Comp Cams Cam & Lifter Installation Lube, 8 oz Bottle — Heavy‑Duty Clinging Film

COMP Cams 153 Cam & Lifter Installation Lube is a heavy‑duty, purpose‑formulated lubricant designed to protect cam lobes, lifter bottoms, and distributor gears during the critical initial start‑up and break‑in period.

When a new camshaft or lifters are installed, the first few minutes of operation determine long‑term wear. COMP Cams designed this assembly lube to cling to metal surfaces, resist fling‑off, and provide immediate film strength so moving parts are lubricated while engine oil pressure builds. The 8‑ounce bottle (part number 153) is sized for shop use and individual installations, making it a practical addition to any rebuild or cam swap.

How should I apply this lube for a new cam and lifters?

Apply generously to every cam lobe and to the bottom of each lifter before installation. Also coat the distributor drive gear and any contact surfaces that will see sliding motion during the initial start‑up. Proper coverage is essential to deliver the temporary high‑film protection the product provides.

• Spread a liberal bead along each cam lobe surface
• Smear a thin, even layer on the underside of each lifter
• Coat the distributor gear and shaft where it meshes
• Keep the bottle upright and use the nozzle for targeted application

What benefits does COMP Cams Cam & Lifter Installation Lube offer during break‑in?

This assembly lubricant protects metal‑to‑metal contact until engine oil reaches full pressure and the engine achieves operating temperature. It reduces wear and scuffing risk during the most vulnerable moments, helping components seat and mate properly without relying solely on initial oil circulation.

• Instant high‑film strength right after assembly
• Clings to vertical and horizontal surfaces to prevent fling‑off
• Formulated specifically for camshaft and lifter conditions
• Easy to apply from an 8 oz. bottle suitable for shop use

Will this affect my cam break‑in procedure or engine oil choice?

The product is intended to supplement, not replace, your established break‑in routine. Use as directed during assembly, then follow the cam manufacturer’s recommended break‑in RPMs, duration, and oil type for final seating. After the initial run and break‑in period, normal engine oil will take over lubrication duties.

• Use during assembly only; it is flushed by engine oil later
• Follow specific camshaft break‑in RPM and time guidelines
• Choose break‑in or manufacturer‑recommended oil for first start
• No changes required to standard post‑installation procedures

How much product do I need and when is the 8 oz. bottle ideal?

An 8‑ounce bottle of COMP Cams 153 covers most single‑engine cam and lifter installations when used properly. It’s convenient for individual rebuilds, short‑run shop use, or as a staple in a performance parts toolbox where precise, targeted application is needed.

• One 8 oz. bottle is typically enough for a single full cam and lifter install
• Compact bottle fits cleanly into a mechanic’s tool area or parts cart
• Part number 153 simplifies reordering and inventory tracking
• Works for a wide range of domestic and performance engines

Who is this for? COMP Cams 153 Cam & Lifter Installation Lube is aimed at engine builders, professional mechanics, and experienced DIY enthusiasts installing new camshafts, lifters, or distributor components. If you perform engine assembly, performance upgrades, or regular rebuilds and want immediate, reliable protection during the first crucial moments of operation, this dedicated assembly lube is a practical, shop‑ready choice.