DICMIC Fuel Tank Spin-On Filter Kit 3/4" NPT — 30-Micron Cartridge, 25 GPM

The DICMIC 30-micron spin-on fuel tank filter kit is a heavy-duty particulate filter assembly designed to protect pumps and engines in construction and agricultural equipment by removing dirt, silt and corrosion debris.

This compact filter kit combines a cast-aluminum 1" NPT head with a 3/4" street elbow, a 3/4" x 7" nipple and a spin-on 30-micron cartridge to deliver reliable protection for gasoline, diesel and kerosene systems. Built for on-site work, the assembly supports up to 25 gallons per minute and 50 PSI maximum working pressure, giving fleets and equipment owners a balance of flow capacity and fine filtration where contamination control matters.

How does the DICMIC kit protect fuel systems on heavy equipment?

The spin-on cartridge traps particulate down to 30 microns, stopping abrasive contamination that wears pumps and injectors. Installing this filter ahead of the pump reduces maintenance frequency and prevents costly component failures caused by silt, rust and dirt.

• 30-micron particulate element captures small debris before it reaches the pump
• Cast-aluminum 1" NPT head resists corrosion in rough environments
• Spin-on design enables quick replacement without special tools
• Compatible with gasoline, diesel and kerosene systems used on job sites

What flow and pressure limits should I expect from this filter?

The DICMIC assembly is rated for a flow of up to 25 GPM and a maximum pressure of 50 PSI, making it suitable for many transfer and supply situations on medium- to heavy-duty equipment. It balances fine filtration with adequate flow for pumps commonly found on construction and agricultural machines.

• Flow rate: 25 gallons per minute (GPM)
• Maximum operating pressure: 50 PSI
• 30-micron filtration to retain particulate without overly restricting flow
• Intended for in-field fuel supply and pump protection tasks

How does the kit fit into my existing fuel plumbing?

This kit includes multiple threaded fittings to simplify integration with standard fuel lines: a 1" NPT filter head and a 3/4" street elbow plus a 3/4" x 7" nipple to bridge common configurations. The included hardware makes it straightforward to mount the filter vertically or horizontally depending on space and flow direction.

• Thread sizes: 1" NPT filter head with included 3/4" fittings
• Hardware provided: 3/4" street elbow and 3/4" x 7" nipple
• Spin-on cartridge allows simple service without disassembling head fittings
• Mounts to tanks, manifolds or pump inlets with standard NPT threads

What fuels can I use with the DICMIC filter, and what should I avoid?

The filter is recommended for gasoline, diesel and kerosene systems commonly used in construction and agricultural equipment. It is not designed for water-based fluids, aviation fuels, racing fuels or other specialty blends that require different materials and filtration methods.

• Recommended: gasoline, diesel, kerosene
• Not for use: water-based products, aviation fuels, race fuels
• Avoid corrosive or highly volatile blends not specified by the manufacturer
• Check compatibility if using fuel additives that change fluid properties

Who this is for: The DICMIC 30-micron spin-on fuel tank filter kit is aimed at contractors, farmers and fleet managers who need a durable, serviceable filter to protect pumps and fuel systems on worksite equipment. If you operate medium- to heavy-duty vehicles or stationary pumps that use gasoline, diesel or kerosene and want a practical filtration solution with straightforward plumbing options, this kit delivers a field-ready balance of filtration efficiency, flow capacity and easy maintenance.