EAGLE KING PRODUCTS 12V LED Rectangular Submersible Left Tail Light — 22 LEDs, Waterproof DOT/SAE Compliant

EAGLE KING PRODUCTS 12V LED left rectangular submersible tail light is a waterproof, DOT/SAE‑compliant replacement for driver‑side trailer, RV, camper or boat lighting featuring 22 long‑life LEDs.

This left (driver side) replacement tail light combines stop, tail, turn and license illumination in one sealed, corrosion‑resistant housing. It is designed for under‑ or over‑80‑inch applications and meets applicable DOT/SAE requirements for visibility and mounting. The compact rectangular lens measures 204 × 73 × 71 mm (8.03" × 2.87" × 2.8" deep) and uses efficient LEDs rated for up to 100,000 hours, drawing far less power than incandescent bulbs.

How durable and weatherproof is this tail light?

The light is molded in a corrosion‑proof housing and fully submersible, built to withstand harsh marine and road environments. Sealed construction prevents water intrusion and the LEDs tolerate long operational lifespans without filament failures common to incandescent units.

• Submersible Class A design for boat and trailer use
• Corrosion‑proof molded housing for saltwater resistance
• Sealed lens and body to block moisture and contaminants
• 22 LEDs rated up to ~100,000 hours for long life

Will this left tail light fit my trailer or RV easily?

The unit is sized for standard rectangular applications and includes a license plate window at the bottom for combined illumination. It replaces driver‑side rear left fixtures and is straightforward to mount using common trailer wiring and fasteners.

• Dimensions: 204 mm (L) × 73 mm (H) × 71 mm (Deep)
• Includes left (LH) tail light with license window
• Designed for under‑ or over‑80‑inch placements
• Compatible with 12V trailer and marine electrical systems

How visible and energy-efficient are the LEDs?

The 22 high‑intensity LEDs deliver bright stop, tail and turn signals with wide viewing angles to enhance safety at night and in poor weather. LEDs consume much less power than traditional bulbs, reducing draw on vehicle electrical systems and improving reliability.

• High‑visibility light output for better road presence
• Lower current draw than incandescent equivalents
• Consistent illumination without filament burnouts
• Meets DOT/SAE standards for retrofitting trailers

What installation or regulatory details should I know?

Installation follows typical trailer light wiring conventions; ensure proper polarity and mounting height to comply with local requirements. The product is designed to meet DOT/SAE rules relevant to trailer lighting, but always verify local codes for specific vehicle class requirements.

• Complies with applicable DOT/SAE standards
• Simple wiring using standard 12V trailer circuits
• Includes single left (driver side) unit with license window
• Verify local regulations for mounting height and spacing

Who is this for: This EAGLE KING PRODUCTS left rectangular tail light suits boat owners, utility trailer and RV operators, and anyone replacing or upgrading a driver‑side rear light with a durable, low‑maintenance LED alternative. It is ideal for customers seeking DOT/SAE compliance, submersible performance for marine use, and an energy‑efficient lighting upgrade that reduces maintenance and increases visibility on the road or water.