Briggs & Stratton SAE 30 Oil Change Kit — 66 oz Oil, 696854 Filter & Fuel Treatment

Keep small engines running smoothly with a purpose-built service kit from Briggs & Stratton. This pack combines factory-formulated 30W engine oil with a model-specific filter and a concentrated fuel treatment so you can change oil, refresh the filter, and treat stored or treated gasoline in one straightforward service session. Everything is sized for consumer lawn mowers, pressure washers, and other common power equipment to simplify upkeep and extend engine life when used as directed.

What exactly is included in this oil change kit?

The kit bundles all the parts needed for a typical engine service: two bottles of oil that together total 66 ounces, one OEM 696854 oil filter, and a 2-ounce bottle of 3-n-1 Advanced Fuel Treatment. An absorbent pad is also supplied to catch drips and keep your work area tidy.

• One 48 oz bottle of Briggs & Stratton SAE 30 engine oil (part 100028)
• One 18 oz bottle of Briggs & Stratton SAE 30 engine oil (part 100005)
• One Briggs & Stratton oil filter, model 696854
• One 2 oz 3-n-1 Advanced Fuel Treatment (treats up to 10 gallons of gasoline)
• One oil absorbent pad for spill control

How do I use the kit for an oil change and fuel treatment?

Perform an oil change by warming the engine, draining the used oil, replacing the filter, and refilling with the supplied SAE 30 oil to the manufacturer’s recommended level. Add the specified dose of fuel treatment to fresh or stored gasoline according to the bottle directions to help clean fuel system components and stabilize fuel for storage.

• Warm engine before draining to improve oil flow
• Replace old filter with the 696854 and hand-tighten per manufacturer guidance
• Refill with the combined 66 oz of SAE 30 oil to specified capacity
• Add 2 oz fuel treatment per 10 gallons of gas, or follow label instructions for smaller volumes

Which machines and engines will this kit work with?

This kit is designed for horizontal shaft small engines and is commonly compatible with many Briggs & Stratton lawn mowers, generators, pressure washers, and similar outdoor power equipment that call for SAE 30 (30W) oil. Always verify your engine’s oil weight and filter compatibility in the owner’s manual before starting a service.

• Primarily for older and walk-behind mower engines specifying SAE 30
• Suitable for many single-cylinder, air-cooled small engines
• Check owner's manual for capacity and filter part confirmation

What are the benefits of using these Briggs & Stratton components together?

Using manufacturer-formulated oil and a matched OEM filter helps ensure the oil viscosity, additives, and filtration align with the engine’s needs. The included fuel treatment helps reduce fuel-related deposits and stabilizes gasoline, which is helpful for seasonal storage or intermittent use.

• Factory-formulated oil reduces friction and supports consistent performance
• OEM filter 696854 fits as intended for reliable filtration
• Fuel treatment helps preserve fuel quality and minimize carburetor buildup

Who is this for? This all-in-one service pack is ideal for homeowners, landscapers, and DIY mechanics who perform routine maintenance on Briggs & Stratton–equipped lawn mowers and other small engines. It’s especially useful if you want factory-specified oil and a genuine replacement filter plus a simple fuel treatment in a single purchase for seasonal tune-ups and storage preparation.