Derale Power Steering Cooler Kit 13200 — Black compact finned cooler, 1/2" copper tubing for lower fluid temps

Derale 13200 is a black power steering cooler kit that uses 1/2" copper tubing expanded into aluminum cooling fins to lower fluid temperature and protect the steering pump and seals.

If you drive heavy loads, tow, or operate a vehicle under high heat, power steering fluid can overheat, accelerating seal wear and pump failure. The Derale 13200 Power Steering Cooler Kit adds a compact, effective heat exchanger inline with your steering system to help manage temperatures and extend component life without complicated plumbing or electric fans.

How does the Derale 13200 reduce power steering heat?

The cooler passes steering fluid through 1/2" copper tubing that is expanded into a matrix of aluminum cooling fins, creating more surface area for heat to dissipate into the air. The all-metal construction transfers heat efficiently and the finned design increases airflow contact while driving.

• 1/2" copper tubing bonded to aluminum fins for improved thermal transfer
• Compact fin array increases surface area without bulky installation
• Airflow from vehicle motion aids passive cooling, no electrical connection needed

What fittings and plumbing does the kit use?

The unit provides 11/32" hose barb inlets that match common power steering hose sizes for a straightforward inline installation. You typically route the steering lines into the cooler and secure them with proper clamps or reusable fittings depending on your hose type.

• 11/32" hose barb inlets fit standard power steering hoses
• Works with typical hose clamps or reusable fittings (clamps not always included)
• Designed for inline placement between pump and rack/gearbox

Will the Derale 13200 extend component life and reduce failures?

By lowering peak fluid temperatures, the cooler reduces the thermal stress placed on seals and the power steering pump. Cooler operating temperatures slow fluid degradation and help preserve internal pump tolerances, which can translate into fewer heat-related failures over time.

• Helps reduce heat-related pump and seal wear
• Can slow fluid breakdown caused by sustained high temperatures
• May decrease the frequency of overheating-related maintenance

How difficult is installation and where does it mount?

The Derale 13200 is designed for relatively simple, do-it-yourself installation in most vehicles. It mounts in a location with good airflow—commonly in front of the radiator or near the condenser—and connects inline with the power steering hoses using the supplied or existing clamps.

• Compact footprint fits in congested engine bays
• Mount to any secure bracket or structure with airflow exposure
• Tools required are basic: wrenches, clamps, hose cutters, and mounting hardware

Who is this cooler kit best for? The Derale 13200 is aimed at drivers who tow, haul, off-road, or operate vehicles in hot climates and want a simple, passive way to manage power steering temperatures. It’s appropriate for mechanics, fleet operators, and enthusiast DIYers seeking to protect pumps and seals with a robust copper-and-aluminum heat exchanger that installs inline without electrical components.