DeVilbiss StartingLine HVLP Auto Painting Kit — 2-Gun with 1.3/1.5/1.8mm Tips and Carry Case

The DeVilbiss StartingLine HVLP Complete Auto Painting and Priming Kit 802343 is a two-gun spray system that provides a full-size gravity-feed finish gun, a full-size priming gun, accessories, and a carry case for DIY automotive painting and refinishing.

This kit combines a 1.3mm finish/gravity feed gun for basecoat and clearcoat work and a 1.8mm priming gun for thicker primers and sealers, plus a 1.5mm setup for single-stage coatings. Built to operate at 30 PSI inlet (delivering ~10 PSI at the air cap and 13 CFM), it’s designed to help hobbyists and home mechanics achieve professional-style spray patterns while keeping material waste low and atomization efficient. The package includes practical accessories for setup and upkeep so you can start spraying sooner and maintain the tools over time.

Which spray tips come with the kit and what coatings are they best for?

The kit includes three fluid tips: 1.3mm for finish coats, 1.5mm for single-stage paints and light primers, and 1.8mm for priming and heavier materials. Each tip targets a specific viscosity range so you can match the gun to the coating for smoother atomization and fewer runs.

• 1.3mm finish tip — ideal for basecoat, clearcoat, and light viscosity coatings.
• 1.5mm single-stage tip — for single-stage paints, sealers, and light-to-medium viscosity materials.
• 1.8mm priming tip — suited to primers, thicker sealers, and heavier latex or oil-based products.

How does the DeVilbiss StartingLine system perform with typical shop air supplies?

Both guns are specified to run from a 30 PSI inlet supplying about 13 CFM and producing roughly 10 PSI at the air cap. That means the kit performs reliably with common small-shop compressors when set up correctly, offering consistent spray pressure for even coats.

• 30 PSI inlet requirement — compatible with many portable compressors.
• ~10 PSI air cap pressure — optimized for HVLP atomization and reduced overspray.
• 13 CFM air volume — ensures steady flow for continuous spraying on moderate panels.

What accessories are included and how do they help with setup and maintenance?

The kit ships with an air regulator and gauge, a cleaning brush set, a maintenance wrench, and a blow-molded carrying case so you have the essentials to tune spray pressure, keep components clean, and transport the guns safely. These extras reduce downtime and protect your investment.

• Air regulator with gauge — fine-tune inlet pressure for consistent spray patterns.
• Gun cleaning brushes and wrench — simplified teardown and proper maintenance.
• Blow-molded carrying case — organizes guns, tips, and accessories for storage and transport.

Are parts and rebuild kits available if I need repairs?

DeVilbiss offers rebuild kits and replacement parts for the StartingLine series so you can service wear items like needles, seats, and tips. Keeping spares on hand helps extend service life and restore factory performance if damaged or worn.

• Rebuild kits available — replace needles, seals, and small parts.
• Individual replacement tips and cups — swap sizes or refresh worn components.
• Manufacturer support — guidance for part numbers and service intervals.

Who is this for: The DeVilbiss StartingLine HVLP Complete Kit 802343 is aimed at do-it-yourselfers, hobbyists, and small-shop technicians who want a two-gun solution for full refinishing jobs without stepping up to industrial equipment. If you need a compact, transportable set that covers finish coating and primer work, includes basic maintenance tools, and runs on common compressor setups, this kit provides a balanced mix of capability and value.

Made in TW. One-year limited warranty. Follow all safety and ventilation guidelines when spraying coatings.