ERRECOM Brilliant UV Refrigerant Leak Dye 250 ml Bottle with Dispenser — Fluorescent, SAE-Compliant

ERRECOM Brilliant is a concentrated fluorescent UV dye in a 250 ml dispenser bottle designed to make refrigerant gas leaks visible under UV light for air conditioning and refrigeration systems.

When pinpointing elusive refrigerant leaks, a reliable tracer dye speeds diagnosis and reduces downtime. ERRECOM Brilliant is formulated and produced in Italy to mix safely with refrigerants and lubricants, show a bright fluorescent trace under UV illumination, and meet SAE J2297 and J2298 guidelines. The product ships in a user-friendly 250 ml bottle with a dispenser and includes identification labels for system tracking.

How quickly will I see a visible leak after adding this dye?

Visible fluorescence often appears within minutes at the leak site when exposed to an appropriate UV lamp, depending on system size and leak rate. Small or slow leaks can take longer to produce a detectable concentration; circulation and system run time improve dispersion.

• Appearance under UV: immediate to several minutes for moderate leaks
• Slow leaks: may require hours or operational cycles to accumulate
• Use recommended UV inspection lamp for best contrast
• Ensure system circulation to distribute dye evenly

Is ERRECOM Brilliant compatible with my refrigeration and vehicle A/C systems?

The dye is designed to be compatible with all common refrigerants, lubricants and electric compressors used in HVAC and automotive A/C systems. It contains no solvents and is safe for recovery stations when used according to instructions, reducing the risk of system contamination.

• Compatible with mineral, PAG and POE lubricants
• Works with standard refrigerants across residential, commercial, and automotive systems
• Non-solvent formula minimizes component stress
• Compliant with SAE J2297 and J2298 for tracer dyes

How do I add and inspect the dye without affecting system operation?

Add the dye using the included dispenser bottle following the system manufacturer’s service procedures and charge recommendations. After charging, run the system to circulate the dye, then inspect suspect areas with a UV lamp in a dim environment for the most reliable detection.

• Use the dispenser for controlled, measured addition
• Operate the system to circulate dye through lines and components
• Inspect joints, hose ends, fittings, and compressor seals under UV light
• Label the system after service using the included identification labels

What safety and regulatory points should technicians know?

ERRECOM Brilliant is formulated to be safe for service use when handled with standard HVAC precautions. It follows SAE tracer dye standards and is made without solvents, but technicians should still use appropriate PPE and follow refrigerant-handling protocols and local regulations.

• Made in Italy with SAE J2297 / J2298 compliance
• No solvents; safe for recovery stations if used properly
• Wear gloves and eye protection during handling
• Follow refrigerant recovery and disposal regulations

Who is this for: ERRECOM Brilliant is intended for HVAC technicians, refrigeration service professionals, and automotive A/C specialists who need a dependable, easy-to-use tracer dye to locate refrigerant leaks quickly. It's also suitable for maintenance departments and contractors looking for a compliant, non-solvent solution to reduce diagnostic time and improve repair accuracy.