AFA Tooling Approved for Automotive 2x8 Ramp Kit — Aluminium End Brackets, Rubber Anti-Slip Feet, 1,500 lb Pair Capacity

The AFA Tooling 2x8 Ramp Kit converts standard 2x8 oak boards into a durable, portable ramp system with machined aluminum ends and anti-slip rubber feet supporting up to 1,500 lb total.

This kit provides a lightweight, easy-to-store solution for loading ATVs, lawn tractors, snowmobiles and other small equipment. Designed to clamp onto 2x8 hardwood (recommended: oak), the aluminum brackets and grooved rubber feet secure the board to vehicle beds and dock edges while protecting surfaces and maximizing grip. Assembly is straightforward but depends on the actual 2x8 thickness of your lumber; oak’s 1.37-inch thickness ensures the best fit and rated capacity.

How does this kit hold heavy equipment safely?

The kit’s strength comes from precision-machined aluminum brackets and secure hardware that clamp a 2x8 oak board into a stable ramp. Rubber grooved feet increase traction and protect contact surfaces, while the hardware resists loosening during use. The combined system is rated at 750 lb per bracket or 1,500 lb when used as a matched pair with recommended hardwood.

• Machined aluminum end brackets with grip lines for load stability
• High-grade bolts and fasteners included for secure assembly
• Grooved rubber anti-slip feet for traction and surface protection
• Rated 750 lb per bracket; 1,500 lb total when paired with oak 2x8

Will these fit my 2x8 boards and do I need special lumber?

The ramp kit is manufactured to fit 2x8 oak hardwood with a typical thickness of 1.37 inches. Different wood species and treated softwoods can vary in thickness and might need light trimming for a precise fit. For maximum strength and to reach the published capacity, oak hardwood is recommended over softwood or treated lumber.

• Designed for 2x8 oak hardwood (1.37" thickness)
• Softwoods may require shaving of the board ends for fit
• Oak delivers superior load capacity and long-term durability
• Instructions note wood-type variations—inspect fit before loading

How portable and easy to use is the ramp kit?

Each bracket set weighs about 7 lb, making the kit highly portable and manageable by a single person. The brackets clamp to the board quickly, allowing fast setup and disassembly for storage in a truck or garage. Their compact profile means they won’t take up much room when not in use.

• Lightweight 7 lb bracket sets for one-person handling
• Quick clamp-on assembly for fast ramp creation and removal
• Compact size for easy storage in vehicle or shed
• Durable finish resists weathering during transport and use

What mounting and care tips should I follow?

Secure fitting and routine inspection extend the life and safety of your ramps. Make sure the board-to-bracket fit is tight, especially if using non-oak lumber. Clean the rubber feet of debris and check fasteners before each use to maintain grip and stability.

• Confirm tight fit of oak 2x8 or trim other lumber as needed
• Keep rubber feet free of mud, oil, or ice for best traction
• Inspect bolts and brackets for wear before each load
• Avoid exceeding the 750 lb per bracket / 1,500 lb paired limit

Who this is for: The AFA Tooling 2x8 Ramp Kit is ideal for homeowners, landscapers, small-farm operators and outdoor enthusiasts who need a portable, heavy-duty ramp solution. If you routinely load ATVs, lawn tractors, snowmobiles or other compact machinery and prefer a compact, storable option, this kit paired with oak 2x8 boards offers a reliable balance of portability, grip and rated capacity. Contact AFA Tooling Approved for Automotive for questions or parts support.