Ecarke Cordless Fuel Transfer Pump compatible with DeWalt 20V & Milwaukee 18V — 3.2 GPM Fast, Quiet Refueling

The Ecarke cordless fuel transfer pump is a battery-powered, explosion-resistant pump that quickly moves gasoline, diesel, and lubricants using DeWalt 20V or Milwaukee 18V batteries for cordless refueling.

If you need a fast, portable way to refill tanks at a shop, farm, campsite, or job site without running an extension cord, this lightweight pump delivers up to 3.2 gallons (12 L) per minute while keeping noise and spark risk low. It ships with three North American adapters to fit most common fuel cans, a slim 33 mm nozzle for tight tank openings, and safety features such as auto shut-off and low-fuel protection.

How fast and quiet is this pump for routine refueling?

The Ecarke pump provides a high flow rate while remaining relatively quiet compared with manual siphons or older electric pumps. At 3.2 GPM (12 L/min), it speeds up topping off lawn mowers, generator tanks, motorcycles, and utility equipment.

• 3.2 gallons (12 liters) per minute flow rate for rapid transfers
• Low-noise operation for less disturbance at work sites or camps
• Slim 33 mm nozzle fits many vehicle and equipment filler necks

Will it work with my DeWalt or Milwaukee battery and common gas cans?

This pump accepts DeWalt 20V and Milwaukee 18V battery packs (battery not included) so you can use existing cordless power tools batteries on site. It includes three North American gas-can adapters intended to seal standard cans, but it does not fit every container design.

• Compatible with DeWalt 20V and Milwaukee 18V battery platforms
• Includes 2.0", 2.5", and 2.75" adapters for many North American cans
• Not compatible with metric/European cans, some jerry cans, racing jugs, or openings under 1.2"

What safety and durability features protect against spills and dry running?

Ecarke designed the pump with a sealed, explosion-resistant motor to minimize spark risks during fuel transfer and a low-fuel auto-stop that prevents the unit from running dry. Thickened hose construction and leak-proof fittings reduce the chance of drips and extend service life under regular use.

• Sealed, explosion-proof motor reduces ignition risk
• Automatic shut-off sensor stops flow when the receiving tank is full
• Low-fuel auto-stop activates below ~13 mm to prevent dry running
• Heavy-duty hose and secure connections limit leakage

How easy is it to operate and maintain on remote sites?

One-handed operation with auto-start/stop makes refueling straightforward: insert the nozzle, engage the battery, and the pump senses flow and shuts off automatically. Routine care is minimal—check adapter fit, clean nozzle and hose after use, and store with the original fuel can cap in place to prevent leaks.

• Smart auto shut-off eliminates manual switching during transfer
• 2Ah battery offers several hours of run time (battery sold separately)
• Adapters secure the pump but do not replace the original fuel can cap
• Simple rinse and dry after use extends hose life

Who is this for: The Ecarke cordless fuel transfer pump is aimed at DIYers, landscapers, mechanics, small farmers, boat owners, and contractors who need a portable, fast, and safer way to move gasoline, diesel, or oil where mains power isn’t available. It’s a practical accessory if you already own DeWalt 20V or Milwaukee 18V batteries and use standard North American fuel cans. Before buying, verify your fuel can opening is at least 1.2 inches and that the included adapters fit your can design.