ANTENGDATOOL 4" Diamond Polishing Pads 11PC Wet/Dry Kit — High‑Temp 4‑inch Pads for Granite & Marble

This compact set combines seven diamond grit discs, two wool felt finishing pads, a hook-and-loop backing pad and a round shank adapter so you can move from coarse grinding to high-gloss finishing with a single handheld tool. The pads are manufactured to resist elevated temperatures found in dry polishing and are compatible with rotary tools, angle grinders and household drills when matched to the proper thread or adapter.

What grits are included and why do they matter?

The kit contains seven progressive diamond grit discs (50, 100, 200, 400, 800, 1500, 3000) so you can remove scratches and step through increasingly finer finishes. Starting with a lower grit evens out chips and deep abrasions; higher grits refine the surface to a polished sheen.

• Grit 50–200: rapid material removal and edge leveling
• Grit 400–800: smoothing and reducing visible scratches
• Grit 1500–3000: high-gloss finish and mirror-like reflection

How do I use these pads on my polisher or drill?

Each polishing pad has a hook-and-loop backing that makes installation quick and tool-free. The included 5/8"-11 threaded backing pad and 8mm round shank adapter let you connect the kit to many variable-speed polishers, angle grinders or power drills — just confirm your machine’s thread and maximum speed before you start.

• Attach hook-and-loop pad to backing plate, then press the diamond pad into place
• Use the 8mm shank adapter for drill mounting or 5/8"-11 thread for polishers/grinders
• Operate within recommended speeds and swap grits progressively for best results

Can these pads be used wet and dry, and what precautions are needed?

The pads are designed for both wet and dry polishing, offering flexibility depending on the job and workspace. For dry use, they were formulated to tolerate higher temperatures than standard wet-only pads, but you should still control speed and pressure to prevent overheating or premature wear.

• Dry polishing: ideal for quick touch-ups without water management
• Wet polishing: preferred for heavy removal and minimizing dust
• Recommended speed range: 2500–4500 RPM; never exceed 4500 RPM

What surfaces can I restore with this kit?

This 4-inch pad set is suitable for natural and engineered stone plus hard surfaces where controlled polishing is needed. Use it on countertops, floor edges, tiles and small restoration spots where large machines are impractical.

• Granite, marble and quartz countertops
• Terrazzo, concrete and glazed or vitrified tiles
• Stone edges, sinks and small repair areas

Who is this for: DIYers, countertop fabricators, tile installers and handy homeowners who need a portable, economical polishing solution will find this ANTENGDATOOL kit practical. It’s also useful for contractors who want a compact set for on-site touch-ups or for anyone upgrading from coarse grinding to fine finishing without investing in large wet-polishing systems. Always match the pad size and machine speed to the task and inspect pads regularly for wear.