DABAZUALY Stator Kit for Kohler KT-Series 15/20 AMP — Complete Ignition & Charging Kit (Coils, Plugs, Regulator)

Complete replacement stator kit for Kohler 7000/6600 series engines that restores charging and ignition components with a single purchase.

This DABAZUALY 237878-S kit bundles the key electrical parts you need to bring Kohler KT-series engines back to reliable operation: a 15/20 AMP stator, two ignition coils, two spark plugs, and a voltage regulator. It’s engineered to match the factory replacement part numbers and cross-references commonly used in commercial mowers and utility engines, so you won’t have to source separate components across different suppliers.

Which Kohler models will this kit fit?

The kit is designed for Kohler 7000 Series engines and is also compatible with several 6600 Series models. Use it for KT715 through KT745 variants and many sub-model configurations from manufacturers such as Toro, MTD, Exmark, SCAG, Kubota and more.

• Direct fit for KT715, KT720, KT725, KT730, KT735, KT740, KT745 engines
• Also fits KT600, KT610, KT620 in the 6600 series
• Covers OEM cross numbers like 237878-S and 32-584-06-S
• Works with many branded chassis: Toro, MTD, Exmark, SCAG, Kubota, Spartan

What parts come in the box and why they matter?

This package supplies everything required to service the engine’s charging and ignition system—no last-minute trips to parts stores. Each component addresses a specific failure point so the engine can start reliably and maintain battery charge during operation.

• 1 x 15/20 AMP stator — generates charging current for the electrical system
• 2 x ignition coils — provide stable spark to both cylinders where applicable
• 2 x spark plugs — fresh electrodes for consistent combustion
• 1 x voltage regulator/rectifier — stabilizes and converts voltage for battery charging

How difficult is the installation and what should I prepare?

Installation difficulty ranges from moderate to advanced depending on your experience with small-engine electrical work. You’ll need basic hand tools, service manual access, and time to properly align the stator and set ignition timing if required. If you’re comfortable removing flywheels and ignition modules, this is a straight-forward replacement; otherwise consider professional assistance.

• Required tools: puller for flywheel, torque wrench, screwdrivers, socket set
• Recommended: factory service manual for timing and torque specs
• Typical time: 1–2 hours for experienced technicians, longer for first-timers
• Inspect wiring harness and connectors while replacing parts to avoid future failures

Will this kit fix charging or hard-start problems?

Replacing worn stators, coils, plugs and regulator often resolves issues related to poor charging and intermittent ignition. This kit supplies direct-fit components intended to match Kohler part references, but diagnostics should confirm root cause before replacing parts unnecessarily.

• Addresses common symptoms: weak charge, dead battery, misfire, or no-start
• Use a multimeter to verify charging voltage and coil primary resistance
• If problems persist, test harness, kill switch, and battery condition as well

Who is this for: This DABAZUALY 237878-S kit is aimed at fleet managers, landscapers, and experienced DIY mechanics who service Kohler KT-series engines and want a complete electrical replacement in one package. It’s suitable for commercial and residential equipment owners who prefer an OEM-referenced solution to restore ignition reliability and charging performance without sourcing separate parts.