Corroseal Rust Converter Cleaner Degreaser 1 Qt — Water-Based, Non-Flammable Metal Prep

Corroseal 80022 is a water-based, non-solvent cleaner and degreaser designed to prep rusted and soiled metal for Corroseal rust converter application in a safe, non-flammable formula.

This one-quart Corroseal 80022 cleaner loosens oils, grease, and general soils using a mild pH, making it suitable for most water-safe surfaces. It’s formulated to suspend contaminants for simple rinsing or wipe-away, and can be diluted to match light cleaning tasks or used concentrated for heavier soiling. Because it’s non-solvent, non-corrosive, and non-flammable, 80022 is easy to handle on job sites and in workshops where safety and surface compatibility matter.

How does Corroseal 80022 prepare rusted metal for a rust-converting treatment?

This cleaner removes oil, grease, and loose dirt that would otherwise block the rust converter from bonding to the metal surface. By lifting soils into suspension, it exposes the underlying rust so the rust converter can chemically interact with the metal more evenly.

• Breaks down oils and grease for full removal
• Lifts dust and particulates that mask corrosion
• Leaves a water-rinseable surface for immediate rust-converter application
• Non-corrosive formula preserves metal for treatment

Can I use Corroseal 80022 on surfaces other than metal?

Yes—80022 is safe for most water-safe surfaces thanks to its mild pH and non-solvent formulation. It can be diluted for general cleaning tasks across concrete, brick, equipment, filters, and floors without harsh chemical action.

• Dilute for light cleaning of concrete or brick
• Use full strength on greasy equipment and heavily soiled metal
• Suitable for air filter maintenance when used per instructions
• Safe on water-compatible painted or finished surfaces when tested first

What makes this cleaner safer to use than solvent-based degreasers?

Because 80022 is water-based and non-flammable, it reduces fire risk and strong solvent fume exposure on job sites. Its non-corrosive chemistry also minimizes damage to metal and adjacent materials during prep work, and it can be handled with standard PPE without specialized ventilation in most situations.

• Non-flammable for safer storage and transport
• Non-solvent reduces harsh vapor hazards
• Mild pH less likely to etch or damage water-safe surfaces
• Compatible with routine workshop safety practices

How should I apply and dilute Corroseal 80022 for best results?

Application depends on soil level: dilute for light general cleaning, use full strength for heavy grease or equipment degreasing. Apply by brush, mop, spray, or soaking, agitate if needed, then rinse or wipe away residues before applying Corroseal rust converter.

• Light soils: dilute according to label directions and apply with mop or sprayer
• Heavy grease: apply concentrated, allow dwell time, agitate, then rinse
• Spot cleaning: use brush or cloth to loosen deposits and wipe clean
• Always test on a small area when using on painted or finished surfaces

Who is this for? Corroseal 80022 is aimed at contractors, restoration pros, mechanics, and DIYers who need a safe, effective way to remove oils and soils before applying rust-converting products. It’s useful in workshops, garages, industrial sites, and maintenance crews that require a non-flammable cleaner compatible with a range of water-safe surfaces. If you want to improve adhesion and performance of Corroseal rust converter while minimizing solvent hazards, 80022 provides a practical, adaptable prep solution.