unstable cornering behavior.
• Visible torn dust boots or grease contamination on the joint.
• Floppy or vague steering feel at low speeds or over rough surfaces.

Who is this for: A-Premium’s front sway bar link is intended for Lexus owners and technicians who need a reliable, OEM-style replacement for front stabilizer links on supported AWD GS, IS and RC models. It’s suitable for drivers who want to restore factory handling, reduce noise from worn suspension joints, and avoid the cost and downtime of more extensive suspension repairs.